From e077f36436dda2461ffeeb44fac3f55f21e94850 Mon Sep 17 00:00:00 2001 From: Jo-Philipp Wich Date: Wed, 17 Nov 2010 14:31:14 +0000 Subject: [PATCH] libiwinfo: fix several nl80211 issues, detect used WEP mode in madwifi --- contrib/package/iwinfo/src/include/nl80211.h | 236 ++++++++++++++++--- contrib/package/iwinfo/src/iwinfo_madwifi.c | 28 ++- contrib/package/iwinfo/src/iwinfo_nl80211.c | 121 +++++----- 3 files changed, 286 insertions(+), 99 deletions(-) diff --git a/contrib/package/iwinfo/src/include/nl80211.h b/contrib/package/iwinfo/src/include/nl80211.h index 64fb32b93..999e35421 100644 --- a/contrib/package/iwinfo/src/include/nl80211.h +++ b/contrib/package/iwinfo/src/include/nl80211.h @@ -39,6 +39,43 @@ * TODO: need more info? */ +/** + * DOC: Frame transmission/registration support + * + * Frame transmission and registration support exists to allow userspace + * management entities such as wpa_supplicant react to management frames + * that are not being handled by the kernel. This includes, for example, + * certain classes of action frames that cannot be handled in the kernel + * for various reasons. + * + * Frame registration is done on a per-interface basis and registrations + * cannot be removed other than by closing the socket. It is possible to + * specify a registration filter to register, for example, only for a + * certain type of action frame. In particular with action frames, those + * that userspace registers for will not be returned as unhandled by the + * driver, so that the registered application has to take responsibility + * for doing that. + * + * The type of frame that can be registered for is also dependent on the + * driver and interface type. The frame types are advertised in wiphy + * attributes so applications know what to expect. + * + * NOTE: When an interface changes type while registrations are active, + * these registrations are ignored until the interface type is + * changed again. This means that changing the interface type can + * lead to a situation that couldn't otherwise be produced, but + * any such registrations will be dormant in the sense that they + * will not be serviced, i.e. they will not receive any frames. + * + * Frame transmission allows userspace to send for example the required + * responses to action frames. It is subject to some sanity checking, + * but many frames can be transmitted. When a frame was transmitted, its + * status is indicated to the sending socket. + * + * For more technical details, see the corresponding command descriptions + * below. + */ + /** * enum nl80211_commands - supported nl80211 commands * @@ -258,7 +295,9 @@ * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT. + * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. * It is also sent as an event, with the BSSID and response IEs when the * connection is established or failed to be established. This can be * determined by the STATUS_CODE attribute. @@ -276,8 +315,8 @@ * channel for the specified amount of time. This can be used to do * off-channel operations like transmit a Public Action frame and wait for * a response while being associated to an AP on another channel. - * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which - * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the + * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus + * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be * optionally used to specify additional channel parameters. * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds @@ -301,16 +340,20 @@ * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface * and @NL80211_ATTR_TX_RATES the set of allowed rates. * - * @NL80211_CMD_REGISTER_ACTION: Register for receiving certain action frames - * (via @NL80211_CMD_ACTION) for processing in userspace. This command - * requires an interface index and a match attribute containing the first - * few bytes of the frame that should match, e.g. a single byte for only - * a category match or four bytes for vendor frames including the OUI. - * The registration cannot be dropped, but is removed automatically - * when the netlink socket is closed. Multiple registrations can be made. - * @NL80211_CMD_ACTION: Action frame TX request and RX notification. This - * command is used both as a request to transmit an Action frame and as an - * event indicating reception of an Action frame that was not processed in + * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames + * (via @NL80211_CMD_FRAME) for processing in userspace. This command + * requires an interface index, a frame type attribute (optional for + * backward compatibility reasons, if not given assumes action frames) + * and a match attribute containing the first few bytes of the frame + * that should match, e.g. a single byte for only a category match or + * four bytes for vendor frames including the OUI. The registration + * cannot be dropped, but is removed automatically when the netlink + * socket is closed. Multiple registrations can be made. + * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for + * backward compatibility + * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This + * command is used both as a request to transmit a management frame and + * as an event indicating reception of a frame that was not processed in * kernel code, but is for us (i.e., which may need to be processed in a * user space application). %NL80211_ATTR_FRAME is used to specify the * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and @@ -320,11 +363,14 @@ * operational channel). When called, this operation returns a cookie * (%NL80211_ATTR_COOKIE) that will be included with the TX status event * pertaining to the TX request. - * @NL80211_CMD_ACTION_TX_STATUS: Report TX status of an Action frame - * transmitted with %NL80211_CMD_ACTION. %NL80211_ATTR_COOKIE identifies + * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. + * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame + * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies * the TX command and %NL80211_ATTR_FRAME includes the contents of the * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged * the frame. + * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for + * backward compatibility. * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command * is used to configure connection quality monitoring notification trigger * levels. @@ -341,6 +387,8 @@ * of any other interfaces, and other interfaces will again take * precedence when they are used. * + * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -429,9 +477,12 @@ enum nl80211_commands { NL80211_CMD_SET_TX_BITRATE_MASK, - NL80211_CMD_REGISTER_ACTION, - NL80211_CMD_ACTION, - NL80211_CMD_ACTION_TX_STATUS, + NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_FRAME, + NL80211_CMD_ACTION = NL80211_CMD_FRAME, + NL80211_CMD_FRAME_TX_STATUS, + NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, NL80211_CMD_SET_POWER_SAVE, NL80211_CMD_GET_POWER_SAVE, @@ -440,6 +491,7 @@ enum nl80211_commands { NL80211_CMD_NOTIFY_CQM, NL80211_CMD_SET_CHANNEL, + NL80211_CMD_SET_WDS_PEER, /* add new commands above here */ @@ -639,6 +691,15 @@ enum nl80211_commands { * request, the driver will assume that the port is unauthorized until * authorized by user space. Otherwise, port is marked authorized by * default in station mode. + * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the + * ethertype that will be used for key negotiation. It can be + * specified with the associate and connect commands. If it is not + * specified, the value defaults to 0x888E (PAE, 802.1X). This + * attribute is also used as a flag in the wiphy information to + * indicate that protocols other than PAE are supported. + * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom + * ethertype frames used for key negotiation must not be encrypted. * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. @@ -708,7 +769,16 @@ enum nl80211_commands { * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. * * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain - * at least one byte, currently used with @NL80211_CMD_REGISTER_ACTION. + * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. + * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the + * @NL80211_CMD_REGISTER_FRAME command. + * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be transmitted with + * %NL80211_CMD_FRAME. + * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be registered for RX. * * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. @@ -725,6 +795,17 @@ enum nl80211_commands { * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations * connected to this BSS. * + * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See + * &enum nl80211_tx_power_setting for possible values. + * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. + * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING + * for non-automatic settings. + * + * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly + * means support for per-station GTKs. + * + * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -882,6 +963,20 @@ enum nl80211_attrs { NL80211_ATTR_AP_ISOLATE, + NL80211_ATTR_WIPHY_TX_POWER_SETTING, + NL80211_ATTR_WIPHY_TX_POWER_LEVEL, + + NL80211_ATTR_TX_FRAME_TYPES, + NL80211_ATTR_RX_FRAME_TYPES, + NL80211_ATTR_FRAME_TYPE, + + NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + + NL80211_ATTR_SUPPORT_IBSS_RSN, + + NL80211_ATTR_MCAST_RATE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -937,8 +1032,10 @@ enum nl80211_attrs { * @NL80211_IFTYPE_WDS: wireless distribution interface * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames * @NL80211_IFTYPE_MESH_POINT: mesh point + * @NL80211_IFTYPE_P2P_CLIENT: P2P client + * @NL80211_IFTYPE_P2P_GO: P2P group owner * @NL80211_IFTYPE_MAX: highest interface type number currently defined - * @__NL80211_IFTYPE_AFTER_LAST: internal use + * @NUM_NL80211_IFTYPES: number of defined interface types * * These values are used with the %NL80211_ATTR_IFTYPE * to set the type of an interface. @@ -953,10 +1050,12 @@ enum nl80211_iftype { NL80211_IFTYPE_WDS, NL80211_IFTYPE_MONITOR, NL80211_IFTYPE_MESH_POINT, + NL80211_IFTYPE_P2P_CLIENT, + NL80211_IFTYPE_P2P_GO, /* keep last */ - __NL80211_IFTYPE_AFTER_LAST, - NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1 + NUM_NL80211_IFTYPES, + NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 }; /** @@ -965,11 +1064,14 @@ enum nl80211_iftype { * Station flags. When a station is added to an AP interface, it is * assumed to be already associated (and hence authenticated.) * + * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames * with short barker preamble * @NL80211_STA_FLAG_WME: station is WME/QoS capable * @NL80211_STA_FLAG_MFP: station uses management frame protection + * @NL80211_STA_FLAG_MAX: highest station flag number currently defined + * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ enum nl80211_sta_flags { __NL80211_STA_FLAG_INVALID, @@ -1039,6 +1141,8 @@ enum nl80211_rate_info { * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this * station) + * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) + * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) */ enum nl80211_sta_info { __NL80211_STA_INFO_INVALID, @@ -1052,6 +1156,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_TX_BITRATE, NL80211_STA_INFO_RX_PACKETS, NL80211_STA_INFO_TX_PACKETS, + NL80211_STA_INFO_TX_RETRIES, + NL80211_STA_INFO_TX_FAILED, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1082,14 +1188,17 @@ enum nl80211_mpath_flags { * information about a mesh path. * * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved - * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination - * @NL80211_ATTR_MPATH_SN: destination sequence number - * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path - * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now - * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in + * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination + * @NL80211_MPATH_INFO_SN: destination sequence number + * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path + * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now + * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in * &enum nl80211_mpath_flags; - * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec - * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries + * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec + * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries + * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number + * currently defind + * @__NL80211_MPATH_INFO_AFTER_LAST: internal use */ enum nl80211_mpath_info { __NL80211_MPATH_INFO_INVALID, @@ -1118,6 +1227,8 @@ enum nl80211_mpath_info { * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined + * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ enum nl80211_band_attr { __NL80211_BAND_ATTR_INVALID, @@ -1138,6 +1249,7 @@ enum nl80211_band_attr { /** * enum nl80211_frequency_attr - frequency attributes + * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current * regulatory domain. @@ -1149,6 +1261,9 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number + * currently defined + * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, @@ -1168,9 +1283,13 @@ enum nl80211_frequency_attr { /** * enum nl80211_bitrate_attr - bitrate attributes + * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported * in 2.4 GHz band. + * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number + * currently defined + * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use */ enum nl80211_bitrate_attr { __NL80211_BITRATE_ATTR_INVALID, @@ -1226,6 +1345,7 @@ enum nl80211_reg_type { /** * enum nl80211_reg_rule_attr - regulatory rule attributes + * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional * considerations for a given frequency range. These are the * &enum nl80211_reg_rule_flags. @@ -1242,6 +1362,9 @@ enum nl80211_reg_type { * If you don't have one then don't send this. * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for * a given frequency range. The value is in mBm (100 * dBm). + * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number + * currently defined + * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use */ enum nl80211_reg_rule_attr { __NL80211_REG_RULE_ATTR_INVALID, @@ -1293,11 +1416,31 @@ enum nl80211_reg_rule_flags { * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used + * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio + * spent on this channel + * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary + * channel was sensed busy (either due to activity or energy detect) + * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension + * channel was sensed busy + * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent + * receiving data + * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent + * transmitting data + * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number + * currently defined + * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use */ enum nl80211_survey_info { __NL80211_SURVEY_INFO_INVALID, NL80211_SURVEY_INFO_FREQUENCY, NL80211_SURVEY_INFO_NOISE, + NL80211_SURVEY_INFO_IN_USE, + NL80211_SURVEY_INFO_CHANNEL_TIME, + NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, + NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, + NL80211_SURVEY_INFO_CHANNEL_TIME_RX, + NL80211_SURVEY_INFO_CHANNEL_TIME_TX, /* keep last */ __NL80211_SURVEY_INFO_AFTER_LAST, @@ -1457,6 +1600,7 @@ enum nl80211_channel_type { * enum nl80211_bss - netlink attributes for a BSS * * @__NL80211_BSS_INVALID: invalid + * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) @@ -1500,6 +1644,12 @@ enum nl80211_bss { /** * enum nl80211_bss_status - BSS "status" + * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. + * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. + * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. + * + * The BSS status is a BSS attribute in scan dumps, which + * indicates the status the interface has wrt. this BSS. */ enum nl80211_bss_status { NL80211_BSS_STATUS_AUTHENTICATED, @@ -1537,11 +1687,14 @@ enum nl80211_auth_type { * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) + * @NUM_NL80211_KEYTYPES: number of defined key types */ enum nl80211_key_type { NL80211_KEYTYPE_GROUP, NL80211_KEYTYPE_PAIRWISE, NL80211_KEYTYPE_PEERKEY, + + NUM_NL80211_KEYTYPES }; /** @@ -1572,6 +1725,9 @@ enum nl80211_wpa_versions { * CCMP keys, each six bytes in little endian * @NL80211_KEY_DEFAULT: flag indicating default key * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key + * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not + * specified the default depends on whether a MAC address was + * given with the command using the key or not (u32) * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute */ @@ -1583,6 +1739,7 @@ enum nl80211_key_attributes { NL80211_KEY_SEQ, NL80211_KEY_DEFAULT, NL80211_KEY_DEFAULT_MGMT, + NL80211_KEY_TYPE, /* keep last */ __NL80211_KEY_AFTER_LAST, @@ -1610,8 +1767,8 @@ enum nl80211_tx_rate_attributes { /** * enum nl80211_band - Frequency band - * @NL80211_BAND_2GHZ - 2.4 GHz ISM band - * @NL80211_BAND_5GHZ - around 5 GHz band (4.9 - 5.7 GHz) + * @NL80211_BAND_2GHZ: 2.4 GHz ISM band + * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) */ enum nl80211_band { NL80211_BAND_2GHZ, @@ -1649,9 +1806,9 @@ enum nl80211_attr_cqm { /** * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event - * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW - The RSSI level is lower than the + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the * configured threshold - * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH - The RSSI is higher than the + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the * configured threshold */ enum nl80211_cqm_rssi_threshold_event { @@ -1659,4 +1816,17 @@ enum nl80211_cqm_rssi_threshold_event { NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, }; + +/** + * enum nl80211_tx_power_setting - TX power adjustment + * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power + * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter + * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter + */ +enum nl80211_tx_power_setting { + NL80211_TX_POWER_AUTOMATIC, + NL80211_TX_POWER_LIMITED, + NL80211_TX_POWER_FIXED, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/contrib/package/iwinfo/src/iwinfo_madwifi.c b/contrib/package/iwinfo/src/iwinfo_madwifi.c index cb21ac5a0..3572f0011 100644 --- a/contrib/package/iwinfo/src/iwinfo_madwifi.c +++ b/contrib/package/iwinfo/src/iwinfo_madwifi.c @@ -539,7 +539,7 @@ int madwifi_get_quality_max(const char *ifname, int *buf) int madwifi_get_encryption(const char *ifname, char *buf) { - int ciphers = 0, key_type = 0, key_len = 0; + int ciphers = 0, key_len = 0; struct iwinfo_crypto_entry *c = (struct iwinfo_crypto_entry *)buf; struct iwreq wrq; struct ieee80211req_key wk; @@ -548,16 +548,6 @@ int madwifi_get_encryption(const char *ifname, char *buf) memset(&wk, 0, sizeof(wk)); memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN); - /* Get key information */ - if( get80211priv(ifname, IEEE80211_IOCTL_GETKEY, &wk, sizeof(wk)) >= 0 ) - { - key_type = wk.ik_type; - - /* Type 0 == WEP */ - if( key_type == 0 ) - c->auth_algs = (IWINFO_AUTH_OPEN | IWINFO_AUTH_SHARED); - } - /* Get wpa protocol version */ wrq.u.mode = IEEE80211_PARAM_WPA; if( madwifi_wrq(&wrq, ifname, IEEE80211_IOCTL_GETPARAM, NULL, 0) >= 0 ) @@ -576,12 +566,28 @@ int madwifi_get_encryption(const char *ifname, char *buf) c->auth_suites |= IWINFO_KMGMT_PSK; break; + case IEEE80211_AUTH_OPEN: + c->auth_algs |= IWINFO_AUTH_OPEN; + break; + + case IEEE80211_AUTH_SHARED: + c->auth_algs |= IWINFO_AUTH_SHARED; + break; + default: c->auth_suites |= IWINFO_KMGMT_NONE; break; } } + /* Get key information */ + if( get80211priv(ifname, IEEE80211_IOCTL_GETKEY, &wk, sizeof(wk)) >= 0 ) + { + /* Type 0 == WEP */ + if( (wk.ik_type == 0) && (c->auth_algs == 0) ) + c->auth_algs = (IWINFO_AUTH_OPEN | IWINFO_AUTH_SHARED); + } + /* Get group key length */ wrq.u.mode = IEEE80211_PARAM_MCASTKEYLEN; if( madwifi_wrq(&wrq, ifname, IEEE80211_IOCTL_GETPARAM, NULL, 0) >= 0 ) diff --git a/contrib/package/iwinfo/src/iwinfo_nl80211.c b/contrib/package/iwinfo/src/iwinfo_nl80211.c index c039221a5..52b90122f 100644 --- a/contrib/package/iwinfo/src/iwinfo_nl80211.c +++ b/contrib/package/iwinfo/src/iwinfo_nl80211.c @@ -754,10 +754,11 @@ int nl80211_get_signal(const char *ifname, int *buf) return -1; } -int nl80211_get_noise(const char *ifname, int *buf) +static int nl80211_get_noise_cb(struct nl_msg *msg, void *arg) { - int rv = -1; - struct nl80211_msg_conveyor *req, *res; + int8_t *noise = arg; + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *tb[NL80211_ATTR_MAX + 1]; struct nlattr *si[NL80211_SURVEY_INFO_MAX + 1]; static struct nla_policy sp[NL80211_SURVEY_INFO_MAX + 1] = { @@ -765,28 +766,48 @@ int nl80211_get_noise(const char *ifname, int *buf) [NL80211_SURVEY_INFO_NOISE] = { .type = NLA_U8 }, }; + nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL); + + if (!tb[NL80211_ATTR_SURVEY_INFO]) + return NL_SKIP; + + if (nla_parse_nested(si, NL80211_SURVEY_INFO_MAX, + tb[NL80211_ATTR_SURVEY_INFO], sp)) + return NL_SKIP; + + if (!si[NL80211_SURVEY_INFO_NOISE]) + return NL_SKIP; + + if (!*noise || si[NL80211_SURVEY_INFO_IN_USE]) + *noise = (int8_t)nla_get_u8(si[NL80211_SURVEY_INFO_NOISE]); + + return NL_SKIP; +} + + +int nl80211_get_noise(const char *ifname, int *buf) +{ + int8_t noise; + struct nl80211_msg_conveyor *req; + req = nl80211_msg(ifname, NL80211_CMD_GET_SURVEY, NLM_F_DUMP); - if( req ) + if (req) { - res = nl80211_send(req); - if( res ) + noise = 0; + + nl80211_cb(req, nl80211_get_noise_cb, &noise); + nl80211_send(req); + nl80211_free(req); + + if (noise) { - if( res->attr[NL80211_ATTR_SURVEY_INFO] ) - { - if( !nla_parse_nested(si, NL80211_SURVEY_INFO_MAX, - res->attr[NL80211_ATTR_SURVEY_INFO], sp) && - si[NL80211_SURVEY_INFO_NOISE] ) - { - *buf = (int8_t)nla_get_u8(si[NL80211_SURVEY_INFO_NOISE]); - rv = 0; - } - } - nl80211_free(res); + *buf = noise; + return 0; } - nl80211_free(req); } - return rv; + return -1; } int nl80211_get_quality(const char *ifname, int *buf) @@ -844,10 +865,34 @@ int nl80211_get_encryption(const char *ifname, char *buf) /* Hostapd */ if( (res = nl80211_hostapd_info(ifname)) ) { - if( (val = nl80211_getval(ifname, res, "auth_algs")) && (val > 0) ) - { + if( (val = nl80211_getval(ifname, res, "wpa")) != NULL ) + c->wpa_version = atoi(val); + + val = nl80211_getval(ifname, res, "wpa_key_mgmt"); + + if( !val || strstr(val, "PSK") ) + c->auth_suites |= IWINFO_KMGMT_PSK; + + if( val && strstr(val, "EAP") ) + c->auth_suites |= IWINFO_KMGMT_8021x; + + if( val && strstr(val, "NONE") ) c->auth_suites |= IWINFO_KMGMT_NONE; + if( (val = nl80211_getval(ifname, res, "wpa_pairwise")) != NULL ) + { + if( strstr(val, "TKIP") ) + c->pair_ciphers |= IWINFO_CIPHER_TKIP; + + if( strstr(val, "CCMP") ) + c->pair_ciphers |= IWINFO_CIPHER_CCMP; + + if( strstr(val, "NONE") ) + c->pair_ciphers |= IWINFO_CIPHER_NONE; + } + + if( (val = nl80211_getval(ifname, res, "auth_algs")) != NULL ) + { switch(atoi(val)) { case 1: c->auth_algs |= IWINFO_AUTH_OPEN; @@ -879,42 +924,8 @@ int nl80211_get_encryption(const char *ifname, char *buf) c->pair_ciphers |= IWINFO_CIPHER_WEP104; } } - - c->group_ciphers = c->pair_ciphers; - - return 0; } - - if( (val = nl80211_getval(ifname, res, "wpa")) != NULL ) - c->wpa_version = atoi(val); - - - val = nl80211_getval(ifname, res, "wpa_key_mgmt"); - - if( !val || strstr(val, "PSK") ) - c->auth_suites |= IWINFO_KMGMT_PSK; - - if( val && strstr(val, "EAP") ) - c->auth_suites |= IWINFO_KMGMT_8021x; - - if( val && strstr(val, "NONE") ) - c->auth_suites |= IWINFO_KMGMT_NONE; - - - if( (val = nl80211_getval(ifname, res, "wpa_pairwise")) != NULL ) - { - if( strstr(val, "TKIP") ) - c->pair_ciphers |= IWINFO_CIPHER_TKIP; - - if( strstr(val, "CCMP") ) - c->pair_ciphers |= IWINFO_CIPHER_CCMP; - - if( strstr(val, "NONE") ) - c->pair_ciphers |= IWINFO_CIPHER_NONE; - } - - c->group_ciphers = c->pair_ciphers; c->enabled = (c->auth_algs || c->auth_suites) ? 1 : 0; -- 2.25.1