From c32d7fd06efff252541b179ca5155293a67888f6 Mon Sep 17 00:00:00 2001 From: Rod Whitby Date: Thu, 20 Mar 2008 11:14:32 +0000 Subject: [PATCH] ixp4xx/patches-2.6.24: Refreshed fsg patch and other affected patches SVN-Revision: 10630 --- .../030-ixp4xx_fsg_board_support.patch | 498 +++++++++--------- .../110-pronghorn_metro_support.patch | 34 +- .../patches-2.6.24/120-compex_support.patch | 38 +- .../130-wrt300nv2_support.patch | 38 +- .../patches-2.6.24/160-wg302v1_support.patch | 30 +- 5 files changed, 314 insertions(+), 324 deletions(-) diff --git a/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch b/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch index c133034e50..be72505b8f 100644 --- a/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch +++ b/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch @@ -1,7 +1,46 @@ -Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-20 21:07:50.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-20 21:09:12.000000000 +1030 +@@ -125,6 +125,15 @@ + depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 + default y + ++config MACH_FSG ++ bool ++ prompt "Freecom FSG-3" ++ select PCI ++ help ++ Say 'Y' here if you want your kernel to support Freecom's ++ FSG-3 device. For more information on this platform, ++ see http://www.nslu2-linux.org/wiki/FSG3/HomePage ++ + # + # Certain registers and IRQs are only enabled if supporting IXP465 CPUs + # +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-20 21:07:50.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-20 21:09:12.000000000 +1030 +@@ -15,6 +15,7 @@ + obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o + obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o + obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o ++obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o + + obj-y += common.o + +@@ -28,5 +29,6 @@ + obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o + obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o + obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o ++obj-$(CONFIG_MACH_FSG) += fsg-setup.o + + obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +Index: linux-2.6.24/arch/arm/mach-ixp4xx/fsg-pci.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c 2008-01-11 17:06:33.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/fsg-pci.c 2008-03-20 21:09:12.000000000 +1030 @@ -0,0 +1,71 @@ +/* + * arch/arch/mach-ixp4xx/fsg-pci.c @@ -49,21 +88,21 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c + slot = slot - 11; + + if (slot >= 1 && slot <= FSG_PCI_MAX_DEV && -+ pin >= 1 && pin <= FSG_PCI_IRQ_LINES) { -+ irq = pci_irq_table[(slot - 1)]; -+ } -+ printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq); ++ pin >= 1 && pin <= FSG_PCI_IRQ_LINES) ++ irq = pci_irq_table[(slot - 1)]; ++ printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", ++ __func__, slot, pin, irq); + -+ return irq; ++ return irq; +} + +struct hw_pci fsg_pci __initdata = { + .nr_controllers = 1, -+ .preinit = fsg_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = fsg_map_irq, ++ .preinit = fsg_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = fsg_map_irq, +}; + +int __init fsg_pci_init(void) @@ -74,35 +113,42 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c +} + +subsys_initcall(fsg_pci_init); -Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c +Index: linux-2.6.24/arch/arm/mach-ixp4xx/fsg-setup.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c 2008-01-11 17:06:33.000000000 +1030 -@@ -0,0 +1,220 @@ ++++ linux-2.6.24/arch/arm/mach-ixp4xx/fsg-setup.c 2008-03-20 21:09:12.000000000 +1030 +@@ -0,0 +1,275 @@ +/* + * arch/arm/mach-ixp4xx/fsg-setup.c + * + * FSG board-setup + * -+ * based ixdp425-setup.c: -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * Copyright (C) 2008 Rod Whitby ++ * ++ * based on ixdp425-setup.c: ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * based on nslu2-power.c ++ * Copyright (C) 2005 Tower Technologies + * + * Author: Rod Whitby + * Maintainers: http://www.nslu2-linux.org/ + * + */ + -+#include ++#include ++#include +#include +#include +#include +#include ++#include +#include + +#include +#include +#include +#include ++#include + +static struct flash_platform_data fsg_flash_data = { + .map_name = "cfi_probe", @@ -134,6 +180,12 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c + }, +}; + ++static struct i2c_board_info __initdata fsg_i2c_board_info [] = { ++ { ++ I2C_BOARD_INFO("rtc-isl1208", 0x6f), ++ }, ++}; ++ +static struct resource fsg_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, @@ -184,27 +236,27 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info fsg_plat_eth[] = { -+ { -+ .phy = 5, -+ .rxq = 3, ++ { ++ .phy = 5, ++ .rxq = 3, + .txreadyq = 20, -+ }, { -+ .phy = 4, -+ .rxq = 4, ++ }, { ++ .phy = 4, ++ .rxq = 4, + .txreadyq = 21, -+ } ++ } +}; + +static struct platform_device fsg_eth[] = { -+ { -+ .name = "ixp4xx_eth", -+ .id = IXP4XX_ETH_NPEB, -+ .dev.platform_data = fsg_plat_eth, -+ }, { -+ .name = "ixp4xx_eth", -+ .id = IXP4XX_ETH_NPEC, -+ .dev.platform_data = fsg_plat_eth + 1, -+ } ++ { ++ .name = "ixp4xx_eth", ++ .id = IXP4XX_ETH_NPEB, ++ .dev.platform_data = fsg_plat_eth, ++ }, { ++ .name = "ixp4xx_eth", ++ .id = IXP4XX_ETH_NPEC, ++ .dev.platform_data = fsg_plat_eth + 1, ++ } +}; + +static struct platform_device *fsg_devices[] __initdata = { @@ -217,29 +269,50 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c + +static void fsg_power_off(void) +{ -+ printk("Restarting system.\n"); ++ printk(KERN_INFO "Restarting system.\n"); + machine_restart(NULL); +} + ++static irqreturn_t fsg_power_handler(int irq, void *dev_id) ++{ ++ /* Signal init to do the ctrlaltdel action, this will bypass init if ++ * it hasn't started and do a kernel_restart. ++ */ ++ ctrl_alt_del(); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t fsg_reset_handler(int irq, void *dev_id) ++{ ++ /* This is the paper-clip reset, it shuts the machine down directly. ++ */ ++ machine_power_off(); ++ ++ return IRQ_HANDLED; ++} ++ +static void __init fsg_init(void) +{ ++ DECLARE_MAC_BUF(mac_buf); + uint8_t __iomem *f; + int i; + + ixp4xx_sys_init(); + -+ pm_power_off = fsg_power_off; -+ + fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + fsg_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + -+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; -+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; ++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; ++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + /* Configure CS2 for operation, 8bit and writable */ + *IXP4XX_EXP_CS2 = 0xbfff0002; + ++ i2c_register_board_info(0, fsg_i2c_board_info, ++ ARRAY_SIZE(fsg_i2c_board_info)); ++ + /* This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! @@ -248,43 +321,64 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c + + platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices)); + ++ pm_power_off = fsg_power_off; ++ ++ set_irq_type(gpio_to_irq(FSG_RB_GPIO), IRQT_LOW); ++ if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler, ++ IRQF_DISABLED, "FSG reset button", NULL) < 0) { ++ ++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", ++ gpio_to_irq(FSG_RB_GPIO)); ++ } ++ ++ set_irq_type(gpio_to_irq(FSG_SB_GPIO), IRQT_LOW); ++ if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler, ++ IRQF_DISABLED, "FSG power button", NULL) < 0) { ++ ++ printk(KERN_DEBUG "Power Button IRQ %d not available\n", ++ gpio_to_irq(FSG_SB_GPIO)); ++ } + + /* + * Map in a portion of the flash and read the MAC addresses. + * Since it is stored in BE in the flash itself, we need to + * byteswap it if we're in LE mode. + */ -+ if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000))) { ++ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000); ++ if (f) { +#ifdef __ARMEB__ + for (i = 0; i < 6; i++) { + fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i); + fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i); + } +#else -+ fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0422 + 3); -+ fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0422 + 2); -+ fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0422 + 1); -+ fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0422 + 0); -+ fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0422 + 7); -+ fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0422 + 6); -+ -+ fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0422 + 3); -+ fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C0422 + 2); -+ fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C0422 + 1); -+ fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C0422 + 0); -+ fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C0422 + 7); -+ fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0422 + 6); ++ ++ /* ++ Endian-swapped reads from unaligned addresses are ++ required to extract the two MACs from the big-endian ++ Redboot config area in flash. ++ */ ++ ++ fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421); ++ fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420); ++ fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427); ++ fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426); ++ fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425); ++ fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424); ++ ++ fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439); ++ fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F); ++ fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E); ++ fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D); ++ fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C); ++ fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443); +#endif + iounmap(f); + } -+ printk(KERN_INFO "FSG: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n", -+ fsg_plat_eth[0].hwaddr[0], fsg_plat_eth[0].hwaddr[1], -+ fsg_plat_eth[0].hwaddr[2], fsg_plat_eth[0].hwaddr[3], -+ fsg_plat_eth[0].hwaddr[4], fsg_plat_eth[0].hwaddr[5]); -+ printk(KERN_INFO "FSG: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 1\n", -+ fsg_plat_eth[1].hwaddr[0], fsg_plat_eth[1].hwaddr[1], -+ fsg_plat_eth[1].hwaddr[2], fsg_plat_eth[1].hwaddr[3], -+ fsg_plat_eth[1].hwaddr[4], fsg_plat_eth[1].hwaddr[5]); ++ printk(KERN_INFO "FSG: Using MAC address %s for port 0\n", ++ print_mac(mac_buf, fsg_plat_eth[0].hwaddr)); ++ printk(KERN_INFO "FSG: Using MAC address %s for port 1\n", ++ print_mac(mac_buf, fsg_plat_eth[1].hwaddr)); + +} + @@ -299,50 +393,10 @@ Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c + .init_machine = fsg_init, +MACHINE_END + -Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig -=================================================================== ---- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/Kconfig 2008-01-11 17:05:08.000000000 +1030 -+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig 2008-01-11 17:06:33.000000000 +1030 -@@ -125,6 +125,15 @@ - depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 - default y - -+config MACH_FSG -+ bool -+ prompt "Freecom FSG-3" -+ select PCI -+ help -+ Say 'Y' here if you want your kernel to support Freecom's -+ FSG-3 device. For more information on this platform, -+ see http://www.nslu2-linux.org/wiki/FSG3/HomePage -+ - # - # Certain registers and IRQs are only enabled if supporting IXP465 CPUs - # -Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Makefile -=================================================================== ---- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/Makefile 2008-01-11 17:05:08.000000000 +1030 -+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Makefile 2008-01-11 17:06:33.000000000 +1030 -@@ -15,6 +15,7 @@ - obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o - obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o - obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o -+obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o - - obj-y += common.o - -@@ -28,6 +29,7 @@ - obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o - obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o - obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o -+obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o - - obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o - obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o -Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h +Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/fsg.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h 2008-01-11 17:06:33.000000000 +1030 ++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/fsg.h 2008-03-20 21:09:12.000000000 +1030 @@ -0,0 +1,50 @@ +/* + * include/asm-arm/arch-ixp4xx/fsg.h @@ -394,10 +448,10 @@ Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h +#define FSG_LED_USB_BIT 4 +#define FSG_LED_RING_BIT 5 +#define FSG_LED_SYNC_BIT 7 -Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h +Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/hardware.h =================================================================== ---- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h 2008-01-11 17:05:08.000000000 +1030 -+++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h 2008-01-11 17:06:33.000000000 +1030 +--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/hardware.h 2008-03-20 21:07:50.000000000 +1030 ++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/hardware.h 2008-03-20 21:09:12.000000000 +1030 @@ -45,5 +45,6 @@ #include "nslu2.h" #include "nas100d.h" @@ -405,10 +459,10 @@ Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h +#include "fsg.h" #endif /* _ASM_ARCH_HARDWARE_H */ -Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h +Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/irqs.h =================================================================== ---- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h 2008-01-11 17:05:08.000000000 +1030 -+++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h 2008-01-11 17:06:33.000000000 +1030 +--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/irqs.h 2008-03-20 21:07:50.000000000 +1030 ++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/irqs.h 2008-03-20 21:09:12.000000000 +1030 @@ -128,4 +128,11 @@ #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 @@ -421,104 +475,10 @@ Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h +#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5 + #endif -Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c 2008-01-11 17:06:33.000000000 +1030 -@@ -0,0 +1,89 @@ -+/* -+ * arch/arm/mach-ixp4xx/fsg-power.c -+ * -+ * FSG Power/Reset driver -+ * -+ * Copyright (C) 2008 Rod Whitby -+ * -+ * based on nslu2-power.c -+ * Copyright (C) 2005 Tower Technologies -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+static irqreturn_t fsg_power_handler(int irq, void *dev_id) -+{ -+ /* Signal init to do the ctrlaltdel action, this will bypass init if -+ * it hasn't started and do a kernel_restart. -+ */ -+ ctrl_alt_del(); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t fsg_reset_handler(int irq, void *dev_id) -+{ -+ /* This is the paper-clip reset, it shuts the machine down directly. -+ */ -+ machine_power_off(); -+ -+ return IRQ_HANDLED; -+} -+ -+static int __init fsg_power_init(void) -+{ -+ if (!(machine_is_fsg())) -+ return 0; -+ -+ set_irq_type(gpio_to_irq(FSG_RB_GPIO), IRQT_LOW); -+ set_irq_type(gpio_to_irq(FSG_SB_GPIO), IRQT_LOW); -+ -+ if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler, -+ IRQF_DISABLED, "FSG reset button", NULL) < 0) { -+ -+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", -+ gpio_to_irq(FSG_RB_GPIO)); -+ -+ return -EIO; -+ } -+ -+ if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler, -+ IRQF_DISABLED, "FSG power button", NULL) < 0) { -+ -+ printk(KERN_DEBUG "Power Button IRQ %d not available\n", -+ gpio_to_irq(FSG_SB_GPIO)); -+ -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static void __exit fsg_power_exit(void) -+{ -+ if (!(machine_is_fsg())) -+ return; -+ -+ free_irq(gpio_to_irq(FSG_SB_GPIO), NULL); -+ free_irq(gpio_to_irq(FSG_RB_GPIO), NULL); -+} -+ -+module_init(fsg_power_init); -+module_exit(fsg_power_exit); -+ -+MODULE_AUTHOR("Rod Whitby "); -+MODULE_DESCRIPTION("FSG Power/Reset driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.23.12-armeb/drivers/leds/Kconfig +Index: linux-2.6.24/drivers/leds/Kconfig =================================================================== ---- linux-2.6.23.12-armeb.orig/drivers/leds/Kconfig 2008-01-11 17:05:08.000000000 +1030 -+++ linux-2.6.23.12-armeb/drivers/leds/Kconfig 2008-01-11 17:06:33.000000000 +1030 +--- linux-2.6.24.orig/drivers/leds/Kconfig 2008-03-20 21:07:50.000000000 +1030 ++++ linux-2.6.24/drivers/leds/Kconfig 2008-03-20 21:09:12.000000000 +1030 @@ -48,6 +48,12 @@ particular board must have LEDs and they must be connected to the GPIO lines. If unsure, say Y. @@ -532,23 +492,23 @@ Index: linux-2.6.23.12-armeb/drivers/leds/Kconfig config LEDS_TOSA tristate "LED Support for the Sharp SL-6000 series" depends on LEDS_CLASS && PXA_SHARPSL -Index: linux-2.6.23.12-armeb/drivers/leds/Makefile +Index: linux-2.6.24/drivers/leds/Makefile =================================================================== ---- linux-2.6.23.12-armeb.orig/drivers/leds/Makefile 2008-01-11 17:05:08.000000000 +1030 -+++ linux-2.6.23.12-armeb/drivers/leds/Makefile 2008-01-11 17:06:33.000000000 +1030 -@@ -9,6 +9,7 @@ - obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o - obj-$(CONFIG_LEDS_IXP4XX) += leds-ixp4xx-gpio.o +--- linux-2.6.24.orig/drivers/leds/Makefile 2008-03-20 21:07:50.000000000 +1030 ++++ linux-2.6.24/drivers/leds/Makefile 2008-03-20 21:09:56.000000000 +1030 +@@ -20,6 +20,7 @@ + obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o + obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o + obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o +obj-$(CONFIG_LEDS_FSG) += leds-fsg.o - obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o - obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o - obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o -Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c + + # LED Triggers + obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o +Index: linux-2.6.24/drivers/leds/leds-fsg.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c 2008-01-11 17:06:33.000000000 +1030 -@@ -0,0 +1,243 @@ ++++ linux-2.6.24/drivers/leds/leds-fsg.c 2008-03-20 21:09:12.000000000 +1030 +@@ -0,0 +1,261 @@ +/* + * LED Driver for the Freecom FSG-3 + * @@ -577,73 +537,73 @@ Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c +static unsigned short latch_value; + + -+static void fsg_led_wlan_set(struct led_classdev *led_cdev, enum led_brightness value) ++static void fsg_led_wlan_set(struct led_classdev *led_cdev, ++ enum led_brightness value) +{ + if (value) { + latch_value &= ~(1 << FSG_LED_WLAN_BIT); + *latch_address = latch_value; -+ } -+ else { ++ } else { + latch_value |= (1 << FSG_LED_WLAN_BIT); + *latch_address = latch_value; + } +} + -+static void fsg_led_wan_set(struct led_classdev *led_cdev, enum led_brightness value) ++static void fsg_led_wan_set(struct led_classdev *led_cdev, ++ enum led_brightness value) +{ + if (value) { + latch_value &= ~(1 << FSG_LED_WAN_BIT); + *latch_address = latch_value; -+ } -+ else { ++ } else { + latch_value |= (1 << FSG_LED_WAN_BIT); + *latch_address = latch_value; + } +} + -+static void fsg_led_sata_set(struct led_classdev *led_cdev, enum led_brightness value) ++static void fsg_led_sata_set(struct led_classdev *led_cdev, ++ enum led_brightness value) +{ + if (value) { + latch_value &= ~(1 << FSG_LED_SATA_BIT); + *latch_address = latch_value; -+ } -+ else { ++ } else { + latch_value |= (1 << FSG_LED_SATA_BIT); + *latch_address = latch_value; + } +} + -+static void fsg_led_usb_set(struct led_classdev *led_cdev, enum led_brightness value) ++static void fsg_led_usb_set(struct led_classdev *led_cdev, ++ enum led_brightness value) +{ + if (value) { + latch_value &= ~(1 << FSG_LED_USB_BIT); + *latch_address = latch_value; -+ } -+ else { ++ } else { + latch_value |= (1 << FSG_LED_USB_BIT); + *latch_address = latch_value; + } +} + -+static void fsg_led_sync_set(struct led_classdev *led_cdev, enum led_brightness value) ++static void fsg_led_sync_set(struct led_classdev *led_cdev, ++ enum led_brightness value) +{ + if (value) { + latch_value &= ~(1 << FSG_LED_SYNC_BIT); + *latch_address = latch_value; -+ } -+ else { ++ } else { + latch_value |= (1 << FSG_LED_SYNC_BIT); + *latch_address = latch_value; + } +} + -+static void fsg_led_ring_set(struct led_classdev *led_cdev, enum led_brightness value) ++static void fsg_led_ring_set(struct led_classdev *led_cdev, ++ enum led_brightness value) +{ + if (value) { + latch_value &= ~(1 << FSG_LED_RING_BIT); + *latch_address = latch_value; -+ } -+ else { ++ } else { + latch_value |= (1 << FSG_LED_RING_BIT); + *latch_address = latch_value; + } @@ -652,32 +612,32 @@ Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c + + +static struct led_classdev fsg_wlan_led = { -+ .name = "fsg:wlan", ++ .name = "fsg:blue:wlan", + .brightness_set = fsg_led_wlan_set, +}; + +static struct led_classdev fsg_wan_led = { -+ .name = "fsg:wan", ++ .name = "fsg:blue:wan", + .brightness_set = fsg_led_wan_set, +}; + +static struct led_classdev fsg_sata_led = { -+ .name = "fsg:sata", ++ .name = "fsg:blue:sata", + .brightness_set = fsg_led_sata_set, +}; + +static struct led_classdev fsg_usb_led = { -+ .name = "fsg:usb", ++ .name = "fsg:blue:usb", + .brightness_set = fsg_led_usb_set, +}; + +static struct led_classdev fsg_sync_led = { -+ .name = "fsg:sync", ++ .name = "fsg:blue:sync", + .brightness_set = fsg_led_sync_set, +}; + +static struct led_classdev fsg_ring_led = { -+ .name = "fsg:ring", ++ .name = "fsg:blue:ring", + .brightness_set = fsg_led_ring_set, +}; + @@ -712,37 +672,63 @@ Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c +{ + int ret; + -+ /* FIXME: Need to work out how to handle failure below */ -+ + ret = led_classdev_register(&pdev->dev, &fsg_wlan_led); + if (ret < 0) -+ return ret; ++ goto failwlan; + + ret = led_classdev_register(&pdev->dev, &fsg_wan_led); + if (ret < 0) -+ return ret; ++ goto failwan; + + ret = led_classdev_register(&pdev->dev, &fsg_sata_led); + if (ret < 0) -+ return ret; ++ goto failsata; + + ret = led_classdev_register(&pdev->dev, &fsg_usb_led); + if (ret < 0) -+ return ret; ++ goto failusb; + + ret = led_classdev_register(&pdev->dev, &fsg_sync_led); + if (ret < 0) -+ return ret; ++ goto failsync; + + ret = led_classdev_register(&pdev->dev, &fsg_ring_led); + if (ret < 0) -+ return ret; ++ goto failring; ++ ++ /* Map the LED chip select address space */ ++ latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512); ++ if (!latch_address) { ++ ret = -ENOMEM; ++ goto failremap; ++ } ++ ++ latch_value = 0xffff; ++ *latch_address = latch_value; ++ ++ return ret; ++ ++ failremap: ++ led_classdev_unregister(&fsg_ring_led); ++ failring: ++ led_classdev_unregister(&fsg_sync_led); ++ failsync: ++ led_classdev_unregister(&fsg_usb_led); ++ failusb: ++ led_classdev_unregister(&fsg_sata_led); ++ failsata: ++ led_classdev_unregister(&fsg_wan_led); ++ failwan: ++ led_classdev_unregister(&fsg_wlan_led); ++ failwlan: + + return ret; +} + +static int fsg_led_remove(struct platform_device *pdev) +{ ++ iounmap(latch_address); ++ + led_classdev_unregister(&fsg_wlan_led); + led_classdev_unregister(&fsg_wan_led); + led_classdev_unregister(&fsg_sata_led); @@ -769,20 +755,12 @@ Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c + +static int __init fsg_led_init(void) +{ -+ /* Map the LED chip select address space */ -+ latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512); -+ if (!latch_address) -+ return -ENOMEM; -+ latch_value = 0xffff; -+ *latch_address = latch_value; -+ /* FIXME: We leak memory if the next line fails */ + return platform_driver_register(&fsg_led_driver); +} + +static void __exit fsg_led_exit(void) +{ -+ platform_driver_unregister(&fsg_led_driver); -+ iounmap(latch_address); ++ platform_driver_unregister(&fsg_led_driver); +} + + diff --git a/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch b/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch index 80115b8401..fb895e0234 100644 --- a/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch +++ b/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch @@ -1,7 +1,7 @@ -Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig =================================================================== ---- linux-2.6.23.12.orig/arch/arm/mach-ixp4xx/Kconfig 2008-01-05 13:30:14.000000000 +1030 -+++ linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig 2008-01-05 13:37:05.000000000 +1030 +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:23.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030 @@ -57,6 +57,14 @@ WG302 v2 or WAG302 v2 Access Points. For more information on this platform, see http://openwrt.org @@ -17,10 +17,10 @@ Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig config ARCH_IXDP425 bool "IXDP425" help -Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile =================================================================== ---- linux-2.6.23.12.orig/arch/arm/mach-ixp4xx/Makefile 2008-01-05 13:32:45.000000000 +1030 -+++ linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile 2008-01-05 13:37:37.000000000 +1030 +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:23.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030 @@ -16,6 +16,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o @@ -32,14 +32,14 @@ Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile @@ -30,5 +31,6 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o - obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o + obj-$(CONFIG_MACH_FSG) += fsg-setup.o +obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-pci.c +Index: linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-pci.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 2008-01-05 13:37:05.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 2008-03-12 21:21:26.000000000 +1030 @@ -0,0 +1,74 @@ +/* + * arch/arch/mach-ixp4xx/pronghornmetro-pci.c @@ -115,10 +115,10 @@ Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-pci.c +} + +subsys_initcall(pronghornmetro_pci_init); -Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-setup.c +Index: linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-setup.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2008-01-05 13:37:05.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2008-03-12 21:21:26.000000000 +1030 @@ -0,0 +1,147 @@ +/* + * arch/arm/mach-ixp4xx/pronghornmetro-setup.c @@ -267,10 +267,10 @@ Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-setup.c + .init_machine = pronghornmetro_init, +MACHINE_END +#endif -Index: linux-2.6.23.12/Documentation/arm/IXP4xx +Index: linux-2.6.24/Documentation/arm/IXP4xx =================================================================== ---- linux-2.6.23.12.orig/Documentation/arm/IXP4xx 2008-01-05 13:30:14.000000000 +1030 -+++ linux-2.6.23.12/Documentation/arm/IXP4xx 2008-01-05 13:37:05.000000000 +1030 +--- linux-2.6.24.orig/Documentation/arm/IXP4xx 2008-03-12 21:20:48.000000000 +1030 ++++ linux-2.6.24/Documentation/arm/IXP4xx 2008-03-12 21:21:26.000000000 +1030 @@ -111,6 +111,9 @@ the platform has two mini-PCI slots used for 802.11[bga] cards. Finally, there is an IDE port hanging off the expansion bus. @@ -281,10 +281,10 @@ Index: linux-2.6.23.12/Documentation/arm/IXP4xx Gateworks Avila Network Platform http://www.gateworks.com/avila_sbc.htm -Index: linux-2.6.23.12/include/asm-arm/arch-ixp4xx/uncompress.h +Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h =================================================================== ---- linux-2.6.23.12.orig/include/asm-arm/arch-ixp4xx/uncompress.h 2008-01-05 13:30:14.000000000 +1030 -+++ linux-2.6.23.12/include/asm-arm/arch-ixp4xx/uncompress.h 2008-01-05 13:37:05.000000000 +1030 +--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:20:48.000000000 +1030 ++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:21:26.000000000 +1030 @@ -41,7 +41,8 @@ * Some boards are using UART2 as console */ diff --git a/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch index 2488cb49d8..c029ceda1b 100644 --- a/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch +++ b/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch @@ -1,6 +1,7 @@ -diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 18:03:34.000000000 +0200 -+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 18:22:41.000000000 +0200 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030 @@ -65,6 +65,14 @@ Engineering Pronghorn Metro Platform. For more information on this platform, see . @@ -16,9 +17,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/m config ARCH_IXDP425 bool "IXDP425" help -diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile 2007-10-23 18:03:34.000000000 +0200 -+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile 2007-10-23 18:22:41.000000000 +0200 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030 @@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o @@ -27,17 +29,17 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/ obj-y += common.o -@@ -32,6 +33,7 @@ +@@ -32,5 +33,6 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o +obj-$(CONFIG_MACH_COMPEX) += compex-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o - obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o -diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c ---- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-10-23 18:22:41.000000000 +0200 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/compex-setup.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/compex-setup.c 2008-03-12 21:21:26.000000000 +1030 @@ -0,0 +1,120 @@ +/* + * arch/arm/mach-ixp4xx/compex-setup.c @@ -159,9 +161,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arc + .init_machine = compex_init, +MACHINE_END +#endif -diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c ---- linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-10-23 18:22:41.000000000 +0200 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/ixdp425-pci.c +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c 2008-03-12 21:20:48.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/ixdp425-pci.c 2008-03-12 21:21:26.000000000 +1030 @@ -66,7 +66,7 @@ int __init ixdp425_pci_init(void) { @@ -171,9 +174,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23-owrt/arch pci_common_init(&ixdp425_pci); return 0; } -diff -Nur linux-2.6.23/arch/arm/tools/mach-types linux-2.6.23-owrt/arch/arm/tools/mach-types ---- linux-2.6.23/arch/arm/tools/mach-types 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6.23-owrt/arch/arm/tools/mach-types 2007-10-23 18:22:41.000000000 +0200 +Index: linux-2.6.24/arch/arm/tools/mach-types +=================================================================== +--- linux-2.6.24.orig/arch/arm/tools/mach-types 2008-03-12 21:20:48.000000000 +1030 ++++ linux-2.6.24/arch/arm/tools/mach-types 2008-03-12 21:21:26.000000000 +1030 @@ -1278,7 +1278,7 @@ smdk6400 MACH_SMDK6400 SMDK6400 1270 nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271 diff --git a/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch index 78e525d309..30a7c55ae0 100644 --- a/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch +++ b/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch @@ -1,6 +1,7 @@ -diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 18:39:29.000000000 +0200 -+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 19:11:31.000000000 +0200 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:27.000000000 +1030 @@ -73,6 +73,14 @@ WP18 or NP18A boards. For more information on this platform, see http://openwrt.org @@ -16,9 +17,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/m config ARCH_IXDP425 bool "IXDP425" help -diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile 2007-10-23 18:39:29.000000000 +0200 -+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile 2007-10-23 19:11:31.000000000 +0200 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:27.000000000 +1030 @@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o @@ -27,17 +29,17 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/ obj-y += common.o -@@ -34,6 +35,7 @@ +@@ -34,5 +35,6 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o obj-$(CONFIG_MACH_COMPEX) += compex-setup.o +obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o - obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o -diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c ---- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 2007-10-23 19:11:31.000000000 +0200 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-pci.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 2008-03-12 21:21:27.000000000 +1030 @@ -0,0 +1,65 @@ +/* + * arch/arch/mach-ixp4xx/wrt300nv2-pci.c @@ -104,9 +106,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.23-owrt/ar +} + +subsys_initcall(wrt300nv2_pci_init); -diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c ---- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-10-23 19:11:31.000000000 +0200 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-setup.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2008-03-12 21:21:27.000000000 +1030 @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-ixp4xx/wrt300nv2-setup.c @@ -216,9 +219,10 @@ diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/ + .init_machine = wrt300nv2_init, +MACHINE_END +#endif -diff -Nur linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h ---- linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h 2007-10-23 18:03:35.000000000 +0200 -+++ linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-10-23 19:12:30.000000000 +0200 +Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h +=================================================================== +--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:21:26.000000000 +1030 ++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:21:27.000000000 +1030 @@ -42,7 +42,7 @@ */ if (machine_is_adi_coyote() || machine_is_gtwx5715() || diff --git a/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch index 129e5ca8e1..379b5aa578 100644 --- a/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch +++ b/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch @@ -1,6 +1,7 @@ -diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig 2008-01-14 22:08:42.000000000 +0100 -+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Kconfig 2008-01-14 22:12:21.000000000 +0100 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:28.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:29.000000000 +1030 @@ -49,6 +49,14 @@ 7001 Access Point. For more information on this platform, see http://openwrt.org @@ -16,9 +17,10 @@ diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.12-owrt/arch config MACH_WG302V2 bool "Netgear WG302 v2 / WAG302 v2" select PCI -diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile 2008-01-14 22:08:42.000000000 +0100 -+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Makefile 2008-01-14 22:11:47.000000000 +0100 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:28.000000000 +1030 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:29.000000000 +1030 @@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o @@ -33,11 +35,12 @@ diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.12-owrt/arc obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o +obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o - obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o + obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o -diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-pci.c ---- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-pci.c 2008-01-14 22:33:52.000000000 +0100 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-pci.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-pci.c 2008-03-12 21:21:29.000000000 +1030 @@ -0,0 +1,63 @@ +/* + * arch/arch/mach-ixp4xx/wg302v1-pci.c @@ -102,9 +105,10 @@ diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c linux-2.6.23.12-owr +} + +subsys_initcall(wg302v1_pci_init); -diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c ---- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:04:01.000000000 +0100 +Index: linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-setup.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-03-12 21:21:29.000000000 +1030 @@ -0,0 +1,109 @@ +/* + * arch/arm/mach-ixp4xx/wg302v1-setup.c -- 2.25.1