From dc4f6b896f009c24170e75af745fc636ef8166a8 Mon Sep 17 00:00:00 2001 From: Steve Glennon Date: Wed, 27 Feb 2019 15:48:23 -0700 Subject: [PATCH] ipq40xx: add support for EnGenius ENS620EXT MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Hardware -------- CPU: Qualcomm IPQ4018 RAM: 256M FLASH: 32M SPI NOR W25Q256 ETH: QCA8075 WiFi2: IPQ4018 2T2R 2SS b/g/n WiFi5: IPQ4018 2T2R 2SS n/ac LED: - Power amber - LAN1(PoE) green - LAN2 green - Wi-Fi 2.4GHz green - Wi-Fi 5GHz green BTN: - WPS UART: 115200n8 3.3V J1 VCC(1) - GND(2) - TX(3) - RX(4) Added basic support to get the device up and running for a sysupgrade image only. There is currently no way back to factory firmware, so this is a one-way street to OpenWRT. Install from factory condition is convoluted, and may brick your device: 1) Enable SSH and disable the CLI on the factory device from the web user interface (Management->Advanced) 2) Reboot the device 3) Override the default, limited SSH shell: a) Get into the ssh shell: ssh admin@192.168.1.1 /bin/sh --login b) Change the dropbear script to disable the limited shell. At the empty command prompt type: sed -i '/login_ssh/s/^/#/g’ dropbear /etc/init.d/dropbear restart exit 4) ssh in to a (now-) normal OpenWRT SSH session 5) Flash your built image a) scp openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin admin@192.168.1.1:/tmp/ b) ssh admin@192.168.1.1 c) sysupgrade -n /tmp/openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin 6) After flash completes (it may say "Upgrade failed" followed by "Upgrade completed") and device reboots, log in to newly flashed system. Note you will now need to ssh as root rather than admin. Signed-off-by: Steve Glennon [whitespace fixes, reordered partitions, removed rng node from 4.14, fixed 901-arm-boot-add-dts-files.patch] Signed-off-by: Christian Lamparter --- package/firmware/ipq-wifi/Makefile | 3 +- .../ipq-wifi/board-engenius_ens620ext.bin | Bin 0 -> 24324 bytes .../ipq40xx/base-files/etc/board.d/01_leds | 6 + .../ipq40xx/base-files/etc/board.d/02_network | 7 +- .../etc/hotplug.d/firmware/11-ath10k-caldata | 8 + .../arm/boot/dts/qcom-ipq4018-ens620ext.dts | 252 +++++++++++++++++ .../arm/boot/dts/qcom-ipq4018-ens620ext.dts | 256 ++++++++++++++++++ target/linux/ipq40xx/image/Makefile | 16 ++ .../901-arm-boot-add-dts-files.patch | 3 +- .../901-arm-boot-add-dts-files.patch | 3 +- 10 files changed, 550 insertions(+), 4 deletions(-) create mode 100644 package/firmware/ipq-wifi/board-engenius_ens620ext.bin create mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts create mode 100644 target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index d273667f68..705617e70b 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -18,7 +18,7 @@ endef # Please send a mail with your device-specific board files upstream. # You can find instructions and examples on the linux-wireless wiki: # -ALLWIFIBOARDS:=alfa-network_ap120c-ac asus_map-ac2200 avm_fritzbox-7530 avm_fritzrepeater-3000 engenius_eap1300 linksys_ea6350v3 qxwlan_e2600ac +ALLWIFIBOARDS:=alfa-network_ap120c-ac asus_map-ac2200 avm_fritzbox-7530 avm_fritzrepeater-3000 engenius_eap1300 engenius_ens620ext linksys_ea6350v3 qxwlan_e2600ac ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD)) define Package/ipq-wifi-default @@ -56,6 +56,7 @@ endef $(eval $(call generate-ipq-wifi-package,alfa-network_ap120c-ac,board-alfa-network_ap120c-ac.bin,ALFA Network AP120C-AC)) $(eval $(call generate-ipq-wifi-package,asus_map-ac2200,board-map-ac2200.bin,ASUS MAP-AC2200)) $(eval $(call generate-ipq-wifi-package,engenius_eap1300,board-engenius_eap1300.bin,EnGenius EAP1300)) +$(eval $(call generate-ipq-wifi-package,engenius_ens620ext,board-engenius_ens620ext.bin,EnGenius ENS620EXT)) $(eval $(call generate-ipq-wifi-package,avm_fritzbox-7530,board-avm_fritzbox-7530.bin,AVM FRITZ!Box 7530)) $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-3000,board-avm_fritzrepeater-3000.bin,AVM FRITZ!Repeater 3000)) $(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,board-linksys_ea6350v3.bin,Linksys EA6350v3)) diff --git a/package/firmware/ipq-wifi/board-engenius_ens620ext.bin b/package/firmware/ipq-wifi/board-engenius_ens620ext.bin new file mode 100644 index 0000000000000000000000000000000000000000..54fd1d0a3d3bf70049ece2a2b49861ecdc6985fb GIT binary patch literal 24324 zcmeHPdr(tX8b3fZ>RRQ75E1YaLU_bNfIu}!gzz*#3KkU!un1I;+#2LzKnz{5=Z>tWP~MVC1fW9nM?+tREFa@0795b1&oV4u^#g1wd3()DO>|xd`aX!B2lV z6;C8Lx@9{Xw0CFrX*bLSUO<_7%zAq*IKoT-3CR?=7Q>6^i~C5_jb;4YJvI&kYpbT` zWdg&?>@aN5X{MTZI+aRYwrrW3i2!iNj+J`C;Yh+Uz(SZ#vi|`>a3UL?MzD?A5xuYsg}NzwrPAA)@r2LX>a`m<-u2+U@-ov zs-?apFAW~ls@m(NdE3+C#s~3kP{)S`tu1wV;RC^Wm4CnX6oM6^?6c4l%%VSD{c5Fzy-CogwL;@ zd|KNZ-so59QM9m7BE2OLSVmp>t2fpn9-iyg`)nZI@J&kmJ@#b+$AK3_c;@Qr>VoHP zZt!Dy`IJyEH|0inJ$!#V4`s6h;9nri-#>um&tm0JR)DE16v7v>bUXsNx!IX4mLHtx z#~+`4KRJnC0r5G30S4WFzyHH`raHXihSgM83gv&W-&%OWjP}o;KYe28>u9elN8t4c zoTRd`Z3IvFd|Xor-53(Y)+?N@W(gYvMUVtE0f|H-kxKdD#-ks$b#~9L0Kt^pwyQ!z zXxLd>#XavGX zr=3t=v|OF`Ng$Z^imc8$Kej;PfqFdkKzvXiu8%kgO?sMyWS|+`3~>}1^)w2JMPs?K zV#7%=&Gl0mpm%tV@7>A|)gz`U@HNHcqs3y?(*Mg`b&KJelw5-?XP-ogM9B&Q?qtmCai{Ak;F+mI~UX5MBbp03gwYd=T%>7a4N1?9@I#{j_ckg{*= z@yyaWzw;)&ny+YtgSOSY4J!l)@c53?1VAJRg8ZBy$Od9V5)=z2ylkgM0v5~Hmo-DW zpnkTN#VY7z13{<@_~8HmT~x$H7!5$k3Iqs%fKs#^0j{2|s|sN0?ye6y&f7Z3ft(M4 z7uwZySIS-(fq>CvSIUZyp*&O}@XfVv>}zXfa8MxomrRDpogr3dh|Y<( z@60VI+FPz{@9I9+*ME6LJ9hof=MTPqZ2tk1IG%l1t_!9&(8oc=v}Pg_s*iz+6Pt-B zs6PHF<~0)$Q2Rl&YO(myT`=2VaXD&B%s4Zru&nLO`2o!}-B;G?iwhOwYUq=6#25AD z`ikiwc`_LhqhhXDoD8BTqY(ir;0nai^LBr2oYkHhgU3KnS}HFU$)s)KZ9?K`d1vw0 z>@kSXIig%Bw>b9l?l;@SyI=Ds7Z*snKh&;gfqV8rREi*fn`%G@c@^(o;xOL*Rf7k{ z+)=!H6fV*z2L3yBx!W?zGy@)hYcK4jzjT9_Xgo)UAdwU#+0##*me>z8CWmt6F#HwFMs zh>|UClYK}8NCZd(7AgWp-n=E={eS-P*FS#y?eF2@3|xGicmLv_fB*B7Cx3%FYrK1b zAUeXp+n=2L_rK@F%zY~!D?0s$d4#kvlZ>a0tH7wBK zIsP7J%DKnuuSvTP6zAe!cHenyeurUf;d8!Bz8TeZscRKElJIYC=v3+kMWKYRyQV&) zsFI}e19hXCex(AF@O|;$iru~&90H(0r&_MqCE-qJHK&yauxtrmGp6ptFi9pqRQFqT zhe9Sv+|-;?%CQ}i&6=CaGg!4Kna_g;or?X0!T7yk4w$&D zIj^jR5{3BauB$)NyX1$vboYJ;2f(HFYEG%;$|C5JT767erI2W@sCzM)D1je7 zaZ7ViS&!}Jdm9WmLHHUv)Q6R2icEO$yz&sXT@nr*=~2if8GO#fHO*ONHI^k};|8DK z<3NUz{Q%0fl*#C3SEMp1yJLpLu#EQNd&9zCb7!;(bn^#%{%8tf4#ywoRMvgHJl zD3K^xL0~a#4J%6{)k_wE?$L@%@m*ofKD8G#zg8um3T{|maqvv)QBIY2$?DX*{iP?j zDgySclUx`*cqy?nyxB)Ssx4EepMLW=(+oilpBL39a|ci?|J5baYHebr3ya6kZG>SFUGd8YH52~da{m3*Lq1- zi>?mu`H264pUksxKqKuYiRxYGWXqs z+I@Yg9qhyOvhJaZ^YJY~hv>zZdZf*9@{RjEG6pUmI2(I3pqgHIcCff7q1C^JR@gNl zJu5gKP~%Z>vTgVK(HJYACLA5AIhT1dq|U2!$!;8S;Uof!0D;$i3I}`^mQgI=p=~bW zyX&9A5g5pZfA9$$%m9CXmVXX#nx}Bg=EM`U`xWyRv!6W&LAzf$Z*y3HpHz_uSVUkJ z?f&_UZnly>=DXhvHaVOP0RA_28&71KOXn9jfcrRyQii>E+dd~WyU2ae#yI~rMQ ze0xIwOLFe +#include +#include + +/ { + model = "EnGenius ENS620EXT"; + compatible = "engenius,ens620ext"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + soc { + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + buttons { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power: power { + label = "ens620ext:amber:power"; + gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "ens620ext:green:lan1"; + gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "ens620ext:green:lan2"; + gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + }; + + wlan2G { + label = "ens620ext:green:wlan2G"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + wlan5G { + label = "ens620ext:green:wlan5G"; + gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition@e0000 { + label = "APPSBLENV"; /* uboot env*/ + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition@f0000 { + label = "APPSBL"; /* uboot */ + reg = <0x000f0000 0x00090000>; + read-only; + }; + partition@180000 { + label = "ART"; + reg = <0x00180000 0x00010000>; + read-only; + }; + partition@190000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x00190000 0x14d0000>; + }; + partition@1660000 { + label = "failsafe"; + reg = <0x01660000 0x008f0000>; + read-only; + }; + partition@1f50000 { + label = "u-boot-env"; + reg = <0x01f50000 0x00010000>; + read-only; + }; + partition@1f60000 { + label = "userconfig"; + reg = <0x01f60000 0x000a0000>; + read-only; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; +}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts new file mode 100644 index 0000000000..dd3ec229fe --- /dev/null +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "EnGenius ENS620EXT"; + compatible = "engenius,ens620ext"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + buttons { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power: power { + label = "ens620ext:amber:power"; + gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "ens620ext:green:lan1"; + gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "ens620ext:green:lan2"; + gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + }; + + wlan2G { + label = "ens620ext:green:wlan2G"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + wlan5G { + label = "ens620ext:green:wlan5G"; + gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition@e0000 { + label = "APPSBLENV"; /* uboot env*/ + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition@f0000 { + label = "APPSBL"; /* uboot */ + reg = <0x000f0000 0x00090000>; + read-only; + }; + partition@180000 { + label = "ART"; + reg = <0x00180000 0x00010000>; + read-only; + }; + partition@190000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x00190000 0x14d0000>; + }; + partition@1660000 { + label = "failsafe"; + reg = <0x01660000 0x008F0000>; + read-only; + }; + partition@1f50000 { + label = "u-boot-env"; + reg = <0x01f50000 0x00010000>; + read-only; + }; + partition@1f60000 { + label = "userconfig"; + reg = <0x01f60000 0x000a0000>; + read-only; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; +}; diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index c81d33d084..626223a7cb 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -167,6 +167,22 @@ define Device/engenius_eap1300 endef TARGET_DEVICES += engenius_eap1300 +define Device/engenius_ens620ext + $(call Device/FitImage) + DEVICE_DTS := qcom-ipq4018-ens620ext + DEVICE_DTS_CONFIG := config@4 + BLOCKSIZE := 64k + PAGESIZE := 256 + DEVICE_TITLE := EnGenius ENS620EXT + IMAGE_SIZE := 21823488 + KERNEL_SIZE := 5120k + FILESYSTEMS := squashfs + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | append-metadata + DEVICE_PACKAGES := ipq-wifi-engenius_ens620ext +endef +TARGET_DEVICES += engenius_ens620ext + define Device/glinet_gl-b1300 $(call Device/FitImage) DEVICE_TITLE := GL.iNet GL-B1300 diff --git a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch index 951479a2ef..6743f44b25 100644 --- a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -697,7 +697,28 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -697,7 +697,29 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -18,6 +18,7 @@ Signed-off-by: John Crispin + qcom-ipq4018-ap120c-ac.dtb \ + qcom-ipq4018-ea6350v3.dtb \ + qcom-ipq4018-eap1300.dtb \ ++ qcom-ipq4018-ens620ext.dtb \ + qcom-ipq4018-ex6100v2.dtb \ + qcom-ipq4018-ex6150v2.dtb \ + qcom-ipq4018-fritz4040.dtb \ diff --git a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch index 23b3b4546a..57a5760806 100644 --- a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -785,11 +785,31 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -785,11 +785,32 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -18,6 +18,7 @@ Signed-off-by: John Crispin + qcom-ipq4018-ap120c-ac.dtb \ + qcom-ipq4018-ea6350v3.dtb \ + qcom-ipq4018-eap1300.dtb \ ++ qcom-ipq4018-ens620ext.dtb \ + qcom-ipq4018-ex6100v2.dtb \ + qcom-ipq4018-ex6150v2.dtb \ + qcom-ipq4018-fritz4040.dtb \ -- 2.25.1