From c72f4d4c2ebb3be9797ef6cd7dcbc2124c825f7a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 22 Sep 2016 07:42:19 +0900 Subject: [PATCH] ARM: uniphier: add PLL init code for LD11 SoC - Initialize PLLs (SPL initializes only DPLL to save the precious SPL memory footprint) - Adjust CPLL/MPLL to the final tape-out frequency - Set the Cortex-A53 clock to the maximum frequency since it is running at 500MHz (SPLL/4) on startup Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/board_init.c | 1 + arch/arm/mach-uniphier/clk/Makefile | 5 ++-- arch/arm/mach-uniphier/clk/dpll-ld11.c | 16 +++++++++++++ arch/arm/mach-uniphier/clk/pll-ld11.c | 32 +++++++++++++++++++++++++ arch/arm/mach-uniphier/init.h | 2 ++ arch/arm/mach-uniphier/init/init-ld11.c | 6 +++-- arch/arm/mach-uniphier/sc64-regs.h | 16 ++++++++++--- 7 files changed, 71 insertions(+), 7 deletions(-) create mode 100644 arch/arm/mach-uniphier/clk/dpll-ld11.c create mode 100644 arch/arm/mach-uniphier/clk/pll-ld11.c diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c index b57a33f299..b9be52f6cb 100644 --- a/arch/arm/mach-uniphier/board_init.c +++ b/arch/arm/mach-uniphier/board_init.c @@ -128,6 +128,7 @@ int board_init(void) sg_set_pinsel(153, 14, 8, 4); /* XIRQ4 -> XIRQ4 */ sg_set_iectrl(153); led_puts("U1"); + uniphier_ld11_pll_init(); uniphier_ld11_clk_init(); break; #endif diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile index c8d59eabe3..95f433e87d 100644 --- a/arch/arm/mach-uniphier/clk/Makefile +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += early-clk-ld4.o dpll-sld8.o obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += early-clk-pro5.o obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += early-clk-pxs2.o obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += early-clk-pxs2.o -obj-$(CONFIG_ARCH_UNIPHIER_LD11) += early-clk-ld11.o +obj-$(CONFIG_ARCH_UNIPHIER_LD11) += early-clk-ld11.o dpll-ld11.o obj-$(CONFIG_ARCH_UNIPHIER_LD20) += early-clk-ld20.o dpll-ld20.o else @@ -23,9 +23,10 @@ obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-ld4.o pll-ld4.o dpll-tail.o obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-pro5.o obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-pxs2.o obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-pxs2.o -obj-$(CONFIG_ARCH_UNIPHIER_LD11) += clk-ld11.o +obj-$(CONFIG_ARCH_UNIPHIER_LD11) += clk-ld11.o pll-ld11.o obj-$(CONFIG_ARCH_UNIPHIER_LD20) += clk-ld20.o pll-ld20.o endif +obj-$(CONFIG_ARCH_UNIPHIER_LD11) += pll-base-ld20.o obj-$(CONFIG_ARCH_UNIPHIER_LD20) += pll-base-ld20.o diff --git a/arch/arm/mach-uniphier/clk/dpll-ld11.c b/arch/arm/mach-uniphier/clk/dpll-ld11.c new file mode 100644 index 0000000000..7f0677c0d4 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/dpll-ld11.c @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "../init.h" +#include "../sc64-regs.h" +#include "pll.h" + +int uniphier_ld11_dpll_init(const struct uniphier_board_data *bd) +{ + uniphier_ld20_sscpll_init(SC_DPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2); + + return 0; +} diff --git a/arch/arm/mach-uniphier/clk/pll-ld11.c b/arch/arm/mach-uniphier/clk/pll-ld11.c new file mode 100644 index 0000000000..8a4a748cfd --- /dev/null +++ b/arch/arm/mach-uniphier/clk/pll-ld11.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#include "../init.h" +#include "../sc64-regs.h" +#include "pll.h" + +void uniphier_ld11_pll_init(void) +{ + uniphier_ld20_sscpll_init(SC_CPLLCTRL, 1960, 1, 2); /* 2000MHz -> 1960MHz */ + /* do nothing for SPLL */ + uniphier_ld20_sscpll_init(SC_MPLLCTRL, 1600, 1, 2); /* 1500MHz -> 1600MHz */ + uniphier_ld20_sscpll_init(SC_VSPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2); + + mdelay(1); + + uniphier_ld20_sscpll_ssc_en(SC_CPLLCTRL); + uniphier_ld20_sscpll_ssc_en(SC_MPLLCTRL); + uniphier_ld20_sscpll_ssc_en(SC_VSPLLCTRL); + + uniphier_ld20_vpll27_init(SC_VPLL27FCTRL); + uniphier_ld20_vpll27_init(SC_VPLL27ACTRL); + + writel(0, SC_CA53_GEARSET); /* Gear0: CPLL/2 */ + writel(SC_CA_GEARUPD, SC_CA53_GEARUPD); +} diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h index 5c7cd6b6a4..4e3bee1cd3 100644 --- a/arch/arm/mach-uniphier/init.h +++ b/arch/arm/mach-uniphier/init.h @@ -87,6 +87,7 @@ int uniphier_sld3_dpll_init(const struct uniphier_board_data *bd); int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd); int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd); int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd); +int uniphier_ld11_dpll_init(const struct uniphier_board_data *bd); int uniphier_ld20_dpll_init(const struct uniphier_board_data *bd); int uniphier_ld4_early_clk_init(const struct uniphier_board_data *bd); @@ -105,6 +106,7 @@ int uniphier_ld11_umc_init(const struct uniphier_board_data *bd); void uniphier_sld3_pll_init(void); void uniphier_ld4_pll_init(void); void uniphier_pro4_pll_init(void); +void uniphier_ld11_pll_init(void); int uniphier_ld20_pll_init(const struct uniphier_board_data *bd); void uniphier_ld4_clk_init(void); diff --git a/arch/arm/mach-uniphier/init/init-ld11.c b/arch/arm/mach-uniphier/init/init-ld11.c index 758df8d269..e324c94700 100644 --- a/arch/arm/mach-uniphier/init/init-ld11.c +++ b/arch/arm/mach-uniphier/init/init-ld11.c @@ -31,12 +31,14 @@ int uniphier_ld11_init(const struct uniphier_board_data *bd) led_puts("L2"); - led_puts("L3"); - #ifdef CONFIG_SPL_SERIAL_SUPPORT preloader_console_init(); #endif + led_puts("L3"); + + uniphier_ld11_dpll_init(bd); + led_puts("L4"); { diff --git a/arch/arm/mach-uniphier/sc64-regs.h b/arch/arm/mach-uniphier/sc64-regs.h index 1e52bb1ef1..780fdd176f 100644 --- a/arch/arm/mach-uniphier/sc64-regs.h +++ b/arch/arm/mach-uniphier/sc64-regs.h @@ -13,12 +13,14 @@ #define SC_BASE_ADDR 0x61840000 /* PLL type: SSC */ -#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* LD20: CPU/ARM */ -#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* LD20: misc */ +#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* LD11/20: CPU/ARM */ +#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* LD11/20: misc */ #define SC_SPLL2CTRL (SC_BASE_ADDR | 0x1420) /* LD20: IPP */ -#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* LD20: Video codec */ +#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* LD11/20: Video codec */ +#define SC_VSPLLCTRL (SC_BASE_ADDR | 0x1440) /* LD11 */ #define SC_VPPLLCTRL (SC_BASE_ADDR | 0x1440) /* LD20: VPE etc. */ #define SC_GPPLLCTRL (SC_BASE_ADDR | 0x1450) /* LD20: GPU/Mali */ +#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1460) /* LD11: DDR memory */ #define SC_DPLL0CTRL (SC_BASE_ADDR | 0x1460) /* LD20: DDR memory 0 */ #define SC_DPLL1CTRL (SC_BASE_ADDR | 0x1470) /* LD20: DDR memory 1 */ #define SC_DPLL2CTRL (SC_BASE_ADDR | 0x1480) /* LD20: DDR memory 2 */ @@ -61,4 +63,12 @@ #define SC_CLKCTRL7_UMC31 (1 << 1) #define SC_CLKCTRL7_UMC30 (1 << 0) +#define SC_CA72_GEARST (SC_BASE_ADDR | 0x8080) +#define SC_CA72_GEARSET (SC_BASE_ADDR | 0x8084) +#define SC_CA72_GEARUPD (SC_BASE_ADDR | 0x8088) +#define SC_CA53_GEARST (SC_BASE_ADDR | 0x8080) +#define SC_CA53_GEARSET (SC_BASE_ADDR | 0x8084) +#define SC_CA53_GEARUPD (SC_BASE_ADDR | 0x8088) +#define SC_CA_GEARUPD (1 << 0) + #endif /* SC64_REGS_H */ -- 2.25.1