From c1f8750f9f15a81e40566f2be6fe359649e91a00 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 5 Sep 2011 14:37:30 +0200 Subject: [PATCH] ARM: remove broken "impa7" board. MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: Wolfgang Denk Cc: Albert ARIBAUD Cc: Marius Gröger --- MAINTAINERS | 4 - MAKEALL | 1 - arch/arm/cpu/arm720t/cpu.c | 29 +- arch/arm/cpu/arm720t/interrupts.c | 14 +- arch/arm/cpu/arm720t/start.S | 64 +--- arch/arm/include/asm/arch-arm720t/hardware.h | 2 - board/impa7/Makefile | 51 --- board/impa7/config.mk | 28 -- board/impa7/flash.c | 359 ------------------- board/impa7/impa7.c | 71 ---- board/impa7/lowlevel_init.S | 85 ----- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/impa7.h | 174 --------- 14 files changed, 6 insertions(+), 878 deletions(-) delete mode 100644 board/impa7/Makefile delete mode 100644 board/impa7/config.mk delete mode 100644 board/impa7/flash.c delete mode 100644 board/impa7/impa7.c delete mode 100644 board/impa7/lowlevel_init.S delete mode 100644 include/configs/impa7.h diff --git a/MAINTAINERS b/MAINTAINERS index b001f64101..ca31239d6e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -657,10 +657,6 @@ Simon Guinot netspace_v2 ARM926EJS (Kirkwood SoC) netspace_max_v2 ARM926EJS (Kirkwood SoC) -Marius Gröger - - impa7 ARM720T (EP7211) - Igor Grinberg cm-t35 ARM ARMV7 (OMAP3xx Soc) diff --git a/MAKEALL b/MAKEALL index 2876a268dd..350a524c4b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -301,7 +301,6 @@ LIST_SA="$(boards_by_cpu sa1100)" ######################################################################### LIST_ARM7=" \ - impa7 \ lpc2292sodimm \ modnet50 \ " diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c index 71d8d6b5c1..974f2880a4 100644 --- a/arch/arm/cpu/arm720t/cpu.c +++ b/arch/arm/cpu/arm720t/cpu.c @@ -36,10 +36,6 @@ #include #include -#if defined(CONFIG_IMPA7) -static void cache_flush(void); -#endif - int cleanup_before_linux (void) { /* @@ -50,20 +46,7 @@ int cleanup_before_linux (void) * and we set the CPU-speed to 73 MHz - see start.S for details */ -#if defined(CONFIG_IMPA7) - disable_interrupts (); - - /* turn off I-cache */ - icache_disable(); - dcache_disable(); - - /* flush I-cache */ - cache_flush(); -#ifdef CONFIG_ARM7_REVD - /* go to high speed */ - IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73; -#endif -#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292) +#if defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292) disable_interrupts (); /* Nothing more needed */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) @@ -73,13 +56,3 @@ int cleanup_before_linux (void) #endif return 0; } - -#if defined(CONFIG_IMPA7) -/* flush I/D-cache */ -static void cache_flush (void) -{ - unsigned long i = 0; - - asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i)); -} -#endif diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index 3cebf1147c..464dd30466 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -149,18 +149,6 @@ int timer_init (void) /* set timer 2 counter */ lastdec = TIMER_LOAD_VAL; -#elif defined(CONFIG_IMPA7) - /* disable all interrupts */ - IO_INTMR1 = 0; - - /* operate timer 1 in prescale mode */ - IO_SYSCON1 |= SYSCON1_TC1M; - - /* select 2kHz clock source for timer 1 */ - IO_SYSCON1 &= ~SYSCON1_TC1S; - - /* set timer 1 counter */ - lastdec = IO_TC1D = TIMER_LOAD_VAL; #elif defined(CONFIG_S3C4510B) /* configure free running timer 0 */ PUT_REG( REG_TMOD, 0x0); @@ -207,7 +195,7 @@ int timer_init (void) */ -#if defined(CONFIG_IMPA7) || defined(CONFIG_NETARM) || defined(CONFIG_LPC2292) +#if defined(CONFIG_NETARM) || defined(CONFIG_LPC2292) ulong get_timer (ulong base) { diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index f2320ee57c..00fa8c95ea 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -272,25 +272,7 @@ _dynsym_start_ofs: ************************************************************************* */ -#if defined(CONFIG_IMPA7) - -/* Interrupt-Controller base addresses */ -INTMR1: .word 0x80000280 @ 32 bit size -INTMR2: .word 0x80001280 @ 16 bit size -INTMR3: .word 0x80002280 @ 8 bit size - -/* SYSCONs */ -SYSCON1: .word 0x80000100 -SYSCON2: .word 0x80001100 -SYSCON3: .word 0x80002200 - -#define CLKCTL 0x6 /* mask */ -#define CLKCTL_18 0x0 /* 18.432 MHz */ -#define CLKCTL_36 0x2 /* 36.864 MHz */ -#define CLKCTL_49 0x4 /* 49.152 MHz */ -#define CLKCTL_73 0x6 /* 73.728 MHz */ - -#elif defined(CONFIG_LPC2292) +#if defined(CONFIG_LPC2292) PLLCFG_ADR: .word PLLCFG PLLFEED_ADR: .word PLLFEED PLLCON_ADR: .word PLLCON @@ -301,35 +283,7 @@ MEMMAP_ADR: .word MEMMAP #endif cpu_init_crit: -#if defined(CONFIG_IMPA7) - - /* - * mask all IRQs by clearing all bits in the INTMRs - */ - mov r1, #0x00 - ldr r0, INTMR1 - str r1, [r0] - ldr r0, INTMR2 - str r1, [r0] - ldr r0, INTMR3 - str r1, [r0] - - /* - * flush v4 I/D caches - */ - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - mrc p15,0,r0,c1,c0 - bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) - bic r0, r0, #0x0000008f @ clear bits 7, 3:0 (B--- WCAM) - orr r0, r0, #0x00000002 @ set bit 2 (A) Align - mcr p15,0,r0,c1,c0 -#elif defined(CONFIG_NETARM) +#if defined(CONFIG_NETARM) /* * prior to software reset : need to set pin PORTC4 to be *HRESET */ @@ -634,19 +588,7 @@ fiq: #endif -#if defined(CONFIG_IMPA7) - .align 5 -.globl reset_cpu -reset_cpu: - mov ip, #0 - mcr p15, 0, ip, c7, c7, 0 @ invalidate cache - mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4) - mrc p15, 0, ip, c1, c0, 0 @ get ctrl register - bic ip, ip, #0x000f @ ............wcam - bic ip, ip, #0x2100 @ ..v....s........ - mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 -#elif defined(CONFIG_NETARM) +#if defined(CONFIG_NETARM) .align 5 .globl reset_cpu reset_cpu: diff --git a/arch/arm/include/asm/arch-arm720t/hardware.h b/arch/arm/include/asm/arch-arm720t/hardware.h index d89effa505..0a357b1e0a 100644 --- a/arch/arm/include/asm/arch-arm720t/hardware.h +++ b/arch/arm/include/asm/arch-arm720t/hardware.h @@ -26,8 +26,6 @@ #if defined(CONFIG_NETARM) #include -#elif defined(CONFIG_IMPA7) -/* include IMPA7 specific hardware file if there was one */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* include IntegratorCP/CM720T specific hardware file if there was one */ #else diff --git a/board/impa7/Makefile b/board/impa7/Makefile deleted file mode 100644 index 79b12a220c..0000000000 --- a/board/impa7/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := impa7.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/impa7/config.mk b/board/impa7/config.mk deleted file mode 100644 index 15e7f04caf..0000000000 --- a/board/impa7/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2000 -# Sysgo Real-Time Solutions, GmbH -# Marius Groeger -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -CONFIG_SYS_TEXT_BASE = 0xc1780000 diff --git a/board/impa7/flash.c b/board/impa7/flash.c deleted file mode 100644 index 6eae428a9d..0000000000 --- a/board/impa7/flash.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#define FLASH_BANK_SIZE 0x800000 -#define MAIN_SECT_SIZE 0x20000 -#define PARAM_SECT_SIZE 0x4000 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -/*----------------------------------------------------------------------- - */ - -ulong flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = - (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F320B3T & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else if (i == 1) - flashbase = PHYS_FLASH_2; - else - panic ("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j <= 7) { - flash_info[i].start[j] = - flashbase + j * PARAM_SECT_SIZE; - } else { - flash_info[i].start[j] = - flashbase + (j - 7) * MAIN_SECT_SIZE; - } - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf ("Intel: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (INTEL_ID_28F320B3T & FLASH_TYPEMASK): - printf ("28F320F3B (16Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - - Done:; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - int rc = ERR_OK; - ulong start; - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (INTEL_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *) (info->start[sect]); - - *addr = 0x00200020; /* erase setup */ - *addr = 0x00D000D0; /* erase confirm */ - - while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = 0x00B000B0; /* suspend erase */ - *addr = 0x00FF00FF; /* reset to read mode */ - rc = ERR_TIMOUT; - goto outahere; - } - } - - *addr = 0x00FF00FF; /* reset to read mode */ - } - printf ("ok.\n"); - } - if (ctrlc ()) - printf ("User Interrupt!\n"); - - outahere: - - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (flag) - enable_interrupts (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *) dest; - ulong barf; - int rc = ERR_OK; - int flag; - ulong start; - - /* Check if Flash is (sufficiently) erased - */ - if ((*addr & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - - /* clear status register command */ - *addr = 0x00500050; - - /* program set-up command */ - *addr = 0x00400040; - - /* latch address/data */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* read status register command */ - *addr = 0x00700070; - - /* wait while polling the status register */ - while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = ERR_TIMOUT; - /* suspend program command */ - *addr = 0x00B000B0; - goto outahere; - } - - if (*addr & 0x003A003A) { /* check for error */ - barf = *addr; - if (barf & 0x003A0000) { - barf >>= 16; - } else { - barf &= 0x0000003A; - } - printf ("\nFlash write error %02lx at address %08lx\n", barf, (unsigned long) dest); - if (barf & 0x0002) { - printf ("Block locked, not erased.\n"); - rc = ERR_NOT_ERASED; - goto outahere; - } - if (barf & 0x0010) { - printf ("Programming error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - if (barf & 0x0008) { - printf ("Vpp Low error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - rc = ERR_PROG_ERROR; - goto outahere; - } - } - - - outahere: - /* read array command */ - *addr = 0x00FF00FF; - - if (flag) - enable_interrupts (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int l; - int i, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 24); - } - for (; i < 4 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 24); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 24); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = *((vu_long *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 4; - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 24); - --cnt; - } - for (; i < 4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 24); - } - - return write_word (info, wp, data); -} diff --git a/board/impa7/impa7.c b/board/impa7/impa7.c deleted file mode 100644 index 205b1b31dd..0000000000 --- a/board/impa7/impa7.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* Activate LED flasher */ - IO_LEDFLSH = 0x40; - - /* arch number of EP7111 */ - gd->bd->bi_arch_number = MACH_TYPE_EDB7211; - - /* location of boot parameters for EP7111 */ - gd->bd->bi_boot_params = 0xc0020100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - - return (0); -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/board/impa7/lowlevel_init.S b/board/impa7/lowlevel_init.S deleted file mode 100644 index 7ce10a2019..0000000000 --- a/board/impa7/lowlevel_init.S +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Memory Setup stuff - taken from ??? - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include -#include - - -/* some parameters for the board */ - -SYSCON2: .long 0x80001100 -MEMCFG1: .long 0x80000180 -MEMCFG2: .long 0x800001C0 -DRFPR: .long 0x80000200 - -syscon2_mask: .long 0x00000004 -memcfg1_val: .long 0x160c1414 -memcfg2_mask: .long 0x0000ffff @ only set lower 16 bits -memcfg2_val: .long 0x00000000 @ upper 16 bits are reserved for CS7 + CS6 -drfpr_val: .long 0x00000081 -/* setting up the memory */ - -.globl lowlevel_init -lowlevel_init: - /* - * DRFPR - * 64kHz DRAM refresh - */ - ldr r0, DRFPR - ldr r1, drfpr_val - str r1, [r0] - - /* - * SYSCON2: clear bit 2, DRAM is 32 bits wide - */ - ldr r0, SYSCON2 - ldr r2, [r0] - ldr r1, syscon2_mask - bic r2, r2, r1 - str r2, [r0] - - /* - * MEMCFG1 - * Setting up Keyboard at CS3, 8 Bit, 3 Waitstates - * Setting up CS8900 (Ethernet) at CS2, 32 Bit, 5 Waitstates - * Setting up flash at CS0 and CS1, 32 Bit, 3 Waitstates - */ - ldr r0, MEMCFG1 - ldr r1, memcfg1_val - str r1, [r0] - - /* - * MEMCFG2 - * Setting up ? with 0 - * - */ - ldr r0, MEMCFG2 - ldr r2, [r0] - ldr r1, memcfg2_mask - bic r2, r2, r1 - ldr r1, memcfg2_val - orr r2, r2, r1 - str r2, [r0] - - /* everything is fine now */ - mov pc, lr diff --git a/boards.cfg b/boards.cfg index 6e2c5e139d..299bed8c1e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -42,7 +42,6 @@ imx31_litekit arm arm1136 - logicpd mx35pdk arm arm1136 - freescale mx35 omap2420h4 arm arm1136 - ti omap24xx tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x -impa7 arm arm720t modnet50 arm arm720t integratorap_cm720t arm arm720t integrator armltd - integratorap lpc2292sodimm arm arm720t - - lpc2292 diff --git a/doc/README.scrapyard b/doc/README.scrapyard index d13709086b..63464416e3 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +impa7 arm arm720t - 2011-09-05 Marius Gröger gcplus arm sa1100 - 2011-09-05 George G. Davis evb4510 arm arm720t - 2011-09-05 Curt Brune ep7312 arm arm720t - 2011-09-05 Marius Gröger diff --git a/include/configs/impa7.h b/include/configs/impa7.h deleted file mode 100644 index 3328e639a9..0000000000 --- a/include/configs/impa7.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * (C) Copyright 2000 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * Configuation settings for the implementa impA7 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ -#define CONFIG_IMPA7 1 /* on an impA7 Board */ -#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ -#define CONFIG_ARM7_REVD 1 /* enable ARM720 REV.D Workarounds */ - -#undef CONFIG_USE_IRQ /* don't need them anymore */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NET_MULTI -#define CONFIG_CS8900 /* we have a CS8900 on-board */ -#define CONFIG_CS8900_BASE 0x20000000 -#define CONFIG_CS8900_BUS32 - -/* - * select serial console configuration - */ -#define CONFIG_CLPS7111_SERIAL -#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 9600 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_JFFS2 - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600" -/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5a */ -/*#define CONFIG_NETMASK 255.255.0.0 */ -/*#define CONFIG_IPADDR 172.22.2.128 */ -/*#define CONFIG_SERVERIP 172.22.2.126 */ -/*#define CONFIG_BOOTFILE "impa7" */ -#define CONFIG_BOOTCOMMAND "bootp;bootm" - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "impA7 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* default load address */ - -#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */ -#define PHYS_SDRAM_2 0xc1000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x10000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x00800000 /* 16 MB */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00020000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=impA7 NOR Flash Bank #0,nor1=impA7 NOR Flash Bank #1" -#define MTDPARTS_DEFAULT "mtdparts=impA7 NOR Flash Bank #0:-(FileSystem1);impA7 NOR Flash Bank #1:-(FileSystem2)" -*/ - -#endif /* __CONFIG_H */ -- 2.25.1