From be68f34708db920a46d0dd6013b8bdae51685238 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 16 Mar 2016 09:27:04 +0000 Subject: [PATCH] ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg Some u-boot versions for QCA955x set currently not cleared bits depending on the used link speed. This breaks the rx/tx under OpenWrt. The mach-*.c file is responsible to select the correct configuration bits and thus the ath79_setup_qca955x_eth_cfg has to clear the unset. Signed-off-by: Sven Eckelmann SVN-Revision: 49028 --- .../linux/ar71xx/files/arch/mips/ath79/dev-eth.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c index b43c80a376..2f2825f945 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c @@ -833,14 +833,24 @@ void __init ath79_setup_ar934x_eth_rx_delay(unsigned int rxd, void __init ath79_setup_qca955x_eth_cfg(u32 mask) { void __iomem *base; - u32 t; + u32 t, m; + + m = QCA955X_ETH_CFG_RGMII_EN | + QCA955X_ETH_CFG_MII_GE0 | + QCA955X_ETH_CFG_GMII_GE0 | + QCA955X_ETH_CFG_MII_GE0_MASTER | + QCA955X_ETH_CFG_MII_GE0_SLAVE | + QCA955X_ETH_CFG_GE0_ERR_EN | + QCA955X_ETH_CFG_GE0_SGMII | + QCA955X_ETH_CFG_RMII_GE0 | + QCA955X_ETH_CFG_MII_CNTL_SPEED | + QCA955X_ETH_CFG_RMII_GE0_MASTER; base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); - t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); - + t &= ~m; t |= mask; __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); -- 2.25.1