From e9e8d80d8c74f38cd259c60bd6128b294ede4975 Mon Sep 17 00:00:00 2001 From: =?utf8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Sat, 1 Dec 2018 18:42:09 +0100 Subject: [PATCH] serial: bcm6858: remove driver and switch to bcm6345 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: Álvaro Fernández Rojas --- arch/arm/dts/bcm6858.dtsi | 2 +- configs/bcm968580_ram_defconfig | 2 +- drivers/serial/Kconfig | 8 +- drivers/serial/Makefile | 1 - drivers/serial/serial_bcm6858.c | 300 -------------------------------- 5 files changed, 3 insertions(+), 310 deletions(-) delete mode 100644 drivers/serial/serial_bcm6858.c diff --git a/arch/arm/dts/bcm6858.dtsi b/arch/arm/dts/bcm6858.dtsi index 9869d729d3..d78d34d213 100644 --- a/arch/arm/dts/bcm6858.dtsi +++ b/arch/arm/dts/bcm6858.dtsi @@ -75,7 +75,7 @@ u-boot,dm-pre-reloc; uart0: serial@ff800640 { - compatible = "brcm,bcm6858-uart"; + compatible = "brcm,bcm6345-uart"; reg = <0x0 0xff800640 0x0 0x18>; clocks = <&periph_osc>; diff --git a/configs/bcm968580_ram_defconfig b/configs/bcm968580_ram_defconfig index abe90ee75f..4e10175a50 100644 --- a/configs/bcm968580_ram_defconfig +++ b/configs/bcm968580_ram_defconfig @@ -30,7 +30,7 @@ CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_CONS_INDEX=0 CONFIG_DM_SERIAL=y CONFIG_SERIAL_SEARCH_ALL=y -CONFIG_BCM6858_SERIAL=y +CONFIG_BCM6345_SERIAL=y CONFIG_SYSRESET=y CONFIG_REGEX=y # CONFIG_GENERATE_SMBIOS_TABLE is not set diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3bcc61e731..6252dd8c4b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -506,16 +506,10 @@ config BCM283X_PL011_SERIAL config BCM6345_SERIAL bool "Support for BCM6345 UART" - depends on DM_SERIAL && ARCH_BMIPS + depends on DM_SERIAL help Select this to enable UART on BCM6345 SoCs. -config BCM6858_SERIAL - bool "Support for BCM6858 UART" - depends on DM_SERIAL && ARCH_BCM6858 - help - Select this to enable UART on BCM6358 SoCs. - config FSL_LINFLEXUART bool "Freescale Linflex UART support" depends on DM_SERIAL diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index b6377b1076..2f8d065a4c 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -35,7 +35,6 @@ obj-$(CONFIG_AR933X_UART) += serial_ar933x.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o obj-$(CONFIG_BCM6345_SERIAL) += serial_bcm6345.o -obj-$(CONFIG_BCM6858_SERIAL) += serial_bcm6858.o obj-$(CONFIG_EFI_APP) += serial_efi.o obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o obj-$(CONFIG_MCFUART) += mcfuart.o diff --git a/drivers/serial/serial_bcm6858.c b/drivers/serial/serial_bcm6858.c deleted file mode 100644 index 8aa37055f0..0000000000 --- a/drivers/serial/serial_bcm6858.c +++ /dev/null @@ -1,300 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2018 Philippe Reynes - * - * Derived from linux/drivers/tty/serial/bcm63xx_uart.c: - * Copyright (C) 2008 Maxime Bizon - * Derived from linux/drivers/tty/serial/serial_bcm6345.c - * Copyright (C) 2017 Álvaro Fernández Rojas - */ - -#include -#include -#include -#include -#include -#include -#include - -/* UART Control register */ -#define UART_CTL_REG 0x0 -#define UART_CTL_RXTIMEOUT_MASK 0x1f -#define UART_CTL_RXTIMEOUT_5 0x5 -#define UART_CTL_RSTRXFIFO_SHIFT 6 -#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT) -#define UART_CTL_RSTTXFIFO_SHIFT 7 -#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT) -#define UART_CTL_STOPBITS_SHIFT 8 -#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT) -#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT) -#define UART_CTL_BITSPERSYM_SHIFT 12 -#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT) -#define UART_CTL_BITSPERSYM_8 (0x3 << UART_CTL_BITSPERSYM_SHIFT) -#define UART_CTL_XMITBRK_SHIFT 14 -#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT) -#define UART_CTL_RSVD_SHIFT 15 -#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT) -#define UART_CTL_RXPAREVEN_SHIFT 16 -#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT) -#define UART_CTL_RXPAREN_SHIFT 17 -#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT) -#define UART_CTL_TXPAREVEN_SHIFT 18 -#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT) -#define UART_CTL_TXPAREN_SHIFT 19 -#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT) -#define UART_CTL_LOOPBACK_SHIFT 20 -#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT) -#define UART_CTL_RXEN_SHIFT 21 -#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT) -#define UART_CTL_TXEN_SHIFT 22 -#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT) -#define UART_CTL_BRGEN_SHIFT 23 -#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT) - -/* UART Baudword register */ -#define UART_BAUD_REG 0x4 - -/* UART FIFO Config register */ -#define UART_FIFO_CFG_REG 0x8 -#define UART_FIFO_CFG_RX_SHIFT 8 -#define UART_FIFO_CFG_RX_MASK (0xf << UART_FIFO_CFG_RX_SHIFT) -#define UART_FIFO_CFG_RX_4 (0x4 << UART_FIFO_CFG_RX_SHIFT) -#define UART_FIFO_CFG_TX_SHIFT 12 -#define UART_FIFO_CFG_TX_MASK (0xf << UART_FIFO_CFG_TX_SHIFT) -#define UART_FIFO_CFG_TX_4 (0x4 << UART_FIFO_CFG_TX_SHIFT) - -/* UART Interrupt register */ -#define UART_IR_REG 0x10 -#define UART_IR_STAT(x) (1 << (x)) -#define UART_IR_TXEMPTY 5 -#define UART_IR_RXOVER 7 -#define UART_IR_RXNOTEMPTY 11 - -/* UART FIFO register */ -#define UART_FIFO_REG 0x14 -#define UART_FIFO_VALID_MASK 0xff -#define UART_FIFO_FRAMEERR_SHIFT 8 -#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT) -#define UART_FIFO_PARERR_SHIFT 9 -#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT) -#define UART_FIFO_BRKDET_SHIFT 10 -#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT) -#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \ - UART_FIFO_PARERR_MASK | \ - UART_FIFO_BRKDET_MASK) - -struct bcm6858_serial_priv { - void __iomem *base; - ulong uartclk; -}; - -/* enable rx & tx operation on uart */ -static void bcm6858_serial_enable(void __iomem *base) -{ - setbits_le32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | - UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); -} - -/* disable rx & tx operation on uart */ -static void bcm6858_serial_disable(void __iomem *base) -{ - clrbits_le32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | - UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); -} - -/* clear all unread data in rx fifo and unsent data in tx fifo */ -static void bcm6858_serial_flush(void __iomem *base) -{ - /* empty rx and tx fifo */ - setbits_le32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK | - UART_CTL_RSTTXFIFO_MASK); - - /* read any pending char to make sure all irq status are cleared */ - readl(base + UART_FIFO_REG); -} - -static int bcm6858_serial_init(void __iomem *base, ulong clk, u32 baudrate) -{ - u32 val; - - /* mask all irq and flush port */ - bcm6858_serial_disable(base); - bcm6858_serial_flush(base); - - /* set uart control config */ - clrsetbits_le32(base + UART_CTL_REG, - /* clear rx timeout */ - UART_CTL_RXTIMEOUT_MASK | - /* clear stop bits */ - UART_CTL_STOPBITS_MASK | - /* clear bits per symbol */ - UART_CTL_BITSPERSYM_MASK | - /* clear xmit break */ - UART_CTL_XMITBRK_MASK | - /* clear reserved bit */ - UART_CTL_RSVD_MASK | - /* disable parity */ - UART_CTL_RXPAREN_MASK | - UART_CTL_TXPAREN_MASK | - /* disable loopback */ - UART_CTL_LOOPBACK_MASK, - /* set timeout to 5 */ - UART_CTL_RXTIMEOUT_5 | - /* set 8 bits/symbol */ - UART_CTL_BITSPERSYM_8 | - /* set 1 stop bit */ - UART_CTL_STOPBITS_1 | - /* set parity to even */ - UART_CTL_RXPAREVEN_MASK | - UART_CTL_TXPAREVEN_MASK); - - /* set uart fifo config */ - clrsetbits_le32(base + UART_FIFO_CFG_REG, - /* clear fifo config */ - UART_FIFO_CFG_RX_MASK | - UART_FIFO_CFG_TX_MASK, - /* set fifo config to 4 */ - UART_FIFO_CFG_RX_4 | - UART_FIFO_CFG_TX_4); - - /* set baud rate */ - val = ((clk / baudrate) >> 4); - if (val & 0x1) - val = (val >> 1); - else - val = (val >> 1) - 1; - writel(val, base + UART_BAUD_REG); - - /* clear interrupts */ - writel(0, base + UART_IR_REG); - - /* enable uart */ - bcm6858_serial_enable(base); - - return 0; -} - -static int bcm6858_serial_pending(struct udevice *dev, bool input) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - u32 val = readl(priv->base + UART_IR_REG); - - if (input) - return !!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY)); - else - return !(val & UART_IR_STAT(UART_IR_TXEMPTY)); -} - -static int bcm6858_serial_setbrg(struct udevice *dev, int baudrate) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - - return bcm6858_serial_init(priv->base, priv->uartclk, baudrate); -} - -static int bcm6858_serial_putc(struct udevice *dev, const char ch) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - u32 val; - - val = readl(priv->base + UART_IR_REG); - if (!(val & UART_IR_STAT(UART_IR_TXEMPTY))) - return -EAGAIN; - - writel(ch, priv->base + UART_FIFO_REG); - - return 0; -} - -static int bcm6858_serial_getc(struct udevice *dev) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - u32 val; - - val = readl(priv->base + UART_IR_REG); - if (val & UART_IR_STAT(UART_IR_RXOVER)) - setbits_le32(priv->base + UART_CTL_REG, - UART_CTL_RSTRXFIFO_MASK); - - if (!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY))) - return -EAGAIN; - - val = readl(priv->base + UART_FIFO_REG); - if (val & UART_FIFO_ANYERR_MASK) - return -EAGAIN; - - return val & UART_FIFO_VALID_MASK; -} - -static int bcm6858_serial_probe(struct udevice *dev) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - struct clk clk; - int ret; - - /* get address */ - priv->base = dev_remap_addr(dev); - if (!priv->base) - return -EINVAL; - - /* get clock rate */ - ret = clk_get_by_index(dev, 0, &clk); - if (ret < 0) - return ret; - priv->uartclk = clk_get_rate(&clk); - clk_free(&clk); - - /* initialize serial */ - return bcm6858_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE); -} - -static const struct dm_serial_ops bcm6858_serial_ops = { - .putc = bcm6858_serial_putc, - .pending = bcm6858_serial_pending, - .getc = bcm6858_serial_getc, - .setbrg = bcm6858_serial_setbrg, -}; - -static const struct udevice_id bcm6858_serial_ids[] = { - { .compatible = "brcm,bcm6858-uart" }, - { /* sentinel */ } -}; - -U_BOOT_DRIVER(bcm6858_serial) = { - .name = "bcm6858-uart", - .id = UCLASS_SERIAL, - .of_match = bcm6858_serial_ids, - .probe = bcm6858_serial_probe, - .priv_auto_alloc_size = sizeof(struct bcm6858_serial_priv), - .ops = &bcm6858_serial_ops, - .flags = DM_FLAG_PRE_RELOC, -}; - -#ifdef CONFIG_DEBUG_UART_BCM6858 -static inline void _debug_uart_init(void) -{ - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; - - bcm6858_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); -} - -static inline void wait_xfered(void __iomem *base) -{ - do { - u32 val = readl(base + UART_IR_REG); - if (val & UART_IR_STAT(UART_IR_TXEMPTY)) - break; - } while (1); -} - -static inline void _debug_uart_putc(int ch) -{ - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; - - wait_xfered(base); - writel(ch, base + UART_FIFO_REG); - wait_xfered(base); -} - -DEBUG_UART_FUNCS -#endif -- 2.25.1