From caf2233b281c03e3e359061a3dfa537d8a25c273 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Tue, 23 Jan 2018 18:05:21 +0100 Subject: [PATCH] bcm283x: Add pinctrl driver The bcm283x family of SoCs have a GPIO controller that also acts as pinctrl controller. This patch introduces a new pinctrl driver that can actually properly mux devices into their device tree defined pin states and is now the primary owner of the gpio device. The previous GPIO driver gets moved into a subdevice of the pinctrl driver, bound to the same OF node. That way whenever a device asks for pinctrl support, it gets it automatically from the pinctrl driver and GPIO support is still available in the normal command line phase. Signed-off-by: Alexander Graf --- MAINTAINERS | 1 + arch/arm/mach-bcm283x/include/mach/gpio.h | 2 - board/raspberrypi/rpi/rpi.c | 5 +- configs/rpi_0_w_defconfig | 4 + configs/rpi_2_defconfig | 4 + configs/rpi_3_32b_defconfig | 4 + configs/rpi_3_defconfig | 4 + configs/rpi_defconfig | 4 + drivers/gpio/bcm2835_gpio.c | 29 ++-- drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/broadcom/Kconfig | 7 + drivers/pinctrl/broadcom/Makefile | 7 + drivers/pinctrl/broadcom/pinctrl-bcm283x.c | 152 +++++++++++++++++++++ 14 files changed, 202 insertions(+), 23 deletions(-) create mode 100644 drivers/pinctrl/broadcom/Kconfig create mode 100644 drivers/pinctrl/broadcom/Makefile create mode 100644 drivers/pinctrl/broadcom/pinctrl-bcm283x.c diff --git a/MAINTAINERS b/MAINTAINERS index d459153503..aa161c819a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -100,6 +100,7 @@ F: drivers/mmc/bcm2835_sdhci.c F: drivers/serial/serial_bcm283x_mu.c F: drivers/video/bcm2835.c F: include/dm/platform_data/serial_bcm283x_mu.h +F: drivers/pinctrl/broadcom/ ARM FREESCALE IMX M: Stefano Babic diff --git a/arch/arm/mach-bcm283x/include/mach/gpio.h b/arch/arm/mach-bcm283x/include/mach/gpio.h index daaee52f81..7b4ddc9246 100644 --- a/arch/arm/mach-bcm283x/include/mach/gpio.h +++ b/arch/arm/mach-bcm283x/include/mach/gpio.h @@ -61,6 +61,4 @@ struct bcm2835_gpio_platdata { unsigned long base; }; -int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio); - #endif /* _BCM2835_GPIO_H_ */ diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 3b7a54f519..c8924d4362 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -24,6 +24,7 @@ #include #endif #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -430,10 +431,10 @@ static bool rpi_is_serial_active(void) * out whether it is available is to check if the RX pin is muxed. */ - if (uclass_first_device(UCLASS_GPIO, &dev) || !dev) + if (uclass_first_device(UCLASS_PINCTRL, &dev) || !dev) return true; - if (bcm2835_gpio_get_func_id(dev, serial_gpio) != BCM2835_GPIO_ALT5) + if (pinctrl_get_gpio_mux(dev, 0, serial_gpio) != BCM2835_GPIO_ALT5) return false; return true; diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig index 12482944af..8ed7a58659 100644 --- a/configs/rpi_0_w_defconfig +++ b/configs/rpi_0_w_defconfig @@ -32,3 +32,7 @@ CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_PHYS_TO_BUS=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_FULL=y +# CONFIG_PINCTRL_GENERIC is not set +CONFIG_PINCTRL_BCM283X=y diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index c45ffb65af..b30e6e144c 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -32,3 +32,7 @@ CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_PHYS_TO_BUS=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_FULL=y +# CONFIG_PINCTRL_GENERIC is not set +CONFIG_PINCTRL_BCM283X=y diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig index f7aed35797..bb40644064 100644 --- a/configs/rpi_3_32b_defconfig +++ b/configs/rpi_3_32b_defconfig @@ -34,3 +34,7 @@ CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_PHYS_TO_BUS=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_FULL=y +# CONFIG_PINCTRL_GENERIC is not set +CONFIG_PINCTRL_BCM283X=y diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig index 9416e3b8fe..8306bc251d 100644 --- a/configs/rpi_3_defconfig +++ b/configs/rpi_3_defconfig @@ -34,3 +34,7 @@ CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_PHYS_TO_BUS=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_FULL=y +# CONFIG_PINCTRL_GENERIC is not set +CONFIG_PINCTRL_BCM283X=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 3bfa745c2e..a7a079ddab 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -32,3 +32,7 @@ CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_PHYS_TO_BUS=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_FULL=y +# CONFIG_PINCTRL_GENERIC is not set +CONFIG_PINCTRL_BCM283X=y diff --git a/drivers/gpio/bcm2835_gpio.c b/drivers/gpio/bcm2835_gpio.c index beaa21853a..d68f8df32d 100644 --- a/drivers/gpio/bcm2835_gpio.c +++ b/drivers/gpio/bcm2835_gpio.c @@ -7,6 +7,7 @@ #include #include +#include #include #include #include @@ -14,6 +15,7 @@ struct bcm2835_gpios { struct bcm2835_gpio_regs *reg; + struct udevice *pinctrl; }; static int bcm2835_gpio_direction_input(struct udevice *dev, unsigned gpio) @@ -29,7 +31,7 @@ static int bcm2835_gpio_direction_input(struct udevice *dev, unsigned gpio) return 0; } -static int bcm2835_gpio_direction_output(struct udevice *dev, unsigned gpio, +static int bcm2835_gpio_direction_output(struct udevice *dev, unsigned int gpio, int value) { struct bcm2835_gpios *gpios = dev_get_priv(dev); @@ -73,19 +75,12 @@ static int bcm2835_gpio_set_value(struct udevice *dev, unsigned gpio, return 0; } -int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio) -{ - struct bcm2835_gpios *gpios = dev_get_priv(dev); - u32 val; - - val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); - - return (val >> BCM2835_GPIO_FSEL_SHIFT(gpio) & BCM2835_GPIO_FSEL_MASK); -} - static int bcm2835_gpio_get_function(struct udevice *dev, unsigned offset) { - int funcid = bcm2835_gpio_get_func_id(dev, offset); + struct bcm2835_gpios *priv = dev_get_priv(dev); + int funcid; + + funcid = pinctrl_get_gpio_mux(priv->pinctrl, 0, offset); switch (funcid) { case BCM2835_GPIO_OUTPUT: @@ -97,7 +92,6 @@ static int bcm2835_gpio_get_function(struct udevice *dev, unsigned offset) } } - static const struct dm_gpio_ops gpio_bcm2835_ops = { .direction_input = bcm2835_gpio_direction_input, .direction_output = bcm2835_gpio_direction_output, @@ -116,15 +110,13 @@ static int bcm2835_gpio_probe(struct udevice *dev) uc_priv->gpio_count = BCM2835_GPIO_COUNT; gpios->reg = (struct bcm2835_gpio_regs *)plat->base; + /* We know we're spawned by the pinctrl driver */ + gpios->pinctrl = dev->parent; + return 0; } #if CONFIG_IS_ENABLED(OF_CONTROL) -static const struct udevice_id bcm2835_gpio_id[] = { - {.compatible = "brcm,bcm2835-gpio"}, - {} -}; - static int bcm2835_gpio_ofdata_to_platdata(struct udevice *dev) { struct bcm2835_gpio_platdata *plat = dev_get_platdata(dev); @@ -142,7 +134,6 @@ static int bcm2835_gpio_ofdata_to_platdata(struct udevice *dev) U_BOOT_DRIVER(gpio_bcm2835) = { .name = "gpio_bcm2835", .id = UCLASS_GPIO, - .of_match = of_match_ptr(bcm2835_gpio_id), .ofdata_to_platdata = of_match_ptr(bcm2835_gpio_ofdata_to_platdata), .platdata_auto_alloc_size = sizeof(struct bcm2835_gpio_platdata), .ops = &gpio_bcm2835_ops, diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 7e8e4b0b27..0a4dd3c0cf 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -306,5 +306,6 @@ source "drivers/pinctrl/renesas/Kconfig" source "drivers/pinctrl/uniphier/Kconfig" source "drivers/pinctrl/exynos/Kconfig" source "drivers/pinctrl/mvebu/Kconfig" +source "drivers/pinctrl/broadcom/Kconfig" endmenu diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 8c04028dfb..c7135d29f8 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_ARCH_MVEBU) += mvebu/ obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_STI) += pinctrl-sti.o obj-$(CONFIG_PINCTRL_STM32) += pinctrl_stm32.o +obj-y += broadcom/ diff --git a/drivers/pinctrl/broadcom/Kconfig b/drivers/pinctrl/broadcom/Kconfig new file mode 100644 index 0000000000..4056782213 --- /dev/null +++ b/drivers/pinctrl/broadcom/Kconfig @@ -0,0 +1,7 @@ +config PINCTRL_BCM283X + depends on ARCH_BCM283X && PINCTRL_FULL && OF_CONTROL + default y + bool "Broadcom 283x family pin control driver" + help + Support pin multiplexing and pin configuration control on + Broadcom's 283x family of SoCs. diff --git a/drivers/pinctrl/broadcom/Makefile b/drivers/pinctrl/broadcom/Makefile new file mode 100644 index 0000000000..2a1e550f88 --- /dev/null +++ b/drivers/pinctrl/broadcom/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2018 Alexander Graf +# +# SPDX-License-Identifier: GPL-2.0 +# https://spdx.org/licenses + +obj-$(CONFIG_PINCTRL_BCM283X) += pinctrl-bcm283x.o diff --git a/drivers/pinctrl/broadcom/pinctrl-bcm283x.c b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c new file mode 100644 index 0000000000..83dde2302e --- /dev/null +++ b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2018 Alexander Graf + * + * Based on drivers/pinctrl/mvebu/pinctrl-mvebu.c and + * drivers/gpio/bcm2835_gpio.c + * + * This driver gets instantiated by the GPIO driver, because both devices + * share the same device node. + * + * SPDX-License-Identifier: GPL-2.0 + * https://spdx.org/licenses + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct bcm283x_pinctrl_priv { + u32 *base_reg; +}; + +#define MAX_PINS_PER_BANK 16 + +static void bcm2835_gpio_set_func_id(struct udevice *dev, unsigned int gpio, + int func) +{ + struct bcm283x_pinctrl_priv *priv = dev_get_priv(dev); + int reg_offset; + int field_offset; + + reg_offset = BCM2835_GPIO_FSEL_BANK(gpio); + field_offset = BCM2835_GPIO_FSEL_SHIFT(gpio); + + clrsetbits_le32(&priv->base_reg[reg_offset], + BCM2835_GPIO_FSEL_MASK << field_offset, + (func & BCM2835_GPIO_FSEL_MASK) << field_offset); +} + +static int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned int gpio) +{ + struct bcm283x_pinctrl_priv *priv = dev_get_priv(dev); + u32 val; + + val = readl(&priv->base_reg[BCM2835_GPIO_FSEL_BANK(gpio)]); + + return (val >> BCM2835_GPIO_FSEL_SHIFT(gpio) & BCM2835_GPIO_FSEL_MASK); +} + +/* + * bcm283x_pinctrl_set_state: configure pin functions. + * @dev: the pinctrl device to be configured. + * @config: the state to be configured. + * @return: 0 in success + */ +int bcm283x_pinctrl_set_state(struct udevice *dev, struct udevice *config) +{ + u32 pin_arr[MAX_PINS_PER_BANK]; + u32 function; + int i, len, pin_count = 0; + + if (!dev_read_prop(config, "brcm,pins", &len) || !len || + len & 0x3 || dev_read_u32_array(config, "brcm,pins", pin_arr, + len / sizeof(u32))) { + debug("Failed reading pins array for pinconfig %s (%d)\n", + config->name, len); + return -EINVAL; + } + + pin_count = len / sizeof(u32); + + function = dev_read_u32_default(config, "brcm,function", -1); + if (function < 0) { + debug("Failed reading function for pinconfig %s (%d)\n", + config->name, function); + return -EINVAL; + } + + for (i = 0; i < pin_count; i++) + bcm2835_gpio_set_func_id(dev, pin_arr[i], function); + + return 0; +} + +static int bcm283x_pinctrl_get_gpio_mux(struct udevice *dev, int banknum, + int index) +{ + if (banknum != 0) + return -EINVAL; + + return bcm2835_gpio_get_func_id(dev, index); +} + +static const struct udevice_id bcm2835_pinctrl_id[] = { + {.compatible = "brcm,bcm2835-gpio"}, + {} +}; + +int bcm283x_pinctl_probe(struct udevice *dev) +{ + struct bcm283x_pinctrl_priv *priv; + int ret; + struct udevice *pdev; + + priv = dev_get_priv(dev); + if (!priv) { + debug("%s: Failed to get private\n", __func__); + return -EINVAL; + } + + priv->base_reg = dev_read_addr_ptr(dev); + if (priv->base_reg == (void *)FDT_ADDR_T_NONE) { + debug("%s: Failed to get base address\n", __func__); + return -EINVAL; + } + + /* Create GPIO device as well */ + ret = device_bind(dev, lists_driver_lookup_name("gpio_bcm2835"), + "gpio_bcm2835", NULL, dev_of_offset(dev), &pdev); + if (ret) { + /* + * While we really want the pinctrl driver to work to make + * devices go where they should go, the GPIO controller is + * not quite as crucial as it's only rarely used, so don't + * fail here. + */ + printf("Failed to bind GPIO driver\n"); + } + + return 0; +} + +static struct pinctrl_ops bcm283x_pinctrl_ops = { + .set_state = bcm283x_pinctrl_set_state, + .get_gpio_mux = bcm283x_pinctrl_get_gpio_mux, +}; + +U_BOOT_DRIVER(pinctrl_bcm283x) = { + .name = "bcm283x_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(bcm2835_pinctrl_id), + .priv_auto_alloc_size = sizeof(struct bcm283x_pinctrl_priv), + .ops = &bcm283x_pinctrl_ops, + .probe = bcm283x_pinctl_probe +}; -- 2.25.1