From e073d4e14ff76f545a71dc40fa324618ce80adcb Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Mon, 8 Jul 2019 13:18:56 -0600 Subject: [PATCH] binman: Add support for fixed-offset files in CBFS A feature of CBFS is that it allows files to be positioned at particular offset (as with binman in general). This is useful to support execute-in-place (XIP) code, since this may not be relocatable. Add a new cbfs-offset property to control this. Signed-off-by: Simon Glass --- tools/binman/README.entries | 38 ++++++++ tools/binman/cbfs_util.py | 125 +++++++++++++++++++++----- tools/binman/cbfs_util_test.py | 82 +++++++++++++++-- tools/binman/etype/cbfs.py | 16 +++- tools/binman/ftest.py | 23 +++++ tools/binman/test/114_cbfs_offset.dts | 26 ++++++ 6 files changed, 276 insertions(+), 34 deletions(-) create mode 100644 tools/binman/test/114_cbfs_offset.dts diff --git a/tools/binman/README.entries b/tools/binman/README.entries index 2e6aea1e84..3241befc7f 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -100,6 +100,7 @@ with the second subnode below: filename = "u-boot.dtb"; cbfs-type = "raw"; cbfs-compress = "lz4"; + cbfs-offset = <0x100000>; }; }; @@ -158,6 +159,15 @@ cbfs-type: to add a flat binary with a load/start address, similar to the 'add-flat-binary' option in cbfstool. +cbfs-offset: + This is the offset of the file's data within the CBFS. It is used to + specify where the file should be placed in cases where a fixed position + is needed. Typical uses are for code which is not relocatable and must + execute in-place from a particular address. This works because SPI flash + is generally mapped into memory on x86 devices. The file header is + placed before this offset so that the data start lines up exactly with + the chosen offset. If this property is not provided, then the file is + placed in the next available spot. The current implementation supports only a subset of CBFS features. It does not support other file types (e.g. payload), adding multiple files (like the @@ -334,6 +344,34 @@ See README.x86 for information about x86 binary blobs. +Entry: intel-ifwi: Entry containing an Intel Integrated Firmware Image (IFWI) file +---------------------------------------------------------------------------------- + +Properties / Entry arguments: + - filename: Filename of file to read into entry. This is either the + IFWI file itself, or a file that can be converted into one using a + tool + - convert-fit: If present this indicates that the ifwitool should be + used to convert the provided file into a IFWI. + +This file contains code and data used by the SoC that is required to make +it work. It includes U-Boot TPL, microcode, things related to the CSE +(Converged Security Engine, the microcontroller that loads all the firmware) +and other items beyond the wit of man. + +A typical filename is 'ifwi.bin' for an IFWI file, or 'fitimage.bin' for a +file that will be converted to an IFWI. + +The position of this entry is generally set by the intel-descriptor entry. + +The contents of the IFWI are specified by the subnodes of the IFWI node. +Each subnode describes an entry which is placed into the IFWFI with a given +sub-partition (and optional entry name). + +See README.x86 for information about x86 binary blobs. + + + Entry: intel-me: Entry containing an Intel Management Engine (ME) file ---------------------------------------------------------------------- diff --git a/tools/binman/cbfs_util.py b/tools/binman/cbfs_util.py index ec4a2e5a8c..1cdbcb2339 100644 --- a/tools/binman/cbfs_util.py +++ b/tools/binman/cbfs_util.py @@ -12,7 +12,7 @@ it is necessary to rely on the C structures and source code (mostly cbfstool) to fully understand it. Currently supported: raw and stage types with compression, padding empty areas - with empty files + with empty files, fixed-offset files """ from __future__ import print_function @@ -190,6 +190,8 @@ class CbfsFile(object): Properties: name: Name of file offset: Offset of file data from start of file header + cbfs_offset: Offset of file data in bytes from start of CBFS, or None to + place this file anyway data: Contents of file, uncompressed data_len: Length of (possibly compressed) data in bytes ftype: File type (TYPE_...) @@ -203,9 +205,10 @@ class CbfsFile(object): contents (used for empty files) size: Size of the file in bytes (used for empty files) """ - def __init__(self, name, ftype, data, compress=COMPRESS_NONE): + def __init__(self, name, ftype, data, cbfs_offset, compress=COMPRESS_NONE): self.name = name self.offset = None + self.cbfs_offset = cbfs_offset self.data = data self.ftype = ftype self.compress = compress @@ -231,7 +234,7 @@ class CbfsFile(object): self.data_len = len(indata) @classmethod - def stage(cls, base_address, name, data): + def stage(cls, base_address, name, data, cbfs_offset): """Create a new stage file Args: @@ -239,28 +242,32 @@ class CbfsFile(object): name: String file name to put in CBFS (does not need to correspond to the name that the file originally came from) data: Contents of file + cbfs_offset: Offset of file data in bytes from start of CBFS, or + None to place this file anyway Returns: CbfsFile object containing the file information """ - cfile = CbfsFile(name, TYPE_STAGE, data) + cfile = CbfsFile(name, TYPE_STAGE, data, cbfs_offset) cfile.base_address = base_address return cfile @classmethod - def raw(cls, name, data, compress): + def raw(cls, name, data, cbfs_offset, compress): """Create a new raw file Args: name: String file name to put in CBFS (does not need to correspond to the name that the file originally came from) data: Contents of file + cbfs_offset: Offset of file data in bytes from start of CBFS, or + None to place this file anyway compress: Compression algorithm to use (COMPRESS_...) Returns: CbfsFile object containing the file information """ - return CbfsFile(name, TYPE_RAW, data, compress) + return CbfsFile(name, TYPE_RAW, data, cbfs_offset, compress) @classmethod def empty(cls, space_to_use, erase_byte): @@ -275,12 +282,44 @@ class CbfsFile(object): Returns: CbfsFile object containing the file information """ - cfile = CbfsFile('', TYPE_EMPTY, b'') + cfile = CbfsFile('', TYPE_EMPTY, b'', None) cfile.size = space_to_use - FILE_HEADER_LEN - FILENAME_ALIGN cfile.erase_byte = erase_byte return cfile - def get_data(self): + def calc_start_offset(self): + """Check if this file needs to start at a particular offset in CBFS + + Returns: + None if the file can be placed anywhere, or + the largest offset where the file could start (integer) + """ + if self.cbfs_offset is None: + return None + return self.cbfs_offset - self.get_header_len() + + def get_header_len(self): + """Get the length of headers required for a file + + This is the minimum length required before the actual data for this file + could start. It might start later if there is padding. + + Returns: + Total length of all non-data fields, in bytes + """ + name = _pack_string(self.name) + hdr_len = len(name) + FILE_HEADER_LEN + if self.ftype == TYPE_STAGE: + pass + elif self.ftype == TYPE_RAW: + hdr_len += ATTR_COMPRESSION_LEN + elif self.ftype == TYPE_EMPTY: + pass + else: + raise ValueError('Unknown file type %#x\n' % self.ftype) + return hdr_len + + def get_data(self, offset=None, pad_byte=None): """Obtain the contents of the file, in CBFS format Returns: @@ -292,6 +331,7 @@ class CbfsFile(object): attr_pos = 0 content = b'' attr = b'' + pad = b'' data = self.data if self.ftype == TYPE_STAGE: elf_data = elf.DecodeElf(data, self.base_address) @@ -315,10 +355,33 @@ class CbfsFile(object): if attr: attr_pos = hdr_len hdr_len += len(attr) - hdr = struct.pack(FILE_HEADER_FORMAT, FILE_MAGIC, - len(content) + len(data), + if self.cbfs_offset is not None: + pad_len = self.cbfs_offset - offset - hdr_len + if pad_len < 0: # pragma: no cover + # Test coverage of this is not available since this should never + # happen. It indicates that get_header_len() provided an + # incorrect value (too small) so that we decided that we could + # put this file at the requested place, but in fact a previous + # file extends far enough into the CBFS that this is not + # possible. + raise ValueError("Internal error: CBFS file '%s': Requested offset %#x but current output position is %#x" % + (self.name, self.cbfs_offset, offset)) + pad = tools.GetBytes(pad_byte, pad_len) + hdr_len += pad_len + self.offset = len(content) + len(data) + hdr = struct.pack(FILE_HEADER_FORMAT, FILE_MAGIC, self.offset, self.ftype, attr_pos, hdr_len) - return hdr + name + attr + content + data + + # Do a sanity check of the get_header_len() function, to ensure that it + # stays in lockstep with this function + expected_len = self.get_header_len() + actual_len = len(hdr + name + attr) + if expected_len != actual_len: # pragma: no cover + # Test coverage of this is not available since this should never + # happen. It probably indicates that get_header_len() is broken. + raise ValueError("Internal error: CBFS file '%s': Expected headers of %#x bytes, got %#d" % + (self.name, expected_len, actual_len)) + return hdr + name + attr + pad + content + data class CbfsWriter(object): @@ -431,34 +494,39 @@ class CbfsWriter(object): if offset < self._size: self._skip_to(fd, offset) - def add_file_stage(self, name, data): + def add_file_stage(self, name, data, cbfs_offset=None): """Add a new stage file to the CBFS Args: name: String file name to put in CBFS (does not need to correspond to the name that the file originally came from) data: Contents of file + cbfs_offset: Offset of this file's data within the CBFS, in bytes, + or None to place this file anywhere Returns: CbfsFile object created """ - cfile = CbfsFile.stage(self._base_address, name, data) + cfile = CbfsFile.stage(self._base_address, name, data, cbfs_offset) self._files[name] = cfile return cfile - def add_file_raw(self, name, data, compress=COMPRESS_NONE): + def add_file_raw(self, name, data, cbfs_offset=None, + compress=COMPRESS_NONE): """Create a new raw file Args: name: String file name to put in CBFS (does not need to correspond to the name that the file originally came from) data: Contents of file + cbfs_offset: Offset of this file's data within the CBFS, in bytes, + or None to place this file anywhere compress: Compression algorithm to use (COMPRESS_...) Returns: CbfsFile object created """ - cfile = CbfsFile.raw(name, data, compress) + cfile = CbfsFile.raw(name, data, cbfs_offset, compress) self._files[name] = cfile return cfile @@ -507,7 +575,11 @@ class CbfsWriter(object): # Write out each file for cbf in self._files.values(): - fd.write(cbf.get_data()) + # Place the file at its requested place, if any + offset = cbf.calc_start_offset() + if offset is not None: + self._pad_to(fd, align_int_down(offset, self._align)) + fd.write(cbf.get_data(fd.tell(), self._erase_byte)) self._align_to(fd, self._align) if not self._hdr_at_start: self._write_header(fd, add_fileheader=self._add_fileheader) @@ -639,25 +711,27 @@ class CbfsReader(object): # Create the correct CbfsFile object depending on the type cfile = None - fd.seek(file_pos + offset, io.SEEK_SET) + cbfs_offset = file_pos + offset + fd.seek(cbfs_offset, io.SEEK_SET) if ftype == TYPE_CBFSHEADER: self._read_header(fd) elif ftype == TYPE_STAGE: data = fd.read(STAGE_LEN) - cfile = CbfsFile.stage(self.stage_base_address, name, b'') + cfile = CbfsFile.stage(self.stage_base_address, name, b'', + cbfs_offset) (cfile.compress, cfile.entry, cfile.load, cfile.data_len, cfile.memlen) = struct.unpack(STAGE_FORMAT, data) cfile.data = fd.read(cfile.data_len) elif ftype == TYPE_RAW: data = fd.read(size) - cfile = CbfsFile.raw(name, data, compress) + cfile = CbfsFile.raw(name, data, cbfs_offset, compress) cfile.decompress() if DEBUG: print('data', data) elif ftype == TYPE_EMPTY: # Just read the data and discard it, since it is only padding fd.read(size) - cfile = CbfsFile('', TYPE_EMPTY, b'') + cfile = CbfsFile('', TYPE_EMPTY, b'', cbfs_offset) else: raise ValueError('Unknown type %#x when reading\n' % ftype) if cfile: @@ -674,7 +748,8 @@ class CbfsReader(object): """Read attributes from the file CBFS files can have attributes which are things that cannot fit into the - header. The only attribute currently supported is compression. + header. The only attributes currently supported are compression and the + unused tag. Args: fd: File to read from @@ -703,6 +778,8 @@ class CbfsReader(object): # We don't currently use this information atag, alen, compress, _decomp_size = struct.unpack( ATTR_COMPRESSION_FORMAT, data) + elif atag == FILE_ATTR_TAG_UNUSED2: + break else: print('Unknown attribute tag %x' % atag) attr_size -= len(data) @@ -760,7 +837,7 @@ class CbfsReader(object): return val.decode('utf-8') -def cbfstool(fname, *cbfs_args): +def cbfstool(fname, *cbfs_args, **kwargs): """Run cbfstool with provided arguments If the tool fails then this function raises an exception and prints out the @@ -773,7 +850,9 @@ def cbfstool(fname, *cbfs_args): Returns: CommandResult object containing the results """ - args = ('cbfstool', fname) + cbfs_args + args = ['cbfstool', fname] + list(cbfs_args) + if kwargs.get('base') is not None: + args += ['-b', '%#x' % kwargs['base']] result = command.RunPipe([args], capture=not VERBOSE, capture_stderr=not VERBOSE, raise_on_error=False) if result.return_code: diff --git a/tools/binman/cbfs_util_test.py b/tools/binman/cbfs_util_test.py index 9bb6a29822..0fe4aa494e 100755 --- a/tools/binman/cbfs_util_test.py +++ b/tools/binman/cbfs_util_test.py @@ -105,7 +105,7 @@ class TestCbfs(unittest.TestCase): return cbfs def _check_uboot(self, cbfs, ftype=cbfs_util.TYPE_RAW, offset=0x38, - data=U_BOOT_DATA): + data=U_BOOT_DATA, cbfs_offset=None): """Check that the U-Boot file is as expected Args: @@ -113,6 +113,7 @@ class TestCbfs(unittest.TestCase): ftype: Expected file type offset: Expected offset of file data: Expected data in file + cbfs_offset: Expected CBFS offset for file's data Returns: CbfsFile object containing the file @@ -121,24 +122,30 @@ class TestCbfs(unittest.TestCase): cfile = cbfs.files['u-boot'] self.assertEqual('u-boot', cfile.name) self.assertEqual(offset, cfile.offset) + if cbfs_offset is not None: + self.assertEqual(cbfs_offset, cfile.cbfs_offset) self.assertEqual(data, cfile.data) self.assertEqual(ftype, cfile.ftype) self.assertEqual(cbfs_util.COMPRESS_NONE, cfile.compress) self.assertEqual(len(data), cfile.memlen) return cfile - def _check_dtb(self, cbfs, offset=0x38, data=U_BOOT_DTB_DATA): + def _check_dtb(self, cbfs, offset=0x38, data=U_BOOT_DTB_DATA, + cbfs_offset=None): """Check that the U-Boot dtb file is as expected Args: cbfs: CbfsReader object to check offset: Expected offset of file data: Expected data in file + cbfs_offset: Expected CBFS offset for file's data """ self.assertIn('u-boot-dtb', cbfs.files) cfile = cbfs.files['u-boot-dtb'] self.assertEqual('u-boot-dtb', cfile.name) self.assertEqual(offset, cfile.offset) + if cbfs_offset is not None: + self.assertEqual(cbfs_offset, cfile.cbfs_offset) self.assertEqual(U_BOOT_DTB_DATA, cfile.data) self.assertEqual(cbfs_util.TYPE_RAW, cfile.ftype) self.assertEqual(cbfs_util.COMPRESS_NONE, cfile.compress) @@ -157,13 +164,14 @@ class TestCbfs(unittest.TestCase): self._check_uboot(cbfs) self._check_dtb(cbfs) - def _get_expected_cbfs(self, size, arch='x86', compress=None): + def _get_expected_cbfs(self, size, arch='x86', compress=None, base=None): """Get the file created by cbfstool for a particular scenario Args: size: Size of the CBFS in bytes arch: Architecture of the CBFS, as a string compress: Compression to use, e.g. cbfs_util.COMPRESS_LZMA + base: Base address of file, or None to put it anywhere Returns: Resulting CBFS file, or None if cbfstool is not available @@ -172,14 +180,18 @@ class TestCbfs(unittest.TestCase): return None cbfs_fname = os.path.join(self._indir, 'test.cbfs') cbfs_util.cbfstool(cbfs_fname, 'create', '-m', arch, '-s', '%#x' % size) + if base: + base = [(1 << 32) - size + b for b in base] cbfs_util.cbfstool(cbfs_fname, 'add', '-n', 'u-boot', '-t', 'raw', '-c', compress and compress[0] or 'none', '-f', tools.GetInputFilename( - compress and 'compress' or 'u-boot.bin')) + compress and 'compress' or 'u-boot.bin'), + base=base[0] if base else None) cbfs_util.cbfstool(cbfs_fname, 'add', '-n', 'u-boot-dtb', '-t', 'raw', '-c', compress and compress[1] or 'none', '-f', tools.GetInputFilename( - compress and 'compress' or 'u-boot.dtb')) + compress and 'compress' or 'u-boot.dtb'), + base=base[1] if base else None) return cbfs_fname def _compare_expected_cbfs(self, data, cbfstool_fname): @@ -407,7 +419,7 @@ class TestCbfs(unittest.TestCase): self.skipTest('lz4 --no-frame-crc not available') size = 0x140 cbw = CbfsWriter(size) - cbw.add_file_raw('u-boot', COMPRESS_DATA, + cbw.add_file_raw('u-boot', COMPRESS_DATA, None, compress=cbfs_util.COMPRESS_LZ4) data = cbw.get_data() @@ -431,7 +443,7 @@ class TestCbfs(unittest.TestCase): self.skipTest('lz4 --no-frame-crc not available') size = 0x140 cbw = CbfsWriter(size) - cbw.add_file_raw('u-boot', COMPRESS_DATA, + cbw.add_file_raw('u-boot', COMPRESS_DATA, None, compress=cbfs_util.COMPRESS_LZ4) data = cbw.get_data() @@ -517,9 +529,9 @@ class TestCbfs(unittest.TestCase): self.skipTest('lz4 --no-frame-crc not available') size = 0x140 cbw = CbfsWriter(size) - cbw.add_file_raw('u-boot', COMPRESS_DATA, + cbw.add_file_raw('u-boot', COMPRESS_DATA, None, compress=cbfs_util.COMPRESS_LZ4) - cbw.add_file_raw('u-boot-dtb', COMPRESS_DATA, + cbw.add_file_raw('u-boot-dtb', COMPRESS_DATA, None, compress=cbfs_util.COMPRESS_LZMA) data = cbw.get_data() @@ -556,6 +568,58 @@ class TestCbfs(unittest.TestCase): cbfs_fname = self._get_expected_cbfs(size=size) self._compare_expected_cbfs(data, cbfs_fname) + def test_cbfs_offset(self): + """Test a CBFS with files at particular offsets""" + size = 0x200 + cbw = CbfsWriter(size) + cbw.add_file_raw('u-boot', U_BOOT_DATA, 0x40) + cbw.add_file_raw('u-boot-dtb', U_BOOT_DTB_DATA, 0x140) + + data = cbw.get_data() + cbfs = self._check_hdr(data, size) + self._check_uboot(cbfs, ftype=cbfs_util.TYPE_RAW, offset=0x40, + cbfs_offset=0x40) + self._check_dtb(cbfs, offset=0x40, cbfs_offset=0x140) + + cbfs_fname = self._get_expected_cbfs(size=size, base=(0x40, 0x140)) + self._compare_expected_cbfs(data, cbfs_fname) + + def test_cbfs_invalid_file_type_header(self): + """Check handling of an invalid file type when outputting a header""" + size = 0xb0 + cbw = CbfsWriter(size) + cfile = cbw.add_file_raw('u-boot', U_BOOT_DATA, 0) + + # Change the type manually before generating the CBFS, and make sure + # that the generator complains + cfile.ftype = 0xff + with self.assertRaises(ValueError) as e: + cbw.get_data() + self.assertIn('Unknown file type 0xff', str(e.exception)) + + def test_cbfs_offset_conflict(self): + """Test a CBFS with files that want to overlap""" + size = 0x200 + cbw = CbfsWriter(size) + cbw.add_file_raw('u-boot', U_BOOT_DATA, 0x40) + cbw.add_file_raw('u-boot-dtb', U_BOOT_DTB_DATA, 0x80) + + with self.assertRaises(ValueError) as e: + cbw.get_data() + self.assertIn('No space for data before pad offset', str(e.exception)) + + def test_cbfs_check_offset(self): + """Test that we can discover the offset of a file after writing it""" + size = 0xb0 + cbw = CbfsWriter(size) + cbw.add_file_raw('u-boot', U_BOOT_DATA) + cbw.add_file_raw('u-boot-dtb', U_BOOT_DTB_DATA) + data = cbw.get_data() + + cbfs = cbfs_util.CbfsReader(data) + self.assertEqual(0x38, cbfs.files['u-boot'].cbfs_offset) + self.assertEqual(0x78, cbfs.files['u-boot-dtb'].cbfs_offset) + if __name__ == '__main__': unittest.main() diff --git a/tools/binman/etype/cbfs.py b/tools/binman/etype/cbfs.py index 513df217bc..49baa6a4f6 100644 --- a/tools/binman/etype/cbfs.py +++ b/tools/binman/etype/cbfs.py @@ -52,6 +52,7 @@ class Entry_cbfs(Entry): filename = "u-boot.dtb"; cbfs-type = "raw"; cbfs-compress = "lz4"; + cbfs-offset = <0x100000>; }; }; @@ -110,6 +111,15 @@ class Entry_cbfs(Entry): to add a flat binary with a load/start address, similar to the 'add-flat-binary' option in cbfstool. + cbfs-offset: + This is the offset of the file's data within the CBFS. It is used to + specify where the file should be placed in cases where a fixed position + is needed. Typical uses are for code which is not relocatable and must + execute in-place from a particular address. This works because SPI flash + is generally mapped into memory on x86 devices. The file header is + placed before this offset so that the data start lines up exactly with + the chosen offset. If this property is not provided, then the file is + placed in the next available spot. The current implementation supports only a subset of CBFS features. It does not support other file types (e.g. payload), adding multiple files (like the @@ -172,9 +182,10 @@ class Entry_cbfs(Entry): return False data = entry.GetData() if entry._type == 'raw': - cbfs.add_file_raw(entry._cbfs_name, data, entry._cbfs_compress) + cbfs.add_file_raw(entry._cbfs_name, data, entry._cbfs_offset, + entry._cbfs_compress) elif entry._type == 'stage': - cbfs.add_file_stage(entry._cbfs_name, data) + cbfs.add_file_stage(entry._cbfs_name, data, entry._cbfs_offset) data = cbfs.get_data() self.SetContents(data) return True @@ -186,6 +197,7 @@ class Entry_cbfs(Entry): entry._cbfs_name = fdt_util.GetString(node, 'cbfs-name', entry.name) entry._type = fdt_util.GetString(node, 'cbfs-type') compress = fdt_util.GetString(node, 'cbfs-compress', 'none') + entry._cbfs_offset = fdt_util.GetInt(node, 'cbfs-offset') entry._cbfs_compress = cbfs_util.find_compress(compress) if entry._cbfs_compress is None: self.Raise("Invalid compression in '%s': '%s'" % diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index 1355c4f55d..5bde8aa30a 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -2012,5 +2012,28 @@ class TestFunctional(unittest.TestCase): self.assertIn('Could not complete processing of contents', str(e.exception)) + def testCbfsOffset(self): + """Test a CBFS with files at particular offsets + + Like all CFBS tests, this is just checking the logic that calls + cbfs_util. See cbfs_util_test for fully tests (e.g. test_cbfs_offset()). + """ + data = self._DoReadFile('114_cbfs_offset.dts') + size = 0x200 + + cbfs = cbfs_util.CbfsReader(data) + self.assertEqual(size, cbfs.rom_size) + + self.assertIn('u-boot', cbfs.files) + cfile = cbfs.files['u-boot'] + self.assertEqual(U_BOOT_DATA, cfile.data) + self.assertEqual(0x40, cfile.cbfs_offset) + + self.assertIn('u-boot-dtb', cbfs.files) + cfile2 = cbfs.files['u-boot-dtb'] + self.assertEqual(U_BOOT_DTB_DATA, cfile2.data) + self.assertEqual(0x140, cfile2.cbfs_offset) + + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/test/114_cbfs_offset.dts b/tools/binman/test/114_cbfs_offset.dts new file mode 100644 index 0000000000..7aa9d9d4bf --- /dev/null +++ b/tools/binman/test/114_cbfs_offset.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + sort-by-offset; + end-at-4gb; + size = <0x200>; + cbfs { + size = <0x200>; + offset = <0xfffffe00>; + u-boot { + cbfs-offset = <0x40>; + cbfs-type = "raw"; + }; + u-boot-dtb { + cbfs-offset = <0x140>; + cbfs-type = "raw"; + }; + }; + }; +}; -- 2.25.1