From db0bb572d1fd154052c2d7d4685fbee356ed60f4 Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 4 Jul 2011 21:27:16 +0000 Subject: [PATCH] km/common: rework and simplify default environment This is the second step to simplify and decrease the default environment for the keymile boards. The release usecase formaly used to set the production environment was removed and the default configuration is now the production environment. So the formar environment variable "release" which has done a lot of things in the past, simply erase the current environment and do a reset which forces u-boot to setup the default environment again. Signed-off-by: Holger Brunck Signed-off-by: Valentin Longchamp cc: Heiko Schocher cc: Wolfgang Denk --- include/configs/km/keymile-common.h | 105 ++++++---------------------- include/configs/km/km-powerpc.h | 12 ++-- include/configs/km/km_arm.h | 12 ++-- 3 files changed, 35 insertions(+), 94 deletions(-) diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 70c9dad3d1..8839ccb920 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -131,8 +131,7 @@ /* common powerpc specific env settings */ #ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS #define CONFIG_KM_DEF_ENV_BOOTPARAMS \ - "bootparams=empty\0" \ - "initial_boot_bank=0\0" + "actual_bank=0\0" #endif #ifndef CONFIG_KM_DEF_NETDEV @@ -150,58 +149,16 @@ #define xstr(s) str(s) #define str(s) #s -/* - * bootrunner - * - run all commands in 'subbootcmds' - * - on error, stop running the remaing commands - */ -#define CONFIG_KM_DEF_ENV_BOOTRUNNER \ - "bootrunner=" \ - "break=0; " \ - "for subbootcmd in ${subbootcmds}; do " \ - "if test ${break} -eq 0; then; " \ - "print ${subbootcmd}; " \ - "run ${subbootcmd} || break=1; " \ - "fi; " \ - "done\0" \ - "" - /* * boottargets - * - set 'subbootcmds' for the bootrunner + * - set 'subbootcmds' * - set 'bootcmd' and 'altbootcmd' * available targets: * - 'release': for a standalone system kernel/rootfs from flash - * - * - 'commonargs': bootargs common to all targets */ #define CONFIG_KM_DEF_ENV_BOOTTARGETS \ - "commonargs=" \ - "addip " \ - "addtty " \ - "addmem " \ - "addinit " \ - "addvar " \ - "addmtdparts " \ - "addbootcount " \ - "\0" \ - "release=" \ - "setenv actual_bank ${initial_boot_bank} && " \ - "setenv subbootcmds \"" \ - "checkboardid " \ - "ubiattach ubicopy " \ - "cramfsloadfdt cramfsloadkernel " \ - "flashargs ${commonargs} " \ - "addpanic boot " \ - "\" && " \ - "setenv bootcmd \'" \ - "run actual bootrunner; reset" \ - "\' && " \ - "setenv altbootcmd \'" \ - "run backup bootrunner; reset" \ - "\' && " \ - "saveenv && saveenv && " \ - "reset\0" \ + "subbootcmds=ubiattach ubicopy cramfsloadfdt cramfsloadkernel " \ + "flashargs add_default addpanic boot\0" \ "debug_env=" \ "tftp 200000 " CONFIG_KM_ARCH_DBG_FILE " && " \ "env import -t 200000 ${filesize} && " \ @@ -212,37 +169,26 @@ * bootargs * - modify 'bootargs' * - * - 'addip': add ip configuration - * - 'addmem': limit kernel memory mem= + * - 'add_default': default bootargs common for all arm/ppc boards * - 'addpanic': add kernel panic options - * - 'addtty': add console=... - * - 'addvar': add phram device for /var * - 'flashargs': defaults arguments for flash base boot * - * processor specific settings - * - 'addbootcount': add boot counter - * - 'addmtdparts': add mtd partition information */ #define CONFIG_KM_DEF_ENV_BOOTARGS \ - "addinit=" \ - "setenv bootargs ${bootargs} init=${init}\0" \ - "addip=" \ + "add_default=" \ "setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off\0" \ - "addmem=" \ - "setenv bootargs ${bootargs} mem=${pnvramaddr}\0" \ + ":${hostname}:${netdev}:off3" \ + " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \ + " mem=${pnvramaddr} init=${init}" \ + " phram.phram=phvar,${varaddr}," xstr(CONFIG_KM_PHRAM) \ + " ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \ + CONFIG_KM_DEF_BOOT_ARGS_CPU \ + "\0" \ "addpanic=" \ "setenv bootargs ${bootargs} panic=1 panic_on_oops=1\0" \ - "addtty=" \ - "setenv bootargs ${bootargs}" \ - " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}\0" \ - "addvar=" \ - "setenv bootargs ${bootargs} phram.phram=phvar," \ - "${varaddr}," xstr(CONFIG_KM_PHRAM) "\0" \ "flashargs=" \ "setenv bootargs " \ - "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \ "root=mtdblock:rootfs${boot_bank} " \ "rootfstype=squashfs ro\0" \ "" @@ -261,9 +207,7 @@ */ #define CONFIG_KM_DEF_ENV_FLASH_BOOT \ "cramfsaddr=" xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \ - "cramfsloadkernel=" \ - "cramfsload ${kernel_addr_r} uImage && " \ - "setenv actual_kernel_addr ${kernel_addr_r}\0" \ + "cramfsloadkernel=cramfsload ${load_addr_r} uImage\0" \ "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME "\0" \ "ubicopy=ubi read "xstr(CONFIG_KM_CRAMFS_ADDR) \ " bootfs${boot_bank}\0" \ @@ -276,14 +220,8 @@ * - 'default': setup default environment */ #define CONFIG_KM_DEF_ENV_CONSTANTS \ - "actual=setenv boot_bank ${actual_bank}\0" \ - "backup=setenv boot_bank ${backup_bank}\0" \ - "actual_bank=${initial_boot_bank}\0" \ "backup_bank=0\0" \ - "default=" \ - "setenv default 'run newenv; reset' && " \ - "run release && saveenv; reset\0" \ - "checkboardid=km_checkbidhwk\0" \ + "release=run newenv; reset\0" \ "pnvramsize=" xstr(CONFIG_KM_PNVRAM) "\0" \ "" @@ -292,24 +230,27 @@ CONFIG_KM_DEF_ENV_BOOTPARAMS \ CONFIG_KM_DEF_NETDEV \ CONFIG_KM_DEF_ENV_CPU \ - CONFIG_KM_DEF_ENV_BOOTRUNNER \ CONFIG_KM_DEF_ENV_BOOTTARGETS \ CONFIG_KM_DEF_ENV_BOOTARGS \ CONFIG_KM_DEF_ENV_FLASH_BOOT \ CONFIG_KM_DEF_ENV_CONSTANTS \ "altbootcmd=run bootcmd\0" \ - "bootcmd=run default\0" \ + "bootcmd=km_checkbidhwk && " \ + " setenv bootcmd \'setenv boot_bank ${actual_bank}; " \ + "run ${subbootcmds}; reset\' && " \ + "setenv altbootcmd \'setenv boot_bank ${backup_bank}; " \ + "run ${subbootcmds}; reset\' && " \ + "saveenv && saveenv && boot\0" \ "bootlimit=2\0" \ "init=/sbin/init-overlay.sh\0" \ - "kernel_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \ - "load=tftpboot ${u-boot_addr_r} ${u-boot}\0" \ + "load_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \ + "load=tftpboot ${load_addr_r} ${u-boot}\0" \ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "stderr=serial\0" \ "stdin=serial\0" \ "stdout=serial\0" \ "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ - "u-boot_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \ "" #endif /* CONFIG_KM_DEF_ENV */ diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index d6db8d79f1..7aaa8d21e8 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -66,19 +66,19 @@ #define CONFIG_KM_KERNEL_ADDR 0x400000 /* 3968Kbytes */ #define CONFIG_KM_FDT_ADDR 0x7E0000 /* 128Kbytes */ +/* architecture specific default bootargs */ +#define CONFIG_KM_DEF_BOOT_ARGS_CPU "" + #define CONFIG_KM_DEF_ENV_CPU \ - "addbootcount=true\0" \ - "addmtdparts=true\0" \ - "boot=bootm ${actual_kernel_addr} - ${actual_fdt_addr}\0" \ + "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ "cramfsloadfdt=" \ "cramfsload ${fdt_addr_r} " \ - "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb && " \ - "setenv actual_fdt_addr ${fdt_addr_r}\0" \ + "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ "fdt_addr_r=" xstr(CONFIG_KM_FDT_ADDR) "\0" \ "update=" \ "protect off " xstr(BOOTFLASH_START) " +${filesize} && "\ "erase " xstr(BOOTFLASH_START) " +${filesize} && " \ - "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \ + "cp.b ${load_addr_r} " xstr(BOOTFLASH_START) \ " ${filesize} && " \ "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \ "" diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index f1eea26320..7eb5cd49f6 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -67,12 +67,12 @@ #define CONFIG_KM_CRAMFS_ADDR 0x2400000 #define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 4096KBytes */ +/* architecture specific default bootargs */ +#define CONFIG_KM_DEF_BOOT_ARGS_CPU \ + "bootcountaddr=${bootcountaddr} ${mtdparts}" + #define CONFIG_KM_DEF_ENV_CPU \ - "addbootcount=" \ - "setenv bootargs ${bootargs} " \ - "bootcountaddr=${bootcountaddr}\0" \ - "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "boot=bootm ${actual_kernel_addr} - -\0" \ + "boot=bootm ${load_addr_r} - -\0" \ "cramfsloadfdt=true\0" \ CONFIG_KM_DEF_ENV_UPDATE \ "" @@ -229,7 +229,7 @@ int get_scl(void); #define CONFIG_KM_DEF_ENV_UPDATE \ "update=" \ "spi on;sf probe 0;sf erase 0 50000;" \ - "sf write ${u-boot_addr_r} 0 ${filesize};" \ + "sf write ${load_addr_r} 0 ${filesize};" \ "spi off\0" /* -- 2.25.1