From 0db9e471ea53b48687ea247c855cd95ec453530c Mon Sep 17 00:00:00 2001 From: Guus Sliepen Date: Sun, 14 Oct 2012 19:22:30 +0200 Subject: [PATCH] Releasing 1.1pre3. --- NEWS | 26 ++++++++++++++- README | 89 ++++++++++++++++++++++------------------------------ configure.in | 2 +- 3 files changed, 63 insertions(+), 54 deletions(-) diff --git a/NEWS b/NEWS index 191c2f2..806f2b7 100644 --- a/NEWS +++ b/NEWS @@ -1,4 +1,28 @@ -Version 1.1pre2 Juli 17 2011 +Version 1.1pre3 October 14 2012 + + * New experimental protocol: + * Uses 521 bit ECDSA keys for authentication. + * Uses AES-256-CTR and HMAC-SHA256. + * Always provides perfect forward secrecy. + * Used for both meta-connections and VPN packets. + * VPN packets are encrypted end-to-end. + + * Many improvements to tincctl: + * "config" command shows/adds/changes configuration variables. + * "export" and "import" commands help exchange configuration files. + * "init" command sets up initial configuration files. + * "info" command shows details about a node, subnet or address. + * "log" command shows live log messages. + * Without a command it acts as a shell, with history and TAB completion. + * Improved starting/stopping tincd. + * Improved graph output. + + * When trying to directly send UDP packets to a node for which multiple + addresses are known, all of them are tried. + + * Many small fixes, code cleanups and documentation updates. + +Version 1.1pre2 July 17 2011 * .cookie files are renamed to .pid files, which are compatible with 1.0.x. diff --git a/README b/README index ec7653b..10cb0b5 100644 --- a/README +++ b/README @@ -1,4 +1,4 @@ -This is the README file for tinc version 1.1pre2. Installation +This is the README file for tinc version 1.1pre3. Installation instructions may be found in the INSTALL file. tinc is Copyright (C) 1998-2012 by: @@ -29,81 +29,66 @@ protocol is not fixed yet. Security statement ------------------ -This version uses an experimental and unfinished cryptographic protocol. Use -it at your own risk. +This version uses an experimental and unfinished cryptographic protocol. Use it +at your own risk. Compatibility ------------- -Version 1.1pre2 is compatible with 1.0pre8, 1.0 and later, but not with older +Version 1.1pre3 is compatible with 1.0pre8, 1.0 and later, but not with older versions of tinc. When the ExperimentalProtocol option is used, tinc is still compatible with -1.0.X and 1.1pre2 itself, but not with any other 1.1preX version. +1.0.X and 1.1pre3 itself, but not with any other 1.1preX version. Requirements ------------ -OpenSSL (http://www.openssl.org/) version 1.0.0 or later. - -The zlib library is used for optional compression. You can find it at -http://www.gzip.org/zlib/. +In order to compile tinc, you will need a GNU C compiler environment. Please +ensure you have the latest stable versions of all the required libraries: -The lzo library is also used for optional compression. You can find it at -http://www.oberhumer.com/opensource/lzo/. +- OpenSSL (http://www.openssl.org/) version 1.0.0 or later. +- Libevent (http://monkey.org/~provos/libevent/) -Since 1.1, the libevent library is used for the main event loop. You can find -it at http://monkey.org/~provos/libevent/. +The following libraries are used by default, but can be disabled if necessary: -In order to compile tinc, you will need a GNU C compiler environment. Please -ensure you have the latest stable versions of all the required libraries. +- zlib (http://www.gzip.org/zlib/) +- lzo (http://www.oberhumer.com/opensource/lzo/) +- ncurses (http://invisible-island.net/ncurses/) +- readline (ftp://ftp.gnu.org/pub/gnu/readline/) Features -------- -This version of tinc supports multiple virtual networks at once. To -use this feature, you may supply a netname via the -n or --net -options. The standard locations for the config files will then be -/etc/tinc//. - -tincd regenerates its encryption key pairs. It does this on the first -activity after the keys have expired. This period is adjustable in the -configuration file, and the default time is 3600 seconds (one hour). - -This version supports multiple subnets at once. They are also sorted -on subnet mask size. This means that it is possible to have -overlapping subnets on the VPN, as long as their subnet mask sizes -differ. - -Since pre5, tinc can operate in several routing modes. The default mode, -"router", works exactly like the older version, and uses Subnet lines to -determine the destination of packets. The other two modes, "switch" and "hub", -allow the tinc daemons to work together like a single network switch or hub. -This is useful for bridging networks. The latter modes only work properly on -Linux, FreeBSD and Windows. - -The algorithms used for encryption and generating message authentication codes -can now be changed in the configuration files. All cipher and digest algorithms -supported by OpenSSL can be used. Useful ciphers are "blowfish" (default), -"bf-ofb", "des", "des3", etcetera. Useful digests are "sha1" (default), "md5", -etcetera. - -Support for routing IPv6 packets has been added. Just add Subnet lines with -IPv6 addresses (without using :: abbreviations) and use ifconfig or ip (from -the iproute package) to give the virtual network interface corresponding IPv6 -addresses. tinc does not provide autoconfiguration for IPv6 hosts, if you need -it use radvd or zebra. - -It is also possible to make tunnels to other tinc daemons over IPv6 networks, -if the operating system supports IPv6. tinc will automatically use both IPv6 -and IPv4 when available, but this can be changed by adding the option -"AddressFamily = ipv4" or "AddressFamily = ipv6" to the tinc.conf file. +Tinc is a peer-to-peer VPN daemon that supports VPNs with an arbitrary number +of nodes. Instead of configuring tunnels, you give tinc the location and +public key of a few nodes in the VPN. After making the initial connections to +those nodes, tinc will learn about all other nodes on the VPN, and will make +connections automatically. When direct connections are not possible, data will +be forwarded by intermediate nodes. + +By default, nodes authenticate each other using 2048 bit RSA (or 521 bit +ECDSA*) keys. Traffic is encrypted using Blowfish in CBC mode (or AES-256 in +CTR mode*), authenticated using HMAC-SHA1 (or HMAC-SHA-256*), and is protected +against replay attacks. + +*) When using the ExperimentalProtocol option. + +Tinc fully supports IPv6. + +Tinc can operate in several routing modes. In the default mode, "router", every +node is associated with one or more IPv4 and/or IPv6 Subnets. The other two +modes, "switch" and "hub", let the tinc daemons work together to form a virtual +Ethernet network switch or hub. Normally, when started tinc will detach and run in the background. In a native Windows environment this means tinc will intall itself as a service, which will restart after reboots. To prevent tinc from detaching or running as a service, use the -D option. +The status of the VPN can be queried using the "tincctl" tool, which connects +to a running tinc daemon via a control connection. The same tool also makes it +easy to start and stop tinc, and to change its configuration. diff --git a/configure.in b/configure.in index 5f1902b..5781537 100644 --- a/configure.in +++ b/configure.in @@ -4,7 +4,7 @@ AC_PREREQ(2.61) AC_INIT AC_CONFIG_SRCDIR([src/tincd.c]) AC_GNU_SOURCE -AM_INIT_AUTOMAKE(tinc, 1.1pre2) +AM_INIT_AUTOMAKE(tinc, 1.1pre3) AC_CONFIG_HEADERS([config.h]) AM_MAINTAINER_MODE -- 2.25.1