From f0a2c7b4b64eacd06bb272856bcc056be8719f5a Mon Sep 17 00:00:00 2001 From: Ilko Iliev Date: Thu, 16 Apr 2009 21:30:48 +0200 Subject: [PATCH] at91: add support for the PM9263 board of Ronetix GmbH The PM9263 board is based on the AT91SAM9263-EK board. Here is the page on Ronetix website: http://www.ronetix.at/starter_kit_9263.html Signed-off-by: Ilko Iliev Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 4 + board/ronetix/pm9263/Makefile | 61 +++ board/ronetix/pm9263/config.mk | 1 + board/ronetix/pm9263/led.c | 43 ++ board/ronetix/pm9263/lowlevel_init.S | 279 ++++++++++++ board/ronetix/pm9263/partition.c | 47 ++ board/ronetix/pm9263/pm9263.c | 413 ++++++++++++++++++ cpu/arm926ejs/at91/Makefile | 5 +- cpu/arm926ejs/at91/config.mk | 2 +- cpu/arm926ejs/at91/lowlevel_init.S | 2 + .../at91/{u-boot.lds => u-boot.lds.S} | 9 +- include/asm-arm/arch-at91/at91sam9263.h | 1 + include/asm-arm/arch-at91/at91sam9_sdramc.h | 87 ++++ include/asm-arm/arch-at91/hardware.h | 17 + include/configs/pm9263.h | 367 ++++++++++++++++ tools/Makefile | 3 + tools/logos/ronetix.bmp | Bin 0 -> 5638 bytes 19 files changed, 1342 insertions(+), 4 deletions(-) create mode 100644 board/ronetix/pm9263/Makefile create mode 100644 board/ronetix/pm9263/config.mk create mode 100644 board/ronetix/pm9263/led.c create mode 100644 board/ronetix/pm9263/lowlevel_init.S create mode 100644 board/ronetix/pm9263/partition.c create mode 100644 board/ronetix/pm9263/pm9263.c rename cpu/arm926ejs/at91/{u-boot.lds => u-boot.lds.S} (90%) create mode 100644 include/asm-arm/arch-at91/at91sam9_sdramc.h create mode 100644 include/configs/pm9263.h create mode 100644 tools/logos/ronetix.bmp diff --git a/MAINTAINERS b/MAINTAINERS index 03d59b9317..6bb03b49c0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -204,6 +204,10 @@ Klaus Heydeck KUP4K MPC855 KUP4X MPC859 +Ilko Iliev + + PM9263 AT91SAM9263 + Gary Jennejohn quad100hd PPC405EP diff --git a/MAKEALL b/MAKEALL index e4eb42b60e..f13c81aab6 100755 --- a/MAKEALL +++ b/MAKEALL @@ -582,6 +582,7 @@ LIST_at91=" \ kb9202 \ mp2usb \ m501sk \ + pm9263 \ " ######################################################################### diff --git a/Makefile b/Makefile index e91c051f5e..c52894ce3c 100644 --- a/Makefile +++ b/Makefile @@ -2749,6 +2749,9 @@ at91sam9rlek_config : unconfig fi; @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 +pm9263_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 + ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. integratorap_config \ @@ -3520,6 +3523,7 @@ clean: $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ $(obj)board/bf5{18f,26,27,33,38f,48,61}-ez{brd,kit}/u-boot.lds \ $(obj)board/bf5{33,37}-stamp/u-boot.lds \ + $(obj)cpu/arm926ejs/at91/u-boot.lds \ $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} diff --git a/board/ronetix/pm9263/Makefile b/board/ronetix/pm9263/Makefile new file mode 100644 index 0000000000..270abd801f --- /dev/null +++ b/board/ronetix/pm9263/Makefile @@ -0,0 +1,61 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop +# Lead Tech Design +# Ilko Iliev +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += pm9263.o +COBJS-y += led.o +COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o + +ifndef CONFIG_SKIP_LOWLEVEL_INIT +SOBJS-y := lowlevel_init.o +endif + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ronetix/pm9263/config.mk b/board/ronetix/pm9263/config.mk new file mode 100644 index 0000000000..ff2cfd170b --- /dev/null +++ b/board/ronetix/pm9263/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c new file mode 100644 index 0000000000..fe1a1d2001 --- /dev/null +++ b/board/ronetix/pm9263/led.c @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * Ilko Iliev + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +void coloured_LED_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | + 1 << AT91SAM9263_ID_PIOCDE); + + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); +} diff --git a/board/ronetix/pm9263/lowlevel_init.S b/board/ronetix/pm9263/lowlevel_init.S new file mode 100644 index 0000000000..c048c91096 --- /dev/null +++ b/board/ronetix/pm9263/lowlevel_init.S @@ -0,0 +1,279 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +_TEXT_BASE: + .word TEXT_BASE + +.globl lowlevel_init +.type lowlevel_init,function +lowlevel_init: + + mov r5, pc /* r5 = POS1 + 4 current */ +POS1: + ldr r0, =POS1 /* r0 = POS1 compile */ + ldr r2, _TEXT_BASE + sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */ + sub r5, r5, r0 /* r0 = TEXT_BASE-1 */ + sub r5, r5, #4 /* r1 = text base - current */ + + /* memory control configuration 1 */ + ldr r0, =SMRDATA + ldr r2, =SMRDATA1 + ldr r1, _TEXT_BASE + sub r0, r0, r1 + sub r2, r2, r1 + add r0, r0, r5 + add r2, r2, r5 +0: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 0b + +/* ---------------------------------------------------------------------------- + * PMC Init Step 1. + * ---------------------------------------------------------------------------- + * - Check if the PLL is already initialized + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR) + ldr r0, [r1] + and r0, r0, #3 + cmp r0, #0 + bne PLL_setup_end + +/* --------------------------------------------------------------------------- + * - Enable the Main Oscillator + * --------------------------------------------------------------------------- + */ + ldr r1, =(AT91_BASE_SYS + AT91_CKGR_MOR) + ldr r2, =(AT91_BASE_SYS + AT91_PMC_SR) + ldr r0, =0x0000FF01 + str r0, [r1] /* Enable main oscillator, OSCOUNT = 0xFF */ + + /* Reading the PMC Status to detect when the Main Oscillator is enabled */ + mov r4, #AT91_PMC_MOSCS +MOSCS_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_MOSCS + bne MOSCS_Loop + +/* ---------------------------------------------------------------------------- + * PMC Init Step 2. + * ---------------------------------------------------------------------------- + * Setup PLLA + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_BASE_SYS + AT91_CKGR_PLLAR) + ldr r0, =CONFIG_SYS_PLLAR_VAL + str r0, [r1] + + /* Reading the PMC Status register to detect when the PLLA is locked */ + mov r4, #AT91_PMC_LOCKA +MOSCS_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_LOCKA + bne MOSCS_Loop1 + +/* ---------------------------------------------------------------------------- + * PMC Init Step 3. + * ---------------------------------------------------------------------------- + * - Switch on the Main Oscillator 18.432 MHz + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR) + + /* -Master Clock Controller register PMC_MCKR */ + ldr r0, =CONFIG_SYS_MCKR1_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_MCKRDY +MCKRDY_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_MCKRDY + bne MCKRDY_Loop + + ldr r0, =CONFIG_SYS_MCKR2_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_MCKRDY +MCKRDY_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_MCKRDY + bne MCKRDY_Loop1 + +PLL_setup_end: + +/* ---------------------------------------------------------------------------- + * - memory control configuration 2 + * ---------------------------------------------------------------------------- + */ + ldr r0, =(AT91_BASE_SYS + AT91_SDRAMC_TR) + ldr r1, [r0] + cmp r1, #0 + bne SDRAM_setup_end + + ldr r0, =SMRDATA1 + ldr r2, =SMRDATA2 + ldr r1, _TEXT_BASE + sub r0, r0, r1 + sub r2, r2, r1 + add r0, r0, r5 + add r2, r2, r5 + +2: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 2b + +SDRAM_setup_end: + /* everything is fine now */ + mov pc, lr + + .ltorg + +SMRDATA: + .word (AT91_BASE_SYS + AT91_WDT_MR) + .word CONFIG_SYS_WDTC_WDMR_VAL + + .word (AT91_BASE_SYS + AT91_PIOD + PIO_PDR) + .word CONFIG_SYS_PIOD_PDR_VAL1 + .word (AT91_BASE_SYS + AT91_PIOD + PIO_PUDR) + .word CONFIG_SYS_PIOD_PPUDR_VAL + .word (AT91_BASE_SYS + AT91_PIOD + PIO_ASR) + .word CONFIG_SYS_PIOD_PPUDR_VAL + + .word (AT91_BASE_SYS + AT91_MATRIX_EBI0CSA) + .word CONFIG_SYS_MATRIX_EBI0CSA_VAL + .word (AT91_BASE_SYS + AT91_MATRIX_EBI1CSA) + .word CONFIG_SYS_MATRIX_EBI1CSA_VAL + + /* flash */ + .word (AT91_BASE_SYS + AT91_SMC_MODE(0)) + .word CONFIG_SYS_SMC0_CTRL0_VAL + + .word (AT91_BASE_SYS + AT91_SMC_CYCLE(0)) + .word CONFIG_SYS_SMC0_CYCLE0_VAL + + .word (AT91_BASE_SYS + AT91_SMC_PULSE(0)) + .word CONFIG_SYS_SMC0_PULSE0_VAL + + .word (AT91_BASE_SYS + AT91_SMC_SETUP(0)) + .word CONFIG_SYS_SMC0_SETUP0_VAL + + /* PSRAM */ + .word (AT91_BASE_SYS + AT91_SMC1_MODE(0)) + .word CONFIG_SYS_SMC1_CTRL0_VAL + + .word (AT91_BASE_SYS + AT91_SMC1_CYCLE(0)) + .word CONFIG_SYS_SMC1_CYCLE0_VAL + + .word (AT91_BASE_SYS + AT91_SMC1_PULSE(0)) + .word CONFIG_SYS_SMC1_PULSE0_VAL + + .word (AT91_BASE_SYS + AT91_SMC1_SETUP(0)) + .word CONFIG_SYS_SMC1_SETUP0_VAL + +SMRDATA1: + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL1 + .word (AT91_BASE_SYS + AT91_SDRAMC_TR) + .word CONFIG_SYS_SDRC_TR_VAL1 + .word (AT91_BASE_SYS + AT91_SDRAMC_CR) + .word CONFIG_SYS_SDRC_CR_VAL + .word (AT91_BASE_SYS + AT91_SDRAMC_MDR) + .word CONFIG_SYS_SDRC_MDR_VAL + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL2 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL1 + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL3 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL2 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL3 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL4 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL5 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL6 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL7 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL8 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL9 + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL4 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL10 + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL5 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL11 + .word (AT91_BASE_SYS + AT91_SDRAMC_TR) + .word CONFIG_SYS_SDRC_TR_VAL2 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL12 + /* User reset enable*/ + .word (AT91_BASE_SYS + AT91_RSTC_MR) + .word CONFIG_SYS_RSTC_RMR_VAL +#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP + /* MATRIX_MCFG - REMAP all masters */ + .word (AT91_BASE_SYS + AT91_MATRIX_MCFG0) + .word 0x1FF +#endif + +SMRDATA2: + .word 0 diff --git a/board/ronetix/pm9263/partition.c b/board/ronetix/pm9263/partition.c new file mode 100644 index 0000000000..95ac398efc --- /dev/null +++ b/board/ronetix/pm9263/partition.c @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2008 + * Ulf Samuelsson + * Ilko Iliev + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include +#include +#include +#include + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ +}; + +/*define the area offsets*/ +#ifdef CONFIG_SYS_USE_DATAFLASH +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, + {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, + {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, +}; +#else +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, ""}, +}; + +#endif diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c new file mode 100644 index 0000000000..d24ef9a76e --- /dev/null +++ b/board/ronetix/pm9263/pm9263.c @@ -0,0 +1,413 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include +#endif +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +#ifdef CONFIG_CMD_NAND +static void pm9263_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + at91_sys_write(AT91_MATRIX_EBI0CSA, + csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(1) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(1)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(2)); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} +#endif + +#ifdef CONFIG_MACB +static void pm9263_macb_hw_init(void) +{ + /* + * PB27 enables the 50MHz oscillator for Ethernet PHY + * 1 - enable + * 0 - disable + */ + at91_set_gpio_output(AT91_PIN_PB27, 1); + at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC); + + /* + * Disable pull-up on: + * RXDV (PC25) => PHY normal mode (not Test mode) + * ERX0 (PE25) => PHY ADDR0 + * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PC25), + pin_to_controller(AT91_PIN_PC0) + PIO_PUDR); + writel(pin_to_mask(AT91_PIN_PE25) | + pin_to_mask(AT91_PIN_PE26), + pin_to_controller(AT91_PIN_PE0) + PIO_PUDR); + + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PC25), + pin_to_controller(AT91_PIN_PC0) + PIO_PUER); + writel(pin_to_mask(AT91_PIN_PE25) | + pin_to_mask(AT91_PIN_PE26), + pin_to_controller(AT91_PIN_PE0) + PIO_PUER); + + at91_macb_hw_init(); +} +#endif + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + vl_col: 240, + vl_row: 320, + vl_clk: 4965000, + vl_sync: ATMEL_LCDC_INVLINE_INVERTED | + ATMEL_LCDC_INVFRAME_INVERTED, + vl_bpix: 3, + vl_tft: 1, + vl_hsync_len: 5, + vl_left_margin: 1, + vl_right_margin:33, + vl_vsync_len: 1, + vl_upper_margin:1, + vl_lower_margin:0, + mmio: AT91SAM9263_LCDC_BASE, +}; + +void lcd_enable(void) +{ + at91_set_gpio_value(AT91_PIN_PA22, 1); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */ +} + +#ifdef CONFIG_LCD_IN_PSRAM + +#define PSRAM_CRE_PIN AT91_PIN_PB29 +#define PSRAM_CTRL_REG (PHYS_PSRAM + PHYS_PSRAM_SIZE - 2) + +/* Initialize the PSRAM memory */ +static int pm9263_lcd_hw_psram_init(void) +{ + volatile uint16_t x; + + /* setup PB29 as output */ + at91_set_gpio_output(PSRAM_CRE_PIN, 1); + + at91_set_gpio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */ + + /* PSRAM: write BCR */ + x = readw(PSRAM_CTRL_REG); + x = readw(PSRAM_CTRL_REG); + writew(1, PSRAM_CTRL_REG); /* 0 - RCR,1 - BCR */ + writew(0x9d4f, PSRAM_CTRL_REG); /* write the BCR */ + + /* write RCR of the PSRAM */ + x = readw(PSRAM_CTRL_REG); + x = readw(PSRAM_CTRL_REG); + writew(0, PSRAM_CTRL_REG); /* 0 - RCR,1 - BCR */ + /* set RCR; 0x10-async mode,0x90-page mode */ + writew(0x90, PSRAM_CTRL_REG); + + /* + * test to see if the PSRAM is MT45W2M16A or MT45W2M16B + * MT45W2M16B - CRE must be 0 + * MT45W2M16A - CRE must be 1 + */ + writew(0x1234, PHYS_PSRAM); + writew(0x5678, PHYS_PSRAM + 2); + + /* test if the chip is MT45W2M16B */ + if ((readw(PHYS_PSRAM) != 0x1234) || (readw(PHYS_PSRAM+2) != 0x5678)) { + /* try with CRE=1 (MT45W2M16A) */ + at91_set_gpio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */ + + /* write RCR of the PSRAM */ + x = readw(PSRAM_CTRL_REG); + x = readw(PSRAM_CTRL_REG); + writew(0, PSRAM_CTRL_REG); /* 0 - RCR,1 - BCR */ + /* set RCR;0x10-async mode,0x90-page mode */ + writew(0x90, PSRAM_CTRL_REG); + + + writew(0x1234, PHYS_PSRAM); + writew(0x5678, PHYS_PSRAM+2); + if ((readw(PHYS_PSRAM) != 0x1234) + || (readw(PHYS_PSRAM + 2) != 0x5678)) + return 1; + + } + + /* Bus matrix */ + at91_sys_write( AT91_MATRIX_PRAS5, AT91_MATRIX_M5PR ); + at91_sys_write( AT91_MATRIX_SCFG5, AT91_MATRIX_ARBT_FIXED_PRIORITY | + (AT91_MATRIX_FIXED_DEFMSTR & (5 << 18)) | + AT91_MATRIX_DEFMSTR_TYPE_FIXED | + (AT91_MATRIX_SLOT_CYCLE & (0x80 << 0))); + + return 0; +} +#endif + +static void pm9263_lcd_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PC0, 0); /* LCDVSYNC */ + at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ + at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC); + + /* Power Control */ + at91_set_gpio_output(AT91_PIN_PA22, 1); + at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */ + +#ifdef CONFIG_LCD_IN_PSRAM + /* initialize te PSRAM */ + int stat = pm9263_lcd_hw_psram_init(); + + gd->fb_base = (stat == 0) ? PHYS_PSRAM : AT91SAM9263_SRAM0_BASE; +#else + gd->fb_base = AT91SAM9263_SRAM0_BASE; +#endif + +} + +#ifdef CONFIG_LCD_INFO +#include +#include + +extern flash_info_t flash_info[]; + +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size, flash_size, dataflash_size; + int i; + char temp[32]; + + lcd_printf ("%s\n", U_BOOT_VERSION); + lcd_printf ("(C) 2009 Ronetix GmbH\n"); + lcd_printf ("support@ronetix.at\n"); + lcd_printf ("%s CPU at %s MHz", + AT91_CPU_NAME, + strmhz(temp, get_cpu_clk_rate())); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + + flash_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) + flash_size += flash_info[i].size; + + dataflash_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) + dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number * + dataflash_info[i].Device.pages_size; + + lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n" + "4 MB PSRAM, %ld MB DataFlash\n", + dram_size >> 20, + nand_size >> 20, + flash_size >> 20, + dataflash_size >> 20); +} +#endif /* CONFIG_LCD_INFO */ + +#endif /* CONFIG_LCD */ + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + + at91_sys_write(AT91_PMC_PCER, + (1 << AT91SAM9263_ID_PIOA) | + (1 << AT91SAM9263_ID_PIOCDE) | + (1 << AT91SAM9263_ID_PIOB)); + + /* arch number of AT91SAM9263EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_PM9263; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + pm9263_nand_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91_spi0_hw_init(1 << 0); +#endif +#ifdef CONFIG_MACB + pm9263_macb_hw_init(); +#endif +#ifdef CONFIG_USB_OHCI_NEW + at91_uhp_hw_init(); +#endif +#ifdef CONFIG_LCD + pm9263_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x01); +#endif + return rc; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard (void) +{ + char *ss; + char buf[32]; + + printf ("Board : Ronetix PM9263\n"); + printf ("Crystal frequency: %8s MHz\n", + strmhz(buf, get_main_clk_rate())); + printf ("CPU clock : %8s MHz\n", + strmhz(buf, get_cpu_clk_rate())); + printf ("Master clock : %8s MHz\n", + strmhz(buf, get_mck_clk_rate())); + + switch (gd->fb_base) { + case PHYS_PSRAM: + ss = "(PSRAM)"; + break; + + case AT91SAM9263_SRAM0_BASE: + ss = "(Internal SRAM)"; + break; + + default: + ss = ""; + break; + } + printf("Video memory : 0x%08lX %s\n", gd->fb_base, ss ); + + printf ("\n"); + return 0; +} +#endif diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile index 3d45c427cc..fbc82d1258 100644 --- a/cpu/arm926ejs/at91/Makefile +++ b/cpu/arm926ejs/at91/Makefile @@ -63,11 +63,14 @@ SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) -all: $(obj).depend $(LIB) +all: $(obj).depend $(LIB) $(obj)u-boot.lds $(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) +$(obj)u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -DCONFIG_BOARDDIR=$(BOARDDIR) -P $^ > $@ + ######################################################################### # defines $(obj).depend target diff --git a/cpu/arm926ejs/at91/config.mk b/cpu/arm926ejs/at91/config.mk index 06177e6c39..147bd4c15a 100644 --- a/cpu/arm926ejs/at91/config.mk +++ b/cpu/arm926ejs/at91/config.mk @@ -1,2 +1,2 @@ PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,) -LDSCRIPT := $(SRCTREE)/cpu/arm926ejs/at91/u-boot.lds +LDSCRIPT := $(OBJTREE)/cpu/arm926ejs/at91/u-boot.lds diff --git a/cpu/arm926ejs/at91/lowlevel_init.S b/cpu/arm926ejs/at91/lowlevel_init.S index ec6ad5da18..54b3f3dd16 100644 --- a/cpu/arm926ejs/at91/lowlevel_init.S +++ b/cpu/arm926ejs/at91/lowlevel_init.S @@ -30,6 +30,8 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT .globl lowlevel_init +.weak lowlevel_init +.set lowlevel_init,function lowlevel_init: /* diff --git a/cpu/arm926ejs/at91/u-boot.lds b/cpu/arm926ejs/at91/u-boot.lds.S similarity index 90% rename from cpu/arm926ejs/at91/u-boot.lds rename to cpu/arm926ejs/at91/u-boot.lds.S index ebb1f93864..4e82bcaa6a 100644 --- a/cpu/arm926ejs/at91/u-boot.lds +++ b/cpu/arm926ejs/at91/u-boot.lds.S @@ -21,6 +21,8 @@ * MA 02111-1307 USA */ +#include + OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") /*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ OUTPUT_ARCH(arm) @@ -32,8 +34,11 @@ SECTIONS . = ALIGN(4); .text : { - cpu/arm926ejs/start.o (.text) - *(.text) + cpu/arm926ejs/start.o (.text) +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + board/CONFIG_BOARDDIR/lowlevel_init.o (.text) +#endif + *(.text) } . = ALIGN(4); diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h index 98251cbeee..07b265f23a 100644 --- a/include/asm-arm/arch-at91/at91sam9263.h +++ b/include/asm-arm/arch-at91/at91sam9263.h @@ -106,6 +106,7 @@ #define AT91_USART2 AT91SAM9263_BASE_US2 #define AT91_SMC AT91_SMC0 +#define AT91_SDRAMC AT91_SDRAMC0 /* * Internal Memory. diff --git a/include/asm-arm/arch-at91/at91sam9_sdramc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h new file mode 100644 index 0000000000..5af2b54b12 --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h @@ -0,0 +1,87 @@ +/* + * [origin: Linux kernel arch/arm/mach-at91/include/mach/at91_wdt.h] + * + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD + * Copyright (C) 2007 Andrew Victor + * Copyright (C) 2007 Atmel Corporation. + * + * SDRAM Controllers (SDRAMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9_SDRAMC_H +#define AT91SAM9_SDRAMC_H + +/* SDRAM Controller (SDRAMC) registers */ +#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ +#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91_SDRAMC_MODE_NORMAL 0 +#define AT91_SDRAMC_MODE_NOP 1 +#define AT91_SDRAMC_MODE_PRECHARGE 2 +#define AT91_SDRAMC_MODE_LMR 3 +#define AT91_SDRAMC_MODE_REFRESH 4 +#define AT91_SDRAMC_MODE_EXT_LMR 5 +#define AT91_SDRAMC_MODE_DEEP 6 + +#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ +#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ +#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_SDRAMC_NC_8 (0 << 0) +#define AT91_SDRAMC_NC_9 (1 << 0) +#define AT91_SDRAMC_NC_10 (2 << 0) +#define AT91_SDRAMC_NC_11 (3 << 0) +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR_11 (0 << 2) +#define AT91_SDRAMC_NR_12 (1 << 2) +#define AT91_SDRAMC_NR_13 (2 << 2) +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB_2 (0 << 4) +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_CAS_1 (1 << 5) +#define AT91_SDRAMC_CAS_2 (2 << 5) +#define AT91_SDRAMC_CAS_3 (3 << 5) +#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ +#define AT91_SDRAMC_DBW_32 (0 << 7) +#define AT91_SDRAMC_DBW_16 (1 << 7) +#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ +#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ +#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ +#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ +#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ +#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ + +#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ +#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_SDRAMC_LPCB_DISABLE 0 +#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 +#define AT91_SDRAMC_LPCB_POWER_DOWN 2 +#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ +#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ +#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ +#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ +#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ +#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ + +#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ +#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ +#define AT91_SDRAMC_MD_SDRAM 0 +#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 + + +#endif diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h index 6b46a366a6..870410645f 100644 --- a/include/asm-arm/arch-at91/hardware.h +++ b/include/asm-arm/arch-at91/hardware.h @@ -48,6 +48,23 @@ #error "Unsupported AT91 processor" #endif +/* External Memory Map */ +#define AT91_CHIPSELECT_0 0x10000000 +#define AT91_CHIPSELECT_1 0x20000000 +#define AT91_CHIPSELECT_2 0x30000000 +#define AT91_CHIPSELECT_3 0x40000000 +#define AT91_CHIPSELECT_4 0x50000000 +#define AT91_CHIPSELECT_5 0x60000000 +#define AT91_CHIPSELECT_6 0x70000000 +#define AT91_CHIPSELECT_7 0x80000000 + +/* SDRAM */ +#ifdef CONFIG_DRAM_BASE +#define AT91_SDRAM_BASE CONFIG_DRAM_BASE +#else +#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 +#endif + /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h new file mode 100644 index 0000000000..9ae737f401 --- /dev/null +++ b/include/configs/pm9263.h @@ -0,0 +1,367 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * Ilko Iliev + * + * Configuation settings for the RONETIX PM9263 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_CPU_NAME "AT91SAM9263" + +#define CONFIG_DISPLAY_BOARDINFO + +#define MASTER_PLL_DIV 15 +#define MASTER_PLL_MUL 162 +#define MAIN_PLL_DIV 2 /* 2 or 4 */ +#define AT91_MAIN_CLOCK 18432000 + +#define CONFIG_SYS_HZ 1000000 + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/ +#define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* clocks */ +#define CONFIG_SYS_MOR_VAL 0x00002001 /* CKGR_MOR - enable main osc. */ +#define CONFIG_SYS_PLLAR_VAL \ + (0x2000BF00 | ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) + +#if (MAIN_PLL_DIV == 2) +/* PCK/2 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR1_VAL 0x00000100 +/* PCK/2 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR2_VAL 0x00000102 +#else +/* PCK/4 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR1_VAL 0x00000200 +/* PCK/4 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR2_VAL 0x00000202 +#endif +/* define PDC[31:16] as DATA[31:16] */ +#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 +/* no pull-up for D[31:16] */ +#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 +/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ +#define CONFIG_SYS_MATRIX_EBI0CSA_VAL 0x0001010A +/* EBI1_CSA, 3.3v, no pull-ups */ +#define CONFIG_SYS_MATRIX_EBI1CSA_VAL 0x00010100 + +/* SDRAM */ +/* SDRAMC_MR Mode register */ +#define CONFIG_SYS_SDRC_MR_VAL1 0 +/* SDRAMC_TR - Refresh Timer register */ +#define CONFIG_SYS_SDRC_TR_VAL1 0x13C +#define CONFIG_SYS_SDRC_CR_VAL 0x85227279 /*CL3*/ +/* Memory Device Register -> SDRAM */ +#define CONFIG_SYS_SDRC_MDR_VAL 0 +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000002 /* SDRAMC_MR */ +#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL3 4 /* SDRC_MR */ +#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL4 3 /* SDRC_MR */ +#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL5 0 /* SDRC_MR */ +#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ + +/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ +#define CONFIG_SYS_SMC0_SETUP0_VAL 0x0A0A0A0A /* SMC_SETUP */ +#define CONFIG_SYS_SMC0_PULSE0_VAL 0x0B0B0B0B /* SMC_PULSE */ +#define CONFIG_SYS_SMC0_CYCLE0_VAL 0x00160016 /* SMC_CYCLE */ +#define CONFIG_SYS_SMC0_CTRL0_VAL 0x00161003 /* SMC_MODE */ + +/* setup SMC1, CS0 (PSRAM) - 16-bit */ +#define CONFIG_SYS_SMC1_SETUP0_VAL 0x00000000 /* SMC_SETUP */ +#define CONFIG_SYS_SMC1_PULSE0_VAL 0x07020707 /* SMC_PULSE */ +#define CONFIG_SYS_SMC1_CYCLE0_VAL 0x00080008 /* SMC_CYCLE */ +#define CONFIG_SYS_SMC1_CTRL0_VAL 0x31001000 /* SMC_MODE */ + +#define CONFIG_SYS_RSTC_RMR_VAL 0xA5000301 /* user reset enable */ + +/* Watchdog */ +#define CONFIG_SYS_WDTC_WDMR_VAL 0x3fff8fff /* disable watchdog */ + +/* */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#define CONFIG_USER_LOWLEVEL_INIT 1 + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CONFIG_SYS_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_BGR555 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 + +#define CONFIG_LCD_IN_PSRAM 1 + +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_ATMEL_DATAFLASH_SPI +#define CONFIG_HAS_DATAFLASH 1 +#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NOR flash, if populated */ +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30 +#endif + +#define CONFIG_CMD_JFFS2 1 +#define CONFIG_JFFS2_CMDLINE 1 +#define CONFIG_JFFS2_NAND 1 +#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ +#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/ + +/* PSRAM */ +#define PHYS_PSRAM 0x70000000 +#define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#define CONFIG_SYS_USE_FLASH 1 +#undef CONFIG_SYS_USE_DATAFLASH +#undef CONFIG_SYS_USE_NANDFLASH + +#ifdef CONFIG_SYS_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_DATAFLASH +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) "\ + "rw rootfstype=jffs2" + +#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ + "mtdparts=at91_nand:" \ + "128k(bootstrap)ro," \ + "256k(uboot)ro," \ + "128k(env1)ro," \ + "128k(env2)ro," \ + "2M(linux)," \ + "-(root) " \ + "rw rootfstype=jffs2" + +#elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */ + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_OVERWRITE 1 + +/* JFFS Partition offset set */ +#define CONFIG_SYS_JFFS2_FIRST_BANK 0 +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +/* 512k reserved for u-boot */ +#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 + +#define CONFIG_BOOTCOMMAND "run flashboot" +#define CONFIG_ROOTPATH /ronetix/rootfs +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" + +#define CONFIG_CON_ROT "fbcon=rotate:3 " +#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\ + CONFIG_CON_ROT + +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:" \ + "256k(u-boot)ro," \ + "64k(u-boot-env)ro," \ + "1408k(kernel)," \ + "-(rootfs);" \ + "nand:-(nand)" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,0\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + CONFIG_CON_ROT \ + "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot 0x22000000 vmImage;" \ + "run ramargs;run addip;bootm 22000000\0" \ + "nfsboot=tftpboot 0x22000000 vmImage;" \ + "run nfsargs;run addip;bootm 22000000\0" \ + "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ + "" + +#else +#error "Undefined memory device" +#endif + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "u-boot-pm9263> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/tools/Makefile b/tools/Makefile index 70d87b0b48..43c284c382 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -122,6 +122,9 @@ endif ifeq ($(VENDOR),atmel) LOGO_BMP= logos/atmel.bmp endif +ifeq ($(VENDOR),ronetix) +LOGO_BMP= logos/ronetix.bmp +endif # now $(obj) is defined SRCS += $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c)) diff --git a/tools/logos/ronetix.bmp b/tools/logos/ronetix.bmp new file mode 100644 index 0000000000000000000000000000000000000000..f956813915c7822ba11a3ab81ad9f48fa2849a5c GIT binary patch literal 5638 zcmd6qPgoO26u>9!GQ+G%SPCLU3BjO7DVS2!)VBPyv;owl)Y#NEim_WTHkD<1;K-39 z#~e9wm?KAyee-X3!v|>l=~v&!_y!q{$nKzT!2e=mr!EFeoptJ*; z01crI_z%(p&tp>mhDWYa;C)92{Mo3(=GupBu69=`>2G zGbo+Opp4LIl$oAJ(?YXoI-5mVp?UCgfU@~K$_p)mzXQ-Z$`^~^w~mTni^XN|4dvx! zv<#X`*TJr$<<(UfqmEX=W`tdXao~Av4XuGrXX{`$U@Wj3VDojf0d`|!6K!m6!Wa#- z3AQNg7TVm}LR&(&!Dj<)ZEvG((ABjD_-R17hPG=p=-)s!u(jF_s_pEc9ih9>w~2Ok zchRoUJ+!;GhxR~gwIB*LXXhV(GmKFecD3DKW)CSnf{~! zBg8l!!D`vjQg$o3*_l?ET`0j9J)fMJnal@1Z4oNCOcq#mc1o7j|EZaZXgJTSMW>2r zF*WC?mXqaxC-x|(WTDI=l$tk#FWHN38kTYnrx&8wI4+oux-1(qjL;>&T-EQs-Uxs4I;w?ycg{YMqiL(-*l2GFlJjrW#{3tc< zD!kQh56>87Y(nzsfPxjx@%dIhw@>sUb{Hl@$Ir5Z63w3!KZl1>0OGJ%f-Ai$BACt# zB*|x9m3&UGhlk;d*|;3{&XSfNZBB^0Tlq$1vuL`*=fmAqHy~?kr|_{HfnJohUw|c8 z(&538B}t_C`1)WFY(1aE3NPUrx4#|L%FQ##`c75R0ASh;tL%|9d`HEjeqVQ>|j7 zUw|Lut6ub?ho>ZwoL_tR&muXJ`={Md@(YL}~9O zY(`Bj#nyese*InJsr`XRZtCb+7iJ$VEj@lAVth7V`xREA!Z9J@oBlIjp;PhUNP(?? z7aRIT142dxA-1KzmWKJnP|F^L2|Jt59I1*U3pT~K!k^~j8=BaK$5IMKxt@aaD?W>a z)izzw>(A&Zv%kKM4aTqO2&&De!|PEJ+y)E&9ekN78FfP)#ENg7=NUL-j!A&e3G+R# z`DU;h-srEemtVw&hK6Eef6CrZL`zCcUsPj4OPbGLkS+PyynBHU1ILNHKk4!dX+7I&hY^7t91#O=Wj{Zh$mOY5eCCTLX+_$m+xq~9p&`u z{Gds(I*6r{y^0@WD>f$fLw$`?c2O)c+?&hYcf_F~_^Mab#w2)xv8RI)Z)h;~gXCkg zJSo6jdg3TRW0tAp5x4{Lcv0Lh&Rhg|q z#u8Q}Lhq=7uG4d;i$!v53DTIHDQb4hBanA}5YvFMFJDVvW$TJ^DhxkHL12El1TJx^ zC~7NGR{W!!v1+CA>Xio$m(`t*rCcY;s7<-sf1#TRb%oShY z&4(`XJPFCeOzCeD1H8Va0S99b)R0Tbl$NBK_;S^IzW3dt~sMt{VyI z1g&pj)STBZKbnO+Df3F}2;L_4`P`JgAn=fLA?jMx+VulJm8casoIK}x6A#|-s;d4^ zBSD7)dChC|;S2e~i9XdP4)8IjOC7u-dgso6-?C^=^zsoa?}=YOSR NZ2eYzcz8HI_77a#1d{*& literal 0 HcmV?d00001 -- 2.25.1