From d326f4a242971928ef5a6efb411a604b0478ef1c Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Thu, 16 Mar 2006 15:19:35 +0100 Subject: [PATCH] Add command for handling DDR ECC registers on MPC8349EE MDS board. --- CHANGELOG | 2 + board/mpc8349emds/mpc8349emds.c | 327 ++++++++++++++++++++++++++++++++ doc/README.mpc8349emds.ddrecc | 135 +++++++++++++ include/configs/MPC8349EMDS.h | 1 + 4 files changed, 465 insertions(+) create mode 100644 doc/README.mpc8349emds.ddrecc diff --git a/CHANGELOG b/CHANGELOG index e8f4f66f18..9274bdb357 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add command for handling DDR ECC registers on MPC8349EE MDS board. + * Fix DDR ECC bit definitions for MPC83xx. * Add initial support for MPC8349E MDS board. diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c index cff4774206..a468c5a7b5 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/mpc8349emds/mpc8349emds.c @@ -29,6 +29,7 @@ #include #include #include +#include #if defined(CONFIG_PCI) #include #endif @@ -277,3 +278,329 @@ void sdram_init(void) put("SDRAM on Local Bus is NOT available!\n"); } #endif + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) +/* + * ECC user commands + */ +void ecc_print_status(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile ddr8349_t *ddr = &immap->ddr; + + printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); + + /* Interrupts */ + printf("Memory Error Interrupt Enable:\n"); + printf(" Multiple-Bit Error Interrupt Enable: %d\n", + (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0); + printf(" Single-Bit Error Interrupt Enable: %d\n", + (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0); + printf(" Memory Select Error Interrupt Enable: %d\n\n", + (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0); + + /* Error disable */ + printf("Memory Error Disable:\n"); + printf(" Multiple-Bit Error Disable: %d\n", + (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0); + printf(" Sinle-Bit Error Disable: %d\n", + (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0); + printf(" Memory Select Error Disable: %d\n\n", + (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0); + + /* Error injection */ + printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n", + ddr->data_err_inject_hi, ddr->data_err_inject_lo); + + printf("Memory Data Path Error Injection Mask ECC:\n"); + printf(" ECC Mirror Byte: %d\n", + (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0); + printf(" ECC Injection Enable: %d\n", + (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0); + printf(" ECC Error Injection Mask: 0x%02x\n\n", + ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM); + + /* SBE counter/threshold */ + printf("Memory Single-Bit Error Management (0..255):\n"); + printf(" Single-Bit Error Threshold: %d\n", + (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT); + printf(" Single-Bit Error Counter: %d\n\n", + (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT); + + /* Error detect */ + printf("Memory Error Detect:\n"); + printf(" Multiple Memory Errors: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0); + printf(" Multiple-Bit Error: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0); + printf(" Single-Bit Error: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0); + printf(" Memory Select Error: %d\n\n", + (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0); + + /* Capture data */ + printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address); + printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n", + ddr->capture_data_hi, ddr->capture_data_lo); + printf("Memory Data Path Read Capture ECC: 0x%02x\n\n", + ddr->capture_ecc & CAPTURE_ECC_ECE); + + printf("Memory Error Attributes Capture:\n"); + printf(" Data Beat Number: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT); + printf(" Transaction Size: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT); + printf(" Transaction Source: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT); + printf(" Transaction Type: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT); + printf(" Error Information Valid: %d\n\n", + ddr->capture_attributes & ECC_CAPT_ATTR_VLD); +} + +int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile ddr8349_t *ddr = &immap->ddr; + volatile u32 val; + u64 *addr, count, val64; + register u64 *i; + + if (argc > 4) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (argc == 2) { + if (strcmp(argv[1], "status") == 0) { + ecc_print_status(); + return 0; + } else if (strcmp(argv[1], "captureclear") == 0) { + ddr->capture_address = 0; + ddr->capture_data_hi = 0; + ddr->capture_data_lo = 0; + ddr->capture_ecc = 0; + ddr->capture_attributes = 0; + return 0; + } + } + + if (argc == 3) { + if (strcmp(argv[1], "sbecnt") == 0) { + val = simple_strtoul(argv[2], NULL, 10); + if (val > 255) { + printf("Incorrect Counter value, should be 0..255\n"); + return 1; + } + + val = (val << ECC_ERROR_MAN_SBEC_SHIFT); + val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET); + + ddr->err_sbe = val; + return 0; + } else if (strcmp(argv[1], "sbethr") == 0) { + val = simple_strtoul(argv[2], NULL, 10); + if (val > 255) { + printf("Incorrect Counter value, should be 0..255\n"); + return 1; + } + + val = (val << ECC_ERROR_MAN_SBET_SHIFT); + val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC); + + ddr->err_sbe = val; + return 0; + } else if (strcmp(argv[1], "errdisable") == 0) { + val = ddr->err_disable; + + if (strcmp(argv[2], "+sbe") == 0) { + val |= ECC_ERROR_DISABLE_SBED; + } else if (strcmp(argv[2], "+mbe") == 0) { + val |= ECC_ERROR_DISABLE_MBED; + } else if (strcmp(argv[2], "+mse") == 0) { + val |= ECC_ERROR_DISABLE_MSED; + } else if (strcmp(argv[2], "+all") == 0) { + val |= (ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | + ECC_ERROR_DISABLE_MSED); + } else if (strcmp(argv[2], "-sbe") == 0) { + val &= ~ECC_ERROR_DISABLE_SBED; + } else if (strcmp(argv[2], "-mbe") == 0) { + val &= ~ECC_ERROR_DISABLE_MBED; + } else if (strcmp(argv[2], "-mse") == 0) { + val &= ~ECC_ERROR_DISABLE_MSED; + } else if (strcmp(argv[2], "-all") == 0) { + val &= ~(ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | + ECC_ERROR_DISABLE_MSED); + } else { + printf("Incorrect err_disable field\n"); + return 1; + } + + ddr->err_disable = val; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + return 0; + } else if (strcmp(argv[1], "errdetectclr") == 0) { + val = ddr->err_detect; + + if (strcmp(argv[2], "mme") == 0) { + val |= ECC_ERROR_DETECT_MME; + } else if (strcmp(argv[2], "sbe") == 0) { + val |= ECC_ERROR_DETECT_SBE; + } else if (strcmp(argv[2], "mbe") == 0) { + val |= ECC_ERROR_DETECT_MBE; + } else if (strcmp(argv[2], "mse") == 0) { + val |= ECC_ERROR_DETECT_MSE; + } else if (strcmp(argv[2], "all") == 0) { + val |= (ECC_ERROR_DETECT_MME | + ECC_ERROR_DETECT_MBE | + ECC_ERROR_DETECT_SBE | + ECC_ERROR_DETECT_MSE); + } else { + printf("Incorrect err_detect field\n"); + return 1; + } + + ddr->err_detect = val; + return 0; + } else if (strcmp(argv[1], "injectdatahi") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + + ddr->data_err_inject_hi = val; + return 0; + } else if (strcmp(argv[1], "injectdatalo") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + + ddr->data_err_inject_lo = val; + return 0; + } else if (strcmp(argv[1], "injectecc") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + if (val > 0xff) { + printf("Incorrect ECC inject mask, should be 0x00..0xff\n"); + return 1; + } + val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM); + + ddr->ecc_err_inject = val; + return 0; + } else if (strcmp(argv[1], "inject") == 0) { + val = ddr->ecc_err_inject; + + if (strcmp(argv[2], "en") == 0) + val |= ECC_ERR_INJECT_EIEN; + else if (strcmp(argv[2], "dis") == 0) + val &= ~ECC_ERR_INJECT_EIEN; + else + printf("Incorrect command\n"); + + ddr->ecc_err_inject = val; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + return 0; + } else if (strcmp(argv[1], "mirror") == 0) { + val = ddr->ecc_err_inject; + + if (strcmp(argv[2], "en") == 0) + val |= ECC_ERR_INJECT_EMB; + else if (strcmp(argv[2], "dis") == 0) + val &= ~ECC_ERR_INJECT_EMB; + else + printf("Incorrect command\n"); + + ddr->ecc_err_inject = val; + return 0; + } + } + + if (argc == 4) { + if (strcmp(argv[1], "test") == 0) { + addr = (u64 *)simple_strtoul(argv[2], NULL, 16); + count = simple_strtoul(argv[3], NULL, 16); + + if ((u32)addr % 8) { + printf("Address not alligned on double word boundary\n"); + return 1; + } + + disable_interrupts(); + icache_disable(); + + for (i = addr; i < addr + count; i++) { + /* enable injects */ + ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* write memory location injecting errors */ + *i = 0x1122334455667788ULL; + __asm__ __volatile__ ("sync"); + + /* disable injects */ + ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* read data, this generates ECC error */ + val64 = *i; + __asm__ __volatile__ ("sync"); + + /* disable errors for ECC */ + ddr->err_disable |= ~ECC_ERROR_ENABLE; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* re-initialize memory, write the location again + * NOT injecting errors this time */ + *i = 0xcafecafecafecafeULL; + __asm__ __volatile__ ("sync"); + + /* enable errors for ECC */ + ddr->err_disable &= ECC_ERROR_ENABLE; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + } + + icache_enable(); + enable_interrupts(); + + return 0; + } + } + + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; +} + +U_BOOT_CMD( + ecc, 4, 0, do_ecc, + "ecc - support for DDR ECC features\n", + "status - print out status info\n" + "ecc captureclear - clear capture regs data\n" + "ecc sbecnt - set Single-Bit Error counter\n" + "ecc sbethr - set Single-Bit Threshold\n" + "ecc errdisable - clear/set disable Memory Error Disable, flag:\n" + " [-|+]sbe - Single-Bit Error\n" + " [-|+]mbe - Multiple-Bit Error\n" + " [-|+]mse - Memory Select Error\n" + " [-|+]all - all errors\n" + "ecc errdetectclr - clear Memory Error Detect, flag:\n" + " mme - Multiple Memory Errors\n" + " sbe - Single-Bit Error\n" + " mbe - Multiple-Bit Error\n" + " mse - Memory Select Error\n" + " all - all errors\n" + "ecc injectdatahi - set Memory Data Path Error Injection Mask High\n" + "ecc injectdatalo - set Memory Data Path Error Injection Mask Low\n" + "ecc injectecc - set ECC Error Injection Mask\n" + "ecc inject - enable/disable error injection\n" + "ecc mirror - enable/disable mirror byte\n" + "ecc test - test mem region:\n" + " - enables injects\n" + " - writes pattern injecting errors\n" + " - disables injects\n" + " - reads pattern back, generates error\n" + " - re-inits memory" +); +#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */ diff --git a/doc/README.mpc8349emds.ddrecc b/doc/README.mpc8349emds.ddrecc new file mode 100644 index 0000000000..d8edada565 --- /dev/null +++ b/doc/README.mpc8349emds.ddrecc @@ -0,0 +1,135 @@ + + +Use cases for DDR 'ecc' command: +================================ + +Before executing particular tests reset target board or clear status registers: + +=> ecc captureclear +=> ecc errdetectclr all +=> ecc sbecnt 0 + + +Injecting Single-Bit Errors +--------------------------- + +1. Set 1 bit in Data Path Error Inject Mask + +=> ecc injectdatahi 1 + +2. Run test over some memory region + +=> ecc test 200000 10 + +3. Check ECC status + +=> ecc status +... +Memory Data Path Error Injection Mask High/Low: 00000001 00000000 +... +Memory Single-Bit Error Management (0..255): + Single-Bit Error Threshold: 255 + Single Bit Error Counter: 16 +... +Memory Error Detect: + Multiple Memory Errors: 0 + Multiple-Bit Error: 0 + Single-Bit Error: 0 +... + +16 errors were generated, Single-Bit Error flag was not set as Single Bit Error +Counter did not reach Single-Bit Error Threshold. + +4. Make sure used memory region got re-initialized with 0xcafecafe pattern + +=> md 200000 +00200000: cafecafe cafecafe cafecafe cafecafe ................ +00200010: cafecafe cafecafe cafecafe cafecafe ................ +00200020: cafecafe cafecafe cafecafe cafecafe ................ +00200030: cafecafe cafecafe cafecafe cafecafe ................ +00200040: cafecafe cafecafe cafecafe cafecafe ................ +00200050: cafecafe cafecafe cafecafe cafecafe ................ +00200060: cafecafe cafecafe cafecafe cafecafe ................ +00200070: cafecafe cafecafe cafecafe cafecafe ................ +00200080: deadbeef deadbeef deadbeef deadbeef ................ +00200090: deadbeef deadbeef deadbeef deadbeef ................ + + +Injecting Multiple-Bit Errors +----------------------------- + +1. Set more than 1 bit in Data Path Error Inject Mask + +=> ecc injectdatahi 5 + +2. Run test over some memory region + +=> ecc test 200000 10 + +3. Check ECC status + +=> ecc status +... +Memory Data Path Error Injection Mask High/Low: 00000005 00000000 +... +Memory Error Detect: + Multiple Memory Errors: 1 + Multiple-Bit Error: 1 + Single-Bit Error: 0 +... + +Observe that both Multiple Memory Errors and Multiple-Bit Error flags are set. + +4. Make sure used memory region got re-initialized with 0xcafecafe pattern + +=> md 200000 +00200000: cafecafe cafecafe cafecafe cafecafe ................ +00200010: cafecafe cafecafe cafecafe cafecafe ................ +00200020: cafecafe cafecafe cafecafe cafecafe ................ +00200030: cafecafe cafecafe cafecafe cafecafe ................ +00200040: cafecafe cafecafe cafecafe cafecafe ................ +00200050: cafecafe cafecafe cafecafe cafecafe ................ +00200060: cafecafe cafecafe cafecafe cafecafe ................ +00200070: cafecafe cafecafe cafecafe cafecafe ................ +00200080: deadbeef deadbeef deadbeef deadbeef ................ +00200090: deadbeef deadbeef deadbeef deadbeef ................ + + +Test Single-Bit Error Counter and Threshold +------------------------------------------- + +1. Set 1 bit in Data Path Error Inject Mask + +=> ecc injectdatahi 1 + +2. Enable error injection + +=> ecc inject en + +3. Let u-boot run for a with Single-Bit error injection enabled + +4. Disable error injection + +=> ecc inject dis + +4. Check status + +=> ecc status + +... +Memory Single-Bit Error Management (0..255): + Single-Bit Error Threshold: 255 + Single Bit Error Counter: 60 + +Memory Error Detect: + Multiple Memory Errors: 1 + Multiple-Bit Error: 0 + Single-Bit Error: 1 +... + +Observe that Single-Bit Error is 'on' which means that Single-Bit Error Counter +reached Single-Bit Error Threshold. Multiple Memory Errors bit is also 'on', that +is Counter reached Threshold more than one time (it wraps back after reaching +Threshold). + + diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index ef2eced3f3..c2bd0f5cea 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -70,6 +70,7 @@ * DDR Setup */ #define CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ #define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ -- 2.25.1