From ca88677255f03dddd908cd633f8702a4252024ea Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 22 Apr 2006 15:30:07 +0000 Subject: [PATCH] Add watchdog driver, prevents device from rebooting. Kernel now fully usable Add patches for various image formats Add map for MTX-1 board (same as pb1500) SVN-Revision: 3702 --- openwrt/target/linux/au1000-2.6/Makefile | 5 +- openwrt/target/linux/au1000-2.6/config | 823 ++---- .../patches/002-mtx1_flash_map.patch | 16 + .../linux/au1000-2.6/patches/003-zImage.patch | 2272 +++++++++++++++++ .../patches/004-mtx1_watchdog.patch | 285 +++ 5 files changed, 2850 insertions(+), 551 deletions(-) create mode 100644 openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch create mode 100644 openwrt/target/linux/au1000-2.6/patches/003-zImage.patch create mode 100644 openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch diff --git a/openwrt/target/linux/au1000-2.6/Makefile b/openwrt/target/linux/au1000-2.6/Makefile index c361f0e5e8..35ab1034cf 100644 --- a/openwrt/target/linux/au1000-2.6/Makefile +++ b/openwrt/target/linux/au1000-2.6/Makefile @@ -17,9 +17,10 @@ $(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked @$(CP) config $(LINUX_DIR)/.config touch $@ -$(LINUX_BUILD_DIR)/bzImage: $(LINUX_DIR)/vmlinux - $(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE=$(TARGET_CROSS) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) bzImage $(MAKE_TRACE) +$(LINUX_BUILD_DIR)/zImage: $(LINUX_DIR)/vmlinux + $(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE=$(TARGET_CROSS) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) zImage.flash $(MAKE_TRACE) $(CP) $(LINUX_DIR)/vmlinux $@ + echo "toto" touch $@ compile: $(LINUX_DIR)/vmlinux diff --git a/openwrt/target/linux/au1000-2.6/config b/openwrt/target/linux/au1000-2.6/config index 37dac8ed26..bb7e267ad1 100644 --- a/openwrt/target/linux/au1000-2.6/config +++ b/openwrt/target/linux/au1000-2.6/config @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16.2 -# Tue Apr 11 13:27:02 2006 +# Linux kernel version: 2.6.16.7 +# Sat Apr 22 16:46:55 2006 # CONFIG_MIPS=y @@ -113,7 +113,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set -# CONFIG_64BIT_PHYS_ADDR is not set +CONFIG_64BIT_PHYS_ADDR=y # CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y @@ -148,19 +148,21 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -# CONFIG_ELF_CORE is not set +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -169,10 +171,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_SLAB is not set +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -CONFIG_SLOB=y +# CONFIG_SLOB is not set CONFIG_OBSOLETE_INTERMODULE=y # @@ -180,11 +182,11 @@ CONFIG_OBSOLETE_INTERMODULE=y # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y # # Block layer @@ -196,8 +198,8 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set @@ -226,7 +228,7 @@ CONFIG_MMU=y # Executable file formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m +CONFIG_BINFMT_MISC=y CONFIG_TRAD_SIGNALS=y # CONFIG_PM is not set @@ -239,12 +241,12 @@ CONFIG_NET=y # Networking options # # CONFIG_NETDEBUG is not set -CONFIG_PACKET=y +CONFIG_PACKET=m CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y +CONFIG_UNIX=m CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -255,33 +257,35 @@ CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_MULTIPATH=y # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -# CONFIG_IP_ROUTE_VERBOSE is not set -# CONFIG_IP_PNP is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m -# CONFIG_NET_IPGRE_BROADCAST is not set -CONFIG_IPSEC_NAT_TRAVERSAL=y +CONFIG_NET_IPGRE_BROADCAST=y +# CONFIG_IPSEC_NAT_TRAVERSAL is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m +# CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y # # TCP congestion control # -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=m +CONFIG_TCP_CONG_BIC=y +# CONFIG_TCP_CONG_CUBIC is not set CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=y +CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m # @@ -289,136 +293,44 @@ CONFIG_TCP_CONG_SCALABLE=m # # CONFIG_IP_VS is not set CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_IPV6_TUNNEL is not set +CONFIG_IPV6_PRIVACY=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set -# CONFIG_BRIDGE_NETFILTER is not set +CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set -CONFIG_NETFILTER_XTABLES=y -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -CONFIG_NETFILTER_XT_MATCH_STATE=y -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -CONFIG_NETFILTER_XT_MATCH_TCPMSS=y +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=y +CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_CT_ACCT=y CONFIG_IP_NF_CONNTRACK_MARK=y # CONFIG_IP_NF_CONNTRACK_EVENTS is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=y -CONFIG_IP_NF_IRC=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m # CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_PPTP=m -CONFIG_IP_NF_SIP=m +# CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_LAYER7=m -# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_IPP2P=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_TIME=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -# CONFIG_IP_NF_MATCH_POLICY is not set -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_IP_NF_TARGET_IMQ=m -# CONFIG_IP_NF_TARGET_LOG is not set -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=y -CONFIG_IP_NF_NAT=y -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=y -CONFIG_IP_NF_TARGET_REDIRECT=y -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_IRC=y -CONFIG_IP_NF_NAT_FTP=y -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_PPTP=m -CONFIG_IP_NF_NAT_SIP=m -CONFIG_IP_NF_MANGLE=y -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_TTL=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set -CONFIG_IP_NF_SET=m -CONFIG_IP_NF_SET_MAX=256 -CONFIG_IP_NF_SET_HASHSIZE=1024 -CONFIG_IP_NF_SET_IPMAP=m -CONFIG_IP_NF_SET_MACIPMAP=m -CONFIG_IP_NF_SET_PORTMAP=m -CONFIG_IP_NF_SET_IPHASH=m -CONFIG_IP_NF_SET_NETHASH=m -CONFIG_IP_NF_SET_IPTREE=m -CONFIG_IP_NF_MATCH_SET=m -CONFIG_IP_NF_TARGET_SET=m +# CONFIG_IP_NF_SET is not set # # IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -# CONFIG_IP6_NF_MATCH_RT is not set -# CONFIG_IP6_NF_MATCH_OPTS is not set -# CONFIG_IP6_NF_MATCH_FRAG is not set -# CONFIG_IP6_NF_MATCH_HL is not set -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set -# CONFIG_IP6_NF_MATCH_AHESP is not set -CONFIG_IP6_NF_MATCH_EUI64=m -# CONFIG_IP6_NF_MATCH_POLICY is not set -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_IMQ=m -# CONFIG_IP6_NF_TARGET_LOG is not set -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set -# CONFIG_IP6_NF_RAW is not set # # Bridge: Netfilter Configuration @@ -458,17 +370,12 @@ CONFIG_BRIDGE_EBT_ULOG=m # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -CONFIG_ATM_CLIP_NO_ICMP=y -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -CONFIG_ATM_BR2684_IPFILTER=y -CONFIG_BRIDGE=y -CONFIG_VLAN_8021Q=y +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set -# CONFIG_LLC2 is not set +CONFIG_LLC=m +CONFIG_LLC2=m # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set @@ -491,16 +398,15 @@ CONFIG_NET_SCH_CLK_JIFFIES=y CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_ESFQ=m +# CONFIG_NET_SCH_ESFQ is not set CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m -# CONFIG_NET_SCH_NETEM is not set +CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m # @@ -513,67 +419,35 @@ CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_CLS_U32_MARK is not set +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m # CONFIG_NET_CLS_IND is not set CONFIG_NET_ESTIMATOR=y # # Network testing # -# CONFIG_NET_PKTGEN is not set -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -# CONFIG_AX25_DAMA_SLAVE is not set -# CONFIG_NETROM is not set -# CONFIG_ROSE is not set - -# -# AX.25 network device drivers -# -CONFIG_MKISS=m -# CONFIG_6PACK is not set -# CONFIG_BPQETHER is not set -# CONFIG_BAYCOM_SER_FDX is not set -# CONFIG_BAYCOM_SER_HDX is not set -# CONFIG_YAM is not set +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -582,21 +456,21 @@ CONFIG_IEEE80211_CRYPT_TKIP=m # # Generic Driver Options # -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=m +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set @@ -628,7 +502,7 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set @@ -641,11 +515,10 @@ CONFIG_MTD_CFI_UTIL=y # # Mapping drivers for chip access # -CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ALCHEMY is not set CONFIG_MTD_MTX1=y -# CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set # @@ -697,8 +570,9 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -712,7 +586,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) @@ -721,14 +595,14 @@ CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set +CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # @@ -798,15 +672,11 @@ CONFIG_BLK_DEV_SD=m # Network device support # CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set +# CONFIG_IFB is not set +CONFIG_DUMMY=m +CONFIG_BONDING=m # CONFIG_EQUALIZER is not set -CONFIG_IMQ=m -# CONFIG_IMQ_BEHAVIOR_AA is not set -# CONFIG_IMQ_BEHAVIOR_AB is not set -CONFIG_IMQ_BEHAVIOR_BA=y -# CONFIG_IMQ_BEHAVIOR_BB is not set -CONFIG_IMQ_NUM_DEVS=2 +# CONFIG_IMQ is not set CONFIG_TUN=m # @@ -837,26 +707,7 @@ CONFIG_MIPS_AU1X00_ENET=y # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) @@ -872,7 +723,6 @@ CONFIG_NET_PCI=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -896,20 +746,15 @@ CONFIG_NET_RADIO=y # # Obsolete Wireless cards support (pre-802.11) # -# CONFIG_STRIP is not set +CONFIG_STRIP=m # # Wireless 802.11b ISA/PCI cards support # -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2200=m -# CONFIG_IPW2200_DEBUG is not set CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set CONFIG_PCI_HERMES=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m @@ -918,49 +763,27 @@ CONFIG_PCI_ATMEL=m # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # # Wan interfaces # # CONFIG_WAN is not set - -# -# ATM drivers -# -CONFIG_ATM_DUMMY=m -CONFIG_ATM_TCP=m -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -# CONFIG_ATM_FIRESTREAM is not set -# CONFIG_ATM_ZATM is not set -# CONFIG_ATM_NICSTAR is not set -# CONFIG_ATM_IDT77252 is not set -# CONFIG_ATM_AMBASSADOR is not set -# CONFIG_ATM_HORIZON is not set -# CONFIG_ATM_IA is not set -# CONFIG_ATM_FORE200E_MAYBE is not set -# CONFIG_ATM_HE is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m -CONFIG_PPPOATM=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set +CONFIG_SHAPER=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -978,7 +801,7 @@ CONFIG_PPPOATM=m # # Input device support # -CONFIG_INPUT=m +CONFIG_INPUT=y # # Userland interfaces @@ -986,7 +809,7 @@ CONFIG_INPUT=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # @@ -1007,7 +830,9 @@ CONFIG_INPUT_EVDEV=m # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -1015,10 +840,10 @@ CONFIG_INPUT_EVDEV=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_AU1X00 is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support @@ -1038,9 +863,29 @@ CONFIG_UNIX98_PTYS=y # # Watchdog Cards # -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_MTX1_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +CONFIG_PCIPCWATCHDOG=m +CONFIG_WDTPCI=m +CONFIG_WDT_501_PCI=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_RTC=m +CONFIG_GEN_RTC=m +CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1090,29 +935,7 @@ CONFIG_UNIX98_PTYS=y # # Multimedia devices # -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# - -# -# Video Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_STRADIS is not set -# CONFIG_VIDEO_MXB is not set -# CONFIG_VIDEO_DPC is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set +# CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices @@ -1124,94 +947,16 @@ CONFIG_VIDEO_DEV=m # # CONFIG_FB is not set +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + # # Sound # -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# PCI devices -# -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# ALSA MIPS devices -# -# CONFIG_SND_AU1X00 is not set - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set +# CONFIG_SOUND is not set # # USB support @@ -1232,20 +977,15 @@ CONFIG_USB_DEVICEFS=y # # USB Host Controller Drivers # -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m @@ -1258,15 +998,14 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1297,34 +1036,36 @@ CONFIG_USB_STORAGE=m # # USB Imaging devices # -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m # # USB Multimedia devices # -# CONFIG_USB_DABUSB is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_DSBR is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_PWC is not set +CONFIG_USB_DABUSB=m + +# +# Video4Linux support is needed for USB Multimedia device support +# # # USB Network Adapters # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_MON is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_ZD1201=m +CONFIG_USB_MON=y # # USB port drivers @@ -1334,62 +1075,58 @@ CONFIG_USB_STORAGE=m # USB Serial Converter support # CONFIG_USB_SERIAL=m -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRPRIME=m # CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP2101=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_VISOR=m -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m # CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y # # USB Miscellaneous drivers # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_PHIDGETKIT=m +CONFIG_USB_PHIDGETSERVO=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_LD=m +CONFIG_USB_TEST=m # # USB DSL modem support # -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -# CONFIG_USB_CXACRU is not set -CONFIG_USB_UEAGLEATM=m -# CONFIG_USB_XUSBATM is not set # # USB Gadget Support @@ -1413,34 +1150,26 @@ CONFIG_USB_UEAGLEATM=m # # File systems # -CONFIG_EXT2_FS=m -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=m # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_SECURITY is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -# CONFIG_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=m -# CONFIG_ROMFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1455,26 +1184,28 @@ CONFIG_INOTIFY=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m -# CONFIG_MSDOS_FS is not set +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set +CONFIG_PROC_KCORE=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set +CONFIG_DEVFS_DEBUG=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems @@ -1490,15 +1221,12 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=m CONFIG_SQUASHFS=y # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 @@ -1512,24 +1240,32 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # # Network File Systems # -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=m +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1539,28 +1275,13 @@ CONFIG_CIFS=m # # Partition Types # -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y +# CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set # # Native Language Support # -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set @@ -1610,11 +1331,11 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200" +CONFIG_CMDLINE="" # # Security options @@ -1627,29 +1348,29 @@ CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m # # Hardware crypto devices @@ -1659,8 +1380,12 @@ CONFIG_CRYPTO_MICHAEL_MIC=m # Library routines # CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_CRC16=y CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch b/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch new file mode 100644 index 0000000000..9a6b05b146 --- /dev/null +++ b/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch @@ -0,0 +1,16 @@ +diff -urN linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c +--- linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c 2006-04-20 19:16:26.000000000 +0200 +@@ -105,6 +105,12 @@ + #define USE_LOCAL_ACCESSORS /* why? */ + #endif + ++#ifdef CONFIG_MIPS_MTX1 ++#define BOARD_MAP_NAME "MTX-1 Flash" ++#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ ++#define BOARD_FLASH_WIDTH 4 /* 32-bits */ ++#endif ++ + static struct map_info alchemy_map = { + .name = BOARD_MAP_NAME, + }; diff --git a/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch b/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch new file mode 100644 index 0000000000..6c2230f8c9 --- /dev/null +++ b/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch @@ -0,0 +1,2272 @@ +diff -urN linux-2.6.16.7/arch/mips/Makefile linux-2.6.16.7.new/arch/mips/Makefile +--- linux-2.6.16.7/arch/mips/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/Makefile 2006-04-20 19:27:22.000000000 +0200 +@@ -840,6 +840,12 @@ + vmlinux.srec: $(vmlinux-32) + +@$(call makeboot,$@) + ++zImage: vmlinux ++ +@$(call makeboot,$@) ++ ++zImage.flash: vmlinux ++ +@$(call makeboot,$@) ++ + CLEAN_FILES += vmlinux.ecoff \ + vmlinux.srec \ + vmlinux.rm200.tmp \ +@@ -848,6 +854,7 @@ + archclean: + @$(MAKE) $(clean)=arch/mips/boot + @$(MAKE) $(clean)=arch/mips/lasat ++ @$(MAKE) $(clean)=arch/mips/boot/compressed + + CLEAN_FILES += vmlinux.32 \ + vmlinux.64 \ +diff -urN linux-2.6.16.7/arch/mips/Makefile.orig linux-2.6.16.7.new/arch/mips/Makefile.orig +--- linux-2.6.16.7/arch/mips/Makefile.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/Makefile.orig 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,858 @@ ++# ++# This file is subject to the terms and conditions of the GNU General Public ++# License. See the file "COPYING" in the main directory of this archive ++# for more details. ++# ++# Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle ++# DECStation modifications by Paul M. Antoine, 1996 ++# Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki ++# ++# This file is included by the global makefile so that you can add your own ++# architecture-specific flags and dependencies. Remember to do have actions ++# for "archclean" cleaning up for this architecture. ++# ++ ++as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \ ++ -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \ ++ else echo "$(2)"; fi ;) ++ ++cflags-y := ++ ++# ++# Select the object file format to substitute into the linker script. ++# ++ifdef CONFIG_CPU_LITTLE_ENDIAN ++32bit-tool-prefix = mipsel-linux- ++64bit-tool-prefix = mips64el-linux- ++32bit-bfd = elf32-tradlittlemips ++64bit-bfd = elf64-tradlittlemips ++32bit-emul = elf32ltsmip ++64bit-emul = elf64ltsmip ++else ++32bit-tool-prefix = mips-linux- ++64bit-tool-prefix = mips64-linux- ++32bit-bfd = elf32-tradbigmips ++64bit-bfd = elf64-tradbigmips ++32bit-emul = elf32btsmip ++64bit-emul = elf64btsmip ++endif ++ ++ifdef CONFIG_32BIT ++gcc-abi = 32 ++tool-prefix = $(32bit-tool-prefix) ++UTS_MACHINE := mips ++endif ++ifdef CONFIG_64BIT ++gcc-abi = 64 ++tool-prefix = $(64bit-tool-prefix) ++UTS_MACHINE := mips64 ++endif ++ ++ifdef CONFIG_CROSSCOMPILE ++CROSS_COMPILE := $(tool-prefix) ++endif ++ ++CHECKFLAGS-y += -D__linux__ -D__mips__ \ ++ -D_MIPS_SZINT=32 \ ++ -D_ABIO32=1 \ ++ -D_ABIN32=2 \ ++ -D_ABI64=3 ++CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \ ++ -D_MIPS_SZLONG=32 \ ++ -D_MIPS_SZPTR=32 \ ++ -D__PTRDIFF_TYPE__=int ++CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \ ++ -D_MIPS_SZLONG=64 \ ++ -D_MIPS_SZPTR=64 \ ++ -D__PTRDIFF_TYPE__="long int" ++CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__ ++CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__ ++ ++CHECKFLAGS = $(CHECKFLAGS-y) ++ ++ifdef CONFIG_BUILD_ELF64 ++gas-abi = 64 ++ld-emul = $(64bit-emul) ++vmlinux-32 = vmlinux.32 ++vmlinux-64 = vmlinux ++else ++gas-abi = 32 ++ld-emul = $(32bit-emul) ++vmlinux-32 = vmlinux ++vmlinux-64 = vmlinux.64 ++ ++cflags-$(CONFIG_64BIT) += $(call cc-option,-mno-explicit-relocs) ++endif ++ ++# ++# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel ++# code since it only slows down the whole thing. At some point we might make ++# use of global pointer optimizations but their use of $28 conflicts with ++# the current pointer optimization. ++# ++# The DECStation requires an ECOFF kernel for remote booting, other MIPS ++# machines may also. Since BFD is incredibly buggy with respect to ++# crossformat linking we rely on the elf2ecoff tool for format conversion. ++# ++cflags-y += -G 0 -mno-abicalls -fno-pic -pipe ++cflags-y += -msoft-float ++LDFLAGS_vmlinux += -G 0 -static -n -nostdlib ++MODFLAGS += -mlong-calls ++ ++# ++# We explicitly add the endianness specifier if needed, this allows ++# to compile kernels with a toolchain for the other endianness. We ++# carefully avoid to add it redundantly because gcc 3.3/3.4 complains ++# when fed the toolchain default! ++# ++cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB) ++cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL) ++ ++cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ ++ -fno-omit-frame-pointer ++ ++# ++# Use: $(call set_gccflags,,,,,) ++# ++# , -- preferred CPU and ISA designations (may require ++# recent tools) ++# , -- fallback CPU and ISA designations (have to work ++# with up to the oldest supported tools) ++# -- an ISA designation used as an ABI selector for ++# gcc versions that do not support "-mabi=32" ++# (depending on the CPU type, either "mips1" or ++# "mips2") ++# ++set_gccflags = $(shell \ ++while :; do \ ++ cpu=$(1); isa=-$(2); \ ++ for gcc_opt in -march= -mcpu=; do \ ++ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ ++ -xc /dev/null > /dev/null 2>&1 && \ ++ break 2; \ ++ done; \ ++ cpu=$(3); isa=-$(4); \ ++ for gcc_opt in -march= -mcpu=; do \ ++ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ ++ -xc /dev/null > /dev/null 2>&1 && \ ++ break 2; \ ++ done; \ ++ break; \ ++done; \ ++gcc_abi=-mabi=$(gcc-abi); gcc_cpu=$$cpu; \ ++if $(CC) $$gcc_abi -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then \ ++ gcc_isa=$$isa; \ ++else \ ++ gcc_abi=; gcc_isa=-$(5); \ ++fi; \ ++gas_abi=-Wa,-$(gcc-abi); gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \ ++while :; do \ ++ for gas_opt in -Wa,-march= -Wa,-mcpu=; do \ ++ $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \ ++ -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \ ++ break 2; \ ++ done; \ ++ gas_abi=; gas_opt=; gas_cpu=; gas_isa=; \ ++ break; \ ++done; \ ++if test "$(gcc-abi)" != "$(gas-abi)"; then \ ++ gas_abi="-Wa,-$(gas-abi) -Wa,-mgp$(gcc-abi)"; \ ++fi; \ ++if test "$$gcc_opt" = -march= && test -n "$$gcc_abi"; then \ ++ $(CC) $$gcc_abi $$gcc_opt$$gcc_cpu -S -o /dev/null \ ++ -xc /dev/null > /dev/null 2>&1 && \ ++ gcc_isa=; \ ++fi; \ ++echo $$gcc_abi $$gcc_opt$$gcc_cpu $$gcc_isa $$gas_abi $$gas_opt$$gas_cpu $$gas_isa) ++ ++# ++# CPU-dependent compiler/assembler options for optimization. ++# ++cflags-$(CONFIG_CPU_R3000) += \ ++ $(call set_gccflags,r3000,mips1,r3000,mips1,mips1) ++CHECKFLAGS-$(CONFIG_CPU_R3000) += -D_MIPS_ISA=_MIPS_ISA_MIPS1 ++ ++cflags-$(CONFIG_CPU_TX39XX) += \ ++ $(call set_gccflags,r3900,mips1,r3000,mips1,mips1) ++CHECKFLAGS-$(CONFIG_CPU_TX39XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS1 ++ ++cflags-$(CONFIG_CPU_R6000) += \ ++ $(call set_gccflags,r6000,mips2,r6000,mips2,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_R6000) += -D_MIPS_ISA=_MIPS_ISA_MIPS2 ++ ++cflags-$(CONFIG_CPU_R4300) += \ ++ $(call set_gccflags,r4300,mips3,r4300,mips3,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_R4300) += -D_MIPS_ISA=_MIPS_ISA_MIPS3 ++ ++cflags-$(CONFIG_CPU_VR41XX) += \ ++ $(call set_gccflags,r4100,mips3,r4600,mips3,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_VR41XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3 ++ ++cflags-$(CONFIG_CPU_R4X00) += \ ++ $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_R4X00) += -D_MIPS_ISA=_MIPS_ISA_MIPS3 ++ ++cflags-$(CONFIG_CPU_TX49XX) += \ ++ $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_TX49XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3 ++ ++cflags-$(CONFIG_CPU_MIPS32_R1) += \ ++ $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_MIPS32_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS32 ++ ++cflags-$(CONFIG_CPU_MIPS32_R2) += \ ++ $(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_MIPS32_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS32 ++ ++cflags-$(CONFIG_CPU_MIPS64_R1) += \ ++ $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_MIPS64_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64 ++ ++cflags-$(CONFIG_CPU_MIPS64_R2) += \ ++ $(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_MIPS64_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS64 ++ ++cflags-$(CONFIG_CPU_R5000) += \ ++ $(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_R5000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 ++ ++cflags-$(CONFIG_CPU_R5432) += \ ++ $(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_R5432) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 ++ ++cflags-$(CONFIG_CPU_NEVADA) += \ ++ $(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_NEVADA) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 ++ ++cflags-$(CONFIG_CPU_RM7000) += \ ++ $(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_RM7000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 ++ ++cflags-$(CONFIG_CPU_RM9000) += \ ++ $(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_RM9000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 ++ ++ ++cflags-$(CONFIG_CPU_SB1) += \ ++ $(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_SB1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64 ++ ++cflags-$(CONFIG_CPU_R8000) += \ ++ $(call set_gccflags,r8000,mips4,r8000,mips4,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_R8000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 ++ ++cflags-$(CONFIG_CPU_R10000) += \ ++ $(call set_gccflags,r10000,mips4,r8000,mips4,mips2) \ ++ -Wa,--trap ++CHECKFLAGS-$(CONFIG_CPU_R10000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 ++ ++ifdef CONFIG_CPU_SB1 ++ifdef CONFIG_SB1_PASS_1_WORKAROUNDS ++MODFLAGS += -msb1-pass1-workarounds ++endif ++endif ++ ++# ++# Firmware support ++# ++libs-$(CONFIG_ARC) += arch/mips/arc/ ++libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/ ++ ++# ++# Board-dependent options and extra files ++# ++ ++# ++# Acer PICA 61, Mips Magnum 4000 and Olivetti M700. ++# ++core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ ++cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/asm-mips/mach-jazz ++load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 ++ ++# ++# Common Alchemy Au1x00 stuff ++# ++core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ ++cflags-$(CONFIG_SOC_AU1X00) += -Iinclude/asm-mips/mach-au1x00 ++ ++# ++# AMD Alchemy Pb1000 eval board ++# ++libs-$(CONFIG_MIPS_PB1000) += arch/mips/au1000/pb1000/ ++cflags-$(CONFIG_MIPS_PB1000) += -Iinclude/asm-mips/mach-pb1x00 ++load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Pb1100 eval board ++# ++libs-$(CONFIG_MIPS_PB1100) += arch/mips/au1000/pb1100/ ++cflags-$(CONFIG_MIPS_PB1100) += -Iinclude/asm-mips/mach-pb1x00 ++load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Pb1500 eval board ++# ++libs-$(CONFIG_MIPS_PB1500) += arch/mips/au1000/pb1500/ ++cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00 ++load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Pb1550 eval board ++# ++libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/ ++cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00 ++load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Pb1200 eval board ++# ++libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/ ++cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00 ++load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Db1000 eval board ++# ++libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/ ++cflags-$(CONFIG_MIPS_DB1000) += -Iinclude/asm-mips/mach-db1x00 ++load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Db1100 eval board ++# ++libs-$(CONFIG_MIPS_DB1100) += arch/mips/au1000/db1x00/ ++cflags-$(CONFIG_MIPS_DB1100) += -Iinclude/asm-mips/mach-db1x00 ++load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Db1500 eval board ++# ++libs-$(CONFIG_MIPS_DB1500) += arch/mips/au1000/db1x00/ ++cflags-$(CONFIG_MIPS_DB1500) += -Iinclude/asm-mips/mach-db1x00 ++load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Db1550 eval board ++# ++libs-$(CONFIG_MIPS_DB1550) += arch/mips/au1000/db1x00/ ++cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00 ++load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Db1200 eval board ++# ++libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/ ++cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00 ++load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Bosporus eval board ++# ++libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/ ++cflags-$(CONFIG_MIPS_BOSPORUS) += -Iinclude/asm-mips/mach-db1x00 ++load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000 ++ ++# ++# AMD Alchemy Mirage eval board ++# ++libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/au1000/db1x00/ ++cflags-$(CONFIG_MIPS_MIRAGE) += -Iinclude/asm-mips/mach-db1x00 ++load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000 ++ ++# ++# 4G-Systems eval board ++# ++libs-$(CONFIG_MIPS_MTX1) += arch/mips/au1000/mtx-1/ ++load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000 ++ ++# ++# MyCable eval board ++# ++libs-$(CONFIG_MIPS_XXS1500) += arch/mips/au1000/xxs1500/ ++load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 ++ ++# ++# Cobalt Server ++# ++core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ ++cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt ++load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 ++ ++# ++# DECstation family ++# ++core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/ ++cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec ++libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/ ++load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000 ++CLEAN_FILES += drivers/tc/lk201-map.c ++ ++# ++# Galileo EV64120 Board ++# ++core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/ev64120/ ++core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/common/ ++cflags-$(CONFIG_MIPS_EV64120) += -Iinclude/asm-mips/mach-ev64120 ++load-$(CONFIG_MIPS_EV64120) += 0xffffffff80100000 ++ ++# ++# Galileo EV96100 Board ++# ++core-$(CONFIG_MIPS_EV96100) += arch/mips/galileo-boards/ev96100/ ++cflags-$(CONFIG_MIPS_EV96100) += -Iinclude/asm-mips/mach-ev96100 ++load-$(CONFIG_MIPS_EV96100) += 0xffffffff80100000 ++ ++# ++# Globespan IVR eval board with QED 5231 CPU ++# ++core-$(CONFIG_ITE_BOARD_GEN) += arch/mips/ite-boards/generic/ ++core-$(CONFIG_MIPS_IVR) += arch/mips/ite-boards/ivr/ ++load-$(CONFIG_MIPS_IVR) += 0xffffffff80100000 ++ ++# ++# ITE 8172 eval board with QED 5231 CPU ++# ++core-$(CONFIG_MIPS_ITE8172) += arch/mips/ite-boards/qed-4n-s01b/ ++load-$(CONFIG_MIPS_ITE8172) += 0xffffffff80100000 ++ ++# ++# For all MIPS, Inc. eval boards ++# ++core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ ++ ++# ++# MIPS Atlas board ++# ++core-$(CONFIG_MIPS_ATLAS) += arch/mips/mips-boards/atlas/ ++cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-atlas ++cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-mips ++load-$(CONFIG_MIPS_ATLAS) += 0xffffffff80100000 ++ ++# ++# MIPS Malta board ++# ++core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/malta/ ++cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips ++load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 ++ ++# ++# MIPS SEAD board ++# ++core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/ ++load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000 ++ ++# ++# MIPS SIM ++# ++core-$(CONFIG_MIPS_SIM) += arch/mips/mips-boards/sim/ ++cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-sim ++load-$(CONFIG_MIPS_SIM) += 0x80100000 ++ ++# ++# Momentum Ocelot board ++# ++# The Ocelot setup.o must be linked early - it does the ioremap() for the ++# mips_io_port_base. ++# ++core-$(CONFIG_MOMENCO_OCELOT) += arch/mips/gt64120/common/ \ ++ arch/mips/gt64120/momenco_ocelot/ ++cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot ++load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000 ++ ++# ++# Momentum Ocelot-G board ++# ++# The Ocelot-G setup.o must be linked early - it does the ioremap() for the ++# mips_io_port_base. ++# ++core-$(CONFIG_MOMENCO_OCELOT_G) += arch/mips/momentum/ocelot_g/ ++load-$(CONFIG_MOMENCO_OCELOT_G) += 0xffffffff80100000 ++ ++# ++# Momentum Ocelot-C and -CS boards ++# ++# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the ++# mips_io_port_base. ++core-$(CONFIG_MOMENCO_OCELOT_C) += arch/mips/momentum/ocelot_c/ ++load-$(CONFIG_MOMENCO_OCELOT_C) += 0xffffffff80100000 ++ ++# ++# PMC-Sierra Yosemite ++# ++core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/ ++cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite ++load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 ++ ++# Qemu simulating MIPS32 4Kc ++# ++core-$(CONFIG_QEMU) += arch/mips/qemu/ ++cflags-$(CONFIG_QEMU) += -Iinclude/asm-mips/mach-qemu ++load-$(CONFIG_QEMU) += 0xffffffff80010000 ++ ++# ++# Momentum Ocelot-3 ++# ++core-$(CONFIG_MOMENCO_OCELOT_3) += arch/mips/momentum/ocelot_3/ ++cflags-$(CONFIG_MOMENCO_OCELOT_3) += -Iinclude/asm-mips/mach-ocelot3 ++load-$(CONFIG_MOMENCO_OCELOT_3) += 0xffffffff80100000 ++ ++# ++# Momentum Jaguar ATX ++# ++core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/ ++cflags-$(CONFIG_MOMENCO_JAGUAR_ATX) += -Iinclude/asm-mips/mach-ja ++#ifdef CONFIG_JAGUAR_DMALOW ++#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff88000000 ++#else ++load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff80100000 ++#endif ++ ++# ++# NEC DDB ++# ++core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/ ++ ++# ++# NEC DDB Vrc-5074 ++# ++core-$(CONFIG_DDB5074) += arch/mips/ddb5xxx/ddb5074/ ++load-$(CONFIG_DDB5074) += 0xffffffff80080000 ++ ++# ++# NEC DDB Vrc-5476 ++# ++core-$(CONFIG_DDB5476) += arch/mips/ddb5xxx/ddb5476/ ++load-$(CONFIG_DDB5476) += 0xffffffff80080000 ++ ++# ++# NEC DDB Vrc-5477 ++# ++core-$(CONFIG_DDB5477) += arch/mips/ddb5xxx/ddb5477/ ++load-$(CONFIG_DDB5477) += 0xffffffff80100000 ++ ++core-$(CONFIG_LASAT) += arch/mips/lasat/ ++cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat ++load-$(CONFIG_LASAT) += 0xffffffff80000000 ++ ++# ++# Common VR41xx ++# ++core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/ ++cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx ++ ++# ++# NEC VR4133 ++# ++core-$(CONFIG_NEC_CMBVR4133) += arch/mips/vr41xx/nec-cmbvr4133/ ++load-$(CONFIG_NEC_CMBVR4133) += 0xffffffff80100000 ++ ++# ++# ZAO Networks Capcella (VR4131) ++# ++load-$(CONFIG_ZAO_CAPCELLA) += 0xffffffff80000000 ++ ++# ++# Victor MP-C303/304 (VR4122) ++# ++load-$(CONFIG_VICTOR_MPC30X) += 0xffffffff80001000 ++ ++# ++# IBM WorkPad z50 (VR4121) ++# ++core-$(CONFIG_IBM_WORKPAD) += arch/mips/vr41xx/ibm-workpad/ ++load-$(CONFIG_IBM_WORKPAD) += 0xffffffff80004000 ++ ++# ++# CASIO CASSIPEIA E-55/65 (VR4111) ++# ++core-$(CONFIG_CASIO_E55) += arch/mips/vr41xx/casio-e55/ ++load-$(CONFIG_CASIO_E55) += 0xffffffff80004000 ++ ++# ++# TANBAC VR4131 multichip module(TB0225) and TANBAC VR4131DIMM(TB0229) (VR4131) ++# ++load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000 ++ ++# ++# Common Philips PNX8550 ++# ++core-$(CONFIG_SOC_PNX8550) += arch/mips/philips/pnx8550/common/ ++cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550 ++ ++# ++# Philips PNX8550 JBS board ++# ++libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/ ++#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550 ++load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 ++ ++# ++# SGI IP22 (Indy/Indigo2) ++# ++# Set the load address to >= 0xffffffff88069000 if you want to leave space for ++# symmon, 0xffffffff80002000 for production kernels. Note that the value must ++# be aligned to a multiple of the kernel stack size or the handling of the ++# current variable will break so for 64-bit kernels we have to raise the start ++# address by 8kb. ++# ++core-$(CONFIG_SGI_IP22) += arch/mips/sgi-ip22/ ++cflags-$(CONFIG_SGI_IP22) += -Iinclude/asm-mips/mach-ip22 ++ifdef CONFIG_32BIT ++load-$(CONFIG_SGI_IP22) += 0xffffffff88002000 ++endif ++ifdef CONFIG_64BIT ++load-$(CONFIG_SGI_IP22) += 0xffffffff88004000 ++endif ++ ++# ++# SGI-IP27 (Origin200/2000) ++# ++# Set the load address to >= 0xc000000000300000 if you want to leave space for ++# symmon, 0xc00000000001c000 for production kernels. Note that the value must ++# be 16kb aligned or the handling of the current variable will break. ++# ++ifdef CONFIG_SGI_IP27 ++core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/ ++cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27 ++ifdef CONFIG_BUILD_ELF64 ++ifdef CONFIG_MAPPED_KERNEL ++load-$(CONFIG_SGI_IP27) += 0xc00000004001c000 ++OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000 ++dataoffset-$(CONFIG_SGI_IP27) += 0x01000000 ++else ++load-$(CONFIG_SGI_IP27) += 0xa80000000001c000 ++OBJCOPYFLAGS := --change-addresses=0x57ffffff80000000 ++endif ++else ++ifdef CONFIG_MAPPED_KERNEL ++load-$(CONFIG_SGI_IP27) += 0xffffffffc001c000 ++OBJCOPYFLAGS := --change-addresses=0xc000000080000000 ++dataoffset-$(CONFIG_SGI_IP27) += 0x01000000 ++else ++load-$(CONFIG_SGI_IP27) += 0xffffffff8001c000 ++OBJCOPYFLAGS := --change-addresses=0xa800000080000000 ++endif ++endif ++endif ++ ++# ++# SGI-IP32 (O2) ++# ++# Set the load address to >= 80069000 if you want to leave space for symmon, ++# 0xffffffff80004000 for production kernels. Note that the value must be aligned to ++# a multiple of the kernel stack size or the handling of the current variable ++# will break. ++# ++core-$(CONFIG_SGI_IP32) += arch/mips/sgi-ip32/ ++cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32 ++load-$(CONFIG_SGI_IP32) += 0xffffffff80004000 ++ ++# ++# Sibyte SB1250 SOC ++# ++# This is a LIB so that it links at the end, and initcalls are later ++# the sequence; but it is built as an object so that modules don't get ++# removed (as happens, even if they have __initcall/module_init) ++# ++core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/ ++cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \ ++ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL ++ ++core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/ ++cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \ ++ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL ++ ++core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/ ++cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \ ++ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL ++ ++core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/ ++cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \ ++ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL ++ ++# ++# Sibyte BCM91120x (Carmel) board ++# Sibyte BCM91120C (CRhine) board ++# Sibyte BCM91125C (CRhone) board ++# Sibyte BCM91125E (Rhone) board ++# Sibyte SWARM board ++# Sibyte BCM91x80 (BigSur) board ++# ++libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ ++load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000 ++libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/ ++load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000 ++libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/ ++load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000 ++libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/ ++load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000 ++libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ ++load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000 ++libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ ++load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 ++libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ ++load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 ++ ++# ++# SNI RM200 PCI ++# ++core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/ ++cflags-$(CONFIG_SNI_RM200_PCI) += -Iinclude/asm-mips/mach-rm200 ++load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000 ++ ++# ++# Toshiba JMR-TX3927 board ++# ++core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \ ++ arch/mips/jmr3927/common/ ++cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927 ++load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 ++ ++# ++# Toshiba RBTX4927 board or ++# Toshiba RBTX4937 board ++# ++core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/toshiba_rbtx4927/ ++core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/ ++load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000 ++ ++# ++# Toshiba RBTX4938 board ++# ++core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/ ++core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/ ++load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000 ++ ++cflags-y += -Iinclude/asm-mips/mach-generic ++drivers-$(CONFIG_PCI) += arch/mips/pci/ ++ ++ifdef CONFIG_32BIT ++ifdef CONFIG_CPU_LITTLE_ENDIAN ++JIFFIES = jiffies_64 ++else ++JIFFIES = jiffies_64 + 4 ++endif ++else ++JIFFIES = jiffies_64 ++endif ++ ++AFLAGS += $(cflags-y) ++CFLAGS += $(cflags-y) ++ ++LDFLAGS += -m $(ld-emul) ++ ++OBJCOPYFLAGS += --remove-section=.reginfo ++ ++# ++# Choosing incompatible machines durings configuration will result in ++# error messages during linking. Select a default linkscript if ++# none has been choosen above. ++# ++ ++CPPFLAGS_vmlinux.lds := \ ++ $(CFLAGS) \ ++ -D"LOADADDR=$(load-y)" \ ++ -D"JIFFIES=$(JIFFIES)" \ ++ -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)" ++ ++head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o ++ ++libs-y += arch/mips/lib/ ++libs-$(CONFIG_32BIT) += arch/mips/lib-32/ ++libs-$(CONFIG_64BIT) += arch/mips/lib-64/ ++ ++core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/ ++ ++drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/ ++ ++ifdef CONFIG_LASAT ++rom.bin rom.sw: vmlinux ++ $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@ ++endif ++ ++# ++# Some machines like the Indy need 32-bit ELF binaries for booting purposes. ++# Other need ECOFF, so we build a 32-bit ELF binary for them which we then ++# convert to ECOFF using elf2ecoff. ++# ++vmlinux.32: vmlinux ++ $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@ ++ ++# ++# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit ++# ELF files from 32-bit files by conversion. ++# ++vmlinux.64: vmlinux ++ $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@ ++ ++makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1) ++ ++ifdef CONFIG_BOOT_ELF32 ++all: $(vmlinux-32) ++endif ++ ++ifdef CONFIG_BOOT_ELF64 ++all: $(vmlinux-64) ++endif ++ ++ifdef CONFIG_MIPS_ATLAS ++all: vmlinux.srec ++endif ++ ++ifdef CONFIG_MIPS_MALTA ++all: vmlinux.srec ++endif ++ ++ifdef CONFIG_MIPS_SEAD ++all: vmlinux.srec ++endif ++ ++ifdef CONFIG_QEMU ++all: vmlinux.bin ++endif ++ ++ifdef CONFIG_SNI_RM200_PCI ++all: vmlinux.ecoff ++endif ++ ++vmlinux.bin: $(vmlinux-32) ++ +@$(call makeboot,$@) ++ ++vmlinux.ecoff vmlinux.rm200: $(vmlinux-32) ++ +@$(call makeboot,$@) ++ ++vmlinux.srec: $(vmlinux-32) ++ +@$(call makeboot,$@) ++ ++zImage: vmlinux ++ +@$(call makeboot,$@) ++ ++CLEAN_FILES += vmlinux.ecoff \ ++ vmlinux.srec \ ++ vmlinux.rm200.tmp \ ++ vmlinux.rm200 ++ ++archclean: ++ @$(MAKE) $(clean)=arch/mips/boot ++ @$(MAKE) $(clean)=arch/mips/lasat ++ @$(MAKE) $(clean)=arch/mips/boot/compressed ++ ++CLEAN_FILES += vmlinux.32 \ ++ vmlinux.64 \ ++ vmlinux.ecoff +diff -urN linux-2.6.16.7/arch/mips/boot/Makefile linux-2.6.16.7.new/arch/mips/boot/Makefile +--- linux-2.6.16.7/arch/mips/boot/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/boot/Makefile 2006-04-20 19:27:22.000000000 +0200 +@@ -16,6 +16,7 @@ + E2EFLAGS = + endif + ++ + # + # Drop some uninteresting sections in the kernel. + # This is only relevant for ELF kernels but doesn't hurt a.out +@@ -25,7 +26,10 @@ + + VMLINUX = vmlinux + +-all: vmlinux.ecoff vmlinux.srec addinitrd ++ZBOOT_TARGETS = zImage zImage.flash ++bootdir-y := compressed ++ ++all: vmlinux.ecoff vmlinux.srec addinitrd zImage + + vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) + $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS) +@@ -51,3 +55,11 @@ + vmlinux.bin \ + vmlinux.ecoff \ + vmlinux.srec ++ ++.PHONY: $(ZBOOT_TARGETS) $(bootdir-y) ++ ++$(ZBOOT_TARGETS): $(bootdir-y) ++ ++$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ ++ $(addprefix $(obj)/,$(hostprogs-y)) ++ $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS) +diff -urN linux-2.6.16.7/arch/mips/boot/Makefile.orig linux-2.6.16.7.new/arch/mips/boot/Makefile.orig +--- linux-2.6.16.7/arch/mips/boot/Makefile.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/Makefile.orig 2006-04-17 23:53:25.000000000 +0200 +@@ -0,0 +1,53 @@ ++# ++# This file is subject to the terms and conditions of the GNU General Public ++# License. See the file "COPYING" in the main directory of this archive ++# for more details. ++# ++# Copyright (C) 1995, 1998, 2001, 2002 by Ralf Baechle ++# Copyright (C) 2004 Maciej W. Rozycki ++# ++ ++# ++# Some DECstations need all possible sections of an ECOFF executable ++# ++ifdef CONFIG_MACH_DECSTATION ++ E2EFLAGS = -a ++else ++ E2EFLAGS = ++endif ++ ++# ++# Drop some uninteresting sections in the kernel. ++# This is only relevant for ELF kernels but doesn't hurt a.out ++# ++drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options ++strip-flags = $(addprefix --remove-section=,$(drop-sections)) ++ ++VMLINUX = vmlinux ++ ++all: vmlinux.ecoff vmlinux.srec addinitrd ++ ++vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) ++ $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS) ++ ++$(obj)/elf2ecoff: $(obj)/elf2ecoff.c ++ $(HOSTCC) -o $@ $^ ++ ++vmlinux.bin: $(VMLINUX) ++ $(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $(obj)/vmlinux.bin ++ ++vmlinux.srec: $(VMLINUX) ++ $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec ++ ++$(obj)/addinitrd: $(obj)/addinitrd.c ++ $(HOSTCC) -o $@ $^ ++ ++archhelp: ++ @echo '* vmlinux.ecoff - ECOFF boot image' ++ @echo '* vmlinux.srec - SREC boot image' ++ ++clean-files += addinitrd \ ++ elf2ecoff \ ++ vmlinux.bin \ ++ vmlinux.ecoff \ ++ vmlinux.srec +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile 2006-04-20 19:27:22.000000000 +0200 +@@ -0,0 +1,32 @@ ++ ++# ++# arch/mips/boot/compressed/Makefile ++# ++# This file is subject to the terms and conditions of the GNU General Public ++# License. See the file "COPYING" in the main directory of this archive ++# for more details. ++# ++# Copyright (C) 1994 by Linus Torvalds ++# Adapted for PowerPC by Gary Thomas ++# modified by Cort (cort@cs.nmt.edu) ++# ++# Ported to MIPS by Pete Popov, ppopov@embeddedalley.com ++# ++ ++boot := arch/mips/boot ++compressed := arch/mips/boot/compressed ++ ++CFLAGS += -fno-builtin -D__BOOTER__ -I$(compressed)/include ++ ++BOOT_TARGETS = zImage zImage.flash ++ ++bootdir-$(CONFIG_SOC_AU1X00) := au1xxx ++subdir-y := common lib images ++ ++.PHONY: $(BOOT_TARGETS) $(bootdir-y) ++ ++$(BOOT_TARGETS): $(bootdir-y) ++ ++$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ ++ $(addprefix $(obj)/,$(hostprogs-y)) ++ $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS) +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile 2006-04-20 19:27:22.000000000 +0200 +@@ -0,0 +1,110 @@ ++# arch/mips/boot/compressed/au1xxx/Makefile ++# ++# Makefile for AMD Alchemy Semiconductor Au1x based boards. ++# All of the boot loader code was derived from the ppc ++# boot code. ++# ++# Copyright 2001,2002 MontaVista Software Inc. ++# ++# Author: Mark A. Greer ++# mgreer@mvista.com ++# ++# Copyright 2004 Embedded Alley Solutions, Inc ++# Ported and modified for mips 2.6 support by ++# Pete Popov ++# ++# This program is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by the ++# Free Software Foundation; either version 2 of the License, or (at your ++# option) any later version. ++ ++boot := arch/mips/boot ++compressed := $(boot)/compressed ++utils := $(compressed)/utils ++lib := $(compressed)/lib ++images := $(compressed)/images ++common := $(compressed)/common ++ ++######################################################################### ++# START BOARD SPECIFIC VARIABLES ++ ++# These two variables control where the zImage is stored ++# in flash and loaded in memory. It only controls how the srec ++# file is generated, the code is the same. ++RAM_RUN_ADDR = 0x81000000 ++ ++ifdef CONFIG_MIPS_XXS1500 ++FLASH_LOAD_ADDR = 0xBF000000 ++else ++FLASH_LOAD_ADDR = 0xBFD00000 ++endif ++ ++# These two variables specify the free ram region ++# that can be used for temporary malloc area ++AVAIL_RAM_START=0x80500000 ++AVAIL_RAM_END=0x80900000 ++ ++# This one must match the LOADADDR in arch/mips/Makefile! ++LOADADDR=0x80100000 ++ ++# WARNING WARNING WARNING ++# Note that with a LOADADDR of 0x80100000 and AVAIL_RAM_START of ++# 0x80500000, the max decompressed kernel size can be 4MB. Else we ++# start overwriting ourselve. You can change these vars as needed; ++# it would be much better if we just figured everything out on the fly. ++ ++# END BOARD SPECIFIC VARIABLES ++######################################################################### ++ ++OBJECTS := $(obj)/head.o $(common)/misc-common.o $(common)/misc-simple.o \ ++ $(common)/au1k_uart.o ++LIBS := $(lib)/lib.a ++ ++ENTRY := $(utils)/entry ++OFFSET := $(utils)/offset ++SIZE := $(utils)/size ++ ++LD_ARGS := -T $(compressed)/ld.script -Ttext $(RAM_RUN_ADDR) -Bstatic ++ ++ifdef CONFIG_CPU_LITTLE_ENDIAN ++OBJCOPY_ARGS = -O elf32-tradlittlemips ++else ++OBJCOPY_ARGS = -O elf32-tradbigmips ++endif ++ ++$(obj)/head.o: $(obj)/head.S $(TOPDIR)/vmlinux ++ $(CC) -I $(TOPDIR)/include $(AFLAGS) \ ++ -DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) $(TOPDIR)/vmlinux ) \ ++ -c -o $*.o $< ++ ++$(common)/misc-simple.o: ++ $(CC) -I $(TOPDIR)/include $(CFLAGS) -DINITRD_OFFSET=0 -DINITRD_SIZE=0 -DZIMAGE_OFFSET=0 \ ++ -DAVAIL_RAM_START=$(AVAIL_RAM_START) \ ++ -DAVAIL_RAM_END=$(AVAIL_RAM_END) \ ++ -DLOADADDR=$(LOADADDR) \ ++ -DZIMAGE_SIZE=0 -c -o $@ $*.c ++ ++$(obj)/zvmlinux: $(OBJECTS) $(LIBS) $(srctree)/$(compressed)/ld.script $(images)/vmlinux.gz $(common)/dummy.o ++ $(OBJCOPY) \ ++ --add-section=.image=$(images)/vmlinux.gz \ ++ --set-section-flags=.image=contents,alloc,load,readonly,data \ ++ $(common)/dummy.o $(common)/image.o ++ $(LD) $(LD_ARGS) -o $@ $(OBJECTS) $(common)/image.o $(LIBS) ++ $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R __kcrctab -R __ksymtab_strings \ ++ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap ++ ++# Here we manipulate the image in order to get it the necessary ++# srecord file we need. ++zImage: $(obj)/zvmlinux ++ mv $(obj)/zvmlinux $(images)/zImage ++ $(OBJCOPY) -O srec $(images)/zImage $(images)/zImage.srec ++ $(OBJCOPY) -O binary $(images)/zImage $(images)/zImage.bin ++ ++zImage.flash: zImage ++ ( \ ++ flash=${FLASH_LOAD_ADDR} ; \ ++ ram=${RAM_RUN_ADDR} ; \ ++ adjust=$$[ $$flash - $$ram ] ; \ ++ $(OBJCOPY) -O srec --adjust-vma `printf '0x%08x' $$adjust` \ ++ $(images)/zImage $(images)/zImage.flash.srec ; \ ++ ) +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S +--- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,119 @@ ++/* ++ * arch/mips/kernel/head.S ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 1994, 1995 Waldorf Electronics ++ * Written by Ralf Baechle and Andreas Busse ++ * Copyright (C) 1995 - 1999 Ralf Baechle ++ * Copyright (C) 1996 Paul M. Antoine ++ * Modified for DECStation and hence R3000 support by Paul M. Antoine ++ * Further modifications by David S. Miller and Harald Koerfgen ++ * Copyright (C) 1999 Silicon Graphics, Inc. ++ * ++ * Head.S contains the MIPS exception handler and startup code. ++ * ++ ************************************************************************** ++ * 9 Nov, 2000. ++ * Added Cache Error exception handler and SBDDP EJTAG debug exception. ++ * ++ * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com ++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. ++ ************************************************************************** ++ */ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#define IndexInvalidate_I 0x00 ++#define IndexWriteBack_D 0x01 ++ ++ .set noreorder ++ .cprestore ++ LEAF(start) ++start: ++ bal locate ++ nop ++locate: ++ subu s8, ra, 8 /* Where we were loaded */ ++ la sp, (.stack + 8192) ++ ++ move s0, a0 /* Save boot rom start args */ ++ move s1, a1 ++ move s2, a2 ++ move s3, a3 ++ ++ la a0, start /* Where we were linked to run */ ++ ++ move a1, s8 ++ la a2, _edata ++ subu t1, a2, a0 ++ srl t1, t1, 2 ++ ++ /* copy text section */ ++ li t0, 0 ++1: lw v0, 0(a1) ++ nop ++ sw v0, 0(a0) ++ xor t0, t0, v0 ++ addu a0, 4 ++ bne a2, a0, 1b ++ addu a1, 4 ++ ++ /* Clear BSS */ ++ la a0, _edata ++ la a2, _end ++2: sw zero, 0(a0) ++ bne a2, a0, 2b ++ addu a0, 4 ++ ++ /* push the D-Cache and invalidate I-Cache */ ++ li k0, 0x80000000 # start address ++ li k1, 0x80004000 # end address (16KB I-Cache) ++ subu k1, 128 ++ ++1: ++ .set mips3 ++ cache IndexWriteBack_D, 0(k0) ++ cache IndexWriteBack_D, 32(k0) ++ cache IndexWriteBack_D, 64(k0) ++ cache IndexWriteBack_D, 96(k0) ++ cache IndexInvalidate_I, 0(k0) ++ cache IndexInvalidate_I, 32(k0) ++ cache IndexInvalidate_I, 64(k0) ++ cache IndexInvalidate_I, 96(k0) ++ .set mips0 ++ ++ bne k0, k1, 1b ++ addu k0, k0, 128 ++ /* done */ ++ ++ move a0, s8 /* load address */ ++ move a1, t1 /* length in words */ ++ move a2, t0 /* checksum */ ++ move a3, sp ++ ++ la ra, 1f ++ la k0, decompress_kernel ++ jr k0 ++ nop ++1: ++ ++ move a0, s0 ++ move a1, s1 ++ move a2, s2 ++ move a3, s3 ++ li k0, KERNEL_ENTRY ++ jr k0 ++ nop ++3: ++ b 3b ++ END(start) ++ .comm .stack,4096*2,4 +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,14 @@ ++# ++# arch/mips/boot/compressed/common/Makefile ++# ++# This file is subject to the terms and conditions of the GNU General Public ++# License. See the file "COPYING" in the main directory of this archive ++# for more details. ++# ++# Tom Rini January 2001 ++# ++# Pete Popov, 2004 ++# ++ ++lib-y := misc-common.o no_initrd.o dummy.o ++lib-$(CONFIG_SOC_AU1X00) += au1k_uart.o +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,103 @@ ++/* ++ * BRIEF MODULE DESCRIPTION ++ * Simple Au1000 uart routines. ++ * ++ * Copyright 2001 MontaVista Software Inc. ++ * Author: MontaVista Software, Inc. ++ * ppopov@mvista.com or source@mvista.com ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include ++#include ++#include ++#include "ns16550.h" ++ ++typedef unsigned char uint8; ++typedef unsigned int uint32; ++ ++#define UART16550_BAUD_2400 2400 ++#define UART16550_BAUD_4800 4800 ++#define UART16550_BAUD_9600 9600 ++#define UART16550_BAUD_19200 19200 ++#define UART16550_BAUD_38400 38400 ++#define UART16550_BAUD_57600 57600 ++#define UART16550_BAUD_115200 115200 ++ ++#define UART16550_PARITY_NONE 0 ++#define UART16550_PARITY_ODD 0x08 ++#define UART16550_PARITY_EVEN 0x18 ++#define UART16550_PARITY_MARK 0x28 ++#define UART16550_PARITY_SPACE 0x38 ++ ++#define UART16550_DATA_5BIT 0x0 ++#define UART16550_DATA_6BIT 0x1 ++#define UART16550_DATA_7BIT 0x2 ++#define UART16550_DATA_8BIT 0x3 ++ ++#define UART16550_STOP_1BIT 0x0 ++#define UART16550_STOP_2BIT 0x4 ++ ++/* It would be nice if we had a better way to do this. ++ * It could be a variable defined in one of the board specific files. ++ */ ++#undef UART_BASE ++#ifdef CONFIG_COGENT_CSB250 ++#define UART_BASE UART3_ADDR ++#else ++#define UART_BASE UART0_ADDR ++#endif ++ ++/* memory-mapped read/write of the port */ ++#define UART16550_READ(y) (au_readl(UART_BASE + y) & 0xff) ++#define UART16550_WRITE(y,z) (au_writel(z&0xff, UART_BASE + y)) ++ ++/* ++ * We use uart 0, which is already initialized by ++ * yamon. ++ */ ++volatile struct NS16550 * ++serial_init(int chan) ++{ ++ volatile struct NS16550 *com_port; ++ com_port = (struct NS16550 *) UART_BASE; ++ return (com_port); ++} ++ ++void ++serial_putc(volatile struct NS16550 *com_port, unsigned char c) ++{ ++ while ((UART16550_READ(UART_LSR)&0x40) == 0); ++ UART16550_WRITE(UART_TX, c); ++} ++ ++unsigned char ++serial_getc(volatile struct NS16550 *com_port) ++{ ++ while((UART16550_READ(UART_LSR) & 0x1) == 0); ++ return UART16550_READ(UART_RX); ++} ++ ++int ++serial_tstc(volatile struct NS16550 *com_port) ++{ ++ return((UART16550_READ(UART_LSR) & LSR_DR) != 0); ++} +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,4 @@ ++int main(void) ++{ ++ return 0; ++} +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,434 @@ ++/* ++ * arch/mips/boot/compressed/common/misc-common.c ++ * ++ * Misc. bootloader code (almost) all platforms can use ++ * ++ * Author: Johnnie Peters ++ * Editor: Tom Rini ++ * ++ * Derived from arch/ppc/boot/prep/misc.c ++ * ++ * Ported by Pete Popov to ++ * support mips board(s). I also got rid of the vga console ++ * code. ++ * ++ * Copyright 2000-2001 MontaVista Software Inc. ++ * ++ * Ported to MIPS 2.6 by Pete Popov, ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include /* for va_ bits */ ++#include ++#include ++#include ++ ++extern char *avail_ram; ++extern char *end_avail; ++extern char _end[]; ++ ++void puts(const char *); ++void putc(const char c); ++void puthex(unsigned long val); ++void _bcopy(char *src, char *dst, int len); ++void gunzip(void *, int, unsigned char *, int *); ++static int _cvt(unsigned long val, char *buf, long radix, char *digits); ++ ++void _vprintk(void(*)(const char), const char *, va_list ap); ++ ++struct NS16550 *com_port; ++ ++int serial_tstc(volatile struct NS16550 *); ++unsigned char serial_getc(volatile struct NS16550 *); ++void serial_putc(volatile struct NS16550 *, unsigned char); ++ ++void pause(void) ++{ ++ puts("pause\n"); ++} ++ ++void exit(void) ++{ ++ puts("exit\n"); ++ while(1); ++} ++ ++int tstc(void) ++{ ++ return (serial_tstc(com_port)); ++} ++ ++int getc(void) ++{ ++ while (1) { ++ if (serial_tstc(com_port)) ++ return (serial_getc(com_port)); ++ } ++} ++ ++void ++putc(const char c) ++{ ++ serial_putc(com_port, c); ++ if ( c == '\n' ) ++ serial_putc(com_port, '\r'); ++} ++ ++void puts(const char *s) ++{ ++ char c; ++ while ( ( c = *s++ ) != '\0' ) { ++ serial_putc(com_port, c); ++ if ( c == '\n' ) serial_putc(com_port, '\r'); ++ } ++} ++ ++void error(char *x) ++{ ++ puts("\n\n"); ++ puts(x); ++ puts("\n\n -- System halted"); ++ ++ while(1); /* Halt */ ++} ++ ++static void *zalloc(unsigned size) ++{ ++ void *p = avail_ram; ++ ++ size = (size + 7) & -8; ++ avail_ram += size; ++ if (avail_ram > end_avail) { ++ puts("oops... out of memory\n"); ++ pause(); ++ } ++ return p; ++} ++ ++ ++#define HEAD_CRC 2 ++#define EXTRA_FIELD 4 ++#define ORIG_NAME 8 ++#define COMMENT 0x10 ++#define RESERVED 0xe0 ++ ++#define DEFLATED 8 ++ ++void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) ++{ ++ z_stream s; ++ int r, i, flags; ++ ++ /* skip header */ ++ i = 10; ++ flags = src[3]; ++ if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) { ++ puts("bad gzipped data\n"); ++ exit(); ++ } ++ if ((flags & EXTRA_FIELD) != 0) ++ i = 12 + src[10] + (src[11] << 8); ++ if ((flags & ORIG_NAME) != 0) ++ while (src[i++] != 0) ++ ; ++ if ((flags & COMMENT) != 0) ++ while (src[i++] != 0) ++ ; ++ if ((flags & HEAD_CRC) != 0) ++ i += 2; ++ if (i >= *lenp) { ++ puts("gunzip: ran out of data in header\n"); ++ exit(); ++ } ++ ++ /* Initialize ourself. */ ++ s.workspace = zalloc(zlib_inflate_workspacesize()); ++ r = zlib_inflateInit2(&s, -MAX_WBITS); ++ if (r != Z_OK) { ++ puts("zlib_inflateInit2 returned "); puthex(r); puts("\n"); ++ exit(); ++ } ++ s.next_in = src + i; ++ s.avail_in = *lenp - i; ++ s.next_out = dst; ++ s.avail_out = dstlen; ++ r = zlib_inflate(&s, Z_FINISH); ++ if (r != Z_OK && r != Z_STREAM_END) { ++ puts("inflate returned "); puthex(r); puts("\n"); ++ exit(); ++ } ++ *lenp = s.next_out - (unsigned char *) dst; ++ zlib_inflateEnd(&s); ++} ++ ++void ++puthex(unsigned long val) ++{ ++ ++ unsigned char buf[10]; ++ int i; ++ for (i = 7; i >= 0; i--) ++ { ++ buf[i] = "0123456789ABCDEF"[val & 0x0F]; ++ val >>= 4; ++ } ++ buf[8] = '\0'; ++ puts(buf); ++} ++ ++#define FALSE 0 ++#define TRUE 1 ++ ++void ++_printk(char const *fmt, ...) ++{ ++ va_list ap; ++ ++ va_start(ap, fmt); ++ _vprintk(putc, fmt, ap); ++ va_end(ap); ++ return; ++} ++ ++#define is_digit(c) ((c >= '0') && (c <= '9')) ++ ++void ++_vprintk(void(*putc)(const char), const char *fmt0, va_list ap) ++{ ++ char c, sign, *cp = 0; ++ int left_prec, right_prec, zero_fill, length = 0, pad, pad_on_right; ++ char buf[32]; ++ long val; ++ while ((c = *fmt0++)) ++ { ++ if (c == '%') ++ { ++ c = *fmt0++; ++ left_prec = right_prec = pad_on_right = 0; ++ if (c == '-') ++ { ++ c = *fmt0++; ++ pad_on_right++; ++ } ++ if (c == '0') ++ { ++ zero_fill = TRUE; ++ c = *fmt0++; ++ } else ++ { ++ zero_fill = FALSE; ++ } ++ while (is_digit(c)) ++ { ++ left_prec = (left_prec * 10) + (c - '0'); ++ c = *fmt0++; ++ } ++ if (c == '.') ++ { ++ c = *fmt0++; ++ zero_fill++; ++ while (is_digit(c)) ++ { ++ right_prec = (right_prec * 10) + (c - '0'); ++ c = *fmt0++; ++ } ++ } else ++ { ++ right_prec = left_prec; ++ } ++ sign = '\0'; ++ switch (c) ++ { ++ case 'd': ++ case 'x': ++ case 'X': ++ val = va_arg(ap, long); ++ switch (c) ++ { ++ case 'd': ++ if (val < 0) ++ { ++ sign = '-'; ++ val = -val; ++ } ++ length = _cvt(val, buf, 10, "0123456789"); ++ break; ++ case 'x': ++ length = _cvt(val, buf, 16, "0123456789abcdef"); ++ break; ++ case 'X': ++ length = _cvt(val, buf, 16, "0123456789ABCDEF"); ++ break; ++ } ++ cp = buf; ++ break; ++ case 's': ++ cp = va_arg(ap, char *); ++ length = strlen(cp); ++ break; ++ case 'c': ++ c = va_arg(ap, long /*char*/); ++ (*putc)(c); ++ continue; ++ default: ++ (*putc)('?'); ++ } ++ pad = left_prec - length; ++ if (sign != '\0') ++ { ++ pad--; ++ } ++ if (zero_fill) ++ { ++ c = '0'; ++ if (sign != '\0') ++ { ++ (*putc)(sign); ++ sign = '\0'; ++ } ++ } else ++ { ++ c = ' '; ++ } ++ if (!pad_on_right) ++ { ++ while (pad-- > 0) ++ { ++ (*putc)(c); ++ } ++ } ++ if (sign != '\0') ++ { ++ (*putc)(sign); ++ } ++ while (length-- > 0) ++ { ++ (*putc)(c = *cp++); ++ if (c == '\n') ++ { ++ (*putc)('\r'); ++ } ++ } ++ if (pad_on_right) ++ { ++ while (pad-- > 0) ++ { ++ (*putc)(c); ++ } ++ } ++ } else ++ { ++ (*putc)(c); ++ if (c == '\n') ++ { ++ (*putc)('\r'); ++ } ++ } ++ } ++} ++ ++int ++_cvt(unsigned long val, char *buf, long radix, char *digits) ++{ ++ char temp[80]; ++ char *cp = temp; ++ int length = 0; ++ if (val == 0) ++ { /* Special case */ ++ *cp++ = '0'; ++ } else ++ while (val) ++ { ++ *cp++ = digits[val % radix]; ++ val /= radix; ++ } ++ while (cp != temp) ++ { ++ *buf++ = *--cp; ++ length++; ++ } ++ *buf = '\0'; ++ return (length); ++} ++ ++void ++_dump_buf_with_offset(unsigned char *p, int s, unsigned char *base) ++{ ++ int i, c; ++ if ((unsigned int)s > (unsigned int)p) ++ { ++ s = (unsigned int)s - (unsigned int)p; ++ } ++ while (s > 0) ++ { ++ if (base) ++ { ++ _printk("%06X: ", (int)p - (int)base); ++ } else ++ { ++ _printk("%06X: ", p); ++ } ++ for (i = 0; i < 16; i++) ++ { ++ if (i < s) ++ { ++ _printk("%02X", p[i] & 0xFF); ++ } else ++ { ++ _printk(" "); ++ } ++ if ((i % 2) == 1) _printk(" "); ++ if ((i % 8) == 7) _printk(" "); ++ } ++ _printk(" |"); ++ for (i = 0; i < 16; i++) ++ { ++ if (i < s) ++ { ++ c = p[i] & 0xFF; ++ if ((c < 0x20) || (c >= 0x7F)) c = '.'; ++ } else ++ { ++ c = ' '; ++ } ++ _printk("%c", c); ++ } ++ _printk("|\n"); ++ s -= 16; ++ p += 16; ++ } ++} ++ ++void ++_dump_buf(unsigned char *p, int s) ++{ ++ _printk("\n"); ++ _dump_buf_with_offset(p, s, 0); ++} ++ ++/* ++ * Local variables: ++ * c-indent-level: 8 ++ * c-basic-offset: 8 ++ * tab-width: 8 ++ * End: ++ */ +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c 2006-04-20 19:27:22.000000000 +0200 +@@ -0,0 +1,122 @@ ++/* ++ * arch/mips/zboot/common/misc-simple.c ++ * ++ * Misc. bootloader code for many machines. This assumes you have are using ++ * a 6xx/7xx/74xx CPU in your machine. This assumes the chunk of memory ++ * below 8MB is free. Finally, it assumes you have a NS16550-style uart for ++ * your serial console. If a machine meets these requirements, it can quite ++ * likely use this code during boot. ++ * ++ * Author: Matt Porter ++ * Derived from arch/ppc/boot/prep/misc.c ++ * ++ * Copyright 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#include ++#include ++#include ++ ++#include ++ ++#include "linux/zlib.h" ++ ++extern struct NS16550 *com_port; ++ ++char *avail_ram; ++char *end_avail; ++extern char _end[]; ++char *zimage_start; ++ ++#ifdef CONFIG_CMDLINE ++#define CMDLINE CONFIG_CMDLINE ++#else ++#define CMDLINE "" ++#endif ++char cmd_preset[] = CMDLINE; ++char cmd_buf[256]; ++char *cmd_line = cmd_buf; ++ ++/* The linker tells us where the image is. ++*/ ++extern unsigned char __image_begin, __image_end; ++extern unsigned char __ramdisk_begin, __ramdisk_end; ++unsigned long initrd_size; ++ ++extern void puts(const char *); ++extern void putc(const char c); ++extern void puthex(unsigned long val); ++extern void *memcpy(void * __dest, __const void * __src, ++ __kernel_size_t __n); ++extern void gunzip(void *, int, unsigned char *, int *); ++extern void udelay(long delay); ++extern int tstc(void); ++extern int getc(void); ++extern volatile struct NS16550 *serial_init(int chan); ++ ++void ++decompress_kernel(unsigned long load_addr, int num_words, ++ unsigned long cksum, unsigned long *sp) ++{ ++ extern unsigned long start; ++ int zimage_size; ++ ++ com_port = (struct NS16550 *)serial_init(0); ++ ++ initrd_size = (unsigned long)(&__ramdisk_end) - ++ (unsigned long)(&__ramdisk_begin); ++ ++ /* ++ * Reveal where we were loaded at and where we ++ * were relocated to. ++ */ ++ puts("loaded at: "); puthex(load_addr); ++ puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n"); ++ if ( (unsigned long)load_addr != (unsigned long)&start ) ++ { ++ puts("relocated to: "); puthex((unsigned long)&start); ++ puts(" "); ++ puthex((unsigned long)((unsigned long)&start + (4*num_words))); ++ puts("\n"); ++ } ++ ++ /* ++ * We link ourself to an arbitrary low address. When we run, we ++ * relocate outself to that address. __image_being points to ++ * the part of the image where the zImage is. -- Tom ++ */ ++ zimage_start = (char *)(unsigned long)(&__image_begin); ++ zimage_size = (unsigned long)(&__image_end) - ++ (unsigned long)(&__image_begin); ++ ++ /* ++ * The zImage and initrd will be between start and _end, so they've ++ * already been moved once. We're good to go now. -- Tom ++ */ ++ puts("zimage at: "); puthex((unsigned long)zimage_start); ++ puts(" "); puthex((unsigned long)(zimage_size+zimage_start)); ++ puts("\n"); ++ ++ if ( initrd_size ) { ++ puts("initrd at: "); ++ puthex((unsigned long)(&__ramdisk_begin)); ++ puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); ++ } ++ ++ /* assume the chunk below 8M is free */ ++ avail_ram = (char *)AVAIL_RAM_START; ++ end_avail = (char *)AVAIL_RAM_END; ++ ++ /* Display standard Linux/MIPS boot prompt for kernel args */ ++ puts("Uncompressing Linux at load address "); ++ puthex(LOADADDR); ++ puts("\n"); ++ /* I don't like this hard coded gunzip size (fixme) */ ++ gunzip((void *)LOADADDR, 0x400000, zimage_start, &zimage_size); ++ puts("Now booting the kernel\n"); ++} +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c +--- linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,2 @@ ++char initrd_data[1]; ++int initrd_len = 0; +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,17 @@ ++ ++# ++# This dir holds all of the images for MIPS machines. ++# Tom Rini January 2001 ++# Pete Popov 2004 ++ ++extra-y := vmlinux.bin vmlinux.gz ++ ++OBJCOPYFLAGS_vmlinux.bin := -O binary ++$(obj)/vmlinux.bin: vmlinux FORCE ++ $(call if_changed,objcopy) ++ ++$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE ++ $(call if_changed,gzip) ++ ++# Files generated that shall be removed upon make clean ++clean-files := vmlinux* zImage* +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h +--- linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,18 @@ ++/* ++ * Copyright (C) Paul Mackerras 1997. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++typedef int FILE; ++extern FILE *stdin, *stdout; ++#define NULL ((void *)0) ++#define EOF (-1) ++#define fopen(n, m) NULL ++#define fflush(f) 0 ++#define fclose(f) 0 ++extern char *fgets(); ++ ++#define perror(s) printf("%s: no files!\n", (s)) +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h +--- linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,46 @@ ++/* ++ * NS16550 Serial Port ++ */ ++ ++/* ++ * Figure out which file will have the definitons of COMx ++ */ ++ ++/* Some machines have their uart registers 16 bytes apart. Most don't. ++ * TODO: Make this work like drivers/char/serial does - Tom */ ++#if !defined(UART_REG_PAD) ++#define UART_REG_PAD(x) ++#endif ++ ++struct NS16550 ++ { ++ unsigned char rbr; /* 0 */ ++ UART_REG_PAD(rbr) ++ unsigned char ier; /* 1 */ ++ UART_REG_PAD(ier) ++ unsigned char fcr; /* 2 */ ++ UART_REG_PAD(fcr) ++ unsigned char lcr; /* 3 */ ++ UART_REG_PAD(lcr) ++ unsigned char mcr; /* 4 */ ++ UART_REG_PAD(mcr) ++ unsigned char lsr; /* 5 */ ++ UART_REG_PAD(lsr) ++ unsigned char msr; /* 6 */ ++ UART_REG_PAD(msr) ++ unsigned char scr; /* 7 */ ++ }; ++ ++#define thr rbr ++#define iir fcr ++#define dll rbr ++#define dlm ier ++ ++#define LSR_DR 0x01 /* Data ready */ ++#define LSR_OE 0x02 /* Overrun */ ++#define LSR_PE 0x04 /* Parity error */ ++#define LSR_FE 0x08 /* Framing error */ ++#define LSR_BI 0x10 /* Break */ ++#define LSR_THRE 0x20 /* Xmit holding register empty */ ++#define LSR_TEMT 0x40 /* Xmitter empty */ ++#define LSR_ERR 0x80 /* Error */ +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h +--- linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,20 @@ ++/* ++ * arch/ppc/boot/include/sandpoint_serial.h ++ * ++ * Location of the COM ports on Motorola SPS Sandpoint machines ++ * ++ * Author: Mark A. Greer ++ * mgreer@mvista.com ++ * ++ * Copyright 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#define COM1 0xfe0003f8 ++#define COM2 0xfe0002f8 ++#define COM3 0x00000000 /* No COM3 */ ++#define COM4 0x00000000 /* No COM4 */ +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/ld.script linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script +--- linux-2.6.16.7/arch/mips/boot/compressed/ld.script 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,151 @@ ++OUTPUT_ARCH(mips) ++ENTRY(start) ++SECTIONS ++{ ++ /* Read-only sections, merged into text segment: */ ++ /* . = 0x81000000; */ ++ .init : { *(.init) } =0 ++ .text : ++ { ++ _ftext = . ; ++ *(.text) ++ *(.rodata) *(.rodata.*) ++ *(.rodata1) ++ /* .gnu.warning sections are handled specially by elf32.em. */ ++ *(.gnu.warning) ++ } =0 ++ .kstrtab : { *(.kstrtab) } ++ ++ . = ALIGN(16); /* Exception table */ ++ __start___ex_table = .; ++ __ex_table : { *(__ex_table) } ++ __stop___ex_table = .; ++ ++ __start___dbe_table = .; /* Exception table for data bus errors */ ++ __dbe_table : { *(__dbe_table) } ++ __stop___dbe_table = .; ++ ++ __start___ksymtab = .; /* Kernel symbol table */ ++ __ksymtab : { *(__ksymtab) } ++ __stop___ksymtab = .; ++ ++ _etext = .; ++ ++ . = ALIGN(8192); ++ .data.init_task : { *(.data.init_task) } ++ ++ /* Startup code */ ++ . = ALIGN(4096); ++ __init_begin = .; ++ .text.init : { *(.text.init) } ++ .data.init : { *(.data.init) } ++ . = ALIGN(16); ++ __setup_start = .; ++ .setup.init : { *(.setup.init) } ++ __setup_end = .; ++ __initcall_start = .; ++ .initcall.init : { *(.initcall.init) } ++ __initcall_end = .; ++ . = ALIGN(4096); /* Align double page for init_task_union */ ++ __init_end = .; ++ ++ . = ALIGN(4096); ++ .data.page_aligned : { *(.data.idt) } ++ ++ . = ALIGN(32); ++ .data.cacheline_aligned : { *(.data.cacheline_aligned) } ++ ++ .fini : { *(.fini) } =0 ++ .reginfo : { *(.reginfo) } ++ /* Adjust the address for the data segment. We want to adjust up to ++ the same address within the page on the next page up. It would ++ be more correct to do this: ++ . = .; ++ The current expression does not correctly handle the case of a ++ text segment ending precisely at the end of a page; it causes the ++ data segment to skip a page. The above expression does not have ++ this problem, but it will currently (2/95) cause BFD to allocate ++ a single segment, combining both text and data, for this case. ++ This will prevent the text segment from being shared among ++ multiple executions of the program; I think that is more ++ important than losing a page of the virtual address space (note ++ that no actual memory is lost; the page which is skipped can not ++ be referenced). */ ++ . = .; ++ .data : ++ { ++ _fdata = . ; ++ *(.data) ++ ++ /* Put the compressed image here, so bss is on the end. */ ++ __image_begin = .; ++ *(.image) ++ __image_end = .; ++ /* Align the initial ramdisk image (INITRD) on page boundaries. */ ++ . = ALIGN(4096); ++ __ramdisk_begin = .; ++ *(.initrd) ++ __ramdisk_end = .; ++ . = ALIGN(4096); ++ ++ CONSTRUCTORS ++ } ++ .data1 : { *(.data1) } ++ _gp = . + 0x8000; ++ .lit8 : { *(.lit8) } ++ .lit4 : { *(.lit4) } ++ .ctors : { *(.ctors) } ++ .dtors : { *(.dtors) } ++ .got : { *(.got.plt) *(.got) } ++ .dynamic : { *(.dynamic) } ++ /* We want the small data sections together, so single-instruction offsets ++ can access them all, and initialized data all before uninitialized, so ++ we can shorten the on-disk segment size. */ ++ .sdata : { *(.sdata) } ++ . = ALIGN(4); ++ _edata = .; ++ PROVIDE (edata = .); ++ ++ __bss_start = .; ++ _fbss = .; ++ .sbss : { *(.sbss) *(.scommon) } ++ .bss : ++ { ++ *(.dynbss) ++ *(.bss) ++ *(COMMON) ++ . = ALIGN(4); ++ _end = . ; ++ PROVIDE (end = .); ++ } ++ ++ /* Sections to be discarded */ ++ /DISCARD/ : ++ { ++ *(.text.exit) ++ *(.data.exit) ++ *(.exitcall.exit) ++ } ++ ++ /* This is the MIPS specific mdebug section. */ ++ .mdebug : { *(.mdebug) } ++ /* These are needed for ELF backends which have not yet been ++ converted to the new style linker. */ ++ .stab 0 : { *(.stab) } ++ .stabstr 0 : { *(.stabstr) } ++ /* DWARF debug sections. ++ Symbols in the .debug DWARF section are relative to the beginning of the ++ section so we begin .debug at 0. It's not clear yet what needs to happen ++ for the others. */ ++ .debug 0 : { *(.debug) } ++ .debug_srcinfo 0 : { *(.debug_srcinfo) } ++ .debug_aranges 0 : { *(.debug_aranges) } ++ .debug_pubnames 0 : { *(.debug_pubnames) } ++ .debug_sfnames 0 : { *(.debug_sfnames) } ++ .line 0 : { *(.line) } ++ /* These must appear regardless of . */ ++ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } ++ .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } ++ .comment : { *(.comment) } ++ .note : { *(.note) } ++} +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile +--- linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,11 @@ ++ ++# ++# Makefile for some libs needed by zImage. ++# ++ ++lib-y := $(addprefix ../../../../../lib/zlib_inflate/, \ ++ infblock.o infcodes.o inffast.o inflate.o inftrees.o infutil.o) \ ++ $(addprefix ../../../../../lib/, ctype.o string.o) \ ++ $(addprefix ../../../../../arch/mips/lib/, memcpy.o) \ ++ ++ +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/entry linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry +--- linux-2.6.16.7/arch/mips/boot/compressed/utils/entry 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,12 @@ ++#!/bin/sh ++ ++# grab the kernel_entry address from the vmlinux elf image ++entry=`$1 $2 | grep kernel_entry` ++ ++fs=`echo $entry | grep ffffffff` # check toolchain output ++ ++if [ -n "$fs" ]; then ++ echo "0x"`$1 $2 | grep kernel_entry | cut -c9- | awk '{print $1}'` ++else ++ echo "0x"`$1 $2 | grep kernel_entry | cut -c1- | awk '{print $1}'` ++fi +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/offset linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset +--- linux-2.6.16.7/arch/mips/boot/compressed/utils/offset 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,3 @@ ++#!/bin/sh ++ ++echo "0x"`$1 -h $2 | grep $3 | grep -v zvmlinux| awk '{print $6}'` +diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/size linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size +--- linux-2.6.16.7/arch/mips/boot/compressed/utils/size 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size 2006-04-20 19:27:12.000000000 +0200 +@@ -0,0 +1,4 @@ ++#!/bin/sh ++ ++OFFSET=`$1 -h $2 | grep $3 | grep -v zvmlinux | awk '{print $3}'` ++echo "0x"$OFFSET diff --git a/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch b/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch new file mode 100644 index 0000000000..3edd749bb8 --- /dev/null +++ b/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch @@ -0,0 +1,285 @@ +diff -urN linux-2.6.16.7/drivers/char/watchdog/Kconfig linux-2.6.16.7.new/drivers/char/watchdog/Kconfig +--- linux-2.6.16.7/drivers/char/watchdog/Kconfig 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/char/watchdog/Kconfig 2006-04-22 16:40:32.000000000 +0200 +@@ -460,6 +460,14 @@ + timer expired and no process has written to /dev/watchdog during + that time. + ++config MTX1_WATCHDOG ++ tristate "MTX-1 Hardware Watchdog" ++ depends on WATCHDOG && MIPS_MTX1 ++ help ++ Hardware driver for the AccessCube MTX-1 watchdog. This is a ++ watchdog timer that will reboot the machine after a 100 seconds ++ timer expired. ++ + # S390 Architecture + + config ZVM_WATCHDOG +diff -urN linux-2.6.16.7/drivers/char/watchdog/Makefile linux-2.6.16.7.new/drivers/char/watchdog/Makefile +--- linux-2.6.16.7/drivers/char/watchdog/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/char/watchdog/Makefile 2006-04-22 16:38:31.000000000 +0200 +@@ -65,6 +65,7 @@ + + # MIPS Architecture + obj-$(CONFIG_INDYDOG) += indydog.o ++obj-$(CONFIG_MTX1_WATCHDOG) += mtx-1_watchdog.o + + # S390 Architecture + +diff -urN linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c +--- linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c 2006-04-22 16:38:49.000000000 +0200 +@@ -0,0 +1,252 @@ ++/* ++ * Driver for the MTX-1 Watchdog. ++ * ++ * (c) Copyright 2005 4G Systems , All Rights Reserved. ++ * http://www.4g-systems.biz ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ * Neither Michael Stickel nor 4G Systems admit liability nor provide ++ * warranty for any of this software. This material is provided ++ * "AS-IS" and at no charge. ++ * ++ * (c) Copyright 2005 4G Systems ++ * ++ * Release 0.01. ++ * ++ * Author: Michael Stickel michael.stickel@4g-systems.biz ++ * ++ * ++ * The Watchdog is configured to reset the MTX-1 ++ * if it is not triggered for 100 seconds. ++ * It should not be triggered more often than 1.6 seconds. ++ * ++ * A timer triggers the watchdog every 5 seconds, until ++ * it is opened for the first time. After the first open ++ * it MUST be triggered every 2..95 seconds. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#ifndef FALSE ++# define FALSE (0) ++#endif ++ ++#ifndef TRUE ++# define TRUE (!FALSE) ++#endif ++ ++ ++//---------[ Hardware Functions ]----------------- ++ ++static void mtx1_trigger_wd (void) ++{ ++ /* ++ * toggle GPIO2_15 ++ */ ++ ++ u32 tmp = au_readl(GPIO2_DIR); ++ tmp = (tmp & ~(1<<15)) | ((~tmp) & (1<<15)); ++ au_writel (tmp, GPIO2_DIR); ++} ++ ++static void mtx1_enable_wd (void) ++{ ++ au_writel (au_readl(GPIO2_DIR) | (u32)(1<<15), GPIO2_DIR); ++} ++ ++static void mtx1_disable_wd (void) ++{ ++ au_writel (au_readl(GPIO2_DIR) & ~((u32)(1<<15)), GPIO2_DIR); ++} ++ ++ ++//---------[ Timer Functions ]----------------- ++ ++static struct timer_list wd_trigger_timer; ++static char timer_is_running = FALSE; ++ ++static void wd_timer_callback (unsigned long data) ++{ ++ if (timer_is_running) ++ mod_timer (&wd_trigger_timer, jiffies + 5 * HZ); ++ mtx1_trigger_wd (); ++} ++ ++static void start_wd_timer (void) ++{ ++ if (!timer_is_running) { ++ struct timer_list *t = &wd_trigger_timer; ++ ++ init_timer (t); ++ t->function = wd_timer_callback; ++ t->data = (unsigned long)0L; ++ t->expires = jiffies + 5 * HZ; // 5 seconds. ++ add_timer (t); ++ timer_is_running = TRUE; ++ } ++} ++ ++ ++ ++static void stop_wd_timer (void) ++{ ++ if (timer_is_running) { ++ del_timer(&wd_trigger_timer); ++ timer_is_running = FALSE; ++ } ++} ++ ++ ++//---------[ File Functions ]----------------- ++ ++static char restart_after_close; ++ ++static int mtx1wd_open (struct inode *inode, struct file *file) ++{ ++ if (MINOR(inode->i_rdev) != WATCHDOG_MINOR) return -ENODEV; ++ //MOD_INC_USE_COUNT; ++ ++ // stop the timer, if it is running. It will not be ++ // started again, until the module is loaded again. ++ stop_wd_timer(); ++ ++ // sleep for 2 seconds, to ensure, that the wd is ++ // not triggered more often than every 2 seconds. ++ schedule_timeout (2 * HZ); ++ ++ return 0; ++} ++ ++ ++static int mtx1wd_release (struct inode *inode, struct file *file) { ++ if (MINOR(inode->i_rdev)==WATCHDOG_MINOR) { ++ } ++ if (restart_after_close) ++ start_wd_timer(); ++ //MOD_DEC_USE_COUNT; ++ return 0; ++} ++ ++ ++static ssize_t mtx1wd_write (struct file *file, const char *buf, size_t count, loff_t *ppos) { ++ ++ mtx1_trigger_wd (); ++ ++ if (count > 0) { ++ char buffer[10]; ++ int n = (count>9)?9:count; ++ ++ if (copy_from_user (&buffer, buf, n)) ++ return -EFAULT; ++ buffer[n]=0; ++ ++ if (count >= 4 && strncmp("auto", buffer, 4)==0) ++ restart_after_close = 1; ++ ++ else if (count >= 6 && strncmp("manual", buffer, 6)==0) ++ restart_after_close = 0; ++ ++ return n; ++ } ++ ++ return 0; ++} ++ ++static ssize_t mtx1wd_read (struct file *file, char *buf, size_t count, loff_t *ppos) ++{ ++ char * state = restart_after_close ? "auto\n" : "manual\n"; ++ int n = strlen(state)+1; ++ ++ if (file->f_pos >= n) ++ return 0; ++ ++ if (count < n) ++ return -EINVAL; ++ ++ if(copy_to_user(buf, state, n)) ++ return -EFAULT; ++ ++ file->f_pos += n; ++ ++ return n; ++} ++ ++static struct file_operations mtx1wd_fops = { ++ .owner = THIS_MODULE, ++ .read = mtx1wd_read, ++ .write = mtx1wd_write, ++ .open = mtx1wd_open, ++ .release = mtx1wd_release ++}; ++ ++ ++static struct miscdevice mtx1wd_miscdev = { ++ WATCHDOG_MINOR, ++ "watchdog", ++ &mtx1wd_fops ++}; ++ ++ ++ ++//---------[ Module Functions ]----------------- ++ ++ ++void cleanup_module (void) ++{ ++ // stop the timer, if it is running. ++ stop_wd_timer(); ++ ++ misc_deregister(&mtx1wd_miscdev); ++ ++ mtx1_disable_wd (); ++} ++ ++ ++static int __init init_mtx1_watchdog(void) ++{ ++ printk("MTX-1 watchdog driver\n"); ++ ++ misc_register(&mtx1wd_miscdev); ++ ++ restart_after_close = 0; ++ ++ mtx1_enable_wd (); ++ ++ //-- trigger it for the first time. ++ //-- We do not exactly know how long it has not been triggered. ++ mtx1_trigger_wd (); ++ ++ // start a timer, that calls mtx1_trigger_wd every 5 seconds. ++ start_wd_timer(); ++ ++ return 0; ++} ++ ++static void __exit exit_mtx1_watchdog(void) { ++ ++ misc_deregister(&mtx1wd_miscdev); ++} ++ ++module_init(init_mtx1_watchdog); ++module_exit(exit_mtx1_watchdog); ++ ++MODULE_AUTHOR("Michael Stickel"); ++MODULE_DESCRIPTION("Driver for the MTX-1 watchdog"); ++MODULE_LICENSE("GPL"); -- 2.25.1