From c2d5b341206f44c13f4de3c4bb80916d085dfdea Mon Sep 17 00:00:00 2001 From: Steve Sakoman Date: Thu, 12 Aug 2010 15:13:02 -0700 Subject: [PATCH] ARMV7: OMAP: Add board revision detection for Overo The latest Overo COM modules encode their revision number on GPIOs 115, 113, and 112. All boards to date have no pullups on these pins and hence appear as revision 0. This patch reads and prints the revision information. Signed-off-by: Steve Sakoman Signed-off-by: Sandeep Paulraj --- board/overo/overo.c | 32 ++++++++++++++++++++++++++++++++ board/overo/overo.h | 6 +++--- 2 files changed, 35 insertions(+), 3 deletions(-) diff --git a/board/overo/overo.c b/board/overo/overo.c index e85be7d5e6..1c7087b7ed 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -60,6 +60,37 @@ int board_init(void) return 0; } +/* + * Routine: get_board_revision + * Description: Returns the board revision + */ +int get_board_revision(void) +{ + int revision; + + if (!omap_request_gpio(112) && + !omap_request_gpio(113) && + !omap_request_gpio(115)) { + + omap_set_gpio_direction(112, 1); + omap_set_gpio_direction(113, 1); + omap_set_gpio_direction(115, 1); + + revision = omap_get_gpio_datain(115) << 2 | + omap_get_gpio_datain(113) << 1 | + omap_get_gpio_datain(112); + + omap_free_gpio(112); + omap_free_gpio(113); + omap_free_gpio(115); + } else { + printf("Error: unable to acquire board revision GPIOs\n"); + revision = -1; + } + + return revision; +} + /* * Routine: misc_init_r * Description: Configure board specific parts @@ -73,6 +104,7 @@ int misc_init_r(void) setup_net_chip(); #endif + printf("Board revision: %d\n", get_board_revision()); dieid_num_r(); return 0; diff --git a/board/overo/overo.h b/board/overo/overo.h index fff43dac9c..a4e49b91a0 100644 --- a/board/overo/overo.h +++ b/board/overo/overo.h @@ -189,11 +189,11 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0)) /*CAM_WEN*/\ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) /*GPIO_112*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) /*GPIO_113*/\ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\ /* - PEN_DOWN*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTU | EN | M4)) /*GPIO_115*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) /*GPIO_115*/\ /*Audio Interface */\ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ -- 2.25.1