From eb8c54bfaabec7b8ba65a054f6c3e37572288ae9 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 25 Apr 2014 12:21:04 +0200 Subject: [PATCH] ARM: zynq: ehci: Added USB host driver support Added USB host driver for zynq. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek --- arch/arm/cpu/armv7/zynq/slcr.c | 24 +++++ arch/arm/include/asm/arch-zynq/hardware.h | 2 + drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-zynq.c | 104 ++++++++++++++++++++++ 4 files changed, 131 insertions(+) create mode 100644 drivers/usb/host/ehci-zynq.c diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c index 51894f9239..934ccc31c8 100644 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -14,6 +14,8 @@ #define SLCR_LOCK_MAGIC 0x767B #define SLCR_UNLOCK_MAGIC 0xDF0D +#define SLCR_USB_L1_SEL 0x04 + #define SLCR_IDCODE_MASK 0x1F000 #define SLCR_IDCODE_SHIFT 12 @@ -34,7 +36,29 @@ struct zynq_slcr_mio_get_status { u32 check_val; }; +static const int usb0_pins[] = { + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39 +}; + +static const int usb1_pins[] = { + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51 +}; + static const struct zynq_slcr_mio_get_status mio_periphs[] = { + { + "usb0", + usb0_pins, + ARRAY_SIZE(usb0_pins), + SLCR_USB_L1_SEL, + SLCR_USB_L1_SEL, + }, + { + "usb1", + usb1_pins, + ARRAY_SIZE(usb1_pins), + SLCR_USB_L1_SEL, + SLCR_USB_L1_SEL, + }, }; static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */ diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index a9d091f141..2aede0c552 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -23,6 +23,8 @@ #define ZYNQ_SPI_BASEADDR1 0xE0007000 #define ZYNQ_DDRC_BASEADDR 0xF8006000 #define ZYNQ_EFUSE_BASEADDR 0xF800D000 +#define ZYNQ_USB_BASEADDR0 0xE0002000 +#define ZYNQ_USB_BASEADDR1 0xE0003000 /* Bootmode setting values */ #define ZYNQ_BM_MASK 0x7 diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index b301e28252..7211c6ad96 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o +obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o # xhci obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o diff --git a/drivers/usb/host/ehci-zynq.c b/drivers/usb/host/ehci-zynq.c new file mode 100644 index 0000000000..7770d05646 --- /dev/null +++ b/drivers/usb/host/ehci-zynq.c @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2014, Xilinx, Inc + * + * USB Low level initialization(Specific to zynq) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "ehci.h" + +#define ZYNQ_USB_USBCMD_RST 0x0000002 +#define ZYNQ_USB_USBCMD_STOP 0x0000000 +#define ZYNQ_USB_NUM_MIO 12 + +/* + * Create the appropriate control structures to manage + * a new EHCI host controller. + */ +int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, + struct ehci_hcor **hcor) +{ + struct usb_ehci *ehci; + struct ulpi_viewport ulpi_vp; + int ret, mio_usb; + /* Used for writing the ULPI data address */ + struct ulpi_regs *ulpi = (struct ulpi_regs *)0; + + if (!index) { + mio_usb = zynq_slcr_get_mio_pin_status("usb0"); + if (mio_usb != ZYNQ_USB_NUM_MIO) { + printf("usb0 wrong num MIO: %d, Index %d\n", mio_usb, + index); + return -1; + } + ehci = (struct usb_ehci *)ZYNQ_USB_BASEADDR0; + } else { + mio_usb = zynq_slcr_get_mio_pin_status("usb1"); + if (mio_usb != ZYNQ_USB_NUM_MIO) { + printf("usb1 wrong num MIO: %d, Index %d\n", mio_usb, + index); + return -1; + } + ehci = (struct usb_ehci *)ZYNQ_USB_BASEADDR1; + } + + *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); + *hcor = (struct ehci_hcor *)((uint32_t) *hccr + + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + + ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint; + ulpi_vp.port_num = 0; + + ret = ulpi_init(&ulpi_vp); + if (ret) { + puts("zynq ULPI viewport init failed\n"); + return -1; + } + + /* ULPI set flags */ + ulpi_write(&ulpi_vp, &ulpi->otg_ctrl, + ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN | + ULPI_OTG_EXTVBUSIND); + ulpi_write(&ulpi_vp, &ulpi->function_ctrl, + ULPI_FC_FULL_SPEED | ULPI_FC_OPMODE_NORMAL | + ULPI_FC_SUSPENDM); + ulpi_write(&ulpi_vp, &ulpi->iface_ctrl, 0); + + /* Set VBus */ + ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + + return 0; +} + +/* + * Destroy the appropriate control structures corresponding + * the the EHCI host controller. + */ +int ehci_hcd_stop(int index) +{ + struct usb_ehci *ehci; + + if (!index) + ehci = (struct usb_ehci *)ZYNQ_USB_BASEADDR0; + else + ehci = (struct usb_ehci *)ZYNQ_USB_BASEADDR1; + + /* Stop controller */ + writel(ZYNQ_USB_USBCMD_STOP, &ehci->usbcmd); + udelay(1000); + + /* Initiate controller reset */ + writel(ZYNQ_USB_USBCMD_RST, &ehci->usbcmd); + + return 0; +} -- 2.25.1