From f472d78868cbc8d8e218a7f66c50f1c8988ba43d Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 3 May 2007 16:42:37 +0000 Subject: [PATCH] nuke ar7-2.4 (old code, dsl driver no longer compiles, replaced by ar7-2.6) SVN-Revision: 7087 --- target/linux/ar7-2.4/Makefile | 26 - target/linux/ar7-2.4/base-files.mk | 11 - .../base-files/default/etc/init.d/adam2 | 13 - .../base-files/default/etc/preinit.arch | 5 - target/linux/ar7-2.4/config/default | 52 - target/linux/ar7-2.4/image/Makefile | 102 - target/linux/ar7-2.4/image/sercomm/adam2.bin | Bin 131072 -> 0 bytes target/linux/ar7-2.4/image/sercomm/dg834 | Bin 80 -> 0 bytes target/linux/ar7-2.4/image/sercomm/jdr454wb | Bin 80 -> 0 bytes target/linux/ar7-2.4/image/src/LzmaDecode.c | 663 -- target/linux/ar7-2.4/image/src/LzmaDecode.h | 100 - target/linux/ar7-2.4/image/src/gzip.h | 51 - target/linux/ar7-2.4/image/src/ld.script.in | 34 - target/linux/ar7-2.4/image/src/loader.c | 140 - target/linux/ar7-2.4/image/src/srec2bin.c | 523 - .../linux/ar7-2.4/image/src/zimage.script.in | 11 - .../ar7-2.4/patches/000-ar7_support.patch | 9549 ----------------- .../linux/ar7-2.4/patches/001-flash_map.patch | 307 - .../ar7-2.4/patches/002-led_driver.patch | 1915 ---- .../ar7-2.4/patches/004-atm_driver.patch | 60 - .../ar7-2.4/patches/005-wdt_driver.patch | 392 - target/linux/ar7-2.4/profiles/AnnexA.mk | 13 - target/linux/ar7-2.4/profiles/AnnexB.mk | 13 - target/linux/ar7-2.4/profiles/None.mk | 13 - target/linux/ar7-2.4/src/adam2patcher.c | 59 - 25 files changed, 14052 deletions(-) delete mode 100644 target/linux/ar7-2.4/Makefile delete mode 100644 target/linux/ar7-2.4/base-files.mk delete mode 100755 target/linux/ar7-2.4/base-files/default/etc/init.d/adam2 delete mode 100755 target/linux/ar7-2.4/base-files/default/etc/preinit.arch delete mode 100644 target/linux/ar7-2.4/config/default delete mode 100644 target/linux/ar7-2.4/image/Makefile delete mode 100644 target/linux/ar7-2.4/image/sercomm/adam2.bin delete mode 100644 target/linux/ar7-2.4/image/sercomm/dg834 delete mode 100644 target/linux/ar7-2.4/image/sercomm/jdr454wb delete mode 100644 target/linux/ar7-2.4/image/src/LzmaDecode.c delete mode 100644 target/linux/ar7-2.4/image/src/LzmaDecode.h delete mode 100644 target/linux/ar7-2.4/image/src/gzip.h delete mode 100644 target/linux/ar7-2.4/image/src/ld.script.in delete mode 100644 target/linux/ar7-2.4/image/src/loader.c delete mode 100644 target/linux/ar7-2.4/image/src/srec2bin.c delete mode 100644 target/linux/ar7-2.4/image/src/zimage.script.in delete mode 100644 target/linux/ar7-2.4/patches/000-ar7_support.patch delete mode 100644 target/linux/ar7-2.4/patches/001-flash_map.patch delete mode 100644 target/linux/ar7-2.4/patches/002-led_driver.patch delete mode 100644 target/linux/ar7-2.4/patches/004-atm_driver.patch delete mode 100644 target/linux/ar7-2.4/patches/005-wdt_driver.patch delete mode 100644 target/linux/ar7-2.4/profiles/AnnexA.mk delete mode 100644 target/linux/ar7-2.4/profiles/AnnexB.mk delete mode 100644 target/linux/ar7-2.4/profiles/None.mk delete mode 100644 target/linux/ar7-2.4/src/adam2patcher.c diff --git a/target/linux/ar7-2.4/Makefile b/target/linux/ar7-2.4/Makefile deleted file mode 100644 index 6f70532774..0000000000 --- a/target/linux/ar7-2.4/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mipsel -BOARD:=ar7 -BOARDNAME:=TI AR7 -FEATURES:=squashfs jffs2 broken - -define Target/Description - Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2) -endef - -KERNEL:=2.4 - -include $(INCLUDE_DIR)/kernel-build.mk -DEFAULT_PACKAGES += kmod-avalanche-cpmac - -# include the profiles --include profiles/*.mk - -$(eval $(call BuildKernel)) diff --git a/target/linux/ar7-2.4/base-files.mk b/target/linux/ar7-2.4/base-files.mk deleted file mode 100644 index f21a604b83..0000000000 --- a/target/linux/ar7-2.4/base-files.mk +++ /dev/null @@ -1,11 +0,0 @@ -define Build/Compile - $(call Build/Compile/Default) - $(TARGET_CC) -o $(PKG_BUILD_DIR)/adam2patcher $(PLATFORM_DIR)/src/adam2patcher.c -endef - -define Package/base-files/install-target - mkdir -p $(1)/sbin - $(CP) $(PKG_BUILD_DIR)/adam2patcher $(1)/sbin -endef - - diff --git a/target/linux/ar7-2.4/base-files/default/etc/init.d/adam2 b/target/linux/ar7-2.4/base-files/default/etc/init.d/adam2 deleted file mode 100755 index 425bc15d69..0000000000 --- a/target/linux/ar7-2.4/base-files/default/etc/init.d/adam2 +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh /etc/rc.common -# ADAM2 patcher for Netgear DG834 and compatible -# Copyright (C) 2006 OpenWrt.org - -START=00 -start() { - MD5="$(md5sum /dev/mtdblock/0 | awk '{print $1}')" - [ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && { - mtd unlock adam2 - /sbin/adam2patcher /dev/mtdblock/0 - } - rm -f /etc/init.d/S00adam2 /sbin/adam2patcher >&- 2>&- -} diff --git a/target/linux/ar7-2.4/base-files/default/etc/preinit.arch b/target/linux/ar7-2.4/base-files/default/etc/preinit.arch deleted file mode 100755 index 965a1af611..0000000000 --- a/target/linux/ar7-2.4/base-files/default/etc/preinit.arch +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh -[ -z "$FAILSAFE" ] || { - echo /bin/true > /proc/sys/kernel/hotplug - telnetd -l /bin/login <> /dev/null 2>&1 -} diff --git a/target/linux/ar7-2.4/config/default b/target/linux/ar7-2.4/config/default deleted file mode 100644 index 3f65eb5362..0000000000 --- a/target/linux/ar7-2.4/config/default +++ /dev/null @@ -1,52 +0,0 @@ -CONFIG_AR7=y -# CONFIG_AR7DB is not set -# CONFIG_AR7RD is not set -CONFIG_AR7WRD=y -CONFIG_AR7_ADAM2=y -CONFIG_AR7_CPU=150 -CONFIG_AR7_LED=y -CONFIG_AR7_MEMORY=0x14000000 -CONFIG_AR7_SYS=125 -CONFIG_AR7_VLYNQ=y -CONFIG_AR7_VLYNQ_PORTS=2 -CONFIG_AR7_WDT=y -CONFIG_ATM=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -# CONFIG_ATM_CLIP is not set -# CONFIG_ATM_LANE is not set -# CONFIG_ATM_TCP is not set -# CONFIG_BLUEZ is not set -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CRC32 is not set -# CONFIG_FILTER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IDE is not set -CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048 -# CONFIG_IP_VS is not set -CONFIG_IRQ_CPU=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_KGDB is not set -CONFIG_LOG_BUF_SHIFT=0 -# CONFIG_MINIX_FS is not set -# CONFIG_MSDOS_FS is not set -CONFIG_MTD_AR7=y -CONFIG_MTD_AR7_BUSWIDTH=2 -CONFIG_MTD_AR7_DEFAULTS=y -CONFIG_MTD_AR7_LEN=0x400000 -CONFIG_MTD_AR7_START=0x10000000 -# CONFIG_MTD_CFI_SSTSTD is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_SCH_ATM is not set -# CONFIG_NET_WIRELESS is not set -# CONFIG_PARPORT is not set -# CONFIG_PCI is not set -# CONFIG_PCMCIA is not set -CONFIG_PPPOATM=m -CONFIG_SOFT_WATCHDOG=m -# CONFIG_SOUND is not set -CONFIG_SWAP_IO_SPACE=y -# CONFIG_USB is not set -# CONFIG_VIDEO_DEV is not set -CONFIG_VLYNQ_CLK_LOCAL=y diff --git a/target/linux/ar7-2.4/image/Makefile b/target/linux/ar7-2.4/image/Makefile deleted file mode 100644 index e10d1aa5c1..0000000000 --- a/target/linux/ar7-2.4/image/Makefile +++ /dev/null @@ -1,102 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -PKG_BUILD_DIR:=$(BUILD_DIR)/ar7loader - -LOADADDR := 0x94020000 -OUTPUT_FORMAT := elf32-tradlittlemips - -CFLAGS := -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ - -pipe -mlong-calls -fno-common \ - -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap \ - -DLOADADDR=$(LOADADDR) - -$(PKG_BUILD_DIR)/cksum.o: $(PKG_BUILD_DIR)/cksum.c - $(HOSTCC) -o $@ $< - -$(PKG_BUILD_DIR)/ckmain.o: $(PKG_BUILD_DIR)/ckmain.c - $(HOSTCC) -o $@ $< - -$(PKG_BUILD_DIR)/tichksum: $(PKG_BUILD_DIR)/ckmain.o $(PKG_BUILD_DIR)/cksum.o - $(HOSTCC) -o $@ $< - -$(PKG_BUILD_DIR)/LzmaDecode.o: src/LzmaDecode.c - $(TARGET_CC) $(CFLAGS) -c -o $@ $< - -$(PKG_BUILD_DIR)/loader.o: src/loader.c - $(TARGET_CC) $(CFLAGS) -c -o $@ $< - -$(STAGING_DIR)/bin/srec2bin: src/srec2bin.c - $(HOSTCC) -o $@ $< - - -define Build/Compile - mkdir -p $(PKG_BUILD_DIR) - sed -e 's/@@OUTPUT_FORMAT@@/$(OUTPUT_FORMAT)/' \ - -e 's/@@LOADADDR@@/$(LOADADDR)/' \ - < src/zimage.script.in \ - > $(PKG_BUILD_DIR)/zimage.script - sed -e 's/@@OUTPUT_FORMAT@@/$(OUTPUT_FORMAT)/' \ - -e 's/@@LOADADDR@@/$(LOADADDR)/' \ - < src/ld.script.in \ - > $(PKG_BUILD_DIR)/ld.script - $(MAKE) $(PKG_BUILD_DIR)/loader.o $(PKG_BUILD_DIR)/LzmaDecode.o $(STAGING_DIR)/bin/srec2bin -endef - -define Build/Clean - rm -rf $(PKG_BUILD_DIR) -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - $(TARGET_CROSS)ld -T $(PKG_BUILD_DIR)/zimage.script -r -b binary $(KDIR)/vmlinux.lzma -o $(KDIR)/zimage.o - $(TARGET_CROSS)ld -static -G 0 --defsym kernel_entry=0x$${shell $(TARGET_CROSS)nm $(KDIR)/linux-*/vmlinux | grep kernel_entry | cut -d' ' -f1} -T $(PKG_BUILD_DIR)/ld.script \ - $(PKG_BUILD_DIR)/loader.o \ - $(PKG_BUILD_DIR)/LzmaDecode.o \ - $(KDIR)/zimage.o \ - -o $(KDIR)/loader - $(TARGET_CROSS)objcopy -O srec $(KDIR)/loader $(KDIR)/ram_zimage.sre - $(STAGING_DIR)/bin/srec2bin $(KDIR)/ram_zimage.sre $(KDIR)/vmlinux.bin -endef - -define align/jffs2-64k -bs=65536 conv=sync -endef - -define align/jffs2-128k -bs=131072 conv=sync -endef - -define Image/Build/CyberTAN - (dd if=/dev/zero bs=16 count=1; cat $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin) | \ - $(STAGING_DIR)/bin/addpattern -p $(3) -o $(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(4).bin -endef - -define Image/Build/sErCoMm - cat sercomm/adam2.bin "$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin" > "$(KDIR)/dgfw.tmp" - dd if=sercomm/$(2) of="$(KDIR)/dgfw.tmp" bs=$$$$((0x3e0000 - 80)) seek=1 conv=notrunc - $(STAGING_DIR)/bin/dgfirmware -f -w "$(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(3).img" "$(KDIR)/dgfw.tmp" - rm -f "$(KDIR)/dgfw.tmp" -endef - -define Image/Build - dd if=$(KDIR)/vmlinux.bin $(call align/$(1)) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin - cat $(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)/root.$(1) >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin - $(call Image/Build/CyberTAN,$(1),AG1B,AG1B,$(1)) - $(call Image/Build/CyberTAN,$(1),WA21,WA21,$(1)) - $(call Image/Build/CyberTAN,$(1),WA22,WA22,$(1)) - $(call Image/Build/CyberTAN,$(1),WAG2,WAG2,$(1)) - $(call Image/Build/CyberTAN,$(1),WA31,WA31 -b,$(1)) - $(call Image/Build/CyberTAN,$(1),WA32,WA32 -b,$(1)) - $(call Image/Build/sErCoMm,$(1),dg834,$(1)) - $(call Image/Build/sErCoMm,$(1),jdr454wb,$(1)) -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/ar7-2.4/image/sercomm/adam2.bin b/target/linux/ar7-2.4/image/sercomm/adam2.bin deleted file mode 100644 index d4aa0cd2d38de53eeb55c527e37dc26fc3cfd2f9..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 131072 zcmeFa4|rTxdFTJmosl%Q75hq-9mO_et~8PrTZFMug11azGE%@zvs5vLx-?r9*-6|b z+ZvK?y={PtEIXo=EhX!wF28I$k?q7~70U?$++RbZbwV2YW4qoirP)oIx*-9!(5?AX z2w*b%`JQ{PG#c9p?61%Mp5ODVpGTfM=bk_BdH-dO(UmQLD=`MZM4#I z$x|&)%*hivqL%t)+LY7|JyBcUZdR`S{%X%D-SroF7tl-A&NzMWYUA^6(r>a!eO~DA&c^f0Gp|zrLVZ;E z7vzTQ=9D$_-u~*9c|94n&Fi!O{7R&^f?41`m?^#~9o1iw=t{~m)=>O#TrT~m{!~}x zze9OY(7esfJ3xB}xrzlnvlbN2P|qvQc9ipGrRj`aGo7{abhGtO`!+D$X4g))+uNtt z*gK|kws|^lKQrB9*G>1@&rTQY`sqIV=hK_)ozq48x#^M(P7l}()0=I}^!4_x=|S5% zz17}5z0KY;eWU&S^pI_v-eJEmz0=-1eVhH_^e($``VRXS)4T1Lrth@(O)q*m*5?Pa zz?1FDSZaT>rT6=m+23Xj``fK?{~BxBpNA)UZ1MhHTe81k&HMZ8lKq=(>HeZE+g~z& z|A4jZ-)yb>ueas<2d!=YR$H-uo2}e`qg}dx$lCYsu*>%Ev{n0Wv(@`|*_!=#*z5N1 zw%6~!(=Okib9@x>hj4UBlh9^!`09+mmyGpkXsndBY~I4Ll6XqIWu;8sw}yPM`%L<; zV!Hlq{7IdZt8<2R^=tfvjm2Qolh(QEB^o~c*elgPZ3_yYo9E99*8BYV^(=gBj;9y& zIeUKH7{33JisrQthW~KU`ag*43;t@goU?5sCEFajc>}!JW^ev^sG;P_;{QV1JH0Kn zciKt|%f~6-tn!@;%O@$nQRTZ9mLH^ii1OARvr(RXKF9bpTUf70ZL1`b`h(MPEA3r?fABeOI~SIL%W>Paune4zFSm+tI^M!3cpNudSO+|gTXta?cpNu> zVHtQFxAui);Bnk?3(LUcxb-Y71CQfYSXc%g$8B(78F(DG-3!aW;BRVHtQFw?hld;N5W>T3D9gdd?=zebk&ys!!IQ+m>Xzd|T9I=Iu8dfj@umv1Lvc zCLhaKHu!#Z(Ta?X=8}Hu*Hu+b9b8>3z415Knhnil?53Hl4bL>&_8H%H%(U6fGwpWE z%o@9OCTBZm^7hL!J@zkWdhPu)1-osg&;HfSCi|6{qW$Vj$#%^Q*av1d+XrW^x7%k1 z?T(qP_G>fS>|f8^Xum!)WV>f}*uR^j2g&yB3?)7ZnT3uIReN zmgJqDw%+~K>iYw;=7%!2D}rE8AogE^ZD#ATy*2OOA9QT)oqJ!f>{SK3g1_tdd;eAT+2-OV8^0=TzkPqk zK6Zbj{nq_WHg>;f`|p1Pa5PYsz<(iJ1)KK*-xct4_MulC?`FH44WaeU;bgPJ$+`I5 zg>Z5WI61HHU97A0;rfcl5bkYqF?6`DD;Rty>~#Gc4H|4w3-Z(T1Bd(Ty8aP-I9kb` zq5Xy08n%IGsCL~$`@z|wmM;JLn10uFeLL=B5p<*ucz-(eY&FO8pJRW_`h9WPmnhS0 zFEqEGVQ%l{-zWI@CjNbaf6MrHmVZ^NvS6}g^5HyC_kZ;5f2ECj`QPy`gfFV_t9bIJ zV~dKp#aCQqmVao8Eh?TnaK%;0yM%9UI)**8DodS3`*U{1hRZCsVwsH=tTSV;G>!Hx z>@Qm^EY4n)vQ$28_dC3*{UBu-#-$HrZPES|{rm_Ru7BM;EM}S7cP&3IJZ-N5&p+kZ z!O)qsh1ue&;-aD*6y6p+gr>w6U-VEZy{MQ)HnW-|bu5*=s=l73t`Hv1s~cXRZg`Qp z=3Ss)@BDs6TU#XtUVt#WEGS`sLTF&`dY0KoBGx0h=dF}VwXVEXrivISH;{|A$ zJo~PE$^Hi#78U#6a0Pnk{TsSAuV)-^@aU4F*MNUgLJ#Ch_GQM>^Chuf)pzO4#dY8D zM;+fJ@4fiD>Q<}iAdB4U9WWU0oTgI0U7ORXuFd&WE_cOMf-~!2TjXGF=J~#u|Maen z?}GViU>2+@Ymdt`kECo(T|IjgTp%a8LE-Ychsx;wYBg0nr})_BAoYECT5zeo_&uuk zv-_hp;%6P+%k7IW&_m}hh(_5gp`8D-l$ED*gV&`b zuRomY|HJrCA6}8vjq3f9zYO_=Pt+n4mGWc6iSc z8}iks*`BZ$crrG;HEJKy*M{z-FWPTaofnr|vu{V%24M+%#ol8!cpSpFiWV8`_^FhY zdzk~a*dy3v4`Z91z>YhUE@201uHlm0bTa2rp3gAnHO#r4xvG4UvYU>1=$LXJJUXtj zamvaoJ;o~+=3^CJ@t9v8Kipv1a_G63#B+Ri&-Z$LzD;5GPR*nyGsUz2Z8U!awDIle zT75qke{bV^lX=CQ-IZOGQm~&K~DK;+}rLTr!^RlCSHWo9>p5n8qm|gZ&K3RK~ zWzm6)itWp!%SOhnn$G8a@zTh2nsLkySK#!@O~+DmMHWlt3zw<(?%-=AK-gu17A zK3rJ_uSNAbD%VI3?1f5-J_KLevhpMneYaT$e=qRNr^9vUv>)++|Hhj35zaduecEd1 zvjDgM#B>NsB^&?`T4fi~VQE5#tY~>29eSYy{6696uymddYoP-&Ksj`vkF+&`le@rW zx|mtIoqmQQye`f0*;vdjeTuT#7{4QwH56^>QOZ71NiWZW=V9=C*F2t=CU`yto+G_8 zx}?L&T03xPoVKOg!S!MO`uTf;zw)GD6{w|OE@%pJ)V957obdBcJ9`lyy z)D)MA-`?o>qknGfF~(M(0BY8qaq_Ev=+{rj-^clmOuBwG&LrQ_p=~jbFxT>Aj&bmX zqB?Hufr{#mQn!V+u7AF(FKmFguQYva9~U0*F{A!sS}f?#l?_zp;Ed1y4GgnMLqNI80#t8v3*ieVWi^8RPos z)>?Rm%y&8=ZG#R!XBv}rE0Vn-aQdCn&yKcpk*D zCocDGkFRy1-@=^78b4ws>UZWcUO{U)@*o^YE?#@Cq5V7Ia;#F1%eF3Xn&48;!r?mf z5qP}^-Fwf!s}AQq)^G8z!*NWD+o>D4dZ5qJBRjyKZ^Qo0HrylL-yX@)pmn#{@3?rk zH*z~=&D2qgq%4_3@;%7qJmDlDE}N7QKW|pKV8e#TCiA<0Kkn1PRD%oEc`D|C3(+Z& z0m+`=(Dw`J6!{Ld@*z6|JyWAoq!0I?S0ejFvX)|giELbYf&QcSku0CI< zVhGU~v21G$t%1=volZZhAB`t@7vK3cvfXxpaWxOYC0&V5K5t%gdM4J>$($DB02y-k zPdg{gbACSR-)9`jH%pYWm7jIARS@uTx5h{>Ji|P5%ySL$E4y&VB6uJ9FR*zdJPO7q zFDZ{F^KXn}ht2V)=Jezx*kIUt*=La-bm}pG`*^94wxI9?dh@A#xzI=~>FxBDDjs4j z>bq29G&q_b0(as)4K?3qntI#E*S8NFF*x_GKeqSP|Li5(S*wPS8)V~+5u86Kobs;Co;u<|B2B)+4`5+4)gH^M%tO1 zY%yRt2%PF$aNft~=gF z@q%E4@8@i;9@$*{oA;9*nOoOV){3v!lGhrPnrtYB&mPTx5&x{k8i~8$@1a+l2n$Ge z1Ud6sY#%y*Pk0OTWBqG;JD(}%L-r#HQCT4_YqWk}&x=?m<$tOkW%2V-`X9}&^Y_^| zV!x2s^Lv6xB0)CgXdL(@Pv7+!*^rN%w~juIocAH;1!VlrFq{ebOT9jl9r;aRI5II7 z?wLtqH6hP;QkG$E!inCOSvM)e&-051pY^+)pUhlE6Q>JfKT>v`^sU;Bh5O)xhT;+M zbshM3G^5P~KDK8K+noQp2|8qn?^df%fWs;D+EL=2+j$>0;P@e-`7vm|MIjshC1sCNrsr9Gp1_{pb+k|X;XT?|^d8L=ld^w?T-sz~pZ930 zxaj4aqiwxi&}bvQ?aVjyGxVP-2H6ff^K6IgXAOx>iC?iue#P*3_3;dT+yJHW8HdNi zIlpC?eY(Vl86GdymZzff#O|!^Pwk^}`a?EPBG-zSHzNP__1u_o9ld9Lnp-O~i!?_6 z_(!V1hb;0u*B^Sv>6Men|6hVfyxyMLvEK9=W9j|>>R30|jdlOBSD%;O!;fw){&DAY z&E*Sq@^j7VOmJZoAW`Eydh(8@hvB&KtB7YZdcB2NEuhcuM{D(x>XHPHM8HSd8nx zc3r=?`MCx9W$W!t$RvGko$J#)m6d*BwC`*def*z~_T6|nV-?K4oQvk}>;u+-9(#Cg z1VcmdM%t^6@X(6iFI~2?W-O=6WBnBL2yVZ4XU+TC`Hj`UqI#1Tsdrypy(1T?_vnIp znc`#MTRJI%BU-;sJDNq$?SC!$`Ne_1p2t;isDz>$dXJ+Y^U(Y2dGF`|eS$;g>0SC@ zV{z=vQ%)y~&f*_ssk$NxI)jM~QdYR`Jj=Sdh zc^ucm*SnxzOR@0$hIn1fEs%xcT)iB4Xf2kW-xAj=EvP5EBATygf*f3A-1&OuMeA_R zldUVBkL5U_?T`j&)|J$A)#U4%i zPZv)t-HvS?`C9&)qBa_L7GFR%tlkTjM(Rjc-5vLr*y~PzxiyElbGBS~79BVU&+s>q z*sTMxUX12f@}9wu334TTf=I{cJ@at7X$bftSsC&+G)M5T*OWh3?RR#F=CQM;&gLbN zJy2^qsE%}^#`6#QMd<9>Dh{u4Z=#KK;V3pu^>UA#>T+K`1dVO!V$gnzb@uGCywCSA zUF-_`?Ukxml;5-7pEB$yUv@+1>InDsHbkpvL2Oqtvg>))Tbpvvce>|OZatE1nXF66 zr?;WemS8K1X2cW6GuTS>18w@TMj{(Y?W)zM@-J6sx2lfXiZlveomy{fHLJw0D29+1FSi{BTBtH^#1;63eIq7&>AXeh|* z@iB(Ine-t$GLbkD7wEMzSoTPyhJj94)1EV ztmvJ*SJ{Q=pTM7*Y%De-k2_dvYGDeoZ+2tf$RALhkoTW$r5Eo-;K6X2UYwJ7czghN1`83A#Fn&YkUJbr-xq_~#zN6sA0kI-KAh;6!Z z)xDE7OMdrT7+3n>=`)dD!RDE`ow+wsjz34gHkF|s<1@BRsb4)WAvIYr|9Y&0=It^U?>CU4W6b^gv7QzV z_`X(u(VkmV@x?P=%}-K3h;MofeF_hTt7BQw+%@mB%zq_%G})*74)Z)_4@@{68k+q9 zb7fvmw>JN6gagfS6Sx#@)}!aN&zaOwJD++>F0riUpTNc59z&HGC|_(N>t4rah^7qusq_#&NRS(1h&|yV`cxb=We2+@i%X$_+FnYm0e@NZoRN-B z>NZeU^+YSx`(9P?BGrq=!$+dsFmgFmQQHVlwvLMbIn-(z~?Tp=3d5Pt=!6c7xQ^DFm3`4eg6o$uRyyr?Uu*ub~bKTpdEW1b38N{ z!!EpFofJPyKWY41$)Wgbi1$f(1LcX&le5a)6+BYmyf%- z?x?8EDD~5}Jho@db8UM*08&m=f?TJUX0sJuuB4G(kI$ezwDdmT(zdG->2+_!1EwpP z6NsFO^j~H~yj88i$AUu4bn4Nf5I$f|RzP1WmRCygL+s*fteAl~gFgL~BwDYXQ@i=N{3nUa&&MG(C&^wwMuFCV;LsUMZ1+XPz0`MN ze<${N5XbTp9j17L2Onw;cfQ}jrebOBSM$G4EFmZic~M;Slf*?A#t{`Corf#hF9^m$ zN2{lyle5#YE22CZGi1S}A4K0;IhQO;Kisrb@-289inB|Ojwduf%{%FxSz=kNA2YwB zwMFZ!{0n>)PB3AwK(7d#yr@yt8|q|3SNg_bFS!8j0MF z4S~?i0paz}+pKvpwnHgkpA=mhUdH|?cI&M6Jm?ImNqg8^1YhKPntbbco$`v;zfg91 za1i=3SI^l@ijh&@QXT95p83?;#F|6oLlD!02M)pmwKiQ7dm`v@a+FwC(N7-x4C^Rr zg+4xOTh<1EFPnG#9JX!BKE)qxQ^V_Ii&|=G-G6jzhZ%UeD9`i&%L97Rx@<%!QQ1Y|YBdk*yZZH&q&U${1$jQC*1|y7viNv z{@=VT(jQ~-r}RLAFYSR}%ytmYTpnmo3EQfIjr3r?k)%|uS$V%naXWOe$N1OU+V&>< z?@CZ(-x9pxth^(BU!HsaO}!^B1P#2-u*Ko#+4_(ZrkWBR=Q$4ITdDfa7_5}N$tU36k6_6kEM{uZuT~R{M`mCd^;8}do zT1@yyJm6%>2X^|WPn0?Qw3GH8XwcqT< z)LvT`^wD0hY=|$y1N6rl@;GbAqsY@ISwkLKun#O5`uYv&;^lj{lQ*=-KK>T+JpQcQ zr@j9tuvGgmOS|=OmGv{hr}8B~%5Ruue^l{4oq-Gs%Ap-{d8rvY(=I!sTK#JNmFk(c zQjQZ##O#z;tUd2_{sZ(=YU|{DspMguzeh5-Rd&5%c2S=35Vrev7YhmeA)BY^tJo3F zHft!}_GQUZBkO!q{uhY353+WO&!o?G@$PQNXVE)&6T2;Xx0`p%c&GeGwF{2Tzq_-p z&!95@F0Aj9J&B~xvHCvYx8&V;+^3g}hu#kHYwV#F))lVsN=MrGZ1YP0*K$6Wd$V`9 z^4aRiM(;wNLh#=OZ`rIzK1R7uG_JQ1px^=Jm`QJSg=x?1^l{k|e$(7uUp5=oJi}v|c_Rw#Ohn{eGBTrn~ zXzA7BoniD98C||tY=sB@%Rg6r>9Aq;ipfdM62D{GPh6h1JuZj2-`Nl7UYEDN30dw# zjtj_fFLK-?Igah{N#rlF!=;}#q?Q+-!k!CqC2MIx$3qKy!|hi~_Lf)&*+Cua#0M2{ zuh>Ke8<2M7oph{IyDZ<=#_fcMzi9EC3?5+|$++wd$>av=JV}|}&kmLQ&Q{6O`Rw+- zp#65%lz!}uc|G=xxwdBihIZ0jiCkx1#4k`@mBTY@K`C8S-m~;g`OtE59(-)-6Ek;{ zkI}~bmtiZlgM&4cshv-|9I`HZw1HTnc>AO9?lO2v?bN2We%nu2zx^kyzvfly3&v-F z?VZ4x%zq8@mu`o~s)x~45q~PT|AOn)WQZJ9qO%KQvsz=|8Eic48pUyC zd+0fd;~tFhuCZQi-H2?lx-}zYtVuJi7xJZZ(Cc~!2{vEMce7D;7^0Sri(P&e>-;45H7$mGDwy*LF#k-t;XpQ0(=@H_BZR+do zDT(>g6v5F5y%5%x%qO=GH%6t?npDhi9;n`Odyhw1)MF)*w%?V}FnQx@VW9h=a&~ zP=Bh|OPypby%?PmUq*5ye_8FWr=8?_=*4KiTYW_P-I?Ne{O&&9DfWKHi%;>{H<$`!X)JgEv{F3Gp;Y{(MKZ;}DtNR;^d!By^{rYxSca5t@-oZ;p^CVQ+6PJ3n zr?1i3BAta(&PEj76JI02n{t=cf06c@kMu+`-ZskYU<)x{d^_tnpxkWPt9pM2?*eS0 z0DBnvv9ET^xY{>E&%j6Cv=>NxHp-n|XrtD`fnFc~jaG?kf0(jA+wa<*Z)ZN@4D=i3RQN+jn+GO&$KP-z;+xPq zsjq&1-1={f>nD9{4_f0zI^n^|@4NlzTPyYB2xieLvX7n58U6^E1YZQpkUd@Iu}$;WbE02`7s-1f<7%g8wY}Kd<>DTa_gv0% z&)DMR_O*7hzwz&(oz@$2C`PK)j*(CBU1#YcS@%Z1U+s5muEEaQSJn9qbiqipW_ONA z&s=Q1`Xl-hjqUZQv6T%*oEjP>xeDU1kyvN#nbTS7Pw~x^-8>lhA$J}OG5&lG=zpr~ zQ)f=}UbaJon-QKzLf}L15HlvvLgn|pRL=huZPmZ{b1{CIMp7N|rRJ<$dgalBYsNg9 z|Hrzq6=z8JMLd_-MC?J%*+j{?glMh5xXttQOa)>ROYqP8;n}qM0 zx7vBUU(CBKe{bhKV}lpY553;AKftz&`4ZdB?*q`7xy?PA3Xh&zX#}b?kW#7T5g?m6ZcCObd8Bm-(!#bk)_j;bO zNmm9Z0l^9*dJl~3(kZv1?ADb6&(L9|_MIdv@Vvi`XXS>gRf={V?R@+ibe7_C#JWB3 z?yX!*S(ZPQt+p-JdW&p<|UZo}zXzM~`k zKdh#^KhK}?8`cp+`fEoI#h=f#7KzPx7XDJ_q2;D$`GmwWXcywA%%-c=e7DMtoEeov zEBv27!T z&VI57ZC1eZ(R+QrWR9*Iy0;e5ws=-AeTCI?-6P6utGGT!}&P z)3O!Pm(ou<3l05|jfCcu5kDFhoe57tN8Sm>)08izU2v%1svlWSuG;NaCo~l-$~UTh z#4Elz>6_t8l`(m%!${i2s@`W2iE?d+m@zF9&2)7Xl_LjW>^uw>U@k7*ryGkeVI zu#^7=cs@^^l!e%XcOMt8qeHfcSHugi7WAL`ReL=P-#@IrfUd}PEvBvX6uv}@bQI?sR;ZocaY~E&*{-B5 zigCH*;DqawyBvT;`b9F5lx5;F$x+mYcYlg9otaqgUjn=(ztg`q1uS>#{s(-8`&BMG zl>3#s^iKZUdUhbSMhn&}?38PxK2<*{|6%o%Ya^a;?ZAiHUPfEdy#Q`}+K}_smV*u% zvr7wnHUbZD3`RC;1V_p~k$;|fVFy$MM>58_>Zz?}KX?Dvcqcd$m{li+oA=(`8eeb- zcfn@m27Lk_r@TRHxahYWdITlC9S(iUWZ$Z?`K9J>Rqv`cszH zC+(tfhv#f#y#s~~?7y#A=YK_UOQ#Kd>US3YlyN%1`xSHZ5UzwjU~CsWLFtTOnbcSj zojP<^2lrxK(M6vvNuTPgn?564U9?Z|-<3ManmfRnTVl;EvgU4L-@A`}?*e-fy~Hqk zh{xsezjLzNPt00y@=UaUhYr>{=Hg5RKF@~0cA7iJj*>_AFu9fTJ-vI*py!;dVu!SF z_eP7uqu(78B}!zq@RfO4{YBs=#&Wejz4(*d6ZbtEfBJlC??wLYSF5vw8b>zWI&eka z88WB!Y(w|C>YIoMM7c8R^Mk@O`bw~czVz0+fW{+MuYJjWlU}4{Y$K;f)Td%t%1hbF zXJQ*_9NCLG`i#cuJFv_?+Nk$`1MlZ2%iey*5`LnwlrOh+eyqxc$I=+AOYoWB{mbYU z`B>LerhHFJZMpjQ=~HvQjWXrUg^Zt+m3S5&o~^<6R`9KSgj!thuEBL^<&6>i`2#+5 zCdbqZ3Pacz-bk=1^!}3Zv@fGNn(I0I4AoOkXHr*s>+{rWx2eNPUug@`$B)eXsc=A_ z@{RLfk#8LJufG4DSfJ+lx2nUwh1w=CxbcBQW1p+CS55uF3)Bam17~P&+>hD?PRvdb z>(Dwc-a9>WJ+=zGJppf%kMtSxkv@&R@+kJoCyCcSf~=pwmbn32rh+Z=DfS{Bc6$t) zS*r@j#nZ^elkonmcs~s78GB&nq~q_Y@J--VeyrJ%Fm)+&Xs_5w#kI*5Gusgg2ZHGb z)e&^VaGrM)=o{tU4C)zO)*g&?5Svo{+B0Ptv{QID!A8YwP>fyXb75`aVkEQz5w>=)xnRfRNwKoF|y` z1ao${I1Mg%4-Xuj$uj?DdvK-%ZXN?SC&9}s?}!(nJCCgWCh$B7TrPgh8G~KT+s7BZ zJmg~C_zNCwfIsSYmVRsdOl*TSjH7;XuAlkboZ2zvJ7^5WSX7rBDfeA@Rj)N>GLG6Y zXWGq=p_~P+2fLc{+#Tu_`_`0Q9z#^tF|GRg_cHUxHv`Y7d~`bh_Dlx;gZTGfg$Mg9 z8GE58S`$W*Q|Y7^@R!b@ztNM@mAOh9Uw3kroOI=&XYgUWN?wX}xQDzb_+^xSj=`5_ zVD2;NEV%lK^z>QAIKkgBY=Yz*1UZ&g@rqsOChaqbKX$t~m2_pA^|jys`&Xj9qtjoF zV$-i{x9k_cO01T=%PL8_r3H7eFee>58!#=-E`GkT) zd&dbJvO9&Z|55eWbN=K+Qm4J9&NsM=L*>dT*IsgPXuBsnHK+_}4e}NNhkU*rve~R_;+Cr$BCIYk%Q#q7kX=rEkpB5(OCgFmX2b*YYTd`b{@@#oT1h_7|Fz* zFxFv%(L2SCr+D`AAB)c^s}Fd4;yZEf$}Nr`%Dt)+#k(T?qq|F_q6FP7dMIf4e)h7xACIGjfnVG-tDa93kF91n0Z=r0rYx+zqT5>dB`1 z5dP)oXsdecwUO(r^W>%0JMqglIX`X4`Dyz8#~Q=mMa*;{KUW|8MfIn8RNwd~J$Wbi zoKgLr6ZV@tPwP3yjZ{`zrFd@O?|^@GSB3UYhNIXTw%a=Y9_4JJ$96!Y40`RzN{uDF z-pBm)%z1a`U;Zxdju5kWl6cH0^f|(r#xK1~w9@z* zTe{&Oy2Mf)>wXXTMISvYMkQX_bD41Nad*V20xaOzUgK<}4e8|Yd5lH@eXClg%wR9gkRo;CmA zY!v&|Sc2t?(VU=P5`%>ApsQeC1MESCoBTNbq`qAn^iV`k&I0=*p0mXt5IqZCM9;ga zU%?g;Y~tGwT%>+iT>k^`$O$Wfw?^CI>@ zr@Wy%+86#_H}^rV)Vrg!5oCf7{W5`m!KV5QHr1ym&@b3Pk4~UpCeSYv=$8rf%bcxs z{$5FF|5E2c!wR{*(fTO;sC|(jXZC00ONkePT+Va#;6>G|-8UgV-qal z@%ve`(9&9;@dH;l9C3;&{#<^KctScave8@a`Ey5i)=l{DL*xNSUR6im#mm*y@<{(p zN}uJ>f8|*JG0#cqv+_E41ijP>ZD>P1*Nz-im8IvW>}h;*W8mFPstZ{R=TWYYB^ zoN9d6&m-u{=-vY1d~TeYI?f(&`ZEJ>Tu6W39qZ4`dHQn=_|=>f{du_^A#VNr+PAEV zY^rYbr+BGVHb?ul#AAoinH^rv!7RM!`wg}x{+^}Y;GE7h51oomd7gFrGc#|b&m45l zA?poxyDLv>7B9b02?#pY@pucnLr2 zQ}|hrPQXjp91C+}2I0T?7;jz9%2;S~b^$hZu$e#fop?L6th2uar`f)c7*-pZ1FTWH zfBOT>;i#iAF)Ly+A?wCbcr3SqHIr+Sr+Ut!Q`N^+b_QK?mOhrF2<0QT+#{ZQqth`u zPXm78pJ;uZ=dZQmYj{cgCmofnryml1kTtEFcjB+>Y+R7*M-E1MR=YOL0r=;6qao%E zay}NUtq;e%(LgTqc1LT`keqWzXM9C?Q*_q%8?ce1@1D*;;aBP1tL4ThpMdia2Ar&8=bsl)j)C60fB1Q0_?AHd z3X;#((o*hY9pIeqP+PN&a>kf@NAckz-zl6XRx+O9w+PnbeI6vN#bMKKmw@2P&15gNFfLHL% z$0bktey%z|4ykl{H21{+9Ba-2&rlovlWU#y-x0$x%;zjN$`kN$ZQS6(ckifu*xcoC zGAh3|#?4vswZRE}h10b-)LezbTD$)p@_EA0!OuNfZ9xt%cXgzj8c|C@&k(cG+B%wF z?@#JJ{(13Jei+bC-r z4y48RtarO&7!3F_RyfcZwxScgDM|9>qV;hgp&$r_^XF!j0 zdgg#{9q{D#KAw+XY+szXSA6f>iJ8`rRSlVPxM9#>6MCR<201u`t}xCsdfnt$l84@J zcLC=JS}TLEulSwx80R6`N11g#em#yPuX*~uVE#`<`wElY%j~ejRfB~qg{ugTiv57G zXp3&IY|U89fz%q=&7t@G7*{Fl*!XjjIqa5|c0()rgv1)f_cwyOa?j7m=JZ3>%`&k~ z5B&JxD~*h8Cuele@w1$->m1u++&;h_qDQ@sxq9;dG#)E$i%qMKT<5eA5(q~XKu z@H6-0AUkJ?Rq5Wc_5O%m9?L_<_KXuNE1)~uIHM2U%H5rZhK)1Cuo?fLvpy2~ovn@> z&)Klc8xowva|L(be_*bHJ()uS>)GlsI^H`jUI?IB0%L+Z>9MT%S@a|aD)IH}aOm`{ zaQtd{J@q*q+u&*CtBBV};q|llE9*H!q&-?^Z%pRUjpYNc#5@z=Bl&iNtAm}sHQ@bb z%dZq~ieH7N0ornh1w1w^89B~8^Fi3*T^!f$?8sKuMdurWO4^l`7glh-#-z%lJwos_ zUrznY@XJ&m0=Q4nBFL4z=o5VLtiA*rzngUcUdms$M(g9vj&6EiTgSl){Uf<7AAcWp zHMfQRt6$-zgFe&9DD#_Z(=pd3qGyhHitguKcqURd@4U@%;q!cUuoeBYtC$K@)> zZls6u$A3mwNB>`kqbgHC_BXc6;y3Ar9whkc7a@D2pIs~B@+P9L5Sjr<%uy%jh; zWGMGz?d59yY1BGoM+@A!UP)rl=j!f$linAeYX2qirsVF07s#d4dlK8-=L_f%eb?{e zoaT3NSlh?3^ObknCiwvVap_e)U7Qwso3(6YTCv<`_)ONCdAcvOH5Jo4{YKq0K_2ek z&F9G*_|Z5z-xTyr@dGLIXI_V>r}zBETgJggTgBXVQm*@g!oSgoH_@%LwVpSJwQS@x^<$mZ%9h6|BS?uD9cekvan zPFb+&U8Wd{a!LhL=j$x%g?Z@<#W3{+2`of?5T0Hue$tK**>aI53Uz%y(L&?DSTF#p0b9>O2qVIsaJ3FbPTwB%a>Ny<0zt-6k(8t|ZFv)$T z>PzuX_3wwH?(FbSzs{N`xt}P=aa%XfDRPA5pGuG{D8b}pz}8_O4u zHGv!MkWoAQ8hi(ApUF!)rs-qm&uFi)`Hiq*+pitX-^2GHhmFQxGWKu8V{5&JzmoBp zgZhc=OT{*I!Z+X?lg_s!_Va9E-j;rn=R^)JT(@h^?tZPhPZzr8`Z_;WVD>2Y?*t*d zhD`80BN>`45X)=N;Cl>@%O+J$itx#I?2k$6y1Wk)J60~F$#7FW z-4CmKQnfFY(7B#AYMXPoxMBQq<98OUuu(CPJbQr8IbPpD%%sJWU77q_ZG+Z|c1_`1 zDfdKu6kHzz{7&0Q!F!9~7%Aw?Mao{vd)Yk&FYD$Bufp&Ch|AS)w?B0`D_6fBI}}W` z+vn!K>&{T+0t!z_`J1UH8lyjYJ@};TlVQSNE!{Ow(VM+fmZbsH?+K>j-+5@Xid!3# z@4`!wKDD;0oxWexCv|65{uRCezmYOlNwwQL;ygmiJ2-dR}zr z0z3UbRM|G=MzkBhgvq>;f2(arDryt`p2a$UTKl==$UL3Gj@#O~?UvMsxc{-VTlXAn zmW?o|vS6s9SVl^D!Qx6xj5tGEOvPdaVBh2?yu1J z>xmb;@4yfcV-!5XOa1r>d^%5>z~tNZUis#2#1MVdzT{Jd_5PE>FERJ03JFg|pMw2!qDxx@-#&v~z|XA1&v)Iu z6Q}UQ-cBE%(;nU6YTFm{WyQYoZm;;Ux0L(X4{-Mk!}FX;o4-5XyNocs-JDmS!PptH zMlOQw@C6;p?c}_1U(0G6cKkxl5PnWX`vSPEl~KHOw^m3_6Pv4*GftBA zTAgXJzU&}(`$MUQ;$^YEB=5!P%e?mEkn=9?@05Psb~&=lo&$NpPM;^gPva4l<6gUh zANP~!UF9RlP9biM9bK{a(q3!zuP~PSva64xYoq5`ez!v~sJyiM=-e52`}%197c{Q$ zP9L>v{UO%+A?S1?@vUvxKU<;KAikD6b4mQR+5QXnc~!8T8qm}8Hl0tOkA-_DWOvDS z%kllWTr@^4eiD8EF?dS%#@^nP=3dk7eJ8^`EntvUuY;>{&L%1=wi(##x&hdT)3TjKRhtnw>~#QJTq()3@Tf~zOQTzp5r>( z`*g=Rzwzj+4!S~t7w)V~aRHyR!`cjLhghhlFQ7w#cX4 zk9o$G$2>z0!fxO3jN~uk8GPe9p3&Ll(&EuR@qy?vM^k*F^}v?U@wI3s{V-3n!_c|k zQ=eLAl7ET*Npz2F;$wa%cYSzyV(KnNP|M@DH?c1Mg813V!Ubgn+p{ge=1gQn&-HWs zN#x>}nX~9V0DsH=hwqS$!;TmJ|HuF2R}eeX?|kifemnf#|6|L+{~P}2yv>iz|B3%D z-Kq1U)sFx(z9RahPrf40)8w734Oqu?-*n;Y>~rJK9`m0X*L}~jZ=5bh568JEp6Wiv zeXh0d2WsE59-#Xt(EStWetz5b;R$rV+fUu;{1NV;S{eVA*P^3+iY1)m>^nM3&-f7| z<7eNty{|O){je)5AwQ8$i0b6x@3JwXc8Mgg&(8YO%lh-GcSaowX|VlXOL^>7X+1Ub z?2dco`@EGqHuSyGK6vk2tbZj}w?b>~U&E*HUQbk}m5@V~^U~-z<2moYhx;>lCYp&H z{ucKVd|daI>P}g!t|FaA|LnT*o2>GH*fC!dx2*SdQ372-mv{%{jMn4eouqrK5+cwoDI^t z-;DbgoUO11@OvH1Wp%v1kjL-rz`q1Xr<;DBx#A!Dqxl6mN~KvJ(%{6M@0r6Dw?ow7 zsRwK=0fJHxa z9D$A;$01hyw7=ni_vsce*h1e^8@t$Nx2YCz|8G6VpTDo?54z_B&k25o0|ZM|61_L_IZYwfna;>x<7B@)Ri2;C&XcY z{Bub!!&}-n?&p+UP?CK)3qnfnEQ8q#2Z0}(h?pCDbsjmM9y_zPN^%j|NZ+l7Yl4zT zZvRxF5&MrbnH$v3R1ewFJC%80F(@gf96uAcmp)N`C-=>?%fDgVLG;UHklSZL&jZxe zZ)><1=%iryVRd#5wo4__L&D6+q{~0#oyzrI```2Lu}7TFn*YtDV+p-;2DBN$LkuH2 zH#6&Z9#Mbrpvz&^d)eB;tNKZD`4;#^V-;Y<$AX^+H*5!vp=rTjnWolJhJxhsjK``(Vnw~ z;AI&4N@pSm{7Za?!Z$|qlO2)XU4;Ln`%dwD@Ocj_j^gZV+3$M(J8*(8j2|4m^Qe!W zBtOpm&L;axQBJbq5Anx$-JR48ZbT2(F@DeVvumdqo5{_<1K2uc z@q&BSeT&LP7Obi-UQ6bg+%c8V;puSi+Jp|$NhgWZ9*|82?W>o|p4{G-qWnyu?DjRS z60ec)&Pn2`Hyz`?sg)b9{!!JZu75SY>4C4MxrYZE_ddsS9mn-u<>(UbjTv+_PTs*A z#JIR4_e!nT*bY}J_BX_OtUY|k{{CV)xhT`FBu)TmIh)G$}t&% z_7%UGJIvn!AN$}?cNmI)g{vWO5X3m)9>bYM#3gk{*W+ttr}yLMMSLTkT?Drba#D2&< zn{IBDY|=;0D>m~7M|cRVM2NZ%wnR5EzcJ^o2>kTar8*f5HR#Wny#?hQK&O9vT@noEhj6syz>8gZA73Tcqm_|S8e!ceU zWk)7@Q1_P%+2D918PUR7GR7Ae<6JxjYt${-|>Gk-ZvOe^(8mj6W5tw-IeCfcIeYO$=UGkg=hK99LQp`RjVV| zCHMw@biPBeu1$Z>Zy zGRH*UkT>A;O+s(!svD^r>8ogs88UoC))(m~o{?>jdEqmngOW9-37c3ll#F?dG2a`H zsq%~M{Y%~itMpDIT0wdz>Ejvtcz@i7WK(>a$Y&BSb-cDtI^f#5`;T9yoys$H<<0*i zD$mxH=i>6_y7Iob+^;L&9GAD%mERbbx7U^Lip$s3m5;{dxw`U0ae2P3d^#@gsVkq2 z%X{m}zZjPn>dLk)s_4I5aF#@SDuf{OLgU&;_`vI^6TUB&2{BNaryOi z<#)v8gLUO&arxG|^84cQZFS`*;_@5o%AbtOhw93oiOYA?m472H-&t2~XCwUFR#)B@ zm+z`8?}^Lrs4FkV<-6<32jlWP>&kb;Q?>dXe&4W_^=J$7?&W``$C}sS zM>G=q2y%*>vUU|@4}0!+8+7kxW4G2j-2)ZHMN+g^{q}#OGe)_Ud2(Z#W7|f$>_Rbx zYW0Q!d$^1-gbr`%es@5h#6j5W+1h5y-I{TlIlDZOo+0wIqS%A#BzCvzts*{?GdtdE z_JH=S1$&RRPHn;t1LotW+2cn?@;N!9xe4yqTHjs`hYo+0S#Wr!28WM;!xnIOLmdt^ zKl6mU1dqxUxDXE6^IOS!`9PJ}uhyy0cPTf~JDz8b?cjD5?~-}0;~BC{X>M6-qt5yH zb;+Dro1Gmc|0vPZto;YMgPj;fWRDP^0B<8lh;hj-z^9G)pojA!wLGWx%HwqFJ$yur zXCH8LlSJg}wZ-is8n7V_oO-92neZSSRI81w8|U*-kLVop)w#I}u^Y2q>tZ9*+2=)jS0R}Ex8$A;nWuP494}F9v-8mH{7!AI zH7Mk~RlwTm;v&SttbA{~+`H-`bz0&&%WUs&HQU~gD|Y3* zo>NP$4K7v_#aJ7#iMW?o_SBUP)`ndxpPM{#w2}U8IPh#W_a4Eu9No}tdCsrQ+6Pm) zR>huFu6#b#do_5!P5!s)+?>j7(fLgE^Ky0XT%3&kn#0mZmvMF~-MT!Ei*UCtcF`)E zdN3f@jNEJPoEl*+BOhOGdwz>wPye`lv~Qq$h%d|}b@W~FJ>AAxHGiXU-4%Ks_p&~y zJ$b!fs+b9}ptq&^iSh9}z~IqaAZMztkvg1{2;%s{V z0gs!j=3?@SXSFIO{|-|;OECpEZf*}aD)aj(BhXRzgGO`8S^hY;avkWg+?2!H1^J%7 zV!qE4e-v(nZ^12`{}MQHZRztY&%%}FAfG^Zubrd6mbe_SGq;VO(7H?vAuAeR2{zcr zaQh16Sw?#r{p1Vs42>h)9dUE`cf`;nQwe@@z##aOIVEEVrerIf9F@G6*J=$I@)F$qr1%hTy*Z`}>ziRT z1=fs>9(>c;o@U=*J9_wqgUZ`0a$joDbC$DSLz&LPY3nRJK@6sm;|U$dH7D_XK+di3 zq&wQ7)5g{GBb-UENFR%KsxN)SUJe<>(LFPgC*swE`n{01^@zs`4~XBmSmzXd^}Ut4!ha)m)F#nyiCkXHFMm~A0XvM?MYs0kI8jUY}FHpqr-8sEB|Y^Ysg1Fa4HIXh@Aay17l_RwN@ zSaHlYD{vo?_G>y1)Y@UPsj!@|JFxxzin+NWtyX=apnUgluwSP#or`cZDf|UAc{}Ab zyvp2G+0h59)u}>)E3JisPxDsatL*Ua%3j01i)`a~?5i{W$X` z#~U6kK<5%`GxO|?%)txt$@1i^i&f843 zY(c7QrG6_dI&aJR&3scCZ=G_AEaT@R+cg)T!!j?2zq^Lmz#`US_TDs*=*zNfF)dRVcg_#T>1f%68ly7Pp8ijgWFp|YLv z8UN&t)Fh_(g>R1L^}dh3g7!)LuzvcA_RyN?Q+DNII8HwQU$;cCYutk1mkmKqn0|YO z@8r)e%(a(Ks9er@{3gHgR6bk`4kur_%4BJd=0JI&nw_zL;2#9`xio1n+J_%3|SU9k;zjJtE|qIw#u#J*y3 z$B*v0S!4ZM)usfjvV%3om*aj_f1s|uKUaT5capk$Lk4Io-$-pYfvcBjuRb?ZJ^=nz z9-t%n?%)$Vf=hjK>g}G*;9S48taBSY&lq>7Y5zennaa}9Jid5Eb}x0NORnx7_UOua zp2_*tT|e8g%S!m~+yx)+37uvBsw-Pq>%@!rh&pGfGVQymOmNlWruP0L;RZTv6`X=k z`@=f#Cit`uCY&c@eTT6U`Xu<){B<__!|`v5G1f%w9vr{PxryI}b+HA-PR^HsGpwPy zr=_DcD3JlfxsPOAYzxx=9-nvuJnD|52Hx!hCY`YfV_NsZ3q}4m^Ebd>iNB=2bp9;+ zm$DbR>!(fadWkFiYw)6ebtdb~t$z2pb;txfuq!TCpU-whW!lF-@xJJ8s@`uM&6lol z@`FA}(f5YwQ^29VZlZsEULWqcOE}XVu!@oVvg-HD+OJYCC@E(30qAFTC@xpo7A~!b z;K=~bXkKHhPVLy6YsMD7qVYTC#!u$@wiph{cXLcX!KC{;)aTJyhk#@Ey|*S8`HpY# z`>f1e<0f!;*jOp{`cAwLI_Fq(IlFW|9tv~(D0#d-9N{?Apu@)|;8=}r75$R^+D$cM z9%0NNXD&9X^7ywFi63b{E*kIYnz_%$bQc^i)|5*p2!|RciPcGOX}|U>w{9Pmt(oLc zXn$>%JcDz{mh>BTP_I6dxG(&B{=EgPAv!Y~-9NxOfPL6zIqo0WGWYv&=@_Rv3s?Fk zYcKpYxgxs9OYoipUd5JNUg0LzS=JK#M=#+i^<}B@y05Sod7*Vgd?h#~M;AL!QBAi( z!;y(=g+E}H?CO4m?6*hrzYHBTN0*bn^k`nc!>P5m44))>$?eXbT zxwcF5(}_;i{H0sA@_Rw*^PiI|Ej@lczgzTk;(f}bXOg~@OL1NwVaW!p#kH5-G0)4F z;WuwXg+D`ZXai#+2s(tQFC|mBzJYG;+&#|;O`(`Au5yITiaH53{=y@ zy|=HA@@ZTgb8?7z&(jcE*&pegXr@s-ODvt-{-sC9qchu)Z7@&I685R&G)lkz>R=?|?sdafi-r+@Z6RJ9KuCe?P<-gc~`7 zuuXf&$3psES@c`Jgv`!*pW_~@95$I~7F0O%syQCgdU~+Cg>$-X!Ugp-pP=WH_65$M zYTjSC#P4=@U`-Br`aSe!oiBFheETOgH`eR6bDZntjuP%hs5sql&6S+9`1Vom8W`!8 zT(v?A#<()kPm)93gRQcp%>eZi84$g#1)UJ%T4z_r=#x25Jnfa-?|>(FxSsjmynT`M zFWrdlReajPb6ZW{N!fT!nRMM((7CLsqw>{1+9&?ACLo=jGgd7YBF7%{`U5K z7qM=BPpsfGSPHQ6m=8N21s61#OQYquU+W;@54ZRer1?LEf1<&#ae z?^wq6om^sf9n0EXCzsjSv1S`P$(beYAsi+Tgx|~SwXE?^{n96K`&;1STgT~VoIa*$ zKTX?d+L24LJ2_0=#2&jGqZDXIbfQV%w{bnLNXQEpJOUggQz z?g{Vu-L240zE?u;b2apC07l8+EV*L|ZN-yG*%H~b*vX=|wM4p`A1UXz!lK;4$rX_; z@Db><<~xyoO3E}3@p6J=`5cDNVOAc|dW)`gJXxfjU89IGxFnf7t0O&OZg6 z8j9awT({=sa$Z6!=}G`kB%1S85#Qw_x7S(U2LvVrSyTF+CPz8ljETgBm~ z)<&VfLEcAqBSx?bpQ6P(!D&LL+UJC3!heEO@&8u(5ey}4bMHdu-nBsI{t`449_bH#do%j>7WD0{=-V;$t?n(_hrYe5PTwZu4>SHS)YTf+IVM;LpAvG+3e-jnw;PP6T+)XwdW?_Owbw=%a|ncGhK-Z|IzGUiDC%Ny09BaZy zvy>;io%EIXPYEwxY|Ot%#)QWbe@8GReb@RqwK_QIS8zR316RVw;$QJ{B3G(+hI&h# z&Nna8BghtdWVPZl$k{wEpwGS+%ipG&^*Yv1PPgzJomG;aS}0S4wAFZ$uU$Orx3}d- zarc5OVsv;SPv`|;a(bEZ=hv*{eY!aLy@foPb2iQ`@Z>G<Gy4Sw)9)k;Tk(yZ*tQwi6>poL22a; z#(mfDVq$x5v?%{&18aA!{rw_s^j)$gJ9LnEgksE!#YTRYVapDBonr;>dFtw(SF;`W z==b~DF&Oo`>9R`~YhRjw?fAxmN52#Ax8y3nv0m~KdhNsy{)YClWmM-Q_%4!}==&b} zB!6bET^`;mW0&hL6Z5`YEv?ZVYhSA7UaxsY_8a|wITy%fG zcz0HJ{s7|=n<7#c-95dCPx9lP%r1UoBqx3>!;SHG$$9?ec{W{$G^qw{T8fXSXc zarX1}$HsOLgiqUMe0QBe^zP9)p8k!>2^fI)7@K}Nx%0%!Ut_~tfdhZyf428N&~X)K zzTnrlTXIVn)3Rkp0T0|OcT2J@o0cp)j?<7sEdB?^j=a_0?B(?;X$H40|X2?01YS*(h9xl=|m?_7HnK zMb92`{U6A@DcbcF*sF*%s&fl?erWo+yJht6QhQ)QwQs}qs4PRddFs!6=I${12IuN< z@4|f$&$^SJP1`~x>#>;UWo#W>!~5a+oclyA`#XXD);56YU~Qr7F32x}?9&1CC+7q{ zH?+~j7Hul={|2}k!Hh;M*k<$to>zSa&#OM2ML%TG59(Z7H~Nb_!1;mCfRaDIkF*>! zJZt~GC3toc{eJZMSNv@V|K5@k{}|dq+b+g{u>WbBV!ty@26-Jq9>eJGH2Ql0by|qC zjIekji^uu=HtBx~dc4sg^f$Mf&mo)G>9FVE zIUt{TeHB-Ab{b)Cfu3^0m4p4}qWKIM-r^%Q()5^ZQp3Km3pvVVuF!*5doA z9ZW~r!DnZAzK+kfneD~9rQSW^x7$P+#&E8ydr=N>_VprP6Tj-y6+u(B@Y|O)$Ommg z8GLsyzC(aP?%dHv#{L*>>#Lm&oU^ zwh-+-U9~|QMtzx<@!Ze95%IhyX3yh&93OfnW?6|W5f9F`dGNexmz3a*Xy)?|BT=kA zAGuD(OdBKoEH{HM25`?4-v|uyJlhhkD={vh6RY!V+&7|KssdN;bFnT5QAe~nd$V;8 z*sgOXIJ*tZhjhROb`ultx%;1IfL{ps&G$}ijDG>gAAL=ogM8_zc@DBYXdL@%$XAR5 z>m1t(?A?DAYgV2IxgLA7D=;Q;{s89*yB=A7g|m%3|416}>m%1+frjTFNpp?-1UlkR zj(sThI3HJq{cxUD;dv2M9``G79;Z|F0p6+AVV-lma=mb_Po*Q>f5M&^+tZ4+5q}+L z91War)D~lTj_-o=3|}?I$V!oDiw}1H&u8Si=7r{Hy+{h%d}nBNh6-~Pt@Ri?gNw$ zOtT1O`0*}UyWDLkmt|h*-PvJ`>6v}sIs59|55e9#$LZJ~!H$IfQttxKoyR!?{9#X> znCZx$dK%A};@xH6#xpH{?v)_U83G#N8N&}h3rjxWJ96=EwFf+sQF)eK%#baF`CsYX z&8$1lbmw)GAvu+pJSA)SbZ?)IzzB zM=)QzsfS?gyz{gd-x$NQD3Dk7I!T8uQwz=THQu`q8@F%3v~d^nHqU9It!h5Kq0#Jn z$~gmef|^Fi64+|Viw5RB;`%}RRnMV+!swR|{mvhrr7=zk_NOw?B@fpa&y8X7EK%>s zC=`AjMKw-{!G?|X*2&`Wr1Wo;Fa?JID8T zoAUtUz5zPsTTEw{gR}8iDe*jPq~1u&QLoLm?fa~{4%s`30mwR-LV`9V)x@#j1< zN7=_`7pQxiXXeH};+eVEzz=`unYpn)@XVa46a4GW%$aFRW%4A?%^6rD&39&w-^Imv z%i7-_{IKtEiS--){R_2+wHNal?Z^2;+7I%>+V}Hm?b-Z*23wE@TaX4@kOo_j#`lR+ zCgWYRxsQc1@BX%?UfCGWL%v)e%DwyZTJ!#ln{&u9%pd9=W5!-v+UrX0g|yG1;Wun)%Kr zu7~|vsh{=*<4A|>SjYK?`s9gPhB3}SnFU!KveWW?Vf-e%fpL2W<~r7ax;t&a{8lFP z;Z<8uKjuUK+dNkR*%esNcNM18p4us#HRV~j&8i(O^0yYvjt`(&4!g(v=X=dFwR}z? z0lCj}xPQrY72bJ4-7<$f*8@YY4}St3nQON@aNeLq9#nO17p__2IlImxU&;LlYbrbK z2Bd9Ob4gfwGly$APkEplu>Z!;f4#t9{xh?v7xtmd^REMHKZ@UR>BXMZN2RX=efJ+g zKMY#+EF;b@^k)7f%Q`-XIu_&&wP&fV#SRxv5*Fl@ptfm&kd`)*VT<W~Cg1Jnv-m4rghBcb$Pejou0@3Xz_}P}KxJ28A9Mg0 zna0m z``;g}oHK6weRV9yK8Iq|iKKDQHa&;(sOM9sVY%r)Ab;XY*=?8cW5`Ouk82#v6Isj? zS#YZAdzl1)H zvkCqS2)lsiJ18fYZ{S>`&-?u8j2&wBcc@*t1)*b?egS*d8%IRm!2Z{p*#CO-m{&s-VDmd(CU0cQ<;@Ir5uB?(&gXRaT&ElEyG^w9J%evv`7u{4 zh7AwjC53*?ab~`w$`_h6d^I;&Z3Bm?wy}+Dn;Y#YroVvqrBiSFEyfx!#XM}D`J2GF z;CnkUrz+m3{d4jX&Z9u@KZE=iTKSu2;ltGB$8A3}&*?IZU>J7Fnfzz`ojCVIyOjBD zIywyT~TlCTTt}BT>)LP zp)rtwLi^BSj6b}iB-f$^GEjuUD*@<*m9Q=EL7$rTPt$h$9NNxrM*20=2F`C6qb^z0 zC5yUbQ5R*m+yee&J;SKy+&WSgitDLbwzm;}Ji{95#u+2Z1nRl&%k*5lTdGLURXQl; zgZ+-a;8|EL`Hnu&(T{iZkrxB_b~?-8Jj=Ow{%1|BGx6^Ga6yi!_aimA%CHXlN7{uejo<>8J?~vWd4IRw)YC*> z%3<#o&rOn7&*qpv-+8{uw^crgbohSS^n6*Ij_=1`FXr=L9H*A;t;mzG`uICWf~h>3}cvjtu zR&?bs7GYbD=Ps!7FsI-dCZnze=^5Xm()=^d@{yi-@p&K0&*fM{SHTvA^UWAT+>g!3 zTO2pA1-PW(9G^~l*p}V$> zF>KietUr;C{aW=q``aXehu9{Rn?<>oovWU)t)VWk2N;m)>bopQ%R+y-Xk`Fv+Xt7R z4pnjr`x%JWbr-(liZ({j7i~C8%5O2<1DPMmU4y+Y+N9;^f{=l|HjnQY88f~|(f>;6 z;<~F;&Uavs<+#m%t*Gl4QFqpp^T0LOi>{FG9*2yEHQwxFFTxf>=G;cQIy~wFx&?E> zIuM6lkH@U*3HYC28qyOxeq+nP{7L!BJs#8UXUdQHpJ~Wo>;!96{~(=`pXi%UnD&`5 z>L-7>D3aqh6pS#i0e|3ove=u@LVOS0e?%Oy_>YTz0lg`r-tTDmJdn?j=T(1?{*GgO zd4X}u*h2NrHHJlU_;!!di7v?VOya2XaRgHQ+>OD{8)TO9{e~)9^*NApf8J& zq7q+S!p9wQ8<$Bgbgkr?mP_u)b&^ZmAi1O0OYYnqlB@fYFZ|6b6; zO?FCdd5`2?TO+xjE|lEGt3kU+a_`~ZvsQ8waHrw0ub+Dk>0gF>3+2>(8Z-#I0QYjQ zF%VSI+#i) z59mF8dLW^vlJV5qwQI|zJUW<6rSw?eL4AMnpq}p6V_p4&X?@2|y|+J>sMq@k^}Av{ zX)95GUm~UNMHu2i%luU~vag@tSu}sa;HG$RQ?PN<-o54@g5v{2dk2$W8A|rW50WYX z_HXUKtB-}C8q&P;R=epp#xpXL6Asae_xW<^5)j&TN`ydfgVVeOI^!KotO;v?CVbJ z4WInvhBc`3I=v$~982k2`%>w_p##ajH2v|ldUJ2D-cHgKvO)dtOe%!&jmla1SXuP; z?>ne(Pp0qcAKag+S2?f~1_1d$nr(=vHtg*gOr_C-$yg#mj$vKVpL_NW_4W?N(#bvS zU4%6>uD2nVR5E?Q3TB`54N*`3DX8bxk-ptg@e=lhf(H}dor?+cQy5~T$e+caZgGg*B-OqkxI{psC;xX&m z#cO;Jyn}0^JI*FZc_5|Vtb>Qmi!=}I)Aa_OfJ#Htrlxh9)~Pm-mcMPtJEg{8&w zR=V4)+*9C-o<2L@HsF%fH*;j^$>Df%AgwniVh0-a&n5@^lD!Zr2^KqD_ay1jhSs42 z13DRE@SqL|LKX(7H84H^y!-q1_Us!1o86cIso6?Pd@)bR5{Lv-nDiu5v-s>*Gus^l z=;5BbV`+{`oA;*M)YTswOh6JskR32dgf}dInua1X-hbc#3QXy#p#e&PWJ0=c>`wNA z3-)fhG0}Bn4A8~;;@!y`F<$niZcKu8Zj`k*-mzxS*UQ57p_@Oo>C<2Q(pSG`tndf^ zxMo$|%9~an>a4BSvHY2#xs1f5Ab)Mrqdfyjy{|t#Qw9BCGF@(^-}GtLSuZ0ksdpai zOUH)ww!y*vK|{$>6eWKQANkj;xtVW^*))~)=Ki6+1jx7cp*cMXy*oK<^QFqe4sVb3 z?Mou0d>5pO-pqMI#g|j;;t+z~-16ByZSC!QSSM2y%h!#t-S$1J4}I;c)tf$jbEtF8 zO<(-d9iOVLUwb3#r|-6Y^sj-)!<89xNZ_Kby3K+n7|C?Ko=EPE4fUGy8z%-ed7v-i z`%^;)^dvDTmt850xJ{VvOi`qNaZTb&_=he%m{KyUo-^XDTkb|E_-b~LY8~)`xJ~J( z7w(C&g10V^SgH5N<6u+Fk{o^Tb9_EcJ=nh_v@UP^ueUbW2)56 z5ViVEdSD|m2iytMk1w`CEK~k+e#F@78SL+)piph+cx1SmE-@LZ36odEmTy+PuFx_^ zY@#Q%U*8<-=}jgK;B5}(okQ_Ba)(q$nwD5^e5e<~Jz))UR&x_Ifm^!{rjvw2Zch!t zr3d@Fl5#tktR465)_ptf(~zWd=l(T&Re9*2wO}RHKMMyDG>*jAS_`w>> zNlyQ@9QU>CvMqPpIGIX?4sovc@6`vvq=>QPK!1@O(8){0uNN|oJ+v10VAmb(o2>TT zHQ19*nhFrwOjQGYzb=@Xne*U>nrS0F`(#^BI^7E@i$>ap(-5+;UfpUa=V0cs8S^o(TVlOH zS)^WX*r0bof4i$EK?18iHJOSJ_5i{DK1Exmud#k* zWwsAj6&Gk&pR(In-qIZ#)N2Fr+Bzso!z=Zz`}+DZOu%O9_xvvCwSR!i%|kn181p;@ zH(&nv+~;(elkjifwQZYK9ohDI==7HBDDvB3#n)CVK2$_^2mH({{YA-T{(s_5ec_|G zgQMVPl0J3$_+acYO_cR?ajG;;WW z!qT^`DG~f155$@8nmZ2N$g7g&lqdGYfi#0LkrdYPDa`Zx;Pzt{+8;#!eiDx1pMcu{ zw;m1(ehM0A3Zp#*x)kXUpGJHd@oB`T5uZkU8u4kw$8aCReGK<8+~0}ooeYOQdiS8n zZ9RkOAq?%7{_f-;7fj}4rbARDVi2ge$I@}m=g{tz&e{@f)Z3K)Wv)RsLzz{AexM)9 z+N`K~@-`9Rn$BEF#5vwM1xrVJbClO+h{f&$$#hR#-*IPhaBpw_U67;DcsNxc-LAf& zSc=LgXi+D%;wa9Hc|-=2vHg0K6%tIn@fgHZD;lFmhM;3|t`_t$S2C*n;$UeummFBw z^z2i!oxT&|H#tu@HEogY{d&i?2zVe31(OXk$uAE#$%VvNefI3_fr5u0HQd3$AufNU zyrp^9&Nfa)H|h5JlBxjd^u!Rf;eC1pb56WlZ%smBW;g}n&W`4eT|0}Cne&;nMO#dt zogIiH&8@dJx3;!V7h%(KZeoII+H&y+8WVMa)XGg}WmH9Uou$tF%I(1t@7=$rCn2_s z=hRKA@|~aGsf0cQP(DNF&e7;2Tg6swn#rC0Wa^1(O>Jw6=5z_{t{kWI4y9*AsP$lS z*f?Cze=9$w<`7c_QE_T+?zt&2T%Yde|5Q44ld5Y1>tubNh}+fF9f4YcIZ&-gY6GcS zy?-EynURyMsp&uyWKJkkm1wrAJU#%uT^}6Q_bPRWHjmz(zWsVnO4%T&CzMBHeLe9_ zdi!p@_10#6OKX&|RQKY&$rvU#y(cvq#Hr9fzCk-u+8Vl@MSjCyW5ClPa z`|xM_`xBc7V+WE@(-pIqm9-B?1|b&Wu~b?&13`ByK`9Cn(nVuKSkLk|P1n+H4Oc5j z(J4990&`W{G#%w4wc|uF-7T>$Sa)XSx2q4}Ei;xRnq_TMucF2Wu8iy2+ZF0;KYvSUXF z^r!7R+dA5|-^Os;_ZchX*0$EI%?NLA>u6_u$LFJMyzcDSq3)yMowxHo+Pu?D|M{KB zQQhz46%(sTx1(K!e{R=Sb&Y(!O`0QS9&CY953okFR6k3_ODYwQ3tzR4qYAM}kHivs zi)8{}l=_XGgw6cBu*t){2Um9rwtCAoHg3>6Fn_1O;k5Ut#o^kkRnjKJwe({VW~wCd z-u_hbQ+nE_R)%ueRu!?ej%?{4>V+s%(*meAZx(T7;mbIvVq8&1ZDOydPC zP3_IM>ZWlJ1~F^NE-)xUc~fMVz)~|ybClTF&{Py>&ReX>w5dpF|(l!unb}Y{&O(t! zr=agTm{fHLq}JMh3bQCTFwmE@-OVj;-MR)n8cU^M?#9f7S)_+jmgOP~qt^=)$+ ztZd(^Bktwu15pGYAA5Pu0~IvHO*ON zG&Zc)cWvLgTTf!{Rx>?XYBs+%rBK;P9ea@EjSy#0bg`QNor4YQxid*+HmSovRX_W0 zrIr8s^+B`Gc0vn-|IcTns&z?8;j)}sM&l#@y) zSM}3XwYg{lKTPu{dwVa1i9M9f6_?$- zvt{enKcHw-4fgJ}!v|owq48a{(N>t0)@W96^R}H^IG!mNZcSo=JEx)?=U~SVgSS{l zTwTu0Oo2YnkU{5J<(aa7ei9{L)SNIKU)(LKzV63K{x)pduwm0Df~vnR3q`qe z>&Uv;KdVmmq+nY@R0Zb5VFufm?naE7==y3YI8yz+kU2e;(Hoi0Eo&cS*j-o}_h6Zo z+D{unJP9$C&|9~(M0af7+}3XHA)8W7-`YyuX&T;g*C7OG({y7Hn)GGHG(TN+XQ7->(-quJ8rX4DGCQ%dVAaF zcD3#7FcDM5Vjp_nPzuutg*i6tmBAJQF4@an$NqlIJ$?Jw1{%^akJ56`IIJhI(?g-V z7sg>&Jo?oJrI`tg<1>m3xXsSfOo^Ok|LphW@tr&}riB8$PMY5w;r9=D{^aJOd!Dnv z8I6tRnI0Tzv%fD_l>XB=NvhuY6Lp999#MV|59d1ZUOF?JW#O4FyyK3~t?>Ov?vP~M z_~tRrO(6`=8%0IOGeF^ydOmw3VYm8bln>uUhQ(zRXMBPT=QqpEdURS>^LsaV9tqFM z&3Vo*Glp|HuFx3X1;8^$Zoc;j&+5c9DdV{tzV`sn=4j{ezFGrk*wF4uy!%PLcd!%R zOkPSloI&y*saEf4FzLd0ei7}$`xkkZ=Md-&oPXpQUZQO0U5f7z1ac8|p7EHX(G?BO z)8O4Hy0+T4SlhreG)ItV(i3_d-ywe-XI=4bkO`S|hdN5)O}lu8Pm&WE;W^Qf2^EL? zpt{#i8aSU*D3mmX1ErxK;@z0xAHUMXXN_2|=TPR82xI*{s0&I_;jHJ&h%?(Fe76eT zO`+lW@y^A>#BP&1lZ^A2#qBYy^O>)*J!prb*=V+f&l#}{Jg>T#?P2?E`k&3A$GNSw z=r25bIRCqb?dK2KcdRG-&ps1n_Gk6!A@mK;tg+6;XV;jv61WBEHqP%C7Wn-eKjXsrXDQ?N?(zQkGkC`pKCd$YzHczUZ@G2saTE6w zyVSL7VoY6+9~IF~h`fpZIdPQz(0$)4O~mmxY=X&YZck z>gYiodA^VBB%ibG_PDcgF@j?lqi67bkBsUs!8h*A{=&I^VZ2H z!kMq1OYUcIJoj}5*XQ95ZNwTK*EtoR;yury%?Y1%`~2HDPX;#yHwkwd?iAbv+!)-W zaL3?|!sXyb;f}x^hReVmf*XcQ!wtao!ga$X;5y;%fZGk%0T+ea2Db&S6)sHoU(t5B zDma0A`yXL{fO`(^6xz}MJnLJmY??@^h*tO!GJ`H z3KvzLyVY5=GHnoB>d8TdH@F#|x|27ChkA?UFG-kNMWiXk8rKXKV?n&Xe?QLVAcf)W z9T>F3%VzYRB@5O0Iv&)M(yJ5w2cUYftR>f^?ureV30%HGoUt2-rD273S70kTjU^I( zB_BJG9#TG}y>{B%B^As2(gUf%I~irHx~s>ooKbHXjC=4^u12NYsnp(e)X36U^C8dm zSeIi}jSUlVZLkzbP`Njz_ofFFxws>&GuMs?Z!yDW{*xcr$K(y$k$31AN5|jK&s6;C zgPh5q&VL612LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G z2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G z2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G z2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G2LT5G z2LT5G2LT6x|2_z4Q(EZxl8C=>gA3mfHJbdsW_+B@6$;>5b}_8J!NqTL(xXjX8@i+9 z3$^$Lr}|7Fz6;0Cs5!s?4V4D`8W|COs#319@eUsD#NqG zfa9oKm>mWjM>&dh<-j_Sjl7|Ex`)1Lj$!xI z@{sS}KU(XV`lFD3>4n-0_!c(h=w!neYBBy5Z@8yCsPADv1elU>uUTo0*E8Up&MexH zMH{kc1HMn4$f6Bdv;p7h-j_uivS>pVZOEbxS+pUGHe}I;EZUGo8?tCa7H!C)4Oz4y zi#BA@hAi5UMH{kcLl$kwq77NJA&WL3e^XY!S8)0L`Zq;g>mCy$oWZx|EuApzaw(k< zS8b{+)VpwH;A*+bPZ=yye}AE{-w;{&gh#G=LZtlun&>uHz;}yWEOajQ$Vvm>Cs+ET z-EV&}B4w>|b(0aMFfa4_qt!0ZEDdidL;3nreDB(jOnK-A#_f(Eu5)Q5T8_Bz(n4XS zVMI}iEcCDPE_9WMuJU%tEk<>Cq3e>RlN!54R(b1-;`bZXTk5CdgW_Eul$CI|!0lfz zFDwjgl+pEW`P0Wda^GX6^6keK$Ps)t{Qk$*pdKX%v+F+}R>qclQNNX#$GlIxUnoPn zy#ZoqVnj@~C`{h7;^xDo8JJv__kcOqsl2Q*h`lydj()f$U_`frowiN)L5Y-AuAWA9l~n|M+pPY(CGbyH9{gTCXn^~xuK&HD!~a(S z559%oWQF}_gpniWYui?|Z5MuzTWUz3J)aDEN~ z4gw#JKnAj{0GUg<8aq`M(#uz_7x6!Fm6V0vdtl{yJIbwyCo6%>i z7vm~%&pJN>T05-D3S&F$u;p{Y1Z%4d`dE+Fp^djZ5y9MBD7ZrJ(FU}|aJ>tjV7-_g z{o^<3K6}48M}M}0F_Ee=tidua&T-@&uNUR%}QC&VJ0My=2iAulZb}`E6b-E}P}f=qTluj&d{R zw_6O6ucIwrhK`cBzefMJ67aQRjteUtrBEnGyKj+F;aDgK|K6hdPQo+gusm}h&9MpK{xJAlI&PlQ+P+$W1G8Ef49-u;N2?&Zp^`?`90z>6F%kxudG1+q>K8!fwGI{I{2K$Kja0^GVgloQ|vR= z?#zoC#$VX1==A@Q4EWS%RArDs9JF1T_Y2_;`pfQ>GLi9&$lfuRoPeIn`0>o|3gqLH zIr!na#!MVCST$>*OgJ)HnHkAPe46-hwfn@rz70LtCokp~a?D`8cnwt${166R_q@AG zUZ_0}n&qIWlBc1!KL!1LGH>LdujpfP`=27+kuzdsu-X+_jPa+{-^aXkjsEw{e6{tc zJ9&crgS?>EJ`Mf(Dd^FYsvI5VoI^QvD910)VoflGwZSv9%S76OEP-z23K`yNd402f zx=={f{H_oyeNQ5O;~2*ODY!9_-?CnMr)C@p%MGHpyChYk>Z+q&xv;=8qQW+^uBhh% zYwT-NC9r9n@PAo_>zYr9eX2&A@`cW~`DzS3H{HHN;=%o4>prX*nM#dqyeQg}@5#{` zmpluXsu5S$D(GB3agDF~FRHIZ&`zuup2fOh3hRewX5nFvqo9R-6)>@J|Ma9M6wS)j z?-dR=8FgW)l`$XbVa;e-?P~+igrhFlD2yW_qCuPzXGBO_RY4Qi^x%yj_ zMdZ5%@OT8g)%D~8(J}r7eBi4QX&d?Xpmj-m&A&i?A^w5?%fij@>6(f2Y`$k3h&TE6 zUB%xl;hsziW9mBT>L3rhaNmaek6HH`?gw$d#JYFmz6JN!Soa>>_v8L5>%Ii{x8i<* zbzh461Gslv_g!cg#*bf{)IzH<|D0EKzbCT*oKg1=qJ3P$dcUhq$v8PaHVF)a(&fJ$4s#MPdPT_|(q1Di!D8AU z%|mPW{y{d08);gQmgDn?yovG2d<+>ouE9=|2_05)2jjZ-ljuKPj^D$&>oW21-yqKz z!uG;x2tyzFgNkNcr9D!VmU7sZIh40-A8dM=bC7H0GG0fWkahSkxF;{3E5s4rRTK_B zs3?K10m9urfRP{bQtqYy`-3zrL&x`quo~eA3=b3!a^K`!6^Hjdh zgEt`bMYSVL#dSdt2`66#rKqX_PuyY{r7##mO~S@XCO;;&xu;yGyWaO zG?;*oKO9BdSE_z}x^^Y*$^SL#e&XR(xbMLI3fvcPU5)##xZYshzg_6OzREL+I*E2Y zu%^6XoyJin!@dE0h@VkK{`Q1k4s_e&*vr_>=H2g}(&;@4>$eexGOj;ZyK` z4E_rEPrzRV|6=&Z;r}@NOW^+t_^*Y(68=ZwzYhMT@c$Y7tk-u6or{kg(V7-Y%Ogh- z#=fIIvAdc2glO#N0j(66h*m0X8*GeAsb4^kvhOznmt~mOsu0e(_&ebf{*CC1g%ZI$ zwggx0Z;xf_W>wzF{Ld6$g)yhj@HnyQwRzk-_Fcx2&wbt#wLb6o zcd$nA`Q-bx3+1Ipi1TlzF|Gi{4Zv70!dRchcctQ2y4~wx^hKRaW4%buKEnJKN%hHv zvI1D11%@vH+iGCC;$$W67va7V_mBtm{~PL%@wqJ-P%XJo^{B1eoBdXeeq&i?zp*da zcdT3aeNx8$AQtV-oa5Y(uV){DyqS2XaIccv?-WKRSRVCD5BMG>;fi_fh?Fgq@rg@_ z=Nz!TnR9V?LQ}j_jlR~k@N{3F(atS^OoW^|i}7|IbAUFr1Z6@;m99q$h4$cpgcq}n z|0hV2asLLmRtJ zF2J=4`0LxvHZeWh1Uya>%Wc3C7#?MNDv{Ss;to}be)2bkk)!Vy;^32q{Hv=5g!M+) z#P=}2GH(MsUL`-NF@hPb3guRMzgv6UDi`DFp46#_x|?lAfM5%g+eprL&RU{ z9j6Y;Yu+u9x(iB9=+kn7yvBajrWT+MzW{D;0JpXv`=zWfuK3}d!kb6Q^Udg|cM5Mo zmW>>BOIsz|aH;SHct112Fb(VM64}y0K4hEixVd~;B61trGrkCEOuihM;Qhy~F!Ed-lla~F0woi~&^%L~FaI?}QRUN_86El7L2Jm=E)sgz)O#iZnp5N zo4Hm;J7CZ2a7l$fq1NsKd4qhh)?gT~S6W-yc&K#9hdST+g2wf$Hn**RQB;?6mcQJp z*JU;m#$;E zHSWplYj7>W*rXm^C@cl9oAJDdZeYrEgzX0QuuqTd#vJAW-y&1Y<%|74K--uGeZ36r zU*$y@Y!&V0xbl8A>=q)yk^dQVOoOr6bgi_@VziNTSIYv1VJ*-F9f@OeP-7hHcn;xz zg>=TT7AbsV3D(G|4J>P)RTt{ug>Pt~-`aV@|3UeCit>L;R|7PSU@`!+kME-fi zBjcDu|K%aK{Q9BhZ%dg6bVg3(Yv7NcAT8-iL1Sbnqr!_10arDq^iG8{?|;NHd;=Ks zt^R3x$ZeB;ypHt5jkdExSl{JIUpFaVg&zlSl&uK%*J~+{3}3=p$8b&41x-g2_w`td z`yR6FMG37?@PN-Jma#0(XOE)&^q0uE;*akjj=cCV+Jm_4kL4bvCsd;Tnv8>=Big?M zZ%{Wv8r-+bv(`OqSBuAh-zwjo?8A;R^vOBcu}s@!r-peZYFs#@J%qej#+XcGHF|Qi!|nrKFzW>!nzmHZyfz)CYZ=uq%1#Nr?(E0d2aLZ;GHMjl z-e{Jin_~&}f?XT(9C8MJw%@p5%21ZYy1Zt#3H>LgoYld1=vUT#IqGhV@$8md%e++@ z--9TX>r$)$@@#7UTbsXzZ*xsM1WjYViEtZqDW9$>qk$(;Sj9cX8 zF+=ZEZKd3!E@}8mw5vd)LFZzgh>)}i3PuSvC+la;A zQShH_Q}wGlz#al#;~oe13vB)}HUi@dB~Cr$YTivA?@`Q50U3?R5Hd_gEWiD zKj!>8!(X-JYw!~Jk21=hPuGl6??)XmZytiZ?~h2Qw_qHM)Lp02pbg-W8Qv(dc;m#J zx%DZFH%hdtC9e9KeW<~P%YMfCU)dW=)cxlm1I&9(Aa9_rlQ&HL>6xq!%!~JOs5g0W z9;#4y3GE&SW+x!CO&cZgyac-ud6n`(@FQI*>E%QaHsLYTCZ_q{n?pxh`^Phc1GlJk z%qYfVkoCj5-+!SnGU|uEg)3|>8g#J;`ej7f@L$K(PH*qu#7==`S)>VcqhaL3cE?V+ zLst0ci^!At#ZI|ESACjs3(Mk7u~Q!8-8JehJKTi5U!?Cs-Xo*mc+sSXU+pt+Z-9FV zw*JRCq(VlpZXKxuk4H5nTQff9XXCL1@zhhU#kDxxgR)r0%iw{GL{uH@uy0uPWVxgf z)XB_m1a;Ozo-)?4Wi%skUP03Wnz%*Na{5a76s-2xdD-|~giQZy)I%_S(Z|XzfvfU! zKZkZ`(lVVF{BV_=saoy37dEGG6!ps)`nSNRC(-xh4b_jiLg5wv?+Ry@BcCxF3(}HT z7{_qNlb`JPnSC{LOjl(N*Xo&jYhTA2oAz_^z(wrK+-LD`;RZL>B=IIU!aF}3QGF|8 zZanAHqHKy6v4)SGsz6^iZ1{b_2U_0-tOXx<+wB2uRDP<~?$uB7p5f3`LkwqnJC5Uz z{id%yj6TA8U@bB41m>C39<;@*|9Cwy@<2CW|5VmRnrM$?->Ck={j`7OjNc3Y`$cp< z6&F5jmgx>nu8cPYGWTKKQvINTeQNThT^@BWvpi4e+)CDMLFl!WzreLLv~cAsxZ~%{U`TRA2{q^ivFZ5Ay%Ehz_2j!fgfS_3HdOeyjUB-UVRH>p((pKpOm4$Xs3c7 zwwZCz#G6)Q&ktvGA#X+I+m|kpOeNNN1MQZGkK3F zo*;b~xRqGAu}y6M%y^o!PkjV!)kVI-{d4SD+x?b+zKe4XLF(SLaV&X2%6<=QxbJc? z?0W!vB@c*h^28@WL);2CcrdOG;~6`@2Ho;WR0wPHNTZkj^X6DYx+hsjL7V(K^_$ky zN(Vw6xaXdLEeQG(=GMd9kC`sRTwib!UIL7jZJT@LX1#HpTkpRC&RnM?qs1g5L-2x!e2Jlu6vP?v%~gzdln**;Xv zbiY*&`L%d%bz5uPlod~&CJ(Sr=;zg*_usK>uuRW<7;m4!nr-(SQ~DIgZ}7|1VLFvO z70-A*&fzP0>ISbje%ajDnwfVzp*rk~luAjB9p+wK0o^_llxr)L%ry5AHLP3aKf7}c zu;6&{*NsTX+#`oh{36y)CDXEkdQjt+5BvQ(#x?r(EaYPV{<-bSV7?wk+B9_E0j2wL zj?zNhquSV94Y@Lb^Ax_&nUD{AXQiQ6LpTFquJbg?TF6tZp=b6AqiRo0G|sO-4MjL_ zfuFHYD97;(N(=aD^CT}bvJCVSn=i!E=7isFRx}^I6m9PVki2j`qL zbgm^!n!I;lptrMp z`meMfF~i3$b$*dJu+ZR-QMkd~Qhi8R3Z;=1E@BA6eiGN?2k>gk!n!KKo zH-f)XdpF*IE^h|kDRf4e7wJ9H=CkuM>1X)W%-56~><`w${$>7`3trn_bai1@ru8!$ z*P$*S@rM*_?ey;q*ba{s>D#A6l!wpdnokzZ4!_df&(Bo+>Vuq_pYz{Az(K%4z(K%4 zz(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4 zz(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4 xz(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4z(K%4;DZtPzX74`f3N@m diff --git a/target/linux/ar7-2.4/image/sercomm/dg834 b/target/linux/ar7-2.4/image/sercomm/dg834 deleted file mode 100644 index 61fe336e85b7e2143528eba9026a997b0d4cb7af..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 80 tcmezWzu2|NIo~&z0SH{&EsRY-44lA`!Q2QYX($O|LACz}0?o$%{{aP>5A6T| diff --git a/target/linux/ar7-2.4/image/sercomm/jdr454wb b/target/linux/ar7-2.4/image/sercomm/jdr454wb deleted file mode 100644 index 821ff1c1afbdb456faa42ec9631b757692360adb..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 80 tcmezWzu2|NIo~&z0SG(;EDX#*44lA;!N33}>A(tNLACz}0u{^u{{aTX51;@5 diff --git a/target/linux/ar7-2.4/image/src/LzmaDecode.c b/target/linux/ar7-2.4/image/src/LzmaDecode.c deleted file mode 100644 index 951700bddf..0000000000 --- a/target/linux/ar7-2.4/image/src/LzmaDecode.c +++ /dev/null @@ -1,663 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#ifndef Byte -#define Byte unsigned char -#endif - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -typedef struct _CRangeDecoder -{ - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback; - int Result; - #endif - int ExtraBytes; -} CRangeDecoder; - -Byte RangeDecoderReadByte(CRangeDecoder *rd) -{ - if (rd->Buffer == rd->BufferLim) - { - #ifdef _LZMA_IN_CB - UInt32 size; - rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size); - rd->BufferLim = rd->Buffer + size; - if (size == 0) - #endif - { - rd->ExtraBytes = 1; - return 0xFF; - } - } - return (*rd->Buffer++); -} - -/* #define ReadByte (*rd->Buffer++) */ -#define ReadByte (RangeDecoderReadByte(rd)) - -void RangeDecoderInit(CRangeDecoder *rd, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - Byte *stream, UInt32 bufferSize - #endif - ) -{ - int i; - #ifdef _LZMA_IN_CB - rd->InCallback = inCallback; - rd->Buffer = rd->BufferLim = 0; - #else - rd->Buffer = stream; - rd->BufferLim = stream + bufferSize; - #endif - rd->ExtraBytes = 0; - rd->Code = 0; - rd->Range = (0xFFFFFFFF); - for(i = 0; i < 5; i++) - rd->Code = (rd->Code << 8) | ReadByte; -} - -#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code; -#define RC_FLUSH_VAR rd->Range = range; rd->Code = code; -#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; } - -UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits) -{ - RC_INIT_VAR - UInt32 result = 0; - int i; - for (i = numTotalBits; i > 0; i--) - { - /* UInt32 t; */ - range >>= 1; - - result <<= 1; - if (code >= range) - { - code -= range; - result |= 1; - } - /* - t = (code - range) >> 31; - t &= 1; - code -= range & (t - 1); - result = (result + result) | (1 - t); - */ - RC_NORMALIZE - } - RC_FLUSH_VAR - return result; -} - -int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd) -{ - UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob; - if (rd->Code < bound) - { - rd->Range = bound; - *prob += (kBitModelTotal - *prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 0; - } - else - { - rd->Range -= bound; - rd->Code -= bound; - *prob -= (*prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 1; - } -} - -#define RC_GET_BIT2(prob, mi, A0, A1) \ - UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \ - if (code < bound) \ - { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \ - else \ - { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \ - RC_NORMALIZE - -#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;) - -int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = numLevels; i > 0; i--) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT(prob, mi) - #else - mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return mi - (1 << numLevels); -} - -int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - int symbol = 0; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = 0; i < numLevels; i++) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i)) - #else - int bit = RangeDecoderBitDecode(probs + mi, rd); - mi = mi + mi + bit; - symbol |= (bit << i); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - int bit; - int matchBit = (matchByte >> 7) & 1; - matchByte <<= 1; - #ifdef _LZMA_LOC_OPT - { - CProb *prob = probs + ((1 + matchBit) << 8) + symbol; - RC_GET_BIT2(prob, symbol, bit = 0, bit = 1) - } - #else - bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd); - symbol = (symbol << 1) | bit; - #endif - if (matchBit != bit) - { - while (symbol < 0x100) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - break; - } - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - -int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState) -{ - if(RangeDecoderBitDecode(p + LenChoice, rd) == 0) - return RangeDecoderBitTreeDecode(p + LenLow + - (posState << kLenNumLowBits), kLenNumLowBits, rd); - if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0) - return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid + - (posState << kLenNumMidBits), kLenNumMidBits, rd); - return kLenNumLowSymbols + kLenNumMidSymbols + - RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd); -} - -#define kNumStates 12 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -#ifdef _LZMA_OUT_READ - -typedef struct _LzmaVarState -{ - CRangeDecoder RangeDecoder; - Byte *Dictionary; - UInt32 DictionarySize; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 Reps[4]; - int lc; - int lp; - int pb; - int State; - int PreviousIsMatch; - int RemainLen; -} LzmaVarState; - -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif - ) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - UInt32 i; - if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - vs->Dictionary = dictionary; - vs->DictionarySize = dictionarySize; - vs->DictionaryPos = 0; - vs->GlobalPos = 0; - vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; - vs->lc = lc; - vs->lp = lp; - vs->pb = pb; - vs->State = 0; - vs->PreviousIsMatch = 0; - vs->RemainLen = 0; - dictionary[dictionarySize - 1] = 0; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&vs->RangeDecoder, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); - return LZMA_RESULT_OK; -} - -int LzmaDecode(unsigned char *buffer, - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - CRangeDecoder rd = vs->RangeDecoder; - int state = vs->State; - int previousIsMatch = vs->PreviousIsMatch; - Byte previousByte; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << (vs->pb)) - 1; - UInt32 literalPosMask = (1 << (vs->lp)) - 1; - int lc = vs->lc; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - if (len == -1) - { - *outSizeProcessed = 0; - return LZMA_RESULT_OK; - } - - while(len > 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; -#else - -int LzmaDecode( - Byte *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - CProb *p = (CProb *)buffer; - CRangeDecoder rd; - UInt32 i; - int state = 0; - int previousIsMatch = 0; - Byte previousByte = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << pb) - 1; - UInt32 literalPosMask = (1 << lp) - 1; - int len = 0; - if (bufferSize < numProbs * sizeof(CProb)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&rd, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); -#endif - - *outSizeProcessed = 0; - while(nowPos < outSize) - { - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - #ifdef _LZMA_IN_CB - if (rd.Result != LZMA_RESULT_OK) - return rd.Result; - #endif - if (rd.ExtraBytes != 0) - return LZMA_RESULT_DATA_ERROR; - if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - CProb *probs = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - if (previousIsMatch) - { - Byte matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte); - previousIsMatch = 0; - } - else - previousByte = LzmaLiteralDecode(probs, &rd); - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - } - else - { - previousIsMatch = 1; - if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1) - { - if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0) - { - if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - if ( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - == 0) - return LZMA_RESULT_DATA_ERROR; - state = state < 7 ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - continue; - } - } - else - { - UInt32 distance; - if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0) - distance = rep1; - else - { - if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0) - distance = rep2; - else - { - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - len = LzmaLenDecode(p + RepLenCoder, &rd, posState); - state = state < 7 ? 8 : 11; - } - else - { - int posSlot; - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < 7 ? 7 : 10; - len = LzmaLenDecode(p + LenCoder, &rd, posState); - posSlot = RangeDecoderBitTreeDecode(p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits), kNumPosSlotBits, &rd); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits); - if (posSlot < kEndPosModelIndex) - { - rep0 += RangeDecoderReverseBitTreeDecode( - p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd); - } - else - { - rep0 += RangeDecoderDecodeDirectBits(&rd, - numDirectBits - kNumAlignBits) << kNumAlignBits; - rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd); - } - } - else - rep0 = posSlot; - rep0++; - } - if (rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = -1; - break; - } - if (rep0 > nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - { - return LZMA_RESULT_DATA_ERROR; - } - len += kMatchMinLen; - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - len--; - } - while(len > 0 && nowPos < outSize); - } - } - - #ifdef _LZMA_OUT_READ - vs->RangeDecoder = rd; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + nowPos; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->PreviousIsMatch = previousIsMatch; - vs->RemainLen = len; - #endif - - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/linux/ar7-2.4/image/src/LzmaDecode.h b/target/linux/ar7-2.4/image/src/LzmaDecode.h deleted file mode 100644 index f58944e3c3..0000000000 --- a/target/linux/ar7-2.4/image/src/LzmaDecode.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifndef UInt32 -#ifdef _LZMA_UINT32_IS_ULONG -#define UInt32 unsigned long -#else -#define UInt32 unsigned int -#endif -#endif - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb unsigned short -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 -#define LZMA_RESULT_NOT_ENOUGH_MEM 2 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -/* -bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) -bufferSize += 100 in case of _LZMA_OUT_READ -by default CProb is unsigned short, -but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) -*/ - -#ifdef _LZMA_OUT_READ -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif -); -#endif - -int LzmaDecode( - unsigned char *buffer, - #ifndef _LZMA_OUT_READ - UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed); - -#endif diff --git a/target/linux/ar7-2.4/image/src/gzip.h b/target/linux/ar7-2.4/image/src/gzip.h deleted file mode 100644 index 917e66655c..0000000000 --- a/target/linux/ar7-2.4/image/src/gzip.h +++ /dev/null @@ -1,51 +0,0 @@ -//bvb#include "timemmap.h" - -#define OF(args) args -#define STATIC static - -#define WSIZE 0x8000 /* Slideing window size (defined as var - * "window" below) must be at least 32k, - * and a power of two. This is the - * data work window used for input buffer - * by the input routine */ - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - - -static char *output_data; -static ulg output_ptr; - -#ifndef NULL -#define NULL 0 -#endif - -#define NOMEMCPY /* Does routine memcpy exist? */ - -//bvb static uch *inbuf; /* input buffer */ -static uch *window; - -//bvb static uch outwin[WSIZE]; - -//bvb static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to process in inbuf */ - -static unsigned outcnt; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */ -#define BMAX 16 /* maximum bit length of any code (16 for explode) */ -#define N_MAX 288 /* maximum number of codes in any set */ - -static char *input_data; - -static void *freememstart; diff --git a/target/linux/ar7-2.4/image/src/ld.script.in b/target/linux/ar7-2.4/image/src/ld.script.in deleted file mode 100644 index 40389e644f..0000000000 --- a/target/linux/ar7-2.4/image/src/ld.script.in +++ /dev/null @@ -1,34 +0,0 @@ - OUTPUT_FORMAT("@@OUTPUT_FORMAT@@") - OUTPUT_ARCH(mips) -ENTRY(tikernelunzip) - SECTIONS -{ - - /* Allocate memory space on top of kernel bss space */ - . = 0x94200000; - .text : - { - *(.text) - *(.rodata) - *(.rodata1) - *(.gnu.warning) - *(.text.init) - *(.data.init) - } - - .data : - { - *(*) - } - - .bss : - { - *(.dynbss) - *(COMMON) - *(.bss) - *(.sbss) - *(.scommon) - . = ALIGN (0x8000); - workspace = .; - } -} diff --git a/target/linux/ar7-2.4/image/src/loader.c b/target/linux/ar7-2.4/image/src/loader.c deleted file mode 100644 index 22b909d7e9..0000000000 --- a/target/linux/ar7-2.4/image/src/loader.c +++ /dev/null @@ -1,140 +0,0 @@ -/* inflate.c -- Not copyrighted 1992 by Mark Adler - version c10p1, 10 January 1993 */ - -/* - * Adapted for booting Linux by Hannu Savolainen 1993 - * based on gzip-1.0.3 - * - * Nicolas Pitre , 1999/04/14 : - * Little mods for all variable to reside either into rodata or bss segments - * by marking constant variables with 'const' and initializing all the others - * at run-time only. This allows for the kernel uncompressor to run - * directly from Flash or ROM memory on embeded systems. - */ - -#include -#include "gzip.h" -#include "LzmaDecode.h" - -/* Function prototypes */ -unsigned char get_byte(void); -int tikernelunzip(int,char *[], char *[]); -static int tidecompress(uch *, uch *); - -void kernel_entry(int, char *[], char *[]); -void (*ke)(int, char *[], char *[]); /* Gen reference to kernel function */ -void (*prnt)(unsigned int, char *); /* Gen reference to Yamon print function */ -void printf(char *ptr); /* Generate our own printf */ - -int tikernelunzip(int argc, char *argv[], char *arge[]) -{ - extern unsigned int _ftext; - extern uch kernelimage[]; - uch *in, *out; - int status; - - printf("Launching kernel decompressor.\n"); - - out = (unsigned char *) LOADADDR; - in = &(kernelimage[0]); - - status = tidecompress(in, out); - - if (status == 0) { - printf("Kernel decompressor was successful ... launching kernel.\n"); - - ke = ( void(*)(int, char *[],char*[]))kernel_entry; - (*ke)(argc,argv,arge); - - return (0); - } else { - printf("Error in decompression.\n"); - return(1); - } -} - -#if 0 -char hex[] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'}; -void print_i(int i) -{ - int j; - char buf[11]; - - buf[0] = '0'; - buf[1] = 'x'; - buf[10] = 0; - - for (j = 0; j < 8; j++) - { - buf[2 + 7 - j] = hex[i & 0xf]; - i = i >> 4; - } - - printf(buf); -} -#endif - -int tidecompress(uch *indata, uch *outdata) -{ - extern unsigned int workspace; - extern unsigned char kernelimage[], kernelimage_end[]; - unsigned int i; /* temp value */ - unsigned int lc; /* literal context bits */ - unsigned int lp; /* literal pos state bits */ - unsigned int pb; /* pos state bits */ - unsigned int osize; /* uncompressed size */ - unsigned int wsize; /* window size */ - unsigned int insize = kernelimage_end - kernelimage; - int status; - - output_ptr = 0; - output_data = outdata; - input_data = indata; - - /* lzma args */ - i = get_byte(); - lc = i % 9, i = i / 9; - lp = i % 5, pb = i / 5; - - /* skip rest of the LZMA coder property */ - for (i = 0; i < 4; i++) - get_byte(); - - /* read the lower half of uncompressed size in the header */ - osize = ((unsigned int)get_byte()) + - ((unsigned int)get_byte() << 8) + - ((unsigned int)get_byte() << 16) + - ((unsigned int)get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - get_byte(); - - i = 0; - wsize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb); - - if ((status = LzmaDecode((unsigned char *) &workspace, wsize, lc, lp, pb, - indata + 13, insize - 13, (unsigned char *) output_data, osize, &i)) == LZMA_RESULT_OK) - return 0; - - return status; -} - - -void printf(char *ptr) -{ - unsigned int *tempptr = (unsigned int *)0x90000534; - prnt = ( void (*)(unsigned int, char *)) *tempptr; - (*prnt)(0,ptr); -} - -unsigned char get_byte() -{ - unsigned char c; - - c = *input_data; - input_data++; - - return c; -} - diff --git a/target/linux/ar7-2.4/image/src/srec2bin.c b/target/linux/ar7-2.4/image/src/srec2bin.c deleted file mode 100644 index 0eb8b2023a..0000000000 --- a/target/linux/ar7-2.4/image/src/srec2bin.c +++ /dev/null @@ -1,523 +0,0 @@ -#include -#include - -//Rev 0.1 Original -// 8 Jan 2001 MJH Added code to write data to Binary file -// note: outputfile is name.bin, where name is first part -// of input file. ie tmp.rec -> tmp.bin -// -// srec2bin -// -// TAG -// bit32u TAG_BIG = 0xDEADBE42; -// bit32u TAG_LITTLE = 0xFEEDFA42; -// -// File Structure -// -// TAG : 32 Bits -// [DATA RECORDS] -// -// Data Records Structure -// -// LENGTH : 32 Bits <- Length of DATA, excludes ADDRESS and CHECKSUM -// ADDRESS : 32 Bits -// DATA : 8 Bits * LENGTH -// CHECKSUM: 32 Bits <- 0 - (Sum of Length --> End of Data) -// -// Note : If Length == 0, Address will be Program Start -// -// -// -// -// - -#define MajRevNum 0 -#define MinRevNum 2 - - -#define EndianSwitch(x) ((x >> 24) | (x << 24) | ((x << 8) & (0x00FF0000)) | ((x >> 8) & (0x0000FF00)) ) - -typedef unsigned char bit8u; -typedef unsigned int bit32u; -typedef int bit32; - -#define FALSE 0 -#define TRUE (!FALSE) - - -bit32u CheckSum; -int RecStart; -int debug; -int verbose; - -FILE *OpenOutputFile( char *Name ); -FILE *fOut; -bit32u RecLength=0; - -bit32u AddressCurrent; - -bit32u gh(char *cp,int nibs); - -int BigEndian; - -int inputline; - -// char buf[16*1024]; - -char buffer[2048]; -char *cur_ptr; -int cur_line=0; -int cur_len=0; - -int s1s2s3_total=0; - -bit32u PBVal; -int PBValid; -bit32u PBAdr; - - -void dumpfTell(char *s, bit32u Value) -{ - int Length; - Length = (int) RecLength; - if (debug) - printf("[%s ] ftell()[0x%08lX] Length[0x%4X] Length[%4d] Value[0x%08x]\n", - s, ftell(fOut), Length, Length, Value); -} - -void DispHex(bit32u Hex) -{ -// printf("%X", Hex); -} - -void WaitDisplay(void) -{ - static int Count=0; - static int Index=0; - char iline[]={"-\\|/"}; - - Count++; - if ((Count % 32)==0) - { - if (verbose) - printf("%c%c",iline[Index++],8); - Index &= 3; - } -} - - -void binOut32 ( bit32u Data ) -{ -// On UNIX machine all 32bit writes need ENDIAN switched -// Data = EndianSwitch(Data); -// fwrite( &Data, sizeof(bit32u), 1, fOut); - - char sdat[4]; - int i; - - for(i=0;i<4;i++) - sdat[i]=(char)(Data>>(i*8)); - fwrite( sdat, 1, 4, fOut); - dumpfTell("Out32" , Data); -} - -// Only update RecLength on Byte Writes -// All 32 bit writes will be for Length etc - -void binOut8 ( bit8u Data ) -{ - int n; - dumpfTell("B4Data" , (bit32u) (Data & 0xFF) ); - n = fwrite( &Data, sizeof(bit8u), 1, fOut); - if (n != 1) - printf("Error in writing %X for Address 0x%8X\n", Data, AddressCurrent); - RecLength += 1; -} - -// Currently ONLY used for outputting Program Start - -void binRecStart(bit32u Address) -{ - RecLength = 0; - CheckSum = Address; - RecStart = TRUE; - - if (debug) - printf("[RecStart] CheckSum[0x%08X] Length[%4d] Address[0x%08X]\n", - CheckSum, RecLength, Address); - - - dumpfTell("RecLength", RecLength); - binOut32( RecLength ); - dumpfTell("Address", Address); - binOut32( Address ); -} - -void binRecEnd(void) -{ - long RecEnd; - - if (!RecStart) // if no record started, do not end it - { - return; - } - - RecStart = FALSE; - - - RecEnd = ftell(fOut); // Save Current position - - if (debug) - printf("[RecEnd ] CheckSum[0x%08X] Length[%4d] Length[0x%X] RecEnd[0x%08lX]\n", - CheckSum, RecLength, RecLength, RecEnd); - - fseek( fOut, -((long) RecLength), SEEK_CUR); // move back Start Of Data - - dumpfTell("Data ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Address - - dumpfTell("Address ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Length - - dumpfTell("Length ", -1); - - binOut32( RecLength ); - - fseek( fOut, RecEnd, SEEK_SET); // move to end of Record - - CheckSum += RecLength; - - CheckSum = ~CheckSum + 1; // Two's complement - - binOut32( CheckSum ); - - if (verbose) - printf("[Created Record of %d Bytes with CheckSum [0x%8X]\n", RecLength, CheckSum); -} - -void binRecOutProgramStart(bit32u Address) -{ - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; -} -void binRecOutByte(bit32u Address, bit8u Data) -{ - // If Address is one after Current Address, output Byte - // If not, close out last record, update Length, write checksum - // Then Start New Record, updating Current Address - - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; - CheckSum += Data; - binOut8( Data ); -} - -//============================================================================= -// SUPPORT FUNCTIONS -//============================================================================= -int readline(FILE *fil,char *buf,int len) -{ - int rlen; - - rlen=0; - if (len==0) return(0); - while(1) - { - if (cur_len==0) - { - cur_len=fread(buffer, 1, sizeof(buffer), fil); - if (cur_len==0) - { - if (rlen) - { - *buf=0; - return(rlen); - } - return(-1); - } - cur_ptr=buffer; - } - if (cur_len) - { - if (*cur_ptr=='\n') - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - else - { - if ((len>1)&&(*cur_ptr!='\r')) - { - *buf++=*cur_ptr++; - len--; - } - else - cur_ptr++; - - rlen++; - cur_len--; - } - } - else - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - } -} - - -int SRLerrorout(char *c1,char *c2) -{ - printf("\nERROR: %s - '%s'.",c1,c2); - return(FALSE); -} - - -int checksum(char *cp,int count) -{ - char *scp; - int cksum; - int dum; - - scp=cp; - while(*scp) - { - if (!isxdigit(*scp++)) - return(SRLerrorout("Invalid hex digits",cp)); - } - scp=cp; - - cksum=count; - - while(count) - { - cksum += gh(scp,2); - if (count == 2) - dum = ~cksum; - scp += 2; - count--; - } - cksum&=0x0ff; - // printf("\nCk:%02x",cksum); - return(cksum==0x0ff); -} - -bit32u gh(char *cp,int nibs) -{ - int i; - bit32u j; - - j=0; - - for(i=0;i='a')&&(*cp<='z')) *cp &= 0x5f; - if ((*cp>='0')&&(*cp<='9')) - j += (*cp-0x30); - else - if ((*cp>='A')&&(*cp<='F')) - j += (*cp-0x37); - else - SRLerrorout("Bad Hex char", cp); - cp++; - } - return(j); -} - - -//============================================================================= -// PROCESS SREC LINE -//============================================================================= - -int srecLine(char *pSrecLine) -{ - char *scp,ch; - int itmp,count,dat; - bit32u adr; - static bit32u RecordCounter=0; - - cur_line++; - scp=pSrecLine; - - if (*pSrecLine!='S') - return(SRLerrorout("Not an Srecord file",scp)); - pSrecLine++; - if (strlen(pSrecLine)<4) - return(SRLerrorout("Srecord too short",scp)); - - ch=*pSrecLine++; - - count=gh(pSrecLine,2); - - pSrecLine += 2; - - // if(debug) - // printf("count %d, strlen(pSrecLine) = %d, pSrecLine =[%s]\n", count, strlen(pSrecLine), pSrecLine); - RecordCounter++; - DispHex(RecordCounter); - - if ((count*2) != strlen(pSrecLine)) return(SRLerrorout("Count field larger than record",scp)); - - if (!checksum(pSrecLine, count)) return(SRLerrorout("Bad Checksum",scp)); - - switch(ch) - { - case '0': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp) return(SRLerrorout("Srecord 1 address not zero",scp)); - break; - case '1': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '2': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '3': if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - count--; - while(count) - { - dat=gh(pSrecLine,2); pSrecLine+=2; count--; - binRecOutByte(adr, (char) (dat & 0xFF)); - adr++; - } - s1s2s3_total++; - break; - case '4': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '5': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp|=s1s2s3_total) return(SRLerrorout("Incorrect number of S3 Record processed",scp)); - break; - case '6': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '7': // PROGRAM START - if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - if (count!=1) return(SRLerrorout("Invalid Srecord count field",scp)); - binRecOutProgramStart(adr); - break; - case '8': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '9': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - default: - break; - } - return(TRUE); -} - - -//============================================================================= -// MAIN LOGIC, READS IN LINE AND OUTPUTS BINARY -//============================================================================= - -int srec2bin(int argc,char *argv[],int verbose) -{ - int i,rlen,sts; - FILE *fp; - char ac; - char buff[256]; - bit32u TAG_BIG = 0xDEADBE42; - bit32u TAG_LITTLE = 0xFEEDFA42; - - bit32u Tag; - - - if(argc < 3) - { - printf("\nError: \n\n"); - return(0); - } - - if (argc > 3) BigEndian=TRUE; else BigEndian=FALSE; - - if (BigEndian) - Tag = TAG_BIG; - else - Tag = TAG_LITTLE; - - if (verbose) - printf("\nEndian: %s, Tag is 0x%8X\n",(BigEndian)?"BIG":"LITTLE", Tag); - - fp = fopen(argv[1],"rt"); - - if (fp==NULL) - { - printf("\nError: Opening input file, %s.", argv[1]); - return(0); - } - - fOut = fopen( argv[2], "wb"); - - if (fOut==NULL) - { - printf("\nError: Opening Output file, %s.", argv[2]); - if(fp) fclose(fp); - return(0); - } - - RecStart = FALSE; - - AddressCurrent = 0xFFFFFFFFL; - - // Setup Tag - - dumpfTell("Tag", Tag); - - binOut32(Tag); - - - inputline=0; - sts=TRUE; - - rlen = readline(fp,buff,sizeof buff); - - while( (sts) && (rlen != -1)) - { - if (strlen(buff)) - { - sts &= srecLine(buff); - WaitDisplay(); - } - rlen = readline(fp,buff,sizeof buff); - } - - - // printf("PC: 0x%08X, Length 0x%08X, Tag 0x%08X\n", ProgramStart, RecLength, TAG_LITTLE); - - binRecEnd(); - - if(fp) fclose(fp); - if(fOut) fclose(fOut); - - return(1); -} - -main(int argc, char *argv[]) -{ - debug = TRUE; - debug = FALSE; - verbose = FALSE; - srec2bin(argc,argv,verbose); - return 0; -} - diff --git a/target/linux/ar7-2.4/image/src/zimage.script.in b/target/linux/ar7-2.4/image/src/zimage.script.in deleted file mode 100644 index 1a0865b086..0000000000 --- a/target/linux/ar7-2.4/image/src/zimage.script.in +++ /dev/null @@ -1,11 +0,0 @@ - OUTPUT_FORMAT("@@OUTPUT_FORMAT@@") -OUTPUT_ARCH(mips) - SECTIONS -{ - .data : - { - kernelimage = .; - *(.data) - kernelimage_end = .; - } -} diff --git a/target/linux/ar7-2.4/patches/000-ar7_support.patch b/target/linux/ar7-2.4/patches/000-ar7_support.patch deleted file mode 100644 index 0c9c0d3028..0000000000 --- a/target/linux/ar7-2.4/patches/000-ar7_support.patch +++ /dev/null @@ -1,9549 +0,0 @@ -diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile ---- linux.old/arch/mips/Makefile 2005-10-21 16:43:16.316951500 +0200 -+++ linux.dev/arch/mips/Makefile 2005-11-10 01:10:45.775570250 +0100 -@@ -369,6 +369,16 @@ - endif - - # -+# Texas Instruments AR7 -+# -+ -+ifdef CONFIG_AR7 -+LIBS += arch/mips/ar7/ar7.o -+SUBDIRS += arch/mips/ar7 -+LOADADDR += 0x94020000 -+endif -+ -+# - # DECstation family - # - ifdef CONFIG_DECSTATION -diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile ---- linux.old/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/Makefile 2005-11-10 01:13:51.443173750 +0100 -@@ -0,0 +1,14 @@ -+.S.s: -+ $(CPP) $(AFLAGS) $< -o $*.s -+ -+.S.o: -+ $(CC) $(AFLAGS) -c $< -o $*.o -+ -+EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_ -+O_TARGET := ar7.o -+ -+obj-y := tnetd73xx_misc.o misc.o -+export-objs := misc.o irq.o init.o -+obj-y += setup.o irq.o int-handler.o reset.o init.o psp_env.o memory.o promlib.o cmdline.o -+ -+include $(TOPDIR)/Rules.make -diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c ---- linux.old/arch/mips/ar7/cmdline.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/cmdline.c 2005-11-10 01:14:16.372731750 +0100 -@@ -0,0 +1,88 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * Kernel command line creation using the prom monitor (YAMON) argc/argv. -+ */ -+#include -+#include -+ -+#include -+ -+extern int prom_argc; -+extern int *_prom_argv; -+ -+/* -+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. -+ * This macro take care of sign extension. -+ */ -+#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)])) -+ -+char arcs_cmdline[CL_SIZE]; -+#ifdef CONFIG_CMDLINE_BOOL -+char __initdata cfg_cmdline[] = CONFIG_CMDLINE; -+#endif -+ -+char * __init prom_getcmdline(void) -+{ -+ return &(arcs_cmdline[0]); -+} -+ -+ -+void __init prom_init_cmdline(void) -+{ -+ char *cp, *end; -+ int actr; -+ char *env_cmdline = prom_getenv("kernel_args"); -+ size_t len; -+ -+ actr = 1; /* Always ignore argv[0] */ -+ -+ cp = end = &(arcs_cmdline[0]); -+ end += sizeof(arcs_cmdline); -+ -+ if (env_cmdline) { -+ len = strlen(env_cmdline); -+ if (len > end - cp - 1) -+ len = end - cp - 1; -+ strncpy(cp, env_cmdline, len); -+ cp += len; -+ *cp++ = ' '; -+ } -+#ifdef CONFIG_CMDLINE_BOOL -+ else { -+ len = strlen(cfg_cmdline); -+ if (len > end - cp - 1) -+ len = end - cp - 1; -+ strncpy(cp, cfg_cmdline, len); -+ cp += len; -+ *cp++ = ' '; -+ } -+#endif -+ -+ while(actr < prom_argc) { -+ len = strlen(prom_argv(actr)); -+ if (len > end - cp - 1) -+ break; -+ strncpy(cp, prom_argv(actr), len); -+ cp += len; -+ *cp++ = ' '; -+ actr++; -+ } -+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ -+ --cp; -+ *cp = '\0'; -+} -diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c ---- linux.old/arch/mips/ar7/init.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/init.c 2005-11-10 01:10:45.795571500 +0100 -@@ -0,0 +1,199 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * PROM library initialisation code. -+ */ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+ -+int prom_argc; -+int *_prom_argv, *_prom_envp; -+ -+/* max # of Adam2 environment variables */ -+#define MAX_ENV_ENTRY 80 -+ -+static t_env_var local_envp[MAX_ENV_ENTRY]; -+static int env_type = 0; -+int init_debug = 0; -+ -+unsigned int max_env_entry; -+ -+extern char *prom_psp_getenv(char *envname); -+ -+static inline char *prom_adam2_getenv(char *envname) -+{ -+ /* -+ * Return a pointer to the given environment variable. -+ * In 64-bit mode: we're using 64-bit pointers, but all pointers -+ * in the PROM structures are only 32-bit, so we need some -+ * workarounds, if we are running in 64-bit mode. -+ */ -+ int i; -+ t_env_var *env = (t_env_var *) local_envp; -+ -+ if (strcmp("bootloader", envname) == 0) -+ return "Adam2"; -+ -+ i = strlen(envname); -+ while (env->name) { -+ if(strncmp(envname, env->name, i) == 0) { -+ return(env->val); -+ } -+ env++; -+ } -+ -+ return NULL; -+} -+ -+/* XXX "bootloader" won't be returned. -+ * Better make it an element of local_envp */ -+static inline t_env_var * -+prom_adam2_iterenv(t_env_var *env) { -+ if (!env) -+ env = local_envp; -+ else -+ env++; -+ if (env - local_envp > MAX_ENV_ENTRY || !env->name) -+ return 0; -+ return env; -+} -+ -+char *prom_getenv(char *envname) -+{ -+ if (env_type == 1) -+ return prom_psp_getenv(envname); -+ else -+ return prom_adam2_getenv(envname); -+} -+ -+t_env_var * -+prom_iterenv(t_env_var *last) -+{ -+ if (env_type == 1) -+ return 0; /* not yet implemented */ -+ return prom_adam2_iterenv(last); -+} -+ -+static inline unsigned char str2hexnum(unsigned char c) -+{ -+ if (c >= '0' && c <= '9') -+ return c - '0'; -+ if (c >= 'a' && c <= 'f') -+ return c - 'a' + 10; -+ return 0; /* foo */ -+} -+ -+static inline void str2eaddr(unsigned char *ea, unsigned char *str) -+{ -+ int i; -+ -+ for (i = 0; i < 6; i++) { -+ unsigned char num; -+ -+ if((*str == '.') || (*str == ':')) -+ str++; -+ num = str2hexnum(*str++) << 4; -+ num |= (str2hexnum(*str++)); -+ ea[i] = num; -+ } -+} -+ -+int get_ethernet_addr(char *ethernet_addr) -+{ -+ char *ethaddr_str; -+ -+ ethaddr_str = prom_getenv("ethaddr"); -+ if (!ethaddr_str) { -+ printk("ethaddr not set in boot prom\n"); -+ return -1; -+ } -+ str2eaddr(ethernet_addr, ethaddr_str); -+ -+ if (init_debug > 1) { -+ int i; -+ printk("get_ethernet_addr: "); -+ for (i=0; i<5; i++) -+ printk("%02x:", (unsigned char)*(ethernet_addr+i)); -+ printk("%02x\n", *(ethernet_addr+i)); -+ } -+ -+ return 0; -+} -+ -+struct psbl_rec { -+ unsigned int psbl_size; -+ unsigned int env_base; -+ unsigned int env_size; -+ unsigned int ffs_base; -+ unsigned int ffs_size; -+}; -+ -+static const char psp_env_version[] = "TIENV0.8"; -+ -+int __init prom_init(int argc, char **argv, char **envp) -+{ -+ int i; -+ -+ t_env_var *env = (t_env_var *) envp; -+ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x94000300)); -+ void *psp_env = (void *)KSEG1ADDR(psbl->env_base); -+ -+ prom_argc = argc; -+ _prom_argv = (int *)argv; -+ _prom_envp = (int *)envp; -+ -+ if(strcmp(psp_env, psp_env_version) == 0) { -+ /* PSPBOOT */ -+ -+ env_type = 1; -+ _prom_envp = psp_env; -+ max_env_entry = (psbl->env_size / 16) - 1; -+ } else { -+ /* Copy what we need locally so we are not dependent on -+ * bootloader RAM. In Adam2, the environment parameters -+ * are in flash but the table that references them is in -+ * RAM -+ */ -+ -+ for(i=0; i < MAX_ENV_ENTRY; i++, env++) { -+ if (env->name) { -+ local_envp[i].name = env->name; -+ local_envp[i].val = env->val; -+ } else { -+ local_envp[i].name = NULL; -+ local_envp[i].val = NULL; -+ } -+ } -+ } -+ -+ set_io_port_base(0); -+ -+ prom_printf("\nLINUX started...\n"); -+ prom_init_cmdline(); -+ prom_meminit(); -+ -+ return 0; -+} -diff -urN linux.old/arch/mips/ar7/int-handler.S linux.dev/arch/mips/ar7/int-handler.S ---- linux.old/arch/mips/ar7/int-handler.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/int-handler.S 2005-11-10 01:12:43.938955000 +0100 -@@ -0,0 +1,63 @@ -+/* -+ * Copyright 2004 PMC-Sierra Inc. -+ * Author: Manish Lachwani (lachwani@pmc-sierra.com) -+ * Adaption for AR7: Enrik Berkhan -+ * -+ * First-level interrupt dispatcher for the TI AR7 -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+#define __ASSEMBLY__ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * First level interrupt dispatcher for TI AR7 based boards -+ */ -+ -+ .align 5 -+ NESTED(ar7IRQ, PT_SIZE, sp) -+ SAVE_ALL -+ CLI -+ .set at -+ -+ mfc0 t0, CP0_CAUSE -+ mfc0 t2, CP0_STATUS -+ -+ and t0, t2 -+ -+ andi t1, t0, STATUSF_IP2 /* hw0 hardware interrupt */ -+ bnez t1, ll_hw0_irq -+ -+ andi t1, t0, STATUSF_IP7 /* R4k CPU timer */ -+ bnez t1, ll_timer_irq -+ -+ .set reorder -+ -+ /* wrong alarm or masked ... */ -+ j spurious_interrupt -+ nop -+ END(ar7IRQ) -+ -+ .align 5 -+ -+ll_hw0_irq: -+ li a0, 2 -+ move a1, sp -+ jal do_IRQ -+ j ret_from_irq -+ -+ll_timer_irq: -+ li a0, 7 -+ move a1, sp -+ jal do_IRQ -+ j ret_from_irq -+ -+ -diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c ---- linux.old/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/irq.c 2005-11-10 01:12:43.938955000 +0100 -@@ -0,0 +1,427 @@ -+/* -+ * Nitin Dhingra, iamnd@ti.com -+ * Copyright (C) 2002 Texas Instruments, Inc. All rights reserved. -+ * -+ * ######################################################################## -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * ######################################################################## -+ * -+ * Routines for generic manipulation of the interrupts found on the Texas -+ * Instruments avalanche board -+ * -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#define shutdown_avalanche_irq disable_avalanche_irq -+#define mask_and_ack_avalanche_irq disable_avalanche_irq -+ -+static unsigned int startup_avalanche_irq(unsigned int irq); -+static void end_avalanche_irq(unsigned int irq); -+void enable_avalanche_irq(unsigned int irq_nr); -+void disable_avalanche_irq(unsigned int irq_nr); -+void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs); -+ -+static struct hw_interrupt_type avalanche_irq_type = { -+ "AR7", -+ startup_avalanche_irq, -+ shutdown_avalanche_irq, -+ enable_avalanche_irq, -+ disable_avalanche_irq, -+ mask_and_ack_avalanche_irq, -+ end_avalanche_irq, -+ NULL -+}; -+ -+static int ar7_irq_base; -+ -+static struct irqaction ar7_hw0_action = { -+ ar7_hw0_interrupt, 0, 0, "AR7 on hw0", NULL, NULL -+}; -+ -+struct avalanche_ictrl_regs *avalanche_hw0_icregs; /* Interrupt control regs (primary) */ -+struct avalanche_exctrl_regs *avalanche_hw0_ecregs; /* Exception control regs (secondary) */ -+struct avalanche_ipace_regs *avalanche_hw0_ipaceregs; -+struct avalanche_channel_int_number *avalanche_hw0_chregs; /* Channel control registers */ -+ -+/* -+ This remaps interrupts to exist on other channels than the default -+ channels. essentially we can use the line # as the index for this -+ array -+ */ -+ -+static unsigned long line_to_channel[AVINTNUM(AVALANCHE_INT_END_PRIMARY)]; -+unsigned long uni_secondary_interrupt = 0; -+ -+static void end_avalanche_irq(unsigned int irq) -+{ -+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) -+ enable_avalanche_irq(irq); -+} -+ -+void disable_avalanche_irq(unsigned int irq_nr) -+{ -+ unsigned long flags; -+ unsigned long chan_nr=0; -+ -+ save_and_cli(flags); -+ -+ /* irq_nr represents the line number for the interrupt. We must -+ * disable the channel number associated with that line number. -+ */ -+ -+ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2) -+ chan_nr = AVINTNUM(irq_nr); /*CHECK THIS ALSO*/ -+ else -+ chan_nr = line_to_channel[AVINTNUM(irq_nr)];/* WE NEED A LINE TO CHANNEL MAPPING FUNCTION HERE*/ -+ -+ /* disable the interrupt channel bit */ -+ -+ /* primary interrupt #'s 0-31 */ -+ -+ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)) -+ avalanche_hw0_icregs->intecr1 = (1 << chan_nr); -+ -+ /* primary interrupt #'s 32-39 */ -+ -+ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) && -+ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))) -+ avalanche_hw0_icregs->intecr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY))); -+ -+ else /* secondary interrupt #'s 0-31 */ -+ avalanche_hw0_ecregs->exiecr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY))); -+ -+ restore_flags(flags); -+} -+ -+void enable_avalanche_irq(unsigned int irq_nr) -+{ -+ unsigned long flags; -+ unsigned long chan_nr=0; -+ -+ save_and_cli(flags); -+ -+ /* irq_nr represents the line number for the interrupt. We must -+ * disable the channel number associated with that line number. -+ */ -+ -+ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2) -+ chan_nr = AVINTNUM(irq_nr); -+ else -+ chan_nr = line_to_channel[AVINTNUM(irq_nr)]; -+ -+ /* enable the interrupt channel bit */ -+ -+ /* primary interrupt #'s 0-31 */ -+ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)) -+ avalanche_hw0_icregs->intesr1 = (1 << chan_nr); -+ -+ /* primary interrupt #'s 32 throuth 39 */ -+ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) && -+ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))) -+ avalanche_hw0_icregs->intesr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY))); -+ -+ else /* secondary interrupt #'s 0-31 */ -+ avalanche_hw0_ecregs->exiesr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY))); -+ -+ restore_flags(flags); -+} -+ -+static unsigned int startup_avalanche_irq(unsigned int irq) -+{ -+ enable_avalanche_irq(irq); -+ return 0; /* never anything pending */ -+} -+ -+void __init ar7_irq_init(int base) -+{ -+ int i; -+ -+ avalanche_hw0_icregs = (struct avalanche_ictrl_regs *)AVALANCHE_ICTRL_REGS_BASE; -+ avalanche_hw0_ecregs = (struct avalanche_exctrl_regs *)AVALANCHE_ECTRL_REGS_BASE; -+ avalanche_hw0_ipaceregs = (struct avalanche_ipace_regs *)AVALANCHE_IPACE_REGS_BASE; -+ avalanche_hw0_chregs = (struct avalanche_channel_int_number *)AVALANCHE_CHCTRL_REGS_BASE; -+ -+ /* Disable interrupts and clear pending -+ */ -+ -+ avalanche_hw0_icregs->intecr1 = 0xffffffff; /* disable interrupts 0:31 */ -+ avalanche_hw0_icregs->intcr1 = 0xffffffff; /* clear interrupts 0:31 */ -+ avalanche_hw0_icregs->intecr2 = 0xff; /* disable interrupts 32:39 */ -+ avalanche_hw0_icregs->intcr2 = 0xff; /* clear interrupts 32:39 */ -+ avalanche_hw0_ecregs->exiecr = 0xffffffff; /* disable secondary interrupts 0:31 */ -+ avalanche_hw0_ecregs->excr = 0xffffffff; /* clear secondary interrupts 0:31 */ -+ -+ -+ // avalanche_hw0_ipaceregs->ipacep = (2*get_avalanche_vbus_freq()/1000000)*4; -+ /* hack for speeding up the pacing. */ -+ printk("the pacing pre-scalar has been set as 600.\n"); -+ avalanche_hw0_ipaceregs->ipacep = 600; -+ /* Channel to line mapping, Line to Channel mapping */ -+ -+ for(i = 0; i < 40; i++) -+ avalanche_int_set(i,i); -+ -+ ar7_irq_base = base; -+ for (i = base; i <= base+40; i++) -+ { -+ irq_desc[i].status = IRQ_DISABLED; -+ irq_desc[i].action = 0; -+ irq_desc[i].depth = 1; -+ irq_desc[i].handler = &avalanche_irq_type; -+ } -+ -+ setup_irq(2, &ar7_hw0_action); -+ set_c0_status(IE_IRQ0); -+ -+ return; -+} -+ -+void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs) -+{ -+ int irq; -+ unsigned long int_line_number, status; -+ int i, chan_nr = 0; -+ -+ int_line_number = ((avalanche_hw0_icregs->pintir >> 16) & 0x3F); -+ chan_nr = ((avalanche_hw0_icregs->pintir) & 0x3F); -+ -+ if(chan_nr < 32) /* primary 0-31 */ -+ { -+ if( chan_nr != uni_secondary_interrupt) -+ avalanche_hw0_icregs->intcr1 = (1< 31)) /* primary 32-39 */ -+ { -+ avalanche_hw0_icregs->intcr2 = (1<<(chan_nr-32)); -+ } -+ -+ -+ /* If the Priority Interrupt Index Register returns 40 then no -+ * interrupts are pending -+ */ -+ -+ if(chan_nr == 40) -+ return; -+ -+ if(chan_nr == uni_secondary_interrupt) /* secondary 0-31 */ -+ { -+ status = avalanche_hw0_ecregs->exsr; -+ for(i=0; i < 32; i++) -+ { -+ if (status & 1<excr = 1 << i; -+ break; -+ } -+ } -+ irq = i+40; -+ -+ /* clear the universal secondary interrupt */ -+ avalanche_hw0_icregs->intcr1 = 1 << uni_secondary_interrupt; -+ -+ } -+ else -+ irq = chan_nr; -+ -+ do_IRQ(irq + ar7_irq_base, regs); -+ return; -+} -+ -+void avalanche_int_set(int channel, int line) -+{ -+ switch(channel) -+ { -+ case(0): -+ avalanche_hw0_chregs->cintnr0 = line; -+ break; -+ case(1): -+ avalanche_hw0_chregs->cintnr1 = line; -+ break; -+ case(2): -+ avalanche_hw0_chregs->cintnr2 = line; -+ break; -+ case(3): -+ avalanche_hw0_chregs->cintnr3 = line; -+ break; -+ case(4): -+ avalanche_hw0_chregs->cintnr4 = line; -+ break; -+ case(5): -+ avalanche_hw0_chregs->cintnr5 = line; -+ break; -+ case(6): -+ avalanche_hw0_chregs->cintnr6 = line; -+ break; -+ case(7): -+ avalanche_hw0_chregs->cintnr7 = line; -+ break; -+ case(8): -+ avalanche_hw0_chregs->cintnr8 = line; -+ break; -+ case(9): -+ avalanche_hw0_chregs->cintnr9 = line; -+ break; -+ case(10): -+ avalanche_hw0_chregs->cintnr10 = line; -+ break; -+ case(11): -+ avalanche_hw0_chregs->cintnr11 = line; -+ break; -+ case(12): -+ avalanche_hw0_chregs->cintnr12 = line; -+ break; -+ case(13): -+ avalanche_hw0_chregs->cintnr13 = line; -+ break; -+ case(14): -+ avalanche_hw0_chregs->cintnr14 = line; -+ break; -+ case(15): -+ avalanche_hw0_chregs->cintnr15 = line; -+ break; -+ case(16): -+ avalanche_hw0_chregs->cintnr16 = line; -+ break; -+ case(17): -+ avalanche_hw0_chregs->cintnr17 = line; -+ break; -+ case(18): -+ avalanche_hw0_chregs->cintnr18 = line; -+ break; -+ case(19): -+ avalanche_hw0_chregs->cintnr19 = line; -+ break; -+ case(20): -+ avalanche_hw0_chregs->cintnr20 = line; -+ break; -+ case(21): -+ avalanche_hw0_chregs->cintnr21 = line; -+ break; -+ case(22): -+ avalanche_hw0_chregs->cintnr22 = line; -+ break; -+ case(23): -+ avalanche_hw0_chregs->cintnr23 = line; -+ break; -+ case(24): -+ avalanche_hw0_chregs->cintnr24 = line; -+ break; -+ case(25): -+ avalanche_hw0_chregs->cintnr25 = line; -+ break; -+ case(26): -+ avalanche_hw0_chregs->cintnr26 = line; -+ break; -+ case(27): -+ avalanche_hw0_chregs->cintnr27 = line; -+ break; -+ case(28): -+ avalanche_hw0_chregs->cintnr28 = line; -+ break; -+ case(29): -+ avalanche_hw0_chregs->cintnr29 = line; -+ break; -+ case(30): -+ avalanche_hw0_chregs->cintnr30 = line; -+ break; -+ case(31): -+ avalanche_hw0_chregs->cintnr31 = line; -+ break; -+ case(32): -+ avalanche_hw0_chregs->cintnr32 = line; -+ break; -+ case(33): -+ avalanche_hw0_chregs->cintnr33 = line; -+ break; -+ case(34): -+ avalanche_hw0_chregs->cintnr34 = line; -+ break; -+ case(35): -+ avalanche_hw0_chregs->cintnr35 = line; -+ break; -+ case(36): -+ avalanche_hw0_chregs->cintnr36 = line; -+ break; -+ case(37): -+ avalanche_hw0_chregs->cintnr37 = line; -+ break; -+ case(38): -+ avalanche_hw0_chregs->cintnr38 = line; -+ break; -+ case(39): -+ avalanche_hw0_chregs->cintnr39 = line; -+ break; -+ default: -+ printk("Error: Unknown Avalanche interrupt channel\n"); -+ } -+ -+ line_to_channel[line] = channel; /* Suraj check */ -+ -+ if (channel == UNIFIED_SECONDARY_INTERRUPT) -+ uni_secondary_interrupt = line; -+ -+} -+ -+ -+#define AVALANCHE_MAX_PACING_BLK 3 -+#define AVALANCHE_PACING_LOW_VAL 2 -+#define AVALANCHE_PACING_HIGH_VAL 63 -+ -+int avalanche_request_pacing(int irq_nr, unsigned int blk_num, -+ unsigned int pace_value) -+{ -+ unsigned int blk_offset; -+ unsigned long flags; -+ -+ if(irq_nr < MIPS_EXCEPTION_OFFSET && -+ irq_nr >= AVALANCHE_INT_END_PRIMARY) -+ return (0); -+ -+ if(blk_num > AVALANCHE_MAX_PACING_BLK) -+ return(-1); -+ -+ if(pace_value > AVALANCHE_PACING_HIGH_VAL && -+ pace_value < AVALANCHE_PACING_LOW_VAL) -+ return(-1); -+ -+ blk_offset = blk_num*8; -+ -+ save_and_cli(flags); -+ -+ /* disable the interrupt pacing, if enabled previously */ -+ avalanche_hw0_ipaceregs->ipacemax &= ~(0xff << blk_offset); -+ -+ /* clear the pacing map */ -+ avalanche_hw0_ipaceregs->ipacemap &= ~(0xff << blk_offset); -+ -+ /* setup the new values */ -+ avalanche_hw0_ipaceregs->ipacemap |= ((AVINTNUM(irq_nr)) << blk_offset); -+ avalanche_hw0_ipaceregs->ipacemax |= ((0x80 | pace_value) << blk_offset); -+ -+ restore_flags(flags); -+ -+ return(0); -+} -diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c ---- linux.old/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/memory.c 2005-11-10 01:14:16.372731750 +0100 -@@ -0,0 +1,103 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * ######################################################################## -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * ######################################################################## -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+extern char _ftext; -+extern int preserve_adam2; -+ -+void __init prom_meminit(void) -+{ -+ char *memsize_str; -+ unsigned long memsize, adam2size; -+ -+ /* assume block before kernel is used by bootloader */ -+ adam2size = __pa(&_ftext) - PHYS_OFFSET; -+ -+ memsize_str = prom_getenv("memsize"); -+ if (!memsize_str) { -+ memsize = 0x02000000; -+ } else { -+ memsize = simple_strtol(memsize_str, NULL, 0); -+ } -+ -+#if 0 -+ add_memory_region(0x00000000, PHYS_OFFSET, BOOT_MEM_RESERVED); -+#endif -+ add_memory_region(PHYS_OFFSET, adam2size, BOOT_MEM_ROM_DATA); -+ add_memory_region(PHYS_OFFSET+adam2size, memsize-adam2size, -+ BOOT_MEM_RAM); -+} -+ -+unsigned long __init prom_free_prom_memory (void) -+{ -+ int i; -+ unsigned long freed = 0; -+ unsigned long addr; -+ -+ if (preserve_adam2) { -+ char *firstfree_str = prom_getenv("firstfreeaddress"); -+ unsigned long firstfree = 0; -+ -+ if (firstfree_str) -+ firstfree = simple_strtol(firstfree_str, NULL, 0); -+ -+ if (firstfree && firstfree < (unsigned long)&_ftext) { -+ printk("Preserving ADAM2 memory.\n"); -+ } else if (firstfree) { -+ printk("Can't preserve ADAM2 memory, " -+ "firstfreeaddress = %08lx.\n", firstfree); -+ preserve_adam2 = 0; -+ } else { -+ printk("Can't preserve ADAM2 memory, " -+ "firstfreeaddress unknown!\n"); -+ preserve_adam2 = 0; -+ } -+ } -+ -+ if (!preserve_adam2) { -+ for (i = 0; i < boot_mem_map.nr_map; i++) { -+ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) -+ continue; -+ -+ addr = boot_mem_map.map[i].addr; -+ while (addr < boot_mem_map.map[i].addr -+ + boot_mem_map.map[i].size) { -+ ClearPageReserved(virt_to_page(__va(addr))); -+ set_page_count(virt_to_page(__va(addr)), 1); -+ free_page((unsigned long)__va(addr)); -+ addr += PAGE_SIZE; -+ freed += PAGE_SIZE; -+ } -+ } -+ printk("Freeing prom memory: %ldkb freed\n", freed >> 10); -+ } -+ return freed >> PAGE_SHIFT; -+} -diff -urN linux.old/arch/mips/ar7/misc.c linux.dev/arch/mips/ar7/misc.c ---- linux.old/arch/mips/ar7/misc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/misc.c 2005-11-10 01:12:43.946955500 +0100 -@@ -0,0 +1,322 @@ -+#include -+#include -+#include -+#include -+ -+#define TRUE 1 -+ -+static unsigned int avalanche_vbus_freq; -+ -+REMOTE_VLYNQ_DEV_RESET_CTRL_FN p_remote_vlynq_dev_reset_ctrl = NULL; -+ -+/***************************************************************************** -+ * Reset Control Module. -+ *****************************************************************************/ -+void avalanche_reset_ctrl(unsigned int module_reset_bit, -+ AVALANCHE_RESET_CTRL_T reset_ctrl) -+{ -+ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR; -+ -+ if(module_reset_bit >= 32 && module_reset_bit < 64) -+ return; -+ -+ if(module_reset_bit >= 64) -+ { -+ if(p_remote_vlynq_dev_reset_ctrl) { -+ p_remote_vlynq_dev_reset_ctrl(module_reset_bit - 64, reset_ctrl); -+ return; -+ } -+ else -+ return; -+ } -+ -+ if(reset_ctrl == OUT_OF_RESET) -+ *reset_reg |= 1 << module_reset_bit; -+ else -+ *reset_reg &= ~(1 << module_reset_bit); -+ return; -+} -+ -+AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(unsigned int module_reset_bit) -+{ -+ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR; -+ -+ return (((*reset_reg) & (1 << module_reset_bit)) ? OUT_OF_RESET : IN_RESET ); -+} -+ -+void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode) -+{ -+ volatile unsigned int *sw_reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_SWRCR; -+ *sw_reset_reg = mode; -+} -+ -+#define AVALANCHE_RST_CTRL_RSR_MASK 0x3 -+ -+AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status() -+{ -+ volatile unsigned int *sys_reset_status = (unsigned int*) AVALANCHE_RST_CTRL_RSR; -+ -+ return ( (AVALANCHE_SYS_RESET_STATUS_T) (*sys_reset_status & AVALANCHE_RST_CTRL_RSR_MASK) ); -+} -+ -+ -+/***************************************************************************** -+ * Power Control Module -+ *****************************************************************************/ -+#define AVALANCHE_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */ -+#define AVALANCHE_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */ -+ -+ -+void avalanche_power_ctrl(unsigned int module_power_bit, AVALANCHE_POWER_CTRL_T power_ctrl) -+{ -+ volatile unsigned int *power_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR; -+ -+ if (power_ctrl == POWER_CTRL_POWER_DOWN) -+ /* power down the module */ -+ *power_reg |= (1 << module_power_bit); -+ else -+ /* power on the module */ -+ *power_reg &= (~(1 << module_power_bit)); -+} -+ -+AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int module_power_bit) -+{ -+ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR; -+ -+ return (((*power_status_reg) & (1 << module_power_bit)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP); -+} -+ -+void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode) -+{ -+ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR; -+ -+ *power_status_reg &= AVALANCHE_GLOBAL_POWER_DOWN_MASK; -+ *power_status_reg |= ( power_mode << AVALANCHE_GLOBAL_POWER_DOWN_BIT); -+} -+ -+AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void) -+{ -+ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR; -+ -+ return((AVALANCHE_SYS_POWER_MODE_T) (((*power_status_reg) & (~AVALANCHE_GLOBAL_POWER_DOWN_MASK)) -+ >> AVALANCHE_GLOBAL_POWER_DOWN_BIT)); -+} -+ -+/***************************************************************************** -+ * GPIO Control -+ *****************************************************************************/ -+ -+/**************************************************************************** -+ * FUNCTION: avalanche_gpio_init -+ ***************************************************************************/ -+void avalanche_gpio_init(void) -+{ -+ spinlock_t closeLock; -+ unsigned int closeFlag; -+ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR; -+ spin_lock_irqsave(&closeLock, closeFlag); -+ *reset_reg |= (1 << AVALANCHE_GPIO_RESET_BIT); -+ spin_unlock_irqrestore(&closeLock, closeFlag); -+} -+ -+/**************************************************************************** -+ * FUNCTION: avalanche_gpio_ctrl -+ ***************************************************************************/ -+int avalanche_gpio_ctrl(unsigned int gpio_pin, -+ AVALANCHE_GPIO_PIN_MODE_T pin_mode, -+ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction) -+{ -+ spinlock_t closeLock; -+ unsigned int closeFlag; -+ volatile unsigned int *gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_ENBL; -+ -+ if(gpio_pin >= 32) -+ return(-1); -+ -+ spin_lock_irqsave(&closeLock, closeFlag); -+ -+ if(pin_mode == GPIO_PIN) -+ { -+ *gpio_ctrl |= (1 << gpio_pin); -+ -+ gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_DIR; -+ -+ if(pin_direction == GPIO_INPUT_PIN) -+ *gpio_ctrl |= (1 << gpio_pin); -+ else -+ *gpio_ctrl &= ~(1 << gpio_pin); -+ } -+ else /* FUNCTIONAL PIN */ -+ { -+ *gpio_ctrl &= ~(1 << gpio_pin); -+ } -+ -+ spin_unlock_irqrestore(&closeLock, closeFlag); -+ -+ return (0); -+} -+ -+/**************************************************************************** -+ * FUNCTION: avalanche_gpio_out -+ ***************************************************************************/ -+int avalanche_gpio_out_bit(unsigned int gpio_pin, int value) -+{ -+ spinlock_t closeLock; -+ unsigned int closeFlag; -+ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT; -+ -+ if(gpio_pin >= 32) -+ return(-1); -+ -+ spin_lock_irqsave(&closeLock, closeFlag); -+ if(value == TRUE) -+ *gpio_out |= 1 << gpio_pin; -+ else -+ *gpio_out &= ~(1 << gpio_pin); -+ spin_unlock_irqrestore(&closeLock, closeFlag); -+ -+ return(0); -+} -+ -+/**************************************************************************** -+ * FUNCTION: avalanche_gpio_in -+ ***************************************************************************/ -+int avalanche_gpio_in_bit(unsigned int gpio_pin) -+{ -+ spinlock_t closeLock; -+ unsigned int closeFlag; -+ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN; -+ int ret_val = 0; -+ -+ if(gpio_pin >= 32) -+ return(-1); -+ -+ spin_lock_irqsave(&closeLock, closeFlag); -+ ret_val = ((*gpio_in) & (1 << gpio_pin)); -+ spin_unlock_irqrestore(&closeLock, closeFlag); -+ -+ return (ret_val); -+} -+ -+/**************************************************************************** -+ * FUNCTION: avalanche_gpio_out_val -+ ***************************************************************************/ -+int avalanche_gpio_out_value(unsigned int out_val, unsigned int out_mask, -+ unsigned int reg_index) -+{ -+ spinlock_t closeLock; -+ unsigned int closeFlag; -+ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT; -+ -+ if(reg_index > 0) -+ return(-1); -+ -+ spin_lock_irqsave(&closeLock, closeFlag); -+ *gpio_out &= ~out_mask; -+ *gpio_out |= out_val; -+ spin_unlock_irqrestore(&closeLock, closeFlag); -+ -+ return(0); -+} -+ -+/**************************************************************************** -+ * FUNCTION: avalanche_gpio_in_value -+ ***************************************************************************/ -+int avalanche_gpio_in_value(unsigned int* in_val, unsigned int reg_index) -+{ -+ spinlock_t closeLock; -+ unsigned int closeFlag; -+ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN; -+ -+ if(reg_index > 0) -+ return(-1); -+ -+ spin_lock_irqsave(&closeLock, closeFlag); -+ *in_val = *gpio_in; -+ spin_unlock_irqrestore(&closeLock, closeFlag); -+ -+ return (0); -+} -+ -+/*********************************************************************** -+ * -+ * Wakeup Control Module for TNETV1050 Communication Processor -+ * -+ ***********************************************************************/ -+ -+#define AVALANCHE_WAKEUP_POLARITY_BIT 16 -+ -+void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int, -+ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl, -+ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity) -+{ -+ volatile unsigned int *wakeup_status_reg = (unsigned int*) AVALANCHE_WAKEUP_CTRL_WKCR; -+ -+ /* enable/disable */ -+ if (wakeup_ctrl == WAKEUP_ENABLED) -+ /* enable wakeup */ -+ *wakeup_status_reg |= wakeup_int; -+ else -+ /* disable wakeup */ -+ *wakeup_status_reg &= (~wakeup_int); -+ -+ /* set polarity */ -+ if (wakeup_polarity == WAKEUP_ACTIVE_LOW) -+ *wakeup_status_reg |= (wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT); -+ else -+ *wakeup_status_reg &= ~(wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT); -+} -+ -+void avalanche_set_vbus_freq(unsigned int new_vbus_freq) -+{ -+ avalanche_vbus_freq = new_vbus_freq; -+} -+ -+unsigned int avalanche_get_vbus_freq() -+{ -+ return(avalanche_vbus_freq); -+} -+ -+unsigned int avalanche_get_chip_version_info() -+{ -+ return(*(volatile unsigned int*)AVALANCHE_CVR); -+} -+ -+SET_MDIX_ON_CHIP_FN_T p_set_mdix_on_chip_fn = NULL; -+ -+int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation) -+{ -+ if(p_set_mdix_on_chip_fn) -+ return (p_set_mdix_on_chip_fn(base_addr, operation)); -+ else -+ return(-1); -+} -+ -+unsigned int avalanche_is_mdix_on_chip(void) -+{ -+ return(p_set_mdix_on_chip_fn ? 1:0); -+} -+ -+EXPORT_SYMBOL(avalanche_reset_ctrl); -+EXPORT_SYMBOL(avalanche_get_reset_status); -+EXPORT_SYMBOL(avalanche_sys_reset); -+EXPORT_SYMBOL(avalanche_get_sys_last_reset_status); -+EXPORT_SYMBOL(avalanche_power_ctrl); -+EXPORT_SYMBOL(avalanche_get_power_status); -+EXPORT_SYMBOL(avalanche_set_global_power_mode); -+EXPORT_SYMBOL(avalanche_get_global_power_mode); -+EXPORT_SYMBOL(avalanche_set_mdix_on_chip); -+EXPORT_SYMBOL(avalanche_is_mdix_on_chip); -+ -+EXPORT_SYMBOL(avalanche_gpio_init); -+EXPORT_SYMBOL(avalanche_gpio_ctrl); -+EXPORT_SYMBOL(avalanche_gpio_out_bit); -+EXPORT_SYMBOL(avalanche_gpio_in_bit); -+EXPORT_SYMBOL(avalanche_gpio_out_value); -+EXPORT_SYMBOL(avalanche_gpio_in_value); -+ -+EXPORT_SYMBOL(avalanche_set_vbus_freq); -+EXPORT_SYMBOL(avalanche_get_vbus_freq); -+ -+EXPORT_SYMBOL(avalanche_get_chip_version_info); -+ -diff -urN linux.old/arch/mips/ar7/platform.h linux.dev/arch/mips/ar7/platform.h ---- linux.old/arch/mips/ar7/platform.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/platform.h 2005-11-10 01:10:45.799571750 +0100 -@@ -0,0 +1,65 @@ -+#ifndef _PLATFORM_H_ -+#define _PLATFORM_H_ -+ -+#include -+ -+ -+/* Important: The definition of ENV_SPACE_SIZE should match with that in -+ * PSPBoot. (/psp_boot/inc/psbl/env.h) -+ */ -+#ifdef CONFIG_MIPS_AVALANCHE_TICFG -+#define ENV_SPACE_SIZE (10 * 1024) -+#endif -+ -+#ifdef CONFIG_MIPS_TNETV1050SDB -+#define TNETV1050SDB -+#define DUAL_FLASH -+#endif -+ -+#ifdef CONFIG_MIPS_AR7DB -+#define TNETD73XX_BOARD -+#define AR7DB -+#endif -+ -+#ifdef CONFIG_MIPS_AR7RD -+#define TNETD73XX_BOARD -+#define AR7RD -+#endif -+ -+#ifdef CONFIG_AR7WRD -+#define TNETD73XX_BOARD -+#define AR7WRD -+#endif -+ -+#ifdef CONFIG_MIPS_AR7VWI -+#define TNETD73XX_BOARD -+#define AR7VWi -+#endif -+ -+/* Merging from the DEV_DSL-PSPL4.3.2.7_Patch release. */ -+#ifdef CONFIG_MIPS_AR7VW -+#define TNETD73XX_BOARD -+#define AR7WRD -+#endif -+ -+#ifdef CONFIG_MIPS_AR7WI -+#define TNETD73XX_BOARD -+#define AR7Wi -+#endif -+ -+#ifdef CONFIG_MIPS_AR7V -+#define TNETD73XX_BOARD -+#define AR7V -+#endif -+ -+#ifdef CONFIG_MIPS_AR7V -+#define TNETD73XX_BOARD -+#define AR7V -+#endif -+ -+#ifdef CONFIG_MIPS_WA1130 -+#define AVALANCHE -+#define WLAN -+#endif -+ -+#endif -diff -urN linux.old/arch/mips/ar7/promlib.c linux.dev/arch/mips/ar7/promlib.c ---- linux.old/arch/mips/ar7/promlib.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/promlib.c 2005-11-10 01:14:16.372731750 +0100 -@@ -0,0 +1,48 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * Putting things on the screen/serial line using Adam2 facilities. -+ */ -+ -+#include -+#include -+ -+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500)) -+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR \ -+ (AVALANCHE_YAMON_FUNCTION_BASE + 1 * 0x4) -+#define AVALANCHE_YAMON_PROM_EXIT \ -+ (AVALANCHE_YAMON_FUNCTION_BASE + 8 * 0x4) -+ -+void prom_putchar(char c) -+{ -+ static char buf[1]; -+ void (*prom_print_str)(unsigned int dummy, char *s, int len) = -+ (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR); -+ -+ buf[0] = c; -+ prom_print_str(1, buf, 1); -+ return; -+} -+ -+void adam2_exit(int retval) -+{ -+ void (*yamon_exit)(int retval) = -+ (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_EXIT); -+ -+ yamon_exit(retval); -+ return; -+} -diff -urN linux.old/arch/mips/ar7/psp_env.c linux.dev/arch/mips/ar7/psp_env.c ---- linux.old/arch/mips/ar7/psp_env.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/psp_env.c 2005-11-10 01:10:45.799571750 +0100 -@@ -0,0 +1,350 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "platform.h" -+ -+#define ENV_CELL_SIZE 16 -+ -+/* control field decode */ -+#define ENV_GARBAGE_BIT 0x01 /* Env is garbage if this bit is off */ -+#define ENV_DYNAMIC_BIT 0x02 /* Env is dynamic if this bit is off */ -+ -+#define ENV_CTRL_MASK 0x03 -+#define ENV_PREFINED (ENV_GARBAGE_BIT | ENV_DYNAMIC_BIT) -+#define ENV_DYNAMIC (ENV_GARBAGE_BIT) -+ -+struct env_variable { -+ unsigned char varNum; -+ unsigned char ctrl; -+ unsigned short chksum; -+ unsigned char numCells; -+ unsigned char data[ENV_CELL_SIZE - 5]; /* The data section starts -+ * here, continues for -+ * numCells. -+ */ -+}; -+ -+extern unsigned int max_env_entry; -+ -+/* Internal macros */ -+#define get_next_block(var) ((struct env_variable *)( (char*)(var) + (var)->numCells * ENV_CELL_SIZE)) -+ -+typedef enum ENV_VARS { -+ env_vars_start = 0, -+ CPUFREQ, -+ MEMSZ, -+ FLASHSZ, -+ MODETTY0, -+ MODETTY1, -+ PROMPT, -+ BOOTCFG, -+ HWA_0, -+#if !defined (AVALANCHE) || defined(TNETC401B) -+ HWA_1, -+#endif -+#if !defined(TNETV1020_BOARD) -+ HWA_RNDIS, -+#endif -+#if defined (TNETD73XX_BOARD) -+ HWA_3, -+#endif -+ IPA, -+ IPA_SVR, -+ BLINE_MAC0, -+#if !defined (AVALANCHE) || defined(TNETC401B) -+ BLINE_MAC1, -+#endif -+#if !defined(TNETV1020_BOARD) -+ BLINE_RNDIS, -+#endif -+#if defined (TNETD73XX_BOARD) -+ BLINE_ATM, -+#endif -+#if !defined(TNETV1020_BOARD) -+ USB_PID, -+ USB_VID, -+ USB_EPPOLLI, -+#endif -+ IPA_GATEWAY, -+ SUBNET_MASK, -+#if defined (TNETV1050_BOARD) -+ BLINE_ESWITCH, -+#endif -+#if !defined(TNETV1020_BOARD) -+ USB_SERIAL, -+ HWA_HRNDIS, /* Host (PC) side RNDIS address */ -+#endif -+ REMOTE_USER, -+ REMOTE_PASS, -+ REMOTE_DIR, -+ SYSFREQ, -+ LINK_TIMEOUT, -+#ifndef AVALANCHE /* Avalanche boards use only one mac port */ -+ MAC_PORT, -+#endif -+ PATH, -+ HOSTNAME, -+#ifdef WLAN -+ HW_REV_MAJOR, -+ HW_REV_MINOR, -+ HW_PATCH, -+ SW_PATCH, -+ SERIAL_NUMBER, -+#endif -+ TFTPCFG, -+#if defined (TNETV1050_BOARD) -+ HWA_ESWITCH, -+#endif -+ /* -+ * Add new env variables here. -+ * NOTE: New environment variables should always be placed at the end, ie -+ * just before env_vars_end. -+ */ -+ -+ env_vars_end -+} ENV_VARS; -+ -+ -+struct env_description { -+ ENV_VARS idx; -+ char *nm; -+ char *alias; -+}; -+ -+#define ENVSTR(x) #x -+#define _ENV_ENTRY(x) {.idx = x, .nm = ENVSTR(x), .alias = NULL} -+ -+struct env_description env_ns[] = { -+ _ENV_ENTRY(env_vars_start), /* start. */ -+ _ENV_ENTRY(CPUFREQ), -+ _ENV_ENTRY(MEMSZ), -+ _ENV_ENTRY(FLASHSZ), -+ _ENV_ENTRY(MODETTY0), -+ _ENV_ENTRY(MODETTY1), -+ _ENV_ENTRY(PROMPT), -+ _ENV_ENTRY(BOOTCFG), -+ _ENV_ENTRY(HWA_0), -+#if !defined (AVALANCHE) || defined(TNETC401B) -+ _ENV_ENTRY(HWA_1), -+#endif -+#if !defined(TNETV1020_BOARD) -+ _ENV_ENTRY(HWA_RNDIS), -+#endif -+#if defined (TNETD73XX_BOARD) -+ _ENV_ENTRY(HWA_3), -+#endif -+ _ENV_ENTRY(IPA), -+ _ENV_ENTRY(IPA_SVR), -+ _ENV_ENTRY(IPA_GATEWAY), -+ _ENV_ENTRY(SUBNET_MASK), -+ _ENV_ENTRY(BLINE_MAC0), -+#if !defined (AVALANCHE) || defined(TNETC401B) -+ _ENV_ENTRY(BLINE_MAC1), -+#endif -+#if !defined(TNETV1020_BOARD) -+ _ENV_ENTRY(BLINE_RNDIS), -+#endif -+#if defined (TNETD73XX_BOARD) -+ _ENV_ENTRY(BLINE_ATM), -+#endif -+#if !defined(TNETV1020_BOARD) -+ _ENV_ENTRY(USB_PID), -+ _ENV_ENTRY(USB_VID), -+ _ENV_ENTRY(USB_EPPOLLI), -+#endif -+#if defined (TNETV1050_BOARD) -+ _ENV_ENTRY(BLINE_ESWITCH), -+#endif -+#if !defined(TNETV1020_BOARD) -+ _ENV_ENTRY(USB_SERIAL), -+ _ENV_ENTRY(HWA_HRNDIS), -+#endif -+ _ENV_ENTRY(REMOTE_USER), -+ _ENV_ENTRY(REMOTE_PASS), -+ _ENV_ENTRY(REMOTE_DIR), -+ _ENV_ENTRY(SYSFREQ), -+ _ENV_ENTRY(LINK_TIMEOUT), -+#ifndef AVALANCHE /* Avalanche boards use only one mac port */ -+ _ENV_ENTRY(MAC_PORT), -+#endif -+ _ENV_ENTRY(PATH), -+ _ENV_ENTRY(HOSTNAME), -+#ifdef WLAN -+ _ENV_ENTRY(HW_REV_MAJOR), -+ _ENV_ENTRY(HW_REV_MINOR), -+ _ENV_ENTRY(HW_PATCH), -+ _ENV_ENTRY(SW_PATCH), -+ _ENV_ENTRY(SERIAL_NUMBER), -+#endif -+ _ENV_ENTRY(TFTPCFG), -+#if defined (TNETV1050_BOARD) -+ _ENV_ENTRY(HWA_ESWITCH), -+#endif -+ /* -+ * Add new entries below this. -+ */ -+ /* Adam2 environment name alias. */ -+ { .idx = IPA, .nm = "my_ipaddress" }, -+ { .idx = CPUFREQ, .nm = "cpufrequency" }, -+ { .idx = SYSFREQ, .nm = "sysfrequency" }, -+ { .idx = HWA_0, .nm = "maca" }, -+#ifndef AVALANCHE -+ { .idx = HWA_1, .nm = "macb" }, -+#endif -+ { .idx = MODETTY0, .nm = "modetty0" }, -+ { .idx = MODETTY1, .nm = "modetty1" }, -+ { .idx = MEMSZ, .nm = "memsize" }, -+ -+ _ENV_ENTRY(env_vars_end) /* delimiter. */ -+}; -+ -+static inline int var_to_idx(const char* var) -+{ -+ int ii; -+ -+ /* go over the list of pre-defined environment variables */ -+ for (ii = env_vars_start; env_ns[ii].idx != env_vars_end; ii++){ -+ /* check if the env variable is listed */ -+ if (strcmp(env_ns[ii].nm, var) == 0) { -+ return env_ns[ii].idx; -+ } -+ -+ /* if an alias is present, check if the alias matches -+ * the description -+ */ -+ if (env_ns[ii].alias != NULL) { -+ if (strcmp(env_ns[ii].alias, var) == 0) { -+ return env_ns[ii].idx; -+ } -+ } -+ } -+ return 0; -+} -+ -+extern int *_prom_envp; -+ -+/* FIXME: reading from the flash is extremly unstable. Sometime a read returns garbage, -+ * the next read some seconds later is ok. It looks like something is hidding or -+ * overlay the flash address at 0xb0000000. Is this possible? -+ * -+ * The readb() and while() usage below is a attempt of a workarround - with limited success. -+ */ -+ -+static inline struct env_variable* get_var_by_number(int index) -+{ -+ struct env_variable *env_var = (struct env_variable *)_prom_envp; -+ volatile unsigned char nr; -+ int i; -+ -+ env_var++; /* skip signature */ -+ -+ i = 0; -+ nr = readb(&(env_var->varNum)); -+ -+ while (i < max_env_entry && nr != 0xFF) { -+ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_PREFINED) { -+ if (nr == index) { -+ return env_var; -+ } -+ } -+ i++; -+ env_var = get_next_block(env_var); -+ nr = readb(&(env_var->varNum)); -+ } -+ -+ return NULL; -+} -+ -+static inline struct env_variable* get_var_by_name(char *var) -+{ -+ struct env_variable *env_var = (struct env_variable *)_prom_envp; -+ volatile unsigned char nr; -+ int i; -+ -+ env_var++; /* skip signature */ -+ -+ nr = readb(&(env_var->varNum)); -+ i = 0; -+ -+ while (i < max_env_entry && nr != 0xFF) { -+ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) { -+ if (strcmp(var, env_var->data) == 0) -+ return env_var; -+ } -+ i++; -+ env_var = get_next_block(env_var); -+ nr = readb(&(env_var->varNum)); -+ } -+ return NULL; -+} -+ -+static inline struct env_variable* get_var(char *var) -+{ -+ int index = var_to_idx(var); -+ -+ if (index) -+ return get_var_by_number(index); -+ else -+ return get_var_by_name(var); -+ -+ return NULL; -+} -+ -+static inline char *get_value(struct env_variable* env_var) -+{ -+ unsigned char *name; -+ unsigned char *value; -+ unsigned short chksum; -+ int i; -+ -+ chksum = env_var->varNum + env_var->ctrl + env_var->numCells; -+ -+ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) { -+ name = env_var->data; -+ value = env_var->data + strlen(name) + 1; -+ -+ for(i = 0; i < strlen(name); i++) -+ chksum += name[i]; -+ } else -+ value = env_var->data; -+ -+ for (i = 0; i < strlen(value); i++) -+ chksum += value[i]; -+ -+ chksum += env_var->chksum; -+ chksum = ~(chksum); -+ -+ if(chksum != 0) { -+ return NULL; -+ } -+ -+ return value; -+} -+ -+struct psbl_rec { -+ unsigned int psbl_size; -+ unsigned int env_base; -+ unsigned int env_size; -+ unsigned int ffs_base; -+ unsigned int ffs_size; -+}; -+ -+char *prom_psp_getenv(char *envname) -+{ -+ struct env_variable* env_var; -+ char *value; -+ -+ if (strcmp("bootloader", envname) == 0) -+ return "PSPBoot"; -+ -+ if (!(env_var = get_var(envname))) -+ return NULL; -+ -+ value = get_value(env_var); -+ -+ return value; -+} -diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c ---- linux.old/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/reset.c 2005-11-10 01:14:16.372731750 +0100 -@@ -0,0 +1,98 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * ######################################################################## -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * ######################################################################## -+ * -+ * Reset the AR7 boards. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+int preserve_adam2 = 1; -+ -+extern void adam2_exit(int retval); -+ -+static void ar7_machine_restart(char *command); -+static void ar7_machine_halt(void); -+static void ar7_machine_power_off(void); -+ -+static void ar7_machine_restart(char *command) -+{ -+ volatile uint32_t *softres_reg = (void *)(KSEG1ADDR(0x08611600 + 0x4)); -+ -+ *softres_reg = 1; -+} -+ -+static void ar7_machine_halt(void) -+{ -+ -+ if (preserve_adam2) { -+ set_c0_status(ST0_BEV); -+ adam2_exit(0); -+ } else { -+ /* I'd like to have Alt-SysRq-b work in this state. -+ * What's missing here? The timer interrupt is still running. -+ * Why doesn't the UART work anymore? */ -+ while(1) { -+ __asm__(".set\tmips3\n\t" -+ "wait\n\t" -+ ".set\tmips0"); -+ } -+ } -+} -+ -+static void ar7_machine_power_off(void) -+{ -+ volatile uint32_t *power_reg = (void *)(KSEG1ADDR(0x08610A00)); -+ uint32_t power_state = *power_reg; -+ -+ /* add something to turn LEDs off? */ -+ -+ power_state &= ~(3 << 30); -+ power_state |= (3 << 30); /* power down */ -+ *power_reg = power_state; -+ -+ printk("after power down?\n"); -+} -+ -+void ar7_reboot_setup(void) -+{ -+ _machine_restart = ar7_machine_restart; -+ _machine_halt = ar7_machine_halt; -+ _machine_power_off = ar7_machine_power_off; -+} -+ -+static int __init ar7_do_preserve_adam2(char *s) -+{ -+ if (!strcmp(s, "no") || !strcmp(s, "0")) -+ preserve_adam2 = 0; -+ else -+ preserve_adam2 = 1; -+ return 1; -+} -+ -+__setup("adam2=", ar7_do_preserve_adam2); -diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c ---- linux.old/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/setup.c 2005-11-10 01:12:43.946955500 +0100 -@@ -0,0 +1,143 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_KGDB -+extern void rs_kgdb_hook(int); -+extern void breakpoint(void); -+int remote_debug = 0; -+#endif -+ -+extern void ar7_reboot_setup(void); -+extern void ar7_irq_init(int); -+extern asmlinkage void ar7IRQ(void); -+ -+void ar7_time_init(void) -+{ -+ /* XXX runtime */ -+ mips_hpt_frequency = CONFIG_AR7_CPU * 500000; -+} -+ -+void ar7_timer_setup(struct irqaction *irq) -+{ -+ setup_irq(7, irq); -+ set_c0_status(IE_IRQ5); -+} -+ -+void __init init_IRQ(void) -+{ -+ init_generic_irq(); -+ mips_cpu_irq_init(0); -+ ar7_irq_init(8); -+ -+ /* Now safe to set the exception vector. */ -+ set_except_vector(0, ar7IRQ); -+ -+#ifdef CONFIG_KGDB -+ if (remote_debug) -+ { -+ set_debug_traps(); -+ breakpoint(); -+ } -+#endif -+} -+ -+const char *get_system_type(void) -+{ -+ return "Texas Instruments AR7"; -+} -+ -+void __init ar7_setup(void) -+{ -+#ifdef CONFIG_KGDB -+ int rs_putDebugChar(char); -+ char rs_getDebugChar(void); -+ extern int (*generic_putDebugChar)(char); -+ extern char (*generic_getDebugChar)(void); -+#endif -+ char *argptr; -+#ifdef CONFIG_SERIAL_CONSOLE -+ argptr = prom_getcmdline(); -+ if ((argptr = strstr(argptr, "console=")) == NULL) { -+ char console[20]; -+ char *s; -+ int i = 0; -+ -+ s = prom_getenv("modetty0"); -+ strcpy(console, "38400"); -+ -+ if (s != NULL) { -+ while (s[i] >= '0' && s[i] <= '9') -+ i++; -+ -+ if (i > 0) { -+ strncpy(console, s, i); -+ console[i] = 0; -+ } -+ } -+ -+ argptr = prom_getcmdline(); -+ strcat(argptr, " console=ttyS0,"); -+ strcat(argptr, console); -+ } -+#endif -+ -+#ifdef CONFIG_KGDB -+ argptr = prom_getcmdline(); -+ if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { -+ int line; -+ argptr += strlen("kgdb=ttyS"); -+ if (*argptr != '0' && *argptr != '1') -+ printk("KGDB: Uknown serial line /dev/ttyS%c, " -+ "falling back to /dev/ttyS1\n", *argptr); -+ line = *argptr == '0' ? 0 : 1; -+ printk("KGDB: Using serial line /dev/ttyS%d for session\n", -+ line ? 1 : 0); -+ -+ rs_kgdb_hook(line); -+ generic_putDebugChar = rs_putDebugChar; -+ generic_getDebugChar = rs_getDebugChar; -+ -+ prom_printf("KGDB: Using serial line /dev/ttyS%d for session, " -+ "please connect your debugger\n", line ? 1 : 0); -+ -+ remote_debug = 1; -+ /* Breakpoints are in init_IRQ() */ -+ } -+#endif -+ -+ argptr = prom_getcmdline(); -+ if ((argptr = strstr(argptr, "nofpu")) != NULL) -+ cpu_data[0].options &= ~MIPS_CPU_FPU; -+ -+ ar7_reboot_setup(); -+ -+ board_time_init = ar7_time_init; -+ board_timer_setup = ar7_timer_setup; -+} -diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd73xx_misc.c ---- linux.old/arch/mips/ar7/tnetd73xx_misc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-11-10 01:12:43.946955500 +0100 -@@ -0,0 +1,921 @@ -+/****************************************************************************** -+ * FILE PURPOSE: TNETD73xx Misc modules API Source -+ ****************************************************************************** -+ * FILE NAME: tnetd73xx_misc.c -+ * -+ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO -+ * FSER Modules API -+ * As per TNETD73xx specifications -+ * -+ * REVISION HISTORY: -+ * 27 Nov 02 - Sharath Kumar PSP TII -+ * 14 Feb 03 - Anant Gole PSP TII -+ * -+ * (C) Copyright 2002, Texas Instruments, Inc -+ *******************************************************************************/ -+ -+#include -+#include -+#include -+ -+/* TNETD73XX Revision */ -+u32 tnetd73xx_get_revision(void) -+{ -+ /* Read Chip revision register - This register is from GPIO module */ -+ return ( (u32) REG32_DATA(TNETD73XX_CVR)); -+} -+ -+/***************************************************************************** -+ * Reset Control Module -+ *****************************************************************************/ -+ -+ -+void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, TNETD73XX_RESET_CTRL_T reset_ctrl) -+{ -+ u32 reset_status; -+ -+ /* read current reset register */ -+ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status); -+ -+ if (reset_ctrl == OUT_OF_RESET) -+ { -+ /* bring module out of reset */ -+ reset_status |= (1 << reset_module); -+ } -+ else -+ { -+ /* put module in reset */ -+ reset_status &= (~(1 << reset_module)); -+ } -+ -+ /* write to the reset register */ -+ REG32_WRITE(TNETD73XX_RST_CTRL_PRCR, reset_status); -+} -+ -+ -+TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status (TNETD73XX_RESET_MODULE_T reset_module) -+{ -+ u32 reset_status; -+ -+ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status); -+ return ( (reset_status & (1 << reset_module)) ? OUT_OF_RESET : IN_RESET ); -+} -+ -+void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode) -+{ -+ REG32_WRITE(TNETD73XX_RST_CTRL_SWRCR, mode); -+} -+ -+#define TNETD73XX_RST_CTRL_RSR_MASK 0x3 -+ -+TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status() -+{ -+ u32 sys_reset_status; -+ -+ REG32_READ(TNETD73XX_RST_CTRL_RSR, sys_reset_status); -+ -+ return ( (TNETD73XX_SYS_RESET_STATUS_T) (sys_reset_status & TNETD73XX_RST_CTRL_RSR_MASK) ); -+} -+ -+ -+/***************************************************************************** -+ * Power Control Module -+ *****************************************************************************/ -+#define TNETD73XX_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */ -+#define TNETD73XX_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */ -+ -+ -+void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl) -+{ -+ u32 power_status; -+ -+ /* read current power down control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); -+ -+ if (power_ctrl == POWER_CTRL_POWER_DOWN) -+ { -+ /* power down the module */ -+ power_status |= (1 << power_module); -+ } -+ else -+ { -+ /* power on the module */ -+ power_status &= (~(1 << power_module)); -+ } -+ -+ /* write to the reset register */ -+ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status); -+} -+ -+TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module) -+{ -+ u32 power_status; -+ -+ /* read current power down control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); -+ -+ return ( (power_status & (1 << power_module)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP ); -+} -+ -+void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode) -+{ -+ u32 power_status; -+ -+ /* read current power down control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); -+ -+ power_status &= TNETD73XX_GLOBAL_POWER_DOWN_MASK; -+ power_status |= ( power_mode << TNETD73XX_GLOBAL_POWER_DOWN_BIT); -+ -+ /* write to power down control register */ -+ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status); -+} -+ -+TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode() -+{ -+ u32 power_status; -+ -+ /* read current power down control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); -+ -+ power_status &= (~TNETD73XX_GLOBAL_POWER_DOWN_MASK); -+ power_status = ( power_status >> TNETD73XX_GLOBAL_POWER_DOWN_BIT); -+ -+ return ( (TNETD73XX_SYS_POWER_MODE_T) power_status ); -+} -+ -+ -+/***************************************************************************** -+ * Wakeup Control -+ *****************************************************************************/ -+ -+#define TNETD73XX_WAKEUP_POLARITY_BIT 16 -+ -+void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int, -+ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl, -+ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity) -+{ -+ u32 wakeup_status; -+ -+ /* read the wakeup control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_WKCR, wakeup_status); -+ -+ /* enable/disable */ -+ if (wakeup_ctrl == WAKEUP_ENABLED) -+ { -+ /* enable wakeup */ -+ wakeup_status |= wakeup_int; -+ } -+ else -+ { -+ /* disable wakeup */ -+ wakeup_status &= (~wakeup_int); -+ } -+ -+ /* set polarity */ -+ if (wakeup_polarity == WAKEUP_ACTIVE_LOW) -+ { -+ wakeup_status |= (wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT); -+ } -+ else -+ { -+ wakeup_status &= ~(wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT); -+ } -+ -+ /* write the wakeup control register */ -+ REG32_WRITE(TNETD73XX_POWER_CTRL_WKCR, wakeup_status); -+} -+ -+ -+/***************************************************************************** -+ * FSER Control -+ *****************************************************************************/ -+ -+void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode) -+{ -+ REG32_WRITE(TNETD73XX_FSER_BASE, fser_mode); -+} -+ -+/***************************************************************************** -+ * Clock Control -+ *****************************************************************************/ -+ -+#define MIN(x,y) ( ((x) < (y)) ? (x) : (y) ) -+#define MAX(x,y) ( ((x) > (y)) ? (x) : (y) ) -+#define ABS(x) ( ((signed)(x) > 0) ? (x) : (-(x)) ) -+#define CEIL(x,y) ( ((x) + (y) / 2) / (y) ) -+ -+#define CLKC_CLKCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x20 + (0x20 * (x))) -+#define CLKC_CLKPLLCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x30 + (0x20 * (x))) -+ -+#define CLKC_PRE_DIVIDER 0x0000001F -+#define CLKC_POST_DIVIDER 0x001F0000 -+ -+#define CLKC_PLL_STATUS 0x1 -+#define CLKC_PLL_FACTOR 0x0000F000 -+ -+#define BOOTCR_PLL_BYPASS (1 << 5) -+#define BOOTCR_MIPS_ASYNC_MODE (1 << 25) -+ -+#define MIPS_PLL_SELECT 0x00030000 -+#define SYSTEM_PLL_SELECT 0x0000C000 -+#define USB_PLL_SELECT 0x000C0000 -+#define ADSLSS_PLL_SELECT 0x00C00000 -+ -+#define MIPS_AFECLKI_SELECT 0x00000000 -+#define MIPS_REFCLKI_SELECT 0x00010000 -+#define MIPS_XTAL3IN_SELECT 0x00020000 -+ -+#define SYSTEM_AFECLKI_SELECT 0x00000000 -+#define SYSTEM_REFCLKI_SELECT 0x00004000 -+#define SYSTEM_XTAL3IN_SELECT 0x00008000 -+#define SYSTEM_MIPSPLL_SELECT 0x0000C000 -+ -+#define USB_SYSPLL_SELECT 0x00000000 -+#define USB_REFCLKI_SELECT 0x00040000 -+#define USB_XTAL3IN_SELECT 0x00080000 -+#define USB_MIPSPLL_SELECT 0x000C0000 -+ -+#define ADSLSS_AFECLKI_SELECT 0x00000000 -+#define ADSLSS_REFCLKI_SELECT 0x00400000 -+#define ADSLSS_XTAL3IN_SELECT 0x00800000 -+#define ADSLSS_MIPSPLL_SELECT 0x00C00000 -+ -+#define SYS_MAX CLK_MHZ(150) -+#define SYS_MIN CLK_MHZ(1) -+ -+#define MIPS_SYNC_MAX SYS_MAX -+#define MIPS_ASYNC_MAX CLK_MHZ(160) -+#define MIPS_MIN CLK_MHZ(1) -+ -+#define USB_MAX CLK_MHZ(100) -+#define USB_MIN CLK_MHZ(1) -+ -+#define ADSL_MAX CLK_MHZ(180) -+#define ADSL_MIN CLK_MHZ(1) -+ -+#define PLL_MUL_MAXFACTOR 15 -+#define MAX_DIV_VALUE 32 -+#define MIN_DIV_VALUE 1 -+ -+#define MIN_PLL_INP_FREQ CLK_MHZ(8) -+#define MAX_PLL_INP_FREQ CLK_MHZ(100) -+ -+#define DIVIDER_LOCK_TIME 10100 -+#define PLL_LOCK_TIME 10100 * 75 -+ -+ -+ -+ /**************************************************************************** -+ * DATA PURPOSE: PRIVATE Variables -+ **************************************************************************/ -+ static u32 *clk_src[4]; -+ static u32 mips_pll_out; -+ static u32 sys_pll_out; -+ static u32 afeclk_inp; -+ static u32 refclk_inp; -+ static u32 xtal_inp; -+ static u32 present_min; -+ static u32 present_max; -+ -+ /* Forward References */ -+ static u32 find_gcd(u32 min, u32 max); -+ static u32 compute_prediv( u32 divider, u32 min, u32 max); -+ static void get_val(u32 base_freq, u32 output_freq,u32 *multiplier, u32 *divider); -+ static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id); -+ static void find_approx(u32 *,u32 *,u32); -+ -+ /**************************************************************************** -+ * FUNCTION: tnetd73xx_clkc_init -+ **************************************************************************** -+ * Description: The routine initializes the internal variables depending on -+ * on the sources selected for different clocks. -+ ***************************************************************************/ -+void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in) -+{ -+ -+ u32 choice; -+ -+ afeclk_inp = afeclk; -+ refclk_inp = refclk; -+ xtal_inp = xtal3in; -+ -+ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & MIPS_PLL_SELECT; -+ switch(choice) -+ { -+ case MIPS_AFECLKI_SELECT: -+ clk_src[CLKC_MIPS] = &afeclk_inp; -+ break; -+ -+ case MIPS_REFCLKI_SELECT: -+ clk_src[CLKC_MIPS] = &refclk_inp; -+ break; -+ -+ case MIPS_XTAL3IN_SELECT: -+ clk_src[CLKC_MIPS] = &xtal_inp; -+ break; -+ -+ default : -+ clk_src[CLKC_MIPS] = 0; -+ -+ } -+ -+ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & SYSTEM_PLL_SELECT; -+ switch(choice) -+ { -+ case SYSTEM_AFECLKI_SELECT: -+ clk_src[CLKC_SYS] = &afeclk_inp; -+ break; -+ -+ case SYSTEM_REFCLKI_SELECT: -+ clk_src[CLKC_SYS] = &refclk_inp; -+ break; -+ -+ case SYSTEM_XTAL3IN_SELECT: -+ clk_src[CLKC_SYS] = &xtal_inp; -+ break; -+ -+ case SYSTEM_MIPSPLL_SELECT: -+ clk_src[CLKC_SYS] = &mips_pll_out; -+ break; -+ -+ default : -+ clk_src[CLKC_SYS] = 0; -+ -+ } -+ -+ -+ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & ADSLSS_PLL_SELECT; -+ switch(choice) -+ { -+ case ADSLSS_AFECLKI_SELECT: -+ clk_src[CLKC_ADSLSS] = &afeclk_inp; -+ break; -+ -+ case ADSLSS_REFCLKI_SELECT: -+ clk_src[CLKC_ADSLSS] = &refclk_inp; -+ break; -+ -+ case ADSLSS_XTAL3IN_SELECT: -+ clk_src[CLKC_ADSLSS] = &xtal_inp; -+ break; -+ -+ case ADSLSS_MIPSPLL_SELECT: -+ clk_src[CLKC_ADSLSS] = &mips_pll_out; -+ break; -+ -+ default : -+ clk_src[CLKC_ADSLSS] = 0; -+ -+ } -+ -+ -+ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & USB_PLL_SELECT; -+ switch(choice) -+ { -+ case USB_SYSPLL_SELECT: -+ clk_src[CLKC_USB] = &sys_pll_out ; -+ break; -+ -+ case USB_REFCLKI_SELECT: -+ clk_src[CLKC_USB] = &refclk_inp; -+ break; -+ -+ case USB_XTAL3IN_SELECT: -+ clk_src[CLKC_USB] = &xtal_inp; -+ break; -+ -+ case USB_MIPSPLL_SELECT: -+ clk_src[CLKC_USB] = &mips_pll_out; -+ break; -+ -+ default : -+ clk_src[CLKC_USB] = 0; -+ -+ } -+} -+ -+ -+ -+/**************************************************************************** -+ * FUNCTION: tnetd73xx_clkc_set_freq -+ **************************************************************************** -+ * Description: The above routine is called to set the output_frequency of the -+ * selected clock(using clk_id) to the required value given -+ * by the variable output_freq. -+ ***************************************************************************/ -+TNETD73XX_ERR tnetd73xx_clkc_set_freq -+( -+ TNETD73XX_CLKC_ID_T clk_id, -+ u32 output_freq -+ ) -+{ -+ u32 base_freq; -+ u32 multiplier; -+ u32 divider; -+ u32 min_prediv; -+ u32 max_prediv; -+ u32 prediv; -+ u32 postdiv; -+ u32 temp; -+ -+ /* check if PLLs are bypassed*/ -+ if(REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ -+ /*check if the requested output_frequency is in valid range*/ -+ switch( clk_id ) -+ { -+ case CLKC_SYS: -+ if( output_freq < SYS_MIN || output_freq > SYS_MAX) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ present_min = SYS_MIN; -+ present_max = SYS_MAX; -+ break; -+ -+ case CLKC_MIPS: -+ if((output_freq < MIPS_MIN) || -+ (output_freq > ((REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX))) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ present_min = MIPS_MIN; -+ present_max = (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX; -+ break; -+ -+ case CLKC_USB: -+ if( output_freq < USB_MIN || output_freq > USB_MAX) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ present_min = USB_MIN; -+ present_max = USB_MAX; -+ break; -+ -+ case CLKC_ADSLSS: -+ if( output_freq < ADSL_MIN || output_freq > ADSL_MAX) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ present_min = ADSL_MIN; -+ present_max = ADSL_MAX; -+ break; -+ } -+ -+ -+ base_freq = get_base_frequency(clk_id); -+ -+ -+ /* check for minimum base frequency value */ -+ if( base_freq < MIN_PLL_INP_FREQ) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ -+ get_val(output_freq, base_freq, &multiplier, ÷r); -+ -+ /* check multiplier range */ -+ if( (multiplier > PLL_MUL_MAXFACTOR) || (multiplier <= 0) ) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ -+ /* check divider value */ -+ if( divider == 0 ) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ -+ /*compute minimum and maximum predivider values */ -+ min_prediv = MAX(base_freq / MAX_PLL_INP_FREQ + 1, divider / MAX_DIV_VALUE + 1); -+ max_prediv = MIN(base_freq / MIN_PLL_INP_FREQ, MAX_DIV_VALUE); -+ -+ /*adjust the value of divider so that it not less than minimum predivider value*/ -+ if (divider < min_prediv) -+ { -+ temp = CEIL(min_prediv, divider); -+ if ((temp * multiplier) > PLL_MUL_MAXFACTOR) -+ { -+ return TNETD73XX_ERR_ERROR ; -+ } -+ else -+ { -+ multiplier = temp * multiplier; -+ divider = min_prediv; -+ } -+ -+ } -+ -+ /* compute predivider and postdivider values */ -+ prediv = compute_prediv (divider, min_prediv, max_prediv); -+ postdiv = CEIL(divider,prediv); -+ -+ /*return fail if postdivider value falls out of range */ -+ if(postdiv > MAX_DIV_VALUE) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ -+ -+ /*write predivider and postdivider values*/ -+ /* pre-Divider and post-divider are 5 bit N+1 dividers */ -+ REG32_WRITE(CLKC_CLKCR(clk_id), ((postdiv -1) & 0x1F) << 16 | ((prediv -1) & 0x1F) ); -+ -+ /*wait for divider output to stabilise*/ -+ for(temp =0; temp < DIVIDER_LOCK_TIME; temp++); -+ -+ /*write to PLL clock register*/ -+ -+ if(clk_id == CLKC_SYS) -+ { -+ /* but before writing put DRAM to hold mode */ -+ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) |= 0x80000000; -+ } -+ /*Bring PLL into div mode */ -+ REG32_WRITE(CLKC_CLKPLLCR(clk_id), 0x4); -+ -+ /*compute the word to be written to PLLCR -+ *corresponding to multiplier value -+ */ -+ multiplier = (((multiplier - 1) & 0xf) << 12)| ((255 <<3) | 0x0e); -+ -+ /* wait till PLL enters div mode */ -+ while(REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS) -+ /*nothing*/; -+ -+ REG32_WRITE(CLKC_CLKPLLCR(clk_id), multiplier); -+ -+ while(!REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS) -+ /*nothing*/; -+ -+ -+ /*wait for External pll to lock*/ -+ for(temp =0; temp < PLL_LOCK_TIME; temp++); -+ -+ if(clk_id == CLKC_SYS) -+ { -+ /* Bring DRAM out of hold */ -+ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) &= ~0x80000000; -+ } -+ -+ return TNETD73XX_ERR_OK ; -+} -+ -+/**************************************************************************** -+ * FUNCTION: tnetd73xx_clkc_get_freq -+ **************************************************************************** -+ * Description: The above routine is called to get the output_frequency of the -+ * selected clock( clk_id) -+ ***************************************************************************/ -+u32 tnetd73xx_clkc_get_freq -+( -+ TNETD73XX_CLKC_ID_T clk_id -+ ) -+{ -+ -+ u32 clk_ctrl_register; -+ u32 clk_pll_setting; -+ u32 clk_predivider; -+ u32 clk_postdivider; -+ u16 pll_factor; -+ u32 base_freq; -+ u32 divider; -+ -+ base_freq = get_base_frequency(clk_id); -+ -+ clk_ctrl_register = REG32_DATA(CLKC_CLKCR(clk_id)); -+ -+ /* pre-Divider and post-divider are 5 bit N+1 dividers */ -+ clk_predivider = (CLKC_PRE_DIVIDER & clk_ctrl_register) + 1; -+ clk_postdivider = ((CLKC_POST_DIVIDER & clk_ctrl_register) >> 16) + 1; -+ -+ divider = clk_predivider * clk_postdivider; -+ -+ -+ if( (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS)) -+ { -+ return (CEIL(base_freq, divider)); /* PLLs bypassed.*/ -+ } -+ -+ -+ else -+ { -+ /* return the current clock speed based upon the PLL setting */ -+ clk_pll_setting = REG32_DATA(CLKC_CLKPLLCR(clk_id)); -+ -+ /* Get the PLL multiplication factor */ -+ pll_factor = ((clk_pll_setting & CLKC_PLL_FACTOR) >> 12) + 1; -+ -+ /* Check if we're in divide mode or multiply mode */ -+ if((clk_pll_setting & 0x1) == 0) -+ { -+ /* We're in divide mode */ -+ if(pll_factor < 0x10) -+ return (CEIL(base_freq >> 1, divider)); -+ else -+ return (CEIL(base_freq >> 2, divider)); -+ } -+ -+ else /* We're in PLL mode */ -+ { -+ /* See if PLLNDIV & PLLDIV are set */ -+ if((clk_pll_setting & 0x0800) && (clk_pll_setting & 0x2)) -+ { -+ if(clk_pll_setting & 0x1000) -+ { -+ /* clk = base_freq * k/2 */ -+ return(CEIL((base_freq * pll_factor) >> 1, divider)); -+ } -+ else -+ { -+ /* clk = base_freq * (k-1) / 4)*/ -+ return(CEIL((base_freq * (pll_factor - 1)) >>2, divider)); -+ } -+ } -+ else -+ { -+ if(pll_factor < 0x10) -+ { -+ /* clk = base_freq * k */ -+ return(CEIL(base_freq * pll_factor, divider)); -+ } -+ -+ else -+ { -+ /* clk = base_freq */ -+ return(CEIL(base_freq, divider)); -+ } -+ } -+ } -+ return(0); /* Should never reach here */ -+ -+ } -+ -+} -+ -+ -+/* local helper functions */ -+ -+/**************************************************************************** -+ * FUNCTION: get_base_frequency -+ **************************************************************************** -+ * Description: The above routine is called to get base frequency of the clocks. -+ ***************************************************************************/ -+ -+static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id) -+{ -+ /* update the current MIPs PLL output value, if the required -+ * source is MIPS PLL -+ */ -+ if ( clk_src[clk_id] == &mips_pll_out) -+ { -+ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_MIPS); -+ } -+ -+ -+ /* update the current System PLL output value, if the required -+ * source is system PLL -+ */ -+ if ( clk_src[clk_id] == &sys_pll_out) -+ { -+ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_SYS); -+ } -+ -+ return (*clk_src[clk_id]); -+ -+} -+ -+ -+ -+/**************************************************************************** -+ * FUNCTION: find_gcd -+ **************************************************************************** -+ * Description: The above routine is called to find gcd of 2 numbers. -+ ***************************************************************************/ -+static u32 find_gcd -+( -+ u32 min, -+ u32 max -+ ) -+{ -+ if (max % min == 0) -+ { -+ return min; -+ } -+ else -+ { -+ return find_gcd(max % min, min); -+ } -+} -+ -+/**************************************************************************** -+ * FUNCTION: compute_prediv -+ **************************************************************************** -+ * Description: The above routine is called to compute predivider value -+ ***************************************************************************/ -+static u32 compute_prediv(u32 divider, u32 min, u32 max) -+{ -+ u16 prediv; -+ -+ /* return the divider itself it it falls within the range of predivider*/ -+ if (min <= divider && divider <= max) -+ { -+ return divider; -+ } -+ -+ /* find a value for prediv such that it is a factor of divider */ -+ for (prediv = max; prediv >= min ; prediv--) -+ { -+ if ( (divider % prediv) == 0 ) -+ { -+ return prediv; -+ } -+ } -+ -+ /* No such factor exists, return min as prediv */ -+ return min; -+} -+ -+/**************************************************************************** -+ * FUNCTION: get_val -+ **************************************************************************** -+ * Description: This routine is called to get values of divider and multiplier. -+ ***************************************************************************/ -+ -+static void get_val(u32 output_freq, u32 base_freq,u32 *multiplier, u32 *divider) -+{ -+ u32 temp_mul; -+ u32 temp_div; -+ u32 gcd; -+ u32 min_freq; -+ u32 max_freq; -+ -+ /* find gcd of base_freq, output_freq */ -+ min_freq = (base_freq < output_freq) ? base_freq : output_freq; -+ max_freq = (base_freq > output_freq) ? base_freq : output_freq; -+ gcd = find_gcd(min_freq , max_freq); -+ -+ if(gcd == 0) -+ return; /* ERROR */ -+ -+ /* compute values of multiplier and divider */ -+ temp_mul = output_freq / gcd; -+ temp_div = base_freq / gcd; -+ -+ -+ /* set multiplier such that 1 <= multiplier <= PLL_MUL_MAXFACTOR */ -+ if( temp_mul > PLL_MUL_MAXFACTOR ) -+ { -+ if((temp_mul / temp_div) > PLL_MUL_MAXFACTOR) -+ return; -+ -+ find_approx(&temp_mul,&temp_div,base_freq); -+ } -+ -+ *multiplier = temp_mul; -+ *divider = temp_div; -+} -+ -+/**************************************************************************** -+ * FUNCTION: find_approx -+ **************************************************************************** -+ * Description: This function gets the approx value of num/denom. -+ ***************************************************************************/ -+ -+static void find_approx(u32 *num,u32 *denom,u32 base_freq) -+{ -+ u32 num1; -+ u32 denom1; -+ u32 num2; -+ u32 denom2; -+ int32_t closest; -+ int32_t prev_closest; -+ u32 temp_num; -+ u32 temp_denom; -+ u32 normalize; -+ u32 gcd; -+ u32 output_freq; -+ -+ num1 = *num; -+ denom1 = *denom; -+ -+ prev_closest = 0x7fffffff; /* maximum possible value */ -+ num2 = num1; -+ denom2 = denom1; -+ -+ /* start with max */ -+ for(temp_num = 15; temp_num >=1; temp_num--) -+ { -+ -+ temp_denom = CEIL(temp_num * denom1, num1); -+ output_freq = (temp_num * base_freq) / temp_denom; -+ -+ if(temp_denom < 1) -+ { -+ break; -+ } -+ else -+ { -+ normalize = CEIL(num1,temp_num); -+ closest = (ABS((num1 * (temp_denom) ) - (temp_num * denom1))) * normalize; -+ if(closest < prev_closest && output_freq > present_min && output_freq -+int avalanche_request_pacing(int irq_nr, unsigned int blk_num, unsigned int pace_value); -+#endif -+ -+ - EXPORT_SYMBOL(mips_machtype); - #ifdef CONFIG_EISA - EXPORT_SYMBOL(EISA_bus); -@@ -103,3 +109,10 @@ - #endif - - EXPORT_SYMBOL(get_wchan); -+ -+#ifdef CONFIG_AR7 -+EXPORT_SYMBOL_NOVERS(avalanche_request_pacing); -+EXPORT_SYMBOL_NOVERS(prom_getenv); -+EXPORT_SYMBOL_NOVERS(prom_iterenv); -+#endif -+ -diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c ---- linux.old/arch/mips/kernel/setup.c 2005-10-21 16:43:16.396956500 +0200 -+++ linux.dev/arch/mips/kernel/setup.c 2005-11-10 01:14:16.376732000 +0100 -@@ -38,6 +38,7 @@ - #include - #include - #include -+#include - - struct cpuinfo_mips cpu_data[NR_CPUS]; - EXPORT_SYMBOL(cpu_data); -@@ -88,7 +89,7 @@ - struct boot_mem_map boot_mem_map; - - unsigned char aux_device_present; --extern char _ftext, _etext, _fdata, _edata, _end; -+extern char _ftext, _etext, _fdata, _edata, _fbss, _end; - - static char command_line[CL_SIZE]; - char saved_command_line[CL_SIZE]; -@@ -116,6 +117,7 @@ - - static struct resource code_resource = { "Kernel code" }; - static struct resource data_resource = { "Kernel data" }; -+static struct resource bss_resource = { "Kernel bss" }; - - asmlinkage void __init - init_arch(int argc, char **argv, char **envp, int *prom_vec) -@@ -272,7 +274,7 @@ - for (i = 0; i < boot_mem_map.nr_map; i++) { - unsigned long start, end; - -- if (boot_mem_map.map[i].type != BOOT_MEM_RAM) -+ if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED) - continue; - - start = PFN_UP(boot_mem_map.map[i].addr); -@@ -320,7 +322,8 @@ - #endif - - /* Initialize the boot-time allocator with low memory only. */ -- bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn); -+ bootmap_size = init_bootmem_node(NODE_DATA(0), first_usable_pfn, -+ PFN_UP(PHYS_OFFSET), max_low_pfn); - - /* - * Register fully available low RAM pages with the bootmem allocator. -@@ -371,11 +374,12 @@ - continue; - - /* Register lowmem ranges */ -- free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size)); -+ free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn), -+ size< 0x0fffffff) { /* maximum for single J instruction */ -+ /* lui k0, 0x0000 */ -+ *(volatile u32 *)(KSEG0+0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(volatile u32 *)(KSEG0+0x204) = 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(volatile u32 *)(KSEG0+0x208) = 0x03400008; -+ /* nop */ -+ *(volatile u32 *)(KSEG0+0x20C) = 0x00000000; -+ flush_icache_range(KSEG0+0x200, KSEG0+0x210); -+ } else { - *(volatile u32 *)(KSEG0+0x200) = 0x08000000 | - (0x03ffffff & (handler >> 2)); -- flush_icache_range(KSEG0+0x200, KSEG0 + 0x204); -+ flush_icache_range(KSEG0+0x200, KSEG0+0x204); -+ } - } - return (void *)old_handler; - } -diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c ---- linux.old/arch/mips/mm/init.c 2004-02-18 14:36:30.000000000 +0100 -+++ linux.dev/arch/mips/mm/init.c 2005-11-10 01:14:16.376732000 +0100 -@@ -235,10 +235,13 @@ - #endif - } - -+#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) -+#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) -+ - void __init paging_init(void) - { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; -- unsigned long max_dma, high, low; -+ unsigned long max_dma, high, low, start; - - pagetable_init(); - -@@ -247,7 +250,8 @@ - #endif - - max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; -- low = max_low_pfn; -+ start = START_PFN; -+ low = MAX_LOW_PFN - start; - high = highend_pfn; - - #ifdef CONFIG_ISA -@@ -270,7 +274,8 @@ - zones_size[ZONE_HIGHMEM] = high - low; - #endif - -- free_area_init(zones_size); -+ free_area_init_node(0, NODE_DATA(0), 0, zones_size, -+ start << PAGE_SHIFT, 0); - } - - #define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT) -@@ -283,7 +288,7 @@ - for (i = 0; i < boot_mem_map.nr_map; i++) { - unsigned long addr, end; - -- if (boot_mem_map.map[i].type != BOOT_MEM_RAM) -+ if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED) - /* not usable memory */ - continue; - -@@ -313,16 +318,17 @@ - max_mapnr = num_physpages = highend_pfn; - num_mappedpages = max_low_pfn; - #else -- max_mapnr = num_mappedpages = num_physpages = max_low_pfn; -+ max_mapnr = num_mappedpages = num_physpages = MAX_LOW_PFN - START_PFN; - #endif -- high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); -- -- totalram_pages += free_all_bootmem(); -+ -+ high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE); -+ -+ totalram_pages += free_all_bootmem_node(NODE_DATA(0)); - totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */ - - reservedpages = ram = 0; -- for (tmp = 0; tmp < max_low_pfn; tmp++) -- if (page_is_ram(tmp)) { -+ for (tmp = 0; tmp < max_mapnr; tmp++) -+ if (page_is_ram(START_PFN + tmp)) { - ram++; - if (PageReserved(mem_map+tmp)) - reservedpages++; -@@ -377,13 +383,13 @@ - #endif - - extern char __init_begin, __init_end; --extern void prom_free_prom_memory(void) __init; -+extern unsigned long prom_free_prom_memory(void) __init; - - void free_initmem(void) - { - unsigned long addr; - -- prom_free_prom_memory (); -+ totalram_pages += prom_free_prom_memory (); - - addr = (unsigned long) &__init_begin; - while (addr < (unsigned long) &__init_end) { -diff -urN linux.old/drivers/char/Config.in linux.dev/drivers/char/Config.in ---- linux.old/drivers/char/Config.in 2005-10-21 16:43:16.440959250 +0200 -+++ linux.dev/drivers/char/Config.in 2005-11-10 01:10:45.843574500 +0100 -@@ -188,6 +188,14 @@ - tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL - fi - -+if [ "$CONFIG_AR7" = "y" ]; then -+ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ -+ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ -+ -+ define_int CONFIG_AR7_VLYNQ_PORTS 2 -+ tristate 'ADAM2 environment support (read-only)' CONFIG_AR7_ADAM2 -+fi -+ - source drivers/i2c/Config.in - - mainmenu_option next_comment -diff -urN linux.old/drivers/char/Config.in.orig linux.dev/drivers/char/Config.in.orig ---- linux.old/drivers/char/Config.in.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/Config.in.orig 2005-11-10 01:10:45.863575750 +0100 -@@ -0,0 +1,414 @@ -+# -+# Character device configuration -+# -+mainmenu_option next_comment -+comment 'Character devices' -+ -+bool 'Virtual terminal' CONFIG_VT -+if [ "$CONFIG_VT" = "y" ]; then -+ bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE -+ if [ "$CONFIG_GSC_LASI" = "y" ]; then -+ bool ' Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2 -+ fi -+fi -+tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL -+if [ "$CONFIG_SERIAL" = "y" ]; then -+ bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE -+ if [ "$CONFIG_GSC_LASI" = "y" ]; then -+ bool ' serial port on GSC support' CONFIG_SERIAL_GSC -+ fi -+ if [ "$CONFIG_IA64" = "y" ]; then -+ bool ' Support for serial port described by EFI HCDP table' CONFIG_SERIAL_HCDP -+ fi -+ if [ "$CONFIG_ARCH_ACORN" = "y" ]; then -+ tristate ' Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL -+ tristate ' Dual serial port support' CONFIG_DUALSP_SERIAL -+ fi -+fi -+dep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIAL -+if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then -+ bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS -+ bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ -+ bool ' Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ -+ bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT -+ bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6 -+fi -+bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD -+if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then -+ tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE -+ tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT -+ tristate ' Cyclades async mux support' CONFIG_CYCLADES -+ if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then -+ bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR -+ fi -+ if [ "$CONFIG_X86_64" != "y" ]; then -+ tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA -+ if [ "$CONFIG_DIGIEPCA" = "n" ]; then -+ tristate ' Digiboard PC/Xx Support' CONFIG_DIGI -+ fi -+ fi -+ dep_tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA -+ tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO -+ tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO -+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then -+ dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m -+ fi -+ tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK -+ tristate ' SyncLink Multiport support' CONFIG_SYNCLINKMP -+ tristate ' HDLC line discipline support' CONFIG_N_HDLC -+ tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8 -+ if [ "$CONFIG_X86_64" != "y" ]; then -+ tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX -+ if [ "$CONFIG_SPECIALIX" != "n" ]; then -+ bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS -+ fi -+ tristate ' Specialix SX (and SI) card support' CONFIG_SX -+ tristate ' Specialix RIO system support' CONFIG_RIO -+ if [ "$CONFIG_RIO" != "n" ]; then -+ bool ' Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI -+ fi -+ fi -+ bool ' Stallion multiport serial support' CONFIG_STALDRV -+ if [ "$CONFIG_STALDRV" = "y" ]; then -+ tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION -+ tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION -+ fi -+ if [ "$CONFIG_PARISC" = "y" ]; then -+ if [ "$CONFIG_PDC_CONSOLE" != "y" ]; then -+ bool ' Serial MUX support' CONFIG_SERIAL_MUX CONFIG_SERIAL_NONSTANDARD -+ fi -+ if [ "$CONFIG_SERIAL_MUX" != "y" ]; then -+ bool ' PDC software console support' CONFIG_PDC_CONSOLE CONFIG_SERIAL_NONSTANDARD -+ fi -+ fi -+ if [ "$CONFIG_MIPS" = "y" ]; then -+ bool ' TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912 -+ dep_bool ' Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912 -+ bool ' TMPTX39XX/49XX serial port support' CONFIG_SERIAL_TXX9 -+ dep_bool ' Console on TMPTX39XX/49XX serial port' CONFIG_SERIAL_TXX9_CONSOLE $CONFIG_SERIAL_TXX9 -+ if [ "$CONFIG_SOC_AU1X00" = "y" ]; then -+ bool ' Enable Au1x00 UART Support' CONFIG_AU1X00_UART -+ if [ "$CONFIG_AU1X00_UART" = "y" ]; then -+ bool ' Enable Au1x00 serial console' CONFIG_AU1X00_SERIAL_CONSOLE -+ fi -+ dep_tristate ' Au1x00 USB TTY Device support' CONFIG_AU1X00_USB_TTY $CONFIG_SOC_AU1X00 -+ if [ "$CONFIG_AU1000_USB_TTY" != "y" ]; then -+ dep_tristate ' Au1x00 USB Raw Device support' CONFIG_AU1X00_USB_RAW $CONFIG_SOC_AU1X00 -+ fi -+ if [ "$CONFIG_AU1X00_USB_TTY" != "n" -o \ -+ "$CONFIG_AU1X00_USB_RAW" != "n" ]; then -+ define_bool CONFIG_AU1X00_USB_DEVICE y -+ fi -+ fi -+ bool ' TXx927 SIO support' CONFIG_TXX927_SERIAL -+ if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then -+ bool ' TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE -+ fi -+ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then -+ bool ' Support for BCM1xxx onchip DUART' CONFIG_SIBYTE_SB1250_DUART -+ if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then -+ bool ' Console on BCM1xxx DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE -+ if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then -+ define_bool CONFIG_SERIAL_CONSOLE y -+ fi -+ fi -+ fi -+ fi -+ if [ "$CONFIG_DECSTATION" = "y" ]; then -+ bool ' DECstation serial support' CONFIG_SERIAL_DEC -+ dep_bool ' Support for console on a DECstation serial port' CONFIG_SERIAL_DEC_CONSOLE $CONFIG_SERIAL_DEC -+ dep_bool ' DZ11 serial support' CONFIG_DZ $CONFIG_SERIAL_DEC $CONFIG_MIPS32 -+ dep_bool ' Z85C30 serial support' CONFIG_ZS $CONFIG_SERIAL_DEC $CONFIG_TC -+ fi -+ if [ "$CONFIG_SGI_IP22" = "y" ]; then -+ bool ' SGI Zilog85C30 serial support' CONFIG_IP22_SERIAL -+ fi -+ if [ "$CONFIG_IA64" = "y" ]; then -+ bool ' SGI SN2 l1 serial port support' CONFIG_SGI_L1_SERIAL -+ if [ "$CONFIG_SGI_L1_SERIAL" = "y" ]; then -+ bool ' SGI SN2 l1 Console support' CONFIG_SGI_L1_SERIAL_CONSOLE -+ fi -+ if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ]; then -+ bool ' SGI SN2 IOC4 serial port support' CONFIG_SGI_IOC4_SERIAL -+ fi -+ fi -+fi -+if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then -+ tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232 -+fi -+if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then -+ bool 'DC21285 serial port support' CONFIG_SERIAL_21285 -+ if [ "$CONFIG_SERIAL_21285" = "y" ]; then -+ if [ "$CONFIG_OBSOLETE" = "y" ]; then -+ bool ' Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD -+ fi -+ bool ' Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE -+ fi -+ if [ "$CONFIG_PARISC" = "y" ]; then -+ bool ' PDC software console support' CONFIG_PDC_CONSOLE -+ fi -+fi -+if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then -+ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD -+ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then -+ define_bool CONFIG_IT8172_CIR y -+ else -+ bool ' Enable PS2 Keyboard Support' CONFIG_PC_KEYB -+ fi -+ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0 -+ bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1 -+fi -+if [ "$CONFIG_MIPS_IVR" = "y" ]; then -+ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD -+ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then -+ define_bool CONFIG_IT8172_CIR y -+ fi -+ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0 -+fi -+if [ "$CONFIG_CPU_VR41XX" = "y" ]; then -+ bool 'NEC VR4100 series Keyboard Interface Unit Support ' CONFIG_VR41XX_KIU -+fi -+bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS -+if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then -+ int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256 -+fi -+if [ "$CONFIG_PARPORT" != "n" ]; then -+ dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT -+ if [ "$CONFIG_PRINTER" != "n" ]; then -+ bool ' Support for console on line printer' CONFIG_LP_CONSOLE -+ fi -+ dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT -+ dep_tristate 'Texas Instruments parallel link cable support' CONFIG_TIPAR $CONFIG_PARPORT -+fi -+ -+if [ "$CONFIG_PPC64" = "y" ] ; then -+ bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLE -+fi -+if [ "$CONFIG_ALL_PPC" = "y" ]; then -+ tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL -+fi -+ -+if [ "$CONFIG_AR7" = "y" ]; then -+ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ -+ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ -+ -+ define_int CONFIG_AR7_VLYNQ_PORTS 2 -+fi -+ -+source drivers/i2c/Config.in -+ -+mainmenu_option next_comment -+comment 'Mice' -+tristate 'Bus Mouse Support' CONFIG_BUSMOUSE -+if [ "$CONFIG_BUSMOUSE" != "n" ]; then -+ dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE -+ dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE -+ dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE -+ if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then -+ dep_tristate ' Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE -+ fi -+# if [ "$CONFIG_DECSTATION" = "y" ]; then -+# dep_bool ' MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS -+# fi -+fi -+ -+tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE -+if [ "$CONFIG_MOUSE" != "n" ]; then -+ bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE -+ tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE -+ tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD -+ tristate ' MK712 touch screen support' CONFIG_MK712_MOUSE -+fi -+endmenu -+ -+source drivers/char/joystick/Config.in -+ -+tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE -+if [ "$CONFIG_QIC02_TAPE" != "n" ]; then -+ bool ' Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF -+ if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then -+ comment ' Edit configuration parameters in ./include/linux/tpqic02.h!' -+ else -+ comment ' Setting runtime QIC-02 configuration is done with qic02conf' -+ comment ' from the tpqic02-support package. It is available at' -+ comment ' metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/' -+ fi -+fi -+ -+tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER -+dep_mbool ' Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER -+dep_tristate ' Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER -+dep_tristate ' IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER -+dep_tristate ' IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER -+ -+mainmenu_option next_comment -+comment 'Watchdog Cards' -+bool 'Watchdog Timer Support' CONFIG_WATCHDOG -+if [ "$CONFIG_WATCHDOG" != "n" ]; then -+ bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT -+ tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT -+ tristate ' Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT -+ tristate ' ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT -+ tristate ' ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT -+ tristate ' AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT -+ tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG -+ if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then -+ tristate ' DC21285 watchdog' CONFIG_21285_WATCHDOG -+ if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then -+ tristate ' NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG -+ fi -+ fi -+ tristate ' Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT -+ tristate ' IB700 SBC Watchdog Timer' CONFIG_IB700_WDT -+ tristate ' ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT -+ tristate ' Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO -+ tristate ' Mixcom Watchdog' CONFIG_MIXCOMWD -+ tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT -+ dep_tristate ' SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL -+ tristate ' NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT -+ tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG -+ tristate ' W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT -+ tristate ' WDT Watchdog timer' CONFIG_WDT -+ tristate ' WDT PCI Watchdog timer' CONFIG_WDTPCI -+ if [ "$CONFIG_WDT" != "n" ]; then -+ bool ' WDT501 features' CONFIG_WDT_501 -+ if [ "$CONFIG_WDT_501" = "y" ]; then -+ bool ' Fan Tachometer' CONFIG_WDT_501_FAN -+ fi -+ fi -+ tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT -+ if [ "$CONFIG_SGI_IP22" = "y" ]; then -+ dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22 -+ fi -+ if [ "$CONFIG_8xx" = "y" ]; then -+ tristate ' MPC8xx Watchdog Timer' CONFIG_8xx_WDT -+ fi -+fi -+endmenu -+ -+if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then -+ tristate 'NetWinder thermometer support' CONFIG_DS1620 -+ tristate 'NetWinder Button' CONFIG_NWBUTTON -+ if [ "$CONFIG_NWBUTTON" != "n" ]; then -+ bool ' Reboot Using Button' CONFIG_NWBUTTON_REBOOT -+ fi -+ tristate 'NetWinder flash support' CONFIG_NWFLASH -+fi -+tristate 'NatSemi SCx200 Support' CONFIG_SCx200 -+dep_tristate ' NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200 -+ -+if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then -+ bool 'SGI SN2 fetchop support' CONFIG_FETCHOP -+fi -+ -+if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then -+ dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI -+fi -+if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then -+ dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI -+fi -+if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o \ -+ "$CONFIG_X86_64" = "y" ]; then -+ dep_tristate 'Intel/AMD/VIA HW Random Number Generator support' CONFIG_HW_RANDOM $CONFIG_PCI -+fi -+dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI -+tristate '/dev/nvram support' CONFIG_NVRAM -+tristate 'Enhanced Real Time Clock Support' CONFIG_RTC -+if [ "$CONFIG_IA64" = "y" ]; then -+ bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC -+fi -+if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then -+ bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8 -+fi -+if [ "$CONFIG_SGI_IP22" = "y" ]; then -+ tristate 'Dallas DS1286 RTC support' CONFIG_DS1286 -+fi -+if [ "$CONFIG_SGI_IP27" = "y" ]; then -+ tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC -+fi -+if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then -+ tristate 'Dallas DS1742 RTC support' CONFIG_DS1742 -+fi -+ -+tristate 'Double Talk PC internal speech card support' CONFIG_DTLK -+tristate 'Siemens R3964 line discipline' CONFIG_R3964 -+tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM -+if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then -+ dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI -+fi -+ -+mainmenu_option next_comment -+comment 'Ftape, the floppy tape device driver' -+tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE -+if [ "$CONFIG_FTAPE" != "n" ]; then -+ source drivers/char/ftape/Config.in -+fi -+ -+endmenu -+ -+if [ "$CONFIG_GART_IOMMU" = "y" ]; then -+ bool '/dev/agpgart (AGP Support)' CONFIG_AGP -+ define_bool CONFIG_AGP_AMD_K8 y -+else -+ tristate '/dev/agpgart (AGP Support)' CONFIG_AGP -+fi -+if [ "$CONFIG_AGP" != "n" ]; then -+ bool ' Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL -+ bool ' Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810 -+ bool ' VIA chipset support' CONFIG_AGP_VIA -+ bool ' AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD -+ if [ "$CONFIG_GART_IOMMU" != "y" ]; then -+ bool ' AMD Opteron/Athlon64 on-CPU GART support' CONFIG_AGP_AMD_K8 -+ fi -+ bool ' Generic SiS support' CONFIG_AGP_SIS -+ bool ' ALI chipset support' CONFIG_AGP_ALI -+ bool ' Serverworks LE/HE support' CONFIG_AGP_SWORKS -+ if [ "$CONFIG_X86" = "y" ]; then -+ bool ' NVIDIA chipset support' CONFIG_AGP_NVIDIA -+ fi -+ if [ "$CONFIG_IA64" = "y" ]; then -+ bool ' Intel 460GX support' CONFIG_AGP_I460 -+ bool ' HP ZX1 AGP support' CONFIG_AGP_HP_ZX1 -+ fi -+ bool ' ATI IGP chipset support' CONFIG_AGP_ATI -+fi -+ -+mainmenu_option next_comment -+comment 'Direct Rendering Manager (XFree86 DRI support)' -+bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM -+if [ "$CONFIG_DRM" = "y" ]; then -+ bool ' Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD -+ if [ "$CONFIG_DRM_OLD" = "y" ]; then -+ comment 'DRM 4.0 drivers' -+ source drivers/char/drm-4.0/Config.in -+ else -+ comment 'DRM 4.1 drivers' -+ define_bool CONFIG_DRM_NEW y -+ source drivers/char/drm/Config.in -+ fi -+fi -+ -+if [ "$CONFIG_X86" = "y" ]; then -+ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE -+fi -+ -+endmenu -+ -+if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then -+ source drivers/char/pcmcia/Config.in -+fi -+if [ "$CONFIG_SOC_AU1X00" = "y" ]; then -+ tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO -+ tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846 -+ #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI -+fi -+if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then -+ tristate ' ITE GPIO' CONFIG_ITE_GPIO -+fi -+ -+if [ "$CONFIG_X86" = "y" ]; then -+ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE -+ dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE $CONFIG_INPUT_MOUSEDEV -+fi -+ -+endmenu -diff -urN linux.old/drivers/char/Makefile linux.dev/drivers/char/Makefile ---- linux.old/drivers/char/Makefile 2005-10-21 16:43:16.460960500 +0200 -+++ linux.dev/drivers/char/Makefile 2005-11-10 01:10:45.871576250 +0100 -@@ -240,6 +240,13 @@ - obj-y += joystick/js.o - endif - -+# -+# Texas Intruments VLYNQ driver -+# -+ -+subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq -+obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o -+ - obj-$(CONFIG_FETCHOP) += fetchop.o - obj-$(CONFIG_BUSMOUSE) += busmouse.o - obj-$(CONFIG_DTLK) += dtlk.o -@@ -340,6 +347,11 @@ - obj-y += ipmi/ipmi.o - endif - -+subdir-$(CONFIG_AR7_ADAM2) += ticfg -+ifeq ($(CONFIG_AR7_ADAM2),y) -+ obj-y += ticfg/ticfg.o -+endif -+ - include $(TOPDIR)/Rules.make - - fastdep: -diff -urN linux.old/drivers/char/Makefile.orig linux.dev/drivers/char/Makefile.orig ---- linux.old/drivers/char/Makefile.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/Makefile.orig 2005-11-10 01:10:45.871576250 +0100 -@@ -0,0 +1,374 @@ -+# -+# Makefile for the kernel character device drivers. -+# -+# Note! Dependencies are done automagically by 'make dep', which also -+# removes any old dependencies. DON'T put your own dependencies here -+# unless it's something special (ie not a .c file). -+# -+# Note 2! The CFLAGS definitions are now inherited from the -+# parent makes.. -+# -+ -+# -+# This file contains the font map for the default (hardware) font -+# -+FONTMAPFILE = cp437.uni -+ -+O_TARGET := char.o -+ -+obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o -+ -+# All of the (potential) objects that export symbols. -+# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'. -+ -+export-objs := busmouse.o console.o keyboard.o sysrq.o \ -+ misc.o pty.o random.o selection.o serial.o \ -+ sonypi.o tty_io.o tty_ioctl.o generic_serial.o \ -+ au1000_gpio.o vac-serial.o hp_psaux.o nvram.o \ -+ scx200.o fetchop.o -+ -+mod-subdirs := joystick ftape drm drm-4.0 pcmcia -+ -+list-multi := -+ -+KEYMAP =defkeymap.o -+KEYBD =pc_keyb.o -+CONSOLE =console.o -+SERIAL =serial.o -+ -+ifeq ($(ARCH),s390) -+ KEYMAP = -+ KEYBD = -+ CONSOLE = -+ SERIAL = -+endif -+ -+ifeq ($(ARCH),mips) -+ ifneq ($(CONFIG_PC_KEYB),y) -+ KEYBD = -+ endif -+ ifeq ($(CONFIG_VR41XX_KIU),y) -+ ifeq ($(CONFIG_IBM_WORKPAD),y) -+ KEYMAP = ibm_workpad_keymap.o -+ endif -+ ifeq ($(CONFIG_VICTOR_MPC30X),y) -+ KEYMAP = victor_mpc30x_keymap.o -+ endif -+ KEYBD = vr41xx_keyb.o -+ endif -+endif -+ -+ifeq ($(ARCH),s390x) -+ KEYMAP = -+ KEYBD = -+ CONSOLE = -+ SERIAL = -+endif -+ -+ifeq ($(ARCH),m68k) -+ ifdef CONFIG_AMIGA -+ KEYBD = amikeyb.o -+ else -+ ifndef CONFIG_MAC -+ KEYBD = -+ endif -+ endif -+ SERIAL = -+endif -+ -+ifeq ($(ARCH),parisc) -+ ifdef CONFIG_GSC_PS2 -+ KEYBD = hp_psaux.o hp_keyb.o -+ else -+ KEYBD = -+ endif -+ ifdef CONFIG_SERIAL_MUX -+ CONSOLE += mux.o -+ endif -+ ifdef CONFIG_PDC_CONSOLE -+ CONSOLE += pdc_console.o -+ endif -+endif -+ -+ifdef CONFIG_Q40 -+ KEYBD += q40_keyb.o -+ SERIAL = serial.o -+endif -+ -+ifdef CONFIG_APOLLO -+ KEYBD += dn_keyb.o -+endif -+ -+ifeq ($(ARCH),parisc) -+ ifdef CONFIG_GSC_PS2 -+ KEYBD = hp_psaux.o hp_keyb.o -+ else -+ KEYBD = -+ endif -+ ifdef CONFIG_PDC_CONSOLE -+ CONSOLE += pdc_console.o -+ endif -+endif -+ -+ifeq ($(ARCH),arm) -+ ifneq ($(CONFIG_PC_KEYMAP),y) -+ KEYMAP = -+ endif -+ ifneq ($(CONFIG_PC_KEYB),y) -+ KEYBD = -+ endif -+endif -+ -+ifeq ($(ARCH),sh) -+ KEYMAP = -+ KEYBD = -+ CONSOLE = -+ ifeq ($(CONFIG_SH_HP600),y) -+ KEYMAP = defkeymap.o -+ KEYBD = scan_keyb.o hp600_keyb.o -+ CONSOLE = console.o -+ endif -+ ifeq ($(CONFIG_SH_DMIDA),y) -+ # DMIDA does not connect the HD64465 PS/2 keyboard port -+ # but we allow for USB keyboards to be plugged in. -+ KEYMAP = defkeymap.o -+ KEYBD = # hd64465_keyb.o pc_keyb.o -+ CONSOLE = console.o -+ endif -+ ifeq ($(CONFIG_SH_EC3104),y) -+ KEYMAP = defkeymap.o -+ KEYBD = ec3104_keyb.o -+ CONSOLE = console.o -+ endif -+ ifeq ($(CONFIG_SH_DREAMCAST),y) -+ KEYMAP = defkeymap.o -+ KEYBD = -+ CONSOLE = console.o -+ endif -+endif -+ -+ifeq ($(CONFIG_DECSTATION),y) -+ KEYMAP = -+ KEYBD = -+endif -+ -+ifeq ($(CONFIG_BAGET_MIPS),y) -+ KEYBD = -+ SERIAL = vac-serial.o -+endif -+ -+ifeq ($(CONFIG_NINO),y) -+ SERIAL = -+endif -+ -+ifneq ($(CONFIG_SUN_SERIAL),) -+ SERIAL = -+endif -+ -+ifeq ($(CONFIG_QTRONIX_KEYBOARD),y) -+ KEYBD = qtronix.o -+ KEYMAP = qtronixmap.o -+endif -+ -+ifeq ($(CONFIG_DUMMY_KEYB),y) -+ KEYBD = dummy_keyb.o -+endif -+ -+obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o -+obj-$(CONFIG_SERIAL) += $(SERIAL) -+obj-$(CONFIG_PARPORT_SERIAL) += parport_serial.o -+obj-$(CONFIG_SERIAL_HCDP) += hcdp_serial.o -+obj-$(CONFIG_SERIAL_21285) += serial_21285.o -+obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o -+obj-$(CONFIG_SERIAL_AMBA) += serial_amba.o -+obj-$(CONFIG_TS_AU1X00_ADS7846) += au1000_ts.o -+obj-$(CONFIG_SERIAL_DEC) += decserial.o -+ -+ifndef CONFIG_SUN_KEYBOARD -+ obj-$(CONFIG_VT) += keyboard.o $(KEYMAP) $(KEYBD) -+else -+ obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP) -+endif -+ -+obj-$(CONFIG_HIL) += hp_keyb.o -+obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o -+obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o -+obj-$(CONFIG_ROCKETPORT) += rocket.o -+obj-$(CONFIG_MOXA_SMARTIO) += mxser.o -+obj-$(CONFIG_MOXA_INTELLIO) += moxa.o -+obj-$(CONFIG_DIGI) += pcxx.o -+obj-$(CONFIG_DIGIEPCA) += epca.o -+obj-$(CONFIG_CYCLADES) += cyclades.o -+obj-$(CONFIG_STALLION) += stallion.o -+obj-$(CONFIG_ISTALLION) += istallion.o -+obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o -+obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o -+obj-$(CONFIG_RISCOM8) += riscom8.o -+obj-$(CONFIG_ISI) += isicom.o -+obj-$(CONFIG_ESPSERIAL) += esp.o -+obj-$(CONFIG_SYNCLINK) += synclink.o -+obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o -+obj-$(CONFIG_N_HDLC) += n_hdlc.o -+obj-$(CONFIG_SPECIALIX) += specialix.o -+obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o -+obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o -+obj-$(CONFIG_SX) += sx.o generic_serial.o -+obj-$(CONFIG_RIO) += rio/rio.o generic_serial.o -+obj-$(CONFIG_SH_SCI) += sh-sci.o generic_serial.o -+obj-$(CONFIG_SERIAL167) += serial167.o -+obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o -+obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o -+obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o -+obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o -+obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o -+obj-$(CONFIG_TXX927_SERIAL) += serial_txx927.o -+obj-$(CONFIG_SERIAL_TXX9) += generic_serial.o serial_txx9.o -+obj-$(CONFIG_IP22_SERIAL) += sgiserial.o -+obj-$(CONFIG_AU1X00_UART) += au1x00-serial.o -+obj-$(CONFIG_SGI_L1_SERIAL) += sn_serial.o -+ -+subdir-$(CONFIG_RIO) += rio -+subdir-$(CONFIG_INPUT) += joystick -+ -+obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o -+obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o -+obj-$(CONFIG_PRINTER) += lp.o -+obj-$(CONFIG_TIPAR) += tipar.o -+obj-$(CONFIG_OBMOUSE) += obmouse.o -+ -+ifeq ($(CONFIG_INPUT),y) -+obj-y += joystick/js.o -+endif -+ -+# -+# Texas Intruments VLYNQ driver -+# -+ -+subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq -+obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o -+ -+obj-$(CONFIG_FETCHOP) += fetchop.o -+obj-$(CONFIG_BUSMOUSE) += busmouse.o -+obj-$(CONFIG_DTLK) += dtlk.o -+obj-$(CONFIG_R3964) += n_r3964.o -+obj-$(CONFIG_APPLICOM) += applicom.o -+obj-$(CONFIG_SONYPI) += sonypi.o -+obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o -+obj-$(CONFIG_82C710_MOUSE) += qpmouse.o -+obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o -+obj-$(CONFIG_ATARIMOUSE) += atarimouse.o -+obj-$(CONFIG_ADBMOUSE) += adbmouse.o -+obj-$(CONFIG_PC110_PAD) += pc110pad.o -+obj-$(CONFIG_MK712_MOUSE) += mk712.o -+obj-$(CONFIG_RTC) += rtc.o -+obj-$(CONFIG_GEN_RTC) += genrtc.o -+obj-$(CONFIG_EFI_RTC) += efirtc.o -+obj-$(CONFIG_MIPS_RTC) += mips_rtc.o -+obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o -+ifeq ($(CONFIG_PPC),) -+ obj-$(CONFIG_NVRAM) += nvram.o -+endif -+obj-$(CONFIG_TOSHIBA) += toshiba.o -+obj-$(CONFIG_I8K) += i8k.o -+obj-$(CONFIG_DS1286) += ds1286.o -+obj-$(CONFIG_DS1620) += ds1620.o -+obj-$(CONFIG_DS1742) += ds1742.o -+obj-$(CONFIG_INTEL_RNG) += i810_rng.o -+obj-$(CONFIG_AMD_RNG) += amd768_rng.o -+obj-$(CONFIG_HW_RANDOM) += hw_random.o -+obj-$(CONFIG_AMD_PM768) += amd76x_pm.o -+obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o -+ -+obj-$(CONFIG_ITE_GPIO) += ite_gpio.o -+obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o -+obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o -+obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o -+obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o -+obj-$(CONFIG_COBALT_LCD) += lcd.o -+ -+obj-$(CONFIG_QIC02_TAPE) += tpqic02.o -+ -+subdir-$(CONFIG_FTAPE) += ftape -+subdir-$(CONFIG_DRM_OLD) += drm-4.0 -+subdir-$(CONFIG_DRM_NEW) += drm -+subdir-$(CONFIG_PCMCIA) += pcmcia -+subdir-$(CONFIG_AGP) += agp -+ -+ifeq ($(CONFIG_FTAPE),y) -+obj-y += ftape/ftape.o -+endif -+ -+obj-$(CONFIG_H8) += h8.o -+obj-$(CONFIG_PPDEV) += ppdev.o -+obj-$(CONFIG_DZ) += dz.o -+obj-$(CONFIG_NWBUTTON) += nwbutton.o -+obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_SCx200) += scx200.o -+obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o -+ -+# Only one watchdog can succeed. We probe the hardware watchdog -+# drivers first, then the softdog driver. This means if your hardware -+# watchdog dies or is 'borrowed' for some reason the software watchdog -+# still gives you some cover. -+ -+obj-$(CONFIG_PCWATCHDOG) += pcwd.o -+obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o -+obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o -+obj-$(CONFIG_IB700_WDT) += ib700wdt.o -+obj-$(CONFIG_MIXCOMWD) += mixcomwd.o -+obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o -+obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o -+obj-$(CONFIG_SC520_WDT) += sc520_wdt.o -+obj-$(CONFIG_WDT) += wdt.o -+obj-$(CONFIG_WDTPCI) += wdt_pci.o -+obj-$(CONFIG_21285_WATCHDOG) += wdt285.o -+obj-$(CONFIG_977_WATCHDOG) += wdt977.o -+obj-$(CONFIG_I810_TCO) += i810-tco.o -+obj-$(CONFIG_MACHZ_WDT) += machzwd.o -+obj-$(CONFIG_SH_WDT) += shwdt.o -+obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o -+obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o -+obj-$(CONFIG_ALIM1535_WDT) += alim1535d_wdt.o -+obj-$(CONFIG_INDYDOG) += indydog.o -+obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o -+obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o -+obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o -+obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o -+obj-$(CONFIG_INDYDOG) += indydog.o -+obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o -+ -+subdir-$(CONFIG_MWAVE) += mwave -+ifeq ($(CONFIG_MWAVE),y) -+ obj-y += mwave/mwave.o -+endif -+ -+subdir-$(CONFIG_IPMI_HANDLER) += ipmi -+ifeq ($(CONFIG_IPMI_HANDLER),y) -+ obj-y += ipmi/ipmi.o -+endif -+ -+include $(TOPDIR)/Rules.make -+ -+fastdep: -+ -+conmakehash: conmakehash.c -+ $(HOSTCC) $(HOSTCFLAGS) -o conmakehash conmakehash.c -+ -+consolemap_deftbl.c: $(FONTMAPFILE) conmakehash -+ ./conmakehash $(FONTMAPFILE) > consolemap_deftbl.c -+ -+consolemap_deftbl.o: consolemap_deftbl.c $(TOPDIR)/include/linux/types.h -+ -+.DELETE_ON_ERROR: -+ -+defkeymap.c: defkeymap.map -+ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ -+ -+qtronixmap.c: qtronixmap.map -+ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ -+ -+ibm_workpad_keymap.c: ibm_workpad_keymap.map -+ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ -+ -+victor_mpc30x_keymap.c: victor_mpc30x_keymap.map -+ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ -diff -urN linux.old/drivers/char/avalanche_vlynq/Makefile linux.dev/drivers/char/avalanche_vlynq/Makefile ---- linux.old/drivers/char/avalanche_vlynq/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_vlynq/Makefile 2005-11-10 01:10:45.871576250 +0100 -@@ -0,0 +1,16 @@ -+# -+# Makefile for the linux kernel. -+# -+# Note! Dependencies are done automagically by 'make dep', which also -+# removes any old dependencies. DON'T put your own dependencies here -+# unless it's something special (ie not a .c file). -+# -+# Note 2! The CFLAGS definitions are now in the main makefile... -+ -+O_TARGET := avalanche_vlynq.o -+ -+export-objs := vlynq_board.o -+ -+obj-y += vlynq_drv.o vlynq_hal.o vlynq_board.o -+ -+include $(TOPDIR)/Rules.make -diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_board.c linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c ---- linux.old/drivers/char/avalanche_vlynq/vlynq_board.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c 2005-11-10 01:10:45.871576250 +0100 -@@ -0,0 +1,184 @@ -+/* -+ * Jeff Harrell, jharrell@ti.com -+ * Copyright (C) 2001 Texas Instruments, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * Texas Instruments Sangam specific setup. -+ */ -+#include -+#include -+#include -+#include -+#include -+ -+#define SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR 30 /* MSB - 1 bit */ -+#define SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR 31 /* MSB bit */ -+#define SYS_VLYNQ_OPTIONS 0x7F; /* all options*/ -+ -+/* These defines are board specific */ -+ -+ -+#define VLYNQ0_REMOTE_WINDOW1_OFFSET (0x0C000000) -+#define VLYNQ0_REMOTE_WINDOW1_SIZE (0x500) -+ -+ -+#define VLYNQ1_REMOTE_WINDOW1_OFFSET (0x0C000000) -+#define VLYNQ1_REMOTE_WINDOW1_SIZE (0x500) -+ -+ -+extern VLYNQ_DEV vlynqDevice0, vlynqDevice1; -+int vlynq_init_status[2] = {0, 0}; -+EXPORT_SYMBOL(vlynq_init_status); -+static int reset_hack = 1; -+ -+void vlynq_ar7wrd_dev_init() -+{ -+ *(unsigned long*) AVALANCHE_GPIO_ENBL |= (1<<18); -+ vlynq_delay(20000); -+ *(unsigned long*) AVALANCHE_GPIO_DIR &= ~(1<<18); -+ vlynq_delay(20000); -+ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT&= ~(1<<18); -+ vlynq_delay(50000); -+ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT|= (1<<18); -+ vlynq_delay(50000); -+ -+ /* Initialize the MIPS host vlynq driver for a given vlynq interface */ -+ vlynqDevice0.dev_idx = 0; /* first vlynq module - this parameter is for reference only */ -+ vlynqDevice0.module_base = AVALANCHE_LOW_VLYNQ_CONTROL_BASE; /* vlynq0 module base address */ -+ -+#if defined(CONFIG_VLYNQ_CLK_LOCAL) -+ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_LOCAL; -+#else -+ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_REMOTE; -+#endif -+ vlynqDevice0.clk_div = 0x01; /* board/hardware specific */ -+ vlynqDevice0.state = VLYNQ_DRV_STATE_UNINIT; /* uninitialized module */ -+ -+ /* Populate vlynqDevice0.local_mem & Vlynq0.remote_mem based on system configuration */ -+ /*Local memory configuration */ -+ -+ /* Demiurg : not good !*/ -+#if 0 -+ vlynqDevice0.local_mem.Txmap= AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE & ~(0xc0000000) ; /* physical address */ -+ vlynqDevice0.remote_mem.RxOffset[0]= VLYNQ0_REMOTE_WINDOW1_OFFSET; /* This is specific to the board on the other end */ -+ vlynqDevice0.remote_mem.RxSize[0]=VLYNQ0_REMOTE_WINDOW1_SIZE; -+#endif -+ -+ /* Demiurg : This is how it should be ! */ -+ vlynqDevice0.local_mem.Txmap = PHYSADDR(AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE); -+#define VLYNQ_ACX111_MEM_OFFSET 0xC0000000 /* Physical address of ACX111 memory */ -+#define VLYNQ_ACX111_MEM_SIZE 0x00040000 /* Total size of the ACX111 memory */ -+#define VLYNQ_ACX111_REG_OFFSET 0xF0000000 /* PHYS_ADDR of ACX111 control registers */ -+#define VLYNQ_ACX111_REG_SIZE 0x00022000 /* Size of ACX111 registers area, MAC+PHY */ -+#define ACX111_VL1_REMOTE_SIZE 0x1000000 -+ vlynqDevice0.remote_mem.RxOffset[0] = VLYNQ_ACX111_MEM_OFFSET; -+ vlynqDevice0.remote_mem.RxSize[0] = VLYNQ_ACX111_MEM_SIZE ; -+ vlynqDevice0.remote_mem.RxOffset[1] = VLYNQ_ACX111_REG_OFFSET; -+ vlynqDevice0.remote_mem.RxSize[1] = VLYNQ_ACX111_REG_SIZE ; -+ vlynqDevice0.remote_mem.Txmap = 0; -+ vlynqDevice0.local_mem.RxOffset[0] = AVALANCHE_SDRAM_BASE; -+ vlynqDevice0.local_mem.RxSize[0] = ACX111_VL1_REMOTE_SIZE; -+ -+ -+ /* Local interrupt configuration */ -+ vlynqDevice0.local_irq.intLocal = VLYNQ_INT_LOCAL; /* Host handles vlynq interrupts*/ -+ vlynqDevice0.local_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* vlynq root isr used */ -+ vlynqDevice0.local_irq.map_vector = SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR; -+ vlynqDevice0.local_irq.intr_ptr = 0; /* Since remote interrupts part of vlynq root isr this is unused */ -+ -+ /* Remote interrupt configuration */ -+ vlynqDevice0.remote_irq.intLocal = VLYNQ_INT_REMOTE; /* MIPS handles interrupts */ -+ vlynqDevice0.remote_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* Not significant since MIPS handles interrupts */ -+ vlynqDevice0.remote_irq.map_vector = SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR; -+ vlynqDevice0. remote_irq.intr_ptr = AVALANCHE_INTC_BASE; /* Not significant since MIPS handles interrupts */ -+ -+ if(reset_hack != 1) -+ printk("About to re-init the VLYNQ.\n"); -+ -+ if(vlynq_init(&vlynqDevice0,VLYNQ_INIT_PERFORM_ALL)== 0) -+ { -+ /* Suraj added the following to keep the 1130 going. */ -+ vlynq_interrupt_vector_set(&vlynqDevice0, 0 /* intr vector line running into 1130 vlynq */, -+ 0 /* intr mapped onto the interrupt register on remote vlynq and this vlynq */, -+ VLYNQ_REMOTE_DVC, 0 /* polarity active high */, 0 /* interrupt Level triggered */); -+ -+ /* System wide interrupt is 80 for 1130, please note. */ -+ vlynq_init_status[0] = 1; -+ reset_hack = 2; -+ } -+ else -+ { -+ if(reset_hack == 1) -+ printk("VLYNQ INIT FAILED: Please try cold reboot. \n"); -+ else -+ printk("Failed to initialize the VLYNQ interface at insmod.\n"); -+ -+ } -+} -+ -+void vlynq_dev_init(void) -+{ -+ volatile unsigned int *reset_base = (unsigned int *) AVALANCHE_RESET_CONTROL_BASE; -+ -+ *reset_base &= ~((1 << AVALANCHE_LOW_VLYNQ_RESET_BIT)); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT)); */ -+ -+ vlynq_delay(20000); -+ -+ /* Bring vlynq out of reset if not already done */ -+ *reset_base |= (1 << AVALANCHE_LOW_VLYNQ_RESET_BIT); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT); */ -+ vlynq_delay(20000); /* Allowing sufficient time to VLYNQ to settle down.*/ -+ -+ vlynq_ar7wrd_dev_init( ); -+ -+} -+ -+/* This function is board specific and should be ported for each board. */ -+void remote_vlynq_dev_reset_ctrl(unsigned int module_reset_bit, -+ AVALANCHE_RESET_CTRL_T reset_ctrl) -+{ -+ if(module_reset_bit >= 32) -+ return; -+ -+ switch(module_reset_bit) -+ { -+ case 0: -+ if(OUT_OF_RESET == reset_ctrl) -+ { -+ if(reset_hack) return; -+ -+ vlynq_delay(20000); -+ printk("Un-resetting the remote device.\n"); -+ vlynq_dev_init(); -+ printk("Re-initialized the VLYNQ.\n"); -+ reset_hack = 2; -+ } -+ else if(IN_RESET == reset_ctrl) -+ { -+ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT &= ~(1<<18); -+ -+ vlynq_delay(20000); -+ printk("Resetting the remote device.\n"); -+ reset_hack = 0; -+ } -+ else -+ ; -+ break; -+ -+ default: -+ break; -+ -+ } -+} -+ -diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c ---- linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c 2005-11-10 01:10:45.891577500 +0100 -@@ -0,0 +1,243 @@ -+/****************************************************************************** -+ * FILE PURPOSE: Vlynq Linux Device Driver Source -+ ****************************************************************************** -+ * FILE NAME: vlynq_drv.c -+ * -+ * DESCRIPTION: Vlynq Linux Device Driver Source -+ * -+ * REVISION HISTORY: -+ * -+ * Date Description Author -+ *----------------------------------------------------------------------------- -+ * 17 July 2003 Initial Creation Anant Gole -+ * 17 Dec 2003 Updates Sharath Kumar -+ * -+ * (C) Copyright 2003, Texas Instruments, Inc -+ *******************************************************************************/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+#define TI_VLYNQ_VERSION "0.2" -+ -+/* debug on ? */ -+#define VLYNQ_DEBUG -+ -+/* Macro for debug and error printf's */ -+#ifdef VLYNQ_DEBUG -+#define DBGPRINT printk -+#else -+#define DBGPRINT(x) -+#endif -+ -+#define ERRPRINT printk -+ -+/* Define the max vlynq ports this driver will support. -+ Device name strings are statically added here */ -+#define MAX_VLYNQ_PORTS 2 -+ -+ -+/* Type define for VLYNQ private structure */ -+typedef struct vlynqPriv{ -+ int irq; -+ VLYNQ_DEV *vlynqDevice; -+}VLYNQ_PRIV; -+ -+extern int vlynq_init_status[2]; -+ -+/* Extern Global variable for vlynq devices used in initialization of the vlynq device -+ * These variables need to be populated/initialized by the system as part of initialization -+ * process. The vlynq enumerator can run at initialization and populate these globals -+ */ -+ -+VLYNQ_DEV vlynqDevice0; -+VLYNQ_DEV vlynqDevice1; -+ -+/* Defining dummy macro AVALANCHE_HIGH_VLYNQ_INT to take -+ * care of compilation in case of single vlynq device -+ */ -+ -+#ifndef AVALANCHE_HIGH_VLYNQ_INT -+#define AVALANCHE_HIGH_VLYNQ_INT 0 -+#endif -+ -+ -+ -+/* vlynq private object */ -+VLYNQ_PRIV vlynq_priv[CONFIG_AR7_VLYNQ_PORTS] = { -+ { LNXINTNUM(AVALANCHE_LOW_VLYNQ_INT),&vlynqDevice0}, -+ { LNXINTNUM(AVALANCHE_HIGH_VLYNQ_INT),&vlynqDevice1}, -+}; -+ -+extern void vlynq_dev_init(void); -+ -+ -+/* =================================== all the operations */ -+ -+static int -+vlynq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ return 0; -+} -+ -+static struct file_operations vlynq_fops = { -+ owner: THIS_MODULE, -+ ioctl: vlynq_ioctl, -+}; -+ -+/* Vlynq device object */ -+static struct miscdevice vlynq_dev [MAX_VLYNQ_PORTS] = { -+ { MISC_DYNAMIC_MINOR , "vlynq0", &vlynq_fops }, -+ { MISC_DYNAMIC_MINOR , "vlynq1", &vlynq_fops }, -+}; -+ -+ -+/* Proc read function */ -+static int -+vlynq_read_link_proc(char *buf, char **start, off_t offset, int count, int *eof, void *unused) -+{ -+ int instance; -+ int len = 0; -+ -+ len += sprintf(buf +len,"VLYNQ Devices : %d\n",CONFIG_AR7_VLYNQ_PORTS); -+ -+ for(instance =0;instance < CONFIG_AR7_VLYNQ_PORTS;instance++) -+ { -+ int link_state; -+ char *link_msg[] = {" DOWN "," UP "}; -+ -+ if(vlynq_init_status[instance] == 0) -+ link_state = 0; -+ -+ else if (vlynq_link_check(vlynq_priv[instance].vlynqDevice)) -+ link_state = 1; -+ -+ else -+ link_state = 0; -+ -+ len += sprintf(buf + len, "VLYNQ %d: Link state: %s\n",instance,link_msg[link_state]); -+ -+ } -+ /* Print info about vlynq device 1 */ -+ -+ return len; -+} -+ -+ -+/* Proc function to display driver version */ -+static int -+vlynq_read_ver_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data) -+{ -+ int instance; -+ int len=0; -+ -+ len += sprintf(buf +len,"\nTI Linux VLYNQ Driver Version %s\n",TI_VLYNQ_VERSION); -+ return len; -+} -+ -+ -+ -+ -+/* Wrapper for vlynq ISR */ -+static void lnx_vlynq_root_isr(int irq, void * arg, struct pt_regs *regs) -+{ -+ vlynq_root_isr(arg); -+} -+ -+/* =================================== init and cleanup */ -+ -+int vlynq_init_module(void) -+{ -+ int ret; -+ int unit = 0; -+ int instance_count = CONFIG_AR7_VLYNQ_PORTS; -+ volatile int *ptr; -+ -+ vlynq_dev_init(); -+ -+ DBGPRINT("Vlynq CONFIG_AR7_VLYNQ_PORTS=%d\n", CONFIG_AR7_VLYNQ_PORTS); -+ /* If num of configured vlynq ports > supported by driver return error */ -+ if (instance_count > MAX_VLYNQ_PORTS) -+ { -+ ERRPRINT("ERROR: vlynq_init_module(): Max %d supported\n", MAX_VLYNQ_PORTS); -+ return (-1); -+ } -+ -+ /* register the misc device */ -+ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++) -+ { -+ ret = misc_register(&vlynq_dev[unit]); -+ -+ if(ret < 0) -+ { -+ ERRPRINT("ERROR:Could not register vlynq device:%d\n",unit); -+ continue; -+ } -+ else -+ DBGPRINT("Vlynq Device %s registered with minor no %d as misc device. Result=%d\n", -+ vlynq_dev[unit].name, vlynq_dev[unit].minor, ret); -+#if 0 -+ -+ DBGPRINT("Calling vlynq init\n"); -+ -+ /* Read the global variable for VLYNQ device structure and initialize vlynq driver */ -+ ret = vlynq_init(vlynq_priv[unit].vlynqDevice,VLYNQ_INIT_PERFORM_ALL ); -+#endif -+ -+ if(vlynq_init_status[unit] == 0) -+ { -+ printk("VLYNQ %d : init failed\n",unit); -+ continue; -+ } -+ -+ /* Check link before proceeding */ -+ if (!vlynq_link_check(vlynq_priv[unit].vlynqDevice)) -+ { -+ DBGPRINT("\nError: Vlynq link not available.trying once before Exiting"); -+ } -+ else -+ { -+ DBGPRINT("Vlynq instance:%d Link UP\n",unit); -+ -+ /* Install the vlynq local root ISR */ -+ request_irq(vlynq_priv[unit].irq,lnx_vlynq_root_isr,0,vlynq_dev[unit].name,vlynq_priv[unit].vlynqDevice); -+ } -+ } -+ -+ proc_mkdir("avalanche", NULL); -+ /* Creating proc entry for the devices */ -+ create_proc_read_entry("avalanche/vlynq_link", 0, NULL, vlynq_read_link_proc, NULL); -+ create_proc_read_entry("avalanche/vlynq_ver", 0, NULL, vlynq_read_ver_proc, NULL); -+ -+ return 0; -+} -+ -+void vlynq_cleanup_module(void) -+{ -+ int unit = 0; -+ -+ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++) -+ { -+ DBGPRINT("vlynq_cleanup_module(): Unregistring misc device %s\n",vlynq_dev[unit].name); -+ misc_deregister(&vlynq_dev[unit]); -+ } -+ -+ remove_proc_entry("avalanche/vlynq_link", NULL); -+ remove_proc_entry("avalanche/vlynq_ver", NULL); -+} -+ -+ -+module_init(vlynq_init_module); -+module_exit(vlynq_cleanup_module); -+ -diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c ---- linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c 2005-11-10 01:10:45.975582750 +0100 -@@ -0,0 +1,1214 @@ -+/*************************************************************************** -+**+----------------------------------------------------------------------+** -+**| **** |** -+**| **** |** -+**| ******o*** |** -+**| ********_///_**** |** -+**| ***** /_//_/ **** |** -+**| ** ** (__/ **** |** -+**| ********* |** -+**| **** |** -+**| *** |** -+**| |** -+**| Copyright (c) 2003 Texas Instruments Incorporated |** -+**| ALL RIGHTS RESERVED |** -+**| |** -+**| Permission is hereby granted to licensees of Texas Instruments |** -+**| Incorporated (TI) products to use this computer program for the sole |** -+**| purpose of implementing a licensee product based on TI products. |** -+**| No other rights to reproduce, use, or disseminate this computer |** -+**| program, whether in part or in whole, are granted. |** -+**| |** -+**| TI makes no representation or warranties with respect to the |** -+**| performance of this computer program, and specifically disclaims |** -+**| any responsibility for any damages, special or consequential, |** -+**| connected with the use of this program. |** -+**| |** -+**+----------------------------------------------------------------------+** -+***************************************************************************/ -+ -+/*************************************************************************** -+ * ------------------------------------------------------------------------------ -+ * Module : vlynq_hal.c -+ * Description : This file implements VLYNQ HAL API. -+ * ------------------------------------------------------------------------------ -+ ***************************************************************************/ -+ -+#include -+#include -+#include -+ -+/**** Local Function prototypes *******/ -+static int vlynqInterruptInit(VLYNQ_DEV *pdev); -+static void vlynq_configClock(VLYNQ_DEV *pdev); -+ -+/*** Second argument must be explicitly type casted to -+ * (VLYNQ_DEV*) inside the following functions */ -+static void vlynq_local_module_isr(void *arg1, void *arg2, void *arg3); -+static void vlynq_remote_module_isr(void *arg1, void *arg2, void *arg3); -+ -+ -+volatile int vlynq_delay_value = 0; -+ -+/* Code adopted from original vlynq driver */ -+void vlynq_delay(unsigned int clktime) -+{ -+ int i = 0; -+ volatile int *ptr = &vlynq_delay_value; -+ *ptr = 0; -+ -+ /* We are assuming that the each cycle takes about -+ * 23 assembly instructions. */ -+ for(i = 0; i < (clktime + 23)/23; i++) -+ { -+ *ptr = *ptr + 1; -+ } -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_configClock() -+ * Description: Configures clock settings based on input parameters -+ * Adapted from original vlyna driver from Cable -+ */ -+static void vlynq_configClock(VLYNQ_DEV * pdev) -+{ -+ unsigned int tmp; -+ -+ switch( pdev->clk_source) -+ { -+ case VLYNQ_CLK_SOURCE_LOCAL: /* we output the clock, clk_div in range [1..8]. */ -+ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ; -+ VLYNQ_CTRL_REG = tmp; -+ VLYNQ_R_CTRL_REG = 0ul; -+ break; -+ case VLYNQ_CLK_SOURCE_REMOTE: /* we need to set the clock pin as input */ -+ VLYNQ_CTRL_REG = 0ul; -+ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ; -+ VLYNQ_R_CTRL_REG = tmp; -+ break; -+ default: /* do nothing about the clock, but clear other bits. */ -+ tmp = ~(VLYNQ_CTL_CLKDIR_MASK | VLYNQ_CTL_CLKDIV_MASK); -+ VLYNQ_CTRL_REG &= tmp; -+ break; -+ } -+} -+ -+ /* ---------------------------------------------------------------------------- -+ * Function : vlynq_link_check() -+ * Description: This function checks the current VLYNQ for a link. -+ * An arbitrary amount of time is allowed for the link to come up . -+ * Returns 0 for "no link / failure " and 1 for "link available". -+ * ----------------------------------------------------------------------------- -+ */ -+unsigned int vlynq_link_check( VLYNQ_DEV * pdev) -+{ -+ /*sleep for 64 cycles, allow link to come up*/ -+ vlynq_delay(64); -+ -+ /* check status register return OK if link is found. */ -+ if (VLYNQ_STATUS_REG & VLYNQ_STS_LINK_MASK) -+ { -+ return 1; /* Link Available */ -+ } -+ else -+ { -+ return 0; /* Link Failure */ -+ } -+} -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_init() -+ * Description: Initialization function accepting paramaters for VLYNQ module -+ * initialization. The Options bitmap decides what operations are performed -+ * as a part of initialization. The Input parameters are obtained through the -+ * sub fields of VLYNQ_DEV structure. -+ */ -+ -+int vlynq_init(VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options) -+{ -+ unsigned int map; -+ unsigned int val=0,cnt,tmp; -+ unsigned int counter=0; -+ VLYNQ_INTERRUPT_CNTRL *intSetting=NULL; -+ -+ /* validate arguments */ -+ if( VLYNQ_OUTRANGE(pdev->clk_source, VLYNQ_CLK_SOURCE_REMOTE, VLYNQ_CLK_SOURCE_NONE) || -+ VLYNQ_OUTRANGE(pdev->clk_div, 8, 1) ) -+ { -+ return VLYNQ_INVALID_ARG; -+ } -+ -+ /** perform all sanity checks first **/ -+ if(pdev->state != VLYNQ_DRV_STATE_UNINIT) -+ return VLYNQ_INVALID_DRV_STATE; -+ -+ /** Initialize local and remote register set addresses- additional -+ * provision to access the registers directly if need be */ -+ pdev->local = (VLYNQ_REG_SET*)pdev->module_base; -+ pdev->remote = (VLYNQ_REG_SET*) (pdev->module_base + VLYNQ_REMOTE_REGS_OFFSET); -+ -+ /* Detect faulty int configuration that might induce int pkt looping */ -+ if ( (options & VLYNQ_INIT_LOCAL_INTERRUPTS) && (options & VLYNQ_INIT_REMOTE_INTERRUPTS) ) -+ { -+ /* case when both local and remote are configured */ -+ if((pdev->local_irq.intLocal== VLYNQ_INT_REMOTE ) /* interrupts transfered to remote from local */ -+ && (pdev->remote_irq.intLocal== VLYNQ_INT_REMOTE) /* interrupts transfered from remote to local */ -+ && ((pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) || (pdev->remote_irq.intRemote == VLYNQ_INT_ROOT_ISR)) ) -+ { -+ return (VLYNQ_INT_CONFIG_ERR); -+ } -+ } -+ -+ pdev->state = VLYNQ_DRV_STATE_ININIT; -+ pdev->intCount = 0; -+ pdev->isrCount = 0; -+ -+ /*** Its assumed that the vlynq module has been brought out of reset -+ * before invocation of vlynq_init. Since, this operation is board specific -+ * it must be handled outside this generic driver */ -+ -+ /* Assert reset the remote device, call reset_cb, -+ * reset CB holds Reset according to the device needs. */ -+ VLYNQ_RESETCB(VLYNQ_RESET_ASSERT); -+ -+ /* Handle VLYNQ clock, HW default (Sense On Reset) is -+ * usually input for all the devices. */ -+ if (options & VLYNQ_INIT_CONFIG_CLOCK) -+ { -+ vlynq_configClock(pdev); -+ } -+ -+ /* Call reset_cb again. It will release the remote device -+ * from reset, and wait for a while. */ -+ VLYNQ_RESETCB(VLYNQ_RESET_DEASSERT); -+ -+ if(options & VLYNQ_INIT_CHECK_LINK ) -+ { -+ /* Check for link up during initialization*/ -+ while( counter < 25 ) -+ { -+ /* loop around giving a chance for link status to settle down */ -+ counter++; -+ if(vlynq_link_check(pdev)) -+ { -+ /* Link is up exit loop*/ -+ break; -+ } -+ -+ vlynq_delay(4000); -+ }/*end of while counter loop */ -+ -+ if(!vlynq_link_check(pdev)) -+ { -+ /* Handle this case as abort */ -+ pdev->state = VLYNQ_DRV_STATE_ERROR; -+ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL); -+ return VLYNQ_LINK_DOWN; -+ }/* end of if not vlynq_link_check conditional block */ -+ -+ }/*end of if options & VLYNQ_INIT_CHECK_LINK conditional block */ -+ -+ -+ if (options & VLYNQ_INIT_LOCAL_MEM_REGIONS) -+ { -+ /* Initialise local memory regions . This initialization lets -+ * the local host access remote device memory regions*/ -+ int i; -+ -+ /* configure the VLYNQ portal window to a PHYSICAL -+ * address of the local CPU */ -+ VLYNQ_ALIGN4(pdev->local_mem.Txmap); -+ VLYNQ_TXMAP_REG = (pdev->local_mem.Txmap); -+ -+ /*This code assumes input parameter is itself a physical address */ -+ for(i=0; i < VLYNQ_MAX_MEMORY_REGIONS ; i++) -+ { -+ /* Physical address on the remote */ -+ map = i+1; -+ VLYNQ_R_RXMAP_SIZE_REG(map) = 0; -+ if( pdev->remote_mem.RxSize[i]) -+ { -+ VLYNQ_ALIGN4(pdev->remote_mem.RxOffset[i]); -+ VLYNQ_ALIGN4(pdev->remote_mem.RxSize[i]); -+ VLYNQ_R_RXMAP_OFFSET_REG(map) = pdev->remote_mem.RxOffset[i]; -+ VLYNQ_R_RXMAP_SIZE_REG(map) = pdev->remote_mem.RxSize[i]; -+ } -+ } -+ } -+ -+ if(options & VLYNQ_INIT_REMOTE_MEM_REGIONS ) -+ { -+ int i; -+ -+ /* Initialise remote memory regions. This initialization lets remote -+ * device access local host memory regions. It configures the VLYNQ portal -+ * window to a PHYSICAL address of the remote */ -+ VLYNQ_ALIGN4(pdev->remote_mem.Txmap); -+ VLYNQ_R_TXMAP_REG = pdev->remote_mem.Txmap; -+ -+ for( i=0; ilocal_mem.RxSize[i]) -+ { -+ VLYNQ_ALIGN4(pdev->local_mem.RxOffset[i]); -+ VLYNQ_ALIGN4(pdev->local_mem.RxSize[i]); -+ VLYNQ_RXMAP_OFFSET_REG(map) = (pdev->local_mem.RxOffset[i]); -+ VLYNQ_RXMAP_SIZE_REG(map) = (pdev->local_mem.RxSize[i]); -+ } -+ } -+ } -+ -+ /* Adapted from original vlynq driver from cable - Calculate VLYNQ bus width */ -+ pdev->width = 3 + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_STATUS_REG) -+ + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_R_STATUS_REG); -+ -+ /* chance to initialize the device, e.g. to boost VLYNQ -+ * clock by modifying pdev->clk_div or and verify the width. */ -+ VLYNQ_RESETCB(VLYNQ_RESET_LINKESTABLISH); -+ -+ /* Handle VLYNQ clock, HW default (Sense On Reset) is -+ * usually input for all the devices. */ -+ if(options & VLYNQ_INIT_CONFIG_CLOCK ) -+ { -+ vlynq_configClock(pdev); -+ } -+ -+ /* last check for link*/ -+ if(options & VLYNQ_INIT_CHECK_LINK ) -+ { -+ /* Final Check for link during initialization*/ -+ while( counter < 25 ) -+ { -+ /* loop around giving a chance for link status to settle down */ -+ counter++; -+ if(vlynq_link_check(pdev)) -+ { -+ /* Link is up exit loop*/ -+ break; -+ } -+ -+ vlynq_delay(4000); -+ }/*end of while counter loop */ -+ -+ if(!vlynq_link_check(pdev)) -+ { -+ /* Handle this case as abort */ -+ pdev->state = VLYNQ_DRV_STATE_ERROR; -+ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL); -+ return VLYNQ_LINK_DOWN; -+ }/* end of if not vlynq_link_check conditional block */ -+ -+ } /* end of if options & VLYNQ_INIT_CHECK_LINK */ -+ -+ if(options & VLYNQ_INIT_LOCAL_INTERRUPTS ) -+ { -+ /* Configure local interrupt settings */ -+ intSetting = &(pdev->local_irq); -+ -+ /* Map local module status interrupts to interrupt vector*/ -+ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ; -+ -+ /* enable local module status interrupts */ -+ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT; -+ -+ if ( intSetting->intLocal == VLYNQ_INT_LOCAL ) -+ { -+ /*set the intLocal bit*/ -+ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT; -+ } -+ -+ /* Irrespective of whether interrupts are handled locally, program -+ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1 -+ * i.e remote packets are set intPending register->which will result in -+ * same packet being sent out) has been done already -+ */ -+ -+ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) -+ { -+ /* Set the int2Cfg register, so that remote interrupt -+ * packets are written to intPending register */ -+ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT; -+ -+ /* Set intPtr register to point to intPending register */ -+ VLYNQ_INT_PTR_REG = VLYNQ_INT_PENDING_REG_PTR ; -+ } -+ else -+ { -+ /*set the interrupt pointer register*/ -+ VLYNQ_INT_PTR_REG = intSetting->intr_ptr; -+ /* Dont bother to modify int2Cfg as it would be zero */ -+ } -+ -+ /** Clear bits related to INT settings in control register **/ -+ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK); -+ -+ /** Or the bits to be set with Control register **/ -+ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG | val; -+ -+ /* initialise local ICB */ -+ if(vlynqInterruptInit(pdev)==VLYNQ_MEMALLOC_FAIL) -+ return VLYNQ_MEMALLOC_FAIL; -+ -+ /* Install handler for local module status interrupts. By default when -+ * local interrupt setting is initialised, the local module status are -+ * enabled and handler hooked up */ -+ if(vlynq_install_isr(pdev, intSetting->map_vector, vlynq_local_module_isr, -+ pdev, NULL, NULL) == VLYNQ_INVALID_ARG) -+ return VLYNQ_INVALID_ARG; -+ } /* end of init local interrupts */ -+ -+ if(options & VLYNQ_INIT_REMOTE_INTERRUPTS ) -+ { -+ /* Configure remote interrupt settings from configuration */ -+ intSetting = &(pdev->remote_irq); -+ -+ /* Map remote module status interrupts to remote interrupt vector*/ -+ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ; -+ /* enable remote module status interrupts */ -+ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT; -+ -+ if ( intSetting->intLocal == VLYNQ_INT_LOCAL ) -+ { -+ /*set the intLocal bit*/ -+ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT; -+ } -+ -+ /* Irrespective of whether interrupts are handled locally, program -+ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1 -+ * i.e remote packets are set intPending register->which will result in -+ * same packet being sent out) has been done already -+ */ -+ -+ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) -+ { -+ /* Set the int2Cfg register, so that remote interrupt -+ * packets are written to intPending register */ -+ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT; -+ /* Set intPtr register to point to intPending register */ -+ VLYNQ_R_INT_PTR_REG = VLYNQ_R_INT_PENDING_REG_PTR ; -+ } -+ else -+ { -+ /*set the interrupt pointer register*/ -+ VLYNQ_R_INT_PTR_REG = intSetting->intr_ptr; -+ /* Dont bother to modify int2Cfg as it would be zero */ -+ } -+ -+ if( (intSetting->intLocal == VLYNQ_INT_REMOTE) && -+ (options & VLYNQ_INIT_LOCAL_INTERRUPTS) && -+ (pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) ) -+ { -+ /* Install handler for remote module status interrupts. By default when -+ * remote interrupts are forwarded to local root_isr then remote_module_isr is -+ * enabled and handler hooked up */ -+ if(vlynq_install_isr(pdev,intSetting->map_vector,vlynq_remote_module_isr, -+ pdev, NULL, NULL) == VLYNQ_INVALID_ARG) -+ return VLYNQ_INVALID_ARG; -+ } -+ -+ -+ /** Clear bits related to INT settings in control register **/ -+ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK); -+ -+ /** Or the bits to be set with the remote Control register **/ -+ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG | val; -+ -+ } /* init remote interrupt settings*/ -+ -+ if(options & VLYNQ_INIT_CLEAR_ERRORS ) -+ { -+ /* Clear errors during initialization */ -+ tmp = VLYNQ_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK); -+ VLYNQ_STATUS_REG = tmp; -+ tmp = VLYNQ_R_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK); -+ VLYNQ_R_STATUS_REG = tmp; -+ } -+ -+ /* clear int status */ -+ val = VLYNQ_INT_STAT_REG; -+ VLYNQ_INT_STAT_REG = val; -+ -+ /* finish initialization */ -+ pdev->state = VLYNQ_DRV_STATE_RUN; -+ VLYNQ_RESETCB( VLYNQ_RESET_INITOK); -+ return VLYNQ_SUCCESS; -+ -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynqInterruptInit() -+ * Description: This local function is used to set up the ICB table for the -+ * VLYNQ_STATUS_REG vlynq module. The input parameter "pdev" points the vlynq -+ * device instance whose ICB is allocated. -+ * Return : returns VLYNQ_SUCCESS or vlynq error for failure -+ * ----------------------------------------------------------------------------- -+ */ -+static int vlynqInterruptInit(VLYNQ_DEV *pdev) -+{ -+ int i, numslots; -+ -+ /* Memory allocated statically. -+ * Initialise ICB,free list.Indicate primary slot empty. -+ * Intialise intVector <==> map_vector translation table*/ -+ for(i=0; i < VLYNQ_NUM_INT_BITS; i++) -+ { -+ pdev->pIntrCB[i].isr = NULL; -+ pdev->pIntrCB[i].next = NULL; /*nothing chained */ -+ pdev->vector_map[i] = -1; /* indicates unmapped */ -+ } -+ -+ /* In the ICB slots, [VLYNQ_NUM_INT_BITS i.e 32 to ICB array size) are expansion slots -+ * required only when interrupt chaining/sharing is supported. In case -+ * of chained interrupts the list starts from primary slot and the -+ * additional slots are obtained from the common free area */ -+ -+ /* Initialise freelist */ -+ -+ numslots = VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS; -+ -+ if (numslots > VLYNQ_NUM_INT_BITS) -+ { -+ pdev->freelist = &(pdev->pIntrCB[VLYNQ_NUM_INT_BITS]); -+ -+ for(i = VLYNQ_NUM_INT_BITS; i < (numslots-1) ; i++) -+ { -+ pdev->pIntrCB[i].next = &(pdev->pIntrCB[i+1]); -+ pdev->pIntrCB[i].isr = NULL; -+ } -+ pdev->pIntrCB[i].next=NULL; /* Indicate end of freelist*/ -+ pdev->pIntrCB[i].isr=NULL; -+ } -+ else -+ { -+ pdev->freelist = NULL; -+ } -+ -+ /** Reset mapping for IV 0-7 **/ -+ VLYNQ_IVR_03TO00_REG = 0; -+ VLYNQ_IVR_07TO04_REG = 0; -+ -+ return VLYNQ_SUCCESS; -+} -+ -+/** remember that hooking up of root ISR handler with the interrupt controller -+ * is not done as a part of this driver. Typically, it must be done after -+ * invoking vlynq_init*/ -+ -+ -+ /* ---------------------------------------------------------------------------- -+ * ISR with the SOC interrupt controller. This ISR typically scans -+ * the Int PENDING/SET register in the VLYNQ module and calls the -+ * appropriate ISR associated with the correponding vector number. -+ * ----------------------------------------------------------------------------- -+ */ -+void vlynq_root_isr(void *arg) -+{ -+ int source; /* Bit position of pending interrupt, start from 0 */ -+ unsigned int interrupts, clrInterrupts; -+ VLYNQ_DEV * pdev; -+ VLYNQ_INTR_CNTRL_ICB *entry; -+ -+ pdev=(VLYNQ_DEV*)(arg); /*obtain the vlynq device pointer*/ -+ -+ interrupts = VLYNQ_INT_STAT_REG; /* Get the list of pending interrupts */ -+ VLYNQ_INT_STAT_REG = interrupts; /* clear the int CR register */ -+ clrInterrupts = interrupts; /* save them for further analysis */ -+ -+ debugPrint("vlynq_root_isr: dev %u. INTCR = 0x%08lx\n", pdev->dev_idx, clrInterrupts,0,0,0,0); -+ -+ /* Scan interrupt bits */ -+ source =0; -+ while( clrInterrupts != 0) -+ { -+ /* test if bit is set? */ -+ if( 0x1ul & clrInterrupts) -+ { -+ entry = &(pdev->pIntrCB[source]); /* Get the ISR entry */ -+ pdev->intCount++; /* update interrupt count */ -+ if(entry->isr != NULL) -+ { -+ do -+ { -+ pdev->isrCount++; /* update isr invocation count */ -+ /* Call the user ISR and update the count for ISR */ -+ entry->isrCount++; -+ entry->isr(entry->arg1, entry->arg2, entry->arg3); -+ if (entry->next == NULL) break; -+ entry = entry->next; -+ -+ } while (entry->isr != NULL); -+ } -+ else -+ { -+ debugPrint(" ISR not installed for vlynq vector:%d\n",source,0,0,0,0,0); -+ } -+ } -+ clrInterrupts >>= 1; /* Next source bit */ -+ ++source; -+ } /* endWhile clrInterrupts != 0 */ -+} -+ -+ -+ /* ---------------------------------------------------------------------------- -+ * Function : vlynq_local__module_isr() -+ * Description: This ISR is attached to the local VLYNQ interrupt vector -+ * by the Vlynq Driver when local interrupts are being handled. i.e. -+ * intLocal=1. This ISR handles local Vlynq module status interrupts only -+ * AS a part of this ISR, user callback in VLYNQ_DEV structure -+ * is invoked. -+ * VLYNQ_DEV is passed as arg1. arg2 and arg3 are unused. -+ * ----------------------------------------------------------------------------- -+ */ -+static void vlynq_local_module_isr(void *arg1,void *arg2, void *arg3) -+{ -+ VLYNQ_REPORT_CB func; -+ unsigned int dwStatRegVal; -+ VLYNQ_DEV * pdev; -+ -+ pdev = (VLYNQ_DEV*) arg1; -+ /* Callback function is read from the device pointer that is passed as an argument */ -+ func = pdev->report_cb; -+ -+ /* read local status register */ -+ dwStatRegVal = VLYNQ_STATUS_REG; -+ -+ /* clear pending events */ -+ VLYNQ_STATUS_REG = dwStatRegVal; -+ -+ /* invoke user callback */ -+ if( func != NULL) -+ func( pdev, VLYNQ_LOCAL_DVC, dwStatRegVal); -+ -+} -+ -+ /* ---------------------------------------------------------------------------- -+ * Function : vlynq_remote_module_isr() -+ * Description: This ISR is attached to the remote VLYNQ interrupt vector -+ * by the Vlynq Driver when remote interrupts are being handled locally. i.e. -+ * intLocal=1. This ISR handles local Vlynq module status interrupts only -+ * AS a part of this ISR, user callback in VLYNQ_DEV structure -+ * is invoked. -+ * The parameters irq,regs ar unused. -+ * ----------------------------------------------------------------------------- -+ */ -+static void vlynq_remote_module_isr(void *arg1,void *arg2, void *arg3) -+{ -+ VLYNQ_REPORT_CB func; -+ unsigned int dwStatRegVal; -+ VLYNQ_DEV * pdev; -+ -+ -+ pdev = (VLYNQ_DEV*) arg1; -+ -+ /* Callback function is read from the device pointer that is passed as an argument */ -+ func = pdev->report_cb; -+ -+ /* read local status register */ -+ dwStatRegVal = VLYNQ_R_STATUS_REG; -+ -+ /* clear pending events */ -+ VLYNQ_R_STATUS_REG = dwStatRegVal; -+ -+ /* invoke user callback */ -+ if( func != NULL) -+ func( pdev, VLYNQ_REMOTE_DVC, dwStatRegVal); -+ -+} -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_interrupt_get_count() -+ * Description: This function returns the number of times a particular intr -+ * has been invoked. -+ * -+ * It returns 0, if erroneous map_vector is specified or if the corres isr -+ * has not been registered with VLYNQ. -+ */ -+unsigned int vlynq_interrupt_get_count(VLYNQ_DEV *pdev, -+ unsigned int map_vector) -+{ -+ VLYNQ_INTR_CNTRL_ICB *entry; -+ unsigned int count = 0; -+ -+ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) -+ return count; -+ -+ entry = &(pdev->pIntrCB[map_vector]); -+ -+ if (entry) -+ count = entry->isrCount; -+ -+ return (count); -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_install_isr() -+ * Description: This function installs ISR for Vlynq interrupt vector -+ * bits(in IntPending register). This function should be used only when -+ * Vlynq interrupts are being handled locally(remote may be programmed to send -+ * interrupt packets).Also, the int2cfg should be 1 and the least significant -+ * 8 bits of the Interrupt Pointer Register must point to Interrupt -+ * Pending/Set Register). -+ * If host int2cfg=0 and the Interrupt Pointer register contains -+ * the address of the interrupt set register in the interrupt controller -+ * module of the local device , then the ISR for the remote interrupt must be -+ * directly registered with the Interrupt controller and must not use this API -+ * Note: this function simply installs the ISR in ICB It doesnt modify -+ * any register settings -+ */ -+int -+vlynq_install_isr(VLYNQ_DEV *pdev, -+ unsigned int map_vector, -+ VLYNQ_INTR_CNTRL_ISR isr, -+ void *arg1, void *arg2, void *arg3) -+{ -+ VLYNQ_INTR_CNTRL_ICB *entry; -+ -+ if ( (map_vector > (VLYNQ_NUM_INT_BITS-1)) || (isr == NULL) ) -+ return VLYNQ_INVALID_ARG; -+ -+ entry = &(pdev->pIntrCB[map_vector]); -+ -+ if(entry->isr == NULL) -+ { -+ entry->isr = isr; -+ entry->arg1 = arg1; -+ entry->arg2 = arg2; -+ entry->arg3 = arg3; -+ entry->next = NULL; -+ } -+ else -+ { -+ /** No more empty slots,return error */ -+ if(pdev->freelist == NULL) -+ return VLYNQ_MEMALLOC_FAIL; -+ -+ while(entry->next != NULL) -+ { -+ entry = entry->next; -+ } -+ -+ /* Append new node to the chain */ -+ entry->next = pdev->freelist; -+ /* Remove the appended node from freelist */ -+ pdev->freelist = pdev->freelist->next; -+ entry= entry->next; -+ -+ /*** Set the ICB fields ***/ -+ entry->isr = isr; -+ entry->arg1 = arg1; -+ entry->arg2 = arg2; -+ entry->arg3 = arg3; -+ entry->next = NULL; -+ } -+ -+ return VLYNQ_SUCCESS; -+} -+ -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_uninstall_isr -+ * Description: This function is used to uninstall a previously -+ * registered ISR. In case of shared/chained interrupts, the -+ * void * arg parameter must uniquely identify the ISR to be -+ * uninstalled. -+ * Note: this function simply uninstalls the ISR in ICB -+ * It doesnt modify any register settings -+ */ -+int -+vlynq_uninstall_isr(VLYNQ_DEV *pdev, -+ unsigned int map_vector, -+ void *arg1, void *arg2, void *arg3) -+{ -+ VLYNQ_INTR_CNTRL_ICB *entry,*temp; -+ -+ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) -+ return VLYNQ_INVALID_ARG; -+ -+ entry = &(pdev->pIntrCB[map_vector]); -+ -+ if(entry->isr == NULL ) -+ return VLYNQ_ISR_NON_EXISTENT; -+ -+ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) ) -+ { -+ if(entry->next == NULL) -+ { -+ entry->isr=NULL; -+ return VLYNQ_SUCCESS; -+ } -+ else -+ { -+ temp = entry->next; -+ /* Copy next node in the chain to prim.slot */ -+ entry->isr = temp->isr; -+ entry->arg1 = temp->arg1; -+ entry->arg2 = temp->arg2; -+ entry->arg3 = temp->arg3; -+ entry->next = temp->next; -+ /* Free the just copied node */ -+ temp->isr = NULL; -+ temp->arg1 = NULL; -+ temp->arg2 = NULL; -+ temp->arg3 = NULL; -+ temp->next = pdev->freelist; -+ pdev->freelist = temp; -+ return VLYNQ_SUCCESS; -+ } -+ } -+ else -+ { -+ temp = entry; -+ while ( (entry = temp->next) != NULL) -+ { -+ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) ) -+ { -+ /* remove node from chain */ -+ temp->next = entry->next; -+ /* Add the removed node to freelist */ -+ entry->isr = NULL; -+ entry->arg1 = NULL; -+ entry->arg2 = NULL; -+ entry->arg3 = NULL; -+ entry->next = pdev->freelist; -+ entry->isrCount = 0; -+ pdev->freelist = entry; -+ return VLYNQ_SUCCESS; -+ } -+ temp = entry; -+ } -+ -+ return VLYNQ_ISR_NON_EXISTENT; -+ } -+} -+ -+ -+ -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_vector_set() -+ * description:configures interrupt vector mapping,interrupt type -+ * polarity -all in one go. -+ */ -+int -+vlynq_interrupt_vector_set(VLYNQ_DEV *pdev, /* vlynq device */ -+ unsigned int int_vector, /* int vector on vlynq device */ -+ unsigned int map_vector, /* bit for this interrupt */ -+ VLYNQ_DEV_TYPE dev_type, /* local or remote device */ -+ VLYNQ_INTR_POLARITY pol, /* polarity of interrupt */ -+ VLYNQ_INTR_TYPE type) /* pulsed/level interrupt */ -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ unsigned int bytemask=0XFF; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ /* validate the number of interrupts supported */ -+ if (int_vector >= VLYNQ_IVR_MAXIVR) -+ return VLYNQ_INVALID_ARG; -+ -+ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) -+ return VLYNQ_INVALID_ARG; -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /* Update the intVector<==> bit position translation table */ -+ pdev->vector_map[map_vector] = int_vector; -+ -+ /* val has been initialised to zero. we only have to turn on appropriate bits*/ -+ if(type == VLYNQ_INTR_PULSED) -+ val |= VLYNQ_IVR_INTTYPE_MASK; -+ -+ if(pol == VLYNQ_INTR_ACTIVE_LOW) -+ val |= VLYNQ_IVR_INTPOL_MASK; -+ -+ val |= map_vector; -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ -+ /* Setting a interrupt vector, leaves the interrupt disabled -+ * which must be enabled subsequently */ -+ -+ return VLYNQ_SUCCESS; -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_interrupt_vector_cntl() -+ * Description:enables/disable interrupt -+ */ -+int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev, -+ unsigned int int_vector, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int enable) -+{ -+ volatile unsigned int *vecReg; -+ unsigned int val=0; -+ unsigned int intenMask=0x80; -+ -+ /* validate the number of interrupts supported */ -+ if (int_vector >= VLYNQ_IVR_MAXIVR) -+ return VLYNQ_INVALID_ARG; -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecReg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecReg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** Clear the correct byte position and then or val **/ -+ *vecReg = (*vecReg) & ( ~(intenMask << ( (int_vector %4)*8) ) ); -+ -+ if(enable) -+ { -+ val |= VLYNQ_IVR_INTEN_MASK; -+ /** Write to correct byte position in vecReg*/ -+ *vecReg = (*vecReg) | (val << ( (int_vector % 4)*8) ) ; -+ } -+ -+ return VLYNQ_SUCCESS; -+ -+}/* end of function vlynq_interrupt_vector_cntl */ -+ -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_interrupt_vector_map() -+ * Description:Configures interrupt vector mapping alone -+ */ -+int -+vlynq_interrupt_vector_map( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int int_vector, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ unsigned int bytemask=0x1f; /* mask to turn off bits corresponding to int vector */ -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ /* validate the number of interrupts supported */ -+ if (int_vector >= VLYNQ_IVR_MAXIVR) -+ return VLYNQ_INVALID_ARG; -+ -+ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) -+ return VLYNQ_INVALID_ARG; -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /* Update the intVector<==> bit position translation table */ -+ pdev->vector_map[map_vector] = int_vector; -+ -+ /** val has been initialised to zero. we only have to turn on -+ * appropriate bits*/ -+ val |= map_vector; -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ -+ return VLYNQ_SUCCESS; -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_set_polarity() -+ * description:configures interrupt polarity . -+ */ -+int -+vlynq_interrupt_set_polarity( VLYNQ_DEV *pdev , -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector, -+ VLYNQ_INTR_POLARITY pol) -+{ -+ volatile unsigned int * vecreg; -+ int int_vector; -+ unsigned int val=0; -+ unsigned int bytemask=0x20; /** mask to turn off bits corresponding to int polarity */ -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /* val has been initialised to zero. we only have to turn on -+ * appropriate bits, if need be*/ -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ if( pol == VLYNQ_INTR_ACTIVE_LOW) -+ { -+ val |= VLYNQ_IVR_INTPOL_MASK; -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ } -+ -+ return VLYNQ_SUCCESS; -+} -+ -+int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev , -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ int int_vector; -+ unsigned int val=0; -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ -+ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) -+ return(-1); -+ -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** read the information into val **/ -+ val = (*vecreg) & ((VLYNQ_IVR_INTPOL_MASK << ( (int_vector %4)*8) ) ); -+ -+ return (val ? (VLYNQ_INTR_ACTIVE_LOW) : (VLYNQ_INTR_ACTIVE_HIGH)); -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_set_type() -+ * description:configures interrupt type . -+ */ -+int vlynq_interrupt_set_type( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector, -+ VLYNQ_INTR_TYPE type) -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ int int_vector; -+ -+ /** mask to turn off bits corresponding to interrupt type */ -+ unsigned int bytemask=0x40; -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** val has been initialised to zero. we only have to turn on -+ * appropriate bits if need be*/ -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ if( type == VLYNQ_INTR_PULSED) -+ { -+ val |= VLYNQ_IVR_INTTYPE_MASK; -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ } -+ -+ return VLYNQ_SUCCESS; -+} -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_get_type() -+ * description:returns interrupt type . -+ */ -+int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ int int_vector; -+ -+ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) -+ return(-1); -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** Read the correct bit position into val **/ -+ val = (*vecreg) & ((VLYNQ_IVR_INTTYPE_MASK << ( (int_vector %4)*8) ) ); -+ -+ return (val ? (VLYNQ_INTR_PULSED) : (VLYNQ_INTR_LEVEL)); -+} -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_enable() -+ * description:Enable interrupt by writing to IVR register. -+ */ -+int vlynq_interrupt_enable( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ int int_vector; -+ -+ /** mask to turn off bits corresponding to interrupt enable */ -+ unsigned int bytemask=0x80; -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** val has been initialised to zero. we only have to turn on -+ * bit corresponding to interrupt enable*/ -+ val |= VLYNQ_IVR_INTEN_MASK; -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ -+ return VLYNQ_SUCCESS; -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_disable() -+ * description:Disable interrupt by writing to IVR register. -+ */ -+int -+vlynq_interrupt_disable( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ int int_vector; -+ -+ /** mask to turn off bits corresponding to interrupt enable */ -+ unsigned int bytemask=0x80; -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /* We disable the interrupt by simply turning off the bit -+ * corresponding to Interrupt enable. -+ * Clear the interrupt enable bit in the correct byte position **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ /* Dont have to set any bit positions */ -+ -+ return VLYNQ_SUCCESS; -+ -+} -+ -+ -+ -+ -diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c ---- linux.old/drivers/char/serial.c 2005-10-21 16:43:20.709226000 +0200 -+++ linux.dev/drivers/char/serial.c 2005-11-10 01:10:46.015585250 +0100 -@@ -419,7 +419,40 @@ - return 0; - } - --#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD) -+#if defined(CONFIG_AR7) -+ -+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset) -+{ -+ return (inb(info->port + (offset * 4)) & 0xff); -+} -+ -+ -+static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset) -+{ -+#ifdef CONFIG_SERIAL_NOPAUSE_IO -+ return (inb(info->port + (offset * 4)) & 0xff); -+#else -+ return (inb_p(info->port + (offset * 4)) & 0xff); -+#endif -+} -+ -+static _INLINE_ void serial_out(struct async_struct *info, int offset, int value) -+{ -+ outb(value, info->port + (offset * 4)); -+} -+ -+ -+static _INLINE_ void serial_outp(struct async_struct *info, int offset, -+ int value) -+{ -+#ifdef CONFIG_SERIAL_NOPAUSE_IO -+ outb(value, info->port + (offset * 4)); -+#else -+ outb_p(value, info->port + (offset * 4)); -+#endif -+} -+ -+#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD) - - #include - -@@ -478,8 +511,10 @@ - * needed for certain old 386 machines, I've left these #define's - * in.... - */ -+#ifndef CONFIG_AR7 - #define serial_inp(info, offset) serial_in(info, offset) - #define serial_outp(info, offset, value) serial_out(info, offset, value) -+#endif - - - /* -@@ -1728,7 +1763,15 @@ - /* Special case since 134 is really 134.5 */ - quot = (2*baud_base / 269); - else if (baud) -+#ifdef CONFIG_AR7 -+ quot = (CONFIG_AR7_SYS*500000) / baud; -+ -+ if ((quot%16)>7) -+ quot += 8; -+ quot /=16; -+#else - quot = baud_base / baud; -+#endif - } - /* If the quotient is zero refuse the change */ - if (!quot && old_termios) { -@@ -5540,8 +5583,10 @@ - state->irq = irq_cannonicalize(state->irq); - if (state->hub6) - state->io_type = SERIAL_IO_HUB6; -+#ifndef CONFIG_AR7 - if (state->port && check_region(state->port,8)) - continue; -+#endif - #ifdef CONFIG_MCA - if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus) - continue; -@@ -5997,7 +6042,15 @@ - info->io_type = state->io_type; - info->iomem_base = state->iomem_base; - info->iomem_reg_shift = state->iomem_reg_shift; -+#ifdef CONFIG_AR7 -+ quot = (CONFIG_AR7_SYS*500000) / baud; -+ -+ if ((quot%16)>7) -+ quot += 8; -+ quot /=16; -+#else - quot = state->baud_base / baud; -+#endif - cval = cflag & (CSIZE | CSTOPB); - #if defined(__powerpc__) || defined(__alpha__) - cval >>= 8; -diff -urN linux.old/drivers/char/ticfg/Makefile linux.dev/drivers/char/ticfg/Makefile ---- linux.old/drivers/char/ticfg/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/ticfg/Makefile 2005-11-10 01:10:46.051587500 +0100 -@@ -0,0 +1,6 @@ -+ -+O_TARGET := ticfg.o -+ -+obj-$(CONFIG_AR7_ADAM2) := adam2_env.o -+ -+include $(TOPDIR)/Rules.make -diff -urN linux.old/drivers/char/ticfg/adam2_env.c linux.dev/drivers/char/ticfg/adam2_env.c ---- linux.old/drivers/char/ticfg/adam2_env.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/ticfg/adam2_env.c 2005-11-10 01:10:46.051587500 +0100 -@@ -0,0 +1,85 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#undef ADAM2_ENV_DEBUG -+ -+#ifdef ADAM2_ENV_DEBUG -+#define DPRINTK(args...) do { printk(args); } while(0); -+#else -+#define DPRINTK(args...) do { } while(0); -+#endif -+ -+#define ADAM2_ENV_DIR "ticfg" -+#define ADAM2_ENV_NAME "env" -+ -+static struct proc_dir_entry *adam2_env_proc_dir; -+static struct proc_dir_entry *adam2_env_proc_ent; -+ -+static int -+adam2_proc_read_env(char *page, char **start, off_t pos, int count, -+ int *eof, void *data) -+{ -+ int len; -+ t_env_var *env; -+ -+ if (pos > 0) -+ return 0; -+ -+ len=0; -+ for (env = prom_iterenv(0); env; env = prom_iterenv(env)) { -+ if (env->val) { -+ /* XXX check for page len */ -+ len += sprintf(page + len, "%s\t%s\n", -+ env->name, env->val); -+ } -+ } -+ -+ *eof=1; -+ return len; -+} -+ -+static int __init -+adam2_env_init(void) -+{ -+ -+ DPRINTK("%s\n", __FUNCTION__); -+ -+ adam2_env_proc_dir = proc_mkdir(ADAM2_ENV_DIR, NULL); -+ if (!adam2_env_proc_dir) { -+ printk(KERN_ERR "%s: Unable to create /proc/%s entry\n", -+ __FUNCTION__, ADAM2_ENV_DIR); -+ return -ENOMEM; -+ } -+ -+ adam2_env_proc_ent = -+ create_proc_entry(ADAM2_ENV_NAME, 0444, adam2_env_proc_dir); -+ if (!adam2_env_proc_ent) { -+ printk(KERN_ERR "%s: Unable to create /proc/%s/%s entry\n", -+ __FUNCTION__, ADAM2_ENV_DIR, ADAM2_ENV_NAME); -+ remove_proc_entry(ADAM2_ENV_DIR, NULL); -+ return -ENOMEM; -+ } -+ adam2_env_proc_ent->read_proc = adam2_proc_read_env; -+ -+ return 0; -+} -+ -+static -+void __exit -+adam2_env_cleanup(void) -+{ -+ remove_proc_entry(ADAM2_ENV_NAME, adam2_env_proc_dir); -+ remove_proc_entry(ADAM2_ENV_DIR, NULL); -+} -+ -+module_init(adam2_env_init); -+module_exit(adam2_env_cleanup); -+ -+MODULE_LICENSE("GPL"); -diff -urN linux.old/include/asm-mips/addrspace.h linux.dev/include/asm-mips/addrspace.h ---- linux.old/include/asm-mips/addrspace.h 2002-11-29 00:53:15.000000000 +0100 -+++ linux.dev/include/asm-mips/addrspace.h 2005-11-10 01:14:16.400733500 +0100 -@@ -11,6 +11,8 @@ - #ifndef __ASM_MIPS_ADDRSPACE_H - #define __ASM_MIPS_ADDRSPACE_H - -+#include -+ - /* - * Configure language - */ -@@ -102,4 +104,11 @@ - #define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK) - #define PHYS_TO_XKPHYS(cm,a) (0x8000000000000000 | ((cm)<<59) | (a)) - -+#ifdef CONFIG_AR7_MEMORY -+#define PHYS_OFFSET ((unsigned long)(CONFIG_AR7_MEMORY)) -+#else -+#define PHYS_OFFSET (0) -+#endif -+#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) -+ - #endif /* __ASM_MIPS_ADDRSPACE_H */ -diff -urN linux.old/include/asm-mips/ar7/adam2_env.h linux.dev/include/asm-mips/ar7/adam2_env.h ---- linux.old/include/asm-mips/ar7/adam2_env.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/adam2_env.h 2005-11-10 01:10:46.067588500 +0100 -@@ -0,0 +1,13 @@ -+#ifndef _INCLUDE_ASM_AR7_ADAM2_ENV_H_ -+#define _INCLUDE_ASM_AR7_ADAM2_ENV_H_ -+ -+/* Environment variable */ -+typedef struct { -+ char *name; -+ char *val; -+} t_env_var; -+ -+char *prom_getenv(char *); -+t_env_var *prom_iterenv(t_env_var *); -+ -+#endif /* _INCLUDE_ASM_AR7_ADAM2_ENV_H_ */ -diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h ---- linux.old/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/ar7.h 2005-11-10 01:10:46.067588500 +0100 -@@ -0,0 +1,33 @@ -+/* -+ * $Id$ -+ * Copyright (C) $Date$ $Author$ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * -+ */ -+ -+#ifndef _AR7_H -+#define _AR7_H -+ -+#include -+#include -+ -+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(CONFIG_AR7_MEMORY)) -+ -+#define AR7_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) -+#define AR7_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) -+#define AR7_BASE_BAUD ( 3686400 / 16 ) -+ -+#endif -diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm-mips/ar7/avalanche_intc.h ---- linux.old/include/asm-mips/ar7/avalanche_intc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_intc.h 2005-11-10 01:10:46.067588500 +0100 -@@ -0,0 +1,292 @@ -+ /* -+ * Nitin Dhingra, iamnd@ti.com -+ * Copyright (C) 2000 Texas Instruments Inc. -+ * -+ * -+ * ######################################################################## -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * ######################################################################## -+ * -+ * Defines of the Sead board specific address-MAP, registers, etc. -+ * -+ */ -+#ifndef _AVALANCHE_INTC_H -+#define _AVALANCHE_INTC_H -+ -+#include -+ -+/* ----- */ -+ -+#define KSEG1_BASE 0xA0000000 -+#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */ -+#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK) -+#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE) -+#define AVALANCHE_INTC_BASE PHYS_TO_K1(0x08612400) -+ -+/* ----- */ -+ -+#define MIPS_EXCEPTION_OFFSET 8 -+ -+/****************************************************************************** -+ Avalanche Interrupt number -+******************************************************************************/ -+#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET) -+ -+/******************************************************************************* -+*Linux Interrupt number -+*******************************************************************************/ -+#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET) -+ -+ -+ -+#define AVALANCHE_INT_END_PRIMARY (40 + MIPS_EXCEPTION_OFFSET) -+#define AVALANCHE_INT_END_SECONDARY (32 + MIPS_EXCEPTION_OFFSET) -+ -+#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET) -+#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET) -+ -+#define AVALANCHE_INTC_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \ -+ AVINTNUM(AVALANCHE_INT_END_SECONDARY) + \ -+ MIPS_EXCEPTION_OFFSET) -+ -+#if defined(CONFIG_AR7_VLYNQ) -+#define AVALANCHE_INT_END_LOW_VLYNQ (AVALANCHE_INTC_END + 32) -+#define AVALANCHE_INT_END_VLYNQ (AVALANCHE_INTC_END + 32 * CONFIG_AR7_VLYNQ_PORTS) -+#define AVALANCHE_INT_END AVALANCHE_INT_END_VLYNQ -+#else -+#define AVALANCHE_INT_END AVALANCHE_INTC_END -+#endif -+ -+ -+/* -+ * Avalanche interrupt controller register base (primary) -+ */ -+#define AVALANCHE_ICTRL_REGS_BASE AVALANCHE_INTC_BASE -+ -+/****************************************************************************** -+ * Avalanche exception controller register base (secondary) -+ ******************************************************************************/ -+#define AVALANCHE_ECTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x80) -+ -+ -+/****************************************************************************** -+ * Avalanche Interrupt pacing register base (secondary) -+ ******************************************************************************/ -+#define AVALANCHE_IPACE_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0xA0) -+ -+ -+ -+/****************************************************************************** -+ * Avalanche Interrupt Channel Control register base -+ *****************************************************************************/ -+#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200) -+ -+ -+struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */ -+{ -+ volatile unsigned long intsr1; /* Interrupt Status/Set Register 1 0x00 */ -+ volatile unsigned long intsr2; /* Interrupt Status/Set Register 2 0x04 */ -+ volatile unsigned long unused1; /*0x08 */ -+ volatile unsigned long unused2; /*0x0C */ -+ volatile unsigned long intcr1; /* Interrupt Clear Register 1 0x10 */ -+ volatile unsigned long intcr2; /* Interrupt Clear Register 2 0x14 */ -+ volatile unsigned long unused3; /*0x18 */ -+ volatile unsigned long unused4; /*0x1C */ -+ volatile unsigned long intesr1; /* Interrupt Enable (Set) Register 1 0x20 */ -+ volatile unsigned long intesr2; /* Interrupt Enable (Set) Register 2 0x24 */ -+ volatile unsigned long unused5; /*0x28 */ -+ volatile unsigned long unused6; /*0x2C */ -+ volatile unsigned long intecr1; /* Interrupt Enable Clear Register 1 0x30 */ -+ volatile unsigned long intecr2; /* Interrupt Enable Clear Register 2 0x34 */ -+ volatile unsigned long unused7; /* 0x38 */ -+ volatile unsigned long unused8; /* 0x3c */ -+ volatile unsigned long pintir; /* Priority Interrupt Index Register 0x40 */ -+ volatile unsigned long intmsr; /* Priority Interrupt Mask Index Reg 0x44 */ -+ volatile unsigned long unused9; /* 0x48 */ -+ volatile unsigned long unused10; /* 0x4C */ -+ volatile unsigned long intpolr1; /* Interrupt Polarity Mask register 10x50 */ -+ volatile unsigned long intpolr2; /* Interrupt Polarity Mask register 20x54 */ -+ volatile unsigned long unused11; /* 0x58 */ -+ volatile unsigned long unused12; /*0x5C */ -+ volatile unsigned long inttypr1; /* Interrupt Type Mask register 10x60 */ -+ volatile unsigned long inttypr2; /* Interrupt Type Mask register 20x64 */ -+}; -+ -+struct avalanche_exctrl_regs /* Avalanche Exception control registers */ -+{ -+ volatile unsigned long exsr; /* Exceptions Status/Set register 0x80 */ -+ volatile unsigned long reserved; /*0x84 */ -+ volatile unsigned long excr; /* Exceptions Clear Register 0x88 */ -+ volatile unsigned long reserved1; /*0x8c */ -+ volatile unsigned long exiesr; /* Exceptions Interrupt Enable (set) 0x90 */ -+ volatile unsigned long reserved2; /*0x94 */ -+ volatile unsigned long exiecr; /* Exceptions Interrupt Enable(clear)0x98 */ -+}; -+struct avalanche_ipace_regs -+{ -+ -+ volatile unsigned long ipacep; /* Interrupt pacing register 0xa0 */ -+ volatile unsigned long ipacemap; /*Interrupt Pacing Map Register 0xa4 */ -+ volatile unsigned long ipacemax; /*Interrupt Pacing Max Register 0xa8 */ -+}; -+struct avalanche_channel_int_number -+{ -+ volatile unsigned long cintnr0; /* Channel Interrupt Number Register0x200 */ -+ volatile unsigned long cintnr1; /* Channel Interrupt Number Register0x204 */ -+ volatile unsigned long cintnr2; /* Channel Interrupt Number Register0x208 */ -+ volatile unsigned long cintnr3; /* Channel Interrupt Number Register0x20C */ -+ volatile unsigned long cintnr4; /* Channel Interrupt Number Register0x210 */ -+ volatile unsigned long cintnr5; /* Channel Interrupt Number Register0x214 */ -+ volatile unsigned long cintnr6; /* Channel Interrupt Number Register0x218 */ -+ volatile unsigned long cintnr7; /* Channel Interrupt Number Register0x21C */ -+ volatile unsigned long cintnr8; /* Channel Interrupt Number Register0x220 */ -+ volatile unsigned long cintnr9; /* Channel Interrupt Number Register0x224 */ -+ volatile unsigned long cintnr10; /* Channel Interrupt Number Register0x228 */ -+ volatile unsigned long cintnr11; /* Channel Interrupt Number Register0x22C */ -+ volatile unsigned long cintnr12; /* Channel Interrupt Number Register0x230 */ -+ volatile unsigned long cintnr13; /* Channel Interrupt Number Register0x234 */ -+ volatile unsigned long cintnr14; /* Channel Interrupt Number Register0x238 */ -+ volatile unsigned long cintnr15; /* Channel Interrupt Number Register0x23C */ -+ volatile unsigned long cintnr16; /* Channel Interrupt Number Register0x240 */ -+ volatile unsigned long cintnr17; /* Channel Interrupt Number Register0x244 */ -+ volatile unsigned long cintnr18; /* Channel Interrupt Number Register0x248 */ -+ volatile unsigned long cintnr19; /* Channel Interrupt Number Register0x24C */ -+ volatile unsigned long cintnr20; /* Channel Interrupt Number Register0x250 */ -+ volatile unsigned long cintnr21; /* Channel Interrupt Number Register0x254 */ -+ volatile unsigned long cintnr22; /* Channel Interrupt Number Register0x358 */ -+ volatile unsigned long cintnr23; /* Channel Interrupt Number Register0x35C */ -+ volatile unsigned long cintnr24; /* Channel Interrupt Number Register0x260 */ -+ volatile unsigned long cintnr25; /* Channel Interrupt Number Register0x264 */ -+ volatile unsigned long cintnr26; /* Channel Interrupt Number Register0x268 */ -+ volatile unsigned long cintnr27; /* Channel Interrupt Number Register0x26C */ -+ volatile unsigned long cintnr28; /* Channel Interrupt Number Register0x270 */ -+ volatile unsigned long cintnr29; /* Channel Interrupt Number Register0x274 */ -+ volatile unsigned long cintnr30; /* Channel Interrupt Number Register0x278 */ -+ volatile unsigned long cintnr31; /* Channel Interrupt Number Register0x27C */ -+ volatile unsigned long cintnr32; /* Channel Interrupt Number Register0x280 */ -+ volatile unsigned long cintnr33; /* Channel Interrupt Number Register0x284 */ -+ volatile unsigned long cintnr34; /* Channel Interrupt Number Register0x288 */ -+ volatile unsigned long cintnr35; /* Channel Interrupt Number Register0x28C */ -+ volatile unsigned long cintnr36; /* Channel Interrupt Number Register0x290 */ -+ volatile unsigned long cintnr37; /* Channel Interrupt Number Register0x294 */ -+ volatile unsigned long cintnr38; /* Channel Interrupt Number Register0x298 */ -+ volatile unsigned long cintnr39; /* Channel Interrupt Number Register0x29C */ -+}; -+ -+struct avalanche_interrupt_line_to_channel -+{ -+ unsigned long int_line0; /* Start of primary interrupts */ -+ unsigned long int_line1; -+ unsigned long int_line2; -+ unsigned long int_line3; -+ unsigned long int_line4; -+ unsigned long int_line5; -+ unsigned long int_line6; -+ unsigned long int_line7; -+ unsigned long int_line8; -+ unsigned long int_line9; -+ unsigned long int_line10; -+ unsigned long int_line11; -+ unsigned long int_line12; -+ unsigned long int_line13; -+ unsigned long int_line14; -+ unsigned long int_line15; -+ unsigned long int_line16; -+ unsigned long int_line17; -+ unsigned long int_line18; -+ unsigned long int_line19; -+ unsigned long int_line20; -+ unsigned long int_line21; -+ unsigned long int_line22; -+ unsigned long int_line23; -+ unsigned long int_line24; -+ unsigned long int_line25; -+ unsigned long int_line26; -+ unsigned long int_line27; -+ unsigned long int_line28; -+ unsigned long int_line29; -+ unsigned long int_line30; -+ unsigned long int_line31; -+ unsigned long int_line32; -+ unsigned long int_line33; -+ unsigned long int_line34; -+ unsigned long int_line35; -+ unsigned long int_line36; -+ unsigned long int_line37; -+ unsigned long int_line38; -+ unsigned long int_line39; -+}; -+ -+ -+/* Interrupt Line #'s (Sangam peripherals) */ -+ -+/*------------------------------*/ -+/* Sangam primary interrupts */ -+/*------------------------------*/ -+ -+#define UNIFIED_SECONDARY_INTERRUPT 0 -+#define AVALANCHE_EXT_INT_0 1 -+#define AVALANCHE_EXT_INT_1 2 -+/* Line #3 Reserved */ -+/* Line #4 Reserved */ -+#define AVALANCHE_TIMER_0_INT 5 -+#define AVALANCHE_TIMER_1_INT 6 -+#define AVALANCHE_UART0_INT 7 -+#define AVALANCHE_UART1_INT 8 -+#define AVALANCHE_PDMA_INT0 9 -+#define AVALANCHE_PDMA_INT1 10 -+/* Line #11 Reserved */ -+/* Line #12 Reserved */ -+/* Line #13 Reserved */ -+/* Line #14 Reserved */ -+#define AVALANCHE_ATM_SAR_INT 15 -+/* Line #16 Reserved */ -+/* Line #17 Reserved */ -+/* Line #18 Reserved */ -+#define AVALANCHE_MAC0_INT 19 -+/* Line #20 Reserved */ -+#define AVALANCHE_VLYNQ0_INT 21 -+#define AVALANCHE_CODEC_WAKE_INT 22 -+/* Line #23 Reserved */ -+#define AVALANCHE_USB_INT 24 -+#define AVALANCHE_VLYNQ1_INT 25 -+/* Line #26 Reserved */ -+/* Line #27 Reserved */ -+#define AVALANCHE_MAC1_INT 28 -+#define AVALANCHE_I2CM_INT 29 -+#define AVALANCHE_PDMA_INT2 30 -+#define AVALANCHE_PDMA_INT3 31 -+/* Line #32 Reserved */ -+/* Line #33 Reserved */ -+/* Line #34 Reserved */ -+/* Line #35 Reserved */ -+/* Line #36 Reserved */ -+#define AVALANCHE_VDMA_VT_RX_INT 37 -+#define AVALANCHE_VDMA_VT_TX_INT 38 -+#define AVALANCHE_ADSLSS_INT 39 -+ -+/*-----------------------------------*/ -+/* Sangam Secondary Interrupts */ -+/*-----------------------------------*/ -+#define PRIMARY_INTS 40 -+ -+#define EMIF_INT (7 + PRIMARY_INTS) -+ -+ -+extern void avalanche_int_set(int channel, int line); -+ -+ -+#endif /* _AVALANCHE_INTC_H */ -diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm-mips/ar7/avalanche_misc.h ---- linux.old/include/asm-mips/ar7/avalanche_misc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_misc.h 2005-11-10 01:10:46.067588500 +0100 -@@ -0,0 +1,174 @@ -+#ifndef _AVALANCHE_MISC_H_ -+#define _AVALANCHE_MISC_H_ -+ -+typedef enum AVALANCHE_ERR_t -+{ -+ AVALANCHE_ERR_OK = 0, /* OK or SUCCESS */ -+ AVALANCHE_ERR_ERROR = -1, /* Unspecified/Generic ERROR */ -+ -+ /* Pointers and args */ -+ AVALANCHE_ERR_INVARG = -2, /* Invaild argument to the call */ -+ AVALANCHE_ERR_NULLPTR = -3, /* NULL pointer */ -+ AVALANCHE_ERR_BADPTR = -4, /* Bad (out of mem) pointer */ -+ -+ /* Memory issues */ -+ AVALANCHE_ERR_ALLOC_FAIL = -10, /* allocation failed */ -+ AVALANCHE_ERR_FREE_FAIL = -11, /* free failed */ -+ AVALANCHE_ERR_MEM_CORRUPT = -12, /* corrupted memory */ -+ AVALANCHE_ERR_BUF_LINK = -13, /* buffer linking failed */ -+ -+ /* Device issues */ -+ AVALANCHE_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */ -+ AVALANCHE_ERR_DEVICE_MALFUNC = -21, /* device malfunction */ -+ -+ AVALANCHE_ERR_INVID = -30 /* Invalid ID */ -+ -+} AVALANCHE_ERR; -+ -+/***************************************************************************** -+ * Reset Control Module -+ *****************************************************************************/ -+ -+typedef enum AVALANCHE_RESET_MODULE_tag -+{ -+ RESET_MODULE_UART0 = 0, -+ RESET_MODULE_UART1 = 1, -+ RESET_MODULE_I2C = 2, -+ RESET_MODULE_TIMER0 = 3, -+ RESET_MODULE_TIMER1 = 4, -+ RESET_MODULE_GPIO = 6, -+ RESET_MODULE_ADSLSS = 7, -+ RESET_MODULE_USBS = 8, -+ RESET_MODULE_SAR = 9, -+ RESET_MODULE_VDMA_VT = 11, -+ RESET_MODULE_FSER = 12, -+ RESET_MODULE_VLYNQ1 = 16, -+ RESET_MODULE_EMAC0 = 17, -+ RESET_MODULE_DMA = 18, -+ RESET_MODULE_BIST = 19, -+ RESET_MODULE_VLYNQ0 = 20, -+ RESET_MODULE_EMAC1 = 21, -+ RESET_MODULE_MDIO = 22, -+ RESET_MODULE_ADSLSS_DSP = 23, -+ RESET_MODULE_EPHY = 26 -+} AVALANCHE_RESET_MODULE_T; -+ -+typedef enum AVALANCHE_RESET_CTRL_tag -+{ -+ IN_RESET = 0, -+ OUT_OF_RESET -+} AVALANCHE_RESET_CTRL_T; -+ -+typedef enum AVALANCHE_SYS_RST_MODE_tag -+{ -+ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */ -+ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */ -+} AVALANCHE_SYS_RST_MODE_T; -+ -+typedef enum AVALANCHE_SYS_RESET_STATUS_tag -+{ -+ HARDWARE_RESET = 0, -+ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */ -+ WATCHDOG_RESET, -+ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */ -+} AVALANCHE_SYS_RESET_STATUS_T; -+ -+AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(AVALANCHE_RESET_MODULE_T reset_module); -+void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode); -+AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status(void); -+ -+typedef int (*REMOTE_VLYNQ_DEV_RESET_CTRL_FN)(unsigned int reset_module, AVALANCHE_RESET_CTRL_T reset_ctrl); -+ -+/***************************************************************************** -+ * Power Control Module -+ *****************************************************************************/ -+ -+typedef enum AVALANCHE_POWER_CTRL_tag -+{ -+ POWER_CTRL_POWER_UP = 0, -+ POWER_CTRL_POWER_DOWN -+} AVALANCHE_POWER_CTRL_T; -+ -+typedef enum AVALANCHE_SYS_POWER_MODE_tag -+{ -+ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */ -+ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */ -+ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */ -+ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */ -+} AVALANCHE_SYS_POWER_MODE_T; -+ -+void avalanche_power_ctrl(unsigned int power_module, AVALANCHE_POWER_CTRL_T power_ctrl); -+AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int power_module); -+void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode); -+AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void); -+ -+/***************************************************************************** -+ * Wakeup Control -+ *****************************************************************************/ -+ -+typedef enum AVALANCHE_WAKEUP_INTERRUPT_tag -+{ -+ WAKEUP_INT0 = 1, -+ WAKEUP_INT1 = 2, -+ WAKEUP_INT2 = 4, -+ WAKEUP_INT3 = 8 -+} AVALANCHE_WAKEUP_INTERRUPT_T; -+ -+typedef enum TNETV1050_WAKEUP_CTRL_tag -+{ -+ WAKEUP_DISABLED = 0, -+ WAKEUP_ENABLED -+} AVALANCHE_WAKEUP_CTRL_T; -+ -+typedef enum TNETV1050_WAKEUP_POLARITY_tag -+{ -+ WAKEUP_ACTIVE_HIGH = 0, -+ WAKEUP_ACTIVE_LOW -+} AVALANCHE_WAKEUP_POLARITY_T; -+ -+void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int, -+ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl, -+ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity); -+ -+/***************************************************************************** -+ * GPIO Control -+ *****************************************************************************/ -+ -+typedef enum AVALANCHE_GPIO_PIN_MODE_tag -+{ -+ FUNCTIONAL_PIN = 0, -+ GPIO_PIN = 1 -+} AVALANCHE_GPIO_PIN_MODE_T; -+ -+typedef enum AVALANCHE_GPIO_PIN_DIRECTION_tag -+{ -+ GPIO_OUTPUT_PIN = 0, -+ GPIO_INPUT_PIN = 1 -+} AVALANCHE_GPIO_PIN_DIRECTION_T; -+ -+typedef enum { GPIO_FALSE, GPIO_TRUE } AVALANCHE_GPIO_BOOL_T; -+ -+void avalanche_gpio_init(void); -+int avalanche_gpio_ctrl(unsigned int gpio_pin, -+ AVALANCHE_GPIO_PIN_MODE_T pin_mode, -+ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction); -+int avalanche_gpio_ctrl_with_link_count(unsigned int gpio_pin, -+ AVALANCHE_GPIO_PIN_MODE_T pin_mode, -+ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction); -+int avalanche_gpio_out_bit(unsigned int gpio_pin, int value); -+int avalanche_gpio_in_bit(unsigned int gpio_pin); -+int avalanche_gpio_out_value(unsigned int out_val, unsigned int set_mask, unsigned int reg_index); -+int avalanche_gpio_out_value_with_link_count(unsigned int out_val, unsigned int set_mask, unsigned int reg_index); -+int avalanche_gpio_in_value(unsigned int *in_val, unsigned int reg_index); -+ -+unsigned int avalanche_get_chip_version_info(void); -+ -+unsigned int avalanche_get_vbus_freq(void); -+void avalanche_set_vbus_freq(unsigned int); -+ -+ -+typedef int (*SET_MDIX_ON_CHIP_FN_T)(unsigned int base_addr, unsigned int operation); -+int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation); -+unsigned int avalanche_is_mdix_on_chip(void); -+ -+#endif -diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm-mips/ar7/avalanche_regs.h ---- linux.old/include/asm-mips/ar7/avalanche_regs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_regs.h 2005-11-10 01:10:46.071588750 +0100 -@@ -0,0 +1,567 @@ -+/* -+ * $Id$ -+ * Avalanche Register Descriptions -+ * -+ * Jeff Harrell, jharrell@ti.com -+ * 2000 (c) Texas Instruments Inc. -+ */ -+ -+#ifndef __AVALANCHE_REGS_H -+#define __AVALANCHE_REGS_H -+ -+#include -+#include -+ -+/*----------------------------------------*/ -+/* Base offsets within the Avalanche ASIC */ -+/*----------------------------------------*/ -+ -+#define BBIF_SPACE0 (KSEG1ADDR(0x01000000)) -+#define BBIF_SPACE1 (KSEG1ADDR(0x01800000)) -+#define BBIF_CONTROL (KSEG1ADDR(0x02000000)) -+#define ATM_SAR_BASE (KSEG1ADDR(0x03000000)) -+#define USB_MCU_BASE (KSEG1ADDR(0x03400000)) -+#define DES_BASE (KSEG1ADDR(0x08600000)) -+#define ETH_MACA_BASE (KSEG1ADDR(0x08610000)) -+#define ETH_MACB_BASE (KSEG1ADDR(0x08612800)) -+#define MEM_CTRLR_BASE (KSEG1ADDR(0x08610800)) -+#define GPIO_BASE (KSEG1ADDR(0x08610900)) -+#define CLK_CTRL_BASE (KSEG1ADDR(0x08610A00)) -+#define WATCH_DOG_BASE (KSEG1ADDR(0x08610B00)) -+#define TMR1_BASE (KSEG1ADDR(0x08610C00)) -+#define TRM2_BASE (KSEG1ADDR(0x08610D00)) -+#define UARTA_BASE (KSEG1ADDR(0x08610E00)) -+#define UARTB_BASE (KSEG1ADDR(0x08610F00)) -+#define I2C_BASE (KSEG1ADDR(0x08611000)) -+#define DEV_ID_BASE (KSEG1ADDR(0x08611100)) -+#define USB_BASE (KSEG1ADDR(0x08611200)) -+#define PCI_CONFIG_BASE (KSEG1ADDR(0x08611300)) -+#define DMA_BASE (KSEG1ADDR(0x08611400)) -+#define RESET_CTRL_BASE (KSEG1ADDR(0x08611600)) -+#define DSL_IF_BASE (KSEG1ADDR(0x08611B00)) -+#define INT_CTL_BASE (KSEG1ADDR(0x08612400)) -+#define PHY_BASE (KSEG1ADDR(0x1E000000)) -+ -+/*---------------------------------*/ -+/* Device ID, chip version number */ -+/*---------------------------------*/ -+ -+#define AVALANCHE_CHVN (*(volatile unsigned int *)(DEV_ID_BASE+0x14)) -+#define AVALANCHE_DEVID1 (*(volatile unsigned int *)(DEV_ID_BASE+0x18)) -+#define AVALANCHE_DEVID2 (*(volatile unsigned int *)(DEV_ID_BASE+0x1C)) -+ -+/*----------------------------------*/ -+/* Reset Control VW changed to ptrs */ -+/*----------------------------------*/ -+ -+#define AVALANCHE_PRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x0)) /* Peripheral reset control */ -+#define AVALANCHE_SWRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x4)) /* Software reset control */ -+#define AVALANCHE_RSR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x8)) /* Reset status register */ -+ -+/* reset control bits */ -+ -+#define AV_RST_UART0 (1<<0) /* Brings UART0 out of reset */ -+#define AV_RST_UART1 (1<<1) /* Brings UART1 out of reset */ -+#define AV_RST_IICM (1<<2) /* Brings the I2CM out of reset */ -+#define AV_RST_TIMER0 (1<<3) /* Brings Timer 0 out of reset */ -+#define AV_RST_TIMER1 (1<<4) /* Brings Timer 1 out of reset */ -+#define AV_RST_DES (1<<5) /* Brings the DES module out of reset */ -+#define AV_RST_GPIO (1<<6) /* Brings the GPIO module out of reset (see note below) */ -+/* -+ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE -+ If you reset the GPIO interface all of the directions (i/o) of the UART B -+ interface pins are inputs and must be reconfigured so as not to lose the -+ serial console interface -+ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE -+*/ -+#define AV_RST_BBIF (1<<7) /* Brings the Broadband interface out of reset */ -+#define AV_RST_USB (1<<8) /* Brings the USB module out of reset */ -+#define AV_RST_SAR (1<<9) /* Brings the SAR out of reset */ -+#define AV_RST_HDLC (1<<10) /* Brings the HDLC module out of reset */ -+#define AV_RST_PCI (1<<16) /* Brings the PCI module out of reset */ -+#define AV_RST_ETH_MAC0 (1<<17) /* Brings the Ethernet MAC0 out of reset */ -+#define AV_RST_PICO_DMA (1<<18) /* Brings the PICO DMA module out of reset */ -+#define AV_RST_BIST (1<<19) /* Brings the BIST module out of reset */ -+#define AV_RST_DSP (1<<20) /* Brings the DSP sub system out of reset */ -+#define AV_RST_ETH_MAC1 (1<<21) /* Brings the Ethernet MAC1 out of reset */ -+ -+/*----------------------*/ -+/* Physical interfaces */ -+/*----------------------*/ -+ -+/* Phy loopback */ -+#define PHY_LOOPBACK 1 -+ -+ -+/* Phy 0 */ -+#define PHY0BASE (PHY_BASE) -+#define PHY0RST (*(volatile unsigned char *) (PHY0BASE)) /* reset */ -+#define PHY0CTRL (*(volatile unsigned char *) (PHY0BASE+0x5)) /* control */ -+#define PHY0RACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x50)) /* RACP control/status */ -+#define PHY0TACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x60)) /* TACP idle/unassigned cell hdr */ -+#define PHY0RACPINT (*(volatile unsigned char *) (PHY0BASE+0x51)) /* RACP interrupt enable/Status */ -+ -+ -+/* Phy 1 */ -+ -+#define PHY1BASE (PHY_BASE + 0x100000) -+#define PHY1RST (*(volatile unsigned char *) (PHY1BASE)) /* reset */ -+#define PHY1CTRL (*(volatile unsigned char *) (PHY1BASE+0x5)) /* control */ -+#define PHY1RACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x50)) -+#define PHY1TACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x60)) -+#define PHY1RACPINT (*(volatile unsigned char *) (PHY1BASE+0x51)) -+ -+/* Phy 2 */ -+ -+#define PHY2BASE (PHY_BASE + 0x200000) -+#define PHY2RST (*(volatile unsigned char *) (PHY2BASE)) /* reset */ -+#define PHY2CTRL (*(volatile unsigned char *) (PHY2BASE+0x5)) /* control */ -+#define PHY2RACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x50)) -+#define PHY2TACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x60)) -+#define PHY2RACPINT (*(volatile unsigned char *) (PHY2BASE+0x51)) -+ -+/*-------------------*/ -+/* Avalanche ATM SAR */ -+/*-------------------*/ -+ -+#define AVSAR_SYSCONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000000)) /* SAR system config register */ -+#define AVSAR_SYSSTATUS (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000004)) /* SAR system status register */ -+#define AVSAR_INT_ENABLE (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000008)) /* SAR interrupt enable register */ -+#define AVSAR_CONN_VPI_VCI (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000000c)) /* VPI/VCI connection config */ -+#define AVSAR_CONN_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000010)) /* Connection config register */ -+#define AVSAR_OAM_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018)) /* OAM configuration register */ -+ -+/* Transmit completion ring registers */ -+ -+#define AVSAR_TCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000100)) -+#define AVSAR_TCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000104)) -+#define AVSAR_TCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000108)) -+#define AVSAR_TCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000010c)) -+#define AVSAR_TCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000110)) -+#define AVSAR_TCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000114)) -+#define AVSAR_TCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000118)) -+#define AVSAR_TCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000011c)) -+#define AVSAR_TCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000120)) -+#define AVSAR_TCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000124)) -+#define AVSAR_TCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000128)) -+#define AVSAR_TCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000012c)) -+#define AVSAR_TCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000130)) -+#define AVSAR_TCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000134)) -+ -+/* Transmit Queue Packet registers */ -+#define AVSAR_TXQUEUE_PKT0 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000140)) -+#define AVSAR_TXQUEUE_PKT1 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000144)) -+#define AVSAR_TXQUEUE_PKT2 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000148)) -+#define AVSAR_TX_FLUSH (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000014C)) -+/* Receive completion ring registers */ -+ -+#define AVSAR_RCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000200)) -+#define AVSAR_RCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000204)) -+#define AVSAR_RCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000208)) -+#define AVSAR_RCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000020c)) -+#define AVSAR_RCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000210)) -+#define AVSAR_RCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000214)) -+#define AVSAR_RCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000218)) -+#define AVSAR_RCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000021c)) -+#define AVSAR_RCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000220)) -+#define AVSAR_RCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000224)) -+#define AVSAR_RCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000228)) -+#define AVSAR_RCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000022c)) -+#define AVSAR_RCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000230)) -+#define AVSAR_RCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000234)) -+ -+#define AVSAR_RXFBL_ADD0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000240)) /* Rx Free buffer list add 0 */ -+#define AVSAR_RXFBL_ADD1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000244)) /* Rx Free buffer list add 1 */ -+#define AVSAR_RXFBL_ADD2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000248)) /* Rx Free buffer list add 2 */ -+#define AVSAR_RXFBLSIZE_0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000028c)) /* Rx Free buffer list size 0 */ -+#define AVSAR_RXFBLSIZE_1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000029c)) /* Rx Free buffer list size 1 */ -+#define AVSAR_RXFBLSIZE_2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002ac)) /* Rx Free buffer list size 2 */ -+#define AVSAR_RXFBLSIZE_3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002bc)) /* Rx Free buffer list size 3 */ -+ -+ -+#if defined(CONFIG_MIPS_EVM3D) || defined(CONFIG_MIPS_AR5D01) || defined(CONFIG_MIPS_AR5W01) -+ -+#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010480)) -+#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010484)) -+#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010488)) -+#define AVSAR_OAM_CPID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E0)) -+#define AVSAR_OAM_LLID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F0)) -+#define AVSAR_OAM_CPID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E4)) -+#define AVSAR_OAM_LLID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F4)) -+#define AVSAR_OAM_CPID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E8)) -+#define AVSAR_OAM_LLID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F8)) -+#define AVSAR_OAM_CPID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104EC)) -+#define AVSAR_OAM_LLID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104FC)) -+#define AVSAR_OAM_CORR_TAG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010500)) -+#define AVSAR_OAM_FAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010520)) -+#define AVSAR_OAM_NEAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010540)) -+#define AVSAR_OAM_CONFIG_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018)) -+#define AVSAR_FAIRNESS_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104B8)) -+#define AVSAR_UBR_PCR_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010490)) -+ -+ -+/* -+ -+#define OAM_CPID_ADD 0xa30104e0 -+ -+#define OAM_LLID_ADD 0xa30104f0 -+ -+#define OAM_LLID_VAL 0xffffffff -+ -+#define OAM_CORR_TAG 0xa3010500 -+ -+#define OAM_FAR_COUNT_ADD 0xa3010520 -+ -+#define OAM_NEAR_COUNT_ADD 0xa3010540 -+ -+#define OAM_CONFIG_REG_ADD 0xa3000018 -+*/ -+ -+ -+#else /* CONFIG_MIPS_EVM3 || CONFIG_MIPS_ACPEP */ -+ -+#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012000)) -+#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012004)) -+#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012008)) -+#define AVSAR_OAM_CPID (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012300)) -+ -+#endif /* CONFIG_MIPS_EVM3D || CONFIG_MIPS_AR5D01 || CONFIG_MIPS_AR5W01 */ -+ -+ -+#define AVSAR_STATE_RAM (ATM_SAR_BASE + 0x010000) /* SAR state RAM */ -+#define AVSAR_PDSP_BASE (ATM_SAR_BASE + 0x020000) /* SAR PDSP base address */ -+#define AVSAR_TXDMA_BASE (ATM_SAR_BASE + 0x030000) /* Transmit DMA state base */ -+#define AVSAR_TDMASTATE6 0x18 /* Transmit DMA state word 6 */ -+#define AVSAR_RXDMA_BASE (ATM_SAR_BASE + 0x040000) /* Receive DMA state base */ -+#define AVSAR_RDMASTATE0 0x0 /* Receive DMA state word 0 */ -+ -+/*------------------------------------------*/ -+/* DSL Interface */ -+/*------------------------------------------*/ -+ -+#define AVDSL_TX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000000)) -+#define AVDSL_RX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000004)) -+#define AVDSL_POLL (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000008)) -+ -+/* Fast */ -+ -+#define AVDSL_TX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000000C)) -+#define AVDSL_TX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000010)) -+#define AVDSL_TX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000014)) -+#define AVDSL_TX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000018)) -+#define AVDSL_RX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000001C)) -+#define AVDSL_RX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000020)) -+#define AVDSL_RX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000024)) -+#define AVDSL_RX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000028)) -+ -+/* Interleaved */ -+ -+#define AVDSL_TX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000002C)) -+#define AVDSL_TX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000030)) -+#define AVDSL_TX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000034)) -+#define AVDSL_TX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000038)) -+#define AVDSL_RX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000003C)) -+#define AVDSL_RX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000040)) -+#define AVDSL_RX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000044)) -+#define AVDSL_RX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000048)) -+ -+/*------------------------------------------*/ -+/* Broadband I/F */ -+/*------------------------------------------*/ -+ -+#define AVBBIF_BBIF_CNTRL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000000)) -+#define AVBBIF_ADDR_TRANS_0 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000004)) -+#define AVBBIF_ADDR_TRANS_1 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000008)) -+#define AVBBIF_ADDR_XB_MX_BL (*(volatile unsigned int *)(BBIF_CONTROL + 0x0000000C)) -+#define AVBBIF_INFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000010)) -+#define AVBBIF_OUTFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000014)) -+ -+#define AVBBIF_DISABLED 0x0 -+#define AVBBIF_LBT4040_INT 0x1 -+#define AVBBIF_XBUS 0x2 -+#define AVBBIF_LBT4040_EXT 0x4 -+ -+#define AVBBIF_ADDR_MASK0 0xff000000 /* handles upper bits of BBIF 0 address */ -+#define AVBBIF_ADDR_MASK1 0xff800000 /* handles upper bits of BBIF 1 address */ -+#define AVBBIF_TRANS_MASK 0xff000000 -+/*------------------------------------------*/ -+/* GPIO I/F */ -+/*------------------------------------------*/ -+ -+#define GPIO_DATA_INPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000000)) -+#define GPIO_DATA_OUTPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000004)) -+#define GPIO_DATA_DIR (*(volatile unsigned int *)(GPIO_BASE + 0x00000008)) /* 0=output 1=input */ -+#define GPIO_DATA_ENABLE (*(volatile unsigned int *)(GPIO_BASE + 0x0000000C)) /* 0=GPIO Mux 1=GPIO */ -+ -+#define GPIO_0 (1<<21) -+#define GPIO_1 (1<<22) -+#define GPIO_2 (1<<23) -+#define GPIO_3 (1<<24) -+#define EINT_1 (1<<18) -+ -+/* -+ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE -+ If you reset the GPIO interface all of the directions (i/o) of the UART B -+ interface pins are inputs and must be reconfigured so as not to lose the -+ serial console interface -+ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE -+*/ -+ -+/*------------------------------------------*/ -+/* CLK_CTRL */ -+/*------------------------------------------*/ -+#define PERIPH_CLK_CTL (*(volatile unsigned int *)(CLK_CTRL_BASE + 0x00000004)) -+ -+#define PCLK_0_HALF_VBUS (0<<16) -+#define PCLK_EQ_INPUT (1<<16) -+#define BBIF_CLK_HALF_VBUS (0<<17) -+#define BBIF_CLK_EQ_VBUS (1<<17) -+#define BBIF_CLK_EQ_BBCLK (3<<17) -+#define DSP_MODCLK_DSPCLKI (0<<20) -+#define DSP_MODCLK_REFCLKI (1<<20) -+#define USB_CLK_EQ_USBCLKI (0<<21) -+#define USB_CLK_EQ_REFCLKI (1<<21) -+ -+/*------------------------------------------*/ -+/* PCI Control Registers */ -+/*------------------------------------------*/ -+#define PCIC_CONTROL (*(volatile unsigned int *)(PCI_CONFIG_BASE)) -+#define PCIC_CONTROL_CFG_DONE (1<<0) -+#define PCIC_CONTROL_DIS_SLAVE_TO (1<<1) -+#define PCIC_CONTROL_FORCE_DELAY_READ (1<<2) -+#define PCIC_CONTROL_FORCE_DELAY_READ_LINE (1<<3) -+#define PCIC_CONTROL_FORCE_DELAY_READ_MULT (1<<4) -+#define PCIC_CONTROL_MEM_SPACE_EN (1<<5) -+#define PCIC_CONTROL_MEM_MASK (1<<6) -+#define PCIC_CONTROL_IO_SPACE_EN (1<<7) -+#define PCIC_CONTROL_IO_MASK (1<<8) -+/* PCIC_CONTROL_RESERVED (1<<9) */ -+#define PCIC_CONTROL_BASE0_EN (1<<10) -+#define PCIC_CONTROL_BASE1_EN (1<<11) -+#define PCIC_CONTROL_BASE2_EN (1<<12) -+#define PCIC_CONTROL_HOLD_MASTER_WRITE (1<<13) -+#define PCIC_CONTROL_ARBITER_EN (1<<14) -+#define PCIC_INT_SOURCE (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000004)) -+#define PCIC_INT_SOURCE_PWR_MGMT (1<<0) -+#define PCIC_INT_SOURCE_PCI_TARGET (1<<1) -+#define PCIC_INT_SOURCE_PCI_MASTER (1<<2) -+#define PCIC_INT_SOURCE_POWER_WAKEUP (1<<3) -+#define PCIC_INT_SOURCE_PMEIN (1<<4) -+/* PCIC_INT_SOURCE_RESERVED (1<<5) */ -+/* PCIC_INT_SOURCE_RESERVED (1<<6) */ -+#define PCIC_INT_SOURCE_PIC_INTA (1<<7) -+#define PCIC_INT_SOURCE_PIC_INTB (1<<8) -+#define PCIC_INT_SOURCE_PIC_INTC (1<<9) -+#define PCIC_INT_SOURCE_PIC_INTD (1<<10) -+#define PCIC_INT_SOURCE_SOFT_INT0 (1<<11) -+#define PCIC_INT_SOURCE_SOFT_INT1 (1<<12) -+#define PCIC_INT_SOURCE_SOFT_INT2 (1<<13) -+#define PCIC_INT_SOURCE_SOFT_INT3 (1<<14) -+#define PCIC_INT_CLEAR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000008)) -+#define PCIC_INT_CLEAR_PM (1<<0) -+#define PCIC_INT_CLEAR_PCI_TARGET (1<<1) -+#define PCIC_INT_CLEAR_PCI_MASTER (1<<2) -+/* PCIC_INT_CLEAR_RESERVED (1<<3) */ -+#define PCIC_INT_CLEAR_PMEIN (1<<4) -+/* PCIC_INT_CLEAR_RESERVED (1<<5) */ -+/* PCIC_INT_CLEAR_RESERVED (1<<6) */ -+#define PCIC_INT_CLEAR_PCI_INTA (1<<7) -+#define PCIC_INT_CLEAR_PCI_INTB (1<<8) -+#define PCIC_INT_CLEAR_PCI_INTC (1<<9) -+#define PCIC_INT_CLEAR_PCI_INTD (1<<10) -+#define PCIC_INT_CLEAR_SOFT_INT0 (1<<11) -+#define PCIC_INT_CLEAR_SOFT_INT1 (1<<12) -+#define PCIC_INT_CLEAR_SOFT_INT2 (1<<13) -+#define PCIC_INT_CLEAR_SOFT_INT3 (1<<14) -+#define PCIC_INT_EN_AVAL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000000c)) -+#define PCIC_INT_EN_AVAL_PM (1<<0) -+#define PCIC_INT_EN_AVAL_PCI_TARGET (1<<1) -+#define PCIC_INT_EN_AVAL_PCI_MASTER (1<<2) -+/* PCIC_INT_EN_AVAL_RESERVED (1<<3) */ -+#define PCIC_INT_EN_AVAL_PMEIN (1<<4) -+/* PCIC_INT_EN_AVAL_RESERVED (1<<5) */ -+/* PCIC_INT_EN_AVAL_RESERVED (1<<6) */ -+#define PCIC_INT_EN_AVAL_PCI_INTA (1<<7) -+#define PCIC_INT_EN_AVAL_PCI_INTB (1<<8) -+#define PCIC_INT_EN_AVAL_PCI_INTC (1<<9) -+#define PCIC_INT_EN_AVAL_PCI_INTD (1<<10) -+#define PCIC_INT_EN_AVAL_SOFT_INT0 (1<<11) -+#define PCIC_INT_EN_AVAL_SOFT_INT1 (1<<12) -+#define PCIC_INT_EN_AVAL_SOFT_INT2 (1<<13) -+#define PCIC_INT_EN_AVAL_SOFT_INT3 (1<<14) -+#define PCIC_INT_EN_PCI (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000010)) -+#define PCIC_INT_EN_PCI_PM (1<<0) -+#define PCIC_INT_EN_PCI_PCI_TARGET (1<<1) -+#define PCIC_INT_EN_PCI_PCI_MASTER (1<<2) -+/* PCIC_INT_EN_PCI_RESERVED (1<<3) */ -+#define PCIC_INT_EN_PCI_PMEIN (1<<4) -+/* PCIC_INT_EN_PCI_RESERVED (1<<5) */ -+/* PCIC_INT_EN_PCI_RESERVED (1<<6) */ -+#define PCIC_INT_EN_PCI_PCI_INTA (1<<7) -+#define PCIC_INT_EN_PCI_PCI_INTB (1<<8) -+#define PCIC_INT_EN_PCI_PCI_INTC (1<<9) -+#define PCIC_INT_EN_PCI_PCI_INTD (1<<10) -+#define PCIC_INT_EN_PCI_SOFT_INT0 (1<<11) -+#define PCIC_INT_EN_PCI_SOFT_INT1 (1<<12) -+#define PCIC_INT_EN_PCI_SOFT_INT2 (1<<13) -+#define PCIC_INT_EN_PCI_SOFT_INT3 (1<<14) -+#define PCIC_INT_SWSET (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000014)) -+#define PCIC_INT_SWSET_SOFT_INT0 (1<<0) -+#define PCIC_INT_SWSET_SOFT_INT1 (1<<1) -+#define PCIC_INT_SWSET_SOFT_INT2 (1<<2) -+#define PCIC_INT_SWSET_SOFT_INT3 (1<<3) -+#define PCIC_PM_CTL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000018)) -+#define PCIC_PM_CTL_PWR_STATE_MASK (0x02) -+/* PCIC_PM_CTL_RESERVED (1<<2) */ -+/* PCIC_PM_CTL_RESERVED (1<<3) */ -+/* PCIC_PM_CTL_RESERVED (1<<4) */ -+/* PCIC_PM_CTL_RESERVED (1<<5) */ -+/* PCIC_PM_CTL_RESERVED (1<<6) */ -+/* PCIC_PM_CTL_RESERVED (1<<7) */ -+/* PCIC_PM_CTL_RESERVED (1<<8) */ -+/* PCIC_PM_CTL_RESERVED (1<<9) */ -+#define PCIC_PM_CTL_PWR_SUPPORT (1<<10) -+#define PCIC_PM_CTL_PMEIN (1<<11) -+#define PCIC_PM_CTL_CAP_MASK (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x0000001a)) -+#define PCIC_PM_CONSUME (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000001c)) -+#define PCIC_PM_CONSUME_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001c)) -+#define PCIC_PM_CONSUME_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001d)) -+#define PCIC_PM_CONSUME_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001e)) -+#define PCIC_PM_CONSUME_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001f)) -+#define PCIC_PM_DISSAPATED (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000020)) -+#define PCIC_PM_DISSAPATED_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000020)) -+#define PCIC_PM_DISSAPATED_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000021)) -+#define PCIC_PM_DISSAPATED_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000022)) -+#define PCIC_PM_DISSAPATED_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000023)) -+#define PCIC_PM_DATA_SCALE (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x00000024)) -+#define PCIC_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000028)) -+#define PCIC_SUB_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000002c)) -+#define PCIC_CLASS_REV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000030)) -+#define PCIC_MAX_MIN (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000034)) -+#define PCIC_MAST_MEM_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000003c)) -+#define PCIC_MAST_MEM_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000040)) -+#define PCIC_MAST_MEM_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000044)) -+#define PCIC_SLAVE_MASK0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000004c)) -+#define PCIC_SLAVE_MASK1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000050)) -+#define PCIC_SLAVE_MASK2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000054)) -+#define PCIC_SLAVE_BASE_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000058)) -+#define PCIC_SLAVE_BASE_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000005c)) -+#define PCIC_SLAVE_BASE_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000060)) -+#define PCIC_CONF_COMMAND (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000090)) -+#define PCIC_CONF_ADDR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000094)) -+#define PCIC_CONF_DATA (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000098)) -+ -+/*------------------------------------------*/ -+/* IIC_INTERFACE */ -+/*------------------------------------------*/ -+#define I2C_DATA_HI (*(volatile unsigned int *)(I2C_BASE + 0x0)) -+#define I2C_DATA_LOW (*(volatile unsigned int *)(I2C_BASE + 0x4)) -+#define I2C_CONFIG (*(volatile unsigned int *)(I2C_BASE + 0x8)) -+#define I2C_DATA_READ (*(volatile unsigned int *)(I2C_BASE + 0xC)) -+#define I2C_CLOCK_DIV (*(volatile unsigned int *)(I2C_BASE + 0x10)) -+ -+#define I2CWRITE 0x200 -+#define I2CREAD 0x300 -+#define I2C_END_BURST 0x400 -+ -+/* read bits */ -+#define I2C_READ_ERROR 0x8000 -+#define I2C_READ_COMPLETE 0x4000 -+#define I2C_READ_BUSY 0x2000 -+ -+/* device types */ -+#define I2C_IO_EXPANDER 0x2 -+#define I2C_RTC 0xd -+ -+/* device Addresses on I2C bus (EVM3) */ -+#define SEVEN_SEGMENT_DISP 0x23 /* Device type = 0x2, Addr = 3 */ -+#define EVM3_RTC 0xd0 /* Device type = 0xd, Addr = 0 */ -+#define EVM3_RTC_I2C_ADDR 0x0 -+ -+/*------------------------------------------*/ -+/* Ethernet MAC register offset definitions */ -+/*------------------------------------------*/ -+#define VMAC_DMACONFIG(X) (*(volatile unsigned int *)(X + 0x00000000)) -+#define VMAC_INTSTS(X) (*(volatile unsigned int *)(X + 0x00000004)) -+#define VMAC_INTMASK(X) (*(volatile unsigned int *)(X + 0x00000008)) -+ -+#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340)) -+#define VMAC_STATSBASE(X) (*(volatile unsigned int *)(X + 0x00000400)) -+ -+#define VMAC_TCRPTR(X) (*(volatile unsigned int *)(X + 0x00000100)) -+#define VMAC_TCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000104)) -+#define VMAC_TCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000108)) -+#define VMAC_TCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000010C)) -+#define VMAC_TCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000110)) -+#define VMAC_TCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000114)) -+#define VMAC_TCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000118)) -+#define VMAC_TXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000011c)) -+ -+ -+#define VMAC_TDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000120)) -+#define VMAC_TDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000124)) -+#define VMAC_TDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000128)) -+#define VMAC_TDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000012C)) -+#define VMAC_TDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000130)) -+#define VMAC_TDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000134)) -+#define VMAC_TDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000138)) -+#define VMAC_TDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000013C)) -+#define VMAC_TXPADDCNT(X) (*(volatile unsigned int *)(X + 0x00000140)) -+#define VMAC_TXPADDSTART(X) (*(volatile unsigned int *)(X + 0x00000144)) -+#define VMAC_TXPADDEND(X) (*(volatile unsigned int *)(X + 0x00000148)) -+#define VMAC_TXQFLUSH(X) (*(volatile unsigned int *)(X + 0x0000014C)) -+ -+#define VMAC_RCRPTR(X) (*(volatile unsigned int *)(X + 0x00000200)) -+#define VMAC_RCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000204)) -+#define VMAC_RCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000208)) -+#define VMAC_RCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000020C)) -+#define VMAC_RCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000210)) -+#define VMAC_RCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000214)) -+#define VMAC_RCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000218)) -+#define VMAC_RXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000021c)) -+ -+#define VMAC_RDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000220)) -+#define VMAC_RDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000224)) -+#define VMAC_RDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000228)) -+#define VMAC_RDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000022C)) -+#define VMAC_RDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000230)) -+#define VMAC_RDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000234)) -+#define VMAC_RDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000238)) -+#define VMAC_RDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000023C)) -+#define VMAC_FBLADDCNT(X) (*(volatile unsigned int *)(X + 0x00000240)) -+#define VMAC_FBLADDSTART(X) (*(volatile unsigned int *)(X + 0x00000244)) -+#define VMAC_FBLADDEND(X) (*(volatile unsigned int *)(X + 0x00000248)) -+#define VMAC_RXONOFF(X) (*(volatile unsigned int *)(X + 0x0000024C)) -+ -+#define VMAC_FBL0NEXTD(X) (*(volatile unsigned int *)(X + 0x00000280)) -+#define VMAC_FBL0LASTD(X) (*(volatile unsigned int *)(X + 0x00000284)) -+#define VMAC_FBL0COUNTD(X) (*(volatile unsigned int *)(X + 0x00000288)) -+#define VMAC_FBL0BUFSIZE(X) (*(volatile unsigned int *)(X + 0x0000028C)) -+ -+#define VMAC_MACCONTROL(X) (*(volatile unsigned int *)(X + 0x00000300)) -+#define VMAC_MACSTATUS(X) (*(volatile unsigned int *)(X + 0x00000304)) -+#define VMAC_MACADDRHI(X) (*(volatile unsigned int *)(X + 0x00000308)) -+#define VMAC_MACADDRLO(X) (*(volatile unsigned int *)(X + 0x0000030C)) -+#define VMAC_MACHASH1(X) (*(volatile unsigned int *)(X + 0x00000310)) -+#define VMAC_MACHASH2(X) (*(volatile unsigned int *)(X + 0x00000314)) -+ -+#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340)) -+#define VMAC_BOFTEST(X) (*(volatile unsigned int *)(X + 0x00000344)) -+#define VMAC_PACTEST(X) (*(volatile unsigned int *)(X + 0x00000348)) -+#define VMAC_PAUSEOP(X) (*(volatile unsigned int *)(X + 0x0000034C)) -+ -+#define VMAC_MDIOCONTROL(X) (*(volatile unsigned int *)(X + 0x00000380)) -+#define VMAC_MDIOUSERACCESS(X) (*(volatile unsigned int *)(X +0x00000384)) -+#define VMAC_MDIOACK(X) (*(volatile unsigned int *)(X + 0x00000388)) -+#define VMAC_MDIOLINK(X) (*(volatile unsigned int *)(X + 0x0000038C)) -+#define VMAC_MDIOMACPHY(X) (*(volatile unsigned int *)(X + 0x00000390)) -+ -+#define VMAC_STATS_BASE(X) (X + 0x00000400) -+ -+#endif __AVALANCHE_REGS_H -+ -+ -+ -+ -+ -+ -diff -urN linux.old/include/asm-mips/ar7/avalanche_types.h linux.dev/include/asm-mips/ar7/avalanche_types.h ---- linux.old/include/asm-mips/ar7/avalanche_types.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_types.h 2005-11-10 01:10:46.071588750 +0100 -@@ -0,0 +1,126 @@ -+/*------------------------------------------------------------------------------------------*\ -+\*------------------------------------------------------------------------------------------*/ -+#ifndef _avalanche_types_h_ -+#define _avalanche_types_h_ -+ -+/*--- #include ---*/ -+#ifndef TRUE -+#define TRUE 1 -+#endif -+#ifndef FALSE -+#define FALSE 0 -+#endif -+#ifndef NULL -+#define NULL (void *)0 -+#endif -+ -+/*------------------------------------------------------------------------------------------*\ -+ * Typen für Texas GPL Module -+\*------------------------------------------------------------------------------------------*/ -+#ifndef __UINT8_T__ -+typedef unsigned char UINT8; -+#define __UINT8_T__ -+#endif -+ -+#ifndef __UCHAR_T__ -+typedef unsigned char UCHAR; -+#define __UCHAR_T__ -+#endif -+ -+#ifndef __INT8_T__ -+typedef signed char INT8; -+#define __INT8_T__ -+#endif -+ -+#ifndef __UINT16_T__ -+typedef unsigned short UINT16; -+#define __UINT16_T__ -+#endif -+ -+#ifndef __USHORT_T__ -+typedef unsigned short USHORT; -+#define __USHORT_T__ -+#endif -+ -+#ifndef __INT16_T__ -+typedef signed short INT16; -+#define __INT16_T__ -+#endif -+ -+#ifndef __UINT32_T__ -+typedef unsigned int UINT32; -+#define __UINT32_T__ -+#endif -+ -+#ifndef __UINT_T__ -+typedef unsigned int UINT; -+#define __UINT_T__ -+#endif -+ -+#ifndef __INT32_T__ -+typedef signed int INT32; -+#define __INT32_T__ -+#endif -+ -+#ifndef __ULONG_T__ -+typedef unsigned long ULONG; -+#define __ULONG_T__ -+#endif -+ -+#ifndef __BOOL_T__ -+typedef int BOOL; -+#define __BOOL_T__ -+#endif -+ -+#ifndef __STATUS_T__ -+typedef int STATUS; -+#define __STATUS_T__ -+#endif -+ -+/*------------------------------------------------------------------------------------------*\ -+\*------------------------------------------------------------------------------------------*/ -+typedef void (*p_vlynq_intr_cntrl_isr_t)(void *,void *,void *); -+typedef INT32 (*p_vlynq_interrupt_vector_set_t)(void *, UINT32, UINT32, INT32, INT32, INT32); -+typedef INT32 (*p_vlynq_interrupt_vector_cntl_t)(void *, UINT32, INT32, UINT32); -+typedef UINT32 (*p_vlynq_interrupt_get_count_t)(void *, UINT32); -+typedef INT32 (*p_vlynq_install_isr_t)(void *, UINT32, p_vlynq_intr_cntrl_isr_t, void *, void *, void *); -+typedef INT32 (*p_vlynq_uninstall_isr_t)(void *, UINT32, void *, void *, void *); -+typedef void (*p_vlynq_root_isr_t)(void *); -+typedef void (*p_vlynq_delay_t)(UINT32); -+typedef INT32 (*p_vlynq_interrupt_vector_map_t)(void *, INT32, UINT32, UINT32); -+typedef INT32 (*p_vlynq_interrupt_set_polarity_t)(void *, INT32, UINT32, INT32); -+typedef INT32 (*p_vlynq_interrupt_get_polarity_t)(void *, INT32, UINT32); -+typedef INT32 (*p_vlynq_interrupt_set_type_t)(void *, INT32, UINT32, INT32); -+typedef INT32 (*p_vlynq_interrupt_get_type_t)(void *, INT32, UINT32); -+typedef INT32 (*p_vlynq_interrupt_enable_t)(void *, INT32, UINT32); -+typedef INT32 (*p_vlynq_interrupt_disable_t)(void *, INT32, UINT32); -+ -+/*------------------------------------------------------------------------------------------*\ -+\*------------------------------------------------------------------------------------------*/ -+extern p_vlynq_interrupt_vector_set_t p_vlynq_interrupt_vector_set; -+extern p_vlynq_interrupt_vector_cntl_t p_vlynq_interrupt_vector_cntl; -+extern p_vlynq_interrupt_get_count_t p_vlynq_interrupt_get_count; -+extern p_vlynq_install_isr_t p_vlynq_install_isr; -+extern p_vlynq_uninstall_isr_t p_vlynq_uninstall_isr; -+extern p_vlynq_root_isr_t p_vlynq_root_isr; -+extern p_vlynq_delay_t p_vlynq_delay; -+extern p_vlynq_interrupt_vector_map_t p_vlynq_interrupt_vector_map; -+extern p_vlynq_interrupt_set_polarity_t p_vlynq_interrupt_set_polarity; -+extern p_vlynq_interrupt_get_polarity_t p_vlynq_interrupt_get_polarity; -+extern p_vlynq_interrupt_set_type_t p_vlynq_interrupt_set_type; -+extern p_vlynq_interrupt_get_type_t p_vlynq_interrupt_get_type; -+extern p_vlynq_interrupt_enable_t p_vlynq_interrupt_enable; -+extern p_vlynq_interrupt_disable_t p_vlynq_interrupt_disable; -+extern void *p_vlynqDevice0; -+extern void *p_vlynqDevice1; -+ -+/*------------------------------------------------------------------------------------------*\ -+\*------------------------------------------------------------------------------------------*/ -+enum _avalanche_need_ { -+ avalanche_need_vlynq, -+ avalanche_need_auto_mdix -+}; -+ -+int avalanche_need(enum _avalanche_need_); -+ -+#endif /*--- #ifndef _avalanche_types_h_ ---*/ -diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar7/if_port.h ---- linux.old/include/asm-mips/ar7/if_port.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/if_port.h 2005-11-10 01:10:46.071588750 +0100 -@@ -0,0 +1,26 @@ -+/******************************************************************************* -+ * FILE PURPOSE: Interface port id Header file -+ ******************************************************************************* -+ * FILE NAME: if_port.h -+ * -+ * DESCRIPTION: Header file carrying information about port ids of interfaces -+ * -+ * -+ * (C) Copyright 2003, Texas Instruments, Inc -+ ******************************************************************************/ -+#ifndef _IF_PORT_H_ -+#define _IF_PORT_H_ -+ -+#define AVALANCHE_CPMAC_LOW_PORT_ID 0 -+#define AVALANCHE_CPMAC_HIGH_PORT_ID 1 -+#define AVALANCHE_USB_PORT_ID 2 -+#define AVALANCHE_WLAN_PORT_ID 3 -+ -+ -+#define AVALANCHE_MARVELL_BASE_PORT_ID 4 -+ -+/* The marvell ports occupy port ids from 4 to 8 */ -+/* so the next port id number should start at 9 */ -+ -+ -+#endif /* _IF_PORT_H_ */ -diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7/sangam.h ---- linux.old/include/asm-mips/ar7/sangam.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/sangam.h 2005-11-10 01:10:46.071588750 +0100 -@@ -0,0 +1,180 @@ -+#ifndef _SANGAM_H_ -+#define _SANGAM_H_ -+ -+#include -+#include -+ -+/*---------------------------------------------------- -+ * Sangam's Module Base Addresses -+ *--------------------------------------------------*/ -+#define AVALANCHE_ADSL_SUB_SYS_MEM_BASE (KSEG1ADDR(0x01000000)) /* AVALANCHE ADSL Mem Base */ -+#define AVALANCHE_BROADBAND_INTERFACE__BASE (KSEG1ADDR(0x02000000)) /* AVALANCHE BBIF */ -+#define AVALANCHE_ATM_SAR_BASE (KSEG1ADDR(0x03000000)) /* AVALANCHE ATM SAR */ -+#define AVALANCHE_USB_SLAVE_BASE (KSEG1ADDR(0x03400000)) /* AVALANCHE USB SLAVE */ -+#define AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x04000000)) /* AVALANCHE VLYNQ 0 Mem map */ -+#define AVALANCHE_LOW_CPMAC_BASE (KSEG1ADDR(0x08610000)) /* AVALANCHE CPMAC 0 */ -+#define AVALANCHE_EMIF_CONTROL_BASE (KSEG1ADDR(0x08610800)) /* AVALANCHE EMIF */ -+#define AVALANCHE_GPIO_BASE (KSEG1ADDR(0x08610900)) /* AVALANCHE GPIO */ -+#define AVALANCHE_CLOCK_CONTROL_BASE (KSEG1ADDR(0x08610A00)) /* AVALANCHE Clock Control */ -+#define AVALANCHE_WATCHDOG_TIMER_BASE (KSEG1ADDR(0x08610B00)) /* AVALANCHE Watch Dog Timer */ -+#define AVALANCHE_TIMER0_BASE (KSEG1ADDR(0x08610C00)) /* AVALANCHE Timer 1 */ -+#define AVALANCHE_TIMER1_BASE (KSEG1ADDR(0x08610D00)) /* AVALANCHE Timer 2 */ -+#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */ -+#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 0 */ -+#define AVALANCHE_I2C_BASE (KSEG1ADDR(0x08611000)) /* AVALANCHE I2C */ -+#define AVALANCHE_USB_SLAVE_CONTROL_BASE (KSEG1ADDR(0x08611200)) /* AVALANCHE USB DMA */ -+#define AVALANCHE_MCDMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* AVALANCHE MC DMA 0 (channels 0-3) */ -+#define AVALANCHE_RESET_CONTROL_BASE (KSEG1ADDR(0x08611600)) /* AVALANCHE Reset Control */ -+#define AVALANCHE_BIST_CONTROL_BASE (KSEG1ADDR(0x08611700)) /* AVALANCHE BIST Control */ -+#define AVALANCHE_LOW_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611800)) /* AVALANCHE VLYNQ0 Control */ -+#define AVALANCHE_DEVICE_CONFIG_LATCH_BASE (KSEG1ADDR(0x08611A00)) /* AVALANCHE Device Config Latch */ -+#define AVALANCHE_HIGH_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611C00)) /* AVALANCHE VLYNQ1 Control */ -+#define AVALANCHE_MDIO_BASE (KSEG1ADDR(0x08611E00)) /* AVALANCHE MDIO */ -+#define AVALANCHE_FSER_BASE (KSEG1ADDR(0x08612000)) /* AVALANCHE FSER base */ -+#define AVALANCHE_INTC_BASE (KSEG1ADDR(0x08612400)) /* AVALANCHE INTC */ -+#define AVALANCHE_HIGH_CPMAC_BASE (KSEG1ADDR(0x08612800)) /* AVALANCHE CPMAC 1 */ -+#define AVALANCHE_HIGH_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x0C000000)) /* AVALANCHE VLYNQ 1 Mem map */ -+ -+#define AVALANCHE_SDRAM_BASE 0x14000000UL -+ -+ -+/*---------------------------------------------------- -+ * Sangam Interrupt Map (Primary Interrupts) -+ *--------------------------------------------------*/ -+ -+#define AVALANCHE_UNIFIED_SECONDARY_INT 0 -+#define AVALANCHE_EXT_INT_0 1 -+#define AVALANCHE_EXT_INT_1 2 -+/* Line# 3 to 4 are reserved */ -+#define AVALANCHE_TIMER_0_INT 5 -+#define AVALANCHE_TIMER_1_INT 6 -+#define AVALANCHE_UART0_INT 7 -+#define AVALANCHE_UART1_INT 8 -+#define AVALANCHE_DMA_INT0 9 -+#define AVALANCHE_DMA_INT1 10 -+/* Line# 11 to 14 are reserved */ -+#define AVALANCHE_ATM_SAR_INT 15 -+/* Line# 16 to 18 are reserved */ -+#define AVALANCHE_LOW_CPMAC_INT 19 -+/* Line# 20 is reserved */ -+#define AVALANCHE_LOW_VLYNQ_INT 21 -+#define AVALANCHE_CODEC_WAKEUP_INT 22 -+/* Line# 23 is reserved */ -+#define AVALANCHE_USB_SLAVE_INT 24 -+#define AVALANCHE_HIGH_VLYNQ_INT 25 -+/* Line# 26 to 27 are reserved */ -+#define AVALANCHE_UNIFIED_PHY_INT 28 -+#define AVALANCHE_I2C_INT 29 -+#define AVALANCHE_DMA_INT2 30 -+#define AVALANCHE_DMA_INT3 31 -+/* Line# 32 is reserved */ -+#define AVALANCHE_HIGH_CPMAC_INT 33 -+/* Line# 34 to 36 is reserved */ -+#define AVALANCHE_VDMA_VT_RX_INT 37 -+#define AVALANCHE_VDMA_VT_TX_INT 38 -+#define AVALANCHE_ADSL_SUB_SYSTEM_INT 39 -+ -+ -+#define AVALANCHE_EMIF_INT 47 -+ -+ -+ -+/*----------------------------------------------------------- -+ * Sangam's Reset Bits -+ *---------------------------------------------------------*/ -+ -+#define AVALANCHE_UART0_RESET_BIT 0 -+#define AVALANCHE_UART1_RESET_BIT 1 -+#define AVALANCHE_I2C_RESET_BIT 2 -+#define AVALANCHE_TIMER0_RESET_BIT 3 -+#define AVALANCHE_TIMER1_RESET_BIT 4 -+/* Reset bit 5 is reserved. */ -+#define AVALANCHE_GPIO_RESET_BIT 6 -+#define AVALANCHE_ADSL_SUB_SYS_RESET_BIT 7 -+#define AVALANCHE_USB_SLAVE_RESET_BIT 8 -+#define AVALANCHE_ATM_SAR_RESET_BIT 9 -+/* Reset bit 10 is reserved. */ -+#define AVALANCHE_VDMA_VT_RESET_BIT 11 -+#define AVALANCHE_FSER_RESET_BIT 12 -+/* Reset bit 13 to 15 are reserved */ -+#define AVALANCHE_HIGH_VLYNQ_RESET_BIT 16 -+#define AVALANCHE_LOW_CPMAC_RESET_BIT 17 -+#define AVALANCHE_MCDMA_RESET_BIT 18 -+#define AVALANCHE_BIST_RESET_BIT 19 -+#define AVALANCHE_LOW_VLYNQ_RESET_BIT 20 -+#define AVALANCHE_HIGH_CPMAC_RESET_BIT 21 -+#define AVALANCHE_MDIO_RESET_BIT 22 -+#define AVALANCHE_ADSL_SUB_SYS_DSP_RESET_BIT 23 -+/* Reset bit 24 to 25 are reserved */ -+#define AVALANCHE_LOW_EPHY_RESET_BIT 26 -+/* Reset bit 27 to 31 are reserved */ -+ -+ -+#define AVALANCHE_POWER_MODULE_USBSP 0 -+#define AVALANCHE_POWER_MODULE_WDTP 1 -+#define AVALANCHE_POWER_MODULE_UT0P 2 -+#define AVALANCHE_POWER_MODULE_UT1P 3 -+#define AVALANCHE_POWER_MODULE_IICP 4 -+#define AVALANCHE_POWER_MODULE_VDMAP 5 -+#define AVALANCHE_POWER_MODULE_GPIOP 6 -+#define AVALANCHE_POWER_MODULE_VLYNQ1P 7 -+#define AVALANCHE_POWER_MODULE_SARP 8 -+#define AVALANCHE_POWER_MODULE_ADSLP 9 -+#define AVALANCHE_POWER_MODULE_EMIFP 10 -+#define AVALANCHE_POWER_MODULE_ADSPP 12 -+#define AVALANCHE_POWER_MODULE_RAMP 13 -+#define AVALANCHE_POWER_MODULE_ROMP 14 -+#define AVALANCHE_POWER_MODULE_DMAP 15 -+#define AVALANCHE_POWER_MODULE_BISTP 16 -+#define AVALANCHE_POWER_MODULE_TIMER0P 18 -+#define AVALANCHE_POWER_MODULE_TIMER1P 19 -+#define AVALANCHE_POWER_MODULE_EMAC0P 20 -+#define AVALANCHE_POWER_MODULE_EMAC1P 22 -+#define AVALANCHE_POWER_MODULE_EPHYP 24 -+#define AVALANCHE_POWER_MODULE_VLYNQ0P 27 -+ -+ -+ -+ -+ -+/* -+ * Sangam board vectors -+ */ -+ -+#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE)) -+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE)) -+ -+/*----------------------------------------------------------------------------- -+ * Sangam's system register. -+ * -+ *---------------------------------------------------------------------------*/ -+#define AVALANCHE_DCL_BOOTCR (KSEG1ADDR(0x08611A00)) -+#define AVALANCHE_EMIF_SDRAM_CFG (AVALANCHE_EMIF_CONTROL_BASE + 0x8) -+#define AVALANCHE_RST_CTRL_PRCR (KSEG1ADDR(0x08611600)) -+#define AVALANCHE_RST_CTRL_SWRCR (KSEG1ADDR(0x08611604)) -+#define AVALANCHE_RST_CTRL_RSR (KSEG1ADDR(0x08611600)) -+ -+#define AVALANCHE_POWER_CTRL_PDCR (KSEG1ADDR(0x08610A00)) -+#define AVALANCHE_WAKEUP_CTRL_WKCR (KSEG1ADDR(0x08610A0C)) -+ -+#define AVALANCHE_GPIO_DATA_IN (AVALANCHE_GPIO_BASE + 0x0) -+#define AVALANCHE_GPIO_DATA_OUT (AVALANCHE_GPIO_BASE + 0x4) -+#define AVALANCHE_GPIO_DIR (AVALANCHE_GPIO_BASE + 0x8) -+#define AVALANCHE_GPIO_ENBL (AVALANCHE_GPIO_BASE + 0xC) -+#define AVALANCHE_CVR (AVALANCHE_GPIO_BASE + 0x14) -+ -+/* -+ * Yamon Prom print address. -+ */ -+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500)) -+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */ -+#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34) -+ -+#define AVALANCHE_BASE_BAUD ( 3686400 / 16 ) -+ -+#define AVALANCHE_GPIO_PIN_COUNT 32 -+#define AVALANCHE_GPIO_OFF_MAP {0xF34FFFC0} -+ -+#include "sangam_boards.h" -+ -+#endif /*_SANGAM_H_ */ -diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h ---- linux.old/include/asm-mips/ar7/sangam_boards.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/sangam_boards.h 2005-11-10 01:10:46.071588750 +0100 -@@ -0,0 +1,77 @@ -+#ifndef _SANGAM_BOARDS_H -+#define _SANGAM_BOARDS_H -+ -+// Let us define board specific information here. -+ -+ -+#if defined(CONFIG_AR7DB) -+ -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+ -+#endif -+ -+ -+#if defined(CONFIG_AR7RD) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined(CONFIG_AR7WI) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined(CONFIG_AR7V) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined(CONFIG_AR7WRD) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined(CONFIG_AR7VWI) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined CONFIG_SEAD2 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0xAAAAAAAA -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0 -+#include -+#endif -+ -+ -+#endif -diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ar7/tnetd73xx.h ---- linux.old/include/asm-mips/ar7/tnetd73xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/tnetd73xx.h 2005-11-10 01:10:46.075589000 +0100 -@@ -0,0 +1,338 @@ -+/****************************************************************************** -+ * FILE PURPOSE: TNETD73xx Common Header File -+ ****************************************************************************** -+ * FILE NAME: tnetd73xx.h -+ * -+ * DESCRIPTION: shared typedef's, constants and API for TNETD73xx -+ * -+ * REVISION HISTORY: -+ * 27 Nov 02 - PSP TII -+ * -+ * (C) Copyright 2002, Texas Instruments, Inc -+ *******************************************************************************/ -+ -+/* -+ * -+ * -+ * These are const, typedef, and api definitions for tnetd73xx. -+ * -+ * NOTES: -+ * 1. This file may be included into both C and Assembly files. -+ * - for .s files, please do #define _ASMLANGUAGE in your ASM file to -+ * avoid C data types (typedefs) below; -+ * - for .c files, you don't have to do anything special. -+ * -+ * 2. This file has a number of sections for each SOC subsystem. When adding -+ * a new constant, find the subsystem you are working on and follow the -+ * name pattern. If you are adding another typedef for your interface, please, -+ * place it with other typedefs and function prototypes. -+ * -+ * 3. Please, DO NOT add any macros or types that are local to a subsystem to avoid -+ * cluttering. Include such items directly into the module's .c file or have a -+ * local .h file to pass data between smaller modules. This file defines only -+ * shared items. -+ */ -+ -+#ifndef __TNETD73XX_H__ -+#define __TNETD73XX_H__ -+ -+#ifndef _ASMLANGUAGE /* This part not for assembly language */ -+ -+extern unsigned int tnetd73xx_mips_freq; -+extern unsigned int tnetd73xx_vbus_freq; -+ -+#include "tnetd73xx_err.h" -+ -+#endif /* _ASMLANGUAGE */ -+ -+ -+/******************************************************************************************* -+* Emerald core specific -+******************************************************************************************** */ -+ -+#ifdef BIG_ENDIAN -+#elif defined(LITTLE_ENDIAN) -+#else -+#error Need to define endianism -+#endif -+ -+#ifndef KSEG_MSK -+#define KSEG_MSK 0xE0000000 /* Most significant 3 bits denote kseg choice */ -+#endif -+ -+#ifndef KSEG_INV_MASK -+#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */ -+#endif -+ -+#ifndef KSEG0_BASE -+#define KSEG0_BASE 0x80000000 -+#endif -+ -+#ifndef KSEG1_BASE -+#define KSEG1_BASE 0xA0000000 -+#endif -+ -+#ifndef KSEG0 -+#define KSEG0(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG0_BASE) -+#endif -+ -+#ifndef KSEG1 -+#define KSEG1(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG1_BASE) -+#endif -+ -+#ifndef KUSEG -+#define KUSEG(addr) ((__u32)(addr) & ~KSEG_MSK) -+#endif -+ -+#ifndef PHYS_ADDR -+#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK) -+#endif -+ -+#ifndef PHYS_TO_K0 -+#define PHYS_TO_K0(addr) (PHYS_ADDR(addr)|KSEG0_BASE) -+#endif -+ -+#ifndef PHYS_TO_K1 -+#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE) -+#endif -+ -+#ifndef REG8_ADDR -+#define REG8_ADDR(addr) (volatile __u8 *)(PHYS_TO_K1(addr)) -+#define REG8_DATA(addr) (*(volatile __u8 *)(PHYS_TO_K1(addr))) -+#define REG8_WRITE(addr, data) REG8_DATA(addr) = data; -+#define REG8_READ(addr, data) data = (__u8) REG8_DATA(addr); -+#endif -+ -+#ifndef REG16_ADDR -+#define REG16_ADDR(addr) (volatile __u16 *)(PHYS_TO_K1(addr)) -+#define REG16_DATA(addr) (*(volatile __u16 *)(PHYS_TO_K1(addr))) -+#define REG16_WRITE(addr, data) REG16_DATA(addr) = data; -+#define REG16_READ(addr, data) data = (__u16) REG16_DATA(addr); -+#endif -+ -+#ifndef REG32_ADDR -+#define REG32_ADDR(addr) (volatile __u32 *)(PHYS_TO_K1(addr)) -+#define REG32_DATA(addr) (*(volatile __u32 *)(PHYS_TO_K1(addr))) -+#define REG32_WRITE(addr, data) REG32_DATA(addr) = data; -+#define REG32_READ(addr, data) data = (__u32) REG32_DATA(addr); -+#endif -+ -+#ifdef _LINK_KSEG0_ /* Application is linked into KSEG0 space */ -+#define VIRT_ADDR(addr) PHYS_TO_K0(PHYS_ADDR(addr)) -+#endif -+ -+#ifdef _LINK_KSEG1_ /* Application is linked into KSEG1 space */ -+#define VIRT_ADDR(addr) PHYS_TO_K1(PHYS_ADDR(addr)) -+#endif -+ -+#if !defined(_LINK_KSEG0_) && !defined(_LINK_KSEG1_) -+#error You must define _LINK_KSEG0_ or _LINK_KSEG1_ to compile the code. -+#endif -+ -+/* TNETD73XX chip definations */ -+ -+#define FREQ_1MHZ 1000000 -+#define TNETD73XX_MIPS_FREQ tnetd73xx_mips_freq /* CPU clock frequency */ -+#define TNETD73XX_VBUS_FREQ tnetd73xx_vbus_freq /* originally (TNETD73XX_MIPS_FREQ/2) */ -+ -+#ifdef AR7SEAD2 -+#define TNETD73XX_MIPS_FREQ_DEFAULT 25000000 /* 25 Mhz for sead2 board crystal */ -+#else -+#define TNETD73XX_MIPS_FREQ_DEFAULT 125000000 /* 125 Mhz */ -+#endif -+#define TNETD73XX_VBUS_FREQ_DEFAULT (TNETD73XX_MIPS_FREQ_DEFAULT / 2) /* Sync mode */ -+ -+ -+ -+/* Module base addresses */ -+#define TNETD73XX_ADSLSS_BASE PHYS_TO_K1(0x01000000) /* ADSLSS Module */ -+#define TNETD73XX_BBIF_CTRL_BASE PHYS_TO_K1(0x02000000) /* BBIF Control */ -+#define TNETD73XX_ATMSAR_BASE PHYS_TO_K1(0x03000000) /* ATM SAR */ -+#define TNETD73XX_USB_BASE PHYS_TO_K1(0x03400000) /* USB Module */ -+#define TNETD73XX_VLYNQ0_BASE PHYS_TO_K1(0x04000000) /* VLYNQ0 Module */ -+#define TNETD73xx_EMAC0_BASE PHYS_TO_K1(0x08610000) /* EMAC0 Module*/ -+#define TNETD73XX_EMIF_BASE PHYS_TO_K1(0x08610800) /* EMIF Module */ -+#define TNETD73XX_GPIO_BASE PHYS_TO_K1(0x08610900) /* GPIO control */ -+#define TNETD73XX_CLOCK_CTRL_BASE PHYS_TO_K1(0x08610A00) /* Clock Control */ -+#define TNETD73XX_WDTIMER_BASE PHYS_TO_K1(0x08610B00) /* WDTIMER Module */ -+#define TNETD73XX_TIMER0_BASE PHYS_TO_K1(0x08610C00) /* TIMER0 Module */ -+#define TNETD73XX_TIMER1_BASE PHYS_TO_K1(0x08610D00) /* TIMER1 Module */ -+#define TNETD73XX_UARTA_BASE PHYS_TO_K1(0x08610E00) /* UART A */ -+#define TNETD73XX_UARTB_BASE PHYS_TO_K1(0x08610F00) /* UART B */ -+#define TNETD73XX_I2C_BASE PHYS_TO_K1(0x08611000) /* I2C Module */ -+#define TNETD73XX_USB_DMA_BASE PHYS_TO_K1(0x08611200) /* USB Module */ -+#define TNETD73XX_MCDMA_BASE PHYS_TO_K1(0x08611400) /* MC-DMA */ -+#define TNETD73xx_VDMAVT_BASE PHYS_TO_K1(0x08611500) /* VDMAVT Control */ -+#define TNETD73XX_RST_CTRL_BASE PHYS_TO_K1(0x08611600) /* Reset Control */ -+#define TNETD73xx_BIST_CTRL_BASE PHYS_TO_K1(0x08611700) /* BIST Control */ -+#define TNETD73xx_VLYNQ0_CTRL_BASE PHYS_TO_K1(0x08611800) /* VLYNQ0 Control */ -+#define TNETD73XX_DCL_BASE PHYS_TO_K1(0x08611A00) /* Device Configuration Latch */ -+#define TNETD73xx_VLYNQ1_CTRL_BASE PHYS_TO_K1(0x08611C00) /* VLYNQ1 Control */ -+#define TNETD73xx_MDIO_BASE PHYS_TO_K1(0x08611E00) /* MDIO Control */ -+#define TNETD73XX_FSER_BASE PHYS_TO_K1(0x08612000) /* FSER Control */ -+#define TNETD73XX_INTC_BASE PHYS_TO_K1(0x08612400) /* Interrupt Controller */ -+#define TNETD73xx_EMAC1_BASE PHYS_TO_K1(0x08612800) /* EMAC1 Module*/ -+#define TNETD73XX_VLYNQ1_BASE PHYS_TO_K1(0x0C000000) /* VLYNQ1 Module */ -+ -+/* BBIF Registers */ -+#define TNETD73XX_BBIF_ADSLADR (TNETD73XX_BBIF_CTRL_BASE + 0x0) -+ -+/* Device Configuration Latch Registers */ -+#define TNETD73XX_DCL_BOOTCR (TNETD73XX_DCL_BASE + 0x0) -+#define TNETD73XX_DCL_DPLLSELR (TNETD73XX_DCL_BASE + 0x10) -+#define TNETD73XX_DCL_SPEEDCTLR (TNETD73XX_DCL_BASE + 0x14) -+#define TNETD73XX_DCL_SPEEDPWDR (TNETD73XX_DCL_BASE + 0x18) -+#define TNETD73XX_DCL_SPEEDCAPR (TNETD73XX_DCL_BASE + 0x1C) -+ -+/* GPIO Control */ -+#define TNETD73XX_GPIODINR (TNETD73XX_GPIO_BASE + 0x0) -+#define TNETD73XX_GPIODOUTR (TNETD73XX_GPIO_BASE + 0x4) -+#define TNETD73XX_GPIOPDIRR (TNETD73XX_GPIO_BASE + 0x8) -+#define TNETD73XX_GPIOENR (TNETD73XX_GPIO_BASE + 0xC) -+#define TNETD73XX_CVR (TNETD73XX_GPIO_BASE + 0x14) -+#define TNETD73XX_DIDR1 (TNETD73XX_GPIO_BASE + 0x18) -+#define TNETD73XX_DIDR2 (TNETD73XX_GPIO_BASE + 0x1C) -+ -+/* Reset Control */ -+#define TNETD73XX_RST_CTRL_PRCR (TNETD73XX_RST_CTRL_BASE + 0x0) -+#define TNETD73XX_RST_CTRL_SWRCR (TNETD73XX_RST_CTRL_BASE + 0x4) -+#define TNETD73XX_RST_CTRL_RSR (TNETD73XX_RST_CTRL_BASE + 0x8) -+ -+/* Power Control */ -+#define TNETD73XX_POWER_CTRL_PDCR (TNETD73XX_CLOCK_CTRL_BASE + 0x0) -+#define TNETD73XX_POWER_CTRL_PCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x4) -+#define TNETD73XX_POWER_CTRL_PDUCR (TNETD73XX_CLOCK_CTRL_BASE + 0x8) -+#define TNETD73XX_POWER_CTRL_WKCR (TNETD73XX_CLOCK_CTRL_BASE + 0xC) -+ -+/* Clock Control */ -+#define TNETD73XX_CLK_CTRL_SCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x20) -+#define TNETD73XX_CLK_CTRL_SCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x30) -+#define TNETD73XX_CLK_CTRL_MCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x40) -+#define TNETD73XX_CLK_CTRL_MCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x50) -+#define TNETD73XX_CLK_CTRL_UCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x60) -+#define TNETD73XX_CLK_CTRL_UCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x70) -+#define TNETD73XX_CLK_CTRL_ACLKCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x80) -+#define TNETD73XX_CLK_CTRL_ACLKPLLCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x90) -+#define TNETD73XX_CLK_CTRL_ACLKCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xA0) -+#define TNETD73XX_CLK_CTRL_ACLKPLLCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xB0) -+ -+/* EMIF control */ -+#define TNETD73XX_EMIF_SDRAM_CFG ( TNETD73XX_EMIF_BASE + 0x08 ) -+ -+/* UART */ -+#ifdef AR7SEAD2 -+#define TNETD73XX_UART_FREQ 3686400 -+#else -+#define TNETD73XX_UART_FREQ TNETD73XX_VBUS_FREQ -+#endif -+ -+/* Interrupt Controller */ -+ -+/* Primary interrupts */ -+#define TNETD73XX_INTC_UNIFIED_SECONDARY 0 /* Unified secondary interrupt */ -+#define TNETD73XX_INTC_EXTERNAL0 1 /* External Interrupt Line 0 */ -+#define TNETD73XX_INTC_EXTERNAL1 2 /* External Interrupt Line 1 */ -+#define TNETD73XX_INTC_RESERVED3 3 /* Reserved */ -+#define TNETD73XX_INTC_RESERVED4 4 /* Reserved */ -+#define TNETD73XX_INTC_TIMER0 5 /* TIMER 0 int */ -+#define TNETD73XX_INTC_TIMER1 6 /* TIMER 1 int */ -+#define TNETD73XX_INTC_UART0 7 /* UART 0 int */ -+#define TNETD73XX_INTC_UART1 8 /* UART 1 int */ -+#define TNETD73XX_INTC_MCDMA0 9 /* MCDMA 0 int */ -+#define TNETD73XX_INTC_MCDMA1 10 /* MCDMA 1 int */ -+#define TNETD73XX_INTC_RESERVED11 11 /* Reserved */ -+#define TNETD73XX_INTC_RESERVED12 12 /* Reserved */ -+#define TNETD73XX_INTC_RESERVED13 13 /* Reserved */ -+#define TNETD73XX_INTC_RESERVED14 14 /* Reserved */ -+#define TNETD73XX_INTC_ATMSAR 15 /* ATM SAR int */ -+#define TNETD73XX_INTC_RESERVED16 16 /* Reserved */ -+#define TNETD73XX_INTC_RESERVED17 17 /* Reserved */ -+#define TNETD73XX_INTC_RESERVED18 18 /* Reserved */ -+#define TNETD73XX_INTC_EMAC0 19 /* EMAC 0 int */ -+#define TNETD73XX_INTC_RESERVED20 20 /* Reserved */ -+#define TNETD73XX_INTC_VLYNQ0 21 /* VLYNQ 0 int */ -+#define TNETD73XX_INTC_CODEC 22 /* CODEC int */ -+#define TNETD73XX_INTC_RESERVED23 23 /* Reserved */ -+#define TNETD73XX_INTC_USBSLAVE 24 /* USB Slave int */ -+#define TNETD73XX_INTC_VLYNQ1 25 /* VLYNQ 1 int */ -+#define TNETD73XX_INTC_RESERVED26 26 /* Reserved */ -+#define TNETD73XX_INTC_RESERVED27 27 /* Reserved */ -+#define TNETD73XX_INTC_ETH_PHY 28 /* Ethernet PHY */ -+#define TNETD73XX_INTC_I2C 29 /* I2C int */ -+#define TNETD73XX_INTC_MCDMA2 30 /* MCDMA 2 int */ -+#define TNETD73XX_INTC_MCDMA3 31 /* MCDMA 3 int */ -+#define TNETD73XX_INTC_RESERVED32 32 /* Reserved */ -+#define TNETD73XX_INTC_EMAC1 33 /* EMAC 1 int */ -+#define TNETD73XX_INTC_RESERVED34 34 /* Reserved */ -+#define TNETD73XX_INTC_RESERVED35 35 /* Reserved */ -+#define TNETD73XX_INTC_RESERVED36 36 /* Reserved */ -+#define TNETD73XX_INTC_VDMAVTRX 37 /* VDMAVTRX */ -+#define TNETD73XX_INTC_VDMAVTTX 38 /* VDMAVTTX */ -+#define TNETD73XX_INTC_ADSLSS 39 /* ADSLSS */ -+ -+/* Secondary interrupts */ -+#define TNETD73XX_INTC_SEC0 40 /* Secondary */ -+#define TNETD73XX_INTC_SEC1 41 /* Secondary */ -+#define TNETD73XX_INTC_SEC2 42 /* Secondary */ -+#define TNETD73XX_INTC_SEC3 43 /* Secondary */ -+#define TNETD73XX_INTC_SEC4 44 /* Secondary */ -+#define TNETD73XX_INTC_SEC5 45 /* Secondary */ -+#define TNETD73XX_INTC_SEC6 46 /* Secondary */ -+#define TNETD73XX_INTC_EMIF 47 /* EMIF */ -+#define TNETD73XX_INTC_SEC8 48 /* Secondary */ -+#define TNETD73XX_INTC_SEC9 49 /* Secondary */ -+#define TNETD73XX_INTC_SEC10 50 /* Secondary */ -+#define TNETD73XX_INTC_SEC11 51 /* Secondary */ -+#define TNETD73XX_INTC_SEC12 52 /* Secondary */ -+#define TNETD73XX_INTC_SEC13 53 /* Secondary */ -+#define TNETD73XX_INTC_SEC14 54 /* Secondary */ -+#define TNETD73XX_INTC_SEC15 55 /* Secondary */ -+#define TNETD73XX_INTC_SEC16 56 /* Secondary */ -+#define TNETD73XX_INTC_SEC17 57 /* Secondary */ -+#define TNETD73XX_INTC_SEC18 58 /* Secondary */ -+#define TNETD73XX_INTC_SEC19 59 /* Secondary */ -+#define TNETD73XX_INTC_SEC20 60 /* Secondary */ -+#define TNETD73XX_INTC_SEC21 61 /* Secondary */ -+#define TNETD73XX_INTC_SEC22 62 /* Secondary */ -+#define TNETD73XX_INTC_SEC23 63 /* Secondary */ -+#define TNETD73XX_INTC_SEC24 64 /* Secondary */ -+#define TNETD73XX_INTC_SEC25 65 /* Secondary */ -+#define TNETD73XX_INTC_SEC26 66 /* Secondary */ -+#define TNETD73XX_INTC_SEC27 67 /* Secondary */ -+#define TNETD73XX_INTC_SEC28 68 /* Secondary */ -+#define TNETD73XX_INTC_SEC29 69 /* Secondary */ -+#define TNETD73XX_INTC_SEC30 70 /* Secondary */ -+#define TNETD73XX_INTC_SEC31 71 /* Secondary */ -+ -+/* These ugly macros are to access the -1 registers, like config1 */ -+#define MFC0_SEL1_OPCODE(dst, src)\ -+ .word (0x40000000 | ((dst)<<16) | ((src)<<11) | 1);\ -+ nop; \ -+ nop; \ -+ nop -+ -+#define MTC0_SEL1_OPCODE(dst, src)\ -+ .word (0x40800000 | ((dst)<<16) | ((src)<<11) | 1);\ -+ nop; \ -+ nop; \ -+ nop -+ -+ -+/* Below are Jade core specific */ -+#define CFG0_4K_IL_MASK 0x00380000 -+#define CFG0_4K_IL_SHIFT 19 -+#define CFG0_4K_IA_MASK 0x00070000 -+#define CFG0_4K_IA_SHIFT 16 -+#define CFG0_4K_IS_MASK 0x01c00000 -+#define CFG0_4K_IS_SHIFT 22 -+ -+#define CFG0_4K_DL_MASK 0x00001c00 -+#define CFG0_4K_DL_SHIFT 10 -+#define CFG0_4K_DA_MASK 0x00000380 -+#define CFG0_4K_DA_SHIFT 7 -+#define CFG0_4K_DS_MASK 0x0000E000 -+#define CFG0_4K_DS_SHIFT 13 -+ -+ -+ -+#endif /* __TNETD73XX_H_ */ -diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h ---- linux.old/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-11-10 01:10:46.075589000 +0100 -@@ -0,0 +1,42 @@ -+/****************************************************************************** -+ * FILE PURPOSE: TNETD73xx Error Definations Header File -+ ****************************************************************************** -+ * FILE NAME: tnetd73xx_err.h -+ * -+ * DESCRIPTION: Error definations for TNETD73XX -+ * -+ * REVISION HISTORY: -+ * 27 Nov 02 - PSP TII -+ * -+ * (C) Copyright 2002, Texas Instruments, Inc -+ *******************************************************************************/ -+ -+ -+#ifndef __TNETD73XX_ERR_H__ -+#define __TNETD73XX_ERR_H__ -+ -+typedef enum TNETD73XX_ERR_t -+{ -+ TNETD73XX_ERR_OK = 0, /* OK or SUCCESS */ -+ TNETD73XX_ERR_ERROR = -1, /* Unspecified/Generic ERROR */ -+ -+ /* Pointers and args */ -+ TNETD73XX_ERR_INVARG = -2, /* Invaild argument to the call */ -+ TNETD73XX_ERR_NULLPTR = -3, /* NULL pointer */ -+ TNETD73XX_ERR_BADPTR = -4, /* Bad (out of mem) pointer */ -+ -+ /* Memory issues */ -+ TNETD73XX_ERR_ALLOC_FAIL = -10, /* allocation failed */ -+ TNETD73XX_ERR_FREE_FAIL = -11, /* free failed */ -+ TNETD73XX_ERR_MEM_CORRUPT = -12, /* corrupted memory */ -+ TNETD73XX_ERR_BUF_LINK = -13, /* buffer linking failed */ -+ -+ /* Device issues */ -+ TNETD73XX_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */ -+ TNETD73XX_ERR_DEVICE_MALFUNC = -21, /* device malfunction */ -+ -+ TNETD73XX_ERR_INVID = -30 /* Invalid ID */ -+ -+} TNETD73XX_ERR; -+ -+#endif /* __TNETD73XX_ERR_H__ */ -diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h ---- linux.old/include/asm-mips/ar7/tnetd73xx_misc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-11-10 01:10:46.075589000 +0100 -@@ -0,0 +1,239 @@ -+/****************************************************************************** -+ * FILE PURPOSE: TNETD73xx Misc modules API Header -+ ****************************************************************************** -+ * FILE NAME: tnetd73xx_misc.h -+ * -+ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO -+ * FSER Modules API -+ * As per TNETD73xx specifications -+ * -+ * REVISION HISTORY: -+ * 27 Nov 02 - Sharath Kumar PSP TII -+ * 14 Feb 03 - Anant Gole PSP TII -+ * -+ * (C) Copyright 2002, Texas Instruments, Inc -+ *******************************************************************************/ -+ -+#ifndef __TNETD73XX_MISC_H__ -+#define __TNETD73XX_MISC_H__ -+ -+/***************************************************************************** -+ * Reset Control Module -+ *****************************************************************************/ -+ -+typedef enum TNETD73XX_RESET_MODULE_tag -+{ -+ RESET_MODULE_UART0 = 0, -+ RESET_MODULE_UART1 = 1, -+ RESET_MODULE_I2C = 2, -+ RESET_MODULE_TIMER0 = 3, -+ RESET_MODULE_TIMER1 = 4, -+ RESET_MODULE_GPIO = 6, -+ RESET_MODULE_ADSLSS = 7, -+ RESET_MODULE_USBS = 8, -+ RESET_MODULE_SAR = 9, -+ RESET_MODULE_VDMA_VT = 11, -+ RESET_MODULE_FSER = 12, -+ RESET_MODULE_VLYNQ1 = 16, -+ RESET_MODULE_EMAC0 = 17, -+ RESET_MODULE_DMA = 18, -+ RESET_MODULE_BIST = 19, -+ RESET_MODULE_VLYNQ0 = 20, -+ RESET_MODULE_EMAC1 = 21, -+ RESET_MODULE_MDIO = 22, -+ RESET_MODULE_ADSLSS_DSP = 23, -+ RESET_MODULE_EPHY = 26 -+} TNETD73XX_RESET_MODULE_T; -+ -+typedef enum TNETD73XX_RESET_CTRL_tag -+{ -+ IN_RESET = 0, -+ OUT_OF_RESET -+} TNETD73XX_RESET_CTRL_T; -+ -+typedef enum TNETD73XX_SYS_RST_MODE_tag -+{ -+ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */ -+ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */ -+} TNETD73XX_SYS_RST_MODE_T; -+ -+typedef enum TNETD73XX_SYS_RESET_STATUS_tag -+{ -+ HARDWARE_RESET = 0, -+ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */ -+ WATCHDOG_RESET, -+ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */ -+} TNETD73XX_SYS_RESET_STATUS_T; -+ -+void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, -+ TNETD73XX_RESET_CTRL_T reset_ctrl); -+TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status(TNETD73XX_RESET_MODULE_T reset_module); -+void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode); -+TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status(void); -+ -+/***************************************************************************** -+ * Power Control Module -+ *****************************************************************************/ -+ -+typedef enum TNETD73XX_POWER_MODULE_tag -+{ -+ POWER_MODULE_USBSP = 0, -+ POWER_MODULE_WDTP = 1, -+ POWER_MODULE_UT0P = 2, -+ POWER_MODULE_UT1P = 3, -+ POWER_MODULE_IICP = 4, -+ POWER_MODULE_VDMAP = 5, -+ POWER_MODULE_GPIOP = 6, -+ POWER_MODULE_VLYNQ1P = 7, -+ POWER_MODULE_SARP = 8, -+ POWER_MODULE_ADSLP = 9, -+ POWER_MODULE_EMIFP = 10, -+ POWER_MODULE_ADSPP = 12, -+ POWER_MODULE_RAMP = 13, -+ POWER_MODULE_ROMP = 14, -+ POWER_MODULE_DMAP = 15, -+ POWER_MODULE_BISTP = 16, -+ POWER_MODULE_TIMER0P = 18, -+ POWER_MODULE_TIMER1P = 19, -+ POWER_MODULE_EMAC0P = 20, -+ POWER_MODULE_EMAC1P = 22, -+ POWER_MODULE_EPHYP = 24, -+ POWER_MODULE_VLYNQ0P = 27, -+} TNETD73XX_POWER_MODULE_T; -+ -+typedef enum TNETD73XX_POWER_CTRL_tag -+{ -+ POWER_CTRL_POWER_UP = 0, -+ POWER_CTRL_POWER_DOWN -+} TNETD73XX_POWER_CTRL_T; -+ -+typedef enum TNETD73XX_SYS_POWER_MODE_tag -+{ -+ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */ -+ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */ -+ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */ -+ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */ -+} TNETD73XX_SYS_POWER_MODE_T; -+ -+void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl); -+TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module); -+void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode); -+TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode(void); -+ -+/***************************************************************************** -+ * Wakeup Control -+ *****************************************************************************/ -+ -+typedef enum TNETD73XX_WAKEUP_INTERRUPT_tag -+{ -+ WAKEUP_INT0 = 1, -+ WAKEUP_INT1 = 2, -+ WAKEUP_INT2 = 4, -+ WAKEUP_INT3 = 8 -+} TNETD73XX_WAKEUP_INTERRUPT_T; -+ -+typedef enum TNETD73XX_WAKEUP_CTRL_tag -+{ -+ WAKEUP_DISABLED = 0, -+ WAKEUP_ENABLED -+} TNETD73XX_WAKEUP_CTRL_T; -+ -+typedef enum TNETD73XX_WAKEUP_POLARITY_tag -+{ -+ WAKEUP_ACTIVE_HIGH = 0, -+ WAKEUP_ACTIVE_LOW -+} TNETD73XX_WAKEUP_POLARITY_T; -+ -+void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int, -+ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl, -+ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity); -+ -+/***************************************************************************** -+ * FSER Control -+ *****************************************************************************/ -+ -+typedef enum TNETD73XX_FSER_MODE_tag -+{ -+ FSER_I2C = 0, -+ FSER_UART = 1 -+} TNETD73XX_FSER_MODE_T; -+ -+void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode); -+ -+/***************************************************************************** -+ * Clock Control -+ *****************************************************************************/ -+ -+#define CLK_MHZ(x) ( (x) * 1000000 ) -+ -+typedef enum TNETD73XX_CLKC_ID_tag -+{ -+ CLKC_SYS = 0, -+ CLKC_MIPS, -+ CLKC_USB, -+ CLKC_ADSLSS -+} TNETD73XX_CLKC_ID_T; -+ -+void tnetd73xx_clkc_init(__u32 afeclk, __u32 refclk, __u32 xtal3in); -+TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, __u32 output_freq); -+__u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id); -+ -+/***************************************************************************** -+ * GPIO Control -+ *****************************************************************************/ -+ -+typedef enum TNETD73XX_GPIO_PIN_tag -+{ -+ GPIO_UART0_RD = 0, -+ GPIO_UART0_TD = 1, -+ GPIO_UART0_RTS = 2, -+ GPIO_UART0_CTS = 3, -+ GPIO_FSER_CLK = 4, -+ GPIO_FSER_D = 5, -+ GPIO_EXT_AFE_SCLK = 6, -+ GPIO_EXT_AFE_TX_FS = 7, -+ GPIO_EXT_AFE_TXD = 8, -+ GPIO_EXT_AFE_RS_FS = 9, -+ GPIO_EXT_AFE_RXD1 = 10, -+ GPIO_EXT_AFE_RXD0 = 11, -+ GPIO_EXT_AFE_CDIN = 12, -+ GPIO_EXT_AFE_CDOUT = 13, -+ GPIO_EPHY_SPEED100 = 14, -+ GPIO_EPHY_LINKON = 15, -+ GPIO_EPHY_ACTIVITY = 16, -+ GPIO_EPHY_FDUPLEX = 17, -+ GPIO_EINT0 = 18, -+ GPIO_EINT1 = 19, -+ GPIO_MBSP0_TCLK = 20, -+ GPIO_MBSP0_RCLK = 21, -+ GPIO_MBSP0_RD = 22, -+ GPIO_MBSP0_TD = 23, -+ GPIO_MBSP0_RFS = 24, -+ GPIO_MBSP0_TFS = 25, -+ GPIO_MII_DIO = 26, -+ GPIO_MII_DCLK = 27, -+} TNETD73XX_GPIO_PIN_T; -+ -+typedef enum TNETD73XX_GPIO_PIN_MODE_tag -+{ -+ FUNCTIONAL_PIN = 0, -+ GPIO_PIN = 1 -+} TNETD73XX_GPIO_PIN_MODE_T; -+ -+typedef enum TNETD73XX_GPIO_PIN_DIRECTION_tag -+{ -+ GPIO_OUTPUT_PIN = 0, -+ GPIO_INPUT_PIN = 1 -+} TNETD73XX_GPIO_PIN_DIRECTION_T; -+ -+void tnetd73xx_gpio_init(void); -+void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin, -+ TNETD73XX_GPIO_PIN_MODE_T pin_mode, -+ TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction); -+void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value); -+int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin); -+ -+/* TNETD73XX Revision */ -+__u32 tnetd73xx_get_revision(void); -+ -+#endif /* __TNETD73XX_MISC_H__ */ -diff -urN linux.old/include/asm-mips/ar7/vlynq.h linux.dev/include/asm-mips/ar7/vlynq.h ---- linux.old/include/asm-mips/ar7/vlynq.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/vlynq.h 2005-11-10 01:10:46.095590250 +0100 -@@ -0,0 +1,610 @@ -+/*************************************************************************** -+**+----------------------------------------------------------------------+** -+**| **** |** -+**| **** |** -+**| ******o*** |** -+**| ********_///_**** |** -+**| ***** /_//_/ **** |** -+**| ** ** (__/ **** |** -+**| ********* |** -+**| **** |** -+**| *** |** -+**| |** -+**| Copyright (c) 2003 Texas Instruments Incorporated |** -+**| ALL RIGHTS RESERVED |** -+**| |** -+**| Permission is hereby granted to licensees of Texas Instruments |** -+**| Incorporated (TI) products to use this computer program for the sole |** -+**| purpose of implementing a licensee product based on TI products. |** -+**| No other rights to reproduce, use, or disseminate this computer |** -+**| program, whether in part or in whole, are granted. |** -+**| |** -+**| TI makes no representation or warranties with respect to the |** -+**| performance of this computer program, and specifically disclaims |** -+**| any responsibility for any damages, special or consequential, |** -+**| connected with the use of this program. |** -+**| |** -+**+----------------------------------------------------------------------+** -+***************************************************************************/ -+ -+/********************************************************************************* -+ * ------------------------------------------------------------------------------ -+ * Module : vlynq_hal.h -+ * Description : -+ * This header file provides the set of functions exported by the -+ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper. -+ * ------------------------------------------------------------------------------ -+ *********************************************************************************/ -+ -+#ifndef _VLYNQ_HAL_H_ -+#define _VLYNQ_HAL_H_ -+ -+/* Enable/Disable debug feature */ -+#undef VLYNQ_DEBUG -+ -+#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */ -+#define debugPrint(format,args...) -+#else -+#define debugPrint(format,args...) -+#endif -+ -+ /* number of VLYNQ memory regions supported */ -+#define VLYNQ_MAX_MEMORY_REGIONS 0x04 -+ -+ /* Max.number of external interrupt inputs supported by VLYNQ module */ -+#define VLYNQ_IVR_MAXIVR 0x08 -+ -+#define VLYNQ_CLK_DIV_MAX 0x08 -+#define VLYNQ_CLK_DIV_MIN 0x01 -+ -+ -+/*** the total number of entries allocated for ICB would be -+ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/ -+#define VLYNQ_IVR_CHAIN_SLOTS 10 -+ -+ -+/* Error defines */ -+#define VLYNQ_SUCCESS 0 -+ -+#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */ -+#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1) -+#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2) -+#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3) -+#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4) -+#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5) -+#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6) -+#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7) -+ -+/* Vlynq Defines and Macros */ -+ -+#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */ -+ -+/* Base address of module */ -+#define VLYNQ_BASE (pdev->module_base) -+ -+#define VLYNQ_REMOTE_REGS_OFFSET 0x0080 -+ -+#define VLYNQ_REV_OFFSET 0x0000 -+#define VLYNQ_CTRL_OFFSET 0x0004 -+#define VLYNQ_STATUS_OFFSET 0x0008 -+#define VLYNQ_INT_STAT_OFFSET 0x0010 -+#define VLYNQ_INT_PEND_OFFSET 0x0014 -+#define VLYNQ_INT_PTR_OFFSET 0x0018 -+#define VLYNQ_TXMAP_OFFSET 0x001c -+ -+#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020 -+#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024 -+ -+#define VLYNQ_CHIP_VER_OFFSET 0x0040 -+#define VLYNQ_IVR_REGS_OFFSET 0x0060 -+ -+#define VLYNQ_INT_PENDING_REG_PTR 0x14 -+#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14 -+ -+#define VLYNQ_REV_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_REV_OFFSET)) -+#define VLYNQ_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET)) -+#define VLYNQ_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET)) -+#define VLYNQ_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET)) -+#define VLYNQ_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET)) -+#define VLYNQ_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET)) -+#define VLYNQ_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET)) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_RXMAP_SIZE_REG(map) \ -+ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3))) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_RXMAP_OFFSET_REG(map) \ -+ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3))) -+ -+#define VLYNQ_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET)) -+ -+/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */ -+#define VLYNQ_IVR_OFFSET(ivr) \ -+ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) ) -+ -+#define VLYNQ_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(0)) ) -+#define VLYNQ_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(4)) ) -+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ -+ -+#define VLYNQ_IVR_INTEN(ivr) (((unsigned int)(0x80)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTTYPE(ivr) (((unsigned int)(0x40)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTPOL(ivr) (((unsigned int)(0x20)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTVEC(ivr) (((unsigned int)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTALL(ivr) (((unsigned int)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8)) -+ -+ -+ -+/********************************* -+ * Remote VLYNQ register set * -+ *********************************/ -+ -+#define VLYNQ_R_REV_OFFSET 0x0080 -+#define VLYNQ_R_CTRL_OFFSET 0x0084 -+#define VLYNQ_R_STATUS_OFFSET 0x0088 -+#define VLYNQ_R_INT_STAT_OFFSET 0x0090 -+#define VLYNQ_R_INT_PEND_OFFSET 0x0094 -+#define VLYNQ_R_INT_PTR_OFFSET 0x0098 -+#define VLYNQ_R_TXMAP_OFFSET 0x009c -+ -+#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0 -+#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4 -+ -+#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0 -+#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0 -+ -+#define VLYNQ_R_REV_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET)) -+#define VLYNQ_R_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET)) -+#define VLYNQ_R_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET)) -+#define VLYNQ_R_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET)) -+#define VLYNQ_R_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET)) -+#define VLYNQ_R_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET)) -+#define VLYNQ_R_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET)) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_R_RXMAP_SIZE_REG(map) \ -+ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3))) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_R_RXMAP_OFFSET_REG(map) \ -+ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3))) -+ -+#define VLYNQ_R_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET) -+ -+#define VLYNQ_R_IVR_OFFSET(ivr) \ -+ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3)) -+ -+ -+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ -+#define VLYNQ_R_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(0)) ) -+#define VLYNQ_R_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(4)) ) -+ -+ -+/****End of remote register set definition******/ -+ -+ -+/*** Masks for individual register fields ***/ -+ -+#define VLYNQ_MODULE_ID_MASK 0xffff0000 -+#define VLYNQ_MAJOR_REV_MASK 0x0000ff00 -+#define VLYNQ_MINOR_REV_MASK 0x000000ff -+ -+ -+#define VLYNQ_CTL_ILOOP_MASK 0x00000002 -+#define VLYNQ_CTL_INT2CFG_MASK 0x00000080 -+#define VLYNQ_CTL_INTVEC_MASK 0x00001f00 -+#define VLYNQ_CTL_INTEN_MASK 0x00002000 -+#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000 -+#define VLYNQ_CTL_CLKDIR_MASK 0x00008000 -+#define VLYNQ_CTL_CLKDIV_MASK 0x00070000 -+#define VLYNQ_CTL_MODE_MASK 0x00e00000 -+ -+ -+#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */ -+#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */ -+#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */ -+#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */ -+#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */ -+#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */ -+#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */ -+#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */ -+#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */ -+#define VLYNQ_STS_OFLOW_MASK 0x00000200 -+#define VLYNQ_STS_IFLOW_MASK 0x00000400 -+#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */ -+#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */ -+#define VLYNQ_STS_DEBUG_MASK 0xE0000000 -+ -+#define VLYNQ_CTL_INTVEC_SHIFT 0x08 -+#define VLYNQ_CTL_INTEN_SHIFT 0x0D -+#define VLYNQ_CTL_INT2CFG_SHIFT 0x07 -+#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E -+ -+#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80 -+ -+#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000 -+#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff -+ -+#define VLYNQ_IVR_INTEN_MASK 0x80 -+#define VLYNQ_IVR_INTTYPE_MASK 0x40 -+#define VLYNQ_IVR_INTPOL_MASK 0x20 -+ -+ -+/**** Helper macros ****/ -+ -+#define VLYNQ_RESETCB(arg) \ -+ if( pdev->reset_cb != NULL) \ -+ { \ -+ (pdev->reset_cb)(pdev, (arg)); \ -+ } -+ -+#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 ) -+#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 ) -+ -+#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo))) -+#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo))) -+ -+#define VLYNQ_ALIGN4(x) (x)=(x)&(~3) -+ -+ -+/************************************* -+ * Enums * -+ *************************************/ -+ -+/* Initialization options define what operations are -+ * undertaken during vlynq module initialization */ -+typedef enum -+{ -+ /* Init host local memory regions.This allows -+ * local host access remote memory regions */ -+ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01, -+ /* Init host remote memory regions.This allows -+ * remote device access local memory regions */ -+ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02, -+ /* Init local interrupt config*/ -+ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04, -+ /* Init remote interrupt config*/ -+ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08, -+ /* Check link during initialization*/ -+ VLYNQ_INIT_CHECK_LINK =0x10, -+ /* configure clock during init */ -+ VLYNQ_INIT_CONFIG_CLOCK =0x20, -+ /* Clear errors during init */ -+ VLYNQ_INIT_CLEAR_ERRORS =0x40, -+ /* All options */ -+ VLYNQ_INIT_PERFORM_ALL =0x7F -+}VLYNQ_INIT_OPTIONS; -+ -+ -+/* VLYNQ_DEV_TYPE identifies local or remote device */ -+typedef enum -+{ -+ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */ -+ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */ -+}VLYNQ_DEV_TYPE; -+ -+ -+/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */ -+typedef enum -+{ -+ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/ -+ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */ -+ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */ -+}VLYNQ_CLK_SOURCE; -+ -+ -+/* VLYNQ_DRV_STATE indicates the current driver state */ -+typedef enum -+{ -+ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */ -+ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */ -+ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */ -+ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */ -+ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */ -+}VLYNQ_DRV_STATE; -+ -+ -+/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */ -+typedef enum -+{ -+ VLYNQ_BUS_WIDTH_3 = 3, -+ VLYNQ_BUS_WIDTH_5 = 5, -+ VLYNQ_BUS_WIDTH_7 = 7, -+ VLYNQ_BUS_WIDTH_9 = 9 -+}VLYNQ_BUS_WIDTH; -+ -+ -+/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq -+ * interrupts are processed by the host or passed on to the -+ * remote device. -+ */ -+typedef enum -+{ -+ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */ -+ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */ -+}VLYNQ_LOCAL_INT_CONFIG; -+ -+ -+/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote -+ * interrupts are to be handled by the SOC system ISR -+ * or via the vlynq root ISR -+ */ -+typedef enum -+{ -+ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */ -+ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */ -+}VLYNQ_REMOTE_INT_CONFIG; -+ -+ -+/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */ -+typedef enum -+{ -+ VLYNQ_INTR_ACTIVE_HIGH = 0, -+ VLYNQ_INTR_ACTIVE_LOW = 1 -+}VLYNQ_INTR_POLARITY; -+ -+ -+/* VLYNQ_INTR_TYPE - vlynq interrupt type */ -+typedef enum -+{ -+ VLYNQ_INTR_LEVEL = 0, -+ VLYNQ_INTR_PULSED = 1 -+}VLYNQ_INTR_TYPE; -+ -+ -+/* VLYNQ_RESET_MODE - vlynq reset mode */ -+typedef enum -+{ -+ VLYNQ_RESET_ASSERT, /* hold device in reset state */ -+ VLYNQ_RESET_DEASSERT, /* release device from reset state */ -+ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */ -+ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */ -+ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */ -+ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */ -+}VLYNQ_RESET_MODE; -+ -+ -+ -+/************************************* -+ * Typedefs * -+ *************************************/ -+ -+struct VLYNQ_DEV_t; /*forward declaration*/ -+ -+/*--------Function Pointers defintions -----------*/ -+ -+/* prototype for interrupt handler definition */ -+typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3); -+ -+typedef void -+(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode); -+ -+typedef void -+(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */ -+ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */ -+ unsigned int dwStatRegVal); /* Value of the relevant status register */ -+ -+ -+/*-------Structure Definitions------------*/ -+ -+typedef struct VLYNQ_MEMORY_MAP_t -+{ -+ unsigned int Txmap; -+ unsigned int RxOffset[VLYNQ_MAX_MEMORY_REGIONS]; -+ unsigned int RxSize[VLYNQ_MAX_MEMORY_REGIONS]; -+}VLYNQ_MEMORY_MAP; -+ -+ -+/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt -+ * settings in vlynq Control register */ -+typedef struct VLYNQ_INTERRUPT_CNTRL_t -+{ -+ /* vlynq interrupts handled by host or remote - maps to -+ * intLocal bit in vlynq control register */ -+ VLYNQ_LOCAL_INT_CONFIG intLocal; -+ -+ /* remote interrupts handled by vlynq isr or host system -+ * interrupt controller - maps to the int2Cfg in vlynq -+ * control register */ -+ VLYNQ_REMOTE_INT_CONFIG intRemote; -+ -+ /* bit in pending/set register used for module interrupts*/ -+ unsigned int map_vector; -+ -+ /* used only if remote interrupts are to be handled by system ISR*/ -+ unsigned int intr_ptr; -+ -+}VLYNQ_INTERRUPT_CNTRL; -+ -+ -+/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold -+ * the interrupt dispatch table. The vlynq_root_isr() indexes into this -+ * table to identify the ISR to be invoked -+ */ -+typedef struct VLYNQ_INTR_CNTRL_ICB_t -+{ -+ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */ -+ void *arg1 ; /* Arg 1 for the ISR */ -+ void *arg2 ; /* Arg 2 for the ISR */ -+ void *arg3 ; /* Arg 3 for the ISR */ -+ unsigned int isrCount; /* number of ISR invocations so far */ -+ struct VLYNQ_INTR_CNTRL_ICB_t *next; -+}VLYNQ_INTR_CNTRL_ICB; -+ -+/* overlay of vlynq register set */ -+typedef struct VLYNQ_REG_SET_t -+{ -+ unsigned int revision; /*offset : 0x00 */ -+ unsigned int control; /* 0x04*/ -+ unsigned int status; /* 0x08*/ -+ unsigned int pad1; /* 0x0c*/ -+ unsigned int intStatus; /*0x10*/ -+ unsigned int intPending; /*0x14*/ -+ unsigned int intPtr; /*0x18*/ -+ unsigned int txMap; /*0x1C*/ -+ unsigned int rxSize1; /*0x20*/ -+ unsigned int rxOffset1; /*0x24*/ -+ unsigned int rxSize2; /*0x28*/ -+ unsigned int rxOffset2; /*0x2C*/ -+ unsigned int rxSize3; /*0x30*/ -+ unsigned int rxOffset3; /*0x34*/ -+ unsigned int rxSize4; /*0x38*/ -+ unsigned int rxOffset4; /*0x3C*/ -+ unsigned int chipVersion; /*0x40*/ -+ unsigned int pad2[8]; -+ unsigned int ivr30; /*0x60*/ -+ unsigned int ivr74; /*0x64*/ -+ unsigned int pad3[7]; -+}VLYNQ_REG_SET; -+ -+ -+typedef struct VLYNQ_DEV_t -+{ -+ /** module index:1,2,3... used for debugging purposes */ -+ unsigned int dev_idx; -+ -+ /*VLYNQ module base address */ -+ unsigned int module_base; -+ -+ /* clock source selection */ -+ VLYNQ_CLK_SOURCE clk_source; -+ -+ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */ -+ unsigned int clk_div; -+ -+ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */ -+ VLYNQ_DRV_STATE state; -+ -+ /* Valid VLYNQ bus width, filled by driver */ -+ VLYNQ_BUS_WIDTH width; -+ -+ /* local memory mapping */ -+ VLYNQ_MEMORY_MAP local_mem; -+ -+ /* remote memory mapping */ -+ VLYNQ_MEMORY_MAP remote_mem; -+ -+ /* Local module interrupt params */ -+ VLYNQ_INTERRUPT_CNTRL local_irq; -+ -+ /* remote module interrupt params */ -+ VLYNQ_INTERRUPT_CNTRL remote_irq; -+ -+ /*** ICB related fields **/ -+ -+ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) + -+ * expansion slots for shared interrupts*/ -+ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS]; -+ VLYNQ_INTR_CNTRL_ICB *freelist; -+ -+ /* table holding mapping between intVector and the bit position the interrupt -+ * is mapped to(mapVector)*/ -+ char vector_map[32]; -+ -+ /* user callback for vlynq events, NULL if unused */ -+ VLYNQ_REPORT_CB report_cb; -+ -+ /* user callback for resetting/realeasing remote device */ -+ VLYNQ_RESET_REMOTE reset_cb; -+ -+ /*** Handles provided for direct access to register set if need be -+ * Must be intialized to point to appropriate address during -+ * vlynq_init */ -+ volatile VLYNQ_REG_SET * local; -+ volatile VLYNQ_REG_SET * remote; -+ -+ unsigned int intCount; /* number of interrupts generated so far */ -+ unsigned int isrCount; /* number of ISR invocations so far */ -+}VLYNQ_DEV; -+ -+ -+typedef struct VLYNQ_ISR_ARGS_t -+{ -+ int irq; -+ void * arg; -+ void * regset; -+}VLYNQ_ISR_ARGS; -+ -+ -+/**************************************** -+ * Function Prototypes * -+ * API exported by generic vlynq driver * -+ ****************************************/ -+/* Initialization function */ -+int vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options); -+ -+/* Check vlynq link */ -+unsigned int vlynq_link_check( VLYNQ_DEV * pdev); -+ -+/* Set interrupt vector in local or remote device */ -+int vlynq_interrupt_vector_set( VLYNQ_DEV *pdev, -+ unsigned int int_vector, -+ unsigned int map_vector, -+ VLYNQ_DEV_TYPE dev, -+ VLYNQ_INTR_POLARITY pol, -+ VLYNQ_INTR_TYPE type); -+ -+ -+int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev, -+ unsigned int int_vector, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int enable); -+ -+unsigned int vlynq_interrupt_get_count( VLYNQ_DEV *pdev, -+ unsigned int map_vector); -+ -+int vlynq_install_isr( VLYNQ_DEV *pdev, -+ unsigned int map_vector, -+ VLYNQ_INTR_CNTRL_ISR isr, -+ void *arg1, void *arg2, void *arg3); -+ -+int vlynq_uninstall_isr( VLYNQ_DEV *pdev, -+ unsigned int map_vector, -+ void *arg1, void *arg2, void *arg3); -+ -+ -+void vlynq_root_isr(void *arg); -+ -+void vlynq_delay(unsigned int clktime); -+ -+/* The following functions, provide better granularity in setting -+ * interrupt parameters. (for better support of linux INT Controller) -+ * Note: The interrupt source is identified by "map_vector"- the bit -+ * position in interrupt status register*/ -+ -+int vlynq_interrupt_vector_map(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int int_vector, -+ unsigned int map_vector); -+ -+int vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int map_vector, -+ VLYNQ_INTR_POLARITY pol); -+ -+int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev , -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector); -+ -+int vlynq_interrupt_set_type(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int map_vector, -+ VLYNQ_INTR_TYPE type); -+ -+int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector); -+ -+int vlynq_interrupt_enable(VLYNQ_DEV* pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int map_vector); -+ -+int vlynq_interrupt_disable(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int map_vector); -+ -+ -+ -+ -+ -+#endif /* _VLYNQ_HAL_H_ */ -diff -urN linux.old/include/asm-mips/ar7/vlynq_hal.h linux.dev/include/asm-mips/ar7/vlynq_hal.h ---- linux.old/include/asm-mips/ar7/vlynq_hal.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/vlynq_hal.h 2005-11-10 01:10:46.095590250 +0100 -@@ -0,0 +1,606 @@ -+/*************************************************************************** -+**+----------------------------------------------------------------------+** -+**| **** |** -+**| **** |** -+**| ******o*** |** -+**| ********_///_**** |** -+**| ***** /_//_/ **** |** -+**| ** ** (__/ **** |** -+**| ********* |** -+**| **** |** -+**| *** |** -+**| |** -+**| Copyright (c) 2003 Texas Instruments Incorporated |** -+**| ALL RIGHTS RESERVED |** -+**| |** -+**| Permission is hereby granted to licensees of Texas Instruments |** -+**| Incorporated (TI) products to use this computer program for the sole |** -+**| purpose of implementing a licensee product based on TI products. |** -+**| No other rights to reproduce, use, or disseminate this computer |** -+**| program, whether in part or in whole, are granted. |** -+**| |** -+**| TI makes no representation or warranties with respect to the |** -+**| performance of this computer program, and specifically disclaims |** -+**| any responsibility for any damages, special or consequential, |** -+**| connected with the use of this program. |** -+**| |** -+**+----------------------------------------------------------------------+** -+***************************************************************************/ -+ -+/********************************************************************************* -+ * ------------------------------------------------------------------------------ -+ * Module : vlynq_hal.h -+ * Description : -+ * This header file provides the set of functions exported by the -+ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper. -+ * ------------------------------------------------------------------------------ -+ *********************************************************************************/ -+ -+#ifndef _VLYNQ_HAL_H_ -+#define _VLYNQ_HAL_H_ -+ -+#include -+#include -+ -+#ifndef PRIVATE -+#define PRIVATE static -+#endif -+ -+#ifndef GLOBAL -+#define GLOBAL -+#endif -+ -+/* Enable/Disable debug feature */ -+#undef VLYNQ_DEBUG -+ -+#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */ -+#define debugPrint(format,args...) -+#else -+#define debugPrint(format,args...) -+#endif -+ -+/* Error defines */ -+#define VLYNQ_SUCCESS 0 -+ -+#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */ -+#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1) -+#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2) -+#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3) -+#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4) -+#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5) -+#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6) -+#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7) -+ -+/* Vlynq Defines and Macros */ -+ -+#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */ -+ -+/* Base address of module */ -+#define VLYNQ_BASE (pdev->module_base) -+ -+#define VLYNQ_REMOTE_REGS_OFFSET 0x0080 -+ -+#define VLYNQ_REV_OFFSET 0x0000 -+#define VLYNQ_CTRL_OFFSET 0x0004 -+#define VLYNQ_STATUS_OFFSET 0x0008 -+#define VLYNQ_INT_STAT_OFFSET 0x0010 -+#define VLYNQ_INT_PEND_OFFSET 0x0014 -+#define VLYNQ_INT_PTR_OFFSET 0x0018 -+#define VLYNQ_TXMAP_OFFSET 0x001c -+ -+#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020 -+#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024 -+ -+#define VLYNQ_CHIP_VER_OFFSET 0x0040 -+#define VLYNQ_IVR_REGS_OFFSET 0x0060 -+ -+#define VLYNQ_INT_PENDING_REG_PTR 0x14 -+#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14 -+ -+#define VLYNQ_REV_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_REV_OFFSET)) -+#define VLYNQ_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET)) -+#define VLYNQ_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET)) -+#define VLYNQ_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET)) -+#define VLYNQ_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET)) -+#define VLYNQ_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET)) -+#define VLYNQ_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET)) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_RXMAP_SIZE_REG(map) \ -+ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3))) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_RXMAP_OFFSET_REG(map) \ -+ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3))) -+ -+#define VLYNQ_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET)) -+ -+/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */ -+#define VLYNQ_IVR_OFFSET(ivr) \ -+ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) ) -+ -+#define VLYNQ_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(0)) ) -+#define VLYNQ_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(4)) ) -+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ -+ -+#define VLYNQ_IVR_INTEN(ivr) (((UINT32)(0x80)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTTYPE(ivr) (((UINT32)(0x40)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTPOL(ivr) (((UINT32)(0x20)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTVEC(ivr) (((UINT32)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTALL(ivr) (((UINT32)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8)) -+ -+ -+ -+/********************************* -+ * Remote VLYNQ register set * -+ *********************************/ -+ -+#define VLYNQ_R_REV_OFFSET 0x0080 -+#define VLYNQ_R_CTRL_OFFSET 0x0084 -+#define VLYNQ_R_STATUS_OFFSET 0x0088 -+#define VLYNQ_R_INT_STAT_OFFSET 0x0090 -+#define VLYNQ_R_INT_PEND_OFFSET 0x0094 -+#define VLYNQ_R_INT_PTR_OFFSET 0x0098 -+#define VLYNQ_R_TXMAP_OFFSET 0x009c -+ -+#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0 -+#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4 -+ -+#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0 -+#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0 -+ -+#define VLYNQ_R_REV_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET)) -+#define VLYNQ_R_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET)) -+#define VLYNQ_R_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET)) -+#define VLYNQ_R_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET)) -+#define VLYNQ_R_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET)) -+#define VLYNQ_R_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET)) -+#define VLYNQ_R_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET)) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_R_RXMAP_SIZE_REG(map) \ -+ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3))) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_R_RXMAP_OFFSET_REG(map) \ -+ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3))) -+ -+#define VLYNQ_R_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET) -+ -+#define VLYNQ_R_IVR_OFFSET(ivr) \ -+ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3)) -+ -+ -+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ -+#define VLYNQ_R_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(0)) ) -+#define VLYNQ_R_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(4)) ) -+ -+ -+/****End of remote register set definition******/ -+ -+ -+/*** Masks for individual register fields ***/ -+ -+#define VLYNQ_MODULE_ID_MASK 0xffff0000 -+#define VLYNQ_MAJOR_REV_MASK 0x0000ff00 -+#define VLYNQ_MINOR_REV_MASK 0x000000ff -+ -+ -+#define VLYNQ_CTL_ILOOP_MASK 0x00000002 -+#define VLYNQ_CTL_INT2CFG_MASK 0x00000080 -+#define VLYNQ_CTL_INTVEC_MASK 0x00001f00 -+#define VLYNQ_CTL_INTEN_MASK 0x00002000 -+#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000 -+#define VLYNQ_CTL_CLKDIR_MASK 0x00008000 -+#define VLYNQ_CTL_CLKDIV_MASK 0x00070000 -+#define VLYNQ_CTL_MODE_MASK 0x00e00000 -+ -+ -+#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */ -+#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */ -+#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */ -+#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */ -+#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */ -+#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */ -+#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */ -+#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */ -+#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */ -+#define VLYNQ_STS_OFLOW_MASK 0x00000200 -+#define VLYNQ_STS_IFLOW_MASK 0x00000400 -+#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */ -+#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */ -+#define VLYNQ_STS_DEBUG_MASK 0xE0000000 -+ -+#define VLYNQ_CTL_INTVEC_SHIFT 0x08 -+#define VLYNQ_CTL_INTEN_SHIFT 0x0D -+#define VLYNQ_CTL_INT2CFG_SHIFT 0x07 -+#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E -+ -+#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80 -+ -+#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000 -+#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff -+ -+#define VLYNQ_IVR_INTEN_MASK 0x80 -+#define VLYNQ_IVR_INTTYPE_MASK 0x40 -+#define VLYNQ_IVR_INTPOL_MASK 0x20 -+ -+ -+/**** Helper macros ****/ -+ -+#define VLYNQ_RESETCB(arg) \ -+ if( pdev->reset_cb != NULL) \ -+ { \ -+ (pdev->reset_cb)(pdev, (arg)); \ -+ } -+ -+#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 ) -+#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 ) -+ -+#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo))) -+#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo))) -+ -+#define VLYNQ_ALIGN4(x) (x)=(x)&(~3) -+ -+ -+/************************************* -+ * Enums * -+ *************************************/ -+ -+/* Initialization options define what operations are -+ * undertaken during vlynq module initialization */ -+typedef enum -+{ -+ /* Init host local memory regions.This allows -+ * local host access remote memory regions */ -+ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01, -+ /* Init host remote memory regions.This allows -+ * remote device access local memory regions */ -+ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02, -+ /* Init local interrupt config*/ -+ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04, -+ /* Init remote interrupt config*/ -+ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08, -+ /* Check link during initialization*/ -+ VLYNQ_INIT_CHECK_LINK =0x10, -+ /* configure clock during init */ -+ VLYNQ_INIT_CONFIG_CLOCK =0x20, -+ /* Clear errors during init */ -+ VLYNQ_INIT_CLEAR_ERRORS =0x40, -+ /* All options */ -+ VLYNQ_INIT_PERFORM_ALL =0x7F -+}VLYNQ_INIT_OPTIONS; -+ -+ -+/* VLYNQ_DEV_TYPE identifies local or remote device */ -+typedef enum -+{ -+ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */ -+ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */ -+}VLYNQ_DEV_TYPE; -+ -+ -+/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */ -+typedef enum -+{ -+ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/ -+ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */ -+ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */ -+}VLYNQ_CLK_SOURCE; -+ -+ -+/* VLYNQ_DRV_STATE indicates the current driver state */ -+typedef enum -+{ -+ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */ -+ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */ -+ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */ -+ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */ -+ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */ -+}VLYNQ_DRV_STATE; -+ -+ -+/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */ -+typedef enum -+{ -+ VLYNQ_BUS_WIDTH_3 = 3, -+ VLYNQ_BUS_WIDTH_5 = 5, -+ VLYNQ_BUS_WIDTH_7 = 7, -+ VLYNQ_BUS_WIDTH_9 = 9 -+}VLYNQ_BUS_WIDTH; -+ -+ -+/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq -+ * interrupts are processed by the host or passed on to the -+ * remote device. -+ */ -+typedef enum -+{ -+ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */ -+ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */ -+}VLYNQ_LOCAL_INT_CONFIG; -+ -+ -+/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote -+ * interrupts are to be handled by the SOC system ISR -+ * or via the vlynq root ISR -+ */ -+typedef enum -+{ -+ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */ -+ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */ -+}VLYNQ_REMOTE_INT_CONFIG; -+ -+ -+/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */ -+typedef enum -+{ -+ VLYNQ_INTR_ACTIVE_HIGH = 0, -+ VLYNQ_INTR_ACTIVE_LOW = 1 -+}VLYNQ_INTR_POLARITY; -+ -+ -+/* VLYNQ_INTR_TYPE - vlynq interrupt type */ -+typedef enum -+{ -+ VLYNQ_INTR_LEVEL = 0, -+ VLYNQ_INTR_PULSED = 1 -+}VLYNQ_INTR_TYPE; -+ -+ -+/* VLYNQ_RESET_MODE - vlynq reset mode */ -+typedef enum -+{ -+ VLYNQ_RESET_ASSERT, /* hold device in reset state */ -+ VLYNQ_RESET_DEASSERT, /* release device from reset state */ -+ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */ -+ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */ -+ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */ -+ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */ -+}VLYNQ_RESET_MODE; -+ -+ -+ -+/************************************* -+ * Typedefs * -+ *************************************/ -+ -+struct VLYNQ_DEV_t; /*forward declaration*/ -+ -+/*--------Function Pointers defintions -----------*/ -+ -+/* prototype for interrupt handler definition */ -+typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3); -+ -+typedef void -+(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode); -+ -+typedef void -+(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */ -+ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */ -+ UINT32 dwStatRegVal); /* Value of the relevant status register */ -+ -+ -+/*-------Structure Definitions------------*/ -+ -+typedef struct VLYNQ_MEMORY_MAP_t -+{ -+ UINT32 Txmap; -+ UINT32 RxOffset[VLYNQ_MAX_MEMORY_REGIONS]; -+ UINT32 RxSize[VLYNQ_MAX_MEMORY_REGIONS]; -+}VLYNQ_MEMORY_MAP; -+ -+ -+/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt -+ * settings in vlynq Control register */ -+typedef struct VLYNQ_INTERRUPT_CNTRL_t -+{ -+ /* vlynq interrupts handled by host or remote - maps to -+ * intLocal bit in vlynq control register */ -+ VLYNQ_LOCAL_INT_CONFIG intLocal; -+ -+ /* remote interrupts handled by vlynq isr or host system -+ * interrupt controller - maps to the int2Cfg in vlynq -+ * control register */ -+ VLYNQ_REMOTE_INT_CONFIG intRemote; -+ -+ /* bit in pending/set register used for module interrupts*/ -+ UINT32 map_vector; -+ -+ /* used only if remote interrupts are to be handled by system ISR*/ -+ UINT32 intr_ptr; -+ -+}VLYNQ_INTERRUPT_CNTRL; -+ -+ -+/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold -+ * the interrupt dispatch table. The vlynq_root_isr() indexes into this -+ * table to identify the ISR to be invoked -+ */ -+typedef struct VLYNQ_INTR_CNTRL_ICB_t -+{ -+ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */ -+ void *arg1 ; /* Arg 1 for the ISR */ -+ void *arg2 ; /* Arg 2 for the ISR */ -+ void *arg3 ; /* Arg 3 for the ISR */ -+ UINT32 isrCount; /* number of ISR invocations so far */ -+ struct VLYNQ_INTR_CNTRL_ICB_t *next; -+}VLYNQ_INTR_CNTRL_ICB; -+ -+/* overlay of vlynq register set */ -+typedef struct VLYNQ_REG_SET_t -+{ -+ UINT32 revision; /*offset : 0x00 */ -+ UINT32 control; /* 0x04*/ -+ UINT32 status; /* 0x08*/ -+ UINT32 pad1; /* 0x0c*/ -+ UINT32 intStatus; /*0x10*/ -+ UINT32 intPending; /*0x14*/ -+ UINT32 intPtr; /*0x18*/ -+ UINT32 txMap; /*0x1C*/ -+ UINT32 rxSize1; /*0x20*/ -+ UINT32 rxOffset1; /*0x24*/ -+ UINT32 rxSize2; /*0x28*/ -+ UINT32 rxOffset2; /*0x2C*/ -+ UINT32 rxSize3; /*0x30*/ -+ UINT32 rxOffset3; /*0x34*/ -+ UINT32 rxSize4; /*0x38*/ -+ UINT32 rxOffset4; /*0x3C*/ -+ UINT32 chipVersion; /*0x40*/ -+ UINT32 pad2[8]; -+ UINT32 ivr30; /*0x60*/ -+ UINT32 ivr74; /*0x64*/ -+ UINT32 pad3[7]; -+}VLYNQ_REG_SET; -+ -+ -+typedef struct VLYNQ_DEV_t -+{ -+ /** module index:1,2,3... used for debugging purposes */ -+ UINT32 dev_idx; -+ -+ /*VLYNQ module base address */ -+ UINT32 module_base; -+ -+ /* clock source selection */ -+ VLYNQ_CLK_SOURCE clk_source; -+ -+ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */ -+ UINT32 clk_div; -+ -+ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */ -+ VLYNQ_DRV_STATE state; -+ -+ /* Valid VLYNQ bus width, filled by driver */ -+ VLYNQ_BUS_WIDTH width; -+ -+ /* local memory mapping */ -+ VLYNQ_MEMORY_MAP local_mem; -+ -+ /* remote memory mapping */ -+ VLYNQ_MEMORY_MAP remote_mem; -+ -+ /* Local module interrupt params */ -+ VLYNQ_INTERRUPT_CNTRL local_irq; -+ -+ /* remote module interrupt params */ -+ VLYNQ_INTERRUPT_CNTRL remote_irq; -+ -+ /*** ICB related fields **/ -+ -+ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) + -+ * expansion slots for shared interrupts*/ -+ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS]; -+ VLYNQ_INTR_CNTRL_ICB *freelist; -+ -+ /* table holding mapping between intVector and the bit position the interrupt -+ * is mapped to(mapVector)*/ -+ INT8 vector_map[32]; -+ -+ /* user callback for vlynq events, NULL if unused */ -+ VLYNQ_REPORT_CB report_cb; -+ -+ /* user callback for resetting/realeasing remote device */ -+ VLYNQ_RESET_REMOTE reset_cb; -+ -+ /*** Handles provided for direct access to register set if need be -+ * Must be intialized to point to appropriate address during -+ * vlynq_init */ -+ volatile VLYNQ_REG_SET * local; -+ volatile VLYNQ_REG_SET * remote; -+ -+ UINT32 intCount; /* number of interrupts generated so far */ -+ UINT32 isrCount; /* number of ISR invocations so far */ -+}VLYNQ_DEV; -+ -+ -+typedef struct VLYNQ_ISR_ARGS_t -+{ -+ int irq; -+ void * arg; -+ void * regset; -+}VLYNQ_ISR_ARGS; -+ -+ -+/**************************************** -+ * Function Prototypes * -+ * API exported by generic vlynq driver * -+ ****************************************/ -+/* Initialization function */ -+GLOBAL INT32 vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options); -+ -+/* Check vlynq link */ -+GLOBAL UINT32 vlynq_link_check( VLYNQ_DEV * pdev); -+ -+/* Set interrupt vector in local or remote device */ -+GLOBAL INT32 vlynq_interrupt_vector_set( VLYNQ_DEV *pdev, -+ UINT32 int_vector, -+ UINT32 map_vector, -+ VLYNQ_DEV_TYPE dev, -+ VLYNQ_INTR_POLARITY pol, -+ VLYNQ_INTR_TYPE type); -+ -+ -+GLOBAL INT32 vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev, -+ UINT32 int_vector, -+ VLYNQ_DEV_TYPE dev, -+ UINT32 enable); -+ -+GLOBAL UINT32 vlynq_interrupt_get_count( VLYNQ_DEV *pdev, -+ UINT32 map_vector); -+ -+GLOBAL INT32 vlynq_install_isr( VLYNQ_DEV *pdev, -+ UINT32 map_vector, -+ VLYNQ_INTR_CNTRL_ISR isr, -+ void *arg1, void *arg2, void *arg3); -+ -+GLOBAL INT32 vlynq_uninstall_isr( VLYNQ_DEV *pdev, -+ UINT32 map_vector, -+ void *arg1, void *arg2, void *arg3); -+ -+ -+GLOBAL void vlynq_root_isr(void *arg); -+ -+GLOBAL void vlynq_delay(UINT32 clktime); -+ -+/* The following functions, provide better granularity in setting -+ * interrupt parameters. (for better support of linux INT Controller) -+ * Note: The interrupt source is identified by "map_vector"- the bit -+ * position in interrupt status register*/ -+ -+GLOBAL INT32 vlynq_interrupt_vector_map(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ UINT32 int_vector, -+ UINT32 map_vector); -+ -+GLOBAL INT32 vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ UINT32 map_vector, -+ VLYNQ_INTR_POLARITY pol); -+ -+GLOBAL INT32 vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev , -+ VLYNQ_DEV_TYPE dev_type, -+ UINT32 map_vector); -+ -+GLOBAL INT32 vlynq_interrupt_set_type(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ UINT32 map_vector, -+ VLYNQ_INTR_TYPE type); -+ -+GLOBAL INT32 vlynq_interrupt_get_type( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ UINT32 map_vector); -+ -+GLOBAL INT32 vlynq_interrupt_enable(VLYNQ_DEV* pdev, -+ VLYNQ_DEV_TYPE dev, -+ UINT32 map_vector); -+ -+GLOBAL INT32 vlynq_interrupt_disable(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ UINT32 map_vector); -+ -+ -+ -+ -+ -+#endif /* _VLYNQ_HAL_H_ */ -diff -urN linux.old/include/asm-mips/ar7/vlynq_hal_params.h linux.dev/include/asm-mips/ar7/vlynq_hal_params.h ---- linux.old/include/asm-mips/ar7/vlynq_hal_params.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/vlynq_hal_params.h 2005-11-10 01:10:46.095590250 +0100 -@@ -0,0 +1,50 @@ -+/*************************************************************************** -+**+----------------------------------------------------------------------+** -+**| **** |** -+**| **** |** -+**| ******o*** |** -+**| ********_///_**** |** -+**| ***** /_//_/ **** |** -+**| ** ** (__/ **** |** -+**| ********* |** -+**| **** |** -+**| *** |** -+**| |** -+**| Copyright (c) 2003 Texas Instruments Incorporated |** -+**| ALL RIGHTS RESERVED |** -+**| |** -+**| Permission is hereby granted to licensees of Texas Instruments |** -+**| Incorporated (TI) products to use this computer program for the sole |** -+**| purpose of implementing a licensee product based on TI products. |** -+**| No other rights to reproduce, use, or disseminate this computer |** -+**| program, whether in part or in whole, are granted. |** -+**| |** -+**| TI makes no representation or warranties with respect to the |** -+**| performance of this computer program, and specifically disclaims |** -+**| any responsibility for any damages, special or consequential, |** -+**| connected with the use of this program. |** -+**| |** -+**+----------------------------------------------------------------------+** -+***************************************************************************/ -+ -+/* This file defines Vlynq module parameters*/ -+ -+#ifndef _VLYNQ_HAL_PARAMS_H -+#define _VLYNQ_HAL_PARAMS_H -+ -+ /* number of VLYNQ memory regions supported */ -+#define VLYNQ_MAX_MEMORY_REGIONS 0x04 -+ -+ /* Max.number of external interrupt inputs supported by VLYNQ module */ -+#define VLYNQ_IVR_MAXIVR 0x08 -+ -+#define VLYNQ_CLK_DIV_MAX 0x08 -+#define VLYNQ_CLK_DIV_MIN 0x01 -+ -+ -+/*** the total number of entries allocated for ICB would be -+ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/ -+#define VLYNQ_IVR_CHAIN_SLOTS 10 -+ -+ -+#endif /* _VLYNQ_HAL_PARAMS_H */ -diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h ---- linux.old/include/asm-mips/io.h 2003-08-25 13:44:43.000000000 +0200 -+++ linux.dev/include/asm-mips/io.h 2005-11-10 01:14:16.400733500 +0100 -@@ -61,9 +61,9 @@ - * Change "struct page" to physical address. - */ - #ifdef CONFIG_64BIT_PHYS_ADDR --#define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT) -+#define page_to_phys(page) (((u64)(page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET) - #else --#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) -+#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET) - #endif - - #define IO_SPACE_LIMIT 0xffff -diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h ---- linux.old/include/asm-mips/irq.h 2003-08-25 13:44:43.000000000 +0200 -+++ linux.dev/include/asm-mips/irq.h 2005-11-10 01:12:43.950955750 +0100 -@@ -14,7 +14,20 @@ - #include - #include - -+#ifdef CONFIG_AR7 -+/* MIPS has 8 irqs -+ * AR7 has 40 primary and 32 secondary irqs -+ * vlynq0 has 32 irqs -+ * vlynq1 has 32 irqs -+ */ -+#ifdef CONFIG_AR7_VLYNQ -+#define NR_IRQS (80 + 32 * CONFIG_AR7_VLYNQ_PORTS) -+#else -+#define NR_IRQS 80 -+#endif -+#else - #define NR_IRQS 128 /* Largest number of ints of all machines. */ -+#endif - - #ifdef CONFIG_I8259 - static inline int irq_cannonicalize(int irq) -diff -urN linux.old/include/asm-mips/mips-boards/prom.h linux.dev/include/asm-mips/mips-boards/prom.h ---- linux.old/include/asm-mips/mips-boards/prom.h 2001-09-09 19:43:02.000000000 +0200 -+++ linux.dev/include/asm-mips/mips-boards/prom.h 2005-11-10 01:14:16.436735750 +0100 -@@ -33,7 +33,7 @@ - extern void prom_init_cmdline(void); - extern void prom_meminit(void); - extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); --extern void prom_free_prom_memory (void); -+extern unsigned long prom_free_prom_memory (void); - extern void mips_display_message(const char *str); - extern void mips_display_word(unsigned int num); - extern int get_ethernet_addr(char *ethernet_addr); -diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h ---- linux.old/include/asm-mips/page.h 2004-02-18 14:36:32.000000000 +0100 -+++ linux.dev/include/asm-mips/page.h 2005-11-10 01:14:16.436735750 +0100 -@@ -12,6 +12,7 @@ - - #include - #include -+#include - - #ifdef __KERNEL__ - -@@ -129,7 +130,7 @@ - - #define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) - #define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) --#define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT)) -+#define virt_to_page(kaddr) (mem_map + ((__pa(kaddr)-PHYS_OFFSET) >> PAGE_SHIFT)) - #define VALID_PAGE(page) ((page - mem_map) < max_mapnr) - - #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ -diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgtable-32.h ---- linux.old/include/asm-mips/pgtable-32.h 2004-02-18 14:36:32.000000000 +0100 -+++ linux.dev/include/asm-mips/pgtable-32.h 2005-11-10 01:14:16.436735750 +0100 -@@ -108,7 +108,7 @@ - * and a page entry and page directory to the page they refer to. - */ - --#ifdef CONFIG_CPU_VR41XX -+#if defined(CONFIG_CPU_VR41XX) - #define mk_pte(page, pgprot) \ - ({ \ - pte_t __pte; \ -@@ -123,13 +123,14 @@ - ({ \ - pte_t __pte; \ - \ -- pte_val(__pte) = ((phys_t)(page - mem_map) << PAGE_SHIFT) | \ -- pgprot_val(pgprot); \ -+ pte_val(__pte) = (((phys_t)(page - mem_map) << PAGE_SHIFT) + \ -+ PHYS_OFFSET) | pgprot_val(pgprot); \ - \ - __pte; \ - }) - #endif - -+ - static inline pte_t mk_pte_phys(phys_t physpage, pgprot_t pgprot) - { - #ifdef CONFIG_CPU_VR41XX -@@ -175,12 +176,12 @@ - set_pte(ptep, __pte(0)); - } - --#ifdef CONFIG_CPU_VR41XX -+#if defined(CONFIG_CPU_VR41XX) - #define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> (PAGE_SHIFT+2))))) - #define __mk_pte(page_nr,pgprot) __pte(((page_nr) << (PAGE_SHIFT+2)) | pgprot_val(pgprot)) - #else --#define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> PAGE_SHIFT)))) --#define __mk_pte(page_nr,pgprot) __pte(((page_nr) << PAGE_SHIFT) | pgprot_val(pgprot)) -+#define pte_page(x) (mem_map+((unsigned long)((((x).pte_low-PHYS_OFFSET) >> PAGE_SHIFT)))) -+#define __mk_pte(page_nr,pgprot) __pte((((page_nr) << PAGE_SHIFT)+PHYS_OFFSET)|pgprot_val(pgprot)) - #endif - - #endif -diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h ---- linux.old/include/asm-mips/serial.h 2005-01-19 15:10:12.000000000 +0100 -+++ linux.dev/include/asm-mips/serial.h 2005-11-10 01:14:16.436735750 +0100 -@@ -65,6 +65,16 @@ - - #define C_P(card,port) (((card)<<6|(port)<<3) + 1) - -+#ifdef CONFIG_AR7 -+#include -+#include -+#define AR7_SERIAL_PORT_DEFNS \ -+ { 0, AR7_BASE_BAUD, AR7_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \ -+ { 0, AR7_BASE_BAUD, AR7_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS }, -+#else -+#define AR7_SERIAL_PORT_DEFNS -+#endif -+ - #ifdef CONFIG_MIPS_JAZZ - #define _JAZZ_SERIAL_INIT(int, base) \ - { .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \ -@@ -468,6 +478,7 @@ - #endif - - #define SERIAL_PORT_DFNS \ -+ AR7_SERIAL_PORT_DEFNS \ - ATLAS_SERIAL_PORT_DEFNS \ - AU1000_SERIAL_PORT_DEFNS \ - COBALT_SERIAL_PORT_DEFNS \ diff --git a/target/linux/ar7-2.4/patches/001-flash_map.patch b/target/linux/ar7-2.4/patches/001-flash_map.patch deleted file mode 100644 index bd07805c6c..0000000000 --- a/target/linux/ar7-2.4/patches/001-flash_map.patch +++ /dev/null @@ -1,307 +0,0 @@ -diff -urN linux.old/drivers/mtd/maps/ar7-flash.c linux.dev/drivers/mtd/maps/ar7-flash.c ---- linux.old/drivers/mtd/maps/ar7-flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/mtd/maps/ar7-flash.c 2005-07-22 04:35:26.624453992 +0200 -@@ -0,0 +1,267 @@ -+/* -+ * $Id$ -+ * -+ * Normal mappings of chips in physical memory -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define WINDOW_ADDR CONFIG_MTD_AR7_START -+#define WINDOW_SIZE CONFIG_MTD_AR7_LEN -+#define BUSWIDTH CONFIG_MTD_AR7_BUSWIDTH -+ -+#include -+extern char *prom_getenv(char *name); -+ -+static int create_mtd_partitions(void); -+static void ar7_mtd_cleanup(void); -+ -+#define MAX_NUM_PARTITIONS 5 -+static struct mtd_partition ar7_partinfo[MAX_NUM_PARTITIONS]; -+ -+static struct mtd_info *ar7_mtd_info; -+ -+__u8 ar7_read8(struct map_info *map, unsigned long ofs) -+{ -+ return __raw_readb(map->map_priv_1 + ofs); -+} -+ -+__u16 ar7_read16(struct map_info *map, unsigned long ofs) -+{ -+ return __raw_readw(map->map_priv_1 + ofs); -+} -+ -+__u32 ar7_read32(struct map_info *map, unsigned long ofs) -+{ -+ return __raw_readl(map->map_priv_1 + ofs); -+} -+ -+void ar7_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ memcpy_fromio(to, map->map_priv_1 + from, len); -+} -+ -+void ar7_write8(struct map_info *map, __u8 d, unsigned long adr) -+{ -+ __raw_writeb(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void ar7_write16(struct map_info *map, __u16 d, unsigned long adr) -+{ -+ __raw_writew(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void ar7_write32(struct map_info *map, __u32 d, unsigned long adr) -+{ -+ __raw_writel(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void ar7_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -+{ -+ memcpy_toio(map->map_priv_1 + to, from, len); -+} -+ -+struct map_info ar7_map = { -+ name: "Physically mapped flash", -+ size: WINDOW_SIZE, -+ buswidth: BUSWIDTH, -+ read8: ar7_read8, -+ read16: ar7_read16, -+ read32: ar7_read32, -+ copy_from: ar7_copy_from, -+ write8: ar7_write8, -+ write16: ar7_write16, -+ write32: ar7_write32, -+ copy_to: ar7_copy_to -+}; -+ -+int __init ar7_mtd_init(void) -+{ -+ int partitions; -+ -+ printk(KERN_NOTICE "ar7 flash device: 0x%lx at 0x%lx.\n", (unsigned long)WINDOW_SIZE, (unsigned long)WINDOW_ADDR); -+ ar7_map.map_priv_1 = (unsigned long)ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE); -+ -+ if (!ar7_map.map_priv_1) { -+ printk("Failed to ioremap\n"); -+ return -EIO; -+ } -+ -+ ar7_mtd_info = do_map_probe("cfi_probe", &ar7_map); -+ if (!ar7_mtd_info) -+ { -+ ar7_mtd_cleanup(); -+ return -ENXIO; -+ } -+ -+ ar7_mtd_info->module = THIS_MODULE; -+ -+ if (!(partitions = create_mtd_partitions())) -+ add_mtd_device(ar7_mtd_info); -+ else -+ add_mtd_partitions(ar7_mtd_info, ar7_partinfo, partitions); -+ -+ return 0; -+} -+ -+static char *strdup(char *str) -+{ -+ int n = strlen(str)+1; -+ char *s = kmalloc(n, GFP_KERNEL); -+ if (!s) return NULL; -+ return strcpy(s, str); -+} -+ -+ -+static int create_mtd_partitions(void) -+{ -+ unsigned int offset; -+ unsigned int size; -+ unsigned int found = 0; -+ unsigned int p = 0; -+ unsigned char *flash_base; -+ unsigned char *flash_end; -+ char *env_ptr; -+ char *base_ptr; -+ char *end_ptr; -+ unsigned int adam2_size = 0x20000; -+ unsigned int config_offset = WINDOW_SIZE; -+ unsigned int rootfs_start = 0xe0000; -+ -+ printk("Parsing ADAM2 partition map...\n"); -+ -+ do { -+ char env_name[20]; -+ -+ /* get base and end addresses of flash file system from environment */ -+ sprintf(env_name, "mtd%1u", p); -+ printk("Looking for mtd device :%s:\n", env_name); -+ -+ env_ptr = prom_getenv(env_name); -+ if(env_ptr == NULL) { -+ /* No more partitions to find */ -+ break; -+ } -+ -+ /* Extract the start and stop addresses of the partition */ -+ base_ptr = strtok(env_ptr, ","); -+ end_ptr = strtok(NULL, ","); -+ if ((base_ptr == NULL) || (end_ptr == NULL)) { -+ printk("ADAM2 partition error: Invalid %s start,end.\n", env_name); -+ break; -+ } -+ -+ flash_base = (unsigned char*) simple_strtol(base_ptr, NULL, 0); -+ flash_end = (unsigned char*) simple_strtol(end_ptr, NULL, 0); -+ if((!flash_base) || (!flash_end)) { -+ printk("ADAM2 partition error: Invalid %s start,end.\n", env_name); -+ break; -+ } -+ -+ offset = virt_to_bus(flash_base) - WINDOW_ADDR; -+ size = flash_end - flash_base; -+ printk("Found a %s image (0x%x), with size (0x%x).\n",env_name, offset, size); -+ -+ -+ if (offset == 0) { -+ printk("Assuming adam2 size of 0x%x\n", size); -+ adam2_size = size; // boot loader -+ } else if (offset > 0x120000) { -+ if (config_offset > offset) -+ config_offset = offset; // reserved at the end of the flash chip -+ } else if (offset > 0x30000) { -+ printk("Assuming default rootfs offset of 0x%x\n", offset); -+ rootfs_start = offset; // probably root fs -+ } -+ -+ p++; -+ } while (p < MAX_NUM_PARTITIONS); -+ -+ p = 0; -+ -+ ar7_partinfo[p].name = strdup("adam2"); -+ ar7_partinfo[p].offset = 0; -+ ar7_partinfo[p].size = adam2_size; -+ ar7_partinfo[p++].mask_flags = 0; -+ -+ ar7_partinfo[p].name = strdup("linux"); -+ ar7_partinfo[p].offset = adam2_size; -+ ar7_partinfo[p].size = config_offset - adam2_size; -+ ar7_partinfo[p++].mask_flags = 0; -+ -+ if (ar7_read32(&ar7_map, adam2_size) == 0xfeedfa42) { -+ rootfs_start = ar7_read32(&ar7_map, adam2_size + 4) + adam2_size + 28; -+ printk("Setting new rootfs offset to %08x\n", rootfs_start); -+ } -+ -+ ar7_partinfo[p].name = strdup("rootfs"); -+ ar7_partinfo[p].offset = rootfs_start; -+ ar7_partinfo[p].size = config_offset - rootfs_start; -+ -+ ar7_partinfo[p++].mask_flags = 0; -+ -+ ar7_partinfo[p].name = strdup("config"); -+ ar7_partinfo[p].offset = config_offset; -+ ar7_partinfo[p].size = ar7_mtd_info->size - config_offset; -+ ar7_partinfo[p++].mask_flags = 0; -+ -+ if (ar7_read32(&ar7_map, rootfs_start) == SQUASHFS_MAGIC) { -+ int newsize, newoffset; -+ struct squashfs_super_block sb; -+ -+ ar7_copy_from(&ar7_map, &sb, rootfs_start, sizeof(sb)); -+ printk("Squashfs detected (size = 0x%08x)\n", sb.bytes_used); -+ -+ newoffset = rootfs_start + sb.bytes_used; -+ -+ if ((newoffset % ar7_mtd_info->erasesize) > 0) -+ newoffset += ar7_mtd_info->erasesize - (newoffset % ar7_mtd_info->erasesize); -+ -+ ar7_partinfo[p - 2].size = newoffset - rootfs_start; -+ -+ ar7_partinfo[p].name = strdup("rootfs_data"); -+ ar7_partinfo[p].offset = newoffset; -+ ar7_partinfo[p].size = config_offset - newoffset; -+ ar7_partinfo[p++].mask_flags = 0; -+ } else { -+ printk("Unknown filesystem. Moving rootfs partition to next erase block"); -+ if ((rootfs_start % ar7_mtd_info->erasesize) > 0) { -+ ar7_partinfo[p - 2].offset += ar7_mtd_info->erasesize - (rootfs_start % ar7_mtd_info->erasesize); -+ ar7_partinfo[p - 2].size -= ar7_mtd_info->erasesize - (rootfs_start % ar7_mtd_info->erasesize); -+ } -+ } -+ -+ return p; -+} -+ -+static void ar7_mtd_cleanup(void) -+{ -+ if (ar7_mtd_info) { -+ del_mtd_partitions(ar7_mtd_info); -+ del_mtd_device(ar7_mtd_info); -+ map_destroy(ar7_mtd_info); -+ } -+ -+ if (ar7_map.map_priv_1) { -+ iounmap((void *)ar7_map.map_priv_1); -+ ar7_map.map_priv_1 = 0; -+ } -+} -+ -+module_init(ar7_mtd_init); -+module_exit(ar7_mtd_cleanup); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Felix Fietkau"); -+MODULE_DESCRIPTION("AR7 CFI map driver"); -diff -urN linux.old/drivers/mtd/maps/Config.in linux.dev/drivers/mtd/maps/Config.in ---- linux.old/drivers/mtd/maps/Config.in 2005-07-21 05:36:32.414242296 +0200 -+++ linux.dev/drivers/mtd/maps/Config.in 2005-07-21 06:29:04.067118232 +0200 -@@ -48,6 +48,21 @@ - fi - - if [ "$CONFIG_MIPS" = "y" ]; then -+ if [ "$CONFIG_AR7" = "y" ]; then -+ dep_tristate ' Flash chip mapping on Texas Instruments AR7' CONFIG_MTD_AR7 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS -+ dep_bool ' Use defaults for Texas Instruments AR7' CONFIG_MTD_AR7_DEFAULTS $CONFIG_MTD_AR7 -+ if [ "$CONFIG_MTD_AR7" = "y" -o "$CONFIG_MTD_AR7" = "m" ]; then -+ if [ "$CONFIG_MTD_AR7_DEFAULTS" = "y" ]; then -+ define_hex CONFIG_MTD_AR7_START 0x10000000 -+ define_hex CONFIG_MTD_AR7_LEN 0x400000 -+ define_int CONFIG_MTD_AR7_BUSWIDTH 2 -+ else -+ hex ' Physical start address of flash mapping' CONFIG_MTD_AR7_START 0x10000000 -+ hex ' Physical length of flash mapping' CONFIG_MTD_AR7_LEN 0x400000 -+ int ' Bus width in octets' CONFIG_MTD_AR7_BUSWIDTH 2 -+ fi -+ fi -+ fi - dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000 - dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500 - dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100 -diff -urN linux.old/drivers/mtd/maps/Makefile linux.dev/drivers/mtd/maps/Makefile ---- linux.old/drivers/mtd/maps/Makefile 2005-07-21 05:36:32.414242296 +0200 -+++ linux.dev/drivers/mtd/maps/Makefile 2005-07-21 06:56:33.265401984 +0200 -@@ -10,6 +10,7 @@ - endif - - # Chip mappings -+obj-$(CONFIG_MTD_AR7) += ar7-flash.o - obj-$(CONFIG_MTD_CDB89712) += cdb89712.o - obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o - obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o diff --git a/target/linux/ar7-2.4/patches/002-led_driver.patch b/target/linux/ar7-2.4/patches/002-led_driver.patch deleted file mode 100644 index 81fe153cc3..0000000000 --- a/target/linux/ar7-2.4/patches/002-led_driver.patch +++ /dev/null @@ -1,1915 +0,0 @@ -diff -urN linux.dev/drivers/char/Config.in linux.dev2/drivers/char/Config.in ---- linux.dev/drivers/char/Config.in 2005-10-21 17:02:20.199991500 +0200 -+++ linux.dev2/drivers/char/Config.in 2005-10-21 18:03:44.541778750 +0200 -@@ -133,6 +133,10 @@ - fi - fi - fi -+if [ "$CONFIG_AR7" = "y" ]; then -+ bool 'Enable LED support' CONFIG_AR7_LED -+fi -+ - if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then - tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232 - fi -diff -urN linux.dev/drivers/char/Makefile linux.dev2/drivers/char/Makefile ---- linux.dev/drivers/char/Makefile 2005-10-21 17:02:20.199991500 +0200 -+++ linux.dev2/drivers/char/Makefile 2005-10-21 18:03:44.541778750 +0200 -@@ -190,6 +190,12 @@ - obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP) - endif - -+# -+# Texas Intruments LED driver -+# -+obj-$(CONFIG_AR7_LED) += avalanche_led/avalanche_led.o -+subdir-$(CONFIG_AR7_LED) += avalanche_led -+ - obj-$(CONFIG_HIL) += hp_keyb.o - obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o - obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o -diff -urN linux.dev/drivers/char/avalanche_led/Makefile linux.dev2/drivers/char/avalanche_led/Makefile ---- linux.dev/drivers/char/avalanche_led/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev2/drivers/char/avalanche_led/Makefile 2005-10-21 18:03:44.513777000 +0200 -@@ -0,0 +1,23 @@ -+# File: drivers/char/avalanche_led/Makefile -+# -+# Makefile for the Linux LED device driver. -+# -+ -+ -+O_TARGET := avalanche_led.o -+obj-m := avalanche_led.o -+list-multi := avalanche_led.o -+ -+EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -+ -+export-objs := ledmod.o leds.o -+ -+avalanche_led-objs := ledmod.o gpio.o uartled.o leds.o -+ -+include $(TOPDIR)/Rules.make -+ -+avalanche_led.o: $(avalanche_led-objs) -+ $(LD) -r -o $@ $(avalanche_led-objs) -+ -+clean: -+ rm -f core *.o *.a *.s -diff -urN linux.dev/drivers/char/avalanche_led/gpio.c linux.dev2/drivers/char/avalanche_led/gpio.c ---- linux.dev/drivers/char/avalanche_led/gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev2/drivers/char/avalanche_led/gpio.c 2005-10-21 18:03:44.513777000 +0200 -@@ -0,0 +1,382 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#define TRUE 1 -+#define FALSE 0 -+ -+#if defined CONFIG_AR7WRD || defined CONFIG_AR7RD -+ -+#define AR7_RESET_FILE "led_mod/ar7reset" -+#define AR7_VERSION_FILE "led_mod/hardware_version" -+#define AR7_RESET_GPIO 11 -+#define RESET_POLL_TIME 1 -+#define RESET_HOLD_TIME 4 -+#define NO_OF_LEDS -+ -+static struct proc_dir_entry *reset_file; -+static int res_state = 0; -+static int count; -+static struct timer_list *pTimer = NULL; -+static ssize_t proc_read_reset_fops(struct file *filp, -+ char *buf,size_t count , loff_t *offp); -+ -+static ssize_t proc_read_hwversion_fops(struct file *filp, -+ char *buf,size_t count , loff_t *offp); -+ -+struct file_operations reset_fops = { -+ read: proc_read_reset_fops -+ }; -+struct file_operations hardware_version_fops = { -+ read: proc_read_hwversion_fops -+ }; -+#endif -+ -+static spinlock_t device_lock; -+led_reg_t temp[15]; -+ -+static void gpio_led_on( unsigned long param ) -+{ -+ unsigned int flags; -+ -+ spin_lock_irqsave(&device_lock, flags); -+ -+ tnetd73xx_gpio_out(param,FALSE); -+ spin_unlock_irqrestore(&device_lock, flags); -+} -+ -+static void gpio_led_off ( unsigned long param ) -+{ -+ unsigned int flags = 0x00; -+ -+ spin_lock_irqsave(&device_lock, flags); -+ -+ tnetd73xx_gpio_out(param,TRUE); -+ spin_unlock_irqrestore(&device_lock, flags); -+} -+ -+static void gpio_led_init( unsigned long param) -+{ -+ tnetd73xx_gpio_ctrl(param,GPIO_PIN,GPIO_OUTPUT_PIN); -+} -+ -+static void board_gpio_reset(void) -+{ -+ /* Initialize the link mask */ -+ device_lock = SPIN_LOCK_UNLOCKED; -+ return; -+} -+ -+#if defined CONFIG_AR7WRD || defined CONFIG_AR7RD -+ -+static ssize_t proc_read_hwversion_fops(struct file *filp, char *buf, -+ size_t count, loff_t *offp) -+{ -+ char line[8]; -+ int len = 0; -+ if( *offp != 0 ) -+ return 0; -+ -+ len = sprintf(line, "%d%d.%d%d%d%d\n", tnetd73xx_gpio_in(20), -+ tnetd73xx_gpio_in(21), tnetd73xx_gpio_in(22), -+ tnetd73xx_gpio_in(23), tnetd73xx_gpio_in(24), -+ tnetd73xx_gpio_in(25)); -+ -+ copy_to_user(buf, line, len); -+ *offp = len; -+ return len; -+} -+ -+static ssize_t proc_read_reset_fops(struct file *filp, -+ char *buf,size_t count , loff_t *offp) -+{ -+ char * pdata = NULL; -+ char line[3]; -+ int len = 0; -+ if( *offp != 0 ) -+ return 0; -+ -+ pdata = buf; -+ len = sprintf(line,"%d\n", res_state ); -+//wwzh -+// res_state = 0; -+ copy_to_user(buf,line,len ); -+ *offp = len; -+ return len; -+} -+ -+static void reset_timer_func(unsigned long data) -+{ -+//wwzh -+#if 0 -+ count = (tnetd73xx_gpio_in(AR7_RESET_GPIO) == 0) ? count + 1: 0; -+ if( count >= RESET_HOLD_TIME/RESET_POLL_TIME ) -+#endif -+ if (tnetd73xx_gpio_in(AR7_RESET_GPIO) == 0) -+ res_state = 1; -+ else -+ res_state = 0; -+ pTimer->expires = jiffies + HZ*RESET_POLL_TIME; -+ add_timer (pTimer); -+ return; -+} -+ -+static void hardware_version_init(void) -+{ -+ static struct proc_dir_entry *hardware_version_file; -+ hardware_version_file = create_proc_entry(AR7_VERSION_FILE, 0777, NULL); -+ if(hardware_version_file == NULL) -+ return; -+ -+ hardware_version_file->owner = THIS_MODULE; -+ hardware_version_file->proc_fops = &hardware_version_fops; -+ -+ tnetd73xx_gpio_ctrl(20,GPIO_PIN,GPIO_INPUT_PIN); -+ tnetd73xx_gpio_ctrl(21,GPIO_PIN,GPIO_INPUT_PIN); -+ tnetd73xx_gpio_ctrl(22,GPIO_PIN,GPIO_INPUT_PIN); -+ tnetd73xx_gpio_ctrl(23,GPIO_PIN,GPIO_INPUT_PIN); -+ tnetd73xx_gpio_ctrl(24,GPIO_PIN,GPIO_INPUT_PIN); -+ tnetd73xx_gpio_ctrl(25,GPIO_PIN,GPIO_INPUT_PIN); -+ -+ return; -+} -+ -+static void reset_init(void) -+{ -+ /* Create board reset proc file */ -+ reset_file = create_proc_entry( AR7_RESET_FILE, 0777, NULL); -+ if( reset_file == NULL) -+ goto reset_file; -+ reset_file->owner = THIS_MODULE; -+ reset_file->proc_fops = &reset_fops; -+ -+ /* Initialise GPIO 11 for input */ -+ tnetd73xx_gpio_ctrl(AR7_RESET_GPIO,GPIO_PIN,GPIO_INPUT_PIN); -+ -+ /* Create a timer which fires every seconds */ -+ pTimer = kmalloc(sizeof(struct timer_list),GFP_KERNEL); -+ init_timer( pTimer ); -+ pTimer->function = reset_timer_func; -+ pTimer->data = 0; -+ /* Start the timer */ -+ reset_timer_func(0); -+ return ; -+ -+ reset_file: -+ remove_proc_entry("AR7_RESET_FILE",NULL); -+ return; -+} -+#endif -+/*************wwzh****************/ -+#if 1 -+extern unsigned int sys_mod_state; -+extern unsigned int wan_mod_state; -+extern unsigned int wlan_mod_state; -+void sys_led_init(void) -+{ -+ tnetd73xx_gpio_ctrl(4, GPIO_PIN, GPIO_OUTPUT_PIN); -+ tnetd73xx_gpio_ctrl(5, GPIO_PIN, GPIO_OUTPUT_PIN); -+ tnetd73xx_gpio_ctrl(8, GPIO_PIN, GPIO_OUTPUT_PIN); -+ -+ tnetd73xx_gpio_out(4, FALSE); -+ tnetd73xx_gpio_out(5, TRUE); -+ tnetd73xx_gpio_out(8, TRUE); -+ -+ -+ sys_mod_state = 2; -+ -+} -+void wan_led_init(void) -+{ -+ -+ tnetd73xx_gpio_ctrl(2, GPIO_PIN, GPIO_OUTPUT_PIN); -+ tnetd73xx_gpio_ctrl(3, GPIO_PIN, GPIO_OUTPUT_PIN); -+ -+ tnetd73xx_gpio_out(2, FALSE); -+ tnetd73xx_gpio_out(3, FALSE); -+ -+ wan_mod_state = 1; -+} -+//wwzh wireless -+#if 0 -+void wlan_led_init(void) -+{ -+ //unsigned long i = 0; -+ tnetd73xx_gpio_ctrl(12, GPIO_PIN, GPIO_OUTPUT_PIN); -+ tnetd73xx_gpio_ctrl(13, GPIO_PIN, GPIO_OUTPUT_PIN); -+ -+ tnetd73xx_gpio_out(12, FALSE); -+ tnetd73xx_gpio_out(13, TRUE); -+ //for (i = 0; i < 0x20000000; i++); -+ wlan_mod_state = 1; -+} -+#endif -+ -+#endif -+/*************end ****************/ -+ -+void board_gpio_init(void) -+{ -+ -+ board_gpio_reset(); -+/**************wwzh*************/ -+ sys_led_init(); -+ wan_led_init(); -+ -+ //junzhao 2004.3.15 -+ hardware_version_init(); -+ -+ //wlan_led_init(); -+ -+ /* Register Device MAX_LED_ID + 1 for reset to factory default */ -+ temp[0].param = 0; -+ temp[0].init = reset_init; -+ temp[0].onfunc = 0; -+ temp[0].offfunc = 0; -+ register_led_drv( MAX_LED_ID + 1 , &temp[0]); -+//wwzh for wireless led -+#if 1 -+ /* Register led 12 WiFi 6 */ -+ temp[1].param = 6; -+ temp[1].init = gpio_led_init; -+ temp[1].onfunc = gpio_led_on; -+ temp[1].offfunc = gpio_led_off; -+ register_led_drv( 12 , &temp[1]); -+ -+#endif -+ -+#if 0 -+/**************end ************/ -+#if defined(CONFIG_AR5D01) -+ /* Register led 1 GPIO0 */ -+ temp[0].param = GPIO_0; -+ temp[0].init = gpio_led_init; -+ temp[0].onfunc = gpio_led_on; -+ temp[0].offfunc = gpio_led_off; -+ register_led_drv( 1 , &temp[0]); -+ -+ /* Register led 2 EINT1 */ -+ temp[1].param = EINT_1; -+ temp[1].init = gpio_led_init; -+ temp[1].onfunc = gpio_led_on; -+ temp[1].offfunc = gpio_led_off; -+ register_led_drv( 2 , &temp[1]); -+ -+ /* Register led 5 EINT1 */ -+ temp[2].param = GPIO_1; -+ temp[2].init = gpio_led_init; -+ temp[2].onfunc = gpio_led_on; -+ temp[2].offfunc = gpio_led_off; -+ register_led_drv( 5 , &temp[2]); -+#endif -+ -+#if defined(CONFIG_AR5W01) -+ /* Register led 5 GPIO_1 */ -+ temp[0].param = GPIO_1; -+ temp[0].init = gpio_led_init; -+ temp[0].onfunc = gpio_led_on; -+ temp[0].offfunc = gpio_led_off; -+ register_led_drv( 5 , &temp[0]); -+ -+ /* Register led 7 GPIO_0 */ -+ temp[1].param = GPIO_0; -+ temp[1].init = gpio_led_init; -+ temp[1].onfunc = gpio_led_on; -+ temp[1].offfunc = gpio_led_off; -+ register_led_drv( 7 , &temp[1]); -+#endif -+ -+//wwzh #if defined(CONFIG_AR7RD) -+#if defined CONFIG_AR7WRD || defined CONFIG_AR7RD -+ /* Register led 5 Green PPPOE GPIO 13 */ -+ temp[0].param = 13; -+ temp[0].init = gpio_led_init; -+ temp[0].onfunc = gpio_led_on; -+ temp[0].offfunc = gpio_led_off; -+ register_led_drv( 5 , &temp[0]); -+ -+ /* Register led 7 Green USB GPIO 12 */ -+ temp[1].param = 12; -+ temp[1].init = gpio_led_init; -+ temp[1].onfunc = gpio_led_on; -+ temp[1].offfunc = gpio_led_off; -+ register_led_drv( 7 , &temp[1]); -+ -+ /* Register Device MAX_LED_ID + 1 for reset to factory default */ -+ temp[2].param = 0; -+ temp[2].init = reset_init; -+ temp[2].onfunc = 0; -+ temp[2].offfunc = 0; -+ register_led_drv( MAX_LED_ID + 1 , &temp[2]); -+ -+ /* Register led 8 RED DSL GPIO 10 */ -+ temp[3].param = 10; -+ temp[3].init = gpio_led_init; -+ temp[3].onfunc = gpio_led_on; -+ temp[3].offfunc = gpio_led_off; -+ register_led_drv( 8 , &temp[3]); -+ -+ /* Register led 9 RED PPPoE down GPIO 9 */ -+ temp[4].param = 9; -+ temp[4].init = gpio_led_init; -+ temp[4].onfunc = gpio_led_on; -+ temp[4].offfunc = gpio_led_off; -+ register_led_drv( 9 , &temp[4]); -+ -+ /* Register led 10 DSL down GPIO 8 */ -+ temp[5].param = 8; -+ temp[5].init = gpio_led_init; -+ temp[5].onfunc = gpio_led_on; -+ temp[5].offfunc = gpio_led_off; -+ register_led_drv( 10 , &temp[5]); -+ -+ /* Register led 11 Power GPIO 7 */ -+ temp[6].param = 7; -+ temp[6].init = gpio_led_init; -+ temp[6].onfunc = gpio_led_on; -+ temp[6].offfunc = gpio_led_off; -+ register_led_drv( 11 , &temp[6]); -+ -+ /* Register led 12 WiFi 6 */ -+ temp[7].param = 6; -+ temp[7].init = gpio_led_init; -+ temp[7].onfunc = gpio_led_on; -+ temp[7].offfunc = gpio_led_off; -+ register_led_drv( 12 , &temp[7]); -+ -+ /* Register led 13 ELINK(AA1313) GPIO 15 */ -+ temp[8].param = 15; -+ temp[8].init = gpio_led_init; -+ temp[8].onfunc = gpio_led_on; -+ temp[8].offfunc = gpio_led_off; -+ register_led_drv( 13 , &temp[8]); -+ -+ /* Register led 14 EACT(Y13) GPIO 16 */ -+ temp[9].param = 16; -+ temp[9].init = gpio_led_init; -+ temp[9].onfunc = gpio_led_on; -+ temp[9].offfunc = gpio_led_off; -+ register_led_drv( 14 , &temp[9]); -+ -+#endif -+/**************wwzh**************/ -+#endif -+/**************end **************/ -+ return; -+} -+ -+ -+ -+ -+ -+ -+ -+ -diff -urN linux.dev/drivers/char/avalanche_led/ledmod.c linux.dev2/drivers/char/avalanche_led/ledmod.c ---- linux.dev/drivers/char/avalanche_led/ledmod.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev2/drivers/char/avalanche_led/ledmod.c 2005-10-21 18:03:44.513777000 +0200 -@@ -0,0 +1,1116 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define LED_ON 1 -+#define LED_OFF 2 -+#define LED_BLINK 3 -+#define LED_FLASH 4 -+ -+#define LED_BLINK_UP 5 -+#define LED_BLINK_DOWN 6 -+ -+extern void avalanche_leds_init(void); -+ -+/***********wwzh**************/ -+unsigned int sys_mod_state; -+unsigned int wan_mod_state; -+unsigned int wlan_mod_state; -+ -+struct timer_list *pWanTimer = NULL; -+struct timer_list *pWlanTimer = NULL; -+/***********end **************/ -+ -+typedef struct state_entry{ -+ unsigned char mode; -+ unsigned char led; -+ void (*handler)(struct state_entry *pState); -+ unsigned long param; -+}state_entry_t; -+ -+typedef struct mod_entry{ -+ state_entry_t *states[MAX_STATE_ID]; -+}mod_entry_t; -+ -+static mod_entry_t *modArr[MAX_MOD_ID]; -+static struct proc_dir_entry *led_proc_dir,*led_file; -+ -+/* index of the array is the led number HARDWARE SPECIFIC*/ -+typedef struct led_data{ -+ led_reg_t *led; -+ int state; -+ struct timer_list *pTimer; -+ unsigned char timer_running; -+ unsigned long param; -+}led_data_t; -+ -+led_data_t led_arr[MAX_LED_ID + 1]; -+/*!!! The last device is actually being used for ar7 reset to factory default */ -+ -+ -+static spinlock_t config_lock; -+ -+static void board_led_link_up( state_entry_t *pState ); -+static void board_led_link_down( state_entry_t *pState ); -+static void board_led_activity_on( state_entry_t *pState ); -+static void board_led_activity_off( state_entry_t *pState ); -+static void led_timer_func(unsigned long data); -+ -+extern void board_gpio_init(void); -+extern void uart_led_init(void); -+ -+static ssize_t proc_read_led_fops(struct file *filp, -+ char *buf,size_t count , loff_t *offp); -+static ssize_t proc_write_led_fops(struct file *filp,const char *buffer, -+ size_t count , loff_t *offp); -+static int config_led( unsigned long y); -+ -+struct file_operations led_fops = { -+ read: proc_read_led_fops, -+ write: proc_write_led_fops, -+ }; -+ -+static int led_atoi( char *name) -+{ -+ int val = 0; -+ for(;;name++) -+ { -+ switch(*name) -+ { -+ case '0'...'9': -+ val = val*10+(*name - '0'); -+ break; -+ default: -+ return val; -+ } -+ } -+} -+ -+static int free_memory(void) -+{ -+ int i, j; -+ -+ for( i = 0; i < MAX_MOD_ID ; i++) -+ { -+ if( modArr[i] != NULL ) -+ { -+ for( j = 0; j < MAX_STATE_ID ; j++ ) -+ { -+ if( modArr[i]->states[j] != NULL ) -+ kfree( modArr[i]->states[j]); -+ } -+ kfree(modArr[i]); -+ modArr[i] = NULL; -+ } -+ } -+ return 0; -+} -+ -+static int led_on( state_entry_t *pState ) -+{ -+ if( led_arr[pState->led].led == NULL) -+ return -1; -+ led_arr[pState->led].led->onfunc( led_arr[pState->led].led->param); -+ return 0; -+} -+ -+static int led_off( state_entry_t *pState ) -+{ -+ if( led_arr[pState->led].led == NULL) -+ return -1; -+ led_arr[pState->led].led->offfunc( led_arr[pState->led].led->param); -+ return 0; -+} -+ -+static void board_led_link_up( state_entry_t *pState ) -+{ -+ led_arr[pState->led].state = LED_ON; -+ if( led_arr[pState->led].timer_running == 0 ) -+ led_on(pState); -+ return; -+} -+ -+static void board_led_link_down( state_entry_t *pState ) -+{ -+ led_arr[pState->led].state = LED_OFF; -+ if( led_arr[pState->led].timer_running == 0 ) -+ led_off(pState); -+ return; -+} -+ -+static void add_led_timer(state_entry_t *pState) -+{ -+ led_arr[pState->led].pTimer->expires = jiffies + HZ*(pState->param)/1000; -+ led_arr[pState->led].param = pState->param; -+ led_arr[pState->led].pTimer->data = pState; -+ add_timer (led_arr[pState->led].pTimer); -+} -+ -+static void board_led_activity_on(state_entry_t *pState) -+{ -+ if(led_arr[pState->led].timer_running == 0) -+ { -+ led_on(pState); -+ add_led_timer(pState); -+ led_arr[pState->led].timer_running = 1; -+ led_arr[pState->led].state = LED_BLINK_UP; -+ } -+ else if( led_arr[pState->led].timer_running > 0xF0) -+ { -+ led_arr[pState->led].state = LED_BLINK_UP; -+ led_arr[pState->led].pTimer->expires = jiffies + HZ*(pState->param)/1000; -+ led_arr[pState->led].param = pState->param; -+ led_arr[pState->led].pTimer->data = pState; -+ } -+ return; -+} -+ -+static void board_led_activity_off(state_entry_t *pState) -+{ -+ if(led_arr[pState->led].timer_running == 0) -+ { -+ led_off(pState); -+ add_led_timer(pState); -+ led_arr[pState->led].timer_running = 1; -+ led_arr[pState->led].state = LED_BLINK_UP; -+ } -+ else if( led_arr[pState->led].timer_running > 0xF0) -+ { -+ led_arr[pState->led].state = LED_BLINK_UP; -+ led_arr[pState->led].pTimer->expires = jiffies + HZ*(pState->param)/1000; -+ led_arr[pState->led].param = pState->param; -+ led_arr[pState->led].pTimer->data = pState; -+ } -+ return; -+} -+ -+static void board_led_link_flash(state_entry_t *pState) -+{ -+ if(led_on(pState)) -+ return; -+ if(led_arr[pState->led].timer_running == 0) -+ add_led_timer(pState); -+ else -+ led_arr[pState->led].param = pState->param; -+ led_arr[pState->led].timer_running = 0xFF; -+ led_arr[pState->led].state = LED_FLASH; -+ return; -+} -+ -+static void led_timer_func(unsigned long data) -+{ -+ state_entry_t *pState = NULL; -+ mod_entry_t *pMod = NULL; -+ unsigned int flags; -+ -+ spin_lock_irqsave(&config_lock, flags); -+ -+ pState = (state_entry_t *)data; -+ -+ if( led_arr[pState->led].state == LED_BLINK_DOWN ) -+ { -+ led_arr[pState->led].timer_running = 0; -+ if( pState->mode == 2 ) -+ led_arr[pState->led].state = LED_OFF; -+ else -+ led_arr[pState->led].state = LED_ON; -+ } -+ else if( led_arr[pState->led].state == LED_BLINK_UP ) -+ { -+ led_arr[pState->led].pTimer->expires = jiffies + HZ*(led_arr[pState->led].param)/1000; -+ led_arr[pState->led].pTimer->data = pState; -+ add_timer (led_arr[pState->led].pTimer); -+ if( pState->mode == 2 ) -+ { -+ led_off(pState); -+ led_arr[pState->led].state = LED_BLINK_DOWN; -+ } -+ else -+ { -+ led_on(pState); -+ led_arr[pState->led].state = LED_BLINK_DOWN; -+ } -+ led_arr[pState->led].timer_running = 1; -+ } -+ else if( led_arr[pState->led].state == LED_FLASH ) -+ { -+ led_arr[pState->led].pTimer->expires = jiffies + HZ*(led_arr[pState->led].param)/1000; -+ led_arr[pState->led].pTimer->data = pState; -+ add_timer (led_arr[pState->led].pTimer); -+ -+ if( led_arr[pState->led].timer_running == 0xFF ) -+ { -+ led_off(pState); -+ led_arr[pState->led].timer_running--; -+ } -+ else -+ { -+ led_on(pState); -+ led_arr[pState->led].timer_running++; -+ } -+ spin_unlock_irqrestore(&config_lock, flags); -+ return; -+ } -+ else if(led_arr[pState->led].state == LED_OFF) -+ { -+ led_off(pState); -+ led_arr[pState->led].timer_running = 0; -+ } -+ else if( led_arr[pState->led].state == LED_ON ) -+ { -+ led_on(pState); -+ led_arr[pState->led].timer_running = 0; -+ } -+ spin_unlock_irqrestore(&config_lock, flags); -+ return; -+} -+/************wwzh*****************/ -+#if 0 -+/************end *****************/ -+static ssize_t proc_read_led_fops(struct file *filp, -+ char *buf,size_t count , loff_t *offp) -+{ -+ char * pdata = NULL; -+ int i = 0, j = 0, len = 0, totallen = 0; -+ char line[255]; -+ -+ if( *offp != 0 ) -+ return 0; -+ -+ pdata = buf; -+ len += sprintf(line,"LEDS Registered for use are:"); -+ for( i = 0; i< MAX_LED_ID; i++) -+ if( led_arr[i].led != NULL ) -+ len += sprintf(&line[len]," %d ", i ); -+ line[len++] = '\n'; -+ -+ copy_to_user(pdata, line,len ); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ len = sprintf(line,"USER MODULE INFORMATION:\n"); -+ copy_to_user(pdata, line,len ); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ for( i = 0; i< MAX_MOD_ID; i++) -+ { -+ if( modArr[i] != NULL ) -+ { -+ len = sprintf(line," Module ID = %d \n" , i); -+ copy_to_user(pdata, line,len ); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ for( j = 0; j < MAX_STATE_ID; j++) -+ { -+ if( modArr[i]->states[j] != NULL) -+ { -+ len = sprintf(line , -+ " State = %d , Led = %d," , j , modArr[i]->states[j]->led); -+ copy_to_user(pdata, line,len ); -+ pdata += len; -+ totallen += len; -+ -+ len = 0; -+ switch( modArr[i]->states[j]->mode ) -+ { -+ case 1: -+ len = sprintf(line ," Mode = OFF\n"); -+ break; -+ case 2: -+ len = sprintf(line ," Mode = BLINK_ON , On Time(ms) = %d\n" , -+ (unsigned int)modArr[i]->states[j]->param); -+ break; -+ case 3: -+ len = sprintf(line ," Mode = BLINK_OFF , Off Time(ms) = %d\n" , -+ (unsigned int)modArr[i]->states[j]->param); -+ break; -+ case 4: -+ len = sprintf(line ," Mode = ON \n"); -+ break; -+ case 5: -+ len = sprintf(line ," Mode = FLASH , Time Period(ms) = %d\n" , -+ (unsigned int)modArr[i]->states[j]->param); -+ break; -+ default: -+ break; -+ -+ } -+ copy_to_user(pdata, line,len ); -+ pdata += len; -+ totallen += len; -+ -+ len = 0; -+ } -+ } -+ } -+ } -+ /* Return with configuration information for LEDs */ -+ *offp = totallen; -+ return totallen; -+} -+static ssize_t proc_write_led_fops(struct file *filp,const char *buffer, -+ size_t count , loff_t *offp) -+{ -+ char *pdata = NULL, *ptemp = NULL; -+ char line[10],temp[10]; -+ int i = 0; -+ int mod = 0xFFFF , state = 0xFFFF; -+ int flag = 0; -+ -+ /* Check if this write is for configuring stuff */ -+ if( *(int *)(buffer) == 0xFFEEDDCC ) -+ { -+ printk("<1>proc write:Calling Configuration\n"); -+ config_led((unsigned long)(buffer + sizeof(int)) ); -+ return count; -+ } -+ -+ if( count >= 10) -+ { -+ printk("<1>proc write:Input too long,max length = %d\n",10); -+ return count; -+ } -+ memset( temp, 0x00 , 10); -+ memset( line, 0x00 , 10); -+ copy_from_user(line,buffer,count); -+ line[count] = 0x00; -+ pdata = line; -+ ptemp = temp; -+ while( flag == 0) -+ { -+ if( i > 10 ) -+ break; -+ if( ((*pdata) >= '0' ) && ((*pdata) <= '9') ) -+ { -+ *ptemp = *pdata ; -+ ptemp++; -+ } -+ else if( (*pdata) == ',' ) -+ { -+ *ptemp = 0x00; -+ flag = 1; -+ } -+ pdata++; -+ i++; -+ }; -+ if( flag == 1) -+ mod = led_atoi( temp); -+ else -+ return count; -+ -+ ptemp = temp; -+ *ptemp = 0x00; -+ flag = 0; -+ while( flag == 0) -+ { -+ if( i > 10 ) -+ break; -+ if( ((*pdata) >= '0' ) && ((*pdata) <= '9') ) -+ { -+ *ptemp = *pdata ; -+ ptemp++; -+ } -+ else if( (*pdata) == 0x00 ) -+ { -+ *ptemp = 0x00; -+ flag = 1; -+ } -+ pdata++; -+ i++; -+ }; -+ if( flag == 1) -+ state = led_atoi( temp); -+ else -+ return count; -+ if( (mod == 0xFFFF) || (state == 0xFFFF)) -+ return count; -+ else -+ led_operation( mod , state ); -+ return count; -+} -+ -+/************wwzh*******************/ -+#else -+ -+#define TRUE 1 -+#define FALSE 0 -+#define FLICK_TIME (HZ*100/1000) -+static unsigned int wan_txrx_state = 0; -+static unsigned int wlan_txrx_state = 0; -+ -+void led_operation( int mod , int state) -+{ -+ -+ unsigned int flags; -+ -+ spin_lock_irqsave(&config_lock, flags); -+ -+ if( (mod >= MAX_MOD_ID) || ( state >= MAX_STATE_ID) ) -+ { -+ spin_unlock_irqrestore(&config_lock, flags); -+ return; -+ } -+ if ( modArr[mod] == NULL ) -+ { -+ spin_unlock_irqrestore(&config_lock, flags); -+ return; -+ } -+ if( modArr[mod]->states[state] == NULL ) -+ { -+ spin_unlock_irqrestore(&config_lock, flags); -+ return; -+ } -+ /* Call the function handler */ -+ modArr[mod]->states[state]->handler(modArr[mod]->states[state]); -+ -+ spin_unlock_irqrestore(&config_lock, flags); -+} -+ -+static void wan_led_func(unsigned long data) -+{ -+ if (wan_txrx_state == 0) -+ { -+ tnetd73xx_gpio_out(2, TRUE); -+ tnetd73xx_gpio_out(3, FALSE); -+ wan_txrx_state = 1; -+ } -+ else -+ { -+ tnetd73xx_gpio_out(2, FALSE); -+ tnetd73xx_gpio_out(3, FALSE); -+ wan_txrx_state = 0; -+ } -+ pWanTimer->expires = jiffies + FLICK_TIME; -+ add_timer(pWanTimer); -+} -+//wwzh for wireless -+#if 0 -+static void wlan_led_func(unsigned long data) -+{ -+ if (wlan_txrx_state == 0) -+ { -+ tnetd73xx_gpio_out(12, TRUE); -+ tnetd73xx_gpio_out(13, FALSE); -+ wlan_txrx_state = 1; -+ } -+ else -+ { -+ tnetd73xx_gpio_out(12, FALSE); -+ tnetd73xx_gpio_out(13, FALSE); -+ wlan_txrx_state = 0; -+ -+ } -+ pWlanTimer->expires = jiffies + FLICK_TIME; -+ add_timer(pWlanTimer); -+} -+#endif -+ -+void led_active(int mod, int state) -+{ -+ unsigned int flags = 0; -+ -+//printk("mod = %d state = %d\n", mod, state); -+ spin_lock_irqsave(&config_lock, flags); -+ if ((mod >= 5) || (state >= 5)) -+ { -+ spin_unlock_irqrestore(&config_lock, flags); -+ return; -+ } -+ -+ switch (mod) -+ { -+ case 2: /*system led */ -+ sys_mod_state = state; -+ switch (state) -+ { -+ case 1: -+ break; -+ case 2: /*sys led flashing green */ -+ tnetd73xx_gpio_out(4, FALSE); -+ tnetd73xx_gpio_out(5, TRUE); -+ tnetd73xx_gpio_out(8, TRUE); -+ break; -+ case 3: /*sys led solid green */ -+ tnetd73xx_gpio_out(4, TRUE); -+ tnetd73xx_gpio_out(5, TRUE); -+ tnetd73xx_gpio_out(8, TRUE); -+ -+ break; -+ case 4: /*sys fail red */ -+ tnetd73xx_gpio_out(4, TRUE); -+ tnetd73xx_gpio_out(5, FALSE); -+ tnetd73xx_gpio_out(8, FALSE); -+ break; -+ default: -+ break; -+ } -+ break; -+ case 3: /*wan led */ -+ wan_mod_state = state; -+ switch (state) -+ { -+ case 1: /*no wan interface*/ -+ if (pWanTimer) -+ { -+ del_timer(pWanTimer); -+ kfree(pWanTimer); -+ pWanTimer = NULL; -+ } -+ tnetd73xx_gpio_out(2, FALSE); -+ tnetd73xx_gpio_out(3, FALSE); -+ break; -+ case 2: /*wan connected */ -+ if (pWanTimer) -+ { -+ del_timer(pWanTimer); -+ kfree(pWanTimer); -+ pWanTimer = NULL; -+ } -+ tnetd73xx_gpio_out(2, TRUE); -+ tnetd73xx_gpio_out(3, FALSE); -+ break; -+ case 3: /*rx/tx activity */ -+ if (pWanTimer != NULL) -+ break; -+ -+ pWanTimer = kmalloc(sizeof(struct timer_list), GFP_KERNEL); -+ init_timer(pWanTimer); -+ -+ pWanTimer->function = wan_led_func; -+ pWanTimer->data = 0; -+ pWanTimer->expires = jiffies + FLICK_TIME; -+ tnetd73xx_gpio_out(2, FALSE); -+ tnetd73xx_gpio_out(3, FALSE); -+ wan_txrx_state = 0; -+ add_timer(pWanTimer); -+ -+ break; -+ case 4: /*no ipaddress */ -+ if (pWanTimer) -+ { -+ del_timer(pWanTimer); -+ kfree(pWanTimer); -+ pWanTimer = NULL; -+ } -+ tnetd73xx_gpio_out(2, FALSE); -+ tnetd73xx_gpio_out(3, TRUE); -+ break; -+ default: -+ if (pWanTimer) -+ { -+ del_timer(pWanTimer); -+ kfree(pWanTimer); -+ pWanTimer = NULL; -+ } -+ break; -+ } -+ break; -+ //wwzh for wireless -+ #if 0 -+ case 4: /*wlan led */ -+ wlan_mod_state = state; -+ switch (state) -+ { -+ case 1: /* wlan off */ -+ if (pWlanTimer) -+ { -+ del_timer(pWlanTimer); -+ kfree(pWlanTimer); -+ pWlanTimer = NULL; -+ } -+ tnetd73xx_gpio_out(12, FALSE); -+ tnetd73xx_gpio_out(13, FALSE); -+ break; -+ case 2: /* wlan ready */ -+ if (pWlanTimer) -+ { -+ del_timer(pWlanTimer); -+ kfree(pWlanTimer); -+ pWlanTimer = NULL; -+ } -+ tnetd73xx_gpio_out(12, TRUE); -+ tnetd73xx_gpio_out(13, FALSE); -+ break; -+ case 3: /* wlan rx/tx activity */ -+ if (pWlanTimer != NULL) -+ break; -+ -+ pWlanTimer = kmalloc(sizeof(struct timer_list), GFP_KERNEL); -+ init_timer(pWlanTimer); -+ -+ pWlanTimer->function = wlan_led_func; -+ pWlanTimer->data = 0; -+ pWlanTimer->expires = jiffies + FLICK_TIME; -+ tnetd73xx_gpio_out(12, FALSE); -+ tnetd73xx_gpio_out(13, FALSE); -+ wlan_txrx_state = 0; -+ add_timer(pWlanTimer); -+ -+ break; -+ default: -+ if (pWlanTimer) -+ { -+ del_timer(pWlanTimer); -+ kfree(pWlanTimer); -+ pWlanTimer = NULL; -+ } -+ -+ break; -+ } -+ break; -+ #endif //for wireless -+ default: -+ break; -+ } -+ spin_unlock_irqrestore(&config_lock, flags); -+} -+static ssize_t proc_read_led_fops(struct file *filp, -+ char *buf,size_t count , loff_t *offp) -+{ -+ char *pdata = NULL; -+ int i = 0, j = 0, len = 0, totallen = 0; -+ char line[255]; -+ -+ if (*offp != 0) -+ return 0; -+ pdata = buf; -+ len = sprintf(line, "USER MODULE INFORMATION:\n"); -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ -+ //*******add Module 1 , this Module is ADSL ********/ -+ for (i = 0; i < MAX_MOD_ID; i++) -+ { -+ if (modArr[i] != NULL) -+ { -+ len = sprintf(line, " Module ID = %d\n", i); -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ for(j = 0; j < MAX_STATE_ID; j++) -+ { -+ if (modArr[i]->states[j] != NULL) -+ { -+ len = sprintf(line, "State =%d, Led = %d,", j, modArr[i]->states[j]->led); -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ switch(modArr[i]->states[j]->mode) -+ { -+ case 1: -+ len = sprintf(line, "Mode = OFF\n"); -+ break; -+ case 2: -+ len = sprintf(line, "Mode = BLINK_ON, On Time(ms) = %d\n", (unsigned int)modArr[i]->states[j]->param); -+ break; -+ case 3: -+ len = sprintf(line, "Mode = BLINK_OFF, Off Time(ms) = %d\n", (unsigned int)modArr[i]->states[j]->param); -+ break; -+ case 4: -+ len = sprintf(line, "Mode = On\n"); -+ break; -+ case 5: -+ len = sprintf(line, "Mode = FLASH, Time Period(ms) = %d\n", (unsigned int)modArr[i]->states[j]->param); -+ break; -+ default: -+ break; -+ } -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ } -+ } -+ } -+ -+ } -+ -+ len = sprintf(line, "Module ID = 2(system led)\n"); -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ switch(sys_mod_state) -+ { -+ case 1: -+ len = sprintf(line, "State = OFF\n"); -+ break; -+ case 2: -+ len = sprintf(line, "State = Booting\n"); -+ break; -+ case 3: -+ len = sprintf(line, "State = System Ready\n"); -+ break; -+ case 4: -+ len = sprintf(line, "State = System Failure\n"); -+ break; -+ default: -+ break; -+ } -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ -+ len = sprintf(line, "Module ID = 3(WAN led)\n"); -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ switch(wan_mod_state) -+ { -+ case 1: -+ len = sprintf(line, "State = OFF\n"); -+ break; -+ case 2: -+ len = sprintf(line, "State = Wan Connected\n"); -+ break; -+ case 3: -+ len = sprintf(line, "State = Wan Tx/Rx Activity\n"); -+ break; -+ case 4: -+ len = sprintf(line, "State = Wan Connect Failure\n"); -+ break; -+ default: -+ break; -+ } -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ -+//wwzh for wireless -+#if 0 -+ len = sprintf(line, "Module ID = 4(WLAN led)\n"); -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+ switch(wlan_mod_state) -+ { -+ case 1: -+ len = sprintf(line, "State = OFF\n"); -+ break; -+ case 2: -+ len = sprintf(line, "State = wlan Ready\n"); -+ break; -+ case 3: -+ len = sprintf(line, "State = wlan rx/tx activity\n"); -+ break; -+ default: -+ break; -+ } -+ copy_to_user(pdata, line, len); -+ pdata += len; -+ totallen += len; -+ len = 0; -+#endif //for wireless -+ -+ *offp = totallen; -+ return totallen; -+} -+static ssize_t proc_write_led_fops(struct file *filp,const char *buffer, -+ size_t count , loff_t *offp) -+{ -+ char *pdata = NULL, *ptemp = NULL; -+ char line[10], temp[10]; -+ int i = 0; -+ int mod = 0xffff, state = 0xffff; -+ int flag = 0; -+ -+ /* Check if this write is for configuring ADSL */ -+ if( *(int *)(buffer) == 0xFFEEDDCC ) -+ { -+ printk("<1>proc write:Calling Configuration\n"); -+ config_led((unsigned long)(buffer + sizeof(int)) ); -+ return count; -+ } -+ -+ if (count > 10) -+ { -+ printk("<1> proc write: Input too long, max length = 10\n"); -+ return count; -+ } -+ memset(temp, 0x00, 10); -+ memset(line, 0x00, 10); -+ copy_from_user(line, buffer, count); -+ line[count] = 0x00; -+ pdata = line; -+ ptemp = temp; -+ -+ while (flag == 0) -+ { -+ if (i > 10) -+ break; -+ if (((*pdata) >= '0') && ((*pdata) <= '9')) -+ { -+ *ptemp = *pdata; -+ ptemp++; -+ } -+ else if ((*pdata) == ',') -+ { -+ *ptemp = 0x00; -+ flag = 1; -+ } -+ pdata++; -+ i++; -+ } -+ if (flag == 1) -+ mod = led_atoi(temp); -+ else -+ return count; -+ -+ ptemp = temp; -+ *ptemp = 0x00; -+ flag = 0; -+ -+ while(flag == 0) -+ { -+ if (i > 10) -+ break; -+ if (((*pdata) >= '0') && ((*pdata) <= '9')) -+ { -+ *ptemp = *pdata; -+ ptemp++; -+ } -+ else if ((*pdata) == 0x00) -+ { -+ *ptemp = 0x00; -+ flag = 1; -+ } -+ pdata++; -+ i++; -+ } -+ if (flag == 1) -+ state = led_atoi(temp); -+ else -+ return count; -+ if ((mod == 0xFFFF) || (state == 0xFFFF)) -+ return count; -+ else -+ { -+ if (mod != 4) -+ led_active(mod, state); -+ else -+ led_operation(mod, state); -+ } -+ return 1; -+} -+#endif -+/************end *******************/ -+static int config_led(unsigned long y) -+{ -+ config_elem_t *pcfg = NULL; -+ char *pdata = NULL; -+ int i; -+ int length = 0 , number = 0; -+ unsigned int flags; -+ -+ spin_lock_irqsave(&config_lock, flags); -+ -+ /* ioctl to configure */ -+ length = *((int*)y); -+ pdata = (char *)y + sizeof(int); -+ number = (length - sizeof(int))/sizeof(config_elem_t); -+ pcfg = (config_elem_t *)(pdata); -+ -+ /* Check if an earlier configuration exists IF yes free it up */ -+ free_memory(); -+ -+ for ( i = 0 ; i < number ; i++ ) -+ { -+ /* If no structure has been allocated for the module do so */ -+ if ( modArr[pcfg->name] == NULL ) -+ { -+ printk("<1>module = %d\n",pcfg->name); -+ if( pcfg->name >= MAX_MOD_ID) -+ { -+ printk("<1>Exiting Configuration: Module ID too large %d\n",pcfg->name); -+ free_memory(); -+ spin_unlock_irqrestore(&config_lock, flags); -+ return -1; -+ } -+ modArr[pcfg->name] = kmalloc(sizeof(mod_entry_t),GFP_KERNEL); -+ if(modArr[pcfg->name] == NULL) -+ { -+ printk("<1>Exiting Configuration: Error in allocating memory\n"); -+ free_memory(); -+ spin_unlock_irqrestore(&config_lock, flags); -+ return -1; -+ } -+ memset( modArr[pcfg->name], 0x00, sizeof(mod_entry_t)); -+ } -+ -+ /* if no structure is allocated previously for this state -+ allocate a structure, if it's already there fill it up */ -+ if( modArr[pcfg->name]->states[pcfg->state] == NULL) -+ { -+ printk("<1>STATE = %d\n",pcfg->state); -+ if( pcfg->state >= MAX_STATE_ID) -+ { -+ printk("<1>Exiting Configuration: State ID too large\n"); -+ free_memory(); -+ spin_unlock_irqrestore(&config_lock, flags); -+ return -1; -+ } -+ modArr[pcfg->name]->states[pcfg->state] = -+ kmalloc(sizeof(state_entry_t),GFP_KERNEL); -+ if( modArr[pcfg->name]->states[pcfg->state] == NULL) -+ { -+ free_memory(); -+ spin_unlock_irqrestore(&config_lock, flags); -+ return -1; -+ } -+ memset( modArr[pcfg->name]->states[pcfg->state], 0x00, sizeof(state_entry_t)); -+ } -+ /* Fill up the fields of the state */ -+ if( pcfg->led >= MAX_LED_ID) -+ { -+ printk("<1>led = %d\n",pcfg->led); -+ free_memory(); -+ spin_unlock_irqrestore(&config_lock, flags); -+ return -1; -+ } -+ modArr[pcfg->name]->states[pcfg->state]->led = pcfg->led; -+ modArr[pcfg->name]->states[pcfg->state]->mode = pcfg->mode; -+ modArr[pcfg->name]->states[pcfg->state]->param = pcfg->param; -+ switch(pcfg->mode) -+ { -+ case 1: -+ modArr[pcfg->name]->states[pcfg->state]->handler = board_led_link_down; -+ break; -+ case 2: -+ case 3: -+ case 5: -+ if( pcfg->mode == 2 ) -+ modArr[pcfg->name]->states[pcfg->state]->handler = board_led_activity_on; -+ else if( pcfg->mode == 3) -+ modArr[pcfg->name]->states[pcfg->state]->handler = board_led_activity_off; -+ else -+ modArr[pcfg->name]->states[pcfg->state]->handler = board_led_link_flash; -+ break; -+ case 4: -+ modArr[pcfg->name]->states[pcfg->state]->handler = board_led_link_up; -+ break; -+ default: -+ printk("<1>Exiting Configuration: Unknown LED Mode\n"); -+ free_memory(); -+ spin_unlock_irqrestore(&config_lock, flags); -+ return -1; -+ } -+ pcfg++; -+ } -+ spin_unlock_irqrestore(&config_lock, flags); -+ return 0; -+} -+ -+ -+int __init led_init(void) -+{ -+ -+ /* Clear our memory */ -+ memset(modArr,0x00,sizeof(mod_entry_t *)*MAX_MOD_ID); -+ memset(led_arr,0x00,sizeof(led_data_t *)*MAX_LED_ID); -+ -+ /* Create spin lock for config data structure */ -+ config_lock=SPIN_LOCK_UNLOCKED; -+ -+ /* Create directory */ -+ led_proc_dir = proc_mkdir("led", NULL); -+ if( led_proc_dir == NULL ) -+ goto out; -+ -+ /* Create adsl file */ -+ led_file = create_proc_entry("led", 0777, led_proc_dir); -+ if( led_file == NULL) -+ goto led_file; -+ led_file->owner = THIS_MODULE; -+ led_file->proc_fops = &led_fops; -+ -+ memset( modArr , 0x00 , sizeof(mod_entry_t *) * MAX_MOD_ID); -+ /* Reset the GPIO pins */ -+ board_gpio_init(); -+ -+ /* Register the UART controlled LEDS */ -+ uart_led_init(); -+ /* Create the usb proc file */ -+ avalanche_leds_init(); -+ return 0; -+ -+ led_file: -+ remove_proc_entry("led",led_proc_dir); -+ out: -+ return 0; -+ -+} -+ -+void led_exit() -+{ -+ remove_proc_entry("led", led_proc_dir); -+} -+ -+module_init(led_init); -+module_exit(led_exit); -+ -+void register_led_drv( int device , led_reg_t *pInfo) -+{ -+ unsigned int flags; -+ struct timer_list *pTimer = NULL; -+ -+ spin_lock_irqsave(&config_lock, flags); -+ -+ led_arr[device].led = pInfo; -+ if( led_arr[device].led->init != 0x00) -+ led_arr[device].led->init(led_arr[device].led->param); -+ if( led_arr[device].led->offfunc != 0x00) -+ led_arr[device].led->offfunc(led_arr[device].led->param); -+ -+ /* Create a timer for blinking */ -+ pTimer = kmalloc(sizeof(struct timer_list),GFP_KERNEL); -+ init_timer( pTimer ); -+ pTimer->function = led_timer_func; -+ pTimer->data = 0; -+ led_arr[device].pTimer = pTimer; -+ led_arr[device].timer_running = 0; -+ -+ spin_unlock_irqrestore(&config_lock, flags); -+ -+ return; -+} -+ -+void deregister_led_drv( int device) -+{ -+ unsigned int flags; -+ -+ spin_lock_irqsave(&config_lock, flags); -+ led_arr[device].led = NULL; -+ -+ if( led_arr[device].pTimer != NULL) -+ { -+ del_timer(led_arr[device].pTimer); -+ kfree(led_arr[device].pTimer); -+ } -+ spin_unlock_irqrestore(&config_lock, flags); -+ -+ return; -+} -+ -+EXPORT_SYMBOL_NOVERS(led_operation); -+EXPORT_SYMBOL_NOVERS(register_led_drv); -+EXPORT_SYMBOL_NOVERS(deregister_led_drv); -+ -diff -urN linux.dev/drivers/char/avalanche_led/leds.c linux.dev2/drivers/char/avalanche_led/leds.c ---- linux.dev/drivers/char/avalanche_led/leds.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev2/drivers/char/avalanche_led/leds.c 2005-10-21 18:03:44.513777000 +0200 -@@ -0,0 +1,133 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#if defined(CONFIG_AR5D01) || defined(CONFIG_AR5W01) || defined(CONFIG_AR7) -+ -+#define ETH_MASK 0x01 -+#define USB_MASK 0x02 -+ -+static struct proc_dir_entry *usb_file; -+static ssize_t proc_read_usb_fops(struct file *filp, -+ char *buf,size_t count , loff_t *offp); -+struct file_operations usb_fops = {read: proc_read_usb_fops}; -+ -+typedef struct mod_states{ -+ int module; -+ int activity; -+ int linkup; -+ int idle; -+}mod_states_t; -+ -+mod_states_t state_arr[] = { -+ { MOD_ETH,DEF_ETH_ACTIVITY,DEF_ETH_LINK_UP,DEF_ETH_IDLE }, -+ { MOD_USB,DEF_USB_ACTIVITY,DEF_USB_LINK_UP,DEF_USB_IDLE }, -+ { MOD_LAN,DEF_LAN_ACTIVITY,DEF_LAN_LINK_UP,DEF_LAN_IDLE } -+ }; -+ -+unsigned char device_links = 0; /* Bitmask with the devices that are up */ -+ -+ -+void avalanche_led_activity_pulse(unsigned long device) -+{ -+ /* If device link is not up return */ -+ if( !(device_links & (unsigned char)(1 << device))) -+ return; -+#ifdef MULTIPLEX_LED -+ led_operation( state_arr[2].module, state_arr[2].activity); -+#else -+ led_operation( state_arr[device].module, state_arr[device].activity); -+#endif -+} -+ -+void avalanche_led_link_up( unsigned long device ) -+{ -+ -+ /* If already UP ignore */ -+ if( device_links & (unsigned char)(1 << device)) -+ return; -+ /* Turn on the bit for the device */ -+ device_links |= (unsigned char)(1 << device); -+#ifdef MULTIPLEX_LED -+ led_operation( state_arr[2].module, state_arr[2].linkup); -+#else -+ led_operation( state_arr[device].module, state_arr[device].linkup); -+#endif -+} -+ -+void avalanche_led_link_down ( unsigned long device ) -+{ -+ -+ /* If already DOWN ignore */ -+ if( !(device_links & (unsigned char)(1 << device))) -+ return; -+ -+ /* Turn off the bit for the device */ -+ device_links &= ~(unsigned char)(1 << device); -+#ifdef MULTIPLEX_LED -+ /* If no links, then shut the LED off */ -+ if(!device_links) -+ led_operation( state_arr[2].module, state_arr[2].idle); -+#else -+ led_operation( state_arr[device].module, state_arr[device].idle); -+#endif -+} -+ -+static ssize_t proc_read_usb_fops(struct file *filp, -+ char *buf,size_t count , loff_t *offp) -+{ -+ char * pdata = NULL; -+ char line[3]; -+ if( *offp != 0 ) -+ return 0; -+ pdata = buf; -+ if( device_links & USB_MASK) -+ sprintf(line,"%s\n","1"); -+ else -+ sprintf(line,"%s\n","0"); -+ copy_to_user(pdata,line,2); -+ *offp = 2; -+ return 2; -+} -+ -+ -+void avalanche_leds_init(void) -+{ -+ /* Create usb link proc file */ -+ usb_file = create_proc_entry("avalanche/usb_link", 0444, NULL); -+ if( usb_file == NULL) -+ return; -+ usb_file->owner = THIS_MODULE; -+ usb_file->proc_fops = &usb_fops; -+ return; -+} -+ -+EXPORT_SYMBOL(avalanche_led_activity_pulse); -+EXPORT_SYMBOL(avalanche_led_link_up); -+EXPORT_SYMBOL(avalanche_led_link_down); -+ -+#else -+/* We make a dummy init routine for the platforms that do not support this led -+ API -+*/ -+ -+void avalanche_leds_init(void) -+{ -+} -+ -+#endif -+ -+ -+ -+ -+ -diff -urN linux.dev/drivers/char/avalanche_led/uartled.c linux.dev2/drivers/char/avalanche_led/uartled.c ---- linux.dev/drivers/char/avalanche_led/uartled.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev2/drivers/char/avalanche_led/uartled.c 2005-10-21 18:03:44.529778000 +0200 -@@ -0,0 +1,55 @@ -+#include -+#include -+#include -+#include -+#include -+ -+#define UART_LED_REG (*(volatile unsigned int *)(UARTA_BASE + 0x10)) -+ -+static spinlock_t device_lock; -+led_reg_t temp1[2]; -+ -+static void uart_led_on(unsigned long param) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&device_lock,flags); -+ UART_LED_REG &= 0xFFFD; -+ spin_unlock_irqrestore(&device_lock, flags); -+} -+ -+static void uart_led_off ( unsigned long param ) -+{ -+ unsigned int flags = 0x00; -+ spin_lock_irqsave(&device_lock, flags); -+ UART_LED_REG |= 0x02; -+ spin_unlock_irqrestore(&device_lock, flags); -+} -+ -+void uart_led_init(void) -+{ -+ -+#if defined(CONFIG_AR5D01) -+ /* Register led 6 UART Pin 1 */ -+ temp1[0].param = 0; -+ temp1[0].init = NULL; -+ temp1[0].onfunc = uart_led_on; -+ temp1[0].offfunc = uart_led_off; -+ register_led_drv( 6 , &temp1[0]); -+#endif -+ -+#if defined(CONFIG_AR5W01) -+ /* Register led 8 UART Pin 1 */ -+ temp1[0].param = 0; -+ temp1[0].init = NULL; -+ temp1[0].onfunc = uart_led_on; -+ temp1[0].offfunc = uart_led_off; -+ register_led_drv( 8 , &temp1[0]); -+#endif -+ -+ /* Initialize the link mask */ -+ device_lock = SPIN_LOCK_UNLOCKED; -+ -+ return; -+} -+ -diff -urN linux.dev/include/asm-mips/ar7/led_config.h linux.dev2/include/asm-mips/ar7/led_config.h ---- linux.dev/include/asm-mips/ar7/led_config.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev2/include/asm-mips/ar7/led_config.h 2005-10-21 17:02:25.568327000 +0200 -@@ -0,0 +1,55 @@ -+/****************************************************************************** -+ * FILE PURPOSE: - LED config Header -+ ****************************************************************************** -+ * FILE NAME: led_config.h -+ * -+ * DESCRIPTION: Header file for LED configuration parameters -+ * and data structures -+ * -+ * REVISION HISTORY: -+ * 11 Oct 03 - PSP TII -+ * -+ * (C) Copyright 2002, Texas Instruments, Inc -+ *******************************************************************************/ -+ -+ -+#ifndef __LED_CONFIG__ -+#define __LED_CONFIG__ -+ -+/* LED config parameters */ -+#define MAX_GPIO_PIN_NUM 64 -+#define MAX_GPIOS_PER_STATE 5 -+#define MAX_MODULE_ENTRIES 25 -+#define MAX_MODULE_INSTANCES 4 -+#define MAX_STATE_ENTRIES 25 -+#define MAX_LED_ENTRIES 25 -+ -+ -+/* LED modes */ -+#define LED_OFF 0 -+#define LED_ON 1 -+#define LED_ONESHOT_OFF 2 -+#define LED_ONESHOT_ON 3 -+#define LED_FLASH 4 -+#define LED_BLINK_CODE0 5 /*--- param1: on time, param2: blink nr , (param2 > 100 blink off) ---*/ -+#define LED_BLINK_CODE1 6 -+#define LED_BLINK_CODE2 7 -+ -+#define NUM_LED_MODES 8 -+ -+ -+ -+/* Data structure for LED configuration */ -+typedef struct led_config{ -+ unsigned char name[80]; -+ unsigned int instance; -+ unsigned int state; -+ unsigned int gpio[MAX_GPIOS_PER_STATE]; -+ unsigned int mode[MAX_GPIOS_PER_STATE]; -+ unsigned int gpio_num; -+ unsigned int param1; -+ unsigned int param2; -+}LED_CONFIG_T; -+ -+ -+#endif /* __LED_CONFIG__ */ -diff -urN linux.dev/include/asm-mips/ar7/led_hal.h linux.dev2/include/asm-mips/ar7/led_hal.h ---- linux.dev/include/asm-mips/ar7/led_hal.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev2/include/asm-mips/ar7/led_hal.h 2005-10-21 17:02:25.568327000 +0200 -@@ -0,0 +1,30 @@ -+/****************************************************************************** -+ * FILE PURPOSE: - LED HAL module Header -+ ****************************************************************************** -+ * FILE NAME: led_hal.h -+ * -+ * DESCRIPTION: LED HAL API's. -+ * -+ * REVISION HISTORY: -+ * 11 Oct 03 - PSP TII -+ * -+ * (C) Copyright 2002, Texas Instruments, Inc -+ *******************************************************************************/ -+ -+#ifndef __LED_HAL__ -+#define __LED_HAL__ -+ -+/* Interface prototypes */ -+#include "led_config.h" -+ -+int avalanche_led_hal_init (int *gpio_off_value, int num_gpio_pins); -+int avalanche_led_config_set (LED_CONFIG_T * led_cfg); -+int avalanche_led_config_get (LED_CONFIG_T *led_cfg,int module_id,int instance, int state); -+void *avalanche_led_register (const char *module_name, int instance_num); -+void avalanche_led_action (void *handle, int state_id); -+void avalanche_led_late_actions(void); -+int avalanche_led_unregister (void *handle); -+void avalanche_led_free_all(void); -+void avalanche_led_hal_exit (void); -+ -+#endif /*__LED_HAL__ */ -diff -urN linux.dev/include/asm-mips/ar7/ledapp.h linux.dev2/include/asm-mips/ar7/ledapp.h ---- linux.dev/include/asm-mips/ar7/ledapp.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev2/include/asm-mips/ar7/ledapp.h 2005-10-21 18:03:44.573780750 +0200 -@@ -0,0 +1,59 @@ -+#ifndef __LED_APP__ -+#define __LED_APP__ -+ -+#define CONF_FILE "/etc/led.conf" -+#define LED_PROC_FILE "/proc/led_mod/led" -+ -+#define CONFIG_LED_MODULE -+ -+#define MAX_MOD_ID 25 -+#define MAX_STATE_ID 25 -+#define MAX_LED_ID 25 -+ -+#define MOD_ADSL 1 -+#define DEF_ADSL_IDLE 1 -+#define DEF_ADSL_TRAINING 2 -+#define DEF_ADSL_SYNC 3 -+#define DEF_ADSL_ACTIVITY 4 -+ -+#define MOD_WAN 2 -+#define DEF_WAN_IDLE 1 -+#define DEF_WAN_NEGOTIATE 2 -+#define DEF_WAN_SESSION 3 -+ -+#define MOD_LAN 3 -+#define DEF_LAN_IDLE 1 -+#define DEF_LAN_LINK_UP 2 -+#define DEF_LAN_ACTIVITY 3 -+ -+#define MOD_WLAN 4 -+#define DEF_WLAN_IDLE 1 -+#define DEF_WLAN_LINK_UP 2 -+#define DEF_WLAN_ACTIVITY 3 -+ -+#define MOD_USB 5 -+#define DEF_USB_IDLE 1 -+#define DEF_USB_LINK_UP 2 -+#define DEF_USB_ACTIVITY 3 -+ -+#define MOD_ETH 6 -+#define DEF_ETH_IDLE 1 -+#define DEF_ETH_LINK_UP 2 -+#define DEF_ETH_ACTIVITY 3 -+ -+typedef struct config_elem{ -+ unsigned char name; -+ unsigned char state; -+ unsigned char mode; -+ unsigned char led; -+ int param; -+}config_elem_t; -+ -+typedef struct led_reg{ -+ unsigned int param; -+ void (*init)(unsigned long param); -+ void (*onfunc)(unsigned long param); -+ void (*offfunc)(unsigned long param); -+}led_reg_t; -+ -+#endif diff --git a/target/linux/ar7-2.4/patches/004-atm_driver.patch b/target/linux/ar7-2.4/patches/004-atm_driver.patch deleted file mode 100644 index 9efb62f8c7..0000000000 --- a/target/linux/ar7-2.4/patches/004-atm_driver.patch +++ /dev/null @@ -1,60 +0,0 @@ -diff -urN linux.old/include/linux/atmdev.h linux.dev/include/linux/atmdev.h ---- linux.old/include/linux/atmdev.h 2005-08-22 23:18:37.812526104 +0200 -+++ linux.dev/include/linux/atmdev.h 2005-08-23 06:33:33.425389944 +0200 -@@ -30,6 +30,9 @@ - #define ATM_DS3_PCR (8000*12) - /* DS3: 12 cells in a 125 usec time slot */ - -+#define ATM_PDU_OVHD 0 /* number of bytes to charge against buffer -+ quota per PDU */ -+ - #define ATM_SD(s) ((s)->sk->protinfo.af_atm) - - -@@ -94,7 +97,8 @@ - /* set backend handler */ - #define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) - /* use backend to make new if */ -- -+#define ATM_STOPTX _IOW('a',ATMIOC_SPECIAL+4,struct atmif_sioc) -+ /* Stop Tx on Sangam DSL */ - /* - * These are backend handkers that can be set via the ATM_SETBACKEND call - * above. In the future we may support dynamic loading of these - for now, -@@ -199,7 +203,9 @@ - "SESSION", "HASSAP", "BOUND", "CLOSE" - - --#ifdef __KERNEL__ -+#ifndef __KERNEL__ -+#undef __AAL_STAT_ITEMS -+#else - - #include /* wait_queue_head_t */ - #include /* struct timeval */ -@@ -291,6 +297,7 @@ - int (*send)(struct atm_vcc *vcc,struct sk_buff *skb); - void *dev_data; /* per-device data */ - void *proto_data; /* per-protocol data */ -+ struct timeval timestamp; /* AAL timestamps */ - struct k_atm_aal_stats *stats; /* pointer to AAL stats group */ - wait_queue_head_t sleep; /* if socket is busy */ - struct sock *sk; /* socket backpointer */ -@@ -333,13 +340,14 @@ - struct k_atm_dev_stats stats; /* statistics */ - char signal; /* signal status (ATM_PHY_SIG_*) */ - int link_rate; /* link rate (default: OC3) */ -- atomic_t refcnt; /* reference count */ -- spinlock_t lock; /* protect internal members */ -+ atomic_t refcnt; /* reference count */ -+ spinlock_t lock; /* protect internal members */ - #ifdef CONFIG_PROC_FS - struct proc_dir_entry *proc_entry; /* proc entry */ - char *proc_name; /* proc entry name */ - #endif -- struct list_head dev_list; /* linkage */ -+ struct list_head dev_list; /* linkage */ -+ - }; - - diff --git a/target/linux/ar7-2.4/patches/005-wdt_driver.patch b/target/linux/ar7-2.4/patches/005-wdt_driver.patch deleted file mode 100644 index 9b01a353da..0000000000 --- a/target/linux/ar7-2.4/patches/005-wdt_driver.patch +++ /dev/null @@ -1,392 +0,0 @@ -diff -ruN linux-2.4.30-patch006/drivers/char/ar7_wdt.c linux-2.4.30-patch007/drivers/char/ar7_wdt.c ---- linux-2.4.30-patch006/drivers/char/ar7_wdt.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.30-patch007/drivers/char/ar7_wdt.c 2005-10-27 09:39:40.000000000 +0200 -@@ -0,0 +1,335 @@ -+/* linux/drivers/char/ar7_wdt.c -+ -+ TI AR7 watch dog timer support -+ -+ Copyright (c) 2005 Enrik Berkhan -+ -+ Som code taken from: -+ National Semiconductor SCx200 Watchdog support -+ Copyright (c) 2001,2002 Christer Weinigel -+ -+ This program is free software; you can redistribute it and/or -+ modify it under the terms of the GNU General Public License as -+ published by the Free Software Foundation; either version 2 of the -+ License, or (at your option) any later version. -+ -+ The author(s) of this software shall not be held liable for damages -+ of any nature resulting due to the use of this software. This -+ software is provided AS-IS with no warranties. */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+ -+#define NAME "ar7_wdt" -+#define LONGNAME "TI AR7 Watchdog Timer" -+ -+MODULE_AUTHOR("Enrik Berkhan "); -+MODULE_DESCRIPTION(LONGNAME); -+MODULE_LICENSE("GPL"); -+ -+#ifndef CONFIG_WATCHDOG_NOWAYOUT -+#define CONFIG_WATCHDOG_NOWAYOUT 0 -+#endif -+ -+static int margin = 60; -+MODULE_PARM(margin, "i"); -+MODULE_PARM_DESC(margin, "Watchdog margin in seconds (1 - ~68)"); -+ -+static int nowayout = CONFIG_WATCHDOG_NOWAYOUT; -+MODULE_PARM(nowayout, "i"); -+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); -+ -+typedef struct { -+ uint32_t kick_lock; -+ uint32_t kick; -+ uint32_t change_lock; -+ uint32_t change ; -+ uint32_t disable_lock; -+ uint32_t disable; -+ uint32_t prescale_lock; -+ uint32_t prescale; -+} ar7_wdt_t; -+ -+volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)AVALANCHE_WATCHDOG_TIMER_BASE; -+ -+static struct semaphore open_semaphore; -+static unsigned expect_close; -+ -+/* XXX correct? assumed to be sysfreq/2. get this dynamically ... */ -+#define vbus_freq 62500000 -+ -+/* XXX currently fixed, allows max margin ~68.72 secs */ -+#define prescale_value 0xFFFF -+ -+static void ar7_wdt_kick(uint32_t value) -+{ -+ ar7_wdt->kick_lock = 0x5555; -+ if ((ar7_wdt->kick_lock & 3) == 1) { -+ ar7_wdt->kick_lock = 0xAAAA; -+ if ((ar7_wdt->kick_lock & 3) == 3) { -+ ar7_wdt->kick = value; -+ return; -+ } -+ } -+ printk(KERN_ERR NAME "failed to unlock WDT kick reg\n"); -+} -+ -+static void ar7_wdt_prescale(uint32_t value) -+{ -+ ar7_wdt->prescale_lock = 0x5A5A; -+ if ((ar7_wdt->prescale_lock & 3) == 1) { -+ ar7_wdt->prescale_lock = 0xA5A5; -+ if ((ar7_wdt->prescale_lock & 3) == 3) { -+ ar7_wdt->prescale = value; -+ return; -+ } -+ } -+ printk(KERN_ERR NAME "failed to unlock WDT prescale reg\n"); -+} -+ -+static void ar7_wdt_change(uint32_t value) -+{ -+ ar7_wdt->change_lock = 0x6666; -+ if ((ar7_wdt->change_lock & 3) == 1) { -+ ar7_wdt->change_lock = 0xBBBB; -+ if ((ar7_wdt->change_lock & 3) == 3) { -+ ar7_wdt->change = value; -+ return; -+ } -+ } -+ printk(KERN_ERR NAME "failed to unlock WDT change reg\n"); -+} -+ -+static void ar7_wdt_disable(uint32_t value) -+{ -+ ar7_wdt->disable_lock = 0x7777; -+ if ((ar7_wdt->disable_lock & 3) == 1) { -+ ar7_wdt->disable_lock = 0xCCCC; -+ if ((ar7_wdt->disable_lock & 3) == 2) { -+ ar7_wdt->disable_lock = 0xDDDD; -+ if ((ar7_wdt->disable_lock & 3) == 3) { -+ ar7_wdt->disable = value; -+ return; -+ } -+ } -+ } -+ printk(KERN_ERR NAME "failed to unlock WDT disable reg\n"); -+ return; -+} -+ -+static void ar7_wdt_update_margin(int new_margin) -+{ -+ uint32_t change; -+ -+ change = new_margin * (vbus_freq / prescale_value); -+ if (change < 1) change = 1; -+ if (change > 0xFFFF) change = 0xFFFF; -+ ar7_wdt_change(change); -+ margin = change * prescale_value / vbus_freq; -+ printk(KERN_INFO NAME -+ ": timer margin %d seconds (prescale %d, change %d, freq %d)\n", -+ margin, prescale_value, change, vbus_freq); -+} -+ -+static void ar7_wdt_enable_wdt(void) -+{ -+ printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); -+ ar7_wdt_disable(1); -+ ar7_wdt_kick(1); -+} -+ -+static void ar7_wdt_disable_wdt(void) -+{ -+ printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); -+ ar7_wdt_disable(0); -+} -+ -+static int ar7_wdt_open(struct inode *inode, struct file *file) -+{ -+ /* only allow one at a time */ -+ if (down_trylock(&open_semaphore)) -+ return -EBUSY; -+ ar7_wdt_enable_wdt(); -+ expect_close = 0; -+ -+ return 0; -+} -+ -+static int ar7_wdt_release(struct inode *inode, struct file *file) -+{ -+ if (!expect_close) { -+ printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n"); -+ } else if (!nowayout) { -+ ar7_wdt_disable_wdt(); -+ } -+ up(&open_semaphore); -+ -+ return 0; -+} -+ -+static int ar7_wdt_notify_sys(struct notifier_block *this, -+ unsigned long code, void *unused) -+{ -+ if (code == SYS_HALT || code == SYS_POWER_OFF) -+ if (!nowayout) -+ ar7_wdt_disable_wdt(); -+ -+ return NOTIFY_DONE; -+} -+ -+static struct notifier_block ar7_wdt_notifier = -+{ -+ .notifier_call = ar7_wdt_notify_sys -+}; -+ -+static ssize_t ar7_wdt_write(struct file *file, const char *data, -+ size_t len, loff_t *ppos) -+{ -+ if (ppos != &file->f_pos) -+ return -ESPIPE; -+ -+ /* check for a magic close character */ -+ if (len) -+ { -+ size_t i; -+ -+ ar7_wdt_kick(1); -+ -+ expect_close = 0; -+ for (i = 0; i < len; ++i) { -+ char c; -+ if (get_user(c, data+i)) -+ return -EFAULT; -+ if (c == 'V') -+ expect_close = 1; -+ } -+ -+ } -+ return len; -+} -+ -+static int ar7_wdt_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ static struct watchdog_info ident = { -+ .identity = LONGNAME, -+ .firmware_version = 1, -+ .options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING), -+ }; -+ int new_margin; -+ -+ switch (cmd) { -+ default: -+ return -ENOTTY; -+ case WDIOC_GETSUPPORT: -+ if(copy_to_user((struct watchdog_info *)arg, &ident, -+ sizeof(ident))) -+ return -EFAULT; -+ return 0; -+ case WDIOC_GETSTATUS: -+ case WDIOC_GETBOOTSTATUS: -+ if (put_user(0, (int *)arg)) -+ return -EFAULT; -+ return 0; -+ case WDIOC_KEEPALIVE: -+ ar7_wdt_kick(1); -+ return 0; -+ case WDIOC_SETTIMEOUT: -+ if (get_user(new_margin, (int *)arg)) -+ return -EFAULT; -+ if (new_margin < 1) -+ return -EINVAL; -+ -+ ar7_wdt_update_margin(new_margin); -+ ar7_wdt_kick(1); -+ -+ case WDIOC_GETTIMEOUT: -+ if (put_user(margin, (int *)arg)) -+ return -EFAULT; -+ return 0; -+ } -+} -+ -+static struct file_operations ar7_wdt_fops = { -+ .owner = THIS_MODULE, -+ .write = ar7_wdt_write, -+ .ioctl = ar7_wdt_ioctl, -+ .open = ar7_wdt_open, -+ .release = ar7_wdt_release, -+}; -+ -+static struct miscdevice ar7_wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &ar7_wdt_fops, -+}; -+ -+static __initdata char *last_initiator[] = { -+ [HARDWARE_RESET] = "hardware reset", -+ [SOFTWARE_RESET0] = "SW0 software reset", -+ [SOFTWARE_RESET1] = "SW1 software reset", -+ [WATCHDOG_RESET] = "watchdog" -+}; -+ -+static int __init ar7_wdt_init(void) -+{ -+ int r; -+ -+ if (!request_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE, -+ sizeof(ar7_wdt_t), LONGNAME)) { -+ printk(KERN_WARNING NAME ": watchdog I/O region busy\n"); -+ return -EBUSY; -+ } -+ -+ printk(KERN_INFO NAME ": last system reset initiated by %s\n", -+ last_initiator[avalanche_get_sys_last_reset_status()]); -+ -+ -+ ar7_wdt_disable_wdt(); -+ ar7_wdt_prescale(prescale_value); -+ ar7_wdt_update_margin(margin); -+ -+ sema_init(&open_semaphore, 1); -+ -+ r = misc_register(&ar7_wdt_miscdev); -+ if (r) { -+ printk(KERN_ERR NAME ": unable to register misc device\n"); -+ release_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE, -+ sizeof(ar7_wdt_t)); -+ return r; -+ } -+ -+ r = register_reboot_notifier(&ar7_wdt_notifier); -+ if (r) { -+ printk(KERN_ERR NAME ": unable to register reboot notifier\n"); -+ misc_deregister(&ar7_wdt_miscdev); -+ release_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE, -+ sizeof(ar7_wdt_t)); -+ return r; -+ } -+ -+ return 0; -+} -+ -+static void __exit ar7_wdt_cleanup(void) -+{ -+ unregister_reboot_notifier(&ar7_wdt_notifier); -+ misc_deregister(&ar7_wdt_miscdev); -+ release_mem_region(AVALANCHE_WATCHDOG_TIMER_BASE, sizeof(ar7_wdt_t)); -+} -+ -+module_init(ar7_wdt_init); -+module_exit(ar7_wdt_cleanup); -diff -ruN linux-2.4.30-patch006/drivers/char/Config.in linux-2.4.30-patch007/drivers/char/Config.in ---- linux-2.4.30-patch006/drivers/char/Config.in 2005-10-27 11:25:29.000000000 +0200 -+++ linux-2.4.30-patch007/drivers/char/Config.in 2005-10-27 11:17:32.000000000 +0200 -@@ -251,6 +251,9 @@ - bool 'Watchdog Timer Support' CONFIG_WATCHDOG - if [ "$CONFIG_WATCHDOG" != "n" ]; then - bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT -+ if [ "$CONFIG_AR7" = "y" ] ; then -+ tristate ' TI AR7 Watchdog Timer' CONFIG_AR7_WDT -+ else - tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT - tristate ' Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT - tristate ' ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT -@@ -271,7 +274,6 @@ - tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT - dep_tristate ' SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL - tristate ' NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT -- tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG - tristate ' W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT - tristate ' WDT Watchdog timer' CONFIG_WDT - tristate ' WDT PCI Watchdog timer' CONFIG_WDTPCI -@@ -282,6 +284,8 @@ - fi - fi - tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT -+ fi -+ tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG - if [ "$CONFIG_SGI_IP22" = "y" ]; then - dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22 - fi -diff -ruN linux-2.4.30-patch006/drivers/char/Makefile linux-2.4.30-patch007/drivers/char/Makefile ---- linux-2.4.30-patch006/drivers/char/Makefile 2005-10-27 11:19:38.000000000 +0200 -+++ linux-2.4.30-patch007/drivers/char/Makefile 2005-10-27 09:39:40.000000000 +0200 -@@ -342,6 +342,7 @@ - obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o - obj-$(CONFIG_INDYDOG) += indydog.o - obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o -+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - - subdir-$(CONFIG_MWAVE) += mwave - ifeq ($(CONFIG_MWAVE),y) -diff -ruN linux-2.4.30-patch006/include/asm-mips/ar7/sangam.h linux-2.4.30-patch007/include/asm-mips/ar7/sangam.h ---- linux-2.4.30-patch006/include/asm-mips/ar7/sangam.h 2005-10-27 11:25:51.000000000 +0200 -+++ linux-2.4.30-patch007/include/asm-mips/ar7/sangam.h 2005-10-27 11:13:37.000000000 +0200 -@@ -152,7 +152,7 @@ - #define AVALANCHE_EMIF_SDRAM_CFG (AVALANCHE_EMIF_CONTROL_BASE + 0x8) - #define AVALANCHE_RST_CTRL_PRCR (KSEG1ADDR(0x08611600)) - #define AVALANCHE_RST_CTRL_SWRCR (KSEG1ADDR(0x08611604)) --#define AVALANCHE_RST_CTRL_RSR (KSEG1ADDR(0x08611600)) -+#define AVALANCHE_RST_CTRL_RSR (KSEG1ADDR(0x08611608)) - - #define AVALANCHE_POWER_CTRL_PDCR (KSEG1ADDR(0x08610A00)) - #define AVALANCHE_WAKEUP_CTRL_WKCR (KSEG1ADDR(0x08610A0C)) diff --git a/target/linux/ar7-2.4/profiles/AnnexA.mk b/target/linux/ar7-2.4/profiles/AnnexA.mk deleted file mode 100644 index 10847d38bf..0000000000 --- a/target/linux/ar7-2.4/profiles/AnnexA.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/AnnexA - NAME:=ADSL Annex A (default) - PACKAGES:=kmod-sangam-atm-annex-a ppp-mod-pppoa -endef -$(eval $(call Profile,AnnexA)) - diff --git a/target/linux/ar7-2.4/profiles/AnnexB.mk b/target/linux/ar7-2.4/profiles/AnnexB.mk deleted file mode 100644 index b4eb807eb3..0000000000 --- a/target/linux/ar7-2.4/profiles/AnnexB.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/AnnexB - NAME:=ADSL Annex B - PACKAGES:=kmod-sangam-atm-annex-b ppp-mod-pppoa -endef -$(eval $(call Profile,AnnexB)) - diff --git a/target/linux/ar7-2.4/profiles/None.mk b/target/linux/ar7-2.4/profiles/None.mk deleted file mode 100644 index 336cc4ce0c..0000000000 --- a/target/linux/ar7-2.4/profiles/None.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/None - NAME:=No ADSL - PACKAGES:= -endef -$(eval $(call Profile,None)) - diff --git a/target/linux/ar7-2.4/src/adam2patcher.c b/target/linux/ar7-2.4/src/adam2patcher.c deleted file mode 100644 index 25a78074a6..0000000000 --- a/target/linux/ar7-2.4/src/adam2patcher.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * patcher.c - ADAM2 patcher for Netgear DG834 (and compatible) - * - * Copyright (C) 2006 Felix Fietkau - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -int main(int argc, char **argv) -{ - int fd; - char *ptr; - uint32_t *i; - - if (argc != 2) { - fprintf(stderr, "Usage: %s \n", argv[0]); - exit(1); - } - - if (((fd = open(argv[1], O_RDWR)) < 0) - || ((ptr = mmap(0, 128 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))) { - fprintf(stderr, "Can't open file\n"); - exit(1); - } - - i = (uint32_t *) &ptr[0x3944]; - if (*i == 0x0c000944) { - fprintf(stderr, "Unpatched ADAM2 detected. Patching... "); - *i = 0x00000000; - msync(i, sizeof(*i), MS_SYNC|MS_INVALIDATE); - fprintf(stderr, "done!\n"); - } else if (*i == 0x00000000) { - fprintf(stderr, "Patched ADAM2 detected.\n"); - } else { - fprintf(stderr, "Unknown ADAM2 detected. Can't patch!\n"); - } - - close(fd); -} -- 2.25.1