From f9aa41023bd9f684d5d2ad8385efbb92a39b3c07 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 27 Aug 2018 15:57:48 +0530 Subject: [PATCH] mailbox: Introduce K3 Secure Proxy Driver Secure Proxy module manages hardware threads that are meant for communication between the processor entities. Adding support for this driver. Reviewed-by: Tom Rini Signed-off-by: Lokesh Vutla Signed-off-by: Andreas Dannenberg --- .../mailbox/k3-secure-proxy.txt | 40 ++ drivers/mailbox/Kconfig | 10 + drivers/mailbox/Makefile | 1 + drivers/mailbox/k3-sec-proxy.c | 438 ++++++++++++++++++ include/linux/soc/ti/k3-sec-proxy.h | 25 + 5 files changed, 514 insertions(+) create mode 100644 doc/device-tree-bindings/mailbox/k3-secure-proxy.txt create mode 100644 drivers/mailbox/k3-sec-proxy.c create mode 100644 include/linux/soc/ti/k3-sec-proxy.h diff --git a/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt b/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt new file mode 100644 index 0000000000..f3add0d4e7 --- /dev/null +++ b/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt @@ -0,0 +1,40 @@ +Texas Instruments' K3 Secure Proxy +=================================== + +The Texas Instruments' K3 Secure Proxy is a mailbox controller that has +configurable threads maintained by System power processor. Each thread +has different address space that can be used to send or receive messages. + +Secure Proxy Device Node: +=========================== +Required properties: +-------------------- +- compatible: Shall be: "ti,am654-secure-proxy" +- reg-names data - Map the data region + scfg - Map the secure configuration region + rt - Map the Realtime region. +- reg: Contains the register map per reg-names. +- #mbox-cells Shall be 1. Contains the thread ID. + +Example: +-------- + +secproxy: secproxy@285b0000 { + compatible = "ti,am654-secure-proxy"; + reg = <0x2a380000 0x80000>, + <0x2a400000 0x80000>, + <0x2a480000 0x80000>; + reg-names = "rt", "scfg", "data"; + #mbox-cells = <1>; +}; + +client: + +systemcontroller: systemcontroller { + [...] + # RX thread ID is 4. + # TX thread ID is 5. + mboxes= <&secproxy 4>, + <&secproxy 5>; + [...] +}; diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig index 9649b70589..2836ee4a7b 100644 --- a/drivers/mailbox/Kconfig +++ b/drivers/mailbox/Kconfig @@ -24,4 +24,14 @@ config TEGRA_HSP This enables support for the NVIDIA Tegra HSP Hw module, which implements doorbells, mailboxes, semaphores, and shared interrupts. +config K3_SEC_PROXY + bool "Texas Instruments K3 Secure Proxy Driver" + depends on DM_MAILBOX && ARCH_K3 + help + An implementation of Secure proxy slave driver for K3 SoCs from + Texas Instruments. Secure proxy is a communication entity mainly + used for communication between multiple processors with the SoC. + Select this driver if your platform has support for this hardware + block. + endmenu diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile index 155dbeb099..4ac85d412f 100644 --- a/drivers/mailbox/Makefile +++ b/drivers/mailbox/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_DM_MAILBOX) += mailbox-uclass.o obj-$(CONFIG_SANDBOX_MBOX) += sandbox-mbox.o obj-$(CONFIG_SANDBOX_MBOX) += sandbox-mbox-test.o obj-$(CONFIG_TEGRA_HSP) += tegra-hsp.o +obj-$(CONFIG_K3_SEC_PROXY) += k3-sec-proxy.o diff --git a/drivers/mailbox/k3-sec-proxy.c b/drivers/mailbox/k3-sec-proxy.c new file mode 100644 index 0000000000..b07b56cf97 --- /dev/null +++ b/drivers/mailbox/k3-sec-proxy.c @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Texas Instruments' K3 Secure proxy Driver + * + * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla + */ + +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* SEC PROXY RT THREAD STATUS */ +#define RT_THREAD_STATUS 0x0 +#define RT_THREAD_THRESHOLD 0x4 +#define RT_THREAD_STATUS_ERROR_SHIFT 31 +#define RT_THREAD_STATUS_ERROR_MASK BIT(31) +#define RT_THREAD_STATUS_CUR_CNT_SHIFT 0 +#define RT_THREAD_STATUS_CUR_CNT_MASK GENMASK(7, 0) + +/* SEC PROXY SCFG THREAD CTRL */ +#define SCFG_THREAD_CTRL 0x1000 +#define SCFG_THREAD_CTRL_DIR_SHIFT 31 +#define SCFG_THREAD_CTRL_DIR_MASK BIT(31) + +#define SEC_PROXY_THREAD(base, x) ((base) + (0x1000 * (x))) +#define THREAD_IS_RX 1 +#define THREAD_IS_TX 0 + +/** + * struct k3_sec_proxy_desc - Description of secure proxy integration. + * @thread_count: Number of Threads. + * @max_msg_size: Message size in bytes. + * @data_start_offset: Offset of the First data register of the thread + * @data_end_offset: Offset of the Last data register of the thread + * @valid_threads: List of Valid threads that the processor can access + * @num_valid_threads: Number of valid threads. + */ +struct k3_sec_proxy_desc { + u16 thread_count; + u16 max_msg_size; + u16 data_start_offset; + u16 data_end_offset; + const u32 *valid_threads; + u32 num_valid_threads; +}; + +/** + * struct k3_sec_proxy_thread - Description of a secure proxy Thread + * @id: Thread ID + * @data: Thread Data path region for target + * @scfg: Secure Config Region for Thread + * @rt: RealTime Region for Thread + * @rx_buf: Receive buffer data, max message size. + */ +struct k3_sec_proxy_thread { + u32 id; + void __iomem *data; + void __iomem *scfg; + void __iomem *rt; + u32 *rx_buf; +}; + +/** + * struct k3_sec_proxy_mbox - Description of a Secure Proxy Instance + * @chan: Mailbox Channel + * @desc: Description of the SoC integration + * @chans: Array for valid thread instances + * @target_data: Secure Proxy region for Target Data + * @scfg: Secure Proxy Region for Secure configuration. + * @rt: Secure proxy Region for Real Time Region. + */ +struct k3_sec_proxy_mbox { + struct mbox_chan chan; + struct k3_sec_proxy_desc *desc; + struct k3_sec_proxy_thread *chans; + phys_addr_t target_data; + phys_addr_t scfg; + phys_addr_t rt; +}; + +static inline u32 sp_readl(void __iomem *addr, unsigned int offset) +{ + return readl(addr + offset); +} + +static inline void sp_writel(void __iomem *addr, unsigned int offset, u32 data) +{ + writel(data, addr + offset); +} + +/** + * k3_sec_proxy_of_xlate() - Translation of phandle to channel + * @chan: Mailbox channel + * @args: Phandle Pointer + * + * Translates the phandle args and fills up the Mailbox channel from client. + * Return: 0 if all goes good, else return corresponding error message. + */ +static int k3_sec_proxy_of_xlate(struct mbox_chan *chan, + struct ofnode_phandle_args *args) +{ + struct k3_sec_proxy_mbox *spm = dev_get_priv(chan->dev); + int ind, i; + + debug("%s(chan=%p)\n", __func__, chan); + + if (args->args_count != 1) { + debug("Invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + ind = args->args[0]; + + for (i = 0; i < spm->desc->num_valid_threads; i++) + if (spm->chans[i].id == ind) { + chan->id = ind; + chan->con_priv = &spm->chans[i]; + return 0; + } + + dev_err(chan->dev, "%s: Invalid Thread ID %d\n", __func__, ind); + return -ENOENT; +} + +/** + * k3_sec_proxy_request() - Request for mailbox channel + * @chan: Channel Pointer + */ +static int k3_sec_proxy_request(struct mbox_chan *chan) +{ + debug("%s(chan=%p)\n", __func__, chan); + + return 0; +} + +/** + * k3_sec_proxy_free() - Free the mailbox channel + * @chan: Channel Pointer + */ +static int k3_sec_proxy_free(struct mbox_chan *chan) +{ + debug("%s(chan=%p)\n", __func__, chan); + + return 0; +} + +/** + * k3_sec_proxy_verify_thread() - Verify thread status before + * sending/receiving data. + * @spt: pointer to secure proxy thread description + * @dir: Direction of the thread + * + * Return: 0 if all goes good, else appropriate error message. + */ +static inline int k3_sec_proxy_verify_thread(struct k3_sec_proxy_thread *spt, + u8 dir) +{ + /* Check for any errors already available */ + if (sp_readl(spt->rt, RT_THREAD_STATUS) & + RT_THREAD_STATUS_ERROR_MASK) { + printf("%s: Thread %d is corrupted, cannot send data.\n", + __func__, spt->id); + return -EINVAL; + } + + /* Make sure thread is configured for right direction */ + if ((sp_readl(spt->scfg, SCFG_THREAD_CTRL) + & SCFG_THREAD_CTRL_DIR_MASK) >> SCFG_THREAD_CTRL_DIR_SHIFT != dir) { + if (dir) + printf("%s: Trying to receive data on tx Thread %d\n", + __func__, spt->id); + else + printf("%s: Trying to send data on rx Thread %d\n", + __func__, spt->id); + return -EINVAL; + } + + /* Check the message queue before sending/receiving data */ + if (!(sp_readl(spt->rt, RT_THREAD_STATUS) & + RT_THREAD_STATUS_CUR_CNT_MASK)) + return -ENODATA; + + return 0; +} + +/** + * k3_sec_proxy_send() - Send data via mailbox channel + * @chan: Channel Pointer + * @data: Pointer to k3_sec_proxy_msg + * + * Return: 0 if all goes good, else appropriate error message. + */ +static int k3_sec_proxy_send(struct mbox_chan *chan, const void *data) +{ + const struct k3_sec_proxy_msg *msg = (struct k3_sec_proxy_msg *)data; + struct k3_sec_proxy_mbox *spm = dev_get_priv(chan->dev); + struct k3_sec_proxy_thread *spt = chan->con_priv; + int num_words, trail_bytes, ret; + void __iomem *data_reg; + u32 *word_data; + + debug("%s(chan=%p, data=%p)\n", __func__, chan, data); + + ret = k3_sec_proxy_verify_thread(spt, THREAD_IS_TX); + if (ret) { + dev_err(dev, "%s: Thread%d verification failed. ret = %d\n", + __func__, spt->id, ret); + return ret; + } + + /* Check the message size. */ + if (msg->len > spm->desc->max_msg_size) { + printf("%s: Thread %ld message length %zu > max msg size %d\n", + __func__, chan->id, msg->len, spm->desc->max_msg_size); + return -EINVAL; + } + + /* Send the message */ + data_reg = spt->data + spm->desc->data_start_offset; + for (num_words = msg->len / sizeof(u32), word_data = (u32 *)msg->buf; + num_words; + num_words--, data_reg += sizeof(u32), word_data++) + writel(*word_data, data_reg); + + trail_bytes = msg->len % sizeof(u32); + if (trail_bytes) { + u32 data_trail = *word_data; + + /* Ensure all unused data is 0 */ + data_trail &= 0xFFFFFFFF >> (8 * (sizeof(u32) - trail_bytes)); + writel(data_trail, data_reg); + data_reg++; + } + + /* + * 'data_reg' indicates next register to write. If we did not already + * write on tx complete reg(last reg), we must do so for transmit + */ + if (data_reg <= (spt->data + spm->desc->data_end_offset)) + sp_writel(spt->data, spm->desc->data_end_offset, 0); + + debug("%s: Message successfully sent on thread %ld\n", + __func__, chan->id); + + return 0; +} + +/** + * k3_sec_proxy_recv() - Receive data via mailbox channel + * @chan: Channel Pointer + * @data: Pointer to k3_sec_proxy_msg + * + * Return: 0 if all goes good, else appropriate error message. + */ +static int k3_sec_proxy_recv(struct mbox_chan *chan, void *data) +{ + struct k3_sec_proxy_mbox *spm = dev_get_priv(chan->dev); + struct k3_sec_proxy_thread *spt = chan->con_priv; + struct k3_sec_proxy_msg *msg = data; + void __iomem *data_reg; + int num_words, ret; + u32 *word_data; + + debug("%s(chan=%p, data=%p)\n", __func__, chan, data); + + ret = k3_sec_proxy_verify_thread(spt, THREAD_IS_RX); + if (ret) + return ret; + + msg->len = spm->desc->max_msg_size; + msg->buf = spt->rx_buf; + data_reg = spt->data + spm->desc->data_start_offset; + word_data = spt->rx_buf; + for (num_words = spm->desc->max_msg_size / sizeof(u32); + num_words; + num_words--, data_reg += sizeof(u32), word_data++) + *word_data = readl(data_reg); + + debug("%s: Message successfully received from thread %ld\n", + __func__, chan->id); + + return 0; +} + +struct mbox_ops k3_sec_proxy_mbox_ops = { + .of_xlate = k3_sec_proxy_of_xlate, + .request = k3_sec_proxy_request, + .free = k3_sec_proxy_free, + .send = k3_sec_proxy_send, + .recv = k3_sec_proxy_recv, +}; + +/** + * k3_sec_proxy_of_to_priv() - generate private data from device tree + * @dev: corresponding k3 secure proxy device + * @spm: pointer to driver specific private data + * + * Return: 0 if all went ok, else corresponding error message. + */ +static int k3_sec_proxy_of_to_priv(struct udevice *dev, + struct k3_sec_proxy_mbox *spm) +{ + const void *blob = gd->fdt_blob; + + if (!blob) { + debug("'%s' no dt?\n", dev->name); + return -ENODEV; + } + + spm->target_data = devfdt_get_addr_name(dev, "target_data"); + if (spm->target_data == FDT_ADDR_T_NONE) { + dev_err(dev, "No reg property for target data base\n"); + return -EINVAL; + } + + spm->scfg = devfdt_get_addr_name(dev, "scfg"); + if (spm->rt == FDT_ADDR_T_NONE) { + dev_err(dev, "No reg property for Secure Cfg base\n"); + return -EINVAL; + } + + spm->rt = devfdt_get_addr_name(dev, "rt"); + if (spm->rt == FDT_ADDR_T_NONE) { + dev_err(dev, "No reg property for Real Time Cfg base\n"); + return -EINVAL; + } + + return 0; +} + +/** + * k3_sec_proxy_thread_setup - Initialize the parameters for all valid threads + * @spm: Mailbox instance for which threads needs to be initialized + * + * Return: 0 if all went ok, else corresponding error message + */ +static int k3_sec_proxy_thread_setup(struct k3_sec_proxy_mbox *spm) +{ + struct k3_sec_proxy_thread *spt; + int i, ind; + + for (i = 0; i < spm->desc->num_valid_threads; i++) { + spt = &spm->chans[i]; + ind = spm->desc->valid_threads[i]; + spt->id = ind; + spt->data = (void *)SEC_PROXY_THREAD(spm->target_data, ind); + spt->scfg = (void *)SEC_PROXY_THREAD(spm->scfg, ind); + spt->rt = (void *)SEC_PROXY_THREAD(spm->rt, ind); + spt->rx_buf = calloc(1, spm->desc->max_msg_size); + if (!spt->rx_buf) + return -ENOMEM; + } + + return 0; +} + +/** + * k3_sec_proxy_probe() - Basic probe + * @dev: corresponding mailbox device + * + * Return: 0 if all went ok, else corresponding error message + */ +static int k3_sec_proxy_probe(struct udevice *dev) +{ + struct k3_sec_proxy_mbox *spm = dev_get_priv(dev); + int ret; + + debug("%s(dev=%p)\n", __func__, dev); + + ret = k3_sec_proxy_of_to_priv(dev, spm); + if (ret) + return ret; + + spm->desc = (void *)dev_get_driver_data(dev); + spm->chans = calloc(spm->desc->num_valid_threads, + sizeof(struct k3_sec_proxy_thread)); + if (!spm->chans) + return -ENOMEM; + + ret = k3_sec_proxy_thread_setup(spm); + if (ret) { + debug("%s: secure proxy thread setup failed\n", __func__); + return ret; + } + + return 0; +} + +static int k3_sec_proxy_remove(struct udevice *dev) +{ + struct k3_sec_proxy_mbox *spm = dev_get_priv(dev); + + debug("%s(dev=%p)\n", __func__, dev); + + free(spm->chans); + + return 0; +} + +/* + * Thread ID #4: ROM request + * Thread ID #5: ROM response, SYSFW notify + * Thread ID #6: SYSFW request response + * Thread ID #7: SYSFW request high priority + * Thread ID #8: SYSFW request low priority + * Thread ID #9: SYSFW notify response + */ +static const u32 am6x_valid_threads[] = { 4, 5, 6, 7, 8, 9, 11, 13 }; + +static const struct k3_sec_proxy_desc am654_desc = { + .thread_count = 90, + .max_msg_size = 60, + .data_start_offset = 0x4, + .data_end_offset = 0x3C, + .valid_threads = am6x_valid_threads, + .num_valid_threads = ARRAY_SIZE(am6x_valid_threads), +}; + +static const struct udevice_id k3_sec_proxy_ids[] = { + { .compatible = "ti,am654-secure-proxy", .data = (ulong)&am654_desc}, + { } +}; + +U_BOOT_DRIVER(k3_sec_proxy) = { + .name = "k3-secure-proxy", + .id = UCLASS_MAILBOX, + .of_match = k3_sec_proxy_ids, + .probe = k3_sec_proxy_probe, + .remove = k3_sec_proxy_remove, + .priv_auto_alloc_size = sizeof(struct k3_sec_proxy_mbox), + .ops = &k3_sec_proxy_mbox_ops, +}; diff --git a/include/linux/soc/ti/k3-sec-proxy.h b/include/linux/soc/ti/k3-sec-proxy.h new file mode 100644 index 0000000000..f34854ceeb --- /dev/null +++ b/include/linux/soc/ti/k3-sec-proxy.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Texas Instruments' K3 Secure proxy + * + * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla + * + */ + +#ifndef K3_SEC_PROXY_H +#define K3_SEC_PROXY_H + +/** + * struct k3_sec_proxy_msg - Secure proxy message structure + * @len: Length of data in the Buffer + * @buf: Buffer pointer + * + * This is the structure for data used in mbox_send() and mbox_recv(). + */ +struct k3_sec_proxy_msg { + size_t len; + u32 *buf; +}; + +#endif /* K3_SEC_PROXY_H */ -- 2.25.1