From ece90fc9df74ab4ef2a3fbc10bcd955f0212619a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 29 Sep 2018 19:47:41 +0200 Subject: [PATCH] mac80211: move rt2x00 packaging code to ralink.mk Signed-off-by: Felix Fietkau --- package/kernel/mac80211/Makefile | 240 +++++------------------------- package/kernel/mac80211/ralink.mk | 172 +++++++++++++++++++++ 2 files changed, 209 insertions(+), 203 deletions(-) create mode 100644 package/kernel/mac80211/ralink.mk diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index 32c1cc568d..e0d40f3236 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -37,10 +37,6 @@ PKG_DRIVERS = \ mwl8k mwifiex-pcie mwifiex-sdio \ p54-common p54-pci p54-spi p54-usb \ rsi91x rsi91x-usb rsi91x-sdio\ - rt2x00-lib rt2x00-pci rt2x00-usb rt2x00-mmio \ - rt2400-pci rt2500-pci rt2500-usb \ - rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \ - rt61-pci rt73-usb \ rtl8180 rtl8187 \ rtlwifi rtlwifi-pci rtlwifi-btcoexist rtlwifi-usb rtl8192c-common \ rtl8192ce rtl8192se rtl8192de rtl8192cu rtl8821ae \ @@ -50,7 +46,6 @@ PKG_DRIVERS = \ PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_kmod-mac80211 \ - $(patsubst %,CONFIG_PACKAGE_kmod-%,$(PKG_DRIVERS)) \ CONFIG_PACKAGE_MAC80211_DEBUGFS \ CONFIG_PACKAGE_MAC80211_MESH \ CONFIG_PACKAGE_MAC80211_TRACING \ @@ -70,8 +65,6 @@ PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_BRCM80211_DEBUG \ CONFIG_PACKAGE_IWLWIFI_DEBUG \ CONFIG_PACKAGE_IWLWIFI_DEBUGFS \ - CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS \ - CONFIG_PACKAGE_RT2X00_DEBUG \ CONFIG_PACKAGE_RTLWIFI_DEBUG \ CONFIG_ATH9K_SUPPORT_PCOEM \ CONFIG_ATH9K_TX99 \ @@ -89,6 +82,43 @@ define KernelPackage/mac80211/Default MAINTAINER:=Felix Fietkau endef +config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m) + +config-y:= \ + WLAN \ + NL80211_TESTMODE \ + CFG80211_WEXT \ + CFG80211_CERTIFICATION_ONUS \ + MAC80211_RC_MINSTREL \ + MAC80211_RC_MINSTREL_HT \ + MAC80211_RC_MINSTREL_VHT \ + MAC80211_RC_DEFAULT_MINSTREL \ + WLAN_VENDOR_ADMTEK \ + WLAN_VENDOR_ATH \ + WLAN_VENDOR_ATMEL \ + WLAN_VENDOR_BROADCOM \ + WLAN_VENDOR_CISCO \ + WLAN_VENDOR_INTEL \ + WLAN_VENDOR_INTERSIL \ + WLAN_VENDOR_MARVELL \ + WLAN_VENDOR_MEDIATEK \ + WLAN_VENDOR_RALINK \ + WLAN_VENDOR_REALTEK \ + WLAN_VENDOR_RSI \ + WLAN_VENDOR_ST \ + WLAN_VENDOR_TI \ + WLAN_VENDOR_ZYDAS \ + +config-$(call config_package,cfg80211) += CFG80211 + +config-$(call config_package,mac80211) += MAC80211 +config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH + +include ralink.mk + +PKG_CONFIG_DEPENDS += \ + $(patsubst %,CONFIG_PACKAGE_kmod-%,$(PKG_DRIVERS)) + define KernelPackage/cfg80211 $(call KernelPackage/mac80211/Default) TITLE:=cfg80211 - wireless configuration API @@ -1230,149 +1260,6 @@ define KernelPackage/rsi91x-sdio endef - -define KernelPackage/rt2x00/Default - $(call KernelPackage/mac80211/Default) - TITLE:=Ralink Drivers for RT2x00 cards -endef - -define KernelPackage/rt2x00-lib -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t - TITLE+= (LIB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko - MENU:=1 -endef - -define KernelPackage/rt2x00-lib/config - if PACKAGE_kmod-rt2x00-lib - - config PACKAGE_RT2X00_LIB_DEBUGFS - bool "Enable rt2x00 debugfs support" - depends on PACKAGE_MAC80211_DEBUGFS - help - Enable creation of debugfs files for the rt2x00 drivers. - These debugfs files support both reading and writing of the - most important register types of the rt2x00 hardware. - - config PACKAGE_RT2X00_DEBUG - bool "Enable rt2x00 debug output" - help - Enable debugging output for all rt2x00 modules - - endif -endef - -define KernelPackage/rt2x00-mmio -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6 - HIDDEN:=1 - TITLE+= (MMIO) - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko -endef - -define KernelPackage/rt2x00-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib - HIDDEN:=1 - TITLE+= (PCI) - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko - AUTOLOAD:=$(call AutoProbe,rt2x00pci) -endef - -define KernelPackage/rt2x00-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core - HIDDEN:=1 - TITLE+= (USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko - AUTOLOAD:=$(call AutoProbe,rt2x00usb) -endef - -define KernelPackage/rt2800-lib -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT - HIDDEN:=1 - TITLE+= (rt2800 LIB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko -endef - -define KernelPackage/rt2400-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2400 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko - AUTOLOAD:=$(call AutoProbe,rt2400pci) -endef - -define KernelPackage/rt2500-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2500 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko - AUTOLOAD:=$(call AutoProbe,rt2500pci) -endef - -define KernelPackage/rt2500-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb - TITLE+= (RT2500 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko - AUTOLOAD:=$(call AutoProbe,rt2500usb) -endef - -define KernelPackage/rt2800-mmio -$(call KernelPackage/rt2x00/Default) - TITLE += (RT28xx/RT3xxx MMIO) - DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio - HIDDEN:=1 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko -endef - -define KernelPackage/rt2800-soc -$(call KernelPackage/rt2x00/Default) - DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib - TITLE += (RT28xx/RT3xxx SoC) - FILES := \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko - AUTOLOAD:=$(call AutoProbe,rt2800soc) -endef - -define KernelPackage/rt2800-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio +rt2800-pci-firmware - TITLE+= (RT2860 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko - AUTOLOAD:=$(call AutoProbe,rt2800pci) -endef - -define KernelPackage/rt2800-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt +rt2800-usb-firmware - TITLE+= (RT2870 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko - AUTOLOAD:=$(call AutoProbe,rt2800usb) -endef - - -define KernelPackage/rt61-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +rt61-pci-firmware - TITLE+= (RT2x61 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko - AUTOLOAD:=$(call AutoProbe,rt61pci) -endef - -define KernelPackage/rt73-usb - $(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +rt73-usb-firmware - TITLE+= (RT73 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko - AUTOLOAD:=$(call AutoProbe,rt73usb) -endef - - define KernelPackage/rtl818x/Default $(call KernelPackage/mac80211/Default) TITLE:=Realtek Drivers for RTL818x devices @@ -1581,37 +1468,6 @@ endef -config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m) - -config-y:= \ - WLAN \ - NL80211_TESTMODE \ - CFG80211_WEXT \ - CFG80211_CERTIFICATION_ONUS \ - MAC80211_RC_MINSTREL \ - MAC80211_RC_MINSTREL_HT \ - MAC80211_RC_MINSTREL_VHT \ - MAC80211_RC_DEFAULT_MINSTREL \ - WLAN_VENDOR_ADMTEK \ - WLAN_VENDOR_ATH \ - WLAN_VENDOR_ATMEL \ - WLAN_VENDOR_BROADCOM \ - WLAN_VENDOR_CISCO \ - WLAN_VENDOR_INTEL \ - WLAN_VENDOR_INTERSIL \ - WLAN_VENDOR_MARVELL \ - WLAN_VENDOR_MEDIATEK \ - WLAN_VENDOR_RALINK \ - WLAN_VENDOR_REALTEK \ - WLAN_VENDOR_RSI \ - WLAN_VENDOR_ST \ - WLAN_VENDOR_TI \ - WLAN_VENDOR_ZYDAS \ - -config-$(call config_package,cfg80211) += CFG80211 - -config-$(call config_package,mac80211) += MAC80211 -config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS config-y += \ CFG80211_DEBUGFS \ @@ -1698,28 +1554,6 @@ config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM config-$(call config_package,mt7601u) += MT7601U config-y += WL_MEDIATEK -config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB -config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI -config-$(call config_package,rt2x00-mmio) += RT2X00_LIB_MMIO -config-$(call config_package,rt2x00-usb) += RT2X00_LIB_USB -config-$(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS) += RT2X00_LIB_DEBUGFS -config-$(CONFIG_PACKAGE_RT2X00_DEBUG) += RT2X00_DEBUG - -config-$(call config_package,rt2400-pci) += RT2400PCI -config-$(call config_package,rt2500-pci) += RT2500PCI -config-$(call config_package,rt2500-usb) += RT2500USB -config-$(call config_package,rt61-pci) += RT61PCI -config-$(call config_package,rt73-usb) += RT73USB - -config-$(call config_package,rt2800-lib) += RT2800_LIB - -config-$(call config_package,rt2800-soc) += RT2800SOC -config-$(call config_package,rt2800-pci) += RT2800PCI -config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290 - -config-$(call config_package,rt2800-usb) += RT2800USB -config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN - config-$(call config_package,iwl-legacy) += IWLEGACY config-$(call config_package,iwl3945) += IWL3945 config-$(call config_package,iwl4965) += IWL4965 diff --git a/package/kernel/mac80211/ralink.mk b/package/kernel/mac80211/ralink.mk new file mode 100644 index 0000000000..e4eca6e9b3 --- /dev/null +++ b/package/kernel/mac80211/ralink.mk @@ -0,0 +1,172 @@ +PKG_DRIVERS += \ + rt2x00-lib rt2x00-pci rt2x00-usb rt2x00-mmio \ + rt2400-pci rt2500-pci rt2500-usb \ + rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \ + rt61-pci rt73-usb + +PKG_CONFIG_DEPENDS += \ + CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS \ + CONFIG_PACKAGE_RT2X00_DEBUG + +config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB +config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI +config-$(call config_package,rt2x00-mmio) += RT2X00_LIB_MMIO +config-$(call config_package,rt2x00-usb) += RT2X00_LIB_USB +config-$(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS) += RT2X00_LIB_DEBUGFS +config-$(CONFIG_PACKAGE_RT2X00_DEBUG) += RT2X00_DEBUG + +config-$(call config_package,rt2400-pci) += RT2400PCI +config-$(call config_package,rt2500-pci) += RT2500PCI +config-$(call config_package,rt2500-usb) += RT2500USB +config-$(call config_package,rt61-pci) += RT61PCI +config-$(call config_package,rt73-usb) += RT73USB + +config-$(call config_package,rt2800-lib) += RT2800_LIB + +config-$(call config_package,rt2800-soc) += RT2800SOC +config-$(call config_package,rt2800-pci) += RT2800PCI +config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290 + +config-$(call config_package,rt2800-usb) += RT2800USB +config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN + +define KernelPackage/rt2x00/Default + $(call KernelPackage/mac80211/Default) + TITLE:=Ralink Drivers for RT2x00 cards +endef + +define KernelPackage/rt2x00-lib +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t + TITLE+= (LIB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko + MENU:=1 +endef + +define KernelPackage/rt2x00-lib/config + if PACKAGE_kmod-rt2x00-lib + + config PACKAGE_RT2X00_LIB_DEBUGFS + bool "Enable rt2x00 debugfs support" + depends on PACKAGE_MAC80211_DEBUGFS + help + Enable creation of debugfs files for the rt2x00 drivers. + These debugfs files support both reading and writing of the + most important register types of the rt2x00 hardware. + + config PACKAGE_RT2X00_DEBUG + bool "Enable rt2x00 debug output" + help + Enable debugging output for all rt2x00 modules + + endif +endef + +define KernelPackage/rt2x00-mmio +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6 + HIDDEN:=1 + TITLE+= (MMIO) + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko +endef + +define KernelPackage/rt2x00-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib + HIDDEN:=1 + TITLE+= (PCI) + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko + AUTOLOAD:=$(call AutoProbe,rt2x00pci) +endef + +define KernelPackage/rt2x00-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core + HIDDEN:=1 + TITLE+= (USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko + AUTOLOAD:=$(call AutoProbe,rt2x00usb) +endef + +define KernelPackage/rt2800-lib +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT + HIDDEN:=1 + TITLE+= (rt2800 LIB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko +endef + +define KernelPackage/rt2400-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci + TITLE+= (RT2400 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko + AUTOLOAD:=$(call AutoProbe,rt2400pci) +endef + +define KernelPackage/rt2500-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci + TITLE+= (RT2500 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko + AUTOLOAD:=$(call AutoProbe,rt2500pci) +endef + +define KernelPackage/rt2500-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb + TITLE+= (RT2500 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko + AUTOLOAD:=$(call AutoProbe,rt2500usb) +endef + +define KernelPackage/rt2800-mmio +$(call KernelPackage/rt2x00/Default) + TITLE += (RT28xx/RT3xxx MMIO) + DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio + HIDDEN:=1 + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko +endef + +define KernelPackage/rt2800-soc +$(call KernelPackage/rt2x00/Default) + DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib + TITLE += (RT28xx/RT3xxx SoC) + FILES := \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko + AUTOLOAD:=$(call AutoProbe,rt2800soc) +endef + +define KernelPackage/rt2800-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio +rt2800-pci-firmware + TITLE+= (RT2860 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko + AUTOLOAD:=$(call AutoProbe,rt2800pci) +endef + +define KernelPackage/rt2800-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt +rt2800-usb-firmware + TITLE+= (RT2870 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko + AUTOLOAD:=$(call AutoProbe,rt2800usb) +endef + + +define KernelPackage/rt61-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +rt61-pci-firmware + TITLE+= (RT2x61 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko + AUTOLOAD:=$(call AutoProbe,rt61pci) +endef + +define KernelPackage/rt73-usb + $(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +rt73-usb-firmware + TITLE+= (RT73 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko + AUTOLOAD:=$(call AutoProbe,rt73usb) +endef -- 2.25.1