From e389033f72b55f1f30952e419a8505efcdd4c91d Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 28 Nov 2016 17:49:50 +0800 Subject: [PATCH] imx: mx6sxsabreauto: enable more dm drivers Enable MMC/I2C/GPIO/PMIC/REGULATOR/PCA953X DM drivers for mx6sxsabreauto board. Drop non-DM code. Note: The i.MX DM drivers has such dependency. MXC GPIO -> MXC I2C -> PFUZE/REGULATOR MXC GPIO -> PCA953X MXC GPIO -> FSL_USDHC So the drivers needs to be enabled all to avoid compiling error. The uboot dm tree log: => dm tree Class Probed Name ---------------------------------------- root [ + ] root_driver thermal [ ] |-- imx_thermal simple_bus [ + ] |-- soc simple_bus [ + ] | |-- aips-bus@02000000 simple_bus [ ] | | |-- spba-bus@02000000 gpio [ + ] | | |-- gpio@0209c000 gpio [ + ] | | |-- gpio@020a0000 gpio [ + ] | | |-- gpio@020a4000 gpio [ + ] | | |-- gpio@020a8000 gpio [ + ] | | |-- gpio@020ac000 gpio [ + ] | | |-- gpio@020b0000 gpio [ + ] | | |-- gpio@020b4000 simple_bus [ ] | | |-- anatop@020c8000 simple_bus [ ] | | |-- snvs@020cc000 pinctrl [ + ] | | `-- iomuxc@020e0000 pinconfig [ + ] | | `-- imx6x-sabreauto pinconfig [ + ] | | |-- i2c2grp-1 pinconfig [ + ] | | |-- i2c3grp-2 pinconfig [ ] | | |-- uart1grp pinconfig [ + ] | | |-- usdhc3grp pinconfig [ ] | | |-- usdhc3grp-100mhz pinconfig [ ] | | |-- usdhc3grp-200mhz pinconfig [ + ] | | |-- usdhc4grp pinconfig [ + ] | | `-- vccsd3grp simple_bus [ + ] | |-- aips-bus@02100000 mmc [ + ] | | |-- usdhc@02198000 mmc [ + ] | | |-- usdhc@0219c000 i2c [ + ] | | |-- i2c@021a4000 i2c_generic [ + ] | | | |-- generic_8 i2c_generic [ + ] | | | `-- generic_4e i2c [ + ] | | `-- i2c@021a8000 gpio [ + ] | | |-- gpio@30 gpio [ + ] | | `-- gpio@32 simple_bus [ ] | `-- aips-bus@02200000 simple_bus [ ] | `-- spba-bus@02200000 simple_bus [ + ] `-- regulators regulator [ + ] `-- regulator@0 Signed-off-by: Peng Fan Cc: Stefano Babic --- .../freescale/mx6sxsabreauto/mx6sxsabreauto.c | 258 ++++-------------- configs/mx6sxsabreauto_defconfig | 13 + include/configs/mx6sxsabreauto.h | 7 - 3 files changed, 69 insertions(+), 209 deletions(-) diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c index 44e6a7d141..e7ab81091d 100644 --- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c +++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c @@ -16,12 +16,9 @@ #include #include #include -#include #include #include #include -#include -#include #include #include #include @@ -37,15 +34,6 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE) - #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ PAD_CTL_SPEED_HIGH | \ PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) @@ -56,54 +44,11 @@ DECLARE_GLOBAL_DATA_PTR; #define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST) -#define I2C_PMIC 1 - #define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) #define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \ PAD_CTL_SRE_FAST) #define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1) -/*Define for building port exp gpio, pin starts from 0*/ -#define PORTEXP_IO_NR(chip, pin) \ - ((chip << 5) + pin) - -/*Get the chip addr from a ioexp gpio*/ -#define PORTEXP_IO_TO_CHIP(gpio_nr) \ - (gpio_nr >> 5) - -/*Get the pin number from a ioexp gpio*/ -#define PORTEXP_IO_TO_PIN(gpio_nr) \ - (gpio_nr & 0x1f) - -#define CPU_PER_RST_B PORTEXP_IO_NR(0x30, 4) -#define STEER_ENET PORTEXP_IO_NR(0x32, 2) - -static int port_exp_direction_output(unsigned gpio, int value) -{ - int ret; - - i2c_set_bus_num(2); - ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio)); - if (ret) - return ret; - - ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio), - (1 << PORTEXP_IO_TO_PIN(gpio)), - (PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio))); - - if (ret) - return ret; - - ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio), - (1 << PORTEXP_IO_TO_PIN(gpio)), - (value << PORTEXP_IO_TO_PIN(gpio))); - - if (ret) - return ret; - - return 0; -} - int dram_init(void) { gd->ram_size = imx_ddr_size(); @@ -116,41 +61,6 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), }; -static iomux_v3_cfg_t const usdhc3_pads[] = { - MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - - /* CD pin */ - MX6_PAD_USB_H_DATA__GPIO7_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL), - - /* RST_B, used for power reset cycle */ - MX6_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { - MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA4__USDHC4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - - /* CD pin */ - MX6_PAD_USB_H_STROBE__GPIO7_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - static iomux_v3_cfg_t const fec2_pads[] = { MX6_PAD_ENET1_MDC__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_ENET1_MDIO__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -217,42 +127,43 @@ int board_phy_config(struct phy_device *phydev) return 0; } -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* I2C2 for PMIC */ -struct i2c_pads_info i2c_pad_info2 = { - .scl = { - .i2c_mode = MX6_PAD_GPIO1_IO02__I2C2_SCL | PC, - .gpio_mode = MX6_PAD_GPIO1_IO02__GPIO1_IO_2 | PC, - .gp = IMX_GPIO_NR(1, 2), - }, - .sda = { - .i2c_mode = MX6_PAD_GPIO1_IO03__I2C2_SDA | PC, - .gpio_mode = MX6_PAD_GPIO1_IO03__GPIO1_IO_3 | PC, - .gp = IMX_GPIO_NR(1, 3), - }, -}; - -/* I2C3 for IO Expander */ -struct i2c_pads_info i2c_pad_info3 = { - .scl = { - .i2c_mode = MX6_PAD_KEY_COL4__I2C3_SCL | PC, - .gpio_mode = MX6_PAD_KEY_COL4__GPIO2_IO_14 | PC, - .gp = IMX_GPIO_NR(2, 14), - }, - .sda = { - .i2c_mode = MX6_PAD_KEY_ROW4__I2C3_SDA | PC, - .gpio_mode = MX6_PAD_KEY_ROW4__GPIO2_IO_19 | PC, - .gp = IMX_GPIO_NR(2, 19), - }, -}; - int power_init_board(void) { - struct pmic *p; + struct udevice *dev; + int ret; + u32 dev_id, rev_id, i; + u32 switch_num = 6; + u32 offset = PFUZE100_SW1CMODE; + + ret = pmic_get("pfuze100", &dev); + if (ret == -ENODEV) + return 0; + + if (ret != 0) + return ret; + + dev_id = pmic_reg_read(dev, PFUZE100_DEVICEID); + rev_id = pmic_reg_read(dev, PFUZE100_REVID); + printf("PMIC: PFUZE100! DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id); - p = pfuze_common_init(I2C_PMIC); - if (!p) - return -ENODEV; + + /* Init mode to APS_PFM */ + pmic_reg_write(dev, PFUZE100_SW1ABMODE, APS_PFM); + + for (i = 0; i < switch_num - 1; i++) + pmic_reg_write(dev, offset + i * SWITCH_SIZE, APS_PFM); + + /* set SW1AB staby volatage 0.975V */ + pmic_clrsetbits(dev, PFUZE100_SW1ABSTBY, 0x3f, 0x1b); + + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_clrsetbits(dev, PFUZE100_SW1ABCONF, 0xc0, 0x40); + + /* set SW1C staby volatage 1.10V */ + pmic_clrsetbits(dev, PFUZE100_SW1CSTBY, 0x3f, 0x20); + + /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ + pmic_clrsetbits(dev, PFUZE100_SW1CCONF, 0xc0, 0x40); return 0; } @@ -307,78 +218,6 @@ int board_early_init_f(void) return 0; } -static struct fsl_esdhc_cfg usdhc_cfg[3] = { - {USDHC3_BASE_ADDR}, - {USDHC4_BASE_ADDR}, -}; - -#define USDHC3_CD_GPIO IMX_GPIO_NR(7, 10) -#define USDHC3_RST_GPIO IMX_GPIO_NR(2, 11) -#define USDHC4_CD_GPIO IMX_GPIO_NR(7, 11) - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC3_BASE_ADDR: - ret = !gpio_get_value(USDHC3_CD_GPIO); - break; - case USDHC4_BASE_ADDR: - ret = !gpio_get_value(USDHC4_CD_GPIO); - break; - } - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - int i, ret; - - /* - * According to the board_mmc_init() the following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 USDHC3 - * mmc1 USDHC4 - */ - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - gpio_direction_input(USDHC3_CD_GPIO); - - /* This starts a power cycle for UHS-I. Need to set steer to B0 to A*/ - gpio_direction_output(USDHC3_RST_GPIO, 0); - udelay(1000); /* need 1ms at least */ - gpio_direction_output(USDHC3_RST_GPIO, 1); - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); - gpio_direction_input(USDHC4_CD_GPIO); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - break; - default: - printf("Warning: you configured more USDHC controllers" - "(%d) than supported by the board\n", i + 1); - return -EINVAL; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) { - printf("Warning: failed to initialize mmc dev %d\n", i); - return ret; - } - } - - return 0; -} - #ifdef CONFIG_FSL_QSPI #define QSPI_PAD_CTRL1 \ @@ -450,21 +289,36 @@ static void setup_gpmi_nand(void) int board_init(void) { + struct gpio_desc desc; + int ret; + /* Address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; -#ifdef CONFIG_SYS_I2C_MXC - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); -#endif + ret = dm_gpio_lookup_name("gpio@30_4", &desc); + if (ret) + return ret; + ret = dm_gpio_request(&desc, "cpu_per_rst_b"); + if (ret) + return ret; /* Reset CPU_PER_RST_B signal for enet phy and PCIE */ - port_exp_direction_output(CPU_PER_RST_B, 0); + dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); udelay(500); - port_exp_direction_output(CPU_PER_RST_B, 1); + dm_gpio_set_value(&desc, 1); + + ret = dm_gpio_lookup_name("gpio@32_2", &desc); + if (ret) + return ret; + ret = dm_gpio_request(&desc, "steer_enet"); + if (ret) + return ret; + + dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); + udelay(500); /* Set steering signal to L for selecting B0 */ - port_exp_direction_output(STEER_ENET, 0); + dm_gpio_set_value(&desc, 0); #ifdef CONFIG_USB_EHCI_MX6 setup_usb(); diff --git a/configs/mx6sxsabreauto_defconfig b/configs/mx6sxsabreauto_defconfig index 3e3feab3f2..b5467406a9 100644 --- a/configs/mx6sxsabreauto_defconfig +++ b/configs/mx6sxsabreauto_defconfig @@ -19,17 +19,30 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y +CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y +# CONFIG_BLK is not set +CONFIG_DM_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_MMC_OPS is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 90a935bbd0..0742b4bf2e 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -114,19 +114,12 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR /* I2C Configs */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE100 -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 - /* NAND flash command */ #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS -- 2.25.1