From cfb56b481131f601d5a587a8d89a752b1fd54d0b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 10 May 2015 11:47:09 +0000 Subject: [PATCH] ipq806x: add pcie support to ipq806x based platforms This change adds PCIe support to IPQ806x based platforms. The driver is actually cherry-picked from the following LKML thread: *https://lwn.net/Articles/643086/ (patches 110-111) We also add here an additional fix to support multiple PCI controllers on the same platform (patch 112), and to patch the ap148 & dbs149 DTS files (patch 113). Signed-off-by: Mathieu Olivari SVN-Revision: 45663 --- target/linux/ipq806x/config-3.18 | 6 + target/linux/ipq806x/config-4.0 | 10 +- ...om-Document-PCIe-devicetree-bindings.patch | 266 +++++++ ...-Add-Qualcomm-PCIe-controller-driver.patch | 753 ++++++++++++++++++ ...-add-pcie-nodes-to-ipq806x-platforms.patch | 268 +++++++ ...ically-select-PCI_DOMAINS-if-PCI-is-.patch | 29 + .../700-add-gmac-dts-suport.patch | 19 +- ...om-Document-PCIe-devicetree-bindings.patch | 266 +++++++ ...-Add-Qualcomm-PCIe-controller-driver.patch | 753 ++++++++++++++++++ ...-add-pcie-nodes-to-ipq806x-platforms.patch | 260 ++++++ ...ically-select-PCI_DOMAINS-if-PCI-is-.patch | 29 + .../patches-4.0/700-add-gmac-dts-suport.patch | 26 +- 12 files changed, 2662 insertions(+), 23 deletions(-) create mode 100644 target/linux/ipq806x/patches-3.18/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch create mode 100644 target/linux/ipq806x/patches-3.18/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch create mode 100644 target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch create mode 100644 target/linux/ipq806x/patches-3.18/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch create mode 100644 target/linux/ipq806x/patches-4.0/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch create mode 100644 target/linux/ipq806x/patches-4.0/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch create mode 100644 target/linux/ipq806x/patches-4.0/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch create mode 100644 target/linux/ipq806x/patches-4.0/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch diff --git a/target/linux/ipq806x/config-3.18 b/target/linux/ipq806x/config-3.18 index 48a737452f..d32e9891fb 100644 --- a/target/linux/ipq806x/config-3.18 +++ b/target/linux/ipq806x/config-3.18 @@ -258,6 +258,11 @@ CONFIG_OLD_SIGSUSPEND3=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_DW=y +CONFIG_PCIE_QCOM=y +CONFIG_PCI_DOMAINS=y CONFIG_PCI_MSI=y CONFIG_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y @@ -295,6 +300,7 @@ CONFIG_QCOM_BAM_DMA=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_SCM=y CONFIG_QCOM_WDT=y +CONFIG_RAS=y # CONFIG_RCU_BOOST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 CONFIG_RCU_CPU_STALL_VERBOSE=y diff --git a/target/linux/ipq806x/config-4.0 b/target/linux/ipq806x/config-4.0 index 9d8ff658e4..96644cf529 100644 --- a/target/linux/ipq806x/config-4.0 +++ b/target/linux/ipq806x/config-4.0 @@ -267,7 +267,14 @@ CONFIG_OLD_SIGSUSPEND3=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PCI=y -# CONFIG_PCI_DOMAINS_GENERIC is not set +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_DW=y +CONFIG_PCIE_PME=y +CONFIG_PCIE_QCOM=y +CONFIG_PCI_DEBUG=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y CONFIG_PCI_MSI=y CONFIG_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y @@ -307,6 +314,7 @@ CONFIG_QCOM_BAM_DMA=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_SCM=y CONFIG_QCOM_WDT=y +CONFIG_RAS=y # CONFIG_RCU_BOOST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 CONFIG_RCU_STALL_COMMON=y diff --git a/target/linux/ipq806x/patches-3.18/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch b/target/linux/ipq806x/patches-3.18/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch new file mode 100644 index 0000000000..95398e0ce8 --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch @@ -0,0 +1,266 @@ +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v2,3/5] DT: PCI: qcom: Document PCIe devicetree bindings +From: Stanimir Varbanov +X-Patchwork-Id: 6326181 +Message-Id: <1430743338-10441-4-git-send-email-svarbanov@mm-sol.com> +To: Rob Herring , Kumar Gala , + Mark Rutland , + Grant Likely , + Bjorn Helgaas , + Kishon Vijay Abraham I , + Russell King , Arnd Bergmann +Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, + linux-pci@vger.kernel.org, Mathieu Olivari , + Srinivas Kandagatla , + Stanimir Varbanov +Date: Mon, 4 May 2015 15:42:16 +0300 + +Document Qualcomm PCIe driver devicetree bindings. + +Signed-off-by: Stanimir Varbanov + +--- +.../devicetree/bindings/pci/qcom,pcie.txt | 231 ++++++++++++++++++++ + 1 files changed, 231 insertions(+), 0 deletions(-) + create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt + +diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt +new file mode 100644 +index 0000000..dcf7348 +--- /dev/null ++++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt +@@ -0,0 +1,231 @@ ++* Qualcomm PCI express root complex ++ ++- compatible: ++ Usage: required ++ Value type: ++ Definition: Value shall include ++ - "qcom,pcie-v0" for apq/ipq8064 ++ - "qcom,pcie-v1" for apq8084 ++ ++- reg: ++ Usage: required ++ Value type: ++ Definition: Register ranges as listed in the reg-names property ++ ++- reg-names: ++ Usage: required ++ Value type: ++ Definition: Must include the following entries ++ - "parf" Qualcomm specific registers ++ - "dbi" Designware PCIe registers ++ - "elbi" External local bus interface registers ++ - "config" PCIe configuration space ++ ++- device_type: ++ Usage: required ++ Value type: ++ Definition: Should be "pci". As specified in designware-pcie.txt ++ ++- #address-cells: ++ Usage: required ++ Value type: ++ Definition: Should be set to 3. As specified in designware-pcie.txt ++ ++- #size-cells: ++ Usage: required ++ Value type: ++ Definition: Should be set 2. As specified in designware-pcie.txt ++ ++- ranges: ++ Usage: required ++ Value type: ++ Definition: As specified in designware-pcie.txt ++ ++- interrupts: ++ Usage: required ++ Value type: ++ Definition: MSI interrupt ++ ++- interrupt-names: ++ Usage: required ++ Value type: ++ Definition: Should contain "msi" ++ ++- #interrupt-cells: ++ Usage: required ++ Value type: ++ Definition: Should be 1. As specified in designware-pcie.txt ++ ++- interrupt-map-mask: ++ Usage: required ++ Value type: ++ Definition: As specified in designware-pcie.txt ++ ++- interrupt-map: ++ Usage: required ++ Value type: ++ Definition: As specified in designware-pcie.txt ++ ++- clocks: ++ Usage: required ++ Value type: ++ Definition: List of phandle and clock specifier pairs as listed ++ in clock-names property ++ ++- clock-names: ++ Usage: required ++ Value type: ++ Definition: Should contain the following entries ++ * should be populated for v0 and v1 ++ - "iface" Configuration AHB clock ++ ++ * should be populated for v0 ++ - "core" Clocks the pcie hw block ++ - "phy" Clocks the pcie PHY block ++ ++ * should be populated for v1 ++ - "aux" Auxiliary (AUX) clock ++ - "bus_master" Master AXI clock ++ - "bus_slave" Slave AXI clock ++ ++- resets: ++ Usage: required ++ Value type: ++ Definition: List of phandle and reset specifier pairs as listed ++ in reset-names property ++ ++- reset-names: ++ Usage: required ++ Value type: ++ Definition: Should contain the following entries ++ * should be populated for v0 ++ - "axi" AXI reset ++ - "ahb" AHB reset ++ - "por" POR reset ++ - "pci" PCI reset ++ - "phy" PHY reset ++ ++ * should be populated for v1 ++ - "core" Core reset ++ ++- power-domains: ++ Usage: required (for v1 only) ++ Value type: ++ Definition: A phandle and power domain specifier pair to the ++ power domain which is responsible for collapsing ++ and restoring power to the peripheral ++ ++- -supply: ++ Usage: required ++ Value type: ++ Definition: List of phandles to the power supply regulator(s) ++ * should be populated for v0 and v1 ++ - "vdda" core analog power supply ++ ++ * should be populated for v0 ++ - "vdda_phy" analog power supply for PHY ++ - "vdda_refclk" analog power supply for IC which generate ++ reference clock ++ ++- phys: ++ Usage: required (for v1 only) ++ Value type: ++ Definition: List of phandle(s) as listed in phy-names property ++ ++- phy-names: ++ Usage: required (for v1 only) ++ Value type: ++ Definition: Should contain "pciephy" ++ ++- -gpio: ++ Usage: optional ++ Value type: ++ Definition: List of phandle and gpio specifier pairs. Should contain ++ - "perst" PCIe endpoint reset signal line ++ - "pewake" PCIe endpoint wake signal line ++ ++- pinctrl-0: ++ Usage: required ++ Value type: ++ Definition: List of phandles pointing at a pin(s) configuration ++ ++- pinctrl-names ++ Usage: required ++ Value type: ++ Definition: List of names of pinctrl-0 state ++ ++* Example for v0 ++ pcie0: pci@1b500000 { ++ compatible = "qcom,pcie-v0"; ++ reg = <0x1b500000 0x1000 ++ 0x1b502000 0x80 ++ 0x1b600000 0x100 ++ 0x0ff00000 0x100000>; ++ reg-names = "dbi", "elbi", "parf", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <0>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ ++ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* memory */ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ clocks = <&gcc PCIE_A_CLK>, ++ <&gcc PCIE_H_CLK>, ++ <&gcc PCIE_PHY_CLK>; ++ clock-names = "core", "iface", "phy"; ++ resets = <&gcc PCIE_ACLK_RESET>, ++ <&gcc PCIE_HCLK_RESET>, ++ <&gcc PCIE_POR_RESET>, ++ <&gcc PCIE_PCI_RESET>, ++ <&gcc PCIE_PHY_RESET>; ++ reset-names = "axi", "ahb", "por", "pci", "phy"; ++ }; ++ ++* Example for v1 ++ pcie0@fc520000 { ++ compatible = "qcom,pcie-v1"; ++ reg = <0xfc520000 0x2000>, ++ <0xff000000 0x1000>, ++ <0xff001000 0x1000>, ++ <0xff002000 0x2000>; ++ reg-names = "parf", "dbi", "elbi", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <0>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */ ++ 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, ++ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, ++ <&gcc GCC_PCIE_0_SLV_AXI_CLK>, ++ <&gcc GCC_PCIE_0_AUX_CLK>; ++ clock-names = "iface", "master_bus", "slave_bus", "aux"; ++ resets = <&gcc GCC_PCIE_0_BCR>; ++ reset-names = "core"; ++ power-domains = <&gcc PCIE0_GDSC>; ++ vdda-supply = <&pma8084_l3>; ++ phys = <&pciephy0>; ++ phy-names = "pciephy"; ++ perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>; ++ pinctrl-0 = <&pcie0_pins_default>; ++ pinctrl-names = "default"; ++ }; diff --git a/target/linux/ipq806x/patches-3.18/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch b/target/linux/ipq806x/patches-3.18/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch new file mode 100644 index 0000000000..a0c9c7c36e --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch @@ -0,0 +1,753 @@ +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v2,4/5] PCI: qcom: Add Qualcomm PCIe controller driver +From: Stanimir Varbanov +X-Patchwork-Id: 6326161 +Message-Id: <1430743338-10441-5-git-send-email-svarbanov@mm-sol.com> +To: Rob Herring , Kumar Gala , + Mark Rutland , + Grant Likely , + Bjorn Helgaas , + Kishon Vijay Abraham I , + Russell King , Arnd Bergmann +Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, + linux-pci@vger.kernel.org, Mathieu Olivari , + Srinivas Kandagatla , + Stanimir Varbanov +Date: Mon, 4 May 2015 15:42:17 +0300 + +The PCIe driver reuse the Designware common code for host +and MSI initialization, and also program the Qualcomm +application specific registers. + +Signed-off-by: Stanimir Varbanov + +--- +MAINTAINERS | 7 + + drivers/pci/host/Kconfig | 9 + + drivers/pci/host/Makefile | 1 + + drivers/pci/host/pcie-qcom.c | 677 ++++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 694 insertions(+), 0 deletions(-) + create mode 100644 drivers/pci/host/pcie-qcom.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -7127,6 +7127,13 @@ L: linux-pci@vger.kernel.org + S: Maintained + F: drivers/pci/host/*spear* + ++PCIE DRIVER FOR QUALCOMM MSM ++M: Stanimir Varbanov ++L: linux-pci@vger.kernel.org ++L: linux-arm-msm@vger.kernel.org ++S: Maintained ++F: drivers/pci/host/*qcom* ++ + PCMCIA SUBSYSTEM + P: Linux PCMCIA Team + L: linux-pcmcia@lists.infradead.org +--- a/drivers/pci/host/Kconfig ++++ b/drivers/pci/host/Kconfig +@@ -91,4 +91,13 @@ config PCI_XGENE + There are 5 internal PCIe ports available. Each port is GEN3 capable + and have varied lanes from x1 to x8. + ++config PCIE_QCOM ++ bool "Qualcomm PCIe controller" ++ depends on ARCH_QCOM && OF || (ARM && COMPILE_TEST) ++ select PCIE_DW ++ select PCIEPORTBUS ++ help ++ Say Y here to enable PCIe controller support on Qualcomm SoCs. The ++ PCIe controller use Designware core plus Qualcomm specific hardware ++ wrappers. + endmenu +--- /dev/null ++++ b/drivers/pci/host/pcie-qcom.c +@@ -0,0 +1,677 @@ ++/* ++ * Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-designware.h" ++ ++#define PCIE20_PARF_PHY_CTRL 0x40 ++#define PCIE20_PARF_PHY_REFCLK 0x4C ++#define PCIE20_PARF_DBI_BASE_ADDR 0x168 ++#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c ++#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 ++ ++#define PCIE20_ELBI_SYS_CTRL 0x04 ++#define PCIE20_ELBI_SYS_STTS 0x08 ++#define XMLH_LINK_UP BIT(10) ++ ++#define PCIE20_CAP 0x70 ++#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10) ++ ++#define PERST_DELAY_MIN_US 1000 ++#define PERST_DELAY_MAX_US 1005 ++ ++#define LINKUP_DELAY_MIN_US 5000 ++#define LINKUP_DELAY_MAX_US 5100 ++#define LINKUP_RETRIES_COUNT 20 ++ ++#define PCIE_V0 0 /* apq8064 */ ++#define PCIE_V1 1 /* apq8084 */ ++ ++struct qcom_pcie_resources_v0 { ++ struct clk *iface_clk; ++ struct clk *core_clk; ++ struct clk *phy_clk; ++ struct reset_control *pci_reset; ++ struct reset_control *axi_reset; ++ struct reset_control *ahb_reset; ++ struct reset_control *por_reset; ++ struct reset_control *phy_reset; ++ struct regulator *vdda; ++ struct regulator *vdda_phy; ++ struct regulator *vdda_refclk; ++}; ++ ++struct qcom_pcie_resources_v1 { ++ struct clk *iface; ++ struct clk *aux; ++ struct clk *master_bus; ++ struct clk *slave_bus; ++ struct reset_control *core; ++ struct regulator *vdda; ++}; ++ ++union pcie_resources { ++ struct qcom_pcie_resources_v0 v0; ++ struct qcom_pcie_resources_v1 v1; ++}; ++ ++struct qcom_pcie { ++ struct pcie_port pp; ++ struct device *dev; ++ union pcie_resources res; ++ void __iomem *parf; ++ void __iomem *dbi; ++ void __iomem *elbi; ++ struct phy *phy; ++ struct gpio_desc *reset; ++ unsigned int version; ++}; ++ ++#define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp) ++ ++static inline void ++writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask) ++{ ++ u32 val = readl(addr); ++ ++ val &= ~clear_mask; ++ val |= set_mask; ++ writel(val, addr); ++} ++ ++static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert) ++{ ++ int val, active_low; ++ ++ if (IS_ERR_OR_NULL(pcie->reset)) ++ return; ++ ++ active_low = gpiod_is_active_low(pcie->reset); ++ ++ if (assert) ++ val = !!active_low; ++ else ++ val = !active_low; ++ ++ gpiod_set_value(pcie->reset, val); ++ ++ usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US); ++} ++ ++static void qcom_ep_reset_assert(struct qcom_pcie *pcie) ++{ ++ qcom_ep_reset_assert_deassert(pcie, 1); ++} ++ ++static void qcom_ep_reset_deassert(struct qcom_pcie *pcie) ++{ ++ qcom_ep_reset_assert_deassert(pcie, 0); ++} ++ ++static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg) ++{ ++ struct pcie_port *pp = arg; ++ ++ return dw_handle_msi_irq(pp); ++} ++ ++static int qcom_pcie_link_up(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ u32 val = readl(pcie->dbi + PCIE20_CAP_LINKCTRLSTATUS); ++ ++ return val & BIT(29) ? 1 : 0; ++} ++ ++static void qcom_pcie_disable_resources_v0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v0 *res = &pcie->res.v0; ++ ++ reset_control_assert(res->pci_reset); ++ reset_control_assert(res->axi_reset); ++ reset_control_assert(res->ahb_reset); ++ reset_control_assert(res->por_reset); ++ reset_control_assert(res->pci_reset); ++ clk_disable_unprepare(res->iface_clk); ++ clk_disable_unprepare(res->core_clk); ++ clk_disable_unprepare(res->phy_clk); ++ regulator_disable(res->vdda); ++ regulator_disable(res->vdda_phy); ++ regulator_disable(res->vdda_refclk); ++} ++ ++static void qcom_pcie_disable_resources_v1(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v1 *res = &pcie->res.v1; ++ ++ reset_control_assert(res->core); ++ clk_disable_unprepare(res->slave_bus); ++ clk_disable_unprepare(res->master_bus); ++ clk_disable_unprepare(res->iface); ++ clk_disable_unprepare(res->aux); ++ regulator_disable(res->vdda); ++} ++ ++static int qcom_pcie_enable_resources_v0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v0 *res = &pcie->res.v0; ++ struct device *dev = pcie->dev; ++ int ret; ++ ++ ret = regulator_enable(res->vdda); ++ if (ret) { ++ dev_err(dev, "cannot enable vdda regulator\n"); ++ return ret; ++ } ++ ++ ret = regulator_enable(res->vdda_refclk); ++ if (ret) { ++ dev_err(dev, "cannot enable vdda_refclk regulator\n"); ++ goto err_refclk; ++ } ++ ++ ret = regulator_enable(res->vdda_phy); ++ if (ret) { ++ dev_err(dev, "cannot enable vdda_phy regulator\n"); ++ goto err_vdda_phy; ++ } ++ ++ ret = clk_prepare_enable(res->iface_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable iface clock\n"); ++ goto err_iface; ++ } ++ ++ ret = clk_prepare_enable(res->core_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable core clock\n"); ++ goto err_clk_core; ++ } ++ ++ ret = clk_prepare_enable(res->phy_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable phy clock\n"); ++ goto err_clk_phy; ++ } ++ ++ ret = reset_control_deassert(res->ahb_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert ahb reset\n"); ++ goto err_reset_ahb; ++ } ++ ++ return 0; ++ ++err_reset_ahb: ++ clk_disable_unprepare(res->phy_clk); ++err_clk_phy: ++ clk_disable_unprepare(res->core_clk); ++err_clk_core: ++ clk_disable_unprepare(res->iface_clk); ++err_iface: ++ regulator_disable(res->vdda_phy); ++err_vdda_phy: ++ regulator_disable(res->vdda_refclk); ++err_refclk: ++ regulator_disable(res->vdda); ++ return ret; ++} ++ ++static int qcom_pcie_enable_resources_v1(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v1 *res = &pcie->res.v1; ++ struct device *dev = pcie->dev; ++ int ret; ++ ++ ret = reset_control_deassert(res->core); ++ if (ret) { ++ dev_err(dev, "cannot deassert core reset\n"); ++ return ret; ++ } ++ ++ ret = clk_prepare_enable(res->aux); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable aux clock\n"); ++ goto err_res; ++ } ++ ++ ret = clk_prepare_enable(res->iface); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable iface clock\n"); ++ goto err_aux; ++ } ++ ++ ret = clk_prepare_enable(res->master_bus); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable master_bus clock\n"); ++ goto err_iface; ++ } ++ ++ ret = clk_prepare_enable(res->slave_bus); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable slave_bus clock\n"); ++ goto err_master; ++ } ++ ++ ret = regulator_enable(res->vdda); ++ if (ret) { ++ dev_err(dev, "cannot enable vdda regulator\n"); ++ goto err_slave; ++ } ++ ++ return 0; ++ ++err_slave: ++ clk_disable_unprepare(res->slave_bus); ++err_master: ++ clk_disable_unprepare(res->master_bus); ++err_iface: ++ clk_disable_unprepare(res->iface); ++err_aux: ++ clk_disable_unprepare(res->aux); ++err_res: ++ reset_control_assert(res->core); ++ ++ return ret; ++} ++ ++static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v0 *res = &pcie->res.v0; ++ struct device *dev = pcie->dev; ++ ++ res->vdda = devm_regulator_get(dev, "vdda"); ++ if (IS_ERR(res->vdda)) ++ return PTR_ERR(res->vdda); ++ ++ res->vdda_phy = devm_regulator_get(dev, "vdda_phy"); ++ if (IS_ERR(res->vdda_phy)) ++ return PTR_ERR(res->vdda_phy); ++ ++ res->vdda_refclk = devm_regulator_get(dev, "vdda_refclk"); ++ if (IS_ERR(res->vdda_refclk)) ++ return PTR_ERR(res->vdda_refclk); ++ ++ res->iface_clk = devm_clk_get(dev, "iface"); ++ if (IS_ERR(res->iface_clk)) ++ return PTR_ERR(res->iface_clk); ++ ++ res->core_clk = devm_clk_get(dev, "core"); ++ if (IS_ERR(res->core_clk)) ++ return PTR_ERR(res->core_clk); ++ ++ res->phy_clk = devm_clk_get(dev, "phy"); ++ if (IS_ERR(res->phy_clk)) ++ return PTR_ERR(res->phy_clk); ++ ++ res->pci_reset = devm_reset_control_get(dev, "pci"); ++ if (IS_ERR(res->pci_reset)) ++ return PTR_ERR(res->pci_reset); ++ ++ res->axi_reset = devm_reset_control_get(dev, "axi"); ++ if (IS_ERR(res->axi_reset)) ++ return PTR_ERR(res->axi_reset); ++ ++ res->ahb_reset = devm_reset_control_get(dev, "ahb"); ++ if (IS_ERR(res->ahb_reset)) ++ return PTR_ERR(res->ahb_reset); ++ ++ res->por_reset = devm_reset_control_get(dev, "por"); ++ if (IS_ERR(res->por_reset)) ++ return PTR_ERR(res->por_reset); ++ ++ res->phy_reset = devm_reset_control_get(dev, "phy"); ++ if (IS_ERR(res->phy_reset)) ++ return PTR_ERR(res->phy_reset); ++ ++ return 0; ++} ++ ++static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v1 *res = &pcie->res.v1; ++ struct device *dev = pcie->dev; ++ ++ res->vdda = devm_regulator_get(dev, "vdda"); ++ if (IS_ERR(res->vdda)) ++ return PTR_ERR(res->vdda); ++ ++ res->iface = devm_clk_get(dev, "iface"); ++ if (IS_ERR(res->iface)) ++ return PTR_ERR(res->iface); ++ ++ res->aux = devm_clk_get(dev, "aux"); ++ if (IS_ERR(res->aux) && PTR_ERR(res->aux) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; ++ else if (IS_ERR(res->aux)) ++ res->aux = NULL; ++ ++ res->master_bus = devm_clk_get(dev, "master_bus"); ++ if (IS_ERR(res->master_bus)) ++ return PTR_ERR(res->master_bus); ++ ++ res->slave_bus = devm_clk_get(dev, "slave_bus"); ++ if (IS_ERR(res->slave_bus)) ++ return PTR_ERR(res->slave_bus); ++ ++ res->core = devm_reset_control_get(dev, "core"); ++ if (IS_ERR(res->core)) ++ return PTR_ERR(res->core); ++ ++ return 0; ++} ++ ++static int qcom_pcie_enable_link_training(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ struct device *dev = pp->dev; ++ int retries; ++ u32 val; ++ ++ /* enable link training */ ++ writel_masked(pcie->elbi + PCIE20_ELBI_SYS_CTRL, 0, BIT(0)); ++ ++ /* wait for up to 100ms for the link to come up */ ++ retries = LINKUP_RETRIES_COUNT; ++ do { ++ val = readl(pcie->elbi + PCIE20_ELBI_SYS_STTS); ++ if (val & XMLH_LINK_UP) ++ break; ++ usleep_range(LINKUP_DELAY_MIN_US, LINKUP_DELAY_MAX_US); ++ } while (retries--); ++ ++ if (retries < 0 || !dw_pcie_link_up(pp)) { ++ dev_err(dev, "link initialization failed\n"); ++ return -ENXIO; ++ } ++ ++ return 0; ++} ++ ++static void qcom_pcie_host_init_v1(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ int ret; ++ ++ qcom_ep_reset_assert(pcie); ++ ++ ret = qcom_pcie_enable_resources_v1(pcie); ++ if (ret) ++ return; ++ ++ /* change DBI base address */ ++ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); ++ ++ if (IS_ENABLED(CONFIG_PCI_MSI)) ++ writel_masked(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT, ++ 0, BIT(31)); ++ ++ ret = phy_init(pcie->phy); ++ if (ret) ++ goto err_res; ++ ++ ret = phy_power_on(pcie->phy); ++ if (ret) ++ goto err_phy; ++ ++ dw_pcie_setup_rc(pp); ++ ++ if (IS_ENABLED(CONFIG_PCI_MSI)) ++ dw_pcie_msi_init(pp); ++ ++ qcom_ep_reset_deassert(pcie); ++ ++ ret = qcom_pcie_enable_link_training(pp); ++ if (ret) ++ goto err; ++ ++ return; ++ ++err: ++ qcom_ep_reset_assert(pcie); ++ phy_power_off(pcie->phy); ++err_phy: ++ phy_exit(pcie->phy); ++err_res: ++ qcom_pcie_disable_resources_v1(pcie); ++} ++ ++static void qcom_pcie_host_init_v0(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ struct qcom_pcie_resources_v0 *res = &pcie->res.v0; ++ struct device *dev = pcie->dev; ++ int ret; ++ ++ qcom_ep_reset_assert(pcie); ++ ++ ret = qcom_pcie_enable_resources_v0(pcie); ++ if (ret) ++ return; ++ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0); ++ ++ /* enable external reference clock */ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16)); ++ ++ ret = reset_control_deassert(res->phy_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert phy reset\n"); ++ return; ++ } ++ ++ ret = reset_control_deassert(res->pci_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert pci reset\n"); ++ return; ++ } ++ ++ ret = reset_control_deassert(res->por_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert por reset\n"); ++ return; ++ } ++ ++ ret = reset_control_deassert(res->axi_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert axi reset\n"); ++ return; ++ } ++ ++ /* wait 150ms for clock acquisition */ ++ usleep_range(10000, 15000); ++ ++ dw_pcie_setup_rc(pp); ++ ++ if (IS_ENABLED(CONFIG_PCI_MSI)) ++ dw_pcie_msi_init(pp); ++ ++ qcom_ep_reset_deassert(pcie); ++ ++ ret = qcom_pcie_enable_link_training(pp); ++ if (ret) ++ goto err; ++ ++ return; ++err: ++ qcom_ep_reset_assert(pcie); ++ qcom_pcie_disable_resources_v0(pcie); ++} ++ ++static void qcom_pcie_host_init(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ ++ if (pcie->version == PCIE_V0) ++ return qcom_pcie_host_init_v0(pp); ++ else ++ return qcom_pcie_host_init_v1(pp); ++} ++ ++static int ++qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val) ++{ ++ /* the device class is not reported correctly from the register */ ++ if (where == PCI_CLASS_REVISION && size == 4) { ++ *val = readl(pp->dbi_base + PCI_CLASS_REVISION); ++ *val &= ~(0xffff << 16); ++ *val |= PCI_CLASS_BRIDGE_PCI << 16; ++ return PCIBIOS_SUCCESSFUL; ++ } ++ ++ return dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where, ++ size, val); ++} ++ ++static struct pcie_host_ops qcom_pcie_ops = { ++ .link_up = qcom_pcie_link_up, ++ .host_init = qcom_pcie_host_init, ++ .rd_own_conf = qcom_pcie_rd_own_conf, ++}; ++ ++static const struct of_device_id qcom_pcie_match[] = { ++ { .compatible = "qcom,pcie-v0", .data = (void *)PCIE_V0 }, ++ { .compatible = "qcom,pcie-v1", .data = (void *)PCIE_V1 }, ++ { } ++}; ++ ++static int qcom_pcie_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ const struct of_device_id *match; ++ struct resource *res; ++ struct qcom_pcie *pcie; ++ struct pcie_port *pp; ++ int ret; ++ ++ match = of_match_node(qcom_pcie_match, dev->of_node); ++ if (!match) ++ return -ENXIO; ++ ++ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); ++ if (!pcie) ++ return -ENOMEM; ++ ++ pcie->version = (unsigned int)match->data; ++ ++ pcie->reset = devm_gpiod_get_optional(dev, "perst"); ++ if (IS_ERR(pcie->reset) && PTR_ERR(pcie->reset) == -EPROBE_DEFER) ++ return PTR_ERR(pcie->reset); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); ++ pcie->parf = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pcie->parf)) ++ return PTR_ERR(pcie->parf); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); ++ pcie->dbi = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pcie->dbi)) ++ return PTR_ERR(pcie->dbi); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi"); ++ pcie->elbi = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pcie->elbi)) ++ return PTR_ERR(pcie->elbi); ++ ++ pcie->phy = devm_phy_optional_get(dev, "pciephy"); ++ if (IS_ERR(pcie->phy)) ++ return PTR_ERR(pcie->phy); ++ ++ pcie->dev = dev; ++ ++ if (pcie->version == PCIE_V0) ++ ret = qcom_pcie_get_resources_v0(pcie); ++ else ++ ret = qcom_pcie_get_resources_v1(pcie); ++ ++ if (ret) ++ return ret; ++ ++ pp = &pcie->pp; ++ pp->dev = dev; ++ pp->dbi_base = pcie->dbi; ++ pp->root_bus_nr = -1; ++ pp->ops = &qcom_pcie_ops; ++ ++ if (IS_ENABLED(CONFIG_PCI_MSI)) { ++ pp->msi_irq = platform_get_irq_byname(pdev, "msi"); ++ if (pp->msi_irq < 0) { ++ dev_err(dev, "cannot get msi irq\n"); ++ return pp->msi_irq; ++ } ++ ++ ret = devm_request_irq(dev, pp->msi_irq, ++ qcom_pcie_msi_irq_handler, ++ IRQF_SHARED, "qcom-pcie-msi", pp); ++ if (ret) { ++ dev_err(dev, "cannot request msi irq\n"); ++ return ret; ++ } ++ } ++ ++ ret = dw_pcie_host_init(pp); ++ if (ret) { ++ dev_err(dev, "cannot initialize host\n"); ++ return ret; ++ } ++ ++ platform_set_drvdata(pdev, pcie); ++ ++ return 0; ++} ++ ++static int qcom_pcie_remove(struct platform_device *pdev) ++{ ++ struct qcom_pcie *pcie = platform_get_drvdata(pdev); ++ ++ qcom_ep_reset_assert(pcie); ++ phy_power_off(pcie->phy); ++ phy_exit(pcie->phy); ++ if (pcie->version == PCIE_V0) ++ qcom_pcie_disable_resources_v0(pcie); ++ else ++ qcom_pcie_disable_resources_v1(pcie); ++ ++ return 0; ++} ++ ++static struct platform_driver qcom_pcie_driver = { ++ .probe = qcom_pcie_probe, ++ .remove = qcom_pcie_remove, ++ .driver = { ++ .name = "qcom-pcie", ++ .of_match_table = qcom_pcie_match, ++ }, ++}; ++ ++module_platform_driver(qcom_pcie_driver); ++ ++MODULE_AUTHOR("Stanimir Varbanov "); ++MODULE_DESCRIPTION("Qualcomm PCIe root complex driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:qcom-pcie"); +--- a/drivers/pci/host/Makefile ++++ b/drivers/pci/host/Makefile +@@ -11,3 +11,4 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spe + obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o + obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o + obj-$(CONFIG_PCI_XGENE) += pci-xgene.o ++obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o diff --git a/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch new file mode 100644 index 0000000000..2613dff4df --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch @@ -0,0 +1,268 @@ +From 5b40516b2f5fb9b2a7d6d3e2e924f12ec9d183a8 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Tue, 21 Apr 2015 19:01:42 -0700 +Subject: [PATCH 8/9] ARM: dts: qcom: add pcie nodes to ipq806x platforms + +qcom-pcie driver now supports version 0 of the controller. This change +adds the corresponding entries to the IPQ806x dtsi file and +corresponding platform (AP148). + +Signed-off-by: Mathieu Olivari +--- + arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 30 ++++++++ + arch/arm/boot/dts/qcom-ipq8064.dtsi | 124 +++++++++++++++++++++++++++++++ + 2 files changed, 154 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +@@ -30,6 +30,22 @@ + bias-disable; + }; + ++ pcie1_pins: pcie1_pinmux { ++ mux { ++ pins = "gpio3"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ ++ pcie2_pins: pcie2_pinmux { ++ mux { ++ pins = "gpio48"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; +@@ -136,5 +152,19 @@ + usb30@1 { + status = "ok"; + }; ++ ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 3 0>; ++ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 48 0>; ++ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-names = "default"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +@@ -37,6 +37,30 @@ + bias-disable; + }; + ++ pcie1_pins: pcie1_pinmux { ++ mux { ++ pins = "gpio3"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ ++ pcie2_pins: pcie2_pinmux { ++ mux { ++ pins = "gpio48"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ ++ pcie3_pins: pcie3_pinmux { ++ mux { ++ pins = "gpio63"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; +@@ -153,6 +177,27 @@ + status = "ok"; + }; + ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 3 0>; ++ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 48 0>; ++ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ pcie2: pci@1b900000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 63 0>; ++ pinctrl-0 = <&pcie3_pins>; ++ pinctrl-names = "default"; ++ }; ++ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -3,6 +3,7 @@ + #include "skeleton.dtsi" + #include + #include ++#include + + / { + model = "Qualcomm IPQ8064"; +@@ -306,6 +307,129 @@ + #reset-cells = <1>; + }; + ++ pcie0: pci@1b500000 { ++ compatible = "qcom,pcie-v0"; ++ reg = <0x1b500000 0x1000 ++ 0x1b502000 0x80 ++ 0x1b600000 0x100 ++ 0x0ff00000 0x100000>; ++ reg-names = "dbi", "elbi", "parf", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <0>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* downstream I/O */ ++ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ ++ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ ++ clocks = <&gcc PCIE_A_CLK>, ++ <&gcc PCIE_H_CLK>, ++ <&gcc PCIE_PHY_CLK>; ++ clock-names = "core", "iface", "phy"; ++ ++ resets = <&gcc PCIE_ACLK_RESET>, ++ <&gcc PCIE_HCLK_RESET>, ++ <&gcc PCIE_POR_RESET>, ++ <&gcc PCIE_PCI_RESET>, ++ <&gcc PCIE_PHY_RESET>; ++ reset-names = "axi", "ahb", "por", "pci", "phy"; ++ ++ status = "disabled"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ compatible = "qcom,pcie-v0"; ++ reg = <0x1b700000 0x1000 ++ 0x1b702000 0x80 ++ 0x1b800000 0x100 ++ 0x31f00000 0x100000>; ++ reg-names = "dbi", "elbi", "parf", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <1>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ranges = <0x81000000 0 0 0x31e00000 0 0x00100000 /* downstream I/O */ ++ 0x82000000 0 0x00000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ ++ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ ++ clocks = <&gcc PCIE_1_A_CLK>, ++ <&gcc PCIE_1_H_CLK>, ++ <&gcc PCIE_1_PHY_CLK>; ++ clock-names = "core", "iface", "phy"; ++ ++ resets = <&gcc PCIE_1_ACLK_RESET>, ++ <&gcc PCIE_1_HCLK_RESET>, ++ <&gcc PCIE_1_POR_RESET>, ++ <&gcc PCIE_1_PCI_RESET>, ++ <&gcc PCIE_1_PHY_RESET>; ++ reset-names = "axi", "ahb", "por", "pci", "phy"; ++ ++ status = "disabled"; ++ }; ++ ++ pcie2: pci@1b900000 { ++ compatible = "qcom,pcie-v0"; ++ reg = <0x1b900000 0x1000 ++ 0x1b902000 0x80 ++ 0x1ba00000 0x100 ++ 0x35f00000 0x100000>; ++ reg-names = "dbi", "elbi", "parf", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <2>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ranges = <0x81000000 0 0 0x35e00000 0 0x00100000 /* downstream I/O */ ++ 0x82000000 0 0x00000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ ++ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ ++ clocks = <&gcc PCIE_2_A_CLK>, ++ <&gcc PCIE_2_H_CLK>, ++ <&gcc PCIE_2_PHY_CLK>; ++ clock-names = "core", "iface", "phy"; ++ ++ resets = <&gcc PCIE_2_ACLK_RESET>, ++ <&gcc PCIE_2_HCLK_RESET>, ++ <&gcc PCIE_2_POR_RESET>, ++ <&gcc PCIE_2_PCI_RESET>, ++ <&gcc PCIE_2_PHY_RESET>; ++ reset-names = "axi", "ahb", "por", "pci", "phy"; ++ ++ status = "disabled"; ++ }; ++ + hs_phy_1: phy@100f8800 { + compatible = "qcom,dwc3-hs-usb-phy"; + reg = <0x100f8800 0x30>; +@@ -389,6 +513,5 @@ + dr_mode = "host"; + }; + }; +- + }; + }; diff --git a/target/linux/ipq806x/patches-3.18/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-3.18/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch new file mode 100644 index 0000000000..4f0e45f656 --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch @@ -0,0 +1,29 @@ +From f004aa1dec6e2e206be025de15b115d60f2b21e3 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Tue, 21 Apr 2015 19:09:07 -0700 +Subject: [PATCH 9/9] ARM: qcom: automatically select PCI_DOMAINS if PCI is + enabled + +If multiple PCIe devices are present in the system, the kernel will +panic at boot time when trying to scan the PCI buses. This happens on +IPQ806x based platforms, which has 3 PCIe ports. + +Enabling this option allows the kernel to assign the pci-domains +according to the device-tree content. This allows multiple PCIe +controllers to coexist in the system. + +Signed-off-by: Mathieu Olivari +--- + arch/arm/mach-qcom/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/mach-qcom/Kconfig ++++ b/arch/arm/mach-qcom/Kconfig +@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM + select CLKSRC_OF + select PINCTRL + select QCOM_SCM if SMP ++ select PCI_DOMAINS if PCI + help + Support for Qualcomm's devicetree based systems. + diff --git a/target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch b/target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch index 348f24b921..fe670cf99e 100644 --- a/target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch +++ b/target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch @@ -16,7 +16,7 @@ i2c4_pins: i2c4_pinmux { pins = "gpio12", "gpio13"; function = "gsbi4"; -@@ -38,6 +45,25 @@ +@@ -54,6 +61,25 @@ bias-none; }; }; @@ -42,7 +42,7 @@ }; gsbi@16300000 { -@@ -76,6 +102,7 @@ +@@ -92,6 +118,7 @@ #size-cells = <1>; spi-max-frequency = <50000000>; reg = <0>; @@ -50,9 +50,9 @@ partition@0 { label = "lowlevel_init"; -@@ -136,5 +163,66 @@ - usb30@1 { - status = "ok"; +@@ -166,5 +193,66 @@ + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; }; + + mdio0: mdio { @@ -119,18 +119,19 @@ }; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -3,6 +3,7 @@ - #include "skeleton.dtsi" +@@ -4,6 +4,7 @@ #include #include + #include +#include / { model = "Qualcomm IPQ8064"; -@@ -390,5 +391,41 @@ +@@ -513,5 +514,42 @@ + dr_mode = "host"; }; }; - ++ + nss-gmac-common { + reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>; + reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base"; diff --git a/target/linux/ipq806x/patches-4.0/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch b/target/linux/ipq806x/patches-4.0/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch new file mode 100644 index 0000000000..95398e0ce8 --- /dev/null +++ b/target/linux/ipq806x/patches-4.0/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch @@ -0,0 +1,266 @@ +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v2,3/5] DT: PCI: qcom: Document PCIe devicetree bindings +From: Stanimir Varbanov +X-Patchwork-Id: 6326181 +Message-Id: <1430743338-10441-4-git-send-email-svarbanov@mm-sol.com> +To: Rob Herring , Kumar Gala , + Mark Rutland , + Grant Likely , + Bjorn Helgaas , + Kishon Vijay Abraham I , + Russell King , Arnd Bergmann +Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, + linux-pci@vger.kernel.org, Mathieu Olivari , + Srinivas Kandagatla , + Stanimir Varbanov +Date: Mon, 4 May 2015 15:42:16 +0300 + +Document Qualcomm PCIe driver devicetree bindings. + +Signed-off-by: Stanimir Varbanov + +--- +.../devicetree/bindings/pci/qcom,pcie.txt | 231 ++++++++++++++++++++ + 1 files changed, 231 insertions(+), 0 deletions(-) + create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt + +diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt +new file mode 100644 +index 0000000..dcf7348 +--- /dev/null ++++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt +@@ -0,0 +1,231 @@ ++* Qualcomm PCI express root complex ++ ++- compatible: ++ Usage: required ++ Value type: ++ Definition: Value shall include ++ - "qcom,pcie-v0" for apq/ipq8064 ++ - "qcom,pcie-v1" for apq8084 ++ ++- reg: ++ Usage: required ++ Value type: ++ Definition: Register ranges as listed in the reg-names property ++ ++- reg-names: ++ Usage: required ++ Value type: ++ Definition: Must include the following entries ++ - "parf" Qualcomm specific registers ++ - "dbi" Designware PCIe registers ++ - "elbi" External local bus interface registers ++ - "config" PCIe configuration space ++ ++- device_type: ++ Usage: required ++ Value type: ++ Definition: Should be "pci". As specified in designware-pcie.txt ++ ++- #address-cells: ++ Usage: required ++ Value type: ++ Definition: Should be set to 3. As specified in designware-pcie.txt ++ ++- #size-cells: ++ Usage: required ++ Value type: ++ Definition: Should be set 2. As specified in designware-pcie.txt ++ ++- ranges: ++ Usage: required ++ Value type: ++ Definition: As specified in designware-pcie.txt ++ ++- interrupts: ++ Usage: required ++ Value type: ++ Definition: MSI interrupt ++ ++- interrupt-names: ++ Usage: required ++ Value type: ++ Definition: Should contain "msi" ++ ++- #interrupt-cells: ++ Usage: required ++ Value type: ++ Definition: Should be 1. As specified in designware-pcie.txt ++ ++- interrupt-map-mask: ++ Usage: required ++ Value type: ++ Definition: As specified in designware-pcie.txt ++ ++- interrupt-map: ++ Usage: required ++ Value type: ++ Definition: As specified in designware-pcie.txt ++ ++- clocks: ++ Usage: required ++ Value type: ++ Definition: List of phandle and clock specifier pairs as listed ++ in clock-names property ++ ++- clock-names: ++ Usage: required ++ Value type: ++ Definition: Should contain the following entries ++ * should be populated for v0 and v1 ++ - "iface" Configuration AHB clock ++ ++ * should be populated for v0 ++ - "core" Clocks the pcie hw block ++ - "phy" Clocks the pcie PHY block ++ ++ * should be populated for v1 ++ - "aux" Auxiliary (AUX) clock ++ - "bus_master" Master AXI clock ++ - "bus_slave" Slave AXI clock ++ ++- resets: ++ Usage: required ++ Value type: ++ Definition: List of phandle and reset specifier pairs as listed ++ in reset-names property ++ ++- reset-names: ++ Usage: required ++ Value type: ++ Definition: Should contain the following entries ++ * should be populated for v0 ++ - "axi" AXI reset ++ - "ahb" AHB reset ++ - "por" POR reset ++ - "pci" PCI reset ++ - "phy" PHY reset ++ ++ * should be populated for v1 ++ - "core" Core reset ++ ++- power-domains: ++ Usage: required (for v1 only) ++ Value type: ++ Definition: A phandle and power domain specifier pair to the ++ power domain which is responsible for collapsing ++ and restoring power to the peripheral ++ ++- -supply: ++ Usage: required ++ Value type: ++ Definition: List of phandles to the power supply regulator(s) ++ * should be populated for v0 and v1 ++ - "vdda" core analog power supply ++ ++ * should be populated for v0 ++ - "vdda_phy" analog power supply for PHY ++ - "vdda_refclk" analog power supply for IC which generate ++ reference clock ++ ++- phys: ++ Usage: required (for v1 only) ++ Value type: ++ Definition: List of phandle(s) as listed in phy-names property ++ ++- phy-names: ++ Usage: required (for v1 only) ++ Value type: ++ Definition: Should contain "pciephy" ++ ++- -gpio: ++ Usage: optional ++ Value type: ++ Definition: List of phandle and gpio specifier pairs. Should contain ++ - "perst" PCIe endpoint reset signal line ++ - "pewake" PCIe endpoint wake signal line ++ ++- pinctrl-0: ++ Usage: required ++ Value type: ++ Definition: List of phandles pointing at a pin(s) configuration ++ ++- pinctrl-names ++ Usage: required ++ Value type: ++ Definition: List of names of pinctrl-0 state ++ ++* Example for v0 ++ pcie0: pci@1b500000 { ++ compatible = "qcom,pcie-v0"; ++ reg = <0x1b500000 0x1000 ++ 0x1b502000 0x80 ++ 0x1b600000 0x100 ++ 0x0ff00000 0x100000>; ++ reg-names = "dbi", "elbi", "parf", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <0>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ ++ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* memory */ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ clocks = <&gcc PCIE_A_CLK>, ++ <&gcc PCIE_H_CLK>, ++ <&gcc PCIE_PHY_CLK>; ++ clock-names = "core", "iface", "phy"; ++ resets = <&gcc PCIE_ACLK_RESET>, ++ <&gcc PCIE_HCLK_RESET>, ++ <&gcc PCIE_POR_RESET>, ++ <&gcc PCIE_PCI_RESET>, ++ <&gcc PCIE_PHY_RESET>; ++ reset-names = "axi", "ahb", "por", "pci", "phy"; ++ }; ++ ++* Example for v1 ++ pcie0@fc520000 { ++ compatible = "qcom,pcie-v1"; ++ reg = <0xfc520000 0x2000>, ++ <0xff000000 0x1000>, ++ <0xff001000 0x1000>, ++ <0xff002000 0x2000>; ++ reg-names = "parf", "dbi", "elbi", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <0>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */ ++ 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, ++ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, ++ <&gcc GCC_PCIE_0_SLV_AXI_CLK>, ++ <&gcc GCC_PCIE_0_AUX_CLK>; ++ clock-names = "iface", "master_bus", "slave_bus", "aux"; ++ resets = <&gcc GCC_PCIE_0_BCR>; ++ reset-names = "core"; ++ power-domains = <&gcc PCIE0_GDSC>; ++ vdda-supply = <&pma8084_l3>; ++ phys = <&pciephy0>; ++ phy-names = "pciephy"; ++ perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>; ++ pinctrl-0 = <&pcie0_pins_default>; ++ pinctrl-names = "default"; ++ }; diff --git a/target/linux/ipq806x/patches-4.0/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch b/target/linux/ipq806x/patches-4.0/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch new file mode 100644 index 0000000000..b64b759a34 --- /dev/null +++ b/target/linux/ipq806x/patches-4.0/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch @@ -0,0 +1,753 @@ +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v2,4/5] PCI: qcom: Add Qualcomm PCIe controller driver +From: Stanimir Varbanov +X-Patchwork-Id: 6326161 +Message-Id: <1430743338-10441-5-git-send-email-svarbanov@mm-sol.com> +To: Rob Herring , Kumar Gala , + Mark Rutland , + Grant Likely , + Bjorn Helgaas , + Kishon Vijay Abraham I , + Russell King , Arnd Bergmann +Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, + linux-pci@vger.kernel.org, Mathieu Olivari , + Srinivas Kandagatla , + Stanimir Varbanov +Date: Mon, 4 May 2015 15:42:17 +0300 + +The PCIe driver reuse the Designware common code for host +and MSI initialization, and also program the Qualcomm +application specific registers. + +Signed-off-by: Stanimir Varbanov + +--- +MAINTAINERS | 7 + + drivers/pci/host/Kconfig | 9 + + drivers/pci/host/Makefile | 1 + + drivers/pci/host/pcie-qcom.c | 677 ++++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 694 insertions(+), 0 deletions(-) + create mode 100644 drivers/pci/host/pcie-qcom.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -7511,6 +7511,13 @@ L: linux-pci@vger.kernel.org + S: Maintained + F: drivers/pci/host/*spear* + ++PCIE DRIVER FOR QUALCOMM MSM ++M: Stanimir Varbanov ++L: linux-pci@vger.kernel.org ++L: linux-arm-msm@vger.kernel.org ++S: Maintained ++F: drivers/pci/host/*qcom* ++ + PCMCIA SUBSYSTEM + P: Linux PCMCIA Team + L: linux-pcmcia@lists.infradead.org +--- a/drivers/pci/host/Kconfig ++++ b/drivers/pci/host/Kconfig +@@ -106,4 +106,13 @@ config PCI_VERSATILE + bool "ARM Versatile PB PCI controller" + depends on ARCH_VERSATILE + ++config PCIE_QCOM ++ bool "Qualcomm PCIe controller" ++ depends on ARCH_QCOM && OF || (ARM && COMPILE_TEST) ++ select PCIE_DW ++ select PCIEPORTBUS ++ help ++ Say Y here to enable PCIe controller support on Qualcomm SoCs. The ++ PCIe controller use Designware core plus Qualcomm specific hardware ++ wrappers. + endmenu +--- /dev/null ++++ b/drivers/pci/host/pcie-qcom.c +@@ -0,0 +1,677 @@ ++/* ++ * Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-designware.h" ++ ++#define PCIE20_PARF_PHY_CTRL 0x40 ++#define PCIE20_PARF_PHY_REFCLK 0x4C ++#define PCIE20_PARF_DBI_BASE_ADDR 0x168 ++#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c ++#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 ++ ++#define PCIE20_ELBI_SYS_CTRL 0x04 ++#define PCIE20_ELBI_SYS_STTS 0x08 ++#define XMLH_LINK_UP BIT(10) ++ ++#define PCIE20_CAP 0x70 ++#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10) ++ ++#define PERST_DELAY_MIN_US 1000 ++#define PERST_DELAY_MAX_US 1005 ++ ++#define LINKUP_DELAY_MIN_US 5000 ++#define LINKUP_DELAY_MAX_US 5100 ++#define LINKUP_RETRIES_COUNT 20 ++ ++#define PCIE_V0 0 /* apq8064 */ ++#define PCIE_V1 1 /* apq8084 */ ++ ++struct qcom_pcie_resources_v0 { ++ struct clk *iface_clk; ++ struct clk *core_clk; ++ struct clk *phy_clk; ++ struct reset_control *pci_reset; ++ struct reset_control *axi_reset; ++ struct reset_control *ahb_reset; ++ struct reset_control *por_reset; ++ struct reset_control *phy_reset; ++ struct regulator *vdda; ++ struct regulator *vdda_phy; ++ struct regulator *vdda_refclk; ++}; ++ ++struct qcom_pcie_resources_v1 { ++ struct clk *iface; ++ struct clk *aux; ++ struct clk *master_bus; ++ struct clk *slave_bus; ++ struct reset_control *core; ++ struct regulator *vdda; ++}; ++ ++union pcie_resources { ++ struct qcom_pcie_resources_v0 v0; ++ struct qcom_pcie_resources_v1 v1; ++}; ++ ++struct qcom_pcie { ++ struct pcie_port pp; ++ struct device *dev; ++ union pcie_resources res; ++ void __iomem *parf; ++ void __iomem *dbi; ++ void __iomem *elbi; ++ struct phy *phy; ++ struct gpio_desc *reset; ++ unsigned int version; ++}; ++ ++#define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp) ++ ++static inline void ++writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask) ++{ ++ u32 val = readl(addr); ++ ++ val &= ~clear_mask; ++ val |= set_mask; ++ writel(val, addr); ++} ++ ++static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert) ++{ ++ int val, active_low; ++ ++ if (IS_ERR_OR_NULL(pcie->reset)) ++ return; ++ ++ active_low = gpiod_is_active_low(pcie->reset); ++ ++ if (assert) ++ val = !!active_low; ++ else ++ val = !active_low; ++ ++ gpiod_set_value(pcie->reset, val); ++ ++ usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US); ++} ++ ++static void qcom_ep_reset_assert(struct qcom_pcie *pcie) ++{ ++ qcom_ep_reset_assert_deassert(pcie, 1); ++} ++ ++static void qcom_ep_reset_deassert(struct qcom_pcie *pcie) ++{ ++ qcom_ep_reset_assert_deassert(pcie, 0); ++} ++ ++static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg) ++{ ++ struct pcie_port *pp = arg; ++ ++ return dw_handle_msi_irq(pp); ++} ++ ++static int qcom_pcie_link_up(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ u32 val = readl(pcie->dbi + PCIE20_CAP_LINKCTRLSTATUS); ++ ++ return val & BIT(29) ? 1 : 0; ++} ++ ++static void qcom_pcie_disable_resources_v0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v0 *res = &pcie->res.v0; ++ ++ reset_control_assert(res->pci_reset); ++ reset_control_assert(res->axi_reset); ++ reset_control_assert(res->ahb_reset); ++ reset_control_assert(res->por_reset); ++ reset_control_assert(res->pci_reset); ++ clk_disable_unprepare(res->iface_clk); ++ clk_disable_unprepare(res->core_clk); ++ clk_disable_unprepare(res->phy_clk); ++ regulator_disable(res->vdda); ++ regulator_disable(res->vdda_phy); ++ regulator_disable(res->vdda_refclk); ++} ++ ++static void qcom_pcie_disable_resources_v1(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v1 *res = &pcie->res.v1; ++ ++ reset_control_assert(res->core); ++ clk_disable_unprepare(res->slave_bus); ++ clk_disable_unprepare(res->master_bus); ++ clk_disable_unprepare(res->iface); ++ clk_disable_unprepare(res->aux); ++ regulator_disable(res->vdda); ++} ++ ++static int qcom_pcie_enable_resources_v0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v0 *res = &pcie->res.v0; ++ struct device *dev = pcie->dev; ++ int ret; ++ ++ ret = regulator_enable(res->vdda); ++ if (ret) { ++ dev_err(dev, "cannot enable vdda regulator\n"); ++ return ret; ++ } ++ ++ ret = regulator_enable(res->vdda_refclk); ++ if (ret) { ++ dev_err(dev, "cannot enable vdda_refclk regulator\n"); ++ goto err_refclk; ++ } ++ ++ ret = regulator_enable(res->vdda_phy); ++ if (ret) { ++ dev_err(dev, "cannot enable vdda_phy regulator\n"); ++ goto err_vdda_phy; ++ } ++ ++ ret = clk_prepare_enable(res->iface_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable iface clock\n"); ++ goto err_iface; ++ } ++ ++ ret = clk_prepare_enable(res->core_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable core clock\n"); ++ goto err_clk_core; ++ } ++ ++ ret = clk_prepare_enable(res->phy_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable phy clock\n"); ++ goto err_clk_phy; ++ } ++ ++ ret = reset_control_deassert(res->ahb_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert ahb reset\n"); ++ goto err_reset_ahb; ++ } ++ ++ return 0; ++ ++err_reset_ahb: ++ clk_disable_unprepare(res->phy_clk); ++err_clk_phy: ++ clk_disable_unprepare(res->core_clk); ++err_clk_core: ++ clk_disable_unprepare(res->iface_clk); ++err_iface: ++ regulator_disable(res->vdda_phy); ++err_vdda_phy: ++ regulator_disable(res->vdda_refclk); ++err_refclk: ++ regulator_disable(res->vdda); ++ return ret; ++} ++ ++static int qcom_pcie_enable_resources_v1(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v1 *res = &pcie->res.v1; ++ struct device *dev = pcie->dev; ++ int ret; ++ ++ ret = reset_control_deassert(res->core); ++ if (ret) { ++ dev_err(dev, "cannot deassert core reset\n"); ++ return ret; ++ } ++ ++ ret = clk_prepare_enable(res->aux); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable aux clock\n"); ++ goto err_res; ++ } ++ ++ ret = clk_prepare_enable(res->iface); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable iface clock\n"); ++ goto err_aux; ++ } ++ ++ ret = clk_prepare_enable(res->master_bus); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable master_bus clock\n"); ++ goto err_iface; ++ } ++ ++ ret = clk_prepare_enable(res->slave_bus); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable slave_bus clock\n"); ++ goto err_master; ++ } ++ ++ ret = regulator_enable(res->vdda); ++ if (ret) { ++ dev_err(dev, "cannot enable vdda regulator\n"); ++ goto err_slave; ++ } ++ ++ return 0; ++ ++err_slave: ++ clk_disable_unprepare(res->slave_bus); ++err_master: ++ clk_disable_unprepare(res->master_bus); ++err_iface: ++ clk_disable_unprepare(res->iface); ++err_aux: ++ clk_disable_unprepare(res->aux); ++err_res: ++ reset_control_assert(res->core); ++ ++ return ret; ++} ++ ++static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v0 *res = &pcie->res.v0; ++ struct device *dev = pcie->dev; ++ ++ res->vdda = devm_regulator_get(dev, "vdda"); ++ if (IS_ERR(res->vdda)) ++ return PTR_ERR(res->vdda); ++ ++ res->vdda_phy = devm_regulator_get(dev, "vdda_phy"); ++ if (IS_ERR(res->vdda_phy)) ++ return PTR_ERR(res->vdda_phy); ++ ++ res->vdda_refclk = devm_regulator_get(dev, "vdda_refclk"); ++ if (IS_ERR(res->vdda_refclk)) ++ return PTR_ERR(res->vdda_refclk); ++ ++ res->iface_clk = devm_clk_get(dev, "iface"); ++ if (IS_ERR(res->iface_clk)) ++ return PTR_ERR(res->iface_clk); ++ ++ res->core_clk = devm_clk_get(dev, "core"); ++ if (IS_ERR(res->core_clk)) ++ return PTR_ERR(res->core_clk); ++ ++ res->phy_clk = devm_clk_get(dev, "phy"); ++ if (IS_ERR(res->phy_clk)) ++ return PTR_ERR(res->phy_clk); ++ ++ res->pci_reset = devm_reset_control_get(dev, "pci"); ++ if (IS_ERR(res->pci_reset)) ++ return PTR_ERR(res->pci_reset); ++ ++ res->axi_reset = devm_reset_control_get(dev, "axi"); ++ if (IS_ERR(res->axi_reset)) ++ return PTR_ERR(res->axi_reset); ++ ++ res->ahb_reset = devm_reset_control_get(dev, "ahb"); ++ if (IS_ERR(res->ahb_reset)) ++ return PTR_ERR(res->ahb_reset); ++ ++ res->por_reset = devm_reset_control_get(dev, "por"); ++ if (IS_ERR(res->por_reset)) ++ return PTR_ERR(res->por_reset); ++ ++ res->phy_reset = devm_reset_control_get(dev, "phy"); ++ if (IS_ERR(res->phy_reset)) ++ return PTR_ERR(res->phy_reset); ++ ++ return 0; ++} ++ ++static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_v1 *res = &pcie->res.v1; ++ struct device *dev = pcie->dev; ++ ++ res->vdda = devm_regulator_get(dev, "vdda"); ++ if (IS_ERR(res->vdda)) ++ return PTR_ERR(res->vdda); ++ ++ res->iface = devm_clk_get(dev, "iface"); ++ if (IS_ERR(res->iface)) ++ return PTR_ERR(res->iface); ++ ++ res->aux = devm_clk_get(dev, "aux"); ++ if (IS_ERR(res->aux) && PTR_ERR(res->aux) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; ++ else if (IS_ERR(res->aux)) ++ res->aux = NULL; ++ ++ res->master_bus = devm_clk_get(dev, "master_bus"); ++ if (IS_ERR(res->master_bus)) ++ return PTR_ERR(res->master_bus); ++ ++ res->slave_bus = devm_clk_get(dev, "slave_bus"); ++ if (IS_ERR(res->slave_bus)) ++ return PTR_ERR(res->slave_bus); ++ ++ res->core = devm_reset_control_get(dev, "core"); ++ if (IS_ERR(res->core)) ++ return PTR_ERR(res->core); ++ ++ return 0; ++} ++ ++static int qcom_pcie_enable_link_training(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ struct device *dev = pp->dev; ++ int retries; ++ u32 val; ++ ++ /* enable link training */ ++ writel_masked(pcie->elbi + PCIE20_ELBI_SYS_CTRL, 0, BIT(0)); ++ ++ /* wait for up to 100ms for the link to come up */ ++ retries = LINKUP_RETRIES_COUNT; ++ do { ++ val = readl(pcie->elbi + PCIE20_ELBI_SYS_STTS); ++ if (val & XMLH_LINK_UP) ++ break; ++ usleep_range(LINKUP_DELAY_MIN_US, LINKUP_DELAY_MAX_US); ++ } while (retries--); ++ ++ if (retries < 0 || !dw_pcie_link_up(pp)) { ++ dev_err(dev, "link initialization failed\n"); ++ return -ENXIO; ++ } ++ ++ return 0; ++} ++ ++static void qcom_pcie_host_init_v1(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ int ret; ++ ++ qcom_ep_reset_assert(pcie); ++ ++ ret = qcom_pcie_enable_resources_v1(pcie); ++ if (ret) ++ return; ++ ++ /* change DBI base address */ ++ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); ++ ++ if (IS_ENABLED(CONFIG_PCI_MSI)) ++ writel_masked(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT, ++ 0, BIT(31)); ++ ++ ret = phy_init(pcie->phy); ++ if (ret) ++ goto err_res; ++ ++ ret = phy_power_on(pcie->phy); ++ if (ret) ++ goto err_phy; ++ ++ dw_pcie_setup_rc(pp); ++ ++ if (IS_ENABLED(CONFIG_PCI_MSI)) ++ dw_pcie_msi_init(pp); ++ ++ qcom_ep_reset_deassert(pcie); ++ ++ ret = qcom_pcie_enable_link_training(pp); ++ if (ret) ++ goto err; ++ ++ return; ++ ++err: ++ qcom_ep_reset_assert(pcie); ++ phy_power_off(pcie->phy); ++err_phy: ++ phy_exit(pcie->phy); ++err_res: ++ qcom_pcie_disable_resources_v1(pcie); ++} ++ ++static void qcom_pcie_host_init_v0(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ struct qcom_pcie_resources_v0 *res = &pcie->res.v0; ++ struct device *dev = pcie->dev; ++ int ret; ++ ++ qcom_ep_reset_assert(pcie); ++ ++ ret = qcom_pcie_enable_resources_v0(pcie); ++ if (ret) ++ return; ++ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0); ++ ++ /* enable external reference clock */ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16)); ++ ++ ret = reset_control_deassert(res->phy_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert phy reset\n"); ++ return; ++ } ++ ++ ret = reset_control_deassert(res->pci_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert pci reset\n"); ++ return; ++ } ++ ++ ret = reset_control_deassert(res->por_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert por reset\n"); ++ return; ++ } ++ ++ ret = reset_control_deassert(res->axi_reset); ++ if (ret) { ++ dev_err(dev, "cannot deassert axi reset\n"); ++ return; ++ } ++ ++ /* wait 150ms for clock acquisition */ ++ usleep_range(10000, 15000); ++ ++ dw_pcie_setup_rc(pp); ++ ++ if (IS_ENABLED(CONFIG_PCI_MSI)) ++ dw_pcie_msi_init(pp); ++ ++ qcom_ep_reset_deassert(pcie); ++ ++ ret = qcom_pcie_enable_link_training(pp); ++ if (ret) ++ goto err; ++ ++ return; ++err: ++ qcom_ep_reset_assert(pcie); ++ qcom_pcie_disable_resources_v0(pcie); ++} ++ ++static void qcom_pcie_host_init(struct pcie_port *pp) ++{ ++ struct qcom_pcie *pcie = to_qcom_pcie(pp); ++ ++ if (pcie->version == PCIE_V0) ++ return qcom_pcie_host_init_v0(pp); ++ else ++ return qcom_pcie_host_init_v1(pp); ++} ++ ++static int ++qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val) ++{ ++ /* the device class is not reported correctly from the register */ ++ if (where == PCI_CLASS_REVISION && size == 4) { ++ *val = readl(pp->dbi_base + PCI_CLASS_REVISION); ++ *val &= ~(0xffff << 16); ++ *val |= PCI_CLASS_BRIDGE_PCI << 16; ++ return PCIBIOS_SUCCESSFUL; ++ } ++ ++ return dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where, ++ size, val); ++} ++ ++static struct pcie_host_ops qcom_pcie_ops = { ++ .link_up = qcom_pcie_link_up, ++ .host_init = qcom_pcie_host_init, ++ .rd_own_conf = qcom_pcie_rd_own_conf, ++}; ++ ++static const struct of_device_id qcom_pcie_match[] = { ++ { .compatible = "qcom,pcie-v0", .data = (void *)PCIE_V0 }, ++ { .compatible = "qcom,pcie-v1", .data = (void *)PCIE_V1 }, ++ { } ++}; ++ ++static int qcom_pcie_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ const struct of_device_id *match; ++ struct resource *res; ++ struct qcom_pcie *pcie; ++ struct pcie_port *pp; ++ int ret; ++ ++ match = of_match_node(qcom_pcie_match, dev->of_node); ++ if (!match) ++ return -ENXIO; ++ ++ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); ++ if (!pcie) ++ return -ENOMEM; ++ ++ pcie->version = (unsigned int)match->data; ++ ++ pcie->reset = devm_gpiod_get_optional(dev, "perst"); ++ if (IS_ERR(pcie->reset) && PTR_ERR(pcie->reset) == -EPROBE_DEFER) ++ return PTR_ERR(pcie->reset); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); ++ pcie->parf = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pcie->parf)) ++ return PTR_ERR(pcie->parf); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); ++ pcie->dbi = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pcie->dbi)) ++ return PTR_ERR(pcie->dbi); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi"); ++ pcie->elbi = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pcie->elbi)) ++ return PTR_ERR(pcie->elbi); ++ ++ pcie->phy = devm_phy_optional_get(dev, "pciephy"); ++ if (IS_ERR(pcie->phy)) ++ return PTR_ERR(pcie->phy); ++ ++ pcie->dev = dev; ++ ++ if (pcie->version == PCIE_V0) ++ ret = qcom_pcie_get_resources_v0(pcie); ++ else ++ ret = qcom_pcie_get_resources_v1(pcie); ++ ++ if (ret) ++ return ret; ++ ++ pp = &pcie->pp; ++ pp->dev = dev; ++ pp->dbi_base = pcie->dbi; ++ pp->root_bus_nr = -1; ++ pp->ops = &qcom_pcie_ops; ++ ++ if (IS_ENABLED(CONFIG_PCI_MSI)) { ++ pp->msi_irq = platform_get_irq_byname(pdev, "msi"); ++ if (pp->msi_irq < 0) { ++ dev_err(dev, "cannot get msi irq\n"); ++ return pp->msi_irq; ++ } ++ ++ ret = devm_request_irq(dev, pp->msi_irq, ++ qcom_pcie_msi_irq_handler, ++ IRQF_SHARED, "qcom-pcie-msi", pp); ++ if (ret) { ++ dev_err(dev, "cannot request msi irq\n"); ++ return ret; ++ } ++ } ++ ++ ret = dw_pcie_host_init(pp); ++ if (ret) { ++ dev_err(dev, "cannot initialize host\n"); ++ return ret; ++ } ++ ++ platform_set_drvdata(pdev, pcie); ++ ++ return 0; ++} ++ ++static int qcom_pcie_remove(struct platform_device *pdev) ++{ ++ struct qcom_pcie *pcie = platform_get_drvdata(pdev); ++ ++ qcom_ep_reset_assert(pcie); ++ phy_power_off(pcie->phy); ++ phy_exit(pcie->phy); ++ if (pcie->version == PCIE_V0) ++ qcom_pcie_disable_resources_v0(pcie); ++ else ++ qcom_pcie_disable_resources_v1(pcie); ++ ++ return 0; ++} ++ ++static struct platform_driver qcom_pcie_driver = { ++ .probe = qcom_pcie_probe, ++ .remove = qcom_pcie_remove, ++ .driver = { ++ .name = "qcom-pcie", ++ .of_match_table = qcom_pcie_match, ++ }, ++}; ++ ++module_platform_driver(qcom_pcie_driver); ++ ++MODULE_AUTHOR("Stanimir Varbanov "); ++MODULE_DESCRIPTION("Qualcomm PCIe root complex driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:qcom-pcie"); +--- a/drivers/pci/host/Makefile ++++ b/drivers/pci/host/Makefile +@@ -13,3 +13,4 @@ obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx + obj-$(CONFIG_PCI_XGENE) += pci-xgene.o + obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o + obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o ++obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o diff --git a/target/linux/ipq806x/patches-4.0/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.0/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch new file mode 100644 index 0000000000..593bc32790 --- /dev/null +++ b/target/linux/ipq806x/patches-4.0/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch @@ -0,0 +1,260 @@ +From 5b40516b2f5fb9b2a7d6d3e2e924f12ec9d183a8 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Tue, 21 Apr 2015 19:01:42 -0700 +Subject: [PATCH 8/9] ARM: dts: qcom: add pcie nodes to ipq806x platforms + +qcom-pcie driver now supports version 0 of the controller. This change +adds the corresponding entries to the IPQ806x dtsi file and +corresponding platform (AP148). + +Signed-off-by: Mathieu Olivari +--- + arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 30 ++++++++ + arch/arm/boot/dts/qcom-ipq8064.dtsi | 124 +++++++++++++++++++++++++++++++ + 2 files changed, 154 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +@@ -30,6 +30,22 @@ + bias-disable; + }; + ++ pcie1_pins: pcie1_pinmux { ++ mux { ++ pins = "gpio3"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ ++ pcie2_pins: pcie2_pinmux { ++ mux { ++ pins = "gpio48"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; +@@ -112,5 +128,19 @@ + sata@29000000 { + status = "ok"; + }; ++ ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 3 0>; ++ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 48 0>; ++ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-names = "default"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +@@ -37,6 +37,30 @@ + bias-disable; + }; + ++ pcie1_pins: pcie1_pinmux { ++ mux { ++ pins = "gpio3"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ ++ pcie2_pins: pcie2_pinmux { ++ mux { ++ pins = "gpio48"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ ++ pcie3_pins: pcie3_pinmux { ++ mux { ++ pins = "gpio63"; ++ drive-strength = <2>; ++ bias-disable; ++ }; ++ }; ++ + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; +@@ -153,6 +177,27 @@ + status = "ok"; + }; + ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 3 0>; ++ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 48 0>; ++ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ pcie2: pci@1b900000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 63 0>; ++ pinctrl-0 = <&pcie3_pins>; ++ pinctrl-names = "default"; ++ }; ++ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -3,6 +3,7 @@ + #include "skeleton.dtsi" + #include + #include ++#include + + / { + model = "Qualcomm IPQ8064"; +@@ -291,5 +292,128 @@ + #clock-cells = <1>; + #reset-cells = <1>; + }; ++ ++ pcie0: pci@1b500000 { ++ compatible = "qcom,pcie-v0"; ++ reg = <0x1b500000 0x1000 ++ 0x1b502000 0x80 ++ 0x1b600000 0x100 ++ 0x0ff00000 0x100000>; ++ reg-names = "dbi", "elbi", "parf", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <0>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* downstream I/O */ ++ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ ++ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ ++ clocks = <&gcc PCIE_A_CLK>, ++ <&gcc PCIE_H_CLK>, ++ <&gcc PCIE_PHY_CLK>; ++ clock-names = "core", "iface", "phy"; ++ ++ resets = <&gcc PCIE_ACLK_RESET>, ++ <&gcc PCIE_HCLK_RESET>, ++ <&gcc PCIE_POR_RESET>, ++ <&gcc PCIE_PCI_RESET>, ++ <&gcc PCIE_PHY_RESET>; ++ reset-names = "axi", "ahb", "por", "pci", "phy"; ++ ++ status = "disabled"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ compatible = "qcom,pcie-v0"; ++ reg = <0x1b700000 0x1000 ++ 0x1b702000 0x80 ++ 0x1b800000 0x100 ++ 0x31f00000 0x100000>; ++ reg-names = "dbi", "elbi", "parf", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <1>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ranges = <0x81000000 0 0 0x31e00000 0 0x00100000 /* downstream I/O */ ++ 0x82000000 0 0x00000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ ++ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ ++ clocks = <&gcc PCIE_1_A_CLK>, ++ <&gcc PCIE_1_H_CLK>, ++ <&gcc PCIE_1_PHY_CLK>; ++ clock-names = "core", "iface", "phy"; ++ ++ resets = <&gcc PCIE_1_ACLK_RESET>, ++ <&gcc PCIE_1_HCLK_RESET>, ++ <&gcc PCIE_1_POR_RESET>, ++ <&gcc PCIE_1_PCI_RESET>, ++ <&gcc PCIE_1_PHY_RESET>; ++ reset-names = "axi", "ahb", "por", "pci", "phy"; ++ ++ status = "disabled"; ++ }; ++ ++ pcie2: pci@1b900000 { ++ compatible = "qcom,pcie-v0"; ++ reg = <0x1b900000 0x1000 ++ 0x1b902000 0x80 ++ 0x1ba00000 0x100 ++ 0x35f00000 0x100000>; ++ reg-names = "dbi", "elbi", "parf", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <2>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ranges = <0x81000000 0 0 0x35e00000 0 0x00100000 /* downstream I/O */ ++ 0x82000000 0 0x00000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ ++ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ ++ clocks = <&gcc PCIE_2_A_CLK>, ++ <&gcc PCIE_2_H_CLK>, ++ <&gcc PCIE_2_PHY_CLK>; ++ clock-names = "core", "iface", "phy"; ++ ++ resets = <&gcc PCIE_2_ACLK_RESET>, ++ <&gcc PCIE_2_HCLK_RESET>, ++ <&gcc PCIE_2_POR_RESET>, ++ <&gcc PCIE_2_PCI_RESET>, ++ <&gcc PCIE_2_PHY_RESET>; ++ reset-names = "axi", "ahb", "por", "pci", "phy"; ++ ++ status = "disabled"; ++ }; + }; + }; diff --git a/target/linux/ipq806x/patches-4.0/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-4.0/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch new file mode 100644 index 0000000000..e2d31354ed --- /dev/null +++ b/target/linux/ipq806x/patches-4.0/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch @@ -0,0 +1,29 @@ +From f004aa1dec6e2e206be025de15b115d60f2b21e3 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Tue, 21 Apr 2015 19:09:07 -0700 +Subject: [PATCH 9/9] ARM: qcom: automatically select PCI_DOMAINS if PCI is + enabled + +If multiple PCIe devices are present in the system, the kernel will +panic at boot time when trying to scan the PCI buses. This happens on +IPQ806x based platforms, which has 3 PCIe ports. + +Enabling this option allows the kernel to assign the pci-domains +according to the device-tree content. This allows multiple PCIe +controllers to coexist in the system. + +Signed-off-by: Mathieu Olivari +--- + arch/arm/mach-qcom/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/mach-qcom/Kconfig ++++ b/arch/arm/mach-qcom/Kconfig +@@ -5,6 +5,7 @@ menuconfig ARCH_QCOM + select ARM_AMBA + select PINCTRL + select QCOM_SCM if SMP ++ select PCI_DOMAINS if PCI + help + Support for Qualcomm's devicetree based systems. + diff --git a/target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch b/target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch index 89ebe66946..16defd135d 100644 --- a/target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch +++ b/target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch @@ -1,7 +1,7 @@ --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -18,8 +18,15 @@ - bootargs = "console=ttyMSM0,115200 root=/dev/mtdblock12 rootfstype=squashfs,jffs2"; +@@ -22,8 +22,15 @@ + linux,stdout-path = "serial0:115200n8"; }; + aliases { @@ -16,7 +16,7 @@ i2c4_pins: i2c4_pinmux { pins = "gpio12", "gpio13"; function = "gsbi4"; -@@ -34,6 +41,25 @@ +@@ -54,6 +61,25 @@ bias-none; }; }; @@ -42,17 +42,17 @@ }; gsbi@16300000 { -@@ -72,6 +98,7 @@ +@@ -92,6 +118,7 @@ #size-cells = <1>; spi-max-frequency = <50000000>; reg = <0>; + m25p,fast-read; partition@0 { - label = "0:SBL1"; -@@ -148,5 +175,66 @@ - sata@29000000 { - status = "ok"; + label = "lowlevel_init"; +@@ -142,5 +169,66 @@ + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; }; + + mdio0: mdio { @@ -119,17 +119,17 @@ }; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -3,6 +3,7 @@ - #include "skeleton.dtsi" +@@ -4,6 +4,7 @@ #include #include + #include +#include / { model = "Qualcomm IPQ8064"; -@@ -279,5 +280,42 @@ - #clock-cells = <1>; - #reset-cells = <1>; +@@ -415,5 +416,42 @@ + + status = "disabled"; }; + + nss-gmac-common { -- 2.25.1