From eb3813ad1afb29401fce20e9553df71e98f4aeec Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Fri, 5 Aug 2016 16:51:17 -0700 Subject: [PATCH] mx6ul_14x14_evk: don't use array for SD2 card detect pad Only a single pad is changed to change sdhc2_dat3 from an SDIO pin to and from GPIO4:5, so remove the array and use the imx_iomux_v3_setup_pad() routine. Signed-off-by: Eric Nelson Reviewed-by: Fabio Estevam --- .../mx6ul_14x14_evk/mx6ul_14x14_evk.c | 24 ++++++++----------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 66d679556b..c2138612a1 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -277,18 +277,16 @@ static iomux_v3_cfg_t const usdhc2_pads[] = { MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; -static iomux_v3_cfg_t const usdhc2_cd_pads[] = { - /* - * The evk board uses DAT3 to detect CD card plugin, - * in u-boot we mux the pin to GPIO when doing board_mmc_getcd. - */ - MX6_PAD_NAND_DATA03__GPIO4_IO05 | MUX_PAD_CTRL(USDHC_DAT3_CD_PAD_CTRL), -}; +/* + * The evk board uses DAT3 to detect CD card plugin, + * in u-boot we mux the pin to GPIO when doing board_mmc_getcd. + */ +static iomux_v3_cfg_t const usdhc2_cd_pad = + MX6_PAD_NAND_DATA03__GPIO4_IO05 | MUX_PAD_CTRL(USDHC_DAT3_CD_PAD_CTRL); -static iomux_v3_cfg_t const usdhc2_dat3_pads[] = { +static iomux_v3_cfg_t const usdhc2_dat3_pad = MX6_PAD_NAND_DATA03__USDHC2_DATA3 | - MUX_PAD_CTRL(USDHC_DAT3_CD_PAD_CTRL), -}; + MUX_PAD_CTRL(USDHC_DAT3_CD_PAD_CTRL); #endif static void setup_iomux_uart(void) @@ -351,8 +349,7 @@ int board_mmc_getcd(struct mmc *mmc) #if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK) ret = 1; #else - imx_iomux_v3_setup_multiple_pads(usdhc2_cd_pads, - ARRAY_SIZE(usdhc2_cd_pads)); + imx_iomux_v3_setup_pad(usdhc2_cd_pad); gpio_direction_input(USDHC2_CD_GPIO); /* @@ -361,8 +358,7 @@ int board_mmc_getcd(struct mmc *mmc) */ ret = gpio_get_value(USDHC2_CD_GPIO); - imx_iomux_v3_setup_multiple_pads(usdhc2_dat3_pads, - ARRAY_SIZE(usdhc2_dat3_pads)); + imx_iomux_v3_setup_pad(usdhc2_dat3_pad); #endif break; } -- 2.25.1