From d6fee7e016217462627b02ec7561c7696ed68402 Mon Sep 17 00:00:00 2001 From: ng0 Date: Thu, 7 Sep 2017 13:47:14 +0000 Subject: [PATCH] doc: trim chapters/installation.texi to move some very old instructions into an "archive" file. --- doc/Makefile.am | 3 +- doc/chapters/installation.texi | 511 +------------ ...ated-and-old-installation-instructions.txt | 672 ++++++++++++++++++ 3 files changed, 678 insertions(+), 508 deletions(-) create mode 100644 doc/outdated-and-old-installation-instructions.txt diff --git a/doc/Makefile.am b/doc/Makefile.am index 1e5a12321..72c073496 100644 --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -75,7 +75,8 @@ gnunet_TEXINFOS = \ EXTRA_DIST = \ $(gnunet_TEXINFOS) \ $(gnunet_doc_images) \ - $(gnunet_tutorial_examples) + $(gnunet_tutorial_examples) \ + outdated-and-old-installation-instructions.txt version.texi: echo "@set UPDATED $(date +'%d %B %Y')" > $@ diff --git a/doc/chapters/installation.texi b/doc/chapters/installation.texi index be458981f..edbad84de 100644 --- a/doc/chapters/installation.texi +++ b/doc/chapters/installation.texi @@ -1190,15 +1190,14 @@ and Postgres better resillience. This chapter contains a collection of outdated, older installation guides. They are mostly intended to serve as a starting point for writing up-to-date instructions and should not be expected to work for GNUnet 0.10.x. +A set of older installation instructions can also be found in the +@file{doc/outdated-and-old-installation-instructions.txt} in the source +of GNUnet. This file covers old instructions which no longer receive +security updates or any kind of support. @menu * Installing GNUnet 0.10.1 on Ubuntu 14.04:: -* Build instructions for FreeBSD 8:: -* Basic installation for Mac OS X:: -* Basic Installation for Fedora/PlanetLab nodes running Fedora 12:: -* Basic Installation for Fedora/PlanetLab nodes running Fedora 8 .:: -* Build instructions for Gentoo:: * Building GLPK for MinGW:: * GUI build instructions for Ubuntu 12.04 using Subversion:: * Installation with gnunet-update:: @@ -1297,508 +1296,6 @@ After installing it, you need to create an empty configuration file:@ And finally you can start GNUnet with@ @code{$ gnunet-arm -s} - -@node Build instructions for FreeBSD 8 -@subsection Build instructions for FreeBSD 8 - -To get GNUnet 0.9 to compile on FreeBSD (at least FreeBSD 8.0):@ in order to -install the library @code{libiconv}, at first change the directory to your -ports directory, e.g.@ -@code{@ - $ cd /usr/ports/@ -}@ - following that, go to the install file of @code{libiconv} and install it,@ -@code{@ - $ cd converters/libiconv,@ - $ make install@ -} - -after that, change the directory to where you will check out -@code{libextractor} and GNUnet, and install latest @code{libextractor},@ - first of all, checkout @code{libextractor}, e.g.@ -@code{@ - $ svn co https://gnunet.org/svn/Extractor@ -}@ - then change the directory into which it was checked out, e.g.@ -@code{@ - $ cd Extractor@ -}@ - before the installation, you should do following steps,@ - -@example -$ ./bootstrap@ -$ ./configure --with-ltdl-include=/usr/local/include \ - --with-ltdl-lib=/usr/local/lib@ -@end example - -if these steps complete successfully, you can install the library,@ - -@example -$ make install@ -@end example - -to check out the GNUnet, you should do the similar steps as -@code{libextractor}, firstly, change back to starting directory, e.g.@ -@code{@ - $ cd ../@ -}@ - Set the following environmental variables:@ -@code{@ - export CPPFLAGS="-I/usr/local/include"@ - export LDFLAGS="-L/usr/local/lib"@ -}@ - next, checkout GNUnet using@ -@code{@ - $ svn co https://gnunet.org/svn/gnunet@ -}@ - then change directory into newly checked out directory,@ -@code{@ - $ cd gnunet@ -}@ - at last, start to install GNUnet,@ - -@example - $ ./bootstrap@ - $ ./configure --with-ltdl-include=/usr/local/include \ - --with-ltdl-lib=/usr/local/lib --with-extractor=/usr/local - -## NOTE: you may not need the --with-extractor option!@ - -$ make install -@end example - -@node Basic installation for Mac OS X -@subsection Basic installation for Mac OS X - -This documentation may be outdated! - -This page is providing guidelines for users trying to install GNUnet on Mac OS -X.@ Mainly users trying to install GNUnet by building source code are the most -welcome readers.@ The steps below are tested on an Intel Architecture running -Mac OS X Tiger (10.4.11). Ideally they should work on other Mac boxes with -different configurations as all the configuration done for it is dependent on -@uref{http://www.macports.org/, MacPorts} - -For having GNUnet installed successfully, some dependencies should be firstly -resolved: - -@itemize @bullet - -@item -Install/Update your @uref{http://developer.apple.com/tools/xcode/, Xcode} -version 3.2.1 or later for Snow Leopard, 3.1.4 or later for Leopard, or 2.5 for -Tiger. - -@item -Download and install @uref{http://www.macports.org/, MacPorts}.@ -Now you are ready for installing GNunet dependencies. - -@item -First, you'd better make sure that: /opt/local/bin and /opt/local/sbin are -available in your PATH. (For doing so, open a terminal and type:@ - -@example -$ echo $PATH -@end example - -and examine the output of it). If the paths are not available in your -environment, you have to add them (You can add them by editing your .profile -file in your home directory, append them to the PATH line). Then type: -@example -$ source ~/.profile -@end example - -and re-examine the echo command output. - -@item -Use MacPorts to download and install the dependencies:@ -The libraries are: - -@itemize @bullet - -@item -@uref{http://trac.macports.org/browser/trunk/dports/www/libmicrohttpd/Portfile, libmicrohttpd.} - -@item -@uref{http://trac.macports.org/browser/trunk/dports/devel/libgcrypt/Portfile, libgcrypt.} - -@item -@uref{http://trac.macports.org/browser/trunk/dports/net/curl/Portfile, libcurl.} - -@item -@uref{http://trac.macports.org/browser/trunk/dports/devel/libtool/Portfile, libltdl.} - -@item -@uref{http://trac.macports.org/browser/trunk/dports/databases/sqlite3/Portfile, SQlite.} - -@item -libunistring - -@item -glpk - -@end itemize - -The port command is as follows:@ -@example -port install libmicrohttpd libgcrypt curl libtool sqlite3 linunistring glpk -@end example -One of the dependencies, the libextractor, should be explicitly installed, -since the version available from macports is outdated to work with GNUnet. To -install the latest libextractor: -@itemize @bullet - - -@item -Install the Subversion Client:@ -For more information about Subversion visit: -@uref{http://subversion.tigris.org/, http://subversion.tigris.org/} - -@example -# port install subversion -@end example - - -@item -Use Subversion to download the latest Extractor: -@example -$ svn checkout https://gnunet.org/svn/Extractor -@end example - - -@item -Go to the installation directory of the Extractor, compile and install it: -@example -$ ./bootstrap -$ export CPPFLAGS="-I/opt/local/include" -$ export LDFLAGS="-L/opt/local/lib" -$ ./configure --prefix=/opt/local -$ make -# make install -@end example - -@end itemize - - -@item -Now, your system is ready to install GNunet. If you downloaded GNUnet by -checking it out from svn, you should start by running the bootstrap script. -Open a terminal pointing to the GNUnet directory and type:@ - -@example -$ ./bootstrap -@end example - - -@item -Run the configure script: -@example -$ export CPPFLAGS="-I/opt/local/include" -$ export LDFLAGS="-L/opt/local/lib" -$ ./configure --prefix=/tmp/gnunet_build -@end example - - -GNUnet will be installed in the directory /tmp/gnunet_build (Of course that -installation path can be changed).@ The CPPFLAGS and LDFLAGS are mentioned in -order to inform the compiler and the linker to lookup headers and libraries in -/opt/local/include and /opt/local/lib. - -@item -Compile@ - -@example -$ make -@end example - - -@item -Install GNUnet -@example -# make install -@end example - -@end itemize - -@node Basic Installation for Fedora/PlanetLab nodes running Fedora 12 -@subsection Basic Installation for Fedora/PlanetLab nodes running Fedora 12 - - -@strong{This documentation is outdated and not valid for GNUnet 0.10.0!}@ - -GNUnet installation on Fedora 8/Planetlab nodes can be done as following: - -1. Install the build tools to build GNUnet@ -@example -sudo yum -y -t --nogpgcheck install gcc make autoconf gettext-devel \ -texinfo subversion@ -@end example - -2. Install the GNUnet dependencies@ -@example -sudo yum -y -t --nogpgcheck install libunistring-devel libunistring-devel \ -libgcrypt-devel zlib-devel sqlite-devel postgresql-devel mysql-devel \ -libgsf-devel libvorbis-devel@ -@end example - -3. Install outdated dependencies from source@ -libtool@ -@example -wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ -tar xvfz libtool-2.4.2.tar.gz@ -cd libtool-2.4.2@ -./configure@ -sudo make install@ -@end example - -glpk@ -@example -wget http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz@ -tar xvfz glpk-4.47.tar.gz@ -cd glpk-4.47@ -./configure@ -sudo make install@ -@end example - -libcurl@ -@example -wget http://curl.haxx.se/download/curl-7.26.0.tar.gz@ -tar xvfz curl-7.26.0.tar.gz@ -cd curl-7.26.0@ -./configure@ -sudo make install@ -@end example - -4. Install libextractor@ -@example -svn co https://gnunet.org/svn/libextractor@ -cd libextractor@ -libtoolize@ -./bootstrap@ -./configure@ -sudo make install@ -@end example - -5. Install libmicrohttpd@ -@example -svn co https://gnunet.org/svn/libmicrohttpd@ -cd libmicrohttpd@ -libtoolize@ -./bootstrap@ -./configure@ -sudo make install@ -@end example - -6. Set GNUnet prefix and add to PATH@ -@example -export GNUNET_PREFIX=@ -export PATH=$PATH:$GNUNET_PREFIX/bin@ -@end example - -7. Install GNUnet from svn@ -@example -export LD_LIBRARY_PATH=/usr/local/lib@ -svn co https://gnunet.org/svn/gnunet@ -cd gnunet@ -libtoolize@ -./bootstrap@ -./configure --prefix=$GNUNET_PREFIX --with-extractor=/usr \ - --with-mysql=/usr/lib/mysql --enable-logging=verbose@ -make install@ -@end example - -Done! - -@node Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . -@subsection Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . -@c %**end of header - -@strong{This documentation is outdated and not valid for GNUnet 0.10.0!}@ - GNUnet installation on Fedora 8/Planetlab nodes can be done as following: - -1. Install the build tools to build GNUnet@ -@example -sudo yum -y -t --nogpgcheck install gcc make automake autoconf gettext-devel \ -texinfo zlib-devel subversion@ -@end example - -2. Install the GNUnet dependencies@ -@example -sudo yum -y -t --nogpgcheck install gnutls-devel gnutls-devel libgcrypt-devel \ -sqlite-devel postgresql-devel mysql-devel libgsf-devel libvorbis-devel \ -libidn-devel -@end example - -3. Install outdated dependencies from source@ - libtool@ -@code{@ - wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ - tar xvfz libtool-2.4.2.tar.gz@ - cd libtool-2.4.2@ - ./configure@ - sudo make install@ -} - -libtool@ -@code{@ - wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ - tar xvfz libtool-2.4.2.tar.gz@ - cd libtool-2.4.2@ - ./configure@ - sudo make install@ -} - -glpk@ -@code{@ - wget http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz@ - tar xvfz glpk-4.47.tar.gz@ - cd glpk-4.47@ - ./configure@ - sudo make install@ -} - -libgpg-error@ -@code{@ - wget ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2@ - tar xvfj libgpg-error-1.10.tar.bz2@ - cd libgpg-error-1.10@ - ./configure --prefix=/usr@ - sudo make install@ -} - -libgcrypt@ -@code{@ - wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2@ - tar xvfj libgcrypt-1.5.0.tar.tar.bz2@ - cd libgcrypt-1.5.0@ - ./configure --prefix=/usr@ - sudo make install@ -} - -libcurl@ -@code{@ - wget http://curl.haxx.se/download/curl-7.26.0.tar.gz@ - tar xvfz curl-7.26.0.tar.gz@ - cd curl-7.26.0@ - ./configure@ - sudo make install@ -} - -libunistring@ -@code{@ - wget http://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz@ - tar xvfz libunistring-0.9.3.tar.gz@ - cd libunistring-0.9.3@ - ./configure@ - sudo make install@ -} - -4. Remove conflicting packages@ -@code{@ - sudo rpm -e --nodeps libgcrypt libgpg-error@ -} - -4. Install libextractor@ -@code{@ - wget ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz@ - tar xvfz libextractor-0.6.3.tar.gz@ - cd libextractor-0.6.3@ - ./configure@ - sudo make install@ -} - -5. Install libmicrohttpd and dependencies - -nettle@ -@code{@ - wget http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz@ - tar xvfz nettle-2.5.tar.gz@ - cd nettle-2.5@ - ./configure@ - sudo make install@ -} - -GnuTLS@ -@code{@ - wget http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2@ - tar xvfj gnutls-2.12.20.tar.bz2@ - cd gnutls-2.12.20@ - ./configure --without-p11-kit@ - sudo make install@ -} - -libmicrohttpd@ -@code{@ - wget ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz@ - tar xvfz libmicrohttpd-0.9.21.tar.gz@ - cd libmicrohttpd-0.9.21@ - ./configure@ - sudo make install@ -} - -6. Set GNUnet prefix and add to PATH@ -@code{@ - export GNUNET_PREFIX=@ - export PATH=$PATH:$GNUNET_PREFIX/bin@ -} - -7. Install GNUnet from svn@ -@example - export LD_LIBRARY_PATH=/usr/local/lib@ - svn co https://gnunet.org/svn/gnunet@ - cd gnunet@ - libtoolize@ - ./bootstrap@ - ./configure --prefix=$GNUNET_PREFIX --with-extractor=/usr/local \ - --with-curl=/usr/local --with-mysql=/usr/lib/mysql --enable-logging=verbose@ - make install@ -@end example - -Done! - -@node Build instructions for Gentoo -@subsection Build instructions for Gentoo - - -This page describes how to install GNUnet 0.9 on Gentoo. - -Since the GNUnet 0.9 ebuilds are not in the official portage tree yet, we need -to add them to the local portage overlay. All the commands below should be -executed as root. - -Specify your local portage directory in the /etc/make.conf, for example:@ -@code{$ echo 'PORTDIR_OVERLAY="/usr/local/portage"' >> /etc/make.conf} - -Create directories for the ebuilds:@ -@code{$ mkdir -p /usr/local/portage/media-libs/libextractor /usr/local/portage/net-p2p/gnunet/files} - -Download the latest ebuilds, init and config files from here and put them into -respective directories:@ -@code{$ cp libextractor-0.6.2.ebuild /usr/local/portage/media-libs/libextractor@ - $ cp gnunet-0.9.2.ebuild /usr/local/portage/net-p2p/gnunet@ - $ cp gnunet-0.9.2.conf gnunet-0.9.2.confd gnunet-0.9.2.initd /usr/local/portage/net-p2p/gnunet/files} - -Generate Manifest files for the ebuilds:@ -@code{$ cd /usr/local/portage/net-p2p/gnunet@ - $ ebuild gnunet-0.9.2.ebuild digest@ - $ cd /usr/local/portage/media-libs/libextractor@ - $ ebuild libextractor-0.6.2.ebuild digest} - -Unmask GNUnet and dependencies in the /etc/portage/package.keywords. For -example, if you use x86-64 architecture, add the following lines:@ -@code{net-p2p/gnunet ~amd64@ - media-libs/libextractor ~amd64@ - net-libs/libmicrohttpd ~amd64@ - net-misc/curl ~amd64} - -Add either sqlite or mysql USE-flag in the /etc/portage/package.use:@ -@code{net-p2p/gnunet sqlite} - -Now everything is ready to install GNUnet:@ -@code{$ emerge -av gnunet} - -Use /etc/init.d/gnunet to start/stop GNUnet. - @node Building GLPK for MinGW @subsection Building GLPK for MinGW diff --git a/doc/outdated-and-old-installation-instructions.txt b/doc/outdated-and-old-installation-instructions.txt new file mode 100644 index 000000000..f2cbe1847 --- /dev/null +++ b/doc/outdated-and-old-installation-instructions.txt @@ -0,0 +1,672 @@ +# This file contains pieces from chapter/installation.texi for systems where the LTS or otherwise support +# ended. They can be useful for people trying to write new installation instructions for those systems. +# In particual this covers: +# - FreeBSD 8 +# - Mac OS X Tiger +# - Fedora 8 +# - Gentoo with GNUnet 0.9 +# +# Sources for LTS and support ranges: +# https://www.freebsd.org/security/security.html#sup +# https://support.microsoft.com/en-us/help/17140/lifecycle-faq-general-policy-questions +# Mac products, OS is supposedly similar (no official statements exist): https://web.archive.org/web/20160706101225/https://support.apple.com/en-us/HT201624 +# https://wiki.debian.org/LTS +# https://www.ubuntu.com/info/release-end-of-life + +@node Build instructions for Gentoo +@subsection Build instructions for Gentoo + + +This page describes how to install GNUnet 0.9 on Gentoo. + +Since the GNUnet 0.9 ebuilds are not in the official portage tree yet, we need +to add them to the local portage overlay. All the commands below should be +executed as root. + +Specify your local portage directory in the /etc/make.conf, for example:@ +@code{$ echo 'PORTDIR_OVERLAY="/usr/local/portage"' >> /etc/make.conf} + +Create directories for the ebuilds:@ +@code{$ mkdir -p /usr/local/portage/media-libs/libextractor /usr/local/portage/net-p2p/gnunet/files} + +Download the latest ebuilds, init and config files from here and put them into +respective directories:@ +@code{$ cp libextractor-0.6.2.ebuild /usr/local/portage/media-libs/libextractor@ + $ cp gnunet-0.9.2.ebuild /usr/local/portage/net-p2p/gnunet@ + $ cp gnunet-0.9.2.conf gnunet-0.9.2.confd gnunet-0.9.2.initd /usr/local/portage/net-p2p/gnunet/files} + +Generate Manifest files for the ebuilds:@ +@code{$ cd /usr/local/portage/net-p2p/gnunet@ + $ ebuild gnunet-0.9.2.ebuild digest@ + $ cd /usr/local/portage/media-libs/libextractor@ + $ ebuild libextractor-0.6.2.ebuild digest} + +Unmask GNUnet and dependencies in the /etc/portage/package.keywords. For +example, if you use x86-64 architecture, add the following lines:@ +@code{net-p2p/gnunet ~amd64@ + media-libs/libextractor ~amd64@ + net-libs/libmicrohttpd ~amd64@ + net-misc/curl ~amd64} + +Add either sqlite or mysql USE-flag in the /etc/portage/package.use:@ +@code{net-p2p/gnunet sqlite} + +Now everything is ready to install GNUnet:@ +@code{$ emerge -av gnunet} + +Use /etc/init.d/gnunet to start/stop GNUnet. + + + + +@node Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . +@subsection Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . +@c %**end of header + +@strong{This documentation is outdated and not valid for GNUnet 0.10.0!}@ + GNUnet installation on Fedora 8/Planetlab nodes can be done as following: + +1. Install the build tools to build GNUnet@ +@example +sudo yum -y -t --nogpgcheck install gcc make automake autoconf gettext-devel \ +texinfo zlib-devel subversion@ +@end example + +2. Install the GNUnet dependencies@ +@example +sudo yum -y -t --nogpgcheck install gnutls-devel gnutls-devel libgcrypt-devel \ +sqlite-devel postgresql-devel mysql-devel libgsf-devel libvorbis-devel \ +libidn-devel +@end example + +3. Install outdated dependencies from source@ + libtool@ +@code{@ + wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ + tar xvfz libtool-2.4.2.tar.gz@ + cd libtool-2.4.2@ + ./configure@ + sudo make install@ +} + +libtool@ +@code{@ + wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ + tar xvfz libtool-2.4.2.tar.gz@ + cd libtool-2.4.2@ + ./configure@ + sudo make install@ +} + +glpk@ +@code{@ + wget http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz@ + tar xvfz glpk-4.47.tar.gz@ + cd glpk-4.47@ + ./configure@ + sudo make install@ +} + +libgpg-error@ +@code{@ + wget ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2@ + tar xvfj libgpg-error-1.10.tar.bz2@ + cd libgpg-error-1.10@ + ./configure --prefix=/usr@ + sudo make install@ +} + +libgcrypt@ +@code{@ + wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2@ + tar xvfj libgcrypt-1.5.0.tar.tar.bz2@ + cd libgcrypt-1.5.0@ + ./configure --prefix=/usr@ + sudo make install@ +} + +libcurl@ +@code{@ + wget http://curl.haxx.se/download/curl-7.26.0.tar.gz@ + tar xvfz curl-7.26.0.tar.gz@ + cd curl-7.26.0@ + ./configure@ + sudo make install@ +} + +libunistring@ +@code{@ + wget http://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz@ + tar xvfz libunistring-0.9.3.tar.gz@ + cd libunistring-0.9.3@ + ./configure@ + sudo make install@ +} + +4. Remove conflicting packages@ +@code{@ + sudo rpm -e --nodeps libgcrypt libgpg-error@ +} + +4. Install libextractor@ +@code{@ + wget ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz@ + tar xvfz libextractor-0.6.3.tar.gz@ + cd libextractor-0.6.3@ + ./configure@ + sudo make install@ +} + +5. Install libmicrohttpd and dependencies + +nettle@ +@code{@ + wget http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz@ + tar xvfz nettle-2.5.tar.gz@ + cd nettle-2.5@ + ./configure@ + sudo make install@ +} + +GnuTLS@ +@code{@ + wget http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2@ + tar xvfj gnutls-2.12.20.tar.bz2@ + cd gnutls-2.12.20@ + ./configure --without-p11-kit@ + sudo make install@ +} + +libmicrohttpd@ +@code{@ + wget ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz@ + tar xvfz libmicrohttpd-0.9.21.tar.gz@ + cd libmicrohttpd-0.9.21@ + ./configure@ + sudo make install@ +} + +6. Set GNUnet prefix and add to PATH@ +@code{@ + export GNUNET_PREFIX=@ + export PATH=$PATH:$GNUNET_PREFIX/bin@ +} + +7. Install GNUnet from svn@ +@example + export LD_LIBRARY_PATH=/usr/local/lib@ + svn co https://gnunet.org/svn/gnunet@ + cd gnunet@ + libtoolize@ + ./bootstrap@ + ./configure --prefix=$GNUNET_PREFIX --with-extractor=/usr/local \ + --with-curl=/usr/local --with-mysql=/usr/lib/mysql --enable-logging=verbose@ + make install@ +@end example + +Done! + + +@node Build instructions for FreeBSD 8 +@subsection Build instructions for FreeBSD 8 + +To get GNUnet 0.9 to compile on FreeBSD (at least FreeBSD 8.0):@ in order to +install the library @code{libiconv}, at first change the directory to your +ports directory, e.g.@ +@code{@ + $ cd /usr/ports/@ +}@ + following that, go to the install file of @code{libiconv} and install it,@ +@code{@ + $ cd converters/libiconv,@ + $ make install@ +} + +after that, change the directory to where you will check out +@code{libextractor} and GNUnet, and install latest @code{libextractor},@ + first of all, checkout @code{libextractor}, e.g.@ +@code{@ + $ svn co https://gnunet.org/svn/Extractor@ +}@ + then change the directory into which it was checked out, e.g.@ +@code{@ + $ cd Extractor@ +}@ + before the installation, you should do following steps,@ + +@example +$ ./bootstrap@ +$ ./configure --with-ltdl-include=/usr/local/include \ + --with-ltdl-lib=/usr/local/lib@ +@end example + +if these steps complete successfully, you can install the library,@ + +@example +$ make install@ +@end example + +to check out the GNUnet, you should do the similar steps as +@code{libextractor}, firstly, change back to starting directory, e.g.@ +@code{@ + $ cd ../@ +}@ + Set the following environmental variables:@ +@code{@ + export CPPFLAGS="-I/usr/local/include"@ + export LDFLAGS="-L/usr/local/lib"@ +}@ + next, checkout GNUnet using@ +@code{@ + $ svn co https://gnunet.org/svn/gnunet@ +}@ + then change directory into newly checked out directory,@ +@code{@ + $ cd gnunet@ +}@ + at last, start to install GNUnet,@ + +@example + $ ./bootstrap@ + $ ./configure --with-ltdl-include=/usr/local/include \ + --with-ltdl-lib=/usr/local/lib --with-extractor=/usr/local + +## NOTE: you may not need the --with-extractor option!@ + +$ make install +@end example + + + +@node Basic installation for Mac OS X +@subsection Basic installation for Mac OS X + +This documentation may be outdated! + +This page is providing guidelines for users trying to install GNUnet on Mac OS +X.@ Mainly users trying to install GNUnet by building source code are the most +welcome readers.@ The steps below are tested on an Intel Architecture running +Mac OS X Tiger (10.4.11). Ideally they should work on other Mac boxes with +different configurations as all the configuration done for it is dependent on +@uref{http://www.macports.org/, MacPorts} + +For having GNUnet installed successfully, some dependencies should be firstly +resolved: + +@itemize @bullet + +@item +Install/Update your @uref{http://developer.apple.com/tools/xcode/, Xcode} +version 3.2.1 or later for Snow Leopard, 3.1.4 or later for Leopard, or 2.5 for +Tiger. + +@item +Download and install @uref{http://www.macports.org/, MacPorts}.@ +Now you are ready for installing GNunet dependencies. + +@item +First, you'd better make sure that: /opt/local/bin and /opt/local/sbin are +available in your PATH. (For doing so, open a terminal and type:@ + +@example +$ echo $PATH +@end example + +and examine the output of it). If the paths are not available in your +environment, you have to add them (You can add them by editing your .profile +file in your home directory, append them to the PATH line). Then type: +@example +$ source ~/.profile +@end example + +and re-examine the echo command output. + +@item +Use MacPorts to download and install the dependencies:@ +The libraries are: + +@itemize @bullet + +@item +@uref{http://trac.macports.org/browser/trunk/dports/www/libmicrohttpd/Portfile, libmicrohttpd.} + +@item +@uref{http://trac.macports.org/browser/trunk/dports/devel/libgcrypt/Portfile, libgcrypt.} + +@item +@uref{http://trac.macports.org/browser/trunk/dports/net/curl/Portfile, libcurl.} + +@item +@uref{http://trac.macports.org/browser/trunk/dports/devel/libtool/Portfile, libltdl.} + +@item +@uref{http://trac.macports.org/browser/trunk/dports/databases/sqlite3/Portfile, SQlite.} + +@item +libunistring + +@item +glpk + +@end itemize + +The port command is as follows:@ +@example +port install libmicrohttpd libgcrypt curl libtool sqlite3 linunistring glpk +@end example +One of the dependencies, the libextractor, should be explicitly installed, +since the version available from macports is outdated to work with GNUnet. To +install the latest libextractor: +@itemize @bullet + + +@item +Install the Subversion Client:@ +For more information about Subversion visit: +@uref{http://subversion.tigris.org/, http://subversion.tigris.org/} + +@example +# port install subversion +@end example + + +@item +Use Subversion to download the latest Extractor: +@example +$ svn checkout https://gnunet.org/svn/Extractor +@end example + + +@item +Go to the installation directory of the Extractor, compile and install it: +@example +$ ./bootstrap +$ export CPPFLAGS="-I/opt/local/include" +$ export LDFLAGS="-L/opt/local/lib" +$ ./configure --prefix=/opt/local +$ make +# make install +@end example + +@end itemize + + +@item +Now, your system is ready to install GNunet. If you downloaded GNUnet by +checking it out from svn, you should start by running the bootstrap script. +Open a terminal pointing to the GNUnet directory and type:@ + +@example +$ ./bootstrap +@end example + + +@item +Run the configure script: +@example +$ export CPPFLAGS="-I/opt/local/include" +$ export LDFLAGS="-L/opt/local/lib" +$ ./configure --prefix=/tmp/gnunet_build +@end example + + +GNUnet will be installed in the directory /tmp/gnunet_build (Of course that +installation path can be changed).@ The CPPFLAGS and LDFLAGS are mentioned in +order to inform the compiler and the linker to lookup headers and libraries in +/opt/local/include and /opt/local/lib. + +@item +Compile@ + +@example +$ make +@end example + + +@item +Install GNUnet +@example +# make install +@end example + +@end itemize + + +@node Basic Installation for Fedora/PlanetLab nodes running Fedora 12 +@subsection Basic Installation for Fedora/PlanetLab nodes running Fedora 12 + + +@strong{This documentation is outdated and not valid for GNUnet 0.10.0!}@ + +GNUnet installation on Fedora 8/Planetlab nodes can be done as following: + +1. Install the build tools to build GNUnet@ +@example +sudo yum -y -t --nogpgcheck install gcc make autoconf gettext-devel \ +texinfo subversion@ +@end example + +2. Install the GNUnet dependencies@ +@example +sudo yum -y -t --nogpgcheck install libunistring-devel libunistring-devel \ +libgcrypt-devel zlib-devel sqlite-devel postgresql-devel mysql-devel \ +libgsf-devel libvorbis-devel@ +@end example + +3. Install outdated dependencies from source@ +libtool@ +@example +wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ +tar xvfz libtool-2.4.2.tar.gz@ +cd libtool-2.4.2@ +./configure@ +sudo make install@ +@end example + +glpk@ +@example +wget http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz@ +tar xvfz glpk-4.47.tar.gz@ +cd glpk-4.47@ +./configure@ +sudo make install@ +@end example + +libcurl@ +@example +wget http://curl.haxx.se/download/curl-7.26.0.tar.gz@ +tar xvfz curl-7.26.0.tar.gz@ +cd curl-7.26.0@ +./configure@ +sudo make install@ +@end example + +4. Install libextractor@ +@example +svn co https://gnunet.org/svn/libextractor@ +cd libextractor@ +libtoolize@ +./bootstrap@ +./configure@ +sudo make install@ +@end example + +5. Install libmicrohttpd@ +@example +svn co https://gnunet.org/svn/libmicrohttpd@ +cd libmicrohttpd@ +libtoolize@ +./bootstrap@ +./configure@ +sudo make install@ +@end example + +6. Set GNUnet prefix and add to PATH@ +@example +export GNUNET_PREFIX=@ +export PATH=$PATH:$GNUNET_PREFIX/bin@ +@end example + +7. Install GNUnet from svn@ +@example +export LD_LIBRARY_PATH=/usr/local/lib@ +svn co https://gnunet.org/svn/gnunet@ +cd gnunet@ +libtoolize@ +./bootstrap@ +./configure --prefix=$GNUNET_PREFIX --with-extractor=/usr \ + --with-mysql=/usr/lib/mysql --enable-logging=verbose@ +make install@ +@end example + +Done! + + +@node Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . +@subsection Basic Installation for Fedora/PlanetLab nodes running Fedora 8 . +@c %**end of header + +@strong{This documentation is outdated and not valid for GNUnet 0.10.0!}@ + GNUnet installation on Fedora 8/Planetlab nodes can be done as following: + +1. Install the build tools to build GNUnet@ +@example +sudo yum -y -t --nogpgcheck install gcc make automake autoconf gettext-devel \ +texinfo zlib-devel subversion@ +@end example + +2. Install the GNUnet dependencies@ +@example +sudo yum -y -t --nogpgcheck install gnutls-devel gnutls-devel libgcrypt-devel \ +sqlite-devel postgresql-devel mysql-devel libgsf-devel libvorbis-devel \ +libidn-devel +@end example + +3. Install outdated dependencies from source@ + libtool@ +@code{@ + wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ + tar xvfz libtool-2.4.2.tar.gz@ + cd libtool-2.4.2@ + ./configure@ + sudo make install@ +} + +libtool@ +@code{@ + wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz@ + tar xvfz libtool-2.4.2.tar.gz@ + cd libtool-2.4.2@ + ./configure@ + sudo make install@ +} + +glpk@ +@code{@ + wget http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz@ + tar xvfz glpk-4.47.tar.gz@ + cd glpk-4.47@ + ./configure@ + sudo make install@ +} + +libgpg-error@ +@code{@ + wget ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2@ + tar xvfj libgpg-error-1.10.tar.bz2@ + cd libgpg-error-1.10@ + ./configure --prefix=/usr@ + sudo make install@ +} + +libgcrypt@ +@code{@ + wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2@ + tar xvfj libgcrypt-1.5.0.tar.tar.bz2@ + cd libgcrypt-1.5.0@ + ./configure --prefix=/usr@ + sudo make install@ +} + +libcurl@ +@code{@ + wget http://curl.haxx.se/download/curl-7.26.0.tar.gz@ + tar xvfz curl-7.26.0.tar.gz@ + cd curl-7.26.0@ + ./configure@ + sudo make install@ +} + +libunistring@ +@code{@ + wget http://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz@ + tar xvfz libunistring-0.9.3.tar.gz@ + cd libunistring-0.9.3@ + ./configure@ + sudo make install@ +} + +4. Remove conflicting packages@ +@code{@ + sudo rpm -e --nodeps libgcrypt libgpg-error@ +} + +4. Install libextractor@ +@code{@ + wget ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz@ + tar xvfz libextractor-0.6.3.tar.gz@ + cd libextractor-0.6.3@ + ./configure@ + sudo make install@ +} + +5. Install libmicrohttpd and dependencies + +nettle@ +@code{@ + wget http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz@ + tar xvfz nettle-2.5.tar.gz@ + cd nettle-2.5@ + ./configure@ + sudo make install@ +} + +GnuTLS@ +@code{@ + wget http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2@ + tar xvfj gnutls-2.12.20.tar.bz2@ + cd gnutls-2.12.20@ + ./configure --without-p11-kit@ + sudo make install@ +} + +libmicrohttpd@ +@code{@ + wget ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz@ + tar xvfz libmicrohttpd-0.9.21.tar.gz@ + cd libmicrohttpd-0.9.21@ + ./configure@ + sudo make install@ +} + +6. Set GNUnet prefix and add to PATH@ +@code{@ + export GNUNET_PREFIX=@ + export PATH=$PATH:$GNUNET_PREFIX/bin@ +} + +7. Install GNUnet from svn@ +@example + export LD_LIBRARY_PATH=/usr/local/lib@ + svn co https://gnunet.org/svn/gnunet@ + cd gnunet@ + libtoolize@ + ./bootstrap@ + ./configure --prefix=$GNUNET_PREFIX --with-extractor=/usr/local \ + --with-curl=/usr/local --with-mysql=/usr/lib/mysql --enable-logging=verbose@ + make install@ +@end example + +Done! + + -- 2.25.1