From d0750bc9e5932baf4c90eda2456106f21a26bdc1 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 1 Feb 2010 11:36:29 +0100 Subject: [PATCH] EXBITGEN: drop support for unmaintained board The EXBITGEN board has not been maintained for a long time; it has build problems, but no hardware is available any more for testing. Drop support for this board. Signed-off-by: Wolfgang Denk Acked-by: Stefan Roese --- MAINTAINERS | 2 - MAKEALL | 1 - Makefile | 3 - board/exbitgen/Makefile | 52 -- board/exbitgen/config.mk | 33 -- board/exbitgen/exbitgen.c | 126 ----- board/exbitgen/exbitgen.h | 52 -- board/exbitgen/flash.c | 597 ---------------------- board/exbitgen/init.S | 1011 ------------------------------------- 9 files changed, 1877 deletions(-) delete mode 100644 board/exbitgen/Makefile delete mode 100644 board/exbitgen/config.mk delete mode 100644 board/exbitgen/exbitgen.c delete mode 100644 board/exbitgen/exbitgen.h delete mode 100644 board/exbitgen/flash.c delete mode 100644 board/exbitgen/init.S diff --git a/MAINTAINERS b/MAINTAINERS index e8ba4bc134..fe63a9f8d9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -134,8 +134,6 @@ Wolfgang Denk PCIPPC2 MPC750 PCIPPC6 MPC750 - EXBITGEN PPC405GP - Jon Diekema sbc8260 MPC8260 diff --git a/MAKEALL b/MAKEALL index 15e93cf273..7047e466d5 100755 --- a/MAKEALL +++ b/MAKEALL @@ -213,7 +213,6 @@ LIST_4xx=" \ DU440 \ ebony \ ERIC \ - EXBITGEN \ fx12mm \ G2000 \ gdppc440etx \ diff --git a/Makefile b/Makefile index 69b963f2b8..62fa1dfd7c 100644 --- a/Makefile +++ b/Makefile @@ -1336,9 +1336,6 @@ ebony_config: unconfig ERIC_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric -EXBITGEN_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen - fx12mm_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic @mkdir -p $(obj)include $(obj)board/avnet/fx12mm diff --git a/board/exbitgen/Makefile b/board/exbitgen/Makefile deleted file mode 100644 index 4f752a86b4..0000000000 --- a/board/exbitgen/Makefile +++ /dev/null @@ -1,52 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS = $(BOARD).o flash.o - -SOBJS = init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $^ - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/exbitgen/config.mk b/board/exbitgen/config.mk deleted file mode 100644 index 42ea0c6d78..0000000000 --- a/board/exbitgen/config.mk +++ /dev/null @@ -1,33 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# ExbitGen board -# - -LDFLAGS += $(LINKER_UNDEFS) - -TEXT_BASE := 0xFFF80000 -#TEXT_BASE := 0x00100000 - -PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS) diff --git a/board/exbitgen/exbitgen.c b/board/exbitgen/exbitgen.c deleted file mode 100644 index 50d9748c71..0000000000 --- a/board/exbitgen/exbitgen.c +++ /dev/null @@ -1,126 +0,0 @@ -#include -#include -#include -#include "exbitgen.h" - -void sdram_init(void); - -/* ************************************************************************ */ -int board_early_init_f (void) -/* ------------------------------------------------------------------------ -- - * Purpose : - * Remarks : - * Restrictions: - * See also : - * Example : - * ************************************************************************ */ -{ - unsigned long i; - - /*-------------------------------------------------------------------------+ - | Interrupt controller setup for the Walnut board. - | Note: IRQ 0-15 405GP internally generated; active high; level sensitive - | IRQ 16 405GP internally generated; active low; level sensitive - | IRQ 17-24 RESERVED - | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive - | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive - | IRQ 27 (EXT IRQ 2) Not Used - | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive - | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive - | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive - | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive - | Note for Walnut board: - | An interrupt taken for the FPGA (IRQ 25) indicates that either - | the Mouse, Keyboard, IRDA, or External Expansion caused the - | interrupt. The FPGA must be read to determine which device - | caused the interrupt. The default setting of the FPGA clears - | - +-------------------------------------------------------------------------*/ - - mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr (UIC0ER, 0x00000000); /* disable all ints */ - mtdcr (UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */ - mtdcr (UIC0PR, 0xFFFFFF90); /* set int polarities */ - mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - /* Perform reset of PHY connected to PPC via register in CPLD */ - out8 (PHY_CTRL_ADDR, 0x2e); /* activate nRESET,FDX,F100,ANEN, enable output */ - for (i = 0; i < 10000000; i++) { - ; - } - out8 (PHY_CTRL_ADDR, 0x2f); /* deactivate nRESET */ - - return 0; -} - - -/* ************************************************************************ */ -int checkboard (void) -/* ------------------------------------------------------------------------ -- - * Purpose : - * Remarks : - * Restrictions: - * See also : - * Example : - * ************************************************************************ */ -{ - printf ("Exbit H/W id: %d\n", in8 (HW_ID_ADDR)); - return (0); -} - -/* ************************************************************************ */ -phys_size_t initdram (int board_type) -/* ------------------------------------------------------------------------ -- - * Purpose : Determines size of mounted DRAM. - * Remarks : Size is determined by reading SDRAM configuration registers as - * set up by sdram_init. - * Restrictions: - * See also : - * Example : - * ************************************************************************ */ -{ - ulong tot_size; - ulong bank_size; - ulong tmp; - - /* - * ToDo: Move the asm init routine sdram_init() to this C file, - * or even better use some common ppc4xx code available - * in cpu/ppc4xx - */ - sdram_init(); - - tot_size = 0; - - mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); - tmp = mfdcr (SDRAM0_CFGDATA); - if (tmp & 0x00000001) { - bank_size = 0x00400000 << ((tmp >> 17) & 0x7); - tot_size += bank_size; - } - - mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); - tmp = mfdcr (SDRAM0_CFGDATA); - if (tmp & 0x00000001) { - bank_size = 0x00400000 << ((tmp >> 17) & 0x7); - tot_size += bank_size; - } - - mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); - tmp = mfdcr (SDRAM0_CFGDATA); - if (tmp & 0x00000001) { - bank_size = 0x00400000 << ((tmp >> 17) & 0x7); - tot_size += bank_size; - } - - mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); - tmp = mfdcr (SDRAM0_CFGDATA); - if (tmp & 0x00000001) { - bank_size = 0x00400000 << ((tmp >> 17) & 0x7); - tot_size += bank_size; - } - - return tot_size; -} diff --git a/board/exbitgen/exbitgen.h b/board/exbitgen/exbitgen.h deleted file mode 100644 index dceaf6dbc0..0000000000 --- a/board/exbitgen/exbitgen.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#define GPIO_CPU_LED GPIO_3 - - -#define CPLD_BASE 0x10000000 /* t.b.m. */ -#define DEBUG_LEDS_ADDR CPLD_BASE + 0x01 -#define HW_ID_ADDR CPLD_BASE + 0x02 -#define DIP_SWITCH_ADDR CPLD_BASE + 0x04 -#define PHY_CTRL_ADDR CPLD_BASE + 0x05 -#define SPI_OUT_ADDR CPLD_BASE + 0x07 -#define SPI_IN_ADDR CPLD_BASE + 0x08 -#define MDIO_OUT_ADDR CPLD_BASE + 0x09 -#define MDIO_IN_ADDR CPLD_BASE + 0x0A -#define MISC_OUT_ADDR CPLD_BASE + 0x0B - -/* Addresses used on I2C bus */ -#define LM75_CHIP_ADDR 0x9C -#define LM75_CPU_ADDR 0x9E -#define SDRAM_SPD_ADDR 0xA0 - -#define SDRAM_SPD_WRITE_ADDRESS (SDRAM_SPD_ADDR) -#define SDRAM_SPD_READ_ADDRESS (SDRAM_SPD_ADDR+1) - -#ifndef FALSE -#define FALSE 0 -#endif - -#ifndef TRUE -#define TRUE 1 -#endif diff --git a/board/exbitgen/flash.c b/board/exbitgen/flash.c deleted file mode 100644 index cd45cb697d..0000000000 --- a/board/exbitgen/flash.c +++ /dev/null @@ -1,597 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com - */ - -#include -#include -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); - -#ifdef MEIGSBOARD_ONBOARD_FLASH /* onboard = 2MB */ -# ifdef CONFIG_EXBITGEN -# define FLASH_WORD_SIZE unsigned long -# endif -#else /* Meigsboard socket flash = 512KB */ -# ifdef CONFIG_EXBITGEN -# define FLASH_WORD_SIZE unsigned char -# endif -#endif - -#ifdef CONFIG_EXBITGEN -#define ADDR0 0x5555 -#define ADDR1 0x2aaa -#define FLASH_WORD_SIZE unsigned char -#endif - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long bank_size; - unsigned long tot_size; - unsigned long bank_addr; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].size = 0; - } - - tot_size = 0; - - /* Detect Boot Flash */ - bank_addr = CONFIG_SYS_FLASH0_BASE; - bank_size = flash_get_size((vu_long *)bank_addr, &flash_info[0]); - if (bank_size > 0) { - (void)flash_protect(FLAG_PROTECT_CLEAR, - bank_addr, - bank_addr + bank_size - 1, - &flash_info[0]); - } - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Boot Flash Bank\n"); - } - flash_info[0].size = bank_size; - tot_size += bank_size; - - /* Detect Application Flash */ - bank_addr = CONFIG_SYS_FLASH1_BASE; - for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - bank_size = flash_get_size((vu_long *)bank_addr, &flash_info[i]); - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - break; - } - if (bank_size > 0) { - (void)flash_protect(FLAG_PROTECT_CLEAR, - bank_addr, - bank_addr + bank_size - 1, - &flash_info[i]); - } - flash_info[i].size = bank_size; - tot_size += bank_size; - bank_addr += bank_size; - } - if (flash_info[1].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Application Flash Bank\n"); - } - - /* Protect monitor and environment sectors */ -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[0]); -#if 0xfffffffc >= CONFIG_SYS_FLASH0_BASE -#if 0xfffffffc <= CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_FLASH0_SIZE - 1 - flash_protect(FLAG_PROTECT_SET, - 0xfffffffc, 0xffffffff, - &flash_info[0]); -#endif -#endif -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); -#endif - - return tot_size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_SST: printf ("SST "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n"); - break; - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - case FLASH_AMDLV033C: printf ("AM29LV033C (32 Mbit, uniform sector size)\n"); - break; - case FLASH_AMDLV065D: printf ("AM29LV065D (64 Mbit, uniform sector size)\n"); - break; - case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); - break; - case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); - break; - case FLASH_SST040: printf ("SST39LF/VF040 (4 Mbit, uniform sector size)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - FLASH_WORD_SIZE value; - ulong base = (ulong)addr; - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr; - - /* Write auto select command: read Manufacturer ID */ - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090; - - value = addr2[0]; - - switch (value) { - case (FLASH_WORD_SIZE)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (FLASH_WORD_SIZE)FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (FLASH_WORD_SIZE)SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr2[1]; /* device ID */ - - switch (value) { - case (FLASH_WORD_SIZE)AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x0080000; /* => 512 ko */ - break; - case (FLASH_WORD_SIZE)AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_LV033C: - info->flash_id += FLASH_AMDLV033C; - info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_LV065D: - info->flash_id += FLASH_AMDLV065D; - info->sector_count = 128; - info->size = 0x00800000; - break; /* => 8 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (FLASH_WORD_SIZE)AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (FLASH_WORD_SIZE)SST_ID_xF800A: - info->flash_id += FLASH_SST800A; - info->sector_count = 16; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (FLASH_WORD_SIZE)SST_ID_xF160A: - info->flash_id += FLASH_SST160A; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ - case (FLASH_WORD_SIZE)SST_ID_xF040: - info->flash_id += FLASH_SST040; - info->sector_count = 128; - info->size = 0x00080000; - break; /* => 512KB */ - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - (info->flash_id == FLASH_AM040) || - (info->flash_id == FLASH_AMDLV033C) || - (info->flash_id == FLASH_AMDLV065D)) { - ulong sectsize = info->size / info->sector_count; - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * sectsize); - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - - addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]); - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* switch to the read mode */ - if (info->flash_id != FLASH_UNKNOWN) { - addr2 = (FLASH_WORD_SIZE *)info->start[0]; - *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ - } - - return (info->size); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); - volatile FLASH_WORD_SIZE *addr2; - int flag, prot, sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - last = start; - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (FLASH_WORD_SIZE *)(info->start[sect]); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[0] = (FLASH_WORD_SIZE)0x00300030; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - while ((addr2[0] & 0x00800080) != - (FLASH_WORD_SIZE) 0x00800080) { - if ((now=get_timer(start)) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - addr[0] = (FLASH_WORD_SIZE)0x00F000F0; - return 1; - } - - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - - addr[0] = (FLASH_WORD_SIZE)0x00F000F0; - } - } - - printf (" done\n"); - - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]); - volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data; - ulong start; - int flag; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((volatile ulong *)dest) & data) != data) { - printf("dest = %08lx, *dest = %08lx, data = %08lx\n", - dest, *(volatile ulong *)dest, data); - return 2; - } - - for (i=0; i < 4/sizeof(FLASH_WORD_SIZE); i++) { - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0; - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i] & 0x00800080) != (data2[i] & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - addr2[0] = (FLASH_WORD_SIZE)0x00F000F0; - return (1); - } - } - } - - addr2[0] = (FLASH_WORD_SIZE)0x00F000F0; - - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/exbitgen/init.S b/board/exbitgen/init.S deleted file mode 100644 index 721aaac3e7..0000000000 --- a/board/exbitgen/init.S +++ /dev/null @@ -1,1011 +0,0 @@ -/*----------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of - * the GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *----------------------------------------------------------------------- - */ - -#include -#include -#include "config.h" - -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ -#define FPGA_BRDC 0xF0300004 - -#include -#include - -#include -#include - -#include "exbitgen.h" - -/* IIC declarations (This is an extract from 405gp_i2c.h, which also contains some */ -/* c-code declarations and consequently can't be included here). */ -/* (Possibly to be solved somehow else). */ -/*--------------------------------------------------------------------- */ -#define I2C_REGISTERS_BASE_ADDRESS 0xEF600500 -#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF) -#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF) -#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR) -#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR) -#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL) -#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL) -#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS) -#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS) -#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR) -#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR) -#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IIC0_CLKDIV) -#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK) -#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT) -#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS) -#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL) - -/* MDCNTL Register Bit definition */ -#define IIC_MDCNTL_HSCL 0x01 -#define IIC_MDCNTL_EUBS 0x02 -#define IIC_MDCNTL_FMDB 0x40 -#define IIC_MDCNTL_FSDB 0x80 - -/* CNTL Register Bit definition */ -#define IIC_CNTL_PT 0x01 -#define IIC_CNTL_READ 0x02 -#define IIC_CNTL_CHT 0x04 - -/* STS Register Bit definition */ -#define IIC_STS_PT 0X01 -#define IIC_STS_ERR 0X04 -#define IIC_STS_MDBS 0X20 - -/* EXTSTS Register Bit definition */ -#define IIC_EXTSTS_XFRA 0X01 -#define IIC_EXTSTS_ICT 0X02 -#define IIC_EXTSTS_LA 0X04 - -/* LED codes used for inditing progress and errors during read of DIMM SPD. */ -/*--------------------------------------------------------------------- */ -#define LED_SDRAM_CODE_1 0xef -#define LED_SDRAM_CODE_2 0xee -#define LED_SDRAM_CODE_3 0xed -#define LED_SDRAM_CODE_4 0xec -#define LED_SDRAM_CODE_5 0xeb -#define LED_SDRAM_CODE_6 0xea -#define LED_SDRAM_CODE_7 0xe9 -#define LED_SDRAM_CODE_8 0xe8 -#define LED_SDRAM_CODE_9 0xe7 -#define LED_SDRAM_CODE_10 0xe6 -#define LED_SDRAM_CODE_11 0xe5 -#define LED_SDRAM_CODE_12 0xe4 -#define LED_SDRAM_CODE_13 0xe3 -#define LED_SDRAM_CODE_14 0xe2 -#define LED_SDRAM_CODE_15 0xe1 -#define LED_SDRAM_CODE_16 0xe0 - - -#define TIMEBASE_10PS (1000000000 / CONFIG_SYS_CLK_FREQ) * 100 - -#define FLASH_8bit_AP 0x9B015480 -#define FLASH_8bit_CR 0xFFF18000 /* 1MB(min), 8bit, R/W */ - -#define FLASH_32bit_AP 0x9B015480 -#define FLASH_32bit_CR 0xFFE3C000 /* 2MB, 32bit, R/W */ - - -#define WDCR_EBC(reg,val) addi r4,0,reg;\ - mtdcr EBC0_CFGADDR,r4;\ - addis r4,0,val@h;\ - ori r4,r4,val@l;\ - mtdcr EBC0_CFGDATA,r4 - -/*--------------------------------------------------------------------- - * Function: ext_bus_cntlr_init - * Description: Initializes the External Bus Controller for the external - * peripherals. IMPORTANT: For pass1 this code must run from - * cache since you can not reliably change a peripheral banks - * timing register (pbxap) while running code from that bank. - * For ex., since we are running from ROM on bank 0, we can NOT - * execute the code that modifies bank 0 timings from ROM, so - * we run it from cache. - * Bank 0 - Boot flash - * Bank 1-4 - application flash - * Bank 5 - CPLD - * Bank 6 - not used - * Bank 7 - Heathrow chip - *--------------------------------------------------------------------- - */ - .globl ext_bus_cntlr_init -ext_bus_cntlr_init: - mflr r4 /* save link register */ - bl ..getAddr -..getAddr: - mflr r3 /* get address of ..getAddr */ - mtlr r4 /* restore link register */ - addi r4,0,14 /* set ctr to 10; used to prefetch */ - mtctr r4 /* 10 cache lines to fit this function */ - /* in cache (gives us 8x10=80 instrctns) */ -..ebcloop: - icbt r0,r3 /* prefetch cache line for addr in r3 */ - addi r3,r3,32 /* move to next cache line */ - bdnz ..ebcloop /* continue for 10 cache lines */ - - mflr r31 /* save link register */ - - /*----------------------------------------------------------- - * Delay to ensure all accesses to ROM are complete before changing - * bank 0 timings. 200usec should be enough. - * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles - *----------------------------------------------------------- - */ - - addis r3,0,0x0 - ori r3,r3,0xA000 /* ensure 200usec have passed since reset */ - mtctr r3 -..spinlp: - bdnz ..spinlp /* spin loop */ - - /*--------------------------------------------------------------- - * Memory Bank 0 (Boot Flash) initialization - *--------------------------------------------------------------- - */ - WDCR_EBC(PB1AP, FLASH_32bit_AP) - WDCR_EBC(PB0CR, 0xffe38000) -/*pnc WDCR_EBC(PB0CR, FLASH_32bit_CR) */ - - /*--------------------------------------------------------------- - * Memory Bank 5 (CPLD) initialization - *--------------------------------------------------------------- - */ - WDCR_EBC(PB5AP, 0x01010040) -/*jsa recommendation: WDCR_EBC(PB5AP, 0x00010040) */ - WDCR_EBC(PB5CR, 0x10038000) - - /*--------------------------------------------------------------- */ - /* Memory Bank 6 (not used) initialization */ - /*--------------------------------------------------------------- */ - WDCR_EBC(PB6CR, 0x00000000) - - /* Read HW ID to determine whether old H2 board or new generic CPU board */ - addis r3, 0, HW_ID_ADDR@h - ori r3, r3, HW_ID_ADDR@l - lbz r3,0x0000(r3) - cmpi 0, r3, 1 /* if (HW_ID==1) */ - beq setup_h2evalboard /* then jump */ - cmpi 0, r3, 2 /* if (HW_ID==2) */ - beq setup_genieboard /* then jump */ - cmpi 0, r3, 3 /* if (HW_ID==3) */ - beq setup_genieboard /* then jump */ - -setup_genieboard: - /*--------------------------------------------------------------- */ - /* Memory Bank 1 (Application Flash) initialization for generic CPU board */ - /*--------------------------------------------------------------- */ -/* WDCR_EBC(PB1AP, 0x7b015480) /###* T.B.M. */ -/* WDCR_EBC(PB1AP, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(PB1AP, 0x9b015480) /* hlb-20020207: burst 8 bit 6 cycles */ - -/* WDCR_EBC(PB1CR, 0x20098000) /###* 16 MB */ - WDCR_EBC(PB1CR, 0x200B8000) /* 32 MB */ - - /*--------------------------------------------------------------- */ - /* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */ - /*--------------------------------------------------------------- */ - WDCR_EBC(PB4AP, 0x01010000) /* */ - WDCR_EBC(PB4CR, 0x1021c000) /* */ - - /*--------------------------------------------------------------- */ - /* Memory Bank 7 (Heathrow chip on Reference board) initialization */ - /*--------------------------------------------------------------- */ - WDCR_EBC(PB7AP, 0x200ffe80) /* No Ready, many wait states (let reflections die out) */ - WDCR_EBC(PB7CR, 0X4001A000) - - bl setup_continue - - -setup_h2evalboard: - /*--------------------------------------------------------------- */ - /* Memory Bank 1 (Application Flash) initialization */ - /*--------------------------------------------------------------- */ - WDCR_EBC(PB1AP, 0x7b015480) /* T.B.M. */ -/*3010 WDCR_EBC(PB1AP, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(PB1CR, 0x20058000) - - /*--------------------------------------------------------------- */ - /* Memory Bank 2 (Application Flash) initialization */ - /*--------------------------------------------------------------- */ - WDCR_EBC(PB2AP, 0x7b015480) /* T.B.M. */ -/*3010 WDCR_EBC(PB2AP, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(PB2CR, 0x20458000) - - /*--------------------------------------------------------------- */ - /* Memory Bank 3 (Application Flash) initialization */ - /*--------------------------------------------------------------- */ - WDCR_EBC(PB3AP, 0x7b015480) /* T.B.M. */ -/*3010 WDCR_EBC(PB3AP, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(PB3CR, 0x20858000) - - /*--------------------------------------------------------------- */ - /* Memory Bank 4 (Application Flash) initialization */ - /*--------------------------------------------------------------- */ - WDCR_EBC(PB4AP, 0x7b015480) /* T.B.M. */ -/*3010 WDCR_EBC(PB4AP, 0x7F8FFE80) /###* T.B.M. */ - WDCR_EBC(PB4CR, 0x20C58000) - - /*--------------------------------------------------------------- */ - /* Memory Bank 7 (Heathrow chip) initialization */ - /*--------------------------------------------------------------- */ - WDCR_EBC(PB7AP, 0x02000280) /* No Ready, 4 wait states */ - WDCR_EBC(PB7CR, 0X4001A000) - -setup_continue: - - - mtlr r31 /* restore lr */ - nop /* pass2 DCR errata #8 */ - blr - -/*--------------------------------------------------------------------- */ -/* Function: sdram_init */ -/* Description: Configures SDRAM memory banks. */ -/*--------------------------------------------------------------------- */ - .globl sdram_init - -sdram_init: -#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE - blr -#else - mflr r31 - - /* output SDRAM code on LEDs */ - addi r4, 0, LED_SDRAM_CODE_1 - addis r5, 0, 0x1000 - ori r5, r5, 0x0001 - stb r4,0(r5) - eieio - - /* Read contents of spd */ - /*--------------------- */ - bl read_spd - - /*----------------------------------------------------------- */ - /* */ - /* */ - /* Update SDRAM timing register */ - /* */ - /* */ - /*----------------------------------------------------------- */ - - /* Read PLL feedback divider and calculate clock period of local bus in */ - /* granularity of 10 ps. Save clock period in r30 */ - /*-------------------------------------------------------------- */ - mfdcr r4, CPC0_PLLMR - addi r9, 0, 25 - srw r4, r4, r9 - andi. r4, r4, 0x07 - addis r5, 0, TIMEBASE_10PS@h - ori r5, r5, TIMEBASE_10PS@l - divwu r30, r5, r4 - - /* Determine CASL */ - /*--------------- */ - bl find_casl /* Returns CASL in r3 */ - - /* Calc trp_clocks = (trp * 100 + (clk - 1)) / clk */ - /* (trp read from byte 27 in granularity of 1 ns) */ - /*------------------------------------------------ */ - mulli r16, r16, 100 - add r16, r16, r30 - addi r6, 0, 1 - subf r16, r6, r16 - divwu r16, r16, r30 - - /* Calc trcd_clocks = (trcd * 100 + (clk - 1) ) / clk */ - /* (trcd read from byte 29 in granularity of 1 ns) */ - /*--------------------------------------------------- */ - mulli r17, r17, 100 - add r17, r17, r30 - addi r6, 0, 1 - subf r17, r6, r17 - divwu r17, r17, r30 - - /* Calc tras_clocks = (tras * 100 + (clk - 1) ) / clk */ - /* (tras read from byte 30 in granularity of 1 ns) */ - /*--------------------------------------------------- */ - mulli r18, r18, 100 - add r18, r18, r30 - addi r6, 0, 1 - subf r18, r6, r18 - divwu r18, r18, r30 - - /* Calc trc_clocks = trp_clocks + tras_clocks */ - /*------------------------------------------- */ - add r18, r18, r16 - - /* CASL value */ - /*----------- */ - addi r9, 0, 23 - slw r4, r3, r9 - - /* PTA = trp_clocks - 1 */ - /*--------------------- */ - addi r6, 0, 1 - subf r5, r6, r16 - addi r9, 0, 18 - slw r5, r5, r9 - or r4, r4, r5 - - /* CTP = trc_clocks - trp_clocks - trcd_clocks - 1 */ - /*------------------------------------------------ */ - addi r5, r18, 0 - subf r5, r16, r5 - subf r5, r17, r5 - addi r6, 0, 1 - subf r5, r6, r5 - addi r9, 0, 16 - slw r5, r5, r9 - or r4, r4, r5 - - /* LDF = 1 */ - /*-------- */ - ori r4, r4, 0x4000 - - /* RFTA = trc_clocks - 4 */ - /*---------------------- */ - addi r6, 0, 4 - subf r5, r6, r18 - addi r9, 0, 2 - slw r5, r5, r9 - or r4, r4, r5 - - /* RCD = trcd_clocks - 1 */ - /*---------------------- */ - addi r6, 0, 1 - subf r5, r6, r17 - or r4, r4, r5 - - /*----------------------------------------------------------- */ - /* Set SDTR1 */ - /*----------------------------------------------------------- */ - addi r5,0,SDRAM0_TR - mtdcr SDRAM0_CFGADDR,r5 - mtdcr SDRAM0_CFGDATA,r4 - - /*----------------------------------------------------------- */ - /* */ - /* */ - /* Update memory bank 0-3 configuration registers */ - /* */ - /* */ - /*----------------------------------------------------------- */ - - /* Build contents of configuration register for bank 0 into r6 */ - /*------------------------------------------------------------ */ - bl find_mode /* returns addressing mode in r3 */ - addi r29, r3, 0 /* save mode temporarily in r29 */ - bl find_size_code /* returns size code in r3 */ - addi r9, 0, 17 /* bit offset of size code in configuration register */ - slw r3, r3, r9 /* */ - addi r9, 0, 13 /* bit offset of addressing mode in configuration register */ - slw r29, r29, r9 /* */ - or r3, r29, r3 /* merge size code and addressing mode */ - ori r6, r3, CONFIG_SYS_SDRAM_BASE + 1 /* insert base address and enable bank */ - - /* Calculate banksize r15 = (density << 22) / 2 */ - /*--------------------------------------------- */ - addi r9, 0, 21 - slw r15, r15, r9 - - /* Set SDRAM bank 0 register and adjust r6 for next bank */ - /*------------------------------------------------------ */ - addi r7,0,SDRAM0_B0CR - mtdcr SDRAM0_CFGADDR,r7 - mtdcr SDRAM0_CFGDATA,r6 - - add r6, r6, r15 /* add bank size to base address for next bank */ - - /* If two rows/banks then set SDRAM bank 1 register and adjust r6 for next bank */ - /*---------------------------------------------------------------------------- */ - cmpi 0, r12, 2 - bne b1skip - - addi r7,0,SDRAM0_B1CR - mtdcr SDRAM0_CFGADDR,r7 - mtdcr SDRAM0_CFGDATA,r6 - - add r6, r6, r15 /* add bank size to base address for next bank */ - - /* Set SDRAM bank 2 register and adjust r6 for next bank */ - /*------------------------------------------------------ */ -b1skip: addi r7,0,SDRAM0_B2CR - mtdcr SDRAM0_CFGADDR,r7 - mtdcr SDRAM0_CFGDATA,r6 - - add r6, r6, r15 /* add bank size to base address for next bank */ - - /* If two rows/banks then set SDRAM bank 3 register */ - /*------------------------------------------------ */ - cmpi 0, r12, 2 - bne b3skip - - addi r7,0,SDRAM0_B3CR - mtdcr SDRAM0_CFGADDR,r7 - mtdcr SDRAM0_CFGDATA,r6 -b3skip: - - /*----------------------------------------------------------- */ - /* Set RTR */ - /*----------------------------------------------------------- */ - cmpi 0, r30, 1600 - bge rtr_1 - addis r7, 0, 0x05F0 /* RTR value for 100Mhz */ - bl rtr_2 -rtr_1: addis r7, 0, 0x03F8 -rtr_2: addi r4,0,SDRAM0_RTR - mtdcr SDRAM0_CFGADDR,r4 - mtdcr SDRAM0_CFGDATA,r7 - - /*----------------------------------------------------------- */ - /* Delay to ensure 200usec have elapsed since reset. Assume worst */ - /* case that the core is running 200Mhz: */ - /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */ - /*----------------------------------------------------------- */ - addis r3,0,0x0000 - ori r3,r3,0xA000 /* ensure 200usec have passed since reset */ - mtctr r3 -..spinlp2: - bdnz ..spinlp2 /* spin loop */ - - /*----------------------------------------------------------- */ - /* Set memory controller options reg, MCOPT1. */ - /* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */ - /* read/prefetch. */ - /*----------------------------------------------------------- */ - addi r4,0,SDRAM0_CFG - mtdcr SDRAM0_CFGADDR,r4 - addis r4,0,0x80C0 /* set DC_EN=1 */ - ori r4,r4,0x0000 - mtdcr SDRAM0_CFGDATA,r4 - - - /*----------------------------------------------------------- */ - /* Delay to ensure 10msec have elapsed since reset. This is */ - /* required for the MPC952 to stabalize. Assume worst */ - /* case that the core is running 200Mhz: */ - /* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */ - /* This delay should occur before accessing SDRAM. */ - /*----------------------------------------------------------- */ - addis r3,0,0x001E - ori r3,r3,0x8480 /* ensure 10msec have passed since reset */ - mtctr r3 -..spinlp3: - bdnz ..spinlp3 /* spin loop */ - - /* output SDRAM code on LEDs */ - addi r4, 0, LED_SDRAM_CODE_16 - addis r5, 0, 0x1000 - ori r5, r5, 0x0001 - stb r4,0(r5) - eieio - - mtlr r31 /* restore lr */ - blr - -/*--------------------------------------------------------------------- */ -/* Function: read_spd */ -/* Description: Reads contents of SPD and saves parameters to be used for */ -/* configuration in dedicated registers (see code below). */ -/*--------------------------------------------------------------------- */ - -#define WRITE_I2C(reg,val) \ - addi r3,0,val;\ - addis r4, 0, 0xef60;\ - ori r4, r4, 0x0500 + reg;\ - stb r3, 0(r4);\ - eieio - -#define READ_I2C(reg) \ - addis r3, 0, 0xef60;\ - ori r3, r3, 0x0500 + reg;\ - lbz r3, 0x0000(r3);\ - eieio - -read_spd: - - mflr r5 - - /* Initialize i2c */ - /*--------------- */ - WRITE_I2C(IICLMADR, 0x00) /* clear lo master address */ - WRITE_I2C(IICHMADR, 0x00) /* clear hi master address */ - WRITE_I2C(IICLSADR, 0x00) /* clear lo slave address */ - WRITE_I2C(IICHSADR, 0x00) /* clear hi slave address */ - WRITE_I2C(IICSTS, 0x08) /* update status register */ - WRITE_I2C(IICEXTSTS, 0x8f) - WRITE_I2C(IIC0_CLKDIV, 0x05) - WRITE_I2C(IICINTRMSK, 0x00) /* no interrupts */ - WRITE_I2C(IICXFRCNT, 0x00) /* clear transfer count */ - WRITE_I2C(IICXTCNTLSS, 0xf0) /* clear extended control & stat */ - WRITE_I2C(IICMDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB) /* mode control */ - READ_I2C(IICMDCNTL) - ori r3, r3, IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL - WRITE_I2C(IICMDCNTL, r3) /* mode control */ - WRITE_I2C(IICCNTL, 0x00) /* clear control reg */ - - /* Wait until initialization completed */ - /*------------------------------------ */ - bl wait_i2c_transfer_done - - WRITE_I2C(IICHMADR, 0x00) /* 7-bit addressing */ - WRITE_I2C(IICLMADR, SDRAM_SPD_WRITE_ADDRESS) - - /* Write 0 into buffer(start address) */ - /*----------------------------------- */ - WRITE_I2C(IICMDBUF, 0x00); - - /* Wait a little */ - /*-------------- */ - addis r3,0,0x0000 - ori r3,r3,0xA000 - mtctr r3 -in02: bdnz in02 - - /* Issue write command */ - /*-------------------- */ - WRITE_I2C(IICCNTL, IIC_CNTL_PT) - bl wait_i2c_transfer_done - - /* Read 128 bytes */ - /*--------------- */ - addi r7, 0, 0 /* byte counter in r7 */ - addi r8, 0, 0 /* checksum in r8 */ -rdlp: - /* issue read command */ - /*------------------- */ - cmpi 0, r7, 127 - blt rd01 - WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_PT) - bl rd02 -rd01: WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_CHT | IIC_CNTL_PT) -rd02: bl wait_i2c_transfer_done - - /* Fetch byte from buffer */ - /*----------------------- */ - READ_I2C(IICMDBUF) - - /* Retrieve parameters that are going to be used during configuration. */ - /* Save them in dedicated registers. */ - /*------------------------------------------------------------ */ - cmpi 0, r7, 3 /* Save byte 3 in r10 */ - bne rd10 - addi r10, r3, 0 -rd10: cmpi 0, r7, 4 /* Save byte 4 in r11 */ - bne rd11 - addi r11, r3, 0 -rd11: cmpi 0, r7, 5 /* Save byte 5 in r12 */ - bne rd12 - addi r12, r3, 0 -rd12: cmpi 0, r7, 17 /* Save byte 17 in r13 */ - bne rd13 - addi r13, r3, 0 -rd13: cmpi 0, r7, 18 /* Save byte 18 in r14 */ - bne rd14 - addi r14, r3, 0 -rd14: cmpi 0, r7, 31 /* Save byte 31 in r15 */ - bne rd15 - addi r15, r3, 0 -rd15: cmpi 0, r7, 27 /* Save byte 27 in r16 */ - bne rd16 - addi r16, r3, 0 -rd16: cmpi 0, r7, 29 /* Save byte 29 in r17 */ - bne rd17 - addi r17, r3, 0 -rd17: cmpi 0, r7, 30 /* Save byte 30 in r18 */ - bne rd18 - addi r18, r3, 0 -rd18: cmpi 0, r7, 9 /* Save byte 9 in r19 */ - bne rd19 - addi r19, r3, 0 -rd19: cmpi 0, r7, 23 /* Save byte 23 in r20 */ - bne rd20 - addi r20, r3, 0 -rd20: cmpi 0, r7, 25 /* Save byte 25 in r21 */ - bne rd21 - addi r21, r3, 0 -rd21: - - /* Calculate checksum of the first 63 bytes */ - /*----------------------------------------- */ - cmpi 0, r7, 63 - bgt rd31 - beq rd30 - add r8, r8, r3 - bl rd31 - - /* Verify checksum at byte 63 */ - /*--------------------------- */ -rd30: andi. r8, r8, 0xff /* use only 8 bits */ - cmp 0, r8, r3 - beq rd31 - addi r4, 0, LED_SDRAM_CODE_8 - addis r5, 0, 0x1000 - ori r5, r5, 0x0001 - stb r4,0(r5) - eieio -rderr: bl rderr - -rd31: - - /* Increment byte counter and check whether all bytes have been read. */ - /*------------------------------------------------------------------- */ - addi r7, r7, 1 - cmpi 0, r7, 127 - bgt rd05 - bl rdlp -rd05: - mtlr r5 /* restore lr */ - blr - -wait_i2c_transfer_done: - mflr r6 -wt01: READ_I2C(IICSTS) - andi. r4, r3, IIC_STS_PT - cmpi 0, r4, IIC_STS_PT - beq wt01 - mtlr r6 /* restore lr */ - blr - -/*--------------------------------------------------------------------- */ -/* Function: find_mode */ -/* Description: Determines addressing mode to be used dependent on */ -/* number of rows (r10 = byte 3 from SPD), number of columns (r11 = */ -/* byte 4 from SPD) and number of banks (r13 = byte 17 from SPD). */ -/* mode is returned in r3. */ -/* (It would be nicer having a table, pnc). */ -/*--------------------------------------------------------------------- */ -find_mode: - - mflr r5 - - cmpi 0, r10, 11 - bne fm01 - cmpi 0, r11, 9 - bne fm01 - cmpi 0, r13, 2 - bne fm01 - addi r3, 0, 1 - bl fmfound - -fm01: cmpi 0, r10, 11 - bne fm02 - cmpi 0, r11, 10 - bne fm02 - cmpi 0, r13, 2 - bne fm02 - addi r3, 0, 1 - bl fmfound - -fm02: cmpi 0, r10, 12 - bne fm03 - cmpi 0, r11, 9 - bne fm03 - cmpi 0, r13, 4 - bne fm03 - addi r3, 0, 2 - bl fmfound - -fm03: cmpi 0, r10, 12 - bne fm04 - cmpi 0, r11, 10 - bne fm04 - cmpi 0, r13, 4 - bne fm04 - addi r3, 0, 2 - bl fmfound - -fm04: cmpi 0, r10, 13 - bne fm05 - cmpi 0, r11, 9 - bne fm05 - cmpi 0, r13, 4 - bne fm05 - addi r3, 0, 3 - bl fmfound - -fm05: cmpi 0, r10, 13 - bne fm06 - cmpi 0, r11, 10 - bne fm06 - cmpi 0, r13, 4 - bne fm06 - addi r3, 0, 3 - bl fmfound - -fm06: cmpi 0, r10, 13 - bne fm07 - cmpi 0, r11, 11 - bne fm07 - cmpi 0, r13, 4 - bne fm07 - addi r3, 0, 3 - bl fmfound - -fm07: cmpi 0, r10, 12 - bne fm08 - cmpi 0, r11, 8 - bne fm08 - cmpi 0, r13, 2 - bne fm08 - addi r3, 0, 4 - bl fmfound - -fm08: cmpi 0, r10, 12 - bne fm09 - cmpi 0, r11, 8 - bne fm09 - cmpi 0, r13, 4 - bne fm09 - addi r3, 0, 4 - bl fmfound - -fm09: cmpi 0, r10, 11 - bne fm10 - cmpi 0, r11, 8 - bne fm10 - cmpi 0, r13, 2 - bne fm10 - addi r3, 0, 5 - bl fmfound - -fm10: cmpi 0, r10, 11 - bne fm11 - cmpi 0, r11, 8 - bne fm11 - cmpi 0, r13, 4 - bne fm11 - addi r3, 0, 5 - bl fmfound - -fm11: cmpi 0, r10, 13 - bne fm12 - cmpi 0, r11, 8 - bne fm12 - cmpi 0, r13, 2 - bne fm12 - addi r3, 0, 6 - bl fmfound - -fm12: cmpi 0, r10, 13 - bne fm13 - cmpi 0, r11, 8 - bne fm13 - cmpi 0, r13, 4 - bne fm13 - addi r3, 0, 6 - bl fmfound - -fm13: cmpi 0, r10, 13 - bne fm14 - cmpi 0, r11, 9 - bne fm14 - cmpi 0, r13, 2 - bne fm14 - addi r3, 0, 7 - bl fmfound - -fm14: cmpi 0, r10, 13 - bne fm15 - cmpi 0, r11, 10 - bne fm15 - cmpi 0, r13, 2 - bne fm15 - addi r3, 0, 7 - bl fmfound - -fm15: - /* not found, error code to be issued on LEDs */ - addi r7, 0, LED_SDRAM_CODE_2 - addis r6, 0, 0x1000 - ori r6, r6, 0x0001 - stb r7,0(r6) - eieio -fmerr: bl fmerr - -fmfound:addi r6, 0, 1 - subf r3, r6, r3 - - mtlr r5 /* restore lr */ - blr - -/*--------------------------------------------------------------------- */ -/* Function: find_size_code */ -/* Description: Determines size code to be used in configuring SDRAM controller */ -/* dependent on density (r15 = byte 31 from SPD) */ -/*--------------------------------------------------------------------- */ -find_size_code: - - mflr r5 - - addi r3, r15, 0 /* density */ - addi r7, 0, 0 -fs01: andi. r6, r3, 0x01 - cmpi 0, r6, 1 - beq fs04 - - addi r7, r7, 1 - cmpi 0, r7, 7 - bge fs02 - addi r9, 0, 1 - srw r3, r3, r9 - bl fs01 - - /* not found, error code to be issued on LEDs */ -fs02: addi r4, 0, LED_SDRAM_CODE_3 - addis r8, 0, 0x1000 - ori r8, r8, 0x0001 - stb r4,0(r8) - eieio -fs03: bl fs03 - -fs04: addi r3, r7, 0 - cmpi 0, r3, 0 - beq fs05 - addi r6, 0, 1 - subf r3, r6, r3 -fs05: - mtlr r5 /* restore lr */ - blr - -/*--------------------------------------------------------------------- */ -/* Function: find_casl */ -/* Description: Determines CAS latency */ -/*--------------------------------------------------------------------- */ -find_casl: - - mflr r5 - - andi. r14, r14, 0x7f /* r14 holds supported CAS latencies */ - addi r3, 0, 0xff /* preset determined CASL */ - addi r4, 0, 6 /* Start at bit 6 of supported CAS latencies */ - addi r2, 0, 0 /* Start finding highest CAS latency */ - -fc01: srw r6, r14, r4 /* */ - andi. r6, r6, 0x01 /* */ - cmpi 0, r6, 1 /* Check bit for current latency */ - bne fc06 /* If not supported, go to next */ - - cmpi 0, r2, 2 /* Check if third-highest latency */ - bge fc04 /* If so, go calculate with another format */ - - cmpi 0, r2, 0 /* Check if highest latency */ - bgt fc02 /* */ - addi r7, r19, 0 /* SDRAM cycle time for highest CAS latenty */ - - bl fc03 -fc02: - addi r7, r20, 0 /* SDRAM cycle time for next-highest CAS latenty */ -fc03: - addi r8, r7, 0 - addi r9, 0, 4 - srw r7, r7, r9 - andi. r7, r7, 0x0f - mulli r7, r7, 100 - andi. r8, r8, 0x0f - mulli r8, r8, 10 - add r7, r7, r8 - cmp 0, r7, r30 - bgt fc05 - addi r3, r2, 0 - bl fc05 -fc04: - addi r7, r21, 0 /* SDRAM cycle time for third-highest CAS latenty */ - addi r8, r7, 0 - addi r9, 0, 2 - srw r7, r7, r9 - andi. r7, r7, 0x3f - mulli r7, r7, 100 - andi. r8, r8, 0x03 - mulli r8, r8, 25 - add r7, r7, r8 - - cmp 0, r7, r30 - bgt fc05 - addi r3, r2, 0 - -fc05: addi r2, r2, 1 /* next latency */ - cmpi 0, r2, 3 - bge fc07 -fc06: addi r6, 0, 1 - subf r4, r6, r4 - cmpi 0, r4, 0 - bne fc01 - -fc07: - - mtlr r5 /* restore lr */ - blr -#endif - - -/* Peripheral Bank 1 Access Parameters */ -/* 0 BME = 1 ; burstmode enabled */ -/* " 1:8" TWT=00110110 ;Transfer wait (details below) */ -/* 1:5 FWT=00110 ; first wait = 6 cycles */ -/* 6:8 BWT=110 ; burst wait = 6 cycles */ -/* 9:11 000 ; reserved */ -/* 12:13 CSN=00 ; chip select on timing = 0 */ -/* 14:15 OEN=01 ; output enable */ -/* 16:17 WBN=01 ; write byte enable on timing 1 cycle */ -/* 18:19 WBF=01 ; write byte enable off timing 1 cycle */ -/* 20:22 TH=010 ; transfer hold = 2 cycles */ -/* 23 RE=0 ; ready enable = disabled */ -/* 24 SOR=1 ; sample on ready = same PerClk */ -/* 25 BEM=0 ; byte enable mode = only for write cycles */ -/* 26 PEN=0 ; parity enable = disable */ -/* 27:31 00000 ;reserved */ -/* */ -/* 1 + 00110 + 110 + 000 + 00 + 01 + 01 + 01 + 010 + 0 + 1 + 0 + 0 + 00000 = 0x9b015480 */ -/* */ -/* */ -/* Code for BDI probe: */ -/* */ -/* WDCR 18 0x00000011 ;Select PB1AP */ -/* WDCR 19 0x1b015480 ;PB1AP: Flash */ -/* */ -/* Peripheral Bank 0 Access Parameters */ -/* 0:11 BAS=0x200 ; base address select = 0x200 * 0x100000 (1MB) = */ -/* 12:14 BS=100 ; bank size = 16MB (100) / 32MB (101) */ -/* 15:16 BU=11 ; bank usage = read/write */ -/* 17:18 BW=00 ; bus width = 8-bit */ -/* 19:31 ; reserved */ -/* */ -/* 0x200 + 100 + 11 + 00 + 0 0000 0000 0000 = 0x20098000 */ -/* WDCR 18 0x00000001 ;Select PB1CR */ -/* WDCR 19 0x20098000 ;PB1CR: 1MB at 0x00100000, r/w, 8bit */ - -/* For CPLD */ -/* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 1 + 0 + 00000 */ -/* WDCR_EBC(PB5AP, 0x01010040) */ -/*jsa recommendation: WDCR_EBC(PB5AP, 0x00010040) */ -/* WDCR_EBC(PB5CR, 0X10018000) */ -/* Access parms */ -/* 100 3 8 0 0 0 */ -/* 0x100 + 001 + 11 + 00 + 0 0000 0000 0000 = 0x10038000 */ -/* Address : 0x10000000 */ -/* Size: 2 MB */ -/* Usage: read/write */ -/* Width: 32 bit */ - -/* For Genie onboard fpga 32 bit interface */ -/* 0 1 0 1 0 0 0 0 */ -/* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 0 + 0 + 00000 */ -/* 0x01010000 */ -/* Access parms */ -/* 102 1 c 0 0 0 */ -/* 0x102 + 000 + 11 + 10 + 0 0000 0000 0000 = 0x1021c000 */ -/* Address : 0x10200000 */ -/* Size: 2 MB */ -/* Usage: read/write */ -/* Width: 32 bit */ - -/* Walnut fpga PB7AP */ -/* 0 1 8 1 5 2 8 0 */ -/* 0 + 00000 + 011 + 000 + 00 + 01 + 01 + 01 + 001 + 0 + 1 + 0 + 0 + 00000 */ -/* Walnut fpga PB7CR */ -/* 0xF0318000 */ -/* */ -- 2.25.1