From e512c50bc9e3ef0bcf209620cabfc6ef35f22ff3 Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Fri, 13 Sep 2013 14:46:03 +0800 Subject: [PATCH] powerpc/p1010rdb: add p1010rdb-pb support with updating p1010rdb-pa - Rename old P1010RDB board as P1010RDB-PA. - Add support for new P1010RDB-PB board. - Some optimization. For more details, see board/freescale/p1010rdb/README. Signed-off-by: Shengzhou Liu [York Sun: fix conflicts in boards.cfg] Acked-by: York Sun --- board/freescale/p1010rdb/p1010rdb.c | 176 +++++++++++++++++++++++++++- boards.cfg | 42 ++++--- include/configs/P1010RDB.h | 101 +++++++++++++--- 3 files changed, 285 insertions(+), 34 deletions(-) diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index ae8ba45e69..e940d2275e 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -38,12 +38,23 @@ DECLARE_GLOBAL_DATA_PTR; enum { MUX_TYPE_IFC, MUX_TYPE_SDHC, + MUX_TYPE_SPIFLASH, + MUX_TYPE_TDM, + MUX_TYPE_CAN, + MUX_TYPE_CS0_NOR, + MUX_TYPE_CS0_NAND, +}; + +enum { + I2C_READ_BANK, + I2C_READ_PCB_VER, }; static uint sd_ifc_mux; struct cpld_data { u8 cpld_ver; /* cpld revision */ +#if defined(CONFIG_P1010RDB_PA) u8 pcba_ver; /* pcb revision number */ u8 twindie_ddr3; u8 res1[6]; @@ -58,6 +69,9 @@ struct cpld_data { u8 por1; /* POR Options */ u8 por2; /* POR Options */ u8 por3; /* POR Options */ +#elif defined(CONFIG_P1010RDB_PB) + u8 rom_loc; +#endif }; int board_early_init_f(void) @@ -116,6 +130,9 @@ int config_board_mux(int ctrl_type) ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u8 tmp; +#if defined(CONFIG_P1010RDB_PA) + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + switch (ctrl_type) { case MUX_TYPE_IFC: i2c_set_bus_num(I2C_PCA9557_BUS_NUM); @@ -136,25 +153,171 @@ int config_board_mux(int ctrl_type) clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK, PMUXCR1_SDHC_ENABLE); break; + case MUX_TYPE_SPIFLASH: + out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH); + break; + case MUX_TYPE_TDM: + out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM); + out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC); + break; + case MUX_TYPE_CAN: + out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART); + break; default: break; } +#elif defined(CONFIG_P1010RDB_PB) + uint orig_bus = i2c_get_bus_num(); + i2c_set_bus_num(I2C_PCA9557_BUS_NUM); + switch (ctrl_type) { + case MUX_TYPE_IFC: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + clrbits_8(&tmp, 0x04); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x04); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + sd_ifc_mux = MUX_TYPE_IFC; + clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK); + break; + case MUX_TYPE_SDHC: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + setbits_8(&tmp, 0x04); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x04); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + sd_ifc_mux = MUX_TYPE_SDHC; + clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK, + PMUXCR1_SDHC_ENABLE); + break; + case MUX_TYPE_SPIFLASH: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + clrbits_8(&tmp, 0x80); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x80); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + case MUX_TYPE_TDM: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + setbits_8(&tmp, 0x82); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x82); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + case MUX_TYPE_CAN: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + clrbits_8(&tmp, 0x02); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x02); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + case MUX_TYPE_CS0_NOR: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + clrbits_8(&tmp, 0x08); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x08); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + case MUX_TYPE_CS0_NAND: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + setbits_8(&tmp, 0x08); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x08); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + default: + break; + } + i2c_set_bus_num(orig_bus); +#endif return 0; } +#ifdef CONFIG_P1010RDB_PB +int i2c_pca9557_read(int type) +{ + u8 val; + + i2c_set_bus_num(I2C_PCA9557_BUS_NUM); + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &val, 1); + + switch (type) { + case I2C_READ_BANK: + val = (val & 0x10) >> 4; + break; + case I2C_READ_PCB_VER: + val = ((val & 0x60) >> 5) + 1; + break; + default: + break; + } + + return val; +} +#endif + int checkboard(void) { struct cpu_type *cpu; + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + u8 val; cpu = gd->arch.cpu; - printf("Board: %sRDB\n", cpu->name); +#if defined(CONFIG_P1010RDB_PA) + printf("Board: %sRDB-PA, ", cpu->name); +#elif defined(CONFIG_P1010RDB_PB) + printf("Board: %sRDB-PB, ", cpu->name); + i2c_set_bus_num(I2C_PCA9557_BUS_NUM); + i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE); + val = 0x0; /* no polarity inversion */ + i2c_write(I2C_PCA9557_ADDR2, 2, 1, &val, 1); +#endif #ifdef CONFIG_SDCARD /* switch to IFC to read info from CPLD */ config_board_mux(MUX_TYPE_IFC); #endif +#if defined(CONFIG_P1010RDB_PA) + val = (in_8(&cpld_data->pcba_ver) & 0xf); + printf("PCB: v%x.0\n", val); +#elif defined(CONFIG_P1010RDB_PB) + val = in_8(&cpld_data->cpld_ver); + printf("CPLD: v%x.%x, ", val >> 4, val & 0xf); + printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER)); + val = in_8(&cpld_data->rom_loc) & 0xf; + puts("Boot from: "); + switch (val) { + case 0xf: + config_board_mux(MUX_TYPE_CS0_NOR); + printf("NOR vBank%d\n", i2c_pca9557_read(I2C_READ_BANK)); + break; + case 0xe: + puts("SDHC\n"); + val = 0x60; /* set pca9557 pin input/output */ + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1); + break; + case 0x5: + config_board_mux(MUX_TYPE_IFC); + config_board_mux(MUX_TYPE_CS0_NAND); + puts("NAND\n"); + break; + case 0x6: + config_board_mux(MUX_TYPE_IFC); + puts("SPI\n"); + break; + default: + puts("unknown\n"); + break; + } +#endif return 0; } @@ -348,7 +511,6 @@ void board_reset(void) int misc_init_r(void) { - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) { @@ -356,7 +518,7 @@ int misc_init_r(void) MPC85xx_PMUXCR_CAN1_UART | MPC85xx_PMUXCR_CAN2_TDM | MPC85xx_PMUXCR_CAN2_UART); - out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART); + config_board_mux(MUX_TYPE_CAN); } else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) { clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART | MPC85xx_PMUXCR_CAN1_UART); @@ -364,11 +526,10 @@ int misc_init_r(void) MPC85xx_PMUXCR_CAN1_TDM); clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO); setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM); - out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM); - out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC); + config_board_mux(MUX_TYPE_TDM); } else { /* defaultly spi_cs_sel to flash */ - out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH); + config_board_mux(MUX_TYPE_SPIFLASH); } if (hwconfig("esdhc")) @@ -376,6 +537,9 @@ int misc_init_r(void) else if (hwconfig("ifc")) config_board_mux(MUX_TYPE_IFC); +#ifdef CONFIG_P1010RDB_PB + setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS); +#endif return 0; } diff --git a/boards.cfg b/boards.cfg index 29eefd8aab..56af10246f 100644 --- a/boards.cfg +++ b/boards.cfg @@ -826,20 +826,34 @@ Active powerpc mpc85xx - freescale mpc8569mds Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS MPC8572DS - Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_36BIT MPC8572DS:36BIT - Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_NAND MPC8572DS:NAND - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_NAND P1010RDB:P1010RDB,36BIT,NAND - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_NAND_SECBOOT P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_NOR P1010RDB:P1010RDB,36BIT - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_NOR_SECBOOT P1010RDB:P1010RDB,36BIT,SECURE_BOOT - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_SDCARD P1010RDB:P1010RDB,36BIT,SDCARD - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_SPIFLASH P1010RDB:P1010RDB,36BIT,SPIFLASH - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_SPIFLASH_SECBOOT P1010RDB:P1010RDB,36BIT,SPIFLASH,SECURE_BOOT - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_NAND P1010RDB:P1010RDB,NAND - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_NAND_SECBOOT P1010RDB:P1010RDB,NAND_SECBOOT,SECURE_BOOT - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_NOR P1010RDB:P1010RDB - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_NOR_SECBOOT P1010RDB:P1010RDB,SECURE_BOOT - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_SDCARD P1010RDB:P1010RDB,SDCARD - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_SPIFLASH P1010RDB:P1010RDB,SPIFLASH - -Active powerpc mpc85xx - freescale p1010rdb P1010RDB_SPIFLASH_SECBOOT P1010RDB:P1010RDB,SPIFLASH,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NAND P1010RDB:P1010RDB_PA,36BIT,NAND - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NAND_SECBOOT P1010RDB:P1010RDB_PA,36BIT,NAND_SECBOOT,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NOR P1010RDB:P1010RDB_PA,36BIT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NOR_SECBOOT P1010RDB:P1010RDB_PA,36BIT,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_SDCARD P1010RDB:P1010RDB_PA,36BIT,SDCARD - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_SPIFLASH P1010RDB:P1010RDB_PA,36BIT,SPIFLASH - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_SPIFLASH_SECBOOT P1010RDB:P1010RDB_PA,36BIT,SPIFLASH,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_NAND P1010RDB:P1010RDB_PA,NAND - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_NAND_SECBOOT P1010RDB:P1010RDB_PA,NAND_SECBOOT,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_NOR P1010RDB:P1010RDB_PA - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_NOR_SECBOOT P1010RDB:P1010RDB_PA,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_SDCARD P1010RDB:P1010RDB_PA,SDCARD - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_SPIFLASH P1010RDB:P1010RDB_PA,SPIFLASH - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_SPIFLASH_SECBOOT P1010RDB:P1010RDB_PA,SPIFLASH,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_NAND P1010RDB:P1010RDB_PB,36BIT,NAND - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_NAND_SECBOOT P1010RDB:P1010RDB_PB,36BIT,NAND_SECBOOT,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_NOR P1010RDB:P1010RDB_PB,36BIT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_NOR_SECBOOT P1010RDB:P1010RDB_PB,36BIT,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_SDCARD P1010RDB:P1010RDB_PB,36BIT,SDCARD - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_SPIFLASH P1010RDB:P1010RDB_PB,36BIT,SPIFLASH - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_SPIFLASH_SECBOOT P1010RDB:P1010RDB_PB,36BIT,SPIFLASH,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_NAND P1010RDB:P1010RDB_PB,NAND - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_NAND_SECBOOT P1010RDB:P1010RDB_PB,NAND_SECBOOT,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_NOR P1010RDB:P1010RDB_PB - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_NOR_SECBOOT P1010RDB:P1010RDB_PB,SECURE_BOOT - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_SDCARD P1010RDB:P1010RDB_PB,SDCARD - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_SPIFLASH P1010RDB:P1010RDB_PB,SPIFLASH - +Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_SPIFLASH_SECBOOT P1010RDB:P1010RDB_PB,SPIFLASH,SECURE_BOOT - Active powerpc mpc85xx - freescale p1022ds P1022DS - Timur Tabi Active powerpc mpc85xx - freescale p1022ds P1022DS_36BIT P1022DS:36BIT Timur Tabi Active powerpc mpc85xx - freescale p1022ds P1022DS_36BIT_NAND P1022DS:36BIT,NAND Timur Tabi diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 032c078773..c6b9acac3b 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -120,7 +120,11 @@ #endif /* controller 2, Slot 2, tgtid 2, Base address 9000 */ +#if defined(CONFIG_P1010RDB_PA) #define CONFIG_SYS_PCIE2_NAME "PCIe Slot" +#elif defined(CONFIG_P1010RDB_PB) +#define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot" +#endif #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 @@ -200,25 +204,24 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 - #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 #define CONFIG_SYS_DDR_RCW_1 0x00000000 #define CONFIG_SYS_DDR_RCW_2 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0x470C0000 /* Type = DDR3 */ -#define CONFIG_SYS_DDR_CONTROL_2 0x04401010 +#define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */ +#define CONFIG_SYS_DDR_CONTROL_2 0x24401000 #define CONFIG_SYS_DDR_TIMING_4 0x00000001 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 -#define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0_800 0x00330004 -#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4644 +#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 +#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 +#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 -#define CONFIG_SYS_DDR_MODE_1_800 0x40461520 -#define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 +#define CONFIG_SYS_DDR_MODE_1_800 0x00441420 +#define CONFIG_SYS_DDR_MODE_2_800 0x00000000 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100 -#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608 +#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 /* settings for DDR3 at 667MT/s */ #define CONFIG_SYS_DDR_TIMING_3_667 0x00010000 @@ -315,6 +318,8 @@ extern unsigned long get_sdram_size(void); | CSPR_MSEL_NAND \ | CSPR_V) #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#if defined(CONFIG_P1010RDB_PA) #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ @@ -322,13 +327,26 @@ extern unsigned long get_sdram_size(void); | CSOR_NAND_PGS_512 /* Page Size = 512b */ \ | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \ | CSOR_NAND_PB(32)) /* 32 Pages Per Block */ +#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) + +#elif defined(CONFIG_P1010RDB_PB) +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ + | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ + | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ + | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */ +#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) +#endif #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) +#if defined(CONFIG_P1010RDB_PA) /* NAND Flash Timing Params */ #define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \ FTIM0_NAND_TWP(0x0C) | \ @@ -343,6 +361,23 @@ extern unsigned long get_sdram_size(void); FTIM2_NAND_TWHRE(0x0f) #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) +#elif defined(CONFIG_P1010RDB_PB) +/* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */ +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 +#endif + #define CONFIG_SYS_NAND_DDR_LAW 11 /* Set up IFC registers for boot location NOR/NAND */ @@ -475,10 +510,20 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 #define I2C_PCA9557_ADDR1 0x18 +#define I2C_PCA9557_ADDR2 0x19 #define I2C_PCA9557_BUS_NUM 0 /* I2C EEPROM */ -#undef CONFIG_ID_EEPROM +#if defined(CONFIG_P1010RDB_PB) +#define CONFIG_ID_EEPROM +#ifdef CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#endif +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */ +#endif /* enable read and write access to EEPROM */ #define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_MULTI_EEPROMS @@ -602,9 +647,14 @@ extern unsigned long get_sdram_size(void); #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_NAND) #define CONFIG_ENV_IS_IN_NAND +#if defined(CONFIG_P1010RDB_PA) #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */ +#elif defined(CONFIG_P1010RDB_PB) +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ +#endif #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) @@ -697,7 +747,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_HAS_ETH2 #endif -#define CONFIG_HOSTNAME P1010RDB #define CONFIG_ROOTPATH "/opt/nfsroot" #define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ @@ -736,7 +785,31 @@ extern unsigned long get_sdram_size(void); "ext2load usb 0:4 $loadaddr $bootfile;" \ "ext2load usb 0:4 $fdtaddr $fdtfile;" \ "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ + CONFIG_BOOTMODE + +#if defined(CONFIG_P1010RDB_PA) +#define CONFIG_BOOTMODE \ + "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ + "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \ + "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ + "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \ + "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \ + "mw.b ffb00011 0; mw.b ffb00017 1; reset\0" + +#elif defined(CONFIG_P1010RDB_PB) +#define CONFIG_BOOTMODE \ + "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ + "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \ + "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ + "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \ + "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \ + "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \ + "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \ + "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \ + "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \ + "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" +#endif #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ -- 2.25.1