From c508d22abbf0bcf2ee0fe649810ed62dcb58acaa Mon Sep 17 00:00:00 2001 From: Max Krummenacher Date: Fri, 8 Feb 2019 18:42:20 +0100 Subject: [PATCH] colibri imx6: pf0100: reorder and cleanup message printing Keep debug code at the end of the function. Use a one line informational message for the PMIC only. Signed-off-by: Max Krummenacher Acked-by: Marcel Ziswiler --- board/toradex/colibri_imx6/pf0100.c | 82 ++++++++++++++--------------- 1 file changed, 41 insertions(+), 41 deletions(-) diff --git a/board/toradex/colibri_imx6/pf0100.c b/board/toradex/colibri_imx6/pf0100.c index 5e411f1743..09c3cc950a 100644 --- a/board/toradex/colibri_imx6/pf0100.c +++ b/board/toradex/colibri_imx6/pf0100.c @@ -35,7 +35,7 @@ unsigned pmic_init(void) uchar bus = 1; uchar devid, revid, val; - puts("PMIC: "); + puts("PMIC: "); rc = i2c_get_chip_for_busnum(bus, PFUZE100_I2C_ADDR, 1, &dev); if (rc) { printf("failed to get device for PMIC at address 0x%x\n", @@ -51,7 +51,46 @@ unsigned pmic_init(void) puts("i2c pmic revid read failed\n"); return 0; } - printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid); + printf("device id: 0x%.2x, revision id: 0x%.2x, ", devid, revid); + + /* get device programmed state */ + val = PFUZE100_PAGE_REGISTER_PAGE1; + if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) { + puts("i2c write failed\n"); + return 0; + } + if (dm_i2c_read(dev, PFUZE100_FUSE_POR1, &val, 1) < 0) { + puts("i2c fuse_por read failed\n"); + return 0; + } + if (val & PFUZE100_FUSE_POR_M) + programmed++; + + if (dm_i2c_read(dev, PFUZE100_FUSE_POR2, &val, 1) < 0) { + puts("i2c fuse_por read failed\n"); + return programmed; + } + if (val & PFUZE100_FUSE_POR_M) + programmed++; + + if (dm_i2c_read(dev, PFUZE100_FUSE_POR3, &val, 1) < 0) { + puts("i2c fuse_por read failed\n"); + return programmed; + } + if (val & PFUZE100_FUSE_POR_M) + programmed++; + + switch (programmed) { + case 0: + puts("not programmed\n"); + break; + case 3: + puts("programmed\n"); + break; + default: + puts("undefined programming state\n"); + break; + } #ifdef DEBUG { @@ -103,45 +142,6 @@ unsigned pmic_init(void) } #endif /* DEBUG */ - /* get device programmed state */ - val = PFUZE100_PAGE_REGISTER_PAGE1; - if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) { - puts("i2c write failed\n"); - return 0; - } - if (dm_i2c_read(dev, PFUZE100_FUSE_POR1, &val, 1) < 0) { - puts("i2c fuse_por read failed\n"); - return 0; - } - if (val & PFUZE100_FUSE_POR_M) - programmed++; - - if (dm_i2c_read(dev, PFUZE100_FUSE_POR2, &val, 1) < 0) { - puts("i2c fuse_por read failed\n"); - return programmed; - } - if (val & PFUZE100_FUSE_POR_M) - programmed++; - - if (dm_i2c_read(dev, PFUZE100_FUSE_POR3, &val, 1) < 0) { - puts("i2c fuse_por read failed\n"); - return programmed; - } - if (val & PFUZE100_FUSE_POR_M) - programmed++; - - switch (programmed) { - case 0: - printf("PMIC: not programmed\n"); - break; - case 3: - printf("PMIC: programmed\n"); - break; - default: - printf("PMIC: undefined programming state\n"); - break; - } - return programmed; } -- 2.25.1