From eda8e6b8efccad268074dad98a640896f01f39f2 Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Sun, 15 Dec 2019 18:10:18 +0900 Subject: [PATCH] ar71xx: fix MAC address setup for TL-WDR4300 board The current ethernet MAC address setup of TL-WDR4300 board is different from the setup of stock firmware: OpenWrt: lan = label_mac -2, wan = label_mac -2 stock: lan = label_mac, wan = label_mac +1 This patch applies to all devices using TL-WDR4300 board: TL-WDR3600 v1 TL-WDR4300 v1 TL-WDR4300 v1 (IL) TL-WDR4310 v1 Mercury MW4530R v1 Signed-off-by: Sungbo Eo (cherry picked from commit 9b02d32e34df2bb8821ec6f08f525bee22d0d1ba) --- target/linux/ar71xx/base-files/etc/board.d/02_network | 4 ++++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index c1873c1653..99021eae65 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -633,6 +633,10 @@ ar71xx_setup_macs() fritz300e) lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) ;; + tl-wdr4300) + base_mac=$(mtd_get_mac_binary u-boot 0x1fc00) + wan_mac=$(macaddr_add "$base_mac" 1) + ;; tl-wr1043n-v5|\ tl-wr1043nd-v4) lan_mac=$(mtd_get_mac_binary product-info 8) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c index 972cb7960d..b9fea95bc2 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c @@ -183,7 +183,7 @@ static void __init wdr4300_setup(void) ath79_register_mdio(0, 0x0); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); /* GMAC0 is connected to an AR8327N switch */ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -- 2.25.1