From c6cfcc91ea59d800672274a056eefa93a10711e9 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 18 Jul 2016 17:24:56 +0200 Subject: [PATCH] usb: ehci: ehci-marvell.c: Add Armada 3700 support (ARMv8) This patch adds DM based support for the Armada 3700 EHCI controller. The address windows don't need to get configured in this case. The difference here is detected via DT compatible property at runtime. With this support and the DM xHCI driver, both XHCI and eHCI can be used simultaniously on the MVEBU boards now. Signed-off-by: Stefan Roese Cc: Nadav Haklai Cc: Kostya Porotchkin Cc: Wilson Ding Cc: Victor Gu Cc: Hua Jing Cc: Terry Zhou Cc: Hanna Hawa Cc: Haim Boot Acked-by: Marek Vasut --- drivers/usb/host/ehci-marvell.c | 59 +++++++++++++++++++++++++++++---- 1 file changed, 52 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c index 253fcb3c96..464247035e 100644 --- a/drivers/usb/host/ehci-marvell.c +++ b/drivers/usb/host/ehci-marvell.c @@ -26,6 +26,16 @@ DECLARE_GLOBAL_DATA_PTR; #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4)) #define USB_TARGET_DRAM 0x0 +#define USB2_SBUSCFG_OFF 0x90 + +#define USB_SBUSCFG_BAWR_OFF 0x6 +#define USB_SBUSCFG_BARD_OFF 0x3 +#define USB_SBUSCFG_AHBBRST_OFF 0x0 + +#define USB_SBUSCFG_BAWR_ALIGN_64B 0x4 +#define USB_SBUSCFG_BARD_ALIGN_64B 0x4 +#define USB_SBUSCFG_AHBBRST_INCR16 0x7 + /* * USB 2.0 Bridge Address Decoding registers setup */ @@ -41,7 +51,7 @@ struct ehci_mvebu_priv { * to the common mvebu archticture including the mbus setup, this * will be the only function needed to configure the access windows */ -static void usb_brg_adrdec_setup(u32 base) +static void usb_brg_adrdec_setup(void *base) { const struct mbus_dram_target_info *dram; int i; @@ -66,6 +76,29 @@ static void usb_brg_adrdec_setup(u32 base) } } +static void marvell_ehci_powerup_fixup(struct ehci_ctrl *ctrl, + uint32_t *status_reg, uint32_t *reg) +{ + struct ehci_mvebu_priv *priv = ctrl->priv; + + /* + * Set default value for reg SBUSCFG, which is Control for the AMBA + * system bus interface: + * BAWR = BARD = 4 : Align rd/wr bursts packets larger than 64 bytes + * AHBBRST = 7 : Align AHB burst for packets larger than 64 bytes + */ + writel((USB_SBUSCFG_BAWR_ALIGN_64B << USB_SBUSCFG_BAWR_OFF) | + (USB_SBUSCFG_BARD_ALIGN_64B << USB_SBUSCFG_BARD_OFF) | + (USB_SBUSCFG_AHBBRST_INCR16 << USB_SBUSCFG_AHBBRST_OFF), + priv->hcd_base + USB2_SBUSCFG_OFF); + + mdelay(50); +} + +static struct ehci_ops marvell_ehci_ops = { + .powerup_fixup = NULL, +}; + static int ehci_mvebu_probe(struct udevice *dev) { struct ehci_mvebu_priv *priv = dev_get_priv(dev); @@ -81,21 +114,33 @@ static int ehci_mvebu_probe(struct udevice *dev) return -ENXIO; } - usb_brg_adrdec_setup(priv->hcd_base); + /* + * For SoCs without hlock like Armada3700 we need to program the sbuscfg + * reg to guarantee AHB master's burst will not overrun or underrun + * the FIFO. Otherwise all USB2 write option will fail. + * Also, the address decoder doesn't need to get setup with this + * SoC, so don't call usb_brg_adrdec_setup(). + */ + if (of_device_is_compatible(dev, "marvell,armada3700-ehci")) + marvell_ehci_ops.powerup_fixup = marvell_ehci_powerup_fixup; + else + usb_brg_adrdec_setup((void *)priv->hcd_base); hccr = (struct ehci_hccr *)(priv->hcd_base + 0x100); hcor = (struct ehci_hcor *) - ((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + ((uintptr_t)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - debug("ehci-marvell: init hccr %x and hcor %x hc_length %d\n", - (u32)hccr, (u32)hcor, - (u32)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + debug("ehci-marvell: init hccr %lx and hcor %lx hc_length %ld\n", + (uintptr_t)hccr, (uintptr_t)hcor, + (uintptr_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST); + return ehci_register(dev, hccr, hcor, &marvell_ehci_ops, 0, + USB_INIT_HOST); } static const struct udevice_id ehci_usb_ids[] = { { .compatible = "marvell,orion-ehci", }, + { .compatible = "marvell,armada3700-ehci", }, { } }; -- 2.25.1