From f5bf23d8278b2fdfb9ce41fa36369cebc882ab02 Mon Sep 17 00:00:00 2001 From: Santan Kumar Date: Fri, 28 Apr 2017 12:47:24 +0530 Subject: [PATCH] armv8: ls2080ardb, ls2080aqds: Adjust memory map for NOR-boot This patch adjusts memory map for images on LS2080ARDB and LS2080AQDS NOR flash as below Image Flash Offset RCW+PBI 0x00000000 Boot firmware (U-Boot) 0x00100000 Boot firmware Environment 0x00300000 PPA firmware 0x00400000 PHY firmware 0x00980000 DPAA2 MC 0x00A00000 DPAA2 DPL 0x00D00000 DPAA2 DPC 0x00E00000 Kernel.itb 0x01000000 Signed-off-by: Santan Kumar Signed-off-by: Priyanka Jain Reviewed-by: York Sun --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 2 +- board/freescale/ls2080aqds/README | 12 ++++++++++++ board/freescale/ls2080ardb/README | 13 +++++++++++++ include/configs/ls2080a_common.h | 8 ++++---- include/configs/ls2080aqds.h | 8 ++++---- include/configs/ls2080ardb.h | 12 ++++++------ 6 files changed, 40 insertions(+), 15 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index c8ba2d63ea..fa386c6896 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -165,7 +165,7 @@ config SYS_LS_PPA_FW_ADDR depends on FSL_LS_PPA default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A + default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A default 0x60400000 if SYS_LS_PPA_FW_IN_XIP default 0x400000 if SYS_LS_PPA_FW_IN_MMC default 0x400000 if SYS_LS_PPA_FW_IN_NAND diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README index 2808bd5851..fd0e25a686 100644 --- a/board/freescale/ls2080aqds/README +++ b/board/freescale/ls2080aqds/README @@ -89,6 +89,18 @@ c) NAND boot d) SD boot e) QSPI boot +Memory map for NOR boot +------------------------- +Image Flash Offset +RCW+PBI 0x00000000 +Boot firmware (U-Boot) 0x00100000 +Boot firmware Environment 0x00300000 +PPA firmware 0x00400000 +DPAA2 MC 0x00A00000 +DPAA2 DPL 0x00D00000 +DPAA2 DPC 0x00E00000 +Kernel.itb 0x01000000 + Environment Variables --------------------- - mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README index fde143d2f4..f228d80549 100644 --- a/board/freescale/ls2080ardb/README +++ b/board/freescale/ls2080ardb/README @@ -85,6 +85,19 @@ a) NOR boot b) NAND boot c) QSPI boot +Memory map for NOR boot +------------------------- +Image Flash Offset +RCW+PBI 0x00000000 +Boot firmware (U-Boot) 0x00100000 +Boot firmware Environment 0x00300000 +PPA firmware 0x00400000 +Cortina PHY firmware 0x00980000 +DPAA2 MC 0x00A00000 +DPAA2 DPL 0x00D00000 +DPAA2 DPC 0x00E00000 +Kernel.itb 0x01000000 + cfg_rcw_src switches needs to be changed for booting from different option. Refer to board documentation for correct switch setting. diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 363bfd4e95..7b73139879 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -193,18 +193,18 @@ unsigned long long get_qixis_addr(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581200000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "console=ttyAMA0,38400n8\0" \ - "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0500 " \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=256" -#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \ +#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ " cp.b $kernel_start $kernel_load" \ " $kernel_size && bootm $kernel_load" diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 469ef9e0a4..4788c15d32 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -265,7 +265,7 @@ unsigned long get_board_ddr_clk(void); #ifndef CONFIG_QSPI_BOOT #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif @@ -376,12 +376,12 @@ unsigned long get_board_ddr_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ - "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" #endif /* CONFIG_SECURE_BOOT */ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 3774b177fc..0e920f6374 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -251,7 +251,7 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif @@ -421,13 +421,13 @@ unsigned long get_board_sys_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ "fdtfile=fsl-ls2080a-rdb.dtb\0" \ - "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" \ + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" \ BOOTENV #endif #endif @@ -447,7 +447,7 @@ unsigned long get_board_sys_clk(void); " || run distro_bootcmd" #else /* Try to boot an on-NOR kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \ +#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \ " && cp.b $kernel_start $kernel_load $kernel_size" \ " && bootm $kernel_load" \ " || run distro_bootcmd" @@ -463,7 +463,7 @@ unsigned long get_board_sys_clk(void); #ifdef CONFIG_QSPI_BOOT #define CONFIG_CORTINA_FW_ADDR 0x20980000 #else -#define CONFIG_CORTINA_FW_ADDR 0x581000000 +#define CONFIG_CORTINA_FW_ADDR 0x580980000 #endif #define CONFIG_CORTINA_FW_LENGTH 0x40000 -- 2.25.1