From f70444980b23f5f52025aa6b7d22233312dea136 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 13 Dec 2014 12:40:45 +0100 Subject: [PATCH] sunxi: axp221: Add Kconfig help and sane defaults for typical ldo usage Some of the ldo-s of the axp221 are used in the same way on most boards, add comments to the Kconfig help text to reflect this, and give them defaults matching their typical usage. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- configs/CSQ_CS908_defconfig | 3 --- configs/Colombus_defconfig | 3 --- configs/Hummingbird_A31_defconfig | 4 ---- configs/Mele_M9_defconfig | 3 --- drivers/power/Kconfig | 20 ++++++++++++++------ 5 files changed, 14 insertions(+), 19 deletions(-) diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index 4c9cff6e92..1b6cdbf811 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -11,9 +11,6 @@ CONFIG_FDTFILE="sun6i-a31s-cs908.dtb" +S:CONFIG_AXP221_DLDO1_VOLT=3300 # Wifi power +S:CONFIG_AXP221_ALDO1_VOLT=3300 -# HDMI power ? -+S:CONFIG_AXP221_ALDO2_VOLT=1800 -+S:CONFIG_AXP221_ALDO3_VOLT=3000 # No Vbus gpio for either usb +S:CONFIG_USB1_VBUS_PIN="" +S:CONFIG_USB2_VBUS_PIN="" diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index b8c5400267..f42ae5222e 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -9,8 +9,5 @@ CONFIG_FDTFILE="sun6i-a31-colombus.dtb" +S:CONFIG_DRAM_ZQ=251 # Wifi power +S:CONFIG_AXP221_ALDO1_VOLT=3300 -# HDMI power ? -+S:CONFIG_AXP221_ALDO2_VOLT=1800 -+S:CONFIG_AXP221_ALDO3_VOLT=3000 # No Vbus gpio for usb1 +S:CONFIG_USB1_VBUS_PIN="" diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index b60d579e4b..93820ab966 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -9,10 +9,6 @@ CONFIG_FDTFILE="sun6i-a31-hummingbird.dtb" +S:CONFIG_DRAM_ZQ=251 # Wifi power +S:CONFIG_AXP221_ALDO1_VOLT=3300 -# PM-CPUS GPIO power -+S:CONFIG_AXP221_ALDO2_VOLT=1800 -# SoC IR, PLL and Analog power (must be 3.0V) -+S:CONFIG_AXP221_ALDO3_VOLT=3000 # Vbus gpio for usb1 +S:CONFIG_USB1_VBUS_PIN="PH24" # No Vbus gpio for usb2 diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index a598254b2d..445cc574d8 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -13,9 +13,6 @@ CONFIG_FDTFILE="sun6i-a31-m9.dtb" +S:CONFIG_AXP221_DLDO4_VOLT=3300 # Wifi power +S:CONFIG_AXP221_ALDO1_VOLT=3300 -# HDMI power ? -+S:CONFIG_AXP221_ALDO2_VOLT=1800 -+S:CONFIG_AXP221_ALDO3_VOLT=3000 # Vbus gpio for usb1 +S:CONFIG_USB1_VBUS_PIN="PC27" # No Vbus gpio for usb2 diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 7373a793e2..af66887129 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -12,7 +12,9 @@ config AXP221_DLDO1_VOLT default -1 ---help--- Set the voltage (mV) to program the axp221 dldo1 at, set to -1 to - disable dldo1. + disable dldo1. On sun6i (A31) boards with ethernet this is often used + to power the ethernet phy. On sun8i (A23) boards this is often used to + power the wifi. config AXP221_DLDO4_VOLT int "axp221 dldo4 voltage" @@ -28,20 +30,26 @@ config AXP221_ALDO1_VOLT default -1 ---help--- Set the voltage (mV) to program the axp221 aldo1 at, set to -1 to - disable aldo1. + disable aldo1. On sun6i (A31) boards which have a wifi module this is + often used to power the wifi module. config AXP221_ALDO2_VOLT int "axp221 aldo2 voltage" depends on AXP221_POWER - default -1 + default 1800 if MACH_SUN6I + default 2500 if MACH_SUN8I ---help--- Set the voltage (mV) to program the axp221 aldo2 at, set to -1 to - disable aldo2. + disable aldo2. On sun6i (A31) boards this is typically connected to + VCC-PM, which powers the port M gpios, and should be set to 1.8V. + On sun8i (A23) this is typically connected to VDD-DLL and must be + set to 2.5V. config AXP221_ALDO3_VOLT int "axp221 aldo3 voltage" depends on AXP221_POWER - default -1 + default 3000 ---help--- Set the voltage (mV) to program the axp221 aldo3 at, set to -1 to - disable aldo3. + disable aldo3. This is typically connected to VCC-PLL and AVCC and + must be set to 3V. -- 2.25.1