From fc33705e66cc2c753026f04f92555ad00b709f11 Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Mon, 4 Mar 2013 01:27:20 +0000 Subject: [PATCH] Allow AM335x MPU core clock speed to be specified in the board config file Allow AM335x MPU core clock speed to be specified in the board config file. To use, add the following to the board's config file:- #define CONFIG_SYS_MPUCLK Signed-off-by: Mark Jackson Acked-by: Peter Korsgaard --- README | 4 ++++ arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 7 +++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/README b/README index 7f2506a9b9..a73234efdc 100644 --- a/README +++ b/README @@ -3878,6 +3878,10 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. +- CONFIG_SYS_MPUCLK + Defines the MPU clock speed (in MHz). + + NOTE : currently only supported on AM335x platforms. Freescale QE/FMAN Firmware Support: ----------------------------------- diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h index d748dd2787..2d960070f1 100644 --- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h @@ -21,8 +21,11 @@ #define OSC (V_OSCK/1000000) -/* MAIN PLL Fdll = 550 MHZ, */ -#define MPUPLL_M 550 +/* MAIN PLL Fdll = 550 MHz, by default */ +#ifndef CONFIG_SYS_MPUCLK +#define CONFIG_SYS_MPUCLK 550 +#endif +#define MPUPLL_M CONFIG_SYS_MPUCLK #define MPUPLL_N (OSC-1) #define MPUPLL_M2 1 -- 2.25.1