From e4a06fa3308926ca6997d49b888baf8cc903e6f3 Mon Sep 17 00:00:00 2001 From: =?utf8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Tue, 23 Jan 2018 17:15:04 +0100 Subject: [PATCH] mips: bmips: enable the SPI flash on the Sagem F@ST1704 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit It's a Winbond (w25x32) 4 MB SPI flash. Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Daniel Schwierzeck Reviewed-by: Jagan Teki Reviewed-by: Simon Glass --- arch/mips/dts/sagem,f@st1704.dts | 12 ++++++++++++ configs/sagem_f@st1704_ram_defconfig | 8 ++++++++ 2 files changed, 20 insertions(+) diff --git a/arch/mips/dts/sagem,f@st1704.dts b/arch/mips/dts/sagem,f@st1704.dts index be15fe5551..dd0e5b8b7c 100644 --- a/arch/mips/dts/sagem,f@st1704.dts +++ b/arch/mips/dts/sagem,f@st1704.dts @@ -44,6 +44,18 @@ status = "okay"; }; +&spi { + status = "okay"; + + spi-flash@0 { + compatible = "spi-flash"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + }; +}; + &uart0 { u-boot,dm-pre-reloc; status = "okay"; diff --git a/configs/sagem_f@st1704_ram_defconfig b/configs/sagem_f@st1704_ram_defconfig index cfc56cba37..07a125cec6 100644 --- a/configs/sagem_f@st1704_ram_defconfig +++ b/configs/sagem_f@st1704_ram_defconfig @@ -26,6 +26,8 @@ CONFIG_CMD_MEMINFO=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set @@ -34,8 +36,14 @@ CONFIG_DM_GPIO=y CONFIG_BCM6345_GPIO=y CONFIG_LED=y CONFIG_LED_GPIO=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_MTD=y CONFIG_DM_RESET=y CONFIG_RESET_BCM6345=y # CONFIG_SPL_SERIAL_PRESENT is not set CONFIG_DM_SERIAL=y CONFIG_BCM6345_SERIAL=y +CONFIG_DM_SPI=y +CONFIG_BCM63XX_SPI=y -- 2.25.1