From e36edcec0a2491d1e31ddb9d82d77b9763e9aef0 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Tue, 12 Dec 2017 17:14:27 +0530 Subject: [PATCH] board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM MCAN can be accessed via DCAN1 or DCAN2. Determining which DCAN instance to use if any at all is done through CTRL_CORE_CONTROL_SPARE_RW.SEL_ALT_MCAN. Since general pinmuxing is handled in U-boot. Handle this additional pinmuxing requirement in U-boot to ensure that MCAN is used by default via the DCAN1 pins. Reviewed-by: Lokesh Vutla Signed-off-by: Vignesh R [fcooper@ti.com: Update commit message and use DCAN1 not DCAN2 for MCAN] Signed-off-by: Franklin S Cooper Jr Signed-off-by: Lokesh Vutla Signed-off-by: Faiz Abbas --- arch/arm/include/asm/arch-omap5/mux_dra7xx.h | 3 +++ board/ti/dra7xx/evm.c | 5 +++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h index 55f49c7848..dc2eb608e2 100644 --- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -351,4 +351,7 @@ #define NMIN_DSP 0x460 #define RSTOUTN 0x464 +#define MCAN_SEL_ALT_MASK 0x6000 +#define MCAN_SEL 0x2000 + #endif /* _MUX_DRA7XX_H_ */ diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 6bcfa48231..ddcbe31f0e 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -823,6 +823,11 @@ void recalibrate_iodelay(void) do_set_mux32((*ctrl)->control_padconf_core_base, delta_pads, delta_npads); + if (is_dra76x()) + /* Set mux for MCAN instead of DCAN1 */ + clrsetbits_le32((*ctrl)->control_core_control_spare_rw, + MCAN_SEL_ALT_MASK, MCAN_SEL); + /* Setup IOdelay configuration */ ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays); err: -- 2.25.1