From bd9fa13c731dc9265e9ca8b640449e769a4d3d2d Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 2 Jul 2012 23:12:58 +0000 Subject: [PATCH] kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02 SVN-Revision: 32580 --- ...cma-move-parallel-flash-into-a-union.patch | 10 +- ...cma-add-serial-flash-support-to-bcma.patch | 10 +- .../030-bcm47xx-bcma-nandflash.patch | 8 +- .../patches-3.3/047-bcma-add-new-PCI-ID.patch | 24 - ...ma-complete-workaround-for-BCMA43224.patch | 52 -- ...82-bcma-scan-for-extra-address-space.patch | 45 -- .../232-ssb-recognise-ARM-Cortex-M3.patch | 21 - ...bcma-fix-NP-in-bcma_core_pci_irq_ctl.patch | 20 - .../brcm47xx/patches-3.3/999-wl_exports.patch | 2 +- .../generic/patches-3.3/020-ssb_update.patch | 27 +- .../patches-3.3/025-bcma_backport.patch | 698 +++++++++++++++++- 11 files changed, 703 insertions(+), 214 deletions(-) delete mode 100644 target/linux/brcm47xx/patches-3.3/047-bcma-add-new-PCI-ID.patch delete mode 100644 target/linux/brcm47xx/patches-3.3/052-bcma-complete-workaround-for-BCMA43224.patch delete mode 100644 target/linux/brcm47xx/patches-3.3/182-bcma-scan-for-extra-address-space.patch delete mode 100644 target/linux/brcm47xx/patches-3.3/232-ssb-recognise-ARM-Cortex-M3.patch delete mode 100644 target/linux/brcm47xx/patches-3.3/233-bcma-fix-NP-in-bcma_core_pci_irq_ctl.patch diff --git a/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch index 0042ff7ed8..286508d543 100644 --- a/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch +++ b/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch @@ -91,9 +91,9 @@ #define BCMA_CC_BCAST_ADDR 0x0050 #define BCMA_CC_BCAST_DATA 0x0054 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ -@@ -324,6 +382,12 @@ - #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ - #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ +@@ -346,6 +404,12 @@ + /* 4313 Chip specific ChipControl register bits */ + #define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ +#define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ +#define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ @@ -104,7 +104,7 @@ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -@@ -333,6 +397,10 @@ struct bcma_chipcommon_pmu { +@@ -355,6 +419,10 @@ struct bcma_chipcommon_pmu { }; #ifdef CONFIG_BCMA_DRIVER_MIPS @@ -115,7 +115,7 @@ struct bcma_pflash { u8 buswidth; u32 window; -@@ -358,7 +426,10 @@ struct bcma_drv_cc { +@@ -380,7 +448,10 @@ struct bcma_drv_cc { u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; #ifdef CONFIG_BCMA_DRIVER_MIPS diff --git a/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch index 2de4ba0f52..a4c9f4336a 100644 --- a/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch +++ b/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch @@ -455,7 +455,7 @@ pr_info("found parallel flash.\n"); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -399,6 +399,7 @@ struct bcma_chipcommon_pmu { +@@ -421,6 +421,7 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS enum bcma_flash_type { BCMA_PFLASH, @@ -463,7 +463,7 @@ }; struct bcma_pflash { -@@ -407,6 +408,14 @@ struct bcma_pflash { +@@ -429,6 +430,14 @@ struct bcma_pflash { u32 window_size; }; @@ -478,7 +478,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -429,6 +438,9 @@ struct bcma_drv_cc { +@@ -451,6 +460,9 @@ struct bcma_drv_cc { enum bcma_flash_type flash_type; union { struct bcma_pflash pflash; @@ -488,9 +488,9 @@ }; int nr_serial_ports; -@@ -483,4 +495,14 @@ extern void bcma_chipco_chipctl_maskset( - extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, +@@ -506,4 +518,14 @@ extern void bcma_chipco_regctl_maskset(s u32 offset, u32 mask, u32 set); + extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); +#ifdef CONFIG_BCMA_SFLASH +/* Chipcommon sflash support. */ diff --git a/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch b/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch index 00f3311a0d..ed3392b88e 100644 --- a/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch +++ b/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch @@ -971,7 +971,7 @@ +MODULE_DESCRIPTION("BCM47XX NAND flash driver"); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -400,6 +400,7 @@ struct bcma_chipcommon_pmu { +@@ -422,6 +422,7 @@ struct bcma_chipcommon_pmu { enum bcma_flash_type { BCMA_PFLASH, BCMA_SFLASH, @@ -979,7 +979,7 @@ }; struct bcma_pflash { -@@ -416,6 +417,14 @@ struct bcma_sflash { +@@ -438,6 +439,14 @@ struct bcma_sflash { }; #endif /* CONFIG_BCMA_SFLASH */ @@ -994,7 +994,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -441,6 +450,9 @@ struct bcma_drv_cc { +@@ -463,6 +472,9 @@ struct bcma_drv_cc { #ifdef CONFIG_BCMA_SFLASH struct bcma_sflash sflash; #endif /* CONFIG_BCMA_SFLASH */ @@ -1004,7 +1004,7 @@ }; int nr_serial_ports; -@@ -505,4 +517,13 @@ int bcma_sflash_write(struct bcma_drv_cc +@@ -528,4 +540,13 @@ int bcma_sflash_write(struct bcma_drv_cc int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset); #endif /* CONFIG_BCMA_SFLASH */ diff --git a/target/linux/brcm47xx/patches-3.3/047-bcma-add-new-PCI-ID.patch b/target/linux/brcm47xx/patches-3.3/047-bcma-add-new-PCI-ID.patch deleted file mode 100644 index fb658345e6..0000000000 --- a/target/linux/brcm47xx/patches-3.3/047-bcma-add-new-PCI-ID.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 699c57a18b40ffbe1763915acdc1a3e4fb539d01 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Fri, 13 Jan 2012 17:42:15 +0100 -Subject: [PATCH 29/32] bcma: add new PCI ID - -This ID was found on the PCIe wireless card on the board of a Netgear -WNDR3400 using a bcm4716. The device with this ID is identified by b43 -as "Broadcom 43224 WLAN". - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/host_pci.c | 1 + - 1 files changed, 1 insertions(+), 0 deletions(-) - ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -272,6 +272,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0xa8d8) }, - { 0, }, - }; - MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl); diff --git a/target/linux/brcm47xx/patches-3.3/052-bcma-complete-workaround-for-BCMA43224.patch b/target/linux/brcm47xx/patches-3.3/052-bcma-complete-workaround-for-BCMA43224.patch deleted file mode 100644 index 7e40fc80b7..0000000000 --- a/target/linux/brcm47xx/patches-3.3/052-bcma-complete-workaround-for-BCMA43224.patch +++ /dev/null @@ -1,52 +0,0 @@ -From efe89df0326b777563d197b8cf1c25209a31ceb0 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 21 Jan 2012 18:47:42 +0100 -Subject: [PATCH 32/34] bcma: complete workaround for BCMA43224 - - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/driver_chipcommon_pmu.c | 15 +++++++++++---- - include/linux/bcma/bcma_driver_chipcommon.h | 5 +++++ - 2 files changed, 16 insertions(+), 4 deletions(-) - ---- a/drivers/bcma/driver_chipcommon_pmu.c -+++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -142,12 +142,19 @@ void bcma_pmu_workarounds(struct bcma_dr - /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ - break; - case 43224: -+ case 43421: -+ /* enable 12 mA drive strenth for 43224 and set chipControl register bit 15 */ - if (bus->chipinfo.rev == 0) { -- pr_err("Workarounds for 43224 rev 0 not fully " -- "implemented\n"); -- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0); -+ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL, -+ BCMA_CCTRL_43224_GPIO_TOGGLE, -+ BCMA_CCTRL_43224_GPIO_TOGGLE); -+ bcma_chipco_chipctl_maskset(cc, 0, -+ BCMA_CCTRL_43224A0_12MA_LED_DRIVE, -+ BCMA_CCTRL_43224A0_12MA_LED_DRIVE); - } else { -- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); -+ bcma_chipco_chipctl_maskset(cc, 0, -+ BCMA_CCTRL_43224B0_12MA_LED_DRIVE, -+ BCMA_CCTRL_43224B0_12MA_LED_DRIVE); - } - break; - case 43225: ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -382,6 +382,11 @@ - #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ - #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ - -+/* 43224 chip-specific ChipControl register bits */ -+#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */ -+#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ -+#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ -+ - #define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ - #define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ - #define BCMA_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ diff --git a/target/linux/brcm47xx/patches-3.3/182-bcma-scan-for-extra-address-space.patch b/target/linux/brcm47xx/patches-3.3/182-bcma-scan-for-extra-address-space.patch deleted file mode 100644 index fdf5cfbe9d..0000000000 --- a/target/linux/brcm47xx/patches-3.3/182-bcma-scan-for-extra-address-space.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -323,6 +323,23 @@ static int bcma_get_next_core(struct bcm - return -EILSEQ; - } - -+ /* First Slave Address Descriptor should be port 0: -+ * the main register space for the core -+ */ -+ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); -+ if (tmp <= 0) { -+ /* Try again to see if it is a bridge */ -+ tmp = bcma_erom_get_addr_desc(bus, eromptr, -+ SCAN_ADDR_TYPE_BRIDGE, 0); -+ if (tmp <= 0) { -+ return -EILSEQ; -+ } else { -+ pr_info("Bridge found\n"); -+ return -ENXIO; -+ } -+ } -+ core->addr = tmp; -+ - /* get & parse slave ports */ - for (i = 0; i < ports[1]; i++) { - for (j = 0; ; j++) { -@@ -335,7 +352,7 @@ static int bcma_get_next_core(struct bcm - break; - } else { - if (i == 0 && j == 0) -- core->addr = tmp; -+ core->addr1 = tmp; - } - } - } ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -144,6 +144,7 @@ struct bcma_device { - u8 core_unit; - - u32 addr; -+ u32 addr1; - u32 wrap; - - void __iomem *io_addr; diff --git a/target/linux/brcm47xx/patches-3.3/232-ssb-recognise-ARM-Cortex-M3.patch b/target/linux/brcm47xx/patches-3.3/232-ssb-recognise-ARM-Cortex-M3.patch deleted file mode 100644 index a2b01f476b..0000000000 --- a/target/linux/brcm47xx/patches-3.3/232-ssb-recognise-ARM-Cortex-M3.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/ssb/scan.c -+++ b/drivers/ssb/scan.c -@@ -90,6 +90,8 @@ const char *ssb_core_name(u16 coreid) - return "ARM 1176"; - case SSB_DEV_ARM_7TDMI: - return "ARM 7TDMI"; -+ case SSB_DEV_ARM_CM3: -+ return "ARM Cortex M3"; - } - return "UNKNOWN"; - } ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -243,6 +243,7 @@ struct ssb_bus_ops { - #define SSB_DEV_MINI_MACPHY 0x823 - #define SSB_DEV_ARM_1176 0x824 - #define SSB_DEV_ARM_7TDMI 0x825 -+#define SSB_DEV_ARM_CM3 0x82A - - /* Vendor-ID values */ - #define SSB_VENDOR_BROADCOM 0x4243 diff --git a/target/linux/brcm47xx/patches-3.3/233-bcma-fix-NP-in-bcma_core_pci_irq_ctl.patch b/target/linux/brcm47xx/patches-3.3/233-bcma-fix-NP-in-bcma_core_pci_irq_ctl.patch deleted file mode 100644 index 9843f973a8..0000000000 --- a/target/linux/brcm47xx/patches-3.3/233-bcma-fix-NP-in-bcma_core_pci_irq_ctl.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -232,7 +232,7 @@ void __devinit bcma_core_pci_init(struct - int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, - bool enable) - { -- struct pci_dev *pdev = pc->core->bus->host_pci; -+ struct pci_dev *pdev; - u32 coremask, tmp; - int err = 0; - -@@ -243,6 +243,8 @@ int bcma_core_pci_irq_ctl(struct bcma_dr - goto out; - } - -+ pdev = pc->core->bus->host_pci; -+ - err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); - if (err) - goto out; diff --git a/target/linux/brcm47xx/patches-3.3/999-wl_exports.patch b/target/linux/brcm47xx/patches-3.3/999-wl_exports.patch index 550f4c9683..e45b402426 100644 --- a/target/linux/brcm47xx/patches-3.3/999-wl_exports.patch +++ b/target/linux/brcm47xx/patches-3.3/999-wl_exports.patch @@ -12,7 +12,7 @@ --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c -@@ -57,6 +57,7 @@ void (*_dma_cache_wback)(unsigned long s +@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s void (*_dma_cache_inv)(unsigned long start, unsigned long size); EXPORT_SYMBOL(_dma_cache_wback_inv); diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch index 01e087a316..e427574f77 100644 --- a/target/linux/generic/patches-3.3/020-ssb_update.patch +++ b/target/linux/generic/patches-3.3/020-ssb_update.patch @@ -1,6 +1,6 @@ --- a/drivers/ssb/b43_pci_bridge.c +++ b/drivers/ssb/b43_pci_bridge.c -@@ -29,6 +29,8 @@ static const struct pci_device_id b43_pc +@@ -29,11 +29,14 @@ static const struct pci_device_id b43_pc { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, @@ -9,6 +9,12 @@ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432c) }, + { 0, }, + }; + MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl); --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -13,6 +13,9 @@ @@ -444,7 +450,16 @@ GOTO_ERROR_ON((tuple->TupleDataLen != 3) && --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c -@@ -318,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -90,6 +90,8 @@ const char *ssb_core_name(u16 coreid) + return "ARM 1176"; + case SSB_DEV_ARM_7TDMI: + return "ARM 7TDMI"; ++ case SSB_DEV_ARM_CM3: ++ return "ARM Cortex M3"; + } + return "UNKNOWN"; + } +@@ -318,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus, bus->chip_package = 0; } } @@ -650,6 +665,14 @@ }; +@@ -166,6 +243,7 @@ struct ssb_bus_ops { + #define SSB_DEV_MINI_MACPHY 0x823 + #define SSB_DEV_ARM_1176 0x824 + #define SSB_DEV_ARM_7TDMI 0x825 ++#define SSB_DEV_ARM_CM3 0x82A + + /* Vendor-ID values */ + #define SSB_VENDOR_BROADCOM 0x4243 --- a/include/linux/ssb/ssb_driver_gige.h +++ b/include/linux/ssb/ssb_driver_gige.h @@ -2,6 +2,7 @@ diff --git a/target/linux/generic/patches-3.3/025-bcma_backport.patch b/target/linux/generic/patches-3.3/025-bcma_backport.patch index 3fb7a564fa..d2592782a4 100644 --- a/target/linux/generic/patches-3.3/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.3/025-bcma_backport.patch @@ -55,14 +55,464 @@ } --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -80,6 +80,7 @@ static void bcma_pmu_resources_init(stru +@@ -3,7 +3,8 @@ + * ChipCommon Power Management Unit driver + * + * Copyright 2009, Michael Buesch +- * Copyright 2007, Broadcom Corporation ++ * Copyright 2007, 2011, Broadcom Corporation ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -54,38 +55,19 @@ void bcma_chipco_regctl_maskset(struct b + } + EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +-static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +-{ +- struct bcma_bus *bus = cc->core->bus; +- +- switch (bus->chipinfo.id) { +- case 0x4313: +- case 0x4331: +- case 43224: +- case 43225: +- break; +- default: +- pr_err("PLL init unknown for device 0x%04X\n", +- bus->chipinfo.id); +- } +-} +- + static void bcma_pmu_resources_init(struct bcma_drv_cc *cc) + { + struct bcma_bus *bus = cc->core->bus; + u32 min_msk = 0, max_msk = 0; + + switch (bus->chipinfo.id) { +- case 0x4313: ++ case BCMA_CHIP_ID_BCM4313: min_msk = 0x200D; max_msk = 0xFFFF; break; -+ case 0x4331: - case 43224: - case 43225: +- case 43224: +- case 43225: +- break; + default: +- pr_err("PMU resource config unknown for device 0x%04X\n", +- bus->chipinfo.id); ++ pr_debug("PMU resource config unknown or not needed for device 0x%04X\n", ++ bus->chipinfo.id); + } + + /* Set the resource masks. */ +@@ -93,22 +75,9 @@ static void bcma_pmu_resources_init(stru + bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); + if (max_msk) + bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); +-} +- +-void bcma_pmu_swreg_init(struct bcma_drv_cc *cc) +-{ +- struct bcma_bus *bus = cc->core->bus; + +- switch (bus->chipinfo.id) { +- case 0x4313: +- case 0x4331: +- case 43224: +- case 43225: +- break; +- default: +- pr_err("PMU switch/regulators init unknown for device " +- "0x%04X\n", bus->chipinfo.id); +- } ++ /* Add some delay; allow resources to come up and settle. */ ++ mdelay(2); + } + + /* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ +@@ -122,8 +91,11 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct + val |= BCMA_CHIPCTL_4331_EXTPA_EN; + if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) + val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ else if (bus->chipinfo.rev > 0) ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN2; + } else { + val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN2; + val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; + } + bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); +@@ -134,26 +106,38 @@ void bcma_pmu_workarounds(struct bcma_dr + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { +- case 0x4313: +- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); ++ case BCMA_CHIP_ID_BCM4313: ++ /* enable 12 mA drive strenth for 4313 and set chipControl ++ register bit 1 */ ++ bcma_chipco_chipctl_maskset(cc, 0, ++ BCMA_CCTRL_4313_12MA_LED_DRIVE, ++ BCMA_CCTRL_4313_12MA_LED_DRIVE); + break; +- case 0x4331: +- /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ ++ case BCMA_CHIP_ID_BCM4331: ++ case BCMA_CHIP_ID_BCM43431: ++ /* Ext PA lines must be enabled for tx on BCM4331 */ ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true); + break; +- case 43224: ++ case BCMA_CHIP_ID_BCM43224: ++ case BCMA_CHIP_ID_BCM43421: ++ /* enable 12 mA drive strenth for 43224 and set chipControl ++ register bit 15 */ + if (bus->chipinfo.rev == 0) { +- pr_err("Workarounds for 43224 rev 0 not fully " +- "implemented\n"); +- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL, ++ BCMA_CCTRL_43224_GPIO_TOGGLE, ++ BCMA_CCTRL_43224_GPIO_TOGGLE); ++ bcma_chipco_chipctl_maskset(cc, 0, ++ BCMA_CCTRL_43224A0_12MA_LED_DRIVE, ++ BCMA_CCTRL_43224A0_12MA_LED_DRIVE); + } else { +- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); ++ bcma_chipco_chipctl_maskset(cc, 0, ++ BCMA_CCTRL_43224B0_12MA_LED_DRIVE, ++ BCMA_CCTRL_43224B0_12MA_LED_DRIVE); + } break; +- case 43225: +- break; + default: +- pr_err("Workarounds unknown for device 0x%04X\n", +- bus->chipinfo.id); ++ pr_debug("Workarounds unknown or not needed for device 0x%04X\n", ++ bus->chipinfo.id); + } + } + +@@ -174,12 +158,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c + bcma_cc_set32(cc, BCMA_CC_PMU_CTL, + BCMA_CC_PMU_CTL_NOILPONW); + +- if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2) +- pr_err("Fix for 4329b0 bad LPOM state not implemented!\n"); +- +- bcma_pmu_pll_init(cc); + bcma_pmu_resources_init(cc); +- bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); + } + +@@ -188,17 +167,17 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { +- case 0x4716: +- case 0x4748: +- case 47162: +- case 0x4313: +- case 0x5357: +- case 0x4749: +- case 53572: ++ case BCMA_CHIP_ID_BCM4716: ++ case BCMA_CHIP_ID_BCM4748: ++ case BCMA_CHIP_ID_BCM47162: ++ case BCMA_CHIP_ID_BCM4313: ++ case BCMA_CHIP_ID_BCM5357: ++ case BCMA_CHIP_ID_BCM4749: ++ case BCMA_CHIP_ID_BCM53572: + /* always 20Mhz */ + return 20000 * 1000; +- case 0x5356: +- case 0x5300: ++ case BCMA_CHIP_ID_BCM5356: ++ case BCMA_CHIP_ID_BCM4706: + /* always 25Mhz */ + return 25000 * 1000; + default: +@@ -221,7 +200,8 @@ static u32 bcma_pmu_clock(struct bcma_dr + + BUG_ON(!m || m > 4); + +- if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || ++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) { + /* Detect failure in clock setting */ + tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + if (tmp & 0x40000) +@@ -253,22 +233,22 @@ u32 bcma_pmu_get_clockcontrol(struct bcm + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { +- case 0x4716: +- case 0x4748: +- case 47162: ++ case BCMA_CHIP_ID_BCM4716: ++ case BCMA_CHIP_ID_BCM4748: ++ case BCMA_CHIP_ID_BCM47162: + return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); +- case 0x5356: ++ case BCMA_CHIP_ID_BCM5356: + return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); +- case 0x5357: +- case 0x4749: ++ case BCMA_CHIP_ID_BCM5357: ++ case BCMA_CHIP_ID_BCM4749: + return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); +- case 0x5300: ++ case BCMA_CHIP_ID_BCM4706: + return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); +- case 53572: ++ case BCMA_CHIP_ID_BCM53572: + return 75000000; + default: + pr_warn("No backplane clock specified for %04X device, " +@@ -283,17 +263,17 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr + { + struct bcma_bus *bus = cc->core->bus; + +- if (bus->chipinfo.id == 53572) ++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) + return 300000000; + + if (cc->pmu.rev >= 5) { + u32 pll; + switch (bus->chipinfo.id) { +- case 0x5356: ++ case BCMA_CHIP_ID_BCM5356: + pll = BCMA_CC_PMU5356_MAINPLL_PLL0; + break; +- case 0x5357: +- case 0x4749: ++ case BCMA_CHIP_ID_BCM5357: ++ case BCMA_CHIP_ID_BCM4749: + pll = BCMA_CC_PMU5357_MAINPLL_PLL0; + break; + default: +@@ -301,10 +281,190 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr + break; + } + +- /* TODO: if (bus->chipinfo.id == 0x5300) ++ /* TODO: if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) + return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ + return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); + } + + return bcma_pmu_get_clockcontrol(cc); + } ++ ++static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++ ++void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid) ++{ ++ u32 tmp = 0; ++ u8 phypll_offset = 0; ++ u8 bcm5357_bcm43236_p1div[] = {0x1, 0x5, 0x5}; ++ u8 bcm5357_bcm43236_ndiv[] = {0x30, 0xf6, 0xfc}; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM5357: ++ case BCMA_CHIP_ID_BCM4749: ++ case BCMA_CHIP_ID_BCM53572: ++ /* 5357[ab]0, 43236[ab]0, and 6362b0 */ ++ ++ /* BCM5357 needs to touch PLL1_PLLCTL[02], ++ so offset PLL0_PLLCTL[02] by 6 */ ++ phypll_offset = (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || ++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4749 || ++ bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0; ++ ++ /* RMW only the P1 divider */ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, ++ BCMA_CC_PMU_PLL_CTL0 + phypll_offset); ++ tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++ tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK)); ++ tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); ++ ++ /* RMW only the int feedback divider */ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, ++ BCMA_CC_PMU_PLL_CTL2 + phypll_offset); ++ tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++ tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK); ++ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); ++ ++ tmp = 1 << 10; ++ break; ++ ++ case BCMA_CHIP_ID_BCM4331: ++ case BCMA_CHIP_ID_BCM43431: ++ if (spuravoid == 2) { ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, ++ 0x11500014); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, ++ 0x0FC00a08); ++ } else if (spuravoid == 1) { ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, ++ 0x11500014); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, ++ 0x0F600a08); ++ } else { ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, ++ 0x11100014); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, ++ 0x03000a08); ++ } ++ tmp = 1 << 10; ++ break; ++ ++ case BCMA_CHIP_ID_BCM43224: ++ case BCMA_CHIP_ID_BCM43225: ++ case BCMA_CHIP_ID_BCM43421: ++ if (spuravoid == 1) { ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, ++ 0x11500010); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, ++ 0x000C0C06); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, ++ 0x0F600a08); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, ++ 0x00000000); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, ++ 0x2001E920); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, ++ 0x88888815); ++ } else { ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, ++ 0x11100010); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, ++ 0x000c0c06); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, ++ 0x03000a08); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, ++ 0x00000000); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, ++ 0x200005c0); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, ++ 0x88888815); ++ } ++ tmp = 1 << 10; ++ break; ++ ++ case BCMA_CHIP_ID_BCM4716: ++ case BCMA_CHIP_ID_BCM4748: ++ case BCMA_CHIP_ID_BCM47162: ++ if (spuravoid == 1) { ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, ++ 0x11500060); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, ++ 0x080C0C06); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, ++ 0x0F600000); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, ++ 0x00000000); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, ++ 0x2001E924); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, ++ 0x88888815); ++ } else { ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, ++ 0x11100060); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, ++ 0x080c0c06); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, ++ 0x03000000); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, ++ 0x00000000); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, ++ 0x200005c0); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, ++ 0x88888815); ++ } ++ ++ tmp = 3 << 9; ++ break; ++ ++ case BCMA_CHIP_ID_BCM43227: ++ case BCMA_CHIP_ID_BCM43228: ++ case BCMA_CHIP_ID_BCM43428: ++ /* LCNXN */ ++ /* PLL Settings for spur avoidance on/off mode, ++ no on2 support for 43228A0 */ ++ if (spuravoid == 1) { ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, ++ 0x01100014); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, ++ 0x040C0C06); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, ++ 0x03140A08); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, ++ 0x00333333); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, ++ 0x202C2820); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, ++ 0x88888815); ++ } else { ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0, ++ 0x11100014); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1, ++ 0x040c0c06); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, ++ 0x03000a08); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3, ++ 0x00000000); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4, ++ 0x200005c0); ++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, ++ 0x88888815); ++ } ++ tmp = 1 << 10; ++ break; ++ default: ++ pr_err("unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", ++ bus->chipinfo.id); ++ break; ++ } ++ ++ tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL); ++ bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp); ++} ++EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate); +--- a/drivers/bcma/driver_mips.c ++++ b/drivers/bcma/driver_mips.c +@@ -22,15 +22,15 @@ + /* The 47162a0 hangs when reading MIPS DMP registers registers */ + static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) + { +- return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && +- dev->id.id == BCMA_CORE_MIPS_74K; ++ return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 && ++ dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K; + } + + /* The 5357b0 hangs when reading USB20H DMP registers */ + static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) + { +- return (dev->bus->chipinfo.id == 0x5357 || +- dev->bus->chipinfo.id == 0x4749) && ++ return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || ++ dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) && + dev->bus->chipinfo.pkg == 11 && + dev->id.id == BCMA_CORE_USB20_HOST; + } --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -2,8 +2,9 @@ @@ -250,7 +700,7 @@ } /************************************************** -@@ -138,72 +143,90 @@ static void bcma_pcie_mdio_write(struct +@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) { @@ -383,7 +833,27 @@ } int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, -@@ -236,3 +259,17 @@ out: + bool enable) + { +- struct pci_dev *pdev = pc->core->bus->host_pci; ++ struct pci_dev *pdev; + u32 coremask, tmp; + int err = 0; + +- if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) { + /* This bcma device is not on a PCI host-bus. So the IRQs are + * not routed through the PCI core. + * So we must not enable routing through the PCI core. */ + goto out; + } + ++ pdev = pc->core->bus->host_pci; ++ + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) + goto out; +@@ -236,3 +261,17 @@ out: return err; } EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); @@ -403,7 +873,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c -@@ -2,13 +2,588 @@ +@@ -2,13 +2,590 @@ * Broadcom specific AMBA * PCI Core in hostmode * @@ -622,7 +1092,8 @@ + } else { + writel(val, mmio); + -+ if (chipid == 0x4716 || chipid == 0x4748) ++ if (chipid == BCMA_CHIP_ID_BCM4716 || ++ chipid == BCMA_CHIP_ID_BCM4748) + readl(mmio); + } + @@ -841,13 +1312,14 @@ + * as mips can't generate 64-bit address on the + * backplane. + */ -+ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4716 || ++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4748) { + pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); -+ } else if (bus->chipinfo.id == 0x5300) { ++ } else if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) { + tmp = BCMA_CORE_PCI_SBTOPCI_MEM; + tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; + tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; @@ -1026,7 +1498,15 @@ { struct bcma_bus *bus = pci_get_drvdata(dev); -@@ -277,7 +280,7 @@ static struct pci_driver bcma_pci_bridge +@@ -265,6 +268,7 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc + + static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, +@@ -277,7 +281,7 @@ static struct pci_driver bcma_pci_bridge .name = "bcma-pci-bridge", .id_table = bcma_pci_bridge_tbl, .probe = bcma_host_pci_probe, @@ -1095,7 +1575,7 @@ if (err) { --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -19,7 +19,14 @@ struct bcma_device_id_name { +@@ -19,15 +19,27 @@ struct bcma_device_id_name { u16 id; const char *name; }; @@ -1109,9 +1589,15 @@ + +static const struct bcma_device_id_name bcma_bcm_device_names[] = { { BCMA_CORE_OOB_ROUTER, "OOB Router" }, ++ { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, ++ { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, ++ { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, ++ { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, ++ { BCMA_CORE_ALTA, "ALTA (I2S)" }, ++ { BCMA_CORE_4706_MAC_GBIT_COMMON, "BCM4706 GBit MAC Common" }, { BCMA_CORE_INVALID, "Invalid" }, { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, -@@ -27,7 +34,6 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_ILINE20, "ILine 20" }, { BCMA_CORE_SRAM, "SRAM" }, { BCMA_CORE_SDRAM, "SDRAM" }, { BCMA_CORE_PCI, "PCI" }, @@ -1119,7 +1605,7 @@ { BCMA_CORE_ETHERNET, "Fast Ethernet" }, { BCMA_CORE_V90, "V90" }, { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, -@@ -44,7 +50,6 @@ struct bcma_device_id_name bcma_device_n +@@ -44,7 +56,6 @@ struct bcma_device_id_name bcma_device_n { BCMA_CORE_PHY_A, "PHY A" }, { BCMA_CORE_PHY_B, "PHY B" }, { BCMA_CORE_PHY_G, "PHY G" }, @@ -1127,7 +1613,7 @@ { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, -@@ -58,15 +63,11 @@ struct bcma_device_id_name bcma_device_n +@@ -58,15 +69,11 @@ struct bcma_device_id_name bcma_device_n { BCMA_CORE_PHY_N, "PHY N" }, { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, @@ -1143,7 +1629,7 @@ { BCMA_CORE_MAC_GBIT, "GBit MAC" }, { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, -@@ -79,16 +80,41 @@ struct bcma_device_id_name bcma_device_n +@@ -79,16 +86,41 @@ struct bcma_device_id_name bcma_device_n { BCMA_CORE_SHIM, "SHIM" }, { BCMA_CORE_DEFAULT, "Default" }, }; @@ -1192,7 +1678,7 @@ return "UNKNOWN"; } -@@ -212,6 +238,17 @@ static struct bcma_device *bcma_find_cor +@@ -212,6 +244,17 @@ static struct bcma_device *bcma_find_cor return NULL; } @@ -1210,7 +1696,40 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, struct bcma_device_id *match, int core_num, struct bcma_device *core) -@@ -353,6 +390,7 @@ static int bcma_get_next_core(struct bcm +@@ -286,6 +329,23 @@ static int bcma_get_next_core(struct bcm + return -EILSEQ; + } + ++ /* First Slave Address Descriptor should be port 0: ++ * the main register space for the core ++ */ ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); ++ if (tmp <= 0) { ++ /* Try again to see if it is a bridge */ ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_BRIDGE, 0); ++ if (tmp <= 0) { ++ return -EILSEQ; ++ } else { ++ pr_info("Bridge found\n"); ++ return -ENXIO; ++ } ++ } ++ core->addr = tmp; ++ + /* get & parse slave ports */ + for (i = 0; i < ports[1]; i++) { + for (j = 0; ; j++) { +@@ -298,7 +358,7 @@ static int bcma_get_next_core(struct bcm + break; + } else { + if (i == 0 && j == 0) +- core->addr = tmp; ++ core->addr1 = tmp; + } + } + } +@@ -353,6 +413,7 @@ static int bcma_get_next_core(struct bcm void bcma_init_bus(struct bcma_bus *bus) { s32 tmp; @@ -1218,7 +1737,7 @@ if (bus->init_done) return; -@@ -363,9 +401,12 @@ void bcma_init_bus(struct bcma_bus *bus) +@@ -363,9 +424,12 @@ void bcma_init_bus(struct bcma_bus *bus) bcma_scan_switch_core(bus, BCMA_ADDR_BASE); tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); @@ -1234,7 +1753,7 @@ bus->init_done = true; } -@@ -392,6 +433,7 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -392,6 +456,7 @@ int bcma_bus_scan(struct bcma_bus *bus) bcma_scan_switch_core(bus, erombase); while (eromptr < eromend) { @@ -1242,7 +1761,7 @@ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); if (!core) return -ENOMEM; -@@ -414,6 +456,8 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -414,6 +479,8 @@ int bcma_bus_scan(struct bcma_bus *bus) core->core_index = core_num++; bus->nr_cores++; @@ -1360,7 +1879,7 @@ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; -@@ -137,85 +216,363 @@ static void bcma_sprom_extract_r8(struct +@@ -137,102 +216,378 @@ static void bcma_sprom_extract_r8(struct *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); } @@ -1681,11 +2200,11 @@ + /* older chipcommon revisions use chip status register */ + chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); + switch (bus->chipinfo.id) { -+ case 0x4313: ++ case BCMA_CHIP_ID_BCM4313: + present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; + break; + -+ case 0x4331: ++ case BCMA_CHIP_ID_BCM4331: + present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; + break; + @@ -1707,16 +2226,16 @@ + + chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); + switch (bus->chipinfo.id) { -+ case 0x4313: ++ case BCMA_CHIP_ID_BCM4313: + present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; + break; + -+ case 0x4331: ++ case BCMA_CHIP_ID_BCM4331: + present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; + break; + -+ case 43224: -+ case 43225: ++ case BCMA_CHIP_ID_BCM43224: ++ case BCMA_CHIP_ID_BCM43225: + /* for these chips OTP is always available */ + present = true; + break; @@ -1792,8 +2311,12 @@ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); -@@ -225,11 +582,7 @@ int bcma_sprom_get(struct bcma_bus *bus) - if (bus->chipinfo.id == 0x4331) + if (!sprom) + return -ENOMEM; + +- if (bus->chipinfo.id == 0x4331) ++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 || ++ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); - /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). @@ -1804,7 +2327,12 @@ + pr_debug("SPROM offset 0x%x\n", offset); bcma_sprom_read(bus, offset, sprom); - if (bus->chipinfo.id == 0x4331) +- if (bus->chipinfo.id == 0x4331) ++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 || ++ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); + + err = bcma_sprom_valid(sprom); --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -26,6 +26,11 @@ struct bcma_chipinfo { @@ -1819,15 +2347,69 @@ enum bcma_clkmode { BCMA_CLKMODE_FAST, BCMA_CLKMODE_DYNAMIC, -@@ -136,6 +141,7 @@ struct bcma_device { +@@ -65,6 +70,13 @@ struct bcma_host_ops { + + /* Core-ID values. */ + #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ ++#define BCMA_CORE_4706_CHIPCOMMON 0x500 ++#define BCMA_CORE_4706_SOC_RAM 0x50E ++#define BCMA_CORE_4706_MAC_GBIT 0x52D ++#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ ++#define BCMA_CORE_ALTA 0x534 /* I2S core */ ++#define BCMA_CORE_4706_MAC_GBIT_COMMON 0x5DC ++#define BCMA_CORE_DDR23_PHY 0x5DD + #define BCMA_CORE_INVALID 0x700 + #define BCMA_CORE_CHIPCOMMON 0x800 + #define BCMA_CORE_ILINE20 0x801 +@@ -125,6 +137,36 @@ struct bcma_host_ops { + + #define BCMA_MAX_NR_CORES 16 + ++/* Chip IDs of PCIe devices */ ++#define BCMA_CHIP_ID_BCM4313 0x4313 ++#define BCMA_CHIP_ID_BCM43224 43224 ++#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 ++#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa ++#define BCMA_CHIP_ID_BCM43225 43225 ++#define BCMA_CHIP_ID_BCM43227 43227 ++#define BCMA_CHIP_ID_BCM43228 43228 ++#define BCMA_CHIP_ID_BCM43421 43421 ++#define BCMA_CHIP_ID_BCM43428 43428 ++#define BCMA_CHIP_ID_BCM43431 43431 ++#define BCMA_CHIP_ID_BCM43460 43460 ++#define BCMA_CHIP_ID_BCM4331 0x4331 ++#define BCMA_CHIP_ID_BCM6362 0x6362 ++#define BCMA_CHIP_ID_BCM4360 0x4360 ++#define BCMA_CHIP_ID_BCM4352 0x4352 ++ ++/* Chip IDs of SoCs */ ++#define BCMA_CHIP_ID_BCM4706 0x5300 ++#define BCMA_CHIP_ID_BCM4716 0x4716 ++#define BCMA_PKG_ID_BCM4716 8 ++#define BCMA_PKG_ID_BCM4717 9 ++#define BCMA_PKG_ID_BCM4718 10 ++#define BCMA_CHIP_ID_BCM47162 47162 ++#define BCMA_CHIP_ID_BCM4748 0x4748 ++#define BCMA_CHIP_ID_BCM4749 0x4749 ++#define BCMA_CHIP_ID_BCM5356 0x5356 ++#define BCMA_CHIP_ID_BCM5357 0x5357 ++#define BCMA_CHIP_ID_BCM53572 53572 ++ + struct bcma_device { + struct bcma_bus *bus; + struct bcma_device_id id; +@@ -136,8 +178,10 @@ struct bcma_device { bool dev_registered; u8 core_index; + u8 core_unit; u32 addr; ++ u32 addr1; u32 wrap; -@@ -175,6 +181,12 @@ int __bcma_driver_register(struct bcma_d + + void __iomem *io_addr; +@@ -175,6 +219,12 @@ int __bcma_driver_register(struct bcma_d extern void bcma_driver_unregister(struct bcma_driver *drv); @@ -1840,7 +2422,7 @@ struct bcma_bus { /* The MMIO area. */ void __iomem *mmio; -@@ -191,10 +203,13 @@ struct bcma_bus { +@@ -191,10 +241,13 @@ struct bcma_bus { struct bcma_chipinfo chipinfo; @@ -1854,7 +2436,7 @@ struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; -@@ -282,6 +297,7 @@ static inline void bcma_maskset16(struct +@@ -282,6 +335,7 @@ static inline void bcma_maskset16(struct bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); } @@ -1925,6 +2507,52 @@ /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 +@@ -284,6 +308,19 @@ + #define BCMA_CC_PPL_PCHI_OFF 5 + #define BCMA_CC_PPL_PCHI_MASK 0x0000003f + ++#define BCMA_CC_PMU_PLL_CTL0 0 ++#define BCMA_CC_PMU_PLL_CTL1 1 ++#define BCMA_CC_PMU_PLL_CTL2 2 ++#define BCMA_CC_PMU_PLL_CTL3 3 ++#define BCMA_CC_PMU_PLL_CTL4 4 ++#define BCMA_CC_PMU_PLL_CTL5 5 ++ ++#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000 ++#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20 ++ ++#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 ++#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 ++ + /* BCM4331 ChipControl numbers. */ + #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ + #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ +@@ -297,9 +334,18 @@ + #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ + #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ + #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */ + #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ + #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ + ++/* 43224 chip-specific ChipControl register bits */ ++#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */ ++#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ ++#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ ++ ++/* 4313 Chip specific ChipControl register bits */ ++#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ ++ + /* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ +@@ -387,5 +433,6 @@ extern void bcma_chipco_chipctl_maskset( + u32 offset, u32 mask, u32 set); + extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); ++extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); + + #endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -53,11 +53,47 @@ struct pci_dev; -- 2.25.1