From e7ecbdcaa8fd5dc0cb1cc5a357500bef78e681aa Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 25 Nov 2010 11:57:57 +0000 Subject: [PATCH] handle new revisions of vlynq wrt reset sequence, patch from sn9 SVN-Revision: 24139 --- .../160-vlynq_try_remote_first.patch | 314 +++++++++++++++++- 1 file changed, 300 insertions(+), 14 deletions(-) diff --git a/target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch b/target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch index 437bc89d93..1241bda2fe 100644 --- a/target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch +++ b/target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch @@ -1,20 +1,306 @@ ---- a/drivers/vlynq/vlynq.c -+++ b/drivers/vlynq/vlynq.c -@@ -514,9 +514,14 @@ static int __vlynq_enable_device(struct - !__vlynq_try_external(dev)) - return 0; +Index: linux-2.6.32.26/drivers/vlynq/vlynq.c +=================================================================== +--- linux-2.6.32.26.orig/drivers/vlynq/vlynq.c 2010-11-24 13:01:20.459985351 -0800 ++++ linux-2.6.32.26/drivers/vlynq/vlynq.c 2010-11-24 13:01:43.537494084 -0800 +@@ -103,6 +103,12 @@ + } + #endif + ++u32 __vlynq_rev_reg(struct vlynq_regs *regs) ++{ ++ return readl(®s->revision); ++} ++EXPORT_SYMBOL(__vlynq_rev_reg); ++ + /* Check the VLYNQ link status with a given device */ + static int vlynq_linked(struct vlynq_device *dev) + { +@@ -117,20 +123,43 @@ + return 0; + } + ++static volatile int vlynq_delay_value_new = 0; ++ ++static void vlynq_delay_wait(u32 count) ++{ ++ /* Code adopted from original vlynq driver */ ++ int i = 0; ++ volatile int *ptr = &vlynq_delay_value_new; ++ *ptr = 0; ++ ++ /* We are assuming that the each cycle takes about ++ * 23 assembly instructions. */ ++ for(i = 0; i < (count + 23)/23; i++) ++ *ptr = *ptr + 1; ++} ++ + static void vlynq_reset(struct vlynq_device *dev) + { ++ u32 rtm = readl(&dev->local->revision); ++ ++ if (rtm < 0x00010200) ++ return; ++ ++ rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ? ++ 0 : 0x600000; ++ + writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET, + &dev->local->control); + + /* Wait for the devices to finish resetting */ +- msleep(5); ++ vlynq_delay_wait(0xffffff); + + /* Remove reset bit */ +- writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET, ++ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm, + &dev->local->control); + + /* Give some time for the devices to settle */ +- msleep(5); ++ vlynq_delay_wait(0xffffff); + } + + static void vlynq_irq_unmask(unsigned int irq) +@@ -379,6 +408,62 @@ + } + EXPORT_SYMBOL(vlynq_unregister_driver); + ++enum vlynq_clk_src { ++ vlynq_clk_external, ++ vlynq_clk_local, ++ vlynq_clk_remote, ++ vlynq_clk_invalid, ++}; ++ ++static int __vlynq_set_clocks(struct vlynq_device *dev, ++ enum vlynq_clk_src clk_dir, ++ int lclk_div, int rclk_div) ++{ ++ u32 reg; ++ ++ if (clk_dir == vlynq_clk_invalid) { ++ printk(KERN_ERR "%s: attempt to set invalid clocking\n", ++ dev_name(&dev->dev)); ++ return -EINVAL; ++ } ++ ++ printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n", ++ dev_name(&dev->dev), readl(&dev->local->revision)); ++ ++ reg = readl(&dev->local->control); ++ if (readl(&dev->local->revision) < 0x00010205) { ++ if (clk_dir & vlynq_clk_local) ++ reg |= VLYNQ_CTRL_CLOCK_INT; ++ else ++ reg &= ~VLYNQ_CTRL_CLOCK_INT; ++ } ++ reg &= ~VLYNQ_CTRL_CLOCK_MASK; ++ reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div); ++ writel(reg, &dev->local->control); ++ ++ if (!vlynq_linked(dev)) ++ return -ENODEV; ++ ++ printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n", ++ dev_name(&dev->dev), readl(&dev->remote->revision)); ++ ++ reg = readl(&dev->remote->control); ++ if (readl(&dev->remote->revision) < 0x00010205) { ++ if (clk_dir & vlynq_clk_remote) ++ reg |= VLYNQ_CTRL_CLOCK_INT; ++ else ++ reg &= ~VLYNQ_CTRL_CLOCK_INT; ++ } ++ reg &= ~VLYNQ_CTRL_CLOCK_MASK; ++ reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div); ++ writel(reg, &dev->remote->control); ++ ++ if (!vlynq_linked(dev)) ++ return -ENODEV; ++ ++ return 0; ++} ++ + /* + * A VLYNQ remote device can clock the VLYNQ bus master + * using a dedicated clock line. In that case, both the +@@ -392,29 +477,15 @@ + int i; + + vlynq_reset(dev); +- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ? +- i <= vlynq_rdiv8 : i >= vlynq_rdiv2; +- dev->dev_id ? i++ : i--) { +- ++ for (i = 0; i <= 7; i++) { + if (!vlynq_linked(dev)) + break; + +- writel((readl(&dev->remote->control) & +- ~VLYNQ_CTRL_CLOCK_MASK) | +- VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), +- &dev->remote->control); +- writel((readl(&dev->local->control) +- & ~(VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_MASK)) | +- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), +- &dev->local->control); +- +- if (vlynq_linked(dev)) { ++ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) { + printk(KERN_DEBUG +- "%s: using remote clock divisor %d\n", +- dev_name(&dev->dev), i - vlynq_rdiv1 + 1); +- dev->divisor = i; ++ "%s: using remote clock divisor %d\n", ++ dev_name(&dev->dev), i + 1); ++ dev->divisor = i + vlynq_rdiv1; + return 0; } else { + vlynq_reset(dev); +@@ -437,21 +508,12 @@ + + vlynq_reset(dev); + +- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ? +- i <= vlynq_ldiv8 : i >= vlynq_ldiv2; +- dev->dev_id ? i++ : i--) { +- +- writel((readl(&dev->local->control) & +- ~VLYNQ_CTRL_CLOCK_MASK) | +- VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1), +- &dev->local->control); +- +- if (vlynq_linked(dev)) { ++ for (i = 0; i <= 7; i++) { ++ if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) { + printk(KERN_DEBUG +- "%s: using local clock divisor %d\n", +- dev_name(&dev->dev), i - vlynq_ldiv1 + 1); +- dev->divisor = i; ++ "%s: using local clock divisor %d\n", ++ dev_name(&dev->dev), i + 1); ++ dev->divisor = i + vlynq_ldiv1; + return 0; + } else { + vlynq_reset(dev); +@@ -473,18 +535,10 @@ + if (!vlynq_linked(dev)) + return -ENODEV; + +- writel((readl(&dev->remote->control) & +- ~VLYNQ_CTRL_CLOCK_INT), +- &dev->remote->control); +- +- writel((readl(&dev->local->control) & +- ~VLYNQ_CTRL_CLOCK_INT), +- &dev->local->control); +- +- if (vlynq_linked(dev)) { ++ if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) { + printk(KERN_DEBUG "%s: using external clock\n", +- dev_name(&dev->dev)); +- dev->divisor = vlynq_div_external; ++ dev_name(&dev->dev)); ++ dev->divisor = vlynq_div_external; + return 0; + } + +@@ -507,18 +561,9 @@ + * generation negotiated by hardware. + * Check which device is generating clocks and perform setup + * accordingly */ +- if (vlynq_linked(dev) && readl(&dev->remote->control) & +- VLYNQ_CTRL_CLOCK_INT) { +- if (!__vlynq_try_remote(dev) || +- !__vlynq_try_local(dev) || +- !__vlynq_try_external(dev)) +- return 0; +- } else { - if (!__vlynq_try_external(dev) || - !__vlynq_try_local(dev) || - !__vlynq_try_remote(dev)) -+ /* XXX: I don't really know what difference it makes, if the order -+ * of the following calls is changed, but at least in this order -+ * my fritzbox doesn't hang at startup as in -+ * https://dev.openwrt.org/ticket/7324 -+ */ -+ if (!__vlynq_try_remote(dev) || -+ !__vlynq_try_local(dev) || -+ !__vlynq_try_external(dev)) - return 0; +- return 0; +- } ++ if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev) || ++ !__vlynq_try_external(dev)) ++ return 0; + break; + case vlynq_ldiv1: + case vlynq_ldiv2: +@@ -528,15 +573,12 @@ + case vlynq_ldiv6: + case vlynq_ldiv7: + case vlynq_ldiv8: +- writel(VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_DIV(dev->divisor - +- vlynq_ldiv1), &dev->local->control); +- writel(0, &dev->remote->control); +- if (vlynq_linked(dev)) { ++ if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor - ++ vlynq_ldiv1, 0)) { + printk(KERN_DEBUG +- "%s: using local clock divisor %d\n", +- dev_name(&dev->dev), +- dev->divisor - vlynq_ldiv1 + 1); ++ "%s: using local clock divisor %d\n", ++ dev_name(&dev->dev), ++ dev->divisor - vlynq_ldiv1 + 1); + return 0; + } + break; +@@ -548,15 +590,12 @@ + case vlynq_rdiv6: + case vlynq_rdiv7: + case vlynq_rdiv8: +- writel(0, &dev->local->control); +- writel(VLYNQ_CTRL_CLOCK_INT | +- VLYNQ_CTRL_CLOCK_DIV(dev->divisor - +- vlynq_rdiv1), &dev->remote->control); +- if (vlynq_linked(dev)) { ++ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0, ++ dev->divisor - vlynq_rdiv1)) { + printk(KERN_DEBUG +- "%s: using remote clock divisor %d\n", +- dev_name(&dev->dev), +- dev->divisor - vlynq_rdiv1 + 1); ++ "%s: using remote clock divisor %d\n", ++ dev_name(&dev->dev), ++ dev->divisor - vlynq_rdiv1 + 1); + return 0; } break; +@@ -732,13 +771,13 @@ + platform_set_drvdata(pdev, dev); + + printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n", +- dev_name(&dev->dev), (void *)dev->regs_start, dev->irq, +- (void *)dev->mem_start); ++ dev_name(&dev->dev), (void *)dev->regs_start, ++ dev->irq, (void *)dev->mem_start); + +- dev->dev_id = 0; + dev->divisor = vlynq_div_auto; +- result = __vlynq_enable_device(dev); +- if (result == 0) { ++ if (__vlynq_enable_device(dev)) ++ dev->dev_id = 0; ++ else { + dev->dev_id = readl(&dev->remote->chip); + ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev); + } +Index: linux-2.6.32.26/include/linux/vlynq.h +=================================================================== +--- linux-2.6.32.26.orig/include/linux/vlynq.h 2010-11-24 13:07:33.297487888 -0800 ++++ linux-2.6.32.26/include/linux/vlynq.h 2010-11-24 13:08:44.107488596 -0800 +@@ -98,6 +98,7 @@ + + extern struct bus_type vlynq_bus_type; + ++extern u32 __vlynq_rev_reg(struct vlynq_regs *regs); + extern int __vlynq_register_driver(struct vlynq_driver *driver, + struct module *owner); + -- 2.25.1