2018-07-31 | Jagan Teki | configs: sunxi: Drop CONFIG_SUNXI_USB_PHYS Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Jagan Teki | phy: sun4i-usb: Update PHY#3 rst_mask only for H3_H5 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Jagan Teki | phy: sun4i-usb: Remove usb_clk_cfg set in probe Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Jagan Teki | phy: sun4i-usb: Call phy_passby even for PHY#0 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | video: sunxi: de2: fix SimpleFB node creation when... Acked-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: add support for Pine H64 board Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: add support for Allwinner H6 SoC Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: add DRAM support to H6 Acked-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: add MMC support for H6 Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: add UART0 setup for H6 Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: use sun6i-style watchdog for H6 Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: add clock code for H6 Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: change GIC address on H6 Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: add config for SPL at 0x20000 on H6 Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: change ATF position for H6 Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: change RMR64's RVBAR address for H6 Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: add basic memory map definitions of H6 SoC Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Icenowy Zheng | sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-31 | Simon Baatz | sunxi: enable SATA on Banana Pi M2 Berry Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-17 | Chen-Yu Tsai | sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC... Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Ludwig Zenz | sf: add paired dev info for winbond w25q16jv Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Ludwig Zenz | sf: add Macronix mx25l1633e entry Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Ludwig Zenz | sf: add Gigadevice gd25q16c entry Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Hannes Schmelzer | spi_flash: add a bunch of winbond flashes to id-table Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Siva Durga Prasad... | zynqmp: zcu102: Add qspi driver support for ZynqMP... Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Siva Durga Prasad... | spi: zynqmp_gqspi: Add support for ZynqMP qspi driver Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Vipul Kumar | spi: xilinx_spi: convert to livetree Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Vipul Kumar | spi: xilinx_spi: Added support to read JEDEC-id twice... Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Vipul Kumar | spi: xilinx_spi: Modify transfer logic xilinx_spi_xfer... Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Michal Simek | spi: xilinx: Read reg base address from DTS file Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Lothar Felten | configs: Bananapi_M2_Ultra: enable gigabit ethernet Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Lothar Felten | sunxi: R40: add gigabit ethernet devicetree node Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Lothar Felten | net: sun8i-emac: support R40 GMAC Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Lothar Felten | net: sun8i-emac: set mux and clock by driver data Suggested by Jagan Teki Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Lothar Felten | net: sun8i-emac: fix printing NULL character Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Lothar Felten | sunxi: R40: add gigabit ethernet clocks Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Adam Sampson | dm: sunxi: Use DM for MMC and SATA on all A10 boards Reviewed-by: Jagan Teki <jteki@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Adam Sampson | dm: mmc: sunxi: Add A10/A20 compatible strings Reviewed-by: Jagan Teki <jteki@openedev.com> |
commit | commitdiff | tree |
2018-07-16 | Andre Przywara | sunxi: DT: A64: add proper SoPine baseboard device... Author: Jagan Teki <jagannadh.teki@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-16 | Andre Przywara | sunxi: DT: H3: update board .dts files from Linux Acked-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-16 | Andre Przywara | sunxi: DT: H5: update board .dts files from Linux Acked-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-16 | Andre Przywara | sunxi: DT: update device tree files for Allwinner H3... Acked-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-16 | Andre Przywara | sunxi: DT: A64: update board .dts files from Linux Author: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-16 | Andre Przywara | sunxi: DT: A64: update device tree file for Allwinner... Acked-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-03 | Andre Przywara | arm: timer: sunxi: add Allwinner timer erratum workaround Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-07-03 | Andre Przywara | arm: timer: factor out FSL arch timer erratum workaround Tested-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-06-28 | Marek Vasut | sf: Enable FSR polling on N25Q256(A) Cc: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-28 | Hannes Schmelzer | spi: omap3: fix claim/release bus within DM Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-25 | Ashish Kumar | mtd: spi: Correct parameters for s25fs512s flash Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-25 | Hannes Schmelzer | spi: omap3: fix set_speed and set_mode dm callbacks Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-25 | Hannes Schmelzer | spi: omap3: pre-initialize bus-speed with max. slave... Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-25 | Michael Trimarchi | spi: mxc_spi: Fix chipselect on DM_SPI driver uclass Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-25 | Michael Trimarchi | spi: mxc: Fix compilation problem of DM_SPI class driver Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-25 | Vipul Kumar | spi: zynq_qspi: Fixed incorrect return value error Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-06-16 | Hauke Mehrtens | sun50i: h5: Add initial Orange Pi Zero Plus support Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-16 | Hauke Mehrtens | sun8i: h2: Add initial Orange Pi R1 support Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-04 | Carlo Caione | sf: Add support for gd25q32b gigadevice flash Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-04 | Marek Vasut | sf: Set current flash bank to 0 in clean_bar() Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-04 | Ley Foon Tan | spi: cadence_qspi: Change to use devfdt_get_addr_index() Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-06-04 | Jagan Teki | board: sun50i: Add Amarula A64-Relic initial support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-29 | Marek Vasut | sf: Add Macronix MX25U25635F ID Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-05-29 | Marek Vasut | sf: Add Winbond W25Q256 ID Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | configs: orangepi-prime: Enable USB OTG peripheral... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | arm64: allwinner: h5: orangepi-prime: Sync usb otg... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | configs: orangepi-pc2: Enable USB OTG peripheral mode Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | arm64: allwinner: h5: orangepi-pc2: Order nodes in... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | configs: bananapi-m2-plus: Enable USB OTG peripheral... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | arm64: allwinner: a64: bananapi-m64: Sync usb host... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | ARM: dts: sun8i: a83t: Sync usbphy node from Linux Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | configs: bananapi-m64: Enable USB OTG peripheral mode Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | arm64: allwinner: a64: bananapi-m64: Sync usb_otg node... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jun Nie | sunxi: h3: Sync OTG and HCI nodes from Linux DT Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | sunxi: Drop legacy usb_phy.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | usb: sunxi: Switch to use generic-phy Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: sun4i-usb: Add a sunxi specific function for setting... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | board: sunxi: Use generic-phy for board_usb_cable_connected Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | device-tree-bindings: phy: Sync sun4i-usb-phy bindings Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: sun4i-usb: Add A23 USB PHY config Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: sun4i-usb: Add A33 USB PHY config Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: sun4i-usb: Add A31 PHY config Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: sun4i-usb: Add A10/A13/A20 PHY config Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: sun4i-usb: Add A83T USB PHY config Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: sun4i-usb: Add V3S PHY config Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: sun4i-usb: Add H3/H5 PHY config Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: sun4i-usb: Add id_detect and vbus_detect ops Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | phy: Add Allwinner A64 USB PHY driver Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | musb: sunxi: Add support for H3/H5/A64 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Chen-Yu Tsai | sunxi: clock: Fix OHCI clock gating for H3/H5 Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | musb: sunxi: Use BIT instead of numerical shift Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | musb: sunxi: Add OTG device clkgate and reset for H3/H5 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | sunxi: clock: Fix clock gating for H3/H5/A64 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | musb: sunxi: Add fifo config Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | musb: sunxi: Use simple way to fill musb_hdrc pdata Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | musb: sunxi: Add proper macros instead of numericals Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-28 | Jagan Teki | usb: sunxi: Simplify ccm reg base code Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2018-05-25 | Maxime Ripard | Revert "sunxi: binman: Add U-Boot binary size check" Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-05-16 | Heinrich Schuchardt | spi: fsl_qspi: remove superfluous assignment Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
2018-05-16 | Heinrich Schuchardt | spi: lpc32xx: simplify logical expression Reviewed-by: Jagan Teki <jagan@openedev.com> |
commit | commitdiff | tree |
next |