From ed474ae00c7b2b51fc97b0580d2e52483a657acb Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 16 Sep 2019 13:47:15 +0530 Subject: [PATCH] arm: omap: emif-common: Fix ecc address calculation ecc_address_range registers contains the start address and end address of the DDR address space. But the ddr driver is assuming the register contains the start address and size of the DDR address space. Because of this the ecc enabling is failing for the 2nd range of ecc addresses. Fix this calculation. Signed-off-by: Lokesh Vutla --- arch/arm/mach-omap2/emif-common.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-omap2/emif-common.c b/arch/arm/mach-omap2/emif-common.c index b384343a3f..04bbfd84a2 100644 --- a/arch/arm/mach-omap2/emif-common.c +++ b/arch/arm/mach-omap2/emif-common.c @@ -348,7 +348,7 @@ static void dra7_reset_ddr_data(u32 base, u32 size) static void dra7_enable_ecc(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 rgn, size; + u32 rgn, rgn_start, size; /* ECC available only on dra76x EMIF1 */ if ((base != EMIF1_BASE) || !is_dra76x()) @@ -362,22 +362,22 @@ static void dra7_enable_ecc(u32 base, const struct emif_regs *regs) writel(regs->emif_ecc_ctrl_reg, &emif->emif_ecc_ctrl_reg); /* Set region1 memory with 0 */ - rgn = ((regs->emif_ecc_address_range_1 & - EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16) + - CONFIG_SYS_SDRAM_BASE; + rgn_start = (regs->emif_ecc_address_range_1 & + EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16; + rgn = rgn_start + CONFIG_SYS_SDRAM_BASE; size = (regs->emif_ecc_address_range_1 & - EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000; + EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000 - rgn_start; if (regs->emif_ecc_ctrl_reg & EMIF_ECC_REG_ECC_ADDR_RGN_1_EN_MASK) dra7_reset_ddr_data(rgn, size); /* Set region2 memory with 0 */ - rgn = ((regs->emif_ecc_address_range_2 & - EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16) + - CONFIG_SYS_SDRAM_BASE; + rgn_start = (regs->emif_ecc_address_range_2 & + EMIF_ECC_REG_ECC_START_ADDR_MASK) << 16; + rgn = rgn_start + CONFIG_SYS_SDRAM_BASE; size = (regs->emif_ecc_address_range_2 & - EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000; + EMIF_ECC_REG_ECC_END_ADDR_MASK) + 0x10000 - rgn_start; if (regs->emif_ecc_ctrl_reg & EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_MASK) -- 2.25.1