From e2ffd59b4d93c9149de1caaa087371b0cfc512c9 Mon Sep 17 00:00:00 2001 From: wdenk Date: Fri, 31 Dec 2004 09:32:47 +0000 Subject: [PATCH] * Code cleanup, mostly for GCC-3.3.x * Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board. --- CHANGELOG | 14 + MAKEALL | 6 +- board/cmc_pu2/flash.c | 5 +- board/cpc45/Makefile | 2 +- board/cpc45/cpc45.c | 40 +++ board/cpc45/pd67290.c | 68 ++++ board/esd/cpci750/cpci750.c | 24 +- board/esd/cpci750/local.h | 2 + board/esd/pci405/pci405.c | 2 +- board/evb64260/local.h | 2 + board/jse/host_bridge.c | 2 - board/pn62/pn62.c | 2 + board/xilinx/xilinx_iic/iic_adapter.c | 5 +- common/cmd_bdinfo.c | 6 +- common/cmd_flash.c | 4 + common/cmd_ide.c | 17 +- common/cmd_pcmcia.c | 13 +- common/cmd_universe.c | 50 ++- common/environment.c | 3 + cpu/74xx_7xx/config.mk | 2 +- cpu/mpc8220/fec.c | 8 +- cpu/mpc824x/config.mk | 2 +- cpu/mpc8xx/config.mk | 2 +- cpu/ppc4xx/440gx_enet.c | 24 +- cpu/ppc4xx/config.mk | 2 +- drivers/i82365.c | 472 ++++++++++++++++++++++++-- include/asm-ppc/u-boot.h | 6 +- include/configs/Alaska8220.h | 1 + include/configs/CATcenter.h | 1 + include/configs/CPC45.h | 49 ++- include/configs/DB64360.h | 1 + include/configs/DB64460.h | 2 + include/configs/G2000.h | 1 + include/configs/HUB405.h | 1 + include/configs/ISPAN.h | 2 + include/configs/LANTEC.h | 2 + include/configs/MPC8260ADS.h | 2 + include/configs/MPC8266ADS.h | 2 + include/configs/MPC8540ADS.h | 2 + include/configs/MPC8541CDS.h | 2 + include/configs/MPC8555CDS.h | 2 + include/configs/MPC8560ADS.h | 2 + include/configs/OCOTEA.h | 3 + include/configs/PN62.h | 2 + include/configs/PPChameleonEVB.h | 1 + include/configs/RBC823.h | 2 + include/configs/SBC8540.h | 8 +- include/configs/SBC8560.h | 8 +- include/configs/SXNI855T.h | 2 + include/configs/XPEDITE1K.h | 6 +- include/configs/ep8260.h | 2 + include/configs/hymod.h | 2 + include/configs/ml300.h | 2 +- include/configs/quantum.h | 3 +- include/configs/sbc8560.h | 8 +- include/configs/stxgp3.h | 4 +- include/pcmcia/cirrus.h | 174 ++++++++++ lib_ppc/board.c | 6 +- tools/env/fw_env.c | 3 + 59 files changed, 964 insertions(+), 129 deletions(-) create mode 100644 board/cpc45/pd67290.c create mode 100644 include/pcmcia/cirrus.h diff --git a/CHANGELOG b/CHANGELOG index 425c635398..f462384cb8 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,20 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Code cleanup, mostly for GCC-3.3.x + +* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to + pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for + additional ethernet addresses. + +* Cleanup drivers/i82365.c - avoid duplication of code + +* Fix bogus "cannot span across banks" flash error message + +* Code cleanup + +* Add support for CompactFlash for the CPC45 Board. + * Fix problems with CMC_PU2 flash driver. * Cleanup: diff --git a/MAKEALL b/MAKEALL index 5b9e87f79a..77d9487632 100644 --- a/MAKEALL +++ b/MAKEALL @@ -99,9 +99,9 @@ LIST_8260=" \ atc cogent_mpc8260 CPU86 ep8260 \ gw8260 hymod IPHASE4539 ISPAN \ MPC8260ADS MPC8266ADS MPC8272ADS PM826 \ - PM828 ppmc8260 PQ2FADS RPXsuper \ - rsdproto sacsng sbc8260 SCM \ - TQM8260_AC TQM8260_AD TQM8260_AE ZPC1900 \ + PM828 ppmc8260 RPXsuper rsdproto \ + sacsng sbc8260 SCM TQM8260_AC \ + TQM8260_AD TQM8260_AE ZPC1900 \ " ######################################################################### diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c index 846a2e6bf1..9983c7b78c 100644 --- a/board/cmc_pu2/flash.c +++ b/board/cmc_pu2/flash.c @@ -264,7 +264,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { vu_short *addr = (vu_short *)(info->start[0]); int flag, prot, sect, ssect, l_sect; - ulong start, now, last; + ulong now, last; debug ("flash_erase: first: %d last: %d\n", s_first, s_last); @@ -336,7 +336,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) goto DONE; reset_timer_masked (); - last = start; + last = 0; addr = (vu_short *)(info->start[l_sect]); while ((addr[0] & 0x0080) != 0x0080) { if ((now = get_timer_masked ()) > CFG_FLASH_ERASE_TOUT) { @@ -432,7 +432,6 @@ printf ("write_buff 1: write_word_amd() rc=%d\n", rc); */ static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data) { - ulong start; int flag; vu_short *base; /* first address in flash bank */ diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile index db5a83b70d..ccb811bd4d 100644 --- a/board/cpc45/Makefile +++ b/board/cpc45/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS = $(BOARD).o flash.o plx9030.o +OBJS = $(BOARD).o flash.o plx9030.o pd67290.o $(LIB): .depend $(OBJS) $(AR) crv $@ $(OBJS) diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c index 92ccd42e7f..51b0085911 100644 --- a/board/cpc45/cpc45.c +++ b/board/cpc45/cpc45.c @@ -24,11 +24,13 @@ #include #include #include +#include #include #include int sysControlDisplay(int digit, uchar ascii_code); extern void Plx9030Init(void); +extern void SPD67290Init(void); /* We have to clear the initial data area here. Couldn't have done it * earlier because DRAM had not been initialized. @@ -180,6 +182,10 @@ static struct pci_config_table pci_cpc45_config_table[] = { pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR, PCI_PLX9030_MEMADDR, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0E, PCI_ANY_ID, + pci_cfgfunc_config_device, { PCMCIA_IO_BASE, + PCMCIA_IO_BASE, + PCI_COMMAND_MEMORY | PCI_COMMAND_IO }}, #endif /*CONFIG_PCI_PNP*/ { } }; @@ -233,3 +239,37 @@ int sysControlDisplay (int digit, /* number of digit 0..7 */ return (0); } + +#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) + +#ifdef CFG_PCMCIA_MEM_ADDR +volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR; +#endif + +int pcmcia_init(void) +{ + u_int rc; + + debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n"); + + rc = i82365_init(); + + return rc; +} + +#endif /* CFG_CMD_PCMCIA */ + +# ifdef CONFIG_IDE_LED +void ide_led (uchar led, uchar status) +{ + u_char val; + /* We have one PCMCIA slot and use LED H4 for the IDE Interface */ + val = readb(BCSR_BASE + 0x04); + if (status) { /* led on */ + val |= B_CTRL_LED0; + } else { + val &= ~B_CTRL_LED0; + } + writeb(val, BCSR_BASE + 0x04); +} +# endif diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c new file mode 100644 index 0000000000..c84fbae918 --- /dev/null +++ b/board/cpc45/pd67290.c @@ -0,0 +1,68 @@ +/* pd67290.c - system configuration module for SPD67290 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * (C) 2004 DENX Software Engineering, Heiko Schocher + */ + +#include +#include +#include +#include +#include + +/* imports */ +#include + +static struct pci_device_id supported[] = { + {PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729}, + {} +}; + +/*************************************************************************** +* +* SPD67290Init - +* +* RETURNS: -1 on error, 0 if OK +*/ + +int SPD67290Init (void) +{ + pci_dev_t devno; + int idx = 0; /* general index */ + ulong membaseCsr; /* base address of device memory space */ + + /* find PD67290 device */ + if ((devno = pci_find_devices (supported, idx++)) < 0) { + printf ("No PD67290 device found !!\n"); + return -1; + } + /* - 0xfe000000 see MPC 8245 Users Manual Adress Map B */ + membaseCsr = PCMCIA_IO_BASE - 0xfe000000; + + /* set base address */ + pci_write_config_dword (devno, PCI_BASE_ADDRESS_0, membaseCsr); + + /* enable mapped memory and IO addresses */ + pci_write_config_dword (devno, + PCI_COMMAND, + PCI_COMMAND_MEMORY | + PCI_COMMAND_IO | PCI_COMMAND_WAIT); + return 0; +} diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 56c12d7317..68f121d6bf 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -494,18 +494,18 @@ static void move64 (unsigned long long *src, unsigned long long *dest) #if defined (CFG_DRAM_TEST_DATA) unsigned long long pattern[] = { - 0xaaaaaaaaaaaaaaaa, - 0xcccccccccccccccc, - 0xf0f0f0f0f0f0f0f0, - 0xff00ff00ff00ff00, - 0xffff0000ffff0000, - 0xffffffff00000000, - 0x00000000ffffffff, - 0x0000ffff0000ffff, - 0x00ff00ff00ff00ff, - 0x0f0f0f0f0f0f0f0f, - 0x3333333333333333, - 0x5555555555555555 + 0xaaaaaaaaaaaaaaaaLL, + 0xccccccccccccccccLL, + 0xf0f0f0f0f0f0f0f0LL, + 0xff00ff00ff00ff00LL, + 0xffff0000ffff0000LL, + 0xffffffff00000000LL, + 0x00000000ffffffffLL, + 0x0000ffff0000ffffLL, + 0x00ff00ff00ff00ffLL, + 0x0f0f0f0f0f0f0f0fLL, + 0x3333333333333333LL, + 0x5555555555555555LL, }; /*********************************************************************/ diff --git a/board/esd/cpci750/local.h b/board/esd/cpci750/local.h index 47ab31e908..bca0e1ff50 100644 --- a/board/esd/cpci750/local.h +++ b/board/esd/cpci750/local.h @@ -76,7 +76,9 @@ #define CONFIG_ETHADDR 64:36:00:00:00:01 /* next two ethernet hwaddrs */ +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 86:06:2d:7e:c6:54 +#define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 86:06:2d:7e:c6:55 #define CONFIG_ENV_OVERWRITE diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 80d6dbb234..cb458ebc47 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -306,7 +306,7 @@ int misc_init_r (void) /* mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00100000); */ mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00000000); #endif - /* printf("CCR0=%08x\n", mfspr(ccr0));*/ /* test-only */ +/* printf("CCR0=%08x\n", mfspr(ccr0)); */ /* test-only */ #endif free(dst); diff --git a/board/evb64260/local.h b/board/evb64260/local.h index 6d1fb4cdab..3d9b443e7b 100644 --- a/board/evb64260/local.h +++ b/board/evb64260/local.h @@ -53,7 +53,9 @@ #define CONFIG_ETHADDR 00:11:22:33:44:55 /* next two ethernet hwaddrs */ +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:11:22:33:44:66 +#define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:11:22:33:44:77 #define CONFIG_ENV_OVERWRITE diff --git a/board/jse/host_bridge.c b/board/jse/host_bridge.c index 11c41bdada..363be97a59 100644 --- a/board/jse/host_bridge.c +++ b/board/jse/host_bridge.c @@ -39,8 +39,6 @@ void host_bridge_init (void) /* The bridge chip is at a fixed location. */ pci_dev_t dev = PCI_BDF (0, 10, 0); - int rc; - /* Set PCI Class code -- The primary side sees this class code at 0x08 in the primary config space. This must be something other then a diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c index c0111dcd92..025224027e 100644 --- a/board/pn62/pn62.c +++ b/board/pn62/pn62.c @@ -145,11 +145,13 @@ int misc_init_r (void) } show_startup_phase (10); +#ifdef CONFIG_HAS_ETH1 if (getenv ("eth1addr") == NULL && get_mac_address (1, mac, str, sizeof (str)) > 0) { setenv ("eth1addr", str); memcpy (gd->bd->bi_enet1addr, mac, 6); } +#endif /* CONFIG_HAS_ETH1 */ show_startup_phase (11); /* Tell everybody that U-Boot is up and runnig */ diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c index 8ddba6ade2..0b7de7b997 100644 --- a/board/xilinx/xilinx_iic/iic_adapter.c +++ b/board/xilinx/xilinx_iic/iic_adapter.c @@ -328,8 +328,9 @@ convert_env(void) s = getenv("E"); if (s != NULL) { sprintf(temp, "%c%c.%c%c.%c%c.%c%c.%c%c.%c%c", - *s++, *s++, *s++, *s++, *s++, *s++, - *s++, *s++, *s++, *s++, *s++, *s); + s[0], s[1], s[ 2], s[ 3], + s[4], s[5], s[ 6], s[ 7], + s[8], s[9], s[10], s[11] ); setenv("ethaddr", temp); setenv("E", NULL); } diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 4c5540f253..ca834732b8 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -92,21 +92,21 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); } -#if defined(CONFIG_ETH1ADDR) +#if defined(CONFIG_HAS_ETH1) puts ("\neth1addr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enet1addr[i]); } #endif -#if defined(CONFIG_ETH2ADDR) +#if defined(CONFIG_HAS_ETH2) puts ("\neth2addr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enet2addr[i]); } #endif -#if defined(CONFIG_ETH3ADDR) +#if defined(CONFIG_HAS_ETH3) puts ("\neth3addr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enet3addr[i]); diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 5ecf88873a..b2728ab1d3 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -164,6 +164,10 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last, sect = s_last[bank]; addr_first = (sect == s_end) ? b_end + 1: info->start[sect + 1]; (*s_count) += s_last[bank] - s_first[bank] + 1; + } else if (addr_first >= info->start[0] && addr_first < b_end) { + puts ("Error: start address not on sector boundary\n"); + rcode = 1; + break; } else if (s_last[bank] >= 0) { puts ("Error: cannot span across banks when they are" " mapped in reverse order\n"); diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 77a0494016..851ba52c81 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2002 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -144,7 +144,7 @@ block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE]; /* ------------------------------------------------------------------------- */ #ifdef CONFIG_IDE_LED -#if !defined(CONFIG_KUP4K) && !defined(CONFIG_KUP4X) &&!defined(CONFIG_BMS2003) +#if !defined(CONFIG_KUP4K) && !defined(CONFIG_KUP4X) &&!defined(CONFIG_BMS2003) &&!defined(CONFIG_CPC45) static void ide_led (uchar led, uchar status); #else extern void ide_led (uchar led, uchar status); @@ -1548,11 +1548,12 @@ static void ide_reset (void) /* ------------------------------------------------------------------------- */ -#if defined(CONFIG_IDE_LED) && \ - !defined(CONFIG_AMIGAONEG3SE) && \ - !defined(CONFIG_KUP4K) && \ - !defined(CONFIG_KUP4X) && \ - !defined(CONFIG_HMI10) +#if defined(CONFIG_IDE_LED) && \ + !defined(CONFIG_AMIGAONEG3SE)&& \ + !defined(CONFIG_CPC45) && \ + !defined(CONFIG_HMI10) && \ + !defined(CONFIG_KUP4K) && \ + !defined(CONFIG_KUP4X) static uchar led_buffer = 0; /* Buffer for current LED status */ @@ -1578,7 +1579,6 @@ static void ide_led (uchar led, uchar status) * ATAPI Support */ - #undef ATAPI_DEBUG #ifdef ATAPI_DEBUG @@ -1661,7 +1661,6 @@ output_data_shorts(int dev, ushort *sect_buf, int shorts) outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, shorts); } - static void input_data_shorts(int dev, ushort *sect_buf, int shorts) { diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c index 1387e8989f..31f2ba2f69 100644 --- a/common/cmd_pcmcia.c +++ b/common/cmd_pcmcia.c @@ -67,6 +67,8 @@ #include #endif +#include + #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || \ ((CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)) @@ -540,9 +542,18 @@ static int check_ide_device (int slot) ide_devices_found |= (1 << slot); +#if CONFIG_CPC45 +#else /* set I/O area in config reg -> only valid for ARGOSY D5!!! */ *((uchar *)(addr + config_base)) = 1; - +#endif +#if 0 + printf("\n## Config_base = %04x ###\n", config_base); + printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base); + printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2)); + printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4)); + printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6)); +#endif return (0); } #endif /* CONFIG_IDE_8xx_PCCARD */ diff --git a/common/cmd_universe.c b/common/cmd_universe.c index 6388546041..a8febff02a 100644 --- a/common/cmd_universe.c +++ b/common/cmd_universe.c @@ -28,20 +28,8 @@ #include - #if (CONFIG_COMMANDS & CFG_CMD_UNIVERSE) -#undef DBG - -#ifdef DBG -# define UNI_DBG(fmt) printf fmt -#else -# define UNI_DBG(fmt) -#endif - -#define UNI_PRINT(fmt) printf fmt - - #define PCI_VENDOR PCI_VENDOR_ID_TUNDRA #define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_CA91C042 @@ -87,18 +75,18 @@ int universe_init(void) val &= ~0xf; dev->uregs = (UNIVERSE *)val; - UNI_DBG(("UNIVERSE-Base : %p\n", dev->uregs)); + debug ("UNIVERSE-Base : %p\n", dev->uregs); /* check mapping */ - UNI_DBG((" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id))); + debug (" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id)); if (((PCI_DEVICE <<16) | PCI_VENDOR) != readl(&dev->uregs->pci_id)) { - UNI_PRINT(("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n", - readl(&dev->uregs->pci_id))); + printf ("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n", + readl(&dev->uregs->pci_id)); result = -1; goto break_30; } - UNI_DBG(("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs))); + debug ("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs)); dev->pci_bs = readl(&dev->uregs->pci_bs); @@ -154,12 +142,12 @@ int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int si } if (i == 4) { - UNI_PRINT(("universe: No Image available\n")); + printf ("universe: No Image available\n"); result = -1; goto exit_10; } - UNI_DBG(("universe: Using image %d\n", i)); + debug ("universe: Using image %d\n", i); writel(pciAddr , &dev->uregs->lsi[i].bs); writel((pciAddr + size), &dev->uregs->lsi[i].bd); @@ -219,11 +207,11 @@ int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int si writel(ctl, &dev->uregs->lsi[i].ctl); - UNI_DBG(("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl)); - UNI_DBG(("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl))); - UNI_DBG(("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs))); - UNI_DBG(("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd))); - UNI_DBG(("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to))); + debug ("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl); + debug ("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl)); + debug ("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs)); + debug ("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd)); + debug ("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to)); return 0; @@ -251,12 +239,12 @@ int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int si } if (i == 4) { - UNI_PRINT(("universe: No Image available\n")); + printf ("universe: No Image available\n"); result = -1; goto exit_10; } - UNI_DBG(("universe: Using image %d\n", i)); + debug ("universe: Using image %d\n", i); writel(vmeAddr , &dev->uregs->vsi[i].bs); writel((vmeAddr + size), &dev->uregs->vsi[i].bd); @@ -304,11 +292,11 @@ int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int si writel(ctl, &dev->uregs->vsi[i].ctl); - UNI_DBG(("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl)); - UNI_DBG(("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl))); - UNI_DBG(("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs))); - UNI_DBG(("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd))); - UNI_DBG(("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to))); + debug ("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl); + debug ("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl)); + debug ("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs)); + debug ("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd)); + debug ("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to)); return 0; diff --git a/common/environment.c b/common/environment.c index 3d8493a502..61a8d245f9 100644 --- a/common/environment.c +++ b/common/environment.c @@ -130,6 +130,9 @@ env_t environment __PPCENV__ = { #ifdef CONFIG_ETH2ADDR "eth2addr=" MK_STR(CONFIG_ETH2ADDR) "\0" #endif +#ifdef CONFIG_ETH3ADDR + "eth3addr=" MK_STR(CONFIG_ETH3ADDR) "\0" +#endif #ifdef CONFIG_ETHPRIME "ethprime=" CONFIG_ETHPRIME "\0" #endif diff --git a/cpu/74xx_7xx/config.mk b/cpu/74xx_7xx/config.mk index d65b506730..417d99f33b 100644 --- a/cpu/74xx_7xx/config.mk +++ b/cpu/74xx_7xx/config.mk @@ -21,6 +21,6 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -ffixed-r2 -ffixed-r29 -mstring diff --git a/cpu/mpc8220/fec.c b/cpu/mpc8220/fec.c index 1bc51cde93..96228e50d0 100644 --- a/cpu/mpc8220/fec.c +++ b/cpu/mpc8220/fec.c @@ -809,14 +809,14 @@ int mpc8220_fec_initialize (bd_t * bis) { mpc8220_fec_priv *fec; -#ifdef CONFIG_ETH1ADDR +#ifdef CONFIG_HAS_ETH1 mpc8220_fec_priv *fec2; #endif struct eth_device *dev; char *tmp, *end; char env_enetaddr[6]; -#ifdef CONFIG_ETH1ADDR +#ifdef CONFIG_HAS_ETH1 char env_enet1addr[6]; #endif int i; @@ -826,7 +826,7 @@ int mpc8220_fec_initialize (bd_t * bis) memset (dev, 0, sizeof *dev); fec->eth = (ethernet_regs *) MMAP_FEC1; -#ifdef CONFIG_ETH1ADDR +#ifdef CONFIG_HAS_ETH1 fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec)); fec2->eth = (ethernet_regs *) MMAP_FEC2; #endif @@ -860,7 +860,7 @@ int mpc8220_fec_initialize (bd_t * bis) } mpc8220_fec_set_hwaddr (fec, env_enetaddr); } -#ifdef CONFIG_ETH1ADDR +#ifdef CONFIG_HAS_ETH1 tmp = getenv ("eth1addr"); if (tmp) { for (i = 0; i < 6; i++) { diff --git a/cpu/mpc824x/config.mk b/cpu/mpc824x/config.mk index 5011ddb52f..dac61d8d3e 100644 --- a/cpu/mpc824x/config.mk +++ b/cpu/mpc824x/config.mk @@ -21,6 +21,6 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -ffixed-r29 -mstring -mcpu=603e -msoft-float diff --git a/cpu/mpc8xx/config.mk b/cpu/mpc8xx/config.mk index 94c68db638..bfa6625fa8 100644 --- a/cpu/mpc8xx/config.mk +++ b/cpu/mpc8xx/config.mk @@ -21,6 +21,6 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -ffixed-r29 -mstring -mcpu=860 -msoft-float diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/440gx_enet.c index 1fa84be6e5..d1f4b76869 100644 --- a/cpu/ppc4xx/440gx_enet.c +++ b/cpu/ppc4xx/440gx_enet.c @@ -1176,36 +1176,37 @@ int ppc_440x_eth_initialize (bd_t * bis) /* See if we can actually bring up the interface, otherwise, skip it */ switch (eth_num) { + default: /* fall through */ case 0: if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) { bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; continue; } break; +#ifdef CONFIG_HAS_ETH1 case 1: if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) == 0) { bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; continue; } break; +#endif +#ifdef CONFIG_HAS_ETH2 case 2: if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) == 0) { bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; continue; } break; +#endif +#ifdef CONFIG_HAS_ETH3 case 3: if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) == 0) { bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; continue; } break; - default: - if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) { - bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; - continue; - } - break; +#endif } /* Allocate device structure */ @@ -1227,26 +1228,29 @@ int ppc_440x_eth_initialize (bd_t * bis) } switch (eth_num) { + default: /* fall through */ case 0: hw->hw_addr = 0; memcpy (dev->enetaddr, bis->bi_enetaddr, 6); break; +#ifdef CONFIG_HAS_ETH1 case 1: hw->hw_addr = 0x100; memcpy (dev->enetaddr, bis->bi_enet1addr, 6); break; +#endif +#ifdef CONFIG_HAS_ETH2 case 2: hw->hw_addr = 0x400; memcpy (dev->enetaddr, bis->bi_enet2addr, 6); break; +#endif +#ifdef CONFIG_HAS_ETH3 case 3: hw->hw_addr = 0x600; memcpy (dev->enetaddr, bis->bi_enet3addr, 6); break; - default: - hw->hw_addr = 0; - memcpy (dev->enetaddr, bis->bi_enetaddr, 6); - break; +#endif } hw->devnum = eth_num; diff --git a/cpu/ppc4xx/config.mk b/cpu/ppc4xx/config.mk index bbbf8c2be8..119e061b89 100644 --- a/cpu/ppc4xx/config.mk +++ b/cpu/ppc4xx/config.mk @@ -21,6 +21,6 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -Wa,-m405 -mcpu=405 -msoft-float diff --git a/drivers/i82365.c b/drivers/i82365.c index 1ac50d783a..41b8d42b4c 100644 --- a/drivers/i82365.c +++ b/drivers/i82365.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003 + * (C) Copyright 2003-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -40,32 +40,65 @@ #include #include -#include #include - -/* #define DEBUG */ +#ifdef CONFIG_CPC45 +#include +#else +#include +#endif static struct pci_device_id supported[] = { +#ifdef CONFIG_CPC45 + {PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729}, +#else {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510}, +#endif {0, 0} }; #define CYCLE_TIME 120 +#ifdef CONFIG_CPC45 +extern int SPD67290Init (void); +#endif + #ifdef DEBUG static void i82365_dump_regions (pci_dev_t dev); #endif typedef struct socket_info_t { - pci_dev_t dev; - u_short bcr; - u_char pci_lat, cb_lat, sub_bus, cache; - u_int cb_phys; - - socket_cap_t cap; - ti113x_state_t state; + pci_dev_t dev; + u_short bcr; + u_char pci_lat, cb_lat, sub_bus, cache; + u_int cb_phys; + + socket_cap_t cap; + u_short type; + u_int flags; +#ifdef CONFIG_CPC45 + cirrus_state_t c_state; +#else + ti113x_state_t state; +#endif } socket_info_t; +#ifdef CONFIG_CPC45 +/* These definitions must match the pcic table! */ +typedef enum pcic_id { + IS_PD6710, IS_PD672X, IS_VT83C469 +} pcic_id; + +typedef struct pcic_t { + char *name; +} pcic_t; + +static pcic_t pcic[] = { + {" Cirrus PD6710: "}, + {" Cirrus PD672x: "}, + {" VIA VT83C469: "}, +}; +#endif + static socket_info_t socket; static socket_state_t state; static struct pccard_mem_map mem; @@ -91,6 +124,7 @@ static int pci_writew (socket_info_t * s, int r, u_short v) { return pci_write_config_word (s->dev, r, v); } +#ifndef CONFIG_CPC45 static int pci_readl (socket_info_t * s, int r, u_int * v) { return pci_read_config_dword (s->dev, r, v); @@ -99,14 +133,61 @@ static int pci_writel (socket_info_t * s, int r, u_int v) { return pci_write_config_dword (s->dev, r, v); } +#endif /* !CONFIG_CPC45 */ + +/*====================================================================*/ + +#ifdef CONFIG_CPC45 + +#define cb_readb(s) readb((s)->cb_phys + 1) +#define cb_writeb(s, v) writeb(v, (s)->cb_phys) +#define cb_writeb2(s, v) writeb(v, (s)->cb_phys + 1) +#define cb_readl(s, r) readl((s)->cb_phys + (r)) +#define cb_writel(s, r, v) writel(v, (s)->cb_phys + (r)) + + +static u_char i365_get (socket_info_t * s, u_short reg) +{ + u_char val; + +#ifdef CONFIG_PCMCIA_SLOT_A + int slot = 0; +#else + int slot = 1; +#endif + + val = I365_REG (slot, reg); + + cb_writeb (s, val); + val = cb_readb (s); + + debug ("i365_get slot:%x reg: %x val: %x\n", slot, reg, val); + return val; +} + +static void i365_set (socket_info_t * s, u_short reg, u_char data) +{ +#ifdef CONFIG_PCMCIA_SLOT_A + int slot = 0; +#else + int slot = 1; +#endif + + u_char val = I365_REG (slot, reg); + + cb_writeb (s, val); + cb_writeb2 (s, data); + + debug ("i365_set slot:%x reg: %x data:%x\n", slot, reg, data); +} + +#else /* ! CONFIG_CPC45 */ #define cb_readb(s, r) readb((s)->cb_phys + (r)) #define cb_readl(s, r) readl((s)->cb_phys + (r)) #define cb_writeb(s, r, v) writeb(v, (s)->cb_phys + (r)) #define cb_writel(s, r, v) writel(v, (s)->cb_phys + (r)) -/*====================================================================*/ - static u_char i365_get (socket_info_t * s, u_short reg) { return cb_readb (s, 0x0800 + reg); @@ -116,6 +197,7 @@ static void i365_set (socket_info_t * s, u_short reg, u_char data) { cb_writeb (s, 0x0800 + reg, data); } +#endif /* CONFIG_CPC45 */ static void i365_bset (socket_info_t * s, u_short reg, u_char mask) { @@ -147,6 +229,116 @@ static void i365_set_pair (socket_info_t * s, u_short reg, u_short data) i365_set (s, reg + 1, data >> 8); } +#ifdef CONFIG_CPC45 +/*====================================================================== + + Code to save and restore global state information for Cirrus + PD67xx controllers, and to set and report global configuration + options. + +======================================================================*/ + +#define flip(v,b,f) (v = ((f)<0) ? v : ((f) ? ((v)|(b)) : ((v)&(~b)))) + +static void cirrus_get_state (socket_info_t * s) +{ + int i; + cirrus_state_t *p = &s->c_state; + + p->misc1 = i365_get (s, PD67_MISC_CTL_1); + p->misc1 &= (PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA); + p->misc2 = i365_get (s, PD67_MISC_CTL_2); + for (i = 0; i < 6; i++) + p->timer[i] = i365_get (s, PD67_TIME_SETUP (0) + i); + +} + +static void cirrus_set_state (socket_info_t * s) +{ + int i; + u_char misc; + cirrus_state_t *p = &s->c_state; + + misc = i365_get (s, PD67_MISC_CTL_2); + i365_set (s, PD67_MISC_CTL_2, p->misc2); + if (misc & PD67_MC2_SUSPEND) + udelay (50000); + misc = i365_get (s, PD67_MISC_CTL_1); + misc &= ~(PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA); + i365_set (s, PD67_MISC_CTL_1, misc | p->misc1); + for (i = 0; i < 6; i++) + i365_set (s, PD67_TIME_SETUP (0) + i, p->timer[i]); +} + +static u_int cirrus_set_opts (socket_info_t * s) +{ + cirrus_state_t *p = &s->c_state; + u_int mask = 0xffff; + +#if DEBUG + char buf[200]; + + memset (buf, 0, 200); +#endif + + if (has_ring == -1) + has_ring = 1; + flip (p->misc2, PD67_MC2_IRQ15_RI, has_ring); + flip (p->misc2, PD67_MC2_DYNAMIC_MODE, dynamic_mode); +#if DEBUG + if (p->misc2 & PD67_MC2_IRQ15_RI) + strcat (buf, " [ring]"); + if (p->misc2 & PD67_MC2_DYNAMIC_MODE) + strcat (buf, " [dyn mode]"); + if (p->misc1 & PD67_MC1_INPACK_ENA) + strcat (buf, " [inpack]"); +#endif + + if (p->misc2 & PD67_MC2_IRQ15_RI) + mask &= ~0x8000; + if (has_led > 0) { +#if DEBUG + strcat (buf, " [led]"); +#endif + mask &= ~0x1000; + } + if (has_dma > 0) { +#if DEBUG + strcat (buf, " [dma]"); +#endif + mask &= ~0x0600; + flip (p->misc2, PD67_MC2_FREQ_BYPASS, freq_bypass); +#if DEBUG + if (p->misc2 & PD67_MC2_FREQ_BYPASS) + strcat (buf, " [freq bypass]"); +#endif + } + + if (setup_time >= 0) + p->timer[0] = p->timer[3] = setup_time; + if (cmd_time > 0) { + p->timer[1] = cmd_time; + p->timer[4] = cmd_time * 2 + 4; + } + if (p->timer[1] == 0) { + p->timer[1] = 6; + p->timer[4] = 16; + if (p->timer[0] == 0) + p->timer[0] = p->timer[3] = 1; + } + if (recov_time >= 0) + p->timer[2] = p->timer[5] = recov_time; + + debug ("i82365 Opt: %s [%d/%d/%d] [%d/%d/%d]\n", + buf, + p->timer[0], p->timer[1], p->timer[2], + p->timer[3], p->timer[4], p->timer[5]); + + return mask; +} + +#else /* !CONFIG_CPC45 */ + /*====================================================================== Code to save and restore global state information for TI 1130 and @@ -190,6 +382,7 @@ static u_int ti113x_set_opts (socket_info_t * s) return mask; } +#endif /* CONFIG_CPC45 */ /*====================================================================== @@ -213,8 +406,10 @@ static void cb_get_state (socket_info_t * s) static void cb_set_state (socket_info_t * s) { +#ifndef CONFIG_CPC45 pci_writel (s, CB_LEGACY_MODE_BASE, 0); pci_writel (s, PCI_BASE_ADDRESS_0, s->cb_phys); +#endif pci_writew (s, PCI_COMMAND, CMD_DFLT); pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache); pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat); @@ -226,12 +421,14 @@ static void cb_set_state (socket_info_t * s) static void cb_set_opts (socket_info_t * s) { +#ifndef CONFIG_CPC45 if (s->cache == 0) s->cache = 8; if (s->pci_lat == 0) s->pci_lat = 0xa8; if (s->cb_lat == 0) s->cb_lat = 0xb0; +#endif } /*====================================================================== @@ -245,9 +442,71 @@ static int cb_set_power (socket_info_t * s, socket_state_t * state) { u_int reg = 0; +#ifdef CONFIG_CPC45 + + if ((state->Vcc == 0) && (state->Vpp == 0)) { + u_char power, vcc, vpp; + + power = i365_get (s, I365_POWER); + state->flags |= (power & I365_PWR_AUTO) ? SS_PWR_AUTO : 0; + state->flags |= (power & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0; + vcc = power & I365_VCC_MASK; + vpp = power & I365_VPP1_MASK; + state->Vcc = state->Vpp = 0; + if (i365_get (s, PD67_MISC_CTL_1) & PD67_MC1_VCC_3V) { + if (power & I365_VCC_5V) + state->Vcc = 33; + if (vpp == I365_VPP1_5V) + state->Vpp = 33; + } else { + if (power & I365_VCC_5V) + state->Vcc = 50; + if (vpp == I365_VPP1_5V) + state->Vpp = 50; + } + if (power == I365_VPP1_12V) + state->Vpp = 120; + printf ("POWER Vcc:%d Vpp: %d\n", state->Vcc, state->Vpp); + } + + reg = I365_PWR_NORESET; + if (state->flags & SS_PWR_AUTO) + reg |= I365_PWR_AUTO; + if (state->flags & SS_OUTPUT_ENA) + reg |= I365_PWR_OUT; + if (state->Vpp != 0) { + if (state->Vpp == 120) { + reg |= I365_VPP1_12V; + puts (" 12V card found: "); + } else if (state->Vpp == state->Vcc) { + reg |= I365_VPP1_5V; + puts (" 5V card found: "); + } else { + puts (" power not found: "); + return -1; + } + } + if (state->Vcc != 0) { + reg |= I365_VCC_5V; + if (state->Vcc == 33) { + puts (" 3.3V card found: "); + i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V); + } else if (state->Vcc == 50) { + puts (" 5V card found: "); + i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V); + } else { + puts (" power not found: "); + return -1; + } + } + if (reg != i365_get (s, I365_POWER)) + i365_set (s, I365_POWER, reg); + +#else /* ! CONFIG_CPC45 */ + /* restart card voltage detection if it seems appropriate */ if ((state->Vcc == 0) && (state->Vpp == 0) && - !(cb_readl (s, CB_SOCKET_STATE) & CB_SS_VSENSE)) + !(cb_readl (s, CB_SOCKET_STATE) & CB_SS_VSENSE)) cb_writel (s, CB_SOCKET_FORCE, CB_SF_CVSTEST); switch (state->Vcc) { case 0: @@ -279,6 +538,7 @@ static int cb_set_power (socket_info_t * s, socket_state_t * state) } if (reg != cb_readl (s, CB_SOCKET_CONTROL)) cb_writel (s, CB_SOCKET_CONTROL, reg); +#endif /* CONFIG_CPC45 */ return 0; } @@ -290,7 +550,11 @@ static int cb_set_power (socket_info_t * s, socket_state_t * state) static void get_bridge_state (socket_info_t * s) { +#ifdef CONFIG_CPC45 + cirrus_get_state (s); +#else ti113x_get_state (s); +#endif cb_get_state (s); } @@ -299,12 +563,20 @@ static void set_bridge_state (socket_info_t * s) cb_set_state (s); i365_set (s, I365_GBLCTL, 0x00); i365_set (s, I365_GENCTL, 0x00); +#ifdef CONFIG_CPC45 + cirrus_set_state (s); +#else ti113x_set_state (s); +#endif } static void set_bridge_opts (socket_info_t * s) { +#ifdef CONFIG_CPC45 + cirrus_set_opts (s); +#else ti113x_set_opts (s); +#endif cb_set_opts (s); } @@ -314,6 +586,12 @@ static int i365_get_status (socket_info_t * s, u_int * value) { u_int status; +#ifdef CONFIG_CPC45 + u_char val; + u_char power, vcc, vpp; +#endif + + status = i365_get (s, I365_IDENT); status = i365_get (s, I365_STATUS); *value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0; if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) { @@ -326,6 +604,71 @@ static int i365_get_status (socket_info_t * s, u_int * value) *value |= (status & I365_CS_READY) ? SS_READY : 0; *value |= (status & I365_CS_POWERON) ? SS_POWERON : 0; +#ifdef CONFIG_CPC45 + /* Check for Cirrus CL-PD67xx chips */ + i365_set (s, PD67_CHIP_INFO, 0); + val = i365_get (s, PD67_CHIP_INFO); + s->type = -1; + if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) { + val = i365_get (s, PD67_CHIP_INFO); + if ((val & PD67_INFO_CHIP_ID) == 0) { + s->type = + (val & PD67_INFO_SLOTS) ? IS_PD672X : + IS_PD6710; + i365_set (s, PD67_EXT_INDEX, 0xe5); + if (i365_get (s, PD67_EXT_INDEX) != 0xe5) + s->type = IS_VT83C469; + } + } else { + printf ("no Cirrus Chip found\n"); + *value = 0; + return -1; + } + + i365_bset (s, I365_POWER, I365_VCC_5V); + power = i365_get (s, I365_POWER); + state.flags |= (power & I365_PWR_AUTO) ? SS_PWR_AUTO : 0; + state.flags |= (power & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0; + vcc = power & I365_VCC_MASK; + vpp = power & I365_VPP1_MASK; + state.Vcc = state.Vpp = 0; + if (i365_get (s, PD67_MISC_CTL_1) & PD67_MC1_VCC_3V) { + if (power & I365_VCC_5V) + state.Vcc = 33; + if (vpp == I365_VPP1_5V) + state.Vpp = 33; + } else { + if (power & I365_VCC_5V) + state.Vcc = 50; + if (vpp == I365_VPP1_5V) + state.Vpp = 50; + } + if (power == I365_VPP1_12V) + state.Vpp = 120; + + /* IO card, RESET flags, IO interrupt */ + power = i365_get (s, I365_INTCTL); + state.flags |= (power & I365_PC_RESET) ? 0 : SS_RESET; + if (power & I365_PC_IOCARD) + state.flags |= SS_IOCARD; + state.io_irq = power & I365_IRQ_MASK; + + /* Card status change mask */ + power = i365_get (s, I365_CSCINT); + state.csc_mask = (power & I365_CSC_DETECT) ? SS_DETECT : 0; + if (state.flags & SS_IOCARD) + state.csc_mask |= (power & I365_CSC_STSCHG) ? SS_STSCHG : 0; + else { + state.csc_mask |= (power & I365_CSC_BVD1) ? SS_BATDEAD : 0; + state.csc_mask |= (power & I365_CSC_BVD2) ? SS_BATWARN : 0; + state.csc_mask |= (power & I365_CSC_READY) ? SS_READY : 0; + } + debug ("i82365: GetStatus(0) = flags %#3.3x, Vcc %d, Vpp %d, " + "io_irq %d, csc_mask %#2.2x\n", state.flags, + state.Vcc, state.Vpp, state.io_irq, state.csc_mask); + +#else /* !CONFIG_CPC45 */ + status = cb_readl (s, CB_SOCKET_STATE); *value |= (status & CB_SS_32BIT) ? SS_CARDBUS : 0; *value |= (status & CB_SS_3VCARD) ? SS_3VCARD : 0; @@ -334,7 +677,7 @@ static int i365_get_status (socket_info_t * s, u_int * value) /* For now, ignore cards with unsupported voltage keys */ if (*value & SS_XVCARD) *value &= ~(SS_DETECT | SS_3VCARD | SS_XVCARD); - +#endif /* CONFIG_CPC45 */ return 0; } /* i365_get_status */ @@ -350,6 +693,31 @@ static int i365_set_socket (socket_info_t * s, socket_state_t * state) reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0; i365_set (s, I365_INTCTL, reg); +#ifdef CONFIG_CPC45 + cb_set_power (s, state); + +#if 0 + /* Card status change interrupt mask */ + reg = s->cs_irq << 4; + if (state->csc_mask & SS_DETECT) + reg |= I365_CSC_DETECT; + if (state->flags & SS_IOCARD) { + if (state->csc_mask & SS_STSCHG) + reg |= I365_CSC_STSCHG; + } else { + if (state->csc_mask & SS_BATDEAD) + reg |= I365_CSC_BVD1; + if (state->csc_mask & SS_BATWARN) + reg |= I365_CSC_BVD2; + if (state->csc_mask & SS_READY) + reg |= I365_CSC_READY; + } + i365_set (s, I365_CSCINT, reg); + i365_get (s, I365_CSC); +#endif /* 0 */ + +#else /* !CONFIG_CPC45 */ + reg = I365_PWR_NORESET; if (state->flags & SS_PWR_AUTO) reg |= I365_PWR_AUTO; @@ -361,6 +729,7 @@ static int i365_set_socket (socket_info_t * s, socket_state_t * state) if (reg != i365_get (s, I365_POWER)) i365_set (s, I365_POWER, reg); +#endif /* CONFIG_CPC45 */ return 0; } /* i365_set_socket */ @@ -372,6 +741,10 @@ static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem) u_short base, i; u_char map; + debug ("i82365: SetMemMap(%d, %#2.2x, %d ns, %#5.5lx-%#5.5lx, %#5.5x)\n", + mem->map, mem->flags, mem->speed, + mem->sys_start, mem->sys_stop, mem->card_start); + map = mem->map; if ((map > 4) || (mem->card_start > 0x3ffffff) || @@ -411,13 +784,23 @@ static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem) } i365_set_pair (s, base + I365_W_STOP, i); +#ifdef CONFIG_CPC45 + i = 0; +#else i = ((mem->card_start - mem->sys_start) >> 12) & 0x3fff; +#endif if (mem->flags & MAP_WRPROT) i |= I365_MEM_WRPROT; if (mem->flags & MAP_ATTRIB) i |= I365_MEM_REG; i365_set_pair (s, base + I365_W_OFF, i); +#ifdef CONFIG_CPC45 + /* set System Memory map Upper Adress */ + i365_set(s, PD67_EXT_INDEX, PD67_MEM_PAGE(map)); + i365_set(s, PD67_EXT_DATA, ((mem->sys_start >> 24) & 0xff)); +#endif + /* Turn on the window if necessary */ if (mem->flags & MAP_ACTIVE) i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map)); @@ -431,7 +814,7 @@ static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io) map = io->map; /* comment out: comparison is always false due to limited range of data type */ if ((map > 1) || /* (io->start > 0xffff) || (io->stop > 0xffff) || */ - (io->stop < io->start)) + (io->stop < io->start)) return -1; /* Turn off the window before changing anything */ if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map)) @@ -461,19 +844,37 @@ int i82365_init (void) u_int val; int i; +#ifdef CONFIG_CPC45 + if (SPD67290Init () != 0) + return 1; +#endif if ((socket.dev = pci_find_devices (supported, 0)) < 0) { /* Controller not found */ return 1; } + debug ("i82365 Device Found!\n"); pci_read_config_dword (socket.dev, PCI_BASE_ADDRESS_0, &socket.cb_phys); socket.cb_phys &= ~0xf; +#ifdef CONFIG_CPC45 + /* + 0xfe000000 see MPC 8245 Users Manual Adress Map B */ + socket.cb_phys += 0xfe000000; +#endif + get_bridge_state (&socket); set_bridge_opts (&socket); - i365_get_status (&socket, &val); + i = i365_get_status (&socket, &val); +#ifdef CONFIG_CPC45 + if (i > -1) { + puts (pcic[socket.type].name); + } else { + printf ("i82365: Controller not found.\n"); + return 1; + } +#else /* !CONFIG_CPC45 */ if (val & SS_DETECT) { if (val & SS_3VCARD) { state.Vcc = state.Vpp = 33; @@ -482,17 +883,23 @@ int i82365_init (void) state.Vcc = state.Vpp = 50; puts (" 5.0V card found: "); } else { - printf ("i82365: unsupported voltage key\n"); + puts ("i82365: unsupported voltage key\n"); state.Vcc = state.Vpp = 0; } } else { /* No card inserted */ + puts ("No card\n"); return 1; } +#endif /* CONFIG_CPC45 */ +#ifdef CONFIG_CPC45 + state.flags |= SS_OUTPUT_ENA; +#else state.flags = SS_IOCARD | SS_OUTPUT_ENA; state.csc_mask = 0; state.io_irq = 0; +#endif i365_set_socket (&socket, &state); @@ -504,8 +911,10 @@ int i82365_init (void) if (i == 0) { /* PC Card not ready for data transfer */ + puts ("i82365 PC Card not ready for data transfer\n"); return 1; } + debug (" PC Card ready for data transfer: "); mem.map = 0; mem.flags = MAP_ATTRIB | MAP_ACTIVE; @@ -513,17 +922,28 @@ int i82365_init (void) mem.sys_start = CFG_PCMCIA_MEM_ADDR; mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1; mem.card_start = 0; + i365_set_mem_map (&socket, &mem); +#ifdef CONFIG_CPC45 + mem.map = 1; + mem.flags = MAP_ACTIVE; + mem.speed = 300; + mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE; + mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1; + mem.card_start = 0; i365_set_mem_map (&socket, &mem); +#else /* !CONFIG_CPC45 */ + io.map = 0; io.flags = MAP_AUTOSZ | MAP_ACTIVE; io.speed = 0; io.start = 0x0100; io.stop = 0x010F; - i365_set_io_map (&socket, &io); +#endif /* CONFIG_CPC45 */ + #ifdef DEBUG i82365_dump_regions (socket.dev); #endif @@ -550,8 +970,18 @@ void i82365_exit (void) i365_set_mem_map (&socket, &mem); - socket.state.sysctl &= 0xFFFF00FF; +#ifdef CONFIG_CPC45 + mem.map = 1; + mem.flags = 0; + mem.speed = 0; + mem.sys_start = 0; + mem.sys_stop = 0x1000; + mem.card_start = 0; + i365_set_mem_map (&socket, &mem); +#else /* !CONFIG_CPC45 */ + socket.state.sysctl &= 0xFFFF00FF; +#endif state.Vcc = state.Vpp = 0; i365_set_socket (&socket, &state); @@ -567,7 +997,7 @@ void i82365_exit (void) static void i82365_dump_regions (pci_dev_t dev) { u_int tmp[2]; - u_int *mem = (void *) sock.cb_phys; + u_int *mem = (void *) socket.cb_phys; u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR; u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET); diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h index 72eabb495d..f8282d40c9 100644 --- a/include/asm-ppc/u-boot.h +++ b/include/asm-ppc/u-boot.h @@ -86,15 +86,15 @@ typedef struct bd_info { hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif -#if defined(CONFIG_ETH1ADDR) +#ifdef CONFIG_HAS_ETH1 /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; #endif -#if defined(CONFIG_ETH2ADDR) +#ifdef CONFIG_HAS_ETH2 /* third onboard ethernet port */ unsigned char bi_enet2addr[6]; #endif -#if defined(CONFIG_ETH3ADDR) +#ifdef CONFIG_HAS_ETH3 unsigned char bi_enet3addr[6]; #endif diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index 5cf2a04119..5ab6fe63f8 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -106,6 +106,7 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTARGS "root=/dev/ram rw" #define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 #define CONFIG_IPADDR 192.162.1.2 #define CONFIG_NETMASK 255.255.255.0 diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 15420474df..d64dd2a17e 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -98,6 +98,7 @@ /* Ethernet stuff */ #define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */ #define CONFIG_ETHADDR 00:50:C2:1E:AF:FE +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 5a00133775..8de981981d 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -50,8 +50,6 @@ #define CONFIG_BAUDRATE 9600 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" #define CONFIG_BOOTDELAY 5 @@ -63,7 +61,10 @@ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_EEPROM | \ + CFG_CMD_FAT | \ + CFG_CMD_FLASH | \ CFG_CMD_I2C | \ + CFG_CMD_IDE | \ CFG_CMD_PCI | \ CFG_CMD_SDRAM ) @@ -344,7 +345,7 @@ #define ST16552_B_BASE 0x80400000 /* ST16552 channel A */ #define BCSR_BASE 0x80600000 /* board control / status registers */ #define DISPLAY_BASE 0x80600040 /* DISPLAY base */ -#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */ +#define PCMCIA_MEM_BASE 0x83000000 /* PCMCIA memory window base */ #define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */ @@ -464,4 +465,46 @@ #define PCI_ENET0_MEMADDR 0x82000000 #define PCI_PLX9030_IOADDR 0x82100000 #define PCI_PLX9030_MEMADDR 0x82100000 + +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + */ + +#define CONFIG_I82365 + +#define CFG_PCMCIA_MEM_ADDR PCMCIA_MEM_BASE +#define CFG_PCMCIA_MEM_SIZE 0x1000 + +#define CONFIG_PCMCIA_SLOT_A + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_RESET /* reset for IDE not supported */ +#define CONFIG_IDE_LED /* LED for IDE is supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_HMI10 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR + +#define CFG_ATA_DATA_OFFSET CFG_PCMCIA_MEM_SIZE + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET CFG_PCMCIA_MEM_SIZE + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x400) + +#define CONFIG_DOS_PARTITION + #endif /* __CONFIG_H */ diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index e318b274a7..d6ce8a873b 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -105,6 +105,7 @@ /* first ethernet */ #define CONFIG_ETHADDR 64:36:00:00:00:01 /* next two ethernet hwaddrs */ +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 64:36:00:00:00:02 /* in the atlantis 64360 we have only 2 ETH port on the board, if we use PCI it has its own MAC addr */ diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index e58b63a458..fb0248102f 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -43,7 +43,9 @@ #define __LOCAL_H #define CONFIG_ETHADDR 64:46:00:00:00:01 +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 64:46:00:00:00:02 +#define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 64:46:00:00:00:03 #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/G2000.h b/include/configs/G2000.h index df4ed3902f..af96c7c70c 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -164,6 +164,7 @@ /* adding Ethernet setting: FTS OUI 00:11:0B */ /*----------------------------------------------------------------------------*/ #define CONFIG_ETHADDR 00:11:0B:00:00:01 +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:11:0B:00:00:02 #define CONFIG_IPADDR 10.48.8.178 #define CONFIG_IP1ADDR 10.48.8.188 diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 57212e0f69..2d7cf2f2e2 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -126,6 +126,7 @@ /* Ethernet stuff */ #define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */ #define CONFIG_ETHADDR 00:50:C2:1E:AF:FE +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD /*----------------------------------------------------------------------- diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index 9ec1c0834b..8aa18caa7e 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -177,8 +177,10 @@ /* Environment is in flash, there is little space left in Serial EEPROM */ #define CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */ +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) /*----------------------------------------------------------------------- * Hard Reset Configuration Words diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 17402f0c9f..91011be367 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -90,6 +90,7 @@ & ~CFG_CMD_DTT \ & ~CFG_CMD_EEPROM \ & ~CFG_CMD_ELF \ + & ~CFG_CMD_EXT2 \ & ~CFG_CMD_FDC \ & ~CFG_CMD_FDOS \ & ~CFG_CMD_HWFLOW \ @@ -106,6 +107,7 @@ & ~CFG_CMD_REISER \ & ~CFG_CMD_SCSI \ & ~CFG_CMD_SPI \ + & ~CFG_CMD_UNIVERSE\ & ~CFG_CMD_USB \ & ~CFG_CMD_VFD \ & ~CFG_CMD_XIMG ) diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 0d5b05a803..6b7bdda77d 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -185,6 +185,7 @@ CFG_CMD_DTT | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ + CFG_CMD_EXT2 | \ CFG_CMD_FAT | \ CFG_CMD_FDC | \ CFG_CMD_FDOS | \ @@ -198,6 +199,7 @@ CFG_CMD_REISER | \ CFG_CMD_SCSI | \ CFG_CMD_SPI | \ + CFG_CMD_UNIVERSE | \ CFG_CMD_USB | \ CFG_CMD_VFD | \ CFG_CMD_XIMG diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index a4018f8ced..88efd956d7 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -155,6 +155,7 @@ CFG_CMD_DTT | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ + CFG_CMD_EXT2 | \ CFG_CMD_FDC | \ CFG_CMD_FDOS | \ CFG_CMD_HWFLOW | \ @@ -168,6 +169,7 @@ CFG_CMD_SCSI | \ CFG_CMD_SPI | \ CFG_CMD_VFD | \ + CFG_CMD_UNIVERSE | \ CFG_CMD_USB | \ CFG_CMD_XIMG ) ) diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index a53b963edc..874e962d1e 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -458,7 +458,9 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_ETHADDR 00:E0:0C:00:00:FD +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD +#define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 9824241408..d4cba338b3 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -415,7 +415,9 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_ETHADDR 00:E0:0C:00:00:FD +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD +#define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 6b4191ef96..49518d8583 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -415,7 +415,9 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_ETHADDR 00:E0:0C:00:00:FD +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD +#define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 2a31dd7d93..d58e6a7059 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -504,7 +504,9 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) #define CONFIG_ETHADDR 00:E0:0C:00:00:FD +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD +#define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif diff --git a/include/configs/OCOTEA.h b/include/configs/OCOTEA.h index 6f8fd1d55c..f69ab1b631 100644 --- a/include/configs/OCOTEA.h +++ b/include/configs/OCOTEA.h @@ -154,8 +154,11 @@ #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 10.1.2.3 #define CONFIG_ETHADDR 00:04:AC:E3:28:8A +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:04:AC:E3:28:8B +#define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:04:AC:E3:28:8C +#define CONFIG_HAS_ETH3 #define CONFIG_ETH3ADDR 00:04:AC:E3:28:8D #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ #define CONFIG_SERVERIP 10.1.2.2 diff --git a/include/configs/PN62.h b/include/configs/PN62.h index c58e990a19..5f748a0366 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -102,6 +102,8 @@ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */ +#define CONFIG_HAS_ETH1 1 /* add support for eth1addr */ + #define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ /* diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 03020f2890..2ffe89f8c6 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -92,6 +92,7 @@ /* Ethernet stuff */ #define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */ #define CONFIG_ETHADDR 00:50:c2:1e:af:fe +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 3592290d50..4623dbb887 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -98,6 +98,7 @@ ~CFG_CMD_BSP & \ ~CFG_CMD_DATE & \ ~CFG_CMD_DTT & \ + ~CFG_CMD_EXT2 & \ ~CFG_CMD_FDC & \ ~CFG_CMD_FDOS & \ ~CFG_CMD_HWFLOW & \ @@ -113,6 +114,7 @@ ~CFG_CMD_SCSI & \ ~CFG_CMD_SETGETDCR & \ ~CFG_CMD_SPI & \ + ~CFG_CMD_UNIVERSE & \ ~CFG_CMD_USB & \ ~CFG_CMD_VFD & \ ~CFG_CMD_XIMG ) diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 3a09de91a7..60561eb22b 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -400,9 +400,11 @@ /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a - #define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b - #define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c +# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a +# define CONFIG_HAS_ETH1 +# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b +# define CONFIG_HAS_ETH2 +# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c #endif #define CONFIG_SERVERIP YourServerIP diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h index 8e3c3923d3..6bd0abe763 100644 --- a/include/configs/SBC8560.h +++ b/include/configs/SBC8560.h @@ -388,9 +388,11 @@ /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a - #define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b - #define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c +# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a +# define CONFIG_HAS_ETH1 +# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b +# define CONFIG_HAS_ETH2 +# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c #endif #define CONFIG_SERVERIP YourServerIP diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index d6fa798075..195c036bb9 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -81,6 +81,8 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif +#define CONFIG_HAS_ETH1 + /*----------------------------------------------------------------------- * Definitions for status LED */ diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h index 3cc4ff41a1..023570077e 100644 --- a/include/configs/XPEDITE1K.h +++ b/include/configs/XPEDITE1K.h @@ -177,6 +177,10 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */ +#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */ + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_PCI | \ CFG_CMD_IRQ | \ @@ -186,7 +190,7 @@ extern void out32(unsigned int, unsigned long); CFG_CMD_EEPROM | \ CFG_CMD_PING | \ CFG_CMD_ELF | \ - CFG_CMD_MII | \ + CFG_CMD_MII | \ CFG_CMD_DIAG | \ CFG_CMD_FAT ) diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index a17d035300..1f9de350c8 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -277,6 +277,7 @@ CFG_CMD_DOC | \ CFG_CMD_DTT | \ CFG_CMD_EEPROM | \ + CFG_CMD_EXT2 | \ CFG_CMD_FDC | \ CFG_CMD_FDOS | \ CFG_CMD_HWFLOW | \ @@ -291,6 +292,7 @@ CFG_CMD_REISER | \ CFG_CMD_SCSI | \ CFG_CMD_SPI | \ + CFG_CMD_UNIVERSE| \ CFG_CMD_USB | \ CFG_CMD_VFD | \ CFG_CMD_XIMG ) ) diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 6f19909614..90d6b25bdb 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -177,6 +177,7 @@ CFG_CMD_BEDBUG | \ CFG_CMD_BMP | \ CFG_CMD_DOC | \ + CFG_CMD_EXT2 | \ CFG_CMD_FDC | \ CFG_CMD_FDOS | \ CFG_CMD_FPGA | \ @@ -191,6 +192,7 @@ CFG_CMD_REISER | \ CFG_CMD_SCSI | \ CFG_CMD_SPI | \ + CFG_CMD_UNIVERSE| \ CFG_CMD_VFD | \ CFG_CMD_XIMG ) ) diff --git a/include/configs/ml300.h b/include/configs/ml300.h index d36e3c725a..abad059ccf 100644 --- a/include/configs/ml300.h +++ b/include/configs/ml300.h @@ -58,7 +58,7 @@ #define CONFIG_SYSTEMACE 1 #define CONFIG_DOS_PARTITION 1 -#define CFG_SYSTEMACE_BASE XPAR_SYSACE_0_BASEADDR +#define CFG_SYSTEMACE_BASE XPAR_OPB_SYSACE_0_BASEADDR #define CFG_SYSTEMACE_WIDTH XPAR_XSYSACE_MEM_WIDTH #define CFG_ENV_IS_IN_EEPROM 1 /* environment is in EEPROM */ diff --git a/include/configs/quantum.h b/include/configs/quantum.h index d0ee7295b9..9140efb87a 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -199,7 +199,8 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x00F40000 /* Offset of Environment Sector absolute address 0xfff40000*/ -#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE #define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) /* Address and size of Redundant Environment Sector */ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index cf5ef63d1a..8cf9eeb3d4 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -382,9 +382,11 @@ /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_ETHADDR 00:01:af:07:9b:8a - #define CONFIG_ETH1ADDR 00:01:af:07:9b:8b - #define CONFIG_ETH2ADDR 00:01:af:07:9b:8c +# define CONFIG_ETHADDR 00:01:af:07:9b:8a +# define CONFIG_HAS_ETH1 +# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b +# define CONFIG_HAS_ETH2 +# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c #endif #define CONFIG_SERVERIP 192.168.0.131 diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index f5b4836d70..e9261db30a 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -368,8 +368,10 @@ /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a +#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a +#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b +#define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c #endif diff --git a/include/pcmcia/cirrus.h b/include/pcmcia/cirrus.h new file mode 100644 index 0000000000..f53b85a323 --- /dev/null +++ b/include/pcmcia/cirrus.h @@ -0,0 +1,174 @@ +/* + * cirrus.h 1.4 1999/10/25 20:03:34 + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in which + * case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#ifndef _LINUX_CIRRUS_H +#define _LINUX_CIRRUS_H + +#ifndef PCI_VENDOR_ID_CIRRUS +#define PCI_VENDOR_ID_CIRRUS 0x1013 +#endif +#ifndef PCI_DEVICE_ID_CIRRUS_6729 +#define PCI_DEVICE_ID_CIRRUS_6729 0x1100 +#endif +#ifndef PCI_DEVICE_ID_CIRRUS_6832 +#define PCI_DEVICE_ID_CIRRUS_6832 0x1110 +#endif + +#define PD67_MISC_CTL_1 0x16 /* Misc control 1 */ +#define PD67_FIFO_CTL 0x17 /* FIFO control */ +#define PD67_MISC_CTL_2 0x1E /* Misc control 2 */ +#define PD67_CHIP_INFO 0x1f /* Chip information */ +#define PD67_ATA_CTL 0x026 /* 6730: ATA control */ +#define PD67_EXT_INDEX 0x2e /* Extension index */ +#define PD67_EXT_DATA 0x2f /* Extension data */ + +/* PD6722 extension registers -- indexed in PD67_EXT_INDEX */ +#define PD67_DATA_MASK0 0x01 /* Data mask 0 */ +#define PD67_DATA_MASK1 0x02 /* Data mask 1 */ +#define PD67_DMA_CTL 0x03 /* DMA control */ + +/* PD6730 extension registers -- indexed in PD67_EXT_INDEX */ +#define PD67_EXT_CTL_1 0x03 /* Extension control 1 */ +#define PD67_MEM_PAGE(n) ((n)+5) /* PCI window bits 31:24 */ +#define PD67_EXTERN_DATA 0x0a +#define PD67_MISC_CTL_3 0x25 +#define PD67_SMB_PWR_CTL 0x26 + +/* I/O window address offset */ +#define PD67_IO_OFF(w) (0x36+((w)<<1)) + +/* Timing register sets */ +#define PD67_TIME_SETUP(n) (0x3a + 3*(n)) +#define PD67_TIME_CMD(n) (0x3b + 3*(n)) +#define PD67_TIME_RECOV(n) (0x3c + 3*(n)) + +/* Flags for PD67_MISC_CTL_1 */ +#define PD67_MC1_5V_DET 0x01 /* 5v detect */ +#define PD67_MC1_MEDIA_ENA 0x01 /* 6730: Multimedia enable */ +#define PD67_MC1_VCC_3V 0x02 /* 3.3v Vcc */ +#define PD67_MC1_PULSE_MGMT 0x04 +#define PD67_MC1_PULSE_IRQ 0x08 +#define PD67_MC1_SPKR_ENA 0x10 +#define PD67_MC1_INPACK_ENA 0x80 + +/* Flags for PD67_FIFO_CTL */ +#define PD67_FIFO_EMPTY 0x80 + +/* Flags for PD67_MISC_CTL_2 */ +#define PD67_MC2_FREQ_BYPASS 0x01 +#define PD67_MC2_DYNAMIC_MODE 0x02 +#define PD67_MC2_SUSPEND 0x04 +#define PD67_MC2_5V_CORE 0x08 +#define PD67_MC2_LED_ENA 0x10 /* IRQ 12 is LED enable */ +#define PD67_MC2_FAST_PCI 0x10 /* 6729: PCI bus > 25 MHz */ +#define PD67_MC2_3STATE_BIT7 0x20 /* Floppy change bit */ +#define PD67_MC2_DMA_MODE 0x40 +#define PD67_MC2_IRQ15_RI 0x80 /* IRQ 15 is ring enable */ + +/* Flags for PD67_CHIP_INFO */ +#define PD67_INFO_SLOTS 0x20 /* 0 = 1 slot, 1 = 2 slots */ +#define PD67_INFO_CHIP_ID 0xc0 +#define PD67_INFO_REV 0x1c + +/* Fields in PD67_TIME_* registers */ +#define PD67_TIME_SCALE 0xc0 +#define PD67_TIME_SCALE_1 0x00 +#define PD67_TIME_SCALE_16 0x40 +#define PD67_TIME_SCALE_256 0x80 +#define PD67_TIME_SCALE_4096 0xc0 +#define PD67_TIME_MULT 0x3f + +/* Fields in PD67_DMA_CTL */ +#define PD67_DMA_MODE 0xc0 +#define PD67_DMA_OFF 0x00 +#define PD67_DMA_DREQ_INPACK 0x40 +#define PD67_DMA_DREQ_WP 0x80 +#define PD67_DMA_DREQ_BVD2 0xc0 +#define PD67_DMA_PULLUP 0x20 /* Disable socket pullups? */ + +/* Fields in PD67_EXT_CTL_1 */ +#define PD67_EC1_VCC_PWR_LOCK 0x01 +#define PD67_EC1_AUTO_PWR_CLEAR 0x02 +#define PD67_EC1_LED_ENA 0x04 +#define PD67_EC1_INV_CARD_IRQ 0x08 +#define PD67_EC1_INV_MGMT_IRQ 0x10 +#define PD67_EC1_PULLUP_CTL 0x20 + +/* Fields in PD67_MISC_CTL_3 */ +#define PD67_MC3_IRQ_MASK 0x03 +#define PD67_MC3_IRQ_PCPCI 0x00 +#define PD67_MC3_IRQ_EXTERN 0x01 +#define PD67_MC3_IRQ_PCIWAY 0x02 +#define PD67_MC3_IRQ_PCI 0x03 +#define PD67_MC3_PWR_MASK 0x0c +#define PD67_MC3_PWR_SERIAL 0x00 +#define PD67_MC3_PWR_TI2202 0x08 +#define PD67_MC3_PWR_SMB 0x0c + +/* Register definitions for Cirrus PD6832 PCI-to-CardBus bridge */ + +/* PD6832 extension registers -- indexed in PD67_EXT_INDEX */ +#define PD68_EXT_CTL_2 0x0b +#define PD68_PCI_SPACE 0x22 +#define PD68_PCCARD_SPACE 0x23 +#define PD68_WINDOW_TYPE 0x24 +#define PD68_EXT_CSC 0x2e +#define PD68_MISC_CTL_4 0x2f +#define PD68_MISC_CTL_5 0x30 +#define PD68_MISC_CTL_6 0x31 + +/* Extra flags in PD67_MISC_CTL_3 */ +#define PD68_MC3_HW_SUSP 0x10 +#define PD68_MC3_MM_EXPAND 0x40 +#define PD68_MC3_MM_ARM 0x80 + +/* Bridge Control Register */ +#define PD6832_BCR_MGMT_IRQ_ENA 0x0800 + +/* Socket Number Register */ +#define PD6832_SOCKET_NUMBER 0x004c /* 8 bit */ + + +typedef struct cirrus_state_t { + u_char misc1, misc2; + u_char timer[6]; +} cirrus_state_t; + +/* Cirrus options */ +static int has_dma = -1; +static int has_led = -1; +static int has_ring = -1; +static int dynamic_mode = 0; +static int freq_bypass = -1; +static int setup_time = -1; +static int cmd_time = -1; +static int recov_time = -1; + + +#endif /* _LINUX_CIRRUS_H */ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index cc9b479780..c6f5b18139 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -805,7 +805,7 @@ void board_init_r (gd_t *id, ulong dest_addr) load_sernum_ethaddr (); #endif -#if defined(CONFIG_ETH1ADDR) +#ifdef CONFIG_HAS_ETH1 /* handle the 2nd ethernet address */ s = getenv ("eth1addr"); @@ -816,7 +816,7 @@ void board_init_r (gd_t *id, ulong dest_addr) s = (*e) ? e + 1 : e; } #endif -#if defined(CONFIG_ETH2ADDR) +#ifdef CONFIG_HAS_ETH2 /* handle the 3rd ethernet address */ s = getenv ("eth2addr"); @@ -832,7 +832,7 @@ void board_init_r (gd_t *id, ulong dest_addr) } #endif -#if defined(CONFIG_ETH3ADDR) +#ifdef CONFIG_HAS_ETH3 /* handle 4th ethernet address */ s = getenv("eth3addr"); #if defined(CONFIG_XPEDITE1K) diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index 409adff665..09b8b5d7a7 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -106,6 +106,9 @@ static uchar default_environment[] = { #ifdef CONFIG_ETH2ADDR "eth2addr=" MK_STR (CONFIG_ETH2ADDR) "\0" #endif +#ifdef CONFIG_ETH3ADDR + "eth3addr=" MK_STR (CONFIG_ETH3ADDR) "\0" +#endif #ifdef CONFIG_ETHPRIME "ethprime=" CONFIG_ETHPRIME "\0" #endif -- 2.25.1