From c8b2e364b662c76b04da2eb4a3516bf333f55279 Mon Sep 17 00:00:00 2001 From: Chuanhua Han Date: Fri, 26 Jul 2019 20:25:35 +0800 Subject: [PATCH] armv8: ls1088aqds: Add support of I2C driver model. Udate ls1088aqds board init code to support DM_I2C. Signed-off-by: Chuanhua Han Reviewed-by: Prabhakar Kushwaha --- board/freescale/ls1088a/eth_ls1088aqds.c | 149 ++++++++++++++++------- include/configs/ls1088aqds.h | 4 +- 2 files changed, 104 insertions(+), 49 deletions(-) diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c index d4ab9791e9..237088a537 100644 --- a/board/freescale/ls1088a/eth_ls1088aqds.c +++ b/board/freescale/ls1088a/eth_ls1088aqds.c @@ -81,11 +81,16 @@ struct ls1088a_qds_mdio { struct mii_dev *realbus; }; +struct reg_pair { + uint addr; + u8 *val; +}; + static void sgmii_configure_repeater(int dpmac) { struct mii_dev *bus; uint8_t a = 0xf; - int i, j, ret; + int i, j, k, ret; unsigned short value; const char *dev = "LS1088A_QDS_MDIO2"; int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b}; @@ -97,8 +102,28 @@ static void sgmii_configure_repeater(int dpmac) uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; + u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20}; + struct reg_pair reg_pair[10] = { + {6, ®_val[0]}, {4, ®_val[1]}, + {8, ®_val[2]}, {0xf, NULL}, + {0x11, NULL}, {0x16, NULL}, + {0x18, NULL}, {0x23, ®_val[3]}, + {0x2d, ®_val[4]}, {4, ®_val[5]}, + }; +#ifdef CONFIG_DM_I2C + struct udevice *udev; +#endif + /* Set I2c to Slot 1 */ - i2c_write(0x77, 0, 0, &a, 1); +#ifndef CONFIG_DM_I2C + ret = i2c_write(0x77, 0, 0, &a, 1); +#else + ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev); + if (!ret) + ret = dm_i2c_write(udev, 0, &a, 1); +#endif + if (ret) + goto error; switch (dpmac) { case 1: @@ -144,31 +169,34 @@ static void sgmii_configure_repeater(int dpmac) return; } +#ifdef CONFIG_DM_I2C + i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev); +#endif + for (i = 0; i < 4; i++) { for (j = 0; j < 4; j++) { - a = 0x18; - i2c_write(i2c_phy_addr, 6, 1, &a, 1); - a = 0x38; - i2c_write(i2c_phy_addr, 4, 1, &a, 1); - a = 0x4; - i2c_write(i2c_phy_addr, 8, 1, &a, 1); - - i2c_write(i2c_phy_addr, 0xf, 1, - &ch_a_eq[i], 1); - i2c_write(i2c_phy_addr, 0x11, 1, - &ch_a_ctl2[j], 1); - - i2c_write(i2c_phy_addr, 0x16, 1, - &ch_b_eq[i], 1); - i2c_write(i2c_phy_addr, 0x18, 1, - &ch_b_ctl2[j], 1); - - a = 0x14; - i2c_write(i2c_phy_addr, 0x23, 1, &a, 1); - a = 0xb5; - i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1); - a = 0x20; - i2c_write(i2c_phy_addr, 4, 1, &a, 1); + reg_pair[3].val = &ch_a_eq[i]; + reg_pair[4].val = &ch_a_ctl2[j]; + reg_pair[5].val = &ch_b_eq[i]; + reg_pair[6].val = &ch_b_ctl2[j]; + for (k = 0; k < 10; k++) { +#ifndef CONFIG_DM_I2C + ret = i2c_write(i2c_phy_addr, + reg_pair[k].addr, + 1, reg_pair[k].val, 1); +#else + ret = i2c_get_chip_for_busnum(0, + i2c_phy_addr, + 1, &udev); + if (!ret) + ret = dm_i2c_write(udev, + reg_pair[k].addr, + reg_pair[k].val, 1); +#endif + if (ret) + goto error; + } + mdelay(100); ret = miiphy_read(dev, phy_addr, 0x11, &value); if (ret > 0) @@ -203,7 +231,7 @@ error: static void qsgmii_configure_repeater(int dpmac) { uint8_t a = 0xf; - int i, j; + int i, j, k; int i2c_phy_addr = 0; int phy_addr = 0; int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b}; @@ -213,12 +241,32 @@ static void qsgmii_configure_repeater(int dpmac) uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; + u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20}; + struct reg_pair reg_pair[10] = { + {6, ®_val[0]}, {4, ®_val[1]}, + {8, ®_val[2]}, {0xf, NULL}, + {0x11, NULL}, {0x16, NULL}, + {0x18, NULL}, {0x23, ®_val[3]}, + {0x2d, ®_val[4]}, {4, ®_val[5]}, + }; + const char *dev = mdio_names[EMI1_SLOT1]; int ret = 0; unsigned short value; +#ifdef CONFIG_DM_I2C + struct udevice *udev; +#endif /* Set I2c to Slot 1 */ - i2c_write(0x77, 0, 0, &a, 1); +#ifndef CONFIG_DM_I2C + ret = i2c_write(0x77, 0, 0, &a, 1); +#else + ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev); + if (!ret) + ret = dm_i2c_write(udev, 0, &a, 1); +#endif + if (ret) + goto error; switch (dpmac) { case 7: @@ -252,28 +300,35 @@ static void qsgmii_configure_repeater(int dpmac) return; } +#ifdef CONFIG_DM_I2C + i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev); +#endif + for (i = 0; i < 4; i++) { for (j = 0; j < 4; j++) { - a = 0x18; - i2c_write(i2c_phy_addr, 6, 1, &a, 1); - a = 0x38; - i2c_write(i2c_phy_addr, 4, 1, &a, 1); - a = 0x4; - i2c_write(i2c_phy_addr, 8, 1, &a, 1); - - i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1); - i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1); - - i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1); - i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1); - - a = 0x14; - i2c_write(i2c_phy_addr, 0x23, 1, &a, 1); - a = 0xb5; - i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1); - a = 0x20; - i2c_write(i2c_phy_addr, 4, 1, &a, 1); - mdelay(100); + reg_pair[3].val = &ch_a_eq[i]; + reg_pair[4].val = &ch_a_ctl2[j]; + reg_pair[5].val = &ch_b_eq[i]; + reg_pair[6].val = &ch_b_ctl2[j]; + + for (k = 0; k < 10; k++) { +#ifndef CONFIG_DM_I2C + ret = i2c_write(i2c_phy_addr, + reg_pair[k].addr, + 1, reg_pair[k].val, 1); +#else + ret = i2c_get_chip_for_busnum(0, + i2c_addr[dpmac], + 1, &udev); + if (!ret) + ret = dm_i2c_write(udev, + reg_pair[k].addr, + reg_pair[k].val, 1); +#endif + if (ret) + goto error; + } + ret = miiphy_read(dev, phy_addr, 0x11, &value); if (ret > 0) goto error; diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 4387862582..8b62bbe684 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -46,7 +46,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DDR_CLK_FREQ 100000000 #else #define CONFIG_QIXIS_I2C_ACCESS +#ifndef CONFIG_DM_I2C #define CONFIG_SYS_I2C_EARLY_INIT +#endif #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() #endif @@ -357,9 +359,7 @@ unsigned long get_board_ddr_clk(void); * RTC configuration */ #define RTC -#define CONFIG_RTC_PCF8563 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ -#define CONFIG_CMD_DATE /* EEPROM */ #define CONFIG_ID_EEPROM -- 2.25.1