From cab8a27d80afbdcb7ba422c4c4f85130678373a9 Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Tue, 28 Nov 2017 22:25:24 -0500 Subject: [PATCH] i2c: at91_i2c: remove the .probe_chip function The .probe_chip function is supposed to probe an i2c device on the bus to determine whether a device is answering to a particular address. at91_i2c_probe_chip() did not do anything resembling this and always returned 0. It looks as though at91_i2c_probe_chip() was intended to be a .probe function for the controller, as it was copied-and-pasted to become at91_i2c_probe() in 0bc8f640a4d7ed. Removing the at91_i2c_probe_chip() function makes the higher layer (i2c_probe_chip()) try a zero-length read transfer to test for the presence of a device instead, which does work. Signed-off-by: Alan Ott Acked-by: Wenyou Yang Reviewed-by: Heiko Schocher --- drivers/i2c/at91_i2c.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/drivers/i2c/at91_i2c.c b/drivers/i2c/at91_i2c.c index 20d09296a1..7917ca1231 100644 --- a/drivers/i2c/at91_i2c.c +++ b/drivers/i2c/at91_i2c.c @@ -201,27 +201,6 @@ static int at91_i2c_enable_clk(struct udevice *dev) return 0; } -static int at91_i2c_probe_chip(struct udevice *dev, uint chip, uint chip_flags) -{ - struct at91_i2c_bus *bus = dev_get_priv(dev); - struct at91_i2c_regs *reg = bus->regs; - int ret; - - ret = at91_i2c_enable_clk(dev); - if (ret) - return ret; - - writel(TWI_CR_SWRST, ®->cr); - - at91_calc_i2c_clock(dev, bus->clock_frequency); - - writel(bus->cwgr_val, ®->cwgr); - writel(TWI_CR_MSEN, ®->cr); - writel(TWI_CR_SVDIS, ®->cr); - - return 0; -} - static int at91_i2c_set_bus_speed(struct udevice *dev, unsigned int speed) { struct at91_i2c_bus *bus = dev_get_priv(dev); @@ -256,7 +235,6 @@ static int at91_i2c_ofdata_to_platdata(struct udevice *dev) static const struct dm_i2c_ops at91_i2c_ops = { .xfer = at91_i2c_xfer, - .probe_chip = at91_i2c_probe_chip, .set_bus_speed = at91_i2c_set_bus_speed, .get_bus_speed = at91_i2c_get_bus_speed, }; -- 2.25.1