From c0def248caa5e2e6ed63249d3713830bd27e31e6 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Thu, 22 Sep 2016 12:56:14 +1200 Subject: [PATCH] arm: mvebu: add DB-88F6820-AMC board This board is a plug in card for Marvell's switch system development kits. Form-factor aside it is similar to the DB-88F6820-GP with the following differences. - TCLK is 200MHz - SPI1 is used - No SATA - No MMC - NAND flash Reviewed-by: Simon Glass Signed-off-by: Chris Packham Signed-off-by: Stefan Roese --- arch/arm/dts/Makefile | 1 + arch/arm/dts/armada-385-amc.dts | 155 ++++++++++++++++++ arch/arm/mach-mvebu/Kconfig | 7 + board/Marvell/db-88f6820-amc/MAINTAINERS | 6 + board/Marvell/db-88f6820-amc/Makefile | 7 + board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 129 +++++++++++++++ board/Marvell/db-88f6820-amc/kwbimage.cfg | 12 ++ configs/db-88f6820-amc_defconfig | 43 +++++ include/configs/db-88f6820-amc.h | 123 ++++++++++++++ 9 files changed, 483 insertions(+) create mode 100644 arch/arm/dts/armada-385-amc.dts create mode 100644 board/Marvell/db-88f6820-amc/MAINTAINERS create mode 100644 board/Marvell/db-88f6820-amc/Makefile create mode 100644 board/Marvell/db-88f6820-amc/db-88f6820-amc.c create mode 100644 board/Marvell/db-88f6820-amc/kwbimage.cfg create mode 100644 configs/db-88f6820-amc_defconfig create mode 100644 include/configs/db-88f6820-amc.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 1d41d48555..df57288076 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-375-db.dtb \ armada-388-clearfog.dtb \ armada-388-gp.dtb \ + armada-385-amc.dtb \ armada-xp-gp.dtb \ armada-xp-maxbcm.dtb \ armada-xp-synology-ds414.dtb \ diff --git a/arch/arm/dts/armada-385-amc.dts b/arch/arm/dts/armada-385-amc.dts new file mode 100644 index 0000000000..858138a337 --- /dev/null +++ b/arch/arm/dts/armada-385-amc.dts @@ -0,0 +1,155 @@ +/* + * Device Tree file for Marvell Armada 385 development board + * (DB-88F6820-AMC) + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385.dtsi" +#include + +/ { + model = "Marvell Armada 385 AMC"; + compatible = "marvell,a385-amc", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + spi1 = &spi1; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = ; + + internal-regs { + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + }; + + serial@12000 { + /* + * Exported on the micro USB connector CON16 + * through an FTDI + */ + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + u-boot,dm-pre-reloc; + }; + + ethernet@34000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; + }; + + usb@58000 { + status = "okay"; + }; + + ethernet@70000 { + pinctrl-names = "default"; + /* + * The Reference Clock 0 is used to provide a + * clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + + pcie-controller { + status = "okay"; + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + }; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + u-boot,dm-pre-reloc; + + spi-flash@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; +}; + +&refclk { + clock-frequency = <20000000>; +}; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 8ce0c9ee45..0fd71a717a 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -41,6 +41,10 @@ config TARGET_DB_88F6820_GP bool "Support DB-88F6820-GP" select 88F6820 +config TARGET_DB_88F6820_AMC + bool "Support DB-88F6820-AMC" + select 88F6820 + config TARGET_DB_MV784MP_GP bool "Support db-mv784mp-gp" select MV78460 @@ -63,6 +67,7 @@ config SYS_BOARD default "clearfog" if TARGET_CLEARFOG default "db-88f6720" if TARGET_DB_88F6720 default "db-88f6820-gp" if TARGET_DB_88F6820_GP + default "db-88f6820-amc" if TARGET_DB_88F6820_AMC default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM @@ -72,6 +77,7 @@ config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG default "db-88f6720" if TARGET_DB_88F6720 default "db-88f6820-gp" if TARGET_DB_88F6820_GP + default "db-88f6820-amc" if TARGET_DB_88F6820_AMC default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM @@ -81,6 +87,7 @@ config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP default "Marvell" if TARGET_DB_88F6720 default "Marvell" if TARGET_DB_88F6820_GP + default "Marvell" if TARGET_DB_88F6820_AMC default "solidrun" if TARGET_CLEARFOG default "Synology" if TARGET_DS414 diff --git a/board/Marvell/db-88f6820-amc/MAINTAINERS b/board/Marvell/db-88f6820-amc/MAINTAINERS new file mode 100644 index 0000000000..abf5b7efdc --- /dev/null +++ b/board/Marvell/db-88f6820-amc/MAINTAINERS @@ -0,0 +1,6 @@ +DB_88F6820_AMC BOARD +M: Chris Packham +S: Maintained +F: board/Marvell/db-88f6820-amc/ +F: include/configs/db-88f6820-amc.h +F: configs/db-88f6820-amc_defconfig diff --git a/board/Marvell/db-88f6820-amc/Makefile b/board/Marvell/db-88f6820-amc/Makefile new file mode 100644 index 0000000000..79e1a75f4c --- /dev/null +++ b/board/Marvell/db-88f6820-amc/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2015 Stefan Roese +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := db-88f6820-amc.o diff --git a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c new file mode 100644 index 0000000000..cade99c8d7 --- /dev/null +++ b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2015 Stefan Roese + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "../drivers/ddr/marvell/a38x/ddr3_a38x_topology.h" +#include <../serdes/a38x/high_speed_env_spec.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define ETH_PHY_CTRL_REG 0 +#define ETH_PHY_CTRL_POWER_DOWN_BIT 11 +#define ETH_PHY_CTRL_POWER_DOWN_MASK (1 << ETH_PHY_CTRL_POWER_DOWN_BIT) + +/* + * Those values and defines are taken from the Marvell U-Boot version + * "u-boot-2013.01-2016_T1.0.eng_drop_v10" + */ +#define DB_AMC_88F68XX_GPP_OUT_ENA_LOW \ + (~(BIT(29))) +#define DB_AMC_88F68XX_GPP_OUT_ENA_MID \ + (~(BIT(12) | BIT(17) | BIT(18) | BIT(20) | BIT(21))) +#define DB_AMC_88F68XX_GPP_OUT_VAL_LOW (BIT(29)) +#define DB_AMC_88F68XX_GPP_OUT_VAL_MID 0x0 +#define DB_AMC_88F68XX_GPP_OUT_VAL_HIGH 0x0 +#define DB_AMC_88F68XX_GPP_POL_LOW 0x0 +#define DB_AMC_88F68XX_GPP_POL_MID 0x0 + +static struct serdes_map board_serdes_map[] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII1, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count) +{ + *serdes_map_array = board_serdes_map; + *count = ARRAY_SIZE(board_serdes_map); + return 0; +} + +/* + * Define the DDR layout / topology here in the board file. This will + * be used by the DDR3 init code in the SPL U-Boot version to configure + * the DDR3 controller. + */ +static struct hws_topology_map board_topology_map = { + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X PUPs */ + { { { {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0}, + {0x1, 0, 0, 0} }, + SPEED_BIN_DDR_1866L, /* speed_bin */ + BUS_WIDTH_8, /* memory_width */ + MEM_4G, /* mem_size */ + DDR_FREQ_800, /* frequency */ + 0, 0, /* cas_l cas_wl */ + HWS_TEMP_LOW} }, /* temperature */ + 5, /* Num Of Bus Per Interface*/ + BUS_MASK_32BIT /* Busses mask */ +}; + +struct hws_topology_map *ddr3_get_topology_map(void) +{ + /* Return the board topology as defined in the board code */ + return &board_topology_map; +} + +int board_early_init_f(void) +{ + /* Configure MPP */ + writel(0x11111111, MVEBU_MPP_BASE + 0x00); + writel(0x11111111, MVEBU_MPP_BASE + 0x04); + writel(0x55066011, MVEBU_MPP_BASE + 0x08); + writel(0x05055550, MVEBU_MPP_BASE + 0x0c); + writel(0x05055555, MVEBU_MPP_BASE + 0x10); + writel(0x01106565, MVEBU_MPP_BASE + 0x14); + writel(0x40000000, MVEBU_MPP_BASE + 0x18); + writel(0x00004444, MVEBU_MPP_BASE + 0x1c); + + /* Set GPP Out value */ + writel(DB_AMC_88F68XX_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00); + writel(DB_AMC_88F68XX_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00); + + /* Set GPP Polarity */ + writel(DB_AMC_88F68XX_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c); + writel(DB_AMC_88F68XX_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c); + + /* Set GPP Out Enable */ + writel(DB_AMC_88F68XX_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04); + writel(DB_AMC_88F68XX_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04); + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + return 0; +} + +int checkboard(void) +{ + puts("Board: Marvell DB-88F6820-AMC\n"); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Built in controller(s) come first */ + return pci_eth_init(bis); +} diff --git a/board/Marvell/db-88f6820-amc/kwbimage.cfg b/board/Marvell/db-88f6820-amc/kwbimage.cfg new file mode 100644 index 0000000000..1f748db37c --- /dev/null +++ b/board/Marvell/db-88f6820-amc/kwbimage.cfg @@ -0,0 +1,12 @@ +# +# Copyright (C) 2014 Stefan Roese +# + +# Armada XP uses version 1 image format +VERSION 1 + +# Boot Media configurations +BOOT_FROM spi + +# Binary Header (bin_hdr) with DDR3 training code +BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/configs/db-88f6820-amc_defconfig b/configs/db-88f6820-amc_defconfig new file mode 100644 index 0000000000..5784c45667 --- /dev/null +++ b/configs/db-88f6820-amc_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_DB_88F6820_AMC=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="armada-385-amc" +CONFIG_BOOTDELAY=3 +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=200000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h new file mode 100644 index 0000000000..042ded8320 --- /dev/null +++ b/include/configs/db-88f6820-amc.h @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2014 Stefan Roese + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_DB_88F6820_AMC_H +#define _CONFIG_DB_88F6820_AMC_H + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 +#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_PCI + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +/* Partition support */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* Additional FS support/configuration */ +#define CONFIG_SUPPORT_VFAT + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 1 +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +/* PCIe support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#endif + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* SPL */ +/* + * Select the boot device here + * + * Currently supported are: + * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash + * + * MMC is not populated on this board. + * NAND support may be added in the future. + */ +#define SPL_BOOT_SPI_NOR_FLASH 1 +#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH + +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_SIZE (140 << 10) +#define CONFIG_SPL_TEXT_BASE 0x40000030 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS +#endif + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" +#undef CONFIG_SYS_MAXARGS +#define CONFIG_SYS_MAXARGS 96 + +#endif /* _CONFIG_DB_88F6820_AMC_H */ -- 2.25.1