From e73fda83111ce7f043be3028b440e8ba96cbf639 Mon Sep 17 00:00:00 2001 From: Eric Andersen Date: Fri, 1 Dec 2000 22:59:04 +0000 Subject: [PATCH] Update for handling .udebs and building using a pristine source dir... --- debian/Config.h-deb | 339 ++++++++++++++++++++++++++++++++++++++++++ debian/Config.h-udeb | 340 +++++++++++++++++++++++++++++++++++++++++++ debian/changelog | 8 +- debian/control | 9 +- debian/rules | 173 ++++++++++++---------- 5 files changed, 781 insertions(+), 88 deletions(-) create mode 100644 debian/Config.h-deb create mode 100644 debian/Config.h-udeb diff --git a/debian/Config.h-deb b/debian/Config.h-deb new file mode 100644 index 000000000..10264d638 --- /dev/null +++ b/debian/Config.h-deb @@ -0,0 +1,339 @@ +/* vi: set sw=4 ts=4: */ +// This file defines the feature set to be compiled into busybox. +// When you turn things off here, they won't be compiled in at all. +// +//// This file is parsed by sed. You MUST use single line comments. +// i.e. //#define BB_BLAH +// +// +// BusyBox Applications +#define BB_AR +#define BB_BASENAME +#define BB_CAT +#define BB_CHMOD_CHOWN_CHGRP +#define BB_CHROOT +#define BB_CHVT +#define BB_CLEAR +#define BB_CMP +#define BB_CP_MV +#define BB_CUT +#define BB_DATE +#define BB_DC +#define BB_DD +#define BB_DEALLOCVT +#define BB_DF +#define BB_DIRNAME +#define BB_DMESG +#define BB_DOS2UNIX +#define BB_DUTMP +#define BB_DU +#define BB_DUMPKMAP +#define BB_ECHO +#define BB_EXPR +#define BB_FBSET +#define BB_FDFLUSH +#define BB_FIND +#define BB_FREE +#define BB_FREERAMDISK +#define BB_FSCK_MINIX +#define BB_GETOPT +#define BB_GREP +#define BB_GUNZIP +#define BB_GZIP +#define BB_HALT +#define BB_HEAD +#define BB_HOSTID +#define BB_HOSTNAME +#define BB_ID +#define BB_INIT +#define BB_INSMOD +#define BB_KILL +#define BB_KILLALL +#define BB_LENGTH +#define BB_LN +#define BB_LOADACM +#define BB_LOADFONT +#define BB_LOADKMAP +#define BB_LOGGER +#define BB_LOGNAME +#define BB_LS +#define BB_LSMOD +#define BB_MAKEDEVS +#define BB_MD5SUM +#define BB_MKDIR +#define BB_MKFIFO +#define BB_MKFS_MINIX +#define BB_MKNOD +#define BB_MKSWAP +#define BB_MKTEMP +#define BB_NC +#define BB_MORE +#define BB_MOUNT +#define BB_MT +#define BB_NSLOOKUP +#define BB_PING +#define BB_POWEROFF +#define BB_PRINTF +#define BB_PS +#define BB_PWD +#define BB_RDATE +#define BB_READLINK +#define BB_REBOOT +#define BB_RENICE +#define BB_RESET +#define BB_RM +#define BB_RMDIR +#define BB_RMMOD +#define BB_RPMUNPACK +#define BB_SED +#define BB_SETKEYCODES +#define BB_SH +#define BB_SLEEP +#define BB_SORT +#define BB_SWAPONOFF +#define BB_SYNC +#define BB_SYSLOGD +#define BB_TAIL +#define BB_TAR +#define BB_TEE +#define BB_TEST +#define BB_TELNET +#define BB_TOUCH +#define BB_TR +#define BB_TRUE_FALSE +#define BB_TTY +#define BB_UPTIME +#define BB_USLEEP +#define BB_WC +#define BB_WGET +#define BB_WHICH +#define BB_WHOAMI +#define BB_UUENCODE +#define BB_UUDECODE +#define BB_UMOUNT +#define BB_UNIQ +#define BB_UNAME +#define BB_UNIX2DOS +#define BB_UPDATE +#define BB_XARGS +#define BB_YES +// End of Applications List +// +// +// +// --------------------------------------------------------- +// This is where feature definitions go. Generally speaking, +// turning this stuff off makes things a bit smaller (and less +// pretty/useful). +// +// +// +// Turn this on to use Erik's very cool devps, and devmtab kernel drivers, +// thereby eliminating the need for the /proc filesystem and thereby saving +// lots and lots memory for more important things. You can not use this and +// USE_PROCFS at the same time... NOTE: If you enable this feature, you +// _must_ have patched the kernel to include the devps patch that is included +// in the busybox/kernel-patches directory. You will also need to create some +// device special files in /dev on your embedded system: +// mknod /dev/mtab c 10 22 +// mknod /dev/ps c 10 21 +// I emailed Linus and this patch will not be going into the stock kernel. +//#define BB_FEATURE_USE_DEVPS_PATCH +// +// enable features that use the /proc filesystem (apps that +// break without this will tell you on compile)... +// You can't use this and BB_FEATURE_USE_DEVPS_PATCH +// at the same time... +#define BB_FEATURE_USE_PROCFS +// +// This compiles out everything but the most +// trivial --help usage information (i.e. reduces binary size) +//#define BB_FEATURE_TRIVIAL_HELP +// +// Use termios to manipulate the screen ('more' is prettier with this on) +#define BB_FEATURE_USE_TERMIOS +// +// calculate terminal & column widths (for more and ls) +#define BB_FEATURE_AUTOWIDTH +// +// show username/groupnames (bypasses libc6 NSS) for ls +#define BB_FEATURE_LS_USERNAME +// +// show file timestamps in ls +#define BB_FEATURE_LS_TIMESTAMPS +// +// enable ls -p and -F +#define BB_FEATURE_LS_FILETYPES +// +// sort the file names (still a bit buggy) +#define BB_FEATURE_LS_SORTFILES +// +// enable ls -R +#define BB_FEATURE_LS_RECURSIVE +// +// enable ls -L +#define BB_FEATURE_LS_FOLLOWLINKS +// +// Change ping implementation -- simplified, featureless, but really small. +//#define BB_FEATURE_SIMPLE_PING +// +// Make init use a simplified /etc/inittab file (recommended). +//#define BB_FEATURE_USE_INITTAB +// +//Enable init being called as /linuxrc +#define BB_FEATURE_LINUXRC +// +//Have init enable core dumping for child processes (for debugging only) +//#define BB_FEATURE_INIT_COREDUMPS +// +// Allow init to permenently chroot, and umount the old root fs +// just like an initrd does. Requires a kernel patch by Werner Almesberger. +// ftp://icaftp.epfl.ch/pub/people/almesber/misc/umount-root-*.tar.gz +//#define BB_FEATURE_INIT_CHROOT +// +//Make sure nothing is printed to the console on boot +//#define BB_FEATURE_EXTRA_QUIET +// +//Should syslogd also provide klogd support? +#define BB_FEATURE_KLOGD +// +// enable syslogd -R remotehost +#define BB_FEATURE_REMOTE_LOG +// +//Simple tail implementation (2.34k vs 3k for the full one). +//Both provide 'tail -f' support (only one file at a time.) +#define BB_FEATURE_SIMPLE_TAIL +// +// Enable support for loop devices in mount +#define BB_FEATURE_MOUNT_LOOP +// +// Enable support for a real /etc/mtab file instead of /proc/mounts +//#define BB_FEATURE_MOUNT_MTAB_SUPPORT +// +// Enable support for mounting remote NFS volumes +#define BB_FEATURE_NFSMOUNT +// +// Enable support forced filesystem unmounting +// (i.e. in case of an unreachable NFS system). +#define BB_FEATURE_MOUNT_FORCE +// +// Enable support for creation of tar files. +#define BB_FEATURE_TAR_CREATE +// +// Enable support for "--exclude" for excluding files +#define BB_FEATURE_TAR_EXCLUDE +// +//// Enable reverse sort +#define BB_FEATURE_SORT_REVERSE +// +// Enable command line editing in the shell +#define BB_FEATURE_SH_COMMAND_EDITING +// +//Allow the shell to invoke all the compiled in BusyBox commands as if they +//were shell builtins. Nice for staticly linking an emergency rescue shell +//among other thing. +#define BB_FEATURE_SH_STANDALONE_SHELL +// +//When this is enabled, busybox shell builtins can be called using full path +//names. This causes builtins (i.e. every single busybox command) to override +//real commands on the filesystem. For example, if you run run /bin/cat, it +//will use BusyBox cat even if /bin/cat exists on the filesystem and is _not_ +//busybox. Some systems want this, others do not. Choose wisely. :-) This +//only has meaning when BB_FEATURE_SH_STANDALONE_SHELL is enabled. +#define BB_FEATURE_SH_BUILTINS_ALWAYS_WIN +// +// Enable tab completion in the shell (not yet +// working very well -- so don't turn this on) +//#define BB_FEATURE_SH_TAB_COMPLETION +// +//Turn on extra fbset options +//#define BB_FEATURE_FBSET_FANCY +// +//Turn on fbset readmode support +//#define BB_FEATURE_FBSET_READMODE +// +// You must enable one or both of these features +// Support installing modules from pre 2.1 kernels +//#define BB_FEATURE_INSMOD_OLD_KERNEL +// Support installing modules from kernel versions after 2.1.18 +#define BB_FEATURE_INSMOD_NEW_KERNEL +// +// Support module version checking +//#define BB_FEATURE_INSMOD_VERSION_CHECKING +// +// Support for Minix filesystem, version 2 +//#define BB_FEATURE_MINIX2 +// +// +// Enable busybox --install [-s] +// to create links (or symlinks) for all the commands that are +// compiled into the binary. (needs /proc filesystem) +#define BB_FEATURE_INSTALLER +// +// Enable a nifty progress meter in wget (adds just under 2k) +#define BB_FEATURE_STATUSBAR +// +// Clean up all memory before exiting -- usually not needed +// as the OS can clean up... Don't enable this unless you +// have a really good reason for cleaning things up manually. +//#define BB_FEATURE_CLEAN_UP +// +// End of Features List +// +// +// +// +// +// +//--------------------------------------------------- +// Nothing beyond this point should ever be touched by +// mere mortals so leave this stuff alone. +// +#ifdef BB_FEATURE_MOUNT_MTAB_SUPPORT +#define BB_MTAB +#endif +// +#if defined BB_FEATURE_SH_COMMAND_EDITING && defined BB_SH +#define BB_CMDEDIT +#endif +// +#ifdef BB_KILLALL +#ifndef BB_KILL +#define BB_KILL +#endif +#endif +// +#ifdef BB_FEATURE_LINUXRC +#ifndef BB_INIT +#define BB_INIT +#endif +#define BB_LINUXRC +#endif +// +#ifdef BB_GZIP +#ifndef BB_GUNZIP +#define BB_GUNZIP +#endif +#endif +// +#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT +#define BB_NFSMOUNT +#endif +// +#if defined BB_FEATURE_SH_COMMAND_EDITING +#ifndef BB_FEATURE_USE_TERMIOS +#define BB_FEATURE_USE_TERMIOS +#endif +#endif +// +#if defined BB_FEATURE_AUTOWIDTH +#ifndef BB_FEATURE_USE_TERMIOS +#define BB_FEATURE_USE_TERMIOS +#endif +#endif +// +#if defined BB_INSMOD +#ifndef BB_FEATURE_INSMOD_OLD_KERNEL +#define BB_FEATURE_INSMOD_NEW_KERNEL +#endif +#endif diff --git a/debian/Config.h-udeb b/debian/Config.h-udeb new file mode 100644 index 000000000..fa8cbdd10 --- /dev/null +++ b/debian/Config.h-udeb @@ -0,0 +1,340 @@ +/* vi: set sw=4 ts=4: */ +// This file defines the feature set to be compiled into busybox. +// When you turn things off here, they won't be compiled in at all. +// +//// This file is parsed by sed. You MUST use single line comments. +// i.e. //#define BB_BLAH +// +// +// BusyBox Applications +#define BB_AR +#define BB_BASENAME +#define BB_CAT +#define BB_CHMOD_CHOWN_CHGRP +#define BB_CHROOT +//#define BB_CHVT +#define BB_CLEAR +//#define BB_CMP +#define BB_CP_MV +#define BB_CUT +#define BB_DATE +//#define BB_DC +#define BB_DD +//#define BB_DEALLOCVT +#define BB_DF +#define BB_DIRNAME +#define BB_DMESG +//#define BB_DOS2UNIX +//#define BB_DUTMP +#define BB_DU +//#define BB_DUMPKMAP +#define BB_ECHO +//#define BB_EXPR +#define BB_FBSET +//#define BB_FDFLUSH +#define BB_FIND +#define BB_FREE +#define BB_FREERAMDISK +//#define BB_FSCK_MINIX +//#define BB_GETOPT +#define BB_GREP +#define BB_GUNZIP +#define BB_GZIP +#define BB_HALT +#define BB_HEAD +#define BB_HOSTID +#define BB_HOSTNAME +#define BB_ID +#define BB_INIT +//#define BB_INSMOD +#define BB_KILL +#define BB_KILLALL +//#define BB_LENGTH +#define BB_LN +//#define BB_LOADACM +//#define BB_LOADFONT +//#define BB_LOADKMAP +#define BB_LOGGER +//#define BB_LOGNAME +#define BB_LS +//#define BB_LSMOD +//#define BB_MAKEDEVS +//#define BB_MD5SUM +#define BB_MKDIR +//#define BB_MKFIFO +//#define BB_MKFS_MINIX +#define BB_MKNOD +#define BB_MKSWAP +#define BB_MKTEMP +//#define BB_NC +#define BB_MORE +#define BB_MOUNT +//#define BB_MT +#define BB_NSLOOKUP +#define BB_PING +#define BB_POWEROFF +//#define BB_PRINTF +#define BB_PS +#define BB_PWD +//#define BB_RDATE +//#define BB_READLINK +#define BB_REBOOT +//#define BB_RENICE +#define BB_RESET +#define BB_RM +#define BB_RMDIR +//#define BB_RMMOD +//#define BB_RPMUNPACK +#define BB_SED +//#define BB_SETKEYCODES +//#define BB_SH +#define BB_SLEEP +//#define BB_SORT +#define BB_SWAPONOFF +#define BB_SYNC +#define BB_SYSLOGD +#define BB_TAIL +#define BB_TAR +//#define BB_TEE +//#define BB_TEST +//#define BB_TELNET +#define BB_TOUCH +//#define BB_TR +#define BB_TRUE_FALSE +//#define BB_TTY +#define BB_UPTIME +//#define BB_USLEEP +//#define BB_WC +#define BB_WGET +#define BB_WHICH +#define BB_WHOAMI +//#define BB_UUENCODE +//#define BB_UUDECODE +#define BB_UMOUNT +//#define BB_UNIQ +#define BB_UNAME +//#define BB_UNIX2DOS +//#define BB_UPDATE +#define BB_XARGS +#define BB_YES +// End of Applications List +// +// +// +// --------------------------------------------------------- +// This is where feature definitions go. Generally speaking, +// turning this stuff off makes things a bit smaller (and less +// pretty/useful). +// +// +// +// Turn this on to use Erik's very cool devps, and devmtab kernel drivers, +// thereby eliminating the need for the /proc filesystem and thereby saving +// lots and lots memory for more important things. You can not use this and +// USE_PROCFS at the same time... NOTE: If you enable this feature, you +// _must_ have patched the kernel to include the devps patch that is included +// in the busybox/kernel-patches directory. You will also need to create some +// device special files in /dev on your embedded system: +// mknod /dev/mtab c 10 22 +// mknod /dev/ps c 10 21 +// I emailed Linus and this patch will not be going into the stock kernel. +//#define BB_FEATURE_USE_DEVPS_PATCH +// +// enable features that use the /proc filesystem (apps that +// break without this will tell you on compile)... +// You can't use this and BB_FEATURE_USE_DEVPS_PATCH +// at the same time... +#define BB_FEATURE_USE_PROCFS +// +// This compiles out everything but the most +// trivial --help usage information (i.e. reduces binary size) +#define BB_FEATURE_TRIVIAL_HELP +// +// Use termios to manipulate the screen ('more' is prettier with this on) +#define BB_FEATURE_USE_TERMIOS +// +// calculate terminal & column widths (for more and ls) +#define BB_FEATURE_AUTOWIDTH +// +// show username/groupnames (bypasses libc6 NSS) for ls +#define BB_FEATURE_LS_USERNAME +// +// show file timestamps in ls +#define BB_FEATURE_LS_TIMESTAMPS +// +// enable ls -p and -F +#define BB_FEATURE_LS_FILETYPES +// +// sort the file names +#define BB_FEATURE_LS_SORTFILES +// +// enable ls -R +#define BB_FEATURE_LS_RECURSIVE +// +// enable ls -L +#define BB_FEATURE_LS_FOLLOWLINKS +// +// Change ping implementation -- simplified, featureless, but really small. +//#define BB_FEATURE_SIMPLE_PING +// +// Make init use a simplified /etc/inittab file (recommended). +#define BB_FEATURE_USE_INITTAB +// +//Enable init being called as /linuxrc +#define BB_FEATURE_LINUXRC +// +//Have init enable core dumping for child processes (for debugging only) +//#define BB_FEATURE_INIT_COREDUMPS +// +// Allow init to permenently chroot, and umount the old root fs +// just like an initrd does. Requires a kernel patch by Werner Almesberger. +// ftp://icaftp.epfl.ch/pub/people/almesber/misc/umount-root-*.tar.gz +//#define BB_FEATURE_INIT_CHROOT +// +//Make sure nothing is printed to the console on boot +//#define BB_FEATURE_EXTRA_QUIET +// +//Should syslogd also provide klogd support? +#define BB_FEATURE_KLOGD +// +// enable syslogd -R remotehost +//#define BB_FEATURE_REMOTE_LOG +// +//Simple tail implementation (2.34k vs 3k for the full one). +//Both provide 'tail -f' support (only one file at a time.) +#define BB_FEATURE_SIMPLE_TAIL +// +// Enable support for loop devices in mount +#define BB_FEATURE_MOUNT_LOOP +// +// Enable support for a real /etc/mtab file instead of /proc/mounts +//#define BB_FEATURE_MOUNT_MTAB_SUPPORT +// +// Enable support for mounting remote NFS volumes. +// You may no -o nolock if no local portmapper is running. +#define BB_FEATURE_NFSMOUNT +// +// Enable support forced filesystem unmounting +// (i.e. in case of an unreachable NFS system). +#define BB_FEATURE_MOUNT_FORCE +// +// Enable support for creation of tar files. +//#define BB_FEATURE_TAR_CREATE +// +// Enable support for "--exclude" for excluding files +//#define BB_FEATURE_TAR_EXCLUDE +// +//// Enable reverse sort +//#define BB_FEATURE_SORT_REVERSE +// +// Enable command line editing in the shell +//#define BB_FEATURE_SH_COMMAND_EDITING +// +//Allow the shell to invoke all the compiled in BusyBox commands as if they +//were shell builtins. Nice for staticly linking an emergency rescue shell +//among other thing. +//#define BB_FEATURE_SH_STANDALONE_SHELL +// +//When this is enabled, busybox shell builtins can be called using full path +//names. This causes builtins (i.e. every single busybox command) to override +//real commands on the filesystem. For example, if you run run /bin/cat, it +//will use BusyBox cat even if /bin/cat exists on the filesystem and is _not_ +//busybox. Some systems want this, others do not. Choose wisely. :-) This +//only has meaning when BB_FEATURE_SH_STANDALONE_SHELL is enabled. +//#define BB_FEATURE_SH_BUILTINS_ALWAYS_WIN +// +// Enable tab completion in the shell (not yet +// working very well -- so don't turn this on) +//#define BB_FEATURE_SH_TAB_COMPLETION +// +//Turn on extra fbset options +//#define BB_FEATURE_FBSET_FANCY +// +//Turn on fbset readmode support +//#define BB_FEATURE_FBSET_READMODE +// +// You must enable one or both of these features +// Support installing modules from pre 2.1 kernels +//#define BB_FEATURE_INSMOD_OLD_KERNEL +// Support installing modules from kernel versions after 2.1.18 +//#define BB_FEATURE_INSMOD_NEW_KERNEL +// +// Support module version checking +//#define BB_FEATURE_INSMOD_VERSION_CHECKING +// +// Support for Minix filesystem, version 2 +//#define BB_FEATURE_MINIX2 +// +// +// Enable busybox --install [-s] +// to create links (or symlinks) for all the commands that are +// compiled into the binary. (needs /proc filesystem) +//#define BB_FEATURE_INSTALLER +// +// Enable a nifty progress meter in wget (adds just under 2k) +#define BB_FEATURE_STATUSBAR +// +// Clean up all memory before exiting -- usually not needed +// as the OS can clean up... Don't enable this unless you +// have a really good reason for cleaning things up manually. +//#define BB_FEATURE_CLEAN_UP +// +// End of Features List +// +// +// +// +// +// +//--------------------------------------------------- +// Nothing beyond this point should ever be touched by +// mere mortals so leave this stuff alone. +// +#ifdef BB_FEATURE_MOUNT_MTAB_SUPPORT +#define BB_MTAB +#endif +// +#if defined BB_FEATURE_SH_COMMAND_EDITING && defined BB_SH +#define BB_CMDEDIT +#endif +// +#ifdef BB_KILLALL +#ifndef BB_KILL +#define BB_KILL +#endif +#endif +// +#ifdef BB_FEATURE_LINUXRC +#ifndef BB_INIT +#define BB_INIT +#endif +#define BB_LINUXRC +#endif +// +#ifdef BB_GZIP +#ifndef BB_GUNZIP +#define BB_GUNZIP +#endif +#endif +// +#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT +#define BB_NFSMOUNT +#endif +// +#if defined BB_FEATURE_SH_COMMAND_EDITING +#ifndef BB_FEATURE_USE_TERMIOS +#define BB_FEATURE_USE_TERMIOS +#endif +#endif +// +#if defined BB_FEATURE_AUTOWIDTH +#ifndef BB_FEATURE_USE_TERMIOS +#define BB_FEATURE_USE_TERMIOS +#endif +#endif +// +#if defined BB_INSMOD +#ifndef BB_FEATURE_INSMOD_OLD_KERNEL +#define BB_FEATURE_INSMOD_NEW_KERNEL +#endif +#endif diff --git a/debian/changelog b/debian/changelog index 3300927e8..89c9167c6 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,10 +1,12 @@ busybox (0.48pre-1) unstable; urgency=low - * Non-release. + * Now includes .udeb support for the debian-installer -- note that this + is not really a released version of BusyBox (though the code is quite + solid). I'm just getting the .udeb support out there to facilitate + further work on the debian-installer. * See changelog for details. - * Now includes .udeb support for the debian-installer. - -- Erik Andersen Mon, 25 Sep 2000 23:00:56 -0600 + -- Erik Andersen Fri, 1 Dec 2000 15:39:30 -0700 busybox (0.47-1) unstable; urgency=low diff --git a/debian/control b/debian/control index 54475b799..5a662419f 100644 --- a/debian/control +++ b/debian/control @@ -48,7 +48,7 @@ Package: busybox-udeb Architecture: any Depends: ${shlibs:Depends} Section: debian-installer -Description: Tiny utilities for the debian-installer and for embedded systems. +Description: Tiny utilities for the debian-installer BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for the most common utilities you would usually find on your desktop system (i.e. ls, cp, mv, @@ -57,8 +57,7 @@ Description: Tiny utilities for the debian-installer and for embedded systems. provide the expected functionality and behave very much like their GNU counterparts. . - BusyBox is used by the debian-installer. Installing BusyBox onto your Debian - system is not recommended, unless you are intended to make a very small - embedded system. Chances are good that for embedded systems, you will want to - recompile to only include the tools and utilities you wish to include. + busybox-udeb is used by the debian-installer, so unless you are working + on the debian-installer, this package is not for you. Installing this + on your Debian system is a very, very bad idea. You have been warned. diff --git a/debian/rules b/debian/rules index 67741b19f..d3e168631 100755 --- a/debian/rules +++ b/debian/rules @@ -1,61 +1,60 @@ #!/usr/bin/make -f # This is a bit unusual, in that I have to completely recompile everything -# twice. The first is the normal, dynamically linked package. The second is -# for the statically linked package. This file has been adjusted accordingly. +# for each package I build (obviously static and dynamic builds require +# things to be recompiled...) # This is the debhelper compatability version to use. -export DH_COMPAT=1 +#export DH_COMPAT=1 +bbbd=debian/busybox_builddir bb=debian/tmp -bbbd=debian/bb_builddir +bbsbd=debian/busybox_static_builddir bbs=debian/busybox-static -bbsbd=debian/bb-static_builddir - -#For the debian-installer .udeb package -PACKAGE=busybox-udeb -VERSION=$(shell dpkg-parsechangelog | grep ^Version: | cut -d ' ' -f 2) -ARCH=$(shell dpkg --print-architecture) -FILENAME=$(PACKAGE)_$(VERSION)_$(ARCH).udeb -PRIORITY=$(shell grep ^Priority: debian/control | cut -d ' ' -f 2) +bbubd=debian/busybox_udeb_builddir +bbu=debian/busybox-udeb clean: dh_testdir dh_testroot - rm -f build-stamp-busybox build-stamp-busybox-static + rm -f debian/build-stamp-busybox debian/build-stamp-busybox-static debian/build-stamp-busybox-udeb -$(MAKE) clean - -rm -rf $(bb) $(bbbd) $(bbs) $(bbsbd) + -rm -rf $(bb) $(bbbd) $(bbs) $(bbsbd) $(bbubd) $(bbu) dh_clean -half_clean: - dh_testdir - dh_testroot - rm -rf $(bbs) build-stamp-busybox-static - -$(MAKE) clean - -build: build-stamp-busybox -build-stamp-busybox: +build: debian/build-stamp-busybox +debian/build-stamp-busybox: dh_testdir mkdir -p $(bbbd) - cp Makefile Config.h $(bbbd) + cp Makefile $(bbbd) + cp debian/Config.h-deb $(bbbd)/Config.h (cd $(bbbd); $(MAKE) "BB_SRC_DIR=../../") - touch build-stamp-busybox + touch debian/build-stamp-busybox install: build dh_testdir dh_testroot dh_clean -k dh_installdirs - (cd $(bbbd); $(MAKE) "BB_SRC_DIR=../../" "PREFIX=../../$(bb)" install) + # Do not run 'make install', since we do not want all the symlinks. + # This just installes the busybox binary... + #(cd $(bbbd); $(MAKE) "BB_SRC_DIR=../../" "PREFIX=../../$(bb)" install) + mkdir -p $(bb)/bin/ + cp $(bbbd)/busybox $(bb)/bin/busybox + mkdir -p $(bb)/usr/share/doc/busybox/busybox.lineo.com + cp $(bbbd)/docs/busybox.lineo.com/BusyBox.html $(bb)/usr/share/doc/busybox/busybox.lineo.com/ mkdir -p $(bb)/usr/share/man/man1 - cp docs/BusyBox.1 $(bb)/usr/share/man/man1/busybox.1 + cp $(bbbd)/docs/BusyBox.1 $(bb)/usr/share/man/man1/busybox.1 # Now for the statically linked stuff -build-static: build-stamp-busybox-static -build-stamp-busybox-static: +build-static: debian/build-stamp-busybox-static +debian/build-stamp-busybox-static: dh_testdir - $(MAKE) DOSTATIC=true - touch build-stamp-busybox-static + mkdir -p $(bbsbd) + cp Makefile $(bbsbd) + cp debian/Config.h-deb $(bbsbd)/Config.h + (cd $(bbsbd); $(MAKE) DOSTATIC=true "BB_SRC_DIR=../../") + touch debian/build-stamp-busybox-static install-static: build dh_testdir @@ -64,15 +63,59 @@ install-static: build dh_installdirs # Do not run 'make install', since we do not want all the symlinks. # This just installes the busybox binary... - #$(MAKE) "PREFIX=$(bbs)" install + #(cd $(bbsbd); $(MAKE) "BB_SRC_DIR=../../" "PREFIX=../../$(bbs)" install) mkdir -p $(bbs)/bin/ - cp busybox $(bbs)/bin/busybox + cp $(bbsbd)/busybox $(bbs)/bin/busybox + mkdir -p $(bbs)/usr/share/doc/busybox-static/busybox.lineo.com + cp $(bbsbd)/docs/busybox.lineo.com/BusyBox.html $(bbs)/usr/share/doc/busybox-static/busybox.lineo.com/ mkdir -p $(bbs)/usr/share/man/man1/ - cp docs/BusyBox.1 $(bbs)/usr/share/man/man1/busybox.1 + cp $(bbsbd)/docs/BusyBox.1 $(bbs)/usr/share/man/man1/busybox.1 + +half_clean: + dh_testdir + dh_testroot + rm -rf $(bbs) debian/build-stamp-busybox-static + -$(MAKE) clean do_static: half_clean build-static install-static + +# Now for the .udeb stuff +PACKAGE=busybox +VERSION=$(shell dpkg-parsechangelog | grep ^Version: | cut -d ' ' -f 2) +ARCH=$(shell dpkg --print-architecture) +FILENAME=$(PACKAGE)_$(VERSION)_$(ARCH).udeb +PRIORITY=$(shell grep ^Priority: debian/control | cut -d ' ' -f 2) + +build-udeb: debian/build-stamp-busybox-udeb +debian/build-stamp-busybox-udeb: + dh_testdir + mkdir -p $(bbubd) + cp Makefile $(bbubd) + cp debian/Config.h-udeb $(bbubd)/Config.h + (cd $(bbubd); $(MAKE) "BB_SRC_DIR=../../") + touch debian/build-stamp-busybox-udeb + +install-udeb: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + (cd $(bbubd); $(MAKE) "BB_SRC_DIR=../../" "PREFIX=../../$(bbu)" install) + mkdir -p $(bbu)/usr/share/man/man1/ + cp $(bbubd)/docs/BusyBox.1 $(bbu)/usr/share/man/man1/busybox.1 + +three_quarter_clean: + dh_testdir + dh_testroot + rm -rf $(bbu) debian/build-stamp-busybox-udeb + -$(MAKE) clean + +do_udeb: three_quarter_clean build-udeb install-udeb + + + # Build architecture-independent files here. binary-indep: # We have nothing to do by default. @@ -85,30 +128,18 @@ busybox: install dh_testdir dh_testroot dh_installdirs - # - #Note that for busybox, we do not install any docs, - # or man apges or anything else. This is in blatent violation of every - # Debian policy out there, since this package is intended to be used - # _only_ by the debian-installer. - # - #dh_installdocs -p$@ docs/BusyBox.txt \ - # docs/BusyBox.html docs/busybox.lineo.com AUTHORS README TODO - #rm -rf $(bb)/usr/share/doc/busybox/busybox.lineo.com/CVS \ - # $(bb)/usr/share/doc/busybox/busybox.lineo.com/.cvsignore \ - # $(bb)/usr/share/doc/busybox/busybox.lineo.com/images/CVS \ - # $(bb)/usr/share/doc/busybox/busybox.lineo.com/images/.cvsignore - #dh_undocumented -p$@ - #dh_installchangelogs -p$@ Changelog + dh_installdocs -p$@ $(bbbd)/docs/BusyBox.txt \ + $(bbbd)/docs/BusyBox.html docs/style-guide.txt \ + docs/busybox.lineo.com AUTHORS README TODO + rm -rf `find $(bb) -name CVS` + rm -f `find $(bb) -name .cvsignore` + dh_installchangelogs -p$@ Changelog + dh_undocumented -p$@ dh_strip -p$@ dh_compress -p$@ dh_fixperms -p$@ dh_installdeb -p$@ dh_shlibdeps -p$@ - # - #Make _very_ sure there are no docs lurking about. - # - rm -rf $(bb)/usr/share/doc - rm -rf $(bb)/usr/share/man dh_gencontrol -p$@ dh_md5sums -p$@ dh_builddeb -p$@ @@ -119,14 +150,13 @@ busybox-static: do_static dh_testdir dh_testroot dh_installdirs - dh_installdocs -p$@ docs/BusyBox.txt \ - docs/BusyBox.html docs/busybox.lineo.com AUTHORS README TODO - rm -rf $(bbs)/usr/share/doc/busybox-static/busybox.lineo.com/CVS \ - $(bbs)/usr/share/doc/busybox-static/busybox.lineo.com/.cvsignore \ - $(bbs)/usr/share/doc/busybox-static/busybox.lineo.com/images/CVS \ - $(bbs)/usr/share/doc/busybox-static/busybox.lineo.com/images/.cvsignore - dh_undocumented -p$@ + dh_installdocs -p$@ $(bbsbd)/docs/BusyBox.txt \ + $(bbsbd)/docs/BusyBox.html docs/style-guide.txt \ + docs/busybox.lineo.com AUTHORS README TODO + rm -rf `find $(bbs) -name CVS` + rm -f `find $(bbs) -name .cvsignore` dh_installchangelogs -p$@ Changelog + dh_undocumented -p$@ dh_strip -p$@ dh_compress -p$@ dh_fixperms -p$@ @@ -139,38 +169,21 @@ busybox-static: do_static # Note that this builds a .udeb, which is not policy compliant or anything. # -busybox-udeb: install +busybox-udeb: do_udeb @echo "--- Building: $@" dh_testdir dh_testroot dh_installdirs - # - #Note that for busybox, we do not install any docs, - # or man apges or anything else. This is in blatent violation of every - # Debian policy out there, since this package is intended to be used - # _only_ by the debian-installer. - # - #dh_installdocs -p$@ docs/BusyBox.txt \ - # docs/BusyBox.html docs/busybox.lineo.com AUTHORS README TODO - #rm -rf $(bb)/usr/share/doc/busybox/busybox.lineo.com/CVS \ - # $(bb)/usr/share/doc/busybox/busybox.lineo.com/.cvsignore \ - # $(bb)/usr/share/doc/busybox/busybox.lineo.com/images/CVS \ - # $(bb)/usr/share/doc/busybox/busybox.lineo.com/images/.cvsignore - #dh_undocumented -p$@ - #dh_installchangelogs -p$@ Changelog dh_strip -p$@ dh_compress -p$@ dh_fixperms -p$@ dh_installdeb -p$@ dh_shlibdeps -p$@ - # #Make _very_ sure there are no docs lurking about. - # - rm -rf $(bb)/usr/share/doc - rm -rf $(bb)/usr/share/man - dh_gencontrol -p$@ + rm -rf $(bbu)/usr/share/man + #dh_gencontrol -p$@ # Don't write your stupid guesses to debian/files. - #dh_gencontrol -p$@ -- -fdebian/files~ + dh_gencontrol -p$@ -- -fdebian/files~ # Register file manually. dpkg-distaddfile $(FILENAME) debian-installer $(PRIORITY) dh_md5sums -p$@ -- 2.25.1