From bbe712494596cc4a7c317b73ffdf800f04641912 Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Fri, 1 May 2020 21:16:58 +0200 Subject: [PATCH] kirkwood: move led triggers to dts This patch moves led trigger settings from 01_leds file to dts. Now "linux,default-trigger" property is used. Tested-by: Alberto Bursi [nsa310,nsa325] Signed-off-by: Pawel Dembicki --- .../kirkwood/base-files/etc/board.d/01_leds | 10 -------- .../arch/arm/boot/dts/kirkwood-nsa310b.dts | 3 +++ .../kirkwood/patches-5.4/107-03-nsa325.patch | 25 ++++++++++++++++++- 3 files changed, 27 insertions(+), 11 deletions(-) diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds index bba845eae5..bbe689bbb5 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/01_leds +++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds @@ -16,16 +16,6 @@ case "$board" in "linksys,viper") ucidef_set_led_default "pulse" "pulse" "viper:white:pulse" "1" ;; -"zyxel,nsa310b") - ucidef_set_led_usbhost "usb" "USB" "nsa310:green:usb" - ucidef_set_led_ataport "hdd" "HDD" "nsa310:green:hdd" "1" - ucidef_set_led_ataport "esata" "eSata" "nsa310:green:esata" "2" - ;; -"zyxel,nsa325") - ucidef_set_led_usbhost "usb" "USB" "nsa325:green:usb" - ucidef_set_led_ataport "hdd1" "HDD1" "nsa325:green:hdd1" "1" - ucidef_set_led_ataport "hdd2" "HDD2" "nsa325:green:hdd2" "2" - ;; esac board_config_flush diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-nsa310b.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-nsa310b.dts index 10b119eb01..12e51d6656 100644 --- a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-nsa310b.dts +++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-nsa310b.dts @@ -101,6 +101,7 @@ green-hdd { label = "nsa310:green:hdd"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ata1"; }; red-hdd { @@ -111,6 +112,7 @@ green-esata { label = "nsa310:green:esata"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ata2"; }; red-esata { @@ -121,6 +123,7 @@ green-usb { label = "nsa310:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usb-host"; }; red-usb { diff --git a/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch b/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch index 36c77cd44a..374c0895a9 100644 --- a/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch +++ b/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch @@ -14,7 +14,7 @@ memory { device_type = "memory"; reg = <0x00000000 0x20000000>; -@@ -162,11 +169,12 @@ +@@ -162,17 +169,19 @@ &pmx_led_hdd1_green &pmx_led_hdd1_red>; pinctrl-names = "default"; @@ -29,3 +29,26 @@ label = "nsa325:orange:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; + green-hdd1 { + label = "nsa325:green:hdd1"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "ata1"; + }; + red-hdd1 { + label = "nsa325:red:hdd1"; +@@ -181,6 +190,7 @@ + green-hdd2 { + label = "nsa325:green:hdd2"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "ata2"; + }; + red-hdd2 { + label = "nsa325:red:hdd2"; +@@ -189,6 +199,7 @@ + green-usb { + label = "nsa325:green:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "usb-host"; + }; + green-copy { + label = "nsa325:green:copy"; -- 2.25.1