From b9dfb81f2aa45be745a8aed9684076210aed4152 Mon Sep 17 00:00:00 2001 From: Mirko Vogt Date: Fri, 12 Dec 2008 00:02:36 +0000 Subject: [PATCH] add support for target 3c24xx (more known as Openmoko GTA02 "Freerunner") and merge it with the openmoko-target and the work Michael Buesch did SVN-Revision: 13609 --- target/linux/openmoko/base-files/etc/inittab | 6 - .../linux/openmoko/base-files/etc/ipkg.conf | 3 - target/linux/openmoko/config-2.6.24 | 1762 - target/linux/openmoko/image/Makefile | 37 - .../openmoko/patches-2.6.24/100-moko.patch | 132055 --------------- target/linux/{openmoko => s3c24xx}/Makefile | 19 +- .../s3c24xx/base-files/etc/config/network | 14 + target/linux/s3c24xx/base-files/etc/inittab | 5 + target/linux/s3c24xx/base-files/etc/preinit | 78 + target/linux/s3c24xx/config-2.6.26 | 684 + target/linux/s3c24xx/image/Makefile | 35 + ...-reverse-openwrt-patches-921-922-923.patch | 1232 + ...-explicitly-link-notes-section.patch.patch | 29 + .../0002-gta01-no_nand_partitions.patch.patch | 60 + ...03-fix-i2c-s3c2410-resume-race.patch.patch | 106 + .../patches/0004-resume-timers-wq.patch.patch | 45 + .../patches/0005-s3c2410-bbt.patch.patch | 56 + .../patches/0006-gta01-pcf50606.patch.patch | 2443 + .../patches/0007-gta01-core.patch.patch | 831 + .../patches/0008-gta01-jbt6k74.patch.patch | 748 + .../0009-gta01-inputdevice.patch.patch | 298 + .../0010-gta01-power_control.patch.patch | 976 + .../patches/0011-s3c2410-pwm.patch.patch | 323 + .../patches/0012-gta01-vibrator.patch.patch | 244 + .../patches/0013-gta01-backlight.patch.patch | 308 + .../0014-s3c2410_touchscreen.patch.patch | 636 + .../patches/0015-s3c2410_ts-gta01.patch.patch | 53 + .../0016-i2c-permit_invalid_addrs.patch.patch | 33 + .../0017-g_ether-highpower.patch.patch | 34 + .../0018-g_ether-vendor_product.patch.patch | 44 + .../s3c24xx/patches/0019-s3c_mci.patch.patch | 1704 + .../patches/0020-s3c_mci-gta01.patch.patch | 97 + .../0021-s3c24xx-nand-largepage.patch.patch | 58 + ...dc-2440_dual_packet-workaround.patch.patch | 61 + .../patches/0023-s3c2442b-cpuid.patch.patch | 56 + .../s3c24xx/patches/0024-pcf50633.patch.patch | 2562 + .../0025-pcf50633-suspend-hacks.patch.patch | 45 + .../patches/0026-smedia-glamo.patch.patch | 3501 + .../patches/0027-glamo-mmc.patch.patch | 1188 + .../patches/0028-gta02-core.patch.patch | 1024 + .../0029-gta02-power_control.patch.patch | 586 + .../patches/0030-gta02-sound.patch.patch | 778 + .../s3c24xx/patches/0031-lis302dl.patch.patch | 781 + .../patches/0032-gta02-leds.patch.patch | 276 + .../patches/0033-gta02-acc.patch.patch | 1035 + .../s3c24xx/patches/0034-pcf506xx.patch.patch | 200 + .../patches/0035-gta02-bt-fixes.patch.patch | 209 + .../patches/0036-openmoko-logo.patch.patch | 40076 +++++ .../0037-config-nr-tty-devices.patch.patch | 60 + .../0038-pm-debug_less_verbose.patch.patch | 28 + .../0039-s3c2410_serial-nodebug.patch.patch | 40 + .../0040-input-nots-mousedev.patch.patch | 37 + ...041-s3c2440-nand-disable-hwecc.patch.patch | 28 + .../patches/0042-qt2410-cs8900.patch.patch | 74 + .../0043-s3c2410-qt2410-buttons.patch.patch | 311 + .../0044-fail-unless-uimage.patch.patch | 27 + .../0045-introduce-fiq-basis.patch.patch | 587 + ...oduce-fiq-use-timer3-as-source.patch.patch | 220 + ...iq-migrate-vibrator-gta02-only.patch.patch | 243 + .../s3c24xx/patches/0048-fiq-hdq.patch.patch | 606 + .../0049-bq27000-battery-driver.patch.patch | 510 + .../0050-fix-EVIOCGRAB-semantics.patch.patch | 95 + .../0051-s3c2410-usb-switch.patch.patch | 89 + .../patches/0052-pnp_fixes.patch.patch | 46 + .../0053-atheros_2_0_function.patch.patch | 33239 ++++ .../patches/0054-atheros_2_0_hcd.patch.patch | 1637 + .../0055-atheros_2_0_sdio_stack.patch.patch | 13982 ++ .../patches/0056-fix-hwecc-2410.patch.patch | 30 + ...-fix-pcf50606-LOWBAT-kill-init.patch.patch | 83 + ...-fix-pcf50633-LOWBAT-kill-init.patch.patch | 86 + .../0059-gta01-dehang-printk.patch.patch | 44 + .../patches/0060-suspend-prelim1.patch.patch | 98 + .../0061-gta02-sound-bandaid.patch.patch | 29 + .../0062-glamo-cmdqueue-bandaid.patch.patch | 81 + .../patches/0063-fix-wm8753-DBG.patch.patch | 26 + .../0064-local-add-defconfig.patch.patch | 1849 + .../0065-local-build-scripts.patch.patch | 53 + .../0066-local-build-new-dfu-vid.patch.patch | 31 + ...l-update-defconfig-for-2.6-dev.patch.patch | 1836 + ...al-config-add-vfat-nls-to-kern.patch.patch | 72 + ...onfig-add-bluetooth-monolithic.patch.patch | 44 + ...cal-config-wlan-config-changes.patch.patch | 155 + ...g-defconfig-motion-sensor-gpio.patch.patch | 36 + .../patches/0072-local-config-pmu.patch.patch | 34 + .../0073-local-config-ext2.patch.patch | 25 + ...ntrib-fix-chgstate-array-bloat.patch.patch | 52 + ...ix-deglitch-gpio-output-enable.patch.patch | 43 + .../0076-clean-snip-gpio-reinit.patch.patch | 31 + .../0077-introduce-fiq-hdq.patch.patch | 87 + ...troduce-bq27000-battery-driver.patch.patch | 73 + ...spend-dump-gpio-states-add-GPA.patch.patch | 452 + ...s3c2410_timer_setup-resume-BUG.patch.patch | 128 + .../patches/0081-config-add-alsa.patch.patch | 97 + ...-mci-defeat-ops-during-suspend.patch.patch | 73 + ...083-fix-lcm-reinit-post-resume.patch.patch | 286 + ...i-fake-reset-opcode-in-suspend.patch.patch | 141 + .../patches/0085-use-gpio-control-leds.patch | 51 + ...ix-gpio-led-patch-still-pwm-t3.patch.patch | 58 + ...troduce-usb-host-power-control.patch.patch | 167 + ...-deassert-host-power-1a-detect.patch.patch | 36 + .../0089-add-pcf50633-06-RTC_AIE-ioctl.patch | 71 + ...0090-fix-lis302dl-suspend-gpio.patch.patch | 122 + .../0091-fix-suspend-gps-tx-level.patch.patch | 47 + ...end-low-level-debugging-to-the-modem.patch | 50 + ...-add-gta02-pcb-revision-detect.patch.patch | 118 + .../0094-debug-glamo-dump-regs.patch.patch | 133 + .../0095-add-pcb-rev-sysfs.patch.patch | 150 + ...de-there-is-no-need-for-a-branch.-Th.patch | 63 + .../patches/0097-Remove-dead-code.patch | 25 + ...e-FIXME-store-the-GPIO-value-for-now.patch | 85 + ...driver-to-the-generic-GPIO-framework.patch | 85 + ...-for-the-s3c2410-and-add-irq_to_gpio.patch | 92 + ...d-not-gta01.-Do-not-call-the-vibrato.patch | 91 + ...0102-Fix-spelling.-flaoting-floating.patch | 26 + ...-of-Jack-Interrupts-after-resume-whe.patch | 121 + ...if-it-was-powered-on-before-suspendi.patch | 85 + .../patches/0105-fix-wlan-disable.patch.patch | 142 + .../patches/0106-defconfig-audio.patch.patch | 44 + ...gsm-download-irq-balance-issue.patch.patch | 64 + ...8-fix-glamofb-cmdqueue-timeout.patch.patch | 45 + ...9-fix-glamofb-cmd-mode-locking.patch.patch | 320 + ...bug-glamo-add-lcd-regs-to-dump.patch.patch | 55 + .../0111-fix-jack-debounce.patch.patch | 118 + .../patches/0112-OpenMoko-Openmoko.patch | 524 + ...ed-ifdef-as-machine_is_-is-always-de.patch | 61 + ...-enable-PWM-for-all-four-timers-disa.patch | 28 + ...5--led-Misc-fixes-in-the-driver-code.patch | 53 + ...th-GTA01_GPIO_MODEM_RST-GTA02_GPIO_M.patch | 43 + ...ess-to-GPIO-bank-B-has-to-go-through.patch | 497 + ...interrupt-debounce-loss-window.patch.patch | 82 + .../0119-fix-gta01-spi-resume-patch.patch | 44 + ...01-pmu-irq-edge-lost-on-resume.patch.patch | 38 + .../patches/0121-add-defconfig-2.6.25.patch | 1872 + ...5-input_dev-cdev-union-removed.patch.patch | 69 + ...struct-bus-type-loses-devices-member.patch | 56 + ...-upstream-s3c2410_gpio_irq2pin.patch.patch | 29 + ...-deprecated-includefile-wm8753.patch.patch | 27 + ...changed-s3c2410_dma_request-reurn.pa.patch | 44 + ...ps-power-state-resume-preserve.patch.patch | 34 + ...x-jbt-platform-missing-members.patch.patch | 84 + ...0129-gta01-fix-resume-redo-par.patch.patch | 32 + ...d8d971ee46ce7045fb7863f99a92a-Mon-Se.patch | 121 + .../0131-clean-sdio-hcd-suspend.patch.patch | 56 + .../0132-config-update-2.6.21-rc1.patch.patch | 461 + ...-rc1-remove-input-dev-private-member.patch | 83 + ...rc1-remove-dupe-s3c2410_nand_update_.patch | 52 + ...ng-2.6.26-rc1-sdio-pnp-changes.patch.patch | 111 + ...ix-KEY_PHONE-up-down-inversion.patch.patch | 29 + ...37-s3c24xx-pwm-platform-driver.patch.patch | 127 + ...pend-backlight-timing-pm-debug.patch.patch | 269 + ...9-fix-wep-needs-keys-before-ap.patch.patch | 72 + ...sume-caused-by-the-s3c2410-touch-scr.patch | 37 + ...1-fix-motion-sensor-corruption.patch.patch | 88 + .../0142-add-resume-reason-sysfs.patch.patch | 386 + ...educe-wake-reasons-in-pcf50633.patch.patch | 237 + .../0144-add-gta01-resume-sysfs.patch.patch | 115 + ...uce-samsung-camera-unit-driver.patch.patch | 5883 + ...46-uplevel-samsung-camera-unit.patch.patch | 1690 + ...move-unused-model-name-bq27000.patch.patch | 28 + ...l-pointer-dereference-in-s3c24xx_i2c.patch | 36 + ...k-not-print-soooo-much-to-my-console.patch | 30 + .../0150-Subject-PATCH-Build-fixes.patch | 127 + ...H-Hardware-glamo-fb-cursor-some-clea.patch | 280 + ...ubject-config-defconfig-2.6.26.patch.patch | 1898 + ...troduce-charging-led-behaviour.patch.patch | 423 + ...54-introduce-resume-dependency.patch.patch | 102 + ...cf50633-resume-dependency-list.patch.patch | 116 + ...f50633-resume-callback-jbt6k74.patch.patch | 438 + ...-a-minor-cleanup-of-backlight-resume.patch | 50 + ...g-codec-register-setting-sysfs.patch.patch | 67 + ...pend-resume-onehit-i2c-other-meddlin.patch | 204 + ...lationship-with-pcf50633-suspend-res.patch | 110 + ...ix-jbt6k74-force-reset-suspend.patch.patch | 28 + ...wer-setting-timeout-waiting-for-pcf5.patch | 46 + ...-resume-dependency-on-pcf50633.patch.patch | 162 + ...errupt-work-enforce-wait-on-resume-c.patch | 134 + ...-i2c-bulk-autoincrement-simplify.pat.patch | 224 + ...633-use-i2c-bulk-autoincrement.patch.patch | 230 + ...usb-curlim-workqueue-migration.patch.patch | 217 + ...e-lcm-keep-power-faster-resume.patch.patch | 94 + ...02-mach-remove-gta01-lcd-reset.patch.patch | 28 + ...d-remote-install-sdcard-script.patch.patch | 47 + ...uire-resume-level-3-for-irq-work.pat.patch | 26 + ...-back-gratuitous-isr-work-call-in-re.patch | 38 + ...l-white-splash-of-death-on-suspend.p.patch | 263 + ...-fix-allow-core-1v3-to-go-down.patch.patch | 27 + ...0-dump-stack-on-suspended-tranfer.pa.patch | 25 + ...pcf50633-suspend-state-as-enum.patch.patch | 197 + ...able-irq-from-suspend-until-resume.p.patch | 234 + ...ace-not-choke-on-null-dev_blah.patch.patch | 29 + ...ally-defer-backlight-on-resume.patch.patch | 71 + ...uspend-resume-dram-and-engines.patch.patch | 431 + ...atform-backlight-resume-ramp-setting.patch | 58 + ...-migrate-gta02-peripherals-out.patch.patch | 220 + ...-pcf-not-data-in-probe-for-context.p.patch | 219 + ...xx-i2s-stop-live-stream-stall-on-res.patch | 61 + ...CH-a6k-Everyone-calls-SET_NET_DEV-an.patch | 62 + ...H-glamo-Don-t-disable-hwcursor-for-b.patch | 191 + ...blink-led-not-using-userspace-omfg.p.patch | 62 + .../0188-touchscreen-meddling.patch.patch | 505 + ...fix-touchscreen-meddling-divde.patch.patch | 52 + ...ume-and-init-reload-boot-coefficient.patch | 168 + .../0191-fix-gsm-resume-problems.patch.patch | 138 + ...oduce-resume-exception-capture.patch.patch | 267 + ...-tracking-defconfig-2.6.26-rc7.patch.patch | 35 + ...rc7-repeat-cdev-removal-pcf50633.pat.patch | 25 + ...1cffe4dbc88d8ff667048ad28d925-Mon-Se.patch | 322 + ...fcd0a98a980a335ac4dc7ad95b221-Mon-Se.patch | 38 + ...5f6ba0ede73fa71973823726213a3-Mon-Se.patch | 54 + ...c713d2345a872fdf44f5dd3702e1b-Mon-Se.patch | 77 + ...1a75e0fd2cdf5e099e66121d10c0a-Mon-Se.patch | 136 + ...22daa451e26353140777223d397d2-Mon-Se.patch | 72 + ...move-kernel-charging-led-drive.patch.patch | 30 + .../0202-add-ar6k-wake-interrupt.patch.patch | 48 + ...its-of-nspy-GSM-flow-control-patches.patch | 27 + ...e24d361cd83178fe8da9d68efbf41a011483.patch | 37 + ...6ecbb0f7f2df7b7070092b87ddaf8-Mon-Se.patch | 47 + ...404d5f1185f0b3d6b5632381cb33f-Mon-Se.patch | 73 + ...pcf50633-mask-second-on-resume.patch.patch | 32 + ...208-fix-aux-key-level-by-gtaxx.patch.patch | 33 + ...50633-allow-force-charger-type.patch.patch | 69 + ...-fix-no-uart-leak-when-gps-off.patch.patch | 123 + ...-level-not-forced-up-on-resume.patch.patch | 90 + ...troduce-BANKCON-meddling-sysfs.patch.patch | 300 + ...ruptible-sleep-in-kthread-main-loops.patch | 64 + ...force-sdcard-clk-off-when-idle.patch.patch | 240 + ...5-add-limit-sdcard-clk-cmdline.patch.patch | 109 + .../0216-fix-scard-stop-on-resume.patch.patch | 51 + ...217-debug-move-dev-info-to-dbg.patch.patch | 170 + ...mo-drive-strength-module-param.patch.patch | 167 + ...bq27000-charger-state-tracking.patch.patch | 283 + ...-mci-set-default-drive-level-0.patch.patch | 35 + ...ove-charger-curlim-and-enable-apis-f.patch | 84 + ...y-do-platform-callback-once-per-even.patch | 74 + ...-mci-possible-timeout-overflow.patch.patch | 58 + ...sure-more-than-74-clocks-after-power.patch | 52 + .../0225-fix-pcf50633-bd-undef.patch.patch | 28 + .../patches/0226-fix-wm8753-DBG.patch.patch | 0 ...x-s3c2410-serial-fwd-ref.patch.patch.patch | 167 + ...ull-sd-voltage-range-selection.patch.patch | 74 + ...mci-dont-filter-voltage-change.patch.patch | 40 + ...ower-clocking-dynamic-switching.patc.patch | 120 + ...a02-glamo-mci-sd-dynamic-clock.patch.patch | 92 + ...e-pnp_alloc_dev-to-properly-initiali.patch | 264 + ...llow-the-creation-of-symlinks-on-sys.patch | 68 + .../0234-pcf50606-fix-gllin-compat-link.patch | 52 + .../0235-fix-add-missing-include.patch.patch | 21 + .../0236-config-kill-mtd-debug.patch.patch | 26 + ...fix-glamo-turbo-host-interface.patch.patch | 65 + ...ix-glamo-crank-memory-to-90MHz.patch.patch | 40 + .../patches/0239-fix-hdq-probe.patch.patch | 107 + ...0x-add-minimal-GSM-flowcontrol.patch.patch | 154 + ...a3d0c27c0c750b7bf1b56c002ee7943f3edc.patch | 33 + ...2-silence-serial-console-gta01.patch.patch | 76 + ...isable-irq-from-suspend-until-resume.patch | 287 + ...suspend-backlight-timing-gta01.patch.patch | 123 + ...gta01-uart-fifo-trigger-sooner.patch.patch | 38 + .../patches/0246-checkpatch-fixes.patch.patch | 106 + ...includes-from-checkpatch-fixes.patch.patch | 34 + ...x-pcf50633-usbrem-charging-led.patch.patch | 46 + .../0249-fix-no-discharging.patch.patch | 42 + ...or-paths-on-s3cmci_probe-was-doing-t.patch | 68 + ...kernel-was-crashing-within-mmc_power.patch | 108 + ...d-be-checking-for-a-negative-error-c.patch | 30 + ...ange-takes-jiffies-not-msecs.-Conver.patch | 29 + ...0254-config-2.6.26-add-s3c-mmc.patch.patch | 52 + .../profiles/100-gta02.mk | 0 target/linux/s3c24xx/todo.txt | 2 + 268 files changed, 151304 insertions(+), 133872 deletions(-) delete mode 100644 target/linux/openmoko/base-files/etc/inittab delete mode 100644 target/linux/openmoko/base-files/etc/ipkg.conf delete mode 100644 target/linux/openmoko/config-2.6.24 delete mode 100644 target/linux/openmoko/image/Makefile delete mode 100644 target/linux/openmoko/patches-2.6.24/100-moko.patch rename target/linux/{openmoko => s3c24xx}/Makefile (58%) mode change 100644 => 100755 create mode 100755 target/linux/s3c24xx/base-files/etc/config/network create mode 100755 target/linux/s3c24xx/base-files/etc/inittab create mode 100755 target/linux/s3c24xx/base-files/etc/preinit create mode 100755 target/linux/s3c24xx/config-2.6.26 create mode 100755 target/linux/s3c24xx/image/Makefile create mode 100755 target/linux/s3c24xx/patches/0000-reverse-openwrt-patches-921-922-923.patch create mode 100755 target/linux/s3c24xx/patches/0001-explicitly-link-notes-section.patch.patch create mode 100755 target/linux/s3c24xx/patches/0002-gta01-no_nand_partitions.patch.patch create mode 100755 target/linux/s3c24xx/patches/0003-fix-i2c-s3c2410-resume-race.patch.patch create mode 100755 target/linux/s3c24xx/patches/0004-resume-timers-wq.patch.patch create mode 100755 target/linux/s3c24xx/patches/0005-s3c2410-bbt.patch.patch create mode 100755 target/linux/s3c24xx/patches/0006-gta01-pcf50606.patch.patch create mode 100755 target/linux/s3c24xx/patches/0007-gta01-core.patch.patch create mode 100755 target/linux/s3c24xx/patches/0008-gta01-jbt6k74.patch.patch create mode 100755 target/linux/s3c24xx/patches/0009-gta01-inputdevice.patch.patch create mode 100755 target/linux/s3c24xx/patches/0010-gta01-power_control.patch.patch create mode 100755 target/linux/s3c24xx/patches/0011-s3c2410-pwm.patch.patch create mode 100755 target/linux/s3c24xx/patches/0012-gta01-vibrator.patch.patch create mode 100755 target/linux/s3c24xx/patches/0013-gta01-backlight.patch.patch create mode 100755 target/linux/s3c24xx/patches/0014-s3c2410_touchscreen.patch.patch create mode 100755 target/linux/s3c24xx/patches/0015-s3c2410_ts-gta01.patch.patch create mode 100755 target/linux/s3c24xx/patches/0016-i2c-permit_invalid_addrs.patch.patch create mode 100755 target/linux/s3c24xx/patches/0017-g_ether-highpower.patch.patch create mode 100755 target/linux/s3c24xx/patches/0018-g_ether-vendor_product.patch.patch create mode 100755 target/linux/s3c24xx/patches/0019-s3c_mci.patch.patch create mode 100755 target/linux/s3c24xx/patches/0020-s3c_mci-gta01.patch.patch create mode 100755 target/linux/s3c24xx/patches/0021-s3c24xx-nand-largepage.patch.patch create mode 100755 target/linux/s3c24xx/patches/0022-s3c2410_udc-2440_dual_packet-workaround.patch.patch create mode 100755 target/linux/s3c24xx/patches/0023-s3c2442b-cpuid.patch.patch create mode 100755 target/linux/s3c24xx/patches/0024-pcf50633.patch.patch create mode 100755 target/linux/s3c24xx/patches/0025-pcf50633-suspend-hacks.patch.patch create mode 100755 target/linux/s3c24xx/patches/0026-smedia-glamo.patch.patch create mode 100755 target/linux/s3c24xx/patches/0027-glamo-mmc.patch.patch create mode 100755 target/linux/s3c24xx/patches/0028-gta02-core.patch.patch create mode 100755 target/linux/s3c24xx/patches/0029-gta02-power_control.patch.patch create mode 100755 target/linux/s3c24xx/patches/0030-gta02-sound.patch.patch create mode 100755 target/linux/s3c24xx/patches/0031-lis302dl.patch.patch create mode 100755 target/linux/s3c24xx/patches/0032-gta02-leds.patch.patch create mode 100755 target/linux/s3c24xx/patches/0033-gta02-acc.patch.patch create mode 100755 target/linux/s3c24xx/patches/0034-pcf506xx.patch.patch create mode 100755 target/linux/s3c24xx/patches/0035-gta02-bt-fixes.patch.patch create mode 100755 target/linux/s3c24xx/patches/0036-openmoko-logo.patch.patch create mode 100755 target/linux/s3c24xx/patches/0037-config-nr-tty-devices.patch.patch create mode 100755 target/linux/s3c24xx/patches/0038-pm-debug_less_verbose.patch.patch create mode 100755 target/linux/s3c24xx/patches/0039-s3c2410_serial-nodebug.patch.patch create mode 100755 target/linux/s3c24xx/patches/0040-input-nots-mousedev.patch.patch create mode 100755 target/linux/s3c24xx/patches/0041-s3c2440-nand-disable-hwecc.patch.patch create mode 100755 target/linux/s3c24xx/patches/0042-qt2410-cs8900.patch.patch create mode 100755 target/linux/s3c24xx/patches/0043-s3c2410-qt2410-buttons.patch.patch create mode 100755 target/linux/s3c24xx/patches/0044-fail-unless-uimage.patch.patch create mode 100755 target/linux/s3c24xx/patches/0045-introduce-fiq-basis.patch.patch create mode 100755 target/linux/s3c24xx/patches/0046-introduce-fiq-use-timer3-as-source.patch.patch create mode 100755 target/linux/s3c24xx/patches/0047-introduce-fiq-migrate-vibrator-gta02-only.patch.patch create mode 100755 target/linux/s3c24xx/patches/0048-fiq-hdq.patch.patch create mode 100755 target/linux/s3c24xx/patches/0049-bq27000-battery-driver.patch.patch create mode 100755 target/linux/s3c24xx/patches/0050-fix-EVIOCGRAB-semantics.patch.patch create mode 100755 target/linux/s3c24xx/patches/0051-s3c2410-usb-switch.patch.patch create mode 100755 target/linux/s3c24xx/patches/0052-pnp_fixes.patch.patch create mode 100755 target/linux/s3c24xx/patches/0053-atheros_2_0_function.patch.patch create mode 100755 target/linux/s3c24xx/patches/0054-atheros_2_0_hcd.patch.patch create mode 100755 target/linux/s3c24xx/patches/0055-atheros_2_0_sdio_stack.patch.patch create mode 100755 target/linux/s3c24xx/patches/0056-fix-hwecc-2410.patch.patch create mode 100755 target/linux/s3c24xx/patches/0057-fix-pcf50606-LOWBAT-kill-init.patch.patch create mode 100755 target/linux/s3c24xx/patches/0058-fix-pcf50633-LOWBAT-kill-init.patch.patch create mode 100755 target/linux/s3c24xx/patches/0059-gta01-dehang-printk.patch.patch create mode 100755 target/linux/s3c24xx/patches/0060-suspend-prelim1.patch.patch create mode 100755 target/linux/s3c24xx/patches/0061-gta02-sound-bandaid.patch.patch create mode 100755 target/linux/s3c24xx/patches/0062-glamo-cmdqueue-bandaid.patch.patch create mode 100755 target/linux/s3c24xx/patches/0063-fix-wm8753-DBG.patch.patch create mode 100755 target/linux/s3c24xx/patches/0064-local-add-defconfig.patch.patch create mode 100755 target/linux/s3c24xx/patches/0065-local-build-scripts.patch.patch create mode 100755 target/linux/s3c24xx/patches/0066-local-build-new-dfu-vid.patch.patch create mode 100755 target/linux/s3c24xx/patches/0067-local-update-defconfig-for-2.6-dev.patch.patch create mode 100755 target/linux/s3c24xx/patches/0068-local-config-add-vfat-nls-to-kern.patch.patch create mode 100755 target/linux/s3c24xx/patches/0069-local-config-add-bluetooth-monolithic.patch.patch create mode 100755 target/linux/s3c24xx/patches/0070-local-config-wlan-config-changes.patch.patch create mode 100755 target/linux/s3c24xx/patches/0071-local-config-defconfig-motion-sensor-gpio.patch.patch create mode 100755 target/linux/s3c24xx/patches/0072-local-config-pmu.patch.patch create mode 100755 target/linux/s3c24xx/patches/0073-local-config-ext2.patch.patch create mode 100755 target/linux/s3c24xx/patches/0074-contrib-fix-chgstate-array-bloat.patch.patch create mode 100755 target/linux/s3c24xx/patches/0075-bugfix-deglitch-gpio-output-enable.patch.patch create mode 100755 target/linux/s3c24xx/patches/0076-clean-snip-gpio-reinit.patch.patch create mode 100755 target/linux/s3c24xx/patches/0077-introduce-fiq-hdq.patch.patch create mode 100755 target/linux/s3c24xx/patches/0078-introduce-bq27000-battery-driver.patch.patch create mode 100755 target/linux/s3c24xx/patches/0079-debug-suspend-dump-gpio-states-add-GPA.patch.patch create mode 100755 target/linux/s3c24xx/patches/0080-fix-s3c2410_timer_setup-resume-BUG.patch.patch create mode 100755 target/linux/s3c24xx/patches/0081-config-add-alsa.patch.patch create mode 100755 target/linux/s3c24xx/patches/0082-fix-glamo-mci-defeat-ops-during-suspend.patch.patch create mode 100755 target/linux/s3c24xx/patches/0083-fix-lcm-reinit-post-resume.patch.patch create mode 100755 target/linux/s3c24xx/patches/0084-fix-glamo-mci-fake-reset-opcode-in-suspend.patch.patch create mode 100755 target/linux/s3c24xx/patches/0085-use-gpio-control-leds.patch create mode 100755 target/linux/s3c24xx/patches/0086-fix-gpio-led-patch-still-pwm-t3.patch.patch create mode 100755 target/linux/s3c24xx/patches/0087-introduce-usb-host-power-control.patch.patch create mode 100755 target/linux/s3c24xx/patches/0088-fix-charging-deassert-host-power-1a-detect.patch.patch create mode 100755 target/linux/s3c24xx/patches/0089-add-pcf50633-06-RTC_AIE-ioctl.patch create mode 100755 target/linux/s3c24xx/patches/0090-fix-lis302dl-suspend-gpio.patch.patch create mode 100755 target/linux/s3c24xx/patches/0091-fix-suspend-gps-tx-level.patch.patch create mode 100755 target/linux/s3c24xx/patches/0092-Do-not-send-low-level-debugging-to-the-modem.patch create mode 100755 target/linux/s3c24xx/patches/0093-add-gta02-pcb-revision-detect.patch.patch create mode 100755 target/linux/s3c24xx/patches/0094-debug-glamo-dump-regs.patch.patch create mode 100755 target/linux/s3c24xx/patches/0095-add-pcb-rev-sysfs.patch.patch create mode 100755 target/linux/s3c24xx/patches/0096-Simplify-the-code-there-is-no-need-for-a-branch.-Th.patch create mode 100755 target/linux/s3c24xx/patches/0097-Remove-dead-code.patch create mode 100755 target/linux/s3c24xx/patches/0098-Fix-the-FIXME-store-the-GPIO-value-for-now.patch create mode 100755 target/linux/s3c24xx/patches/0099-Convert-the-driver-to-the-generic-GPIO-framework.patch create mode 100755 target/linux/s3c24xx/patches/0100-Add-GPIO-IRQ-for-the-s3c2410-and-add-irq_to_gpio.patch create mode 100755 target/linux/s3c24xx/patches/0101-This-is-gta02-and-not-gta01.-Do-not-call-the-vibrato.patch create mode 100755 target/linux/s3c24xx/patches/0102-Fix-spelling.-flaoting-floating.patch create mode 100755 target/linux/s3c24xx/patches/0103-Fix-the-firing-of-Jack-Interrupts-after-resume-whe.patch create mode 100755 target/linux/s3c24xx/patches/0104-Enable-GPS-only-if-it-was-powered-on-before-suspendi.patch create mode 100755 target/linux/s3c24xx/patches/0105-fix-wlan-disable.patch.patch create mode 100755 target/linux/s3c24xx/patches/0106-defconfig-audio.patch.patch create mode 100755 target/linux/s3c24xx/patches/0107-fix-gsm-download-irq-balance-issue.patch.patch create mode 100755 target/linux/s3c24xx/patches/0108-fix-glamofb-cmdqueue-timeout.patch.patch create mode 100755 target/linux/s3c24xx/patches/0109-fix-glamofb-cmd-mode-locking.patch.patch create mode 100755 target/linux/s3c24xx/patches/0110-debug-glamo-add-lcd-regs-to-dump.patch.patch create mode 100755 target/linux/s3c24xx/patches/0111-fix-jack-debounce.patch.patch create mode 100755 target/linux/s3c24xx/patches/0112-OpenMoko-Openmoko.patch create mode 100755 target/linux/s3c24xx/patches/0113-Remove-not-needed-ifdef-as-machine_is_-is-always-de.patch create mode 100755 target/linux/s3c24xx/patches/0114--leds-We-would-enable-PWM-for-all-four-timers-disa.patch create mode 100755 target/linux/s3c24xx/patches/0115--led-Misc-fixes-in-the-driver-code.patch create mode 100755 target/linux/s3c24xx/patches/0116--neo-bluetooth-GTA01_GPIO_MODEM_RST-GTA02_GPIO_M.patch create mode 100755 target/linux/s3c24xx/patches/0117--neo-Every-access-to-GPIO-bank-B-has-to-go-through.patch create mode 100755 target/linux/s3c24xx/patches/0118-fix-jack-interrupt-debounce-loss-window.patch.patch create mode 100755 target/linux/s3c24xx/patches/0119-fix-gta01-spi-resume-patch.patch create mode 100755 target/linux/s3c24xx/patches/0120-fix-gta01-pmu-irq-edge-lost-on-resume.patch.patch create mode 100755 target/linux/s3c24xx/patches/0121-add-defconfig-2.6.25.patch create mode 100755 target/linux/s3c24xx/patches/0122-tracking-2.6.25-input_dev-cdev-union-removed.patch.patch create mode 100755 target/linux/s3c24xx/patches/0123-tracking-2.6.25-struct-bus-type-loses-devices-member.patch create mode 100755 target/linux/s3c24xx/patches/0124-tracking-2.6.25-upstream-s3c2410_gpio_irq2pin.patch.patch create mode 100755 target/linux/s3c24xx/patches/0125-tracking-2.6.25-deprecated-includefile-wm8753.patch.patch create mode 100755 target/linux/s3c24xx/patches/0126-tracking-2.6.25-changed-s3c2410_dma_request-reurn.pa.patch create mode 100755 target/linux/s3c24xx/patches/0127-gta01-gps-power-state-resume-preserve.patch.patch create mode 100755 target/linux/s3c24xx/patches/0128-gta01-fix-jbt-platform-missing-members.patch.patch create mode 100755 target/linux/s3c24xx/patches/0129-gta01-fix-resume-redo-par.patch.patch create mode 100755 target/linux/s3c24xx/patches/0130-From-cc08b5986dfd8d971ee46ce7045fb7863f99a92a-Mon-Se.patch create mode 100755 target/linux/s3c24xx/patches/0131-clean-sdio-hcd-suspend.patch.patch create mode 100755 target/linux/s3c24xx/patches/0132-config-update-2.6.21-rc1.patch.patch create mode 100755 target/linux/s3c24xx/patches/0133-tracking-2.6.26-rc1-remove-input-dev-private-member.patch create mode 100755 target/linux/s3c24xx/patches/0134-tracking-2.6.26-rc1-remove-dupe-s3c2410_nand_update_.patch create mode 100755 target/linux/s3c24xx/patches/0135-tracking-2.6.26-rc1-sdio-pnp-changes.patch.patch create mode 100755 target/linux/s3c24xx/patches/0136-fix-KEY_PHONE-up-down-inversion.patch.patch create mode 100755 target/linux/s3c24xx/patches/0137-s3c24xx-pwm-platform-driver.patch.patch create mode 100755 target/linux/s3c24xx/patches/0138-fix-suspend-backlight-timing-pm-debug.patch.patch create mode 100755 target/linux/s3c24xx/patches/0139-fix-wep-needs-keys-before-ap.patch.patch create mode 100755 target/linux/s3c24xx/patches/0140-Fixup-hang-on-resume-caused-by-the-s3c2410-touch-scr.patch create mode 100755 target/linux/s3c24xx/patches/0141-fix-motion-sensor-corruption.patch.patch create mode 100755 target/linux/s3c24xx/patches/0142-add-resume-reason-sysfs.patch.patch create mode 100755 target/linux/s3c24xx/patches/0143-fix-reduce-wake-reasons-in-pcf50633.patch.patch create mode 100755 target/linux/s3c24xx/patches/0144-add-gta01-resume-sysfs.patch.patch create mode 100755 target/linux/s3c24xx/patches/0145-introduce-samsung-camera-unit-driver.patch.patch create mode 100755 target/linux/s3c24xx/patches/0146-uplevel-samsung-camera-unit.patch.patch create mode 100755 target/linux/s3c24xx/patches/0147-fix-remove-unused-model-name-bq27000.patch.patch create mode 100755 target/linux/s3c24xx/patches/0148-Fix-possible-null-pointer-dereference-in-s3c24xx_i2c.patch create mode 100755 target/linux/s3c24xx/patches/0149-Make-ar6k-not-print-soooo-much-to-my-console.patch create mode 100755 target/linux/s3c24xx/patches/0150-Subject-PATCH-Build-fixes.patch create mode 100755 target/linux/s3c24xx/patches/0151-Subject-PATCH-Hardware-glamo-fb-cursor-some-clea.patch create mode 100755 target/linux/s3c24xx/patches/0152-Subject-config-defconfig-2.6.26.patch.patch create mode 100755 target/linux/s3c24xx/patches/0153-introduce-charging-led-behaviour.patch.patch create mode 100755 target/linux/s3c24xx/patches/0154-introduce-resume-dependency.patch.patch create mode 100755 target/linux/s3c24xx/patches/0155-introduce-pcf50633-resume-dependency-list.patch.patch create mode 100755 target/linux/s3c24xx/patches/0156-add-use-pcf50633-resume-callback-jbt6k74.patch.patch create mode 100755 target/linux/s3c24xx/patches/0157-The-following-is-a-minor-cleanup-of-backlight-resume.patch create mode 100755 target/linux/s3c24xx/patches/0158-debug-codec-register-setting-sysfs.patch.patch create mode 100755 target/linux/s3c24xx/patches/0159-fix-pcf50633-suspend-resume-onehit-i2c-other-meddlin.patch create mode 100755 target/linux/s3c24xx/patches/0160-fix-glamo-mci-relationship-with-pcf50633-suspend-res.patch create mode 100755 target/linux/s3c24xx/patches/0161-fix-jbt6k74-force-reset-suspend.patch.patch create mode 100755 target/linux/s3c24xx/patches/0162-fix-glamo-mci-power-setting-timeout-waiting-for-pcf5.patch create mode 100755 target/linux/s3c24xx/patches/0163-fix-glamo-mci-resume-dependency-on-pcf50633.patch.patch create mode 100755 target/linux/s3c24xx/patches/0164-fix-pcf50633-interrupt-work-enforce-wait-on-resume-c.patch create mode 100755 target/linux/s3c24xx/patches/0165-fix-pcf50633-rtc-i2c-bulk-autoincrement-simplify.pat.patch create mode 100755 target/linux/s3c24xx/patches/0166-fix-pcf50633-use-i2c-bulk-autoincrement.patch.patch create mode 100755 target/linux/s3c24xx/patches/0167-fix-pcf50633-usb-curlim-workqueue-migration.patch.patch create mode 100755 target/linux/s3c24xx/patches/0168-change-lcm-keep-power-faster-resume.patch.patch create mode 100755 target/linux/s3c24xx/patches/0169-fix-gta02-mach-remove-gta01-lcd-reset.patch.patch create mode 100755 target/linux/s3c24xx/patches/0170-add-remote-install-sdcard-script.patch.patch create mode 100755 target/linux/s3c24xx/patches/0171-fix-pcf50633-require-resume-level-3-for-irq-work.pat.patch create mode 100755 target/linux/s3c24xx/patches/0172-fix-pcf50633-add-back-gratuitous-isr-work-call-in-re.patch create mode 100755 target/linux/s3c24xx/patches/0173-fix-pcf50633-kill-white-splash-of-death-on-suspend.p.patch create mode 100755 target/linux/s3c24xx/patches/0174-fix-allow-core-1v3-to-go-down.patch.patch create mode 100755 target/linux/s3c24xx/patches/0175-debug-i2c-s3c2410-dump-stack-on-suspended-tranfer.pa.patch create mode 100755 target/linux/s3c24xx/patches/0176-fix-pcf50633-suspend-state-as-enum.patch.patch create mode 100755 target/linux/s3c24xx/patches/0177-fix-pcf50633-disable-irq-from-suspend-until-resume.p.patch create mode 100755 target/linux/s3c24xx/patches/0178-debug-backtrace-not-choke-on-null-dev_blah.patch.patch create mode 100755 target/linux/s3c24xx/patches/0179-fix-pcf50633-really-defer-backlight-on-resume.patch.patch create mode 100755 target/linux/s3c24xx/patches/0180-fix-glamo-suspend-resume-dram-and-engines.patch.patch create mode 100755 target/linux/s3c24xx/patches/0181-fix-pcf50633-platform-backlight-resume-ramp-setting.patch create mode 100755 target/linux/s3c24xx/patches/0182-fix-pcf50633-migrate-gta02-peripherals-out.patch.patch create mode 100755 target/linux/s3c24xx/patches/0183-fix-pcf50633-use-pcf-not-data-in-probe-for-context.p.patch create mode 100755 target/linux/s3c24xx/patches/0184-workaround-s3c24xx-i2s-stop-live-stream-stall-on-res.patch create mode 100755 target/linux/s3c24xx/patches/0185-Subject-PATCH-a6k-Everyone-calls-SET_NET_DEV-an.patch create mode 100755 target/linux/s3c24xx/patches/0186-Subject-PATCH-glamo-Don-t-disable-hwcursor-for-b.patch create mode 100755 target/linux/s3c24xx/patches/0187-introduce-panic-blink-led-not-using-userspace-omfg.p.patch create mode 100755 target/linux/s3c24xx/patches/0188-touchscreen-meddling.patch.patch create mode 100755 target/linux/s3c24xx/patches/0189-fix-touchscreen-meddling-divde.patch.patch create mode 100755 target/linux/s3c24xx/patches/0190-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch create mode 100755 target/linux/s3c24xx/patches/0191-fix-gsm-resume-problems.patch.patch create mode 100755 target/linux/s3c24xx/patches/0192-introduce-resume-exception-capture.patch.patch create mode 100755 target/linux/s3c24xx/patches/0193-tracking-defconfig-2.6.26-rc7.patch.patch create mode 100755 target/linux/s3c24xx/patches/0194-tracking-2.6.26-rc7-repeat-cdev-removal-pcf50633.pat.patch create mode 100755 target/linux/s3c24xx/patches/0195-From-119f4e02ba81cffe4dbc88d8ff667048ad28d925-Mon-Se.patch create mode 100755 target/linux/s3c24xx/patches/0196-From-ae3f72fc608fcd0a98a980a335ac4dc7ad95b221-Mon-Se.patch create mode 100755 target/linux/s3c24xx/patches/0197-From-683ef8067815f6ba0ede73fa71973823726213a3-Mon-Se.patch create mode 100755 target/linux/s3c24xx/patches/0198-From-000450f1ad2c713d2345a872fdf44f5dd3702e1b-Mon-Se.patch create mode 100755 target/linux/s3c24xx/patches/0199-From-5718bde77ed1a75e0fd2cdf5e099e66121d10c0a-Mon-Se.patch create mode 100755 target/linux/s3c24xx/patches/0200-From-c221bb27c8e22daa451e26353140777223d397d2-Mon-Se.patch create mode 100755 target/linux/s3c24xx/patches/0201-change-remove-kernel-charging-led-drive.patch.patch create mode 100755 target/linux/s3c24xx/patches/0202-add-ar6k-wake-interrupt.patch.patch create mode 100755 target/linux/s3c24xx/patches/0203-Remove-some-bits-of-nspy-GSM-flow-control-patches.patch create mode 100755 target/linux/s3c24xx/patches/0204-commit-5f42e24d361cd83178fe8da9d68efbf41a011483.patch create mode 100755 target/linux/s3c24xx/patches/0205-From-cede5c6c9b06ecbb0f7f2df7b7070092b87ddaf8-Mon-Se.patch create mode 100755 target/linux/s3c24xx/patches/0206-From-3a32be40f78404d5f1185f0b3d6b5632381cb33f-Mon-Se.patch create mode 100755 target/linux/s3c24xx/patches/0207-fix-pcf50633-mask-second-on-resume.patch.patch create mode 100755 target/linux/s3c24xx/patches/0208-fix-aux-key-level-by-gtaxx.patch.patch create mode 100755 target/linux/s3c24xx/patches/0209-add-pcf50633-allow-force-charger-type.patch.patch create mode 100755 target/linux/s3c24xx/patches/0210-fix-no-uart-leak-when-gps-off.patch.patch create mode 100755 target/linux/s3c24xx/patches/0211-change-backlight-level-not-forced-up-on-resume.patch.patch create mode 100755 target/linux/s3c24xx/patches/0212-introduce-BANKCON-meddling-sysfs.patch.patch create mode 100755 target/linux/s3c24xx/patches/0213-sdio-use-interruptible-sleep-in-kthread-main-loops.patch create mode 100755 target/linux/s3c24xx/patches/0214-fix-force-sdcard-clk-off-when-idle.patch.patch create mode 100755 target/linux/s3c24xx/patches/0215-add-limit-sdcard-clk-cmdline.patch.patch create mode 100755 target/linux/s3c24xx/patches/0216-fix-scard-stop-on-resume.patch.patch create mode 100755 target/linux/s3c24xx/patches/0217-debug-move-dev-info-to-dbg.patch.patch create mode 100755 target/linux/s3c24xx/patches/0218-debug-add-glamo-drive-strength-module-param.patch.patch create mode 100755 target/linux/s3c24xx/patches/0219-fix-bq27000-charger-state-tracking.patch.patch create mode 100755 target/linux/s3c24xx/patches/0220-fix-glamo-mci-set-default-drive-level-0.patch.patch create mode 100755 target/linux/s3c24xx/patches/0221-fix-pcf50633-remove-charger-curlim-and-enable-apis-f.patch create mode 100755 target/linux/s3c24xx/patches/0222-fix-pcf50633-only-do-platform-callback-once-per-even.patch create mode 100755 target/linux/s3c24xx/patches/0223-fix-glamo-mci-possible-timeout-overflow.patch.patch create mode 100755 target/linux/s3c24xx/patches/0224-fix-glamo-mci-ensure-more-than-74-clocks-after-power.patch create mode 100755 target/linux/s3c24xx/patches/0225-fix-pcf50633-bd-undef.patch.patch create mode 100755 target/linux/s3c24xx/patches/0226-fix-wm8753-DBG.patch.patch create mode 100755 target/linux/s3c24xx/patches/0227-fix-s3c2410-serial-fwd-ref.patch.patch.patch create mode 100755 target/linux/s3c24xx/patches/0228-fix-allow-full-sd-voltage-range-selection.patch.patch create mode 100755 target/linux/s3c24xx/patches/0229-fix-glamo-mci-dont-filter-voltage-change.patch.patch create mode 100755 target/linux/s3c24xx/patches/0230-add-glamo-mci-slower-clocking-dynamic-switching.patc.patch create mode 100755 target/linux/s3c24xx/patches/0231-use-gta02-glamo-mci-sd-dynamic-clock.patch.patch create mode 100755 target/linux/s3c24xx/patches/0232-0003-a6k-sdio-Use-pnp_alloc_dev-to-properly-initiali.patch create mode 100755 target/linux/s3c24xx/patches/0233-device-model-Allow-the-creation-of-symlinks-on-sys.patch create mode 100755 target/linux/s3c24xx/patches/0234-pcf50606-fix-gllin-compat-link.patch create mode 100755 target/linux/s3c24xx/patches/0235-fix-add-missing-include.patch.patch create mode 100755 target/linux/s3c24xx/patches/0236-config-kill-mtd-debug.patch.patch create mode 100755 target/linux/s3c24xx/patches/0237-fix-glamo-turbo-host-interface.patch.patch create mode 100755 target/linux/s3c24xx/patches/0238-fix-glamo-crank-memory-to-90MHz.patch.patch create mode 100755 target/linux/s3c24xx/patches/0239-fix-hdq-probe.patch.patch create mode 100755 target/linux/s3c24xx/patches/0240-gta0x-add-minimal-GSM-flowcontrol.patch.patch create mode 100755 target/linux/s3c24xx/patches/0241-commit-830ea3d0c27c0c750b7bf1b56c002ee7943f3edc.patch create mode 100755 target/linux/s3c24xx/patches/0242-silence-serial-console-gta01.patch.patch create mode 100755 target/linux/s3c24xx/patches/0243-gta01-pcf50606-disable-irq-from-suspend-until-resume.patch create mode 100755 target/linux/s3c24xx/patches/0244-fix-suspend-backlight-timing-gta01.patch.patch create mode 100755 target/linux/s3c24xx/patches/0245-gta01-uart-fifo-trigger-sooner.patch.patch create mode 100755 target/linux/s3c24xx/patches/0246-checkpatch-fixes.patch.patch create mode 100755 target/linux/s3c24xx/patches/0247-add-includes-from-checkpatch-fixes.patch.patch create mode 100755 target/linux/s3c24xx/patches/0248-fix-pcf50633-usbrem-charging-led.patch.patch create mode 100755 target/linux/s3c24xx/patches/0249-fix-no-discharging.patch.patch create mode 100755 target/linux/s3c24xx/patches/0250-One-of-the-error-paths-on-s3cmci_probe-was-doing-t.patch create mode 100755 target/linux/s3c24xx/patches/0251-My-GTA01-2.6.26-kernel-was-crashing-within-mmc_power.patch create mode 100755 target/linux/s3c24xx/patches/0252-The-driver-should-be-checking-for-a-negative-error-c.patch create mode 100755 target/linux/s3c24xx/patches/0253-mmc_detect_change-takes-jiffies-not-msecs.-Conver.patch create mode 100755 target/linux/s3c24xx/patches/0254-config-2.6.26-add-s3c-mmc.patch.patch rename target/linux/{openmoko => s3c24xx}/profiles/100-gta02.mk (100%) create mode 100644 target/linux/s3c24xx/todo.txt diff --git a/target/linux/openmoko/base-files/etc/inittab b/target/linux/openmoko/base-files/etc/inittab deleted file mode 100644 index a627ce5ffa..0000000000 --- a/target/linux/openmoko/base-files/etc/inittab +++ /dev/null @@ -1,6 +0,0 @@ -::sysinit:/etc/init.d/rcS S boot -::shutdown:/etc/init.d/rcS K stop -tts/0::askfirst:/bin/ash --login -ttyS0::askfirst:/bin/ash --login - -ttyS2::respawn:/sbin/getty -L ttyS2 115200 vt100 diff --git a/target/linux/openmoko/base-files/etc/ipkg.conf b/target/linux/openmoko/base-files/etc/ipkg.conf deleted file mode 100644 index 10c4f67c66..0000000000 --- a/target/linux/openmoko/base-files/etc/ipkg.conf +++ /dev/null @@ -1,3 +0,0 @@ -src snapshots http://vlink.guthrie.homedns.org/vlink3 -dest root / -dest ram /tmp diff --git a/target/linux/openmoko/config-2.6.24 b/target/linux/openmoko/config-2.6.24 deleted file mode 100644 index 98299ce034..0000000000 --- a/target/linux/openmoko/config-2.6.24 +++ /dev/null @@ -1,1762 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Sun Dec 7 22:06:07 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set -CONFIG_MMU=y -CONFIG_NO_IOPORT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_FIQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -# CONFIG_EMBEDDED is not set -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=m -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=m -# CONFIG_DEFAULT_AS is not set -CONFIG_DEFAULT_DEADLINE=y -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="deadline" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -CONFIG_ARCH_S3C2410=y -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -CONFIG_PLAT_S3C24XX=y -CONFIG_CPU_S3C244X=y -CONFIG_S3C2410_DMA=y -# CONFIG_S3C2410_DMA_DEBUG is not set -CONFIG_MACH_SMDK=y -CONFIG_MACH_NEO1973=y -CONFIG_PLAT_S3C=y -CONFIG_CPU_LLSERIAL_S3C2410=y -CONFIG_CPU_LLSERIAL_S3C2440=y - -# -# Boot options -# -# CONFIG_S3C_BOOT_WATCHDOG is not set -# CONFIG_S3C_BOOT_ERROR_RESET is not set - -# -# Power management -# -# CONFIG_S3C2410_PM_CHECK is not set -CONFIG_S3C_LOWLEVEL_UART_PORT=2 - -# -# S3C2400 Machines -# -CONFIG_CPU_S3C2410=y -CONFIG_CPU_S3C2410_DMA=y -CONFIG_S3C2410_PM=y -CONFIG_S3C2410_GPIO=y -CONFIG_S3C2410_CLOCK=y -CONFIG_S3C2410_PWM=y - -# -# S3C2410 Machines -# -# CONFIG_ARCH_SMDK2410 is not set -# CONFIG_ARCH_H1940 is not set -# CONFIG_MACH_N30 is not set -# CONFIG_ARCH_BAST is not set -# CONFIG_MACH_OTOM is not set -# CONFIG_MACH_AML_M5900 is not set -# CONFIG_MACH_VR1000 is not set -CONFIG_MACH_QT2410=y -CONFIG_MACH_NEO1973_GTA01=y - -# -# S3C2412 Machines -# -# CONFIG_MACH_SMDK2413 is not set -# CONFIG_MACH_SMDK2412 is not set -# CONFIG_MACH_VSTMS is not set -CONFIG_CPU_S3C2440=y -CONFIG_S3C2440_DMA=y -CONFIG_S3C2440_C_FIQ=y - -# -# S3C2440 Machines -# -# CONFIG_MACH_ANUBIS is not set -# CONFIG_MACH_OSIRIS is not set -# CONFIG_MACH_RX3715 is not set -CONFIG_ARCH_S3C2440=y -# CONFIG_MACH_NEXCODER_2440 is not set -CONFIG_SMDK2440_CPU2440=y -CONFIG_MACH_HXD8=y -CONFIG_MACH_NEO1973_GTA02=y -# CONFIG_NEO1973_GTA02_2440 is not set -# CONFIG_MACH_M800 is not set -CONFIG_CPU_S3C2442=y - -# -# S3C2442 Machines -# -CONFIG_SMDK2440_CPU2442=y - -# -# S3C2443 Machines -# -# CONFIG_MACH_SMDK2443 is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4T=y -CONFIG_CPU_ABRT_EV4T=y -CONFIG_CPU_CACHE_V4WT=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y -CONFIG_HZ=200 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="unused -- bootloader passes ATAG list debug " -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -CONFIG_PM=y -CONFIG_PM_LEGACY=y -CONFIG_PM_DEBUG=y -# CONFIG_PM_VERBOSE is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -# CONFIG_IP_ROUTE_MULTIPATH is not set -# CONFIG_IP_ROUTE_VERBOSE is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -# CONFIG_NET_IPGRE_BROADCAST is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -# CONFIG_NF_CT_PROTO_UDPLITE is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_RECENT is not set -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m -# CONFIG_NF_NAT_AMANDA is not set -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_NF_NAT_SIP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_NF_CONNTRACK_IPV6=m -# CONFIG_IP6_NF_QUEUE is not set -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m -# CONFIG_IP6_NF_RAW is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_PRIO=m -# CONFIG_NET_SCH_RR is not set -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_INGRESS=m - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_POLICE is not set -# CONFIG_NET_CLS_IND is not set -CONFIG_NET_SCH_FIFO=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -# CONFIG_BT_HCIBTSDIO is not set -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -# CONFIG_AF_RXRPC is not set -CONFIG_FIB_RULES=y - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -CONFIG_CONNECTOR=m -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -CONFIG_MTD_ABSENT=y - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_S3C2410=y -# CONFIG_MTD_NAND_S3C2410_DEBUG is not set -CONFIG_MTD_NAND_S3C2410_HWECC=y -# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_PNP=y -CONFIG_PNP_DEBUG=y - -# -# Protocols -# -# CONFIG_PNPACPI is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_UB=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_NET_SB1000 is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -CONFIG_NET_PCI=y -# CONFIG_B44 is not set -CONFIG_CS89x0=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=y -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -# CONFIG_WAN is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_NEO1973=y -CONFIG_KEYBOARD_QT2410=y -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set -# CONFIG_TOUCHSCREEN_FUJITSU is not set -CONFIG_TOUCHSCREEN_S3C2410=y -# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m -CONFIG_INPUT_LIS302DL=y - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_NR_TTY_DEVICES=4 -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_S3C2410=y -CONFIG_SERIAL_S3C2410_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -CONFIG_I2C_S3C2410=y -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -CONFIG_SENSORS_PCF50606=y -CONFIG_SENSORS_PCF50633=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -CONFIG_SENSORS_TSL256X=m -# CONFIG_PCA9632 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_BITBANG=y -CONFIG_SPI_S3C24XX=y -CONFIG_SPI_S3C24XX_GPIO=y - -# -# SPI Protocol Masters -# -# CONFIG_SPI_AT25 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_W1 is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -CONFIG_APM_POWER=y -# CONFIG_BATTERY_DS2760 is not set -CONFIG_BATTERY_BQ27000_HDQ=y -CONFIG_GTA02_HDQ=y -# CONFIG_BATTERY_GTA01 is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_S3C2410_WATCHDOG=m - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -CONFIG_MFD_GLAMO=y -CONFIG_MFD_GLAMO_FB=y -CONFIG_MFD_GLAMO_SPI_GPIO=y -CONFIG_MFD_GLAMO_SPI_FB=y -CONFIG_MFD_GLAMO_MCI=y - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_UVESA is not set -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_S3C2410=y -# CONFIG_FB_S3C2410_DEBUG is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -# CONFIG_LCD_LTV350QV is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set -CONFIG_BACKLIGHT_GTA01=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -CONFIG_DISPLAY_JBT6K74=y - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -# CONFIG_FONT_8x16 is not set -CONFIG_FONT_6x11=y -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_LOGO is not set - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_RAWMIDI=m -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# - -# -# SPI devices -# - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_S3C24XX_SOC=m -CONFIG_SND_S3C24XX_SOC_I2S=m -CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=m -# CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753_DEBUG is not set -CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=m - -# -# SoC Audio support for SuperH -# -CONFIG_SND_SOC_WM8753=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -# CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_STORAGE_ALAUDA=y -CONFIG_USB_STORAGE_KARMA=y -CONFIG_USB_LIBUSUAL=y - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_AIRPRIME=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP2101=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_FUNSOFT=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -CONFIG_USB_SERIAL_HP4X=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -CONFIG_USB_BERRY_CHARGE=m -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -CONFIG_USB_GADGET_S3C2410=y -CONFIG_USB_S3C2410=y -# CONFIG_USB_S3C2410_DEBUG is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m - -# -# SDIO support -# -CONFIG_SDIO=y -CONFIG_SDIO_S3C24XX=y -CONFIG_SDIO_S3C24XX_DMA=y -CONFIG_SDIO_AR6000_WLAN=y -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set - -# -# MMC/SD Host Controller Drivers -# -# CONFIG_MMC_SPI is not set -CONFIG_MMC_S3C=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_S3C24XX=m -# CONFIG_LEDS_GPIO is not set -CONFIG_LEDS_NEO1973_VIBRATOR=y -CONFIG_LEDS_NEO1973_GTA02=y - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_DEBUG=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_S3C=m - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_WEAK_PW_HASH=y -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set -CONFIG_DEBUG_S3C_UART=2 - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -CONFIG_CRYPTO_HW=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_DMA=y diff --git a/target/linux/openmoko/image/Makefile b/target/linux/openmoko/image/Makefile deleted file mode 100644 index 34ca44b701..0000000000 --- a/target/linux/openmoko/image/Makefile +++ /dev/null @@ -1,37 +0,0 @@ -# -# Copyright (C) 2008 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -JFFS2_BLOCKSIZE := 128k - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Image/mkfs/jffs2/sub - $(STAGING_DIR_HOST)/bin/mkfs.jffs2 --pad --little-endian --pagesize=0x800 --no-cleanmarkers -e $(patsubst %k,%KiB,$(1)) -o $(KDIR)/root.jffs2-$(1) -d $(TARGET_DIR) - $(call add_jffs2_mark,$(KDIR)/root.jffs2-$(1)) - $(call Image/Build,jffs2-$(1)) -endef - -define Build/Clean -endef - -define Build/Compile -endef - -define Image/Prepare - cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage -endef - -define Image/BuildKernel - cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-uImage -endef - -define Image/Build - cp $(KDIR)/root.jffs2-128k $(BIN_DIR)/openwrt-$(BOARD)-rootfs -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/openmoko/patches-2.6.24/100-moko.patch b/target/linux/openmoko/patches-2.6.24/100-moko.patch deleted file mode 100644 index fea607af7c..0000000000 --- a/target/linux/openmoko/patches-2.6.24/100-moko.patch +++ /dev/null @@ -1,132055 +0,0 @@ -Index: linux-2.6.24.7/arch/arm/configs/glofiish_defconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/configs/glofiish_defconfig 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,1728 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.24 -+# Wed Nov 12 00:27:24 2008 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+CONFIG_NO_IOPORT=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_LOCK_KERNEL=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_FAIR_GROUP_SCHED is not set -+# CONFIG_SYSFS_DEPRECATED is not set -+# CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=m -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=m -+# CONFIG_DEFAULT_AS is not set -+CONFIG_DEFAULT_DEADLINE=y -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="deadline" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_AT91 is not set -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+CONFIG_ARCH_S3C2410=y -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+CONFIG_PLAT_S3C24XX=y -+CONFIG_CPU_S3C244X=y -+CONFIG_S3C2410_DMA=y -+# CONFIG_S3C2410_DMA_DEBUG is not set -+CONFIG_MACH_SMDK=y -+CONFIG_PLAT_S3C=y -+CONFIG_CPU_LLSERIAL_S3C2410=y -+CONFIG_CPU_LLSERIAL_S3C2440=y -+ -+# -+# Boot options -+# -+# CONFIG_S3C_BOOT_WATCHDOG is not set -+# CONFIG_S3C_BOOT_ERROR_RESET is not set -+ -+# -+# Power management -+# -+# CONFIG_S3C2410_PM_CHECK is not set -+CONFIG_S3C_LOWLEVEL_UART_PORT=2 -+ -+# -+# S3C2400 Machines -+# -+CONFIG_CPU_S3C2410=y -+CONFIG_CPU_S3C2410_DMA=y -+CONFIG_S3C2410_PM=y -+CONFIG_S3C2410_GPIO=y -+CONFIG_S3C2410_CLOCK=y -+CONFIG_S3C2410_PWM=y -+ -+# -+# S3C2410 Machines -+# -+# CONFIG_ARCH_SMDK2410 is not set -+# CONFIG_ARCH_H1940 is not set -+# CONFIG_MACH_N30 is not set -+# CONFIG_ARCH_BAST is not set -+# CONFIG_MACH_OTOM is not set -+# CONFIG_MACH_AML_M5900 is not set -+# CONFIG_MACH_VR1000 is not set -+CONFIG_MACH_QT2410=y -+# CONFIG_MACH_NEO1973_GTA01 is not set -+ -+# -+# S3C2412 Machines -+# -+# CONFIG_MACH_SMDK2413 is not set -+# CONFIG_MACH_SMDK2412 is not set -+# CONFIG_MACH_VSTMS is not set -+CONFIG_CPU_S3C2440=y -+CONFIG_S3C2440_DMA=y -+# CONFIG_S3C2440_C_FIQ is not set -+ -+# -+# S3C2440 Machines -+# -+# CONFIG_MACH_ANUBIS is not set -+# CONFIG_MACH_OSIRIS is not set -+# CONFIG_MACH_RX3715 is not set -+CONFIG_ARCH_S3C2440=y -+# CONFIG_MACH_NEXCODER_2440 is not set -+CONFIG_SMDK2440_CPU2440=y -+# CONFIG_MACH_HXD8 is not set -+# CONFIG_MACH_NEO1973_GTA02 is not set -+CONFIG_MACH_M800=y -+CONFIG_CPU_S3C2442=y -+ -+# -+# S3C2442 Machines -+# -+CONFIG_SMDK2440_CPU2442=y -+ -+# -+# S3C2443 Machines -+# -+# CONFIG_MACH_SMDK2443 is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM920T=y -+CONFIG_CPU_32v4T=y -+CONFIG_CPU_ABRT_EV4T=y -+CONFIG_CPU_CACHE_V4WT=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_TICK_ONESHOT is not set -+CONFIG_PREEMPT=y -+CONFIG_NO_IDLE_HZ=y -+CONFIG_HZ=200 -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="root=/dev/mmcblk0p1 rootdelay=5" -+# CONFIG_XIP_KERNEL is not set -+CONFIG_KEXEC=y -+CONFIG_ATAGS_PROC=y -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+CONFIG_PM_LEGACY=y -+CONFIG_PM_DEBUG=y -+# CONFIG_PM_VERBOSE is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND_UP_POSSIBLE=y -+CONFIG_SUSPEND=y -+CONFIG_APM_EMULATION=y -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+CONFIG_XFRM_MIGRATE=y -+CONFIG_NET_KEY=m -+CONFIG_NET_KEY_MIGRATE=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_MULTIPLE_TABLES=y -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_NET_IPGRE_BROADCAST is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_TUNNEL=m -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+CONFIG_TCP_MD5SIG=y -+# CONFIG_IP_VS is not set -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_NETWORK_SECMARK is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+ -+# -+# Core Netfilter Configuration -+# -+CONFIG_NETFILTER_NETLINK=m -+CONFIG_NETFILTER_NETLINK_QUEUE=m -+CONFIG_NETFILTER_NETLINK_LOG=m -+CONFIG_NF_CONNTRACK_ENABLED=m -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CT_ACCT=y -+CONFIG_NF_CONNTRACK_MARK=y -+CONFIG_NF_CONNTRACK_EVENTS=y -+CONFIG_NF_CT_PROTO_GRE=m -+CONFIG_NF_CT_PROTO_SCTP=m -+# CONFIG_NF_CT_PROTO_UDPLITE is not set -+# CONFIG_NF_CONNTRACK_AMANDA is not set -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_H323=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_NETBIOS_NS=m -+CONFIG_NF_CONNTRACK_PPTP=m -+CONFIG_NF_CONNTRACK_SANE=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CONNTRACK_TFTP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_XTABLES=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HELPER=m -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+CONFIG_NETFILTER_XT_MATCH_SCTP=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_TIME is not set -+# CONFIG_NETFILTER_XT_MATCH_U32 is not set -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+ -+# -+# IP: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_NF_CONNTRACK_PROC_COMPAT=y -+# CONFIG_IP_NF_QUEUE is not set -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_IPRANGE=m -+CONFIG_IP_NF_MATCH_TOS=m -+# CONFIG_IP_NF_MATCH_RECENT is not set -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_MATCH_OWNER=m -+CONFIG_IP_NF_MATCH_ADDRTYPE=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_TARGET_LOG=m -+CONFIG_IP_NF_TARGET_ULOG=m -+CONFIG_NF_NAT=m -+CONFIG_NF_NAT_NEEDED=y -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_IP_NF_TARGET_REDIRECT=m -+CONFIG_IP_NF_TARGET_NETMAP=m -+CONFIG_IP_NF_TARGET_SAME=m -+CONFIG_NF_NAT_SNMP_BASIC=m -+CONFIG_NF_NAT_PROTO_GRE=m -+CONFIG_NF_NAT_FTP=m -+CONFIG_NF_NAT_IRC=m -+CONFIG_NF_NAT_TFTP=m -+# CONFIG_NF_NAT_AMANDA is not set -+CONFIG_NF_NAT_PPTP=m -+CONFIG_NF_NAT_H323=m -+CONFIG_NF_NAT_SIP=m -+CONFIG_IP_NF_MANGLE=m -+CONFIG_IP_NF_TARGET_TOS=m -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+CONFIG_IP_NF_TARGET_CLUSTERIP=m -+# CONFIG_IP_NF_RAW is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+ -+# -+# IPv6: Netfilter Configuration (EXPERIMENTAL) -+# -+CONFIG_NF_CONNTRACK_IPV6=m -+# CONFIG_IP6_NF_QUEUE is not set -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_OWNER=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_LOG=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_TARGET_HL=m -+# CONFIG_IP6_NF_RAW is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+CONFIG_NET_SCHED=y -+ -+# -+# Queueing/Scheduling -+# -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+# CONFIG_NET_SCH_RR is not set -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+CONFIG_NET_SCH_INGRESS=m -+ -+# -+# Classification -+# -+CONFIG_NET_CLS=y -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_ROUTE=y -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_PERF=y -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+# CONFIG_NET_EMATCH is not set -+# CONFIG_NET_CLS_ACT is not set -+# CONFIG_NET_CLS_POLICE is not set -+# CONFIG_NET_CLS_IND is not set -+CONFIG_NET_SCH_FIFO=y -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+CONFIG_BT=m -+CONFIG_BT_L2CAP=m -+CONFIG_BT_SCO=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+ -+# -+# Bluetooth device drivers -+# -+CONFIG_BT_HCIUSB=m -+CONFIG_BT_HCIUSB_SCO=y -+# CONFIG_BT_HCIBTSDIO is not set -+# CONFIG_BT_HCIUART is not set -+# CONFIG_BT_HCIBCM203X is not set -+# CONFIG_BT_HCIBPA10X is not set -+# CONFIG_BT_HCIBFUSB is not set -+# CONFIG_BT_HCIVHCI is not set -+# CONFIG_AF_RXRPC is not set -+CONFIG_FIB_RULES=y -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+CONFIG_WIRELESS_EXT=y -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=m -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+CONFIG_CONNECTOR=m -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_CFI_INTELEXT=y -+# CONFIG_MTD_CFI_AMDSTD is not set -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+CONFIG_MTD_ABSENT=y -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x8000000 -+CONFIG_MTD_PHYSMAP_LEN=0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_ARM_INTEGRATOR is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+CONFIG_MTD_NAND_VERIFY_WRITE=y -+# CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+CONFIG_MTD_NAND_IDS=y -+CONFIG_MTD_NAND_S3C2410=y -+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set -+CONFIG_MTD_NAND_S3C2410_HWECC=y -+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+# CONFIG_MTD_NAND_NANDSIM is not set -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+CONFIG_BLK_DEV_UB=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_IDE is not set -+ -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=m -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=m -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=m -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+CONFIG_CHR_DEV_SG=m -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+CONFIG_SCSI_SCAN_ASYNC=y -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+CONFIG_TUN=m -+# CONFIG_VETH is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+CONFIG_NET_PCI=y -+# CONFIG_B44 is not set -+CONFIG_CS89x0=m -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_RNDIS_HOST=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_BELKIN=y -+CONFIG_USB_ARMLINUX=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_KC2190=y -+CONFIG_USB_NET_ZAURUS=m -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_MPPE=m -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+CONFIG_KEYBOARD_STOWAWAY=m -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_KEYBOARD_M800=y -+CONFIG_KEYBOARD_QT2410=y -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+# CONFIG_MOUSE_GPIO is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+# CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+CONFIG_TOUCHSCREEN_S3C2410=y -+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+CONFIG_INPUT_MISC=y -+# CONFIG_INPUT_ATI_REMOTE is not set -+# CONFIG_INPUT_ATI_REMOTE2 is not set -+# CONFIG_INPUT_KEYSPAN_REMOTE is not set -+# CONFIG_INPUT_POWERMATE is not set -+# CONFIG_INPUT_YEALINK is not set -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_LIS302DL=y -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+# CONFIG_SERIO_SERPORT is not set -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_NR_TTY_DEVICES=4 -+CONFIG_HW_CONSOLE=y -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_S3C2410=y -+CONFIG_SERIAL_S3C2410_CONSOLE=y -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+CONFIG_I2C_S3C2410=y -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+CONFIG_SENSORS_PCF50606=y -+CONFIG_SENSORS_PCF50633=y -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+CONFIG_SENSORS_TSL256X=m -+# CONFIG_PCA9632 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_BITBANG=y -+CONFIG_SPI_S3C24XX=y -+CONFIG_SPI_S3C24XX_GPIO=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+CONFIG_POWER_SUPPLY=y -+# CONFIG_POWER_SUPPLY_DEBUG is not set -+# CONFIG_PDA_POWER is not set -+CONFIG_APM_POWER=y -+# CONFIG_BATTERY_DS2760 is not set -+CONFIG_BATTERY_BQ27000_HDQ=y -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_S3C2410_WATCHDOG=m -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+# CONFIG_MFD_GLAMO is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_UVESA is not set -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_S3C2410=y -+# CONFIG_FB_S3C2410_DEBUG is not set -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+# CONFIG_LCD_LTV350QV is not set -+CONFIG_BACKLIGHT_CLASS_DEVICE=y -+# CONFIG_BACKLIGHT_CORGI is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+CONFIG_DISPLAY_JBT6K74=y -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -+CONFIG_FONTS=y -+# CONFIG_FONT_8x8 is not set -+# CONFIG_FONT_8x16 is not set -+CONFIG_FONT_6x11=y -+# CONFIG_FONT_7x14 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+# CONFIG_FONT_MINI_4x6 is not set -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_10x18 is not set -+# CONFIG_LOGO is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=y -+ -+# -+# Advanced Linux Sound Architecture -+# -+CONFIG_SND=m -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+CONFIG_SND_RAWMIDI=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+CONFIG_SND_SUPPORT_OLD_API=y -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+ -+# -+# Generic devices -+# -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+ -+# -+# ALSA ARM devices -+# -+ -+# -+# SPI devices -+# -+ -+# -+# USB devices -+# -+# CONFIG_SND_USB_AUDIO is not set -+# CONFIG_SND_USB_CAIAQ is not set -+ -+# -+# System on Chip audio support -+# -+CONFIG_SND_SOC=m -+CONFIG_SND_S3C24XX_SOC=m -+ -+# -+# SoC Audio support for SuperH -+# -+ -+# -+# Open Sound System -+# -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=y -+# CONFIG_USB_HIDINPUT_POWERBOOK is not set -+# CONFIG_HID_FF is not set -+CONFIG_USB_HIDDEV=y -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+CONFIG_USB_SUSPEND=y -+# CONFIG_USB_PERSIST is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=m -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+CONFIG_USB_ACM=m -+CONFIG_USB_PRINTER=m -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=m -+# CONFIG_USB_STORAGE_DEBUG is not set -+CONFIG_USB_STORAGE_DATAFAB=y -+CONFIG_USB_STORAGE_FREECOM=y -+# CONFIG_USB_STORAGE_ISD200 is not set -+CONFIG_USB_STORAGE_DPCM=y -+CONFIG_USB_STORAGE_USBAT=y -+CONFIG_USB_STORAGE_SDDR09=y -+CONFIG_USB_STORAGE_SDDR55=y -+CONFIG_USB_STORAGE_JUMPSHOT=y -+CONFIG_USB_STORAGE_ALAUDA=y -+CONFIG_USB_STORAGE_KARMA=y -+CONFIG_USB_LIBUSUAL=y -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+CONFIG_USB_MON=y -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_AIRPRIME=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+# CONFIG_USB_SERIAL_CH341 is not set -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP2101=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_FUNSOFT=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KEYSPAN_MPR=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19=y -+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+# CONFIG_USB_SERIAL_OTI6858 is not set -+CONFIG_USB_SERIAL_HP4X=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SAFE_PADDED=y -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+# CONFIG_USB_SERIAL_DEBUG is not set -+CONFIG_USB_EZUSB=y -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+CONFIG_USB_GADGET_S3C2410=y -+CONFIG_USB_S3C2410=y -+# CONFIG_USB_S3C2410_DEBUG is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=y -+CONFIG_USB_ETH_RNDIS=y -+# CONFIG_USB_GADGETFS is not set -+# CONFIG_USB_FILE_STORAGE is not set -+# CONFIG_USB_G_SERIAL is not set -+CONFIG_USB_MIDI_GADGET=m -+ -+# -+# SDIO support -+# -+# CONFIG_SDIO is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+CONFIG_MMC_UNSAFE_RESUME=y -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+CONFIG_SDIO_UART=m -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SPI is not set -+CONFIG_MMC_S3C=y -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_S3C24XX=m -+# CONFIG_LEDS_GPIO is not set -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+CONFIG_RTC_DEBUG=y -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_S3C=m -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+CONFIG_ROMFS_FS=y -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+CONFIG_AUTOFS4_FS=m -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+# CONFIG_ZISOFS is not set -+CONFIG_UDF_FS=m -+CONFIG_UDF_NLS=y -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=m -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+CONFIG_JFFS2_SUMMARY=y -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+CONFIG_NFS_V4=y -+# CONFIG_NFS_DIRECTIO is not set -+CONFIG_NFSD=m -+CONFIG_NFSD_V3=y -+# CONFIG_NFSD_V3_ACL is not set -+CONFIG_NFSD_V4=y -+CONFIG_NFSD_TCP=y -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=m -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+CONFIG_SUNRPC_GSS=y -+# CONFIG_SUNRPC_BIND34 is not set -+CONFIG_RPCSEC_GSS_KRB5=y -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+CONFIG_CIFS=m -+# CONFIG_CIFS_STATS is not set -+CONFIG_CIFS_WEAK_PW_HASH=y -+# CONFIG_CIFS_XATTR is not set -+# CONFIG_CIFS_DEBUG2 is not set -+# CONFIG_CIFS_EXPERIMENTAL is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=m -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+# CONFIG_MARKERS is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_SCHED_DEBUG is not set -+# CONFIG_SCHEDSTATS is not set -+CONFIG_TIMER_STATS=y -+# CONFIG_DEBUG_SLAB is not set -+CONFIG_DEBUG_PREEMPT=y -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+# CONFIG_DEBUG_USER is not set -+CONFIG_DEBUG_ERRORS=y -+# CONFIG_DEBUG_LL is not set -+CONFIG_DEBUG_S3C_UART=2 -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_NULL=m -+CONFIG_CRYPTO_MD4=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=m -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_GF128MUL=m -+CONFIG_CRYPTO_ECB=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_PCBC=m -+CONFIG_CRYPTO_LRW=m -+# CONFIG_CRYPTO_XTS is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_FCRYPT=m -+CONFIG_CRYPTO_BLOWFISH=m -+CONFIG_CRYPTO_TWOFISH=m -+CONFIG_CRYPTO_TWOFISH_COMMON=m -+CONFIG_CRYPTO_SERPENT=m -+CONFIG_CRYPTO_AES=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_CAST6=m -+CONFIG_CRYPTO_TEA=m -+CONFIG_CRYPTO_ARC4=m -+CONFIG_CRYPTO_KHAZAD=m -+CONFIG_CRYPTO_ANUBIS=m -+# CONFIG_CRYPTO_SEED is not set -+CONFIG_CRYPTO_DEFLATE=m -+CONFIG_CRYPTO_MICHAEL_MIC=m -+CONFIG_CRYPTO_CRC32C=m -+CONFIG_CRYPTO_CAMELLIA=m -+CONFIG_CRYPTO_TEST=m -+# CONFIG_CRYPTO_AUTHENC is not set -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=m -+CONFIG_CRC16=m -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=m -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_TEXTSEARCH=y -+CONFIG_TEXTSEARCH_KMP=m -+CONFIG_TEXTSEARCH_BM=m -+CONFIG_TEXTSEARCH_FSM=m -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -Index: linux-2.6.24.7/arch/arm/configs/gta02-moredrivers-defconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/configs/gta02-moredrivers-defconfig 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,1833 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.24 -+# Sat Mar 1 11:36:29 2008 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+CONFIG_NO_IOPORT=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_FIQ=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_LOCK_KERNEL=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="-mokodev" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=16 -+# CONFIG_CGROUPS is not set -+CONFIG_FAIR_GROUP_SCHED=y -+CONFIG_FAIR_USER_SCHED=y -+# CONFIG_FAIR_CGROUP_SCHED is not set -+# CONFIG_SYSFS_DEPRECATED is not set -+# CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+CONFIG_KALLSYMS_ALL=y -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=m -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=m -+# CONFIG_DEFAULT_AS is not set -+CONFIG_DEFAULT_DEADLINE=y -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="deadline" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_AT91 is not set -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+CONFIG_ARCH_S3C2410=y -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+CONFIG_PLAT_S3C24XX=y -+CONFIG_CPU_S3C244X=y -+CONFIG_S3C2410_DMA=y -+# CONFIG_S3C2410_DMA_DEBUG is not set -+CONFIG_MACH_SMDK=y -+CONFIG_MACH_NEO1973=y -+CONFIG_PLAT_S3C=y -+CONFIG_CPU_LLSERIAL_S3C2410=y -+CONFIG_CPU_LLSERIAL_S3C2440=y -+ -+# -+# Boot options -+# -+# CONFIG_S3C_BOOT_WATCHDOG is not set -+# CONFIG_S3C_BOOT_ERROR_RESET is not set -+ -+# -+# Power management -+# -+# CONFIG_S3C2410_PM_DEBUG is not set -+# CONFIG_S3C2410_PM_CHECK is not set -+CONFIG_S3C_LOWLEVEL_UART_PORT=2 -+ -+# -+# S3C2400 Machines -+# -+CONFIG_CPU_S3C2410=y -+CONFIG_CPU_S3C2410_DMA=y -+CONFIG_S3C2410_PM=y -+CONFIG_S3C2410_GPIO=y -+CONFIG_S3C2410_CLOCK=y -+CONFIG_S3C2410_PWM=y -+ -+# -+# S3C2410 Machines -+# -+# CONFIG_ARCH_SMDK2410 is not set -+# CONFIG_ARCH_H1940 is not set -+# CONFIG_MACH_N30 is not set -+# CONFIG_ARCH_BAST is not set -+# CONFIG_MACH_OTOM is not set -+# CONFIG_MACH_AML_M5900 is not set -+# CONFIG_MACH_VR1000 is not set -+CONFIG_MACH_QT2410=y -+CONFIG_MACH_NEO1973_GTA01=y -+ -+# -+# S3C2412 Machines -+# -+# CONFIG_MACH_SMDK2413 is not set -+# CONFIG_MACH_SMDK2412 is not set -+# CONFIG_MACH_VSTMS is not set -+CONFIG_CPU_S3C2440=y -+CONFIG_S3C2440_DMA=y -+CONFIG_S3C2440_C_FIQ=y -+ -+# -+# S3C2440 Machines -+# -+# CONFIG_MACH_ANUBIS is not set -+# CONFIG_MACH_OSIRIS is not set -+# CONFIG_MACH_RX3715 is not set -+CONFIG_ARCH_S3C2440=y -+# CONFIG_MACH_NEXCODER_2440 is not set -+CONFIG_SMDK2440_CPU2440=y -+CONFIG_MACH_HXD8=y -+CONFIG_MACH_NEO1973_GTA02=y -+# CONFIG_NEO1973_GTA02_2440 is not set -+CONFIG_CPU_S3C2442=y -+ -+# -+# S3C2442 Machines -+# -+CONFIG_SMDK2440_CPU2442=y -+ -+# -+# S3C2443 Machines -+# -+# CONFIG_MACH_SMDK2443 is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM920T=y -+CONFIG_CPU_32v4T=y -+CONFIG_CPU_ABRT_EV4T=y -+CONFIG_CPU_CACHE_V4WT=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_TICK_ONESHOT is not set -+CONFIG_PREEMPT=y -+CONFIG_NO_IDLE_HZ=y -+CONFIG_HZ=200 -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="unused -- bootloader passes ATAG list" -+# CONFIG_XIP_KERNEL is not set -+CONFIG_KEXEC=y -+CONFIG_ATAGS_PROC=y -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+CONFIG_PM_LEGACY=y -+CONFIG_PM_DEBUG=y -+CONFIG_PM_VERBOSE=y -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND_UP_POSSIBLE=y -+CONFIG_SUSPEND=y -+CONFIG_APM_EMULATION=y -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+CONFIG_XFRM_MIGRATE=y -+CONFIG_NET_KEY=m -+CONFIG_NET_KEY_MIGRATE=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_MULTIPLE_TABLES=y -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_NET_IPGRE_BROADCAST is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_TUNNEL=m -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+CONFIG_TCP_MD5SIG=y -+# CONFIG_IP_VS is not set -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_NETWORK_SECMARK is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+CONFIG_BRIDGE_NETFILTER=y -+ -+# -+# Core Netfilter Configuration -+# -+CONFIG_NETFILTER_NETLINK=m -+CONFIG_NETFILTER_NETLINK_QUEUE=m -+CONFIG_NETFILTER_NETLINK_LOG=m -+CONFIG_NF_CONNTRACK_ENABLED=m -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CT_ACCT=y -+CONFIG_NF_CONNTRACK_MARK=y -+CONFIG_NF_CONNTRACK_EVENTS=y -+CONFIG_NF_CT_PROTO_GRE=m -+CONFIG_NF_CT_PROTO_SCTP=m -+# CONFIG_NF_CT_PROTO_UDPLITE is not set -+# CONFIG_NF_CONNTRACK_AMANDA is not set -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_H323=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_NETBIOS_NS=m -+CONFIG_NF_CONNTRACK_PPTP=m -+CONFIG_NF_CONNTRACK_SANE=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CONNTRACK_TFTP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_XTABLES=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HELPER=m -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+CONFIG_NETFILTER_XT_MATCH_SCTP=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_TIME is not set -+# CONFIG_NETFILTER_XT_MATCH_U32 is not set -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+ -+# -+# IP: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_NF_CONNTRACK_PROC_COMPAT=y -+# CONFIG_IP_NF_QUEUE is not set -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_IPRANGE=m -+CONFIG_IP_NF_MATCH_TOS=m -+# CONFIG_IP_NF_MATCH_RECENT is not set -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_MATCH_OWNER=m -+CONFIG_IP_NF_MATCH_ADDRTYPE=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_TARGET_LOG=m -+CONFIG_IP_NF_TARGET_ULOG=m -+CONFIG_NF_NAT=m -+CONFIG_NF_NAT_NEEDED=y -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_IP_NF_TARGET_REDIRECT=m -+CONFIG_IP_NF_TARGET_NETMAP=m -+CONFIG_IP_NF_TARGET_SAME=m -+CONFIG_NF_NAT_SNMP_BASIC=m -+CONFIG_NF_NAT_PROTO_GRE=m -+CONFIG_NF_NAT_FTP=m -+CONFIG_NF_NAT_IRC=m -+CONFIG_NF_NAT_TFTP=m -+# CONFIG_NF_NAT_AMANDA is not set -+CONFIG_NF_NAT_PPTP=m -+CONFIG_NF_NAT_H323=m -+CONFIG_NF_NAT_SIP=m -+CONFIG_IP_NF_MANGLE=m -+CONFIG_IP_NF_TARGET_TOS=m -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+CONFIG_IP_NF_TARGET_CLUSTERIP=m -+# CONFIG_IP_NF_RAW is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+ -+# -+# IPv6: Netfilter Configuration (EXPERIMENTAL) -+# -+CONFIG_NF_CONNTRACK_IPV6=m -+# CONFIG_IP6_NF_QUEUE is not set -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_OWNER=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_LOG=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_TARGET_HL=m -+# CONFIG_IP6_NF_RAW is not set -+ -+# -+# Bridge: Netfilter Configuration -+# -+CONFIG_BRIDGE_NF_EBTABLES=m -+CONFIG_BRIDGE_EBT_BROUTE=m -+CONFIG_BRIDGE_EBT_T_FILTER=m -+CONFIG_BRIDGE_EBT_T_NAT=m -+CONFIG_BRIDGE_EBT_802_3=m -+CONFIG_BRIDGE_EBT_AMONG=m -+CONFIG_BRIDGE_EBT_ARP=m -+CONFIG_BRIDGE_EBT_IP=m -+CONFIG_BRIDGE_EBT_LIMIT=m -+CONFIG_BRIDGE_EBT_MARK=m -+CONFIG_BRIDGE_EBT_PKTTYPE=m -+CONFIG_BRIDGE_EBT_STP=m -+CONFIG_BRIDGE_EBT_VLAN=m -+CONFIG_BRIDGE_EBT_ARPREPLY=m -+CONFIG_BRIDGE_EBT_DNAT=m -+CONFIG_BRIDGE_EBT_MARK_T=m -+CONFIG_BRIDGE_EBT_REDIRECT=m -+CONFIG_BRIDGE_EBT_SNAT=m -+CONFIG_BRIDGE_EBT_LOG=m -+CONFIG_BRIDGE_EBT_ULOG=m -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+CONFIG_BRIDGE=y -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+CONFIG_LLC=y -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+CONFIG_NET_SCHED=y -+ -+# -+# Queueing/Scheduling -+# -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+# CONFIG_NET_SCH_RR is not set -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+CONFIG_NET_SCH_INGRESS=m -+ -+# -+# Classification -+# -+CONFIG_NET_CLS=y -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_ROUTE=y -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_PERF=y -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+# CONFIG_NET_EMATCH is not set -+# CONFIG_NET_CLS_ACT is not set -+# CONFIG_NET_CLS_POLICE is not set -+# CONFIG_NET_CLS_IND is not set -+CONFIG_NET_SCH_FIFO=y -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+CONFIG_BT=y -+CONFIG_BT_L2CAP=y -+CONFIG_BT_SCO=y -+CONFIG_BT_RFCOMM=y -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=y -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=y -+ -+# -+# Bluetooth device drivers -+# -+CONFIG_BT_HCIUSB=y -+CONFIG_BT_HCIUSB_SCO=y -+# CONFIG_BT_HCIBTSDIO is not set -+# CONFIG_BT_HCIUART is not set -+# CONFIG_BT_HCIBCM203X is not set -+# CONFIG_BT_HCIBPA10X is not set -+# CONFIG_BT_HCIBFUSB is not set -+# CONFIG_BT_HCIVHCI is not set -+# CONFIG_AF_RXRPC is not set -+CONFIG_FIB_RULES=y -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+CONFIG_WIRELESS_EXT=y -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=m -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+CONFIG_CONNECTOR=m -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+CONFIG_MTD_CONCAT=y -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_CFI_INTELEXT=y -+# CONFIG_MTD_CFI_AMDSTD is not set -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+CONFIG_MTD_ROM=y -+CONFIG_MTD_ABSENT=y -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x0 -+CONFIG_MTD_PHYSMAP_LEN=0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_ARM_INTEGRATOR is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+CONFIG_MTD_NAND_VERIFY_WRITE=y -+# CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+CONFIG_MTD_NAND_IDS=y -+CONFIG_MTD_NAND_S3C2410=y -+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set -+CONFIG_MTD_NAND_S3C2410_HWECC=y -+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+# CONFIG_MTD_NAND_NANDSIM is not set -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_PNP=y -+CONFIG_PNP_DEBUG=y -+ -+# -+# Protocols -+# -+# CONFIG_PNPACPI is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+CONFIG_BLK_DEV_UB=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=m -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=m -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=m -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+CONFIG_CHR_DEV_SG=m -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+CONFIG_SCSI_SCAN_ASYNC=y -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+# CONFIG_ATA is not set -+CONFIG_MD=y -+# CONFIG_BLK_DEV_MD is not set -+CONFIG_BLK_DEV_DM=m -+# CONFIG_DM_DEBUG is not set -+CONFIG_DM_CRYPT=m -+CONFIG_DM_SNAPSHOT=m -+# CONFIG_DM_MIRROR is not set -+# CONFIG_DM_ZERO is not set -+# CONFIG_DM_MULTIPATH is not set -+# CONFIG_DM_DELAY is not set -+# CONFIG_DM_UEVENT is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+CONFIG_TUN=m -+# CONFIG_VETH is not set -+# CONFIG_NET_SB1000 is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+CONFIG_NET_PCI=y -+# CONFIG_B44 is not set -+CONFIG_CS89x0=m -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_RNDIS_HOST=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_BELKIN=y -+CONFIG_USB_ARMLINUX=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_KC2190=y -+CONFIG_USB_NET_ZAURUS=m -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_MPPE=m -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+CONFIG_KEYBOARD_STOWAWAY=m -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_KEYBOARD_NEO1973=y -+CONFIG_KEYBOARD_QT2410=y -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+# CONFIG_MOUSE_GPIO is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+# CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+CONFIG_TOUCHSCREEN_S3C2410=y -+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+CONFIG_INPUT_MISC=y -+# CONFIG_INPUT_ATI_REMOTE is not set -+# CONFIG_INPUT_ATI_REMOTE2 is not set -+# CONFIG_INPUT_KEYSPAN_REMOTE is not set -+# CONFIG_INPUT_POWERMATE is not set -+# CONFIG_INPUT_YEALINK is not set -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_LIS302DL=y -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+# CONFIG_SERIO_SERPORT is not set -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_NR_TTY_DEVICES=4 -+CONFIG_HW_CONSOLE=y -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_S3C2410=y -+CONFIG_SERIAL_S3C2410_CONSOLE=y -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+CONFIG_I2C_S3C2410=y -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+CONFIG_SENSORS_PCF50606=y -+CONFIG_SENSORS_PCF50633=y -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+CONFIG_SENSORS_TSL256X=m -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_BITBANG=y -+# CONFIG_SPI_S3C24XX is not set -+CONFIG_SPI_S3C24XX_GPIO=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+CONFIG_POWER_SUPPLY=y -+CONFIG_POWER_SUPPLY_DEBUG=y -+CONFIG_PDA_POWER=y -+CONFIG_APM_POWER=y -+# CONFIG_BATTERY_DS2760 is not set -+# CONFIG_BATTERY_GTA01 is not set -+CONFIG_BATTERY_BQ27000_HDQ=y -+CONFIG_GTA02_HDQ=y -+CONFIG_HWMON=y -+# CONFIG_HWMON_VID is not set -+# CONFIG_SENSORS_AD7418 is not set -+# CONFIG_SENSORS_ADM1021 is not set -+# CONFIG_SENSORS_ADM1025 is not set -+# CONFIG_SENSORS_ADM1026 is not set -+# CONFIG_SENSORS_ADM1029 is not set -+# CONFIG_SENSORS_ADM1031 is not set -+# CONFIG_SENSORS_ADM9240 is not set -+# CONFIG_SENSORS_ADT7470 is not set -+# CONFIG_SENSORS_ATXP1 is not set -+# CONFIG_SENSORS_DS1621 is not set -+# CONFIG_SENSORS_F71805F is not set -+# CONFIG_SENSORS_F71882FG is not set -+# CONFIG_SENSORS_F75375S is not set -+# CONFIG_SENSORS_GL518SM is not set -+# CONFIG_SENSORS_GL520SM is not set -+# CONFIG_SENSORS_IT87 is not set -+# CONFIG_SENSORS_LM63 is not set -+# CONFIG_SENSORS_LM70 is not set -+# CONFIG_SENSORS_LM75 is not set -+# CONFIG_SENSORS_LM77 is not set -+# CONFIG_SENSORS_LM78 is not set -+# CONFIG_SENSORS_LM80 is not set -+# CONFIG_SENSORS_LM83 is not set -+# CONFIG_SENSORS_LM85 is not set -+# CONFIG_SENSORS_LM87 is not set -+# CONFIG_SENSORS_LM90 is not set -+# CONFIG_SENSORS_LM92 is not set -+# CONFIG_SENSORS_LM93 is not set -+# CONFIG_SENSORS_MAX1619 is not set -+# CONFIG_SENSORS_MAX6650 is not set -+# CONFIG_SENSORS_PC87360 is not set -+# CONFIG_SENSORS_PC87427 is not set -+# CONFIG_SENSORS_DME1737 is not set -+# CONFIG_SENSORS_SMSC47M1 is not set -+# CONFIG_SENSORS_SMSC47M192 is not set -+# CONFIG_SENSORS_SMSC47B397 is not set -+# CONFIG_SENSORS_THMC50 is not set -+# CONFIG_SENSORS_VT1211 is not set -+# CONFIG_SENSORS_W83781D is not set -+# CONFIG_SENSORS_W83791D is not set -+# CONFIG_SENSORS_W83792D is not set -+# CONFIG_SENSORS_W83793 is not set -+# CONFIG_SENSORS_W83L785TS is not set -+# CONFIG_SENSORS_W83627HF is not set -+# CONFIG_SENSORS_W83627EHF is not set -+# CONFIG_HWMON_DEBUG_CHIP is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_S3C2410_WATCHDOG=m -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+CONFIG_MFD_GLAMO=y -+CONFIG_MFD_GLAMO_FB=y -+CONFIG_MFD_GLAMO_SPI_GPIO=y -+CONFIG_MFD_GLAMO_SPI_FB=y -+CONFIG_MFD_GLAMO_MCI=y -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+CONFIG_VIDEO_OUTPUT_CONTROL=y -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_UVESA is not set -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_S3C2410=y -+# CONFIG_FB_S3C2410_DEBUG is not set -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+CONFIG_LCD_LTV350QV=y -+CONFIG_BACKLIGHT_CLASS_DEVICE=y -+# CONFIG_BACKLIGHT_CORGI is not set -+CONFIG_BACKLIGHT_GTA01=y -+ -+# -+# Display device support -+# -+CONFIG_DISPLAY_SUPPORT=y -+ -+# -+# Display hardware drivers -+# -+CONFIG_DISPLAY_JBT6K74=y -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -+CONFIG_FONTS=y -+# CONFIG_FONT_8x8 is not set -+# CONFIG_FONT_8x16 is not set -+CONFIG_FONT_6x11=y -+# CONFIG_FONT_7x14 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+# CONFIG_FONT_MINI_4x6 is not set -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_10x18 is not set -+# CONFIG_LOGO is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=y -+ -+# -+# Advanced Linux Sound Architecture -+# -+CONFIG_SND=y -+CONFIG_SND_TIMER=y -+CONFIG_SND_PCM=y -+CONFIG_SND_HWDEP=y -+CONFIG_SND_RAWMIDI=y -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=y -+CONFIG_SND_PCM_OSS=y -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+CONFIG_SND_SUPPORT_OLD_API=y -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+ -+# -+# Generic devices -+# -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+ -+# -+# ALSA ARM devices -+# -+ -+# -+# SPI devices -+# -+ -+# -+# USB devices -+# -+CONFIG_SND_USB_AUDIO=m -+# CONFIG_SND_USB_CAIAQ is not set -+ -+# -+# System on Chip audio support -+# -+CONFIG_SND_SOC=y -+CONFIG_SND_S3C24XX_SOC=y -+CONFIG_SND_S3C24XX_SOC_I2S=y -+# CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753 is not set -+CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=y -+ -+# -+# SoC Audio support for SuperH -+# -+CONFIG_SND_SOC_WM8753=y -+ -+# -+# Open Sound System -+# -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=y -+# CONFIG_USB_HIDINPUT_POWERBOOK is not set -+# CONFIG_HID_FF is not set -+CONFIG_USB_HIDDEV=y -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+CONFIG_USB_SUSPEND=y -+CONFIG_USB_PERSIST=y -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+CONFIG_USB_ACM=m -+CONFIG_USB_PRINTER=m -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=m -+# CONFIG_USB_STORAGE_DEBUG is not set -+CONFIG_USB_STORAGE_DATAFAB=y -+CONFIG_USB_STORAGE_FREECOM=y -+# CONFIG_USB_STORAGE_ISD200 is not set -+CONFIG_USB_STORAGE_DPCM=y -+CONFIG_USB_STORAGE_USBAT=y -+CONFIG_USB_STORAGE_SDDR09=y -+CONFIG_USB_STORAGE_SDDR55=y -+CONFIG_USB_STORAGE_JUMPSHOT=y -+CONFIG_USB_STORAGE_ALAUDA=y -+CONFIG_USB_STORAGE_KARMA=y -+CONFIG_USB_LIBUSUAL=y -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+CONFIG_USB_MON=y -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+CONFIG_USB_SERIAL=y -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_AIRPRIME=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+# CONFIG_USB_SERIAL_CH341 is not set -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP2101=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_FUNSOFT=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KEYSPAN_MPR=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19=y -+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+# CONFIG_USB_SERIAL_OTI6858 is not set -+CONFIG_USB_SERIAL_HP4X=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SAFE_PADDED=y -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=y -+CONFIG_USB_SERIAL_OMNINET=m -+# CONFIG_USB_SERIAL_DEBUG is not set -+CONFIG_USB_EZUSB=y -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+CONFIG_USB_BERRY_CHARGE=m -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+# CONFIG_USB_GADGET_DEBUG_FS is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+CONFIG_USB_GADGET_S3C2410=y -+CONFIG_USB_S3C2410=y -+# CONFIG_USB_S3C2410_DEBUG is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=y -+CONFIG_USB_ETH_RNDIS=y -+# CONFIG_USB_GADGETFS is not set -+# CONFIG_USB_FILE_STORAGE is not set -+# CONFIG_USB_G_SERIAL is not set -+# CONFIG_USB_MIDI_GADGET is not set -+ -+# -+# SDIO support -+# -+CONFIG_SDIO=y -+CONFIG_SDIO_S3C24XX=y -+CONFIG_SDIO_S3C24XX_DMA=y -+CONFIG_SDIO_AR6000_WLAN=y -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+CONFIG_MMC_UNSAFE_RESUME=y -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+# CONFIG_MMC_BLOCK_BOUNCE is not set -+# CONFIG_SDIO_UART is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SPI is not set -+# CONFIG_MMC_S3C is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_S3C24XX=m -+CONFIG_LEDS_GPIO=y -+CONFIG_LEDS_NEO1973_VIBRATOR=y -+CONFIG_LEDS_NEO1973_GTA02=y -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+CONFIG_RTC_DEBUG=y -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_S3C=m -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+CONFIG_ROMFS_FS=y -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+CONFIG_AUTOFS4_FS=m -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=y -+CONFIG_JOLIET=y -+# CONFIG_ZISOFS is not set -+CONFIG_UDF_FS=y -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=m -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_YAFFS_FS=y -+CONFIG_YAFFS_YAFFS1=y -+CONFIG_YAFFS_9BYTE_TAGS=y -+CONFIG_YAFFS_YAFFS2=y -+CONFIG_YAFFS_AUTO_YAFFS2=y -+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 -+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+CONFIG_JFFS2_SUMMARY=y -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+# CONFIG_NETWORK_FILESYSTEMS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=m -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+CONFIG_MARKERS=y -+ -+# -+# Kernel hacking -+# -+CONFIG_PRINTK_TIME=y -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+CONFIG_DEBUG_FS=y -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_DEBUG_SHIRQ=y -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+CONFIG_TIMER_STATS=y -+# CONFIG_DEBUG_SLAB is not set -+CONFIG_DEBUG_PREEMPT=y -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+CONFIG_DEBUG_SPINLOCK=y -+CONFIG_DEBUG_MUTEXES=y -+CONFIG_DEBUG_LOCK_ALLOC=y -+# CONFIG_PROVE_LOCKING is not set -+CONFIG_LOCKDEP=y -+CONFIG_LOCK_STAT=y -+CONFIG_DEBUG_LOCKDEP=y -+CONFIG_DEBUG_SPINLOCK_SLEEP=y -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+CONFIG_STACKTRACE=y -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+CONFIG_DEBUG_SG=y -+CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+# CONFIG_DEBUG_USER is not set -+CONFIG_DEBUG_ERRORS=y -+# CONFIG_DEBUG_LL is not set -+# CONFIG_DEBUG_ICEDCC is not set -+# CONFIG_DEBUG_S3C_PORT is not set -+CONFIG_DEBUG_S3C_UART=2 -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_NULL=m -+CONFIG_CRYPTO_MD4=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=m -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_GF128MUL=m -+CONFIG_CRYPTO_ECB=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_PCBC=m -+CONFIG_CRYPTO_LRW=m -+# CONFIG_CRYPTO_XTS is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_FCRYPT=m -+CONFIG_CRYPTO_BLOWFISH=m -+CONFIG_CRYPTO_TWOFISH=m -+CONFIG_CRYPTO_TWOFISH_COMMON=m -+CONFIG_CRYPTO_SERPENT=m -+CONFIG_CRYPTO_AES=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_CAST6=m -+CONFIG_CRYPTO_TEA=m -+CONFIG_CRYPTO_ARC4=m -+CONFIG_CRYPTO_KHAZAD=m -+CONFIG_CRYPTO_ANUBIS=m -+# CONFIG_CRYPTO_SEED is not set -+CONFIG_CRYPTO_DEFLATE=m -+CONFIG_CRYPTO_MICHAEL_MIC=m -+CONFIG_CRYPTO_CRC32C=m -+CONFIG_CRYPTO_CAMELLIA=m -+CONFIG_CRYPTO_TEST=m -+# CONFIG_CRYPTO_AUTHENC is not set -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=m -+CONFIG_CRC16=m -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=m -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_TEXTSEARCH=y -+CONFIG_TEXTSEARCH_KMP=m -+CONFIG_TEXTSEARCH_BM=m -+CONFIG_TEXTSEARCH_FSM=m -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_DMA=y -Index: linux-2.6.24.7/arch/arm/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/Kconfig 2008-12-11 22:46:48.000000000 +0100 -@@ -865,6 +865,13 @@ config KEXEC - initially work for you. It may help to enable device hotplugging - support. - -+config ATAGS_PROC -+ bool "Export atags in procfs" -+ default n -+ help -+ Should the atags used to boot the kernel be exported in an "atags" -+ file in procfs. Useful with kexec. -+ - endmenu - - if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX ) -@@ -1064,6 +1071,8 @@ source "drivers/hid/Kconfig" - - source "drivers/usb/Kconfig" - -+source "drivers/sdio/Kconfig" -+ - source "drivers/mmc/Kconfig" - - source "drivers/leds/Kconfig" -Index: linux-2.6.24.7/arch/arm/kernel/atags.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/kernel/atags.c 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,86 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct buffer { -+ size_t size; -+ char *data; -+}; -+static struct buffer tags_buffer; -+ -+static int -+read_buffer(char* page, char** start, off_t off, int count, -+ int* eof, void* data) -+{ -+ struct buffer *buffer = (struct buffer *)data; -+ -+ if (off >= buffer->size) { -+ *eof = 1; -+ return 0; -+ } -+ -+ count = min((int) (buffer->size - off), count); -+ -+ memcpy(page, &buffer->data[off], count); -+ -+ return count; -+} -+ -+ -+static int -+create_proc_entries(void) -+{ -+ struct proc_dir_entry* tags_entry; -+ -+ tags_entry = create_proc_read_entry("atags", 0400, &proc_root, read_buffer, &tags_buffer); -+ if (!tags_entry) -+ return -ENOMEM; -+ -+ return 0; -+} -+ -+ -+static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE]; -+static char __initdata *atags_copy; -+ -+void __init save_atags(const struct tag *tags) -+{ -+ atags_copy = atags_copy_buf; -+ memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE); -+} -+ -+ -+static int __init init_atags_procfs(void) -+{ -+ struct tag *tag; -+ int error; -+ -+ if (!atags_copy) { -+ printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n"); -+ return -EIO; -+ } -+ -+ for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag)) -+ ; -+ -+ tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr); -+ tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL); -+ if (tags_buffer.data == NULL) -+ return -ENOMEM; -+ memcpy(tags_buffer.data, atags_copy, tags_buffer.size); -+ -+ error = create_proc_entries(); -+ if (error) { -+ printk(KERN_ERR "Exporting ATAGs: not enough memory\n"); -+ kfree(tags_buffer.data); -+ tags_buffer.size = 0; -+ tags_buffer.data = NULL; -+ } -+ -+ return error; -+} -+ -+arch_initcall(init_atags_procfs); -Index: linux-2.6.24.7/arch/arm/kernel/atags.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/kernel/atags.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,5 @@ -+#ifdef CONFIG_ATAGS_PROC -+extern void save_atags(struct tag *tags); -+#else -+static inline void save_atags(struct tag *tags) { } -+#endif -Index: linux-2.6.24.7/arch/arm/kernel/machine_kexec.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/kernel/machine_kexec.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/kernel/machine_kexec.c 2008-12-11 22:46:48.000000000 +0100 -@@ -21,6 +21,7 @@ extern void setup_mm_for_reboot(char mod - extern unsigned long kexec_start_address; - extern unsigned long kexec_indirection_page; - extern unsigned long kexec_mach_type; -+extern unsigned long kexec_boot_atags; - - /* - * Provide a dummy crash_notes definition while crash dump arrives to arm. -@@ -62,6 +63,7 @@ void machine_kexec(struct kimage *image) - kexec_start_address = image->start; - kexec_indirection_page = page_list; - kexec_mach_type = machine_arch_type; -+ kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; - - /* copy our kernel relocation code to the control code page */ - memcpy(reboot_code_buffer, -Index: linux-2.6.24.7/arch/arm/kernel/Makefile -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/kernel/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/kernel/Makefile 2008-12-11 22:46:48.000000000 +0100 -@@ -19,6 +19,7 @@ obj-$(CONFIG_ISA_DMA) += dma-isa.o - obj-$(CONFIG_PCI) += bios32.o isa.o - obj-$(CONFIG_SMP) += smp.o - obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o -+obj-$(CONFIG_ATAGS_PROC) += atags.o - obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o - - obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o -Index: linux-2.6.24.7/arch/arm/kernel/relocate_kernel.S -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/kernel/relocate_kernel.S 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/kernel/relocate_kernel.S 2008-12-11 22:46:48.000000000 +0100 -@@ -7,23 +7,6 @@ - .globl relocate_new_kernel - relocate_new_kernel: - -- /* Move boot params back to where the kernel expects them */ -- -- ldr r0,kexec_boot_params_address -- teq r0,#0 -- beq 8f -- -- ldr r1,kexec_boot_params_copy -- mov r6,#KEXEC_BOOT_PARAMS_SIZE/4 --7: -- ldr r5,[r1],#4 -- str r5,[r0],#4 -- subs r6,r6,#1 -- bne 7b -- --8: -- /* Boot params moved, now go on with the kernel */ -- - ldr r0,kexec_indirection_page - ldr r1,kexec_start_address - -@@ -67,7 +50,7 @@ relocate_new_kernel: - mov lr,r1 - mov r0,#0 - ldr r1,kexec_mach_type -- ldr r2,kexec_boot_params_address -+ ldr r2,kexec_boot_atags - mov pc,lr - - .globl kexec_start_address -@@ -82,14 +65,9 @@ kexec_indirection_page: - kexec_mach_type: - .long 0x0 - -- /* phy addr where new kernel will expect to find boot params */ -- .globl kexec_boot_params_address --kexec_boot_params_address: -- .long 0x0 -- -- /* phy addr where old kernel put a copy of orig boot params */ -- .globl kexec_boot_params_copy --kexec_boot_params_copy: -+ /* phy addr of the atags for the new kernel */ -+ .globl kexec_boot_atags -+kexec_boot_atags: - .long 0x0 - - relocate_new_kernel_end: -Index: linux-2.6.24.7/arch/arm/kernel/setup.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/kernel/setup.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/kernel/setup.c 2008-12-11 22:46:48.000000000 +0100 -@@ -24,7 +24,6 @@ - #include - #include - #include --#include - - #include - #include -@@ -39,6 +38,7 @@ - #include - - #include "compat.h" -+#include "atags.h" - - #ifndef MEM_SIZE - #define MEM_SIZE (16*1024*1024) -@@ -784,23 +784,6 @@ static int __init customize_machine(void - } - arch_initcall(customize_machine); - --#ifdef CONFIG_KEXEC -- --/* Physical addr of where the boot params should be for this machine */ --extern unsigned long kexec_boot_params_address; -- --/* Physical addr of the buffer into which the boot params are copied */ --extern unsigned long kexec_boot_params_copy; -- --/* Pointer to the boot params buffer, for manipulation and display */ --unsigned long kexec_boot_params; --EXPORT_SYMBOL(kexec_boot_params); -- --/* The buffer itself - make sure it is sized correctly */ --static unsigned long kexec_boot_params_buf[(KEXEC_BOOT_PARAMS_SIZE + 3) / 4]; -- --#endif -- - void __init setup_arch(char **cmdline_p) - { - struct tag *tags = (struct tag *)&init_tags; -@@ -819,18 +802,6 @@ void __init setup_arch(char **cmdline_p) - else if (mdesc->boot_params) - tags = phys_to_virt(mdesc->boot_params); - --#ifdef CONFIG_KEXEC -- kexec_boot_params_copy = virt_to_phys(kexec_boot_params_buf); -- kexec_boot_params = (unsigned long)kexec_boot_params_buf; -- if (__atags_pointer) { -- kexec_boot_params_address = __atags_pointer; -- memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE); -- } else if (mdesc->boot_params) { -- kexec_boot_params_address = mdesc->boot_params; -- memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE); -- } --#endif -- - /* - * If we have the old style parameters, convert them to - * a tag list. -@@ -846,6 +817,7 @@ void __init setup_arch(char **cmdline_p) - if (tags->hdr.tag == ATAG_CORE) { - if (meminfo.nr_banks != 0) - squash_mem_tags(tags); -+ save_atags(tags); - parse_tags(tags); - } - -Index: linux-2.6.24.7/arch/arm/mach-s3c2410/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2410/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2410/Kconfig 2008-12-11 22:46:48.000000000 +0100 -@@ -9,6 +9,7 @@ config CPU_S3C2410 - depends on ARCH_S3C2410 - select S3C2410_CLOCK - select S3C2410_GPIO -+ select S3C2410_PWM - select CPU_LLSERIAL_S3C2410 - select S3C2410_PM if PM - help -@@ -37,6 +38,11 @@ config S3C2410_CLOCK - help - Clock code for the S3C2410, and similar processors - -+config S3C2410_PWM -+ bool -+ help -+ PWM timer code for the S3C2410, and similar processors -+ - - menu "S3C2410 Machines" - -@@ -107,8 +113,17 @@ config MACH_VR1000 - config MACH_QT2410 - bool "QT2410" - select CPU_S3C2410 -+ select DISPLAY_JBT6K74 - help - Say Y here if you are using the Armzone QT2410 - -+config MACH_NEO1973_GTA01 -+ bool "FIC Neo1973 GSM Phone (GTA01 Hardware)" -+ select CPU_S3C2410 -+ select MACH_NEO1973 -+ select SENSORS_PCF50606 -+ help -+ Say Y here if you are using the FIC Neo1973 GSM Phone -+ - endmenu - -Index: linux-2.6.24.7/arch/arm/mach-s3c2410/mach-gta01.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2410/mach-gta01.c 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,763 @@ -+/* -+ * linux/arch/arm/mach-s3c2410/mach-gta01.c -+ * -+ * S3C2410 Machine Support for the FIC Neo1973 GTA01 -+ * -+ * Copyright (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../plat-s3c24xx/neo1973_pm_gps.h" -+ -+#include -+ -+static struct map_desc gta01_iodesc[] __initdata = { -+ { -+ .virtual = 0xe0000000, -+ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000), -+ .length = SZ_1M, -+ .type = MT_DEVICE -+ }, -+}; -+ -+#define UCON S3C2410_UCON_DEFAULT -+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -+/* UFCON for the gta01 sets the FIFO trigger level at 4, not 8 */ -+#define UFCON_GTA01_PORT0 S3C2410_UFCON_FIFOMODE -+ -+static struct s3c2410_uartcfg gta01_uartcfgs[] = { -+ [0] = { -+ .hwport = 0, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON_GTA01_PORT0, -+ }, -+ [1] = { -+ .hwport = 1, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+}; -+ -+/* PMU driver info */ -+ -+static int pmu_callback(struct device *dev, unsigned int feature, -+ enum pmu_event event) -+{ -+ switch (feature) { -+ case PCF50606_FEAT_ACD: -+ switch (event) { -+ case PMU_EVT_INSERT: -+ pcf50606_charge_fast(pcf50606_global, 1); -+ break; -+ case PMU_EVT_REMOVE: -+ pcf50606_charge_fast(pcf50606_global, 0); -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+static struct pcf50606_platform_data gta01_pcf_pdata = { -+ .used_features = PCF50606_FEAT_EXTON | -+ PCF50606_FEAT_MBC | -+ PCF50606_FEAT_BBC | -+ PCF50606_FEAT_RTC | -+ PCF50606_FEAT_WDT | -+ PCF50606_FEAT_CHGCUR | -+ PCF50606_FEAT_BATVOLT | -+ PCF50606_FEAT_BATTEMP, -+ .onkey_seconds_required = 3, -+ .cb = &pmu_callback, -+ .r_fix_batt = 10000, -+ .r_fix_batt_par = 10000, -+ .r_sense_milli = 220, -+ .rails = { -+ [PCF50606_REGULATOR_D1REG] = { -+ .name = "bt_3v15", -+ .voltage = { -+ .init = 3150, -+ .max = 3150, -+ }, -+ }, -+ [PCF50606_REGULATOR_D2REG] = { -+ .name = "gl_2v5", -+ .voltage = { -+ .init = 2500, -+ .max = 2500, -+ }, -+ }, -+ [PCF50606_REGULATOR_D3REG] = { -+ .name = "stby_1v8", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 1800, -+ .max = 2100, -+ }, -+ }, -+ [PCF50606_REGULATOR_DCD] = { -+ .name = "gl_1v5", -+ .voltage = { -+ .init = 1500, -+ .max = 1500, -+ }, -+ }, -+ [PCF50606_REGULATOR_DCDE] = { -+ .name = "io_3v3", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 3300, -+ .max = 3330, -+ }, -+ }, -+ [PCF50606_REGULATOR_DCUD] = { -+ .name = "core_1v8", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 2100, -+ .max = 2100, -+ }, -+ }, -+ [PCF50606_REGULATOR_IOREG] = { -+ .name = "codec_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50606_REGULATOR_LPREG] = { -+ .name = "lcm_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ } -+ }, -+}; -+ -+static void cfg_pmu_vrail(struct pmu_voltage_rail *vrail, char *name, -+ unsigned int flags, unsigned int init, -+ unsigned int max) -+{ -+ vrail->name = name; -+ vrail->flags = flags; -+ vrail->voltage.init = init; -+ vrail->voltage.max = max; -+} -+ -+static void mangle_pmu_pdata_by_system_rev(void) -+{ -+ switch (system_rev) { -+ case GTA01Bv4_SYSTEM_REV: -+ gta01_pcf_pdata.used_features |= PCF50606_FEAT_ACD; -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG] -+ .name = "user1"; -+ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG] -+ .flags &= ~PMU_VRAIL_F_SUSPEND_ON; -+ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG] -+ .flags = PMU_VRAIL_F_UNUSED; -+ break; -+ case GTA01v4_SYSTEM_REV: -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCUD], -+ "core_1v8", PMU_VRAIL_F_SUSPEND_ON, 1800, 1800); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D1REG], -+ "vrf_3v", 0, 3000, 3000); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG], -+ "vtcxo_2v8", 0, 2800, 2800); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCD], -+ "gl_3v5", 0, 3500, 3500); -+ break; -+ case GTA01v3_SYSTEM_REV: -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D1REG], -+ "vrf_3v", 0, 3000, 3000); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D2REG], -+ "sd_3v3", 0, 3300, 3300); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG], -+ "codec_3v3", 0, 3300, 3300); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCD], -+ "gpsio_3v3", 0, 3300, 3300); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCUD], -+ "core_1v8", PMU_VRAIL_F_SUSPEND_ON, 1800, 1800); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_IOREG], -+ "vtcxo_2v8", 0, 2800, 2800); -+ break; -+ } -+} -+ -+static struct resource gta01_pmu_resources[] = { -+ [0] = { -+ .flags = IORESOURCE_IRQ, -+ .start = GTA01_IRQ_PCF50606, -+ .end = GTA01_IRQ_PCF50606, -+ }, -+}; -+ -+struct platform_device gta01_pmu_dev = { -+ .name = "pcf50606", -+ .num_resources = ARRAY_SIZE(gta01_pmu_resources), -+ .resource = gta01_pmu_resources, -+ .dev = { -+ .platform_data = >a01_pcf_pdata, -+ }, -+}; -+ -+/* LCD driver info */ -+ -+/* Configuration for 480x640 toppoly TD028TTEC1. -+ * Do not mark this as __initdata or it will break! */ -+static struct s3c2410fb_display gta01_displays[] = { -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 43, -+ .height = 58, -+ .xres = 480, -+ .yres = 640, -+ .bpp = 16, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 104, -+ .right_margin = 8, -+ .hsync_len = 8, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .vsync_len = 2, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVCLK | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME | -+ S3C2410_LCDCON5_PWREN | -+ S3C2410_LCDCON5_HWSWP, -+ }, -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 43, -+ .height = 58, -+ .xres = 480, -+ .yres = 640, -+ .bpp = 32, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 104, -+ .right_margin = 8, -+ .hsync_len = 8, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .vsync_len = 2, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVCLK | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME | -+ S3C2410_LCDCON5_PWREN | -+ S3C2410_LCDCON5_HWSWP, -+ }, -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 43, -+ .height = 58, -+ .xres = 240, -+ .yres = 320, -+ .bpp = 16, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 104, -+ .right_margin = 8, -+ .hsync_len = 8, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .vsync_len = 2, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVCLK | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME | -+ S3C2410_LCDCON5_PWREN | -+ S3C2410_LCDCON5_HWSWP, -+ }, -+}; -+ -+static struct s3c2410fb_mach_info gta01_lcd_cfg __initdata = { -+ .displays = gta01_displays, -+ .num_displays = ARRAY_SIZE(gta01_displays), -+ .default_display = 0, -+ -+ .lpcsel = ((0xCE6) & ~7) | 1<<4, -+}; -+ -+static struct platform_device *gta01_devices[] __initdata = { -+ &s3c_device_usb, -+ &s3c_device_lcd, -+ &s3c_device_wdt, -+ &s3c_device_i2c, -+ &s3c_device_iis, -+ &s3c_device_sdi, -+ &s3c_device_usbgadget, -+ &s3c_device_nand, -+ &s3c_device_ts, -+}; -+ -+static struct s3c2410_nand_set gta01_nand_sets[] = { -+ [0] = { -+ .name = "neo1973-nand", -+ .nr_chips = 1, -+ .flags = S3C2410_NAND_BBT, -+ }, -+}; -+ -+static struct s3c2410_platform_nand gta01_nand_info = { -+ .tacls = 20, -+ .twrph0 = 60, -+ .twrph1 = 20, -+ .nr_sets = ARRAY_SIZE(gta01_nand_sets), -+ .sets = gta01_nand_sets, -+}; -+ -+static void gta01_mmc_set_power(unsigned char power_mode, unsigned short vdd) -+{ -+ int bit; -+ int mv = 1700; /* 1.7V for MMC_VDD_165_195 */ -+ -+ printk(KERN_DEBUG "mmc_set_power(power_mode=%u, vdd=%u)\n", -+ power_mode, vdd); -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ switch (power_mode) { -+ case MMC_POWER_OFF: -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_D2REG, 0); -+ break; -+ case MMC_POWER_ON: -+ /* translate MMC_VDD_* VDD bit to mv */ -+ for (bit = 8; bit != 24; bit++) -+ if (vdd == (1 << bit)) -+ mv += 100 * (bit - 4); -+ pcf50606_voltage_set(pcf50606_global, -+ PCF50606_REGULATOR_D2REG, mv); -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_D2REG, 1); -+ break; -+ } -+ break; -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ switch (power_mode) { -+ case MMC_POWER_OFF: -+ neo1973_gpb_setpin(GTA01_GPIO_SDMMC_ON, 1); -+ break; -+ case MMC_POWER_ON: -+ neo1973_gpb_setpin(GTA01_GPIO_SDMMC_ON, 0); -+ break; -+ } -+ break; -+ } -+} -+ -+static int gta01_mmc_use_slow(void) -+{ -+ return neo1973_pm_gps_is_on(); -+} -+ -+static struct s3c24xx_mci_pdata gta01_mmc_cfg = { -+ .gpio_detect = GTA01_GPIO_nSD_DETECT, -+ .set_power = >a01_mmc_set_power, -+ .use_slow = >a01_mmc_use_slow, -+ .ocr_avail = MMC_VDD_165_195|MMC_VDD_20_21| -+ MMC_VDD_21_22|MMC_VDD_22_23|MMC_VDD_23_24| -+ MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| -+ MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| -+ MMC_VDD_30_31|MMC_VDD_31_32|MMC_VDD_32_33, -+}; -+ -+static void gta01_udc_command(enum s3c2410_udc_cmd_e cmd) -+{ -+ printk(KERN_DEBUG "%s(%d)\n", __func__, cmd); -+ -+ switch (cmd) { -+ case S3C2410_UDC_P_ENABLE: -+ neo1973_gpb_setpin(GTA01_GPIO_USB_PULLUP, 1); -+ break; -+ case S3C2410_UDC_P_DISABLE: -+ neo1973_gpb_setpin(GTA01_GPIO_USB_PULLUP, 0); -+ break; -+ default: -+ break; -+ } -+} -+ -+/* use a work queue, since I2C API inherently schedules -+ * and we get called in hardirq context from UDC driver */ -+ -+struct vbus_draw { -+ struct work_struct work; -+ int ma; -+}; -+static struct vbus_draw gta01_udc_vbus_drawer; -+ -+static void __gta01_udc_vbus_draw(struct work_struct *work) -+{ -+ /* this is a fix to work around boot-time ordering problems if the -+ * s3c2410_udc is initialized before the pcf50606 driver has defined -+ * pcf50606_global */ -+ if (!pcf50606_global) -+ return; -+ -+ if (gta01_udc_vbus_drawer.ma >= 500) { -+ /* enable fast charge */ -+ printk(KERN_DEBUG "udc: enabling fast charge\n"); -+ pcf50606_charge_fast(pcf50606_global, 1); -+ } else { -+ /* disable fast charge */ -+ printk(KERN_DEBUG "udc: disabling fast charge\n"); -+ pcf50606_charge_fast(pcf50606_global, 0); -+ } -+} -+ -+static void gta01_udc_vbus_draw(unsigned int ma) -+{ -+ gta01_udc_vbus_drawer.ma = ma; -+ schedule_work(>a01_udc_vbus_drawer.work); -+} -+ -+static struct s3c2410_udc_mach_info gta01_udc_cfg = { -+ .vbus_draw = gta01_udc_vbus_draw, -+}; -+ -+static struct s3c2410_ts_mach_info gta01_ts_cfg = { -+ .delay = 10000, -+ .presc = 50000000 / 1000000, /* 50 MHz PCLK / 1MHz */ -+ /* simple averaging, 2^n samples */ -+ .oversampling_shift = 5, -+ /* averaging filter length, 2^n */ -+ .excursion_filter_len_bits = 5, -+ /* flagged for beauty contest on next sample if differs from -+ * average more than this -+ */ -+ .reject_threshold_vs_avg = 2, -+}; -+ -+/* SPI */ -+ -+static void gta01_jbt6k74_reset(int devidx, int level) -+{ -+ /* empty place holder; gta01 does not yet use this */ -+ printk(KERN_DEBUG "gta01_jbt6k74_reset\n"); -+} -+ -+static void gta01_jbt6k74_resuming(int devidx) -+{ -+ gta01bl_deferred_resume(); -+} -+ -+const struct jbt6k74_platform_data gta01_jbt6k74_pdata = { -+ .reset = gta01_jbt6k74_reset, -+ .resuming = gta01_jbt6k74_resuming, -+}; -+ -+static struct spi_board_info gta01_spi_board_info[] = { -+ { -+ .modalias = "jbt6k74", -+ .platform_data = >a01_jbt6k74_pdata, -+ /* controller_data */ -+ /* irq */ -+ .max_speed_hz = 10 * 1000 * 1000, -+ .bus_num = 1, -+ /* chip_select */ -+ }, -+}; -+ -+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int csidx, int cs) -+{ -+ switch (cs) { -+ case BITBANG_CS_ACTIVE: -+ s3c2410_gpio_setpin(S3C2410_GPG3, 0); -+ break; -+ case BITBANG_CS_INACTIVE: -+ s3c2410_gpio_setpin(S3C2410_GPG3, 1); -+ break; -+ } -+} -+ -+static struct s3c2410_spigpio_info spi_gpio_cfg = { -+ .pin_clk = S3C2410_GPG7, -+ .pin_mosi = S3C2410_GPG6, -+ .pin_miso = S3C2410_GPG5, -+ .board_size = ARRAY_SIZE(gta01_spi_board_info), -+ .board_info = gta01_spi_board_info, -+ .chip_select = &spi_gpio_cs, -+ .num_chipselect = 2, /*** Should be 1 or 2 for gta01? ***/ -+}; -+ -+static struct resource s3c_spi_lcm_resource[] = { -+ [0] = { -+ .start = S3C2410_GPG3, -+ .end = S3C2410_GPG3, -+ }, -+ [1] = { -+ .start = S3C2410_GPG5, -+ .end = S3C2410_GPG5, -+ }, -+ [2] = { -+ .start = S3C2410_GPG6, -+ .end = S3C2410_GPG6, -+ }, -+ [3] = { -+ .start = S3C2410_GPG7, -+ .end = S3C2410_GPG7, -+ }, -+}; -+ -+struct platform_device s3c_device_spi_lcm = { -+ .name = "spi_s3c24xx_gpio", -+ .id = 1, -+ .num_resources = ARRAY_SIZE(s3c_spi_lcm_resource), -+ .resource = s3c_spi_lcm_resource, -+ .dev = { -+ .platform_data = &spi_gpio_cfg, -+ }, -+}; -+ -+static struct gta01bl_machinfo backlight_machinfo = { -+ .default_intensity = 1, -+ .max_intensity = 1, -+ .limit_mask = 1, -+ .defer_resume_backlight = 1, -+}; -+ -+static struct resource gta01_bl_resources[] = { -+ [0] = { -+ .start = GTA01_GPIO_BACKLIGHT, -+ .end = GTA01_GPIO_BACKLIGHT, -+ }, -+}; -+ -+struct platform_device gta01_bl_dev = { -+ .name = "gta01-bl", -+ .num_resources = ARRAY_SIZE(gta01_bl_resources), -+ .resource = gta01_bl_resources, -+ .dev = { -+ .platform_data = &backlight_machinfo, -+ }, -+}; -+ -+static struct resource gta01_led_resources[] = { -+ [0] = { -+ .start = GTA01_GPIO_VIBRATOR_ON, -+ .end = GTA01_GPIO_VIBRATOR_ON, -+ }, -+}; -+ -+struct platform_device gta01_led_dev = { -+ .name = "neo1973-vibrator", -+ .num_resources = ARRAY_SIZE(gta01_led_resources), -+ .resource = gta01_led_resources, -+}; -+ -+static struct resource gta01_button_resources[] = { -+ [0] = { -+ .start = GTA01_GPIO_AUX_KEY, -+ .end = GTA01_GPIO_AUX_KEY, -+ }, -+ [1] = { -+ .start = GTA01_GPIO_HOLD_KEY, -+ .end = GTA01_GPIO_HOLD_KEY, -+ }, -+ [2] = { -+ .start = GTA01_GPIO_JACK_INSERT, -+ .end = GTA01_GPIO_JACK_INSERT, -+ }, -+}; -+ -+struct platform_device gta01_button_dev = { -+ .name = "neo1973-button", -+ .num_resources = ARRAY_SIZE(gta01_button_resources), -+ .resource = gta01_button_resources, -+}; -+ -+static struct platform_device gta01_pm_gsm_dev = { -+ .name = "neo1973-pm-gsm", -+}; -+ -+/* USB */ -+static struct s3c2410_hcd_info gta01_usb_info = { -+ .port[0] = { -+ .flags = S3C_HCDFLG_USED, -+ }, -+ .port[1] = { -+ .flags = 0, -+ }, -+}; -+ -+static void __init gta01_map_io(void) -+{ -+ s3c24xx_init_io(gta01_iodesc, ARRAY_SIZE(gta01_iodesc)); -+ s3c24xx_init_clocks(12*1000*1000); -+ s3c24xx_init_uarts(gta01_uartcfgs, ARRAY_SIZE(gta01_uartcfgs)); -+} -+ -+static irqreturn_t gta01_modem_irq(int irq, void *param) -+{ -+ printk(KERN_DEBUG "GSM wakeup interrupt (IRQ %d)\n", irq); -+ gta_gsm_interrupts++; -+ return IRQ_HANDLED; -+} -+ -+static void __init gta01_machine_init(void) -+{ -+ int rc; -+ -+ if (system_rev == GTA01v4_SYSTEM_REV || -+ system_rev == GTA01Bv2_SYSTEM_REV || -+ system_rev == GTA01Bv3_SYSTEM_REV || -+ system_rev == GTA01Bv4_SYSTEM_REV) { -+ gta01_udc_cfg.udc_command = gta01_udc_command; -+ gta01_mmc_cfg.ocr_avail = MMC_VDD_32_33; -+ } -+ -+ s3c_device_usb.dev.platform_data = >a01_usb_info; -+ s3c_device_nand.dev.platform_data = >a01_nand_info; -+ s3c_device_sdi.dev.platform_data = >a01_mmc_cfg; -+ -+ s3c24xx_fb_set_platdata(>a01_lcd_cfg); -+ -+ INIT_WORK(>a01_udc_vbus_drawer.work, __gta01_udc_vbus_draw); -+ s3c24xx_udc_set_platdata(>a01_udc_cfg); -+ set_s3c2410ts_info(>a01_ts_cfg); -+ -+ /* Set LCD_RESET / XRES to high */ -+ s3c2410_gpio_cfgpin(S3C2410_GPC6, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_setpin(S3C2410_GPC6, 1); -+ -+ /* SPI chip select is gpio output */ -+ s3c2410_gpio_cfgpin(S3C2410_GPG3, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_setpin(S3C2410_GPG3, 1); -+ platform_device_register(&s3c_device_spi_lcm); -+ -+ platform_device_register(>a01_bl_dev); -+ platform_device_register(>a01_button_dev); -+ platform_device_register(>a01_pm_gsm_dev); -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ /* just use the default (GTA01_IRQ_PCF50606) */ -+ break; -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ /* just use the default (GTA01_IRQ_PCF50606) */ -+ gta01_led_resources[0].start = -+ gta01_led_resources[0].end = GTA01Bv2_GPIO_VIBRATOR_ON; -+ break; -+ case GTA01Bv4_SYSTEM_REV: -+ gta01_pmu_resources[0].start = -+ gta01_pmu_resources[0].end = GTA01Bv4_IRQ_PCF50606; -+ gta01_led_resources[0].start = -+ gta01_led_resources[0].end = GTA01Bv4_GPIO_VIBRATOR_ON; -+ break; -+ } -+ mangle_pmu_pdata_by_system_rev(); -+ platform_device_register(>a01_pmu_dev); -+ platform_device_register(>a01_led_dev); -+ -+ platform_add_devices(gta01_devices, ARRAY_SIZE(gta01_devices)); -+ -+ s3c2410_pm_init(); -+ -+ set_irq_type(GTA01_IRQ_MODEM, IRQT_RISING); -+ rc = request_irq(GTA01_IRQ_MODEM, gta01_modem_irq, IRQF_DISABLED, -+ "modem", NULL); -+ enable_irq_wake(GTA01_IRQ_MODEM); -+ printk(KERN_DEBUG "Enabled GSM wakeup IRQ %d (rc=%d)\n", -+ GTA01_IRQ_MODEM, rc); -+} -+ -+MACHINE_START(NEO1973_GTA01, "GTA01") -+ .phys_io = S3C2410_PA_UART, -+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, -+ .boot_params = S3C2410_SDRAM_PA + 0x100, -+ .map_io = gta01_map_io, -+ .init_irq = s3c24xx_init_irq, -+ .init_machine = gta01_machine_init, -+ .timer = &s3c24xx_timer, -+MACHINE_END -Index: linux-2.6.24.7/arch/arm/mach-s3c2410/mach-h1940.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2410/mach-h1940.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2410/mach-h1940.c 2008-12-11 22:46:48.000000000 +0100 -@@ -38,6 +38,7 @@ - #include - #include - #include -+#include - #include - - #include -@@ -129,6 +130,11 @@ static struct s3c2410_udc_mach_info h194 - .vbus_pin_inverted = 1, - }; - -+static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { -+ .delay = 10000, -+ .presc = 49, -+ .oversampling_shift = 2, -+}; - - /** - * Set lcd on or off -@@ -186,6 +192,7 @@ static struct platform_device *h1940_dev - &s3c_device_i2c, - &s3c_device_iis, - &s3c_device_usbgadget, -+ &s3c_device_ts, - &s3c_device_leds, - &s3c_device_bluetooth, - }; -@@ -214,6 +221,7 @@ static void __init h1940_init(void) - u32 tmp; - - s3c24xx_fb_set_platdata(&h1940_fb_info); -+ set_s3c2410ts_info(&h1940_ts_cfg); - s3c24xx_udc_set_platdata(&h1940_udc_cfg); - - /* Turn off suspend on both USB ports, and switch the -Index: linux-2.6.24.7/arch/arm/mach-s3c2410/mach-qt2410.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2410/mach-qt2410.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2410/mach-qt2410.c 2008-12-11 22:46:48.000000000 +0100 -@@ -1,6 +1,6 @@ - /* linux/arch/arm/mach-s3c2410/mach-qt2410.c - * -- * Copyright (C) 2006 by OpenMoko, Inc. -+ * Copyright (C) 2006 by Openmoko, Inc. - * Author: Harald Welte - * All rights reserved. - * -@@ -214,7 +214,7 @@ static struct platform_device qt2410_led - - /* SPI */ - --static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) -+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int csidx, int cs) - { - switch (cs) { - case BITBANG_CS_ACTIVE: -@@ -321,6 +321,24 @@ static int __init qt2410_tft_setup(char - - __setup("tft=", qt2410_tft_setup); - -+static struct resource qt2410_button_resources[] = { -+ [0] = { -+ .start = S3C2410_GPF0, -+ .end = S3C2410_GPF0, -+ }, -+ [1] = { -+ .start = S3C2410_GPF2, -+ .end = S3C2410_GPF2, -+ }, -+}; -+ -+struct platform_device qt2410_button_dev = { -+ .name ="qt2410-button", -+ .num_resources = ARRAY_SIZE(qt2410_button_resources), -+ .resource = qt2410_button_resources, -+}; -+ -+ - static void __init qt2410_map_io(void) - { - s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); -Index: linux-2.6.24.7/arch/arm/mach-s3c2410/Makefile -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2410/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2410/Makefile 2008-12-11 22:46:48.000000000 +0100 -@@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o - obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o - obj-$(CONFIG_S3C2410_GPIO) += gpio.o - obj-$(CONFIG_S3C2410_CLOCK) += clock.o -+obj-$(CONFIG_S3C2410_PWM) += pwm.o - - # Machine support - -@@ -29,3 +30,4 @@ obj-$(CONFIG_MACH_AML_M5900) += mach-aml - obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o - obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o - obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o -+obj-$(CONFIG_MACH_NEO1973_GTA01)+= mach-gta01.o -Index: linux-2.6.24.7/arch/arm/mach-s3c2410/pwm.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2410/pwm.c 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,277 @@ -+/* -+ * arch/arm/mach-s3c2410/3c2410-pwm.c -+ * -+ * Copyright (c) by Javi Roman -+ * for the Openmoko Project. -+ * -+ * S3C2410A SoC PWM support -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_PM -+ static unsigned long standby_reg_tcon; -+ static unsigned long standby_reg_tcfg0; -+ static unsigned long standby_reg_tcfg1; -+#endif -+ -+int s3c2410_pwm_disable(struct s3c2410_pwm *pwm) -+{ -+ unsigned long tcon; -+ -+ /* stop timer */ -+ tcon = __raw_readl(S3C2410_TCON); -+ tcon &= 0xffffff00; -+ __raw_writel(tcon, S3C2410_TCON); -+ -+ clk_disable(pwm->pclk); -+ clk_put(pwm->pclk); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_disable); -+ -+int s3c2410_pwm_init(struct s3c2410_pwm *pwm) -+{ -+ pwm->pclk = clk_get(NULL, "timers"); -+ if (IS_ERR(pwm->pclk)) -+ return PTR_ERR(pwm->pclk); -+ -+ clk_enable(pwm->pclk); -+ pwm->pclk_rate = clk_get_rate(pwm->pclk); -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_init); -+ -+int s3c2410_pwm_enable(struct s3c2410_pwm *pwm) -+{ -+ unsigned long tcfg0, tcfg1, tcnt, tcmp; -+ -+ /* control registers bits */ -+ tcfg1 = __raw_readl(S3C2410_TCFG1); -+ tcfg0 = __raw_readl(S3C2410_TCFG0); -+ -+ /* divider & scaler slection */ -+ switch (pwm->timerid) { -+ case PWM0: -+ tcfg1 &= ~S3C2410_TCFG1_MUX0_MASK; -+ tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK; -+ break; -+ case PWM1: -+ tcfg1 &= ~S3C2410_TCFG1_MUX1_MASK; -+ tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK; -+ break; -+ case PWM2: -+ tcfg1 &= ~S3C2410_TCFG1_MUX2_MASK; -+ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; -+ break; -+ case PWM3: -+ tcfg1 &= ~S3C2410_TCFG1_MUX3_MASK; -+ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; -+ break; -+ case PWM4: -+ /* timer four is not capable of doing PWM */ -+ break; -+ default: -+ clk_disable(pwm->pclk); -+ clk_put(pwm->pclk); -+ return -1; -+ } -+ -+ /* divider & scaler values */ -+ tcfg1 |= pwm->divider; -+ __raw_writel(tcfg1, S3C2410_TCFG1); -+ -+ switch (pwm->timerid) { -+ case PWM0: -+ case PWM1: -+ tcfg0 |= pwm->prescaler; -+ __raw_writel(tcfg0, S3C2410_TCFG0); -+ break; -+ default: -+ if ((tcfg0 | pwm->prescaler) != tcfg0) { -+ printk(KERN_WARNING "not changing prescaler of PWM %u," -+ " since it's shared with timer4 (clock tick)\n", -+ pwm->timerid); -+ } -+ break; -+ } -+ -+ /* timer count and compare buffer initial values */ -+ tcnt = pwm->counter; -+ tcmp = pwm->comparer; -+ -+ __raw_writel(tcnt, S3C2410_TCNTB(pwm->timerid)); -+ __raw_writel(tcmp, S3C2410_TCMPB(pwm->timerid)); -+ -+ /* ensure timer is stopped */ -+ s3c2410_pwm_stop(pwm); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_enable); -+ -+int s3c2410_pwm_start(struct s3c2410_pwm *pwm) -+{ -+ unsigned long tcon; -+ -+ tcon = __raw_readl(S3C2410_TCON); -+ -+ switch (pwm->timerid) { -+ case PWM0: -+ tcon |= S3C2410_TCON_T0START; -+ tcon &= ~S3C2410_TCON_T0MANUALUPD; -+ break; -+ case PWM1: -+ tcon |= S3C2410_TCON_T1START; -+ tcon &= ~S3C2410_TCON_T1MANUALUPD; -+ break; -+ case PWM2: -+ tcon |= S3C2410_TCON_T2START; -+ tcon &= ~S3C2410_TCON_T2MANUALUPD; -+ break; -+ case PWM3: -+ tcon |= S3C2410_TCON_T3START; -+ tcon &= ~S3C2410_TCON_T3MANUALUPD; -+ break; -+ case PWM4: -+ /* timer four is not capable of doing PWM */ -+ default: -+ return -ENODEV; -+ } -+ -+ __raw_writel(tcon, S3C2410_TCON); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_start); -+ -+int s3c2410_pwm_stop(struct s3c2410_pwm *pwm) -+{ -+ unsigned long tcon; -+ -+ tcon = __raw_readl(S3C2410_TCON); -+ -+ switch (pwm->timerid) { -+ case PWM0: -+ tcon &= ~0x00000000; -+ tcon |= S3C2410_TCON_T0RELOAD; -+ tcon |= S3C2410_TCON_T0MANUALUPD; -+ break; -+ case PWM1: -+ tcon &= ~0x00000080; -+ tcon |= S3C2410_TCON_T1RELOAD; -+ tcon |= S3C2410_TCON_T1MANUALUPD; -+ break; -+ case PWM2: -+ tcon &= ~0x00000800; -+ tcon |= S3C2410_TCON_T2RELOAD; -+ tcon |= S3C2410_TCON_T2MANUALUPD; -+ break; -+ case PWM3: -+ tcon &= ~0x00008000; -+ tcon |= S3C2410_TCON_T3RELOAD; -+ tcon |= S3C2410_TCON_T3MANUALUPD; -+ break; -+ case PWM4: -+ /* timer four is not capable of doing PWM */ -+ default: -+ return -ENODEV; -+ } -+ -+ __raw_writel(tcon, S3C2410_TCON); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_stop); -+ -+int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *pwm) -+{ -+ __raw_writel(reg_value, S3C2410_TCMPB(pwm->timerid)); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_duty_cycle); -+ -+int s3c2410_pwm_dumpregs(void) -+{ -+ printk(KERN_INFO "TCON: %08lx, TCFG0: %08lx, TCFG1: %08lx\n", -+ (unsigned long) __raw_readl(S3C2410_TCON), -+ (unsigned long) __raw_readl(S3C2410_TCFG0), -+ (unsigned long) __raw_readl(S3C2410_TCFG1)); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_dumpregs); -+ -+static int __init s3c24xx_pwm_probe(struct platform_device *pdev) -+{ -+ dev_info(&pdev->dev, "s3c24xx_pwm is registered \n"); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int s3c24xx_pwm_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ /* PWM config should be kept in suspending */ -+ standby_reg_tcon = __raw_readl(S3C2410_TCON); -+ standby_reg_tcfg0 = __raw_readl(S3C2410_TCFG0); -+ standby_reg_tcfg1 = __raw_readl(S3C2410_TCFG1); -+ -+ return 0; -+} -+ -+static int s3c24xx_pwm_resume(struct platform_device *pdev) -+{ -+ __raw_writel(standby_reg_tcon, S3C2410_TCON); -+ __raw_writel(standby_reg_tcfg0, S3C2410_TCFG0); -+ __raw_writel(standby_reg_tcfg1, S3C2410_TCFG1); -+ -+ return 0; -+} -+#else -+#define sc32440_pwm_suspend NULL -+#define sc32440_pwm_resume NULL -+#endif -+ -+static struct platform_driver s3c24xx_pwm_driver = { -+ .driver = { -+ .name = "s3c24xx_pwm", -+ .owner = THIS_MODULE, -+ }, -+ .probe = s3c24xx_pwm_probe, -+ .suspend = s3c24xx_pwm_suspend, -+ .resume = s3c24xx_pwm_resume, -+}; -+ -+static int __init s3c24xx_pwm_init(void) -+{ -+ return platform_driver_register(&s3c24xx_pwm_driver); -+} -+ -+static void __exit s3c24xx_pwm_exit(void) -+{ -+} -+ -+MODULE_AUTHOR("Javi Roman "); -+MODULE_LICENSE("GPL"); -+ -+module_init(s3c24xx_pwm_init); -+module_exit(s3c24xx_pwm_exit); -Index: linux-2.6.24.7/arch/arm/mach-s3c2412/s3c2412.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2412/s3c2412.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2412/s3c2412.c 2008-12-11 22:46:48.000000000 +0100 -@@ -214,5 +214,8 @@ int __init s3c2412_init(void) - { - printk("S3C2412: Initialising architecture\n"); - -+ /* make sure SD/MMC driver can distinguish 2412 from 2410 */ -+ s3c_device_sdi.name = "s3c2412-sdi"; -+ - return sysdev_register(&s3c2412_sysdev); - } -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/bits.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/bits.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,48 @@ -+/* -+ * Copyright (C) Samsung Electroincs 2003 -+ * Author: SW.LEE -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+ -+#ifndef __SW_BITS_H -+#define __SW_BITS_H -+ -+#define BIT0 0x00000001 -+#define BIT1 0x00000002 -+#define BIT2 0x00000004 -+#define BIT3 0x00000008 -+#define BIT4 0x00000010 -+#define BIT5 0x00000020 -+#define BIT6 0x00000040 -+#define BIT7 0x00000080 -+#define BIT8 0x00000100 -+#define BIT9 0x00000200 -+#define BIT10 0x00000400 -+#define BIT11 0x00000800 -+#define BIT12 0x00001000 -+#define BIT13 0x00002000 -+#define BIT14 0x00004000 -+#define BIT15 0x00008000 -+#define BIT16 0x00010000 -+#define BIT17 0x00020000 -+#define BIT18 0x00040000 -+#define BIT19 0x00080000 -+#define BIT20 0x00100000 -+#define BIT21 0x00200000 -+#define BIT22 0x00400000 -+#define BIT23 0x00800000 -+#define BIT24 0x01000000 -+#define BIT25 0x02000000 -+#define BIT26 0x04000000 -+#define BIT27 0x08000000 -+#define BIT28 0x10000000 -+#define BIT29 0x20000000 -+#define BIT30 0x40000000 -+#define BIT31 0x80000000 -+ -+#endif -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/camif.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/camif.c 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,1047 @@ -+/* -+ * Copyright (C) 2004 Samsung Electronics -+ * SW.LEE -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_ARCH_S3C24A0A -+#include -+#include -+#else -+#include -+#include -+#include -+#endif -+ -+#include "cam_reg.h" -+//#define SW_DEBUG -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "miscdevice.h" -+ -+static int camif_dma_burst(camif_cfg_t *); -+static int camif_scaler(camif_cfg_t *); -+ -+/* For SXGA Image */ -+#define RESERVE_MEM 15*1024*1024 -+#define YUV_MEM 10*1024*1024 -+#define RGB_MEM (RESERVE_MEM - YUV_MEM) -+ -+static int camif_malloc(camif_cfg_t *cfg) -+{ -+ unsigned int t_size; -+ unsigned int daon = cfg->target_x *cfg->target_y; -+ -+ if(cfg->dma_type & CAMIF_CODEC) { -+ if (cfg->fmt & CAMIF_OUT_YCBCR420) { -+ t_size = daon * 3 / 2 ; -+ } -+ else { t_size = daon * 2; /* CAMIF_OUT_YCBCR422 */ } -+ t_size = t_size *cfg->pp_num; -+ -+#ifndef SAMSUNG_SXGA_CAM -+ cfg->pp_virt_buf = dma_alloc_coherent(cfg->v->dev, -+ t_size, &cfg->pp_phys_buf, -+ GFP_KERNEL); -+#else -+ printk(KERN_INFO "Reserving High RAM Addresses \n"); -+ cfg->pp_phys_buf = PHYS_OFFSET + (MEM_SIZE - RESERVE_MEM); -+ cfg->pp_virt_buf = ioremap_nocache(cfg->pp_phys_buf, YUV_MEM); -+#endif -+ -+ if ( !cfg->pp_virt_buf ) { -+ printk(KERN_ERR"CAMERA:Failed to request YCBCR MEM\n"); -+ return -ENOMEM; -+ } -+ memset(cfg->pp_virt_buf, 0, t_size); -+ cfg->pp_totalsize = t_size; -+ return 0; -+ } -+ if ( cfg->dma_type & CAMIF_PREVIEW ) { -+ if (cfg->fmt & CAMIF_RGB16) -+ t_size = daon * 2; /* 4byte per two pixel*/ -+ else { -+ assert(cfg->fmt & CAMIF_RGB24); -+ t_size = daon * 4; /* 4byte per one pixel */ -+ } -+ t_size = t_size * cfg->pp_num; -+#ifndef SAMSUNG_SXGA_CAM -+ cfg->pp_virt_buf = dma_alloc_coherent(cfg->v->dev, -+ t_size, &cfg->pp_phys_buf, -+ GFP_KERNEL); -+#else -+ printk(KERN_INFO "Reserving High RAM Addresses \n"); -+ cfg->pp_phys_buf = PHYS_OFFSET + (MEM_SIZE - RESERVE_MEM ) + YUV_MEM; -+ cfg->pp_virt_buf = ioremap_nocache(cfg->pp_phys_buf,RGB_MEM); -+#endif -+ if ( !cfg->pp_virt_buf ) { -+ printk(KERN_ERR"CAMERA:Failed to request RGB MEM\n"); -+ return -ENOMEM; -+ } -+ memset(cfg->pp_virt_buf, 0, t_size); -+ cfg->pp_totalsize = t_size; -+ return 0; -+ } -+ -+ return 0; /* Never come. */ -+} -+ -+static int camif_demalloc(camif_cfg_t *cfg) -+{ -+#ifndef SAMSUNG_SXGA_CAM -+ if ( cfg->pp_virt_buf ) { -+ dma_free_coherent(cfg->v->dev, cfg->pp_totalsize, -+ cfg->pp_virt_buf, cfg->pp_phys_buf); -+ cfg->pp_virt_buf = 0; -+ } -+#else -+ iounmap(cfg->pp_virt_buf); -+ cfg->pp_virt_buf = 0; -+#endif -+ return 0; -+} -+ -+/* -+ * advise a person to use this func in ISR -+ * index value indicates the next frame count to be used -+ */ -+int camif_g_frame_num(camif_cfg_t *cfg) -+{ -+ int index = 0; -+ -+ if (cfg->dma_type & CAMIF_CODEC ) { -+ index = FRAME_CNT(readl(camregs + S3C2440_CAM_REG_CICOSTATUS)); -+ DPRINTK("CAMIF_CODEC frame %d \n", index); -+ } -+ else { -+ assert(cfg->dma_type & CAMIF_PREVIEW ); -+ index = FRAME_CNT(readl(camregs + S3C2440_CAM_REG_CIPRSTATUS)); -+ DPRINTK("CAMIF_PREVIEW frame %d 0x%08X \n", index, -+ readl(camregs + S3C2440_CAM_REG_CIPRSTATUS)); -+ } -+ cfg->now_frame_num = (index + 2) % 4; /* When 4 PingPong */ -+ return index; /* meaningless */ -+} -+ -+static int camif_pp_codec(camif_cfg_t *cfg) -+{ -+ u32 i, c_size; /* Cb,Cr size */ -+ u32 one_p_size; -+ u32 daon = cfg->target_x * cfg->target_y; -+ if (cfg->fmt & CAMIF_OUT_YCBCR420) -+ c_size = daon / 4; -+ else { -+ assert(cfg->fmt & CAMIF_OUT_YCBCR422); -+ c_size = daon / 2; -+ } -+ switch ( cfg->pp_num ) { -+ case 1 : -+ for (i =0 ; i < 4; i++) { -+ cfg->img_buf[i].virt_y = cfg->pp_virt_buf; -+ cfg->img_buf[i].phys_y = cfg->pp_phys_buf; -+ cfg->img_buf[i].virt_cb = cfg->pp_virt_buf + daon; -+ cfg->img_buf[i].phys_cb = cfg->pp_phys_buf + daon; -+ cfg->img_buf[i].virt_cr = cfg->pp_virt_buf + daon + c_size; -+ cfg->img_buf[i].phys_cr = cfg->pp_phys_buf + daon + c_size; -+ writel(cfg->img_buf[i].phys_y, camregs + S3C2440_CAM_REG_CICOYSA(i)); -+ writel(cfg->img_buf[i].phys_cb, camregs + S3C2440_CAM_REG_CICOCBSA(i)); -+ writel(cfg->img_buf[i].phys_cr, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ case 2: -+#define TRY (( i%2 ) ? 1 :0) -+ one_p_size = daon + 2*c_size; -+ for (i = 0; i < 4 ; i++) { -+ cfg->img_buf[i].virt_y = cfg->pp_virt_buf + TRY * one_p_size; -+ cfg->img_buf[i].phys_y = cfg->pp_phys_buf + TRY * one_p_size; -+ cfg->img_buf[i].virt_cb = cfg->pp_virt_buf + daon + TRY * one_p_size; -+ cfg->img_buf[i].phys_cb = cfg->pp_phys_buf + daon + TRY * one_p_size; -+ cfg->img_buf[i].virt_cr = cfg->pp_virt_buf + daon + c_size + TRY * one_p_size; -+ cfg->img_buf[i].phys_cr = cfg->pp_phys_buf + daon + c_size + TRY * one_p_size; -+ writel(cfg->img_buf[i].phys_y, camregs + S3C2440_CAM_REG_CICOYSA(i)); -+ writel(cfg->img_buf[i].phys_cb, camregs + S3C2440_CAM_REG_CICOCBSA(i)); -+ writel(cfg->img_buf[i].phys_cr, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ case 4: -+ one_p_size = daon + 2*c_size; -+ for (i = 0; i < 4 ; i++) { -+ cfg->img_buf[i].virt_y = cfg->pp_virt_buf + i * one_p_size; -+ cfg->img_buf[i].phys_y = cfg->pp_phys_buf + i * one_p_size; -+ cfg->img_buf[i].virt_cb = cfg->pp_virt_buf + daon + i * one_p_size; -+ cfg->img_buf[i].phys_cb = cfg->pp_phys_buf + daon + i * one_p_size; -+ cfg->img_buf[i].virt_cr = cfg->pp_virt_buf + daon + c_size + i * one_p_size; -+ cfg->img_buf[i].phys_cr = cfg->pp_phys_buf + daon + c_size + i * one_p_size; -+ writel(cfg->img_buf[i].phys_y, camregs + S3C2440_CAM_REG_CICOYSA(i)); -+ writel(cfg->img_buf[i].phys_cb, camregs + S3C2440_CAM_REG_CICOCBSA(i)); -+ writel(cfg->img_buf[i].phys_cr, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ default: -+ printk("Invalid PingPong Number %d \n",cfg->pp_num); -+ panic("halt\n"); -+} -+ return 0; -+} -+ -+/* RGB Buffer Allocation */ -+static int camif_pp_preview(camif_cfg_t *cfg) -+{ -+ int i; -+ u32 daon = cfg->target_x * cfg->target_y; -+ -+ if(cfg->fmt & CAMIF_RGB24) -+ daon = daon * 4 ; -+ else { -+ assert (cfg->fmt & CAMIF_RGB16); -+ daon = daon *2; -+ } -+ switch ( cfg->pp_num ) { -+ case 1: -+ for ( i = 0; i < 4 ; i++ ) { -+ cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf ; -+ cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf ; -+ writel(cfg->img_buf[i].phys_rgb, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ case 2: -+ for ( i = 0; i < 4 ; i++) { -+ cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf + TRY * daon; -+ cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf + TRY * daon; -+ writel(cfg->img_buf[i].phys_rgb, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ case 4: -+ for ( i = 0; i < 4 ; i++) { -+ cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf + i * daon; -+ cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf + i * daon; -+ writel(cfg->img_buf[i].phys_rgb, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ default: -+ printk("Invalid PingPong Number %d \n",cfg->pp_num); -+ panic("halt\n"); -+ } -+ return 0; -+} -+ -+static int camif_pingpong(camif_cfg_t *cfg) -+{ -+ if (cfg->dma_type & CAMIF_CODEC ) { -+ camif_pp_codec(cfg); -+ } -+ -+ if ( cfg->dma_type & CAMIF_PREVIEW) { -+ camif_pp_preview(cfg); -+ } -+ return 0; -+} -+ -+ -+/*********** Image Convert *******************************/ -+/* Return Format -+ * Supported by Hardware -+ * V4L2_PIX_FMT_YUV420, -+ * V4L2_PIX_FMT_YUV422P, -+ * V4L2_PIX_FMT_BGR32 (BGR4) -+ * ----------------------------------- -+ * V4L2_PIX_FMT_RGB565(X) -+ * Currenly 2byte --> BGR656 Format -+ * S3C2440A,S3C24A0 supports vairants with reversed FMT_RGB565 -+ i.e blue toward the least, red towards the most significant bit -+ -- by SW.LEE -+ */ -+ -+ -+/* -+ * After calling camif_g_frame_num, -+ * this func must be called -+ */ -+u8 * camif_g_frame(camif_cfg_t *cfg) -+{ -+ u8 * ret = NULL; -+ int cnt = cfg->now_frame_num; -+ -+ if(cfg->dma_type & CAMIF_PREVIEW) { -+ ret = cfg->img_buf[cnt].virt_rgb; -+ } -+ if (cfg->dma_type & CAMIF_CODEC) { -+ ret = cfg->img_buf[cnt].virt_y; -+ } -+ return ret; -+} -+ -+/* This function must be called in module initial time */ -+static int camif_source_fmt(camif_gc_t *gc) -+{ -+ u32 cmd = 0; -+ -+ /* Configure CISRCFMT --Source Format */ -+ if (gc->itu_fmt & CAMIF_ITU601) { -+ cmd = CAMIF_ITU601; -+ } -+ else { -+ assert ( gc->itu_fmt & CAMIF_ITU656); -+ cmd = CAMIF_ITU656; -+ } -+ cmd |= SOURCE_HSIZE(gc->source_x)| SOURCE_VSIZE(gc->source_y); -+ /* Order422 */ -+ cmd |= gc->order422; -+ writel(cmd, camregs + S3C2440_CAM_REG_CISRCFMT); -+ -+ return 0 ; -+} -+ -+ -+/* -+ * Codec Input YCBCR422 will be Fixed -+ */ -+static int camif_target_fmt(camif_cfg_t *cfg) -+{ -+ u32 cmd = 0; -+ -+ if (cfg->dma_type & CAMIF_CODEC) { -+ /* YCBCR setting */ -+ cmd = TARGET_HSIZE(cfg->target_x)| TARGET_VSIZE(cfg->target_y); -+ if ( cfg->fmt & CAMIF_OUT_YCBCR420 ) { -+ cmd |= OUT_YCBCR420|IN_YCBCR422; -+ } -+ else { -+ assert(cfg->fmt & CAMIF_OUT_YCBCR422); -+ cmd |= OUT_YCBCR422|IN_YCBCR422; -+ } -+ writel(cmd | cfg->flip, camregs + S3C2440_CAM_REG_CICOTRGFMT); -+ -+ } else { -+ assert(cfg->dma_type & CAMIF_PREVIEW); -+ writel(TARGET_HSIZE(cfg->target_x)|TARGET_VSIZE(cfg->target_y)|cfg->flip, -+ camregs + S3C2440_CAM_REG_CIPRTRGFMT); -+ } -+ return 0; -+} -+ -+void camif_change_flip(camif_cfg_t *cfg) -+{ -+ u32 cmd = readl(camregs + S3C2440_CAM_REG_CICOTRGFMT); -+ -+ cmd &= ~(BIT14|BIT15); -+ cmd |= cfg->flip; -+ -+ writel(cmd, camregs + S3C2440_CAM_REG_CICOTRGFMT); -+} -+ -+ -+ -+/* Must: -+ * Before calling this function, -+ * you must use "camif_dynamic_open" -+ * If you want to enable both CODEC and preview -+ * you must do it at the same time. -+ */ -+int camif_capture_start(camif_cfg_t *cfg) -+{ -+ u32 n_cmd = 0; /* Next Command */ -+ -+ switch(cfg->exec) { -+ case CAMIF_BOTH_DMA_ON: -+ camif_reset(CAMIF_RESET, 0); /* Flush Camera Core Buffer */ -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRSCCTRL) | -+ SCALERSTART, camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ writel(readl(camregs + S3C2440_CAM_REG_CICOSCCTRL) | -+ SCALERSTART, camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ n_cmd = CAMIF_CAP_PREVIEW_ON | CAMIF_CAP_CODEC_ON; -+ break; -+ case CAMIF_DMA_ON: -+ camif_reset(CAMIF_RESET, 0); /* Flush Camera Core Buffer */ -+ if (cfg->dma_type&CAMIF_CODEC) { -+ writel(readl(camregs + S3C2440_CAM_REG_CICOSCCTRL) | -+ SCALERSTART, camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ n_cmd = CAMIF_CAP_CODEC_ON; -+ } else { -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRSCCTRL) | -+ SCALERSTART, camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ n_cmd = CAMIF_CAP_PREVIEW_ON; -+ } -+ -+ /* wait until Sync Time expires */ -+ /* First settting, to wait VSYNC fall */ -+ /* By VESA spec,in 640x480 @60Hz -+ MAX Delay Time is around 64us which "while" has.*/ -+ while(VSYNC & readl(camregs + S3C2440_CAM_REG_CICOSTATUS)); -+ break; -+ default: -+ break; -+} -+ writel(n_cmd | CAMIF_CAP_ON, camregs + S3C2440_CAM_REG_CIIMGCPT); -+ return 0; -+} -+ -+ -+int camif_capture_stop(camif_cfg_t *cfg) -+{ -+ u32 n_cmd = readl(camregs + S3C2440_CAM_REG_CIIMGCPT); /* Next Command */ -+ -+ switch(cfg->exec) { -+ case CAMIF_BOTH_DMA_OFF: -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRSCCTRL) & -+ ~SCALERSTART, camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ writel(readl(camregs + S3C2440_CAM_REG_CICOSCCTRL) & -+ ~SCALERSTART, camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ n_cmd = 0; -+ break; -+ case CAMIF_DMA_OFF_L_IRQ: /* fall thru */ -+ case CAMIF_DMA_OFF: -+ if (cfg->dma_type&CAMIF_CODEC) { -+ writel(readl(camregs + S3C2440_CAM_REG_CICOSCCTRL) & -+ ~SCALERSTART, camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ n_cmd &= ~CAMIF_CAP_CODEC_ON; -+ if (!(n_cmd & CAMIF_CAP_PREVIEW_ON)) -+ n_cmd = 0; -+ } else { -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRSCCTRL) & -+ ~SCALERSTART, camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ n_cmd &= ~CAMIF_CAP_PREVIEW_ON; -+ if (!(n_cmd & CAMIF_CAP_CODEC_ON)) -+ n_cmd = 0; -+ } -+ break; -+ default: -+ panic("Unexpected \n"); -+ } -+ writel(n_cmd, camregs + S3C2440_CAM_REG_CIIMGCPT); -+ -+ if (cfg->exec == CAMIF_DMA_OFF_L_IRQ) { /* Last IRQ */ -+ if (cfg->dma_type & CAMIF_CODEC) -+ writel(readl(camregs + S3C2440_CAM_REG_CICOCTRL) | -+ LAST_IRQ_EN, camregs + S3C2440_CAM_REG_CICOCTRL); -+ else -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRCTRL) | -+ LAST_IRQ_EN, camregs + S3C2440_CAM_REG_CIPRCTRL); -+ } -+#if 0 -+ else { /* to make internal state machine of CAMERA stop */ -+ camif_reset(CAMIF_RESET, 0); -+ } -+#endif -+ return 0; -+} -+ -+ -+/* LastIRQEn is autoclear */ -+void camif_last_irq_en(camif_cfg_t *cfg) -+{ -+ if ((cfg->exec == CAMIF_BOTH_DMA_ON) || (cfg->dma_type & CAMIF_CODEC)) -+ writel(readl(camregs + S3C2440_CAM_REG_CICOCTRL) | -+ LAST_IRQ_EN, camregs + S3C2440_CAM_REG_CICOCTRL); -+ -+ if ((cfg->exec == CAMIF_BOTH_DMA_ON) || !(cfg->dma_type & CAMIF_CODEC)) -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRCTRL) | -+ LAST_IRQ_EN, camregs + S3C2440_CAM_REG_CIPRCTRL); -+} -+ -+static int -+camif_scaler_internal(u32 srcWidth, u32 dstWidth, u32 *ratio, u32 *shift) -+{ -+ if(srcWidth>=64*dstWidth){ -+ printk(KERN_ERR"CAMERA:out of prescaler range: srcWidth /dstWidth = %d(< 64)\n", -+ srcWidth/dstWidth); -+ return 1; -+ } -+ else if(srcWidth>=32*dstWidth){ -+ *ratio=32; -+ *shift=5; -+ } -+ else if(srcWidth>=16*dstWidth){ -+ *ratio=16; -+ *shift=4; -+ } -+ else if(srcWidth>=8*dstWidth){ -+ *ratio=8; -+ *shift=3; -+ } -+ else if(srcWidth>=4*dstWidth){ -+ *ratio=4; -+ *shift=2; -+ } -+ else if(srcWidth>=2*dstWidth){ -+ *ratio=2; -+ *shift=1; -+ } -+ else { -+ *ratio=1; -+ *shift=0; -+ } -+ return 0; -+} -+ -+ -+int camif_g_fifo_status(camif_cfg_t *cfg) -+{ -+ u32 reg; -+ -+ if (cfg->dma_type & CAMIF_CODEC) { -+ u32 flag = CO_OVERFLOW_Y | CO_OVERFLOW_CB | CO_OVERFLOW_CR; -+ reg = readl(camregs + S3C2440_CAM_REG_CICOSTATUS); -+ if (reg & flag) { -+ printk("CODEC: FIFO error(0x%08x) and corrected\n",reg); -+ /* FIFO Error Count ++ */ -+ writel(readl(camregs + S3C2440_CAM_REG_CIWDOFST) | -+ CO_FIFO_Y | CO_FIFO_CB | CO_FIFO_CR, -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ -+ writel(readl(camregs + S3C2440_CAM_REG_CIWDOFST) & -+ ~(CO_FIFO_Y | CO_FIFO_CB | CO_FIFO_CR), -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ return 1; /* Error */ -+ } -+ } -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ u32 flag = PR_OVERFLOW_CB | PR_OVERFLOW_CR; -+ reg = readl(camregs + S3C2440_CAM_REG_CIPRSTATUS); -+ if (reg & flag) { -+ printk("PREVIEW:FIFO error(0x%08x) and corrected\n",reg); -+ writel(readl(camregs + S3C2440_CAM_REG_CIWDOFST) | -+ CO_FIFO_CB | CO_FIFO_CR, -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ -+ writel(readl(camregs + S3C2440_CAM_REG_CIWDOFST) & -+ ~(CO_FIFO_Y | CO_FIFO_CB | CO_FIFO_CR), -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ /* FIFO Error Count ++ */ -+ return 1; /* Error */ -+ } -+ } -+ return 0; /* No Error */ -+} -+ -+ -+/* Policy: -+ * if codec or preview define the win offset, -+ * other must follow that value. -+ */ -+int camif_win_offset(camif_gc_t *gc ) -+{ -+ u32 h = gc->win_hor_ofst; -+ u32 v = gc->win_ver_ofst; -+ -+ /*Clear Overflow */ -+ writel(CO_FIFO_Y | CO_FIFO_CB | CO_FIFO_CR | PR_FIFO_CB | PR_FIFO_CB, -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ writel(0, camregs + S3C2440_CAM_REG_CIWDOFST); -+ -+ if (!h && !v) { -+ writel(0, camregs + S3C2440_CAM_REG_CIWDOFST); -+ return 0; -+ } -+ -+ writel(WINOFEN | WINHOROFST(h) | WINVEROFST(v), camregs + S3C2440_CAM_REG_CIWDOFST); -+ return 0; -+} -+ -+/* -+ * when you change the resolution in a specific camera, -+ * sometimes, it is necessary to change the polarity -+ * -- SW.LEE -+ */ -+static void camif_polarity(camif_gc_t *gc) -+{ -+ u32 cmd = readl(camregs + S3C2440_CAM_REG_CIGCTRL);; -+ -+ cmd = cmd & ~(BIT26|BIT25|BIT24); /* clear polarity */ -+ if (gc->polarity_pclk) -+ cmd |= GC_INVPOLPCLK; -+ if (gc->polarity_vsync) -+ cmd |= GC_INVPOLVSYNC; -+ if (gc->polarity_href) -+ cmd |= GC_INVPOLHREF; -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ cmd, camregs + S3C2440_CAM_REG_CIGCTRL); -+} -+ -+ -+int camif_dynamic_open(camif_cfg_t *cfg) -+{ -+ camif_win_offset(cfg->gc); -+ camif_polarity(cfg->gc); -+ -+ if(camif_scaler(cfg)) { -+ printk(KERN_ERR "CAMERA:Preview Scaler, Change WinHorOfset or Target Size\n"); -+ return 1; -+ } -+ camif_target_fmt(cfg); -+ if (camif_dma_burst(cfg)) { -+ printk(KERN_ERR "CAMERA:DMA Busrt Length Error \n"); -+ return 1; -+ } -+ if(camif_malloc(cfg) ) { -+ printk(KERN_ERR " Instead of using consistent_alloc()\n" -+ " lease use dedicated memory allocation for DMA memory\n"); -+ return -1; -+ } -+ camif_pingpong(cfg); -+ return 0; -+} -+ -+int camif_dynamic_close(camif_cfg_t *cfg) -+{ -+ camif_demalloc(cfg); -+ return 0; -+} -+ -+static int camif_target_area(camif_cfg_t *cfg) -+{ -+ u32 rect = cfg->target_x * cfg->target_y; -+ -+ if (cfg->dma_type & CAMIF_CODEC) -+ writel(rect, camregs + S3C2440_CAM_REG_CICOTAREA); -+ -+ if (cfg->dma_type & CAMIF_PREVIEW) -+ writel(rect, camregs + S3C2440_CAM_REG_CIPRTAREA); -+ -+ return 0; -+} -+ -+static int inline camif_hw_reg(camif_cfg_t *cfg) -+{ -+ u32 cmd = 0; -+ -+ if (cfg->dma_type & CAMIF_CODEC) { -+ writel(PRE_SHIFT(cfg->sc.shfactor) | -+ PRE_HRATIO(cfg->sc.prehratio) | -+ PRE_VRATIO(cfg->sc.prevratio), -+ camregs + S3C2440_CAM_REG_CICOSCPRERATIO); -+ writel(PRE_DST_WIDTH(cfg->sc.predst_x) | -+ PRE_DST_HEIGHT(cfg->sc.predst_y), -+ camregs + S3C2440_CAM_REG_CICOSCPREDST); -+ -+ /* Differ from Preview */ -+ if (cfg->sc.scalerbypass) -+ cmd |= SCALERBYPASS; -+ if (cfg->sc.scaleup_h & cfg->sc.scaleup_v) -+ cmd |= BIT30|BIT29; -+ writel(cmd | MAIN_HRATIO(cfg->sc.mainhratio) | -+ MAIN_VRATIO(cfg->sc.mainvratio), -+ camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ return 0; -+ } -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ writel(PRE_SHIFT(cfg->sc.shfactor) | -+ PRE_HRATIO(cfg->sc.prehratio) | -+ PRE_VRATIO(cfg->sc.prevratio), -+ camregs + S3C2440_CAM_REG_CIPRSCPRERATIO); -+ writel(PRE_DST_WIDTH(cfg->sc.predst_x) | -+ PRE_DST_HEIGHT(cfg->sc.predst_y), -+ camregs + S3C2440_CAM_REG_CIPRSCPREDST); -+ /* Differ from Codec */ -+ if (cfg->fmt & CAMIF_RGB24) -+ cmd |= RGB_FMT24; -+ if (cfg->sc.scaleup_h & cfg->sc.scaleup_v) -+ cmd |= BIT29 | BIT28; -+ writel(cmd | MAIN_HRATIO(cfg->sc.mainhratio) | S_METHOD | -+ MAIN_VRATIO(cfg->sc.mainvratio), -+ camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ return 0; -+ } -+ -+ panic("CAMERA:DMA_TYPE Wrong \n"); -+ return 0; -+} -+ -+ -+/* Configure Pre-scaler control & main scaler control register */ -+static int camif_scaler(camif_cfg_t *cfg) -+{ -+ int tx = cfg->target_x, ty = cfg->target_y; -+ int sx, sy; -+ -+ if (tx <= 0 || ty <= 0) -+ panic("CAMERA: Invalid target size \n"); -+ -+ sx = cfg->gc->source_x - 2 * cfg->gc->win_hor_ofst; -+ sy = cfg->gc->source_y - 2 * cfg->gc->win_ver_ofst; -+ if (sx <= 0 || sy <= 0) -+ panic("CAMERA: Invalid source size \n"); -+ -+ cfg->sc.modified_src_x = sx; -+ cfg->sc.modified_src_y = sy; -+ -+ /* Pre-scaler control register 1 */ -+ camif_scaler_internal(sx, tx, &cfg->sc.prehratio, &cfg->sc.hfactor); -+ camif_scaler_internal(sy, ty, &cfg->sc.prevratio, &cfg->sc.vfactor); -+ -+ if (cfg->dma_type & CAMIF_PREVIEW) -+ if ((sx / cfg->sc.prehratio) > 640) { -+ printk(KERN_INFO "CAMERA: Internal Preview line " -+ "buffer is 640 pixels\n"); -+ return 1; /* Error */ -+ } -+ -+ cfg->sc.shfactor = 10 - (cfg->sc.hfactor + cfg->sc.vfactor); -+ /* Pre-scaler control register 2 */ -+ cfg->sc.predst_x = sx / cfg->sc.prehratio; -+ cfg->sc.predst_y = sy / cfg->sc.prevratio; -+ -+ /* Main-scaler control register */ -+ cfg->sc.mainhratio = (sx << 8) / (tx << cfg->sc.hfactor); -+ cfg->sc.mainvratio = (sy << 8) / (ty << cfg->sc.vfactor); -+ DPRINTK(" sx %d, sy %d tx %d ty %d \n", sx, sy, tx, ty); -+ DPRINTK(" hfactor %d vfactor %d \n",cfg->sc.hfactor, cfg->sc.vfactor); -+ -+ cfg->sc.scaleup_h = (sx <= tx) ? 1: 0; -+ cfg->sc.scaleup_v = (sy <= ty) ? 1: 0; -+ if (cfg->sc.scaleup_h != cfg->sc.scaleup_v) -+ printk(KERN_ERR "scaleup_h must be same to scaleup_v \n"); -+ -+ camif_hw_reg(cfg); -+ camif_target_area(cfg); -+ -+ return 0; -+} -+ -+/****************************************************** -+ CalculateBurstSize - Calculate the busrt lengths -+ Description: -+ - dstHSize: the number of the byte of H Size. -+********************************************************/ -+static void camif_g_bsize(u32 hsize, u32 *mburst, u32 *rburst) -+{ -+ u32 tmp; -+ -+ tmp = (hsize / 4) % 16; -+ switch(tmp) { -+ case 0: -+ *mburst=16; -+ *rburst=16; -+ break; -+ case 4: -+ *mburst=16; -+ *rburst=4; -+ break; -+ case 8: -+ *mburst=16; -+ *rburst=8; -+ break; -+ default: -+ tmp=(hsize / 4) % 8; -+ switch(tmp) { -+ case 0: -+ *mburst = 8; -+ *rburst = 8; -+ break; -+ case 4: -+ *mburst = 8; -+ *rburst = 4; -+ default: -+ *mburst = 4; -+ tmp = (hsize / 4) % 4; -+ *rburst= (tmp) ? tmp: 4; -+ break; -+ } -+ break; -+ } -+} -+ -+/* SXGA 1028x1024*/ -+/* XGA 1024x768 */ -+/* SVGA 800x600 */ -+/* VGA 640x480 */ -+/* CIF 352x288 */ -+/* QVGA 320x240 */ -+/* QCIF 176x144 */ -+/* ret val -+ 1 : DMA Size Error -+*/ -+#define BURST_ERR 1 -+static int camif_dma_burst(camif_cfg_t *cfg) -+{ -+ int width = cfg->target_x; -+ -+ if (cfg->dma_type & CAMIF_CODEC ) { -+ u32 yburst_m, yburst_r; -+ u32 cburst_m, cburst_r; -+ /* CODEC DMA WIDHT is multiple of 16 */ -+ if (width % 16) -+ return BURST_ERR; /* DMA Burst Length Error */ -+ camif_g_bsize(width, &yburst_m, &yburst_r); -+ camif_g_bsize(width / 2, &cburst_m, &cburst_r); -+ -+ writel(YBURST_M(yburst_m) | CBURST_M(cburst_m) | -+ YBURST_R(yburst_r) | CBURST_R(cburst_r), -+ camregs + S3C2440_CAM_REG_CICOCTRL); -+ } -+ -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ u32 rgburst_m, rgburst_r; -+ if(cfg->fmt == CAMIF_RGB24) { -+ if (width % 2) -+ return BURST_ERR; /* DMA Burst Length Error */ -+ camif_g_bsize(width*4,&rgburst_m,&rgburst_r); -+ } else { /* CAMIF_RGB16 */ -+ if ((width / 2) %2) -+ return BURST_ERR; /* DMA Burst Length Error */ -+ camif_g_bsize(width*2,&rgburst_m,&rgburst_r); -+ } -+ -+ writel(RGBURST_M(rgburst_m) | RGBURST_R(rgburst_r), -+ camregs + S3C2440_CAM_REG_CIPRCTRL); -+ } -+ return 0; -+} -+ -+static int camif_gpio_init(void) -+{ -+#ifdef CONFIG_ARCH_S3C24A0A -+ /* S3C24A0A has the dedicated signal pins for Camera */ -+#else -+ s3c2410_gpio_cfgpin(S3C2440_GPJ0, S3C2440_GPJ0_CAMDATA0); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ1, S3C2440_GPJ1_CAMDATA1); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ2, S3C2440_GPJ2_CAMDATA2); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ3, S3C2440_GPJ3_CAMDATA3); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ4, S3C2440_GPJ4_CAMDATA4); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ5, S3C2440_GPJ5_CAMDATA5); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ6, S3C2440_GPJ6_CAMDATA6); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ7, S3C2440_GPJ7_CAMDATA7); -+ -+ s3c2410_gpio_cfgpin(S3C2440_GPJ8, S3C2440_GPJ8_CAMPCLK); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ9, S3C2440_GPJ9_CAMVSYNC); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ10, S3C2440_GPJ10_CAMHREF); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ11, S3C2440_GPJ11_CAMCLKOUT); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ12, S3C2440_GPJ12_CAMRESET); -+#endif -+ return 0; -+} -+ -+ -+#define ROUND_ADD 0x100000 -+ -+#ifdef CONFIG_ARCH_S3C24A0A -+int camif_clock_init(camif_gc_t *gc) -+{ -+ unsigned int upll, camclk_div, camclk; -+ -+ if (!gc) camclk = 24000000; -+ else { -+ camclk = gc->camclk; -+ if (camclk > 48000000) -+ printk(KERN_ERR "Wrong Camera Clock\n"); -+ } -+ -+ CLKCON |= CLKCON_CAM_UPLL | CLKCON_CAM_HCLK; -+ upll = get_bus_clk(GET_UPLL); -+ printk(KERN_INFO "CAMERA:Default UPLL %08d and Assing 96Mhz to UPLL\n",upll); -+ UPLLCON = FInsrt(56, fPLL_MDIV) | FInsrt(2, fPLL_PDIV)| FInsrt(1, fPLL_SDIV); -+ upll = get_bus_clk(GET_UPLL); -+ -+ camclk_div = (upll+ROUND_ADD) / camclk - 1; -+ CLKDIVN = (CLKDIVN & 0xFF) | CLKDIVN_CAM(camclk_div); -+ printk(KERN_INFO"CAMERA:upll %d MACRO 0x%08X CLKDIVN 0x%08X \n", -+ upll, CLKDIVN_CAM(camclk_div), CLKDIVN); -+ writel(0, camregs + S3C2440_CAM_REG_CIIMGCPT); /* Dummy ? */ -+ -+ return 0; -+} -+#else -+int camif_clock_init(camif_gc_t *gc) -+{ -+ unsigned int camclk; -+ struct clk *clk_camif = clk_get(NULL, "camif"); -+ struct clk *clk_camif_upll = clk_get(NULL, "camif-upll"); -+ -+ if (!gc) -+ camclk = 24000000; -+ else { -+ camclk = gc->camclk; -+ if (camclk > 48000000) -+ printk(KERN_ERR "Wrong Camera Clock\n"); -+ } -+ -+ clk_set_rate(clk_camif, camclk); -+ -+ clk_enable(clk_camif); -+ clk_enable(clk_camif_upll); -+ -+ -+#if 0 -+ CLKCON |= CLKCON_CAMIF; -+ upll = elfin_get_bus_clk(GET_UPLL); -+ printk(KERN_INFO "CAMERA:Default UPLL %08d and Assing 96Mhz to UPLL\n",upll); -+ { -+ UPLLCON = FInsrt(60, fPLL_MDIV) | FInsrt(4, fPLL_PDIV)| FInsrt(1, fPLL_SDIV); -+ CLKDIVN |= DIVN_UPLL; /* For USB */ -+ upll = elfin_get_bus_clk(GET_UPLL); -+ } -+ -+ camclk_div = (upll+ROUND_ADD) /(camclk * 2) -1; -+ CAMDIVN = CAMCLK_SET_DIV|(camclk_div&0xf); -+ printk(KERN_INFO "CAMERA:upll %08d cam_clk %08d CAMDIVN 0x%08x \n",upll,camclk, CAMDIVN); -+#endif -+ writel(0, camregs + S3C2440_CAM_REG_CIIMGCPT); /* Dummy ? */ -+ -+ return 0; -+} -+#endif -+ -+/* -+ Reset Camera IP in CPU -+ Reset External Sensor -+ */ -+void camif_reset(int is, int delay) -+{ -+ switch (is) { -+ case CAMIF_RESET: -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ GC_SWRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ mdelay(1); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) & -+ ~GC_SWRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ break; -+ case CAMIF_EX_RESET_AH: /*Active High */ -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) & -+ ~GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ udelay(200); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ udelay(delay); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) & -+ ~GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ break; -+ case CAMIF_EX_RESET_AL: /*Active Low */ -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ udelay(200); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) & -+ ~GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ udelay(delay); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ break; -+ default: -+ break; -+ } -+} -+ -+/* For Camera Operation, -+ * we can give the high priority to REQ2 of ARBITER1 -+ */ -+ -+/* Please move me into proper place -+ * camif_gc_t is not because "rmmod imgsenor" will delete the instance of camif_gc_t -+ */ -+static u32 old_priority; -+ -+static void camif_bus_priority(int flag) -+{ -+ if (flag) { -+#ifdef CONFIG_ARCH_S3C24A0A -+ old_priority = PRIORITY0; -+ PRIORITY0 = PRIORITY_I_FIX; -+ PRIORITY1 = PRIORITY_I_FIX; -+ -+#else -+ old_priority = readl(S3C2410_PRIORITY); -+ writel(readl(S3C2410_PRIORITY) & ~(3<<7), S3C2410_PRIORITY); -+ writel(readl(S3C2410_PRIORITY) | (1<<7), S3C2410_PRIORITY); /* Arbiter 1, REQ2 first */ -+ writel(readl(S3C2410_PRIORITY) & ~(1<<1), S3C2410_PRIORITY); /* Disable Priority Rotate */ -+#endif -+ } -+ else { -+#ifdef CONFIG_ARCH_S3C24A0A -+ PRIORITY0 = old_priority; -+ PRIORITY1 = old_priority; -+#else -+ writel(old_priority, S3C2410_PRIORITY); -+#endif -+ } -+} -+ -+static void inline camif_clock_off(void) -+{ -+#if defined (CONFIG_ARCH_S3C24A0A) -+ writel(0, camregs + S3C2440_CAM_REG_CIIMGCPT); -+ -+ CLKCON &= ~CLKCON_CAM_UPLL; -+ CLKCON &= ~CLKCON_CAM_HCLK; -+#else -+ struct clk *clk_camif = clk_get(NULL, "camif"); -+ struct clk *clk_camif_upll = clk_get(NULL, "camif-upll"); -+ -+ writel(0, camregs + S3C2440_CAM_REG_CIIMGCPT); -+ -+ clk_disable(clk_camif); -+ clk_disable(clk_camif_upll); -+#endif -+} -+ -+ -+/* Init external image sensor -+ * Before make some value into image senor, -+ * you must set up the pixel clock. -+ */ -+void camif_setup_sensor(void) -+{ -+ camif_reset(CAMIF_RESET, 0); -+ camif_gpio_init(); -+ camif_clock_init(NULL); -+/* Sometimes ,Before loading I2C module, we need the reset signal */ -+#ifdef CONFIG_ARCH_S3C24A0A -+ camif_reset(CAMIF_EX_RESET_AL,1000); -+#else -+ camif_reset(CAMIF_EX_RESET_AH,1000); -+#endif -+} -+ -+void camif_hw_close(camif_cfg_t *cfg) -+{ -+ camif_bus_priority(0); -+ camif_clock_off(); -+} -+ -+void camif_hw_open(camif_gc_t *gc) -+{ -+ camif_source_fmt(gc); -+ camif_win_offset(gc); -+ camif_bus_priority(1); -+} -+ -+ -+ -+/* -+ * Local variables: -+ * tab-width: 8 -+ * c-indent-level: 8 -+ * c-basic-offset: 8 -+ * c-set-style: "K&R" -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/camif_fsm.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/camif_fsm.c 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,432 @@ -+/* -+ Copyright (C) 2004 Samsung Electronics -+ SW.LEE -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+ -+//#define SW_DEBUG -+static void camif_start_p_with_c(camif_cfg_t *cfg); -+ -+#include "camif.h" -+const char *fsm_version = -+ "$Id: camif_fsm.c,v 1.3 2004/04/27 10:26:28 swlee Exp $"; -+ -+ -+/* -+ * FSM function is the place where Synchronization in not necessary -+ * because IRS calls this functions. -+ */ -+ -+ssize_t camif_p_1fsm_start(camif_cfg_t *cfg) -+{ -+ //camif_reset(CAMIF_RESET,0); -+ cfg->exec = CAMIF_DMA_ON; -+ camif_capture_start(cfg); -+ camif_last_irq_en(cfg); -+ cfg->status = CAMIF_STARTED; -+ cfg->fsm = CAMIF_1nd_INT; -+ return 0; -+} -+ -+ -+ssize_t camif_p_2fsm_start(camif_cfg_t *cfg) -+{ -+ camif_reset(CAMIF_RESET,0);/* FIFO Count goes to zero */ -+ cfg->exec = CAMIF_DMA_ON; -+ camif_capture_start(cfg); -+ cfg->status = CAMIF_STARTED; -+ cfg->fsm = CAMIF_1nd_INT; -+ return 0; -+} -+ -+ -+ssize_t camif_4fsm_start(camif_cfg_t *cfg) -+{ -+ camif_reset(CAMIF_RESET,0); /* FIFO Count goes to zero */ -+ cfg->exec = CAMIF_DMA_ON; -+ camif_capture_start(cfg); -+ cfg->status = CAMIF_STARTED; -+ cfg->fsm = CAMIF_1nd_INT; -+ cfg->perf.frames = 0; -+ return 0; -+} -+ -+ -+/* Policy: -+ cfg->perf.frames set in camif_fsm.c -+ cfg->status set in video-driver.c -+ */ -+ -+/* -+ * Don't insert camif_reset(CAM_RESET, 0 ) into this func -+ */ -+ssize_t camif_p_stop(camif_cfg_t *cfg) -+{ -+ cfg->exec = CAMIF_DMA_OFF; -+// cfg->status = CAMIF_STOPPED; -+ camif_capture_stop(cfg); -+ cfg->perf.frames = 0; /* Dupplicated ? */ -+ return 0; -+} -+ -+/* When C working, P asks C to play togehter */ -+/* Only P must call this function */ -+void camif_start_c_with_p (camif_cfg_t *cfg, camif_cfg_t *other) -+{ -+// cfg->gc->other = get_camif(CODEC_MINOR); -+ cfg->gc->other = other; -+ camif_start_p_with_c(cfg); -+} -+ -+static void camif_start_p_with_c(camif_cfg_t *cfg) -+{ -+ camif_cfg_t *other = (camif_cfg_t *)cfg->gc->other; -+ /* Preview Stop */ -+ cfg->exec = CAMIF_DMA_OFF; -+ camif_capture_stop(cfg); -+ /* Start P and C */ -+ camif_reset(CAMIF_RESET, 0); -+ cfg->exec =CAMIF_BOTH_DMA_ON; -+ camif_capture_start(cfg); -+ cfg->fsm = CAMIF_1nd_INT; /* For Preview */ -+ if(!other) panic("Unexpected Error \n"); -+ other->fsm = CAMIF_1nd_INT; /* For Preview */ -+} -+ -+static void camif_auto_restart(camif_cfg_t *cfg) -+{ -+// if (cfg->dma_type & CAMIF_CODEC) return; -+ if (cfg->auto_restart) -+ camif_start_p_with_c(cfg); -+} -+ -+ -+/* Supposed that PREVIEW already running -+ * request PREVIEW to start with Codec -+ */ -+static int camif_check_global(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ -+ if (down_interruptible(&cfg->gc->lock)) -+ return -ERESTARTSYS; -+ if ( cfg->gc->status & CWANT2START ) { -+ cfg->gc->status &= ~CWANT2START; -+ cfg->auto_restart = 1; -+ ret = 1; -+ } -+ else { -+ ret = 0; /* There is no codec */ -+ cfg->auto_restart = 0; /* Duplicated ..Dummy */ -+ } -+ -+ up(&cfg->gc->lock); -+ -+ return ret; -+} -+ -+/* -+ * 1nd INT : Start Interrupt -+ * Xnd INT : enable Last IRQ : pingpong get the valid data -+ * Ynd INT : Stop Codec or Preview : pingpong get the valid data -+ * Znd INT : Last IRQ : valid data -+ */ -+#define CHECK_FREQ 5 -+int camif_enter_p_4fsm(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ -+ cfg->perf.frames++; -+ if (cfg->fsm == CAMIF_NORMAL_INT) -+ if (cfg->perf.frames % CHECK_FREQ == 0) -+ ret = camif_check_global(cfg); -+ if (ret > 0) cfg->fsm = CAMIF_Xnd_INT; /* Codec wait for Preview */ -+ -+ switch (cfg->fsm) { -+ case CAMIF_1nd_INT: /* Start IRQ */ -+ cfg->fsm = CAMIF_NORMAL_INT; -+ ret = INSTANT_SKIP; -+ DPRINTK(KERN_INFO "1nd INT \n"); -+ break; -+ case CAMIF_NORMAL_INT: -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_NORMAL_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "NORMAL INT \n"); -+ break; -+ case CAMIF_Xnd_INT: -+ camif_last_irq_en(cfg);/* IRQ for Enabling LAST IRQ */ -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_Ynd_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Xnd INT \n"); -+ break; -+ case CAMIF_Ynd_INT: /* Capture Stop */ -+ cfg->exec = CAMIF_DMA_OFF; -+ cfg->status = CAMIF_INT_HAPPEN; -+ camif_capture_stop(cfg); -+ cfg->fsm = CAMIF_Znd_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Ynd INT \n"); -+ break; -+ case CAMIF_Znd_INT: /* LAST IRQ (Dummy IRQ */ -+ cfg->fsm = CAMIF_DUMMY_INT; -+ cfg->status = CAMIF_INT_HAPPEN; -+ ret = INSTANT_GO; -+ camif_auto_restart(cfg); /* Automatically Restart Camera */ -+ DPRINTK(KERN_INFO "Znd INT \n"); -+ break; -+ case CAMIF_DUMMY_INT: -+ cfg->status = CAMIF_STOPPED; /* Dupplicate ? */ -+ ret = INSTANT_SKIP; -+// DPRINTK(KERN_INFO "Dummy INT \n"); -+ break; -+ default: -+ printk(KERN_INFO "Unexpect INT %d \n",cfg->fsm); -+ ret = INSTANT_SKIP; -+ break; -+ } -+ return ret; -+} -+ -+ -+/* -+ * NO autorestart included in this function -+ */ -+int camif_enter_c_4fsm(camif_cfg_t *cfg) -+{ -+ int ret; -+ -+ cfg->perf.frames++; -+#if 0 -+ if ( (cfg->fsm==CAMIF_NORMAL_INT) -+ && (cfg->perf.frames>cfg->restart_limit-1) -+ ) -+ cfg->fsm = CAMIF_Xnd_INT; -+#endif -+ switch (cfg->fsm) { -+ case CAMIF_1nd_INT: /* Start IRQ */ -+ cfg->fsm = CAMIF_NORMAL_INT; -+// cfg->status = CAMIF_STARTED; /* need this to meet auto-restart */ -+ ret = INSTANT_SKIP; -+ DPRINTK(KERN_INFO "1nd INT \n"); -+ break; -+ case CAMIF_NORMAL_INT: -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_NORMAL_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "NORMALd INT \n"); -+ break; -+ case CAMIF_Xnd_INT: -+ camif_last_irq_en(cfg);/* IRQ for Enabling LAST IRQ */ -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_Ynd_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Xnd INT \n"); -+ break; -+ case CAMIF_Ynd_INT: /* Capture Stop */ -+ cfg->exec = CAMIF_DMA_OFF; -+ cfg->status = CAMIF_INT_HAPPEN; -+ camif_capture_stop(cfg); -+ cfg->fsm = CAMIF_Znd_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Ynd INT \n"); -+ break; -+ case CAMIF_Znd_INT: /* LAST IRQ (Dummy IRQ */ -+ cfg->fsm = CAMIF_DUMMY_INT; -+ cfg->status = CAMIF_INT_HAPPEN; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Znd INT \n"); -+ break; -+ case CAMIF_DUMMY_INT: -+ cfg->status = CAMIF_STOPPED; /* Dupplicate ? */ -+ ret = INSTANT_SKIP; -+ break; -+ default: -+ printk(KERN_INFO "Unexpect INT %d \n",cfg->fsm); -+ ret = INSTANT_SKIP; -+ break; -+ } -+ return ret; -+} -+ -+/* 4 Interrups State Machine is for two pingpong -+ * 1nd INT : Start Interrupt -+ * Xnd INT : enable Last IRQ : pingpong get the valid data -+ * Ynd INT : Stop Codec or Preview : pingpong get the valid data -+ * Znd INT : Last IRQ : valid data -+ * -+ * Note: -+ * Before calling this func, you must call camif_reset -+ */ -+ -+int camif_enter_2fsm(camif_cfg_t *cfg) /* Codec FSM */ -+{ -+ int ret; -+ -+ cfg->perf.frames++; -+ switch (cfg->fsm) { -+ case CAMIF_1nd_INT: /* Start IRQ */ -+ cfg->fsm = CAMIF_Xnd_INT; -+ ret = INSTANT_SKIP; -+// printk(KERN_INFO "1nd INT \n"); -+ break; -+ case CAMIF_Xnd_INT: -+ camif_last_irq_en(cfg);/* IRQ for Enabling LAST IRQ */ -+ cfg->now_frame_num = 0; -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_Ynd_INT; -+ ret = INSTANT_GO; -+// printk(KERN_INFO "2nd INT \n"); -+ break; -+ case CAMIF_Ynd_INT: /* Capture Stop */ -+ cfg->exec = CAMIF_DMA_OFF; -+ cfg->now_frame_num = 1; -+ cfg->status = CAMIF_INT_HAPPEN; -+ camif_capture_stop(cfg); -+ cfg->fsm = CAMIF_Znd_INT; -+ ret = INSTANT_GO; -+// printk(KERN_INFO "Ynd INT \n"); -+ break; -+ case CAMIF_Znd_INT: /* LAST IRQ (Dummy IRQ */ -+ cfg->now_frame_num = 0; -+// cfg->fsm = CAMIF_DUMMY_INT; -+ cfg->status = CAMIF_INT_HAPPEN; -+ ret = INSTANT_GO; -+// printk(KERN_INFO "Znd INT \n"); -+ break; -+ case CAMIF_DUMMY_INT: -+ cfg->status = CAMIF_STOPPED; /* Dupplicate ? */ -+ ret = INSTANT_SKIP; -+ printk(KERN_INFO "Dummy INT \n"); -+ break; -+ default: /* CAMIF_PENDING_INT */ -+ printk(KERN_INFO "Unexpect INT \n"); -+ ret = INSTANT_SKIP; -+ break; -+ } -+ return ret; -+} -+ -+ -+/* 2 Interrups State Machine is for one pingpong -+ * 1nd INT : Stop Codec or Preview : pingpong get the valid data -+ * 2nd INT : Last IRQ : dummy data -+ */ -+int camif_enter_1fsm(camif_cfg_t *cfg) /* Codec FSM */ -+{ -+ int ret; -+ -+ cfg->perf.frames++; -+ switch (cfg->fsm) { -+ case CAMIF_Ynd_INT: /* IRQ for Enabling LAST IRQ */ -+ cfg->exec = CAMIF_DMA_OFF; -+ camif_capture_stop(cfg); -+ cfg->fsm = CAMIF_Znd_INT; -+ ret = INSTANT_SKIP; -+ // printk(KERN_INFO "Ynd INT \n"); -+ break; -+ case CAMIF_Znd_INT: /* LAST IRQ (Dummy IRQ */ -+ cfg->fsm = CAMIF_DUMMY_INT; -+ cfg->status = CAMIF_INT_HAPPEN; -+ ret = INSTANT_GO; -+ // printk(KERN_INFO "Znd INT \n"); -+ break; -+ case CAMIF_DUMMY_INT: -+ cfg->status = CAMIF_STOPPED; /* Dupplicate ? */ -+ ret = INSTANT_SKIP; -+ printk(KERN_INFO "Dummy INT \n"); -+ break; -+ default: -+ printk(KERN_INFO "Unexpect INT \n"); -+ ret = INSTANT_SKIP; -+ break; -+ } -+ return ret; -+} -+ -+ -+/* -+ * GLOBAL STATUS CONTROL FUNCTION -+ * -+ */ -+ -+ -+/* Supposed that PREVIEW already running -+ * request PREVIEW to start with Codec -+ */ -+int camif_callback_start(camif_cfg_t *cfg) -+{ -+ int doit = 1; -+ while (doit) { -+ if (down_interruptible(&cfg->gc->lock)) { -+ return -ERESTARTSYS; -+ } -+ cfg->gc->status = CWANT2START; -+ cfg->gc->other = cfg; -+ up(&cfg->gc->lock); -+ doit = 0; -+ } -+ return 0; -+} -+ -+/* -+ * Return status of Preview Machine -+ ret value : -+ 0: Preview is not working -+ X: Codec must follow PREVIEW start -+*/ -+int camif_check_preview(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ -+ if (down_interruptible(&cfg->gc->lock)) { -+ ret = -ERESTARTSYS; -+ return ret; -+ } -+ if (cfg->gc->user == 1) ret = 0; -+ // else if (cfg->gc->status & PNOTWORKING) ret = 0; -+ else ret = 1; -+ up(&cfg->gc->lock); -+ return ret; -+} -+ -+ -+ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/camif.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/camif.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,304 @@ -+/* -+ FIMC2.0 Camera Header File -+ -+ Copyright (C) 2003 Samsung Electronics (SW.LEE: hitchcar@samsung.com) -+ -+ Author : SW.LEE -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+* -+*/ -+ -+ -+#ifndef __FIMC20_CAMIF_H_ -+#define __FIMC20_CAMIF_H_ -+ -+#ifdef __KERNEL__ -+ -+#include "bits.h" -+#include "videodev.h" -+#include -+#include -+ -+#endif /* __KERNEL__ */ -+ -+#ifndef O_NONCAP -+#define O_NONCAP O_TRUNC -+#endif -+ -+/* Codec or Preview Status */ -+#define CAMIF_STARTED BIT1 -+#define CAMIF_STOPPED BIT2 -+#define CAMIF_INT_HAPPEN BIT3 -+ -+/* Codec or Preview : Interrupt FSM */ -+#define CAMIF_1nd_INT BIT7 -+#define CAMIF_Xnd_INT BIT8 -+#define CAMIF_Ynd_INT BIT9 -+#define CAMIF_Znd_INT BIT10 -+#define CAMIF_NORMAL_INT BIT11 -+#define CAMIF_DUMMY_INT BIT12 -+#define CAMIF_PENDING_INT 0 -+ -+ -+/* CAMIF RESET Definition */ -+#define CAMIF_RESET BIT0 -+#define CAMIF_EX_RESET_AL BIT1 /* Active Low */ -+#define CAMIF_EX_RESET_AH BIT2 /* Active High */ -+ -+ -+enum camif_itu_fmt { -+ CAMIF_ITU601 = BIT31, -+ CAMIF_ITU656 = 0 -+}; -+ -+/* It is possbie to use two device simultaneously */ -+enum camif_dma_type { -+ CAMIF_PREVIEW = BIT0, -+ CAMIF_CODEC = BIT1, -+}; -+ -+enum camif_order422 { -+ CAMIF_YCBYCR = 0, -+ CAMIF_YCRYCB = BIT14, -+ CAMIF_CBYCRY = BIT15, -+ CAMIF_CRYCBY = BIT14 | BIT15 -+}; -+ -+enum flip_mode { -+ CAMIF_FLIP = 0, -+ CAMIF_FLIP_X = BIT14, -+ CAMIF_FLIP_Y = BIT15, -+ CAMIF_FLIP_MIRROR = BIT14 |BIT15, -+}; -+ -+enum camif_codec_fmt { -+ /* Codec part */ -+ CAMIF_IN_YCBCR420 = BIT0, /* Currently IN_YCBCR format fixed */ -+ CAMIF_IN_YCBCR422 = BIT1, -+ CAMIF_OUT_YCBCR420 = BIT4, -+ CAMIF_OUT_YCBCR422 = BIT5, -+ /* Preview Part */ -+ CAMIF_RGB16 = BIT2, -+ CAMIF_RGB24 = BIT3, -+}; -+ -+enum camif_capturing { -+ CAMIF_BOTH_DMA_ON = BIT4, -+ CAMIF_DMA_ON = BIT3, -+ CAMIF_BOTH_DMA_OFF = BIT1, -+ CAMIF_DMA_OFF = BIT0, -+ /*------------------------*/ -+ CAMIF_DMA_OFF_L_IRQ= BIT5, -+}; -+ -+typedef struct camif_performance -+{ -+ int frames; -+ int framesdropped; -+ __u64 bytesin; -+ __u64 bytesout; -+ __u32 reserved[4]; -+} camif_perf_t; -+ -+ -+typedef struct { -+ dma_addr_t phys_y; -+ dma_addr_t phys_cb; -+ dma_addr_t phys_cr; -+ u8 *virt_y; -+ u8 *virt_cb; -+ u8 *virt_cr; -+ dma_addr_t phys_rgb; -+ u8 *virt_rgb; -+}img_buf_t; -+ -+ -+/* this structure convers the CIWDOFFST, prescaler, mainscaler */ -+typedef struct { -+ u32 modified_src_x; /* After windows applyed to source_x */ -+ u32 modified_src_y; -+ u32 hfactor; -+ u32 vfactor; -+ u32 shfactor; /* SHfactor = 10 - ( hfactor + vfactor ) */ -+ u32 prehratio; -+ u32 prevratio; -+ u32 predst_x; -+ u32 predst_y; -+ u32 scaleup_h; -+ u32 scaleup_v; -+ u32 mainhratio; -+ u32 mainvratio; -+ u32 scalerbypass; /* only codec */ -+} scaler_t; -+ -+ -+enum v4l2_status { -+ CAMIF_V4L2_INIT = BIT0, -+ CAMIF_v4L2_DIRTY = BIT1, -+}; -+ -+ -+/* Global Status Definition */ -+#define PWANT2START BIT0 -+#define CWANT2START BIT1 -+#define BOTH_STARTED (PWANT2START|CWANT2START) -+#define PNOTWORKING BIT4 -+#define C_WORKING BIT5 -+ -+typedef struct { -+ struct semaphore lock; -+ enum camif_itu_fmt itu_fmt; -+ enum camif_order422 order422; -+ u32 win_hor_ofst; -+ u32 win_ver_ofst; -+ u32 camclk; /* External Image Sensor Camera Clock */ -+ u32 source_x; -+ u32 source_y; -+ u32 polarity_pclk; -+ u32 polarity_vsync; -+ u32 polarity_href; -+ struct i2c_client *sensor; -+ u32 user; /* MAX 2 (codec, preview) */ -+ u32 old_priority; /* BUS PRIORITY register */ -+ u32 status; -+ u32 init_sensor;/* initializing sensor */ -+ void *other; /* Codec camif_cfg_t */ -+ u32 reset_type; /* External Sensor Reset Type */ -+ u32 reset_udelay; -+} camif_gc_t; /* gobal control register */ -+ -+ -+/* when App want to change v4l2 parameter, -+ * we instantly store it into v4l2_t v2 -+ * and then reflect it to hardware -+ */ -+typedef struct v4l2 { -+ struct v4l2_fmtdesc *fmtdesc; -+ struct v4l2_pix_format fmt; /* current pixel format */ -+ struct v4l2_input input; -+ struct video_picture picture; -+ enum v4l2_status status; -+ int used_fmt ; /* used format index */ -+} v4l2_t; -+ -+ -+typedef struct camif_c_t { -+ struct video_device *v; -+ /* V4L2 param only for v4l2 driver */ -+ v4l2_t v2; -+ camif_gc_t *gc; /* Common between Codec and Preview */ -+ /* logical parameter */ -+ wait_queue_head_t waitq; -+ u32 status; /* Start/Stop */ -+ u32 fsm; /* Start/Stop */ -+ u32 open_count; /* duplicated */ -+ int irq; -+ char shortname[16]; -+ u32 target_x; -+ u32 target_y; -+ scaler_t sc; -+ enum flip_mode flip; -+ enum camif_dma_type dma_type; -+ /* 4 pingpong Frame memory */ -+ u8 *pp_virt_buf; -+ dma_addr_t pp_phys_buf; -+ u32 pp_totalsize; -+ u32 pp_num; /* used pingpong memory number */ -+ img_buf_t img_buf[4]; -+ enum camif_codec_fmt fmt; -+ enum camif_capturing exec; -+ camif_perf_t perf; -+ u32 now_frame_num; -+ u32 auto_restart; /* Only For Preview */ -+} camif_cfg_t; -+ -+#ifdef SW_DEBUG -+#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args) -+#else -+#define DPRINTK(fmt, args...) -+#endif -+ -+ -+#ifdef SW_DEBUG -+#define assert(expr) \ -+ if(!(expr)) { \ -+ printk( "Assertion failed! %s,%s,%s,line=%d\n", \ -+ #expr,__FILE__,__FUNCTION__,__LINE__); \ -+ } -+#else -+#define assert(expr) -+#endif -+ -+ -+ -+extern int camif_capture_start(camif_cfg_t *); -+extern int camif_capture_stop(camif_cfg_t *); -+extern int camif_g_frame_num(camif_cfg_t *); -+extern u8 * camif_g_frame(camif_cfg_t *); -+extern int camif_win_offset(camif_gc_t *); -+extern void camif_hw_open(camif_gc_t *); -+extern void camif_hw_close(camif_cfg_t *); -+extern int camif_dynamic_open(camif_cfg_t *); -+extern int camif_dynamic_close(camif_cfg_t *); -+extern void camif_reset(int,int); -+extern void camif_setup_sensor(void); -+extern int camif_g_fifo_status(camif_cfg_t *); -+extern void camif_last_irq_en(camif_cfg_t *); -+extern void camif_change_flip(camif_cfg_t *); -+ -+ -+/* Todo -+ * API Interface function to both Character and V4L2 Drivers -+ */ -+extern int camif_do_write(struct file *,const char *, size_t, loff_t *); -+extern int camif_do_ioctl(struct inode *, struct file *,unsigned int, void *); -+ -+ -+/* -+ * API for Decoder (S5x532, OV7620..) -+ */ -+void camif_register_decoder(struct i2c_client *); -+void camif_unregister_decoder(struct i2c_client*); -+ -+ -+ -+/* API for FSM */ -+#define INSTANT_SKIP 0 -+#define INSTANT_GO 1 -+ -+extern ssize_t camif_p_1fsm_start(camif_cfg_t *); -+extern ssize_t camif_p_2fsm_start(camif_cfg_t *); -+extern ssize_t camif_4fsm_start(camif_cfg_t *); -+extern ssize_t camif_p_stop(camif_cfg_t *); -+extern int camif_enter_p_4fsm(camif_cfg_t *); -+extern int camif_enter_c_4fsm(camif_cfg_t *); -+extern int camif_enter_2fsm(camif_cfg_t *); -+extern int camif_enter_1fsm(camif_cfg_t *); -+extern int camif_check_preview(camif_cfg_t *); -+extern int camif_callback_start(camif_cfg_t *); -+extern int camif_clock_init(camif_gc_t *); -+ -+/* -+ * V4L2 Part -+ */ -+#define VID_HARDWARE_SAMSUNG_FIMC20 236 -+ -+ -+ -+ -+ -+#endif -+ -+ -+/* -+ * Local variables: -+ * tab-width: 8 -+ * c-indent-level: 8 -+ * c-basic-offset: 8 -+ * c-set-style: "K&R" -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/cam_reg.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/cam_reg.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,234 @@ -+ /*---------------------------------------------------------- -+ * (C) 2004 Samsung Electronics -+ * SW.LEE < hitchcar@samsung.com> -+ * -+ ----------------------------------------------------------- */ -+ -+#ifndef __FIMC20_CAMERA_H__ -+#define __FIMC20_CAMERA_H__ -+ -+extern u32 * camregs; -+ -+#ifdef CONFIG_ARCH_S3C24A0 -+#define CAM_BASE_ADD 0x48000000 -+#else /* S3C2440A */ -+#define CAM_BASE_ADD 0x4F000000 -+#endif -+ -+#if ! defined(FExtr) -+#define UData(Data) ((unsigned long) (Data)) -+#define FExtr(Data, Field) \ -+ ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) -+#define FInsrt(Value, Field) \ -+ (UData (Value) << FShft (Field)) -+#define FSize(Field) ((Field) >> 16) -+#define FShft(Field) ((Field) & 0x0000FFFF) -+#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -+#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -+#define F1stBit(Field) (UData (1) << FShft (Field)) -+#define Fld(Size, Shft) (((Size) << 16) + (Shft)) -+#endif -+ -+/* -+ * CAMERA IP -+ * P-port is used as RGB Capturing device which including scale and crop -+ * those who want to see(preview ) the image on display needs RGB image. -+ * -+ * C-port is used as YCbCr(4:2:0, 4:2:2) Capturing device which including the scale and crop -+ * the prefix of C-port have the meaning of "Codec" ex. mpeg4, h263.. which requries the -+ YCBCB format not RGB -+ */ -+ -+#define S3C2440_CAM_REG_CISRCFMT (0x00) // RW Input Source Format -+#define S3C2440_CAM_REG_CIWDOFST (0x04) // Window offset register -+#define S3C2440_CAM_REG_CIGCTRL (0x08) // Global control register -+#define S3C2440_CAM_REG_CICOYSA0 (0x18) // Y 1 st frame start ads -+#define S3C2440_CAM_REG_CICOYSA1 (0x1C) // Y 2 nd frame start ads -+#define S3C2440_CAM_REG_CICOYSA2 (0x20) // Y 3 rd frame start ads -+#define S3C2440_CAM_REG_CICOYSA3 (0x24) // Y 4 th frame start ads -+#define S3C2440_CAM_REG_CICOCBSA0 (0x28) // Cb 1 st frame start ads -+#define S3C2440_CAM_REG_CICOCBSA1 (0x2C) // Cb 2 nd frame start ads -+#define S3C2440_CAM_REG_CICOCBSA2 (0x30) // Cb 3 rd frame start ads -+#define S3C2440_CAM_REG_CICOCBSA3 (0x34) // Cb 4 th frame start ads -+#define S3C2440_CAM_REG_CICOCRSA0 (0x38) // Cr 1 st frame start ads -+#define S3C2440_CAM_REG_CICOCRSA1 (0x3C) // Cr 2 nd frame start ads -+#define S3C2440_CAM_REG_CICOCRSA2 (0x40) // Cr 3 rd frame start ads -+#define S3C2440_CAM_REG_CICOCRSA3 (0x44) // Cr 4 th frame start ads -+#define S3C2440_CAM_REG_CICOTRGFMT (0x48) // Target img format of codec -+#define S3C2440_CAM_REG_CICOCTRL (0x4C) // Codec DMA control related -+#define S3C2440_CAM_REG_CICOSCPRERATIO (0x50) // Codec pre-scaler ratio -+#define S3C2440_CAM_REG_CICOSCPREDST (0x54) // Codec pre-scaler dest -+#define S3C2440_CAM_REG_CICOSCCTRL (0x58) // Codec main-scaler control -+#define S3C2440_CAM_REG_CICOTAREA (0x5C) // Codec pre-scaler dest -+#define S3C2440_CAM_REG_CICOSTATUS (0x64) // Codec path status -+#define S3C2440_CAM_REG_CIPRCLRSA0 (0x6C) // RGB 1 st frame start ads -+#define S3C2440_CAM_REG_CIPRCLRSA1 (0x70) // RGB 2 nd frame start ads -+#define S3C2440_CAM_REG_CIPRCLRSA2 (0x74) // RGB 3 rd frame start ads -+#define S3C2440_CAM_REG_CIPRCLRSA3 (0x78) // RGB 4 th frame start ads -+#define S3C2440_CAM_REG_CIPRTRGFMT (0x7C) // Target img fmt of preview -+#define S3C2440_CAM_REG_CIPRCTRL (0x80) // Preview DMA ctl related -+#define S3C2440_CAM_REG_CIPRSCPRERATIO (0x84) // Preview pre-scaler ratio -+#define S3C2440_CAM_REG_CIPRSCPREDST (0x88) // Preview pre-scaler dest -+#define S3C2440_CAM_REG_CIPRSCCTRL (0x8C) // Preview main-scaler ctl -+#define S3C2440_CAM_REG_CIPRTAREA (0x90) // Preview pre-scaler dest -+#define S3C2440_CAM_REG_CIPRSTATUS (0x98) // Preview path status -+#define S3C2440_CAM_REG_CIIMGCPT (0xA0) // Image capture enable cmd -+ -+#define S3C2440_CAM_REG_CICOYSA(__x) (0x18 + (__x)*4 ) -+#define S3C2440_CAM_REG_CICOCBSA(__x) (0x28 + (__x)*4 ) -+#define S3C2440_CAM_REG_CICOCRSA(__x) (0x38 + (__x)*4 ) -+#define S3C2440_CAM_REG_CIPRCLRSA(__x) (0x6C + (__x)*4 ) -+ -+/* CISRCFMT BitField */ -+#define SRCFMT_ITU601 BIT31 -+#define SRCFMT_ITU656 0 -+#define SRCFMT_UVOFFSET_128 BIT30 -+#define fCAM_SIZE_H Fld(13, 16) -+#define fCAM_SIZE_V Fld(13, 0) -+#define SOURCE_HSIZE(x) FInsrt((x), fCAM_SIZE_H) -+#define SOURCE_VSIZE(x) FInsrt((x), fCAM_SIZE_V) -+ -+ -+/* Window Option Register */ -+#define WINOFEN BIT31 -+#define CO_FIFO_Y BIT30 -+#define CO_FIFO_CB BIT15 -+#define CO_FIFO_CR BIT14 -+#define PR_FIFO_CB BIT13 -+#define PR_FIFO_CR BIT12 -+#define fWINHOR Fld(11, 16) -+#define fWINVER Fld(11, 0) -+#define WINHOROFST(x) FInsrt((x), fWINHOR) -+#define WINVEROFST(x) FInsrt((x), fWINVER) -+ -+/* Global Control Register */ -+#define GC_SWRST BIT31 -+#define GC_CAMRST BIT30 -+#define GC_INVPOLPCLK BIT26 -+#define GC_INVPOLVSYNC BIT25 -+#define GC_INVPOLHREF BIT24 -+ -+/*-------------------------------------------------- -+ REGISTER BIT FIELD DEFINITION TO -+ YCBCR and RGB -+----------------------------------------------------*/ -+/* Codec Target Format Register */ -+#define IN_YCBCR420 0 -+#define IN_YCBCR422 BIT31 -+#define OUT_YCBCR420 0 -+#define OUT_YCBCR422 BIT30 -+ -+#if 0 -+#define FLIP_NORMAL 0 -+#define FLIP_X (BIT14) -+#define FLIP_Y (BIT15) -+#define FLIP_MIRROR (BIT14|BIT15) -+#endif -+ -+/** BEGIN ************************************/ -+/* Cotents: Common in both P and C port */ -+#define fTARGET_HSIZE Fld(13,16) -+#define TARGET_HSIZE(x) FInsrt((x), fTARGET_HSIZE) -+#define fTARGET_VSIZE Fld(13,0) -+#define TARGET_VSIZE(x) FInsrt((x), fTARGET_VSIZE) -+#define FLIP_X_MIRROR BIT14 -+#define FLIP_Y_MIRROR BIT15 -+#define FLIP_180_MIRROR (BIT14 | BIT15) -+/** END *************************************/ -+ -+/* Codec DMA Control Register */ -+#define fYBURST_M Fld(5,19) -+#define fYBURST_R Fld(5,14) -+#define fCBURST_M Fld(5,9) -+#define fCBURST_R Fld(5,4) -+#define YBURST_M(x) FInsrt((x), fYBURST_M) -+#define CBURST_M(x) FInsrt((x), fCBURST_M) -+#define YBURST_R(x) FInsrt((x), fYBURST_R) -+#define CBURST_R(x) FInsrt((x), fCBURST_R) -+#define LAST_IRQ_EN BIT2 /* Common in both P and C port */ -+/* -+ * Check the done signal of capturing image for JPEG -+ * !!! AutoClear Bit -+ */ -+ -+ -+/* (Codec, Preview ) Pre-Scaler Control Register 1 */ -+#define fSHIFT Fld(4,28) -+#define PRE_SHIFT(x) FInsrt((x), fSHIFT) -+#define fRATIO_H Fld(7,16) -+#define PRE_HRATIO(x) FInsrt((x), fRATIO_H) -+#define fRATIO_V Fld(7,0) -+#define PRE_VRATIO(x) FInsrt((x), fRATIO_V) -+ -+/* (Codec, Preview ) Pre-Scaler Control Register 2*/ -+#define fDST_WIDTH Fld(12,16) -+#define fDST_HEIGHT Fld(12,0) -+#define PRE_DST_WIDTH(x) FInsrt((x), fDST_WIDTH) -+#define PRE_DST_HEIGHT(x) FInsrt((x), fDST_HEIGHT) -+ -+ -+/* (Codec, Preview) Main-scaler control Register */ -+#define S_METHOD BIT31 /* Sampling method only for P-port */ -+#define SCALERSTART BIT15 -+/* Codec scaler bypass for upper 2048x2048 -+ where ImgCptEn_CoSC and ImgCptEn_PrSC should be 0 -+*/ -+ -+#define SCALERBYPASS BIT31 -+#define RGB_FMT24 BIT30 -+#define RGB_FMT16 0 -+ -+/* -+#define SCALE_UP_H BIT29 -+#define SCALE_UP_V BIT28 -+*/ -+ -+#define fMAIN_HRATIO Fld(9, 16) -+#define MAIN_HRATIO(x) FInsrt((x), fMAIN_HRATIO) -+ -+#define SCALER_START BIT15 -+ -+#define fMAIN_VRATIO Fld(9, 0) -+#define MAIN_VRATIO(x) FInsrt((x), fMAIN_VRATIO) -+ -+/* (Codec, Preview ) DMA Target AREA Register */ -+#define fCICOTAREA Fld(26,0) -+#define TARGET_DMA_AREA(x) FInsrt((x), fCICOTAREA) -+ -+/* Preview DMA Control Register */ -+#define fRGBURST_M Fld(5,19) -+#define fRGBURST_R Fld(5,14) -+#define RGBURST_M(x) FInsrt((x), fRGBURST_M) -+#define RGBURST_R(x) FInsrt((x), fRGBURST_R) -+ -+ -+/* (Codec, Preview) Status Register */ -+#define CO_OVERFLOW_Y BIT31 -+#define CO_OVERFLOW_CB BIT30 -+#define CO_OVERFLOW_CR BIT29 -+#define PR_OVERFLOW_CB BIT31 -+#define PR_OVERFLOW_CR BIT30 -+ -+#define VSYNC BIT28 -+ -+#define fFRAME_CNT Fld(2,26) -+#define FRAME_CNT(x) FExtr((x),fFRAME_CNT) -+ -+#define WIN_OFF_EN BIT25 -+#define fFLIP_MODE Fld(2,23) -+#define FLIP_MODE(x) EExtr((x), fFLIP_MODE) -+#define CAP_STATUS_CAMIF BIT22 -+#define CAP_STATUS_CODEC BIT21 -+#define CAP_STATUS_PREVIEW BIT21 -+#define VSYNC_A BIT20 -+#define VSYNC_B BIT19 -+ -+/* Image Capture Enable Regiser */ -+#define CAMIF_CAP_ON BIT31 -+#define CAMIF_CAP_CODEC_ON BIT30 -+#define CAMIF_CAP_PREVIEW_ON BIT29 -+ -+ -+ -+ -+#endif /* S3C2440_CAMER_H */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/imgsensor.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/imgsensor.c 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,250 @@ -+/* -+ * Copyright (C) 2004 Samsung Electronics -+ * SW.LEE -+ * -+ * Copyright (C) 2000 Russell King : pcf8583.c -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Driver for FIMC20 Camera Decoder -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+#ifdef CONFIG_ARCH_S3C24A0A -+#else -+//#include -+#endif -+ -+#define SW_DEBUG -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "sensor.h" -+ -+#ifndef SAMSUNG_SXGA_CAM -+#include "s5x532_rev36.h" -+#else -+#include "sxga.h" -+#endif -+ -+static struct i2c_driver s5x532_driver; -+static camif_gc_t data = { -+ itu_fmt: CAMIF_ITU601, -+ order422: CAMIF_YCBYCR, -+ camclk: 24000000, -+#ifndef SAMSUNG_SXGA_CAM -+ source_x: 640, -+ source_y: 480, -+ win_hor_ofst: 112, -+ win_ver_ofst: 20, -+#else -+ source_x: 1280, -+ source_y: 1024, -+ win_hor_ofst: 0, -+ win_ver_ofst: 0, -+#endif -+ polarity_pclk:1, -+ polarity_href:0, -+#ifdef CONFIG_ARCH_S3C24A0A -+ reset_type:CAMIF_EX_RESET_AL, /* Active Low */ -+#else -+ reset_type:CAMIF_EX_RESET_AH, /* Ref board has inverted signal */ -+#endif -+ reset_udelay:2000, -+}; -+ -+#define CAM_ID 0x5a -+ -+static unsigned short ignore = I2C_CLIENT_END; -+static unsigned short normal_addr[] = { (CAM_ID>>1), I2C_CLIENT_END }; -+static struct i2c_client_address_data addr_data = { -+ normal_i2c: normal_addr, -+ probe: &ignore, -+ ignore: &ignore, -+}; -+ -+s5x532_t s5x532_regs_mirror[S5X532_REGS]; -+ -+unsigned char -+s5x532_read(struct i2c_client *client, unsigned char subaddr) -+{ -+ int ret; -+ unsigned char buf[1]; -+ struct i2c_msg msg ={ client->addr, 0, 1, buf}; -+ buf[0] = subaddr; -+ -+ ret = i2c_transfer(client->adapter,&msg, 1) == 1 ? 0 : -EIO; -+ if (ret == -EIO) { -+ printk(" I2C write Error \n"); -+ return -EIO; -+ } -+ -+ msg.flags = I2C_M_RD; -+ ret = i2c_transfer(client->adapter, &msg, 1) == 1 ? 0 : -EIO; -+ -+ return buf[0]; -+} -+ -+ -+static int -+s5x532_write(struct i2c_client *client, -+ unsigned char subaddr, unsigned char val) -+{ -+ unsigned char buf[2]; -+ struct i2c_msg msg = { client->addr, 0, 2, buf}; -+ -+ buf[0]= subaddr; -+ buf[1]= val; -+ -+ return i2c_transfer(client->adapter, &msg, 1) == 1 ? 0 : -EIO; -+} -+ -+void inline s5x532_init(struct i2c_client *sam_client) -+{ -+ int i; -+ -+ printk(KERN_ERR "s5x532_init \n"); -+ for (i = 0; i < S5X532_INIT_REGS; i++) { -+ s5x532_write(sam_client, -+ s5x532_reg[i].subaddr, s5x532_reg[i].value ); -+ } -+ -+#ifdef YOU_WANT_TO_CHECK_IMG_SENSOR -+ for (i = 0; i < S5X532_INIT_REGS;i++) { -+ if ( s5x532_reg[i].subaddr == PAGE_ADDRESS ) { -+ s5x532_write(sam_client, -+ s5x532_reg[i].subaddr, s5x532_reg[i].value); -+ -+ printk(KERN_ERR "Page: Subaddr %02x = 0x%02x\n", -+ s5x532_reg[i].subaddr, s5x532_regs_mirror[i].value); -+ -+ -+ } else -+ { -+ s5x532_regs_mirror[i].subaddr = s5x532_reg[i].subaddr; -+ s5x532_regs_mirror[i].value = -+ s5x532_read(sam_client,s5x532_reg[i].subaddr); -+ printk(KERN_ERR "Subaddr %02x = 0x%02x\n", -+ s5x532_reg[i].subaddr, s5x532_regs_mirror[i].value); -+ } -+ } -+#endif -+ -+} -+ -+static int -+s5x532_attach(struct i2c_adapter *adap, int addr, int kind) -+{ -+ struct i2c_client *c; -+ -+ c = kmalloc(sizeof(*c), GFP_KERNEL); -+ if (!c) return -ENOMEM; -+ -+ strcpy(c->name, "S5X532"); -+// c->id = s5x532_driver.id; -+ c->flags = 0 /* I2C_CLIENT_ALLOW_USE */; -+ c->addr = addr; -+ c->adapter = adap; -+ c->driver = &s5x532_driver; -+ data.sensor = c; -+ i2c_set_clientdata(c, &data); -+ -+ camif_register_decoder(c); -+ return i2c_attach_client(c); -+} -+ -+static int s5x532_probe(struct i2c_adapter *adap) -+{ -+ return i2c_probe(adap, &addr_data, s5x532_attach); -+} -+ -+static int s5x532_detach(struct i2c_client *client) -+{ -+ i2c_detach_client(client); -+ camif_unregister_decoder(client); -+ return 0; -+} -+ -+static int -+s5x532_command(struct i2c_client *client, unsigned int cmd, void *arg) -+{ -+ switch (cmd) { -+ case SENSOR_INIT: -+ s5x532_init(client); -+ printk(KERN_INFO "CAMERA: S5X532 Sensor initialized\n"); -+ break; -+ case USER_ADD: -+ /* MOD_INC_USE_COUNT; uh.. 2.6 deals with this, old-timer */ -+ break; -+ case USER_EXIT: -+ /* MOD_DEC_USE_COUNT; */ -+ break; -+/* Todo -+ case SENSOR_BRIGHTNESS: -+ change_sensor(); -+ break; -+*/ -+ default: -+ panic("Unexpect Sensor Command \n"); -+ break; -+ } -+ return 0; -+} -+ -+static struct i2c_driver s5x532_driver = { -+ driver: { name: "S5X532" }, -+ id: 0, /* optional in i2c-id.h I2C_ALGO_S3C, */ -+ attach_adapter: s5x532_probe, -+ detach_client: s5x532_detach, -+ command: s5x532_command -+}; -+ -+static void iic_gpio_port(void) -+{ -+/* FIXME: no gpio config for i2c !!! -+#ifdef CONFIG_ARCH_S3C24A0A -+#else -+ GPECON &= ~(0xf <<28); -+ GPECON |= 0xa <<28; -+#endif -+*/ -+} -+ -+static __init int camif_sensor_init(void) -+{ -+ iic_gpio_port(); -+ return i2c_add_driver(&s5x532_driver); -+} -+ -+ -+static __init void camif_sensor_exit(void) -+{ -+ i2c_del_driver(&s5x532_driver); -+} -+ -+module_init(camif_sensor_init) -+module_exit(camif_sensor_exit) -+ -+MODULE_AUTHOR("SW.LEE "); -+MODULE_DESCRIPTION("I2C Client Driver For Fimc2.0 MISC Driver"); -+MODULE_LICENSE("GPL"); -+ -+ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/Kconfig 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,7 @@ -+ -+config S3C2440_CAMERA -+ bool "S3C24xx Camera interface" -+ depends on ARCH_S3C2410 -+ help -+ Camera driver for S3C2440 camera unit -+ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/Makefile 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,8 @@ -+obj-$(CONFIG_S3C2440_CAMERA) += \ -+ videodev.o \ -+ imgsensor.o \ -+ video-driver.o \ -+ camif.o \ -+ camif_fsm.o \ -+ qt-driver.o -+ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/miscdevice.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/miscdevice.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,18 @@ -+ -+ /*---------------------------------------------------------- -+ * (C) 2004 Samsung Electronics -+ * SW.LEE < hitchcar@samsung.com> -+ * -+ ----------------------------------------------------------- */ -+ -+#ifndef _LINUX_S3C_MISCDEVICE_H -+#define _LINUX_S3C_MISCDEVICE_H -+ -+#define CODEC_MINOR 212 -+#define PREVIEW_MINOR 213 -+ -+ -+ -+ -+ -+#endif -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/qt-driver.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/qt-driver.c 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,172 @@ -+/* -+ * SW.LEE -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+//#define SW_DEBUG -+ -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "miscdevice.h" -+#include "cam_reg.h" -+#include "sensor.h" -+#include "userapp.h" -+ -+extern camif_cfg_t * get_camif(int nr); -+ -+ -+/************************* Sharp Zarus API ************************** -+* refering to Camera Driver API for SL-5000D/SL-5600 revision 1.00 -+* April 11, 2002. -+ SW.LEE -+ I want to use Sharp Camera Application. -+* -+*/ -+ -+#define READ_MODE_STATUS 0x1 -+#define READ_MODE_IMAGE 0x0 -+#define CAPTURE_SPEED -+#define H_FLIP -+#define V_FLIP -+typedef enum sharp_readmode -+{ -+ IMAGE = 0, STATUS = 1, -+ FASTER = 0, BETTER = 2, -+ XNOFLIP = 0, XFLIP = 4, -+ YNOFLIP = 0, YFLIP = 8, -+ AUTOMATICFLIP = -1 -+} ReadMode_t; -+ -+ -+static struct sharp_param_t { -+ ReadMode_t readMode; -+ char CameraStatus[4]; -+} sharp_param = { STATUS, {'s','m','c','A'}}; -+ -+ -+camif_param_t qt_parm = { 640,480,240,320,16,0}; -+ -+static void setReadMode(const char *b,size_t count) -+{ -+ int i = *(b+2) - 48 ; -+ if ( 4 == count ) { -+ i = (*(b+3) - 48) + i * 10; -+ } -+ -+ // DPRINTK(" setReadMode %s conversion value %d \n",b , i); -+ if ( i & STATUS ) { -+ // DPRINTK(" STATUS MODE \n"); -+ sharp_param.readMode = i; -+ } -+ else { -+ // DPRINTK(" IMAGE MODE \n"); -+ sharp_param.readMode = i; -+ } -+} -+ -+ -+ -+ -+extern ssize_t camif_p_read(struct file *, char *, size_t , loff_t *); -+ -+ssize_t z_read(struct file *f, char *buf, size_t count, loff_t *pos) -+{ -+ size_t end; -+ -+ if (sharp_param.readMode & STATUS ) { -+ buf[0] = sharp_param.CameraStatus[0]; -+ buf[1] = sharp_param.CameraStatus[1]; -+ buf[2] = sharp_param.CameraStatus[2]; -+ buf[3] = sharp_param.CameraStatus[3]; -+ end = 4; -+ return end; -+ } -+ else { /* Image ReadMode */ -+ /* -+ if (( sharp_param.readMode & (BETTER|X FLIP|YFLIP))) -+ DPRINTK(" Not Supporting BETTER|XFLIP|YFLIP\n"); -+ */ -+ return camif_p_read(f,buf,count,pos); -+ } -+} -+ -+static void z_config(camif_cfg_t *cfg,int x, int y) -+{ -+ cfg->target_x = x; -+ cfg->target_y = y; -+ cfg->fmt = CAMIF_RGB16; -+ if (camif_dynamic_open(cfg)) { -+ panic(" Eror Happens \n"); -+ } -+} -+ -+ -+ssize_t z_write(struct file *f, const char *b, size_t c, loff_t *pos) -+{ -+ int array[5]; -+ int zoom = 1; -+ camif_cfg_t *cfg; -+ -+ cfg = get_camif(MINOR(f->f_dentry->d_inode->i_rdev)); -+// DPRINTK(" param %s count %d \n",b, c ); -+ -+ switch(*b) { -+ case 'M': -+ setReadMode(b, c); -+ break; -+ case 'B': /* Clear the latch flag of shutter button */ -+ DPRINTK(" clear latch flag of camera's shutter button\n"); -+ sharp_param.CameraStatus[0]='s'; -+ break; -+ case 'Y': /* I don't know how to set Shutter pressed */ -+ DPRINTK(" set latch flag n"); -+ sharp_param.CameraStatus[0]='S'; -+ break; -+ case 'S': /* Camera Image Resolution */ -+ case 'R': /* Donot support Rotation */ -+ DPRINTK(" param %s count %d \n",b, c ); -+ get_options((char *)(b+2), 5, array); -+ if ( array[3] == 512 ) zoom = 2; -+ z_config(cfg, array[1] * zoom , array[2] * zoom ); -+ camif_4fsm_start(cfg); -+ break; -+ case 'C': -+ DPRINTK(" param %s count %d \n",b, c ); -+ DPRINTK(" Start the camera to capture \n"); -+ sharp_param.CameraStatus[2]='C'; -+ camif_4fsm_start(cfg); -+ break; -+ default: -+ printk("Unexpected param %s count %d \n",b, c ); -+ } -+ -+ return c; -+} -+ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/qt.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/qt.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,18 @@ -+/* -+ * SW.LEE -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+#ifndef __Z_API_H_ -+#define __Z_API_H_ -+ -+extern ssize_t z_read(struct file *f, char *buf, size_t count, loff_t *pos); -+extern ssize_t z_write(struct file *f, const char *b, size_t c, loff_t *pos); -+ -+ -+ -+#endif -+ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/s5x532.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/s5x532.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,143 @@ -+/* -+ * 2004 (C) Samsung Electronics -+ * SW.LEE -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+ -+#ifndef _SMDK2440_S5X532_H_ -+#define _SMDK2440_S5X532_H_ -+ -+ -+#define CHIP_DELAY 0xFF -+ -+typedef struct samsung_t{ -+ unsigned char subaddr; -+ unsigned char value; -+ unsigned char page; -+} s5x532_t; -+ -+s5x532_t s5x532_reg[] = { -+ // page 5 -+ {0xec,0x05}, -+ {0x08,0x55,0x5}, -+ {0x0a,0x75,0x5}, -+ {0x0c,0x90,0x5}, -+ {0x0e,0x18,0x5}, -+ {0x12,0x09,0x5}, -+ {0x14,0x9d,0x5}, -+ {0x16,0x90,0x5}, -+ {0x1a,0x18,0x5}, -+ {0x1c,0x0c,0x5}, -+ {0x1e,0x09,0x5}, -+ {0x20,0x06,0x5}, -+ {0x22,0x20,0x5}, -+ {0x2a,0x00,0x5}, -+ {0x2d,0x04,0x5}, -+ {0x12,0x24,0x5}, -+ // page 3 -+ {0xec,0x03,0x3}, -+ {0x0c,0x09,0x3}, -+ {0x6c,0x09,0x3}, -+ {0x2b,0x10,0x3}, // momo clock inversion -+ // page 2 -+ {0xec,0x02,0x2}, -+ {0x03,0x09,0x2}, -+ {0x05,0x08,0x2}, -+ {0x06,0x01,0x2}, -+ {0x07,0xf8,0x2}, -+ {0x15,0x25,0x2}, -+ {0x30,0x29,0x2}, -+ {0x36,0x12,0x2}, -+ {0x38,0x04,0x2}, -+ {0x1b,0x77,0x2}, // 24MHz : 0x77, 12MHz : 0x22 -+ {0x1c,0x77,0x2}, // 24MHz : 0x77, 12MHz : 0x22 -+ // page 1 -+ {0xec,0x01,0x1}, -+ {0x00,0x03,0x1}, // -+ {0x0a,0x08,0x1}, // 0x0-QQVGA, 0x06-CIF, 0x02-QCIF, 0x08-VGA, 0x04-QVGA, 0x0a-SXGA -+ {0x0c,0x00,0x1}, // Pattern selectio. 0-CIS, 1-Color bar, 2-Ramp, 3-Blue screen -+ {0x10,0x27,0x1}, -+ // 0x21-ITU-R656(CrYCbY), 0x25-ITU-R601(CrYCbY), 0x26-ITU-R601(YCbYCr) -+ {0x50,0x21,0x1}, // Hblank -+ {0x51,0x00,0x1}, // Hblank -+ {0x52,0xA1,0x1}, // Hblank -+ {0x53,0x02,0x1}, // Hblank -+ {0x54,0x01,0x1}, // Vblank -+ {0x55,0x00,0x1}, // Vblank -+ {0x56,0xE1,0x1}, // Vblank -+ {0x57,0x01,0x1}, // Vblank -+ {0x58,0x21,0x1}, // Hsync -+ {0x59,0x00,0x1}, // Hsync -+ {0x5a,0xA1,0x1}, // Hsync -+ {0x5b,0x02,0x1}, // Hsync -+ {0x5c,0x03,0x1}, // Vref -+ {0x5d,0x00,0x1}, // Vref -+ {0x5e,0x05,0x1}, // Vref -+ {0x5f,0x00,0x1}, // Vref -+ {0x70,0x0E,0x1}, -+ {0x71,0xD6,0x1}, -+ {0x72,0x30,0x1}, -+ {0x73,0xDB,0x1}, -+ {0x74,0x0E,0x1}, -+ {0x75,0xD6,0x1}, -+ {0x76,0x18,0x1}, -+ {0x77,0xF5,0x1}, -+ {0x78,0x0E,0x1}, -+ {0x79,0xD6,0x1}, -+ {0x7a,0x28,0x1}, -+ {0x7b,0xE6,0x1}, -+ {0x50,0x00,0x1}, -+ {0x5c,0x00,0x1}, -+ -+ // page 0 -+ {0xec,0x00,0x0}, -+ {0x79,0x01,0x0}, -+ {0x58,0x90,0x0}, -+ {0x59,0xA0,0x0}, -+ {0x5a,0x50,0x0}, -+ {0x5b,0x70,0x0}, -+ {0x5c,0xD0,0x0}, -+ {0x5d,0xC0,0x0}, -+ {0x5e,0x28,0x0}, -+ {0x5f,0x08,0x0}, -+ {0x50,0x90,0x0}, -+ {0x51,0xA0,0x0}, -+ {0x52,0x50,0x0}, -+ {0x53,0x70,0x0}, -+ {0x54,0xD0,0x0}, -+ {0x55,0xC0,0x0}, -+ {0x56,0x28,0x0}, -+ {0x57,0x00,0x0}, -+ {0x48,0x90,0x0}, -+ {0x49,0xA0,0x0}, -+ {0x4a,0x50,0x0}, -+ {0x4b,0x70,0x0}, -+ {0x4c,0xD0,0x0}, -+ {0x4d,0xC0,0x0}, -+ {0x4e,0x28,0x0}, -+ {0x4f,0x08,0x0}, -+ {0x72,0x82,0x0}, // main clock = 24MHz:0xd2, 16M:0x82, 12M:0x54 -+ {0x75,0x05,0x0} // absolute vertical mirror. junon -+ -+}; -+ -+ -+#define S5X532_INIT_REGS (sizeof(s5x532_reg)/sizeof(s5x532_reg[0])) -+#define S5X532_RISC_REGS 0xEB -+#define S5X532_ISP_REGS 0xFB /* S5C7323X */ -+#define S5X532_CIS_REGS 0x2F /* S5K437LA03 */ -+ -+ -+#define PAGE_ADDRESS 0xEC -+ -+//#define S5X532_REGS (S5X532_RISC_REGS+S5X532_ISP_REGS+S5X532_CIS_REGS) -+#define S5X532_REGS (0x1000) -+ -+ -+ -+#endif -+ -+ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/s5x532_rev36.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/s5x532_rev36.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,208 @@ -+/* -+ * 2004 (C) Samsung Electronics -+ * SW.LEE -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+ -+#ifndef _SMDK2440_S5X532_H_ -+#define _SMDK2440_S5X532_H_ -+ -+ -+#define CHIP_DELAY 0xFF -+ -+typedef struct samsung_t{ -+ unsigned char subaddr; -+ unsigned char value; -+ unsigned char page; -+} s5x532_t; -+ -+s5x532_t s5x532_reg[] = { -+ -+ //=============== page0 ===============// -+ {0xec,0x00,0x00}, -+ {0x02,0x00,0x00}, -+ {0x14,0x60,0x00}, -+ {0x15,0x60,0x00}, -+ {0x16,0x60,0x00}, -+ {0x1b,0x20,0x00}, -+ {0x1c,0x20,0x00}, -+ {0x1d,0x20,0x00}, -+ {0x1e,0x20,0x00}, -+ {0x72,0xdc,0x00}, -+ {0x73,0x11,0x00}, -+ {0x76,0x82,0x00}, -+ {0x77,0x90,0x00}, -+ {0x78,0x6c,0x00}, -+ {0x0a,0x02,0x00}, -+ {0x34,0x0d,0x00}, -+ {0x35,0x0a,0x00}, -+ {0x36,0x05,0x00}, -+ {0x37,0x05,0x00}, -+ {0x38,0x06,0x00}, -+ {0x39,0x08,0x00}, -+ {0x3A,0x0d,0x00}, -+ {0x3B,0x0d,0x00}, -+ {0x3C,0x18,0x00}, -+ {0x3D,0xE0,0x00}, -+ {0x3E,0x20,0x00}, -+ {0x66,0x02,0x00}, -+ {0x6c,0x40,0x00}, -+ {0x7c,0x01,0x00}, -+ {0x0D,0x24,0x00}, -+ {0x40,0x1B,0x00}, -+ {0x41,0x4F,0x00}, -+ {0x42,0x24,0x00}, -+ {0x43,0x3E,0x00}, -+ {0x44,0x32,0x00}, -+ {0x45,0x30,0x00}, -+ {0x48,0xa0,0x00}, -+ {0x49,0xd0,0x00}, -+ {0x4A,0x28,0x00}, -+ {0x4B,0x7d,0x00}, -+ {0x4C,0xd0,0x00}, -+ {0x4D,0xe0,0x00}, -+ {0x4E,0x1a,0x00}, -+ {0x4F,0xa0,0x00}, -+ {0x50,0xc0,0x00}, -+ {0x51,0xc0,0x00}, -+ {0x52,0x42,0x00}, -+ {0x53,0x7e,0x00}, -+ {0x54,0xc0,0x00}, -+ {0x55,0xf0,0x00}, -+ {0x56,0x1e,0x00}, -+ {0x57,0xe0,0x00}, -+ {0x58,0xc0,0x00}, -+ {0x59,0xa0,0x00}, -+ {0x5A,0x4a,0x00}, -+ {0x5B,0x7e,0x00}, -+ {0x5C,0xc0,0x00}, -+ {0x5D,0xf0,0x00}, -+ {0x5E,0x2a,0x00}, -+ {0x5F,0x10,0x00}, -+ {0x79,0x00,0x00}, -+ {0x7a,0x00,0x00}, -+ {0xe0,0x0f,0x00}, -+ {0xe3,0x14,0x00}, -+ {0xe5,0x48,0x00}, -+ {0xe7,0x58,0x00}, -+ -+ //=============== page1 ===============// -+ {0xec,0x01,0x01}, -+ {0x10,0x05,0x01}, -+ {0x20,0xde,0x01}, -+ {0x0b,0x06,0x01}, -+ {0x30,0x00,0x01}, -+ {0x31,0x00,0x01}, -+ {0x32,0x00,0x01}, -+ {0x24,0x28,0x01}, -+ {0x25,0x3F,0x01}, -+ {0x26,0x65,0x01}, -+ {0x27,0xA1,0x01}, -+ {0x28,0xFF,0x01}, -+ {0x29,0x96,0x01}, -+ {0x2A,0x85,0x01}, -+ {0x2B,0xFF,0x01}, -+ {0x2C,0x00,0x01}, -+ {0x2D,0x1B,0x01}, -+ {0xB0,0x28,0x01}, -+ {0xB1,0x3F,0x01}, -+ {0xB2,0x65,0x01}, -+ {0xB3,0xA1,0x01}, -+ {0xB4,0xFF,0x01}, -+ {0xB5,0x96,0x01}, -+ {0xB6,0x85,0x01}, -+ {0xB7,0xFF,0x01}, -+ {0xB8,0x00,0x01}, -+ {0xB9,0x1B,0x01}, -+ {0x15,0x15,0x01}, -+ {0x18,0x85,0x01}, -+ {0x1f,0x05,0x01}, -+ {0x87,0x40,0x01}, -+ {0x37,0x60,0x01}, -+ {0x38,0xd5,0x01}, -+ {0x48,0xa0,0x01}, -+ {0x61,0x54,0x01}, -+ {0x62,0x54,0x01}, -+ {0x63,0x14,0x01}, -+ {0x64,0x14,0x01}, -+ {0x6d,0x12,0x01}, -+ {0x78,0x09,0x01}, -+ {0x79,0xD7,0x01}, -+ {0x7A,0x14,0x01}, -+ {0x7B,0xEE,0x01}, -+ -+ //=============== page2 ===============// -+ {0xec,0x02,0x02}, -+ {0x2c,0x76,0x02}, -+ {0x25,0x25,0x02}, -+ {0x27,0x27,0x02}, -+ {0x30,0x29,0x02}, -+ {0x36,0x08,0x02}, -+ {0x38,0x04,0x02}, -+ -+ //=============== page3 ===============// -+ {0xec,0x03,0x03}, -+ {0x08,0x00,0x03}, -+ {0x09,0x33,0x03}, -+ -+ //=============== page4 ===============// -+ {0xec,0x04,0x04}, -+ {0x00,0x21,0x04}, -+ {0x01,0x00,0x04}, -+ {0x02,0x9d,0x04}, -+ {0x03,0x02,0x04}, -+ {0x04,0x04,0x04}, -+ {0x05,0x00,0x04}, -+ {0x06,0x1f,0x04}, -+ {0x07,0x02,0x04}, -+ {0x08,0x21,0x04}, -+ {0x09,0x00,0x04}, -+ {0x0a,0x9d,0x04}, -+ {0x0b,0x02,0x04}, -+ {0x0c,0x04,0x04}, -+ {0x0d,0x00,0x04}, -+ {0x0e,0x20,0x04}, -+ {0x0f,0x02,0x04}, -+ {0x1b,0x3c,0x04}, -+ {0x1c,0x3c,0x04}, -+ -+ //=============== page5 ===============// -+ {0xec,0x05,0x05}, -+ {0x1f,0x00,0x05}, -+ {0x08,0x59,0x05}, -+ {0x0a,0x71,0x05}, -+ {0x1e,0x23,0x05}, -+ {0x0e,0x3c,0x05}, -+ -+ //=============== page7 ===============// -+ {0xec,0x07,0x07}, -+ {0x11,0xfe,0x07}, -+ -+ // added by junon -+ {0xec,0x01,0x07}, -+ {0x10,0x26,0x07}, -+ // 0x21-ITU-R656(CbYCrY), 0x25-ITU-R601(CbYCrY), 0x26-ITU-R601(YCrYCb) -+ -+ -+}; -+ -+ -+#define S5X532_INIT_REGS (sizeof(s5x532_reg)/sizeof(s5x532_reg[0])) -+#define S5X532_RISC_REGS 0xEB -+#define S5X532_ISP_REGS 0xFB /* S5C7323X */ -+#define S5X532_CIS_REGS 0x2F /* S5K437LA03 */ -+ -+ -+#define PAGE_ADDRESS 0xEC -+ -+//#define S5X532_REGS (S5X532_RISC_REGS+S5X532_ISP_REGS+S5X532_CIS_REGS) -+#define S5X532_REGS (0x1000) -+ -+ -+ -+#endif -+ -+ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/sensor.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/sensor.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,20 @@ -+/* -+ * -+ * Copyright (C) 2004 Samsung Electronics -+ * SW.LEE -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __SENSOR_CMD_H_ -+#define __SENSOR_CMD_H_ -+ -+#include "bits.h" -+ -+#define SENSOR_INIT BIT0 -+#define USER_ADD BIT1 -+#define USER_EXIT BIT2 -+ -+#endif -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/sxga.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/sxga.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,504 @@ -+/* -+ * 2004 (C) Samsung Electronics -+ * SW.LEE -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+ -+#ifndef _SAMSUNG_SXGA_H_ -+#define _SAMSUNG_SXGA_H_ -+ -+ -+#define CHIP_DELAY 0xFF -+ -+typedef struct samsung_t{ -+ unsigned char subaddr; -+ unsigned char value; -+ unsigned char page; -+} s5x532_t; -+ -+s5x532_t s5x532_reg[] = { -+ // page 0 -+ {0xec,0x00,0x0}, -+ {0x0c,0x38,0x0}, -+ {0x0d,0x24,0x0}, -+ {0x13,0x10,0x0}, -+ {0x14,0x10,0x0}, -+ {0x15,0x10,0x0}, -+ {0x16,0x10,0x0}, -+ {0x17,0x20,0x0}, -+ {0x18,0x30,0x0}, -+ {0x19,0x30,0x0}, -+ {0x1a,0x10,0x0}, -+ {0x1b,0x10,0x0}, -+ -+ {0x2d,0x40,0x0}, -+ {0x3e,0x10,0x0}, -+ {0x34,0x0a,0x0}, -+ {0x39,0x04,0x0}, -+ {0x3a,0x02,0x0}, -+ {0x31,0x05,0x0}, -+ -+ {0x40,0x1d,0x0}, -+ {0x41,0x50,0x0}, -+ {0x42,0x24,0x0}, -+ {0x43,0x3f,0x0}, -+ {0x44,0x30,0x0}, -+ {0x45,0x31,0x0}, -+ -+ {0x48,0xa0,0x0}, -+ {0x49,0xc0,0x0}, -+ {0x4a,0x58,0x0}, -+ {0x4b,0x50,0x0}, -+ {0x4c,0xb0,0x0}, -+ {0x4d,0xc0,0x0}, -+ {0x4e,0x30,0x0}, -+ {0x4f,0x20,0x0}, -+ -+ {0x50,0xa0,0x0}, -+ {0x51,0xc0,0x0}, -+ {0x52,0x50,0x0}, -+ {0x53,0x60,0x0}, -+ {0x54,0xb0,0x0}, -+ {0x55,0xc0,0x0}, -+ {0x56,0x20,0x0}, -+ {0x57,0x08,0x0}, -+// {0x72,0x50,0x0}, // Clock 16 -+ {0x72,0x78,0x0}, // Clock 24Mhz -+// {0x72,0xf0,0x0}, // Clock 48Mhz -+ // page 1 -+ {0xec,0x01,0x1}, -+ {0x10,0x17,0x1}, // ITU-R601 -+ /* -+ [3:2] : out_sel -+ 00 : 656 -+ 01 : 601 -+ 10 : RGB -+ 11 : CIS -+ [1] : YC_SEL -+ [0] : CBCR_SEL -+ */ -+ -+ {0x0b,0x06,0x1}, // 6 -+ {0x20,0xa8,0x1}, //b0); // Highlight C Supp 040215 -+ {0x22,0x26,0x1}, //2f); 040225 -+ -+ {0x24,0x08,0x1}, //00); //1F); 040226 -+ {0x25,0x10,0x1}, //10); //34); -+ {0x26,0x40,0x1}, //56); -+ {0x27,0x80,0x1}, //8D); -+ {0x28,0x2c,0x1}, //E7); -+ {0x29,0xd6,0x1}, //7C); -+ {0x2A,0x0c,0x1}, //70); -+ {0x2B,0xFF,0x1}, //FF); -+ {0x2C,0x00,0x1}, //00); -+ {0x2D,0x5f,0x1}, //1B); -+ // -+ {0xB0,0x08,0x1}, //00); //1F); 040226 -+ {0xB1,0x10,0x1}, //10); //34);50 -+ {0xB2,0x40,0x1}, //36); -+ {0xB3,0x80,0x1}, //6D); -+ {0xB4,0x2c,0x1}, //b7); -+ {0xB5,0xd6,0x1}, //7C); -+ {0xB6,0x0c,0x1}, //70); -+ {0xB7,0xFF,0x1}, //FF); -+ {0xB8,0x00,0x1}, //00); -+ {0xB9,0x5f,0x1}, //1B); -+ -+ -+ {0xc2,0x01,0x1}, // shading On -+ {0xc3,0x80,0x1}, -+ {0xc4,0x02,0x1}, -+ {0xc5,0x00,0x1}, -+ {0xc6,0x01,0x1}, -+ {0xc7,0x00,0x1}, -+ {0xc8,0x05,0x1}, -+ {0xc9,0x00,0x1}, -+ {0xca,0x04,0x1}, -+ -+ // shading 5 -+ {0xd0,0xb5,0x1}, -+ {0xd1,0x9c,0x1}, -+ {0xd2,0x8d,0x1}, -+ {0xd3,0x84,0x1}, -+ {0xd4,0x84,0x1}, -+ {0xd5,0x91,0x1}, -+ {0xd6,0xa0,0x1}, -+ {0xd7,0xb5,0x1}, -+ -+ {0xd8,0xc0,0x1}, -+ {0xd9,0xa6,0x1}, -+ {0xda,0x93,0x1}, -+ {0xdb,0x85,0x1}, -+ {0xdc,0x85,0x1}, -+ {0xdd,0x90,0x1}, -+ {0xde,0xa0,0x1}, -+ {0xdf,0xb8,0x1}, -+ -+ // Page 2 -+ {0xec,0x02,0x02}, -+ -+ {0x2d,0x02,0x02}, -+ {0x20,0x13,0x02}, -+ {0x21,0x13,0x2}, -+ {0x22,0x13,0x2}, -+ {0x23,0x13,0x2}, -+ {0x2e,0x85,0x2}, -+ {0x2f,0x34,0x2}, -+ {0x30,0x00,0x2}, -+ {0x28,0x94,0x2}, -+ -+ -+ // page 3 -+ {0xec,0x03,0x03}, -+ {0x10,0x00,0x3}, -+ {0x20,0x00,0x3}, -+ {0x21,0x20,0x3}, -+ {0x22,0x00,0x3}, -+ {0x23,0x00,0x3}, -+ {0x40,0x20,0x3}, -+ {0x41,0x20,0x3}, -+ {0x42,0x20,0x3}, -+ {0x43,0x20,0x3}, -+ {0x60,0x00,0x3}, -+ {0x61,0x00,0x3}, -+ {0x62,0x00,0x3}, -+ {0x63,0x00,0x3}, -+ {0x64,0x04,0x3}, -+ {0x65,0x1C,0x3}, -+ {0x66,0x05,0x3}, -+ {0x67,0x1C,0x3}, -+ {0x68,0x00,0x3}, -+ {0x69,0x2D,0x3}, -+ {0x6a,0x00,0x3}, -+ {0x6b,0x72,0x3}, -+ {0x6c,0x00,0x3}, -+ {0x6d,0x00,0x3}, -+ {0x6e,0x16,0x3}, // 2.38 -+ {0x6f,0x16,0x3}, // 2.38 -+ {0x70,0x00,0x3}, -+ {0x71,0x00,0x3}, -+ {0x72,0x45,0x3}, -+ {0x73,0x00,0x3}, -+ {0x74,0x1C,0x3}, -+ {0x75,0x05,0x3}, -+ -+ {0x80,0x00,0x3}, //for 0.02 _ 44 -+ {0x81,0x00,0x3}, -+ {0x82,0x00,0x3}, -+ {0x83,0x00,0x3}, -+ {0x84,0x04,0x3}, -+ {0x85,0x1c,0x3}, -+ {0x86,0x05,0x3}, -+ {0x87,0x1c,0x3}, -+ {0x88,0x00,0x3}, -+ {0x89,0x2d,0x3}, -+ {0x8a,0x00,0x3}, -+ {0x8b,0xcc,0x3}, -+ {0x8c,0x00,0x3}, -+ {0x8d,0x00,0x3}, -+ {0x8e,0x08,0x3}, -+ {0x8f,0x08,0x3}, -+ {0x90,0x01,0x3}, -+ {0x91,0x00,0x3}, -+ {0x92,0x91,0x3}, -+ {0x93,0x00,0x3}, -+ {0x94,0x88,0x3}, -+ {0x95,0x02,0x3}, -+ -+ -+ -+ // page 4 -+ {0xec,0x04,0x04}, -+ {0x3f,0x09,0x04}, // VGA : old board :0x08 , new board ; 0X09 -+ {0x18,0x00,0x04}, // sxga -+ {0x1c,0x41,0x04}, -+ {0x20,0x41,0x04}, // vga center 040215 -+ {0x22,0xc1,0x04},// a1); -+ {0x23,0x02,0x04}, -+ {0x28,0x41,0x04}, -+ {0x2a,0xc1,0x04},// a1); -+ {0x2b,0x02,0x04}, -+ -+ {0x3c,0x0b,0x04}, //f); // vga -+ {0x58,0x11,0x04}, -+ {0x5c,0x14,0x04}, -+ {0x60,0x21,0x04}, -+ {0x61,0x00,0x04}, -+ {0x62,0xB1,0x04}, -+ {0x63,0x02,0x04}, -+ {0x64,0x01,0x04}, -+ {0x65,0x00,0x04}, -+ {0x66,0x01,0x04}, -+ {0x67,0x02,0x04}, -+ {0x68,0x21,0x04}, -+ {0x69,0x00,0x04}, -+ {0x6a,0xB1,0x04}, -+ {0x6b,0x02,0x04}, -+ {0x6c,0x01,0x04}, -+ {0x6d,0x00,0x04}, -+ {0x6e,0x01,0x04}, -+ {0x6f,0x02,0x04}, -+ {0x70,0x2D,0x04}, -+ {0x71,0x00,0x04}, -+ {0x72,0xd3,0x04}, // 14 -+ {0x73,0x05,0x04}, // 15 -+ {0x74,0x1C,0x04}, -+ {0x75,0x05,0x04}, -+ {0x76,0x1b,0x04}, // HendL -+ {0x77,0x0b,0x04}, // HendH -+ {0x78,0x01,0x04}, // 5.00 -+ {0x79,0x80,0x04}, // 5.2a -+ {0x7a,0x33,0x04}, -+ {0x7b,0x00,0x04}, -+ {0x7c,0x38,0x04}, // 5.0e -+ {0x7d,0x03,0x04}, -+ {0x7e,0x00,0x04}, -+ {0x7f,0x0A,0x04}, -+ -+ {0x80,0x2e,0x04}, -+ {0x81,0x00,0x04}, -+ {0x82,0xae,0x04}, -+ {0x83,0x02,0x04}, -+ {0x84,0x00,0x04}, -+ {0x85,0x00,0x04}, -+ {0x86,0x01,0x04}, -+ {0x87,0x02,0x04}, -+ {0x88,0x2e,0x04}, -+ {0x89,0x00,0x04}, -+ {0x8a,0xae,0x04}, -+ {0x8b,0x02,0x04}, -+ {0x8c,0x1c,0x04}, -+ {0x8d,0x00,0x04}, -+ {0x8e,0x04,0x04}, -+ {0x8f,0x02,0x04}, -+ {0x90,0x2d,0x04}, -+ {0x91,0x00,0x04}, -+ {0x92,0xa5,0x04}, -+ {0x93,0x00,0x04}, -+ {0x94,0x88,0x04}, -+ {0x95,0x02,0x04}, -+ {0x96,0xb3,0x04}, -+ {0x97,0x06,0x04}, -+ {0x98,0x01,0x04}, -+ {0x99,0x00,0x04}, -+ {0x9a,0x33,0x04}, -+ {0x9b,0x30,0x04}, -+ {0x9c,0x50,0x04}, -+ {0x9d,0x30,0x04}, -+ {0x9e,0x01,0x04}, -+ {0x9f,0x08,0x04}, -+ -+ // page 5 -+ {0xec,0x05,0x05}, -+ {0x5a,0x22,0x05}, -+ -+ // page 6 -+ {0xec,0x06,0x06}, -+ {0x14,0x1e,0x06}, -+ {0x15,0xb4,0x04}, -+ {0x16,0x25,0x04}, -+ {0x17,0x74,0x04}, -+ -+ {0x10,0x48,0x04}, -+ {0x11,0xa0,0x04}, -+ {0x12,0x40,0x04}, // 040216 AE1 window ÁÙÀÓ -+ {0x13,0x70,0x04}, -+ -+ {0x1a,0x29,0x04}, // 040217 AWB window ÁÙÀÓ -+ {0x30,0x40,0x04}, -+ {0x31,0xa2,0x04}, -+ {0x32,0x50,0x04}, -+ {0x33,0xbc,0x04}, -+ {0x34,0x10,0x04}, -+ {0x35,0xd2,0x04}, -+ {0x36,0x18,0x04}, -+ {0x37,0xf5,0x04}, -+ {0x38,0x10,0x04}, -+ {0x39,0xd3,0x04}, -+ {0x3a,0x1a,0x04}, -+ {0x3b,0xf0,0x04}, -+ -+ // page 7 -+ {0xec,0x07,0x07}, -+ {0x08,0xff,0x7}, -+ {0x38,0x01,0x7}, //07); 040315 -+ {0x39,0x01,0x7}, //02); //4); 040223 040315 -+ {0x11,0xfe,0x7}, //fe); // green -2 040303 -+ {0x2a,0x20,0x7}, -+ {0x2b,0x20,0x7}, -+ {0x2c,0x10,0x7}, -+ {0x2d,0x00,0x7}, -+ {0x2e,0xf0,0x7}, -+ {0x2f,0xd0,0x7}, -+ {0x3a,0xf0,0x7}, -+ {0x23,0x07,0x7}, // for ESD -+ -+ // page 0 -+ {0xec,0x00,0x00}, -+ {0x8a,0x04,0x00}, -+ -+ // page 1 -+ {0xec,0x01,0x01}, -+ {0xe5,0xb0,0x01}, -+ {0xe5,0xb0,0x01}, -+ {0xc2,0x01,0x01}, -+ -+ {0x61,0x7b,0x01}, -+ {0x62,0x7b,0x01}, -+ {0x63,0x1b,0x01}, -+ {0x64,0x1b,0x01}, -+ -+ // page 0 -+ {0xec,0x00,0x00}, -+ {0x7e,0x04,0x00}, -+ -+ // page 4 -+ {0xec,0x04,0x04}, -+ {0x04,0x02,0x04}, -+ {0x06,0x02,0x04}, -+ -+ // page 1 -+ {0xec,0x01,0x01}, -+ {0x10,0x05,0x01}, -+ {0x54,0x02,0x01}, -+ {0x56,0x02,0x01}, -+ -+ // page 3 -+ {0xec,0x03,0x03}, -+ {0x0e,0x08,0x03}, -+ {0x0f,0x08,0x03}, -+ -+ // page 4 -+ {0xec,0x04,0x04}, -+ {0x00,0x30,0x04}, -+ {0x0a,0x30,0x04}, -+ -+ // page 5 -+ {0xec,0x05,0x05}, -+ {0x08,0x33,0x05}, -+ -+ // page 0 -+ {0xec,0x00,0x00}, -+ {0x02,0x00,0x00}, -+ -+ // page 4 -+//scale out -+ {0xec,0x04,0x04}, -+ {0x02,0x20,0x04}, -+ {0x1c,0x4f,0x04}, -+ -+ // page 1 -+ {0xec,0x01,0x01}, -+ {0x52,0x20,0x01}, -+ -+ // page 5 -+ {0xec,0x05,0x05}, -+ {0x0e,0x4f,0x05}, -+ -+//ae speed -+ // page 0 -+ {0xec,0x00,0x00}, -+ {0x92,0x80,0x00}, -+ {0x93,0x02,0x00}, -+ {0x94,0x04,0x00}, -+ {0x95,0x04,0x00}, -+ {0x96,0x04,0x00}, -+ {0x97,0x04,0x00}, -+ {0x9b,0x47,0x00}, -+ -+ {0xec,0x00,0x00}, -+ {0x40,0x17,0x00}, -+ {0x41,0x4c,0x00}, -+ {0x42,0x1d,0x00}, -+ {0x43,0x3e,0x00}, -+ {0x44,0x2a,0x00}, -+ {0x45,0x2d,0x00}, -+ -+ {0xec,0x01,0x01}, -+ {0x20,0xd0,0x01}, //high light color reference -+ -+ {0xec,0x00,0x00}, -+ {0x7e,0x00,0x00}, -+ {0x73,0x11,0x00}, // 41 -+ {0x78,0x78,0x00}, -+ -+ {0xec,0x07,0x07}, -+ {0x1b,0x3e,0x07}, -+ -+ {0xec,0x00,0x00}, -+ {0x48,0xA0,0x00}, //s48C0 -+ {0x49,0xB0,0x00}, //s49B0 -+ {0x4a,0x30,0x00}, //s4a20 -+ {0x4b,0x70,0x00}, //s4b70 -+ {0x4c,0xD0,0x00}, //s4cA0 -+ {0x4d,0xB0,0x00}, //s4dB0 -+ {0x4e,0x30,0x00}, //s4e30 -+ {0x4f,0xF0,0x00}, //s4fF0 -+ {0x50,0xA0,0x00}, //s50D0 -+ {0x51,0xB0,0x00}, //s51B0 -+ {0x52,0x25,0x00}, //s5210 -+ {0x53,0x70,0x00}, //s5370 -+ {0x54,0xD0,0x00}, //s5490 -+ {0x55,0xD0,0x00}, //s55B0 -+ {0x56,0x3A,0x00}, //s5640 -+ {0x57,0xD0,0x00}, //s57D0 -+ {0x58,0xA0,0x00}, //s58D0 -+ {0x59,0xA0,0x00}, //s59B0 -+ {0x5a,0x32,0x00}, //s5a0A -+ {0x5b,0x7A,0x00}, //s5b7A -+ {0x5c,0xB0,0x00}, //s5c90 -+ {0x5d,0xC0,0x00}, //s5dC0 -+ {0x5e,0x3E,0x00}, //s5e4A -+ {0x5f,0xfa,0x00}, //s5fD0 -+ -+ // gamma -+ {0xec,0x01,0x01}, -+ {0x24,0x31,0x01}, -+ {0x25,0x4C,0x01}, -+ {0x26,0x75,0x01}, -+ {0x27,0xB5,0x01}, -+ {0x28,0x17,0x01}, -+ {0x29,0xAE,0x01}, -+ {0x2A,0x97,0x01}, -+ {0x2B,0xFF,0x01}, -+ {0x2C,0x00,0x01}, -+ {0x2D,0x5B,0x01}, -+ -+ {0xB0,0x31,0x01}, -+ {0xB1,0x4C,0x01}, -+ {0xB2,0x75,0x01}, -+ {0xB3,0xB5,0x01}, -+ {0xB4,0x17,0x01}, -+ {0xB5,0xAE,0x01}, -+ {0xB6,0x97,0x01}, -+ {0xB7,0xFF,0x01}, -+ {0xB8,0x00,0x01}, -+ {0xB9,0x5B,0x01}, -+ -+ {0xec,0x00,0x00}, -+ {0x77,0xb0,0x00}, -+ {0x39,0x06,0x00}, -+ {0x3a,0x08,0x00}, -+ -+}; -+ -+ -+#define S5X532_INIT_REGS (sizeof(s5x532_reg)/sizeof(s5x532_reg[0])) -+#define S5X532_RISC_REGS 0xEB -+#define S5X532_ISP_REGS 0xFB /* S5C7323X */ -+#define S5X532_CIS_REGS 0x2F /* S5K437LA03 */ -+ -+ -+#define PAGE_ADDRESS 0xEC -+ -+//#define S5X532_REGS (S5X532_RISC_REGS+S5X532_ISP_REGS+S5X532_CIS_REGS) -+#define S5X532_REGS (0x1000) -+ -+ -+ -+#endif -+ -+ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/userapp.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/userapp.h 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,44 @@ -+/* -+ Character Driver API Interface -+ -+ Copyright (C) 2003 Samsung Electronics (SW.LEE: hitchcar@samsung.com) -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+*/ -+ -+#ifndef __FIMC20_CAMIF_USR_APP_H_ -+#define __FIMC20_CAMIF_USR_APP_H_ -+ -+ -+/* -+ * IOCTL Command for Character Driver -+ */ -+ -+#define CMD_CAMERA_INIT 0x23 -+/* Test Application Usage */ -+typedef struct { -+ int src_x; -+ int src_y; -+ int dst_x; -+ int dst_y; -+ int bpp; -+ int flip; -+} camif_param_t; -+ -+ -+ -+#endif -+ -+ -+/* -+ * Local variables: -+ * tab-width: 8 -+ * c-indent-level: 8 -+ * c-basic-offset: 8 -+ * c-set-style: "K&R" -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/v4l2_api.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/v4l2_api.c 2008-12-11 22:46:48.000000000 +0100 -@@ -0,0 +1,311 @@ -+/* -+ * . 2004-01-03: SW.LEE -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "camif.h" -+#include "videodev.h" -+ -+/* -+ Codec_formats/Preview_format[0] must be same to initial value of -+ preview_init_param/codec_init_param -+*/ -+ -+const struct v4l2_fmtdesc codec_formats[] = { -+ { -+ .index = 0, -+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, -+// .flags = FORMAT_FLAGS_PLANAR, -+ .description = "4:2:2, planar, Y-Cb-Cr", -+ .pixelformat = V4L2_PIX_FMT_YUV422P, -+ -+ },{ -+ .index = 1, -+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, -+// .flags = FORMAT_FLAGS_PLANAR, -+ .name = "4:2:0, planar, Y-Cb-Cr", -+ .fourcc = V4L2_PIX_FMT_YUV420, -+ } -+}; -+ -+ -+/* Todo -+ FIMC V4L2_PIX_FMT_RGB565 is not same to that of V4L2spec -+ and so we need image convert to FIMC V4l2_PIX_FMT_RGB565. -+*/ -+const struct v4l2_fmtdesc preview_formats[] = { -+ { -+ .index = 1, -+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, -+ .description = "16 bpp RGB, le", -+ .fourcc = V4L2_PIX_FMT_RGB565, -+// .flags = FORMAT_FLAGS_PACKED, -+ }, -+ { -+ .index = 0, -+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, -+// .flags = FORMAT_FLAGS_PACKED, -+ .description = "32 bpp RGB, le", -+ .fourcc = V4L2_PIX_FMT_BGR32, -+ } -+} -+ -+#define NUM_F ARRARY_SIZE(preview_formats) -+ -+ -+/* -+ * This function and v4l2 structure made for V4L2 API functions -+ * App <--> v4l2 <--> logical param <--> hardware -+ */ -+static int camif_get_v4l2(camif_cfg_t *cfg) -+{ -+ return 0; -+} -+ -+ -+/* -+** Gives the depth of a video4linux2 fourcc aka pixel format in bits. -+*/ -+static int pixfmt2depth(int pixfmt,int *fmtptr) -+{ -+ int fmt, depth; -+ -+ switch (pixfmt) { -+ case V4L2_PIX_FMT_RGB565: -+ case V4L2_PIX_FMT_RGB565X: -+ fmt = CAMIF_RGB_16; -+ depth = 16; -+ break; -+ case V4L2_PIX_FMT_BGR24: /* Not tested */ -+ case V4L2_PIX_FMT_RGB24: -+ fmt = CAMIF_RGB_24; -+ depth = 24; -+ break; -+ case V4L2_PIX_FMT_BGR32: -+ case V4L2_PIX_FMT_RGB32: -+ fmt = CAMIF_RGB_24; -+ depth 32; -+ break; -+ case V4L2_PIX_FMT_GREY: /* Not tested */ -+ fmt = CAMIF_OUT_YCBCR420; -+ depth = 8; -+ break; -+ case V4L2_PIX_FMT_YUYV: -+ case V4L2_PIX_FMT_UYVY: -+ case V4L2_PIX_FMT_YUV422P: -+ fmt = CAMIF_OUT_YCBCR422; -+ depth = 16; -+ break; -+ case V4L2_PIX_FMT_YUV420: -+ fmt = CAMIF_OUT_YCBCR420; -+ depth = 12; -+ break; -+ } -+ if (fmtptr) *fmtptr = fmt; -+ return depth; -+} -+ -+ -+ -+static int camif_s_v4l2(camif_cfg_t *cfg) -+{ -+ int num = cfg->v2.used_fmt; -+ -+ if ( !(cfg->v2.status&CAMIF_V4L2_INIT)) { -+ int depth; -+ int fourcc = v2.fmtdesc[num].pixelformat; -+ -+ /* To define v4l2_fmtsdesc */ -+ if (cfg->dma_type == CAMIF_CODEC) -+ cfg->v2->fmtdesc = codec_formats; -+ else -+ cfg->v2->fmtdesc = preview_formats; -+ -+ /* To define v4l2_format used currently */ -+ cfg->v2.fmt.width = cfg->target_x; -+ cfg->v2.fmt.height = cfg->target_y; -+ cfg->v2.fmt.field = V4L2_FIELD_NONE; -+ cfg->v2.fmt.pixelformat = fourcc; -+ depth = pixfmt2depth(fourcc,NULL); -+ cfg->v2.fmt.bytesperline= cfg->v2.fmt.width*depth >> 3; -+ cfg->v2.fmt.sizeimage = -+ cfg->v2.fmt.height * cfg->v2.fmt.bytesperline; -+ -+ /* To define v4l2_input */ -+ cfg->v2.input.index = 0; -+ if (cfg->dma_type == CAMIF_CODEC) -+ snprintf(cfg->v2.input.name, 31, "CAMIF CODEC"); -+ else -+ snprintf(cfg->v2.input.name, 31, "CAMIF PREVIEW"); -+ cfg->v2.input.type = V4L2_INPUT_TYPE_CAMERA; -+ -+ /* Write the Status of v4l2 machine */ -+ cfg->v2.status |= CAMIF_V4L2_INIT; -+ } -+ return 0; -+} -+ -+ -+static int camif_g_fmt(camif_cfg_t *cfg, struct v4l2_format *f) -+{ -+ int size = sizeof(struct v4l2_pix_format); -+ -+ switch (f->type) { -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ memset(&f->fmt.pix,0,size); -+ memcpy(&f->fmt.pix,&cfg->v2.fmt,size); -+ return 0; -+ default: -+ return -EINVAL; -+ } -+} -+ -+ -+/* Copy v4l2 parameter into other element of camif_cfg_t */ -+static int camif_s_try(camif_cfg_t *cfg, int f) -+{ -+ int fmt; -+ cfg->target_x = cfg->v2.fmt.width; -+ cfg->target_y = cfg->v2.fmt.height; -+ pixfmt2depth(cfg->v2.fmt.pixelformat,&fmt); -+ cfg->fmt = fmt; -+ camif_dynamic_conf(cfg); -+} -+ -+ -+static int camif_s_fmt(camif_cfg_t *cfg, struct v4l2_format *f) -+{ -+ int retval; -+ -+ switch (f->type) { -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ { -+ /* update our state informations */ -+// down(&fh->cap.lock); -+ cfg->v2.fmt = f->pix; -+ cfg->v2.status |= CAMIF_v4L2_DIRTY; -+ camif_dynamic_conf(cfg); -+ cfg->v2.status &= ~CAMIF_v4L2_DIRTY; /* dummy ? */ -+// up(&fh->cap.lock); -+ -+ return 0; -+ } -+ default: -+ return -EINVAL; -+ } -+ -+} -+ -+/* Refer ioctl of videodeX.c and bttv-driver.c */ -+int camif_do_ioctl -+(struct inode *inode, struct file *file,unsigned int cmd, void * arg) -+{ -+ camif_cfg_t *cfg = file->private_data; -+ int ret = 0; -+ -+ switch (cmd) { -+ case VIDIOC_QUERYCAP: -+ { -+ struct v4l2_capability *cap = arg; -+ -+ strcpy(cap->driver,"Fimc Camera"); -+ strlcpy(cap->card,cfg->v->name,sizeof(cap->card)); -+ sprintf(cap->bus_info,"FIMC 2.0 AHB Bus"); -+ cap->version = 0; -+ cap->capabilities = -+ V4L2_CAP_VIDEO_CAPTURE |V4L2_CAP_READWRITE; -+ return 0; -+ } -+ case VIDIOC_G_FMT: -+ { -+ struct v4l2_format *f = arg; -+ return camif_g_fmt(cfg,f); -+ } -+ case VIDIOC_S_FMT: -+ { -+ struct v4l2_format *f = arg; -+ return camif_s_fmt(cfg,f); -+ } -+ -+ case VIDIOC_ENUM_FMT: -+ { -+ struct v4l2_fmtdesc *f = arg; -+ enum v4l2_buf_type type = f->type; -+ int index = f->index; -+ -+ if (index >= NUM_F) -+ return -EINVAL; -+ switch (f->type) { -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ break; -+ case V4L2_BUF_TYPE_VIDEO_OVERLAY: -+ case V4L2_BUF_TYPE_VBI_CAPTURE: -+ default: -+ return -EINVAL; -+ } -+ memset(f,0,sizeof(*f)); -+ memcpy(f,cfg->v2.fmtdesc+index,sizeof(*f)); -+ return 0; -+ } -+ case VIDIOC_G_INPUT: -+ { -+ u32 *i = arg; -+ *i = cfg->v2.input; -+ return 0; -+ } -+ case VIDIOC_S_INPUT: -+ { -+ int index = *((int *)arg); -+ if (index != 0) -+ return -EINVAL; -+ cfg->v2.input.index = index; -+ return 0; -+ } -+ -+ default: -+ return -ENOIOCTLCMD; /* errno.h */ -+ } /* End of Switch */ -+ -+ -+} -+ -+ -+ -+ -+ -+ -+ -+/* -+ * Local variables: -+ * tab-width: 8 -+ * c-indent-level: 8 -+ * c-basic-offset: 8 -+ * c-set-style: "K&R" -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/videodev2.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/videodev2.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,938 @@ -+#ifndef __LINUX_VIDEODEV2_H -+#define __LINUX_VIDEODEV2_H -+/* -+ * Video for Linux Two -+ * -+ * Header file for v4l or V4L2 drivers and applications, for -+ * Linux kernels 2.2.x or 2.4.x. -+ * -+ * See http://bytesex.org/v4l/ for API specs and other -+ * v4l2 documentation. -+ * -+ * Author: Bill Dirks -+ * Justin Schoeman -+ * et al. -+ */ -+#ifdef __KERNEL__ -+#include /* need struct timeval */ -+#endif -+ -+/* -+ * M I S C E L L A N E O U S -+ */ -+ -+/* Four-character-code (FOURCC) */ -+#define v4l2_fourcc(a,b,c,d)\ -+ (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24)) -+ -+/* -+ * E N U M S -+ */ -+enum v4l2_field { -+ V4L2_FIELD_ANY = 0, /* driver can choose from none, -+ top, bottom, interlaced -+ depending on whatever it thinks -+ is approximate ... */ -+ V4L2_FIELD_NONE = 1, /* this device has no fields ... */ -+ V4L2_FIELD_TOP = 2, /* top field only */ -+ V4L2_FIELD_BOTTOM = 3, /* bottom field only */ -+ V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */ -+ V4L2_FIELD_SEQ_TB = 5, /* both fields sequential into one -+ buffer, top-bottom order */ -+ V4L2_FIELD_SEQ_BT = 6, /* same as above + bottom-top order */ -+ V4L2_FIELD_ALTERNATE = 7, /* both fields alternating into -+ separate buffers */ -+}; -+#define V4L2_FIELD_HAS_TOP(field) \ -+ ((field) == V4L2_FIELD_TOP ||\ -+ (field) == V4L2_FIELD_INTERLACED ||\ -+ (field) == V4L2_FIELD_SEQ_TB ||\ -+ (field) == V4L2_FIELD_SEQ_BT) -+#define V4L2_FIELD_HAS_BOTTOM(field) \ -+ ((field) == V4L2_FIELD_BOTTOM ||\ -+ (field) == V4L2_FIELD_INTERLACED ||\ -+ (field) == V4L2_FIELD_SEQ_TB ||\ -+ (field) == V4L2_FIELD_SEQ_BT) -+#define V4L2_FIELD_HAS_BOTH(field) \ -+ ((field) == V4L2_FIELD_INTERLACED ||\ -+ (field) == V4L2_FIELD_SEQ_TB ||\ -+ (field) == V4L2_FIELD_SEQ_BT) -+ -+enum v4l2_buf_type { -+ V4L2_BUF_TYPE_VIDEO_CAPTURE = 1, -+ V4L2_BUF_TYPE_VIDEO_OUTPUT = 2, -+ V4L2_BUF_TYPE_VIDEO_OVERLAY = 3, -+ V4L2_BUF_TYPE_VBI_CAPTURE = 4, -+ V4L2_BUF_TYPE_VBI_OUTPUT = 5, -+ V4L2_BUF_TYPE_PRIVATE = 0x80, -+}; -+ -+enum v4l2_ctrl_type { -+ V4L2_CTRL_TYPE_INTEGER = 1, -+ V4L2_CTRL_TYPE_BOOLEAN = 2, -+ V4L2_CTRL_TYPE_MENU = 3, -+ V4L2_CTRL_TYPE_BUTTON = 4, -+}; -+ -+enum v4l2_tuner_type { -+ V4L2_TUNER_RADIO = 1, -+ V4L2_TUNER_ANALOG_TV = 2, -+}; -+ -+enum v4l2_memory { -+ V4L2_MEMORY_MMAP = 1, -+ V4L2_MEMORY_USERPTR = 2, -+ V4L2_MEMORY_OVERLAY = 3, -+}; -+ -+/* see also http://vektor.theorem.ca/graphics/ycbcr/ */ -+enum v4l2_colorspace { -+ /* ITU-R 601 -- broadcast NTSC/PAL */ -+ V4L2_COLORSPACE_SMPTE170M = 1, -+ -+ /* 1125-Line (US) HDTV */ -+ V4L2_COLORSPACE_SMPTE240M = 2, -+ -+ /* HD and modern captures. */ -+ V4L2_COLORSPACE_REC709 = 3, -+ -+ /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */ -+ V4L2_COLORSPACE_BT878 = 4, -+ -+ /* These should be useful. Assume 601 extents. */ -+ V4L2_COLORSPACE_470_SYSTEM_M = 5, -+ V4L2_COLORSPACE_470_SYSTEM_BG = 6, -+ -+ /* I know there will be cameras that send this. So, this is -+ * unspecified chromaticities and full 0-255 on each of the -+ * Y'CbCr components -+ */ -+ V4L2_COLORSPACE_JPEG = 7, -+ -+ /* For RGB colourspaces, this is probably a good start. */ -+ V4L2_COLORSPACE_SRGB = 8, -+}; -+ -+enum v4l2_priority { -+ V4L2_PRIORITY_UNSET = 0, /* not initialized */ -+ V4L2_PRIORITY_BACKGROUND = 1, -+ V4L2_PRIORITY_INTERACTIVE = 2, -+ V4L2_PRIORITY_RECORD = 3, -+ V4L2_PRIORITY_DEFAULT = V4L2_PRIORITY_INTERACTIVE, -+}; -+ -+struct v4l2_rect { -+ __s32 left; -+ __s32 top; -+ __s32 width; -+ __s32 height; -+}; -+ -+struct v4l2_fract { -+ __u32 numerator; -+ __u32 denominator; -+}; -+ -+/* -+ * D R I V E R C A P A B I L I T I E S -+ */ -+struct v4l2_capability -+{ -+ __u8 driver[16]; /* i.e. "bttv" */ -+ __u8 card[32]; /* i.e. "Hauppauge WinTV" */ -+ __u8 bus_info[32]; /* "PCI:" + pci_name(pci_dev) */ -+ __u32 version; /* should use KERNEL_VERSION() */ -+ __u32 capabilities; /* Device capabilities */ -+ __u32 reserved[4]; -+}; -+ -+/* Values for 'capabilities' field */ -+#define V4L2_CAP_VIDEO_CAPTURE 0x00000001 /* Is a video capture device */ -+#define V4L2_CAP_VIDEO_OUTPUT 0x00000002 /* Is a video output device */ -+#define V4L2_CAP_VIDEO_OVERLAY 0x00000004 /* Can do video overlay */ -+#define V4L2_CAP_VBI_CAPTURE 0x00000010 /* Is a VBI capture device */ -+#define V4L2_CAP_VBI_OUTPUT 0x00000020 /* Is a VBI output device */ -+#define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */ -+ -+#define V4L2_CAP_TUNER 0x00010000 /* has a tuner */ -+#define V4L2_CAP_AUDIO 0x00020000 /* has audio support */ -+#define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ -+ -+#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ -+#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ -+#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ -+ -+/* -+ * V I D E O I M A G E F O R M A T -+ */ -+ -+struct v4l2_pix_format -+{ -+ __u32 width; -+ __u32 height; -+ __u32 pixelformat; -+ enum v4l2_field field; -+ __u32 bytesperline; /* for padding, zero if unused */ -+ __u32 sizeimage; -+ enum v4l2_colorspace colorspace; -+ __u32 priv; /* private data, depends on pixelformat */ -+}; -+ -+/* Pixel format FOURCC depth Description */ -+#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R','G','B','1') /* 8 RGB-3-3-2 */ -+#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R','G','B','O') /* 16 RGB-5-5-5 */ -+#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R','G','B','P') /* 16 RGB-5-6-5 */ -+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R','G','B','Q') /* 16 RGB-5-5-5 BE */ -+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R','G','B','R') /* 16 RGB-5-6-5 BE */ -+#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B','G','R','3') /* 24 BGR-8-8-8 */ -+#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R','G','B','3') /* 24 RGB-8-8-8 */ -+#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B','G','R','4') /* 32 BGR-8-8-8-8 */ -+#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R','G','B','4') /* 32 RGB-8-8-8-8 */ -+#define V4L2_PIX_FMT_GREY v4l2_fourcc('G','R','E','Y') /* 8 Greyscale */ -+#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y','V','U','9') /* 9 YVU 4:1:0 */ -+#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y','V','1','2') /* 12 YVU 4:2:0 */ -+#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y','U','Y','V') /* 16 YUV 4:2:2 */ -+#define V4L2_PIX_FMT_UYVY v4l2_fourcc('U','Y','V','Y') /* 16 YUV 4:2:2 */ -+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4','2','2','P') /* 16 YVU422 planar */ -+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4','1','1','P') /* 16 YVU411 planar */ -+#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y','4','1','P') /* 12 YUV 4:1:1 */ -+ -+/* two planes -- one Y, one Cr + Cb interleaved */ -+#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N','V','1','2') /* 12 Y/CbCr 4:2:0 */ -+#define V4L2_PIX_FMT_NV21 v4l2_fourcc('N','V','2','1') /* 12 Y/CrCb 4:2:0 */ -+ -+/* The following formats are not defined in the V4L2 specification */ -+#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y','U','V','9') /* 9 YUV 4:1:0 */ -+#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y','U','1','2') /* 12 YUV 4:2:0 */ -+#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y','Y','U','V') /* 16 YUV 4:2:2 */ -+#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H','I','2','4') /* 8 8-bit color */ -+ -+/* compressed formats */ -+#define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M','J','P','G') /* Motion-JPEG */ -+#define V4L2_PIX_FMT_JPEG v4l2_fourcc('J','P','E','G') /* JFIF JPEG */ -+#define V4L2_PIX_FMT_DV v4l2_fourcc('d','v','s','d') /* 1394 */ -+#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M','P','E','G') /* MPEG */ -+ -+/* Vendor-specific formats */ -+#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W','N','V','A') /* Winnov hw compress */ -+ -+/* -+ * F O R M A T E N U M E R A T I O N -+ */ -+struct v4l2_fmtdesc -+{ -+ __u32 index; /* Format number */ -+ enum v4l2_buf_type type; /* buffer type */ -+ __u32 flags; -+ __u8 description[32]; /* Description string */ -+ __u32 pixelformat; /* Format fourcc */ -+ __u32 reserved[4]; -+}; -+ -+#define V4L2_FMT_FLAG_COMPRESSED 0x0001 -+ -+ -+/* -+ * T I M E C O D E -+ */ -+struct v4l2_timecode -+{ -+ __u32 type; -+ __u32 flags; -+ __u8 frames; -+ __u8 seconds; -+ __u8 minutes; -+ __u8 hours; -+ __u8 userbits[4]; -+}; -+ -+/* Type */ -+#define V4L2_TC_TYPE_24FPS 1 -+#define V4L2_TC_TYPE_25FPS 2 -+#define V4L2_TC_TYPE_30FPS 3 -+#define V4L2_TC_TYPE_50FPS 4 -+#define V4L2_TC_TYPE_60FPS 5 -+ -+/* Flags */ -+#define V4L2_TC_FLAG_DROPFRAME 0x0001 /* "drop-frame" mode */ -+#define V4L2_TC_FLAG_COLORFRAME 0x0002 -+#define V4L2_TC_USERBITS_field 0x000C -+#define V4L2_TC_USERBITS_USERDEFINED 0x0000 -+#define V4L2_TC_USERBITS_8BITCHARS 0x0008 -+/* The above is based on SMPTE timecodes */ -+ -+ -+/* -+ * C O M P R E S S I O N P A R A M E T E R S -+ */ -+#if 0 -+/* ### generic compression settings don't work, there is too much -+ * ### codec-specific stuff. Maybe reuse that for MPEG codec settings -+ * ### later ... */ -+struct v4l2_compression -+{ -+ __u32 quality; -+ __u32 keyframerate; -+ __u32 pframerate; -+ __u32 reserved[5]; -+ -+/* what we'll need for MPEG, extracted from some postings on -+ the v4l list (Gert Vervoort, PlasmaJohn). -+ -+system stream: -+ - type: elementary stream(ES), packatised elementary stream(s) (PES) -+ program stream(PS), transport stream(TS) -+ - system bitrate -+ - PS packet size (DVD: 2048 bytes, VCD: 2324 bytes) -+ - TS video PID -+ - TS audio PID -+ - TS PCR PID -+ - TS system information tables (PAT, PMT, CAT, NIT and SIT) -+ - (MPEG-1 systems stream vs. MPEG-2 program stream (TS not supported -+ by MPEG-1 systems) -+ -+audio: -+ - type: MPEG (+Layer I,II,III), AC-3, LPCM -+ - bitrate -+ - sampling frequency (DVD: 48 Khz, VCD: 44.1 KHz, 32 kHz) -+ - Trick Modes? (ff, rew) -+ - Copyright -+ - Inverse Telecine -+ -+video: -+ - picturesize (SIF, 1/2 D1, 2/3 D1, D1) and PAL/NTSC norm can be set -+ through excisting V4L2 controls -+ - noise reduction, parameters encoder specific? -+ - MPEG video version: MPEG-1, MPEG-2 -+ - GOP (Group Of Pictures) definition: -+ - N: number of frames per GOP -+ - M: distance between reference (I,P) frames -+ - open/closed GOP -+ - quantiser matrix: inter Q matrix (64 bytes) and intra Q matrix (64 bytes) -+ - quantiser scale: linear or logarithmic -+ - scanning: alternate or zigzag -+ - bitrate mode: CBR (constant bitrate) or VBR (variable bitrate). -+ - target video bitrate for CBR -+ - target video bitrate for VBR -+ - maximum video bitrate for VBR - min. quantiser value for VBR -+ - max. quantiser value for VBR -+ - adaptive quantisation value -+ - return the number of bytes per GOP or bitrate for bitrate monitoring -+ -+*/ -+}; -+#endif -+ -+struct v4l2_jpegcompression -+{ -+ int quality; -+ -+ int APPn; /* Number of APP segment to be written, -+ * must be 0..15 */ -+ int APP_len; /* Length of data in JPEG APPn segment */ -+ char APP_data[60]; /* Data in the JPEG APPn segment. */ -+ -+ int COM_len; /* Length of data in JPEG COM segment */ -+ char COM_data[60]; /* Data in JPEG COM segment */ -+ -+ __u32 jpeg_markers; /* Which markers should go into the JPEG -+ * output. Unless you exactly know what -+ * you do, leave them untouched. -+ * Inluding less markers will make the -+ * resulting code smaller, but there will -+ * be fewer aplications which can read it. -+ * The presence of the APP and COM marker -+ * is influenced by APP_len and COM_len -+ * ONLY, not by this property! */ -+ -+#define V4L2_JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */ -+#define V4L2_JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */ -+#define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ -+#define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */ -+#define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will -+ * allways use APP0 */ -+}; -+ -+ -+/* -+ * M E M O R Y - M A P P I N G B U F F E R S -+ */ -+struct v4l2_requestbuffers -+{ -+ __u32 count; -+ enum v4l2_buf_type type; -+ enum v4l2_memory memory; -+ __u32 reserved[2]; -+}; -+ -+struct v4l2_buffer -+{ -+ __u32 index; -+ enum v4l2_buf_type type; -+ __u32 bytesused; -+ __u32 flags; -+ enum v4l2_field field; -+ struct timeval timestamp; -+ struct v4l2_timecode timecode; -+ __u32 sequence; -+ -+ /* memory location */ -+ enum v4l2_memory memory; -+ union { -+ __u32 offset; -+ unsigned long userptr; -+ } m; -+ __u32 length; -+ -+ __u32 reserved[2]; -+}; -+ -+/* Flags for 'flags' field */ -+#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */ -+#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */ -+#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */ -+#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ -+#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ -+#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ -+#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ -+ -+/* -+ * O V E R L A Y P R E V I E W -+ */ -+struct v4l2_framebuffer -+{ -+ __u32 capability; -+ __u32 flags; -+/* FIXME: in theory we should pass something like PCI device + memory -+ * region + offset instead of some physical address */ -+ void* base; -+ struct v4l2_pix_format fmt; -+}; -+/* Flags for the 'capability' field. Read only */ -+#define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001 -+#define V4L2_FBUF_CAP_CHROMAKEY 0x0002 -+#define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004 -+#define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008 -+/* Flags for the 'flags' field. */ -+#define V4L2_FBUF_FLAG_PRIMARY 0x0001 -+#define V4L2_FBUF_FLAG_OVERLAY 0x0002 -+#define V4L2_FBUF_FLAG_CHROMAKEY 0x0004 -+ -+struct v4l2_clip -+{ -+ struct v4l2_rect c; -+ struct v4l2_clip *next; -+}; -+ -+struct v4l2_window -+{ -+ struct v4l2_rect w; -+ enum v4l2_field field; -+ __u32 chromakey; -+ struct v4l2_clip *clips; -+ __u32 clipcount; -+ void *bitmap; -+}; -+ -+ -+/* -+ * C A P T U R E P A R A M E T E R S -+ */ -+struct v4l2_captureparm -+{ -+ __u32 capability; /* Supported modes */ -+ __u32 capturemode; /* Current mode */ -+ struct v4l2_fract timeperframe; /* Time per frame in .1us units */ -+ __u32 extendedmode; /* Driver-specific extensions */ -+ __u32 readbuffers; /* # of buffers for read */ -+ __u32 reserved[4]; -+}; -+/* Flags for 'capability' and 'capturemode' fields */ -+#define V4L2_MODE_HIGHQUALITY 0x0001 /* High quality imaging mode */ -+#define V4L2_CAP_TIMEPERFRAME 0x1000 /* timeperframe field is supported */ -+ -+struct v4l2_outputparm -+{ -+ __u32 capability; /* Supported modes */ -+ __u32 outputmode; /* Current mode */ -+ struct v4l2_fract timeperframe; /* Time per frame in seconds */ -+ __u32 extendedmode; /* Driver-specific extensions */ -+ __u32 writebuffers; /* # of buffers for write */ -+ __u32 reserved[4]; -+}; -+ -+/* -+ * I N P U T I M A G E C R O P P I N G -+ */ -+ -+struct v4l2_cropcap { -+ enum v4l2_buf_type type; -+ struct v4l2_rect bounds; -+ struct v4l2_rect defrect; -+ struct v4l2_fract pixelaspect; -+}; -+ -+struct v4l2_crop { -+ enum v4l2_buf_type type; -+ struct v4l2_rect c; -+}; -+ -+/* -+ * A N A L O G V I D E O S T A N D A R D -+ */ -+ -+typedef __u64 v4l2_std_id; -+ -+/* one bit for each */ -+#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001) -+#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002) -+#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004) -+#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008) -+#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010) -+#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020) -+#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040) -+#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080) -+ -+#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100) -+#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200) -+#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400) -+#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800) -+ -+#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) -+#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) -+ -+#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000) -+#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000) -+#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000) -+#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000) -+#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000) -+#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000) -+#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000) -+ -+/* ATSC/HDTV */ -+#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) -+#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000) -+ -+/* some common needed stuff */ -+#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\ -+ V4L2_STD_PAL_B1 |\ -+ V4L2_STD_PAL_G) -+#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\ -+ V4L2_STD_PAL_D1 |\ -+ V4L2_STD_PAL_K) -+#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\ -+ V4L2_STD_PAL_DK |\ -+ V4L2_STD_PAL_H |\ -+ V4L2_STD_PAL_I) -+#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\ -+ V4L2_STD_NTSC_M_JP) -+#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\ -+ V4L2_STD_SECAM_D |\ -+ V4L2_STD_SECAM_G |\ -+ V4L2_STD_SECAM_H |\ -+ V4L2_STD_SECAM_K |\ -+ V4L2_STD_SECAM_K1 |\ -+ V4L2_STD_SECAM_L) -+ -+#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\ -+ V4L2_STD_PAL_60 |\ -+ V4L2_STD_NTSC) -+#define V4L2_STD_625_50 (V4L2_STD_PAL |\ -+ V4L2_STD_PAL_N |\ -+ V4L2_STD_PAL_Nc |\ -+ V4L2_STD_SECAM) -+ -+#define V4L2_STD_UNKNOWN 0 -+#define V4L2_STD_ALL (V4L2_STD_525_60 |\ -+ V4L2_STD_625_50) -+ -+struct v4l2_standard -+{ -+ __u32 index; -+ v4l2_std_id id; -+ __u8 name[24]; -+ struct v4l2_fract frameperiod; /* Frames, not fields */ -+ __u32 framelines; -+ __u32 reserved[4]; -+}; -+ -+ -+/* -+ * V I D E O I N P U T S -+ */ -+struct v4l2_input -+{ -+ __u32 index; /* Which input */ -+ __u8 name[32]; /* Label */ -+ __u32 type; /* Type of input */ -+ __u32 audioset; /* Associated audios (bitfield) */ -+ __u32 tuner; /* Associated tuner */ -+ v4l2_std_id std; -+ __u32 status; -+ __u32 reserved[4]; -+}; -+/* Values for the 'type' field */ -+#define V4L2_INPUT_TYPE_TUNER 1 -+#define V4L2_INPUT_TYPE_CAMERA 2 -+ -+/* field 'status' - general */ -+#define V4L2_IN_ST_NO_POWER 0x00000001 /* Attached device is off */ -+#define V4L2_IN_ST_NO_SIGNAL 0x00000002 -+#define V4L2_IN_ST_NO_COLOR 0x00000004 -+ -+/* field 'status' - analog */ -+#define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */ -+#define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */ -+ -+/* field 'status' - digital */ -+#define V4L2_IN_ST_NO_SYNC 0x00010000 /* No synchronization lock */ -+#define V4L2_IN_ST_NO_EQU 0x00020000 /* No equalizer lock */ -+#define V4L2_IN_ST_NO_CARRIER 0x00040000 /* Carrier recovery failed */ -+ -+/* field 'status' - VCR and set-top box */ -+#define V4L2_IN_ST_MACROVISION 0x01000000 /* Macrovision detected */ -+#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */ -+#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */ -+ -+/* -+ * V I D E O O U T P U T S -+ */ -+struct v4l2_output -+{ -+ __u32 index; /* Which output */ -+ __u8 name[32]; /* Label */ -+ __u32 type; /* Type of output */ -+ __u32 audioset; /* Associated audios (bitfield) */ -+ __u32 modulator; /* Associated modulator */ -+ v4l2_std_id std; -+ __u32 reserved[4]; -+}; -+/* Values for the 'type' field */ -+#define V4L2_OUTPUT_TYPE_MODULATOR 1 -+#define V4L2_OUTPUT_TYPE_ANALOG 2 -+#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3 -+ -+/* -+ * C O N T R O L S -+ */ -+struct v4l2_control -+{ -+ __u32 id; -+ __s32 value; -+}; -+ -+/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ -+struct v4l2_queryctrl -+{ -+ __u32 id; -+ enum v4l2_ctrl_type type; -+ __u8 name[32]; /* Whatever */ -+ __s32 minimum; /* Note signedness */ -+ __s32 maximum; -+ __s32 step; -+ __s32 default_value; -+ __u32 flags; -+ __u32 reserved[2]; -+}; -+ -+/* Used in the VIDIOC_QUERYMENU ioctl for querying menu items */ -+struct v4l2_querymenu -+{ -+ __u32 id; -+ __u32 index; -+ __u8 name[32]; /* Whatever */ -+ __u32 reserved; -+}; -+ -+/* Control flags */ -+#define V4L2_CTRL_FLAG_DISABLED 0x0001 -+#define V4L2_CTRL_FLAG_GRABBED 0x0002 -+ -+/* Control IDs defined by V4L2 */ -+#define V4L2_CID_BASE 0x00980900 -+/* IDs reserved for driver specific controls */ -+#define V4L2_CID_PRIVATE_BASE 0x08000000 -+ -+#define V4L2_CID_BRIGHTNESS (V4L2_CID_BASE+0) -+#define V4L2_CID_CONTRAST (V4L2_CID_BASE+1) -+#define V4L2_CID_SATURATION (V4L2_CID_BASE+2) -+#define V4L2_CID_HUE (V4L2_CID_BASE+3) -+#define V4L2_CID_AUDIO_VOLUME (V4L2_CID_BASE+5) -+#define V4L2_CID_AUDIO_BALANCE (V4L2_CID_BASE+6) -+#define V4L2_CID_AUDIO_BASS (V4L2_CID_BASE+7) -+#define V4L2_CID_AUDIO_TREBLE (V4L2_CID_BASE+8) -+#define V4L2_CID_AUDIO_MUTE (V4L2_CID_BASE+9) -+#define V4L2_CID_AUDIO_LOUDNESS (V4L2_CID_BASE+10) -+#define V4L2_CID_BLACK_LEVEL (V4L2_CID_BASE+11) -+#define V4L2_CID_AUTO_WHITE_BALANCE (V4L2_CID_BASE+12) -+#define V4L2_CID_DO_WHITE_BALANCE (V4L2_CID_BASE+13) -+#define V4L2_CID_RED_BALANCE (V4L2_CID_BASE+14) -+#define V4L2_CID_BLUE_BALANCE (V4L2_CID_BASE+15) -+#define V4L2_CID_GAMMA (V4L2_CID_BASE+16) -+#define V4L2_CID_WHITENESS (V4L2_CID_GAMMA) /* ? Not sure */ -+#define V4L2_CID_EXPOSURE (V4L2_CID_BASE+17) -+#define V4L2_CID_AUTOGAIN (V4L2_CID_BASE+18) -+#define V4L2_CID_GAIN (V4L2_CID_BASE+19) -+#define V4L2_CID_HFLIP (V4L2_CID_BASE+20) -+#define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -+#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) -+#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) -+#define V4L2_CID_LASTP1 (V4L2_CID_BASE+24) /* last CID + 1 */ -+ -+/* -+ * T U N I N G -+ */ -+struct v4l2_tuner -+{ -+ __u32 index; -+ __u8 name[32]; -+ enum v4l2_tuner_type type; -+ __u32 capability; -+ __u32 rangelow; -+ __u32 rangehigh; -+ __u32 rxsubchans; -+ __u32 audmode; -+ __s32 signal; -+ __s32 afc; -+ __u32 reserved[4]; -+}; -+ -+struct v4l2_modulator -+{ -+ __u32 index; -+ __u8 name[32]; -+ __u32 capability; -+ __u32 rangelow; -+ __u32 rangehigh; -+ __u32 txsubchans; -+ __u32 reserved[4]; -+}; -+ -+/* Flags for the 'capability' field */ -+#define V4L2_TUNER_CAP_LOW 0x0001 -+#define V4L2_TUNER_CAP_NORM 0x0002 -+#define V4L2_TUNER_CAP_STEREO 0x0010 -+#define V4L2_TUNER_CAP_LANG2 0x0020 -+#define V4L2_TUNER_CAP_SAP 0x0020 -+#define V4L2_TUNER_CAP_LANG1 0x0040 -+ -+/* Flags for the 'rxsubchans' field */ -+#define V4L2_TUNER_SUB_MONO 0x0001 -+#define V4L2_TUNER_SUB_STEREO 0x0002 -+#define V4L2_TUNER_SUB_LANG2 0x0004 -+#define V4L2_TUNER_SUB_SAP 0x0004 -+#define V4L2_TUNER_SUB_LANG1 0x0008 -+ -+/* Values for the 'audmode' field */ -+#define V4L2_TUNER_MODE_MONO 0x0000 -+#define V4L2_TUNER_MODE_STEREO 0x0001 -+#define V4L2_TUNER_MODE_LANG2 0x0002 -+#define V4L2_TUNER_MODE_SAP 0x0002 -+#define V4L2_TUNER_MODE_LANG1 0x0003 -+ -+struct v4l2_frequency -+{ -+ __u32 tuner; -+ enum v4l2_tuner_type type; -+ __u32 frequency; -+ __u32 reserved[8]; -+}; -+ -+/* -+ * A U D I O -+ */ -+struct v4l2_audio -+{ -+ __u32 index; -+ __u8 name[32]; -+ __u32 capability; -+ __u32 mode; -+ __u32 reserved[2]; -+}; -+/* Flags for the 'capability' field */ -+#define V4L2_AUDCAP_STEREO 0x00001 -+#define V4L2_AUDCAP_AVL 0x00002 -+ -+/* Flags for the 'mode' field */ -+#define V4L2_AUDMODE_AVL 0x00001 -+ -+struct v4l2_audioout -+{ -+ __u32 index; -+ __u8 name[32]; -+ __u32 capability; -+ __u32 mode; -+ __u32 reserved[2]; -+}; -+ -+/* -+ * D A T A S E R V I C E S ( V B I ) -+ * -+ * Data services API by Michael Schimek -+ */ -+ -+struct v4l2_vbi_format -+{ -+ __u32 sampling_rate; /* in 1 Hz */ -+ __u32 offset; -+ __u32 samples_per_line; -+ __u32 sample_format; /* V4L2_PIX_FMT_* */ -+ __s32 start[2]; -+ __u32 count[2]; -+ __u32 flags; /* V4L2_VBI_* */ -+ __u32 reserved[2]; /* must be zero */ -+}; -+ -+/* VBI flags */ -+#define V4L2_VBI_UNSYNC (1<< 0) -+#define V4L2_VBI_INTERLACED (1<< 1) -+ -+ -+/* -+ * A G G R E G A T E S T R U C T U R E S -+ */ -+ -+/* Stream data format -+ */ -+struct v4l2_format -+{ -+ enum v4l2_buf_type type; -+ union -+ { -+ struct v4l2_pix_format pix; // V4L2_BUF_TYPE_VIDEO_CAPTURE -+ struct v4l2_window win; // V4L2_BUF_TYPE_VIDEO_OVERLAY -+ struct v4l2_vbi_format vbi; // V4L2_BUF_TYPE_VBI_CAPTURE -+ __u8 raw_data[200]; // user-defined -+ } fmt; -+}; -+ -+ -+/* Stream type-dependent parameters -+ */ -+struct v4l2_streamparm -+{ -+ enum v4l2_buf_type type; -+ union -+ { -+ struct v4l2_captureparm capture; -+ struct v4l2_outputparm output; -+ __u8 raw_data[200]; /* user-defined */ -+ } parm; -+}; -+ -+ -+ -+/* -+ * I O C T L C O D E S F O R V I D E O D E V I C E S -+ * -+ */ -+#define VIDIOC_QUERYCAP _IOR ('V', 0, struct v4l2_capability) -+#define VIDIOC_RESERVED _IO ('V', 1) -+#define VIDIOC_ENUM_FMT _IOWR ('V', 2, struct v4l2_fmtdesc) -+#define VIDIOC_G_FMT _IOWR ('V', 4, struct v4l2_format) -+#define VIDIOC_S_FMT _IOWR ('V', 5, struct v4l2_format) -+#if 0 -+#define VIDIOC_G_COMP _IOR ('V', 6, struct v4l2_compression) -+#define VIDIOC_S_COMP _IOW ('V', 7, struct v4l2_compression) -+#endif -+#define VIDIOC_REQBUFS _IOWR ('V', 8, struct v4l2_requestbuffers) -+#define VIDIOC_QUERYBUF _IOWR ('V', 9, struct v4l2_buffer) -+#define VIDIOC_G_FBUF _IOR ('V', 10, struct v4l2_framebuffer) -+#define VIDIOC_S_FBUF _IOW ('V', 11, struct v4l2_framebuffer) -+#define VIDIOC_OVERLAY _IOW ('V', 14, int) -+#define VIDIOC_QBUF _IOWR ('V', 15, struct v4l2_buffer) -+#define VIDIOC_DQBUF _IOWR ('V', 17, struct v4l2_buffer) -+#define VIDIOC_STREAMON _IOW ('V', 18, int) -+#define VIDIOC_STREAMOFF _IOW ('V', 19, int) -+#define VIDIOC_G_PARM _IOWR ('V', 21, struct v4l2_streamparm) -+#define VIDIOC_S_PARM _IOWR ('V', 22, struct v4l2_streamparm) -+#define VIDIOC_G_STD _IOR ('V', 23, v4l2_std_id) -+#define VIDIOC_S_STD _IOW ('V', 24, v4l2_std_id) -+#define VIDIOC_ENUMSTD _IOWR ('V', 25, struct v4l2_standard) -+#define VIDIOC_ENUMINPUT _IOWR ('V', 26, struct v4l2_input) -+#define VIDIOC_G_CTRL _IOWR ('V', 27, struct v4l2_control) -+#define VIDIOC_S_CTRL _IOWR ('V', 28, struct v4l2_control) -+#define VIDIOC_G_TUNER _IOWR ('V', 29, struct v4l2_tuner) -+#define VIDIOC_S_TUNER _IOW ('V', 30, struct v4l2_tuner) -+#define VIDIOC_G_AUDIO _IOR ('V', 33, struct v4l2_audio) -+#define VIDIOC_S_AUDIO _IOW ('V', 34, struct v4l2_audio) -+#define VIDIOC_QUERYCTRL _IOWR ('V', 36, struct v4l2_queryctrl) -+#define VIDIOC_QUERYMENU _IOWR ('V', 37, struct v4l2_querymenu) -+#define VIDIOC_G_INPUT _IOR ('V', 38, int) -+#define VIDIOC_S_INPUT _IOWR ('V', 39, int) -+#define VIDIOC_G_OUTPUT _IOR ('V', 46, int) -+#define VIDIOC_S_OUTPUT _IOWR ('V', 47, int) -+#define VIDIOC_ENUMOUTPUT _IOWR ('V', 48, struct v4l2_output) -+#define VIDIOC_G_AUDOUT _IOR ('V', 49, struct v4l2_audioout) -+#define VIDIOC_S_AUDOUT _IOW ('V', 50, struct v4l2_audioout) -+#define VIDIOC_G_MODULATOR _IOWR ('V', 54, struct v4l2_modulator) -+#define VIDIOC_S_MODULATOR _IOW ('V', 55, struct v4l2_modulator) -+#define VIDIOC_G_FREQUENCY _IOWR ('V', 56, struct v4l2_frequency) -+#define VIDIOC_S_FREQUENCY _IOW ('V', 57, struct v4l2_frequency) -+#define VIDIOC_CROPCAP _IOR ('V', 58, struct v4l2_cropcap) -+#define VIDIOC_G_CROP _IOWR ('V', 59, struct v4l2_crop) -+#define VIDIOC_S_CROP _IOW ('V', 60, struct v4l2_crop) -+#define VIDIOC_G_JPEGCOMP _IOR ('V', 61, struct v4l2_jpegcompression) -+#define VIDIOC_S_JPEGCOMP _IOW ('V', 62, struct v4l2_jpegcompression) -+#define VIDIOC_QUERYSTD _IOR ('V', 63, v4l2_std_id) -+#define VIDIOC_TRY_FMT _IOWR ('V', 64, struct v4l2_format) -+#define VIDIOC_ENUMAUDIO _IOWR ('V', 65, struct v4l2_audio) -+#define VIDIOC_ENUMAUDOUT _IOWR ('V', 66, struct v4l2_audioout) -+#define VIDIOC_G_PRIORITY _IOR ('V', 67, enum v4l2_priority) -+#define VIDIOC_S_PRIORITY _IOW ('V', 68, enum v4l2_priority) -+ -+/* for compatibility, will go away some day */ -+#define VIDIOC_OVERLAY_OLD _IOWR ('V', 14, int) -+#define VIDIOC_S_PARM_OLD _IOW ('V', 22, struct v4l2_streamparm) -+#define VIDIOC_S_CTRL_OLD _IOW ('V', 28, struct v4l2_control) -+#define VIDIOC_G_AUDIO_OLD _IOWR ('V', 33, struct v4l2_audio) -+#define VIDIOC_G_AUDOUT_OLD _IOWR ('V', 49, struct v4l2_audioout) -+ -+#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */ -+ -+ -+#ifdef __KERNEL__ -+/* -+ * -+ * V 4 L 2 D R I V E R H E L P E R A P I -+ * -+ * Some commonly needed functions for drivers (v4l2-common.o module) -+ */ -+#include -+ -+/* Video standard functions */ -+extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs); -+extern int v4l2_video_std_construct(struct v4l2_standard *vs, -+ int id, char *name); -+ -+/* prority handling */ -+struct v4l2_prio_state { -+ atomic_t prios[4]; -+}; -+int v4l2_prio_init(struct v4l2_prio_state *global); -+int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local, -+ enum v4l2_priority new); -+int v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local); -+int v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority *local); -+enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global); -+int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local); -+ -+/* names for fancy debug output */ -+extern char *v4l2_field_names[]; -+extern char *v4l2_type_names[]; -+extern char *v4l2_ioctl_names[]; -+ -+/* Compatibility layer interface -- v4l1-compat module */ -+typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file, -+ unsigned int cmd, void *arg); -+int v4l_compat_translate_ioctl(struct inode *inode, struct file *file, -+ int cmd, void *arg, v4l2_kioctl driver_ioctl); -+ -+#endif /* __KERNEL__ */ -+#endif /* __LINUX_VIDEODEV2_H */ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/videodev.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/videodev.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,332 @@ -+/* -+ * Video capture interface for Linux Character Device Driver. -+ * based on -+ * Alan Cox, video4linux -+ * -+ * Author: SW.LEE -+ * 2004 (C) Samsung Electronics -+ * Modified for S3C2440/S3C24A0 Interface -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+/* #include */ -+#include -+#include -+#include -+#include -+ -+ -+ -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "miscdevice.h" -+ -+ -+static DECLARE_MUTEX(videodev_lock); -+ -+const char *fimc_version = "$Id: videodev.c,v 1.1.1.1 2004/04/27 03:52:50 swlee Exp $"; -+ -+#define VIDEO_NAME "video4linux" -+ -+ -+#define VIDEO_NUM_DEVICES 2 -+static struct video_device *video_device[VIDEO_NUM_DEVICES]; -+ -+static inline struct video_device * get_vd(int nr) -+{ -+ if ( nr == CODEC_MINOR) -+ return video_device[0]; -+ else { -+ assert ( nr & PREVIEW_MINOR); -+ return video_device[1]; -+ } -+} -+ -+static inline void set_vd ( struct video_device * vd, int nr) -+{ -+ if ( nr == CODEC_MINOR) -+ video_device[0] = vd; -+ else { -+ assert ( nr & PREVIEW_MINOR); -+ video_device[1] = vd; -+ } -+} -+ -+static inline int video_release(struct inode *inode, struct file *f) -+{ -+ int minor = MINOR(inode->i_rdev); -+ struct video_device *vfd; -+ -+ vfd = get_vd(minor); -+#if 1 /* needed until all drivers are fixed */ -+ if (!vfd->release) -+ return 0; -+#endif -+ vfd->release(vfd); -+ return 0; -+} -+ -+struct video_device* video_devdata(struct file *file) -+{ -+ return video_device[iminor(file->f_dentry->d_inode)]; -+} -+ -+ -+/* -+ * Open a video device. -+ */ -+static int video_open(struct inode *inode, struct file *file) -+{ -+ int minor = MINOR(inode->i_rdev); -+ int err = 0; -+ struct video_device *vfl; -+ struct file_operations const *old_fops; -+ -+ down(&videodev_lock); -+ -+ vfl = get_vd(minor); -+ -+ old_fops = file->f_op; -+ file->f_op = fops_get(vfl->fops); -+ if(file->f_op->open) -+ err = file->f_op->open(inode,file); -+ if (err) { -+ fops_put(file->f_op); -+ file->f_op = fops_get(old_fops); -+ } -+ fops_put(old_fops); -+ up(&videodev_lock); -+ return err; -+} -+ -+/* -+ * open/release helper functions -- handle exclusive opens -+ */ -+extern int video_exclusive_open(struct inode *inode, struct file *file) -+{ -+ struct video_device *vfl = get_vd(MINOR(inode->i_rdev)); -+ int retval = 0; -+ -+ mutex_lock(&vfl->lock); -+ if (vfl->users) { -+ retval = -EBUSY; -+ } else { -+ vfl->users++; -+ } -+ mutex_unlock(&vfl->lock); -+ return retval; -+} -+ -+extern int video_exclusive_release(struct inode *inode, struct file *file) -+{ -+ struct video_device *vfl = get_vd(MINOR(inode->i_rdev)); -+ vfl->users--; -+ return 0; -+} -+ -+int -+video_usercopy(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg, -+ int (*func)(struct inode *inode, struct file *file, -+ unsigned int cmd, void *arg)) -+{ -+ char sbuf[128]; -+ void *mbuf = NULL; -+ void *parg = NULL; -+ int err = -EINVAL; -+ -+ // cmd = video_fix_command(cmd); -+ -+ /* Copy arguments into temp kernel buffer */ -+ switch (_IOC_DIR(cmd)) { -+ case _IOC_NONE: -+ parg = (void *)arg; -+ break; -+ case _IOC_READ: -+ case _IOC_WRITE: -+ case (_IOC_WRITE | _IOC_READ): -+ if (_IOC_SIZE(cmd) <= sizeof(sbuf)) { -+ parg = sbuf; -+ } else { -+ /* too big to allocate from stack */ -+ mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL); -+ if (NULL == mbuf) -+ return -ENOMEM; -+ parg = mbuf; -+ } -+ -+ err = -EFAULT; -+ if (_IOC_DIR(cmd) & _IOC_WRITE) -+ if (copy_from_user(parg, (void *)arg, _IOC_SIZE(cmd))) -+ goto out; -+ break; -+ } -+ -+ /* call driver */ -+ err = func(inode, file, cmd, parg); -+ if (err == -ENOIOCTLCMD) -+ err = -EINVAL; -+ if (err < 0) -+ goto out; -+ -+ /* Copy results into user buffer */ -+ switch (_IOC_DIR(cmd)) -+ { -+ case _IOC_READ: -+ case (_IOC_WRITE | _IOC_READ): -+ if (copy_to_user((void *)arg, parg, _IOC_SIZE(cmd))) -+ err = -EFAULT; -+ break; -+ } -+ -+out: -+ if (mbuf) -+ kfree(mbuf); -+ return err; -+} -+ -+ -+static struct file_operations video_fops= -+{ -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .open = video_open, -+ .release = video_release, -+}; -+ -+static struct miscdevice codec_dev = { -+ minor: CODEC_MINOR, -+ name : "codec", -+ fops : &video_fops -+}; -+ -+static struct miscdevice preview_dev = { -+ minor: PREVIEW_MINOR, -+ name : "preview", -+ fops : &video_fops -+}; -+ -+ -+/** -+ * video_register_device - register video4linux devices -+ * @vfd: video device structure we want to register -+ * @type: type of device to register -+ * @nr: minor number -+ * -+ * Zero is returned on success. -+ * type : ignored. -+ * nr : -+ * 0 Codec index -+ * 1 Preview index -+ */ -+int video_register_device(struct video_device *vfd, int type, int nr) -+{ -+ int ret=0; -+ -+ /* pick a minor number */ -+ down(&videodev_lock); -+ set_vd (vfd, nr); -+ vfd->minor=nr; -+ up(&videodev_lock); -+ -+ switch (vfd->minor) { -+ case CODEC_MINOR: -+ ret = misc_register(&codec_dev); -+ if (ret) { -+ printk(KERN_ERR -+ "can't misc_register : codec on minor=%d\n", CODEC_MINOR); -+ panic(" Give me misc codec \n"); -+ } -+ break; -+ case PREVIEW_MINOR: -+ ret = misc_register(&preview_dev); -+ if (ret) { -+ printk(KERN_ERR -+ "can't misc_register (preview) on minor=%d\n", PREVIEW_MINOR); -+ panic(" Give me misc codec \n"); -+ } -+ break; -+ } -+ -+#if 0 /* needed until all drivers are fixed */ -+ if (!vfd->release) -+ printk(KERN_WARNING "videodev: \"%s\" has no release callback. " -+ "Please fix your driver for proper sysfs support, see " -+ "http://lwn.net/Articles/36850/\n", vfd->name); -+#endif -+ return 0; -+} -+ -+/** -+ * video_unregister_device - unregister a video4linux device -+ * @vfd: the device to unregister -+ * -+ * This unregisters the passed device and deassigns the minor -+ * number. Future open calls will be met with errors. -+ */ -+ -+void video_unregister_device(struct video_device *vfd) -+{ -+ down(&videodev_lock); -+ -+ if(get_vd(vfd->minor)!=vfd) -+ panic("videodev: bad unregister"); -+ -+ if (vfd->minor== CODEC_MINOR) -+ misc_deregister(&codec_dev); -+ else -+ misc_deregister(&preview_dev); -+ set_vd (NULL, vfd->minor); -+ up(&videodev_lock); -+} -+ -+ -+/* -+ * Initialise video for linux -+ */ -+ -+static int __init videodev_init(void) -+{ -+// printk(KERN_INFO "FIMC2.0 Built:"__DATE__" "__TIME__"\n%s\n",fimc_version); -+ return 0; -+} -+ -+static void __exit videodev_exit(void) -+{ -+} -+ -+module_init(videodev_init) -+module_exit(videodev_exit) -+ -+EXPORT_SYMBOL(video_register_device); -+EXPORT_SYMBOL(fimc_version); -+EXPORT_SYMBOL(video_unregister_device); -+EXPORT_SYMBOL(video_usercopy); -+EXPORT_SYMBOL(video_exclusive_open); -+EXPORT_SYMBOL(video_exclusive_release); -+ -+ -+MODULE_AUTHOR("SW.LEE "); -+MODULE_DESCRIPTION("VideoDev For FIMC2.0 MISC Drivers"); -+MODULE_LICENSE("GPL"); -+ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/videodev.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/videodev.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,108 @@ -+//#ifndef __LINUX_S3C_VIDEODEV_H -+//#define __LINUX_S3C_VIDEODEV_H -+ -+#include -+#include -+#include -+ -+#if 0 -+struct video_device -+{ -+ /* device info */ -+ // struct device *dev; -+ char name[32]; -+ int type; /* v4l1 */ -+ int type2; /* v4l2 */ -+ int hardware; -+ int minor; -+ -+ /* device ops + callbacks */ -+ struct file_operations *fops; -+ void (*release)(struct video_device *vfd); -+ -+ -+#if 1 /* to be removed in 2.7.x */ -+ /* obsolete -- fops->owner is used instead */ -+ struct module *owner; -+ /* dev->driver_data will be used instead some day. -+ * Use the video_{get|set}_drvdata() helper functions, -+ * so the switch over will be transparent for you. -+ * Or use {pci|usb}_{get|set}_drvdata() directly. */ -+ void *priv; -+#endif -+ -+ /* for videodev.c intenal usage -- please don't touch */ -+ int users; /* video_exclusive_{open|close} ... */ -+ struct semaphore lock; /* ... helper function uses these */ -+ char devfs_name[64]; /* devfs */ -+ // struct class_device class_dev; /* sysfs */ -+}; -+ -+#define VIDEO_MAJOR 81 -+ -+#define VFL_TYPE_GRABBER 0 -+ -+ -+extern int video_register_device(struct video_device *, int type, int nr); -+extern void video_unregister_device(struct video_device *); -+extern struct video_device* video_devdata(struct file*); -+ -+ -+ -+struct video_picture -+{ -+ __u16 brightness; -+ __u16 hue; -+ __u16 colour; -+ __u16 contrast; -+ __u16 whiteness; /* Black and white only */ -+ __u16 depth; /* Capture depth */ -+ __u16 palette; /* Palette in use */ -+#define VIDEO_PALETTE_GREY 1 /* Linear greyscale */ -+#define VIDEO_PALETTE_HI240 2 /* High 240 cube (BT848) */ -+#define VIDEO_PALETTE_RGB565 3 /* 565 16 bit RGB */ -+#define VIDEO_PALETTE_RGB24 4 /* 24bit RGB */ -+#define VIDEO_PALETTE_RGB32 5 /* 32bit RGB */ -+#define VIDEO_PALETTE_RGB555 6 /* 555 15bit RGB */ -+#define VIDEO_PALETTE_YUV422 7 /* YUV422 capture */ -+#define VIDEO_PALETTE_YUYV 8 -+#define VIDEO_PALETTE_UYVY 9 /* The great thing about standards is ... */ -+#define VIDEO_PALETTE_YUV420 10 -+#define VIDEO_PALETTE_YUV411 11 /* YUV411 capture */ -+#define VIDEO_PALETTE_RAW 12 /* RAW capture (BT848) */ -+#define VIDEO_PALETTE_YUV422P 13 /* YUV 4:2:2 Planar */ -+#define VIDEO_PALETTE_YUV411P 14 /* YUV 4:1:1 Planar */ -+#define VIDEO_PALETTE_YUV420P 15 /* YUV 4:2:0 Planar */ -+#define VIDEO_PALETTE_YUV410P 16 /* YUV 4:1:0 Planar */ -+#define VIDEO_PALETTE_PLANAR 13 /* start of planar entries */ -+#define VIDEO_PALETTE_COMPONENT 7 /* start of component entries */ -+}; -+ -+extern int video_exclusive_open(struct inode *inode, struct file *file); -+extern int video_exclusive_release(struct inode *inode, struct file *file); -+extern int video_usercopy(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg, -+ int (*func)(struct inode *inode, struct file *file, -+ unsigned int cmd, void *arg)); -+ -+ -+ -+ -+#define VID_TYPE_CAPTURE 1 /* Can capture */ -+#define VID_TYPE_CLIPPING 32 /* Can clip */ -+#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */ -+#define VID_TYPE_SCALES 128 /* Scalable */ -+#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */ -+ -+ -+ -+#endif -+//#endif -+ -+#define VID_HARDWARE_SAMSUNG_FIMC 255 -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/camera/video-driver.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/camera/video-driver.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,624 @@ -+/* -+ Copyright (C) 2004 Samsung Electronics -+ SW.LEE -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+//#define SW_DEBUG -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "miscdevice.h" -+#include "cam_reg.h" -+#include "sensor.h" -+#include "userapp.h" -+ -+#ifdef Z_API -+#include "qt.h" -+#endif -+ -+/* Codec and Preview */ -+#define CAMIF_NUM 2 -+static camif_cfg_t fimc[CAMIF_NUM]; -+u32 *camregs; -+ -+static const char *driver_version = -+ "$Id: video-driver.c,v 1.9 2004/06/02 03:10:36 swlee Exp $"; -+extern const char *fimc_version; -+extern const char *fsm_version; -+ -+extern void camif_start_c_with_p (camif_cfg_t *cfg, camif_cfg_t *other); -+ -+camif_cfg_t * get_camif(int nr) -+{ -+ camif_cfg_t *ret = NULL; -+ switch(nr) { -+ case CODEC_MINOR: -+ ret = &fimc[0]; -+ break; -+ case PREVIEW_MINOR: -+ ret = &fimc[1]; -+ break; -+ default: -+ panic("Unknow Minor Number \n"); -+ } -+ return ret; -+} -+ -+ -+static int camif_codec_start(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ ret =camif_check_preview(cfg); -+ switch(ret) { -+ case 0: /* Play alone */ -+ DPRINTK("Start Alone \n"); -+ camif_4fsm_start(cfg); -+ cfg->gc->status |= C_WORKING; -+ break; -+ case -ERESTARTSYS: /* Busy , retry */ -+ //DPRINTK("Error \n"); -+ printk("Error \n"); -+ break; -+ case 1: -+ DPRINTK("need callback \n"); -+ ret = camif_callback_start(cfg); -+ if(ret < 0 ) { -+ printk(KERN_INFO "Busy RESTART \n"); -+ return ret; /* Busy, retry */ -+ } -+ break; -+ } -+ return ret; -+} -+ -+ -+ssize_t camif_write (struct file *f, const char *b, size_t c,loff_t *offset) -+{ -+ camif_cfg_t *cfg; -+ -+ c = 0; /* return value */ -+ DPRINTK("\n"); -+ cfg = get_camif(MINOR(f->f_dentry->d_inode->i_rdev)); -+ switch (*b) { -+ case 'O': -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ if (cfg->gc->status & C_WORKING) { -+ camif_start_c_with_p(cfg,get_camif(CODEC_MINOR)); -+ } -+ else { -+ camif_4fsm_start(cfg); -+ } -+ } -+ else{ -+ c = camif_codec_start(cfg); -+ if(c < 0) c = 1; /* Error and neet to retry */ -+ } -+ -+ break; -+ case 'X': -+ camif_p_stop(cfg); -+ break; -+ default: -+ panic("CAMERA:camif_write: Unexpected Param\n"); -+ } -+ DPRINTK("end\n"); -+ -+ return c; -+} -+ -+ -+ssize_t camif_p_read(struct file *file, char *buf, size_t count, loff_t *pos) -+{ -+ camif_cfg_t *cfg = NULL; -+ size_t end; -+ -+ cfg = get_camif(MINOR(file->f_dentry->d_inode->i_rdev)); -+ cfg->status = CAMIF_STARTED; -+ -+ if (wait_event_interruptible(cfg->waitq,cfg->status == CAMIF_INT_HAPPEN)) -+ return -ERESTARTSYS; -+ -+ cfg->status = CAMIF_STOPPED; -+ end = min_t(size_t, cfg->pp_totalsize /cfg->pp_num, count); -+ if (copy_to_user(buf, camif_g_frame(cfg), end)) -+ return -EFAULT; -+ -+ return end; -+} -+ -+ -+static ssize_t -+camif_c_read(struct file *file, char *buf, size_t count, loff_t *pos) -+{ -+ camif_cfg_t *cfg = NULL; -+ size_t end; -+ -+ /* cfg = file->private_data; */ -+ cfg = get_camif(MINOR(file->f_dentry->d_inode->i_rdev)); -+#if 0 -+ if(file->f_flags & O_NONBLOCK) { -+ printk(KERN_ERR"Don't Support NON_BLOCK \n"); -+ } -+#endif -+ -+ /* Change the below wait_event_interruptible func */ -+ if (wait_event_interruptible(cfg->waitq,cfg->status == CAMIF_INT_HAPPEN)) -+ return -ERESTARTSYS; -+ cfg->status = CAMIF_STOPPED; -+ end = min_t(size_t, cfg->pp_totalsize /cfg->pp_num, count); -+ if (copy_to_user(buf, camif_g_frame(cfg), end)) -+ return -EFAULT; -+ return end; -+} -+ -+ -+static irqreturn_t camif_c_irq(int irq, void *dev_id) -+{ -+ camif_cfg_t *cfg = (camif_cfg_t *)dev_id; -+ -+ DPRINTK("\n"); -+ camif_g_fifo_status(cfg); -+ camif_g_frame_num(cfg); -+ if(camif_enter_c_4fsm(cfg) != INSTANT_SKIP) -+ wake_up_interruptible(&cfg->waitq); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t camif_p_irq(int irq, void *dev_id) -+{ -+ camif_cfg_t *cfg = (camif_cfg_t *)dev_id; -+ -+ DPRINTK("\n"); -+ camif_g_fifo_status(cfg); -+ camif_g_frame_num(cfg); -+ if(camif_enter_p_4fsm(cfg) != INSTANT_SKIP) -+ wake_up_interruptible(&cfg->waitq); -+#if 0 -+ if( (cfg->perf.frames % 5) == 0) -+ DPRINTK("5\n"); -+#endif -+ -+ return IRQ_HANDLED; -+} -+ -+static void camif_release_irq(camif_cfg_t *cfg) -+{ -+ disable_irq(cfg->irq); -+ free_irq(cfg->irq, cfg); -+} -+ -+static int camif_irq_request(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ -+ if (cfg->dma_type & CAMIF_CODEC) { -+ if ((ret = request_irq(cfg->irq, camif_c_irq, -+ 0, cfg->shortname, cfg))) { -+ printk("request_irq(CAM_C) failed.\n"); -+ } -+ } -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ if ((ret = request_irq(cfg->irq, camif_p_irq, -+ 0, cfg->shortname, cfg))) { -+ printk("request_irq(CAM_P) failed.\n"); -+ } -+ } -+ return 0; -+} -+ -+static void camif_init_sensor(camif_cfg_t *cfg) -+{ -+ camif_gc_t *gc = cfg->gc; -+ if (!gc->sensor) -+ panic("CAMERA:I2C Client(Img Sensor)Not registered\n"); -+ if(!gc->init_sensor) { -+ camif_reset(gc->reset_type, gc->reset_udelay); -+ gc->sensor->driver->command(gc->sensor,SENSOR_INIT,NULL); -+ gc->init_sensor = 1; /*sensor init done */ -+ } -+ gc->sensor->driver->command(gc->sensor, USER_ADD, NULL); -+} -+ -+static int camif_open(struct inode *inode, struct file *file) -+{ -+ int err; -+ camif_cfg_t * cfg = get_camif(MINOR(inode->i_rdev)); -+ -+ if(cfg->dma_type & CAMIF_PREVIEW) { -+ if(down_interruptible(&cfg->gc->lock)) -+ return -ERESTARTSYS; -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ cfg->gc->status &= ~PNOTWORKING; -+ } -+ up(&cfg->gc->lock); -+ } -+ err = video_exclusive_open(inode,file); -+ cfg->gc->user++; -+ cfg->status = CAMIF_STOPPED; -+ if (err < 0) return err; -+ if (file->f_flags & O_NONCAP ) { -+ printk("Don't Support Non-capturing open \n"); -+ return 0; -+ } -+ file->private_data = cfg; -+ camif_irq_request(cfg); -+ camif_init_sensor(cfg); -+ return 0; -+} -+ -+#if 0 -+static void print_pregs(void) -+{ -+ printk(" CISRCFMT 0x%08X \n", CISRCFMT); -+ printk(" CIWDOFST 0x%08X \n", CIWDOFST); -+ printk(" CIGCTRL 0x%08X \n", CIGCTRL); -+ printk(" CIPRTRGFMT 0x%08X \n", CIPRTRGFMT); -+ printk(" CIPRCTRL 0x%08X \n", CIPRCTRL); -+ printk(" CIPRSCPRERATIO 0x%08X \n", CIPRSCPRERATIO); -+ printk(" CIPRSCPREDST 0x%08X \n", CIPRSCPREDST); -+ printk(" CIPRSCCTRL 0x%08X \n", CIPRSCCTRL); -+ printk(" CIPRTAREA 0x%08X \n", CIPRTAREA); -+ printk(" CIPRSTATUS 0x%08X \n", CIPRSTATUS); -+ printk(" CIIMGCPT 0x%08X \n", CIIMGCPT); -+} -+ -+static void print_cregs(void) -+{ -+ printk(" CISRCFMT 0x%08X \n", CISRCFMT); -+ printk(" CIWDOFST 0x%08X \n", CIWDOFST); -+ printk(" CIGCTRL 0x%08X \n", CIGCTRL); -+ printk(" CICOCTRL 0x%8X \n", CICOCTRL); -+ printk(" CICOSCPRERATIO 0x%08X \n", CICOSCPRERATIO); -+ printk(" CICOSCPREDST 0x%08X \n", CICOSCPREDST); -+ printk(" CICOSCCTRL 0x%08X \n", CICOSCCTRL); -+ printk(" CICOTAREA 0x%08X \n", CICOTAREA); -+ printk(" CICOSTATUS 0x%8X \n", CICOSTATUS); -+ printk(" CIIMGCPT 0x%08X \n", CIIMGCPT); -+} -+#endif -+ -+ -+static int camif_release(struct inode *inode, struct file *file) -+{ -+ camif_cfg_t * cfg = get_camif(MINOR(inode->i_rdev)); -+ -+ //DPRINTK(" cfg->status 0x%0X cfg->gc->status 0x%0X \n", cfg->status,cfg->gc->status ); -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ if(down_interruptible(&cfg->gc->lock)) -+ return -ERESTARTSYS; -+ cfg->gc->status &= ~PWANT2START; -+ cfg->gc->status |= PNOTWORKING; -+ up(&cfg->gc->lock); -+ } -+ else { -+ cfg->gc->status &= ~CWANT2START; /* No need semaphore */ -+ } -+ camif_dynamic_close(cfg); -+ camif_release_irq(cfg); -+ video_exclusive_release(inode,file); -+ camif_p_stop(cfg); -+ cfg->gc->sensor->driver->command(cfg->gc->sensor, USER_EXIT, NULL); -+ cfg->gc->user--; -+ cfg->status = CAMIF_STOPPED; -+ return 0; -+} -+ -+static void fimc_config(camif_cfg_t *cfg,u32 x, u32 y, int bpp) -+{ -+ cfg->target_x = x; -+ cfg->target_y = y; -+ -+ switch (bpp) { -+ case 16: -+ cfg->fmt = CAMIF_RGB16; -+ break; -+ case 24: -+ cfg->fmt = CAMIF_RGB24; -+ break; -+ case 420: -+ cfg->fmt = CAMIF_IN_YCBCR422|CAMIF_OUT_YCBCR420; -+ break; -+ case 422: -+ cfg->fmt = CAMIF_IN_YCBCR422|CAMIF_OUT_YCBCR422; -+ break; -+ default: -+ panic("Wrong BPP \n"); -+ } -+} -+ -+ -+static int -+camif_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int ret = 0; -+ camif_cfg_t *cfg = file->private_data; -+ camif_param_t par; -+ -+ switch (cmd) { -+ case CMD_CAMERA_INIT: -+ if (copy_from_user(&par,(camif_param_t *)arg, -+ sizeof(camif_param_t))) -+ return -EFAULT; -+ fimc_config(cfg,par.dst_x, par.dst_y, par.bpp); -+ if (camif_dynamic_open(cfg)) { -+ printk(" Eror Happens \n"); -+ ret = -1; -+ } -+ -+ switch (par.flip) { -+ case 3 : -+ cfg->flip = CAMIF_FLIP_MIRROR; -+ break; -+ case 1 : -+ cfg->flip = CAMIF_FLIP_X; -+ break; -+ case 2 : -+ cfg->flip = CAMIF_FLIP_Y; -+ break; -+ case 0 : -+ default: -+ cfg->flip = CAMIF_FLIP; -+ } -+ break; -+ /* Todo -+ case CMD_SENSOR_BRIGHTNESS: -+ cfg->gc->sensor->driver->command(cfg->gc->sensor, SENSOR_BRIGHTNESS, NULL); -+ break; -+ */ -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ -+ return ret; -+} -+ -+ -+#if 0 -+static int camif_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+// camif_cfg_t *cfg = file->private_data; -+ -+ -+ switch (cmd) { -+/* case Some_other_action */ -+ default: -+ return video_usercopy(inode, file, cmd, arg, camif_do_ioctl); -+ } -+} -+#endif -+ -+static struct file_operations camif_c_fops = -+{ -+ .owner = THIS_MODULE, -+ .open = camif_open, -+ .release = camif_release, -+ .ioctl = camif_ioctl, -+ .read = camif_c_read, -+ .write = camif_write, -+}; -+ -+static struct file_operations camif_p_fops = -+{ -+ .owner = THIS_MODULE, -+ .open = camif_open, -+ .release = camif_release, -+ .ioctl = camif_ioctl, -+#ifdef Z_API -+ .read = z_read, -+ .write = z_write, -+#else -+ .read = camif_p_read, -+ .write = camif_write, -+#endif -+}; -+ -+static struct video_device codec_template = -+{ -+ .name = "CODEC_IF", -+ .type = VID_TYPE_CAPTURE|VID_TYPE_CLIPPING|VID_TYPE_SCALES, -+/* .hardware = VID_HARDWARE_SAMSUNG_FIMC20, */ -+ .fops = &camif_c_fops, -+// .release = camif_release -+ .minor = -1, -+}; -+ -+static struct video_device preview_template = -+{ -+ .name = "PREVIEW_IF", -+ .type = VID_TYPE_CAPTURE|VID_TYPE_CLIPPING|VID_TYPE_SCALES, -+/* .hardware = VID_HARDWARE_SAMSUNG_FIMC20, */ -+ .fops = &camif_p_fops, -+ .minor = -1, -+}; -+ -+static int preview_init(camif_cfg_t *cfg) -+{ -+ char name[16]="CAM_PREVIEW"; -+ -+ memset(cfg, 0, sizeof(camif_cfg_t)); -+ cfg->target_x = 640; -+ cfg->target_y = 480; -+ cfg->pp_num = 4; -+ cfg->dma_type = CAMIF_PREVIEW; -+ cfg->fmt = CAMIF_RGB16; -+ cfg->flip = CAMIF_FLIP_Y; -+ cfg->v = &preview_template; -+ mutex_init(&cfg->v->lock); -+ cfg->irq = IRQ_S3C2440_CAM_P; -+ -+ strcpy(cfg->shortname,name); -+ init_waitqueue_head(&cfg->waitq); -+ cfg->status = CAMIF_STOPPED; -+ return cfg->status; -+} -+ -+static int codec_init(camif_cfg_t *cfg) -+{ -+ char name[16]="CAM_CODEC"; -+ -+ memset(cfg, 0, sizeof(camif_cfg_t)); -+ cfg->target_x = 176; -+ cfg->target_y = 144; -+ cfg->pp_num = 4; -+ cfg->dma_type = CAMIF_CODEC; -+ cfg->fmt = CAMIF_IN_YCBCR422|CAMIF_OUT_YCBCR420; -+ cfg->flip = CAMIF_FLIP_X; -+ cfg->v = &codec_template; -+ mutex_init(&cfg->v->lock); -+ cfg->irq = IRQ_S3C2440_CAM_C; -+ strcpy(cfg->shortname,name); -+ init_waitqueue_head(&cfg->waitq); -+ cfg->status = CAMIF_STOPPED; -+ return cfg->status; -+} -+ -+static void camif_init(void) -+{ -+ camif_setup_sensor(); -+} -+ -+ -+ -+static void print_version(void) -+{ -+ printk(KERN_INFO"FIMC built:"__DATE__ " "__TIME__"\n%s\n%s\n%s\n", -+ fimc_version, driver_version,fsm_version); -+} -+ -+ -+static int camif_m_in(void) -+{ -+ int ret = -EINVAL; -+ camif_cfg_t * cfg; -+ -+ printk(KERN_INFO"Starting S3C2440 Camera Driver\n"); -+ -+ camregs = ioremap(CAM_BASE_ADD, 0x100); -+ if (!camregs) { -+ printk(KERN_ERR"Unable to map camera regs\n"); -+ ret = -ENOMEM; -+ goto bail1; -+ } -+ -+ camif_init(); -+ cfg = get_camif(CODEC_MINOR); -+ codec_init(cfg); -+ -+ ret = video_register_device(cfg->v,0,CODEC_MINOR); -+ if (ret) { -+ printk(KERN_ERR"Couldn't register codec driver.\n"); -+ goto bail2; -+ } -+ cfg = get_camif(PREVIEW_MINOR); -+ preview_init(cfg); -+ ret = video_register_device(cfg->v,0,PREVIEW_MINOR); -+ if (ret) { -+ printk(KERN_ERR"Couldn't register preview driver.\n"); -+ goto bail3; /* hm seems it us unregistered the once */ -+ } -+ -+ print_version(); -+ return 0; -+ -+bail3: -+ video_unregister_device(cfg->v); -+bail2: -+ iounmap(camregs); -+ camregs = NULL; -+bail1: -+ return ret; -+} -+ -+static void unconfig_device(camif_cfg_t *cfg) -+{ -+ video_unregister_device(cfg->v); -+ camif_hw_close(cfg); -+ iounmap(camregs); -+ //memset(cfg, 0, sizeof(camif_cfg_t)); -+ camregs = NULL; -+} -+ -+static void camif_m_out(void) /* module out */ -+{ -+ camif_cfg_t *cfg; -+ -+ cfg = get_camif(CODEC_MINOR); -+ unconfig_device(cfg); -+ cfg = get_camif(PREVIEW_MINOR); -+ unconfig_device(cfg); -+ -+ return; -+} -+ -+void camif_register_decoder(struct i2c_client *ptr) -+{ -+ camif_cfg_t *cfg; -+ void * data = i2c_get_clientdata(ptr); -+ -+ cfg =get_camif(CODEC_MINOR); -+ cfg->gc = (camif_gc_t *)(data); -+ -+ cfg =get_camif(PREVIEW_MINOR); -+ cfg->gc = (camif_gc_t *)(data); -+ -+ sema_init(&cfg->gc->lock, 1); /* global lock for both Codec and Preview */ -+ cfg->gc->status |= PNOTWORKING; /* Default Value */ -+ camif_hw_open(cfg->gc); -+} -+ -+void camif_unregister_decoder(struct i2c_client *ptr) -+{ -+ camif_gc_t *gc; -+ void * data = i2c_get_clientdata(ptr); -+ -+ gc = (camif_gc_t *)(data); -+ gc->init_sensor = 0; /* need to modify */ -+} -+ -+module_init(camif_m_in); -+module_exit(camif_m_out); -+ -+EXPORT_SYMBOL(camif_register_decoder); -+EXPORT_SYMBOL(camif_unregister_decoder); -+ -+MODULE_AUTHOR("SW.LEE "); -+MODULE_DESCRIPTION("Video-Driver For Fimc2.0 MISC Drivers"); -+MODULE_LICENSE("GPL"); -+ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/fiq_c_isr.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/fiq_c_isr.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,291 @@ -+/* -+ * Copyright 2007 Andy Green -+ * S3C modfifications -+ * Copyright 2008 Andy Green -+ */ -+ -+#include -+#include -+#include -+#include -+#include "fiq_c_isr.h" -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+ -+#include -+#include -+ -+/* -+ * Major Caveats for using FIQ -+ * --------------------------- -+ * -+ * 1) it CANNOT touch any vmalloc()'d memory, only memory -+ * that was kmalloc()'d. Static allocations in the monolithic kernel -+ * are kmalloc()'d so they are okay. You can touch memory-mapped IO, but -+ * the pointer for it has to have been stored in kmalloc'd memory. The -+ * reason for this is simple: every now and then Linux turns off interrupts -+ * and reorders the paging tables. If a FIQ happens during this time, the -+ * virtual memory space can be partly or entirely disordered or missing. -+ * -+ * 2) Because vmalloc() is used when a module is inserted, THIS FIQ -+ * ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module. But the way -+ * it is set up, you can all to enable and disable it from your module -+ * and intercommunicate with it through struct fiq_ipc -+ * fiq_ipc which you can define in -+ * asm/archfiq_ipc_type.h. The reason is the same as above, a -+ * FIQ could happen while even the ISR is not present in virtual memory -+ * space due to pagetables being changed at the time. -+ * -+ * 3) You can't call any Linux API code except simple macros -+ * - understand that FIQ can come in at any time, no matter what -+ * state of undress the kernel may privately be in, thinking it -+ * locked the door by turning off interrupts... FIQ is an -+ * unstoppable monster force (which is its value) -+ * - they are not vmalloc()'d memory safe -+ * - they might do crazy stuff like sleep: FIQ pisses fire and -+ * is not interested in 'sleep' that the weak seem to need -+ * - calling APIs from FIQ can re-enter un-renterable things -+ * - summary: you cannot interoperate with linux APIs directly in the FIQ ISR -+ * -+ * If you follow these rules, it is fantastic, an extremely powerful, solid, -+ * genuine hard realtime feature. -+ * -+ */ -+ -+/* more than enough to cover our jump instruction to the isr */ -+#define SIZEOF_FIQ_JUMP 8 -+/* more than enough to cover s3c2440_fiq_isr() in 4K blocks */ -+#define SIZEOF_FIQ_ISR 0x2000 -+/* increase the size of the stack that is active during FIQ as needed */ -+static u8 u8aFiqStack[4096]; -+ -+/* only one FIQ ISR possible, okay to do these here */ -+u32 _fiq_ack_mask; /* used by isr exit define */ -+unsigned long _fiq_count_fiqs; /* used by isr exit define */ -+static int _fiq_irq; /* private ; irq index we were started with, or 0 */ -+struct s3c2410_pwm pwm_timer_fiq; -+int _fiq_timer_index; -+u16 _fiq_timer_divisor; -+ -+ -+/* this function must live in the monolithic kernel somewhere! A module is -+ * NOT good enough! -+ */ -+extern void __attribute__ ((naked)) s3c2440_fiq_isr(void); -+ -+ -+/* this is copied into the hard FIQ vector during init */ -+ -+static void __attribute__ ((naked)) s3c2440_FIQ_Branch(void) -+{ -+ asm __volatile__ ( -+ "mov pc, r8 ; " -+ ); -+} -+ -+/* sysfs */ -+ -+static ssize_t show_count(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ return sprintf(buf, "%ld\n", _fiq_count_fiqs); -+} -+ -+static DEVICE_ATTR(count, 0444, show_count, NULL); -+ -+static struct attribute *s3c2440_fiq_sysfs_entries[] = { -+ &dev_attr_count.attr, -+ NULL -+}; -+ -+static struct attribute_group s3c2440_fiq_attr_group = { -+ .name = "fiq", -+ .attrs = s3c2440_fiq_sysfs_entries, -+}; -+ -+/* -+ * call this from your kernel module to set up the FIQ ISR to service FIQs, -+ * You need to have configured your FIQ input pin before anything will happen -+ * -+ * call it with, eg, IRQ_TIMER3 from asm-arm/arch-s3c2410/irqs.h -+ * -+ * you still need to clear the source interrupt in S3C2410_INTMSK to get -+ * anything good happening -+ */ -+static int fiq_init_irq_source(int irq_index_fiq) -+{ -+ int rc = 0; -+ -+ if (!irq_index_fiq) /* no interrupt */ -+ goto bail; -+ -+ local_fiq_disable(); -+ -+ _fiq_irq = irq_index_fiq; -+ _fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET); -+ _fiq_timer_index = (irq_index_fiq - IRQ_TIMER0); -+ -+ /* set up the timer to operate as a pwm device */ -+ -+ rc = s3c2410_pwm_init(&pwm_timer_fiq); -+ if (rc) -+ goto bail; -+ -+ pwm_timer_fiq.timerid = PWM0 + _fiq_timer_index; -+ pwm_timer_fiq.prescaler = (6 - 1) / 2; -+ pwm_timer_fiq.divider = S3C2410_TCFG1_MUX3_DIV2; -+ /* default rate == ~32us */ -+ pwm_timer_fiq.counter = pwm_timer_fiq.comparer = 3000; -+ -+ rc = s3c2410_pwm_enable(&pwm_timer_fiq); -+ if (rc) -+ goto bail; -+ -+ s3c2410_pwm_start(&pwm_timer_fiq); -+ -+ _fiq_timer_divisor = 0xffff; /* so kick will work initially */ -+ -+ /* let our selected interrupt be a magic FIQ interrupt */ -+ __raw_writel(_fiq_ack_mask, S3C2410_INTMOD); -+ -+ /* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */ -+ local_fiq_enable(); -+bail: -+ return rc; -+} -+ -+ -+/* call this from your kernel module to disable generation of FIQ actions */ -+static void fiq_disable_irq_source(void) -+{ -+ /* nothing makes FIQ any more */ -+ __raw_writel(0, S3C2410_INTMOD); -+ local_fiq_disable(); -+ _fiq_irq = 0; /* no active source interrupt now either */ -+} -+ -+/* -+ * fiq_kick() forces a FIQ event to happen shortly after leaving the routine -+ */ -+void fiq_kick(void) -+{ -+ unsigned long flags; -+ u32 tcon; -+ -+ /* we have to take care about FIQ because this modification is -+ * non-atomic, FIQ could come in after the read and before the -+ * writeback and its changes to the register would be lost -+ * (platform INTMSK mod code is taken care of already) -+ */ -+ local_save_flags(flags); -+ local_fiq_disable(); -+ /* allow FIQs to resume */ -+ __raw_writel(__raw_readl(S3C2410_INTMSK) & -+ ~(1 << (_fiq_irq - S3C2410_CPUIRQ_OFFSET)), -+ S3C2410_INTMSK); -+ tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START; -+ /* fake the timer to a count of 1 */ -+ __raw_writel(1, S3C2410_TCNTB(_fiq_timer_index)); -+ __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON); -+ __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START, -+ S3C2410_TCON); -+ __raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON); -+ local_irq_restore(flags); -+} -+EXPORT_SYMBOL_GPL(fiq_kick); -+ -+ -+ -+ -+static int __init sc32440_fiq_probe(struct platform_device *pdev) -+{ -+ struct resource *r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ -+ if (!r) -+ return -EIO; -+ -+ /* configure for the interrupt we are meant to use */ -+ printk(KERN_INFO"Enabling FIQ using irq %d\n", r->start); -+ -+ fiq_init_irq_source(r->start); -+ -+ return sysfs_create_group(&pdev->dev.kobj, &s3c2440_fiq_attr_group); -+} -+ -+static int sc32440_fiq_remove(struct platform_device *pdev) -+{ -+ fiq_disable_irq_source(); -+ sysfs_remove_group(&pdev->dev.kobj, &s3c2440_fiq_attr_group); -+ return 0; -+} -+ -+static void fiq_set_vector_and_regs(void) -+{ -+ struct pt_regs regs; -+ -+ /* prep the special FIQ mode regs */ -+ memset(®s, 0, sizeof(regs)); -+ regs.ARM_r8 = (unsigned long)s3c2440_fiq_isr; -+ regs.ARM_sp = (unsigned long)u8aFiqStack + sizeof(u8aFiqStack) - 4; -+ /* set up the special FIQ-mode-only registers from our regs */ -+ set_fiq_regs(®s); -+ /* copy our jump to the real ISR into the hard vector address */ -+ set_fiq_handler(s3c2440_FIQ_Branch, SIZEOF_FIQ_JUMP); -+} -+ -+#ifdef CONFIG_PM -+static int sc32440_fiq_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ /* nothing makes FIQ any more */ -+ __raw_writel(0, S3C2410_INTMOD); -+ local_fiq_disable(); -+ -+ return 0; -+} -+ -+static int sc32440_fiq_resume(struct platform_device *pdev) -+{ -+ fiq_set_vector_and_regs(); -+ fiq_init_irq_source(_fiq_irq); -+ return 0; -+} -+#else -+#define sc32440_fiq_suspend NULL -+#define sc32440_fiq_resume NULL -+#endif -+ -+static struct platform_driver sc32440_fiq_driver = { -+ .driver = { -+ .name = "sc32440_fiq", -+ .owner = THIS_MODULE, -+ }, -+ -+ .probe = sc32440_fiq_probe, -+ .remove = __devexit_p(sc32440_fiq_remove), -+ .suspend = sc32440_fiq_suspend, -+ .resume = sc32440_fiq_resume, -+}; -+ -+static int __init sc32440_fiq_init(void) -+{ -+ fiq_set_vector_and_regs(); -+ -+ return platform_driver_register(&sc32440_fiq_driver); -+} -+ -+static void __exit sc32440_fiq_exit(void) -+{ -+ fiq_disable_irq_source(); -+} -+ -+MODULE_AUTHOR("Andy Green "); -+MODULE_LICENSE("GPL"); -+ -+module_init(sc32440_fiq_init); -+module_exit(sc32440_fiq_exit); -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/fiq_c_isr.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/fiq_c_isr.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,66 @@ -+#ifndef _LINUX_FIQ_C_ISR_H -+#define _LINUX_FIQ_C_ISR_H -+ -+#include -+ -+extern unsigned long _fiq_count_fiqs; -+extern u32 _fiq_ack_mask; -+extern int _fiq_timer_index; -+extern u16 _fiq_timer_divisor; -+ -+/* This CANNOT be implemented in a module -- it has to be used in code -+ * included in the monolithic kernel -+ */ -+ -+#define FIQ_HANDLER_START() \ -+void __attribute__ ((naked)) s3c2440_fiq_isr(void) \ -+{\ -+ /*\ -+ * you can declare local vars here, take care to set the frame size\ -+ * below accordingly if there are more than a few dozen bytes of them\ -+ */\ -+ -+/* stick your locals here :-) -+ * Do NOT initialize them here! define them and initialize them after -+ * FIQ_HANDLER_ENTRY() is done. -+ */ -+ -+#define FIQ_HANDLER_ENTRY(LOCALS, FRAME) \ -+ const int _FIQ_FRAME_SIZE = FRAME; \ -+ /* entry takes care to store registers we will be treading on here */\ -+ asm __volatile__ (\ -+ "mov ip, sp ;"\ -+ /* stash FIQ and r0-r8 normal regs */\ -+ "stmdb sp!, {r0-r12, lr};"\ -+ /* allow SP to get some space */\ -+ "sub sp, sp, %1 ;"\ -+ /* !! THIS SETS THE FRAME, adjust to > sizeof locals */\ -+ "sub fp, sp, %0 ;"\ -+ :\ -+ : "rI" (LOCALS), "rI" (FRAME)\ -+ :"r9"\ -+ ); -+ -+/* stick your ISR code here and then end with... */ -+ -+#define FIQ_HANDLER_END() \ -+ _fiq_count_fiqs++;\ -+ __raw_writel(_fiq_ack_mask, S3C2410_SRCPND);\ -+\ -+ /* exit back to normal mode restoring everything */\ -+ asm __volatile__ (\ -+ /* pop our allocation */\ -+ "add sp, sp, %0 ;"\ -+ /* return FIQ regs back to pristine state\ -+ * and get normal regs back\ -+ */\ -+ "ldmia sp!, {r0-r12, lr};"\ -+\ -+ /* return */\ -+ "subs pc, lr, #4;"\ -+ : \ -+ : "rI" (_FIQ_FRAME_SIZE) \ -+ );\ -+} -+ -+#endif /* _LINUX_FIQ_C_ISR_H */ -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2440/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -22,6 +22,13 @@ config S3C2440_DMA - help - Support for S3C2440 specific DMA code5A - -+config S3C2440_C_FIQ -+ bool "FIQ ISR support in C" -+ depends on ARCH_S3C2410 -+ select FIQ -+ help -+ Support for S3C2440 FIQ support in C -- see -+ ./arch/arm/macs3c2440/fiq_c_isr.c - - menu "S3C2440 Machines" - -@@ -67,6 +74,37 @@ config SMDK2440_CPU2440 - default y if ARCH_S3C2440 - select CPU_S3C2440 - -+config MACH_HXD8 -+ bool "FIC HXD8" -+ select CPU_S3C2440 -+ select SENSORS_PCF50606 -+ help -+ Say Y here if you are using the FIC Neo1973 GSM Phone -+ -+config MACH_NEO1973_GTA02 -+ bool "FIC Neo1973 GSM Phone (GTA02 Hardware)" -+ select CPU_S3C2442 -+ select SENSORS_PCF50633 -+ select POWER_SUPPLY -+ select GTA02_HDQ -+ help -+ Say Y here if you are using the FIC Neo1973 GSM Phone -+ -+config NEO1973_GTA02_2440 -+ bool "Old FIC Neo1973 GTA02 hardware using S3C2440 CPU" -+ depends on MACH_NEO1973_GTA02 -+ select CPU_S3C2440 -+ help -+ Say Y here if you are using an early hardware revision -+ of the FIC/Openmoko Neo1973 GTA02 GSM Phone. -+ -+config MACH_M800 -+ bool "E-TEN glofiish M800/X800" -+ select CPU_S3C2442 -+ help -+ Say Y here if you are using the E-TEN glofiish M800/X800. -+ - - endmenu - -+#source "arch/arm/mach-s3c2440/camera/Kconfig" -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/mach-glofiish.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/mach-glofiish.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,620 @@ -+/* -+ * linux/arch/arm/mach-s3c2440/mach-glofiish.c -+ * -+ * S3C2440 Machine Support for the E-TEN glofiish X800/M800 -+ * -+ * Copyright (C) 2008 by Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* -+ * this gets called every 1ms when we paniced. -+ */ -+ -+static long glofiish_panic_blink(long count) -+{ -+ long delay = 0; -+ static long last_blink; -+ static char led; -+ -+ if (count - last_blink < 100) /* 200ms period, fast blink */ -+ return 0; -+ -+ /* FIXME */ -+#if 0 -+ led ^= 1; -+ s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT); -+ neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, led); -+ -+ last_blink = count; -+#endif -+ return delay; -+} -+ -+struct platform_device gta02_version_device = { -+ .name = "neo1973-version", -+ .num_resources = 0, -+}; -+ -+struct platform_device gta02_resume_reason_device = { -+ .name = "neo1973-resume", -+ .num_resources = 0, -+}; -+ -+struct platform_device gta02_memconfig_device = { -+ .name = "neo1973-memconfig", -+ .num_resources = 0, -+}; -+ -+static struct map_desc m800_iodesc[] __initdata = { -+ { -+ .virtual = 0xe0000000, -+ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000), -+ .length = SZ_1M, -+ .type = MT_DEVICE -+ }, -+}; -+ -+#define UCON S3C2410_UCON_DEFAULT -+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -+ -+static struct s3c2410_uartcfg m800_uartcfgs[] = { -+ [0] = { -+ .hwport = 0, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+ [1] = { -+ .hwport = 1, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+ [2] = { -+ .hwport = 2, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+ -+}; -+ -+/* Configuration for 480x640 toppoly TD028TTEC1. -+ * Do not mark this as __initdata or it will break! */ -+static struct s3c2410fb_display glofiish_displays[] = { -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 43, -+ .height = 58, -+ .xres = 480, -+ .yres = 640, -+ .bpp = 16, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 2, -+ .right_margin = 2, -+ .hsync_len = 2, -+ .upper_margin = 2, -+ .lower_margin = 66, -+ .vsync_len = 2, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVCLK | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME | -+ S3C2410_LCDCON5_PWREN | -+ S3C2410_LCDCON5_HWSWP, -+ }, -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 43, -+ .height = 58, -+ .xres = 480, -+ .yres = 640, -+ .bpp = 32, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 104, -+ .right_margin = 8, -+ .hsync_len = 8, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .vsync_len = 2, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVCLK | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME | -+ S3C2410_LCDCON5_PWREN | -+ S3C2410_LCDCON5_HWSWP, -+ }, -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 43, -+ .height = 58, -+ .xres = 240, -+ .yres = 320, -+ .bpp = 16, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 104, -+ .right_margin = 8, -+ .hsync_len = 8, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .vsync_len = 2, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVCLK | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME | -+ S3C2410_LCDCON5_PWREN | -+ S3C2410_LCDCON5_HWSWP, -+ }, -+}; -+ -+static struct s3c2410fb_mach_info glofiish_lcd_cfg __initdata = { -+ .displays = glofiish_displays, -+ .num_displays = ARRAY_SIZE(glofiish_displays), -+ .default_display = 0, -+ -+ .lpcsel = ((0xCE6) & ~7) | 1<<4, -+}; -+ -+ -+static struct resource m800_sdio_resources[] = { -+ [0] = { -+ .flags = IORESOURCE_IRQ, -+ .start = IRQ_SDI, -+ .end = IRQ_SDI, -+ }, -+ [1] = { -+ .flags = IORESOURCE_MEM, -+ .start = S3C2410_PA_SDI, -+ .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1, -+ }, -+ [2] = { -+ .flags = IORESOURCE_DMA, -+ .start = 0, /* Channel 0 for SDI */ -+ .end = 0, -+ }, -+}; -+ -+static struct platform_device *glofiish_devices[] __initdata = { -+ &s3c_device_usb, -+ &s3c_device_lcd, -+ &s3c_device_wdt, -+ &s3c_device_i2c, -+ &s3c_device_iis, -+ &s3c_device_sdi, -+ &s3c_device_usbgadget, -+ &s3c_device_nand, -+ &s3c_device_ts, -+}; -+ -+static struct s3c2410_nand_set glofiish_nand_sets[] = { -+ [0] = { -+ .name = "glofiish-nand", -+ .nr_chips = 1, -+ .flags = S3C2410_NAND_BBT, -+ }, -+}; -+ -+/* choose a set of timings derived from S3C@2442B MCP54 -+ * data sheet (K5D2G13ACM-D075 MCP Memory) -+ */ -+ -+static struct s3c2410_platform_nand glofiish_nand_info = { -+ .tacls = 0, -+ .twrph0 = 25, -+ .twrph1 = 15, -+ .nr_sets = ARRAY_SIZE(glofiish_nand_sets), -+ .sets = glofiish_nand_sets, -+ .software_ecc = 1, -+}; -+ -+static struct s3c24xx_mci_pdata glofiish_mmc_cfg = { -+ .gpio_detect = M800_GPIO_nSD_DETECT, -+ .set_power = NULL, -+ .ocr_avail = MMC_VDD_32_33, -+}; -+ -+static void glofiish_udc_command(enum s3c2410_udc_cmd_e cmd) -+{ -+ printk(KERN_DEBUG "%s(%d)\n", __func__, cmd); -+ -+ switch (cmd) { -+ case S3C2410_UDC_P_ENABLE: -+ s3c2410_gpio_setpin(M800_GPIO_USB_PULLUP, 1); -+ break; -+ case S3C2410_UDC_P_DISABLE: -+ s3c2410_gpio_setpin(M800_GPIO_USB_PULLUP, 0); -+ break; -+ case S3C2410_UDC_P_RESET: -+ /* FIXME! */ -+ break; -+ default: -+ break; -+ } -+} -+ -+/* get PMU to set USB current limit accordingly */ -+ -+static void glofiish_udc_vbus_draw(unsigned int ma) -+{ -+ //pcf50633_notify_usb_current_limit_change(pcf50633_global, ma); -+} -+ -+static struct s3c2410_udc_mach_info glofiish_udc_cfg = { -+ .vbus_draw = glofiish_udc_vbus_draw, -+ .udc_command = glofiish_udc_command, -+ -+}; -+ -+static struct s3c2410_ts_mach_info glofiish_ts_cfg = { -+ .delay = 10000, -+ .presc = 50000000 / 1000000, /* 50 MHz PCLK / 1MHz */ -+ /* simple averaging, 2^n samples */ -+ .oversampling_shift = 5, -+ /* averaging filter length, 2^n */ -+ .excursion_filter_len_bits = 5, -+ /* flagged for beauty contest on next sample if differs from -+ * average more than this -+ */ -+ .reject_threshold_vs_avg = 2, -+}; -+ -+ -+/* SPI: LCM control interface attached to Glamo3362 */ -+ -+static void m800_jbt6k74_reset(int devidx, int level) -+{ -+ //glamo_lcm_reset(level); -+ printk(KERN_DEBUG "gta01_jbt6k74_reset\n"); -+} -+ -+/* finally bring up deferred backlight resume now LCM is resumed itself */ -+ -+static void m800_jbt6k74_resuming(int devidx) -+{ -+ //pcf50633_backlight_resume(pcf50633_global); -+ //gta01bl_deferred_resume(); -+} -+ -+const struct jbt6k74_platform_data jbt6k74_pdata = { -+ .reset = m800_jbt6k74_reset, -+ .resuming = m800_jbt6k74_resuming, -+}; -+ -+static struct spi_board_info glofiish_spi_board_info[] = { -+ { -+ .modalias = "jbt6k74", -+ /* platform_data */ -+ .platform_data = &jbt6k74_pdata, -+ /* controller_data */ -+ /* irq */ -+ .max_speed_hz = 10 * 1000 * 1000, -+ .bus_num = 2, -+ /* chip_select */ -+ }, -+}; -+ -+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int csidx, int cs) -+{ -+ switch (cs) { -+ case BITBANG_CS_ACTIVE: -+ s3c2410_gpio_setpin(S3C2410_GPG3, 0); -+ break; -+ case BITBANG_CS_INACTIVE: -+ s3c2410_gpio_setpin(S3C2410_GPG3, 1); -+ break; -+ } -+} -+ -+static struct s3c2410_spigpio_info spi_gpio_cfg = { -+ .pin_clk = S3C2410_GPG7, -+ .pin_mosi = S3C2410_GPG6, -+ .pin_miso = S3C2410_GPG5, -+ .board_size = ARRAY_SIZE(glofiish_spi_board_info), -+ .board_info = glofiish_spi_board_info, -+ .chip_select = &spi_gpio_cs, -+ .num_chipselect = 2, /*** Should be 1 or 2 for gta01? ***/ -+}; -+ -+static struct resource s3c_spi_lcm_resource[] = { -+ [0] = { -+ .start = S3C2410_GPG3, -+ .end = S3C2410_GPG3, -+ }, -+ [1] = { -+ .start = S3C2410_GPG5, -+ .end = S3C2410_GPG5, -+ }, -+ [2] = { -+ .start = S3C2410_GPG6, -+ .end = S3C2410_GPG6, -+ }, -+ [3] = { -+ .start = S3C2410_GPG7, -+ .end = S3C2410_GPG7, -+ }, -+}; -+ -+struct platform_device s3c_device_spi_lcm = { -+ .name = "spi_s3c24xx_gpio", -+ .id = 1, -+ .num_resources = ARRAY_SIZE(s3c_spi_lcm_resource), -+ .resource = s3c_spi_lcm_resource, -+ .dev = { -+ .platform_data = &spi_gpio_cfg, -+ }, -+}; -+ -+static struct gta01bl_machinfo backlight_machinfo = { -+ .default_intensity = 1, -+ .max_intensity = 1, -+ .limit_mask = 1, -+ .defer_resume_backlight = 1, -+}; -+ -+static struct resource gta01_bl_resources[] = { -+ [0] = { -+ .start = M800_GPIO_BACKLIGHT, -+ .end = M800_GPIO_BACKLIGHT, -+ }, -+}; -+ -+struct platform_device gta01_bl_dev = { -+ .name = "gta01-bl", -+ .num_resources = ARRAY_SIZE(gta01_bl_resources), -+ .resource = gta01_bl_resources, -+ .dev = { -+ .platform_data = &backlight_machinfo, -+ }, -+}; -+ -+ -+#if 0 /* currently this is not used and we use gpio spi */ -+static struct glamo_spi_info glamo_spi_cfg = { -+ .board_size = ARRAY_SIZE(gta02_spi_board_info), -+ .board_info = gta02_spi_board_info, -+}; -+#endif /* 0 */ -+ -+#if 0 -+static struct resource gta02_vibrator_resources[] = { -+ [0] = { -+ .start = GTA02_GPIO_VIBRATOR_ON, -+ .end = GTA02_GPIO_VIBRATOR_ON, -+ }, -+}; -+ -+static struct platform_device gta02_vibrator_dev = { -+ .name = "neo1973-vibrator", -+ .num_resources = ARRAY_SIZE(gta02_vibrator_resources), -+ .resource = gta02_vibrator_resources, -+}; -+ -+static struct resource gta02_led_resources[] = { -+ { -+ .name = "gta02-power:orange", -+ .start = GTA02_GPIO_PWR_LED1, -+ .end = GTA02_GPIO_PWR_LED1, -+ }, { -+ .name = "gta02-power:blue", -+ .start = GTA02_GPIO_PWR_LED2, -+ .end = GTA02_GPIO_PWR_LED2, -+ }, { -+ .name = "gta02-aux:red", -+ .start = GTA02_GPIO_AUX_LED, -+ .end = GTA02_GPIO_AUX_LED, -+ }, -+}; -+ -+struct platform_device gta02_led_dev = { -+ .name = "gta02-led", -+ .num_resources = ARRAY_SIZE(gta02_led_resources), -+ .resource = gta02_led_resources, -+}; -+ -+static struct resource gta02_button_resources[] = { -+ [0] = { -+ .start = GTA02_GPIO_AUX_KEY, -+ .end = GTA02_GPIO_AUX_KEY, -+ }, -+ [1] = { -+ .start = GTA02_GPIO_HOLD_KEY, -+ .end = GTA02_GPIO_HOLD_KEY, -+ }, -+ [2] = { -+ .start = GTA02_GPIO_JACK_INSERT, -+ .end = GTA02_GPIO_JACK_INSERT, -+ }, -+}; -+ -+static struct platform_device gta02_button_dev = { -+ .name = "neo1973-button", -+ .num_resources = ARRAY_SIZE(gta02_button_resources), -+ .resource = gta02_button_resources, -+}; -+#endif -+ -+/* USB */ -+static struct s3c2410_hcd_info glofiish_usb_info = { -+ .port[0] = { -+ .flags = S3C_HCDFLG_USED, -+ }, -+ .port[1] = { -+ .flags = 0, -+ }, -+}; -+ -+static struct resource m800_button_resources[] = { -+ [0] = { -+ .start = M800_GPIO_nKEY_POWER, -+ .end = M800_GPIO_nKEY_POWER, -+ }, -+ [1] = { -+ .start = M800_GPIO_nKEY_CAMERA, -+ .end = M800_GPIO_nKEY_CAMERA, -+ }, -+ [3] = { -+ .start = M800_GPIO_nKEY_RECORD, -+ .end = M800_GPIO_nKEY_RECORD, -+ }, -+ [2] = { -+ .start = M800_GPIO_SLIDE, -+ .end = M800_GPIO_SLIDE, -+ }, -+}; -+ -+static struct platform_device m800_button_dev = { -+ .name = "m800-button", -+ .num_resources = ARRAY_SIZE(m800_button_resources), -+ .resource = m800_button_resources, -+}; -+ -+static struct platform_device m800_pm_bt_dev = { -+ .name = "neo1973-pm-bt", -+}; -+ -+static void __init glofiish_map_io(void) -+{ -+ s3c24xx_init_io(m800_iodesc, ARRAY_SIZE(m800_iodesc)); -+ s3c24xx_init_clocks(16934400); -+ s3c24xx_init_uarts(m800_uartcfgs, ARRAY_SIZE(m800_uartcfgs)); -+} -+ -+static irqreturn_t gta02_modem_irq(int irq, void *param) -+{ -+ printk(KERN_DEBUG "modem wakeup interrupt\n"); -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t ar6000_wow_irq(int irq, void *param) -+{ -+ printk(KERN_DEBUG "ar6000_wow interrupt\n"); -+ return IRQ_HANDLED; -+} -+ -+/* -+ * hardware_ecc=1|0 -+ */ -+static char hardware_ecc_str[4] __initdata = ""; -+ -+static int __init hardware_ecc_setup(char *str) -+{ -+ if (str) -+ strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str)); -+ return 1; -+} -+ -+__setup("hardware_ecc=", hardware_ecc_setup); -+ -+static void __init glofiish_machine_init(void) -+{ -+ int rc; -+ -+ /* set the panic callback to make AUX blink fast */ -+ panic_blink = glofiish_panic_blink; -+ -+ /* do not force soft ecc if we are asked to use hardware_ecc */ -+ if (hardware_ecc_str[0] == '1') -+ glofiish_nand_info.software_ecc = 0; -+ -+ s3c_device_usb.dev.platform_data = &glofiish_usb_info; -+ s3c_device_nand.dev.platform_data = &glofiish_nand_info; -+ s3c_device_sdi.dev.platform_data = &glofiish_mmc_cfg; -+ -+ s3c24xx_fb_set_platdata(&glofiish_lcd_cfg); -+ s3c24xx_udc_set_platdata(&glofiish_udc_cfg); -+ set_s3c2410ts_info(&glofiish_ts_cfg); -+ -+ platform_device_register(>a01_bl_dev); -+ platform_device_register(&m800_pm_bt_dev); -+ platform_device_register(&m800_button_dev); -+ platform_device_register(&s3c_device_spi_lcm); -+ -+ platform_add_devices(glofiish_devices, ARRAY_SIZE(glofiish_devices)); -+ -+ s3c2410_pm_init(); -+} -+ -+MACHINE_START(M800, "Glofiish M800") -+ .phys_io = S3C2410_PA_UART, -+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, -+ .boot_params = S3C2410_SDRAM_PA + 0x100, -+ .map_io = glofiish_map_io, -+ .init_irq = s3c24xx_init_irq, -+ .init_machine = glofiish_machine_init, -+ .timer = &s3c24xx_timer, -+MACHINE_END -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/mach-gta02.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/mach-gta02.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,1656 @@ -+/* -+ * linux/arch/arm/mach-s3c2440/mach-gta02.c -+ * -+ * S3C2440 Machine Support for the FIC GTA02 (Neo1973) -+ * -+ * Copyright (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+#include -+#include "fiq_c_isr.h" -+#include -+#include -+ -+#include "../plat-s3c24xx/neo1973_pm_gps.h" -+ -+/* arbitrates which sensor IRQ owns the shared SPI bus */ -+static spinlock_t motion_irq_lock; -+ -+/* the dependency of jbt / LCM on pcf50633 resume */ -+struct resume_dependency resume_dep_jbt_pcf; -+/* the dependency of jbt / LCM on glamo resume */ -+struct resume_dependency resume_dep_jbt_glamo; -+/* the dependency of Glamo MCI on pcf50633 resume (has to power SD slot) */ -+struct resume_dependency resume_dep_glamo_mci_pcf; -+ -+ -+static int gta02_charger_online_status; -+static int gta02_charger_active_status; -+ -+/* define FIQ IPC struct */ -+/* -+ * contains stuff FIQ ISR modifies and normal kernel code can see and use -+ * this is defined in , you should customize -+ * the definition in there and include the same definition in your kernel -+ * module that wants to interoperate with your FIQ code. -+ */ -+struct fiq_ipc fiq_ipc; -+EXPORT_SYMBOL(fiq_ipc); -+ -+#define DIVISOR_FROM_US(x) ((x) << 1) -+ -+#define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100) -+ -+#ifdef CONFIG_GTA02_HDQ -+/* HDQ specific */ -+#define HDQ_SAMPLE_PERIOD_US 20 -+/* private HDQ FSM state -- all other info interesting for caller in fiq_ipc */ -+static enum hdq_bitbang_states hdq_state; -+static u8 hdq_ctr; -+static u8 hdq_ctr2; -+static u8 hdq_bit; -+static u8 hdq_shifter; -+static u8 hdq_tx_data_done; -+ -+#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US) -+#endif -+/* define FIQ ISR */ -+ -+FIQ_HANDLER_START() -+/* define your locals here -- no initializers though */ -+ u16 divisor; -+FIQ_HANDLER_ENTRY(256, 512) -+/* Your ISR here :-) */ -+ divisor = 0xffff; -+ -+ /* Vibrator servicing */ -+ -+ if (fiq_ipc.vib_pwm_latched || fiq_ipc.vib_pwm) { /* not idle */ -+ if (((u8)_fiq_count_fiqs) == fiq_ipc.vib_pwm_latched) -+ neo1973_gpb_setpin(fiq_ipc.vib_gpio_pin, 0); -+ if (((u8)_fiq_count_fiqs) == 0) { -+ fiq_ipc.vib_pwm_latched = fiq_ipc.vib_pwm; -+ if (fiq_ipc.vib_pwm_latched) -+ neo1973_gpb_setpin(fiq_ipc.vib_gpio_pin, 1); -+ } -+ divisor = FIQ_DIVISOR_VIBRATOR; -+ } -+ -+#ifdef CONFIG_GTA02_HDQ -+ /* HDQ servicing */ -+ -+ switch (hdq_state) { -+ case HDQB_IDLE: -+ if (fiq_ipc.hdq_request_ctr == fiq_ipc.hdq_transaction_ctr) -+ break; -+ hdq_ctr = 210 / HDQ_SAMPLE_PERIOD_US; -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 0); -+ s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_OUTPUT); -+ hdq_tx_data_done = 0; -+ hdq_state = HDQB_TX_BREAK; -+ break; -+ -+ case HDQB_TX_BREAK: /* issue low for > 190us */ -+ if (--hdq_ctr == 0) { -+ hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_TX_BREAK_RECOVERY; -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1); -+ } -+ break; -+ -+ case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */ -+ if (--hdq_ctr) -+ break; -+ hdq_shifter = fiq_ipc.hdq_ads; -+ hdq_bit = 8; /* 8 bits of ads / rw */ -+ hdq_tx_data_done = 0; /* doing ads */ -+ /* fallthru on last one */ -+ case HDQB_ADS_CALC: -+ if (hdq_shifter & 1) -+ hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US; -+ else -+ hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US; -+ /* carefully precompute the other phase length */ -+ hdq_ctr2 = (210 - (hdq_ctr * HDQ_SAMPLE_PERIOD_US)) / -+ HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_ADS_LOW; -+ hdq_shifter >>= 1; -+ hdq_bit--; -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 0); -+ break; -+ -+ case HDQB_ADS_LOW: -+ if (--hdq_ctr) -+ break; -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1); -+ hdq_state = HDQB_ADS_HIGH; -+ break; -+ -+ case HDQB_ADS_HIGH: -+ if (--hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */ -+ break; -+ if (hdq_bit) { /* more bits to do */ -+ hdq_state = HDQB_ADS_CALC; -+ break; -+ } -+ /* no more bits, wait it out until hdq_ctr2 exhausted */ -+ if (hdq_ctr2) -+ break; -+ /* ok no more bits and very last state */ -+ hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US; -+ /* FIXME 0 = read */ -+ if (fiq_ipc.hdq_ads & 0x80) { /* write the byte out */ -+ /* set delay before payload */ -+ hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US; -+ /* already high, no need to write */ -+ hdq_state = HDQB_WAIT_TX; -+ break; -+ } -+ /* read the next byte */ -+ hdq_bit = 8; /* 8 bits of data */ -+ hdq_ctr = 3000 / HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_WAIT_RX; -+ s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_INPUT); -+ break; -+ -+ case HDQB_WAIT_TX: /* issue low for > 40us */ -+ if (--hdq_ctr) -+ break; -+ if (!hdq_tx_data_done) { /* was that the data sent? */ -+ hdq_tx_data_done++; -+ hdq_shifter = fiq_ipc.hdq_tx_data; -+ hdq_bit = 8; /* 8 bits of data */ -+ hdq_state = HDQB_ADS_CALC; /* start sending */ -+ break; -+ } -+ fiq_ipc.hdq_error = 0; -+ fiq_ipc.hdq_transaction_ctr++; -+ hdq_state = HDQB_IDLE; /* all tx is done */ -+ /* idle in input mode, it's pulled up by 10K */ -+ s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_INPUT); -+ break; -+ -+ case HDQB_WAIT_RX: /* wait for battery to talk to us */ -+ if (s3c2410_gpio_getpin(fiq_ipc.hdq_gpio_pin) == 0) { -+ /* it talks to us! */ -+ hdq_ctr2 = 1; -+ hdq_bit = 8; /* 8 bits of data */ -+ /* timeout */ -+ hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_DATA_RX_LOW; -+ break; -+ } -+ if (--hdq_ctr == 0) { /* timed out, error */ -+ fiq_ipc.hdq_error = 1; -+ fiq_ipc.hdq_transaction_ctr++; -+ hdq_state = HDQB_IDLE; /* abort */ -+ } -+ break; -+ -+ /* -+ * HDQ basically works by measuring the low time of the bit cell -+ * 32-50us --> '1', 80 - 145us --> '0' -+ */ -+ -+ case HDQB_DATA_RX_LOW: -+ if (s3c2410_gpio_getpin(fiq_ipc.hdq_gpio_pin)) { -+ fiq_ipc.hdq_rx_data >>= 1; -+ if (hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US)) -+ fiq_ipc.hdq_rx_data |= 0x80; -+ -+ if (--hdq_bit == 0) { -+ fiq_ipc.hdq_error = 0; -+ fiq_ipc.hdq_transaction_ctr++; /* done */ -+ hdq_state = HDQB_IDLE; -+ } else -+ hdq_state = HDQB_DATA_RX_HIGH; -+ /* timeout */ -+ hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US; -+ hdq_ctr2 = 1; -+ break; -+ } -+ hdq_ctr2++; -+ if (--hdq_ctr) -+ break; -+ /* timed out, error */ -+ fiq_ipc.hdq_error = 2; -+ fiq_ipc.hdq_transaction_ctr++; -+ hdq_state = HDQB_IDLE; /* abort */ -+ break; -+ -+ case HDQB_DATA_RX_HIGH: -+ if (!s3c2410_gpio_getpin(fiq_ipc.hdq_gpio_pin)) { -+ /* it talks to us! */ -+ hdq_ctr2 = 1; -+ /* timeout */ -+ hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_DATA_RX_LOW; -+ break; -+ } -+ if (--hdq_ctr) -+ break; -+ /* timed out, error */ -+ fiq_ipc.hdq_error = 3; -+ fiq_ipc.hdq_transaction_ctr++; -+ /* we're in input mode already */ -+ hdq_state = HDQB_IDLE; /* abort */ -+ break; -+ } -+ -+ if (hdq_state != HDQB_IDLE) /* ie, not idle */ -+ if (divisor > FIQ_DIVISOR_HDQ) -+ divisor = FIQ_DIVISOR_HDQ; /* keep us going */ -+#endif -+ -+ /* disable further timer interrupts if nobody has any work -+ * or adjust rate according to who still has work -+ * -+ * CAUTION: it means forground code must disable FIQ around -+ * its own non-atomic S3C2410_INTMSK changes... not common -+ * thankfully and taken care of by the fiq-basis patch -+ */ -+ if (divisor == 0xffff) /* mask the fiq irq source */ -+ __raw_writel(__raw_readl(S3C2410_INTMSK) | _fiq_ack_mask, -+ S3C2410_INTMSK); -+ else /* still working, maybe at a different rate */ -+ __raw_writel(divisor, S3C2410_TCNTB(_fiq_timer_index)); -+ _fiq_timer_divisor = divisor; -+ -+FIQ_HANDLER_END() -+ -+ -+/* -+ * this gets called every 1ms when we paniced. -+ */ -+ -+static long gta02_panic_blink(long count) -+{ -+ long delay = 0; -+ static long last_blink; -+ static char led; -+ -+ if (count - last_blink < 100) /* 200ms period, fast blink */ -+ return 0; -+ -+ led ^= 1; -+ s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT); -+ neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, led); -+ -+ last_blink = count; -+ return delay; -+} -+ -+ -+/** -+ * returns PCB revision information in b9,b8 and b2,b1,b0 -+ * Pre-GTA02 A6 returns 0x000 -+ * GTA02 A6 returns 0x101 -+ * ... -+ */ -+ -+int gta02_get_pcb_revision(void) -+{ -+ int n; -+ int u = 0; -+ static unsigned long pinlist[] = { -+ GTA02_PCB_ID1_0, -+ GTA02_PCB_ID1_1, -+ GTA02_PCB_ID1_2, -+ GTA02_PCB_ID2_0, -+ GTA02_PCB_ID2_1, -+ }; -+ static int pin_offset[] = { -+ 0, 1, 2, 8, 9 -+ }; -+ -+ for (n = 0 ; n < ARRAY_SIZE(pinlist); n++) { -+ /* -+ * set the PCB version GPIO to be pulled-down input -+ * force low briefly first -+ */ -+ s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_setpin(pinlist[n], 0); -+ /* misnomer: it is a pullDOWN in 2442 */ -+ s3c2410_gpio_pullup(pinlist[n], 1); -+ s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_INPUT); -+ -+ udelay(10); -+ -+ if (s3c2410_gpio_getpin(pinlist[n])) -+ u |= 1 << pin_offset[n]; -+ -+ /* -+ * when not being interrogated, all of the revision GPIO -+ * are set to output HIGH without pulldown so no current flows -+ * if they are NC or pulled up. -+ */ -+ s3c2410_gpio_setpin(pinlist[n], 1); -+ s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT); -+ /* misnomer: it is a pullDOWN in 2442 */ -+ s3c2410_gpio_pullup(pinlist[n], 0); -+ } -+ -+ return u; -+} -+ -+struct platform_device gta02_version_device = { -+ .name = "neo1973-version", -+ .num_resources = 0, -+}; -+ -+struct platform_device gta02_resume_reason_device = { -+ .name = "neo1973-resume", -+ .num_resources = 0, -+}; -+ -+struct platform_device gta02_memconfig_device = { -+ .name = "neo1973-memconfig", -+ .num_resources = 0, -+}; -+ -+static struct map_desc gta02_iodesc[] __initdata = { -+ { -+ .virtual = 0xe0000000, -+ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000), -+ .length = SZ_1M, -+ .type = MT_DEVICE -+ }, -+}; -+ -+#define UCON S3C2410_UCON_DEFAULT -+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -+ -+static struct s3c2410_uartcfg gta02_uartcfgs[] = { -+ [0] = { -+ .hwport = 0, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+ [1] = { -+ .hwport = 1, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+ [2] = { -+ .hwport = 2, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+ -+}; -+ -+/* BQ27000 Battery */ -+ -+static int gta02_get_charger_online_status(void) -+{ -+ return gta02_charger_online_status; -+} -+ -+static int gta02_get_charger_active_status(void) -+{ -+ return gta02_charger_active_status; -+} -+ -+ -+struct bq27000_platform_data bq27000_pdata = { -+ .name = "bat", -+ .rsense_mohms = 20, -+ .hdq_read = gta02hdq_read, -+ .hdq_write = gta02hdq_write, -+ .hdq_initialized = gta02hdq_initialized, -+ .get_charger_online_status = gta02_get_charger_online_status, -+ .get_charger_active_status = gta02_get_charger_active_status -+}; -+ -+struct platform_device bq27000_battery_device = { -+ .name = "bq27000-battery", -+ .dev = { -+ .platform_data = &bq27000_pdata, -+ }, -+}; -+ -+ -+/* PMU driver info */ -+ -+static int pmu_callback(struct device *dev, unsigned int feature, -+ enum pmu_event event) -+{ -+ switch (feature) { -+ case PCF50633_FEAT_MBC: -+ switch (event) { -+ case PMU_EVT_CHARGER_IDLE: -+ gta02_charger_active_status = 0; -+ break; -+ case PMU_EVT_CHARGER_ACTIVE: -+ gta02_charger_active_status = 1; -+ break; -+ case PMU_EVT_USB_INSERT: -+ gta02_charger_online_status = 1; -+ break; -+ case PMU_EVT_USB_REMOVE: -+ gta02_charger_online_status = 0; -+ break; -+ case PMU_EVT_INSERT: /* adapter is unsused */ -+ case PMU_EVT_REMOVE: /* adapter is unused */ -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ bq27000_charging_state_change(&bq27000_battery_device); -+ return 0; -+} -+ -+static struct platform_device gta01_pm_gps_dev = { -+ .name = "neo1973-pm-gps", -+}; -+ -+static struct platform_device gta01_pm_bt_dev = { -+ .name = "neo1973-pm-bt", -+}; -+ -+/* this is called when pc50633 is probed, unfortunately quite late in the -+ * day since it is an I2C bus device. Here we can belatedly define some -+ * platform devices with the advantage that we can mark the pcf50633 as the -+ * parent. This makes them get suspended and resumed with their parent -+ * the pcf50633 still around. -+ */ -+ -+static void gta02_pcf50633_attach_child_devices(struct device *parent_device) -+{ -+ gta01_pm_gps_dev.dev.parent = parent_device; -+ gta01_pm_bt_dev.dev.parent = parent_device; -+ platform_device_register(>a01_pm_bt_dev); -+ platform_device_register(>a01_pm_gps_dev); -+} -+ -+static struct pcf50633_platform_data gta02_pcf_pdata = { -+ .used_features = PCF50633_FEAT_MBC | -+ PCF50633_FEAT_BBC | -+ PCF50633_FEAT_RTC | -+ PCF50633_FEAT_CHGCUR | -+ PCF50633_FEAT_BATVOLT | -+ PCF50633_FEAT_BATTEMP | -+ PCF50633_FEAT_PWM_BL, -+ .onkey_seconds_sig_init = 4, -+ .onkey_seconds_shutdown = 8, -+ .cb = &pmu_callback, -+ .r_fix_batt = 10000, -+ .r_fix_batt_par = 10000, -+ .r_sense_milli = 220, -+ .flag_use_apm_emulation = 0, -+ .resumers = { -+ [0] = PCF50633_INT1_USBINS | -+ PCF50633_INT1_USBREM | -+ PCF50633_INT1_ALARM, -+ [1] = PCF50633_INT2_ONKEYF, -+ [2] = PCF50633_INT3_ONKEY1S -+ }, -+ /* warning: these get rewritten during machine init below -+ * depending on pcb variant -+ */ -+ .rails = { -+ [PCF50633_REGULATOR_AUTO] = { -+ .name = "io_3v3", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50633_REGULATOR_DOWN1] = { -+ .name = "core_1v3", -+ /* Wow, when we are going into suspend, after pcf50633 -+ * runs its suspend (which happens real early since it -+ * is an i2c device) we are running out of the 22uF cap -+ * on core_1v3 rail !!!! -+ */ -+ .voltage = { -+ .init = 1300, -+ .max = 1600, -+ }, -+ }, -+ [PCF50633_REGULATOR_DOWN2] = { -+ .name = "core_1v8", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 1800, -+ .max = 1800, -+ }, -+ }, -+ [PCF50633_REGULATOR_HCLDO] = { -+ .name = "sd_3v3", -+ .voltage = { -+ .init = 2000, -+ .max = 3300, -+ }, -+ }, -+ [PCF50633_REGULATOR_LDO1] = { -+ .name = "gsensor_3v3", -+ .voltage = { -+ .init = 1300, -+ .max = 1330, -+ }, -+ }, -+ [PCF50633_REGULATOR_LDO2] = { -+ .name = "codec_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50633_REGULATOR_LDO3] = { -+ .name = "unused3", -+ .voltage = { -+ .init = 3000, -+ .max = 3000, -+ }, -+ }, -+ [PCF50633_REGULATOR_LDO4] = { -+ .name = "bt_3v2", -+ .voltage = { -+ .init = 2500, -+ .max = 3300, -+ }, -+ }, -+ [PCF50633_REGULATOR_LDO5] = { -+ .name = "rf3v", -+ .voltage = { -+ .init = 1500, -+ .max = 1500, -+ }, -+ }, -+ [PCF50633_REGULATOR_LDO6] = { -+ .name = "lcm_3v", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 0, -+ .max = 3300, -+ }, -+ }, -+ [PCF50633_REGULATOR_MEMLDO] = { -+ .name = "memldo", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 1800, -+ .max = 1800, -+ }, -+ }, -+ }, -+ .defer_resume_backlight = 1, -+ .resume_backlight_ramp_speed = 5, -+ .attach_child_devices = gta02_pcf50633_attach_child_devices -+ -+}; -+ -+#if 0 /* currently unused */ -+static void cfg_pmu_vrail(struct pmu_voltage_rail *vrail, char *name, -+ unsigned int flags, unsigned int init, -+ unsigned int max) -+{ -+ vrail->name = name; -+ vrail->flags = flags; -+ vrail->voltage.init = init; -+ vrail->voltage.max = max; -+} -+#endif -+ -+static void mangle_pmu_pdata_by_system_rev(void) -+{ -+ switch (system_rev) { -+ case GTA02v1_SYSTEM_REV: -+ /* FIXME: this is only in v1 due to wrong PMU variant */ -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_DOWN2].flags = -+ PMU_VRAIL_F_SUSPEND_ON; -+ break; -+ case GTA02v2_SYSTEM_REV: -+ case GTA02v3_SYSTEM_REV: -+ case GTA02v4_SYSTEM_REV: -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ /* we need to keep the 1.8V going since this is the SDRAM -+ * self-refresh voltage */ -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_DOWN2].flags = -+ PMU_VRAIL_F_SUSPEND_ON; -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_DOWN2].name = -+ "io_1v8", -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO1].name = -+ "gsensor_3v3", -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO1].voltage.init = -+ 3300; -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO1].voltage.max = -+ 3300; -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO1].flags &= -+ ~PMU_VRAIL_F_SUSPEND_ON; -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO3].flags = -+ PMU_VRAIL_F_UNUSED; -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO5] = ((struct pmu_voltage_rail) { -+ .name = "rf_3v", -+ .voltage = { -+ .init = 0, -+ .max = 3000, -+ } -+ }); -+ gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO6] = -+ ((struct pmu_voltage_rail) { -+ .name = "lcm_3v", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 3000, -+ .max = 3000, -+ } -+ }); -+ break; -+ default: -+ break; -+ } -+} -+ -+static struct resource gta02_pmu_resources[] = { -+ [0] = { -+ .flags = IORESOURCE_IRQ, -+ .start = GTA02_IRQ_PCF50633, -+ .end = GTA02_IRQ_PCF50633, -+ }, -+}; -+ -+struct platform_device gta02_pmu_dev = { -+ .name = "pcf50633", -+ .num_resources = ARRAY_SIZE(gta02_pmu_resources), -+ .resource = gta02_pmu_resources, -+ .dev = { -+ .platform_data = >a02_pcf_pdata, -+ }, -+}; -+ -+/* FIQ */ -+ -+static struct resource sc32440_fiq_resources[] = { -+ [0] = { -+ .flags = IORESOURCE_IRQ, -+ .start = IRQ_TIMER3, -+ .end = IRQ_TIMER3, -+ }, -+}; -+ -+struct platform_device sc32440_fiq_device = { -+ .name = "sc32440_fiq", -+ .num_resources = 1, -+ .resource = sc32440_fiq_resources, -+}; -+ -+#ifdef CONFIG_GTA02_HDQ -+/* HDQ */ -+ -+static struct resource gta02_hdq_resources[] = { -+ [0] = { -+ .start = GTA02v5_GPIO_HDQ, -+ .end = GTA02v5_GPIO_HDQ, -+ }, -+}; -+ -+struct platform_device gta02_hdq_device = { -+ .name = "gta02-hdq", -+ .num_resources = 1, -+ .resource = gta02_hdq_resources, -+}; -+#endif -+ -+ -+/* NOR Flash */ -+ -+#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */ -+#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */ -+ -+static struct physmap_flash_data gta02_nor_flash_data = { -+ .width = 2, -+}; -+ -+static struct resource gta02_nor_flash_resource = { -+ .start = GTA02_FLASH_BASE, -+ .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device gta02_nor_flash = { -+ .name = "physmap-flash", -+ .id = 0, -+ .dev = { -+ .platform_data = >a02_nor_flash_data, -+ }, -+ .resource = >a02_nor_flash_resource, -+ .num_resources = 1, -+}; -+ -+ -+ -+static struct resource gta02_sdio_resources[] = { -+ [0] = { -+ .flags = IORESOURCE_IRQ, -+ .start = IRQ_SDI, -+ .end = IRQ_SDI, -+ }, -+ [1] = { -+ .flags = IORESOURCE_MEM, -+ .start = S3C2410_PA_SDI, -+ .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1, -+ }, -+ [2] = { -+ .flags = IORESOURCE_DMA, -+ .start = 0, /* Channel 0 for SDI */ -+ .end = 0, -+ }, -+}; -+ -+ -+static struct platform_device gta02_sdio_dev = { -+ .name = "s3c24xx-sdio", -+ .id = -1, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .resource = gta02_sdio_resources, -+ .num_resources = ARRAY_SIZE(gta02_sdio_resources), -+}; -+ -+struct platform_device s3c24xx_pwm_device = { -+ .name = "s3c24xx_pwm", -+ .num_resources = 0, -+}; -+ -+ -+static struct platform_device *gta02_devices[] __initdata = { -+ &s3c_device_usb, -+ &s3c_device_wdt, -+ &s3c_device_i2c, -+ &s3c_device_iis, -+ // &s3c_device_sdi, /* FIXME: temporary disable to avoid s3cmci bind */ -+ &s3c_device_usbgadget, -+ &s3c_device_nand, -+ &s3c_device_ts, -+ >a02_nor_flash, -+ &sc32440_fiq_device, -+ >a02_version_device, -+ >a02_memconfig_device, -+ >a02_resume_reason_device, -+ &s3c24xx_pwm_device, -+ -+}; -+ -+static struct s3c2410_nand_set gta02_nand_sets[] = { -+ [0] = { -+ .name = "neo1973-nand", -+ .nr_chips = 1, -+ .flags = S3C2410_NAND_BBT, -+ }, -+}; -+ -+/* choose a set of timings derived from S3C@2442B MCP54 -+ * data sheet (K5D2G13ACM-D075 MCP Memory) -+ */ -+ -+static struct s3c2410_platform_nand gta02_nand_info = { -+ .tacls = 0, -+ .twrph0 = 25, -+ .twrph1 = 15, -+ .nr_sets = ARRAY_SIZE(gta02_nand_sets), -+ .sets = gta02_nand_sets, -+ .software_ecc = 1, -+}; -+ -+static struct s3c24xx_mci_pdata gta02_mmc_cfg = { -+ .gpio_detect = GTA02v1_GPIO_nSD_DETECT, -+ .set_power = NULL, -+ .ocr_avail = MMC_VDD_32_33, -+}; -+ -+static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd) -+{ -+ printk(KERN_DEBUG "%s(%d)\n", __func__, cmd); -+ -+ switch (cmd) { -+ case S3C2410_UDC_P_ENABLE: -+ neo1973_gpb_setpin(GTA02_GPIO_USB_PULLUP, 1); -+ break; -+ case S3C2410_UDC_P_DISABLE: -+ neo1973_gpb_setpin(GTA02_GPIO_USB_PULLUP, 0); -+ break; -+ case S3C2410_UDC_P_RESET: -+ /* FIXME! */ -+ break; -+ default: -+ break; -+ } -+} -+ -+/* get PMU to set USB current limit accordingly */ -+ -+static void gta02_udc_vbus_draw(unsigned int ma) -+{ -+ if (!pcf50633_global) -+ return; -+ -+ pcf50633_notify_usb_current_limit_change(pcf50633_global, ma); -+} -+ -+static struct s3c2410_udc_mach_info gta02_udc_cfg = { -+ .vbus_draw = gta02_udc_vbus_draw, -+ .udc_command = gta02_udc_command, -+ -+}; -+ -+static struct s3c2410_ts_mach_info gta02_ts_cfg = { -+ .delay = 10000, -+ .presc = 50000000 / 1000000, /* 50 MHz PCLK / 1MHz */ -+ /* simple averaging, 2^n samples */ -+ .oversampling_shift = 5, -+ /* averaging filter length, 2^n */ -+ .excursion_filter_len_bits = 5, -+ /* flagged for beauty contest on next sample if differs from -+ * average more than this -+ */ -+ .reject_threshold_vs_avg = 2, -+}; -+ -+ -+/* SPI: LCM control interface attached to Glamo3362 */ -+ -+static void gta02_jbt6k74_reset(int devidx, int level) -+{ -+ glamo_lcm_reset(level); -+} -+ -+/* finally bring up deferred backlight resume now LCM is resumed itself */ -+ -+static void gta02_jbt6k74_resuming(int devidx) -+{ -+ pcf50633_backlight_resume(pcf50633_global); -+} -+ -+static int gta02_jbt6k74_all_dependencies_resumed(int devidx) -+{ -+ if (!resume_dep_jbt_pcf.called_flag) -+ return 0; -+ -+ if (!resume_dep_jbt_glamo.called_flag) -+ return 0; -+ -+ return 1; -+} -+ -+/* register jbt resume action to be dependent on pcf50633 and glamo resume */ -+ -+static void gta02_jbt6k74_suspending(int devindex, struct spi_device *spi) -+{ -+ void jbt6k74_resume(void *spi); /* little white lies about types */ -+ -+ resume_dep_jbt_pcf.callback = jbt6k74_resume; -+ resume_dep_jbt_pcf.context = (void *)spi; -+ pcf50633_register_resume_dependency(pcf50633_global, -+ &resume_dep_jbt_pcf); -+ resume_dep_jbt_glamo.callback = jbt6k74_resume; -+ resume_dep_jbt_glamo.context = (void *)spi; -+ glamo_register_resume_dependency(&resume_dep_jbt_glamo); -+} -+ -+ -+const struct jbt6k74_platform_data jbt6k74_pdata = { -+ .reset = gta02_jbt6k74_reset, -+ .resuming = gta02_jbt6k74_resuming, -+ .suspending = gta02_jbt6k74_suspending, -+ .all_dependencies_resumed = gta02_jbt6k74_all_dependencies_resumed, -+}; -+ -+static struct spi_board_info gta02_spi_board_info[] = { -+ { -+ .modalias = "jbt6k74", -+ /* platform_data */ -+ .platform_data = &jbt6k74_pdata, -+ /* controller_data */ -+ /* irq */ -+ .max_speed_hz = 10 * 1000 * 1000, -+ .bus_num = 2, -+ /* chip_select */ -+ }, -+}; -+ -+#if 0 /* currently this is not used and we use gpio spi */ -+static struct glamo_spi_info glamo_spi_cfg = { -+ .board_size = ARRAY_SIZE(gta02_spi_board_info), -+ .board_info = gta02_spi_board_info, -+}; -+#endif /* 0 */ -+ -+static struct glamo_spigpio_info glamo_spigpio_cfg = { -+ .pin_clk = GLAMO_GPIO10_OUTPUT, -+ .pin_mosi = GLAMO_GPIO11_OUTPUT, -+ .pin_cs = GLAMO_GPIO12_OUTPUT, -+ .pin_miso = 0, -+ .board_size = ARRAY_SIZE(gta02_spi_board_info), -+ .board_info = gta02_spi_board_info, -+}; -+ -+static struct resource gta02_vibrator_resources[] = { -+ [0] = { -+ .start = GTA02_GPIO_VIBRATOR_ON, -+ .end = GTA02_GPIO_VIBRATOR_ON, -+ }, -+}; -+ -+static struct platform_device gta02_vibrator_dev = { -+ .name = "neo1973-vibrator", -+ .num_resources = ARRAY_SIZE(gta02_vibrator_resources), -+ .resource = gta02_vibrator_resources, -+}; -+ -+/* SPI: Accelerometers attached to SPI of s3c244x */ -+ -+/* -+ * Situation is that Linux SPI can't work in an interrupt context, so we -+ * implement our own bitbang here. Arbitration is needed because not only -+ * can this interrupt happen at any time even if foreground wants to use -+ * the bitbang API from Linux, but multiple motion sensors can be on the -+ * same SPI bus, and multiple interrupts can happen. -+ * -+ * Foreground / interrupt arbitration is okay because the interrupts are -+ * disabled around all the foreground SPI code. -+ * -+ * Interrupt / Interrupt arbitration is evidently needed, otherwise we -+ * lose edge-triggered service after a while due to the two sensors sharing -+ * the SPI bus having irqs at the same time eventually. -+ * -+ * Servicing is typ 75 - 100us at 400MHz. -+ */ -+ -+/* #define DEBUG_SPEW_MS */ -+ -+struct lis302dl_platform_data lis302_pdata_top; -+struct lis302dl_platform_data lis302_pdata_bottom; -+ -+/* -+ * generic SPI RX and TX bitbang -+ * only call with interrupts off! -+ */ -+ -+static void gta02_lis302dl_bitbang(struct lis302dl_info *lis, u8 *tx, -+ int tx_bytes, u8 *rx, int rx_bytes) -+{ -+ struct lis302dl_platform_data *pdata = lis->pdata; -+ int n; -+ u8 shifter = 0; -+ unsigned long other_cs; -+ -+ /* -+ * Huh.. "quirk"... CS on this device is not really "CS" like you can -+ * expect. Instead when 1 it selects I2C interface mode. Because we -+ * have 2 devices on one interface, the "disabled" device when we talk -+ * to an "enabled" device sees the clocks as I2C clocks, creating -+ * havoc. -+ * -+ * I2C sees MOSI going LOW while CLK HIGH as a START action, we must -+ * ensure this is never issued. -+ */ -+ -+ if (&lis302_pdata_top == pdata) -+ other_cs = lis302_pdata_bottom.pin_chip_select; -+ else -+ other_cs = lis302_pdata_top.pin_chip_select; -+ -+ s3c2410_gpio_setpin(other_cs, 1); -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 1); -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 0); -+ -+ /* send the register index, r/w and autoinc bits */ -+ for (n = 0; n < (tx_bytes << 3); n++) { -+ if (!(n & 7)) -+ shifter = tx[n >> 3]; -+ s3c2410_gpio_setpin(pdata->pin_clk, 0); -+ s3c2410_gpio_setpin(pdata->pin_mosi, (shifter >> 7) & 1); -+ s3c2410_gpio_setpin(pdata->pin_clk, 0); -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ shifter <<= 1; -+ } -+ -+ for (n = 0; n < (rx_bytes << 3); n++) { /* 8 bits each */ -+ s3c2410_gpio_setpin(pdata->pin_clk, 0); -+ s3c2410_gpio_setpin(pdata->pin_clk, 0); -+ shifter <<= 1; -+ if (s3c2410_gpio_getpin(pdata->pin_miso)) -+ shifter |= 1; -+ if ((n & 7) == 7) -+ rx[n >> 3] = shifter; -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ } -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 1); -+ s3c2410_gpio_setpin(other_cs, 1); -+} -+ -+ -+static int gta02_lis302dl_bitbang_read_reg(struct lis302dl_info *lis, u8 reg) -+{ -+ u8 data = 0xc0 | reg; /* read, autoincrement */ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ gta02_lis302dl_bitbang(lis, &data, 1, &data, 1); -+ -+ local_irq_restore(flags); -+ -+ return data; -+} -+ -+static void gta02_lis302dl_bitbang_write_reg(struct lis302dl_info *lis, u8 reg, -+ u8 val) -+{ -+ u8 data[2] = { 0x00 | reg, val }; /* write, no autoincrement */ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ gta02_lis302dl_bitbang(lis, &data[0], 2, NULL, 0); -+ -+ local_irq_restore(flags); -+ -+} -+ -+ -+void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume) -+{ -+ struct lis302dl_platform_data *pdata = lis->pdata; -+ -+ if (!resume) { -+ /* -+ * we don't want to power them with a high level -+ * because GSENSOR_3V3 is not up during suspend -+ */ -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 0); -+ s3c2410_gpio_setpin(pdata->pin_clk, 0); -+ s3c2410_gpio_setpin(pdata->pin_mosi, 0); -+ /* misnomer: it is a pullDOWN in 2442 */ -+ s3c2410_gpio_pullup(pdata->pin_miso, 1); -+ return; -+ } -+ -+ /* back to normal */ -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 1); -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ /* misnomer: it is a pullDOWN in 2442 */ -+ s3c2410_gpio_pullup(pdata->pin_miso, 0); -+ -+ s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT); -+ -+} -+ -+ -+ -+struct lis302dl_platform_data lis302_pdata_top = { -+ .name = "lis302-1 (top)", -+ .pin_chip_select= S3C2410_GPD12, -+ .pin_clk = S3C2410_GPG7, -+ .pin_mosi = S3C2410_GPG6, -+ .pin_miso = S3C2410_GPG5, -+ .interrupt = GTA02_IRQ_GSENSOR_1, -+ .open_drain = 1, /* altered at runtime by PCB rev */ -+ .lis302dl_bitbang = gta02_lis302dl_bitbang, -+ .lis302dl_bitbang_reg_read = gta02_lis302dl_bitbang_read_reg, -+ .lis302dl_bitbang_reg_write = gta02_lis302dl_bitbang_write_reg, -+ .lis302dl_suspend_io = gta02_lis302dl_suspend_io, -+}; -+ -+struct lis302dl_platform_data lis302_pdata_bottom = { -+ .name = "lis302-2 (bottom)", -+ .pin_chip_select= S3C2410_GPD13, -+ .pin_clk = S3C2410_GPG7, -+ .pin_mosi = S3C2410_GPG6, -+ .pin_miso = S3C2410_GPG5, -+ .interrupt = GTA02_IRQ_GSENSOR_2, -+ .open_drain = 1, /* altered at runtime by PCB rev */ -+ .lis302dl_bitbang = gta02_lis302dl_bitbang, -+ .lis302dl_bitbang_reg_read = gta02_lis302dl_bitbang_read_reg, -+ .lis302dl_bitbang_reg_write = gta02_lis302dl_bitbang_write_reg, -+ .lis302dl_suspend_io = gta02_lis302dl_suspend_io, -+}; -+ -+ -+static struct platform_device s3c_device_spi_acc1 = { -+ .name = "lis302dl", -+ .id = 1, -+ .dev = { -+ .platform_data = &lis302_pdata_top, -+ }, -+}; -+ -+static struct platform_device s3c_device_spi_acc2 = { -+ .name = "lis302dl", -+ .id = 2, -+ .dev = { -+ .platform_data = &lis302_pdata_bottom, -+ }, -+}; -+ -+static struct resource gta02_led_resources[] = { -+ { -+ .name = "gta02-power:orange", -+ .start = GTA02_GPIO_PWR_LED1, -+ .end = GTA02_GPIO_PWR_LED1, -+ }, { -+ .name = "gta02-power:blue", -+ .start = GTA02_GPIO_PWR_LED2, -+ .end = GTA02_GPIO_PWR_LED2, -+ }, { -+ .name = "gta02-aux:red", -+ .start = GTA02_GPIO_AUX_LED, -+ .end = GTA02_GPIO_AUX_LED, -+ }, -+}; -+ -+struct platform_device gta02_led_dev = { -+ .name = "gta02-led", -+ .num_resources = ARRAY_SIZE(gta02_led_resources), -+ .resource = gta02_led_resources, -+}; -+ -+static struct resource gta02_button_resources[] = { -+ [0] = { -+ .start = GTA02_GPIO_AUX_KEY, -+ .end = GTA02_GPIO_AUX_KEY, -+ }, -+ [1] = { -+ .start = GTA02_GPIO_HOLD_KEY, -+ .end = GTA02_GPIO_HOLD_KEY, -+ }, -+ [2] = { -+ .start = GTA02_GPIO_JACK_INSERT, -+ .end = GTA02_GPIO_JACK_INSERT, -+ }, -+}; -+ -+static struct platform_device gta02_button_dev = { -+ .name = "neo1973-button", -+ .num_resources = ARRAY_SIZE(gta02_button_resources), -+ .resource = gta02_button_resources, -+}; -+ -+static struct platform_device gta02_pm_gsm_dev = { -+ .name = "neo1973-pm-gsm", -+}; -+ -+static struct platform_device gta02_pm_usbhost_dev = { -+ .name = "neo1973-pm-host", -+}; -+ -+ -+/* USB */ -+static struct s3c2410_hcd_info gta02_usb_info = { -+ .port[0] = { -+ .flags = S3C_HCDFLG_USED, -+ }, -+ .port[1] = { -+ .flags = 0, -+ }, -+}; -+ -+static int glamo_irq_is_wired(void) -+{ -+ int rc; -+ int count = 0; -+ -+ /* -+ * GTA02 S-Media IRQs prior to A5 are broken due to a lack of -+ * a pullup on the INT# line. Check for the bad behaviour. -+ */ -+ s3c2410_gpio_setpin(S3C2410_GPG4, 0); -+ s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP); -+ s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_INP); -+ /* -+ * we force it low ourselves for a moment and resume being input. -+ * If there is a pullup, it won't stay low for long. But if the -+ * level converter is there as on < A5 revision, the weak keeper -+ * on the input of the LC will hold the line low indefinitiely -+ */ -+ do -+ rc = s3c2410_gpio_getpin(S3C2410_GPG4); -+ while ((!rc) && ((count++) < 10)); -+ if (rc) { /* it got pulled back up, it's good */ -+ printk(KERN_INFO "Detected S-Media IRQ# pullup, " -+ "enabling interrupt\n"); -+ return 0; -+ } else /* Gah we can't work with this level converter */ -+ printk(KERN_WARNING "** Detected bad IRQ# circuit found" -+ " on pre-A5 GTA02: S-Media interrupt disabled **\n"); -+ return -ENODEV; -+} -+ -+ -+static void -+gta02_glamo_mmc_set_power(unsigned char power_mode, unsigned short vdd) -+{ -+ int mv = 1650; -+ int timeout = 500; -+ -+ printk(KERN_DEBUG "mmc_set_power(power_mode=%u, vdd=%u\n", -+ power_mode, vdd); -+ -+ switch (system_rev) { -+ case GTA02v1_SYSTEM_REV: -+ case GTA02v2_SYSTEM_REV: -+ break; -+ case GTA02v3_SYSTEM_REV: -+ case GTA02v4_SYSTEM_REV: -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ switch (power_mode) { -+ case MMC_POWER_ON: -+ case MMC_POWER_UP: -+ /* depend on pcf50633 driver init + not suspended */ -+ while (pcf50633_ready(pcf50633_global) && (timeout--)) -+ msleep(5); -+ -+ if (timeout < 0) { -+ printk(KERN_ERR"gta02_glamo_mmc_set_power " -+ "BAILING on timeout\n"); -+ return; -+ } -+ /* select and set the voltage */ -+ if (vdd > 7) -+ mv += 350 + 100 * (vdd - 8); -+ printk(KERN_INFO "SD power -> %dmV\n", mv); -+ pcf50633_voltage_set(pcf50633_global, -+ PCF50633_REGULATOR_HCLDO, mv); -+ pcf50633_onoff_set(pcf50633_global, -+ PCF50633_REGULATOR_HCLDO, 1); -+ break; -+ case MMC_POWER_OFF: -+ /* power off happens during suspend, when pcf50633 can -+ * be already gone and not coming back... just forget -+ * the action then because pcf50633 suspend already -+ * dealt with it, otherwise we spin forever -+ */ -+ if (pcf50633_ready(pcf50633_global)) -+ return; -+ pcf50633_onoff_set(pcf50633_global, -+ PCF50633_REGULATOR_HCLDO, 0); -+ break; -+ } -+ break; -+ } -+} -+ -+ -+static int gta02_glamo_mci_all_dependencies_resumed(struct platform_device *dev) -+{ -+ return resume_dep_glamo_mci_pcf.called_flag; -+} -+ -+/* register jbt resume action to be dependent on pcf50633 and glamo resume */ -+ -+static void gta02_glamo_mci_suspending(struct platform_device *dev) -+{ -+ int glamo_mci_resume(struct platform_device *dev); -+ -+#if defined(CONFIG_MFD_GLAMO_MCI) && defined(CONFIG_PM) -+ resume_dep_glamo_mci_pcf.callback = (void (*)(void *))glamo_mci_resume; -+ resume_dep_glamo_mci_pcf.context = (void *)dev; -+ pcf50633_register_resume_dependency(pcf50633_global, -+ &resume_dep_glamo_mci_pcf); -+#endif -+} -+ -+ -+ -+/* Smedia Glamo 3362 */ -+ -+/* -+ * we crank down SD Card clock dynamically when GPS is powered -+ */ -+ -+static int gta02_glamo_mci_use_slow(void) -+{ -+ return neo1973_pm_gps_is_on(); -+} -+ -+static struct glamofb_platform_data gta02_glamo_pdata = { -+ .width = 43, -+ .height = 58, -+ /* 24.5MHz --> 40.816ns */ -+ .pixclock = 40816, -+ .left_margin = 8, -+ .right_margin = 16, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .hsync_len = 8, -+ .vsync_len = 2, -+ .fb_mem_size = 0x400000, /* glamo has 8 megs of SRAM. we use 4 */ -+ .xres = { -+ .min = 240, -+ .max = 640, -+ .defval = 480, -+ }, -+ .yres = { -+ .min = 320, -+ .max = 640, -+ .defval = 640, -+ }, -+ .bpp = { -+ .min = 16, -+ .max = 16, -+ .defval = 16, -+ }, -+ //.spi_info = &glamo_spi_cfg, -+ .spigpio_info = &glamo_spigpio_cfg, -+ -+ /* glamo MMC function platform data */ -+ .glamo_set_mci_power = gta02_glamo_mmc_set_power, -+ .glamo_mci_use_slow = gta02_glamo_mci_use_slow, -+ .glamo_irq_is_wired = glamo_irq_is_wired, -+ .mci_suspending = gta02_glamo_mci_suspending, -+ .mci_all_dependencies_resumed = -+ gta02_glamo_mci_all_dependencies_resumed, -+}; -+ -+static struct resource gta02_glamo_resources[] = { -+ [0] = { -+ .start = S3C2410_CS1, -+ .end = S3C2410_CS1 + 0x1000000 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = GTA02_IRQ_3D, -+ .end = GTA02_IRQ_3D, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [2] = { -+ .start = GTA02v1_GPIO_3D_RESET, -+ .end = GTA02v1_GPIO_3D_RESET, -+ }, -+}; -+ -+static struct platform_device gta02_glamo_dev = { -+ .name = "glamo3362", -+ .num_resources = ARRAY_SIZE(gta02_glamo_resources), -+ .resource = gta02_glamo_resources, -+ .dev = { -+ .platform_data = >a02_glamo_pdata, -+ }, -+}; -+ -+static void mangle_glamo_res_by_system_rev(void) -+{ -+ switch (system_rev) { -+ case GTA02v1_SYSTEM_REV: -+ break; -+ default: -+ gta02_glamo_resources[2].start = GTA02_GPIO_3D_RESET; -+ gta02_glamo_resources[2].end = GTA02_GPIO_3D_RESET; -+ break; -+ } -+ -+ switch (system_rev) { -+ case GTA02v1_SYSTEM_REV: -+ case GTA02v2_SYSTEM_REV: -+ case GTA02v3_SYSTEM_REV: -+ /* case GTA02v4_SYSTEM_REV: - FIXME: handle this later */ -+ /* The hardware is missing a pull-up resistor and thus can't -+ * support the Smedia Glamo IRQ */ -+ gta02_glamo_resources[1].start = 0; -+ gta02_glamo_resources[1].end = 0; -+ break; -+ } -+} -+ -+static void __init gta02_map_io(void) -+{ -+ s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); -+ s3c24xx_init_clocks(12000000); -+ s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); -+} -+ -+static irqreturn_t gta02_modem_irq(int irq, void *param) -+{ -+ printk(KERN_DEBUG "modem wakeup interrupt\n"); -+ gta_gsm_interrupts++; -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t ar6000_wow_irq(int irq, void *param) -+{ -+ printk(KERN_DEBUG "ar6000_wow interrupt\n"); -+ return IRQ_HANDLED; -+} -+ -+/* -+ * hardware_ecc=1|0 -+ */ -+static char hardware_ecc_str[4] __initdata = ""; -+ -+static int __init hardware_ecc_setup(char *str) -+{ -+ if (str) -+ strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str)); -+ return 1; -+} -+ -+__setup("hardware_ecc=", hardware_ecc_setup); -+ -+static void __init gta02_machine_init(void) -+{ -+ int rc; -+ -+ /* set the panic callback to make AUX blink fast */ -+ panic_blink = gta02_panic_blink; -+ -+ switch (system_rev) { -+ case GTA02v6_SYSTEM_REV: -+ /* we need push-pull interrupt from motion sensors */ -+ lis302_pdata_top.open_drain = 0; -+ lis302_pdata_bottom.open_drain = 0; -+ break; -+ default: -+ break; -+ } -+ -+ spin_lock_init(&motion_irq_lock); -+ -+ /* do not force soft ecc if we are asked to use hardware_ecc */ -+ if (hardware_ecc_str[0] == '1') -+ gta02_nand_info.software_ecc = 0; -+ -+ s3c_device_usb.dev.platform_data = >a02_usb_info; -+ s3c_device_nand.dev.platform_data = >a02_nand_info; -+ s3c_device_sdi.dev.platform_data = >a02_mmc_cfg; -+ -+ /* Only GTA02v1 has a SD_DETECT GPIO. Since the slot is not -+ * hot-pluggable, this is not required anyway */ -+ switch (system_rev) { -+ case GTA02v1_SYSTEM_REV: -+ break; -+ default: -+ gta02_mmc_cfg.gpio_detect = 0; -+ break; -+ } -+ -+ /* acc sensor chip selects */ -+ s3c2410_gpio_setpin(S3C2410_GPD12, 1); -+ s3c2410_gpio_cfgpin(S3C2410_GPD12, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_setpin(S3C2410_GPD13, 1); -+ s3c2410_gpio_cfgpin(S3C2410_GPD13, S3C2410_GPIO_OUTPUT); -+ -+ s3c24xx_udc_set_platdata(>a02_udc_cfg); -+ set_s3c2410ts_info(>a02_ts_cfg); -+ -+ /* FIXME: hardcoded WLAN module power-up */ -+ s3c2410_gpio_cfgpin(GTA02_CHIP_PWD, S3C2410_GPIO_OUTPUT); -+ -+ /* Power is down */ -+ s3c2410_gpio_setpin(GTA02_CHIP_PWD, 1); -+ mdelay(100); -+ -+ switch (system_rev) { -+ case GTA02v1_SYSTEM_REV: -+ s3c2410_gpio_setpin(GTA02_CHIP_PWD, 0); -+ break; -+ default: -+ /* Chip is in reset state */ -+ s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0); -+ s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT); -+ mdelay(100); -+ /* Power is up */ -+ s3c2410_gpio_setpin(GTA02_CHIP_PWD, 0); -+ mdelay(100); -+ /* Chip is out of reset */ -+ s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1); -+ break; -+ } -+ mangle_glamo_res_by_system_rev(); -+ platform_device_register(>a02_glamo_dev); -+ -+ platform_device_register(&s3c_device_spi_acc1); -+ platform_device_register(&s3c_device_spi_acc2); -+ platform_device_register(>a02_button_dev); -+ platform_device_register(>a02_pm_gsm_dev); -+ platform_device_register(>a02_pm_usbhost_dev); -+ -+ mangle_pmu_pdata_by_system_rev(); -+ platform_device_register(>a02_pmu_dev); -+ platform_device_register(>a02_vibrator_dev); -+ platform_device_register(>a02_led_dev); -+ -+ -+ platform_device_register(>a02_sdio_dev); -+ -+ platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); -+ -+#ifdef CONFIG_GTA02_HDQ -+ switch (system_rev) { -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ platform_device_register(>a02_hdq_device); -+ platform_device_register(&bq27000_battery_device); -+ break; -+ default: -+ break; -+ } -+#endif -+ s3c2410_pm_init(); -+ -+ /* Make sure the modem can wake us up */ -+ set_irq_type(GTA02_IRQ_MODEM, IRQT_RISING); -+ rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED, -+ "modem", NULL); -+ if (rc < 0) -+ printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n"); -+ enable_irq_wake(GTA02_IRQ_MODEM); -+ -+ /* Make sure the wifi module can wake us up*/ -+ set_irq_type(GTA02_IRQ_WLAN_GPIO1, IRQT_RISING); -+ rc = request_irq(GTA02_IRQ_WLAN_GPIO1, ar6000_wow_irq, IRQF_DISABLED, -+ "ar6000", NULL); -+ -+ if (rc < 0) -+ printk(KERN_ERR "GTA02: can't request ar6k wakeup IRQ\n"); -+ enable_irq_wake(GTA02_IRQ_WLAN_GPIO1); -+} -+ -+MACHINE_START(NEO1973_GTA02, "GTA02") -+ .phys_io = S3C2410_PA_UART, -+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, -+ .boot_params = S3C2410_SDRAM_PA + 0x100, -+ .map_io = gta02_map_io, -+ .init_irq = s3c24xx_init_irq, -+ .init_machine = gta02_machine_init, -+ .timer = &s3c24xx_timer, -+MACHINE_END -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/mach-hxd8.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/mach-hxd8.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,381 @@ -+/* linux/arch/arm/mach-s3c2440/mach-hxd8.c -+ * -+ * S3C2440 Machine Support for the FIC HXD8 -+ * -+ * Copyright (c) 2007 Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+//#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+//#include "s3c2410.h" -+//#include "s3c2440.h" -+//#include "clock.h" -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static struct map_desc hxd8_iodesc[] __initdata = { -+ /* ISA IO Space map (memory space selected by A24) */ -+ -+ { -+ .virtual = (u32)S3C24XX_VA_ISA_WORD, -+ .pfn = __phys_to_pfn(S3C2410_CS2), -+ .length = 0x10000, -+ .type = MT_DEVICE, -+ }, { -+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, -+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), -+ .length = SZ_4M, -+ .type = MT_DEVICE, -+ }, { -+ .virtual = (u32)S3C24XX_VA_ISA_BYTE, -+ .pfn = __phys_to_pfn(S3C2410_CS2), -+ .length = 0x10000, -+ .type = MT_DEVICE, -+ }, { -+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, -+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), -+ .length = SZ_4M, -+ .type = MT_DEVICE, -+ } -+}; -+ -+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -+ -+static struct s3c2410_uartcfg hxd8_uartcfgs[] __initdata = { -+ [0] = { -+ .hwport = 0, -+ .flags = 0, -+ .ucon = 0x3c5, -+ .ulcon = 0x03, -+ .ufcon = 0x51, -+ }, -+ [1] = { -+ .hwport = 1, -+ .flags = 0, -+ .ucon = 0x3c5, -+ .ulcon = 0x03, -+ .ufcon = 0x51, -+ }, -+ [2] = { -+ .hwport = 2, -+ .flags = 0, -+ .ucon = 0x3c5, -+ .ulcon = 0x03, -+ .ufcon = 0x51, -+ } -+}; -+ -+static struct s3c2410_nand_set hxd8_nand_sets[] = { -+ [0] = { -+ .name = "hxd8-nand", -+ .nr_chips = 1, -+ .flags = S3C2410_NAND_BBT, -+ }, -+ [1] = { -+ .name = "hxd8-nand-1", -+ .nr_chips = 1, -+ .flags = S3C2410_NAND_BBT, -+ }, -+ [2] = { -+ .name = "hxd8-nand-2", -+ .nr_chips = 1, -+ .flags = S3C2410_NAND_BBT, -+ }, -+}; -+ -+/* choose a set of timings which should suit most 512Mbit -+ * chips and beyond. -+*/ -+ -+static struct s3c2410_platform_nand hxd8_nand_info = { -+ .tacls = 20, -+ .twrph0 = 60, -+ .twrph1 = 20, -+ .nr_sets = ARRAY_SIZE(hxd8_nand_sets), -+ .sets = hxd8_nand_sets, -+}; -+ -+/* PMU configuration */ -+ -+static struct pcf50606_platform_data hxd8_pcf_pdata = { -+ .used_features = PCF50606_FEAT_EXTON | -+ PCF50606_FEAT_BBC | -+ PCF50606_FEAT_WDT | -+ PCF50606_FEAT_RTC | -+ PCF50606_FEAT_PWM | -+ PCF50606_FEAT_PWM_BL | -+ PCF50606_FEAT_BATVOLT, -+ .onkey_seconds_required = 5, -+ .init_brightness = 8, -+ .rails = { -+ [PCF50606_REGULATOR_D1REG] = { -+ .name = "rc_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50606_REGULATOR_D2REG] = { -+ .name = "gps_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50606_REGULATOR_D3REG] = { -+ .name = "io2_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50606_REGULATOR_DCD] = { -+ .name = "core_1v3", -+ .voltage = { -+ .init = 1300, -+ .max = 1500, -+ }, -+ }, -+ [PCF50606_REGULATOR_DCDE] = { -+ .name = "io1_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50606_REGULATOR_DCUD] = { -+ .name = "rf_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50606_REGULATOR_IOREG] = { -+ .name = "audio_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50606_REGULATOR_LPREG] = { -+ .name = "lcm_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ }, -+}; -+ -+static struct resource hxd8_pmu_resources[] = { -+ [0] = { -+ .flags = IORESOURCE_IRQ, -+ .start = HXD8_IRQ_PCF50606, -+ .end = HXD8_IRQ_PCF50606, -+ }, -+}; -+ -+static struct platform_device hxd8_pmu_dev = { -+ .name = "pcf50606", -+ .num_resources = ARRAY_SIZE(hxd8_pmu_resources), -+ .resource = hxd8_pmu_resources, -+ .dev = { -+ .platform_data = &hxd8_pcf_pdata, -+ }, -+}; -+ -+/* LCD driver info */ -+ -+static struct s3c2410fb_display hxd8_displays[] __initdata = { -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 480, -+ .height = 272, -+ .xres = 480, -+ .yres = 272, -+ .bpp = 16, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 2, -+ .right_margin = 2, -+ .hsync_len = 41, -+ .upper_margin = 2, -+ .lower_margin = 2, -+ .vsync_len = 10, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME, -+ }, -+}; -+ -+static struct s3c2410fb_mach_info hxd8_lcd_cfg __initdata = { -+ .displays = hxd8_displays, -+ .num_displays = ARRAY_SIZE(hxd8_displays), -+ .default_display = 1, -+ -+ .lpcsel = ((0xCE6) & ~7), -+}; -+ -+static struct platform_device hxd8_pm_gsm_dev = { -+ .name = "neo1973-pm-gsm", -+}; -+ -+static void gta01_udc_command(enum s3c2410_udc_cmd_e cmd) -+{ -+ printk(KERN_DEBUG "%s(%d)\n", __func__, cmd); -+ -+ switch (cmd) { -+ case S3C2410_UDC_P_ENABLE: -+ s3c2410_gpio_setpin(HXD8_GPIO_USB_PULLUP, 1); -+ break; -+ case S3C2410_UDC_P_DISABLE: -+ s3c2410_gpio_setpin(HXD8_GPIO_USB_PULLUP, 0); -+ break; -+ case S3C2410_UDC_P_RESET: -+ /* FIXME! */ -+ break; -+ default: -+ break; -+ } -+} -+ -+/* USB Charger */ -+ -+static void hxd8_udc_vbus_draw(unsigned int ma) -+{ -+ if (ma >= 500) { -+ /* enable fast charge */ -+ printk(KERN_DEBUG "udc: enabling fast charge\n"); -+ s3c2410_gpio_setpin(HXD8_GPIO_USB_CUR_SEL, 1); -+ } else { -+ /* disable fast charge */ -+ printk(KERN_DEBUG "udc: disabling fast charge\n"); -+ s3c2410_gpio_setpin(HXD8_GPIO_USB_CUR_SEL, 0); -+ } -+} -+ -+static struct s3c2410_udc_mach_info hxd8_udc_cfg = { -+ .vbus_draw = hxd8_udc_vbus_draw, -+}; -+ -+/* Touch Screen */ -+static struct s3c2410_ts_mach_info hxd8_ts_cfg = { -+ .delay = 10000, -+ .presc = 49, -+ .oversampling_shift = 4, -+}; -+ -+static struct platform_device *hxd8_devices[] __initdata = { -+ &s3c_device_usb, -+ &s3c_device_lcd, -+ &s3c_device_wdt, -+ &s3c_device_i2c, -+ &s3c_device_iis, -+ &s3c_device_sdi, -+ &s3c_device_usbgadget, -+ &s3c_device_nand, -+ &s3c_device_ts, -+}; -+ -+static void __init hxd8_map_io(void) -+{ -+ s3c24xx_init_io(hxd8_iodesc, ARRAY_SIZE(hxd8_iodesc)); -+ s3c24xx_init_clocks(16934400); -+ s3c24xx_init_uarts(hxd8_uartcfgs, ARRAY_SIZE(hxd8_uartcfgs)); -+} -+ -+static void __init hxd8_machine_init(void) -+{ -+ hxd8_udc_cfg.udc_command = gta01_udc_command; -+ s3c_device_nand.dev.platform_data = &hxd8_nand_info; -+ -+ s3c24xx_fb_set_platdata(&hxd8_lcd_cfg); -+ -+ s3c24xx_udc_set_platdata(&hxd8_udc_cfg); -+ set_s3c2410ts_info(&hxd8_ts_cfg); -+ -+ //platform_device_register(>a01_button_dev); -+ platform_device_register(&hxd8_pm_gsm_dev); -+ -+ platform_device_register(&hxd8_pmu_dev); -+ -+ platform_add_devices(hxd8_devices, ARRAY_SIZE(hxd8_devices)); -+ -+ s3c2410_pm_init(); -+} -+ -+MACHINE_START(HXD8, "HXD8") -+ /* Maintainer: Harald Welte */ -+ .phys_io = S3C2410_PA_UART, -+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, -+ .boot_params = S3C2410_SDRAM_PA + 0x100, -+ -+ .init_irq = s3c24xx_init_irq, -+ .map_io = hxd8_map_io, -+ .init_machine = hxd8_machine_init, -+ .timer = &s3c24xx_timer, -+MACHINE_END -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/Makefile -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2440/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o d - obj-$(CONFIG_CPU_S3C2440) += irq.o - obj-$(CONFIG_CPU_S3C2440) += clock.o - obj-$(CONFIG_S3C2440_DMA) += dma.o -+obj-$(CONFIG_S3C2440_C_FIQ) += fiq_c_isr.o - - # Machine support - -@@ -21,3 +22,6 @@ obj-$(CONFIG_MACH_OSIRIS) += mach-osiris - obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o - obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o - obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o -+obj-$(CONFIG_MACH_HXD8) += mach-hxd8.o -+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o -+obj-$(CONFIG_MACH_M800) += mach-glofiish.o -Index: linux-2.6.24.7/arch/arm/mach-s3c2440/s3c2440.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2440/s3c2440.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2440/s3c2440.c 2008-12-11 22:46:49.000000000 +0100 -@@ -46,6 +46,9 @@ int __init s3c2440_init(void) - s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; - s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT; - -+ /* make sure SD/MMC driver can distinguish 2440 from 2410 */ -+ s3c_device_sdi.name = "s3c2440-sdi"; -+ - /* register our system device for everything else */ - - return sysdev_register(&s3c2440_sysdev); -Index: linux-2.6.24.7/arch/arm/mach-s3c2442/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2442/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2442/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -6,10 +6,11 @@ - - config CPU_S3C2442 - bool -- depends on ARCH_S3C2410 -+ depends on CPU_S3C2440 - select S3C2410_CLOCK - select S3C2410_GPIO - select S3C2410_PM if PM -+ select S3C2440_DMA if S3C2410_DMA - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help -Index: linux-2.6.24.7/arch/arm/mach-s3c2442/s3c2442.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-s3c2442/s3c2442.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/mach-s3c2442/s3c2442.c 2008-12-11 22:46:49.000000000 +0100 -@@ -21,6 +21,7 @@ - - #include - #include -+#include - - static struct sys_device s3c2442_sysdev = { - .cls = &s3c2442_sysclass, -@@ -30,5 +31,8 @@ int __init s3c2442_init(void) - { - printk("S3C2442: Initialising architecture\n"); - -+ /* make sure SD/MMC driver can distinguish 2440 from 2410 */ -+ s3c_device_sdi.name = "s3c2440-sdi"; -+ - return sysdev_register(&s3c2442_sysdev); - } -Index: linux-2.6.24.7/arch/arm/plat-s3c/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -61,7 +61,7 @@ comment "Power management" - - config S3C2410_PM_DEBUG - bool "S3C2410 PM Suspend debug" -- depends on PLAT_S3C && PM -+ depends on PLAT_S3C && PM && DEBUG_LL - help - Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/cpu.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c24xx/cpu.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/cpu.c 2008-12-11 22:46:49.000000000 +0100 -@@ -68,6 +68,7 @@ static const char name_s3c2410[] = "S3C - static const char name_s3c2412[] = "S3C2412"; - static const char name_s3c2440[] = "S3C2440"; - static const char name_s3c2442[] = "S3C2442"; -+static const char name_s3c2442b[] = "S3C2442B"; - static const char name_s3c2443[] = "S3C2443"; - static const char name_s3c2410a[] = "S3C2410A"; - static const char name_s3c2440a[] = "S3C2440A"; -@@ -119,6 +120,15 @@ static struct cpu_table cpu_ids[] __init - .name = name_s3c2442 - }, - { -+ .idcode = 0x32440aab, -+ .idmask = 0xffffffff, -+ .map_io = s3c244x_map_io, -+ .init_clocks = s3c244x_init_clocks, -+ .init_uarts = s3c244x_init_uarts, -+ .init = s3c2442_init, -+ .name = name_s3c2442b -+ }, -+ { - .idcode = 0x32412001, - .idmask = 0xffffffff, - .map_io = s3c2412_map_io, -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/devs.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c24xx/devs.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/devs.c 2008-12-11 22:46:49.000000000 +0100 -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -207,6 +208,23 @@ struct platform_device s3c_device_nand = - - EXPORT_SYMBOL(s3c_device_nand); - -+/* Touchscreen */ -+struct platform_device s3c_device_ts = { -+ .name = "s3c2410-ts", -+ .id = -1, -+}; -+ -+EXPORT_SYMBOL(s3c_device_ts); -+ -+static struct s3c2410_ts_mach_info s3c2410ts_info; -+ -+void set_s3c2410ts_info(struct s3c2410_ts_mach_info *hard_s3c2410ts_info) -+{ -+ memcpy(&s3c2410ts_info,hard_s3c2410ts_info,sizeof(struct s3c2410_ts_mach_info)); -+ s3c_device_ts.dev.platform_data = &s3c2410ts_info; -+} -+EXPORT_SYMBOL(set_s3c2410ts_info); -+ - /* USB Device (Gadget)*/ - - static struct resource s3c_usbgadget_resource[] = { -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/gpio.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c24xx/gpio.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/gpio.c 2008-12-11 22:46:49.000000000 +0100 -@@ -32,6 +32,7 @@ - #include - - #include -+#include - - void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) - { -@@ -186,3 +187,439 @@ int s3c2410_gpio_getirq(unsigned int pin - } - - EXPORT_SYMBOL(s3c2410_gpio_getirq); -+ -+int s3c2410_irq_to_gpio(unsigned int irq) -+{ -+ /* not valid interrupts */ -+ if (irq > 15 + IRQ_EINT8) -+ return -1; -+ -+ if (irq < IRQ_EINT4) -+ return (irq - IRQ_EINT0) + S3C2410_GPF0; -+ -+ if (irq < IRQ_EINT8) -+ return (irq - IRQ_EINT4) + S3C2410_GPF4; -+ -+ return (irq - IRQ_EINT8) + S3C2410_GPG0; -+} -+ -+EXPORT_SYMBOL(s3c2410_irq_to_gpio); -+ -+static void pretty_dump(u32 cfg, u32 state, u32 pull, -+ const char ** function_names_2, -+ const char ** function_names_3, -+ const char * prefix, -+ int count) -+{ -+ int n; -+ const char *tag_type = NULL, -+ *tag_state = NULL, -+ *tag_pulldown = NULL, -+ * level0 = "0", -+ * level1 = "1"; -+ -+ for (n = 0; n < count; n++) { -+ switch ((cfg >> (2 * n)) & 3) { -+ case 0: -+ tag_type = "input "; -+ break; -+ case 1: -+ tag_type = "OUTPUT "; -+ break; -+ case 2: -+ if (function_names_2) { -+ if (function_names_2[n]) -+ tag_type = function_names_2[n]; -+ else -+ tag_type = "*** ILLEGAL CFG (2) *** "; -+ } else -+ tag_type = "(function) "; -+ break; -+ default: -+ if (function_names_3) { -+ if (function_names_3[n]) -+ tag_type = function_names_3[n]; -+ else -+ tag_type = "*** ILLEGAL CFG (3) *** "; -+ } else -+ tag_type = "(function) "; -+ break; -+ } -+ if ((state >> n) & 1) -+ tag_state = level1; -+ else -+ tag_state = level0; -+ -+ if (((pull >> n) & 1)) -+ tag_pulldown = ""; -+ else -+ tag_pulldown = "(pulldown)"; -+ -+ printk(KERN_INFO"%s%02d: %s %s %s\n", prefix, n, tag_type, -+ tag_state, tag_pulldown); -+ } -+ printk(KERN_INFO"\n"); -+} -+ -+static void pretty_dump_a(u32 cfg, u32 state, -+ const char ** function_names, -+ const char * prefix, -+ int count) -+{ -+ int n; -+ const char *tag_type = NULL, -+ *tag_state = NULL, -+ * level0 = "0", -+ * level1 = "1"; -+ -+ for (n = 0; n < count; n++) { -+ switch ((cfg >> n) & 1) { -+ case 0: -+ tag_type = "OUTPUT "; -+ break; -+ default: -+ if (function_names) { -+ if (function_names[n]) -+ tag_type = function_names[n]; -+ else -+ tag_type = "*** ILLEGAL CFG *** "; -+ } else -+ tag_type = "(function) "; -+ break; -+ } -+ if ((state >> n) & 1) -+ tag_state = level1; -+ else -+ tag_state = level0; -+ -+ printk(KERN_INFO"%s%02d: %s %s\n", prefix, n, tag_type, -+ tag_state); -+ } -+ printk(KERN_INFO"\n"); -+} -+ -+static const char * funcs_a[] = { -+ "ADDR0 ", -+ "ADDR16 ", -+ "ADDR17 ", -+ "ADDR18 ", -+ "ADDR19 ", -+ "ADDR20 ", -+ "ADDR21 ", -+ "ADDR22 ", -+ "ADDR23 ", -+ "ADDR24 ", -+ "ADDR25 ", -+ "ADDR26 ", -+ "nGCS[1] ", -+ "nGCS[2] ", -+ "nGCS[3] ", -+ "nGCS[4] ", -+ "nGCS[5] ", -+ "CLE ", -+ "ALE ", -+ "nFWE ", -+ "nFRE ", -+ "nRSTOUT ", -+ "nFCE ", -+ NULL, -+ NULL -+}; -+ -+ -+static const char * funcs_b2[] = { -+ "TOUT0 ", -+ "TOUT1 ", -+ "TOUT2 ", -+ "TOUT3 ", -+ "TCLK[0] ", -+ "nXBACK ", -+ "nXBREQ ", -+ "nXDACK1 ", -+ "nXDREQ1 ", -+ "nXDACK0 ", -+ "nXDREQ0 ", -+}; -+static const char * funcs_b3[] = { -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+}; -+ -+static const char * funcs_c2[] = { -+ "LEND ", -+ "VCLK ", -+ "VLINE ", -+ "VFRAME ", -+ "VM ", -+ "LCD_LPCOE ", -+ "LCD_LPCREV ", -+ "LCD_LPCREVB", -+ "VD[0] ", -+ "VD[1] ", -+ "VD[2] ", -+ "VD[3] ", -+ "VD[4] ", -+ "VD[5] ", -+ "VD[6] ", -+ "VD[7] ", -+}; -+static const char * funcs_c3[] = { -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ "I2SSDI ", -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+}; -+ -+static const char * funcs_d2[] = { -+ "VD[8] ", -+ "VD[9] ", -+ "VD[10] ", -+ "VD[11] ", -+ "VD[12] ", -+ "VD[13] ", -+ "VD[14] ", -+ "VD[15] ", -+ "VD[16] ", -+ "VD[17] ", -+ "VD[18] ", -+ "VD[19] ", -+ "VD[20] ", -+ "VD[21] ", -+ "VD[22] ", -+ "VD[23] ", -+}; -+static const char * funcs_d3[] = { -+ "nSPICS1 ", -+ "SPICLK1 ", -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ "SPIMISO1 ", -+ "SPIMOSI1 ", -+ "SPICLK1 ", -+ NULL, -+ NULL, -+ NULL, -+ "nSS1 ", -+ "nSS0 ", -+}; -+ -+static const char * funcs_e2[] = { -+ "I2SLRCK ", -+ "I2SSCLK ", -+ "CDCLK ", -+ "I2SDI ", -+ "I2SDO ", -+ "SDCLK ", -+ "SDCMD ", -+ "SDDAT0 ", -+ "SDDAT1 ", -+ "SDDAT2 ", -+ "SDDAT3 ", -+ "SPIMISO0 ", -+ "SPIMOSI0 ", -+ "SPICLK0 ", -+ "IICSCL ", -+ "IICSDA ", -+}; -+static const char * funcs_e3[] = { -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+}; -+ -+static const char * funcs_f2[] = { -+ "EINT[0] ", -+ "EINT[1] ", -+ "EINT[2] ", -+ "EINT[3] ", -+ "EINT[4] ", -+ "EINT[5] ", -+ "EINT[6] ", -+ "EINT[7] ", -+}; -+static const char * funcs_f3[] = { -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+}; -+ -+ -+static const char * funcs_g2[] = { -+ "EINT[8] ", -+ "EINT[9] ", -+ "EINT[10] ", -+ "EINT[11] ", -+ "EINT[12] ", -+ "EINT[13] ", -+ "EINT[14] ", -+ "EINT[15] ", -+ "EINT[16] ", -+ "EINT[17] ", -+ "EINT[18] ", -+ "EINT[19] ", -+ "EINT[20] ", -+ "EINT[21] ", -+ "EINT[22] ", -+ "EINT[23] ", -+}; -+static const char * funcs_g3[] = { -+ NULL, -+ NULL, -+ "nSS0 ", -+ "nSS1 ", -+ "LCD_PWRDN ", -+ "SPIMISO1 ", -+ "SPIMOSI1 ", -+ "SPICLK1 ", -+ NULL, -+ "nRTS1 ", -+ "nCTS1 ", -+ "TCLK[1] ", -+ "nSPICS0 ", -+ NULL, -+ NULL, -+ NULL, -+}; -+ -+static const char * funcs_h2[] = { -+ "nCTS0 ", -+ "nRTS0 ", -+ "TXD[0] ", -+ "RXD[0] ", -+ "TXD[1] ", -+ "RXD[1] ", -+ "TXD[2] ", -+ "RXD[2] ", -+ "UEXTCLK ", -+ "CLKOUT0 ", -+ "CLKOUT1 ", -+}; -+static const char * funcs_h3[] = { -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ "nRTS1 ", -+ "nCTS1 ", -+ NULL, -+ "nSPICS0 ", -+ NULL, -+}; -+ -+static const char * funcs_j2[] = { -+ "CAMDATA[0] ", -+ "CAMDATA[1] ", -+ "CAMDATA[2] ", -+ "CAMDATA[3] ", -+ "CAMDATA[4] ", -+ "CAMDATA[5] ", -+ "CAMDATA[6] ", -+ "CAMDATA[7] ", -+ "CAMPCLK ", -+ "CAMVSYNC ", -+ "CAMHREF ", -+ "CAMCLKOUT ", -+ "CAMRESET ", -+}; -+static const char * funcs_j3[] = { -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+}; -+ -+/* used to dump GPIO states at suspend */ -+void s3c24xx_dump_gpio_states(void) -+{ -+ pretty_dump_a(__raw_readl(S3C2410_GPACON), -+ __raw_readl(S3C2410_GPADAT), -+ funcs_a, "GPA", 25); -+ pretty_dump(__raw_readl(S3C2410_GPBCON), -+ __raw_readl(S3C2410_GPBDAT), -+ __raw_readl(S3C2410_GPBUP), -+ funcs_b2, funcs_b3, "GPB", 11); -+ pretty_dump(__raw_readl(S3C2410_GPCCON), -+ __raw_readl(S3C2410_GPCDAT), -+ __raw_readl(S3C2410_GPCUP), -+ funcs_c2, funcs_c3, "GPC", 16); -+ pretty_dump(__raw_readl(S3C2410_GPDCON), -+ __raw_readl(S3C2410_GPDDAT), -+ __raw_readl(S3C2410_GPDUP), -+ funcs_d2, funcs_d3, "GPD", 16); -+ pretty_dump(__raw_readl(S3C2410_GPECON), -+ __raw_readl(S3C2410_GPEDAT), -+ __raw_readl(S3C2410_GPEUP), -+ funcs_e2, funcs_e3, "GPE", 16); -+ pretty_dump(__raw_readl(S3C2410_GPFCON), -+ __raw_readl(S3C2410_GPFDAT), -+ __raw_readl(S3C2410_GPFUP), -+ funcs_f2, funcs_f3, "GPF", 8); -+ pretty_dump(__raw_readl(S3C2410_GPGCON), -+ __raw_readl(S3C2410_GPGDAT), -+ __raw_readl(S3C2410_GPGUP), -+ funcs_g2, funcs_g3, "GPG", 16); -+ pretty_dump(__raw_readl(S3C2410_GPHCON), -+ __raw_readl(S3C2410_GPHDAT), -+ __raw_readl(S3C2410_GPHUP), -+ funcs_h2, funcs_h3, "GPH", 11); -+ pretty_dump(__raw_readl(S3C2440_GPJCON), -+ __raw_readl(S3C2440_GPJDAT), -+ __raw_readl(S3C2440_GPJUP), -+ funcs_j2, funcs_j3, "GPJ", 13); -+ -+} -+EXPORT_SYMBOL(s3c24xx_dump_gpio_states); -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/irq.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c24xx/irq.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/irq.c 2008-12-11 22:46:49.000000000 +0100 -@@ -133,12 +133,20 @@ static void - s3c_irq_mask(unsigned int irqno) - { - unsigned long mask; -- -+#ifdef CONFIG_S3C2440_C_FIQ -+ unsigned long flags; -+#endif - irqno -= IRQ_EINT0; -- -+#ifdef CONFIG_S3C2440_C_FIQ -+ local_save_flags(flags); -+ local_fiq_disable(); -+#endif - mask = __raw_readl(S3C2410_INTMSK); - mask |= 1UL << irqno; - __raw_writel(mask, S3C2410_INTMSK); -+#ifdef CONFIG_S3C2440_C_FIQ -+ local_irq_restore(flags); -+#endif - } - - static inline void -@@ -155,9 +163,19 @@ s3c_irq_maskack(unsigned int irqno) - { - unsigned long bitval = 1UL << (irqno - IRQ_EINT0); - unsigned long mask; -+#ifdef CONFIG_S3C2440_C_FIQ -+ unsigned long flags; -+#endif - -+#ifdef CONFIG_S3C2440_C_FIQ -+ local_save_flags(flags); -+ local_fiq_disable(); -+#endif - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); -+#ifdef CONFIG_S3C2440_C_FIQ -+ local_irq_restore(flags); -+#endif - - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -@@ -168,15 +186,25 @@ static void - s3c_irq_unmask(unsigned int irqno) - { - unsigned long mask; -+#ifdef CONFIG_S3C2440_C_FIQ -+ unsigned long flags; -+#endif - - if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23) - irqdbf2("s3c_irq_unmask %d\n", irqno); - - irqno -= IRQ_EINT0; - -+#ifdef CONFIG_S3C2440_C_FIQ -+ local_save_flags(flags); -+ local_fiq_disable(); -+#endif - mask = __raw_readl(S3C2410_INTMSK); - mask &= ~(1UL << irqno); - __raw_writel(mask, S3C2410_INTMSK); -+#ifdef CONFIG_S3C2440_C_FIQ -+ local_irq_restore(flags); -+#endif - } - - struct irq_chip s3c_irq_level_chip = { -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c24xx/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -16,7 +16,7 @@ if PLAT_S3C24XX - - config CPU_S3C244X - bool -- depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) -+ default y if CPU_S3C2440 || CPU_S3C2442 - help - Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. - -@@ -46,4 +46,9 @@ config MACH_SMDK - help - Common machine code for SMDK2410 and SMDK2440 - -+config MACH_NEO1973 -+ bool -+ help -+ Common machine code for Neo1973 hardware -+ - endif -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/Makefile -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c24xx/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -28,3 +28,11 @@ obj-$(CONFIG_PM) += pm.o - obj-$(CONFIG_PM) += sleep.o - obj-$(CONFIG_S3C2410_DMA) += dma.o - obj-$(CONFIG_MACH_SMDK) += common-smdk.o -+obj-$(CONFIG_MACH_NEO1973) += neo1973_version.o \ -+ neo1973_pm_host.o \ -+ neo1973_pm_gsm.o \ -+ neo1973_pm_gps.o \ -+ neo1973_pm_bt.o \ -+ neo1973_shadow.o \ -+ neo1973_pm_resume_reason.o \ -+ neo1973_memconfig.o -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_memconfig.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_memconfig.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,186 @@ -+/* -+ * Memory access timing control sysfs for the s3c24xx based device -+ * -+ * (C) 2008 by Openmoko Inc. -+ * Author: Andy Green -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+static ssize_t neo1973_memconfig_read(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ int index = attr->attr.name[strlen(attr->attr.name) - 1] - '0'; -+ u32 reg = *((u32 *)(S3C2410_MEMREG(((index + 1) << 2)))); -+ static const char *meaning[][8] = { -+ { -+ [0] = "normal (1 data)", -+ [1] = "4 data", -+ [2] = "8 data", -+ [3] = "16 data", -+ }, { -+ [0] = "2 clocks", -+ [1] = "3 clocks", -+ [2] = "4 clocks", -+ [3] = "6 clocks", -+ }, { -+ [0] = "0 clocks", -+ [1] = "1 clock", -+ [2] = "2 clocks", -+ [3] = "4 clocks", -+ }, { -+ [0] = "1 clock", -+ [1] = "2 clocks", -+ [2] = "3 clocks", -+ [3] = "4 clocks", -+ [4] = "6 clocks", -+ [5] = "8 clocks", -+ [6] = "10 clocks", -+ [7] = "14 clocks", -+ }, { /* after this, only for CS6 and CS7 */ -+ [0] = "ROM / SRAM", -+ [1] = "(illegal)", -+ [2] = "(illegal)", -+ [3] = "Sync DRAM", -+ }, { -+ [0] = "8 Column bits", -+ [1] = "9 Column bits", -+ [2] = "10 Column bits", -+ [3] = "(illegal)", -+ }, { -+ [0] = "2 clocks", -+ [1] = "3 clocks", -+ [2] = "4 clocks", -+ [3] = "(illegal)", -+ } -+ }; -+ -+ if (index >= 6) -+ if (((reg >> 15) & 3) == 3) /* DRAM */ -+ return sprintf(buf, "BANKCON%d = 0x%08X\n DRAM:\n" -+ " Trcd = %s\n SCAN = %s\n", index, -+ reg, meaning[5][reg & 3], -+ meaning[1][(reg >> 2) & 3]); -+ -+ return sprintf(buf, "BANKCON%d = 0x%08X\n Type = %s\n PMC = %s\n" -+ " Tacp = %s\n Tcah = %s\n Tcoh = %s\n Tacc = %s\n" -+ " Tcos = %s\n Tacs = %s\n", -+ index, reg, meaning[4][(reg >> 15) & 3], -+ meaning[0][reg & 3], -+ meaning[1][(reg >> 2) & 3], -+ meaning[2][(reg >> 4) & 3], -+ meaning[2][(reg >> 6) & 3], -+ meaning[3][(reg >> 8) & 7], -+ meaning[2][(reg >> 11) & 3], -+ meaning[2][(reg >> 13) & 3]); -+} -+ -+static ssize_t neo1973_memconfig_write(struct device *dev, -+ struct device_attribute *attr, const char *buf, size_t count) -+{ -+ int index = attr->attr.name[strlen(attr->attr.name) - 1] - '0'; -+ unsigned long val = simple_strtoul(buf, NULL, 16); -+ -+ dev_info(dev, "setting BANKCON%d <- 0x%08X\n", index, (u32)val); -+ -+ *((u32 *)(S3C2410_MEMREG(((index + 1) << 2)))) = (u32)val; -+ -+ return count; -+} -+ -+ -+static DEVICE_ATTR(BANKCON0, 0644, neo1973_memconfig_read, -+ neo1973_memconfig_write); -+static DEVICE_ATTR(BANKCON1, 0644, neo1973_memconfig_read, -+ neo1973_memconfig_write); -+static DEVICE_ATTR(BANKCON2, 0644, neo1973_memconfig_read, -+ neo1973_memconfig_write); -+static DEVICE_ATTR(BANKCON3, 0644, neo1973_memconfig_read, -+ neo1973_memconfig_write); -+static DEVICE_ATTR(BANKCON4, 0644, neo1973_memconfig_read, -+ neo1973_memconfig_write); -+static DEVICE_ATTR(BANKCON5, 0644, neo1973_memconfig_read, -+ neo1973_memconfig_write); -+static DEVICE_ATTR(BANKCON6, 0644, neo1973_memconfig_read, -+ neo1973_memconfig_write); -+static DEVICE_ATTR(BANKCON7, 0644, neo1973_memconfig_read, -+ neo1973_memconfig_write); -+ -+static struct attribute *neo1973_memconfig_sysfs_entries[] = { -+ &dev_attr_BANKCON0.attr, -+ &dev_attr_BANKCON1.attr, -+ &dev_attr_BANKCON2.attr, -+ &dev_attr_BANKCON3.attr, -+ &dev_attr_BANKCON4.attr, -+ &dev_attr_BANKCON5.attr, -+ &dev_attr_BANKCON6.attr, -+ &dev_attr_BANKCON7.attr, -+ NULL -+}; -+ -+static struct attribute_group neo1973_memconfig_attr_group = { -+ .name = NULL, -+ .attrs = neo1973_memconfig_sysfs_entries, -+}; -+ -+static int __init neo1973_memconfig_probe(struct platform_device *pdev) -+{ -+ dev_info(&pdev->dev, "starting\n"); -+ -+ switch (machine_arch_type) { -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ case MACH_TYPE_NEO1973_GTA01: -+ return -EINVAL; -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ default: -+ break; -+ } -+ -+ return sysfs_create_group(&pdev->dev.kobj, -+ &neo1973_memconfig_attr_group); -+} -+ -+static int neo1973_memconfig_remove(struct platform_device *pdev) -+{ -+ sysfs_remove_group(&pdev->dev.kobj, &neo1973_memconfig_attr_group); -+ return 0; -+} -+ -+static struct platform_driver neo1973_memconfig_driver = { -+ .probe = neo1973_memconfig_probe, -+ .remove = neo1973_memconfig_remove, -+ .driver = { -+ .name = "neo1973-memconfig", -+ }, -+}; -+ -+static int __devinit neo1973_memconfig_init(void) -+{ -+ return platform_driver_register(&neo1973_memconfig_driver); -+} -+ -+static void neo1973_memconfig_exit(void) -+{ -+ platform_driver_unregister(&neo1973_memconfig_driver); -+} -+ -+module_init(neo1973_memconfig_init); -+module_exit(neo1973_memconfig_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Andy Green "); -+MODULE_DESCRIPTION("neo1973 memconfig"); -+ -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_bt.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_bt.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,265 @@ -+/* -+ * Bluetooth PM code for the FIC Neo1973 GSM Phone -+ * -+ * (C) 2007 by Openmoko Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+#include -+#include -+#endif -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+#include -+#include -+#endif -+ -+#ifdef CONFIG_MACH_M800 -+#include -+#endif -+ -+#define DRVMSG "FIC Neo1973 Bluetooth Power Management" -+ -+static ssize_t bt_read(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ if (!strcmp(attr->attr.name, "power_on")) { -+ switch (machine_arch_type) { -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ case MACH_TYPE_NEO1973_GTA01: -+ if (pcf50606_onoff_get(pcf50606_global, -+ PCF50606_REGULATOR_D1REG) && -+ pcf50606_voltage_get(pcf50606_global, -+ PCF50606_REGULATOR_D1REG) == 3100) -+ goto out_1; -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ case MACH_TYPE_NEO1973_GTA02: -+ if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN)) -+ goto out_1; -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ -+#ifdef CONFIG_MACH_M800 -+ case MACH_TYPE_M800: -+ if (s3c2410_gpio_getpin(M800_GPIO_BT_POWER_1) && -+ s3c2410_gpio_getpin(M800_GPIO_BT_POWER_2)) -+ goto out_1; -+ break; -+#endif /* CONFIG_MACH_M800 */ -+ -+ } -+ } else if (!strcmp(attr->attr.name, "reset")) { -+ switch (machine_arch_type) { -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ case MACH_TYPE_NEO1973_GTA01: -+ if (s3c2410_gpio_getpin(GTA01_GPIO_BT_EN) == 0) -+ goto out_1; -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ case MACH_TYPE_NEO1973_GTA02: -+ if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0) -+ goto out_1; -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ -+ } -+ } -+ -+ return strlcpy(buf, "0\n", 3); -+out_1: -+ return strlcpy(buf, "1\n", 3); -+} -+ -+static ssize_t bt_write(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ unsigned long on = simple_strtoul(buf, NULL, 10); -+ unsigned int vol; -+ -+ if (!strcmp(attr->attr.name, "power_on")) { -+ switch (machine_arch_type) { -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ case MACH_TYPE_NEO1973_GTA01: -+ /* if we are powering up, assert reset, then power, -+ * then release reset */ -+ if (on) { -+ neo1973_gpb_setpin(GTA01_GPIO_BT_EN, 0); -+ pcf50606_voltage_set(pcf50606_global, -+ PCF50606_REGULATOR_D1REG, -+ 3100); -+ } -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_D1REG, on); -+ neo1973_gpb_setpin(GTA01_GPIO_BT_EN, on); -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ case MACH_TYPE_NEO1973_GTA02: -+ neo1973_gpb_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1); -+ if (on) -+ pcf50633_voltage_set(pcf50633_global, -+ PCF50633_REGULATOR_LDO4, 3200); -+ pcf50633_onoff_set(pcf50633_global, -+ PCF50633_REGULATOR_LDO4, on); -+ vol = pcf50633_voltage_get(pcf50633_global, -+ PCF50633_REGULATOR_LDO4); -+ dev_info(dev, "GTA02 Set PCF50633 LDO4 = %d\n", vol); -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ -+#ifdef CONFIG_MACH_M800 -+ case MACH_TYPE_M800: -+ s3c2410_gpio_setpin(M800_GPIO_BT_POWER_1, on); -+ s3c2410_gpio_setpin(M800_GPIO_BT_POWER_2, on); -+ break; -+#endif /* CONFIG_MACH_M800 */ -+ } -+ } else if (!strcmp(attr->attr.name, "reset")) { -+ /* reset is low-active, so we need to invert */ -+ switch (machine_arch_type) { -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ case MACH_TYPE_NEO1973_GTA01: -+ neo1973_gpb_setpin(GTA01_GPIO_BT_EN, on ? 0 : 1); -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ case MACH_TYPE_NEO1973_GTA02: -+ neo1973_gpb_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1); -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ -+ } -+ } -+ -+ return count; -+} -+ -+static DEVICE_ATTR(power_on, 0644, bt_read, bt_write); -+static DEVICE_ATTR(reset, 0644, bt_read, bt_write); -+ -+#ifdef CONFIG_PM -+static int gta01_bt_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ dev_dbg(&pdev->dev, DRVMSG ": suspending\n"); -+ /* FIXME: The PMU should save the PMU status, and the GPIO code should -+ * preserve the GPIO level, so there shouldn't be anything left to do -+ * for us, should there? */ -+ -+ return 0; -+} -+ -+static int gta01_bt_resume(struct platform_device *pdev) -+{ -+ dev_dbg(&pdev->dev, DRVMSG ": resuming\n"); -+ -+ return 0; -+} -+#else -+#define gta01_bt_suspend NULL -+#define gta01_bt_resume NULL -+#endif -+ -+static struct attribute *gta01_bt_sysfs_entries[] = { -+ &dev_attr_power_on.attr, -+ &dev_attr_reset.attr, -+ NULL -+}; -+ -+static struct attribute_group gta01_bt_attr_group = { -+ .name = NULL, -+ .attrs = gta01_bt_sysfs_entries, -+}; -+ -+static int __init gta01_bt_probe(struct platform_device *pdev) -+{ -+ dev_info(&pdev->dev, DRVMSG ": starting\n"); -+ -+ switch (machine_arch_type) { -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ case MACH_TYPE_NEO1973_GTA01: -+ /* we make sure that the voltage is off */ -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_D1REG, 0); -+ /* we pull reset to low to make sure that the chip doesn't -+ * drain power through the reset line */ -+ neo1973_gpb_setpin(GTA01_GPIO_BT_EN, 0); -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ case MACH_TYPE_NEO1973_GTA02: -+ /* we make sure that the voltage is off */ -+ pcf50633_onoff_set(pcf50633_global, -+ PCF50633_REGULATOR_LDO4, 0); -+ /* we pull reset to low to make sure that the chip doesn't -+ * drain power through the reset line */ -+ neo1973_gpb_setpin(GTA02_GPIO_BT_EN, 0); -+ break; -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ -+ } -+ -+ return sysfs_create_group(&pdev->dev.kobj, >a01_bt_attr_group); -+} -+ -+static int gta01_bt_remove(struct platform_device *pdev) -+{ -+ sysfs_remove_group(&pdev->dev.kobj, >a01_bt_attr_group); -+ -+ return 0; -+} -+ -+static struct platform_driver gta01_bt_driver = { -+ .probe = gta01_bt_probe, -+ .remove = gta01_bt_remove, -+ .suspend = gta01_bt_suspend, -+ .resume = gta01_bt_resume, -+ .driver = { -+ .name = "neo1973-pm-bt", -+ }, -+}; -+ -+static int __devinit gta01_bt_init(void) -+{ -+ return platform_driver_register(>a01_bt_driver); -+} -+ -+static void gta01_bt_exit(void) -+{ -+ platform_driver_unregister(>a01_bt_driver); -+} -+ -+module_init(gta01_bt_init); -+module_exit(gta01_bt_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION(DRVMSG); -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_gps.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_gps.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,689 @@ -+/* -+ * GPS Power Management code for the FIC Neo1973 GSM Phone -+ * -+ * (C) 2007 by Openmoko Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+#include -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+#include -+#include -+#endif -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+#include -+#include -+#endif -+ -+struct neo1973_pm_gps_data { -+ int power_was_on; -+}; -+ -+static struct neo1973_pm_gps_data neo1973_gps; -+ -+int neo1973_pm_gps_is_on(void) -+{ -+ return neo1973_gps.power_was_on; -+} -+EXPORT_SYMBOL_GPL(neo1973_pm_gps_is_on); -+ -+/* This is the 2.8V supply for the RTC crystal, the mail clock crystal and -+ * the input to VDD_RF */ -+static void gps_power_2v8_set(int on) -+{ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ if (on) -+ pcf50606_voltage_set(pcf50606_global, -+ PCF50606_REGULATOR_IOREG, 2800); -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_IOREG, on); -+ break; -+ case GTA01Bv2_SYSTEM_REV: -+ s3c2410_gpio_setpin(GTA01_GPIO_GPS_EN_2V8, on); -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ break; -+ } -+} -+ -+static int gps_power_2v8_get(void) -+{ -+ int ret = 0; -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ if (pcf50606_onoff_get(pcf50606_global, -+ PCF50606_REGULATOR_IOREG) && -+ pcf50606_voltage_get(pcf50606_global, -+ PCF50606_REGULATOR_IOREG) == 2800) -+ ret = 1; -+ break; -+ case GTA01Bv2_SYSTEM_REV: -+ if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_EN_2V8)) -+ ret = 1; -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ break; -+ } -+ -+ return ret; -+} -+ -+/* This is the 3V supply (AVDD) for the external RF frontend (LNA bias) */ -+static void gps_power_3v_set(int on) -+{ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ if (on) -+ pcf50606_voltage_set(pcf50606_global, -+ PCF50606_REGULATOR_D1REG, 3000); -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_D1REG, on); -+ break; -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ s3c2410_gpio_setpin(GTA01_GPIO_GPS_EN_3V, on); -+ break; -+ } -+} -+ -+static int gps_power_3v_get(void) -+{ -+ int ret = 0; -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ if (pcf50606_onoff_get(pcf50606_global, -+ PCF50606_REGULATOR_D1REG) && -+ pcf50606_voltage_get(pcf50606_global, -+ PCF50606_REGULATOR_D1REG) == 3000) -+ ret = 1; -+ break; -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_EN_3V)) -+ ret = 1; -+ break; -+ } -+ -+ return ret; -+} -+ -+/* This is the 3.3V supply for VDD_IO and VDD_LPREG input */ -+static void gps_power_3v3_set(int on) -+{ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ if (on) -+ pcf50606_voltage_set(pcf50606_global, -+ PCF50606_REGULATOR_DCD, 3300); -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_DCD, on); -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ s3c2410_gpio_setpin(GTA01_GPIO_GPS_EN_3V3, on); -+ break; -+ } -+} -+ -+static int gps_power_3v3_get(void) -+{ -+ int ret = 0; -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ if (pcf50606_onoff_get(pcf50606_global, -+ PCF50606_REGULATOR_DCD) && -+ pcf50606_voltage_get(pcf50606_global, -+ PCF50606_REGULATOR_DCD) == 3300) -+ ret = 1; -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_EN_3V3)) -+ ret = 1; -+ break; -+ } -+ -+ return ret; -+} -+ -+/* This is the 2.5V supply for VDD_PLLREG and VDD_COREREG input */ -+static void gps_power_2v5_set(int on) -+{ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ /* This is CORE_1V8 and cannot be disabled */ -+ break; -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ if (on) -+ pcf50606_voltage_set(pcf50606_global, -+ PCF50606_REGULATOR_D2REG, 2500); -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_D2REG, on); -+ break; -+ } -+} -+ -+static int gps_power_2v5_get(void) -+{ -+ int ret = 0; -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ /* This is CORE_1V8 and cannot be disabled */ -+ ret = 1; -+ break; -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ if (pcf50606_onoff_get(pcf50606_global, -+ PCF50606_REGULATOR_D2REG) && -+ pcf50606_voltage_get(pcf50606_global, -+ PCF50606_REGULATOR_D2REG) == 2500) -+ ret = 1; -+ break; -+ } -+ -+ return ret; -+} -+ -+/* This is the 1.5V supply for VDD_CORE */ -+static void gps_power_1v5_set(int on) -+{ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ /* This is switched via 2v5 */ -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ if (on) -+ pcf50606_voltage_set(pcf50606_global, -+ PCF50606_REGULATOR_DCD, 1500); -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_DCD, on); -+ break; -+ } -+} -+ -+static int gps_power_1v5_get(void) -+{ -+ int ret = 0; -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ /* This is switched via 2v5 */ -+ ret = 1; -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ if (pcf50606_onoff_get(pcf50606_global, -+ PCF50606_REGULATOR_DCD) && -+ pcf50606_voltage_get(pcf50606_global, -+ PCF50606_REGULATOR_DCD) == 1500) -+ ret = 1; -+ break; -+ } -+ -+ return ret; -+} -+ -+/* This is the POWERON pin */ -+static void gps_pwron_set(int on) -+{ -+ -+ neo1973_gps.power_was_on = !!on; -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ if (machine_is_neo1973_gta01()) -+ neo1973_gpb_setpin(GTA01_GPIO_GPS_PWRON, on); -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ if (machine_is_neo1973_gta02()) { -+ if (on) { -+ pcf50633_voltage_set(pcf50633_global, -+ PCF50633_REGULATOR_LDO5, 3000); -+ /* return UART pins to being UART pins */ -+ s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1); -+ /* remove pulldown now it won't be floating any more */ -+ s3c2410_gpio_pullup(S3C2410_GPH5, 0); -+ } else { -+ /* -+ * take care not to power unpowered GPS from UART TX -+ * return them to GPIO and force low -+ */ -+ s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP); -+ s3c2410_gpio_setpin(S3C2410_GPH4, 0); -+ /* don't let RX from unpowered GPS float */ -+ s3c2410_gpio_pullup(S3C2410_GPH5, 1); -+ } -+ pcf50633_onoff_set(pcf50633_global, -+ PCF50633_REGULATOR_LDO5, on); -+ } -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+} -+ -+static int gps_pwron_get(void) -+{ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ if (machine_is_neo1973_gta01()) -+ return !!s3c2410_gpio_getpin(GTA01_GPIO_GPS_PWRON); -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ if (machine_is_neo1973_gta02()) -+ return !!pcf50633_onoff_get(pcf50633_global, -+ PCF50633_REGULATOR_LDO5); -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ return -1; -+} -+ -+/* This is the nRESET pin */ -+static void gps_rst_set(int on) -+{ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ pcf50606_gpo0_set(pcf50606_global, on); -+ break; -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ s3c2410_gpio_setpin(GTA01_GPIO_GPS_RESET, on); -+ break; -+ } -+} -+ -+static int gps_rst_get(void) -+{ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ if (pcf50606_gpo0_get(pcf50606_global)) -+ return 1; -+ break; -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_RESET)) -+ return 1; -+ break; -+ } -+ -+ return 0; -+} -+ -+static ssize_t power_gps_read(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ int ret = 0; -+ -+ if (!strcmp(attr->attr.name, "power_tcxo_2v8")) { -+ ret = gps_power_2v8_get(); -+ } else if (!strcmp(attr->attr.name, "power_avdd_3v")) { -+ ret = gps_power_3v_get(); -+ } else if (!strcmp(attr->attr.name, "pwron")) { -+ ret = gps_pwron_get(); -+ } else if (!strcmp(attr->attr.name, "reset")) { -+ ret = gps_rst_get(); -+ } else if (!strcmp(attr->attr.name, "power_lp_io_3v3")) { -+ ret = gps_power_3v3_get(); -+ } else if (!strcmp(attr->attr.name, "power_pll_core_2v5")) { -+ ret = gps_power_2v5_get(); -+ } else if (!strcmp(attr->attr.name, "power_core_1v5") || -+ !strcmp(attr->attr.name, "power_vdd_core_1v5")) { -+ ret = gps_power_1v5_get(); -+ } -+ -+ if (ret) -+ return strlcpy(buf, "1\n", 3); -+ else -+ return strlcpy(buf, "0\n", 3); -+} -+ -+static ssize_t power_gps_write(struct device *dev, -+ struct device_attribute *attr, const char *buf, -+ size_t count) -+{ -+ unsigned long on = simple_strtoul(buf, NULL, 10); -+ -+ if (!strcmp(attr->attr.name, "power_tcxo_2v8")) { -+ gps_power_2v8_set(on); -+ } else if (!strcmp(attr->attr.name, "power_avdd_3v")) { -+ gps_power_3v_set(on); -+ } else if (!strcmp(attr->attr.name, "pwron")) { -+ gps_pwron_set(on); -+ } else if (!strcmp(attr->attr.name, "reset")) { -+ gps_rst_set(on); -+ } else if (!strcmp(attr->attr.name, "power_lp_io_3v3")) { -+ gps_power_3v3_set(on); -+ } else if (!strcmp(attr->attr.name, "power_pll_core_2v5")) { -+ gps_power_2v5_set(on); -+ } else if (!strcmp(attr->attr.name, "power_core_1v5") || -+ !strcmp(attr->attr.name, "power_vdd_core_1v5")) { -+ gps_power_1v5_set(on); -+ } -+ -+ return count; -+} -+ -+static void gps_power_sequence_up(void) -+{ -+ /* According to PMB2520 Data Sheet, Rev. 2006-06-05, -+ * Chapter 4.2.2 */ -+ -+ /* nRESET must be asserted low */ -+ gps_rst_set(0); -+ -+ /* POWERON must be de-asserted (low) */ -+ gps_pwron_set(0); -+ -+ /* Apply VDD_IO and VDD_LPREG_IN */ -+ gps_power_3v3_set(1); -+ -+ /* VDD_COREREG_IN, VDD_PLLREG_IN */ -+ gps_power_1v5_set(1); -+ gps_power_2v5_set(1); -+ -+ /* and VDD_RF may be applied */ -+ gps_power_2v8_set(1); -+ -+ /* We need to enable AVDD, since in GTA01Bv3 it is -+ * shared with RFREG_IN */ -+ gps_power_3v_set(1); -+ -+ msleep(3); /* Is 3ms enough? */ -+ -+ /* De-asert nRESET */ -+ gps_rst_set(1); -+ -+ /* Switch power on */ -+ gps_pwron_set(1); -+ -+} -+ -+static void gps_power_sequence_down(void) -+{ -+ /* According to PMB2520 Data Sheet, Rev. 2006-06-05, -+ * Chapter 4.2.3.1 */ -+ gps_pwron_set(0); -+ -+ /* Don't disable AVDD before PWRON is cleared, since -+ * in GTA01Bv3, AVDD and RFREG_IN are shared */ -+ gps_power_3v_set(0); -+ -+ /* Remove VDD_COREREG_IN, VDD_PLLREG_IN and VDD_REFREG_IN */ -+ gps_power_1v5_set(0); -+ gps_power_2v5_set(0); -+ gps_power_2v8_set(0); -+ -+ /* Remove VDD_LPREG_IN and VDD_IO */ -+ gps_power_3v3_set(0); -+} -+ -+ -+static ssize_t power_sequence_read(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ return strlcpy(buf, "power_up power_down\n", PAGE_SIZE); -+} -+ -+static ssize_t power_sequence_write(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dev_dbg(dev, "wrote: '%s'\n", buf); -+ -+ if (!strncmp(buf, "power_up", 8)) -+ gps_power_sequence_up(); -+ else if (!strncmp(buf, "power_down", 10)) -+ gps_power_sequence_down(); -+ else -+ return -EINVAL; -+ -+ return count; -+} -+ -+static DEVICE_ATTR(power_tcxo_2v8, 0644, power_gps_read, power_gps_write); -+static DEVICE_ATTR(power_avdd_3v, 0644, power_gps_read, power_gps_write); -+static DEVICE_ATTR(pwron, 0644, power_gps_read, power_gps_write); -+static DEVICE_ATTR(reset, 0644, power_gps_read, power_gps_write); -+static DEVICE_ATTR(power_lp_io_3v3, 0644, power_gps_read, power_gps_write); -+static DEVICE_ATTR(power_pll_core_2v5, 0644, power_gps_read, power_gps_write); -+static DEVICE_ATTR(power_core_1v5, 0644, power_gps_read, power_gps_write); -+static DEVICE_ATTR(power_vdd_core_1v5, 0644, power_gps_read, power_gps_write); -+static DEVICE_ATTR(power_sequence, 0644, power_sequence_read, -+ power_sequence_write); -+ -+#ifdef CONFIG_PM -+static int gta01_pm_gps_suspend(struct platform_device *pdev, -+ pm_message_t state) -+{ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ if (machine_is_neo1973_gta01()) { -+ /* FIXME */ -+ gps_power_sequence_down(); -+ } -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ if (machine_is_neo1973_gta02()) -+ gps_pwron_set(0); -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ -+ return 0; -+} -+ -+static int gta01_pm_gps_resume(struct platform_device *pdev) -+{ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ if (machine_is_neo1973_gta01()) -+ if (neo1973_gps.power_was_on) -+ gps_power_sequence_up(); -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ if (machine_is_neo1973_gta02()) -+ if (neo1973_gps.power_was_on) -+ gps_pwron_set(1); -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ -+ return 0; -+} -+#else -+#define gta01_pm_gps_suspend NULL -+#define gta01_pm_gps_resume NULL -+#endif -+ -+static struct attribute *gta01_gps_sysfs_entries[] = { -+ &dev_attr_power_avdd_3v.attr, -+ &dev_attr_pwron.attr, -+ &dev_attr_reset.attr, -+ &dev_attr_power_lp_io_3v3.attr, -+ &dev_attr_power_pll_core_2v5.attr, -+ &dev_attr_power_sequence.attr, -+ NULL, /* power_core_1v5 */ -+ NULL, /* power_vdd_core_1v5 */ -+ NULL /* terminating entry */ -+}; -+ -+static struct attribute_group gta01_gps_attr_group = { -+ .name = NULL, -+ .attrs = gta01_gps_sysfs_entries, -+}; -+ -+static struct attribute *gta02_gps_sysfs_entries[] = { -+ &dev_attr_pwron.attr, -+ NULL -+}; -+ -+static struct attribute_group gta02_gps_attr_group = { -+ .name = NULL, -+ .attrs = gta02_gps_sysfs_entries, -+}; -+ -+static int __init gta01_pm_gps_probe(struct platform_device *pdev) -+{ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ if (machine_is_neo1973_gta01()) { -+ s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_PWRON, S3C2410_GPIO_OUTPUT); -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ break; -+ case GTA01v4_SYSTEM_REV: -+ s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_RESET, S3C2410_GPIO_OUTPUT); -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_EN_3V3, S3C2410_GPIO_OUTPUT); -+ /* fallthrough */ -+ case GTA01Bv2_SYSTEM_REV: -+ s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_EN_2V8, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_EN_3V, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_cfgpin(GTA01_GPIO_GPS_RESET, S3C2410_GPIO_OUTPUT); -+ break; -+ default: -+ dev_warn(&pdev->dev, "Unknown GTA01 Revision 0x%x, " -+ "AGPS PM features not available!!!\n", -+ system_rev); -+ return -1; -+ break; -+ } -+ -+ gps_power_sequence_down(); -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ gta01_gps_sysfs_entries[ARRAY_SIZE(gta01_gps_sysfs_entries)-3] = -+ &dev_attr_power_tcxo_2v8.attr; -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ gta01_gps_sysfs_entries[ARRAY_SIZE(gta01_gps_sysfs_entries)-3] = -+ &dev_attr_power_core_1v5.attr; -+ gta01_gps_sysfs_entries[ARRAY_SIZE(gta01_gps_sysfs_entries)-2] = -+ &dev_attr_power_vdd_core_1v5.attr; -+ break; -+ } -+ -+ return sysfs_create_group(&pdev->dev.kobj, >a01_gps_attr_group); -+ } -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ if (machine_is_neo1973_gta02()) { -+ switch (system_rev) { -+ case GTA02v2_SYSTEM_REV: -+ case GTA02v3_SYSTEM_REV: -+ case GTA02v4_SYSTEM_REV: -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ pcf50633_voltage_set(pcf50633_global, -+ PCF50633_REGULATOR_LDO5, 3000); -+ pcf50633_onoff_set(pcf50633_global, -+ PCF50633_REGULATOR_LDO5, 0); -+ dev_info(&pdev->dev, "FIC Neo1973 GPS Power Managerment:" -+ "starting\n"); -+ break; -+ default: -+ dev_warn(&pdev->dev, "Unknown GTA02 Revision 0x%x, " -+ "AGPS PM features not available!!!\n", -+ system_rev); -+ return -1; -+ break; -+ } -+ return sysfs_create_group(&pdev->dev.kobj, >a02_gps_attr_group); -+ } -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ return -1; -+} -+ -+static int gta01_pm_gps_remove(struct platform_device *pdev) -+{ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ if (machine_is_neo1973_gta01()) { -+ gps_power_sequence_down(); -+ sysfs_remove_group(&pdev->dev.kobj, >a01_gps_attr_group); -+ } -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ if (machine_is_neo1973_gta02()) { -+ pcf50633_onoff_set(pcf50633_global, PCF50633_REGULATOR_LDO5, 0); -+ sysfs_remove_group(&pdev->dev.kobj, >a02_gps_attr_group); -+ } -+#endif /* CONFIG_MACH_NEO1973_GTA02 */ -+ return 0; -+} -+ -+static struct platform_driver gta01_pm_gps_driver = { -+ .probe = gta01_pm_gps_probe, -+ .remove = gta01_pm_gps_remove, -+ .suspend = gta01_pm_gps_suspend, -+ .resume = gta01_pm_gps_resume, -+ .driver = { -+ .name = "neo1973-pm-gps", -+ }, -+}; -+ -+static int __devinit gta01_pm_gps_init(void) -+{ -+ return platform_driver_register(>a01_pm_gps_driver); -+} -+ -+static void gta01_pm_gps_exit(void) -+{ -+ platform_driver_unregister(>a01_pm_gps_driver); -+} -+ -+module_init(gta01_pm_gps_init); -+module_exit(gta01_pm_gps_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION("FIC Neo1973 GPS Power Management"); -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_gps.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_gps.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1 @@ -+extern int neo1973_pm_gps_is_on(void); -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,373 @@ -+/* -+ * GSM Management code for the FIC Neo1973 GSM Phone -+ * -+ * (C) 2007 by Openmoko Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+#include -+#include -+#include -+#endif -+ -+int gta_gsm_interrupts; -+EXPORT_SYMBOL(gta_gsm_interrupts); -+ -+struct gta01pm_priv { -+ int gpio_ngsm_en; -+ int gpio_ndl_gsm; -+ -+ struct console *con; -+}; -+ -+struct resume_dependency resume_dep_gsm_uart; -+ -+static struct gta01pm_priv gta01_gsm; -+ -+static struct console *find_s3c24xx_console(void) -+{ -+ struct console *con; -+ -+ acquire_console_sem(); -+ -+ for (con = console_drivers; con; con = con->next) { -+ if (!strcmp(con->name, "ttySAC")) -+ break; -+ } -+ -+ release_console_sem(); -+ -+ return con; -+} -+ -+static ssize_t gsm_read(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ if (!strcmp(attr->attr.name, "power_on")) { -+ if (s3c2410_gpio_getpin(GTA01_GPIO_MODEM_ON)) -+ goto out_1; -+ } else if (!strcmp(attr->attr.name, "reset")) { -+ if (machine_is_neo1973_gta01() && s3c2410_gpio_getpin(GTA01_GPIO_MODEM_RST)) -+ goto out_1; -+ else if (machine_is_neo1973_gta02() && s3c2410_gpio_getpin(GTA02_GPIO_MODEM_RST)) -+ goto out_1; -+ } else if (!strcmp(attr->attr.name, "download")) { -+ if (machine_is_neo1973_gta01()) { -+ if (s3c2410_gpio_getpin(GTA01_GPIO_MODEM_DNLOAD)) -+ goto out_1; -+ } else if (machine_is_neo1973_gta02()) { -+ if (!s3c2410_gpio_getpin(GTA02_GPIO_nDL_GSM)) -+ goto out_1; -+ } -+ } else if (!strcmp(attr->attr.name, "flowcontrolled")) { -+ if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT) -+ goto out_1; -+ } -+ -+ return strlcpy(buf, "0\n", 3); -+out_1: -+ return strlcpy(buf, "1\n", 3); -+} -+ -+static ssize_t gsm_write(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ unsigned long on = simple_strtoul(buf, NULL, 10); -+ -+ if (!strcmp(attr->attr.name, "power_on")) { -+ if (on) { -+ if (gta01_gsm.con) { -+ dev_dbg(dev, "powering up GSM, thus " -+ "disconnecting serial console\n"); -+ -+ console_stop(gta01_gsm.con); -+ s3c24xx_serial_console_set_silence(1); -+ } -+ -+ if (gta01_gsm.gpio_ngsm_en) -+ s3c2410_gpio_setpin(gta01_gsm.gpio_ngsm_en, 0); -+ -+ switch (system_rev) { -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ case GTA02v2_SYSTEM_REV: -+ case GTA02v3_SYSTEM_REV: -+ case GTA02v4_SYSTEM_REV: -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ pcf50633_gpio_set(pcf50633_global, -+ PCF50633_GPIO2, 1); -+ break; -+#endif -+ } -+ -+ neo1973_gpb_setpin(GTA01_GPIO_MODEM_ON, 1); -+ } else { -+ neo1973_gpb_setpin(GTA01_GPIO_MODEM_ON, 0); -+ -+ switch (system_rev) { -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ case GTA02v2_SYSTEM_REV: -+ case GTA02v3_SYSTEM_REV: -+ case GTA02v4_SYSTEM_REV: -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ pcf50633_gpio_set(pcf50633_global, -+ PCF50633_GPIO2, 0); -+ break; -+#endif -+ } -+ -+ if (gta01_gsm.gpio_ngsm_en) -+ s3c2410_gpio_setpin(gta01_gsm.gpio_ngsm_en, 1); -+ -+ if (gta01_gsm.con) { -+ s3c24xx_serial_console_set_silence(0); -+ console_start(gta01_gsm.con); -+ -+ dev_dbg(dev, "powered down GSM, thus enabling " -+ "serial console\n"); -+ } -+ } -+ } else if (!strcmp(attr->attr.name, "reset")) { -+ if (machine_is_neo1973_gta01()) -+ neo1973_gpb_setpin(GTA01_GPIO_MODEM_RST, on); -+ else if (machine_is_neo1973_gta02()) -+ neo1973_gpb_setpin(GTA02_GPIO_MODEM_RST, on); -+ } else if (!strcmp(attr->attr.name, "download")) { -+ if (machine_is_neo1973_gta01()) -+ s3c2410_gpio_setpin(GTA01_GPIO_MODEM_DNLOAD, on); -+ -+ if (machine_is_neo1973_gta02()) { -+ /* -+ * the keyboard / buttons driver requests and enables -+ * the JACK_INSERT IRQ. We have to take care about -+ * not enabling and disabling the IRQ when it was -+ * already in that state or we get "unblanaced IRQ" -+ * kernel warnings and stack dumps. So we use the -+ * copy of the ndl_gsm state to figure out if we should -+ * enable or disable the jack interrupt -+ */ -+ if (on) { -+ if (gta01_gsm.gpio_ndl_gsm) -+ disable_irq(gpio_to_irq( -+ GTA02_GPIO_JACK_INSERT)); -+ } else { -+ if (!gta01_gsm.gpio_ndl_gsm) -+ enable_irq(gpio_to_irq( -+ GTA02_GPIO_JACK_INSERT)); -+ } -+ -+ gta01_gsm.gpio_ndl_gsm = !on; -+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, !on); -+ } -+ } else if (!strcmp(attr->attr.name, "flowcontrolled")) { -+ if (on) { -+ gta_gsm_interrupts = 0; -+ s3c2410_gpio_setpin(S3C2410_GPH1, 1); -+ s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP); -+ } else -+ s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0); -+ } -+ -+ return count; -+} -+ -+static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write); -+static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write); -+static DEVICE_ATTR(download, 0644, gsm_read, gsm_write); -+static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write); -+ -+#ifdef CONFIG_PM -+static int gta01_gsm_resume(struct platform_device *pdev); -+static int gta01_gsm_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we -+ * don't need to do much here. */ -+ -+ /* If flowcontrol asserted, abort if GSM already interrupted */ -+ if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT) { -+ if (gta_gsm_interrupts) -+ goto busy; -+ } -+ -+ /* disable DL GSM to prevent jack_insert becoming 'floating' */ -+ if (machine_is_neo1973_gta02()) -+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1); -+ -+ /* register our resume dependency on the appropriate UART being up */ -+ resume_dep_gsm_uart.callback = gta01_gsm_resume; -+ resume_dep_gsm_uart.context = (void *)pdev; -+ -+ s3c24xx_serial_register_resume_dependency(&resume_dep_gsm_uart, 0); -+ -+ return 0; -+ -+busy: -+ return -EBUSY; -+} -+ -+static int -+gta01_gsm_suspend_late(struct platform_device *pdev, pm_message_t state) -+{ -+ /* Last chance: abort if GSM already interrupted */ -+ if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT) { -+ if (gta_gsm_interrupts) -+ return -EBUSY; -+ } -+ return 0; -+} -+ -+static int gta01_gsm_resume(struct platform_device *pdev) -+{ -+ if (resume_dep_gsm_uart.called_flag != 1) -+ return 0; -+ -+ resume_dep_gsm_uart.called_flag++; /* only run once */ -+ -+ /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we -+ * don't need to do much here. */ -+ -+ /* Make sure that the kernel console on the serial port is still -+ * disabled. FIXME: resume ordering race with serial driver! */ -+ if (gta01_gsm.con && s3c2410_gpio_getpin(GTA01_GPIO_MODEM_ON)) -+ console_stop(gta01_gsm.con); -+ -+ if (machine_is_neo1973_gta02()) -+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, gta01_gsm.gpio_ndl_gsm); -+ -+ return 0; -+} -+#else -+#define gta01_gsm_suspend NULL -+#define gta01_gsm_suspend_late NULL -+#define gta01_gsm_resume NULL -+#endif -+ -+static struct attribute *gta01_gsm_sysfs_entries[] = { -+ &dev_attr_power_on.attr, -+ &dev_attr_reset.attr, -+ &dev_attr_download.attr, -+ &dev_attr_flowcontrolled.attr, -+ NULL -+}; -+ -+static struct attribute_group gta01_gsm_attr_group = { -+ .name = NULL, -+ .attrs = gta01_gsm_sysfs_entries, -+}; -+ -+static int __init gta01_gsm_probe(struct platform_device *pdev) -+{ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ gta01_gsm.gpio_ngsm_en = GTA01v3_GPIO_nGSM_EN; -+ break; -+ case GTA01v4_SYSTEM_REV: -+ gta01_gsm.gpio_ngsm_en = 0; -+ break; -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ gta01_gsm.gpio_ngsm_en = GTA01Bv2_GPIO_nGSM_EN; -+ s3c2410_gpio_setpin(GTA01v3_GPIO_nGSM_EN, 0); -+ break; -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ case GTA02v1_SYSTEM_REV: -+ case GTA02v2_SYSTEM_REV: -+ case GTA02v3_SYSTEM_REV: -+ case GTA02v4_SYSTEM_REV: -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ gta01_gsm.gpio_ngsm_en = 0; -+ break; -+#endif -+ default: -+ dev_warn(&pdev->dev, "Unknown Neo1973 Revision 0x%x, " -+ "some PM features not available!!!\n", -+ system_rev); -+ break; -+ } -+ -+ switch (system_rev) { -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ gta01_gsm_sysfs_entries[ARRAY_SIZE(gta01_gsm_sysfs_entries)-2] = -+ &dev_attr_download.attr; -+ break; -+ default: -+ break; -+ } -+ -+ if (machine_is_neo1973_gta01()) { -+ gta01_gsm.con = find_s3c24xx_console(); -+ if (!gta01_gsm.con) -+ dev_warn(&pdev->dev, -+ "cannot find S3C24xx console driver\n"); -+ } else -+ gta01_gsm.con = NULL; -+ -+ /* note that download initially disabled, and enforce that */ -+ gta01_gsm.gpio_ndl_gsm = 1; -+ if (machine_is_neo1973_gta02()) -+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1); -+ -+ init_resume_dependency_list(&resume_dep_gsm_uart); -+ -+ return sysfs_create_group(&pdev->dev.kobj, >a01_gsm_attr_group); -+} -+ -+static int gta01_gsm_remove(struct platform_device *pdev) -+{ -+ sysfs_remove_group(&pdev->dev.kobj, >a01_gsm_attr_group); -+ -+ return 0; -+} -+ -+static struct platform_driver gta01_gsm_driver = { -+ .probe = gta01_gsm_probe, -+ .remove = gta01_gsm_remove, -+ .suspend = gta01_gsm_suspend, -+ .suspend_late = gta01_gsm_suspend_late, -+ .resume = gta01_gsm_resume, -+ .driver = { -+ .name = "neo1973-pm-gsm", -+ }, -+}; -+ -+static int __devinit gta01_gsm_init(void) -+{ -+ return platform_driver_register(>a01_gsm_driver); -+} -+ -+static void gta01_gsm_exit(void) -+{ -+ platform_driver_unregister(>a01_gsm_driver); -+} -+ -+module_init(gta01_gsm_init); -+module_exit(gta01_gsm_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION("FIC Neo1973 GSM Power Management"); -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_host.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_host.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,101 @@ -+/* -+ * Bluetooth PM code for the FIC Neo1973 GSM Phone -+ * -+ * (C) 2007 by Openmoko Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+#include -+#include -+ -+static ssize_t pm_host_read(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ return sprintf(buf, "%d\n", -+ pcf50633_gpio_get(pcf50633_global, PCF50633_GPO)); -+} -+ -+static ssize_t pm_host_write(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ unsigned long on = simple_strtoul(buf, NULL, 10); -+ -+ pcf50633_gpio_set(pcf50633_global, PCF50633_GPO, on); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(hostmode, 0644, pm_host_read, pm_host_write); -+ -+static struct attribute *neo1973_pm_host_sysfs_entries[] = { -+ &dev_attr_hostmode.attr, -+ NULL -+}; -+ -+static struct attribute_group neo1973_pm_host_attr_group = { -+ .name = NULL, -+ .attrs = neo1973_pm_host_sysfs_entries, -+}; -+ -+static int __init neo1973_pm_host_probe(struct platform_device *pdev) -+{ -+ dev_info(&pdev->dev, "starting\n"); -+ -+ switch (machine_arch_type) { -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ case MACH_TYPE_NEO1973_GTA01: -+ return -EINVAL; -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ default: -+ break; -+ } -+ -+ return sysfs_create_group(&pdev->dev.kobj, &neo1973_pm_host_attr_group); -+} -+ -+static int neo1973_pm_host_remove(struct platform_device *pdev) -+{ -+ sysfs_remove_group(&pdev->dev.kobj, &neo1973_pm_host_attr_group); -+ return 0; -+} -+ -+static struct platform_driver neo1973_pm_host_driver = { -+ .probe = neo1973_pm_host_probe, -+ .remove = neo1973_pm_host_remove, -+ .driver = { -+ .name = "neo1973-pm-host", -+ }, -+}; -+ -+static int __devinit neo1973_pm_host_init(void) -+{ -+ return platform_driver_register(&neo1973_pm_host_driver); -+} -+ -+static void neo1973_pm_host_exit(void) -+{ -+ platform_driver_unregister(&neo1973_pm_host_driver); -+} -+ -+module_init(neo1973_pm_host_init); -+module_exit(neo1973_pm_host_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Andy Green "); -+MODULE_DESCRIPTION("Neo1973 USB Host Power Management"); -+#endif -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_resume_reason.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_pm_resume_reason.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,147 @@ -+/* -+ * Resume reason sysfs for the FIC Neo1973 GSM Phone -+ * -+ * (C) 2008 by Openmoko Inc. -+ * Author: Andy Green -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License resume_reason 2 as -+ * published by the Free Software Foundation -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+#include -+#include -+#endif -+ -+static unsigned int *gstatus4_mapped; -+static char *resume_reasons[][17] = { { /* GTA01 */ -+ "EINT00_NULL", -+ "EINT01_GSM", -+ "EINT02_NULL", -+ "EINT03_NULL", -+ "EINT04_JACK", -+ "EINT05_SDCARD", -+ "EINT06_AUXKEY", -+ "EINT07_HOLDKEY", -+ "EINT08_NULL", -+ "EINT09_NULL", -+ "EINT10_NULL", -+ "EINT11_NULL", -+ "EINT12_NULL", -+ "EINT13_NULL", -+ "EINT14_NULL", -+ "EINT15_NULL", -+ NULL -+}, { /* GTA02 */ -+ "EINT00_ACCEL1", -+ "EINT01_GSM", -+ "EINT02_BLUETOOTH", -+ "EINT03_DEBUGBRD", -+ "EINT04_JACK", -+ "EINT05_WLAN", -+ "EINT06_AUXKEY", -+ "EINT07_HOLDKEY", -+ "EINT08_ACCEL2", -+ "EINT09_PMU", -+ "EINT10_NULL", -+ "EINT11_NULL", -+ "EINT12_GLAMO", -+ "EINT13_NULL", -+ "EINT14_NULL", -+ "EINT15_NULL", -+ NULL -+} }; -+ -+static ssize_t resume_reason_read(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ int bit = 0; -+ char *end = buf; -+ int gta = !!machine_is_neo1973_gta02(); -+ -+ for (bit = 0; resume_reasons[gta][bit]; bit++) { -+ if ((*gstatus4_mapped) & (1 << bit)) -+ end += sprintf(end, "* %s\n", resume_reasons[gta][bit]); -+ else -+ end += sprintf(end, " %s\n", resume_reasons[gta][bit]); -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+ if ((gta) && (bit == 9)) /* PMU */ -+ end += pcf50633_report_resumers(pcf50633_global, end); -+#endif -+ } -+ -+ return end - buf; -+} -+ -+ -+static DEVICE_ATTR(resume_reason, 0644, resume_reason_read, NULL); -+ -+static struct attribute *neo1973_resume_reason_sysfs_entries[] = { -+ &dev_attr_resume_reason.attr, -+ NULL -+}; -+ -+static struct attribute_group neo1973_resume_reason_attr_group = { -+ .name = NULL, -+ .attrs = neo1973_resume_reason_sysfs_entries, -+}; -+ -+static int __init neo1973_resume_reason_probe(struct platform_device *pdev) -+{ -+ dev_info(&pdev->dev, "starting\n"); -+ -+ gstatus4_mapped = ioremap(0x560000BC /* GSTATUS4 */, 0x4); -+ if (!gstatus4_mapped) { -+ dev_err(&pdev->dev, "failed to ioremap() memory region\n"); -+ return -EINVAL; -+ } -+ -+ return sysfs_create_group(&pdev->dev.kobj, -+ &neo1973_resume_reason_attr_group); -+} -+ -+static int neo1973_resume_reason_remove(struct platform_device *pdev) -+{ -+ sysfs_remove_group(&pdev->dev.kobj, &neo1973_resume_reason_attr_group); -+ iounmap(gstatus4_mapped); -+ return 0; -+} -+ -+static struct platform_driver neo1973_resume_reason_driver = { -+ .probe = neo1973_resume_reason_probe, -+ .remove = neo1973_resume_reason_remove, -+ .driver = { -+ .name = "neo1973-resume", -+ }, -+}; -+ -+static int __devinit neo1973_resume_reason_init(void) -+{ -+ return platform_driver_register(&neo1973_resume_reason_driver); -+} -+ -+static void neo1973_resume_reason_exit(void) -+{ -+ platform_driver_unregister(&neo1973_resume_reason_driver); -+} -+ -+module_init(neo1973_resume_reason_init); -+module_exit(neo1973_resume_reason_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Andy Green "); -+MODULE_DESCRIPTION("Neo1973 resume_reason"); -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_shadow.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_shadow.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,86 @@ -+/* -+ * include/asm-arm/plat-s3c24xx/neo1973.h -+ * -+ * Common utility code for GTA01 and GTA02 -+ * -+ * Copyright (C) 2008 by Openmoko, Inc. -+ * Author: Holger Hans Peter Freyther -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+ -+#include -+#include -+ -+/** -+ * Shadow GPIO bank B handling. For the LEDs we need to keep track of the state -+ * in software. The s3c2410_gpio_setpin must not be used for GPIOs on bank B -+ */ -+static unsigned long gpb_mask; -+static unsigned long gpb_state; -+ -+void neo1973_gpb_add_shadow_gpio(unsigned int gpio) -+{ -+ unsigned long offset = S3C2410_GPIO_OFFSET(gpio); -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ gpb_mask |= 1L << offset; -+ local_irq_restore(flags); -+} -+EXPORT_SYMBOL(neo1973_gpb_add_shadow_gpio); -+ -+static void set_shadow_gpio(unsigned long offset, unsigned int value) -+{ -+ unsigned long state = value != 0; -+ -+ gpb_state &= ~(1L << offset); -+ gpb_state |= state << offset; -+} -+ -+void neo1973_gpb_setpin(unsigned int pin, unsigned to) -+{ -+ void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB0); -+ unsigned long offset = S3C2410_GPIO_OFFSET(pin); -+ unsigned long flags; -+ unsigned long dat; -+ -+ BUG_ON(base != S3C24XX_GPIO_BASE(pin)); -+ -+ local_irq_save(flags); -+ dat = __raw_readl(base + 0x04); -+ -+ /* Add the shadow values */ -+ dat &= ~gpb_mask; -+ dat |= gpb_state; -+ -+ /* Do the operation like s3c2410_gpio_setpin */ -+ dat &= ~(1L << offset); -+ dat |= to << offset; -+ -+ /* Update the shadow state */ -+ if ((1L << offset) & gpb_mask) -+ set_shadow_gpio(offset, to); -+ -+ __raw_writel(dat, base + 0x04); -+ local_irq_restore(flags); -+} -+EXPORT_SYMBOL(neo1973_gpb_setpin); -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_version.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/neo1973_version.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,90 @@ -+/* -+ * PCB version sysfs for the FIC Neo1973 GSM Phone -+ * -+ * (C) 2007 by Openmoko Inc. -+ * Author: Andy Green -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#ifdef CONFIG_MACH_NEO1973_GTA02 -+#include -+ -+static ssize_t version_read(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ return sprintf(buf, "0x%03X\n", gta02_get_pcb_revision()); -+} -+ -+ -+static DEVICE_ATTR(pcb, 0644, version_read, NULL); -+ -+static struct attribute *neo1973_version_sysfs_entries[] = { -+ &dev_attr_pcb.attr, -+ NULL -+}; -+ -+static struct attribute_group neo1973_version_attr_group = { -+ .name = NULL, -+ .attrs = neo1973_version_sysfs_entries, -+}; -+ -+static int __init neo1973_version_probe(struct platform_device *pdev) -+{ -+ dev_info(&pdev->dev, "starting\n"); -+ -+ switch (machine_arch_type) { -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ case MACH_TYPE_NEO1973_GTA01: -+ return -EINVAL; -+#endif /* CONFIG_MACH_NEO1973_GTA01 */ -+ default: -+ break; -+ } -+ -+ return sysfs_create_group(&pdev->dev.kobj, &neo1973_version_attr_group); -+} -+ -+static int neo1973_version_remove(struct platform_device *pdev) -+{ -+ sysfs_remove_group(&pdev->dev.kobj, &neo1973_version_attr_group); -+ return 0; -+} -+ -+static struct platform_driver neo1973_version_driver = { -+ .probe = neo1973_version_probe, -+ .remove = neo1973_version_remove, -+ .driver = { -+ .name = "neo1973-version", -+ }, -+}; -+ -+static int __devinit neo1973_version_init(void) -+{ -+ return platform_driver_register(&neo1973_version_driver); -+} -+ -+static void neo1973_version_exit(void) -+{ -+ platform_driver_unregister(&neo1973_version_driver); -+} -+ -+module_init(neo1973_version_init); -+module_exit(neo1973_version_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Andy Green "); -+MODULE_DESCRIPTION("Neo1973 PCB version"); -+#endif -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/pm.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c24xx/pm.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/pm.c 2008-12-11 22:46:49.000000000 +0100 -@@ -169,8 +169,15 @@ static void s3c2410_pm_debug_init(void) - } - - #define DBG(fmt...) pm_dbg(fmt) -+#define RESTORE_DBG(fmt...) printk(KERN_DEBUG fmt) - #else -+#if 0 - #define DBG(fmt...) printk(KERN_DEBUG fmt) -+#define RESTORE_DBG(fmt...) printk(KERN_DEBUG fmt) -+#else -+#define DBG(fmt...) do { } while (0) -+#define RESTORE_DBG(fmt...) do { } while (0) -+#endif - - #define s3c2410_pm_debug_init() do { } while(0) - -@@ -392,7 +399,7 @@ void s3c2410_pm_do_save(struct sleep_sav - void s3c2410_pm_do_restore(struct sleep_save *ptr, int count) - { - for (; count > 0; count--, ptr++) { -- printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", -+ RESTORE_DBG("restore %p (restore %08lx, was %08x)\n", - ptr->reg, ptr->val, __raw_readl(ptr->reg)); - - __raw_writel(ptr->val, ptr->reg); -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/s3c244x.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c24xx/s3c244x.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/s3c244x.c 2008-12-11 22:46:49.000000000 +0100 -@@ -67,6 +67,7 @@ void __init s3c244x_map_io(struct map_de - - s3c_device_i2c.name = "s3c2440-i2c"; - s3c_device_nand.name = "s3c2440-nand"; -+ s3c_device_ts.name = "s3c2440-ts"; - s3c_device_usbgadget.name = "s3c2440-usbgadget"; - } - -Index: linux-2.6.24.7/arch/arm/plat-s3c24xx/time.c -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/plat-s3c24xx/time.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/arch/arm/plat-s3c24xx/time.c 2008-12-11 22:46:49.000000000 +0100 -@@ -3,6 +3,8 @@ - * Copyright (C) 2003-2005 Simtec Electronics - * Ben Dooks, - * -+ * dyn_tick support by Andrzej Zaborowski based on omap_dyn_tick_timer. -+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or -@@ -42,6 +44,10 @@ - - static unsigned long timer_startval; - static unsigned long timer_usec_ticks; -+static struct work_struct resume_work; -+ -+unsigned long pclk; -+struct clk *clk; - - #define TIMER_USEC_SHIFT 16 - -@@ -179,11 +185,7 @@ static void s3c2410_timer_setup (void) - tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; - tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; - } else { -- unsigned long pclk; -- struct clk *clk; -- -- /* for the h1940 (and others), we use the pclk from the core -- * to generate the timer values. since values around 50 to -+ /* since values around 50 to - * 70MHz are not values we can directly generate the timer - * value from, we need to pre-scale and divide before using it. - * -@@ -191,19 +193,9 @@ static void s3c2410_timer_setup (void) - * (8.45 ticks per usec) - */ - -- /* this is used as default if no other timer can be found */ -- -- clk = clk_get(NULL, "timers"); -- if (IS_ERR(clk)) -- panic("failed to get clock for system timer"); -- -- clk_enable(clk); -- -- pclk = clk_get_rate(clk); -- - /* configure clock tick */ -- - timer_usec_ticks = timer_mask_usec_ticks(6, pclk); -+ printk("timer_usec_ticks = %lu\n", timer_usec_ticks); - - tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; - tcfg1 |= S3C2410_TCFG1_MUX4_DIV2; -@@ -247,16 +239,244 @@ static void s3c2410_timer_setup (void) - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - __raw_writel(tcon, S3C2410_TCON); -+ -+ __raw_writel(__raw_readl(S3C2410_INTMSK) & (~(1UL << 14)), -+ S3C2410_INTMSK); -+ -+} -+ -+struct sys_timer s3c24xx_timer; -+static void timer_resume_work(struct work_struct *work) -+{ -+ clk_enable(clk); -+ -+#ifdef CONFIG_NO_IDLE_HZ -+ if (s3c24xx_timer.dyn_tick->state & DYN_TICK_ENABLED) -+ s3c24xx_timer.dyn_tick->enable(); -+ else -+#endif -+ s3c2410_timer_setup(); - } - - static void __init s3c2410_timer_init (void) - { -+ if (!use_tclk1_12()) { -+ /* for the h1940 (and others), we use the pclk from the core -+ * to generate the timer values. -+ */ -+ -+ /* this is used as default if no other timer can be found */ -+ clk = clk_get(NULL, "timers"); -+ if (IS_ERR(clk)) -+ panic("failed to get clock for system timer"); -+ -+ clk_enable(clk); -+ -+ pclk = clk_get_rate(clk); -+ printk("pclk = %lu\n", pclk); -+ } -+ -+ INIT_WORK(&resume_work, timer_resume_work); - s3c2410_timer_setup(); - setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); - } - -+static void s3c2410_timer_resume_work(struct work_struct *work) -+{ -+ s3c2410_timer_setup(); -+} -+ -+static void s3c2410_timer_resume(void) -+{ -+ static DECLARE_WORK(work, s3c2410_timer_resume_work); -+ int res; -+ -+ res = schedule_work(&work); -+ if (!res) -+ printk(KERN_ERR -+ "s3c2410_timer_resume_work already queued ???\n"); -+} -+ -+#ifdef CONFIG_NO_IDLE_HZ -+/* -+ * We'll set a constant prescaler so we don't have to bother setting it -+ * when reprogramming and so that we avoid costly divisions. -+ * -+ * (2 * HZ) << INPUT_FREQ_SHIFT is the desired frequency after prescaler. -+ * At HZ == 200, HZ * 1024 should work for PCLKs of up to ~53.5 MHz. -+ */ -+#define INPUT_FREQ_SHIFT 9 -+ -+static int ticks_last; -+static int ticks_left; -+static uint32_t tcnto_last; -+ -+static inline int s3c24xx_timer_read(void) -+{ -+ uint32_t tcnto = __raw_readl(S3C2410_TCNTO(4)); -+ -+ /* -+ * WARNING: sometimes we get called before TCNTB has been -+ * loaded into the counter and TCNTO then returns its previous -+ * value and kill us, so don't do anything before counter is -+ * reloaded. -+ */ -+ if (unlikely(tcnto == tcnto_last)) -+ return ticks_last; -+ -+ tcnto_last = -1; -+ return tcnto << -+ ((__raw_readl(S3C2410_TCFG1) >> S3C2410_TCFG1_MUX4_SHIFT) & 3); -+} -+ -+static inline void s3c24xx_timer_program(int ticks) -+{ -+ uint32_t tcon = __raw_readl(S3C2410_TCON) & ~(7 << 20); -+ uint32_t tcfg1 = __raw_readl(S3C2410_TCFG1) & ~S3C2410_TCFG1_MUX4_MASK; -+ -+ /* Just make sure the timer is stopped. */ -+ __raw_writel(tcon, S3C2410_TCON); -+ -+ /* TODO: add likely()ies / unlikely()ies */ -+ if (ticks >> 18) { -+ ticks_last = min(ticks, 0xffff << 3); -+ ticks_left = ticks - ticks_last; -+ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV16, S3C2410_TCFG1); -+ __raw_writel(ticks_last >> 3, S3C2410_TCNTB(4)); -+ } else if (ticks >> 17) { -+ ticks_last = ticks; -+ ticks_left = 0; -+ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV8, S3C2410_TCFG1); -+ __raw_writel(ticks_last >> 2, S3C2410_TCNTB(4)); -+ } else if (ticks >> 16) { -+ ticks_last = ticks; -+ ticks_left = 0; -+ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV4, S3C2410_TCFG1); -+ __raw_writel(ticks_last >> 1, S3C2410_TCNTB(4)); -+ } else { -+ ticks_last = ticks; -+ ticks_left = 0; -+ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV2, S3C2410_TCFG1); -+ __raw_writel(ticks_last >> 0, S3C2410_TCNTB(4)); -+ } -+ -+ tcnto_last = __raw_readl(S3C2410_TCNTO(4)); -+ __raw_writel(tcon | S3C2410_TCON_T4MANUALUPD, -+ S3C2410_TCON); -+ __raw_writel(tcon | S3C2410_TCON_T4START, -+ S3C2410_TCON); -+} -+ -+/* -+ * If we have already waited all the time we were supposed to wait, -+ * kick the timer, setting the longest allowed timeout value just -+ * for time-keeping. -+ */ -+static inline void s3c24xx_timer_program_idle(void) -+{ -+ s3c24xx_timer_program(0xffff << 3); -+} -+ -+static inline void s3c24xx_timer_update(int restart) -+{ -+ int ticks_cur = s3c24xx_timer_read(); -+ int jiffies_elapsed = (ticks_last - ticks_cur) >> INPUT_FREQ_SHIFT; -+ int subjiffy = ticks_last - (jiffies_elapsed << INPUT_FREQ_SHIFT); -+ -+ if (restart) { -+ if (ticks_left >= (1 << INPUT_FREQ_SHIFT)) -+ s3c24xx_timer_program(ticks_left); -+ else -+ s3c24xx_timer_program_idle(); -+ ticks_last += subjiffy; -+ } else -+ ticks_last = subjiffy; -+ -+ while (jiffies_elapsed --) -+ timer_tick(); -+} -+ -+/* Called when the timer expires. */ -+static irqreturn_t s3c24xx_timer_handler(int irq, void *dev_id) -+{ -+ tcnto_last = -1; -+ s3c24xx_timer_update(1); -+ -+ return IRQ_HANDLED; -+} -+ -+/* Called to update jiffies with time elapsed. */ -+static irqreturn_t s3c24xx_timer_handler_dyn_tick(int irq, void *dev_id) -+{ -+ s3c24xx_timer_update(0); -+ -+ return IRQ_HANDLED; -+} -+ -+/* -+ * Programs the next timer interrupt needed. Called when dynamic tick is -+ * enabled, and to reprogram the ticks to skip from pm_idle. The CPU goes -+ * to sleep directly after this. -+ */ -+static void s3c24xx_timer_reprogram_dyn_tick(unsigned long next_jiffies) -+{ -+ int subjiffy_left = ticks_last - s3c24xx_timer_read(); -+ -+ s3c24xx_timer_program(max((int) next_jiffies, 1) << INPUT_FREQ_SHIFT); -+ ticks_last += subjiffy_left; -+} -+ -+static unsigned long s3c24xx_timer_offset_dyn_tick(void) -+{ -+ /* TODO */ -+ return 0; -+} -+ -+static int s3c24xx_timer_enable_dyn_tick(void) -+{ -+ /* Set our constant prescaler. */ -+ uint32_t tcfg0 = __raw_readl(S3C2410_TCFG0); -+ int prescaler = -+ max(min(256, (int) pclk / (HZ << (INPUT_FREQ_SHIFT + 1))), 1); -+ -+ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; -+ tcfg0 |= (prescaler - 1) << S3C2410_TCFG_PRESCALER1_SHIFT; -+ __raw_writel(tcfg0, S3C2410_TCFG0); -+ -+ /* Override handlers. */ -+ s3c2410_timer_irq.handler = s3c24xx_timer_handler; -+ s3c24xx_timer.offset = s3c24xx_timer_offset_dyn_tick; -+ -+ printk(KERN_INFO "dyn_tick enabled on s3c24xx timer 4, " -+ "%li Hz pclk with prescaler %i\n", pclk, prescaler); -+ -+ s3c24xx_timer_program_idle(); -+ -+ return 0; -+} -+ -+static int s3c24xx_timer_disable_dyn_tick(void) -+{ -+ s3c2410_timer_irq.handler = s3c2410_timer_interrupt; -+ s3c24xx_timer.offset = s3c2410_gettimeoffset; -+ s3c2410_timer_setup(); -+ -+ return 0; -+} -+ -+static struct dyn_tick_timer s3c24xx_dyn_tick_timer = { -+ .enable = s3c24xx_timer_enable_dyn_tick, -+ .disable = s3c24xx_timer_disable_dyn_tick, -+ .reprogram = s3c24xx_timer_reprogram_dyn_tick, -+ .handler = s3c24xx_timer_handler_dyn_tick, -+}; -+#endif /* CONFIG_NO_IDLE_HZ */ -+ - struct sys_timer s3c24xx_timer = { - .init = s3c2410_timer_init, - .offset = s3c2410_gettimeoffset, -- .resume = s3c2410_timer_setup -+ .resume = s3c2410_timer_resume, -+#ifdef CONFIG_NO_IDLE_HZ -+ .dyn_tick = &s3c24xx_dyn_tick_timer, -+#endif - }; -Index: linux-2.6.24.7/defconfig-gta01 -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/defconfig-gta01 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,1770 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.24 -+# Mon Feb 25 07:03:56 2008 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+CONFIG_NO_IOPORT=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_FIQ=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_LOCK_KERNEL=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_FAIR_GROUP_SCHED is not set -+# CONFIG_SYSFS_DEPRECATED is not set -+# CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=m -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=m -+# CONFIG_DEFAULT_AS is not set -+CONFIG_DEFAULT_DEADLINE=y -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="deadline" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_AT91 is not set -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+CONFIG_ARCH_S3C2410=y -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+CONFIG_PLAT_S3C24XX=y -+CONFIG_CPU_S3C244X=y -+CONFIG_S3C2410_DMA=y -+# CONFIG_S3C2410_DMA_DEBUG is not set -+CONFIG_MACH_SMDK=y -+CONFIG_MACH_NEO1973=y -+CONFIG_PLAT_S3C=y -+CONFIG_CPU_LLSERIAL_S3C2410=y -+CONFIG_CPU_LLSERIAL_S3C2440=y -+ -+# -+# Boot options -+# -+# CONFIG_S3C_BOOT_WATCHDOG is not set -+# CONFIG_S3C_BOOT_ERROR_RESET is not set -+ -+# -+# Power management -+# -+# CONFIG_S3C2410_PM_DEBUG is not set -+# CONFIG_S3C2410_PM_CHECK is not set -+CONFIG_S3C_LOWLEVEL_UART_PORT=0 -+ -+# -+# S3C2400 Machines -+# -+CONFIG_CPU_S3C2410=y -+CONFIG_CPU_S3C2410_DMA=y -+CONFIG_S3C2410_PM=y -+CONFIG_S3C2410_GPIO=y -+CONFIG_S3C2410_CLOCK=y -+CONFIG_S3C2410_PWM=y -+ -+# -+# S3C2410 Machines -+# -+# CONFIG_ARCH_SMDK2410 is not set -+# CONFIG_ARCH_H1940 is not set -+# CONFIG_MACH_N30 is not set -+# CONFIG_ARCH_BAST is not set -+# CONFIG_MACH_OTOM is not set -+# CONFIG_MACH_AML_M5900 is not set -+# CONFIG_MACH_VR1000 is not set -+CONFIG_MACH_QT2410=y -+CONFIG_MACH_NEO1973_GTA01=y -+ -+# -+# S3C2412 Machines -+# -+# CONFIG_MACH_SMDK2413 is not set -+# CONFIG_MACH_SMDK2412 is not set -+# CONFIG_MACH_VSTMS is not set -+CONFIG_CPU_S3C2440=y -+CONFIG_S3C2440_DMA=y -+CONFIG_S3C2440_C_FIQ=y -+ -+# -+# S3C2440 Machines -+# -+# CONFIG_MACH_ANUBIS is not set -+# CONFIG_MACH_OSIRIS is not set -+# CONFIG_MACH_RX3715 is not set -+CONFIG_ARCH_S3C2440=y -+# CONFIG_MACH_NEXCODER_2440 is not set -+CONFIG_SMDK2440_CPU2440=y -+CONFIG_MACH_HXD8=y -+CONFIG_MACH_NEO1973_GTA02=y -+# CONFIG_NEO1973_GTA02_2440 is not set -+CONFIG_CPU_S3C2442=y -+ -+# -+# S3C2442 Machines -+# -+CONFIG_SMDK2440_CPU2442=y -+ -+# -+# S3C2443 Machines -+# -+# CONFIG_MACH_SMDK2443 is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM920T=y -+CONFIG_CPU_32v4T=y -+CONFIG_CPU_ABRT_EV4T=y -+CONFIG_CPU_CACHE_V4WT=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_TICK_ONESHOT is not set -+CONFIG_PREEMPT=y -+CONFIG_NO_IDLE_HZ=y -+CONFIG_HZ=200 -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="unused -- bootloader passes ATAG list" -+# CONFIG_XIP_KERNEL is not set -+CONFIG_KEXEC=y -+CONFIG_ATAGS_PROC=y -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+CONFIG_PM_LEGACY=y -+CONFIG_PM_DEBUG=y -+# CONFIG_PM_VERBOSE is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND_UP_POSSIBLE=y -+CONFIG_SUSPEND=y -+CONFIG_APM_EMULATION=y -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+CONFIG_XFRM_MIGRATE=y -+CONFIG_NET_KEY=m -+CONFIG_NET_KEY_MIGRATE=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_MULTIPLE_TABLES=y -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_NET_IPGRE_BROADCAST is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_TUNNEL=m -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+CONFIG_TCP_MD5SIG=y -+# CONFIG_IP_VS is not set -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_NETWORK_SECMARK is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+ -+# -+# Core Netfilter Configuration -+# -+CONFIG_NETFILTER_NETLINK=m -+CONFIG_NETFILTER_NETLINK_QUEUE=m -+CONFIG_NETFILTER_NETLINK_LOG=m -+CONFIG_NF_CONNTRACK_ENABLED=m -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CT_ACCT=y -+CONFIG_NF_CONNTRACK_MARK=y -+CONFIG_NF_CONNTRACK_EVENTS=y -+CONFIG_NF_CT_PROTO_GRE=m -+CONFIG_NF_CT_PROTO_SCTP=m -+# CONFIG_NF_CT_PROTO_UDPLITE is not set -+# CONFIG_NF_CONNTRACK_AMANDA is not set -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_H323=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_NETBIOS_NS=m -+CONFIG_NF_CONNTRACK_PPTP=m -+CONFIG_NF_CONNTRACK_SANE=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CONNTRACK_TFTP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_XTABLES=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HELPER=m -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+CONFIG_NETFILTER_XT_MATCH_SCTP=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_TIME is not set -+# CONFIG_NETFILTER_XT_MATCH_U32 is not set -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+ -+# -+# IP: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_NF_CONNTRACK_PROC_COMPAT=y -+# CONFIG_IP_NF_QUEUE is not set -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_IPRANGE=m -+CONFIG_IP_NF_MATCH_TOS=m -+# CONFIG_IP_NF_MATCH_RECENT is not set -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_MATCH_OWNER=m -+CONFIG_IP_NF_MATCH_ADDRTYPE=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_TARGET_LOG=m -+CONFIG_IP_NF_TARGET_ULOG=m -+CONFIG_NF_NAT=m -+CONFIG_NF_NAT_NEEDED=y -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_IP_NF_TARGET_REDIRECT=m -+CONFIG_IP_NF_TARGET_NETMAP=m -+CONFIG_IP_NF_TARGET_SAME=m -+CONFIG_NF_NAT_SNMP_BASIC=m -+CONFIG_NF_NAT_PROTO_GRE=m -+CONFIG_NF_NAT_FTP=m -+CONFIG_NF_NAT_IRC=m -+CONFIG_NF_NAT_TFTP=m -+# CONFIG_NF_NAT_AMANDA is not set -+CONFIG_NF_NAT_PPTP=m -+CONFIG_NF_NAT_H323=m -+CONFIG_NF_NAT_SIP=m -+CONFIG_IP_NF_MANGLE=m -+CONFIG_IP_NF_TARGET_TOS=m -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+CONFIG_IP_NF_TARGET_CLUSTERIP=m -+# CONFIG_IP_NF_RAW is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+ -+# -+# IPv6: Netfilter Configuration (EXPERIMENTAL) -+# -+CONFIG_NF_CONNTRACK_IPV6=m -+# CONFIG_IP6_NF_QUEUE is not set -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_OWNER=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_LOG=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_TARGET_HL=m -+# CONFIG_IP6_NF_RAW is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+CONFIG_NET_SCHED=y -+ -+# -+# Queueing/Scheduling -+# -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+# CONFIG_NET_SCH_RR is not set -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+CONFIG_NET_SCH_INGRESS=m -+ -+# -+# Classification -+# -+CONFIG_NET_CLS=y -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_ROUTE=y -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_PERF=y -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+# CONFIG_NET_EMATCH is not set -+# CONFIG_NET_CLS_ACT is not set -+# CONFIG_NET_CLS_POLICE is not set -+# CONFIG_NET_CLS_IND is not set -+CONFIG_NET_SCH_FIFO=y -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+CONFIG_BT=m -+CONFIG_BT_L2CAP=m -+CONFIG_BT_SCO=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+ -+# -+# Bluetooth device drivers -+# -+CONFIG_BT_HCIUSB=m -+CONFIG_BT_HCIUSB_SCO=y -+# CONFIG_BT_HCIBTSDIO is not set -+# CONFIG_BT_HCIUART is not set -+# CONFIG_BT_HCIBCM203X is not set -+# CONFIG_BT_HCIBPA10X is not set -+# CONFIG_BT_HCIBFUSB is not set -+# CONFIG_BT_HCIVHCI is not set -+# CONFIG_AF_RXRPC is not set -+CONFIG_FIB_RULES=y -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+CONFIG_WIRELESS_EXT=y -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=m -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+CONFIG_CONNECTOR=m -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_CFI_INTELEXT=y -+# CONFIG_MTD_CFI_AMDSTD is not set -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+CONFIG_MTD_ABSENT=y -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x8000000 -+CONFIG_MTD_PHYSMAP_LEN=0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_ARM_INTEGRATOR is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+CONFIG_MTD_NAND_VERIFY_WRITE=y -+# CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+CONFIG_MTD_NAND_IDS=y -+CONFIG_MTD_NAND_S3C2410=y -+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set -+CONFIG_MTD_NAND_S3C2410_HWECC=y -+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+# CONFIG_MTD_NAND_NANDSIM is not set -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_PNP=y -+CONFIG_PNP_DEBUG=y -+ -+# -+# Protocols -+# -+# CONFIG_PNPACPI is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+CONFIG_BLK_DEV_UB=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=m -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=m -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=m -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+CONFIG_CHR_DEV_SG=m -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+CONFIG_SCSI_SCAN_ASYNC=y -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+CONFIG_TUN=m -+# CONFIG_VETH is not set -+# CONFIG_NET_SB1000 is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+CONFIG_NET_PCI=y -+# CONFIG_B44 is not set -+CONFIG_CS89x0=m -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_RNDIS_HOST=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_BELKIN=y -+CONFIG_USB_ARMLINUX=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_KC2190=y -+CONFIG_USB_NET_ZAURUS=m -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_MPPE=m -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+CONFIG_KEYBOARD_STOWAWAY=m -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_KEYBOARD_NEO1973=y -+CONFIG_KEYBOARD_QT2410=y -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+# CONFIG_MOUSE_GPIO is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+# CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+CONFIG_TOUCHSCREEN_S3C2410=y -+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+CONFIG_INPUT_MISC=y -+# CONFIG_INPUT_ATI_REMOTE is not set -+# CONFIG_INPUT_ATI_REMOTE2 is not set -+# CONFIG_INPUT_KEYSPAN_REMOTE is not set -+# CONFIG_INPUT_POWERMATE is not set -+# CONFIG_INPUT_YEALINK is not set -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_LIS302DL=y -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+# CONFIG_SERIO_SERPORT is not set -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_NR_TTY_DEVICES=4 -+CONFIG_HW_CONSOLE=y -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_S3C2410=y -+CONFIG_SERIAL_S3C2410_CONSOLE=y -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+CONFIG_I2C_S3C2410=y -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+CONFIG_SENSORS_PCF50606=y -+CONFIG_SENSORS_PCF50633=y -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+CONFIG_SENSORS_TSL256X=m -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_BITBANG=y -+CONFIG_SPI_S3C24XX=y -+CONFIG_SPI_S3C24XX_GPIO=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+CONFIG_POWER_SUPPLY=y -+# CONFIG_POWER_SUPPLY_DEBUG is not set -+# CONFIG_PDA_POWER is not set -+# CONFIG_APM_POWER is not set -+# CONFIG_BATTERY_DS2760 is not set -+CONFIG_BATTERY_GTA01=y -+CONFIG_BATTERY_BQ27000_HDQ=y -+CONFIG_GTA02_HDQ=y -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_S3C2410_WATCHDOG=m -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+CONFIG_MFD_GLAMO=y -+CONFIG_MFD_GLAMO_FB=y -+CONFIG_MFD_GLAMO_SPI_GPIO=y -+CONFIG_MFD_GLAMO_SPI_FB=y -+CONFIG_MFD_GLAMO_MCI=y -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_UVESA is not set -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_S3C2410=y -+# CONFIG_FB_S3C2410_DEBUG is not set -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+# CONFIG_LCD_LTV350QV is not set -+CONFIG_BACKLIGHT_CLASS_DEVICE=y -+# CONFIG_BACKLIGHT_CORGI is not set -+CONFIG_BACKLIGHT_GTA01=y -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+CONFIG_DISPLAY_JBT6K74=y -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -+CONFIG_FONTS=y -+# CONFIG_FONT_8x8 is not set -+# CONFIG_FONT_8x16 is not set -+CONFIG_FONT_6x11=y -+# CONFIG_FONT_7x14 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+# CONFIG_FONT_MINI_4x6 is not set -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_10x18 is not set -+# CONFIG_LOGO is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=y -+ -+# -+# Advanced Linux Sound Architecture -+# -+CONFIG_SND=m -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+CONFIG_SND_SUPPORT_OLD_API=y -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+ -+# -+# Generic devices -+# -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+ -+# -+# ALSA ARM devices -+# -+ -+# -+# SPI devices -+# -+ -+# -+# USB devices -+# -+# CONFIG_SND_USB_AUDIO is not set -+# CONFIG_SND_USB_CAIAQ is not set -+ -+# -+# System on Chip audio support -+# -+CONFIG_SND_SOC=m -+CONFIG_SND_S3C24XX_SOC=m -+CONFIG_SND_S3C24XX_SOC_I2S=m -+CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=m -+CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=m -+ -+# -+# SoC Audio support for SuperH -+# -+CONFIG_SND_SOC_WM8753=m -+ -+# -+# Open Sound System -+# -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=m -+# CONFIG_USB_HIDINPUT_POWERBOOK is not set -+# CONFIG_HID_FF is not set -+# CONFIG_USB_HIDDEV is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+# CONFIG_USB_KBD is not set -+# CONFIG_USB_MOUSE is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+CONFIG_USB_SUSPEND=y -+# CONFIG_USB_PERSIST is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=m -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+CONFIG_USB_ACM=m -+CONFIG_USB_PRINTER=m -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=m -+# CONFIG_USB_STORAGE_DEBUG is not set -+CONFIG_USB_STORAGE_DATAFAB=y -+CONFIG_USB_STORAGE_FREECOM=y -+# CONFIG_USB_STORAGE_ISD200 is not set -+CONFIG_USB_STORAGE_DPCM=y -+CONFIG_USB_STORAGE_USBAT=y -+CONFIG_USB_STORAGE_SDDR09=y -+CONFIG_USB_STORAGE_SDDR55=y -+CONFIG_USB_STORAGE_JUMPSHOT=y -+CONFIG_USB_STORAGE_ALAUDA=y -+CONFIG_USB_STORAGE_KARMA=y -+CONFIG_USB_LIBUSUAL=y -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+CONFIG_USB_MON=y -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_AIRPRIME=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+# CONFIG_USB_SERIAL_CH341 is not set -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP2101=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_FUNSOFT=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KEYSPAN_MPR=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19=y -+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+# CONFIG_USB_SERIAL_OTI6858 is not set -+CONFIG_USB_SERIAL_HP4X=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SAFE_PADDED=y -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+# CONFIG_USB_SERIAL_DEBUG is not set -+CONFIG_USB_EZUSB=y -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+CONFIG_USB_BERRY_CHARGE=m -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+CONFIG_USB_GADGET_S3C2410=y -+CONFIG_USB_S3C2410=y -+# CONFIG_USB_S3C2410_DEBUG is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=m -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+CONFIG_USB_G_SERIAL=m -+CONFIG_USB_MIDI_GADGET=m -+ -+# -+# SDIO support -+# -+CONFIG_SDIO=y -+CONFIG_SDIO_S3C24XX=y -+CONFIG_SDIO_S3C24XX_DMA=y -+CONFIG_SDIO_AR6000_WLAN=y -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+CONFIG_MMC_UNSAFE_RESUME=y -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SPI is not set -+CONFIG_MMC_S3C=y -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_S3C24XX=m -+# CONFIG_LEDS_GPIO is not set -+CONFIG_LEDS_NEO1973_VIBRATOR=y -+CONFIG_LEDS_NEO1973_GTA02=y -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+CONFIG_RTC_DEBUG=y -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_S3C=m -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+CONFIG_ROMFS_FS=y -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+CONFIG_AUTOFS4_FS=m -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+# CONFIG_ZISOFS is not set -+CONFIG_UDF_FS=m -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=m -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_YAFFS_FS=y -+CONFIG_YAFFS_YAFFS1=y -+CONFIG_YAFFS_9BYTE_TAGS=y -+CONFIG_YAFFS_YAFFS2=y -+CONFIG_YAFFS_AUTO_YAFFS2=y -+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 -+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+CONFIG_JFFS2_SUMMARY=y -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+CONFIG_NFS_V4=y -+# CONFIG_NFS_DIRECTIO is not set -+CONFIG_NFSD=m -+CONFIG_NFSD_V3=y -+# CONFIG_NFSD_V3_ACL is not set -+CONFIG_NFSD_V4=y -+CONFIG_NFSD_TCP=y -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=m -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+CONFIG_SUNRPC_GSS=y -+# CONFIG_SUNRPC_BIND34 is not set -+CONFIG_RPCSEC_GSS_KRB5=y -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+CONFIG_CIFS=m -+# CONFIG_CIFS_STATS is not set -+CONFIG_CIFS_WEAK_PW_HASH=y -+# CONFIG_CIFS_XATTR is not set -+# CONFIG_CIFS_DEBUG2 is not set -+# CONFIG_CIFS_EXPERIMENTAL is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=m -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+# CONFIG_MARKERS is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_SCHED_DEBUG is not set -+# CONFIG_SCHEDSTATS is not set -+CONFIG_TIMER_STATS=y -+# CONFIG_DEBUG_SLAB is not set -+CONFIG_DEBUG_PREEMPT=y -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+# CONFIG_DEBUG_USER is not set -+CONFIG_DEBUG_ERRORS=y -+# CONFIG_DEBUG_LL is not set -+CONFIG_DEBUG_S3C_UART=0 -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_NULL=m -+CONFIG_CRYPTO_MD4=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=m -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_GF128MUL=m -+CONFIG_CRYPTO_ECB=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_PCBC=m -+CONFIG_CRYPTO_LRW=m -+# CONFIG_CRYPTO_XTS is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_FCRYPT=m -+CONFIG_CRYPTO_BLOWFISH=m -+CONFIG_CRYPTO_TWOFISH=m -+CONFIG_CRYPTO_TWOFISH_COMMON=m -+CONFIG_CRYPTO_SERPENT=m -+CONFIG_CRYPTO_AES=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_CAST6=m -+CONFIG_CRYPTO_TEA=m -+CONFIG_CRYPTO_ARC4=m -+CONFIG_CRYPTO_KHAZAD=m -+CONFIG_CRYPTO_ANUBIS=m -+# CONFIG_CRYPTO_SEED is not set -+CONFIG_CRYPTO_DEFLATE=m -+CONFIG_CRYPTO_MICHAEL_MIC=m -+CONFIG_CRYPTO_CRC32C=m -+CONFIG_CRYPTO_CAMELLIA=m -+CONFIG_CRYPTO_TEST=m -+# CONFIG_CRYPTO_AUTHENC is not set -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=m -+CONFIG_CRC16=m -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=m -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_TEXTSEARCH=y -+CONFIG_TEXTSEARCH_KMP=m -+CONFIG_TEXTSEARCH_BM=m -+CONFIG_TEXTSEARCH_FSM=m -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_DMA=y -Index: linux-2.6.24.7/defconfig-gta02 -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/defconfig-gta02 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,1758 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.24 -+# Wed Nov 12 09:11:19 2008 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+CONFIG_NO_IOPORT=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_ZONE_DMA=y -+CONFIG_FIQ=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_LOCK_KERNEL=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_FAIR_GROUP_SCHED is not set -+# CONFIG_SYSFS_DEPRECATED is not set -+# CONFIG_RELAY is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=m -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=m -+# CONFIG_DEFAULT_AS is not set -+CONFIG_DEFAULT_DEADLINE=y -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="deadline" -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_AT91 is not set -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_CO285 is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+CONFIG_ARCH_S3C2410=y -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+CONFIG_PLAT_S3C24XX=y -+CONFIG_CPU_S3C244X=y -+CONFIG_S3C2410_DMA=y -+# CONFIG_S3C2410_DMA_DEBUG is not set -+CONFIG_MACH_SMDK=y -+CONFIG_MACH_NEO1973=y -+CONFIG_PLAT_S3C=y -+CONFIG_CPU_LLSERIAL_S3C2410=y -+CONFIG_CPU_LLSERIAL_S3C2440=y -+ -+# -+# Boot options -+# -+# CONFIG_S3C_BOOT_WATCHDOG is not set -+# CONFIG_S3C_BOOT_ERROR_RESET is not set -+ -+# -+# Power management -+# -+# CONFIG_S3C2410_PM_CHECK is not set -+CONFIG_S3C_LOWLEVEL_UART_PORT=2 -+ -+# -+# S3C2400 Machines -+# -+CONFIG_CPU_S3C2410=y -+CONFIG_CPU_S3C2410_DMA=y -+CONFIG_S3C2410_PM=y -+CONFIG_S3C2410_GPIO=y -+CONFIG_S3C2410_CLOCK=y -+CONFIG_S3C2410_PWM=y -+ -+# -+# S3C2410 Machines -+# -+# CONFIG_ARCH_SMDK2410 is not set -+# CONFIG_ARCH_H1940 is not set -+# CONFIG_MACH_N30 is not set -+# CONFIG_ARCH_BAST is not set -+# CONFIG_MACH_OTOM is not set -+# CONFIG_MACH_AML_M5900 is not set -+# CONFIG_MACH_VR1000 is not set -+CONFIG_MACH_QT2410=y -+CONFIG_MACH_NEO1973_GTA01=y -+ -+# -+# S3C2412 Machines -+# -+# CONFIG_MACH_SMDK2413 is not set -+# CONFIG_MACH_SMDK2412 is not set -+# CONFIG_MACH_VSTMS is not set -+CONFIG_CPU_S3C2440=y -+CONFIG_S3C2440_DMA=y -+CONFIG_S3C2440_C_FIQ=y -+ -+# -+# S3C2440 Machines -+# -+# CONFIG_MACH_ANUBIS is not set -+# CONFIG_MACH_OSIRIS is not set -+# CONFIG_MACH_RX3715 is not set -+CONFIG_ARCH_S3C2440=y -+# CONFIG_MACH_NEXCODER_2440 is not set -+CONFIG_SMDK2440_CPU2440=y -+CONFIG_MACH_HXD8=y -+CONFIG_MACH_NEO1973_GTA02=y -+# CONFIG_NEO1973_GTA02_2440 is not set -+CONFIG_CPU_S3C2442=y -+ -+# -+# S3C2442 Machines -+# -+CONFIG_SMDK2440_CPU2442=y -+ -+# -+# S3C2443 Machines -+# -+# CONFIG_MACH_SMDK2443 is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM920T=y -+CONFIG_CPU_32v4T=y -+CONFIG_CPU_ABRT_EV4T=y -+CONFIG_CPU_CACHE_V4WT=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+# CONFIG_TICK_ONESHOT is not set -+CONFIG_PREEMPT=y -+CONFIG_NO_IDLE_HZ=y -+CONFIG_HZ=200 -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=1 -+CONFIG_BOUNCE=y -+CONFIG_VIRT_TO_BUS=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="unused -- bootloader passes ATAG list" -+# CONFIG_XIP_KERNEL is not set -+CONFIG_KEXEC=y -+CONFIG_ATAGS_PROC=y -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+CONFIG_PM_LEGACY=y -+CONFIG_PM_DEBUG=y -+# CONFIG_PM_VERBOSE is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND_UP_POSSIBLE=y -+CONFIG_SUSPEND=y -+CONFIG_APM_EMULATION=y -+ -+# -+# Networking -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+CONFIG_XFRM_MIGRATE=y -+CONFIG_NET_KEY=m -+CONFIG_NET_KEY_MIGRATE=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_MULTIPLE_TABLES=y -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_NET_IPGRE_BROADCAST is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_TUNNEL=m -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+CONFIG_TCP_MD5SIG=y -+# CONFIG_IP_VS is not set -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_NETWORK_SECMARK is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+ -+# -+# Core Netfilter Configuration -+# -+CONFIG_NETFILTER_NETLINK=m -+CONFIG_NETFILTER_NETLINK_QUEUE=m -+CONFIG_NETFILTER_NETLINK_LOG=m -+CONFIG_NF_CONNTRACK_ENABLED=m -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CT_ACCT=y -+CONFIG_NF_CONNTRACK_MARK=y -+CONFIG_NF_CONNTRACK_EVENTS=y -+CONFIG_NF_CT_PROTO_GRE=m -+CONFIG_NF_CT_PROTO_SCTP=m -+# CONFIG_NF_CT_PROTO_UDPLITE is not set -+# CONFIG_NF_CONNTRACK_AMANDA is not set -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_H323=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_NETBIOS_NS=m -+CONFIG_NF_CONNTRACK_PPTP=m -+CONFIG_NF_CONNTRACK_SANE=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CONNTRACK_TFTP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_XTABLES=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HELPER=m -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+CONFIG_NETFILTER_XT_MATCH_SCTP=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_TIME is not set -+# CONFIG_NETFILTER_XT_MATCH_U32 is not set -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+ -+# -+# IP: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_NF_CONNTRACK_PROC_COMPAT=y -+# CONFIG_IP_NF_QUEUE is not set -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_IPRANGE=m -+CONFIG_IP_NF_MATCH_TOS=m -+# CONFIG_IP_NF_MATCH_RECENT is not set -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_MATCH_OWNER=m -+CONFIG_IP_NF_MATCH_ADDRTYPE=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_TARGET_LOG=m -+CONFIG_IP_NF_TARGET_ULOG=m -+CONFIG_NF_NAT=m -+CONFIG_NF_NAT_NEEDED=y -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_IP_NF_TARGET_REDIRECT=m -+CONFIG_IP_NF_TARGET_NETMAP=m -+CONFIG_IP_NF_TARGET_SAME=m -+CONFIG_NF_NAT_SNMP_BASIC=m -+CONFIG_NF_NAT_PROTO_GRE=m -+CONFIG_NF_NAT_FTP=m -+CONFIG_NF_NAT_IRC=m -+CONFIG_NF_NAT_TFTP=m -+# CONFIG_NF_NAT_AMANDA is not set -+CONFIG_NF_NAT_PPTP=m -+CONFIG_NF_NAT_H323=m -+CONFIG_NF_NAT_SIP=m -+CONFIG_IP_NF_MANGLE=m -+CONFIG_IP_NF_TARGET_TOS=m -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+CONFIG_IP_NF_TARGET_CLUSTERIP=m -+# CONFIG_IP_NF_RAW is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+ -+# -+# IPv6: Netfilter Configuration (EXPERIMENTAL) -+# -+CONFIG_NF_CONNTRACK_IPV6=m -+# CONFIG_IP6_NF_QUEUE is not set -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_OWNER=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_LOG=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_TARGET_HL=m -+# CONFIG_IP6_NF_RAW is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+CONFIG_NET_SCHED=y -+ -+# -+# Queueing/Scheduling -+# -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+# CONFIG_NET_SCH_RR is not set -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+CONFIG_NET_SCH_INGRESS=m -+ -+# -+# Classification -+# -+CONFIG_NET_CLS=y -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_ROUTE=y -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_PERF=y -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+# CONFIG_NET_EMATCH is not set -+# CONFIG_NET_CLS_ACT is not set -+# CONFIG_NET_CLS_POLICE is not set -+# CONFIG_NET_CLS_IND is not set -+CONFIG_NET_SCH_FIFO=y -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+CONFIG_BT=m -+CONFIG_BT_L2CAP=m -+CONFIG_BT_SCO=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+ -+# -+# Bluetooth device drivers -+# -+CONFIG_BT_HCIUSB=m -+CONFIG_BT_HCIUSB_SCO=y -+# CONFIG_BT_HCIBTSDIO is not set -+# CONFIG_BT_HCIUART is not set -+# CONFIG_BT_HCIBCM203X is not set -+# CONFIG_BT_HCIBPA10X is not set -+# CONFIG_BT_HCIBFUSB is not set -+# CONFIG_BT_HCIVHCI is not set -+# CONFIG_AF_RXRPC is not set -+CONFIG_FIB_RULES=y -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+CONFIG_WIRELESS_EXT=y -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=m -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+CONFIG_CONNECTOR=m -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_CFI_INTELEXT=y -+# CONFIG_MTD_CFI_AMDSTD is not set -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+CONFIG_MTD_ABSENT=y -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x8000000 -+CONFIG_MTD_PHYSMAP_LEN=0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_ARM_INTEGRATOR is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+CONFIG_MTD_NAND_VERIFY_WRITE=y -+# CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+CONFIG_MTD_NAND_IDS=y -+CONFIG_MTD_NAND_S3C2410=y -+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set -+CONFIG_MTD_NAND_S3C2410_HWECC=y -+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+# CONFIG_MTD_NAND_NANDSIM is not set -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_PNP=y -+CONFIG_PNP_DEBUG=y -+ -+# -+# Protocols -+# -+# CONFIG_PNPACPI is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+CONFIG_BLK_DEV_UB=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=m -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=m -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=m -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+CONFIG_CHR_DEV_SG=m -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+CONFIG_SCSI_SCAN_ASYNC=y -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_NETDEVICES_MULTIQUEUE is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+CONFIG_TUN=m -+# CONFIG_VETH is not set -+# CONFIG_NET_SB1000 is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+CONFIG_NET_PCI=y -+# CONFIG_B44 is not set -+CONFIG_CS89x0=m -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_RNDIS_HOST=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_BELKIN=y -+CONFIG_USB_ARMLINUX=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_KC2190=y -+CONFIG_USB_NET_ZAURUS=m -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_MPPE=m -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+CONFIG_KEYBOARD_STOWAWAY=m -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_KEYBOARD_NEO1973=y -+CONFIG_KEYBOARD_QT2410=y -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+# CONFIG_MOUSE_GPIO is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+# CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+CONFIG_TOUCHSCREEN_S3C2410=y -+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+CONFIG_INPUT_MISC=y -+# CONFIG_INPUT_ATI_REMOTE is not set -+# CONFIG_INPUT_ATI_REMOTE2 is not set -+# CONFIG_INPUT_KEYSPAN_REMOTE is not set -+# CONFIG_INPUT_POWERMATE is not set -+# CONFIG_INPUT_YEALINK is not set -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_LIS302DL=y -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+# CONFIG_SERIO_SERPORT is not set -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+CONFIG_NR_TTY_DEVICES=4 -+CONFIG_HW_CONSOLE=y -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_S3C2410=y -+CONFIG_SERIAL_S3C2410_CONSOLE=y -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+CONFIG_I2C_S3C2410=y -+# CONFIG_I2C_SIMTEC is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_TINY_USB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_SENSORS_DS1337 is not set -+# CONFIG_SENSORS_DS1374 is not set -+# CONFIG_DS1682 is not set -+# CONFIG_SENSORS_EEPROM is not set -+CONFIG_SENSORS_PCF50606=y -+CONFIG_SENSORS_PCF50633=y -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+CONFIG_SENSORS_TSL256X=m -+# CONFIG_PCA9632 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# SPI support -+# -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_BITBANG=y -+CONFIG_SPI_S3C24XX=y -+CONFIG_SPI_S3C24XX_GPIO=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+# CONFIG_W1 is not set -+CONFIG_POWER_SUPPLY=y -+# CONFIG_POWER_SUPPLY_DEBUG is not set -+# CONFIG_PDA_POWER is not set -+CONFIG_APM_POWER=y -+# CONFIG_BATTERY_DS2760 is not set -+# CONFIG_BATTERY_GTA01 is not set -+CONFIG_BATTERY_BQ27000_HDQ=y -+CONFIG_GTA02_HDQ=y -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_S3C2410_WATCHDOG=m -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_SM501 is not set -+CONFIG_MFD_GLAMO=y -+CONFIG_MFD_GLAMO_FB=y -+CONFIG_MFD_GLAMO_SPI_GPIO=y -+CONFIG_MFD_GLAMO_SPI_FB=y -+CONFIG_MFD_GLAMO_MCI=y -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+CONFIG_DAB=y -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_SYS_FOPS is not set -+CONFIG_FB_DEFERRED_IO=y -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_UVESA is not set -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_S3C2410=y -+# CONFIG_FB_S3C2410_DEBUG is not set -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+# CONFIG_LCD_LTV350QV is not set -+CONFIG_BACKLIGHT_CLASS_DEVICE=y -+# CONFIG_BACKLIGHT_CORGI is not set -+CONFIG_BACKLIGHT_GTA01=y -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+CONFIG_DISPLAY_JBT6K74=y -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -+CONFIG_FONTS=y -+# CONFIG_FONT_8x8 is not set -+# CONFIG_FONT_8x16 is not set -+CONFIG_FONT_6x11=y -+# CONFIG_FONT_7x14 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+# CONFIG_FONT_MINI_4x6 is not set -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_10x18 is not set -+# CONFIG_LOGO is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=y -+ -+# -+# Advanced Linux Sound Architecture -+# -+CONFIG_SND=m -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+CONFIG_SND_RAWMIDI=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+CONFIG_SND_SUPPORT_OLD_API=y -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+ -+# -+# Generic devices -+# -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+ -+# -+# ALSA ARM devices -+# -+ -+# -+# SPI devices -+# -+ -+# -+# USB devices -+# -+# CONFIG_SND_USB_AUDIO is not set -+# CONFIG_SND_USB_CAIAQ is not set -+ -+# -+# System on Chip audio support -+# -+CONFIG_SND_SOC=m -+CONFIG_SND_S3C24XX_SOC=m -+CONFIG_SND_S3C24XX_SOC_I2S=m -+CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=m -+# CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753_DEBUG is not set -+CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=m -+ -+# -+# SoC Audio support for SuperH -+# -+CONFIG_SND_SOC_WM8753=m -+ -+# -+# Open Sound System -+# -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=y -+# CONFIG_USB_HIDINPUT_POWERBOOK is not set -+# CONFIG_HID_FF is not set -+CONFIG_USB_HIDDEV=y -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+CONFIG_USB_SUSPEND=y -+# CONFIG_USB_PERSIST is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_ISP116X_HCD is not set -+CONFIG_USB_OHCI_HCD=m -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+CONFIG_USB_ACM=m -+CONFIG_USB_PRINTER=m -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=m -+# CONFIG_USB_STORAGE_DEBUG is not set -+CONFIG_USB_STORAGE_DATAFAB=y -+CONFIG_USB_STORAGE_FREECOM=y -+# CONFIG_USB_STORAGE_ISD200 is not set -+CONFIG_USB_STORAGE_DPCM=y -+CONFIG_USB_STORAGE_USBAT=y -+CONFIG_USB_STORAGE_SDDR09=y -+CONFIG_USB_STORAGE_SDDR55=y -+CONFIG_USB_STORAGE_JUMPSHOT=y -+CONFIG_USB_STORAGE_ALAUDA=y -+CONFIG_USB_STORAGE_KARMA=y -+CONFIG_USB_LIBUSUAL=y -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+CONFIG_USB_MON=y -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_AIRPRIME=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+# CONFIG_USB_SERIAL_CH341 is not set -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP2101=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_FUNSOFT=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KEYSPAN_MPR=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19=y -+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+# CONFIG_USB_SERIAL_OTI6858 is not set -+CONFIG_USB_SERIAL_HP4X=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SAFE_PADDED=y -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+# CONFIG_USB_SERIAL_DEBUG is not set -+CONFIG_USB_EZUSB=y -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+CONFIG_USB_BERRY_CHARGE=m -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+# CONFIG_USB_TEST is not set -+ -+# -+# USB DSL modem support -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+CONFIG_USB_GADGET_S3C2410=y -+CONFIG_USB_S3C2410=y -+# CONFIG_USB_S3C2410_DEBUG is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+CONFIG_USB_MIDI_GADGET=m -+ -+# -+# SDIO support -+# -+CONFIG_SDIO=y -+CONFIG_SDIO_S3C24XX=y -+CONFIG_SDIO_S3C24XX_DMA=y -+CONFIG_SDIO_AR6000_WLAN=y -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+CONFIG_MMC_UNSAFE_RESUME=y -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SPI is not set -+CONFIG_MMC_S3C=y -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_S3C24XX=m -+# CONFIG_LEDS_GPIO is not set -+CONFIG_LEDS_NEO1973_VIBRATOR=y -+CONFIG_LEDS_NEO1973_GTA02=y -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+CONFIG_RTC_DEBUG=y -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_S3C=m -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_MINIX_FS is not set -+CONFIG_ROMFS_FS=y -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+CONFIG_AUTOFS4_FS=m -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+# CONFIG_ZISOFS is not set -+CONFIG_UDF_FS=m -+CONFIG_UDF_NLS=y -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=m -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+CONFIG_JFFS2_SUMMARY=y -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+CONFIG_NFS_V4=y -+# CONFIG_NFS_DIRECTIO is not set -+CONFIG_NFSD=m -+CONFIG_NFSD_V3=y -+# CONFIG_NFSD_V3_ACL is not set -+CONFIG_NFSD_V4=y -+CONFIG_NFSD_TCP=y -+CONFIG_ROOT_NFS=y -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=m -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+CONFIG_SUNRPC_GSS=y -+# CONFIG_SUNRPC_BIND34 is not set -+CONFIG_RPCSEC_GSS_KRB5=y -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+CONFIG_CIFS=m -+# CONFIG_CIFS_STATS is not set -+CONFIG_CIFS_WEAK_PW_HASH=y -+# CONFIG_CIFS_XATTR is not set -+# CONFIG_CIFS_DEBUG2 is not set -+# CONFIG_CIFS_EXPERIMENTAL is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=m -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+CONFIG_INSTRUMENTATION=y -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+# CONFIG_MARKERS is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_SCHED_DEBUG is not set -+# CONFIG_SCHEDSTATS is not set -+CONFIG_TIMER_STATS=y -+# CONFIG_DEBUG_SLAB is not set -+CONFIG_DEBUG_PREEMPT=y -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+CONFIG_FORCED_INLINING=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+# CONFIG_DEBUG_USER is not set -+CONFIG_DEBUG_ERRORS=y -+# CONFIG_DEBUG_LL is not set -+CONFIG_DEBUG_S3C_UART=2 -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_NULL=m -+CONFIG_CRYPTO_MD4=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_SHA1=m -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_GF128MUL=m -+CONFIG_CRYPTO_ECB=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_PCBC=m -+CONFIG_CRYPTO_LRW=m -+# CONFIG_CRYPTO_XTS is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_FCRYPT=m -+CONFIG_CRYPTO_BLOWFISH=m -+CONFIG_CRYPTO_TWOFISH=m -+CONFIG_CRYPTO_TWOFISH_COMMON=m -+CONFIG_CRYPTO_SERPENT=m -+CONFIG_CRYPTO_AES=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_CAST6=m -+CONFIG_CRYPTO_TEA=m -+CONFIG_CRYPTO_ARC4=m -+CONFIG_CRYPTO_KHAZAD=m -+CONFIG_CRYPTO_ANUBIS=m -+# CONFIG_CRYPTO_SEED is not set -+CONFIG_CRYPTO_DEFLATE=m -+CONFIG_CRYPTO_MICHAEL_MIC=m -+CONFIG_CRYPTO_CRC32C=m -+CONFIG_CRYPTO_CAMELLIA=m -+CONFIG_CRYPTO_TEST=m -+# CONFIG_CRYPTO_AUTHENC is not set -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=m -+CONFIG_CRC16=m -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=m -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_TEXTSEARCH=y -+CONFIG_TEXTSEARCH_KMP=m -+CONFIG_TEXTSEARCH_BM=m -+CONFIG_TEXTSEARCH_FSM=m -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_DMA=y -Index: linux-2.6.24.7/dfu-kern -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/dfu-kern 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,9 @@ -+#!/bin/bash -+../../dfu-util/src/dfu-util -a 3 -d 0x1d50:0x5119 -D uImage.bin -+if [ $? -eq 1 ] ; then -+../../dfu-util/src/dfu-util -a 3 -d 0x1d50:0x5120 -D uImage.bin -+../../dfu-util/src/dfu-util -a 3 -d 0x1d50:0x5119 -D uImage.bin -+ -+fi -+ -+ -Index: linux-2.6.24.7/Documentation/arm/Samsung-S3C24XX/NAND.txt -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/Documentation/arm/Samsung-S3C24XX/NAND.txt 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,30 @@ -+ S3C24XX NAND Support -+ ==================== -+ -+Introduction -+------------ -+ -+Small Page NAND -+--------------- -+ -+The driver uses a 512 byte (1 page) ECC code for this setup. The -+ECC code is not directly compatible with the default kernel ECC -+code, so the driver enforces its own OOB layout and ECC parameters -+ -+Large Page NAND -+--------------- -+ -+The driver is capable of handling NAND flash with a 2KiB page -+size, with support for hardware ECC generation and correction. -+ -+Unlike the 512byte page mode, the driver generates ECC data for -+each 256 byte block in an 2KiB page. This means that more than -+one error in a page can be rectified. It also means that the -+OOB layout remains the default kernel layout for these flashes. -+ -+ -+Document Author -+--------------- -+ -+Ben Dooks, Copyright 2007 Simtec Electronics -+ -Index: linux-2.6.24.7/Documentation/arm/Samsung-S3C24XX/Overview.txt -=================================================================== ---- linux-2.6.24.7.orig/Documentation/arm/Samsung-S3C24XX/Overview.txt 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/Documentation/arm/Samsung-S3C24XX/Overview.txt 2008-12-11 22:46:49.000000000 +0100 -@@ -156,6 +156,8 @@ NAND - controller. If there are any problems the latest linux-mtd - code can be found from http://www.linux-mtd.infradead.org/ - -+ For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt -+ - - Serial - ------ -Index: linux-2.6.24.7/drivers/base/core.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/base/core.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/base/core.c 2008-12-11 22:46:49.000000000 +0100 -@@ -42,6 +42,11 @@ int (*platform_notify_remove)(struct dev - */ - const char *dev_driver_string(struct device *dev) - { -+ if (!dev) { -+ printk(KERN_ERR"Null dev to dev_driver_string\n"); -+ dump_stack(); -+ return "*NULL*"; -+ } - return dev->driver ? dev->driver->name : - (dev->bus ? dev->bus->name : - (dev->class ? dev->class->name : "")); -Index: linux-2.6.24.7/drivers/base/power/main.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/base/power/main.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/base/power/main.c 2008-12-11 22:46:49.000000000 +0100 -@@ -40,9 +40,9 @@ int (*platform_enable_wakeup)(struct dev - - void device_pm_add(struct device *dev) - { -- pr_debug("PM: Adding info for %s:%s\n", -+ /* pr_debug("PM: Adding info for %s:%s\n", - dev->bus ? dev->bus->name : "No Bus", -- kobject_name(&dev->kobj)); -+ kobject_name(&dev->kobj)); */ - mutex_lock(&dpm_list_mtx); - list_add_tail(&dev->power.entry, &dpm_active); - mutex_unlock(&dpm_list_mtx); -Index: linux-2.6.24.7/drivers/char/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/char/Kconfig 2008-12-11 22:46:09.000000000 +0100 -+++ linux-2.6.24.7/drivers/char/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -58,6 +58,18 @@ config VT_CONSOLE - - If unsure, say Y. - -+config NR_TTY_DEVICES -+ int "Maximum tty device number" -+ depends on VT -+ default 63 -+ ---help--- -+ This is the highest numbered device created in /dev. You will actually have -+ NR_TTY_DEVICES+1 devices in /dev. The default is 63, which will result in -+ 64 /dev entries. The lowest number you can set is 11, anything below that, -+ and it will default to 11. 63 is also the upper limit so we don't overrun -+ the serial consoles. -+ -+ - config HW_CONSOLE - bool - depends on VT && !S390 && !UML -Index: linux-2.6.24.7/drivers/i2c/busses/i2c-s3c2410.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/i2c/busses/i2c-s3c2410.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/i2c/busses/i2c-s3c2410.c 2008-12-11 22:46:49.000000000 +0100 -@@ -71,6 +71,8 @@ struct s3c24xx_i2c { - struct resource *irq; - struct resource *ioarea; - struct i2c_adapter adap; -+ -+ int suspended; - }; - - /* default platform data to use if not supplied in the platform_device -@@ -156,6 +158,14 @@ static inline void s3c24xx_i2c_disable_i - unsigned long tmp; - - tmp = readl(i2c->regs + S3C2410_IICCON); -+ -+/* S3c2442 datasheet -+ * -+ * If the IICCON[5]=0, IICCON[4] does not operate correctly. -+ * So, It is recommended that you should set IICCON[5]=1, -+ * although you does not use the IIC interrupt. -+ */ -+ - writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); - } - -@@ -282,7 +292,7 @@ static int i2s_s3c_irq_nextbyte(struct s - - case STATE_STOP: - dev_err(i2c->dev, "%s: called in STATE_STOP\n", __FUNCTION__); -- s3c24xx_i2c_disable_irq(i2c); -+ s3c24xx_i2c_disable_irq(i2c); - goto out_ack; - - case STATE_START: -@@ -502,6 +512,15 @@ static int s3c24xx_i2c_doxfer(struct s3c - unsigned long timeout; - int ret; - -+ if (i2c->suspended) { -+ dev_err(i2c->dev, -+ "Hey I am still asleep (suspended: %d), retry later\n", -+ i2c->suspended); -+ dump_stack(); -+ ret = -EAGAIN; -+ goto out; -+ } -+ - ret = s3c24xx_i2c_set_master(i2c); - if (ret != 0) { - dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); -@@ -886,12 +905,25 @@ static int s3c24xx_i2c_remove(struct pla - } - - #ifdef CONFIG_PM --static int s3c24xx_i2c_resume(struct platform_device *dev) -+ -+static int s3c24xx_i2c_suspend(struct platform_device *dev, pm_message_t state) - { - struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); - - if (i2c != NULL) -+ i2c->suspended++; -+ -+ return 0; -+} -+ -+static int s3c24xx_i2c_resume(struct platform_device *dev) -+{ -+ struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); -+ -+ if (i2c != NULL) { - s3c24xx_i2c_init(i2c); -+ i2c->suspended--; -+ } - - return 0; - } -@@ -905,6 +937,7 @@ static int s3c24xx_i2c_resume(struct pla - static struct platform_driver s3c2410_i2c_driver = { - .probe = s3c24xx_i2c_probe, - .remove = s3c24xx_i2c_remove, -+ .suspend = s3c24xx_i2c_suspend, - .resume = s3c24xx_i2c_resume, - .driver = { - .owner = THIS_MODULE, -@@ -915,6 +948,7 @@ static struct platform_driver s3c2410_i2 - static struct platform_driver s3c2440_i2c_driver = { - .probe = s3c24xx_i2c_probe, - .remove = s3c24xx_i2c_remove, -+ .suspend = s3c24xx_i2c_suspend, - .resume = s3c24xx_i2c_resume, - .driver = { - .owner = THIS_MODULE, -Index: linux-2.6.24.7/drivers/i2c/chips/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/i2c/chips/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/i2c/chips/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -51,6 +51,26 @@ config SENSORS_EEPROM - This driver can also be built as a module. If so, the module - will be called eeprom. - -+config SENSORS_PCF50606 -+ tristate "Philips/NXP PCF50606" -+ depends on I2C -+ help -+ If you say yes here you get support for Philips/NXP PCF50606 -+ PMU (Power Management Unit) chips. -+ -+ This driver can also be built as a module. If so, the module -+ will be called pcf50606. -+ -+config SENSORS_PCF50633 -+ tristate "Philips PCF50633" -+ depends on I2C -+ help -+ If you say yes here you get support for Philips PCF50633 -+ PMU (Power Management Unit) chips. -+ -+ This driver can also be built as a module. If so, the module -+ will be called pcf50633. -+ - config SENSORS_PCF8574 - tristate "Philips PCF8574 and PCF8574A" - depends on EXPERIMENTAL -@@ -163,4 +183,23 @@ config MENELAUS - and other features that are often used in portable devices like - cell phones and PDAs. - -+config SENSORS_TSL256X -+ tristate "Texas TSL256X Ambient Light Sensor" -+ depends on I2C -+ help -+ If you say yes here you get support for the Texas TSL256X -+ ambient light sensor chip. -+ -+ This driver can also be built as a module. If so, the module -+ will be called tsl256x. -+ -+config PCA9632 -+ tristate "Philips/NXP PCA9632 low power LED driver" -+ depends on I2C -+ help -+ If you say yes here you get support for the Philips/NXP PCA9632 -+ LED driver. -+ -+ This driver can also be built as a module. If so, the module -+ will be called pca9632. - endmenu -Index: linux-2.6.24.7/drivers/i2c/chips/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/i2c/chips/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/i2c/chips/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -9,12 +9,16 @@ obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o - obj-$(CONFIG_SENSORS_MAX6875) += max6875.o - obj-$(CONFIG_SENSORS_M41T00) += m41t00.o - obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o -+obj-$(CONFIG_SENSORS_PCF50606) += pcf50606.o -+obj-$(CONFIG_SENSORS_PCF50633) += pcf50633.o - obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o - obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o - obj-$(CONFIG_TPS65010) += tps65010.o - obj-$(CONFIG_MENELAUS) += menelaus.o - obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o -+obj-$(CONFIG_SENSORS_TSL256X) += tsl256x.o -+obj-$(CONFIG_PCA9632) += pca9632.o - - ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) - EXTRA_CFLAGS += -DDEBUG -Index: linux-2.6.24.7/drivers/i2c/chips/pca9632.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/i2c/chips/pca9632.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,551 @@ -+/* -+ * Philips/NXP PCA9632 low power LED driver. -+ * Copyright (C) 2008 Matt Hsu -+ * -+ * low_level implementation are based on pcf50606 driver -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ * -+ * TODO: -+ * - attach ledclass?? -+ * - add platform data -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include "pca9632.h" -+ -+/* Addresses to scan */ -+static unsigned short normal_i2c[] = { 0x62, I2C_CLIENT_END }; -+ -+/* Insmod parameters */ -+I2C_CLIENT_INSMOD_1(pca9632); -+ -+enum pca9632_pwr_state { -+ PCA9632_NORMAL, -+ PCA9632_SLEEP, -+}; -+ -+enum pca9632_led_output { -+ PCA9632_OFF, -+ PCA9632_ON, -+ PCA9632_CTRL_BY_PWM, -+ PCA9632_CTRL_BY_PWM_GRPPWM, -+}; -+ -+static const char *led_output_name[] = { -+ [PCA9632_OFF] = "off", -+ [PCA9632_ON] = "fully-on", -+ [PCA9632_CTRL_BY_PWM] = "ctrl-by-pwm", -+ [PCA9632_CTRL_BY_PWM_GRPPWM] = "ctrl-by-pwm-grppwm", -+}; -+ -+struct pca9632_data { -+ struct i2c_client client; -+ struct mutex lock; -+}; -+ -+static struct i2c_driver pca9632_driver; -+static struct platform_device *pca9632_pdev; -+ -+static int pca9632_attach_adapter(struct i2c_adapter *adapter); -+static int pca9632_detach_client(struct i2c_client *client); -+ -+static int __reg_write(struct pca9632_data *pca, u_int8_t reg, u_int8_t val) -+{ -+ return i2c_smbus_write_byte_data(&pca->client, reg, val); -+} -+ -+static int reg_write(struct pca9632_data *pca, u_int8_t reg, u_int8_t val) -+{ -+ int ret; -+ -+ mutex_lock(&pca->lock); -+ ret = __reg_write(pca, reg, val); -+ mutex_unlock(&pca->lock); -+ -+ return ret; -+} -+ -+static int32_t __reg_read(struct pca9632_data *pca, u_int8_t reg) -+{ -+ int32_t ret; -+ -+ ret = i2c_smbus_read_byte_data(&pca->client, reg); -+ -+ return ret; -+} -+ -+static u_int8_t reg_read(struct pca9632_data *pca, u_int8_t reg) -+{ -+ int32_t ret; -+ -+ mutex_lock(&pca->lock); -+ ret = __reg_read(pca, reg); -+ mutex_unlock(&pca->lock); -+ -+ return ret & 0xff; -+} -+ -+static int reg_set_bit_mask(struct pca9632_data *pca, -+ u_int8_t reg, u_int8_t mask, u_int8_t val) -+{ -+ int ret; -+ u_int8_t tmp; -+ -+ val &= mask; -+ -+ mutex_lock(&pca->lock); -+ -+ tmp = __reg_read(pca, reg); -+ tmp &= ~mask; -+ tmp |= val; -+ ret = __reg_write(pca, reg, tmp); -+ -+ mutex_unlock(&pca->lock); -+ -+ return ret; -+} -+ -+static inline int calc_dc(uint8_t idc) -+{ -+ return (idc * 100) / 256; -+} -+ -+/* -+ * Software reset -+ */ -+static int software_rst(struct i2c_adapter *adapter) -+{ -+ u8 buf[] = { 0xa5, 0x5a }; -+ -+ struct i2c_msg msg[] = { -+ { -+ .addr = 0x3, -+ .flags = 0, -+ .buf = &buf, -+ .len = sizeof(buf) -+ } -+ }; -+ -+ return i2c_transfer(adapter, msg, 1); -+} -+ -+/* -+ * Group dmblnk control -+ */ -+static void config_group_dmblnk(struct pca9632_data *pca, int group_dmblnk_mode) -+{ -+ reg_set_bit_mask(pca, PCA9632_REG_MODE2, 0x20, -+ group_dmblnk_mode << PCA9632_DMBLNK_SHIFT); -+} -+ -+static int get_group_dmblnk(struct pca9632_data *pca) -+{ -+ return reg_read(pca, PCA9632_REG_MODE2) >> PCA9632_DMBLNK_SHIFT; -+} -+ -+static ssize_t show_group_dmblnk(struct device *dev, struct device_attribute -+ *attr, char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ -+ if (get_group_dmblnk(pca)) -+ return sprintf(buf, "blinking\n"); -+ else -+ return sprintf(buf, "dimming\n"); -+} -+ -+static ssize_t set_group_dmblnk(struct device *dev, struct device_attribute -+ *attr, const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ unsigned int mode = simple_strtoul(buf, NULL, 10); -+ -+ if (mode) -+ dev_info(&pca->client.dev, "blinking\n"); -+ else -+ dev_info(&pca->client.dev, "dimming\n"); -+ -+ config_group_dmblnk(pca, mode); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(group_dmblnk, S_IRUGO | S_IWUSR, show_group_dmblnk, -+ set_group_dmblnk); -+ -+static int reg_id_by_name(const char *name) -+{ -+ int reg_id = -1; -+ -+ if (!strncmp(name, "led0", 4)) -+ reg_id = PCA9632_REG_PWM0; -+ else if (!strncmp(name, "led1", 4)) -+ reg_id = PCA9632_REG_PWM1; -+ else if (!strncmp(name, "led2", 4)) -+ reg_id = PCA9632_REG_PWM2; -+ else if (!strncmp(name, "led3", 4)) -+ reg_id = PCA9632_REG_PWM3; -+ -+ return reg_id; -+} -+ -+static int get_led_output(struct pca9632_data *pca, int ldrx) -+{ -+ u_int8_t led_state; -+ -+ ldrx = ldrx - 2; -+ led_state = reg_read(pca, PCA9632_REG_LEDOUT); -+ led_state = (led_state >> (2 * ldrx)) & 0x03; -+ -+ return led_state; -+} -+ -+static void config_led_output(struct pca9632_data *pca, int ldrx, -+ enum pca9632_led_output led_output) -+{ -+ u_int8_t mask; -+ int tmp; -+ -+ ldrx = ldrx - 2; -+ mask = 0x03 << (2 * ldrx); -+ tmp = reg_set_bit_mask(pca, PCA9632_REG_LEDOUT, -+ mask, led_output << (2 * ldrx)); -+} -+ -+/* -+ * Individual brightness control -+ */ -+static ssize_t show_brightness(struct device *dev, struct device_attribute -+ *attr, char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ int ldrx; -+ -+ ldrx = reg_id_by_name(attr->attr.name); -+ -+ switch (get_led_output(pca, ldrx)) { -+ -+ case PCA9632_OFF: -+ case PCA9632_ON: -+ return sprintf(buf, "%s", -+ led_output_name[get_led_output(pca, ldrx)]); -+ -+ case PCA9632_CTRL_BY_PWM: -+ return sprintf(buf, "%d%% \n", calc_dc(reg_read(pca, ldrx))); -+ -+ case PCA9632_CTRL_BY_PWM_GRPPWM: -+ /* check group dmblnk */ -+ if (get_group_dmblnk(pca)) -+ return sprintf(buf, "%d%% \n", -+ calc_dc(reg_read(pca, ldrx))); -+ return sprintf(buf, "%d%% \n", -+ calc_dc((reg_read(pca, ldrx) & 0xfc))); -+ default: -+ break; -+ } -+ -+ return sprintf(buf, "invalid argument\n"); -+} -+ -+static ssize_t set_brightness(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ unsigned int pwm = simple_strtoul(buf, NULL, 10); -+ int ldrx; -+ -+ ldrx = reg_id_by_name(attr->attr.name); -+ reg_set_bit_mask(pca, ldrx, 0xff, pwm); -+ -+ return count; -+} -+ -+static -+DEVICE_ATTR(led0_pwm, S_IRUGO | S_IWUSR, show_brightness, set_brightness); -+static -+DEVICE_ATTR(led1_pwm, S_IRUGO | S_IWUSR, show_brightness, set_brightness); -+static -+DEVICE_ATTR(led2_pwm, S_IRUGO | S_IWUSR, show_brightness, set_brightness); -+static -+DEVICE_ATTR(led3_pwm, S_IRUGO | S_IWUSR, show_brightness, set_brightness); -+ -+/* -+ * Group frequency control -+ */ -+static ssize_t show_group_freq(struct device *dev, struct device_attribute -+ *attr, char *buf) -+{ -+ uint32_t period; -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ -+ period = ((reg_read(pca, PCA9632_REG_GRPFREQ) + 1) * 1000) / 24; -+ -+ return sprintf(buf, "%d ms\n", period); -+} -+ -+static ssize_t set_group_freq(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ -+ unsigned int freq = simple_strtoul(buf, NULL, 10); -+ reg_write(pca, PCA9632_REG_GRPFREQ, freq); -+ return count; -+} -+ -+static -+DEVICE_ATTR(group_freq, S_IRUGO | S_IWUSR, show_group_freq, set_group_freq); -+ -+/* -+ * Group duty cycle tonrol* -+ */ -+static ssize_t show_group_dc(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ -+ if (get_group_dmblnk(pca)) { -+ -+ if (reg_read(pca, PCA9632_REG_GRPFREQ) <= 0x03) -+ return sprintf(buf, "%d%% \n", -+ calc_dc(reg_read(pca, PCA9632_REG_GRPPWM) & 0xfc)); -+ -+ return sprintf(buf, "%d%% \n", calc_dc(reg_read(pca, -+ PCA9632_REG_GRPPWM))); -+ } -+ -+ return sprintf(buf, "%d%% \n", calc_dc(reg_read(pca, -+ PCA9632_REG_GRPPWM) & 0xf0)); -+} -+ -+static ssize_t set_group_dc(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ -+ unsigned int dc = simple_strtoul(buf, NULL, 10); -+ -+ reg_set_bit_mask(pca, PCA9632_REG_GRPPWM, 0xff, dc); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(group_dc, S_IRUGO | S_IWUSR, show_group_dc, set_group_dc); -+ -+/* -+ * LED driver output -+ */ -+static ssize_t show_led_output(struct device *dev, struct device_attribute -+ *attr, char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ int ldrx; -+ -+ ldrx = reg_id_by_name(attr->attr.name); -+ -+ return sprintf(buf, "%s \n", -+ led_output_name[get_led_output(pca, ldrx)]); -+ -+} -+static ssize_t set_led_output(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pca9632_data *pca = i2c_get_clientdata(client); -+ enum pca9632_led_output led_output; -+ int ldrx; -+ -+ led_output = simple_strtoul(buf, NULL, 10); -+ ldrx = reg_id_by_name(attr->attr.name); -+ config_led_output(pca, ldrx, led_output); -+ -+ return count; -+} -+ -+static -+DEVICE_ATTR(led0_output, S_IRUGO | S_IWUSR, show_led_output, set_led_output); -+static -+DEVICE_ATTR(led1_output, S_IRUGO | S_IWUSR, show_led_output, set_led_output); -+static -+DEVICE_ATTR(led2_output, S_IRUGO | S_IWUSR, show_led_output, set_led_output); -+static -+DEVICE_ATTR(led3_output, S_IRUGO | S_IWUSR, show_led_output, set_led_output); -+ -+static struct attribute *pca_sysfs_entries[] = { -+ &dev_attr_group_dmblnk.attr, -+ &dev_attr_led0_pwm.attr, -+ &dev_attr_led1_pwm.attr, -+ &dev_attr_led2_pwm.attr, -+ &dev_attr_led3_pwm.attr, -+ &dev_attr_group_dc.attr, -+ &dev_attr_group_freq.attr, -+ &dev_attr_led0_output.attr, -+ &dev_attr_led1_output.attr, -+ &dev_attr_led2_output.attr, -+ &dev_attr_led3_output.attr, -+ NULL -+}; -+ -+static struct attribute_group pca_attr_group = { -+ .name = NULL, /* put in device directory */ -+ .attrs = pca_sysfs_entries, -+}; -+ -+#ifdef CONFIG_PM -+static int pca9632_suspend(struct device *dev, pm_message_t state) -+{ -+ /* FIXME: Not implemented */ -+ return 0; -+} -+ -+static int pca9632_resume(struct device *dev) -+{ -+ /* FIXME: Not implemented */ -+ return 0; -+} -+#else -+#define pca9632_suspend NULL -+#define pca9632_resume NULL -+#endif -+ -+static struct i2c_driver pca9632_driver = { -+ .driver = { -+ .name = "pca9632", -+ .suspend = pca9632_suspend, -+ .resume = pca9632_resume, -+ }, -+ .id = I2C_DRIVERID_PCA9632, -+ .attach_adapter = pca9632_attach_adapter, -+ .detach_client = pca9632_detach_client, -+}; -+ -+static int pca9632_detect(struct i2c_adapter *adapter, int address, int kind) -+{ -+ struct i2c_client *new_client; -+ struct pca9632_data *pca; -+ int err; -+ -+ pca = kzalloc(sizeof(struct pca9632_data), GFP_KERNEL); -+ if (!pca) -+ return -ENOMEM; -+ -+ mutex_init(&pca->lock); -+ -+ new_client = &pca->client; -+ i2c_set_clientdata(new_client, pca); -+ new_client->addr = address; -+ new_client->adapter = adapter; -+ new_client->driver = &pca9632_driver; -+ new_client->flags = 0; -+ -+ strlcpy(new_client->name, "pca9632", I2C_NAME_SIZE); -+ -+ /* register with i2c core */ -+ err = i2c_attach_client(new_client); -+ if (err) -+ goto exit_kfree; -+ -+ err = sysfs_create_group(&new_client->dev.kobj, &pca_attr_group); -+ if (err) -+ goto exit_detach; -+ -+ /* software reset */ -+ if (!software_rst(adapter)) -+ dev_info(&pca->client.dev, "pca9632 sw-rst done\n"); -+ -+ /* enter normal mode */ -+ reg_set_bit_mask(pca, PCA9632_REG_MODE1, 0x10, PCA9632_NORMAL); -+ -+ return 0; -+ -+exit_detach: -+ i2c_detach_client(new_client); -+exit_kfree: -+ kfree(pca); -+ -+ return err; -+} -+ -+static int pca9632_attach_adapter(struct i2c_adapter *adapter) -+{ -+ return i2c_probe(adapter, &addr_data, pca9632_detect); -+} -+ -+static int pca9632_detach_client(struct i2c_client *client) -+{ -+ int err; -+ -+ sysfs_remove_group(&client->dev.kobj, &pca_attr_group); -+ err = i2c_detach_client(client); -+ -+ if (err) -+ return err; -+ -+ kfree(i2c_get_clientdata(client)); -+ -+ return 0; -+} -+ -+static int __init pca9632_plat_probe(struct platform_device *pdev) -+{ -+ /* FIXME: platform data should be attached here */ -+ pca9632_pdev = pdev; -+ -+ return 0; -+} -+ -+static int pca9632_plat_remove(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+static struct platform_driver pca9632_plat_driver = { -+ .probe = pca9632_plat_probe, -+ .remove = pca9632_plat_remove, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "pca9632", -+ }, -+}; -+ -+static int __init pca9632_init(void) -+{ -+ int rc; -+ -+ rc = platform_driver_register(&pca9632_plat_driver); -+ if (!rc) -+ i2c_add_driver(&pca9632_driver); -+ -+ return rc; -+} -+ -+static void __exit pca9632_exit(void) -+{ -+ i2c_del_driver(&pca9632_driver); -+ -+ platform_driver_unregister(&pca9632_plat_driver); -+} -+ -+MODULE_AUTHOR("Matt Hsu "); -+MODULE_DESCRIPTION("NXP PCA9632 driver"); -+MODULE_LICENSE("GPL"); -+ -+module_init(pca9632_init); -+module_exit(pca9632_exit); -Index: linux-2.6.24.7/drivers/i2c/chips/pca9632.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/i2c/chips/pca9632.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,24 @@ -+#ifndef _PCA9632_H -+#define _PCA9632_H -+ -+ -+enum pca9632_regs{ -+ -+ PCA9632_REG_MODE1 = 0x00, -+ PCA9632_REG_MODE2 = 0x01, -+ PCA9632_REG_PWM0 = 0x02, -+ PCA9632_REG_PWM1 = 0x03, -+ PCA9632_REG_PWM2 = 0x04, -+ PCA9632_REG_PWM3 = 0x05, -+ PCA9632_REG_GRPPWM = 0x06, -+ PCA9632_REG_GRPFREQ = 0x07, -+ PCA9632_REG_LEDOUT = 0x08, -+ PCA9632_REG_SUBADDR1 = 0x09, -+ PCA9632_REG_SUBADDR2 = 0x0a, -+ PCA9632_REG_SUBADDR3 = 0x0b, -+ PCA9632_REG_ALLCALLADR1 = 0x0c, -+}; -+ -+#define PCA9632_DMBLNK_SHIFT 5 -+ -+#endif /* _PCA9632_H */ -Index: linux-2.6.24.7/drivers/i2c/chips/pcf50606.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/i2c/chips/pcf50606.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,2289 @@ -+/* Philips/NXP PCF50606 Power Management Unit (PMU) driver -+ * -+ * (C) 2006-2007 by Openmoko, Inc. -+ * Authors: Harald Welte , -+ * Matt Hsu -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ * This driver is a monster ;) It provides the following features -+ * - voltage control for a dozen different voltage domains -+ * - charging control for main and backup battery -+ * - rtc / alarm -+ * - watchdog -+ * - adc driver (hw_sensors like) -+ * - pwm driver -+ * - backlight -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "pcf50606.h" -+ -+/* we use dev_dbg() throughout the code, but sometimes don't want to -+ * write an entire line of debug related information. This DEBUGPC -+ * macro is a continuation for dev_dbg() */ -+#ifdef DEBUG -+#define DEBUGPC(x, args ...) printk(x, ## args) -+#else -+#define DEBUGPC(x, args ...) -+#endif -+ -+/*********************************************************************** -+ * Static data / structures -+ ***********************************************************************/ -+ -+static unsigned short normal_i2c[] = { 0x08, I2C_CLIENT_END }; -+ -+I2C_CLIENT_INSMOD_1(pcf50606); -+ -+#define PCF50606_B_CHG_FAST 0 /* Charger Fast allowed */ -+#define PCF50606_B_CHG_PRESENT 1 /* Charger present */ -+#define PCF50606_B_CHG_FOK 2 /* Fast OK for battery */ -+#define PCF50606_B_CHG_ERR 3 /* Charger Error */ -+#define PCF50606_B_CHG_PROT 4 /* Charger Protection */ -+#define PCF50606_B_CHG_READY 5 /* Charging completed */ -+ -+#define PCF50606_F_CHG_FAST (1<suspend_state == PCF50606_SS_COMPLETED_SUSPEND) { -+ dev_err(&pcf->client.dev, "__reg_write while suspended.\n"); -+ dump_stack(); -+ } -+ return i2c_smbus_write_byte_data(&pcf->client, reg, val); -+} -+ -+static int reg_write(struct pcf50606_data *pcf, u_int8_t reg, u_int8_t val) -+{ -+ int ret; -+ -+ mutex_lock(&pcf->lock); -+ ret = __reg_write(pcf, reg, val); -+ mutex_unlock(&pcf->lock); -+ -+ return ret; -+} -+ -+static inline int32_t __reg_read(struct pcf50606_data *pcf, u_int8_t reg) -+{ -+ int32_t ret; -+ -+ if (pcf->suspend_state == PCF50606_SS_COMPLETED_SUSPEND) { -+ dev_err(&pcf->client.dev, "__reg_read while suspended.\n"); -+ dump_stack(); -+ } -+ ret = i2c_smbus_read_byte_data(&pcf->client, reg); -+ -+ return ret; -+} -+ -+static u_int8_t reg_read(struct pcf50606_data *pcf, u_int8_t reg) -+{ -+ int32_t ret; -+ -+ mutex_lock(&pcf->lock); -+ ret = __reg_read(pcf, reg); -+ mutex_unlock(&pcf->lock); -+ -+ return ret & 0xff; -+} -+ -+static int reg_set_bit_mask(struct pcf50606_data *pcf, -+ u_int8_t reg, u_int8_t mask, u_int8_t val) -+{ -+ int ret; -+ u_int8_t tmp; -+ -+ val &= mask; -+ -+ mutex_lock(&pcf->lock); -+ -+ tmp = __reg_read(pcf, reg); -+ tmp &= ~mask; -+ tmp |= val; -+ ret = __reg_write(pcf, reg, tmp); -+ -+ mutex_unlock(&pcf->lock); -+ -+ return ret; -+} -+ -+static int reg_clear_bits(struct pcf50606_data *pcf, u_int8_t reg, u_int8_t val) -+{ -+ int ret; -+ u_int8_t tmp; -+ -+ mutex_lock(&pcf->lock); -+ -+ tmp = __reg_read(pcf, reg); -+ tmp &= ~val; -+ ret = __reg_write(pcf, reg, tmp); -+ -+ mutex_unlock(&pcf->lock); -+ -+ return ret; -+} -+ -+/* synchronously read one ADC channel (busy-wait for result to be complete) */ -+static u_int16_t adc_read(struct pcf50606_data *pcf, int channel, -+ u_int16_t *data2) -+{ -+ u_int8_t adcs2, adcs1; -+ u_int16_t ret; -+ -+ dev_dbg(&pcf->client.dev, "entering (pcf=%p, channel=%u, data2=%p)\n", -+ pcf, channel, data2); -+ -+ channel &= PCF50606_ADCC2_ADCMUX_MASK; -+ -+ mutex_lock(&pcf->lock); -+ -+ /* start ADC conversion of selected channel */ -+ __reg_write(pcf, PCF50606_REG_ADCC2, channel | -+ PCF50606_ADCC2_ADCSTART | PCF50606_ADCC2_RES_10BIT); -+ -+ do { -+ adcs2 = __reg_read(pcf, PCF50606_REG_ADCS2); -+ } while (!(adcs2 & PCF50606_ADCS2_ADCRDY)); -+ -+ adcs1 = __reg_read(pcf, PCF50606_REG_ADCS1); -+ ret = (adcs1 << 2) | (adcs2 & 0x03); -+ -+ if (data2) { -+ adcs1 = __reg_read(pcf, PCF50606_REG_ADCS3); -+ *data2 = (adcs1 << 2) | ((adcs2 & 0x0c) >> 2); -+ } -+ -+ mutex_unlock(&pcf->lock); -+ -+ dev_dbg(&pcf->client.dev, "returning %u %u\n", ret, -+ data2 ? *data2 : 0); -+ -+ return ret; -+} -+ -+/*********************************************************************** -+ * Voltage / ADC -+ ***********************************************************************/ -+ -+static u_int8_t dcudc_voltage(unsigned int millivolts) -+{ -+ if (millivolts < 900) -+ return 0; -+ if (millivolts > 5500) -+ return 0x1f; -+ if (millivolts <= 3300) { -+ millivolts -= 900; -+ return millivolts/300; -+ } -+ if (millivolts < 4000) -+ return 0x0f; -+ else { -+ millivolts -= 4000; -+ return millivolts/100; -+ } -+} -+ -+static unsigned int dcudc_2voltage(u_int8_t bits) -+{ -+ bits &= 0x1f; -+ if (bits < 0x08) -+ return 900 + bits * 300; -+ else if (bits < 0x10) -+ return 3300; -+ else -+ return 4000 + bits * 100; -+} -+ -+static u_int8_t dcdec_voltage(unsigned int millivolts) -+{ -+ if (millivolts < 900) -+ return 0; -+ else if (millivolts > 3300) -+ return 0x0f; -+ -+ millivolts -= 900; -+ return millivolts/300; -+} -+ -+static unsigned int dcdec_2voltage(u_int8_t bits) -+{ -+ bits &= 0x0f; -+ return 900 + bits*300; -+} -+ -+static u_int8_t dcdc_voltage(unsigned int millivolts) -+{ -+ if (millivolts < 900) -+ return 0; -+ else if (millivolts > 3600) -+ return 0x1f; -+ -+ if (millivolts < 1500) { -+ millivolts -= 900; -+ return millivolts/25; -+ } else { -+ millivolts -= 1500; -+ return 0x18 + millivolts/300; -+ } -+} -+ -+static unsigned int dcdc_2voltage(u_int8_t bits) -+{ -+ bits &= 0x1f; -+ if ((bits & 0x18) == 0x18) -+ return 1500 + ((bits & 0x7) * 300); -+ else -+ return 900 + (bits * 25); -+} -+ -+static u_int8_t dx_voltage(unsigned int millivolts) -+{ -+ if (millivolts < 900) -+ return 0; -+ else if (millivolts > 3300) -+ return 0x18; -+ -+ millivolts -= 900; -+ return millivolts/100; -+} -+ -+static unsigned int dx_2voltage(u_int8_t bits) -+{ -+ bits &= 0x1f; -+ return 900 + (bits * 100); -+} -+ -+static const u_int8_t regulator_registers[__NUM_PCF50606_REGULATORS] = { -+ [PCF50606_REGULATOR_DCD] = PCF50606_REG_DCDC1, -+ [PCF50606_REGULATOR_DCDE] = PCF50606_REG_DCDEC1, -+ [PCF50606_REGULATOR_DCUD] = PCF50606_REG_DCUDC1, -+ [PCF50606_REGULATOR_D1REG] = PCF50606_REG_D1REGC1, -+ [PCF50606_REGULATOR_D2REG] = PCF50606_REG_D2REGC1, -+ [PCF50606_REGULATOR_D3REG] = PCF50606_REG_D3REGC1, -+ [PCF50606_REGULATOR_LPREG] = PCF50606_REG_LPREGC1, -+ [PCF50606_REGULATOR_IOREG] = PCF50606_REG_IOREGC, -+}; -+ -+int pcf50606_onoff_set(struct pcf50606_data *pcf, -+ enum pcf50606_regulator_id reg, int on) -+{ -+ u_int8_t addr; -+ -+ if (reg >= __NUM_PCF50606_REGULATORS) -+ return -EINVAL; -+ -+ /* IOREG cannot be powered off since it powers the PMU I2C */ -+ if (reg == PCF50606_REGULATOR_IOREG) -+ return -EIO; -+ -+ addr = regulator_registers[reg]; -+ -+ if (on == 0) -+ reg_set_bit_mask(pcf, addr, 0xe0, 0x00); -+ else -+ reg_set_bit_mask(pcf, addr, 0xe0, 0xe0); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(pcf50606_onoff_set); -+ -+int pcf50606_onoff_get(struct pcf50606_data *pcf, -+ enum pcf50606_regulator_id reg) -+{ -+ u_int8_t val, addr; -+ -+ if (reg >= __NUM_PCF50606_REGULATORS) -+ return -EINVAL; -+ -+ addr = regulator_registers[reg]; -+ val = (reg_read(pcf, addr) & 0xe0) >> 5; -+ -+ /* PWREN1 = 1, PWREN2 = 1, see table 16 of datasheet */ -+ switch (val) { -+ case 0: -+ case 5: -+ return 0; -+ default: -+ return 1; -+ } -+} -+EXPORT_SYMBOL_GPL(pcf50606_onoff_get); -+ -+int pcf50606_voltage_set(struct pcf50606_data *pcf, -+ enum pcf50606_regulator_id reg, -+ unsigned int millivolts) -+{ -+ u_int8_t volt_bits; -+ u_int8_t regnr; -+ int rc; -+ -+ dev_dbg(&pcf->client.dev, "pcf=%p, reg=%d, mvolts=%d\n", pcf, reg, -+ millivolts); -+ -+ if (reg >= __NUM_PCF50606_REGULATORS) -+ return -EINVAL; -+ -+ if (millivolts > pcf->pdata->rails[reg].voltage.max) -+ return -EINVAL; -+ -+ switch (reg) { -+ case PCF50606_REGULATOR_DCD: -+ volt_bits = dcdc_voltage(millivolts); -+ rc = reg_set_bit_mask(pcf, PCF50606_REG_DCDC1, 0x1f, -+ volt_bits); -+ break; -+ case PCF50606_REGULATOR_DCDE: -+ volt_bits = dcdec_voltage(millivolts); -+ rc = reg_set_bit_mask(pcf, PCF50606_REG_DCDEC1, 0x0f, -+ volt_bits); -+ break; -+ case PCF50606_REGULATOR_DCUD: -+ volt_bits = dcudc_voltage(millivolts); -+ rc = reg_set_bit_mask(pcf, PCF50606_REG_DCUDC1, 0x1f, -+ volt_bits); -+ break; -+ case PCF50606_REGULATOR_D1REG: -+ case PCF50606_REGULATOR_D2REG: -+ case PCF50606_REGULATOR_D3REG: -+ regnr = PCF50606_REG_D1REGC1 + (reg - PCF50606_REGULATOR_D1REG); -+ volt_bits = dx_voltage(millivolts); -+ rc = reg_set_bit_mask(pcf, regnr, 0x1f, volt_bits); -+ break; -+ case PCF50606_REGULATOR_LPREG: -+ volt_bits = dx_voltage(millivolts); -+ rc = reg_set_bit_mask(pcf, PCF50606_REG_LPREGC1, 0x1f, -+ volt_bits); -+ break; -+ case PCF50606_REGULATOR_IOREG: -+ if (millivolts < 1800) -+ return -EINVAL; -+ volt_bits = dx_voltage(millivolts); -+ rc = reg_set_bit_mask(pcf, PCF50606_REG_IOREGC, 0x1f, -+ volt_bits); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return rc; -+} -+EXPORT_SYMBOL_GPL(pcf50606_voltage_set); -+ -+unsigned int pcf50606_voltage_get(struct pcf50606_data *pcf, -+ enum pcf50606_regulator_id reg) -+{ -+ u_int8_t volt_bits; -+ u_int8_t regnr; -+ unsigned int rc = 0; -+ -+ if (reg >= __NUM_PCF50606_REGULATORS) -+ return -EINVAL; -+ -+ switch (reg) { -+ case PCF50606_REGULATOR_DCD: -+ volt_bits = reg_read(pcf, PCF50606_REG_DCDC1) & 0x1f; -+ rc = dcdc_2voltage(volt_bits); -+ break; -+ case PCF50606_REGULATOR_DCDE: -+ volt_bits = reg_read(pcf, PCF50606_REG_DCDEC1) & 0x0f; -+ rc = dcdec_2voltage(volt_bits); -+ break; -+ case PCF50606_REGULATOR_DCUD: -+ volt_bits = reg_read(pcf, PCF50606_REG_DCUDC1) & 0x1f; -+ rc = dcudc_2voltage(volt_bits); -+ break; -+ case PCF50606_REGULATOR_D1REG: -+ case PCF50606_REGULATOR_D2REG: -+ case PCF50606_REGULATOR_D3REG: -+ regnr = PCF50606_REG_D1REGC1 + (reg - PCF50606_REGULATOR_D1REG); -+ volt_bits = reg_read(pcf, regnr) & 0x1f; -+ if (volt_bits > 0x18) -+ volt_bits = 0x18; -+ rc = dx_2voltage(volt_bits); -+ break; -+ case PCF50606_REGULATOR_LPREG: -+ volt_bits = reg_read(pcf, PCF50606_REG_LPREGC1) & 0x1f; -+ if (volt_bits > 0x18) -+ volt_bits = 0x18; -+ rc = dx_2voltage(volt_bits); -+ break; -+ case PCF50606_REGULATOR_IOREG: -+ volt_bits = reg_read(pcf, PCF50606_REG_IOREGC) & 0x1f; -+ if (volt_bits > 0x18) -+ volt_bits = 0x18; -+ rc = dx_2voltage(volt_bits); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return rc; -+} -+EXPORT_SYMBOL_GPL(pcf50606_voltage_get); -+ -+/* go into 'STANDBY' mode, i.e. power off the main CPU and peripherals */ -+void pcf50606_go_standby(void) -+{ -+ reg_write(pcf50606_global, PCF50606_REG_OOCC1, -+ PCF50606_OOCC1_GOSTDBY); -+} -+EXPORT_SYMBOL_GPL(pcf50606_go_standby); -+ -+void pcf50606_gpo0_set(struct pcf50606_data *pcf, int on) -+{ -+ u_int8_t val; -+ -+ if (on) -+ val = 0x07; -+ else -+ val = 0x0f; -+ -+ reg_set_bit_mask(pcf, PCF50606_REG_GPOC1, 0x0f, val); -+} -+EXPORT_SYMBOL_GPL(pcf50606_gpo0_set); -+ -+int pcf50606_gpo0_get(struct pcf50606_data *pcf) -+{ -+ u_int8_t reg = reg_read(pcf, PCF50606_REG_GPOC1) & 0x0f; -+ -+ if (reg == 0x07 || reg == 0x08) -+ return 1; -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(pcf50606_gpo0_get); -+ -+static void pcf50606_work(struct work_struct *work) -+{ -+ struct pcf50606_data *pcf = -+ container_of(work, struct pcf50606_data, work); -+ u_int8_t pcfirq[3]; -+ int ret; -+ -+ mutex_lock(&pcf->working_lock); -+ pcf->working = 1; -+ -+ /* sanity */ -+ if (!&pcf->client.dev) -+ goto bail; -+ -+ /* -+ * if we are presently suspending, we are not in a position to deal -+ * with pcf50606 interrupts at all. -+ * -+ * Because we didn't clear the int pending registers, there will be -+ * no edge / interrupt waiting for us when we wake. But it is OK -+ * because at the end of our resume, we call this workqueue function -+ * gratuitously, clearing the pending register and re-enabling -+ * servicing this interrupt. -+ */ -+ -+ if ((pcf->suspend_state == PCF50606_SS_STARTING_SUSPEND) || -+ (pcf->suspend_state == PCF50606_SS_COMPLETED_SUSPEND)) -+ goto bail; -+ -+ /* -+ * If we are inside suspend -> resume completion time we don't attempt -+ * service until we have fully resumed. Although we could talk to the -+ * device as soon as I2C is up, the regs in the device which we might -+ * choose to modify as part of the service action have not been -+ * reloaded with their pre-suspend states yet. Therefore we will -+ * defer our service if we are called like that until our resume has -+ * completed. -+ * -+ * This shouldn't happen any more because we disable servicing this -+ * interrupt in suspend and don't re-enable it until resume is -+ * completed. -+ */ -+ -+ if (pcf->suspend_state && -+ (pcf->suspend_state != PCF50606_SS_COMPLETED_RESUME)) -+ goto reschedule; -+ -+ /* this is the case early in resume! Sanity check! */ -+ if (i2c_get_clientdata(&pcf->client) == NULL) -+ goto reschedule; -+ -+ /* -+ * p35 pcf50606 datasheet rev 2.2: -+ * ''The system controller shall read all interrupt registers in -+ * one I2C read action'' -+ * because if you don't INT# gets stuck asserted forever after a -+ * while -+ */ -+ ret = i2c_smbus_read_i2c_block_data(&pcf->client, PCF50606_REG_INT1, -+ sizeof(pcfirq), pcfirq); -+ if (ret != sizeof(pcfirq)) { -+ DEBUGPC("Oh crap PMU IRQ register read failed %d\n", ret); -+ /* -+ * it shouldn't fail, we no longer attempt to use -+ * I2C while it can be suspended. But we don't have -+ * much option but to retry if if it ever did fail, -+ * because if we don't service the interrupt to clear -+ * it, we will never see another PMU interrupt edge. -+ */ -+ goto reschedule; -+ } -+ -+ /* hey did we just resume? (because we don't get here unless we are -+ * running normally or the first call after resumption) -+ * -+ * pcf50606 resume is really really over now then. -+ */ -+ if (pcf->suspend_state != PCF50606_SS_RUNNING) { -+ pcf->suspend_state = PCF50606_SS_RUNNING; -+ -+ /* peek at the IRQ reason, if power button then set a flag -+ * so that we do not signal the event to userspace -+ */ -+ if (pcfirq[0] & (PCF50606_INT1_ONKEYF | PCF50606_INT1_ONKEYR)) { -+ pcf->suppress_onkey_events = 1; -+ dev_dbg(&pcf->client.dev, -+ "Wake by ONKEY, suppressing ONKEY events"); -+ } else { -+ pcf->suppress_onkey_events = 0; -+ } -+ } -+ -+ if (!pcf->coldplug_done) { -+ DEBUGPC("PMU Coldplug init\n"); -+ -+ /* we used SECOND to kick ourselves started -- turn it off */ -+ pcfirq[0] &= ~PCF50606_INT1_SECOND; -+ reg_set_bit_mask(pcf, PCF50606_REG_INT1M, PCF50606_INT1_SECOND, -+ PCF50606_INT1_SECOND); -+ -+ /* coldplug the USB if present */ -+ if (__reg_read(pcf, PCF50606_REG_OOCS) & PCF50606_OOCS_EXTON) { -+ /* Charger inserted */ -+ DEBUGPC("COLD CHGINS "); -+ input_report_key(pcf->input_dev, KEY_BATTERY, 1); -+ apm_queue_event(APM_POWER_STATUS_CHANGE); -+ pcf->flags |= PCF50606_F_CHG_PRESENT; -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50606_FEAT_MBC, -+ PMU_EVT_INSERT); -+ } -+ -+ pcf->coldplug_done = 1; -+ } -+ -+ -+ dev_dbg(&pcf->client.dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x:", -+ pcfirq[0], pcfirq[1], pcfirq[2]); -+ -+ if (pcfirq[0] & PCF50606_INT1_ONKEYF) { -+ /* ONKEY falling edge (start of button press) */ -+ pcf->flags |= PCF50606_F_PWR_PRESSED; -+ if (!pcf->suppress_onkey_events) { -+ DEBUGPC("ONKEYF "); -+ input_report_key(pcf->input_dev, KEY_POWER, 1); -+ } else { -+ DEBUGPC("ONKEYF(unreported) "); -+ } -+ } -+ if (pcfirq[0] & PCF50606_INT1_ONKEY1S) { -+ /* ONKEY pressed for more than 1 second */ -+ pcf->onkey_seconds = 0; -+ DEBUGPC("ONKEY1S "); -+ /* Tell PMU we are taking care of this */ -+ reg_set_bit_mask(pcf, PCF50606_REG_OOCC1, -+ PCF50606_OOCC1_TOTRST, -+ PCF50606_OOCC1_TOTRST); -+ /* enable SECOND interrupt (hz tick) */ -+ reg_clear_bits(pcf, PCF50606_REG_INT1M, PCF50606_INT1_SECOND); -+ } -+ if (pcfirq[0] & PCF50606_INT1_ONKEYR) { -+ /* ONKEY rising edge (end of button press) */ -+ pcf->flags &= ~PCF50606_F_PWR_PRESSED; -+ pcf->onkey_seconds = -1; -+ if (!pcf->suppress_onkey_events) { -+ DEBUGPC("ONKEYR "); -+ input_report_key(pcf->input_dev, KEY_POWER, 0); -+ } else { -+ DEBUGPC("ONKEYR(suppressed) "); -+ /* don't suppress any more power button events */ -+ pcf->suppress_onkey_events = 0; -+ } -+ /* disable SECOND interrupt in case RTC didn't -+ * request it */ -+ if (!(pcf->flags & PCF50606_F_RTC_SECOND)) -+ reg_set_bit_mask(pcf, PCF50606_REG_INT1M, -+ PCF50606_INT1_SECOND, -+ PCF50606_INT1_SECOND); -+ } -+ if (pcfirq[0] & PCF50606_INT1_EXTONR) { -+ DEBUGPC("EXTONR "); -+ input_report_key(pcf->input_dev, KEY_POWER2, 1); -+ } -+ if (pcfirq[0] & PCF50606_INT1_EXTONF) { -+ DEBUGPC("EXTONF "); -+ input_report_key(pcf->input_dev, KEY_POWER2, 0); -+ } -+ if (pcfirq[0] & PCF50606_INT1_SECOND) { -+ DEBUGPC("SECOND "); -+ if (pcf->flags & PCF50606_F_RTC_SECOND) -+ rtc_update_irq(pcf->rtc, 1, -+ RTC_PF | RTC_IRQF); -+ -+ if (pcf->onkey_seconds >= 0 && -+ pcf->flags & PCF50606_F_PWR_PRESSED) { -+ DEBUGPC("ONKEY_SECONDS(%u, OOCC1=0x%02x) ", -+ pcf->onkey_seconds, -+ reg_read(pcf, PCF50606_REG_OOCC1)); -+ pcf->onkey_seconds++; -+ if (pcf->onkey_seconds >= -+ pcf->pdata->onkey_seconds_required) { -+ /* Ask init to do 'ctrlaltdel' */ -+ /* -+ * currently Linux reacts badly to issuing a -+ * signal to PID #1 before init is started. -+ * What happens is that the next kernel thread -+ * to start, which is the JFFS2 Garbage -+ * collector in our case, gets the signal -+ * instead and proceeds to fail to fork -- -+ * which is very bad. Therefore we confirm -+ * PID #1 exists before issuing the signal -+ */ -+ if (find_task_by_pid(1)) { -+ kill_proc(1, SIGINT, 1); -+ DEBUGPC("SIGINT(init) "); -+ } -+ /* FIXME: what to do if userspace doesn't -+ * shut down? Do we want to force it? */ -+ } -+ } -+ } -+ if (pcfirq[0] & PCF50606_INT1_ALARM) { -+ DEBUGPC("ALARM "); -+ if (pcf->pdata->used_features & PCF50606_FEAT_RTC) -+ rtc_update_irq(pcf->rtc, 1, -+ RTC_AF | RTC_IRQF); -+ } -+ -+ if (pcfirq[1] & PCF50606_INT2_CHGINS) { -+ /* Charger inserted */ -+ DEBUGPC("CHGINS "); -+ input_report_key(pcf->input_dev, KEY_BATTERY, 1); -+ apm_queue_event(APM_POWER_STATUS_CHANGE); -+ pcf->flags |= PCF50606_F_CHG_PRESENT; -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50606_FEAT_MBC, PMU_EVT_INSERT); -+ /* FIXME: how to signal this to userspace */ -+ } -+ if (pcfirq[1] & PCF50606_INT2_CHGRM) { -+ /* Charger removed */ -+ DEBUGPC("CHGRM "); -+ input_report_key(pcf->input_dev, KEY_BATTERY, 0); -+ apm_queue_event(APM_POWER_STATUS_CHANGE); -+ pcf->flags &= ~(PCF50606_F_CHG_MASK|PCF50606_F_CHG_PRESENT); -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50606_FEAT_MBC, PMU_EVT_INSERT); -+ /* FIXME: how signal this to userspace */ -+ } -+ if (pcfirq[1] & PCF50606_INT2_CHGFOK) { -+ /* Battery ready for fast charging */ -+ DEBUGPC("CHGFOK "); -+ pcf->flags |= PCF50606_F_CHG_FOK; -+ /* FIXME: how to signal this to userspace */ -+ } -+ if (pcfirq[1] & PCF50606_INT2_CHGERR) { -+ /* Error in charge mode */ -+ DEBUGPC("CHGERR "); -+ pcf->flags |= PCF50606_F_CHG_ERR; -+ pcf->flags &= ~(PCF50606_F_CHG_FOK|PCF50606_F_CHG_READY); -+ /* FIXME: how to signal this to userspace */ -+ } -+ if (pcfirq[1] & PCF50606_INT2_CHGFRDY) { -+ /* Fast charge completed */ -+ DEBUGPC("CHGFRDY "); -+ pcf->flags |= PCF50606_F_CHG_READY; -+ pcf->flags &= ~PCF50606_F_CHG_FOK; -+ /* FIXME: how to signal this to userspace */ -+ } -+ if (pcfirq[1] & PCF50606_INT2_CHGPROT) { -+ /* Charging protection interrupt */ -+ DEBUGPC("CHGPROT "); -+ pcf->flags &= ~(PCF50606_F_CHG_FOK|PCF50606_F_CHG_READY); -+ /* FIXME: signal this to userspace */ -+ } -+ if (pcfirq[1] & PCF50606_INT2_CHGWD10S) { -+ /* Charger watchdog will expire in 10 seconds */ -+ DEBUGPC("CHGWD10S "); -+ reg_set_bit_mask(pcf, PCF50606_REG_OOCC1, -+ PCF50606_OOCC1_WDTRST, -+ PCF50606_OOCC1_WDTRST); -+ } -+ if (pcfirq[1] & PCF50606_INT2_CHGWDEXP) { -+ /* Charger watchdog expires */ -+ DEBUGPC("CHGWDEXP "); -+ /* FIXME: how to signal this to userspace */ -+ } -+ -+ if (pcfirq[2] & PCF50606_INT3_ADCRDY) { -+ /* ADC result ready */ -+ DEBUGPC("ADCRDY "); -+ } -+ if (pcfirq[2] & PCF50606_INT3_ACDINS) { -+ /* Accessory insertion detected */ -+ DEBUGPC("ACDINS "); -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50606_FEAT_ACD, PMU_EVT_INSERT); -+ } -+ if (pcfirq[2] & PCF50606_INT3_ACDREM) { -+ /* Accessory removal detected */ -+ DEBUGPC("ACDREM "); -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50606_FEAT_ACD, PMU_EVT_REMOVE); -+ } -+ /* FIXME: TSCPRES */ -+ if (pcfirq[2] & PCF50606_INT3_LOWBAT) { -+ if (__reg_read(pcf, PCF50606_REG_OOCS) & PCF50606_OOCS_EXTON) { -+ /* -+ * hey no need to freak out, we have some kind of -+ * valid charger power -+ */ -+ DEBUGPC("(NO)BAT "); -+ } else { -+ /* Really low battery voltage, we have 8 seconds left */ -+ DEBUGPC("LOWBAT "); -+ /* -+ * currently Linux reacts badly to issuing a signal to -+ * PID #1 before init is started. What happens is that -+ * the next kernel thread to start, which is the JFFS2 -+ * Garbage collector in our case, gets the signal -+ * instead and proceeds to fail to fork -- which is -+ * very bad. Therefore we confirm PID #1 exists -+ * before issuing SPIGPWR -+ */ -+ if (find_task_by_pid(1)) { -+ apm_queue_event(APM_LOW_BATTERY); -+ DEBUGPC("SIGPWR(init) "); -+ kill_proc(1, SIGPWR, 1); -+ } else -+ /* -+ * well, our situation is like this: we do not -+ * have any external power, we have a low -+ * battery and since PID #1 doesn't exist yet, -+ * we are early in the boot, likely before -+ * rootfs mount. We should just call it a day -+ */ -+ apm_queue_event(APM_CRITICAL_SUSPEND); -+ } -+ /* Tell PMU we are taking care of this */ -+ reg_set_bit_mask(pcf, PCF50606_REG_OOCC1, -+ PCF50606_OOCC1_TOTRST, -+ PCF50606_OOCC1_TOTRST); -+ } -+ if (pcfirq[2] & PCF50606_INT3_HIGHTMP) { -+ /* High temperature */ -+ DEBUGPC("HIGHTMP "); -+ apm_queue_event(APM_CRITICAL_SUSPEND); -+ } -+ -+ DEBUGPC("\n"); -+ -+bail: -+ pcf->working = 0; -+ input_sync(pcf->input_dev); -+ put_device(&pcf->client.dev); -+ mutex_unlock(&pcf->working_lock); -+ -+ return; -+ -+reschedule: -+ -+ if ((pcf->suspend_state != PCF50606_SS_STARTING_SUSPEND) && -+ (pcf->suspend_state != PCF50606_SS_COMPLETED_SUSPEND)) { -+ msleep(10); -+ dev_info(&pcf->client.dev, "rescheduling interrupt service\n"); -+ } -+ if (!schedule_work(&pcf->work)) -+ dev_err(&pcf->client.dev, "int service reschedule failed\n"); -+ -+ /* we don't put the device here, hold it for next time */ -+ mutex_unlock(&pcf->working_lock); -+} -+ -+static irqreturn_t pcf50606_irq(int irq, void *_pcf) -+{ -+ struct pcf50606_data *pcf = _pcf; -+ -+ dev_dbg(&pcf->client.dev, "entering(irq=%u, pcf=%p): scheduling work\n", -+ irq, _pcf); -+ get_device(&pcf->client.dev); -+ if (!schedule_work(&pcf->work) && !pcf->working) -+ dev_err(&pcf->client.dev, "pcf irq work already queued.\n"); -+ -+ return IRQ_HANDLED; -+} -+ -+static u_int16_t adc_to_batt_millivolts(u_int16_t adc) -+{ -+ u_int16_t mvolts; -+ -+ mvolts = (adc * 6000) / 1024; -+ -+ return mvolts; -+} -+ -+#define BATTVOLT_SCALE_START 2800 -+#define BATTVOLT_SCALE_END 4200 -+#define BATTVOLT_SCALE_DIVIDER ((BATTVOLT_SCALE_END - BATTVOLT_SCALE_START)/100) -+ -+static u_int8_t battvolt_scale(u_int16_t battvolt) -+{ -+ /* FIXME: this linear scale is completely bogus */ -+ u_int16_t battvolt_relative = battvolt - BATTVOLT_SCALE_START; -+ unsigned int percent = battvolt_relative / BATTVOLT_SCALE_DIVIDER; -+ -+ return percent; -+} -+ -+u_int16_t pcf50606_battvolt(struct pcf50606_data *pcf) -+{ -+ u_int16_t adc; -+ adc = adc_read(pcf, PCF50606_ADCMUX_BATVOLT_RES, NULL); -+ -+ return adc_to_batt_millivolts(adc); -+} -+EXPORT_SYMBOL_GPL(pcf50606_battvolt); -+ -+static ssize_t show_battvolt(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ -+ return sprintf(buf, "%u\n", pcf50606_battvolt(pcf)); -+} -+static DEVICE_ATTR(battvolt, S_IRUGO | S_IWUSR, show_battvolt, NULL); -+ -+static int reg_id_by_name(const char *name) -+{ -+ int reg_id; -+ -+ if (!strcmp(name, "voltage_dcd")) -+ reg_id = PCF50606_REGULATOR_DCD; -+ else if (!strcmp(name, "voltage_dcde")) -+ reg_id = PCF50606_REGULATOR_DCDE; -+ else if (!strcmp(name, "voltage_dcud")) -+ reg_id = PCF50606_REGULATOR_DCUD; -+ else if (!strcmp(name, "voltage_d1reg")) -+ reg_id = PCF50606_REGULATOR_D1REG; -+ else if (!strcmp(name, "voltage_d2reg")) -+ reg_id = PCF50606_REGULATOR_D2REG; -+ else if (!strcmp(name, "voltage_d3reg")) -+ reg_id = PCF50606_REGULATOR_D3REG; -+ else if (!strcmp(name, "voltage_lpreg")) -+ reg_id = PCF50606_REGULATOR_LPREG; -+ else if (!strcmp(name, "voltage_ioreg")) -+ reg_id = PCF50606_REGULATOR_IOREG; -+ else -+ reg_id = -1; -+ -+ return reg_id; -+} -+ -+static ssize_t show_vreg(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ unsigned int reg_id; -+ -+ reg_id = reg_id_by_name(attr->attr.name); -+ if (reg_id < 0) -+ return 0; -+ -+ if (pcf50606_onoff_get(pcf, reg_id) > 0) -+ return sprintf(buf, "%u\n", pcf50606_voltage_get(pcf, reg_id)); -+ else -+ return strlcpy(buf, "0\n", PAGE_SIZE); -+} -+ -+static ssize_t set_vreg(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ unsigned long mvolts = simple_strtoul(buf, NULL, 10); -+ unsigned int reg_id; -+ -+ reg_id = reg_id_by_name(attr->attr.name); -+ if (reg_id < 0) -+ return -EIO; -+ -+ dev_dbg(dev, "attempting to set %s(%d) to %lu mvolts\n", -+ attr->attr.name, reg_id, mvolts); -+ -+ if (mvolts == 0) { -+ pcf50606_onoff_set(pcf, reg_id, 0); -+ } else { -+ if (pcf50606_voltage_set(pcf, reg_id, mvolts) < 0) { -+ dev_warn(dev, "refusing to set %s(%d) to %lu mvolts " -+ "(max=%u)\n", attr->attr.name, reg_id, mvolts, -+ pcf->pdata->rails[reg_id].voltage.max); -+ return -EINVAL; -+ } -+ pcf50606_onoff_set(pcf, reg_id, 1); -+ } -+ -+ return count; -+} -+ -+static DEVICE_ATTR(voltage_dcd, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_dcde, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_dcud, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_d1reg, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_d2reg, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_d3reg, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_lpreg, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_ioreg, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+ -+/*********************************************************************** -+ * Charger Control -+ ***********************************************************************/ -+ -+/* Enable/disable fast charging (500mA in the GTA01) */ -+void pcf50606_charge_fast(struct pcf50606_data *pcf, int on) -+{ -+ if (!(pcf->pdata->used_features & PCF50606_FEAT_MBC)) -+ return; -+ -+ if (on) { -+ /* We can allow PCF to automatically charge -+ * using Ifast */ -+ pcf->flags |= PCF50606_F_CHG_FAST; -+ reg_set_bit_mask(pcf, PCF50606_REG_MBCC1, -+ PCF50606_MBCC1_AUTOFST, -+ PCF50606_MBCC1_AUTOFST); -+ } else { -+ pcf->flags &= ~PCF50606_F_CHG_FAST; -+ /* disable automatic fast-charge */ -+ reg_clear_bits(pcf, PCF50606_REG_MBCC1, -+ PCF50606_MBCC1_AUTOFST); -+ /* switch to idle mode to abort existing charge -+ * process */ -+ reg_set_bit_mask(pcf, PCF50606_REG_MBCC1, -+ PCF50606_MBCC1_CHGMOD_MASK, -+ PCF50606_MBCC1_CHGMOD_IDLE); -+ } -+} -+EXPORT_SYMBOL_GPL(pcf50606_charge_fast); -+ -+static inline u_int16_t adc_to_rntc(struct pcf50606_data *pcf, u_int16_t adc) -+{ -+ u_int32_t r_ntc = (adc * (u_int32_t)pcf->pdata->r_fix_batt) -+ / (1023 - adc); -+ -+ return r_ntc; -+} -+ -+static inline int16_t rntc_to_temp(u_int16_t rntc) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(ntc_table_10k_3370B); i++) { -+ if (rntc > ntc_table_10k_3370B[i]) -+ return i - 10; /* First element is -10 */ -+ } -+ return -99; /* Below our range */ -+} -+ -+static ssize_t show_battemp(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ u_int16_t adc; -+ -+ adc = adc_read(pcf, PCF50606_ADCMUX_BATTEMP, NULL); -+ -+ return sprintf(buf, "%d\n", rntc_to_temp(adc_to_rntc(pcf, adc))); -+} -+static DEVICE_ATTR(battemp, S_IRUGO | S_IWUSR, show_battemp, NULL); -+ -+static inline int16_t adc_to_chg_milliamps(struct pcf50606_data *pcf, -+ u_int16_t adc_adcin1, -+ u_int16_t adc_batvolt) -+{ -+ int32_t res = (adc_adcin1 - adc_batvolt) * 2400; -+ return (res * 1000) / (pcf->pdata->r_sense_milli * 1024); -+} -+ -+static ssize_t show_chgcur(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ u_int16_t adc_batvolt, adc_adcin1; -+ int16_t ma; -+ -+ adc_batvolt = adc_read(pcf, PCF50606_ADCMUX_BATVOLT_ADCIN1, -+ &adc_adcin1); -+ ma = adc_to_chg_milliamps(pcf, adc_adcin1, adc_batvolt); -+ -+ return sprintf(buf, "%d\n", ma); -+} -+static DEVICE_ATTR(chgcur, S_IRUGO | S_IWUSR, show_chgcur, NULL); -+ -+static const char *chgmode_names[] = { -+ [PCF50606_MBCC1_CHGMOD_QUAL] = "qualification", -+ [PCF50606_MBCC1_CHGMOD_PRE] = "pre", -+ [PCF50606_MBCC1_CHGMOD_TRICKLE] = "trickle", -+ [PCF50606_MBCC1_CHGMOD_FAST_CCCV] = "fast_cccv", -+ [PCF50606_MBCC1_CHGMOD_FAST_NOCC] = "fast_nocc", -+ [PCF50606_MBCC1_CHGMOD_FAST_NOCV] = "fast_nocv", -+ [PCF50606_MBCC1_CHGMOD_FAST_SW] = "fast_switch", -+ [PCF50606_MBCC1_CHGMOD_IDLE] = "idle", -+}; -+ -+static ssize_t show_chgmode(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ u_int8_t mbcc1 = reg_read(pcf, PCF50606_REG_MBCC1); -+ u_int8_t chgmod = (mbcc1 & PCF50606_MBCC1_CHGMOD_MASK); -+ -+ return sprintf(buf, "%s\n", chgmode_names[chgmod]); -+} -+ -+static ssize_t set_chgmode(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ u_int8_t mbcc1 = reg_read(pcf, PCF50606_REG_MBCC1); -+ -+ mbcc1 &= ~PCF50606_MBCC1_CHGMOD_MASK; -+ -+ if (!strcmp(buf, "qualification")) -+ mbcc1 |= PCF50606_MBCC1_CHGMOD_QUAL; -+ else if (!strcmp(buf, "pre")) -+ mbcc1 |= PCF50606_MBCC1_CHGMOD_PRE; -+ else if (!strcmp(buf, "trickle")) -+ mbcc1 |= PCF50606_MBCC1_CHGMOD_TRICKLE; -+ else if (!strcmp(buf, "fast_cccv")) -+ mbcc1 |= PCF50606_MBCC1_CHGMOD_FAST_CCCV; -+ /* We don't allow the other fast modes for security reasons */ -+ else if (!strcmp(buf, "idle")) -+ mbcc1 |= PCF50606_MBCC1_CHGMOD_IDLE; -+ else -+ return -EINVAL; -+ -+ reg_write(pcf, PCF50606_REG_MBCC1, mbcc1); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(chgmode, S_IRUGO | S_IWUSR, show_chgmode, set_chgmode); -+ -+static const char *chgstate_names[] = { -+ [PCF50606_B_CHG_FAST] = "fast_enabled", -+ [PCF50606_B_CHG_PRESENT] = "present", -+ [PCF50606_B_CHG_FOK] = "fast_ok", -+ [PCF50606_B_CHG_ERR] = "error", -+ [PCF50606_B_CHG_PROT] = "protection", -+ [PCF50606_B_CHG_READY] = "ready", -+}; -+ -+static ssize_t show_chgstate(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ char *b = buf; -+ int i; -+ -+ for (i = 0; i < 32; i++) -+ if (pcf->flags & (1 << i) && i < ARRAY_SIZE(chgstate_names)) -+ b += sprintf(b, "%s ", chgstate_names[i]); -+ -+ if (b > buf) -+ b += sprintf(b, "\n"); -+ -+ return b - buf; -+} -+static DEVICE_ATTR(chgstate, S_IRUGO | S_IWUSR, show_chgstate, NULL); -+ -+/*********************************************************************** -+ * APM emulation -+ ***********************************************************************/ -+ -+static void pcf50606_get_power_status(struct apm_power_info *info) -+{ -+ struct pcf50606_data *pcf = pcf50606_global; -+ u_int8_t mbcc1 = reg_read(pcf, PCF50606_REG_MBCC1); -+ u_int8_t chgmod = mbcc1 & PCF50606_MBCC1_CHGMOD_MASK; -+ u_int16_t battvolt = pcf50606_battvolt(pcf); -+ -+ if (reg_read(pcf, PCF50606_REG_OOCS) & PCF50606_OOCS_EXTON) -+ info->ac_line_status = APM_AC_ONLINE; -+ else -+ info->ac_line_status = APM_AC_OFFLINE; -+ -+ switch (chgmod) { -+ case PCF50606_MBCC1_CHGMOD_QUAL: -+ case PCF50606_MBCC1_CHGMOD_PRE: -+ case PCF50606_MBCC1_CHGMOD_IDLE: -+ info->battery_life = battvolt_scale(battvolt); -+ break; -+ default: -+ info->battery_status = APM_BATTERY_STATUS_CHARGING; -+ info->battery_flag = APM_BATTERY_FLAG_CHARGING; -+ break; -+ } -+} -+ -+/*********************************************************************** -+ * Battery driver interface -+ ***********************************************************************/ -+static int pcf50606_bat_get_property(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ u_int16_t adc, adc_adcin1; -+ u_int8_t mbcc1, chgmod; -+ struct pcf50606_data *pcf = pcf50606_global; -+ int ret = 0; -+ -+ switch (psp) { -+ -+ case POWER_SUPPLY_PROP_STATUS: -+ if (!(reg_read(pcf, PCF50606_REG_OOCS) & PCF50606_OOCS_EXTON)) { -+ /* No charger, clearly we're discharging then */ -+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING; -+ } else { -+ -+ /* We have a charger present, get charge mode */ -+ mbcc1 = reg_read(pcf, PCF50606_REG_MBCC1); -+ chgmod = (mbcc1 & PCF50606_MBCC1_CHGMOD_MASK); -+ switch (chgmod) { -+ -+ /* TODO: How to determine POWER_SUPPLY_STATUS_FULL? */ -+ -+ case PCF50606_MBCC1_CHGMOD_QUAL: -+ case PCF50606_MBCC1_CHGMOD_PRE: -+ case PCF50606_MBCC1_CHGMOD_IDLE: -+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; -+ break; -+ -+ case PCF50606_MBCC1_CHGMOD_TRICKLE: -+ case PCF50606_MBCC1_CHGMOD_FAST_CCCV: -+ case PCF50606_MBCC1_CHGMOD_FAST_NOCC: -+ case PCF50606_MBCC1_CHGMOD_FAST_NOCV: -+ case PCF50606_MBCC1_CHGMOD_FAST_SW: -+ val->intval = POWER_SUPPLY_STATUS_CHARGING; -+ break; -+ -+ default: -+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN; -+ break; -+ -+ } -+ } -+ -+ case POWER_SUPPLY_PROP_PRESENT: -+ val->intval = 1; /* Must be, or the magic smoke comes out */ -+ break; -+ -+ case POWER_SUPPLY_PROP_ONLINE: -+ val->intval = !!(reg_read(pcf, PCF50606_REG_OOCS) & -+ PCF50606_OOCS_EXTON); -+ break; -+ -+ case POWER_SUPPLY_PROP_VOLTAGE_NOW: -+ adc = adc_read(pcf, PCF50606_ADCMUX_BATVOLT_RES, NULL); -+ /* (adc * 6000000) / 1024 == (adc * 46875) / 8 */ -+ val->intval = (adc * 46875) / 8; -+ break; -+ -+ case POWER_SUPPLY_PROP_CURRENT_NOW: -+ adc = adc_read(pcf, PCF50606_ADCMUX_BATVOLT_ADCIN1, -+ &adc_adcin1); -+ val->intval = adc_to_chg_milliamps(pcf, adc_adcin1, adc) * 1000; -+ break; -+ -+ case POWER_SUPPLY_PROP_TEMP: -+ adc = adc_read(pcf, PCF50606_ADCMUX_BATTEMP, NULL); -+ val->intval = rntc_to_temp(adc_to_rntc(pcf, adc)) * 10; -+ break; -+ -+ case POWER_SUPPLY_PROP_CAPACITY: -+ val->intval = battvolt_scale(pcf50606_battvolt(pcf)); -+ break; -+ -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ -+ return ret; -+} -+ -+/*********************************************************************** -+ * RTC -+ ***********************************************************************/ -+ -+struct pcf50606_time { -+ u_int8_t sec; -+ u_int8_t min; -+ u_int8_t hour; -+ u_int8_t wkday; -+ u_int8_t day; -+ u_int8_t month; -+ u_int8_t year; -+}; -+ -+static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50606_time *pcf) -+{ -+ rtc->tm_sec = BCD2BIN(pcf->sec); -+ rtc->tm_min = BCD2BIN(pcf->min); -+ rtc->tm_hour = BCD2BIN(pcf->hour); -+ rtc->tm_wday = BCD2BIN(pcf->wkday); -+ rtc->tm_mday = BCD2BIN(pcf->day); -+ rtc->tm_mon = BCD2BIN(pcf->month); -+ rtc->tm_year = BCD2BIN(pcf->year) + 100; -+} -+ -+static void rtc2pcf_time(struct pcf50606_time *pcf, struct rtc_time *rtc) -+{ -+ pcf->sec = BIN2BCD(rtc->tm_sec); -+ pcf->min = BIN2BCD(rtc->tm_min); -+ pcf->hour = BIN2BCD(rtc->tm_hour); -+ pcf->wkday = BIN2BCD(rtc->tm_wday); -+ pcf->day = BIN2BCD(rtc->tm_mday); -+ pcf->month = BIN2BCD(rtc->tm_mon); -+ pcf->year = BIN2BCD(rtc->tm_year - 100); -+} -+ -+static int pcf50606_rtc_ioctl(struct device *dev, unsigned int cmd, -+ unsigned long arg) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ -+ switch (cmd) { -+ case RTC_AIE_OFF: -+ /* disable the alarm interrupt */ -+ reg_set_bit_mask(pcf, PCF50606_REG_INT1M, -+ PCF50606_INT1_ALARM, PCF50606_INT1_ALARM); -+ return 0; -+ case RTC_AIE_ON: -+ /* enable the alarm interrupt */ -+ reg_clear_bits(pcf, PCF50606_REG_INT1M, PCF50606_INT1_ALARM); -+ return 0; -+ case RTC_PIE_OFF: -+ /* disable periodic interrupt (hz tick) */ -+ pcf->flags &= ~PCF50606_F_RTC_SECOND; -+ reg_set_bit_mask(pcf, PCF50606_REG_INT1M, -+ PCF50606_INT1_SECOND, PCF50606_INT1_SECOND); -+ return 0; -+ case RTC_PIE_ON: -+ /* ensable periodic interrupt (hz tick) */ -+ pcf->flags |= PCF50606_F_RTC_SECOND; -+ reg_clear_bits(pcf, PCF50606_REG_INT1M, PCF50606_INT1_SECOND); -+ return 0; -+ } -+ return -ENOIOCTLCMD; -+} -+ -+static int pcf50606_rtc_read_time(struct device *dev, struct rtc_time *tm) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ struct pcf50606_time pcf_tm; -+ -+ mutex_lock(&pcf->lock); -+ pcf_tm.sec = __reg_read(pcf, PCF50606_REG_RTCSC); -+ pcf_tm.min = __reg_read(pcf, PCF50606_REG_RTCMN); -+ pcf_tm.hour = __reg_read(pcf, PCF50606_REG_RTCHR); -+ pcf_tm.wkday = __reg_read(pcf, PCF50606_REG_RTCWD); -+ pcf_tm.day = __reg_read(pcf, PCF50606_REG_RTCDT); -+ pcf_tm.month = __reg_read(pcf, PCF50606_REG_RTCMT); -+ pcf_tm.year = __reg_read(pcf, PCF50606_REG_RTCYR); -+ mutex_unlock(&pcf->lock); -+ -+ dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n", -+ pcf_tm.day, pcf_tm.month, pcf_tm.year, -+ pcf_tm.hour, pcf_tm.min, pcf_tm.sec); -+ -+ pcf2rtc_time(tm, &pcf_tm); -+ -+ dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n", -+ tm->tm_mday, tm->tm_mon, tm->tm_year, -+ tm->tm_hour, tm->tm_min, tm->tm_sec); -+ -+ return 0; -+} -+ -+static int pcf50606_rtc_set_time(struct device *dev, struct rtc_time *tm) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ struct pcf50606_time pcf_tm; -+ u_int8_t int1m; -+ -+ dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n", -+ tm->tm_mday, tm->tm_mon, tm->tm_year, -+ tm->tm_hour, tm->tm_min, tm->tm_sec); -+ rtc2pcf_time(&pcf_tm, tm); -+ dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n", -+ pcf_tm.day, pcf_tm.month, pcf_tm.year, -+ pcf_tm.hour, pcf_tm.min, pcf_tm.sec); -+ -+ mutex_lock(&pcf->lock); -+ -+ /* disable SECOND interrupt */ -+ int1m = __reg_read(pcf, PCF50606_REG_INT1M); -+ __reg_write(pcf, PCF50606_REG_INT1M, int1m | PCF50606_INT1_SECOND); -+ -+ __reg_write(pcf, PCF50606_REG_RTCSC, pcf_tm.sec); -+ __reg_write(pcf, PCF50606_REG_RTCMN, pcf_tm.min); -+ __reg_write(pcf, PCF50606_REG_RTCHR, pcf_tm.hour); -+ __reg_write(pcf, PCF50606_REG_RTCWD, pcf_tm.wkday); -+ __reg_write(pcf, PCF50606_REG_RTCDT, pcf_tm.day); -+ __reg_write(pcf, PCF50606_REG_RTCMT, pcf_tm.month); -+ __reg_write(pcf, PCF50606_REG_RTCYR, pcf_tm.year); -+ -+ /* restore INT1M, potentially re-enable SECOND interrupt */ -+ __reg_write(pcf, PCF50606_REG_INT1M, int1m); -+ -+ mutex_unlock(&pcf->lock); -+ -+ return 0; -+} -+ -+static int pcf50606_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ struct pcf50606_time pcf_tm; -+ -+ mutex_lock(&pcf->lock); -+ alrm->enabled = -+ __reg_read(pcf, PCF50606_REG_INT1M) & PCF50606_INT1_ALARM -+ ? 0 : 1; -+ pcf_tm.sec = __reg_read(pcf, PCF50606_REG_RTCSCA); -+ pcf_tm.min = __reg_read(pcf, PCF50606_REG_RTCMNA); -+ pcf_tm.hour = __reg_read(pcf, PCF50606_REG_RTCHRA); -+ pcf_tm.wkday = __reg_read(pcf, PCF50606_REG_RTCWDA); -+ pcf_tm.day = __reg_read(pcf, PCF50606_REG_RTCDTA); -+ pcf_tm.month = __reg_read(pcf, PCF50606_REG_RTCMTA); -+ pcf_tm.year = __reg_read(pcf, PCF50606_REG_RTCYRA); -+ mutex_unlock(&pcf->lock); -+ -+ pcf2rtc_time(&alrm->time, &pcf_tm); -+ -+ return 0; -+} -+ -+static int pcf50606_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ struct pcf50606_time pcf_tm; -+ u_int8_t irqmask; -+ -+ rtc2pcf_time(&pcf_tm, &alrm->time); -+ -+ mutex_lock(&pcf->lock); -+ -+ /* disable alarm interrupt */ -+ irqmask = __reg_read(pcf, PCF50606_REG_INT1M); -+ irqmask |= PCF50606_INT1_ALARM; -+ __reg_write(pcf, PCF50606_REG_INT1M, irqmask); -+ -+ __reg_write(pcf, PCF50606_REG_RTCSCA, pcf_tm.sec); -+ __reg_write(pcf, PCF50606_REG_RTCMNA, pcf_tm.min); -+ __reg_write(pcf, PCF50606_REG_RTCHRA, pcf_tm.hour); -+ __reg_write(pcf, PCF50606_REG_RTCWDA, pcf_tm.wkday); -+ __reg_write(pcf, PCF50606_REG_RTCDTA, pcf_tm.day); -+ __reg_write(pcf, PCF50606_REG_RTCMTA, pcf_tm.month); -+ __reg_write(pcf, PCF50606_REG_RTCYRA, pcf_tm.year); -+ -+ if (alrm->enabled) { -+ /* (re-)enaable alarm interrupt */ -+ irqmask = __reg_read(pcf, PCF50606_REG_INT1M); -+ irqmask &= ~PCF50606_INT1_ALARM; -+ __reg_write(pcf, PCF50606_REG_INT1M, irqmask); -+ } -+ -+ mutex_unlock(&pcf->lock); -+ -+ /* FIXME */ -+ return 0; -+} -+ -+static struct rtc_class_ops pcf50606_rtc_ops = { -+ .ioctl = pcf50606_rtc_ioctl, -+ .read_time = pcf50606_rtc_read_time, -+ .set_time = pcf50606_rtc_set_time, -+ .read_alarm = pcf50606_rtc_read_alarm, -+ .set_alarm = pcf50606_rtc_set_alarm, -+}; -+ -+/*********************************************************************** -+ * Watchdog -+ ***********************************************************************/ -+ -+static void pcf50606_wdt_start(struct pcf50606_data *pcf) -+{ -+ reg_set_bit_mask(pcf, PCF50606_REG_OOCC1, PCF50606_OOCC1_WDTRST, -+ PCF50606_OOCC1_WDTRST); -+} -+ -+static void pcf50606_wdt_stop(struct pcf50606_data *pcf) -+{ -+ reg_clear_bits(pcf, PCF50606_REG_OOCS, PCF50606_OOCS_WDTEXP); -+} -+ -+static void pcf50606_wdt_keepalive(struct pcf50606_data *pcf) -+{ -+ pcf50606_wdt_start(pcf); -+} -+ -+static int pcf50606_wdt_open(struct inode *inode, struct file *file) -+{ -+ struct pcf50606_data *pcf = pcf50606_global; -+ -+ file->private_data = pcf; -+ -+ /* start the timer */ -+ pcf50606_wdt_start(pcf); -+ -+ return nonseekable_open(inode, file); -+} -+ -+static int pcf50606_wdt_release(struct inode *inode, struct file *file) -+{ -+ struct pcf50606_data *pcf = file->private_data; -+ -+ if (pcf->allow_close == CLOSE_STATE_ALLOW) -+ pcf50606_wdt_stop(pcf); -+ else { -+ printk(KERN_CRIT "Unexpected close, not stopping watchdog!\n"); -+ pcf50606_wdt_keepalive(pcf); -+ } -+ -+ pcf->allow_close = CLOSE_STATE_NOT; -+ -+ return 0; -+} -+ -+static ssize_t pcf50606_wdt_write(struct file *file, const char __user *data, -+ size_t len, loff_t *ppos) -+{ -+ struct pcf50606_data *pcf = file->private_data; -+ if (len) { -+ size_t i; -+ -+ for (i = 0; i != len; i++) { -+ char c; -+ if (get_user(c, data + i)) -+ return -EFAULT; -+ if (c == 'V') -+ pcf->allow_close = CLOSE_STATE_ALLOW; -+ } -+ pcf50606_wdt_keepalive(pcf); -+ } -+ -+ return len; -+} -+ -+static struct watchdog_info pcf50606_wdt_ident = { -+ .options = WDIOF_MAGICCLOSE, -+ .firmware_version = 0, -+ .identity = "PCF50606 Watchdog", -+}; -+ -+static int pcf50606_wdt_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ struct pcf50606_data *pcf = file->private_data; -+ void __user *argp = (void __user *)arg; -+ int __user *p = argp; -+ -+ switch (cmd) { -+ case WDIOC_GETSUPPORT: -+ return copy_to_user(argp, &pcf50606_wdt_ident, -+ sizeof(pcf50606_wdt_ident)) ? -EFAULT : 0; -+ break; -+ case WDIOC_GETSTATUS: -+ case WDIOC_GETBOOTSTATUS: -+ return put_user(0, p); -+ case WDIOC_KEEPALIVE: -+ pcf50606_wdt_keepalive(pcf); -+ return 0; -+ case WDIOC_GETTIMEOUT: -+ return put_user(8, p); -+ default: -+ return -ENOIOCTLCMD; -+ } -+} -+ -+static struct file_operations pcf50606_wdt_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .write = &pcf50606_wdt_write, -+ .ioctl = &pcf50606_wdt_ioctl, -+ .open = &pcf50606_wdt_open, -+ .release = &pcf50606_wdt_release, -+}; -+ -+static struct miscdevice pcf50606_wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &pcf50606_wdt_fops, -+}; -+ -+/*********************************************************************** -+ * PWM -+ ***********************************************************************/ -+ -+static const char *pwm_dc_table[] = { -+ "0/16", "1/16", "2/16", "3/16", -+ "4/16", "5/16", "6/16", "7/16", -+ "8/16", "9/16", "10/16", "11/16", -+ "12/16", "13/16", "14/16", "15/16", -+}; -+ -+static ssize_t show_pwm_dc(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ u_int8_t val; -+ -+ val = reg_read(pcf, PCF50606_REG_PWMC1) >> PCF50606_PWMC1_DC_SHIFT; -+ val &= 0xf; -+ -+ return sprintf(buf, "%s\n", pwm_dc_table[val]); -+} -+ -+static ssize_t set_pwm_dc(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ u_int8_t i; -+ -+ for (i = 0; i < ARRAY_SIZE(pwm_dc_table); i++) { -+ if (!strncmp(buf, pwm_dc_table[i], strlen(pwm_dc_table[i]))) { -+ dev_dbg(dev, "setting pwm dc %s\n\r", pwm_dc_table[i]); -+ reg_set_bit_mask(pcf, PCF50606_REG_PWMC1, 0x1e, -+ (i << PCF50606_PWMC1_DC_SHIFT)); -+ } -+ } -+ return count; -+} -+ -+static DEVICE_ATTR(pwm_dc, S_IRUGO | S_IWUSR, show_pwm_dc, set_pwm_dc); -+ -+static const char *pwm_clk_table[] = { -+ "512", "256", "128", "64", -+ "56300", "28100", "14100", "7000", -+}; -+ -+static ssize_t show_pwm_clk(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ u_int8_t val; -+ -+ val = reg_read(pcf, PCF50606_REG_PWMC1) >> PCF50606_PWMC1_CLK_SHIFT; -+ val &= 0x7; -+ -+ return sprintf(buf, "%s\n", pwm_clk_table[val]); -+} -+ -+static ssize_t set_pwm_clk(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ u_int8_t i; -+ -+ for (i = 0; i < ARRAY_SIZE(pwm_clk_table); i++) { -+ if (!strncmp(buf, pwm_clk_table[i], strlen(pwm_clk_table[i]))) { -+ dev_dbg(dev, "setting pwm clk %s\n\r", -+ pwm_clk_table[i]); -+ reg_set_bit_mask(pcf, PCF50606_REG_PWMC1, 0xe0, -+ (i << PCF50606_PWMC1_CLK_SHIFT)); -+ } -+ } -+ return count; -+} -+ -+static DEVICE_ATTR(pwm_clk, S_IRUGO | S_IWUSR, show_pwm_clk, set_pwm_clk); -+ -+static int pcf50606bl_get_intensity(struct backlight_device *bd) -+{ -+ struct pcf50606_data *pcf = bl_get_data(bd); -+ int intensity = reg_read(pcf, PCF50606_REG_PWMC1); -+ intensity = (intensity >> PCF50606_PWMC1_DC_SHIFT); -+ -+ return intensity & 0xf; -+} -+ -+static int pcf50606bl_set_intensity(struct backlight_device *bd) -+{ -+ struct pcf50606_data *pcf = bl_get_data(bd); -+ int intensity = bd->props.brightness; -+ -+ if (bd->props.power != FB_BLANK_UNBLANK) -+ intensity = 0; -+ if (bd->props.fb_blank != FB_BLANK_UNBLANK) -+ intensity = 0; -+ -+ return reg_set_bit_mask(pcf, PCF50606_REG_PWMC1, 0x1e, -+ (intensity << PCF50606_PWMC1_DC_SHIFT)); -+} -+ -+static struct backlight_ops pcf50606bl_ops = { -+ .get_brightness = pcf50606bl_get_intensity, -+ .update_status = pcf50606bl_set_intensity, -+}; -+ -+/*********************************************************************** -+ * Driver initialization -+ ***********************************************************************/ -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+/* We currently place those platform devices here to make sure the device -+ * suspend/resume order is correct */ -+static struct platform_device gta01_pm_gps_dev = { -+ .name = "neo1973-pm-gps", -+}; -+ -+static struct platform_device gta01_pm_bt_dev = { -+ .name = "neo1973-pm-bt", -+}; -+#endif -+ -+static struct attribute *pcf_sysfs_entries[16] = { -+ &dev_attr_voltage_dcd.attr, -+ &dev_attr_voltage_dcde.attr, -+ &dev_attr_voltage_dcud.attr, -+ &dev_attr_voltage_d1reg.attr, -+ &dev_attr_voltage_d2reg.attr, -+ &dev_attr_voltage_d3reg.attr, -+ &dev_attr_voltage_lpreg.attr, -+ &dev_attr_voltage_ioreg.attr, -+ NULL -+}; -+ -+static struct attribute_group pcf_attr_group = { -+ .name = NULL, /* put in device directory */ -+ .attrs = pcf_sysfs_entries, -+}; -+ -+static void populate_sysfs_group(struct pcf50606_data *pcf) -+{ -+ int i = 0; -+ struct attribute **attr; -+ -+ for (attr = pcf_sysfs_entries; *attr; attr++) -+ i++; -+ -+ if (pcf->pdata->used_features & PCF50606_FEAT_MBC) { -+ pcf_sysfs_entries[i++] = &dev_attr_chgstate.attr; -+ pcf_sysfs_entries[i++] = &dev_attr_chgmode.attr; -+ } -+ -+ if (pcf->pdata->used_features & PCF50606_FEAT_CHGCUR) -+ pcf_sysfs_entries[i++] = &dev_attr_chgcur.attr; -+ -+ if (pcf->pdata->used_features & PCF50606_FEAT_BATVOLT) -+ pcf_sysfs_entries[i++] = &dev_attr_battvolt.attr; -+ -+ if (pcf->pdata->used_features & PCF50606_FEAT_BATTEMP) -+ pcf_sysfs_entries[i++] = &dev_attr_battemp.attr; -+ -+ if (pcf->pdata->used_features & PCF50606_FEAT_PWM) { -+ pcf_sysfs_entries[i++] = &dev_attr_pwm_dc.attr; -+ pcf_sysfs_entries[i++] = &dev_attr_pwm_clk.attr; -+ } -+} -+ -+static int pcf50606_detect(struct i2c_adapter *adapter, int address, int kind) -+{ -+ struct i2c_client *new_client; -+ struct pcf50606_data *data; -+ int err = 0; -+ int irq; -+ -+ if (!pcf50606_pdev) { -+ printk(KERN_ERR "pcf50606: driver needs a platform_device!\n"); -+ return -EIO; -+ } -+ -+ irq = platform_get_irq(pcf50606_pdev, 0); -+ if (irq < 0) { -+ dev_err(&pcf50606_pdev->dev, "no irq in platform resources!\n"); -+ return -EIO; -+ } -+ -+ /* At the moment, we only support one PCF50606 in a system */ -+ if (pcf50606_global) { -+ dev_err(&pcf50606_pdev->dev, -+ "currently only one chip supported\n"); -+ return -EBUSY; -+ } -+ -+ data = kzalloc(sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ mutex_init(&data->lock); -+ mutex_init(&data->working_lock); -+ INIT_WORK(&data->work, pcf50606_work); -+ data->irq = irq; -+ data->working = 0; -+ data->suppress_onkey_events = 0; -+ data->onkey_seconds = -1; -+ data->pdata = pcf50606_pdev->dev.platform_data; -+ -+ new_client = &data->client; -+ i2c_set_clientdata(new_client, data); -+ new_client->addr = address; -+ new_client->adapter = adapter; -+ new_client->driver = &pcf50606_driver; -+ new_client->flags = 0; -+ strlcpy(new_client->name, "pcf50606", I2C_NAME_SIZE); -+ -+ /* now we try to detect the chip */ -+ -+ /* register with i2c core */ -+ err = i2c_attach_client(new_client); -+ if (err) { -+ dev_err(&new_client->dev, -+ "error during i2c_attach_client()\n"); -+ goto exit_free; -+ } -+ -+ populate_sysfs_group(data); -+ -+ err = sysfs_create_group(&new_client->dev.kobj, &pcf_attr_group); -+ if (err) { -+ dev_err(&new_client->dev, "error creating sysfs group\n"); -+ goto exit_detach; -+ } -+ -+ /* create virtual charger 'device' */ -+ -+ /* input device registration */ -+ data->input_dev = input_allocate_device(); -+ if (!data->input_dev) -+ goto exit_sysfs; -+ -+ data->input_dev->name = "FIC Neo1973 PMU events"; -+ data->input_dev->phys = "I2C"; -+ data->input_dev->id.bustype = BUS_I2C; -+ data->input_dev->cdev.dev = &new_client->dev; -+ -+ data->input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_PWR); -+ set_bit(KEY_POWER, data->input_dev->keybit); -+ set_bit(KEY_POWER2, data->input_dev->keybit); -+ set_bit(KEY_BATTERY, data->input_dev->keybit); -+ -+ err = input_register_device(data->input_dev); -+ if (err) -+ goto exit_sysfs; -+ -+ /* register power off handler with core power management */ -+ pm_power_off = &pcf50606_go_standby; -+ -+ /* configure interrupt mask */ -+ /* we don't mask SECOND here, because we want one to do coldplug with */ -+ reg_write(data, PCF50606_REG_INT1M, 0x00); -+ reg_write(data, PCF50606_REG_INT2M, 0x00); -+ reg_write(data, PCF50606_REG_INT3M, PCF50606_INT3_TSCPRES); -+ -+ err = request_irq(irq, pcf50606_irq, IRQF_TRIGGER_FALLING, -+ "pcf50606", data); -+ if (err < 0) -+ goto exit_input; -+ -+ if (enable_irq_wake(irq) < 0) -+ dev_err(&new_client->dev, "IRQ %u cannot be enabled as wake-up" -+ "source in this hardware revision!", irq); -+ -+ pcf50606_global = data; -+ -+ if (data->pdata->used_features & PCF50606_FEAT_RTC) { -+ data->rtc = rtc_device_register("pcf50606", &new_client->dev, -+ &pcf50606_rtc_ops, THIS_MODULE); -+ if (IS_ERR(data->rtc)) { -+ err = PTR_ERR(data->rtc); -+ goto exit_irq; -+ } -+ } -+ -+ if (data->pdata->used_features & PCF50606_FEAT_WDT) { -+ err = misc_register(&pcf50606_wdt_miscdev); -+ if (err) { -+ dev_err(&new_client->dev, "cannot register miscdev on " -+ "minor=%d (%d)\n", WATCHDOG_MINOR, err); -+ goto exit_rtc; -+ } -+ } -+ -+ if (data->pdata->used_features & PCF50606_FEAT_PWM) { -+ /* enable PWM controller */ -+ reg_set_bit_mask(data, PCF50606_REG_PWMC1, -+ PCF50606_PWMC1_ACTSET, -+ PCF50606_PWMC1_ACTSET); -+ } -+ -+ if (data->pdata->used_features & PCF50606_FEAT_PWM_BL) { -+ data->backlight = backlight_device_register("pcf50606-bl", -+ &new_client->dev, -+ data, -+ &pcf50606bl_ops); -+ if (!data->backlight) -+ goto exit_misc; -+ data->backlight->props.max_brightness = 16; -+ data->backlight->props.power = FB_BLANK_UNBLANK; -+ data->backlight->props.brightness = -+ data->pdata->init_brightness; -+ backlight_update_status(data->backlight); -+ } -+ -+ apm_get_power_status = pcf50606_get_power_status; -+ pmu_bat_get_property = pcf50606_bat_get_property; -+ -+#ifdef CONFIG_MACH_NEO1973_GTA01 -+ if (machine_is_neo1973_gta01()) { -+ gta01_pm_gps_dev.dev.parent = &new_client->dev; -+ switch (system_rev) { -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ gta01_pm_bt_dev.dev.parent = &new_client->dev; -+ platform_device_register(>a01_pm_bt_dev); -+ break; -+ } -+ platform_device_register(>a01_pm_gps_dev); -+ /* a link for gllin compatibility */ -+ err = sysfs_create_link(&platform_bus_type.devices.kobj, -+ >a01_pm_gps_dev.dev.kobj, "gta01-pm-gps.0"); -+ if (err) -+ printk(KERN_ERR -+ "sysfs_create_link (gta01-pm-gps.0): %d\n", err); -+ } -+#endif -+ -+ if (data->pdata->used_features & PCF50606_FEAT_ACD) -+ reg_set_bit_mask(data, PCF50606_REG_ACDC1, -+ PCF50606_ACDC1_ACDAPE, PCF50606_ACDC1_ACDAPE); -+ else -+ reg_clear_bits(data, PCF50606_REG_ACDC1, -+ PCF50606_ACDC1_ACDAPE); -+ -+ return 0; -+ -+exit_misc: -+ if (data->pdata->used_features & PCF50606_FEAT_WDT) -+ misc_deregister(&pcf50606_wdt_miscdev); -+exit_rtc: -+ if (data->pdata->used_features & PCF50606_FEAT_RTC) -+ rtc_device_unregister(pcf50606_global->rtc); -+exit_irq: -+ free_irq(pcf50606_global->irq, pcf50606_global); -+ pcf50606_global = NULL; -+exit_input: -+ pm_power_off = NULL; -+ input_unregister_device(data->input_dev); -+exit_sysfs: -+ sysfs_remove_group(&new_client->dev.kobj, &pcf_attr_group); -+exit_detach: -+ i2c_detach_client(new_client); -+exit_free: -+ kfree(data); -+ return err; -+} -+ -+static int pcf50606_attach_adapter(struct i2c_adapter *adapter) -+{ -+ return i2c_probe(adapter, &addr_data, &pcf50606_detect); -+} -+ -+static int pcf50606_detach_client(struct i2c_client *client) -+{ -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ -+ apm_get_power_status = NULL; -+ pmu_bat_get_property = NULL; -+ -+ input_unregister_device(pcf->input_dev); -+ -+ if (pcf->pdata->used_features & PCF50606_FEAT_PWM_BL) -+ backlight_device_unregister(pcf->backlight); -+ -+ if (pcf->pdata->used_features & PCF50606_FEAT_WDT) -+ misc_deregister(&pcf50606_wdt_miscdev); -+ -+ if (pcf->pdata->used_features & PCF50606_FEAT_RTC) -+ rtc_device_unregister(pcf->rtc); -+ -+ free_irq(pcf->irq, pcf); -+ -+ sysfs_remove_group(&client->dev.kobj, &pcf_attr_group); -+ -+ pm_power_off = NULL; -+ -+ kfree(pcf); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+#define INT1M_RESUMERS (PCF50606_INT1_ALARM | \ -+ PCF50606_INT1_ONKEYF | \ -+ PCF50606_INT1_EXTONR) -+#define INT2M_RESUMERS (PCF50606_INT2_CHGWD10S | \ -+ PCF50606_INT2_CHGPROT | \ -+ PCF50606_INT2_CHGERR) -+#define INT3M_RESUMERS (PCF50606_INT3_LOWBAT | \ -+ PCF50606_INT3_HIGHTMP | \ -+ PCF50606_INT3_ACDINS) -+static int pcf50606_suspend(struct device *dev, pm_message_t state) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ int i; -+ -+ /* we suspend once (!) as late as possible in the suspend sequencing */ -+ -+ if ((state.event != PM_EVENT_SUSPEND) || -+ (pcf->suspend_state != PCF50606_SS_RUNNING)) -+ return -EBUSY; -+ -+ /* The general idea is to power down all unused power supplies, -+ * and then mask all PCF50606 interrup sources but EXTONR, ONKEYF -+ * and ALARM */ -+ -+ mutex_lock(&pcf->lock); -+ -+ pcf->suspend_state = PCF50606_SS_STARTING_SUSPEND; -+ -+ /* we are not going to service any further interrupts until we -+ * resume. If the IRQ workqueue is still pending in the background, -+ * it will bail when it sees we set suspend state above. -+ */ -+ -+ disable_irq(pcf->irq); -+ -+ /* Save all registers that don't "survive" standby state */ -+ pcf->standby_regs.dcdc1 = __reg_read(pcf, PCF50606_REG_DCDC1); -+ pcf->standby_regs.dcdc2 = __reg_read(pcf, PCF50606_REG_DCDC2); -+ pcf->standby_regs.dcdec1 = __reg_read(pcf, PCF50606_REG_DCDEC1); -+ pcf->standby_regs.dcudc1 = __reg_read(pcf, PCF50606_REG_DCUDC1); -+ pcf->standby_regs.ioregc = __reg_read(pcf, PCF50606_REG_IOREGC); -+ pcf->standby_regs.d1regc1 = __reg_read(pcf, PCF50606_REG_D1REGC1); -+ pcf->standby_regs.d2regc1 = __reg_read(pcf, PCF50606_REG_D2REGC1); -+ pcf->standby_regs.d3regc1 = __reg_read(pcf, PCF50606_REG_D3REGC1); -+ pcf->standby_regs.lpregc1 = __reg_read(pcf, PCF50606_REG_LPREGC1); -+ pcf->standby_regs.adcc1 = __reg_read(pcf, PCF50606_REG_ADCC1); -+ pcf->standby_regs.adcc2 = __reg_read(pcf, PCF50606_REG_ADCC2); -+ pcf->standby_regs.pwmc1 = __reg_read(pcf, PCF50606_REG_PWMC1); -+ -+ /* switch off power supplies that are not needed during suspend */ -+ for (i = 0; i < __NUM_PCF50606_REGULATORS; i++) { -+ if (!(pcf->pdata->rails[i].flags & PMU_VRAIL_F_SUSPEND_ON)) { -+ u_int8_t tmp; -+ -+ /* IOREG powers the I@C interface so we cannot switch -+ * it off */ -+ if (i == PCF50606_REGULATOR_IOREG) -+ continue; -+ -+ dev_dbg(dev, "disabling pcf50606 regulator %u\n", i); -+ /* we cannot use pcf50606_onoff_set() because we're -+ * already under the mutex */ -+ tmp = __reg_read(pcf, regulator_registers[i]); -+ tmp &= 0x1f; -+ __reg_write(pcf, regulator_registers[i], tmp); -+ } -+ } -+ -+ pcf->standby_regs.int1m = __reg_read(pcf, PCF50606_REG_INT1M); -+ pcf->standby_regs.int2m = __reg_read(pcf, PCF50606_REG_INT2M); -+ pcf->standby_regs.int3m = __reg_read(pcf, PCF50606_REG_INT3M); -+ __reg_write(pcf, PCF50606_REG_INT1M, ~INT1M_RESUMERS & 0xff); -+ __reg_write(pcf, PCF50606_REG_INT2M, ~INT2M_RESUMERS & 0xff); -+ __reg_write(pcf, PCF50606_REG_INT3M, ~INT3M_RESUMERS & 0xff); -+ -+ pcf->suspend_state = PCF50606_SS_COMPLETED_SUSPEND; -+ -+ mutex_unlock(&pcf->lock); -+ -+ return 0; -+} -+ -+static int pcf50606_resume(struct device *dev) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50606_data *pcf = i2c_get_clientdata(client); -+ -+ mutex_lock(&pcf->lock); -+ -+ pcf->suspend_state = PCF50606_SS_STARTING_RESUME; -+ -+ /* Resume all saved registers that don't "survive" standby state */ -+ __reg_write(pcf, PCF50606_REG_INT1M, pcf->standby_regs.int1m); -+ __reg_write(pcf, PCF50606_REG_INT2M, pcf->standby_regs.int2m); -+ __reg_write(pcf, PCF50606_REG_INT3M, pcf->standby_regs.int3m); -+ -+ __reg_write(pcf, PCF50606_REG_DCDC1, pcf->standby_regs.dcdc1); -+ __reg_write(pcf, PCF50606_REG_DCDC2, pcf->standby_regs.dcdc2); -+ __reg_write(pcf, PCF50606_REG_DCDEC1, pcf->standby_regs.dcdec1); -+ __reg_write(pcf, PCF50606_REG_DCUDC1, pcf->standby_regs.dcudc1); -+ __reg_write(pcf, PCF50606_REG_IOREGC, pcf->standby_regs.ioregc); -+ __reg_write(pcf, PCF50606_REG_D1REGC1, pcf->standby_regs.d1regc1); -+ __reg_write(pcf, PCF50606_REG_D2REGC1, pcf->standby_regs.d2regc1); -+ __reg_write(pcf, PCF50606_REG_D3REGC1, pcf->standby_regs.d3regc1); -+ __reg_write(pcf, PCF50606_REG_LPREGC1, pcf->standby_regs.lpregc1); -+ __reg_write(pcf, PCF50606_REG_ADCC1, pcf->standby_regs.adcc1); -+ __reg_write(pcf, PCF50606_REG_ADCC2, pcf->standby_regs.adcc2); -+ __reg_write(pcf, PCF50606_REG_PWMC1, pcf->standby_regs.pwmc1); -+ -+ pcf->suspend_state = PCF50606_SS_COMPLETED_RESUME; -+ -+ enable_irq(pcf->irq); -+ -+ mutex_unlock(&pcf->lock); -+ -+ /* Call PCF work function; this fixes an issue on the gta01 where -+ * the power button "goes away" if it is used to wake the device. -+ */ -+ get_device(&pcf->client.dev); -+ pcf50606_work(&pcf->work); -+ -+ return 0; -+} -+#else -+#define pcf50606_suspend NULL -+#define pcf50606_resume NULL -+#endif -+ -+static struct i2c_driver pcf50606_driver = { -+ .driver = { -+ .name = "pcf50606", -+ .suspend = pcf50606_suspend, -+ .resume = pcf50606_resume, -+ }, -+ .id = I2C_DRIVERID_PCF50606, -+ .attach_adapter = pcf50606_attach_adapter, -+ .detach_client = pcf50606_detach_client, -+}; -+ -+/* platform driver, since i2c devices don't have platform_data */ -+static int __init pcf50606_plat_probe(struct platform_device *pdev) -+{ -+ struct pcf50606_platform_data *pdata = pdev->dev.platform_data; -+ -+ if (!pdata) -+ return -ENODEV; -+ -+ pcf50606_pdev = pdev; -+ -+ return 0; -+} -+ -+static int pcf50606_plat_remove(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+/* We have this purely to capture an early indication that we are coming out -+ * of suspend, before our device resume got called; async interrupt service is -+ * interested in this. -+ */ -+ -+static int pcf50606_plat_resume(struct platform_device *pdev) -+{ -+ /* i2c_get_clientdata(to_i2c_client(&pdev->dev)) returns NULL at this -+ * early resume time so we have to use pcf50606_global -+ */ -+ pcf50606_global->suspend_state = PCF50606_SS_RESUMING_BUT_NOT_US_YET; -+ -+ return 0; -+} -+ -+static struct platform_driver pcf50606_plat_driver = { -+ .probe = pcf50606_plat_probe, -+ .remove = pcf50606_plat_remove, -+ .resume_early = pcf50606_plat_resume, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "pcf50606", -+ }, -+}; -+ -+static int __init pcf50606_init(void) -+{ -+ int rc; -+ -+ rc = platform_driver_register(&pcf50606_plat_driver); -+ if (!rc) -+ rc = i2c_add_driver(&pcf50606_driver); -+ -+ return rc; -+} -+ -+static void pcf50606_exit(void) -+{ -+ i2c_del_driver(&pcf50606_driver); -+ platform_driver_unregister(&pcf50606_plat_driver); -+} -+ -+MODULE_DESCRIPTION("I2C chip driver for NXP PCF50606 power management unit"); -+MODULE_AUTHOR("Harald Welte "); -+MODULE_LICENSE("GPL"); -+ -+module_init(pcf50606_init); -+module_exit(pcf50606_exit); -Index: linux-2.6.24.7/drivers/i2c/chips/pcf50606.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/i2c/chips/pcf50606.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,302 @@ -+#ifndef _PCF50606_H -+#define _PCF50606_H -+ -+/* Philips PCF50606 Power Managemnt Unit (PMU) driver -+ * (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * -+ */ -+ -+enum pfc50606_regs { -+ PCF50606_REG_ID = 0x00, -+ PCF50606_REG_OOCS = 0x01, -+ PCF50606_REG_INT1 = 0x02, /* Interrupt Status */ -+ PCF50606_REG_INT2 = 0x03, /* Interrupt Status */ -+ PCF50606_REG_INT3 = 0x04, /* Interrupt Status */ -+ PCF50606_REG_INT1M = 0x05, /* Interrupt Mask */ -+ PCF50606_REG_INT2M = 0x06, /* Interrupt Mask */ -+ PCF50606_REG_INT3M = 0x07, /* Interrupt Mask */ -+ PCF50606_REG_OOCC1 = 0x08, -+ PCF50606_REG_OOCC2 = 0x09, -+ PCF50606_REG_RTCSC = 0x0a, /* Second */ -+ PCF50606_REG_RTCMN = 0x0b, /* Minute */ -+ PCF50606_REG_RTCHR = 0x0c, /* Hour */ -+ PCF50606_REG_RTCWD = 0x0d, /* Weekday */ -+ PCF50606_REG_RTCDT = 0x0e, /* Day */ -+ PCF50606_REG_RTCMT = 0x0f, /* Month */ -+ PCF50606_REG_RTCYR = 0x10, /* Year */ -+ PCF50606_REG_RTCSCA = 0x11, /* Alarm Second */ -+ PCF50606_REG_RTCMNA = 0x12, /* Alarm Minute */ -+ PCF50606_REG_RTCHRA = 0x13, /* Alarm Hour */ -+ PCF50606_REG_RTCWDA = 0x14, /* Alarm Weekday */ -+ PCF50606_REG_RTCDTA = 0x15, /* Alarm Day */ -+ PCF50606_REG_RTCMTA = 0x16, /* Alarm Month */ -+ PCF50606_REG_RTCYRA = 0x17, /* Alarm Year */ -+ PCF50606_REG_PSSC = 0x18, /* Power sequencing */ -+ PCF50606_REG_PWROKM = 0x19, /* PWROK mask */ -+ PCF50606_REG_PWROKS = 0x1a, /* PWROK status */ -+ PCF50606_REG_DCDC1 = 0x1b, -+ PCF50606_REG_DCDC2 = 0x1c, -+ PCF50606_REG_DCDC3 = 0x1d, -+ PCF50606_REG_DCDC4 = 0x1e, -+ PCF50606_REG_DCDEC1 = 0x1f, -+ PCF50606_REG_DCDEC2 = 0x20, -+ PCF50606_REG_DCUDC1 = 0x21, -+ PCF50606_REG_DCUDC2 = 0x22, -+ PCF50606_REG_IOREGC = 0x23, -+ PCF50606_REG_D1REGC1 = 0x24, -+ PCF50606_REG_D2REGC1 = 0x25, -+ PCF50606_REG_D3REGC1 = 0x26, -+ PCF50606_REG_LPREGC1 = 0x27, -+ PCF50606_REG_LPREGC2 = 0x28, -+ PCF50606_REG_MBCC1 = 0x29, -+ PCF50606_REG_MBCC2 = 0x2a, -+ PCF50606_REG_MBCC3 = 0x2b, -+ PCF50606_REG_MBCS1 = 0x2c, -+ PCF50606_REG_BBCC = 0x2d, -+ PCF50606_REG_ADCC1 = 0x2e, -+ PCF50606_REG_ADCC2 = 0x2f, -+ PCF50606_REG_ADCS1 = 0x30, -+ PCF50606_REG_ADCS2 = 0x31, -+ PCF50606_REG_ADCS3 = 0x32, -+ PCF50606_REG_ACDC1 = 0x33, -+ PCF50606_REG_BVMC = 0x34, -+ PCF50606_REG_PWMC1 = 0x35, -+ PCF50606_REG_LEDC1 = 0x36, -+ PCF50606_REG_LEDC2 = 0x37, -+ PCF50606_REG_GPOC1 = 0x38, -+ PCF50606_REG_GPOC2 = 0x39, -+ PCF50606_REG_GPOC3 = 0x3a, -+ PCF50606_REG_GPOC4 = 0x3b, -+ PCF50606_REG_GPOC5 = 0x3c, -+ __NUM_PCF50606_REGS -+}; -+ -+enum pcf50606_reg_oocs { -+ PFC50606_OOCS_ONKEY = 0x01, -+ PCF50606_OOCS_EXTON = 0x02, -+ PCF50606_OOCS_PWROKRST = 0x04, -+ PCF50606_OOCS_BATOK = 0x08, -+ PCF50606_OOCS_BACKOK = 0x10, -+ PCF50606_OOCS_CHGOK = 0x20, -+ PCF50606_OOCS_TEMPOK = 0x40, -+ PCF50606_OOCS_WDTEXP = 0x80, -+}; -+ -+enum pcf50606_reg_oocc1 { -+ PCF50606_OOCC1_GOSTDBY = 0x01, -+ PCF50606_OOCC1_TOTRST = 0x02, -+ PCF50606_OOCC1_CLK32ON = 0x04, -+ PCF50606_OOCC1_WDTRST = 0x08, -+ PCF50606_OOCC1_RTCWAK = 0x10, -+ PCF50606_OOCC1_CHGWAK = 0x20, -+ PCF50606_OOCC1_EXTONWAK_HIGH = 0x40, -+ PCF50606_OOCC1_EXTONWAK_LOW = 0x80, -+}; -+ -+enum pcf50606_reg_oocc2 { -+ PCF50606_OOCC2_ONKEYDB_NONE = 0x00, -+ PCF50606_OOCC2_ONKEYDB_14ms = 0x01, -+ PCF50606_OOCC2_ONKEYDB_62ms = 0x02, -+ PCF50606_OOCC2_ONKEYDB_500ms = 0x03, -+ PCF50606_OOCC2_EXTONDB_NONE = 0x00, -+ PCF50606_OOCC2_EXTONDB_14ms = 0x04, -+ PCF50606_OOCC2_EXTONDB_62ms = 0x08, -+ PCF50606_OOCC2_EXTONDB_500ms = 0x0c, -+}; -+ -+enum pcf50606_reg_int1 { -+ PCF50606_INT1_ONKEYR = 0x01, /* ONKEY rising edge */ -+ PCF50606_INT1_ONKEYF = 0x02, /* ONKEY falling edge */ -+ PCF50606_INT1_ONKEY1S = 0x04, /* OMKEY at least 1sec low */ -+ PCF50606_INT1_EXTONR = 0x08, /* EXTON rising edge */ -+ PCF50606_INT1_EXTONF = 0x10, /* EXTON falling edge */ -+ PCF50606_INT1_SECOND = 0x40, /* RTC periodic second interrupt */ -+ PCF50606_INT1_ALARM = 0x80, /* RTC alarm time is reached */ -+}; -+ -+enum pcf50606_reg_int2 { -+ PCF50606_INT2_CHGINS = 0x01, /* Charger inserted */ -+ PCF50606_INT2_CHGRM = 0x02, /* Charger removed */ -+ PCF50606_INT2_CHGFOK = 0x04, /* Fast charging OK */ -+ PCF50606_INT2_CHGERR = 0x08, /* Error in charging mode */ -+ PCF50606_INT2_CHGFRDY = 0x10, /* Fast charge completed */ -+ PCF50606_INT2_CHGPROT = 0x20, /* Charging protection interrupt */ -+ PCF50606_INT2_CHGWD10S = 0x40, /* Charger watchdig expires in 10s */ -+ PCF50606_INT2_CHGWDEXP = 0x80, /* Charger watchdog expires */ -+}; -+ -+enum pcf50606_reg_int3 { -+ PCF50606_INT3_ADCRDY = 0x01, /* ADC conversion finished */ -+ PCF50606_INT3_ACDINS = 0x02, /* Accessory inserted */ -+ PCF50606_INT3_ACDREM = 0x04, /* Accessory removed */ -+ PCF50606_INT3_TSCPRES = 0x08, /* Touch screen pressed */ -+ PCF50606_INT3_LOWBAT = 0x40, /* Low battery voltage */ -+ PCF50606_INT3_HIGHTMP = 0x80, /* High temperature */ -+}; -+ -+/* used by PSSC, PWROKM, PWROKS, */ -+enum pcf50606_regu { -+ PCF50606_REGU_DCD = 0x01, /* DCD in phase 2 */ -+ PCF50606_REGU_DCDE = 0x02, /* DCDE in phase 2 */ -+ PCF50606_REGU_DCUD = 0x04, /* DCDU in phase 2 */ -+ PCF50606_REGU_IO = 0x08, /* IO in phase 2 */ -+ PCF50606_REGU_D1 = 0x10, /* D1 in phase 2 */ -+ PCF50606_REGU_D2 = 0x20, /* D2 in phase 2 */ -+ PCF50606_REGU_D3 = 0x40, /* D3 in phase 2 */ -+ PCF50606_REGU_LP = 0x80, /* LP in phase 2 */ -+}; -+ -+enum pcf50606_reg_dcdc4 { -+ PCF50606_DCDC4_MODE_AUTO = 0x00, -+ PCF50606_DCDC4_MODE_PWM = 0x01, -+ PCF50606_DCDC4_MODE_PCF = 0x02, -+ PCF50606_DCDC4_OFF_FLOAT = 0x00, -+ PCF50606_DCDC4_OFF_BYPASS = 0x04, -+ PCF50606_DCDC4_OFF_PULLDOWN = 0x08, -+ PCF50606_DCDC4_CURLIM_500mA = 0x00, -+ PCF50606_DCDC4_CURLIM_750mA = 0x10, -+ PCF50606_DCDC4_CURLIM_1000mA = 0x20, -+ PCF50606_DCDC4_CURLIM_1250mA = 0x30, -+ PCF50606_DCDC4_TOGGLE = 0x40, -+ PCF50606_DCDC4_REGSEL_DCDC2 = 0x80, -+}; -+ -+enum pcf50606_reg_dcdec2 { -+ PCF50606_DCDEC2_MODE_AUTO = 0x00, -+ PCF50606_DCDEC2_MODE_PWM = 0x01, -+ PCF50606_DCDEC2_MODE_PCF = 0x02, -+ PCF50606_DCDEC2_OFF_FLOAT = 0x00, -+ PCF50606_DCDEC2_OFF_BYPASS = 0x04, -+}; -+ -+enum pcf50606_reg_dcudc2 { -+ PCF50606_DCUDC2_MODE_AUTO = 0x00, -+ PCF50606_DCUDC2_MODE_PWM = 0x01, -+ PCF50606_DCUDC2_MODE_PCF = 0x02, -+ PCF50606_DCUDC2_OFF_FLOAT = 0x00, -+ PCF50606_DCUDC2_OFF_BYPASS = 0x04, -+}; -+ -+enum pcf50606_reg_adcc1 { -+ PCF50606_ADCC1_TSCMODACT = 0x01, -+ PCF50606_ADCC1_TSCMODSTB = 0x02, -+ PCF50606_ADCC1_TRATSET = 0x04, -+ PCF50606_ADCC1_NTCSWAPE = 0x08, -+ PCF50606_ADCC1_NTCSWAOFF = 0x10, -+ PCF50606_ADCC1_EXTSYNCBREAK = 0x20, -+ /* reserved */ -+ PCF50606_ADCC1_TSCINT = 0x80, -+}; -+ -+enum pcf50606_reg_adcc2 { -+ PCF50606_ADCC2_ADCSTART = 0x01, -+ /* see enum pcf50606_adcc2_adcmux */ -+ PCF50606_ADCC2_SYNC_NONE = 0x00, -+ PCF50606_ADCC2_SYNC_TXON = 0x20, -+ PCF50606_ADCC2_SYNC_PWREN1 = 0x40, -+ PCF50606_ADCC2_SYNC_PWREN2 = 0x60, -+ PCF50606_ADCC2_RES_10BIT = 0x00, -+ PCF50606_ADCC2_RES_8BIT = 0x80, -+}; -+ -+#define PCF50606_ADCC2_ADCMUX_MASK (0xf << 1) -+ -+#define ADCMUX_SHIFT 1 -+enum pcf50606_adcc2_adcmux { -+ PCF50606_ADCMUX_BATVOLT_RES = 0x0 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_BATVOLT_SUBTR = 0x1 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN1_RES = 0x2 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN1_SUBTR = 0x3 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_BATTEMP = 0x4 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN2 = 0x5 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN3 = 0x6 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_ADCIN3_RATIO = 0x7 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_XPOS = 0x8 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_YPOS = 0x9 << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_P1 = 0xa << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_P2 = 0xb << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_BATVOLT_ADCIN1 = 0xc << ADCMUX_SHIFT, -+ PCF50606_ADCMUX_XY_SEQUENCE = 0xe << ADCMUX_SHIFT, -+ PCF50606_P1_P2_RESISTANCE = 0xf << ADCMUX_SHIFT, -+}; -+ -+enum pcf50606_adcs2 { -+ PCF50606_ADCS2_ADCRDY = 0x80, -+}; -+ -+enum pcf50606_reg_mbcc1 { -+ PCF50606_MBCC1_CHGAPE = 0x01, -+ PCF50606_MBCC1_AUTOFST = 0x02, -+#define PCF50606_MBCC1_CHGMOD_MASK 0x1c -+#define PCF50606_MBCC1_CHGMOD_SHIFT 2 -+ PCF50606_MBCC1_CHGMOD_QUAL = 0x00, -+ PCF50606_MBCC1_CHGMOD_PRE = 0x04, -+ PCF50606_MBCC1_CHGMOD_TRICKLE = 0x08, -+ PCF50606_MBCC1_CHGMOD_FAST_CCCV = 0x0c, -+ PCF50606_MBCC1_CHGMOD_FAST_NOCC = 0x10, -+ PCF50606_MBCC1_CHGMOD_FAST_NOCV = 0x14, -+ PCF50606_MBCC1_CHGMOD_FAST_SW = 0x18, -+ PCF50606_MBCC1_CHGMOD_IDLE = 0x1c, -+ PCF50606_MBCC1_DETMOD_LOWCHG = 0x20, -+ PCF50606_MBCC1_DETMOD_WDRST = 0x40, -+}; -+ -+enum pcf50606_reg_acdc1 { -+ PCF50606_ACDC1_ACDDET = 0x01, -+ PCF50606_ACDC1_THRSHLD_1V0 = 0x00, -+ PCF50606_ACDC1_THRSHLD_1V2 = 0x02, -+ PCF50606_ACDC1_THRSHLD_1V4 = 0x04, -+ PCF50606_ACDC1_THRSHLD_1V6 = 0x06, -+ PCF50606_ACDC1_THRSHLD_1V8 = 0x08, -+ PCF50606_ACDC1_THRSHLD_2V0 = 0x0a, -+ PCF50606_ACDC1_THRSHLD_2V2 = 0x0c, -+ PCF50606_ACDC1_THRSHLD_2V4 = 0x0e, -+ PCF50606_ACDC1_DISDB = 0x10, -+ PCF50606_ACDC1_ACDAPE = 0x80, -+}; -+ -+enum pcf50606_reg_bvmc { -+ PCF50606_BVMC_LOWBAT = 0x01, -+ PCF50606_BVMC_THRSHLD_NULL = 0x00, -+ PCF50606_BVMC_THRSHLD_2V8 = 0x02, -+ PCF50606_BVMC_THRSHLD_2V9 = 0x04, -+ PCF50606_BVMC_THRSHLD_3V = 0x08, -+ PCF50606_BVMC_THRSHLD_3V1 = 0x08, -+ PCF50606_BVMC_THRSHLD_3V2 = 0x0a, -+ PCF50606_BVMC_THRSHLD_3V3 = 0x0c, -+ PCF50606_BVMC_THRSHLD_3V4 = 0x0e, -+ PCF50606_BVMC_DISDB = 0x10, -+}; -+ -+enum pcf50606_reg_pwmc1 { -+ PCF50606_PWMC1_ACTSET = 0x01, -+ PCF50606_PWMC1_PWMDC_0_16 = 0x00, -+ PCF50606_PWMC1_PWMDC_1_16 = 0x02, -+ PCF50606_PWMC1_PWMDC_2_16 = 0x04, -+ PCF50606_PWMC1_PWMDC_3_16 = 0x06, -+ PCF50606_PWMC1_PWMDC_4_16 = 0x08, -+ PCF50606_PWMC1_PWMDC_5_16 = 0x0a, -+ PCF50606_PWMC1_PWMDC_6_16 = 0x0c, -+ PCF50606_PWMC1_PWMDC_7_16 = 0x0e, -+ PCF50606_PWMC1_PWMDC_8_16 = 0x10, -+ PCF50606_PWMC1_PWMDC_9_16 = 0x12, -+ PCF50606_PWMC1_PWMDC_10_16 = 0x14, -+ PCF50606_PWMC1_PWMDC_11_16 = 0x16, -+ PCF50606_PWMC1_PWMDC_12_16 = 0x18, -+ PCF50606_PWMC1_PWMDC_13_16 = 0x1a, -+ PCF50606_PWMC1_PWMDC_14_16 = 0x1c, -+ PCF50606_PWMC1_PWMDC_15_16 = 0x1e, -+ PCF50606_PWMC1_PRESC_512Hz = 0x20, -+ PCF50606_PWMC1_PRESC_256Hz = 0x40, -+ PCF50606_PWMC1_PRESC_64Hz = 0x60, -+ PCF50606_PWMC1_PRESC_56kHz = 0x80, -+ PCF50606_PWMC1_PRESC_28kHz = 0xa0, -+ PCF50606_PWMC1_PRESC_14kHz = 0xc0, -+ PCF50606_PWMC1_PRESC_7kHz = 0xe0, -+}; -+#define PCF50606_PWMC1_CLK_SHIFT 5 -+#define PCF50606_PWMC1_DC_SHIFT 1 -+ -+#endif /* _PCF50606_H */ -+ -Index: linux-2.6.24.7/drivers/i2c/chips/pcf50633.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/i2c/chips/pcf50633.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,2713 @@ -+/* Philips PCF50633 Power Management Unit (PMU) driver -+ * -+ * (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ * This driver is a monster ;) It provides the following features -+ * - voltage control for a dozen different voltage domains -+ * - charging control for main and backup battery -+ * - rtc / alarm -+ * - adc driver (hw_sensors like) -+ * - backlight -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include "pcf50633.h" -+#include -+ -+#if 0 -+#define DEBUGP(x, args ...) printk("%s: " x, __FUNCTION__, ## args) -+#define DEBUGPC(x, args ...) printk(x, ## args) -+#else -+#define DEBUGP(x, args ...) -+#define DEBUGPC(x, args ...) -+#endif -+ -+/*********************************************************************** -+ * Static data / structures -+ ***********************************************************************/ -+ -+static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; -+ -+I2C_CLIENT_INSMOD_1(pcf50633); -+ -+#define PCF50633_FIDX_CHG_ENABLED 0 /* Charger enabled */ -+#define PCF50633_FIDX_CHG_PRESENT 1 /* Charger present */ -+#define PCF50633_FIDX_CHG_ERR 3 /* Charger Error */ -+#define PCF50633_FIDX_CHG_PROT 4 /* Charger Protection */ -+#define PCF50633_FIDX_CHG_READY 5 /* Charging completed */ -+#define PCF50633_FIDX_PWR_PRESSED 8 -+#define PCF50633_FIDX_RTC_SECOND 9 -+#define PCF50633_FIDX_USB_PRESENT 10 -+ -+#define PCF50633_F_CHG_ENABLED (1 << PCF50633_FIDX_CHG_ENABLED) -+#define PCF50633_F_CHG_PRESENT (1 << PCF50633_FIDX_CHG_PRESENT) -+#define PCF50633_F_CHG_ERR (1 << PCF50633_FIDX_CHG_ERR) -+#define PCF50633_F_CHG_PROT (1 << PCF50633_FIDX_CHG_PROT) -+#define PCF50633_F_CHG_READY (1 << PCF50633_FIDX_CHG_READY) -+ -+#define PCF50633_F_CHG_MASK 0x000000fc -+ -+#define PCF50633_F_PWR_PRESSED (1 << PCF50633_FIDX_PWR_PRESSED) -+#define PCF50633_F_RTC_SECOND (1 << PCF50633_FIDX_RTC_SECOND) -+#define PCF50633_F_USB_PRESENT (1 << PCF50633_FIDX_USB_PRESENT) -+ -+enum close_state { -+ CLOSE_STATE_NOT, -+ CLOSE_STATE_ALLOW = 0x2342, -+}; -+ -+enum charger_type { -+ CHARGER_TYPE_NONE = 0, -+ CHARGER_TYPE_HOSTUSB, -+ CHARGER_TYPE_1A -+}; -+ -+#define ADC_NOM_CHG_DETECT_1A 6 -+#define ADC_NOM_CHG_DETECT_NONE 43 -+ -+#define MAX_ADC_FIFO_DEPTH 8 -+ -+enum pcf50633_suspend_states { -+ PCF50633_SS_RUNNING, -+ PCF50633_SS_STARTING_SUSPEND, -+ PCF50633_SS_COMPLETED_SUSPEND, -+ PCF50633_SS_RESUMING_BUT_NOT_US_YET, -+ PCF50633_SS_STARTING_RESUME, -+ PCF50633_SS_COMPLETED_RESUME, -+}; -+ -+ -+struct pcf50633_data { -+ struct i2c_client client; -+ struct pcf50633_platform_data *pdata; -+ struct backlight_device *backlight; -+ struct mutex lock; -+ unsigned int flags; -+ unsigned int working; -+ struct mutex working_lock; -+ struct work_struct work; -+ struct rtc_device *rtc; -+ struct input_dev *input_dev; -+ int allow_close; -+ int onkey_seconds; -+ int irq; -+ enum pcf50633_suspend_states suspend_state; -+ int usb_removal_count; -+ u8 pcfirq_resume[5]; -+ int probe_completed; -+ int suppress_onkey_events; -+ -+ /* if he pulls battery while charging, we notice that and correctly -+ * report that the charger is idle. But there is no interrupt that -+ * fires if he puts a battery back in and charging resumes. So when -+ * the battery is pulled, we run this work function looking for -+ * either charger resumption or USB cable pull -+ */ -+ struct mutex working_lock_nobat; -+ struct work_struct work_nobat; -+ int working_nobat; -+ int usb_removal_count_nobat; -+ int jiffies_last_bat_ins; -+ -+ /* current limit notification handler stuff */ -+ struct mutex working_lock_usb_curlimit; -+ struct work_struct work_usb_curlimit; -+ int pending_curlimit; -+ int usb_removal_count_usb_curlimit; -+ -+ int last_curlim_set; -+ -+ int coldplug_done; /* cleared by probe, set by first work service */ -+ int flag_bat_voltage_read; /* ipc to /sys batt voltage read func */ -+ -+ int charger_adc_result_raw; -+ enum charger_type charger_type; -+ -+ /* we have a FIFO of ADC measurement requests that are used only by -+ * the workqueue service code after the ADC completion interrupt -+ */ -+ int adc_queue_mux[MAX_ADC_FIFO_DEPTH]; /* which ADC input to use */ -+ int adc_queue_avg[MAX_ADC_FIFO_DEPTH]; /* amount of averaging */ -+ int adc_queue_head; /* head owned by foreground code */ -+ int adc_queue_tail; /* tail owned by service code */ -+ -+#ifdef CONFIG_PM -+ struct { -+ u_int8_t ooctim2; -+ /* enables are always [1] below -+ * I2C has limit of 32 sequential regs, so done in two lumps -+ * because it covers 33 register extent otherwise -+ */ -+ u_int8_t misc[PCF50633_REG_LEDDIM - PCF50633_REG_AUTOOUT + 1]; -+ /* skip 1 reserved reg here */ -+ u_int8_t ldo[PCF50633_REG_HCLDOENA - PCF50633_REG_LDO1OUT + 1]; -+ } standby_regs; -+ -+ struct resume_dependency resume_dependency; -+ int is_suspended; -+ -+#endif -+}; -+ -+static struct i2c_driver pcf50633_driver; -+ -+struct pcf50633_data *pcf50633_global; -+EXPORT_SYMBOL_GPL(pcf50633_global); -+ -+static struct platform_device *pcf50633_pdev; -+ -+static void pcf50633_usb_curlim_set(struct pcf50633_data *pcf, int ma); -+static void pcf50633_charge_enable(struct pcf50633_data *pcf, int on); -+ -+ -+/*********************************************************************** -+ * Low-Level routines -+ ***********************************************************************/ -+ -+static int __reg_write(struct pcf50633_data *pcf, u_int8_t reg, u_int8_t val) -+{ -+ if (pcf->suspend_state == PCF50633_SS_COMPLETED_SUSPEND) { -+ dev_err(&pcf->client.dev, "__reg_write while suspended\n"); -+ dump_stack(); -+ } -+ return i2c_smbus_write_byte_data(&pcf->client, reg, val); -+} -+ -+static int reg_write(struct pcf50633_data *pcf, u_int8_t reg, u_int8_t val) -+{ -+ int ret; -+ -+ mutex_lock(&pcf->lock); -+ ret = __reg_write(pcf, reg, val); -+ mutex_unlock(&pcf->lock); -+ -+ return ret; -+} -+ -+static int32_t __reg_read(struct pcf50633_data *pcf, u_int8_t reg) -+{ -+ int32_t ret; -+ -+ if (pcf->suspend_state == PCF50633_SS_COMPLETED_SUSPEND) { -+ dev_err(&pcf->client.dev, "__reg_read while suspended\n"); -+ dump_stack(); -+ } -+ ret = i2c_smbus_read_byte_data(&pcf->client, reg); -+ -+ return ret; -+} -+ -+static u_int8_t reg_read(struct pcf50633_data *pcf, u_int8_t reg) -+{ -+ int32_t ret; -+ -+ mutex_lock(&pcf->lock); -+ ret = __reg_read(pcf, reg); -+ mutex_unlock(&pcf->lock); -+ -+ return ret & 0xff; -+} -+ -+static int reg_set_bit_mask(struct pcf50633_data *pcf, -+ u_int8_t reg, u_int8_t mask, u_int8_t val) -+{ -+ int ret; -+ u_int8_t tmp; -+ -+ val &= mask; -+ -+ mutex_lock(&pcf->lock); -+ -+ tmp = __reg_read(pcf, reg); -+ tmp &= ~mask; -+ tmp |= val; -+ ret = __reg_write(pcf, reg, tmp); -+ -+ mutex_unlock(&pcf->lock); -+ -+ return ret; -+} -+ -+static int reg_clear_bits(struct pcf50633_data *pcf, u_int8_t reg, u_int8_t val) -+{ -+ int ret; -+ u_int8_t tmp; -+ -+ mutex_lock(&pcf->lock); -+ -+ tmp = __reg_read(pcf, reg); -+ tmp &= ~val; -+ ret = __reg_write(pcf, reg, tmp); -+ -+ mutex_unlock(&pcf->lock); -+ -+ return ret; -+} -+ -+/* asynchronously setup reading one ADC channel */ -+static void async_adc_read_setup(struct pcf50633_data *pcf, -+ int channel, int avg) -+{ -+ channel &= PCF50633_ADCC1_ADCMUX_MASK; -+ -+ /* kill ratiometric, but enable ACCSW biasing */ -+ __reg_write(pcf, PCF50633_REG_ADCC2, 0x00); -+ __reg_write(pcf, PCF50633_REG_ADCC3, 0x01); -+ -+ /* start ADC conversion of selected channel */ -+ __reg_write(pcf, PCF50633_REG_ADCC1, channel | avg | -+ PCF50633_ADCC1_ADCSTART | PCF50633_ADCC1_RES_10BIT); -+ -+} -+ -+static u_int16_t async_adc_complete(struct pcf50633_data *pcf) -+{ -+ u_int16_t ret = (__reg_read(pcf, PCF50633_REG_ADCS1) << 2) | -+ (__reg_read(pcf, PCF50633_REG_ADCS3) & -+ PCF50633_ADCS3_ADCDAT1L_MASK); -+ -+ DEBUGPC("adc result = %d\n", ret); -+ -+ return ret; -+} -+ -+ -+ -+ -+/*********************************************************************** -+ * Voltage / ADC -+ ***********************************************************************/ -+ -+static u_int8_t auto_voltage(unsigned int millivolts) -+{ -+ if (millivolts < 1800) -+ return 0; -+ if (millivolts > 3800) -+ return 0xff; -+ -+ millivolts -= 625; -+ return millivolts/25; -+} -+ -+static unsigned int auto_2voltage(u_int8_t bits) -+{ -+ if (bits < 0x2f) -+ return 0; -+ return 625 + (bits * 25); -+} -+ -+static u_int8_t down_voltage(unsigned int millivolts) -+{ -+ if (millivolts < 625) -+ return 0; -+ else if (millivolts > 3000) -+ return 0xff; -+ -+ millivolts -= 625; -+ return millivolts/25; -+} -+ -+static unsigned int down_2voltage(u_int8_t bits) -+{ -+ return 625 + (bits*25); -+} -+ -+static u_int8_t ldo_voltage(unsigned int millivolts) -+{ -+ if (millivolts < 900) -+ return 0; -+ else if (millivolts > 3600) -+ return 0x1f; -+ -+ millivolts -= 900; -+ return millivolts/100; -+} -+ -+static unsigned int ldo_2voltage(u_int8_t bits) -+{ -+ bits &= 0x1f; -+ return 900 + (bits * 100); -+} -+ -+static const u_int8_t regulator_registers[__NUM_PCF50633_REGULATORS] = { -+ [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT, -+ [PCF50633_REGULATOR_DOWN1] = PCF50633_REG_DOWN1OUT, -+ [PCF50633_REGULATOR_DOWN2] = PCF50633_REG_DOWN2OUT, -+ [PCF50633_REGULATOR_MEMLDO] = PCF50633_REG_MEMLDOOUT, -+ [PCF50633_REGULATOR_LDO1] = PCF50633_REG_LDO1OUT, -+ [PCF50633_REGULATOR_LDO2] = PCF50633_REG_LDO2OUT, -+ [PCF50633_REGULATOR_LDO3] = PCF50633_REG_LDO3OUT, -+ [PCF50633_REGULATOR_LDO4] = PCF50633_REG_LDO4OUT, -+ [PCF50633_REGULATOR_LDO5] = PCF50633_REG_LDO5OUT, -+ [PCF50633_REGULATOR_LDO6] = PCF50633_REG_LDO6OUT, -+ [PCF50633_REGULATOR_HCLDO] = PCF50633_REG_HCLDOOUT, -+}; -+ -+int pcf50633_onoff_set(struct pcf50633_data *pcf, -+ enum pcf50633_regulator_id reg, int on) -+{ -+ u_int8_t addr; -+ -+ if (reg >= __NUM_PCF50633_REGULATORS) -+ return -EINVAL; -+ -+ /* the *ENA register is always one after the *OUT register */ -+ addr = regulator_registers[reg] + 1; -+ -+ if (on == 0) -+ reg_set_bit_mask(pcf, addr, PCF50633_REGULATOR_ON, 0); -+ else -+ reg_set_bit_mask(pcf, addr, PCF50633_REGULATOR_ON, -+ PCF50633_REGULATOR_ON); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(pcf50633_onoff_set); -+ -+int pcf50633_onoff_get(struct pcf50633_data *pcf, -+ enum pcf50633_regulator_id reg) -+{ -+ u_int8_t val, addr; -+ -+ if (reg >= __NUM_PCF50633_REGULATORS) -+ return -EINVAL; -+ -+ /* the *ENA register is always one after the *OUT register */ -+ addr = regulator_registers[reg] + 1; -+ val = reg_read(pcf, addr) & PCF50633_REGULATOR_ON; -+ -+ return val; -+} -+EXPORT_SYMBOL_GPL(pcf50633_onoff_get); -+ -+int pcf50633_voltage_set(struct pcf50633_data *pcf, -+ enum pcf50633_regulator_id reg, -+ unsigned int millivolts) -+{ -+ u_int8_t volt_bits; -+ u_int8_t regnr; -+ -+ DEBUGP("pcf=%p, reg=%d, mvolts=%d\n", pcf, reg, millivolts); -+ -+ if (reg >= __NUM_PCF50633_REGULATORS) -+ return -EINVAL; -+ -+ regnr = regulator_registers[reg]; -+ -+ if (millivolts > pcf->pdata->rails[reg].voltage.max) -+ return -EINVAL; -+ -+ switch (reg) { -+ case PCF50633_REGULATOR_AUTO: -+ volt_bits = auto_voltage(millivolts); -+ break; -+ case PCF50633_REGULATOR_DOWN1: -+ volt_bits = down_voltage(millivolts); -+ break; -+ case PCF50633_REGULATOR_DOWN2: -+ volt_bits = down_voltage(millivolts); -+ break; -+ case PCF50633_REGULATOR_LDO1: -+ case PCF50633_REGULATOR_LDO2: -+ case PCF50633_REGULATOR_LDO3: -+ case PCF50633_REGULATOR_LDO4: -+ case PCF50633_REGULATOR_LDO5: -+ case PCF50633_REGULATOR_LDO6: -+ case PCF50633_REGULATOR_HCLDO: -+ volt_bits = ldo_voltage(millivolts); -+ DEBUGP("ldo_voltage(0x%x)=%u\n", millivolts, volt_bits); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return reg_write(pcf, regnr, volt_bits); -+} -+EXPORT_SYMBOL_GPL(pcf50633_voltage_set); -+ -+unsigned int pcf50633_voltage_get(struct pcf50633_data *pcf, -+ enum pcf50633_regulator_id reg) -+{ -+ u_int8_t volt_bits; -+ u_int8_t regnr; -+ unsigned int rc = 0; -+ -+ if (reg >= __NUM_PCF50633_REGULATORS) -+ return -EINVAL; -+ -+ regnr = regulator_registers[reg]; -+ volt_bits = reg_read(pcf, regnr); -+ -+ switch (reg) { -+ case PCF50633_REGULATOR_AUTO: -+ rc = auto_2voltage(volt_bits); -+ break; -+ case PCF50633_REGULATOR_DOWN1: -+ rc = down_2voltage(volt_bits); -+ break; -+ case PCF50633_REGULATOR_DOWN2: -+ rc = down_2voltage(volt_bits); -+ break; -+ case PCF50633_REGULATOR_LDO1: -+ case PCF50633_REGULATOR_LDO2: -+ case PCF50633_REGULATOR_LDO3: -+ case PCF50633_REGULATOR_LDO4: -+ case PCF50633_REGULATOR_LDO5: -+ case PCF50633_REGULATOR_LDO6: -+ case PCF50633_REGULATOR_HCLDO: -+ rc = ldo_2voltage(volt_bits); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return rc; -+} -+EXPORT_SYMBOL_GPL(pcf50633_voltage_get); -+ -+/* go into 'STANDBY' mode, i.e. power off the main CPU and peripherals */ -+void pcf50633_go_standby(void) -+{ -+ reg_set_bit_mask(pcf50633_global, PCF50633_REG_OOCSHDWN, -+ PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY); -+} -+EXPORT_SYMBOL_GPL(pcf50633_go_standby); -+ -+void pcf50633_gpio_set(struct pcf50633_data *pcf, enum pcf50633_gpio gpio, -+ int on) -+{ -+ u_int8_t reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG; -+ -+ if (on) -+ reg_set_bit_mask(pcf, reg, 0x0f, 0x07); -+ else -+ reg_set_bit_mask(pcf, reg, 0x0f, 0x00); -+} -+EXPORT_SYMBOL_GPL(pcf50633_gpio_set); -+ -+int pcf50633_gpio_get(struct pcf50633_data *pcf, enum pcf50633_gpio gpio) -+{ -+ u_int8_t reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG; -+ u_int8_t val = reg_read(pcf, reg) & 0x0f; -+ -+ if (val == PCF50633_GPOCFG_GPOSEL_1 || -+ val == (PCF50633_GPOCFG_GPOSEL_0|PCF50633_GPOCFG_GPOSEL_INVERSE)) -+ return 1; -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(pcf50633_gpio_get); -+ -+static int interpret_charger_type_from_adc(struct pcf50633_data *pcf, -+ int sample) -+{ -+ /* 1A capable charger? */ -+ -+ if (sample < ((ADC_NOM_CHG_DETECT_NONE + ADC_NOM_CHG_DETECT_1A) / 2)) -+ return CHARGER_TYPE_1A; -+ -+ /* well then, nothing in the USB hole, or USB host / unk adapter */ -+ -+ if (pcf->flags & PCF50633_F_USB_PRESENT) /* ooh power is in there */ -+ return CHARGER_TYPE_HOSTUSB; /* HOSTUSB is the catchall */ -+ -+ return CHARGER_TYPE_NONE; /* no really -- nothing in there */ -+} -+ -+ -+ -+static void configure_pmu_for_charger(struct pcf50633_data *pcf, -+ enum charger_type type) -+{ -+ switch (type) { -+ case CHARGER_TYPE_NONE: -+ pcf50633_usb_curlim_set(pcf, 0); -+ break; -+ /* -+ * the PCF50633 has a feature that it will supply only excess current -+ * from the charger that is not used to power the device. So this -+ * 500mA setting is "up to 500mA" according to that. -+ */ -+ case CHARGER_TYPE_HOSTUSB: -+ /* USB subsystem should call pcf50633_usb_curlim_set to set -+ * what was negotiated with the host when it is enumerated -+ * successfully. If we get called again after a good -+ * negotiation, we keep what was negotiated. (Removal of -+ * USB plug destroys pcf->last_curlim_set to 0) -+ */ -+ if (pcf->last_curlim_set > 100) -+ pcf50633_usb_curlim_set(pcf, pcf->last_curlim_set); -+ else -+ pcf50633_usb_curlim_set(pcf, 100); -+ break; -+ case CHARGER_TYPE_1A: -+ pcf50633_usb_curlim_set(pcf, 1000); -+ /* -+ * stop GPO / EN_HOSTUSB power driving out on the same -+ * USB power pins we have a 1A charger on right now! -+ */ -+ dev_dbg(&pcf->client.dev, "Charger -> CHARGER_TYPE_1A\n"); -+ __reg_write(pcf, PCF50633_GPO - PCF50633_GPIO1 + -+ PCF50633_REG_GPIO1CFG, -+ __reg_read(pcf, PCF50633_GPO - PCF50633_GPIO1 + -+ PCF50633_REG_GPIO1CFG) & 0xf0); -+ break; -+ } -+ -+ /* max out USB fast charge current -- actual current drawn is -+ * additionally limited by USB limit so no worries -+ */ -+ __reg_write(pcf, PCF50633_REG_MBCC5, 0xff); -+ -+} -+ -+static void trigger_next_adc_job_if_any(struct pcf50633_data *pcf) -+{ -+ if (pcf->adc_queue_head == pcf->adc_queue_tail) -+ return; -+ async_adc_read_setup(pcf, -+ pcf->adc_queue_mux[pcf->adc_queue_tail], -+ pcf->adc_queue_avg[pcf->adc_queue_tail]); -+} -+ -+static void add_request_to_adc_queue(struct pcf50633_data *pcf, -+ int mux, int avg) -+{ -+ int old_head = pcf->adc_queue_head; -+ pcf->adc_queue_mux[pcf->adc_queue_head] = mux; -+ pcf->adc_queue_avg[pcf->adc_queue_head] = avg; -+ -+ pcf->adc_queue_head = (pcf->adc_queue_head + 1) & -+ (MAX_ADC_FIFO_DEPTH - 1); -+ -+ /* it was idle before we just added this? we need to kick it then */ -+ if (old_head == pcf->adc_queue_tail) -+ trigger_next_adc_job_if_any(pcf); -+} -+ -+/* -+ * we get run to handle servicing the async notification from USB stack that -+ * we got enumerated and allowed to draw a particular amount of current -+ */ -+ -+static void pcf50633_work_usbcurlim(struct work_struct *work) -+{ -+ struct pcf50633_data *pcf = -+ container_of(work, struct pcf50633_data, work_usb_curlimit); -+ -+ mutex_lock(&pcf->working_lock_usb_curlimit); -+ -+ /* just can't cope with it if we are suspending, don't reschedule */ -+ if ((pcf->suspend_state == PCF50633_SS_STARTING_SUSPEND) || -+ (pcf->suspend_state == PCF50633_SS_COMPLETED_SUSPEND)) -+ goto bail; -+ -+ dev_dbg(&pcf->client.dev, "pcf50633_work_usbcurlim\n"); -+ -+ if (!pcf->probe_completed) -+ goto reschedule; -+ -+ /* we got a notification from USB stack before we completed resume... -+ * that can only make trouble, reschedule for a retry -+ */ -+ if (pcf->suspend_state && -+ (pcf->suspend_state < PCF50633_SS_COMPLETED_RESUME)) -+ goto reschedule; -+ -+ /* -+ * did he pull USB before we managed to set the limit? -+ */ -+ if (pcf->usb_removal_count_usb_curlimit != pcf->usb_removal_count) -+ goto bail; -+ -+ /* OK let's set the requested limit and finish */ -+ -+ dev_dbg(&pcf->client.dev, "pcf50633_work_usbcurlim setting %dmA\n", -+ pcf->pending_curlimit); -+ pcf50633_usb_curlim_set(pcf, pcf->pending_curlimit); -+ -+bail: -+ mutex_unlock(&pcf->working_lock_usb_curlimit); -+ return; -+ -+reschedule: -+ dev_dbg(&pcf->client.dev, "pcf50633_work_usbcurlim rescheduling\n"); -+ if (!schedule_work(&pcf->work_usb_curlimit)) -+ dev_err(&pcf->client.dev, "curlim reschedule work " -+ "already queued\n"); -+ -+ mutex_unlock(&pcf->working_lock_usb_curlimit); -+ /* don't spew, delaying whatever else is happening */ -+ msleep(1); -+} -+ -+ -+/* this is an export to allow machine to set USB current limit according to -+ * notifications of USB stack about enumeration state. We spawn a work -+ * function to handle the actual setting, because suspend / resume and such -+ * can be in a bad state since this gets called externally asychronous to -+ * anything else going on in pcf50633. -+ */ -+ -+int pcf50633_notify_usb_current_limit_change(struct pcf50633_data *pcf, -+ unsigned int ma) -+{ -+ /* can happen if he calls with pcf50633_global before probe -+ * have to bail with error since we can't even schedule the work -+ */ -+ if (!pcf) { -+ printk(KERN_ERR "pcf50633_notify_usb_current_limit called with NULL pcf\n"); -+ return -EBUSY; -+ } -+ -+ dev_dbg(&pcf->client.dev, -+ "pcf50633_notify_usb_current_limit_change %dmA\n", ma); -+ -+ /* prepare to detect USB power removal before we complete */ -+ pcf->usb_removal_count_usb_curlimit = pcf->usb_removal_count; -+ -+ pcf->pending_curlimit = ma; -+ -+ if (!schedule_work(&pcf->work_usb_curlimit)) -+ dev_err(&pcf->client.dev, "curlim work item already queued\n"); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(pcf50633_notify_usb_current_limit_change); -+ -+ -+/* we are run when we see a NOBAT situation, because there is no interrupt -+ * source in pcf50633 that triggers on resuming charging. It watches to see -+ * if charging resumes, it reassesses the charging source if it does. If the -+ * USB power disappears, it is also a sign there must be a battery and it is -+ * NOT being charged, so it exits since the next move must be USB insertion for -+ * change of charger state -+ */ -+ -+static void pcf50633_work_nobat(struct work_struct *work) -+{ -+ struct pcf50633_data *pcf = -+ container_of(work, struct pcf50633_data, work_nobat); -+ -+ mutex_lock(&pcf->working_lock_nobat); -+ pcf->working_nobat = 1; -+ mutex_unlock(&pcf->working_lock_nobat); -+ -+ while (1) { -+ msleep(1000); -+ -+ if (pcf->suspend_state != PCF50633_SS_RUNNING) -+ continue; -+ -+ /* there's a battery in there now? */ -+ if (reg_read(pcf, PCF50633_REG_MBCS3) & 0x40) { -+ -+ pcf->jiffies_last_bat_ins = jiffies; -+ -+ /* figure out our charging stance */ -+ add_request_to_adc_queue(pcf, PCF50633_ADCC1_MUX_ADCIN1, -+ PCF50633_ADCC1_AVERAGE_16); -+ goto bail; -+ } -+ -+ /* he pulled USB cable since we were started? exit then */ -+ if (pcf->usb_removal_count_nobat != pcf->usb_removal_count) -+ goto bail; -+ } -+ -+bail: -+ mutex_lock(&pcf->working_lock_nobat); -+ pcf->working_nobat = 0; -+ mutex_unlock(&pcf->working_lock_nobat); -+} -+ -+ -+static void pcf50633_work(struct work_struct *work) -+{ -+ struct pcf50633_data *pcf = -+ container_of(work, struct pcf50633_data, work); -+ u_int8_t pcfirq[5]; -+ int ret; -+ int tail; -+ -+ mutex_lock(&pcf->working_lock); -+ pcf->working = 1; -+ -+ /* sanity */ -+ if (!&pcf->client.dev) -+ goto bail; -+ -+ /* -+ * if we are presently suspending, we are not in a position to deal -+ * with pcf50633 interrupts at all. -+ * -+ * Because we didn't clear the int pending registers, there will be -+ * no edge / interrupt waiting for us when we wake. But it is OK -+ * because at the end of our resume, we call this workqueue function -+ * gratuitously, clearing the pending register and re-enabling -+ * servicing this interrupt. -+ */ -+ -+ if ((pcf->suspend_state == PCF50633_SS_STARTING_SUSPEND) || -+ (pcf->suspend_state == PCF50633_SS_COMPLETED_SUSPEND)) -+ goto bail; -+ -+ /* -+ * If we are inside suspend -> resume completion time we don't attempt -+ * service until we have fully resumed. Although we could talk to the -+ * device as soon as I2C is up, the regs in the device which we might -+ * choose to modify as part of the service action have not been -+ * reloaded with their pre-suspend states yet. Therefore we will -+ * defer our service if we are called like that until our resume has -+ * completed. -+ * -+ * This shouldn't happen any more because we disable servicing this -+ * interrupt in suspend and don't re-enable it until resume is -+ * completed. -+ */ -+ -+ if (pcf->suspend_state && -+ (pcf->suspend_state != PCF50633_SS_COMPLETED_RESUME)) -+ goto reschedule; -+ -+ /* this is the case early in resume! Sanity check! */ -+ if (i2c_get_clientdata(&pcf->client) == NULL) -+ goto reschedule; -+ -+ /* -+ * datasheet says we have to read the five IRQ -+ * status regs in one transaction -+ */ -+ ret = i2c_smbus_read_i2c_block_data(&pcf->client, -+ PCF50633_REG_INT1, -+ sizeof(pcfirq), -+ pcfirq); -+ if (ret != sizeof(pcfirq)) { -+ dev_dbg(&pcf->client.dev, -+ "Oh crap PMU IRQ register read failed -- " -+ "retrying later %d\n", ret); -+ /* -+ * it shouldn't fail, we no longer attempt to use -+ * I2C while it can be suspended. But we don't have -+ * much option but to retry if if it ever did fail, -+ * because if we don't service the interrupt to clear -+ * it, we will never see another PMU interrupt edge. -+ */ -+ goto reschedule; -+ } -+ -+ /* hey did we just resume? (because we don't get here unless we are -+ * running normally or the first call after resumption) -+ */ -+ -+ if (pcf->suspend_state != PCF50633_SS_RUNNING) { -+ /* -+ * grab a copy of resume interrupt reasons -+ * from pcf50633 POV -+ */ -+ memcpy(pcf->pcfirq_resume, pcfirq, sizeof(pcf->pcfirq_resume)); -+ -+ /* pcf50633 resume is really really over now then */ -+ pcf->suspend_state = PCF50633_SS_RUNNING; -+ -+ /* peek at the IRQ reason, if power button then set a flag -+ * so that we do not signal the event to userspace -+ */ -+ if (pcfirq[1] & (PCF50633_INT2_ONKEYF | PCF50633_INT2_ONKEYR)) { -+ pcf->suppress_onkey_events = 1; -+ DEBUGP("Wake by ONKEY, suppressing ONKEY event"); -+ } else { -+ pcf->suppress_onkey_events = 0; -+ } -+ } -+ -+ if (!pcf->coldplug_done) { -+ DEBUGP("PMU Coldplug init\n"); -+ -+ /* we used SECOND to kick ourselves started -- turn it off */ -+ pcfirq[0] &= ~PCF50633_INT1_SECOND; -+ reg_set_bit_mask(pcf, PCF50633_REG_INT1M, -+ PCF50633_INT1_SECOND, -+ PCF50633_INT1_SECOND); -+ -+ /* coldplug the USB if present */ -+ if ((__reg_read(pcf, PCF50633_REG_MBCS1) & -+ (PCF50633_MBCS1_USBPRES | PCF50633_MBCS1_USBOK)) == -+ (PCF50633_MBCS1_USBPRES | PCF50633_MBCS1_USBOK)) { -+ DEBUGPC("COLD USBINS\n"); -+ input_report_key(pcf->input_dev, KEY_POWER2, 1); -+ apm_queue_event(APM_POWER_STATUS_CHANGE); -+ pcf->flags |= PCF50633_F_USB_PRESENT; -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_USB_INSERT); -+ } -+ -+ /* figure out our initial charging stance */ -+ add_request_to_adc_queue(pcf, PCF50633_ADCC1_MUX_ADCIN1, -+ PCF50633_ADCC1_AVERAGE_16); -+ -+ pcf->coldplug_done = 1; -+ } -+ -+ DEBUGP("INT1=0x%02x INT2=0x%02x INT3=0x%02x INT4=0x%02x INT5=0x%02x\n", -+ pcfirq[0], pcfirq[1], pcfirq[2], pcfirq[3], pcfirq[4]); -+ -+ if (pcfirq[0] & PCF50633_INT1_ADPINS) { -+ /* Charger inserted */ -+ DEBUGPC("ADPINS "); -+ input_report_key(pcf->input_dev, KEY_BATTERY, 1); -+ apm_queue_event(APM_POWER_STATUS_CHANGE); -+ pcf->flags |= PCF50633_F_CHG_PRESENT; -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_INSERT); -+ } -+ if (pcfirq[0] & PCF50633_INT1_ADPREM) { -+ /* Charger removed */ -+ DEBUGPC("ADPREM "); -+ input_report_key(pcf->input_dev, KEY_BATTERY, 0); -+ apm_queue_event(APM_POWER_STATUS_CHANGE); -+ pcf->flags &= ~PCF50633_F_CHG_PRESENT; -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_REMOVE); -+ } -+ if (pcfirq[0] & PCF50633_INT1_USBINS) { -+ DEBUGPC("USBINS "); -+ input_report_key(pcf->input_dev, KEY_POWER2, 1); -+ apm_queue_event(APM_POWER_STATUS_CHANGE); -+ pcf->flags |= PCF50633_F_USB_PRESENT; -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_USB_INSERT); -+ msleep(500); /* debounce, allow to see any ID resistor */ -+ /* completion irq will figure out our charging stance */ -+ add_request_to_adc_queue(pcf, PCF50633_ADCC1_MUX_ADCIN1, -+ PCF50633_ADCC1_AVERAGE_16); -+ } -+ if (pcfirq[0] & PCF50633_INT1_USBREM && -+ !(pcfirq[0] & PCF50633_INT1_USBINS)) { -+ /* the occurrence of USBINS and USBREM -+ * should be exclusive in one schedule work -+ */ -+ DEBUGPC("USBREM "); -+ -+ pcf->usb_removal_count++; -+ -+ /* only deal if we had understood it was in */ -+ if (pcf->flags & PCF50633_F_USB_PRESENT) { -+ input_report_key(pcf->input_dev, KEY_POWER2, 0); -+ apm_queue_event(APM_POWER_STATUS_CHANGE); -+ pcf->flags &= ~PCF50633_F_USB_PRESENT; -+ -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_USB_REMOVE); -+ -+ /* destroy any memory of grant of power from host */ -+ pcf->last_curlim_set = 0; -+ -+ /* completion irq will figure out our charging stance */ -+ add_request_to_adc_queue(pcf, PCF50633_ADCC1_MUX_ADCIN1, -+ PCF50633_ADCC1_AVERAGE_16); -+ } -+ } -+ if (pcfirq[0] & PCF50633_INT1_ALARM) { -+ DEBUGPC("ALARM "); -+ if (pcf->pdata->used_features & PCF50633_FEAT_RTC) -+ rtc_update_irq(pcf->rtc, 1, RTC_AF | RTC_IRQF); -+ } -+ if (pcfirq[0] & PCF50633_INT1_SECOND) { -+ if (pcf->flags & PCF50633_F_RTC_SECOND) { -+ DEBUGPC("SECOND "); -+ rtc_update_irq(pcf->rtc, 1, RTC_PF | RTC_IRQF); -+ } -+ -+ if (pcf->onkey_seconds >= 0 && -+ pcf->flags & PCF50633_F_PWR_PRESSED) { -+ DEBUGP("ONKEY_SECONDS(%u, OOCSTAT=0x%02x) ", -+ pcf->onkey_seconds, -+ reg_read(pcf, PCF50633_REG_OOCSTAT)); -+ pcf->onkey_seconds++; -+ if (pcf->onkey_seconds >= -+ pcf->pdata->onkey_seconds_sig_init) { -+ /* Ask init to do 'ctrlaltdel' */ -+ /* -+ * currently Linux reacts badly to issuing a -+ * signal to PID #1 before init is started. -+ * What happens is that the next kernel thread -+ * to start, which is the JFFS2 Garbage -+ * collector in our case, gets the signal -+ * instead and proceeds to fail to fork -- -+ * which is very bad. Therefore we confirm -+ * PID #1 exists before issuing the signal -+ */ -+ if (find_task_by_pid(1)) { -+ DEBUGPC("SIGINT(init) "); -+ kill_proc(1, SIGINT, 1); -+ } -+ /* FIXME: what if userspace doesn't shut down? */ -+ } -+ if (pcf->onkey_seconds >= -+ pcf->pdata->onkey_seconds_shutdown) { -+ DEBUGPC("Power Off "); -+ pcf50633_go_standby(); -+ } -+ } -+ } -+ -+ if (pcfirq[1] & PCF50633_INT2_ONKEYF) { -+ /* ONKEY falling edge (start of button press) */ -+ pcf->flags |= PCF50633_F_PWR_PRESSED; -+ if (!pcf->suppress_onkey_events) { -+ DEBUGPC("ONKEYF "); -+ input_report_key(pcf->input_dev, KEY_POWER, 1); -+ } else { -+ DEBUGPC("ONKEYF(unreported) "); -+ } -+ } -+ if (pcfirq[1] & PCF50633_INT2_ONKEYR) { -+ /* ONKEY rising edge (end of button press) */ -+ pcf->flags &= ~PCF50633_F_PWR_PRESSED; -+ pcf->onkey_seconds = -1; -+ if (!pcf->suppress_onkey_events) { -+ DEBUGPC("ONKEYR "); -+ input_report_key(pcf->input_dev, KEY_POWER, 0); -+ } else { -+ DEBUGPC("ONKEYR(unreported) "); -+ /* don't suppress any more power button events */ -+ pcf->suppress_onkey_events = 0; -+ } -+ /* disable SECOND interrupt in case RTC didn't -+ * request it */ -+ if (!(pcf->flags & PCF50633_F_RTC_SECOND)) -+ reg_set_bit_mask(pcf, PCF50633_REG_INT1M, -+ PCF50633_INT1_SECOND, -+ PCF50633_INT1_SECOND); -+ } -+ /* FIXME: we don't use EXTON1/2/3. thats why we skip it */ -+ -+ if (pcfirq[2] & PCF50633_INT3_BATFULL) { -+ DEBUGPC("BATFULL "); -+ -+ /* the problem is, we get a false BATFULL if we inserted battery -+ * while USB powered. Defeat BATFULL if we recently inserted -+ * battery -+ */ -+ -+ if ((jiffies - pcf->jiffies_last_bat_ins) < (HZ * 2)) { -+ -+ DEBUGPC("*** Ignoring BATFULL ***\n"); -+ -+ ret = reg_read(pcf, PCF50633_REG_MBCC7) & -+ PCF56033_MBCC7_USB_MASK; -+ -+ -+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC7, -+ PCF56033_MBCC7_USB_MASK, -+ PCF50633_MBCC7_USB_SUSPEND); -+ -+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC7, -+ PCF56033_MBCC7_USB_MASK, -+ ret); -+ } else { -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_IDLE); -+ } -+ -+ /* FIXME: signal this to userspace */ -+ } -+ if (pcfirq[2] & PCF50633_INT3_CHGHALT) { -+ DEBUGPC("CHGHALT "); -+ /* -+ * this is really "battery not pulling current" -- it can -+ * appear with no battery attached -+ */ -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_CHANGE); -+ } -+ if (pcfirq[2] & PCF50633_INT3_THLIMON) { -+ DEBUGPC("THLIMON "); -+ pcf->flags |= PCF50633_F_CHG_PROT; -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_CHANGE); -+ } -+ if (pcfirq[2] & PCF50633_INT3_THLIMOFF) { -+ DEBUGPC("THLIMOFF "); -+ pcf->flags &= ~PCF50633_F_CHG_PROT; -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_CHANGE); -+ } -+ if (pcfirq[2] & PCF50633_INT3_USBLIMON) { -+ DEBUGPC("USBLIMON "); -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_CHANGE); -+ } -+ if (pcfirq[2] & PCF50633_INT3_USBLIMOFF) { -+ DEBUGPC("USBLIMOFF "); -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_CHANGE); -+ } -+ if (pcfirq[2] & PCF50633_INT3_ADCRDY) { -+ /* ADC result ready */ -+ DEBUGPC("ADCRDY "); -+ tail = pcf->adc_queue_tail; -+ pcf->adc_queue_tail = (pcf->adc_queue_tail + 1) & -+ (MAX_ADC_FIFO_DEPTH - 1); -+ -+ switch (pcf->adc_queue_mux[tail]) { -+ case PCF50633_ADCC1_MUX_BATSNS_RES: /* battery voltage */ -+ pcf->flag_bat_voltage_read = async_adc_complete(pcf); -+ break; -+ case PCF50633_ADCC1_MUX_ADCIN1: /* charger type */ -+ pcf->charger_adc_result_raw = async_adc_complete(pcf); -+ pcf->charger_type = interpret_charger_type_from_adc( -+ pcf, pcf->charger_adc_result_raw); -+ configure_pmu_for_charger(pcf, pcf->charger_type); -+ break; -+ default: -+ async_adc_complete(pcf); -+ break; -+ } -+ trigger_next_adc_job_if_any(pcf); -+ } -+ if (pcfirq[2] & PCF50633_INT3_ONKEY1S) { -+ /* ONKEY pressed for more than 1 second */ -+ pcf->onkey_seconds = 0; -+ DEBUGPC("ONKEY1S "); -+ /* Tell PMU we are taking care of this */ -+ reg_set_bit_mask(pcf, PCF50633_REG_OOCSHDWN, -+ PCF50633_OOCSHDWN_TOTRST, -+ PCF50633_OOCSHDWN_TOTRST); -+ /* enable SECOND interrupt (hz tick) */ -+ reg_clear_bits(pcf, PCF50633_REG_INT1M, PCF50633_INT1_SECOND); -+ } -+ -+ if (pcfirq[3] & (PCF50633_INT4_LOWBAT|PCF50633_INT4_LOWSYS)) { -+ if ((__reg_read(pcf, PCF50633_REG_MBCS1) & -+ (PCF50633_MBCS1_USBPRES | PCF50633_MBCS1_USBOK)) == -+ (PCF50633_MBCS1_USBPRES | PCF50633_MBCS1_USBOK)) { -+ /* -+ * hey no need to freak out, we have some kind of -+ * valid charger power to keep us going -- but note that -+ * we are not actually charging anything -+ */ -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_IDLE); -+ -+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, -+ PCF50633_MBCC1_RESUME, -+ PCF50633_MBCC1_RESUME); -+ -+ /* -+ * Well, we are not charging anything right this second -+ * ... however in the next ~30s before we get the next -+ * NOBAT, he might insert a battery. So we schedule a -+ * work function checking to see if -+ * we started charging something during that time. -+ * USB removal as well as charging terminates the work -+ * function so we can't get terminally confused -+ */ -+ mutex_lock(&pcf->working_lock_nobat); -+ if (!pcf->working_nobat) { -+ pcf->usb_removal_count_nobat = -+ pcf->usb_removal_count; -+ -+ if (!schedule_work(&pcf->work_nobat)) -+ DEBUGPC("failed to schedule nobat\n"); -+ } -+ mutex_unlock(&pcf->working_lock_nobat); -+ -+ -+ DEBUGPC("(NO)BAT "); -+ } else { -+ /* Really low battery voltage, we have 8 seconds left */ -+ DEBUGPC("LOWBAT "); -+ /* -+ * currently Linux reacts badly to issuing a signal to -+ * PID #1 before init is started. What happens is that -+ * the next kernel thread to start, which is the JFFS2 -+ * Garbage collector in our case, gets the signal -+ * instead and proceeds to fail to fork -- which is -+ * very bad. Therefore we confirm PID #1 exists -+ * before issuing SPIGPWR -+ */ -+ if (find_task_by_pid(1)) { -+ apm_queue_event(APM_LOW_BATTERY); -+ DEBUGPC("SIGPWR(init) "); -+ kill_proc(1, SIGPWR, 1); -+ } else -+ /* -+ * well, our situation is like this: we do not -+ * have any external power, we have a low -+ * battery and since PID #1 doesn't exist yet, -+ * we are early in the boot, likely before -+ * rootfs mount. We should just call it a day -+ */ -+ apm_queue_event(APM_CRITICAL_SUSPEND); -+ } -+ -+ /* Tell PMU we are taking care of this */ -+ reg_set_bit_mask(pcf, PCF50633_REG_OOCSHDWN, -+ PCF50633_OOCSHDWN_TOTRST, -+ PCF50633_OOCSHDWN_TOTRST); -+ } -+ if (pcfirq[3] & PCF50633_INT4_HIGHTMP) { -+ /* High temperature */ -+ DEBUGPC("HIGHTMP "); -+ apm_queue_event(APM_CRITICAL_SUSPEND); -+ } -+ if (pcfirq[3] & PCF50633_INT4_AUTOPWRFAIL) { -+ DEBUGPC("PCF50633_INT4_AUTOPWRFAIL "); -+ /* FIXME: deal with this */ -+ } -+ if (pcfirq[3] & PCF50633_INT4_DWN1PWRFAIL) { -+ DEBUGPC("PCF50633_INT4_DWN1PWRFAIL "); -+ /* FIXME: deal with this */ -+ } -+ if (pcfirq[3] & PCF50633_INT4_DWN2PWRFAIL) { -+ DEBUGPC("PCF50633_INT4_DWN2PWRFAIL "); -+ /* FIXME: deal with this */ -+ } -+ if (pcfirq[3] & PCF50633_INT4_LEDPWRFAIL) { -+ DEBUGPC("PCF50633_INT4_LEDPWRFAIL "); -+ /* FIXME: deal with this */ -+ } -+ if (pcfirq[3] & PCF50633_INT4_LEDOVP) { -+ DEBUGPC("PCF50633_INT4_LEDOVP "); -+ /* FIXME: deal with this */ -+ } -+ -+ DEBUGPC("\n"); -+ -+bail: -+ pcf->working = 0; -+ input_sync(pcf->input_dev); -+ put_device(&pcf->client.dev); -+ mutex_unlock(&pcf->working_lock); -+ -+ return; -+ -+reschedule: -+ /* don't spew, delaying whatever else is happening */ -+ /* EXCEPTION: if we are in the middle of suspending, we don't have -+ * time to hang around since we may be turned off core 1V3 already -+ */ -+ if ((pcf->suspend_state != PCF50633_SS_STARTING_SUSPEND) && -+ (pcf->suspend_state != PCF50633_SS_COMPLETED_SUSPEND)) { -+ msleep(10); -+ dev_dbg(&pcf->client.dev, "rescheduling interrupt service\n"); -+ } -+ if (!schedule_work(&pcf->work)) -+ dev_err(&pcf->client.dev, "int service reschedule failed\n"); -+ -+ /* we don't put the device here, hold it for next time */ -+ mutex_unlock(&pcf->working_lock); -+} -+ -+static irqreturn_t pcf50633_irq(int irq, void *_pcf) -+{ -+ struct pcf50633_data *pcf = _pcf; -+ -+ DEBUGP("entering(irq=%u, pcf=%p): scheduling work\n", irq, _pcf); -+ dev_dbg(&pcf->client.dev, "pcf50633_irq scheduling work\n"); -+ -+ get_device(&pcf->client.dev); -+ if (!schedule_work(&pcf->work) && !pcf->working) -+ dev_err(&pcf->client.dev, "pcf irq work already queued\n"); -+ -+ return IRQ_HANDLED; -+} -+ -+static u_int16_t adc_to_batt_millivolts(u_int16_t adc) -+{ -+ u_int16_t mvolts; -+ -+ mvolts = (adc * 6000) / 1024; -+ -+ return mvolts; -+} -+ -+#define BATTVOLT_SCALE_START 2800 -+#define BATTVOLT_SCALE_END 4200 -+#define BATTVOLT_SCALE_DIVIDER ((BATTVOLT_SCALE_END - BATTVOLT_SCALE_START)/100) -+ -+static u_int8_t battvolt_scale(u_int16_t battvolt) -+{ -+ /* FIXME: this linear scale is completely bogus */ -+ u_int16_t battvolt_relative = battvolt - BATTVOLT_SCALE_START; -+ unsigned int percent = battvolt_relative / BATTVOLT_SCALE_DIVIDER; -+ -+ return percent; -+} -+ -+u_int16_t pcf50633_battvolt(struct pcf50633_data *pcf) -+{ -+ int count = 10; -+ -+ pcf->flag_bat_voltage_read = -1; -+ add_request_to_adc_queue(pcf, PCF50633_ADCC1_MUX_BATSNS_RES, -+ PCF50633_ADCC1_AVERAGE_16); -+ -+ while ((count--) && (pcf->flag_bat_voltage_read < 0)) -+ msleep(1); -+ -+ if (count < 0) { /* timeout somehow */ -+ DEBUGPC("pcf50633_battvolt timeout :-(\n"); -+ return -1; -+ } -+ -+ return adc_to_batt_millivolts(pcf->flag_bat_voltage_read); -+} -+EXPORT_SYMBOL_GPL(pcf50633_battvolt); -+ -+static ssize_t show_battvolt(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ -+ return sprintf(buf, "%u\n", pcf50633_battvolt(pcf)); -+} -+static DEVICE_ATTR(battvolt, S_IRUGO | S_IWUSR, show_battvolt, NULL); -+ -+static int reg_id_by_name(const char *name) -+{ -+ int reg_id; -+ -+ if (!strcmp(name, "voltage_auto")) -+ reg_id = PCF50633_REGULATOR_AUTO; -+ else if (!strcmp(name, "voltage_down1")) -+ reg_id = PCF50633_REGULATOR_DOWN1; -+ else if (!strcmp(name, "voltage_down2")) -+ reg_id = PCF50633_REGULATOR_DOWN2; -+ else if (!strcmp(name, "voltage_memldo")) -+ reg_id = PCF50633_REGULATOR_MEMLDO; -+ else if (!strcmp(name, "voltage_ldo1")) -+ reg_id = PCF50633_REGULATOR_LDO1; -+ else if (!strcmp(name, "voltage_ldo2")) -+ reg_id = PCF50633_REGULATOR_LDO2; -+ else if (!strcmp(name, "voltage_ldo3")) -+ reg_id = PCF50633_REGULATOR_LDO3; -+ else if (!strcmp(name, "voltage_ldo4")) -+ reg_id = PCF50633_REGULATOR_LDO4; -+ else if (!strcmp(name, "voltage_ldo5")) -+ reg_id = PCF50633_REGULATOR_LDO5; -+ else if (!strcmp(name, "voltage_ldo6")) -+ reg_id = PCF50633_REGULATOR_LDO6; -+ else if (!strcmp(name, "voltage_hcldo")) -+ reg_id = PCF50633_REGULATOR_HCLDO; -+ else -+ reg_id = -1; -+ -+ return reg_id; -+} -+ -+static ssize_t show_vreg(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ unsigned int reg_id; -+ -+ reg_id = reg_id_by_name(attr->attr.name); -+ if (reg_id < 0) -+ return 0; -+ -+ if (pcf50633_onoff_get(pcf, reg_id) > 0) -+ return sprintf(buf, "%u\n", pcf50633_voltage_get(pcf, reg_id)); -+ else -+ return strlcpy(buf, "0\n", PAGE_SIZE); -+} -+ -+static ssize_t set_vreg(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ unsigned long mvolts = simple_strtoul(buf, NULL, 10); -+ unsigned int reg_id; -+ -+ reg_id = reg_id_by_name(attr->attr.name); -+ if (reg_id < 0) -+ return -EIO; -+ -+ DEBUGP("attempting to set %s(%d) to %lu mvolts\n", attr->attr.name, -+ reg_id, mvolts); -+ -+ if (mvolts == 0) { -+ pcf50633_onoff_set(pcf, reg_id, 0); -+ } else { -+ if (pcf50633_voltage_set(pcf, reg_id, mvolts) < 0) { -+ dev_warn(dev, "refusing to set %s(%d) to %lu mvolts " -+ "(max=%u)\n", attr->attr.name, reg_id, mvolts, -+ pcf->pdata->rails[reg_id].voltage.max); -+ return -EINVAL; -+ } -+ pcf50633_onoff_set(pcf, reg_id, 1); -+ } -+ -+ return count; -+} -+ -+static DEVICE_ATTR(voltage_auto, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_down1, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_down2, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_memldo, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_ldo1, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_ldo2, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_ldo3, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_ldo4, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_ldo5, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_ldo6, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+static DEVICE_ATTR(voltage_hcldo, S_IRUGO | S_IWUSR, show_vreg, set_vreg); -+ -+/*********************************************************************** -+ * Charger Control -+ ***********************************************************************/ -+ -+/* Set maximum USB current limit */ -+static void pcf50633_usb_curlim_set(struct pcf50633_data *pcf, int ma) -+{ -+ u_int8_t bits; -+ int active = 0; -+ -+ pcf->last_curlim_set = ma; -+ -+ dev_dbg(&pcf->client.dev, "setting usb current limit to %d ma", ma); -+ -+ if (ma >= 1000) { -+ bits = PCF50633_MBCC7_USB_1000mA; -+ } -+ else if (ma >= 500) -+ bits = PCF50633_MBCC7_USB_500mA; -+ else if (ma >= 100) -+ bits = PCF50633_MBCC7_USB_100mA; -+ else -+ bits = PCF50633_MBCC7_USB_SUSPEND; -+ -+ /* set the nearest charging limit */ -+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC7, PCF56033_MBCC7_USB_MASK, -+ bits); -+ -+ /* with this charging limit, is charging actually meaningful? */ -+ switch (bits) { -+ case PCF50633_MBCC7_USB_500mA: -+ case PCF50633_MBCC7_USB_1000mA: -+ /* yes with this charging limit, we can do real charging */ -+ active = 1; -+ break; -+ default: -+ /* no charging is gonna be happening */ -+ break; -+ } -+ /* -+ * enable or disable charging according to current limit -- this will -+ * also throw a platform notification callback about it -+ */ -+ pcf50633_charge_enable(pcf50633_global, active); -+ -+ /* clear batfull */ -+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, -+ PCF50633_MBCC1_AUTORES, -+ 0); -+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, -+ PCF50633_MBCC1_RESUME, -+ PCF50633_MBCC1_RESUME); -+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, -+ PCF50633_MBCC1_AUTORES, -+ PCF50633_MBCC1_AUTORES); -+ -+} -+ -+static ssize_t show_usblim(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ u_int8_t usblim = reg_read(pcf, PCF50633_REG_MBCC7) & -+ PCF56033_MBCC7_USB_MASK; -+ unsigned int ma; -+ -+ if (usblim == PCF50633_MBCC7_USB_1000mA) -+ ma = 1000; -+ else if (usblim == PCF50633_MBCC7_USB_500mA) -+ ma = 500; -+ else if (usblim == PCF50633_MBCC7_USB_100mA) -+ ma = 100; -+ else -+ ma = 0; -+ -+ return sprintf(buf, "%u\n", ma); -+} -+static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, NULL); -+ -+/* Enable/disable charging */ -+static void pcf50633_charge_enable(struct pcf50633_data *pcf, int on) -+{ -+ u_int8_t bits; -+ u_int8_t usblim; -+ -+ if (!(pcf->pdata->used_features & PCF50633_FEAT_MBC)) -+ return; -+ -+ DEBUGPC("pcf50633_charge_enable %d\n", on); -+ -+ if (on) { -+ pcf->flags |= PCF50633_F_CHG_ENABLED; -+ bits = PCF50633_MBCC1_CHGENA; -+ usblim = reg_read(pcf, PCF50633_REG_MBCC7) & -+ PCF56033_MBCC7_USB_MASK; -+ switch (usblim) { -+ case PCF50633_MBCC7_USB_1000mA: -+ case PCF50633_MBCC7_USB_500mA: -+ if (pcf->flags & PCF50633_F_USB_PRESENT) -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, -+ PMU_EVT_CHARGER_ACTIVE); -+ break; -+ default: -+ break; -+ } -+ } else { -+ pcf->flags &= ~PCF50633_F_CHG_ENABLED; -+ bits = 0; -+ if (pcf->pdata->cb) -+ pcf->pdata->cb(&pcf->client.dev, -+ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_IDLE); -+ } -+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, PCF50633_MBCC1_CHGENA, -+ bits); -+} -+ -+#if 0 -+#define ONE 1000000 -+static u_int16_t adc_to_rntc(struct pcf50633_data *pcf, u_int16_t adc) -+{ -+ u_int32_t r_batt = (adc * pcf->pdata->r_fix_batt) / (1023 - adc); -+ u_int16_t r_ntc; -+ -+ /* The battery NTC has a parallell 10kOhms resistor */ -+ r_ntc = ONE / ((ONE/r_batt) - (ONE/pcf->pdata->r_fix_batt_par)); -+ -+ return r_ntc; -+} -+#endif -+static ssize_t show_battemp(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ return sprintf(buf, "\n"); -+} -+static DEVICE_ATTR(battemp, S_IRUGO | S_IWUSR, show_battemp, NULL); -+#if 0 -+static u_int16_t adc_to_chg_milliamps(struct pcf50633_data *pcf, -+ u_int16_t adc_adcin1, -+ u_int16_t adc_batvolt) -+{ -+ u_int32_t res = ((adc_adcin1 - adc_batvolt) * 6000); -+ return res / (pcf->pdata->r_sense_milli * 1024 / 1000); -+} -+#endif -+static ssize_t show_chgcur(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ return sprintf(buf, "\n"); -+} -+static DEVICE_ATTR(chgcur, S_IRUGO | S_IWUSR, show_chgcur, NULL); -+ -+static const char *chgmode_names[] = { -+ [PCF50633_MBCS2_MBC_PLAY] = "play-only", -+ [PCF50633_MBCS2_MBC_USB_PRE] = "pre", -+ [PCF50633_MBCS2_MBC_ADP_PRE] = "pre", -+ [PCF50633_MBCS2_MBC_USB_PRE_WAIT] = "pre-wait", -+ [PCF50633_MBCS2_MBC_ADP_PRE_WAIT] = "pre-wait", -+ [PCF50633_MBCS2_MBC_USB_FAST] = "fast", -+ [PCF50633_MBCS2_MBC_ADP_FAST] = "fast", -+ [PCF50633_MBCS2_MBC_USB_FAST_WAIT] = "fast-wait", -+ [PCF50633_MBCS2_MBC_ADP_FAST_WAIT] = "fast-wait", -+ [PCF50633_MBCS2_MBC_ADP_FAST_WAIT] = "bat-full", -+}; -+ -+static ssize_t show_chgmode(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ u_int8_t mbcs2 = reg_read(pcf, PCF50633_REG_MBCS2); -+ u_int8_t chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK); -+ -+ return sprintf(buf, "%s\n", chgmode_names[chgmod]); -+} -+ -+static ssize_t set_chgmode(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ -+ /* As opposed to the PCF50606, we can only enable or disable -+ * charging and not directly jump into a certain mode! */ -+ -+ if (!strcmp(buf, "0\n")) -+ pcf50633_charge_enable(pcf, 0); -+ else -+ pcf50633_charge_enable(pcf, 1); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(chgmode, S_IRUGO | S_IWUSR, show_chgmode, set_chgmode); -+ -+static const char *chgstate_names[] = { -+ [PCF50633_FIDX_CHG_ENABLED] = "enabled", -+ [PCF50633_FIDX_CHG_PRESENT] = "charger_present", -+ [PCF50633_FIDX_USB_PRESENT] = "usb_present", -+ [PCF50633_FIDX_CHG_ERR] = "error", -+ [PCF50633_FIDX_CHG_PROT] = "protection", -+ [PCF50633_FIDX_CHG_READY] = "ready", -+}; -+ -+static ssize_t show_chgstate(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ -+ char *b = buf; -+ int i; -+ -+ for (i = 0; i < 32; i++) -+ if (pcf->flags & (1 << i) && i < ARRAY_SIZE(chgstate_names)) -+ b += sprintf(b, "%s ", chgstate_names[i]); -+ -+ if (b > buf) -+ b += sprintf(b, "\n"); -+ -+ return b - buf; -+} -+static DEVICE_ATTR(chgstate, S_IRUGO | S_IWUSR, show_chgstate, NULL); -+ -+/*********************************************************************** -+ * APM emulation -+ ***********************************************************************/ -+ -+extern void (*apm_get_power_status)(struct apm_power_info *); -+ -+static void pcf50633_get_power_status(struct apm_power_info *info) -+{ -+ struct pcf50633_data *pcf = pcf50633_global; -+ u_int8_t chgmod = reg_read(pcf, PCF50633_REG_MBCS2) & -+ PCF50633_MBCS2_MBC_MASK; -+ -+ u_int16_t battvolt = pcf50633_battvolt(pcf); -+ -+ if (reg_read(pcf, PCF50633_REG_MBCS1) & -+ (PCF50633_MBCS1_USBPRES|PCF50633_MBCS1_ADAPTPRES)) -+ info->ac_line_status = APM_AC_ONLINE; -+ else -+ info->ac_line_status = APM_AC_OFFLINE; -+ -+ switch (chgmod) { -+ case PCF50633_MBCS2_MBC_PLAY: -+ case PCF50633_MBCS2_MBC_USB_PRE: -+ case PCF50633_MBCS2_MBC_USB_PRE_WAIT: -+ case PCF50633_MBCS2_MBC_USB_FAST_WAIT: -+ case PCF50633_MBCS2_MBC_ADP_PRE: -+ case PCF50633_MBCS2_MBC_ADP_PRE_WAIT: -+ case PCF50633_MBCS2_MBC_ADP_FAST_WAIT: -+ case PCF50633_MBCS2_MBC_BAT_FULL: -+ case PCF50633_MBCS2_MBC_HALT: -+ info->battery_life = battvolt_scale(battvolt); -+ break; -+ case PCF50633_MBCS2_MBC_USB_FAST: -+ case PCF50633_MBCS2_MBC_ADP_FAST: -+ info->battery_status = APM_BATTERY_STATUS_CHARGING; -+ info->battery_flag = APM_BATTERY_FLAG_CHARGING; -+ default: -+ break; -+ } -+} -+ -+/*********************************************************************** -+ * RTC -+ ***********************************************************************/ -+enum pcf50633_time_indexes { -+ PCF50633_TI_SEC = 0, -+ PCF50633_TI_MIN, -+ PCF50633_TI_HOUR, -+ PCF50633_TI_WKDAY, -+ PCF50633_TI_DAY, -+ PCF50633_TI_MONTH, -+ PCF50633_TI_YEAR, -+ PCF50633_TI_EXTENT /* always last */ -+}; -+ -+ -+struct pcf50633_time { -+ u_int8_t time[PCF50633_TI_EXTENT]; -+}; -+ -+static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50633_time *pcf) -+{ -+ rtc->tm_sec = BCD2BIN(pcf->time[PCF50633_TI_SEC]); -+ rtc->tm_min = BCD2BIN(pcf->time[PCF50633_TI_MIN]); -+ rtc->tm_hour = BCD2BIN(pcf->time[PCF50633_TI_HOUR]); -+ rtc->tm_wday = BCD2BIN(pcf->time[PCF50633_TI_WKDAY]); -+ rtc->tm_mday = BCD2BIN(pcf->time[PCF50633_TI_DAY]); -+ rtc->tm_mon = BCD2BIN(pcf->time[PCF50633_TI_MONTH]); -+ rtc->tm_year = BCD2BIN(pcf->time[PCF50633_TI_YEAR]) + 100; -+} -+ -+static void rtc2pcf_time(struct pcf50633_time *pcf, struct rtc_time *rtc) -+{ -+ pcf->time[PCF50633_TI_SEC] = BIN2BCD(rtc->tm_sec); -+ pcf->time[PCF50633_TI_MIN] = BIN2BCD(rtc->tm_min); -+ pcf->time[PCF50633_TI_HOUR] = BIN2BCD(rtc->tm_hour); -+ pcf->time[PCF50633_TI_WKDAY] = BIN2BCD(rtc->tm_wday); -+ pcf->time[PCF50633_TI_DAY] = BIN2BCD(rtc->tm_mday); -+ pcf->time[PCF50633_TI_MONTH] = BIN2BCD(rtc->tm_mon); -+ pcf->time[PCF50633_TI_YEAR] = BIN2BCD(rtc->tm_year - 100); -+} -+ -+static int pcf50633_rtc_ioctl(struct device *dev, unsigned int cmd, -+ unsigned long arg) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ -+ switch (cmd) { -+ case RTC_AIE_OFF: -+ /* disable the alarm interrupt */ -+ reg_set_bit_mask(pcf, PCF50633_REG_INT1M, -+ PCF50633_INT1_ALARM, PCF50633_INT1_ALARM); -+ return 0; -+ case RTC_AIE_ON: -+ /* enable the alarm interrupt */ -+ reg_clear_bits(pcf, PCF50633_REG_INT1M, PCF50633_INT1_ALARM); -+ return 0; -+ case RTC_PIE_OFF: -+ /* disable periodic interrupt (hz tick) */ -+ pcf->flags &= ~PCF50633_F_RTC_SECOND; -+ reg_set_bit_mask(pcf, PCF50633_REG_INT1M, -+ PCF50633_INT1_SECOND, PCF50633_INT1_SECOND); -+ return 0; -+ case RTC_PIE_ON: -+ /* ensable periodic interrupt (hz tick) */ -+ pcf->flags |= PCF50633_F_RTC_SECOND; -+ reg_clear_bits(pcf, PCF50633_REG_INT1M, PCF50633_INT1_SECOND); -+ return 0; -+ } -+ return -ENOIOCTLCMD; -+} -+ -+static int pcf50633_rtc_read_time(struct device *dev, struct rtc_time *tm) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ struct pcf50633_time pcf_tm; -+ int ret; -+ -+ mutex_lock(&pcf->lock); -+ -+ ret = i2c_smbus_read_i2c_block_data(&pcf->client, -+ PCF50633_REG_RTCSC, -+ PCF50633_TI_EXTENT, -+ &pcf_tm.time[0]); -+ if (ret != PCF50633_TI_EXTENT) -+ dev_err(dev, "Failed to read time :-(\n"); -+ -+ mutex_unlock(&pcf->lock); -+ -+ dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n", -+ pcf_tm.time[PCF50633_TI_DAY], -+ pcf_tm.time[PCF50633_TI_MONTH], -+ pcf_tm.time[PCF50633_TI_YEAR], -+ pcf_tm.time[PCF50633_TI_HOUR], -+ pcf_tm.time[PCF50633_TI_MIN], -+ pcf_tm.time[PCF50633_TI_SEC]); -+ -+ pcf2rtc_time(tm, &pcf_tm); -+ -+ dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n", -+ tm->tm_mday, tm->tm_mon, tm->tm_year, -+ tm->tm_hour, tm->tm_min, tm->tm_sec); -+ -+ return 0; -+} -+ -+static int pcf50633_rtc_set_time(struct device *dev, struct rtc_time *tm) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ struct pcf50633_time pcf_tm; -+ int ret; -+ -+ dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n", -+ tm->tm_mday, tm->tm_mon, tm->tm_year, -+ tm->tm_hour, tm->tm_min, tm->tm_sec); -+ rtc2pcf_time(&pcf_tm, tm); -+ dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n", -+ pcf_tm.time[PCF50633_TI_DAY], -+ pcf_tm.time[PCF50633_TI_MONTH], -+ pcf_tm.time[PCF50633_TI_YEAR], -+ pcf_tm.time[PCF50633_TI_HOUR], -+ pcf_tm.time[PCF50633_TI_MIN], -+ pcf_tm.time[PCF50633_TI_SEC]); -+ -+ mutex_lock(&pcf->lock); -+ /* FIXME: disable second interrupt */ -+ -+ ret = i2c_smbus_write_i2c_block_data(&pcf->client, -+ PCF50633_REG_RTCSC, -+ PCF50633_TI_EXTENT, -+ &pcf_tm.time[0]); -+ if (ret) -+ dev_err(dev, "Failed to set time %d\n", ret); -+ -+ /* FIXME: re-enable second interrupt */ -+ mutex_unlock(&pcf->lock); -+ -+ return 0; -+} -+ -+static int pcf50633_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ struct pcf50633_time pcf_tm; -+ int ret; -+ -+ mutex_lock(&pcf->lock); -+ -+ alrm->enabled = -+ __reg_read(pcf, PCF50633_REG_INT1M) & PCF50633_INT1_ALARM ? 0 : 1; -+ -+ ret = i2c_smbus_read_i2c_block_data(&pcf->client, -+ PCF50633_REG_RTCSCA, -+ PCF50633_TI_EXTENT, -+ &pcf_tm.time[0]); -+ if (ret != PCF50633_TI_EXTENT) -+ dev_err(dev, "Failed to read Alarm time :-(\n"); -+ -+ mutex_unlock(&pcf->lock); -+ -+ pcf2rtc_time(&alrm->time, &pcf_tm); -+ -+ return 0; -+} -+ -+static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ struct pcf50633_time pcf_tm; -+ u_int8_t irqmask; -+ int ret; -+ -+ rtc2pcf_time(&pcf_tm, &alrm->time); -+ -+ mutex_lock(&pcf->lock); -+ -+ /* disable alarm interrupt */ -+ irqmask = __reg_read(pcf, PCF50633_REG_INT1M); -+ irqmask |= PCF50633_INT1_ALARM; -+ __reg_write(pcf, PCF50633_REG_INT1M, irqmask); -+ -+ ret = i2c_smbus_write_i2c_block_data(&pcf->client, -+ PCF50633_REG_RTCSCA, -+ PCF50633_TI_EXTENT, -+ &pcf_tm.time[0]); -+ if (ret) -+ dev_err(dev, "Failed to write alarm time :-( %d\n", ret); -+ -+ if (alrm->enabled) { -+ /* (re-)enaable alarm interrupt */ -+ irqmask = __reg_read(pcf, PCF50633_REG_INT1M); -+ irqmask &= ~PCF50633_INT1_ALARM; -+ __reg_write(pcf, PCF50633_REG_INT1M, irqmask); -+ } -+ -+ mutex_unlock(&pcf->lock); -+ -+ /* FIXME */ -+ return 0; -+} -+ -+static struct rtc_class_ops pcf50633_rtc_ops = { -+ .ioctl = pcf50633_rtc_ioctl, -+ .read_time = pcf50633_rtc_read_time, -+ .set_time = pcf50633_rtc_set_time, -+ .read_alarm = pcf50633_rtc_read_alarm, -+ .set_alarm = pcf50633_rtc_set_alarm, -+}; -+ -+/*********************************************************************** -+ * Backlight device -+ ***********************************************************************/ -+ -+static int pcf50633bl_get_intensity(struct backlight_device *bd) -+{ -+ struct pcf50633_data *pcf = bl_get_data(bd); -+ int intensity = reg_read(pcf, PCF50633_REG_LEDOUT); -+ -+ if (!(reg_read(pcf, PCF50633_REG_LEDENA) & 1)) -+ intensity = 0; -+ -+ return intensity & 0x3f; -+} -+ -+static int __pcf50633bl_set_intensity(struct pcf50633_data *pcf, int intensity) -+{ -+ int old_intensity = reg_read(pcf, PCF50633_REG_LEDOUT); -+ int ret; -+ -+ if (!(reg_read(pcf, PCF50633_REG_LEDENA) & 1)) -+ old_intensity = 0; -+ -+ /* -+ * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60) -+ * if seen, you have to re-enable the LED unit -+ * we treat intensity 0 as disable -+ */ -+ -+ if (intensity && !old_intensity) { -+ ret = reg_set_bit_mask(pcf, PCF50633_REG_LEDENA, 0x01, 0x00); -+ if (ret) -+ return ret; -+ } -+ -+ if (!intensity) /* illegal to set LEDOUT to 0 */ -+ ret = reg_set_bit_mask(pcf, PCF50633_REG_LEDENA, 0x01, 0x00); -+ else { -+ ret = reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, -+ intensity); -+ if (ret) -+ return ret; -+ ret = reg_set_bit_mask(pcf, PCF50633_REG_LEDENA, 0x01, 0x01); -+ } -+ -+ return ret; -+} -+ -+static int pcf50633bl_set_intensity(struct backlight_device *bd) -+{ -+ struct pcf50633_data *pcf = bl_get_data(bd); -+ int intensity = bd->props.brightness; -+ -+ if ((bd->props.power != FB_BLANK_UNBLANK) || -+ (bd->props.fb_blank != FB_BLANK_UNBLANK)) -+ intensity = 0; -+ -+ return __pcf50633bl_set_intensity(pcf, intensity); -+} -+ -+static struct backlight_ops pcf50633bl_ops = { -+ .get_brightness = pcf50633bl_get_intensity, -+ .update_status = pcf50633bl_set_intensity, -+}; -+ -+/* -+ * Charger type -+ */ -+ -+static ssize_t show_charger_type(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ static const char *names_charger_type[] = { -+ [CHARGER_TYPE_NONE] = "none", -+ [CHARGER_TYPE_HOSTUSB] = "host/500mA usb", -+ [CHARGER_TYPE_1A] = "charger 1A", -+ }; -+ static const char *names_charger_modes[] = { -+ [PCF50633_MBCC7_USB_1000mA] = "1A", -+ [PCF50633_MBCC7_USB_500mA] = "500mA", -+ [PCF50633_MBCC7_USB_100mA] = "100mA", -+ [PCF50633_MBCC7_USB_SUSPEND] = "suspend", -+ }; -+ int mode = reg_read(pcf, PCF50633_REG_MBCC7) & PCF56033_MBCC7_USB_MASK; -+ -+ return sprintf(buf, "%s mode %s\n", -+ names_charger_type[pcf->charger_type], -+ names_charger_modes[mode]); -+} -+ -+static DEVICE_ATTR(charger_type, 0444, show_charger_type, NULL); -+ -+static ssize_t force_usb_limit_dangerous(struct device *dev, -+ struct device_attribute *attr, const char *buf, size_t count) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ int ma = simple_strtoul(buf, NULL, 10); -+ -+ pcf50633_usb_curlim_set(pcf, ma); -+ return count; -+} -+ -+static DEVICE_ATTR(force_usb_limit_dangerous, 0600, -+ NULL, force_usb_limit_dangerous); -+ -+/* -+ * Charger adc -+ */ -+ -+static ssize_t show_charger_adc(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ -+ return sprintf(buf, "%d\n", pcf->charger_adc_result_raw); -+} -+ -+static DEVICE_ATTR(charger_adc, 0444, show_charger_adc, NULL); -+ -+/* -+ * Dump regs -+ */ -+ -+static ssize_t show_dump_regs(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ u8 dump[16]; -+ int n, n1, idx = 0; -+ char *buf1 = buf; -+ static u8 address_no_read[] = { /* must be ascending */ -+ PCF50633_REG_INT1, -+ PCF50633_REG_INT2, -+ PCF50633_REG_INT3, -+ PCF50633_REG_INT4, -+ PCF50633_REG_INT5, -+ 0 /* terminator */ -+ }; -+ -+ for (n = 0; n < 256; n += sizeof(dump)) { -+ -+ for (n1 = 0; n1 < sizeof(dump); n1++) -+ if (n == address_no_read[idx]) { -+ idx++; -+ dump[n1] = 0x00; -+ } else -+ dump[n1] = reg_read(pcf, n + n1); -+ -+ hex_dump_to_buffer(dump, sizeof(dump), 16, 1, buf1, 128, 0); -+ buf1 += strlen(buf1); -+ *buf1++ = '\n'; -+ *buf1 = '\0'; -+ } -+ -+ return buf1 - buf; -+} -+ -+static DEVICE_ATTR(dump_regs, 0400, show_dump_regs, NULL); -+ -+ -+/*********************************************************************** -+ * Driver initialization -+ ***********************************************************************/ -+ -+/* -+ * CARE! This table is modified at runtime! -+ */ -+static struct attribute *pcf_sysfs_entries[] = { -+ &dev_attr_voltage_auto.attr, -+ &dev_attr_voltage_down1.attr, -+ &dev_attr_voltage_down2.attr, -+ &dev_attr_voltage_memldo.attr, -+ &dev_attr_voltage_ldo1.attr, -+ &dev_attr_voltage_ldo2.attr, -+ &dev_attr_voltage_ldo3.attr, -+ &dev_attr_voltage_ldo4.attr, -+ &dev_attr_voltage_ldo5.attr, -+ &dev_attr_voltage_ldo6.attr, -+ &dev_attr_voltage_hcldo.attr, -+ &dev_attr_charger_type.attr, -+ &dev_attr_force_usb_limit_dangerous.attr, -+ &dev_attr_charger_adc.attr, -+ &dev_attr_dump_regs.attr, -+ NULL, /* going to add things at this point! */ -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+}; -+ -+static struct attribute_group pcf_attr_group = { -+ .name = NULL, /* put in device directory */ -+ .attrs = pcf_sysfs_entries, -+}; -+ -+static void populate_sysfs_group(struct pcf50633_data *pcf) -+{ -+ int i = 0; -+ struct attribute **attr; -+ -+ for (attr = pcf_sysfs_entries; *attr; attr++) -+ i++; -+ -+ if (pcf->pdata->used_features & PCF50633_FEAT_MBC) { -+ pcf_sysfs_entries[i++] = &dev_attr_chgstate.attr; -+ pcf_sysfs_entries[i++] = &dev_attr_chgmode.attr; -+ pcf_sysfs_entries[i++] = &dev_attr_usb_curlim.attr; -+ } -+ -+ if (pcf->pdata->used_features & PCF50633_FEAT_CHGCUR) -+ pcf_sysfs_entries[i++] = &dev_attr_chgcur.attr; -+ -+ if (pcf->pdata->used_features & PCF50633_FEAT_BATVOLT) -+ pcf_sysfs_entries[i++] = &dev_attr_battvolt.attr; -+ -+ if (pcf->pdata->used_features & PCF50633_FEAT_BATTEMP) -+ pcf_sysfs_entries[i++] = &dev_attr_battemp.attr; -+ -+} -+ -+static int pcf50633_detect(struct i2c_adapter *adapter, int address, int kind) -+{ -+ struct i2c_client *new_client; -+ struct pcf50633_data *pcf; -+ int err = 0; -+ int irq; -+ -+ DEBUGP("entering\n"); -+ if (!pcf50633_pdev) { -+ printk(KERN_ERR "pcf50633: driver needs a platform_device!\n"); -+ return -EIO; -+ } -+ -+ irq = platform_get_irq(pcf50633_pdev, 0); -+ if (irq < 0) { -+ dev_err(&pcf50633_pdev->dev, "no irq in platform resources!\n"); -+ return -EIO; -+ } -+ -+ /* At the moment, we only support one PCF50633 in a system */ -+ if (pcf50633_global) { -+ dev_err(&pcf50633_pdev->dev, -+ "currently only one chip supported\n"); -+ return -EBUSY; -+ } -+ -+ pcf = kzalloc(sizeof(*pcf), GFP_KERNEL); -+ if (!pcf) -+ return -ENOMEM; -+ -+ mutex_init(&pcf->lock); -+ mutex_init(&pcf->working_lock); -+ mutex_init(&pcf->working_lock_nobat); -+ mutex_init(&pcf->working_lock_usb_curlimit); -+ INIT_WORK(&pcf->work, pcf50633_work); -+ INIT_WORK(&pcf->work_nobat, pcf50633_work_nobat); -+ INIT_WORK(&pcf->work_usb_curlimit, pcf50633_work_usbcurlim); -+ pcf->irq = irq; -+ pcf->working = 0; -+ pcf->suppress_onkey_events = 0; -+ pcf->onkey_seconds = -1; -+ pcf->pdata = pcf50633_pdev->dev.platform_data; -+ -+ new_client = &pcf->client; -+ i2c_set_clientdata(new_client, pcf); -+ new_client->addr = address; -+ new_client->adapter = adapter; -+ new_client->driver = &pcf50633_driver; -+ new_client->flags = 0; -+ strlcpy(new_client->name, "pcf50633", I2C_NAME_SIZE); -+ -+ /* now we try to detect the chip */ -+ -+ /* register with i2c core */ -+ if ((err = i2c_attach_client(new_client))) { -+ dev_err(&new_client->dev, -+ "error during i2c_attach_client()\n"); -+ goto exit_free; -+ } -+ -+ init_resume_dependency_list(&pcf->resume_dependency); -+ -+ populate_sysfs_group(pcf); -+ -+ err = sysfs_create_group(&new_client->dev.kobj, &pcf_attr_group); -+ if (err) { -+ dev_err(&new_client->dev, "error creating sysfs group\n"); -+ goto exit_detach; -+ } -+ -+ /* create virtual charger 'device' */ -+ -+ /* register power off handler with core power management */ -+ pm_power_off = &pcf50633_go_standby; -+ -+ pcf->input_dev = input_allocate_device(); -+ if (!pcf->input_dev) -+ goto exit_sysfs; -+ -+ pcf->input_dev->name = "GTA02 PMU events"; -+ pcf->input_dev->phys = "FIXME"; -+ pcf->input_dev->id.bustype = BUS_I2C; -+ pcf->input_dev->cdev.dev = &new_client->dev; -+ -+ pcf->input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_PWR); -+ set_bit(KEY_POWER, pcf->input_dev->keybit); -+ set_bit(KEY_POWER2, pcf->input_dev->keybit); -+ set_bit(KEY_BATTERY, pcf->input_dev->keybit); -+ -+ err = input_register_device(pcf->input_dev); -+ if (err) -+ goto exit_sysfs; -+ -+ /* configure interrupt mask */ -+ /* we want SECOND to kick for the coldplug initialisation */ -+ reg_write(pcf, PCF50633_REG_INT1M, 0x00); -+ reg_write(pcf, PCF50633_REG_INT2M, 0x00); -+ reg_write(pcf, PCF50633_REG_INT3M, 0x00); -+ reg_write(pcf, PCF50633_REG_INT4M, 0x00); -+ reg_write(pcf, PCF50633_REG_INT5M, 0x00); -+ -+ err = request_irq(irq, pcf50633_irq, IRQF_TRIGGER_FALLING, -+ "pcf50633", pcf); -+ if (err < 0) -+ goto exit_input; -+ -+ if (enable_irq_wake(irq) < 0) -+ dev_err(&new_client->dev, "IRQ %u cannot be enabled as wake-up" -+ "source in this hardware revision!", irq); -+ -+ if (pcf->pdata->used_features & PCF50633_FEAT_RTC) { -+ pcf->rtc = rtc_device_register("pcf50633", &new_client->dev, -+ &pcf50633_rtc_ops, THIS_MODULE); -+ if (IS_ERR(pcf->rtc)) { -+ err = PTR_ERR(pcf->rtc); -+ goto exit_irq; -+ } -+ } -+ -+ if (pcf->pdata->used_features & PCF50633_FEAT_PWM_BL) { -+ pcf->backlight = backlight_device_register("pcf50633-bl", -+ &new_client->dev, -+ pcf, -+ &pcf50633bl_ops); -+ if (!pcf->backlight) -+ goto exit_rtc; -+ /* FIXME: are we sure we want default == off? */ -+ pcf->backlight->props.max_brightness = 0x3f; -+ pcf->backlight->props.power = FB_BLANK_UNBLANK; -+ pcf->backlight->props.fb_blank = FB_BLANK_UNBLANK; -+ pcf->backlight->props.brightness = -+ pcf->backlight->props.max_brightness; -+ backlight_update_status(pcf->backlight); -+ } -+ -+ if (pcf->pdata->flag_use_apm_emulation) -+ apm_get_power_status = pcf50633_get_power_status; -+ -+ pcf->probe_completed = 1; -+ pcf50633_global = pcf; -+ dev_info(&new_client->dev, "probe completed\n"); -+ -+ /* if platform was interested, give him a chance to register -+ * platform devices that switch power with us as the parent -+ * at registration time -- ensures suspend / resume ordering -+ */ -+ if (pcf->pdata->attach_child_devices) -+ (pcf->pdata->attach_child_devices)(&new_client->dev); -+ -+ return 0; -+exit_rtc: -+ if (pcf->pdata->used_features & PCF50633_FEAT_RTC) -+ rtc_device_unregister(pcf50633_global->rtc); -+exit_irq: -+ free_irq(pcf50633_global->irq, pcf50633_global); -+exit_input: -+ input_unregister_device(pcf->input_dev); -+exit_sysfs: -+ pm_power_off = NULL; -+ sysfs_remove_group(&new_client->dev.kobj, &pcf_attr_group); -+exit_detach: -+ i2c_detach_client(new_client); -+exit_free: -+ kfree(pcf); -+ pcf50633_global = NULL; -+ return err; -+} -+ -+static int pcf50633_attach_adapter(struct i2c_adapter *adapter) -+{ -+ DEBUGP("entering, calling i2c_probe\n"); -+ return i2c_probe(adapter, &addr_data, &pcf50633_detect); -+} -+ -+static int pcf50633_detach_client(struct i2c_client *client) -+{ -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ -+ DEBUGP("entering\n"); -+ -+ apm_get_power_status = NULL; -+ -+ free_irq(pcf->irq, pcf); -+ -+ input_unregister_device(pcf->input_dev); -+ -+ if (pcf->pdata->used_features & PCF50633_FEAT_PWM_BL) -+ backlight_device_unregister(pcf->backlight); -+ -+ if (pcf->pdata->used_features & PCF50633_FEAT_RTC) -+ rtc_device_unregister(pcf->rtc); -+ -+ sysfs_remove_group(&client->dev.kobj, &pcf_attr_group); -+ -+ pm_power_off = NULL; -+ -+ kfree(pcf); -+ -+ return 0; -+} -+ -+/* you're going to need >300 bytes in buf */ -+ -+int pcf50633_report_resumers(struct pcf50633_data *pcf, char *buf) -+{ -+ static char *int_names[] = { -+ "adpins", -+ "adprem", -+ "usbins", -+ "usbrem", -+ NULL, -+ NULL, -+ "rtcalarm", -+ "second", -+ -+ "onkeyr", -+ "onkeyf", -+ "exton1r", -+ "exton1f", -+ "exton2r", -+ "exton2f", -+ "exton3r", -+ "exton3f", -+ -+ "batfull", -+ "chghalt", -+ "thlimon", -+ "thlimoff", -+ "usblimon", -+ "usblimoff", -+ "adcrdy", -+ "onkey1s", -+ -+ "lowsys", -+ "lowbat", -+ "hightmp", -+ "autopwrfail", -+ "dwn1pwrfail", -+ "dwn2pwrfail", -+ "ledpwrfail", -+ "ledovp", -+ -+ "ldo1pwrfail", -+ "ldo2pwrfail", -+ "ldo3pwrfail", -+ "ldo4pwrfail", -+ "ldo5pwrfail", -+ "ldo6pwrfail", -+ "hcidopwrfail", -+ "hcidoovl" -+ }; -+ char *end = buf; -+ int n; -+ -+ for (n = 0; n < ARRAY_SIZE(int_names); n++) -+ if (int_names[n]) { -+ if (pcf->pcfirq_resume[n >> 3] & (1 >> (n & 7))) -+ end += sprintf(end, " * %s\n", int_names[n]); -+ else -+ end += sprintf(end, " %s\n", int_names[n]); -+ } -+ -+ return end - buf; -+} -+ -+ -+#ifdef CONFIG_PM -+ -+/* -+ * we need to export this because pcf50633_data is kept opaque -+ */ -+ -+void pcf50633_register_resume_dependency(struct pcf50633_data *pcf, -+ struct resume_dependency *dep) -+{ -+ register_resume_dependency(&pcf->resume_dependency, dep); -+ if (pcf->is_suspended) -+ activate_all_resume_dependencies(&pcf->resume_dependency); -+} -+EXPORT_SYMBOL_GPL(pcf50633_register_resume_dependency); -+ -+ -+static int pcf50633_suspend(struct device *dev, pm_message_t state) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ int i; -+ int ret; -+ u_int8_t tmp; -+ u_int8_t res[5]; -+ -+ dev_err(dev, "pcf50633_suspend\n"); -+ -+ /* we suspend once (!) as late as possible in the suspend sequencing */ -+ -+ if ((state.event != PM_EVENT_SUSPEND) || -+ (pcf->suspend_state != PCF50633_SS_RUNNING)) -+ return -EBUSY; -+ -+ /* The general idea is to power down all unused power supplies, -+ * and then mask all PCF50633 interrupt sources but EXTONR, ONKEYF -+ * and ALARM */ -+ -+ mutex_lock(&pcf->lock); -+ -+ pcf->suspend_state = PCF50633_SS_STARTING_SUSPEND; -+ -+ /* we are not going to service any further interrupts until we -+ * resume. If the IRQ workqueue is still pending in the background, -+ * it will bail when it sees we set suspend state above -+ */ -+ -+ disable_irq(pcf->irq); -+ -+ /* Save all registers that don't "survive" standby state */ -+ pcf->standby_regs.ooctim2 = __reg_read(pcf, PCF50633_REG_OOCTIM2); -+ -+ ret = i2c_smbus_read_i2c_block_data(&pcf->client, -+ PCF50633_REG_AUTOOUT, -+ sizeof(pcf->standby_regs.misc), -+ &pcf->standby_regs.misc[0]); -+ if (ret != sizeof(pcf->standby_regs.misc)) -+ dev_err(dev, "Failed to save misc levels and enables :-(\n"); -+ -+ /* regulator voltages and enable states */ -+ ret = i2c_smbus_read_i2c_block_data(&pcf->client, -+ PCF50633_REG_LDO1OUT, -+ sizeof(pcf->standby_regs.ldo), -+ &pcf->standby_regs.ldo[0]); -+ if (ret != sizeof(pcf->standby_regs.ldo)) -+ dev_err(dev, "Failed to save LDO levels and enables :-(\n"); -+ -+ /* switch off power supplies that are not needed during suspend */ -+ for (i = 0; i < __NUM_PCF50633_REGULATORS; i++) { -+ if ((pcf->pdata->rails[i].flags & PMU_VRAIL_F_SUSPEND_ON)) -+ continue; -+ -+ /* we can save ourselves the read part of a read-modify-write -+ * here because we captured all these already -+ */ -+ if (i < 4) -+ tmp = pcf->standby_regs.misc[i * 4 + 1]; -+ else -+ tmp = pcf->standby_regs.ldo[(i - 4) * 2 + 1]; -+ -+ dev_dbg(dev, "disabling reg %s by setting ENA %d to 0x%02X\n", -+ pcf->pdata->rails[i].name, -+ regulator_registers[i] + 1, tmp & 0xfe); -+ -+ /* associated enable is always +1 from OUT reg */ -+ __reg_write(pcf, regulator_registers[i] + 1, tmp & 0xfe); -+ } -+ -+ /* turn off the backlight */ -+ __reg_write(pcf, PCF50633_REG_LEDDIM, 0); -+ __reg_write(pcf, PCF50633_REG_LEDOUT, 2); -+ __reg_write(pcf, PCF50633_REG_LEDENA, 0x00); -+ -+ /* set interrupt masks so only those sources we want to wake -+ * us are able to -+ */ -+ for (i = 0; i < 5; i++) -+ res[i] = ~pcf->pdata->resumers[i]; -+ -+ ret = i2c_smbus_write_i2c_block_data(&pcf->client, -+ PCF50633_REG_INT1M, -+ 5, &res[0]); -+ if (ret) -+ dev_err(dev, "Failed to set wake masks :-( %d\n", ret); -+ -+ pcf->suspend_state = PCF50633_SS_COMPLETED_SUSPEND; -+ -+ mutex_unlock(&pcf->lock); -+ -+ pcf->is_suspended = 1; -+ activate_all_resume_dependencies(&pcf->resume_dependency); -+ return 0; -+} -+ -+ -+int pcf50633_ready(struct pcf50633_data *pcf) -+{ -+ if (!pcf) -+ return -EACCES; -+ -+ /* this was seen during boot with Qi, mmc_rescan racing us */ -+ if (!pcf->probe_completed) -+ return -EACCES; -+ -+ if ((pcf->suspend_state != PCF50633_SS_RUNNING) && -+ (pcf->suspend_state < PCF50633_SS_COMPLETED_RESUME)) -+ return -EBUSY; -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(pcf50633_ready); -+ -+int pcf50633_wait_for_ready(struct pcf50633_data *pcf, int timeout_ms, -+ char *name) -+{ -+ /* so we always go once */ -+ timeout_ms += 5; -+ -+ while ((timeout_ms >= 5) && (pcf50633_ready(pcf))) { -+ timeout_ms -= 5; /* well, it isn't very accurate, but OK */ -+ msleep(5); -+ } -+ -+ if (timeout_ms < 5) { -+ printk(KERN_ERR"pcf50633_wait_for_ready: " -+ "%s BAILING on timeout\n", name); -+ return -EBUSY; -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(pcf50633_wait_for_ready); -+ -+/* -+ * if backlight resume is selected to be deferred by platform, then it -+ * can call this to finally reset backlight status (after LCM is resumed -+ * for example -+ */ -+ -+void pcf50633_backlight_resume(struct pcf50633_data *pcf) -+{ -+ dev_dbg(&pcf->client.dev, "pcf50633_backlight_resume\n"); -+ -+ /* platform defines resume ramp speed */ -+ reg_write(pcf, PCF50633_REG_LEDDIM, -+ pcf->pdata->resume_backlight_ramp_speed); -+ -+ __pcf50633bl_set_intensity(pcf, pcf->backlight->props.brightness); -+} -+EXPORT_SYMBOL_GPL(pcf50633_backlight_resume); -+ -+ -+static int pcf50633_resume(struct device *dev) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct pcf50633_data *pcf = i2c_get_clientdata(client); -+ int ret; -+ u8 res[5]; -+ u8 misc[PCF50633_REG_LEDDIM - PCF50633_REG_AUTOOUT + 1]; -+ -+ dev_dbg(dev, "pcf50633_resume suspended on entry = %d\n", -+ (int)pcf->suspend_state); -+ mutex_lock(&pcf->lock); -+ -+ pcf->suspend_state = PCF50633_SS_STARTING_RESUME; -+ -+ /* these guys get reset while pcf50633 is suspend state, refresh */ -+ -+ __reg_write(pcf, PCF50633_REG_OOCTIM2, pcf->standby_regs.ooctim2); -+ -+ memcpy(misc, pcf->standby_regs.misc, sizeof(pcf->standby_regs.misc)); -+ -+ if (pcf->pdata->defer_resume_backlight) { -+ misc[PCF50633_REG_LEDOUT - PCF50633_REG_AUTOOUT] = 1; -+ misc[PCF50633_REG_LEDENA - PCF50633_REG_AUTOOUT] = 0x20; -+ misc[PCF50633_REG_LEDCTL - PCF50633_REG_AUTOOUT] = 1; -+ misc[PCF50633_REG_LEDDIM - PCF50633_REG_AUTOOUT] = 1; -+ } -+ -+ /* regulator voltages and enable states */ -+ ret = i2c_smbus_write_i2c_block_data(&pcf->client, -+ PCF50633_REG_AUTOOUT, -+ sizeof(misc), -+ &misc[0]); -+ if (ret) -+ dev_err(dev, "Failed to restore misc :-( %d\n", ret); -+ -+ /* platform can choose to defer backlight bringup */ -+ if (!pcf->pdata->defer_resume_backlight) -+ pcf50633_backlight_resume(pcf); -+ -+ /* regulator voltages and enable states */ -+ ret = i2c_smbus_write_i2c_block_data(&pcf->client, -+ PCF50633_REG_LDO1OUT, -+ sizeof(pcf->standby_regs.ldo), -+ &pcf->standby_regs.ldo[0]); -+ if (ret) -+ dev_err(dev, "Failed to restore LDOs :-( %d\n", ret); -+ -+ memset(res, 0, sizeof(res)); -+ /* not interested in second on resume */ -+ res[0] = PCF50633_INT1_SECOND; -+ ret = i2c_smbus_write_i2c_block_data(&pcf->client, -+ PCF50633_REG_INT1M, -+ 5, &res[0]); -+ if (ret) -+ dev_err(dev, "Failed to set int masks :-( %d\n", ret); -+ -+ pcf->suspend_state = PCF50633_SS_COMPLETED_RESUME; -+ -+ enable_irq(pcf->irq); -+ -+ mutex_unlock(&pcf->lock); -+ -+ /* gratuitous call to PCF work function, in the case that the PCF -+ * interrupt edge was missed during resume, this forces the pending -+ * register clear and lifts the interrupt back high again. In the -+ * case nothing is waiting for service, no harm done. -+ */ -+ -+ get_device(&pcf->client.dev); -+ pcf50633_work(&pcf->work); -+ -+ pcf->is_suspended = 0; -+ callback_all_resume_dependencies(&pcf->resume_dependency); -+ -+ return 0; -+} -+#else -+#define pcf50633_suspend NULL -+#define pcf50633_resume NULL -+#endif -+ -+static struct i2c_driver pcf50633_driver = { -+ .driver = { -+ .name = "pcf50633", -+ .suspend= pcf50633_suspend, -+ .resume = pcf50633_resume, -+ }, -+ .id = I2C_DRIVERID_PCF50633, -+ .attach_adapter = pcf50633_attach_adapter, -+ .detach_client = pcf50633_detach_client, -+}; -+ -+/* we have this purely to capture an early indication that we are coming out -+ * of suspend, before our device resume got called; async interrupt service is -+ * interested in this -+ */ -+ -+static int pcf50633_plat_resume(struct platform_device *pdev) -+{ -+ /* i2c_get_clientdata(to_i2c_client(&pdev->dev)) returns NULL at this -+ * early resume time so we have to use pcf50633_global -+ */ -+ pcf50633_global->suspend_state = PCF50633_SS_RESUMING_BUT_NOT_US_YET; -+ -+ return 0; -+} -+ -+/* platform driver, since i2c devices don't have platform_data */ -+static int __init pcf50633_plat_probe(struct platform_device *pdev) -+{ -+ struct pcf50633_platform_data *pdata = pdev->dev.platform_data; -+ -+ if (!pdata) -+ return -ENODEV; -+ -+ pcf50633_pdev = pdev; -+ -+ return 0; -+} -+ -+static int pcf50633_plat_remove(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+static struct platform_driver pcf50633_plat_driver = { -+ .probe = pcf50633_plat_probe, -+ .remove = pcf50633_plat_remove, -+ .resume_early = pcf50633_plat_resume, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "pcf50633", -+ }, -+}; -+ -+static int __init pcf50633_init(void) -+{ -+ int rc; -+ -+ if (!(rc = platform_driver_register(&pcf50633_plat_driver))) -+ rc = i2c_add_driver(&pcf50633_driver); -+ -+ return rc; -+} -+ -+static void pcf50633_exit(void) -+{ -+ i2c_del_driver(&pcf50633_driver); -+ platform_driver_unregister(&pcf50633_plat_driver); -+} -+ -+MODULE_DESCRIPTION("I2C chip driver for NXP PCF50633 power management unit"); -+MODULE_AUTHOR("Harald Welte "); -+MODULE_LICENSE("GPL"); -+ -+module_init(pcf50633_init); -+module_exit(pcf50633_exit); -Index: linux-2.6.24.7/drivers/i2c/chips/pcf50633.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/i2c/chips/pcf50633.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,349 @@ -+#ifndef _PCF50633_H -+#define _PCF50633_H -+ -+/* Philips PCF50633 Power Managemnt Unit (PMU) driver -+ * (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * -+ */ -+ -+enum pfc50633_regs { -+ PCF50633_REG_VERSION = 0x00, -+ PCF50633_REG_VARIANT = 0x01, -+ PCF50633_REG_INT1 = 0x02, /* Interrupt Status */ -+ PCF50633_REG_INT2 = 0x03, /* Interrupt Status */ -+ PCF50633_REG_INT3 = 0x04, /* Interrupt Status */ -+ PCF50633_REG_INT4 = 0x05, /* Interrupt Status */ -+ PCF50633_REG_INT5 = 0x06, /* Interrupt Status */ -+ PCF50633_REG_INT1M = 0x07, /* Interrupt Mask */ -+ PCF50633_REG_INT2M = 0x08, /* Interrupt Mask */ -+ PCF50633_REG_INT3M = 0x09, /* Interrupt Mask */ -+ PCF50633_REG_INT4M = 0x0a, /* Interrupt Mask */ -+ PCF50633_REG_INT5M = 0x0b, /* Interrupt Mask */ -+ PCF50633_REG_OOCSHDWN = 0x0c, -+ PCF50633_REG_OOCWAKE = 0x0d, -+ PCF50633_REG_OOCTIM1 = 0x0e, -+ PCF50633_REG_OOCTIM2 = 0x0f, -+ PCF50633_REG_OOCMODE = 0x10, -+ PCF50633_REG_OOCCTL = 0x11, -+ PCF50633_REG_OOCSTAT = 0x12, -+ PCF50633_REG_GPIOCTL = 0x13, -+ PCF50633_REG_GPIO1CFG = 0x14, -+ PCF50633_REG_GPIO2CFG = 0x15, -+ PCF50633_REG_GPIO3CFG = 0x16, -+ PCF50633_REG_GPOCFG = 0x17, -+ PCF50633_REG_BVMCTL = 0x18, -+ PCF50633_REG_SVMCTL = 0x19, -+ PCF50633_REG_AUTOOUT = 0x1a, -+ PCF50633_REG_AUTOENA = 0x1b, -+ PCF50633_REG_AUTOCTL = 0x1c, -+ PCF50633_REG_AUTOMXC = 0x1d, -+ PCF50633_REG_DOWN1OUT = 0x1e, -+ PCF50633_REG_DOWN1ENA = 0x1f, -+ PCF50633_REG_DOWN1CTL = 0x20, -+ PCF50633_REG_DOWN1MXC = 0x21, -+ PCF50633_REG_DOWN2OUT = 0x22, -+ PCF50633_REG_DOWN2ENA = 0x23, -+ PCF50633_REG_DOWN2CTL = 0x24, -+ PCF50633_REG_DOWN2MXC = 0x25, -+ PCF50633_REG_MEMLDOOUT = 0x26, -+ PCF50633_REG_MEMLDOENA = 0x27, -+ PCF50633_REG_LEDOUT = 0x28, -+ PCF50633_REG_LEDENA = 0x29, -+ PCF50633_REG_LEDCTL = 0x2a, -+ PCF50633_REG_LEDDIM = 0x2b, -+ /* reserved */ -+ PCF50633_REG_LDO1OUT = 0x2d, -+ PCF50633_REG_LDO1ENA = 0x2e, -+ PCF50633_REG_LDO2OUT = 0x2f, -+ PCF50633_REG_LDO2ENA = 0x30, -+ PCF50633_REG_LDO3OUT = 0x31, -+ PCF50633_REG_LDO3ENA = 0x32, -+ PCF50633_REG_LDO4OUT = 0x33, -+ PCF50633_REG_LDO4ENA = 0x34, -+ PCF50633_REG_LDO5OUT = 0x35, -+ PCF50633_REG_LDO5ENA = 0x36, -+ PCF50633_REG_LDO6OUT = 0x37, -+ PCF50633_REG_LDO6ENA = 0x38, -+ PCF50633_REG_HCLDOOUT = 0x39, -+ PCF50633_REG_HCLDOENA = 0x3a, -+ PCF50633_REG_STBYCTL1 = 0x3b, -+ PCF50633_REG_STBYCTL2 = 0x3c, -+ PCF50633_REG_DEBPF1 = 0x3d, -+ PCF50633_REG_DEBPF2 = 0x3e, -+ PCF50633_REG_DEBPF3 = 0x3f, -+ PCF50633_REG_HCLDOOVL = 0x40, -+ PCF50633_REG_DCDCSTAT = 0x41, -+ PCF50633_REG_LDOSTAT = 0x42, -+ PCF50633_REG_MBCC1 = 0x43, -+ PCF50633_REG_MBCC2 = 0x44, -+ PCF50633_REG_MBCC3 = 0x45, -+ PCF50633_REG_MBCC4 = 0x46, -+ PCF50633_REG_MBCC5 = 0x47, -+ PCF50633_REG_MBCC6 = 0x48, -+ PCF50633_REG_MBCC7 = 0x49, -+ PCF50633_REG_MBCC8 = 0x4a, -+ PCF50633_REG_MBCS1 = 0x4b, -+ PCF50633_REG_MBCS2 = 0x4c, -+ PCF50633_REG_MBCS3 = 0x4d, -+ PCF50633_REG_BBCCTL = 0x4e, -+ PCF50633_REG_ALMGAIN = 0x4f, -+ PCF50633_REG_ALMDATA = 0x50, -+ /* reserved */ -+ PCF50633_REG_ADCC3 = 0x52, -+ PCF50633_REG_ADCC2 = 0x53, -+ PCF50633_REG_ADCC1 = 0x54, -+ PCF50633_REG_ADCS1 = 0x55, -+ PCF50633_REG_ADCS2 = 0x56, -+ PCF50633_REG_ADCS3 = 0x57, -+ /* reserved */ -+ PCF50633_REG_RTCSC = 0x59, /* Second */ -+ PCF50633_REG_RTCMN = 0x5a, /* Minute */ -+ PCF50633_REG_RTCHR = 0x5b, /* Hour */ -+ PCF50633_REG_RTCWD = 0x5c, /* Weekday */ -+ PCF50633_REG_RTCDT = 0x5d, /* Day */ -+ PCF50633_REG_RTCMT = 0x5e, /* Month */ -+ PCF50633_REG_RTCYR = 0x5f, /* Year */ -+ PCF50633_REG_RTCSCA = 0x60, /* Alarm Second */ -+ PCF50633_REG_RTCMNA = 0x61, /* Alarm Minute */ -+ PCF50633_REG_RTCHRA = 0x62, /* Alarm Hour */ -+ PCF50633_REG_RTCWDA = 0x63, /* Alarm Weekday */ -+ PCF50633_REG_RTCDTA = 0x64, /* Alarm Day */ -+ PCF50633_REG_RTCMTA = 0x65, /* Alarm Month */ -+ PCF50633_REG_RTCYRA = 0x66, /* Alarm Year */ -+ -+ PCF50633_REG_MEMBYTE0 = 0x67, -+ PCF50633_REG_MEMBYTE1 = 0x68, -+ PCF50633_REG_MEMBYTE2 = 0x69, -+ PCF50633_REG_MEMBYTE3 = 0x6a, -+ PCF50633_REG_MEMBYTE4 = 0x6b, -+ PCF50633_REG_MEMBYTE5 = 0x6c, -+ PCF50633_REG_MEMBYTE6 = 0x6d, -+ PCF50633_REG_MEMBYTE7 = 0x6e, -+ /* reserved */ -+ PCF50633_REG_DCDCPFM = 0x84, -+ __NUM_PCF50633_REGS -+}; -+ -+ -+enum pcf50633_reg_oocshdwn { -+ PCF50633_OOCSHDWN_GOSTDBY = 0x01, -+ PCF50633_OOCSHDWN_TOTRST = 0x04, -+ PCF50633_OOCSHDWN_COLDBOOT = 0x08, -+}; -+ -+enum pcf50633_reg_oocwake { -+ PCF50633_OOCWAKE_ONKEY = 0x01, -+ PCF50633_OOCWAKE_EXTON1 = 0x02, -+ PCF50633_OOCWAKE_EXTON2 = 0x04, -+ PCF50633_OOCWAKE_EXTON3 = 0x08, -+ PCF50633_OOCWAKE_RTC = 0x10, -+ /* reserved */ -+ PCF50633_OOCWAKE_USB = 0x40, -+ PCF50633_OOCWAKE_ADP = 0x80, -+}; -+ -+enum pcf50633_reg_mbcc1 { -+ PCF50633_MBCC1_CHGENA = 0x01, /* Charger enable */ -+ PCF50633_MBCC1_AUTOSTOP = 0x02, -+ PCF50633_MBCC1_AUTORES = 0x04, /* automatic resume */ -+ PCF50633_MBCC1_RESUME = 0x08, /* explicit resume cmd */ -+ PCF50633_MBCC1_RESTART = 0x10, /* restart charging */ -+ PCF50633_MBCC1_PREWDTIME_60M = 0x20, /* max. precharging time */ -+ PCF50633_MBCC1_WDTIME_1H = 0x00, -+ PCF50633_MBCC1_WDTIME_2H = 0x40, -+ PCF50633_MBCC1_WDTIME_4H = 0x80, -+ PCF50633_MBCC1_WDTIME_6H = 0xc0, -+}; -+#define PCF50633_MBCC1_WDTIME_MASK 0xc0 -+ -+enum pcf50633_reg_mbcc2 { -+ PCF50633_MBCC2_VBATCOND_2V7 = 0x00, -+ PCF50633_MBCC2_VBATCOND_2V85 = 0x01, -+ PCF50633_MBCC2_VBATCOND_3V0 = 0x02, -+ PCF50633_MBCC2_VBATCOND_3V15 = 0x03, -+ PCF50633_MBCC2_VMAX_4V = 0x00, -+ PCF50633_MBCC2_VMAX_4V20 = 0x28, -+ PCF50633_MBCC2_VRESDEBTIME_64S = 0x80, /* debounce time (32/64sec) */ -+}; -+#define PCF50633_MBCC2_VBATCOND_MASK 0x03 -+#define PCF50633_MBCC2_VMAX_MASK 0x3c -+ -+enum pcf50633_reg_adcc1 { -+ PCF50633_ADCC1_ADCSTART = 0x01, -+ PCF50633_ADCC1_RES_10BIT = 0x02, -+ PCF50633_ADCC1_AVERAGE_NO = 0x00, -+ PCF50633_ADCC1_AVERAGE_4 = 0x04, -+ PCF50633_ADCC1_AVERAGE_8 = 0x08, -+ PCF50633_ADCC1_AVERAGE_16 = 0x0c, -+ -+ PCF50633_ADCC1_MUX_BATSNS_RES = 0x00, -+ PCF50633_ADCC1_MUX_BATSNS_SUBTR = 0x10, -+ PCF50633_ADCC1_MUX_ADCIN2_RES = 0x20, -+ PCF50633_ADCC1_MUX_ADCIN2_SUBTR = 0x30, -+ PCF50633_ADCC1_MUX_BATTEMP = 0x60, -+ PCF50633_ADCC1_MUX_ADCIN1 = 0x70, -+}; -+#define PCF50633_ADCC1_AVERAGE_MASK 0x0c -+#define PCF50633_ADCC1_ADCMUX_MASK 0xf0 -+ -+enum pcf50633_reg_adcc2 { -+ PCF50633_ADCC2_RATIO_NONE = 0x00, -+ PCF50633_ADCC2_RATIO_BATTEMP = 0x01, -+ PCF50633_ADCC2_RATIO_ADCIN1 = 0x02, -+ PCF50633_ADCC2_RATIO_BOTH = 0x03, -+ PCF50633_ADCC2_RATIOSETTL_100US = 0x04, -+}; -+#define PCF50633_ADCC2_RATIO_MASK 0x03 -+ -+enum pcf50633_reg_adcc3 { -+ PCF50633_ADCC3_ACCSW_EN = 0x01, -+ PCF50633_ADCC3_NTCSW_EN = 0x04, -+ PCF50633_ADCC3_RES_DIV_TWO = 0x10, -+ PCF50633_ADCC3_RES_DIV_THREE = 0x00, -+}; -+ -+enum pcf50633_reg_adcs3 { -+ PCF50633_ADCS3_REF_NTCSW = 0x00, -+ PCF50633_ADCS3_REF_ACCSW = 0x10, -+ PCF50633_ADCS3_REF_2V0 = 0x20, -+ PCF50633_ADCS3_REF_VISA = 0x30, -+ PCF50633_ADCS3_REF_2V0_2 = 0x70, -+ PCF50633_ADCS3_ADCRDY = 0x80, -+}; -+#define PCF50633_ADCS3_ADCDAT1L_MASK 0x03 -+#define PCF50633_ADCS3_ADCDAT2L_MASK 0x0c -+#define PCF50633_ADCS3_ADCDAT2L_SHIFT 2 -+#define PCF50633_ASCS3_REF_MASK 0x70 -+ -+enum pcf50633_regulator_enable { -+ PCF50633_REGULATOR_ON = 0x01, -+ PCF50633_REGULATOR_ON_GPIO1 = 0x02, -+ PCF50633_REGULATOR_ON_GPIO2 = 0x04, -+ PCF50633_REGULATOR_ON_GPIO3 = 0x08, -+}; -+#define PCF50633_REGULATOR_ON_MASK 0x0f -+ -+enum pcf50633_regulator_phase { -+ PCF50633_REGULATOR_ACTPH1 = 0x00, -+ PCF50633_REGULATOR_ACTPH2 = 0x10, -+ PCF50633_REGULATOR_ACTPH3 = 0x20, -+ PCF50633_REGULATOR_ACTPH4 = 0x30, -+}; -+#define PCF50633_REGULATOR_ACTPH_MASK 0x30 -+ -+enum pcf50633_reg_gpocfg { -+ PCF50633_GPOCFG_GPOSEL_0 = 0x00, -+ PCF50633_GPOCFG_GPOSEL_LED_NFET = 0x01, -+ PCF50633_GPOCFG_GPOSEL_SYSxOK = 0x02, -+ PCF50633_GPOCFG_GPOSEL_CLK32K = 0x03, -+ PCF50633_GPOCFG_GPOSEL_ADAPUSB = 0x04, -+ PCF50633_GPOCFG_GPOSEL_USBxOK = 0x05, -+ PCF50633_GPOCFG_GPOSEL_ACTPH4 = 0x06, -+ PCF50633_GPOCFG_GPOSEL_1 = 0x07, -+ PCF50633_GPOCFG_GPOSEL_INVERSE = 0x08, -+}; -+#define PCF50633_GPOCFG_GPOSEL_MASK 0x07 -+ -+#if 0 -+enum pcf50633_reg_mbcc1 { -+ PCF50633_MBCC1_CHGENA = 0x01, -+ PCF50633_MBCC1_AUTOSTOP = 0x02, -+ PCF50633_MBCC1_AUTORES = 0x04, -+ PCF50633_MBCC1_RESUME = 0x08, -+ PCF50633_MBCC1_RESTART = 0x10, -+ PCF50633_MBCC1_PREWDTIME_30MIN = 0x00, -+ PCF50633_MBCC1_PREWDTIME_60MIN = 0x20, -+ PCF50633_MBCC1_WDTIME_2HRS = 0x40, -+ PCF50633_MBCC1_WDTIME_4HRS = 0x80, -+ PCF50633_MBCC1_WDTIME_6HRS = 0xc0, -+}; -+ -+enum pcf50633_reg_mbcc2 { -+ PCF50633_MBCC2_VBATCOND_2V7 = 0x00, -+ PCF50633_MBCC2_VBATCOND_2V85 = 0x01, -+ PCF50633_MBCC2_VBATCOND_3V0 = 0x02, -+ PCF50633_MBCC2_VBATCOND_3V15 = 0x03, -+ PCF50633_MBCC2_VRESDEBTIME_64S = 0x80, -+}; -+#define PCF50633_MBCC2_VMAX_MASK 0x3c -+#endif -+ -+enum pcf50633_reg_mbcc7 { -+ PCF50633_MBCC7_USB_100mA = 0x00, -+ PCF50633_MBCC7_USB_500mA = 0x01, -+ PCF50633_MBCC7_USB_1000mA = 0x02, -+ PCF50633_MBCC7_USB_SUSPEND = 0x03, -+ PCF50633_MBCC7_BATTEMP_EN = 0x04, -+ PCF50633_MBCC7_BATSYSIMAX_1A6 = 0x00, -+ PCF50633_MBCC7_BATSYSIMAX_1A8 = 0x40, -+ PCF50633_MBCC7_BATSYSIMAX_2A0 = 0x80, -+ PCF50633_MBCC7_BATSYSIMAX_2A2 = 0xc0, -+}; -+#define PCF56033_MBCC7_USB_MASK 0x03 -+ -+enum pcf50633_reg_mbcc8 { -+ PCF50633_MBCC8_USBENASUS = 0x10, -+}; -+ -+enum pcf50633_reg_mbcs1 { -+ PCF50633_MBCS1_USBPRES = 0x01, -+ PCF50633_MBCS1_USBOK = 0x02, -+ PCF50633_MBCS1_ADAPTPRES = 0x04, -+ PCF50633_MBCS1_ADAPTOK = 0x08, -+ PCF50633_MBCS1_TBAT_OK = 0x00, -+ PCF50633_MBCS1_TBAT_ABOVE = 0x10, -+ PCF50633_MBCS1_TBAT_BELOW = 0x20, -+ PCF50633_MBCS1_TBAT_UNDEF = 0x30, -+ PCF50633_MBCS1_PREWDTEXP = 0x40, -+ PCF50633_MBCS1_WDTEXP = 0x80, -+}; -+ -+enum pcf50633_reg_mbcs2_mbcmod { -+ PCF50633_MBCS2_MBC_PLAY = 0x00, -+ PCF50633_MBCS2_MBC_USB_PRE = 0x01, -+ PCF50633_MBCS2_MBC_USB_PRE_WAIT = 0x02, -+ PCF50633_MBCS2_MBC_USB_FAST = 0x03, -+ PCF50633_MBCS2_MBC_USB_FAST_WAIT= 0x04, -+ PCF50633_MBCS2_MBC_USB_SUSPEND = 0x05, -+ PCF50633_MBCS2_MBC_ADP_PRE = 0x06, -+ PCF50633_MBCS2_MBC_ADP_PRE_WAIT = 0x07, -+ PCF50633_MBCS2_MBC_ADP_FAST = 0x08, -+ PCF50633_MBCS2_MBC_ADP_FAST_WAIT= 0x09, -+ PCF50633_MBCS2_MBC_BAT_FULL = 0x0a, -+ PCF50633_MBCS2_MBC_HALT = 0x0b, -+}; -+#define PCF50633_MBCS2_MBC_MASK 0x0f -+enum pcf50633_reg_mbcs2_chgstat { -+ PCF50633_MBCS2_CHGS_NONE = 0x00, -+ PCF50633_MBCS2_CHGS_ADAPTER = 0x10, -+ PCF50633_MBCS2_CHGS_USB = 0x20, -+ PCF50633_MBCS2_CHGS_BOTH = 0x30, -+}; -+#define PCF50633_MBCS2_RESSTAT_AUTO 0x40 -+ -+enum pcf50633_reg_mbcs3 { -+ PCF50633_MBCS3_USBLIM_PLAY = 0x01, -+ PCF50633_MBCS3_USBLIM_CGH = 0x02, -+ PCF50633_MBCS3_TLIM_PLAY = 0x04, -+ PCF50633_MBCS3_TLIM_CHG = 0x08, -+ PCF50633_MBCS3_ILIM = 0x10, /* 1: Ibat > Icutoff */ -+ PCF50633_MBCS3_VLIM = 0x20, /* 1: Vbat == Vmax */ -+ PCF50633_MBCS3_VBATSTAT = 0x40, /* 1: Vbat > Vbatcond */ -+ PCF50633_MBCS3_VRES = 0x80, /* 1: Vbat > Vth(RES) */ -+}; -+ -+/* this is to be provided by the board implementation */ -+extern const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS]; -+ -+void pcf50633_reg_write(u_int8_t reg, u_int8_t val); -+ -+u_int8_t pcf50633_reg_read(u_int8_t reg); -+ -+void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val); -+void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits); -+ -+void pcf50633_charge_autofast(int on); -+ -+#endif /* _PCF50606_H */ -+ -Index: linux-2.6.24.7/drivers/i2c/chips/tsl256x.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/i2c/chips/tsl256x.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,310 @@ -+/* -+ * tsl256x.c -- TSL256x Light Sensor driver -+ * -+ * Copyright 2007 by Fiwin. -+ * Author: Alec Tsai -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This I2C client driver refers to pcf50606.c. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "tsl256x.h" -+ -+static unsigned short normal_i2c[] = { 0x39, I2C_CLIENT_END }; -+/* Magic definition of all other variables and things */ -+I2C_CLIENT_INSMOD; -+ -+struct tsl256x_data { -+ struct i2c_client client; -+ struct mutex lock; -+ struct input_dev *input_dev; -+}; -+ -+static struct i2c_driver tsl256x_driver; -+ -+/****************************************************************************** -+ * Low-Level routines -+ *****************************************************************************/ -+static inline int __reg_write(struct tsl256x_data *tsl, u_int8_t reg, -+ u_int8_t val) -+{ -+ return i2c_smbus_write_byte_data(&tsl->client, reg, val); -+} -+ -+static int reg_write(struct tsl256x_data *tsl, u_int8_t reg, u_int8_t val) -+{ -+ int ret; -+ -+ mutex_lock(&tsl->lock); -+ ret = __reg_write(tsl, reg, val); -+ mutex_unlock(&tsl->lock); -+ -+ return ret; -+} -+ -+static inline int32_t __reg_read(struct tsl256x_data *tsl, u_int8_t reg) -+{ -+ int32_t ret; -+ -+ ret = i2c_smbus_read_byte_data(&tsl->client, reg); -+ -+ return ret; -+} -+ -+static u_int8_t reg_read(struct tsl256x_data *tsl, u_int8_t reg) -+{ -+ int32_t ret; -+ -+ mutex_lock(&tsl->lock); -+ ret = __reg_read(tsl, reg); -+ mutex_unlock(&tsl->lock); -+ -+ return ret & 0xff; -+} -+ -+u_int32_t calculate_lux(u_int32_t iGain, u_int32_t iType, u_int32_t ch0, -+ u_int32_t ch1) -+{ -+ u_int32_t channel0 = ch0 * 636 / 10; -+ u_int32_t channel1 = ch1 * 636 / 10; -+ u_int32_t lux_value = 0; -+ u_int32_t ratio = (channel1 * (2^RATIO_SCALE)) / channel0; -+ u_int32_t b = 0, m = 0; -+ -+ if (0 == ch0) -+ return 0; -+ else { -+ if (ratio > (13 * (2^RATIO_SCALE) / 10)) -+ return 0; -+ } -+ -+ switch (iType) { -+ case 0: // T package -+ if ((ratio >= 0) && (ratio <= K1T)) { -+ b = B1T; -+ m = M1T; -+ } else if (ratio <= K2T) { -+ b = B2T; -+ m = M2T; -+ } else if (ratio <= K3T) { -+ b = B3T; -+ m = M3T; -+ } else if (ratio <= K4T) { -+ b = B4T; -+ m = M4T; -+ } else if (ratio <= K5T) { -+ b = B5T; -+ m = M5T; -+ } else if (ratio <= K6T) { -+ b = B6T; -+ m = M6T; -+ } else if (ratio <= K7T) { -+ b = B7T; -+ m = M7T; -+ } else if (ratio > K8T) { -+ b = B8T; -+ m = M8T; -+ } -+ break; -+ case 1:// CS package -+ if ((ratio >= 0) && (ratio <= K1C)) { -+ b = B1C; -+ m = M1C; -+ } else if (ratio <= K2C) { -+ b = B2C; -+ m = M2C; -+ } else if (ratio <= K3C) { -+ b = B3C; -+ m = M3C; -+ } else if (ratio <= K4C) { -+ b = B4C; -+ m = M4C; -+ } else if (ratio <= K5C) { -+ b = B5C; -+ m = M5C; -+ } else if (ratio <= K6C) { -+ b = B6C; -+ m = M6C; -+ } else if (ratio <= K7C) { -+ b = B7C; -+ m = M7C; -+ } else if (ratio > K8C) { -+ b = B8C; -+ m = M8C; -+ } -+ break; -+ default: -+ return 0; -+ break; -+ } -+ -+ lux_value = ((channel0 * b) - (channel1 * m)) / 16384; -+ return(lux_value); -+} -+ -+static ssize_t tsl256x_show_light_lux(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct tsl256x_data *tsl = i2c_get_clientdata(client); -+ u_int8_t low_byte_of_ch0 = 0, high_byte_of_ch0 = 0; -+ u_int8_t low_byte_of_ch1 = 0, high_byte_of_ch1 = 0; -+ u_int32_t adc_value_ch0, adc_value_ch1, adc_value; -+ -+ low_byte_of_ch0 = reg_read(tsl, TSL256X_REG_DATA0LOW); -+ high_byte_of_ch0 = reg_read(tsl, TSL256X_REG_DATA0HIGH); -+ low_byte_of_ch1 = reg_read(tsl, TSL256X_REG_DATA1LOW); -+ high_byte_of_ch1 = reg_read(tsl, TSL256X_REG_DATA1HIGH); -+ -+ adc_value_ch0 = (high_byte_of_ch0 * 256 + low_byte_of_ch0) * 16; -+ adc_value_ch1 = (high_byte_of_ch1 * 256 + low_byte_of_ch1) * 16; -+ -+ adc_value = calculate_lux(0, 0, adc_value_ch0, adc_value_ch1); -+ return sprintf(buf, "%d\n", adc_value); -+} -+ -+static DEVICE_ATTR(light_lux, S_IRUGO, tsl256x_show_light_lux, NULL); -+ -+static int tsl256x_detect(struct i2c_adapter *adapter, int address, int kind) -+{ -+ struct i2c_client *new_client = NULL; -+ struct tsl256x_data *tsl256x = NULL; -+ u_int8_t id = 0; -+ int res = 0; -+ -+ if (!(tsl256x = kzalloc(sizeof(*tsl256x), GFP_KERNEL))) -+ return -ENOMEM; -+ -+ mutex_init(&tsl256x->lock); -+ new_client = &tsl256x->client; -+ i2c_set_clientdata(new_client, tsl256x); -+ new_client->addr = address; -+ new_client->adapter = adapter; -+ new_client->driver = &tsl256x_driver; -+ new_client->flags = 0; -+ strlcpy(new_client->name, "tsl256x", I2C_NAME_SIZE); -+ -+ /* now we try to detect the chip */ -+ /* register with i2c core */ -+ res = i2c_attach_client(new_client); -+ if (res) { -+ printk(KERN_DEBUG "[%s]Error: during i2c_attach_client()\n", -+ new_client->name); -+ goto exit_free; -+ } else { -+ printk(KERN_INFO "TSL256X is attached to I2C bus.\n"); -+ } -+ -+ /* Configure TSL256X. */ -+ { -+ /* Power up TSL256X. */ -+ reg_write(tsl256x, TSL256X_REG_CONTROL, 0x03); -+ -+ /* Check TSL256X ID. */ -+ id = reg_read(tsl256x, TSL256X_REG_ID); -+ if (TSL2561_ID == (id & 0xF0)) { -+ /* Configuring the Timing Register. -+ High Gain (16x), integration time of 101ms. */ -+ reg_write(tsl256x, TSL256X_REG_TIMING, 0x11); -+ } else { -+ goto exit_free; -+ } -+ } -+ -+ res = device_create_file(&new_client->dev, &dev_attr_light_lux); -+ if (res) -+ goto exit_detach; -+ -+ return 0; -+ -+exit_free: -+ kfree(tsl256x); -+ return res; -+exit_detach: -+ i2c_detach_client(new_client); -+ return res; -+} -+ -+static int tsl256x_attach_adapter(struct i2c_adapter *adapter) -+{ -+ return i2c_probe(adapter, &addr_data, &tsl256x_detect); -+} -+ -+static int tsl256x_detach_client(struct i2c_client *client) -+{ -+ struct tsl256x_data *tsl256x = i2c_get_clientdata(client); -+ -+ printk(KERN_INFO "Detach TSL256X from I2C bus.\n"); -+ -+ /* Power down TSL256X. */ -+ reg_write(tsl256x, TSL256X_REG_CONTROL, 0x00); -+ -+ device_remove_file(&client->dev, &dev_attr_light_lux); -+ kfree(tsl256x); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int tsl256x_suspend(struct device *dev, pm_message_t state) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct tsl256x_data *tsl256x = i2c_get_clientdata(client); -+ -+ /* Power down TSL256X. */ -+ reg_write(tsl256x, TSL256X_REG_CONTROL, 0x00); -+ -+ return 0; -+} -+ -+static int tsl256x_resume(struct device *dev) -+{ -+ struct i2c_client *client = to_i2c_client(dev); -+ struct tsl256x_data *tsl256x = i2c_get_clientdata(client); -+ -+ /* Power up TSL256X. */ -+ reg_write(tsl256x, TSL256X_REG_CONTROL, 0x03); -+ -+ return 0; -+} -+#endif -+ -+static struct i2c_driver tsl256x_driver = { -+ .driver = { -+ .name = "tsl256x", -+ .owner = THIS_MODULE, -+#ifdef CONFIG_PM -+ .suspend = tsl256x_suspend, -+ .resume = tsl256x_resume, -+#endif -+ }, -+ .id = I2C_DRIVERID_TSL256X, -+ .attach_adapter = tsl256x_attach_adapter, -+ .detach_client = tsl256x_detach_client, -+}; -+ -+static int __init tsl256x_init(void) -+{ -+ return i2c_add_driver(&tsl256x_driver); -+} -+ -+static void __exit tsl256x_exit(void) -+{ -+ i2c_del_driver(&tsl256x_driver); -+} -+ -+MODULE_AUTHOR("Alec Tsai "); -+MODULE_LICENSE("GPL"); -+ -+module_init(tsl256x_init); -+module_exit(tsl256x_exit); -+ -Index: linux-2.6.24.7/drivers/i2c/chips/tsl256x.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/i2c/chips/tsl256x.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,154 @@ -+/* -+ * tsl256x.h -- TSL256x Light Sensor driver -+ * -+ * Copyright 2007 by Fiwin. -+ * Author: Alec Tsai -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * The contents of header file is copied from TSL256x Datasheet. -+ */ -+ -+#ifndef _TSL256X_H -+#define _TSL256X_H -+ -+#define TSL2560_ID 0x00 -+#define TSL2561_ID 0x10 -+ -+#define LUX_SCALE 14 /* scale by 2^14 */ -+#define RATIO_SCALE 9 /*scale ratio by 2^9 */ -+ -+/****************************************************************************** -+ * Integration time scaling factors -+ *****************************************************************************/ -+#define CH_SCALE 10 /* scale channel values by 2^10 */ -+#define CHSCALE_TINT0 0x7517 /* 322/11 * 2^CH_SCALE */ -+#define CHSCALE_TINT1 0x0fe7 /* 322/81 * 2^CH_SCALE */ -+ -+/****************************************************************************** -+ * T Package coefficients -+ *****************************************************************************/ -+/* -+ * For Ch1/Ch0=0.00 to 0.50 -+ * Lux/Ch0=0.0304.0.062*((Ch1/Ch0)^1.4) -+ * piecewise approximation -+ * For Ch1/Ch0=0.00 to 0.125: -+ * Lux/Ch0=0.0304.0.0272*(Ch1/Ch0) -+ * -+ * For Ch1/Ch0=0.125 to 0.250: -+ * Lux/Ch0=0.0325.0.0440*(Ch1/Ch0) -+ * -+ * For Ch1/Ch0=0.250 to 0.375: -+ * Lux/Ch0=0.0351.0.0544*(Ch1/Ch0) -+ * -+ * For Ch1/Ch0=0.375 to 0.50: -+ * Lux/Ch0=0.0381.0.0624*(Ch1/Ch0) -+ * -+ * For Ch1/Ch0=0.50 to 0.61: -+ * Lux/Ch0=0.0224.0.031*(Ch1/Ch0) -+ * -+ * For Ch1/Ch0=0.61 to 0.80: -+ * Lux/Ch0=0.0128.0.0153*(Ch1/Ch0) -+ * -+ * For Ch1/Ch0=0.80 to 1.30: -+ * Lux/Ch0=0.00146.0.00112*(Ch1/Ch0) -+ * -+ * For Ch1/Ch0>1.3: -+ * Lux/Ch0=0 -+ */ -+#define K1T 0x0040 /* 0.125 * 2^RATIO_SCALE */ -+#define B1T 0x01f2 /* 0.0304 * 2^LUX_SCALE */ -+#define M1T 0x01be /* 0.0272 * 2^LUX_SCALE */ -+#define K2T 0x0080 /* 0.250 * 2^RATIO_SCALE */ -+#define B2T 0x0214 /* 0.0325 * 2^LUX_SCALE */ -+#define M2T 0x02d1 /* 0.0440 * 2^LUX_SCALE */ -+#define K3T 0x00c0 /* 0.375 * 2^RATIO_SCALE */ -+#define B3T 0x023f /* 0.0351 * 2^LUX_SCALE */ -+#define M3T 0x037b /* 0.0544 * 2^LUX_SCALE */ -+#define K4T 0x0100 /* 0.50 * 2^RATIO_SCALE */ -+#define B4T 0x0270 /* 0.0381 * 2^LUX_SCALE */ -+#define M4T 0x03fe /* 0.0624 * 2^LUX_SCALE */ -+#define K5T 0x0138 /* 0.61 * 2^RATIO_SCALE */ -+#define B5T 0x016f /* 0.0224 * 2^LUX_SCALE */ -+#define M5T 0x01fc /* 0.0310 * 2^LUX_SCALE */ -+#define K6T 0x019a /* 0.80 * 2^RATIO_SCALE */ -+#define B6T 0x00d2 /* 0.0128 * 2^LUX_SCALE */ -+#define M6T 0x00fb /* 0.0153 * 2^LUX_SCALE */ -+#define K7T 0x029a /* 1.3 * 2^RATIO_SCALE */ -+#define B7T 0x0018 /* 0.00146 * 2^LUX_SCALE */ -+#define M7T 0x0012 /* 0.00112 * 2^LUX_SCALE */ -+#define K8T 0x029a /* 1.3 * 2^RATIO_SCALE */ -+#define B8T 0x0000 /* 0.000 * 2^LUX_SCALE */ -+#define M8T 0x0000 /* 0.000 * 2^LUX_SCALE */ -+ -+/****************************************************************************** -+ * CS package coefficients -+ *****************************************************************************/ -+/* -+ * For 0 <= Ch1/Ch0 <= 0.52 -+ * Lux/Ch0 = 0.0315.0.0593*((Ch1/Ch0)^1.4) -+ * piecewise approximation -+ * For 0 <= Ch1/Ch0 <= 0.13 -+ * Lux/Ch0 = 0.0315.0.0262*(Ch1/Ch0) -+ * For 0.13 <= Ch1/Ch0 <= 0.26 -+ * Lux/Ch0 = 0.0337.0.0430*(Ch1/Ch0) -+ * For 0.26 <= Ch1/Ch0 <= 0.39 -+ * Lux/Ch0 = 0.0363.0.0529*(Ch1/Ch0) -+ * For 0.39 <= Ch1/Ch0 <= 0.52 -+ * Lux/Ch0 = 0.0392.0.0605*(Ch1/Ch0) -+ * For 0.52 < Ch1/Ch0 <= 0.65 -+ * Lux/Ch0 = 0.0229.0.0291*(Ch1/Ch0) -+ * For 0.65 < Ch1/Ch0 <= 0.80 -+ * Lux/Ch0 = 0.00157.0.00180*(Ch1/Ch0) -+ * For 0.80 < Ch1/Ch0 <= 1.30 -+ * Lux/Ch0 = 0.00338.0.00260*(Ch1/Ch0) -+ * For Ch1/Ch0 > 1.30 -+ * Lux = 0 -+ */ -+#define K1C 0x0043 /* 0.130 * 2^RATIO_SCALE */ -+#define B1C 0x0204 /* 0.0315 * 2^LUX_SCALE */ -+#define M1C 0x01ad /* 0.0262 * 2^LUX_SCALE */ -+#define K2C 0x0085 /* 0.260 * 2^RATIO_SCALE */ -+#define B2C 0x0228 /* 0.0337 * 2^LUX_SCALE */ -+#define M2C 0x02c1 /* 0.0430 * 2^LUX_SCALE */ -+#define K3C 0x00c8 /* 0.390 * 2^RATIO_SCALE */ -+#define B3C 0x0253 /* 0.0363 * 2^LUX_SCALE */ -+#define M3C 0x0363 /* 0.0529 * 2^LUX_SCALE */ -+#define K4C 0x010a /* 0.520 * 2^RATIO_SCALE */ -+#define B4C 0x0282 /* 0.0392 * 2^LUX_SCALE */ -+#define M4C 0x03df /* 0.0605 * 2^LUX_SCALE */ -+#define K5C 0x014d /* 0.65 * 2^RATIO_SCALE */ -+#define B5C 0x0177 /* 0.0229 * 2^LUX_SCALE */ -+#define M5C 0x01dd /* 0.0291 * 2^LUX_SCALE */ -+#define K6C 0x019a /* 0.80 * 2^RATIO_SCALE */ -+#define B6C 0x0101 /* 0.0157 * 2^LUX_SCALE */ -+#define M6C 0x0127 /* 0.0180 * 2^LUX_SCALE */ -+#define K7C 0x029a /* 1.3 * 2^RATIO_SCALE */ -+#define B7C 0x0037 /* 0.00338 * 2^LUX_SCALE */ -+#define M7C 0x002b /* 0.00260 * 2^LUX_SCALE */ -+#define K8C 0x029a /* 1.3 * 2^RATIO_SCALE */ -+#define B8C 0x0000 /* 0.000 * 2^LUX_SCALE */ -+#define M8C 0x0000 /* 0.000 * 2^LUX_SCALE */ -+ -+/* TSL256x registers definition . */ -+enum tsl256x_regs { -+ TSL256X_REG_CONTROL = 0x80, /* Control of basic functions */ -+ TSL256X_REG_TIMING = 0x81, /* Integration time/gain control */ -+ TSL256X_REG_THRESHLOWLOW = 0x82, /* Low byte of low interrupt threshold */ -+ TSL256X_REG_THRESHLOWHIGH = 0x83, /* High byte of low interrupt threshold */ -+ TSL256X_REG_THRESHHIGHLOW = 0x84, /* Low byte of high interrupt threshold */ -+ TSL256X_REG_THRESHHIGHHIGH = 0x85, /* High byte of high interrupt threshold */ -+ TSL256X_REG_INTERRUPT = 0x86, /* Interrupt control */ -+ TSL256X_REG_CRC = 0x88, /* Factory test - not a user register */ -+ TSL256X_REG_ID = 0x8A, /* Part number/ Rev ID */ -+ TSL256X_REG_DATA0LOW = 0x8C, /* Low byte of ADC channel 0 */ -+ TSL256X_REG_DATA0HIGH = 0x8D, /* High byte of ADC channel 0 */ -+ TSL256X_REG_DATA1LOW = 0x8E, /* Low byte of ADC channel 1 */ -+ TSL256X_REG_DATA1HIGH = 0x8F, /* High byte of ADC channel 1 */ -+ __NUM_TSL256X_REGS -+}; -+ -+#endif /* _TSL256X_H */ -+ -Index: linux-2.6.24.7/drivers/i2c/i2c-core.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/i2c/i2c-core.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/i2c/i2c-core.c 2008-12-11 22:46:49.000000000 +0100 -@@ -1,4 +1,3 @@ --/* i2c-core.c - a device driver for the iic-bus interface */ - /* ------------------------------------------------------------------------- */ - /* Copyright (C) 1995-99 Simon G. Vogl - -@@ -136,10 +135,16 @@ static int i2c_device_suspend(struct dev - - if (!dev->driver) - return 0; -+#if 0 - driver = to_i2c_driver(dev->driver); - if (!driver->suspend) - return 0; - return driver->suspend(to_i2c_client(dev), mesg); -+#else -+ if (!dev->driver->suspend) -+ return 0; -+ return dev->driver->suspend(dev, mesg); -+#endif - } - - static int i2c_device_resume(struct device * dev) -@@ -148,10 +153,16 @@ static int i2c_device_resume(struct devi - - if (!dev->driver) - return 0; -+#if 0 - driver = to_i2c_driver(dev->driver); - if (!driver->resume) - return 0; - return driver->resume(to_i2c_client(dev)); -+#else -+ if (!dev->driver->resume) -+ return 0; -+ return dev->driver->resume(dev); -+#endif - } - - static void i2c_client_release(struct device *dev) -@@ -941,11 +952,11 @@ static int i2c_probe_address(struct i2c_ - int err; - - /* Make sure the address is valid */ -- if (addr < 0x03 || addr > 0x77) { -+ /*if (addr < 0x03 || addr > 0x77) { - dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n", - addr); - return -EINVAL; -- } -+ }*/ - - /* Skip if already in use */ - if (i2c_check_addr(adapter, addr)) -Index: linux-2.6.24.7/drivers/input/evdev.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/input/evdev.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/input/evdev.c 2008-12-11 22:46:49.000000000 +0100 -@@ -28,7 +28,7 @@ struct evdev { - char name[16]; - struct input_handle handle; - wait_queue_head_t wait; -- struct evdev_client *grab; -+ int *grab; - struct list_head client_list; - spinlock_t client_lock; /* protects client_list */ - struct mutex mutex; -@@ -39,6 +39,7 @@ struct evdev_client { - struct input_event buffer[EVDEV_BUFFER_SIZE]; - int head; - int tail; -+ int grab; - spinlock_t buffer_lock; /* protects access to buffer, head and tail */ - struct fasync_struct *fasync; - struct evdev *evdev; -@@ -79,12 +80,8 @@ static void evdev_event(struct input_han - - rcu_read_lock(); - -- client = rcu_dereference(evdev->grab); -- if (client) -+ list_for_each_entry_rcu(client, &evdev->client_list, node) - evdev_pass_event(client, &event); -- else -- list_for_each_entry_rcu(client, &evdev->client_list, node) -- evdev_pass_event(client, &event); - - rcu_read_unlock(); - -@@ -135,14 +132,15 @@ static int evdev_grab(struct evdev *evde - { - int error; - -- if (evdev->grab) -+ if (client->grab) - return -EBUSY; - -- error = input_grab_device(&evdev->handle); -- if (error) -- return error; -- -- rcu_assign_pointer(evdev->grab, client); -+ if (!evdev->grab++) { -+ error = input_grab_device(&evdev->handle); -+ if (error) -+ return error; -+ } -+ client->grab = 1; - synchronize_rcu(); - - return 0; -@@ -150,12 +148,12 @@ static int evdev_grab(struct evdev *evde - - static int evdev_ungrab(struct evdev *evdev, struct evdev_client *client) - { -- if (evdev->grab != client) -+ if (!client->grab) - return -EINVAL; - -- rcu_assign_pointer(evdev->grab, NULL); -- synchronize_rcu(); -- input_release_device(&evdev->handle); -+ if (!--evdev->grab && evdev->exist) -+ input_release_device(&evdev->handle); -+ client->grab = 0; - - return 0; - } -@@ -230,7 +228,7 @@ static int evdev_release(struct inode *i - struct evdev *evdev = client->evdev; - - mutex_lock(&evdev->mutex); -- if (evdev->grab == client) -+ if (client->grab) - evdev_ungrab(evdev, client); - mutex_unlock(&evdev->mutex); - -Index: linux-2.6.24.7/drivers/input/keyboard/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/input/keyboard/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/input/keyboard/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -293,4 +293,32 @@ config KEYBOARD_BFIN - To compile this driver as a module, choose M here: the - module will be called bf54x-keys. - -+config KEYBOARD_NEO1973 -+ tristate "FIC Neo1973 buttons" -+ depends on MACH_NEO1973 -+ default y -+ help -+ Say Y here to enable the buttons on the FIC Neo1973 -+ GSM phone. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called neo1973kbd. -+ -+config KEYBOARD_M800 -+ tristate "E-TEN glofiish M800 buttons" -+ depends on MACH_M800 -+ default y -+ help -+ Say Y here to enable the buttons on the E-TEN glofiish -+ M800 GSM phone. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called m800kbd. -+ -+config KEYBOARD_QT2410 -+ tristate "QT2410 buttons" -+ depends on MACH_QT2410 -+ default y -+ -+ - endif -Index: linux-2.6.24.7/drivers/input/keyboard/m800kbd.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/input/keyboard/m800kbd.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,330 @@ -+/* -+ * Keyboard driver for E-TEN M800 GSM phone -+ * -+ * (C) 2008 by Harald Welte -+ * All rights reserved. -+ * -+ * inspired by corkgbd.c by Richard Purdie -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+struct m800kbd { -+ struct input_dev *input; -+ unsigned int suspended; -+ struct work_struct work; -+ int work_in_progress; -+ int hp_irq_count_in_work; -+ int hp_irq_count; -+ int jack_irq; -+}; -+ -+static irqreturn_t m800kbd_power_irq(int irq, void *dev_id) -+{ -+ struct m800kbd *m800kbd_data = dev_id; -+ int key_pressed = !gpio_get_value(irq_to_gpio(irq)); -+ -+ input_report_key(m800kbd_data->input, KEY_POWER, key_pressed); -+ input_sync(m800kbd_data->input); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t m800kbd_cam_irq(int irq, void *dev_id) -+{ -+ struct m800kbd *m800kbd_data = dev_id; -+ -+ int key_pressed = !gpio_get_value(irq_to_gpio(irq)); -+ input_report_key(m800kbd_data->input, KEY_CAMERA, key_pressed); -+ input_sync(m800kbd_data->input); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t m800kbd_rec_irq(int irq, void *dev_id) -+{ -+ struct m800kbd *m800kbd_data = dev_id; -+ -+ int key_pressed = !gpio_get_value(irq_to_gpio(irq)); -+ input_report_key(m800kbd_data->input, KEY_RECORD, key_pressed); -+ input_sync(m800kbd_data->input); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t m800kbd_slide_irq(int irq, void *dev_id) -+{ -+ struct m800kbd *m800kbd_data = dev_id; -+ -+ int key_pressed = gpio_get_value(irq_to_gpio(irq)); -+ input_report_key(m800kbd_data->input, SW_LID, key_pressed); -+ input_sync(m800kbd_data->input); -+ -+ return IRQ_HANDLED; -+} -+ -+#if 0 -+static void m800kbd_debounce_jack(struct work_struct *work) -+{ -+ struct m800kbd *kbd = container_of(work, struct m800kbd, work); -+ unsigned long flags; -+ int loop = 0; -+ -+ do { -+ /* -+ * we wait out any multiple interrupt -+ * stuttering in 100ms lumps -+ */ -+ do { -+ kbd->hp_irq_count_in_work = kbd->hp_irq_count; -+ msleep(100); -+ } while (kbd->hp_irq_count != kbd->hp_irq_count_in_work); -+ /* -+ * no new interrupts on jack for 100ms... -+ * ok we will report it -+ */ -+ input_report_switch(kbd->input, SW_HEADPHONE_INSERT, -+ gpio_get_value(irq_to_gpio(kbd->jack_irq))); -+ input_sync(kbd->input); -+ /* -+ * we go around the outer loop again if we detect that more -+ * interrupts came while we are servicing here. But we have -+ * to sequence it carefully with interrupts off -+ */ -+ local_save_flags(flags); -+ /* no interrupts during this work means we can exit the work */ -+ loop = !!(kbd->hp_irq_count != kbd->hp_irq_count_in_work); -+ if (!loop) -+ kbd->work_in_progress = 0; -+ local_irq_restore(flags); -+ /* -+ * interrupt that comes here will either queue a new work action -+ * since work_in_progress is cleared now, or be dealt with -+ * when we loop. -+ */ -+ } while (loop); -+} -+ -+ -+static irqreturn_t m800kbd_headphone_irq(int irq, void *dev_id) -+{ -+ struct m800kbd *m800kbd_data = dev_id; -+ -+ /* -+ * this interrupt is prone to bouncing and userspace doesn't like -+ * to have to deal with that kind of thing. So we do not accept -+ * that a jack interrupt is equal to a jack event. Instead we fire -+ * some work on the first interrupt, and it hangs about in 100ms units -+ * until no more interrupts come. Then it accepts the state it finds -+ * for jack insert and reports it once -+ */ -+ -+ m800kbd_data->hp_irq_count++; -+ /* -+ * the first interrupt we see for a while, we fire the work item -+ * and record the interrupt count when we did that. If more interrupts -+ * come in the meanwhile, we can tell by the difference in that -+ * stored count and hp_irq_count which increments every interrupt -+ */ -+ if (!m800kbd_data->work_in_progress) { -+ m800kbd_data->jack_irq = irq; -+ m800kbd_data->hp_irq_count_in_work = -+ m800kbd_data->hp_irq_count; -+ if (!schedule_work(&m800kbd_data->work)) -+ printk(KERN_ERR -+ "Unable to schedule headphone debounce\n"); -+ else -+ m800kbd_data->work_in_progress = 1; -+ } -+ -+ return IRQ_HANDLED; -+} -+#endif -+ -+#ifdef CONFIG_PM -+static int m800kbd_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ struct m800kbd *m800kbd = platform_get_drvdata(dev); -+ -+ m800kbd->suspended = 1; -+ -+ return 0; -+} -+ -+static int m800kbd_resume(struct platform_device *dev) -+{ -+ struct m800kbd *m800kbd = platform_get_drvdata(dev); -+ -+ m800kbd->suspended = 0; -+ -+ return 0; -+} -+#else -+#define m800kbd_suspend NULL -+#define m800kbd_resume NULL -+#endif -+ -+static int m800kbd_probe(struct platform_device *pdev) -+{ -+ struct m800kbd *m800kbd; -+ struct input_dev *input_dev; -+ int rc, irq_power, irq_cam, irq_rec, irq_slide; -+ -+ m800kbd = kzalloc(sizeof(struct m800kbd), GFP_KERNEL); -+ input_dev = input_allocate_device(); -+ if (!m800kbd || !input_dev) { -+ kfree(m800kbd); -+ input_free_device(input_dev); -+ return -ENOMEM; -+ } -+ -+ if (pdev->resource[0].flags != 0) -+ return -EINVAL; -+ -+ irq_power = gpio_to_irq(pdev->resource[0].start); -+ if (irq_power < 0) -+ return -EINVAL; -+ -+ irq_cam = gpio_to_irq(pdev->resource[1].start); -+ if (irq_cam < 0) -+ return -EINVAL; -+ -+ irq_rec = gpio_to_irq(pdev->resource[2].start); -+ if (irq_rec < 0) -+ return -EINVAL; -+ -+ irq_slide = gpio_to_irq(pdev->resource[3].start); -+ if (irq_slide < 0) -+ return -EINVAL; -+ -+ platform_set_drvdata(pdev, m800kbd); -+ -+ m800kbd->input = input_dev; -+ -+ //INIT_WORK(&m800kbd->work, m800kbd_debounce_jack); -+ -+ input_dev->name = "M800 Buttons"; -+ input_dev->phys = "m800kbd/input0"; -+ input_dev->id.bustype = BUS_HOST; -+ input_dev->id.vendor = 0x0001; -+ input_dev->id.product = 0x0001; -+ input_dev->id.version = 0x0100; -+ input_dev->cdev.dev = &pdev->dev; -+ input_dev->private = m800kbd; -+ -+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_SW); -+ set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); -+ set_bit(SW_LID, input_dev->swbit); -+ set_bit(KEY_POWER, input_dev->keybit); -+ set_bit(KEY_CAMERA, input_dev->keybit); -+ set_bit(KEY_RECORD, input_dev->keybit); -+ -+ rc = input_register_device(m800kbd->input); -+ if (rc) -+ goto out_register; -+ -+ if (request_irq(irq_power, m800kbd_power_irq, IRQF_DISABLED | -+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -+ "M800 Power button", m800kbd)) { -+ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_power); -+ goto out_aux; -+ } -+ -+ enable_irq_wake(irq_power); -+ -+ if (request_irq(irq_cam, m800kbd_cam_irq, IRQF_DISABLED | -+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -+ "M800 Camera button", m800kbd)) { -+ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_cam); -+ goto out_hold; -+ } -+ -+ if (request_irq(irq_rec, m800kbd_rec_irq, IRQF_DISABLED | -+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -+ "M800 Record button", m800kbd)) { -+ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_rec); -+ goto out_hold; -+ } -+ -+ if (request_irq(irq_slide, m800kbd_slide_irq, IRQF_DISABLED | -+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -+ "M800 Slide", m800kbd)) { -+ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_slide); -+ goto out_jack; -+ } -+ enable_irq_wake(irq_slide); -+ -+ return 0; -+ -+out_jack: -+ free_irq(irq_cam, m800kbd); -+out_hold: -+ free_irq(irq_power, m800kbd); -+out_aux: -+ input_unregister_device(m800kbd->input); -+out_register: -+ input_free_device(m800kbd->input); -+ platform_set_drvdata(pdev, NULL); -+ kfree(m800kbd); -+ -+ return -ENODEV; -+} -+ -+static int m800kbd_remove(struct platform_device *pdev) -+{ -+ struct m800kbd *m800kbd = platform_get_drvdata(pdev); -+ -+ free_irq(gpio_to_irq(pdev->resource[2].start), m800kbd); -+ free_irq(gpio_to_irq(pdev->resource[1].start), m800kbd); -+ free_irq(gpio_to_irq(pdev->resource[0].start), m800kbd); -+ -+ input_unregister_device(m800kbd->input); -+ input_free_device(m800kbd->input); -+ platform_set_drvdata(pdev, NULL); -+ kfree(m800kbd); -+ -+ return 0; -+} -+ -+static struct platform_driver m800kbd_driver = { -+ .probe = m800kbd_probe, -+ .remove = m800kbd_remove, -+ .suspend = m800kbd_suspend, -+ .resume = m800kbd_resume, -+ .driver = { -+ .name = "m800-button", -+ }, -+}; -+ -+static int __devinit m800kbd_init(void) -+{ -+ return platform_driver_register(&m800kbd_driver); -+} -+ -+static void __exit m800kbd_exit(void) -+{ -+ platform_driver_unregister(&m800kbd_driver); -+} -+ -+module_init(m800kbd_init); -+module_exit(m800kbd_exit); -+ -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION("E-TEN glofiish M800 GPIO buttons input driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/input/keyboard/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/input/keyboard/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/input/keyboard/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -14,6 +14,9 @@ obj-$(CONFIG_KEYBOARD_LOCOMO) += locomo - obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o - obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o - obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o -+obj-$(CONFIG_KEYBOARD_NEO1973) += neo1973kbd.o -+obj-$(CONFIG_KEYBOARD_M800) += m800kbd.o -+obj-$(CONFIG_KEYBOARD_QT2410) += qt2410kbd.o - obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o - obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o - obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o -Index: linux-2.6.24.7/drivers/input/keyboard/neo1973kbd.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/input/keyboard/neo1973kbd.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,303 @@ -+/* -+ * Keyboard driver for FIC Neo1973 GSM phone -+ * -+ * (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * inspired by corkgbd.c by Richard Purdie -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+struct neo1973kbd { -+ struct input_dev *input; -+ unsigned int suspended; -+ struct work_struct work; -+ int work_in_progress; -+ int hp_irq_count_in_work; -+ int hp_irq_count; -+ int jack_irq; -+}; -+ -+static irqreturn_t neo1973kbd_aux_irq(int irq, void *dev_id) -+{ -+ struct neo1973kbd *neo1973kbd_data = dev_id; -+ int key_pressed = !gpio_get_value(irq_to_gpio(irq)); -+ -+ /* GTA02 has inverted sense level compared to GTA01 */ -+ if (machine_is_neo1973_gta02()) -+ key_pressed = !key_pressed; -+ input_report_key(neo1973kbd_data->input, KEY_PHONE, key_pressed); -+ input_sync(neo1973kbd_data->input); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t neo1973kbd_hold_irq(int irq, void *dev_id) -+{ -+ struct neo1973kbd *neo1973kbd_data = dev_id; -+ -+ int key_pressed = gpio_get_value(irq_to_gpio(irq)); -+ input_report_key(neo1973kbd_data->input, KEY_PAUSE, key_pressed); -+ input_sync(neo1973kbd_data->input); -+ -+ return IRQ_HANDLED; -+} -+ -+ -+static void neo1973kbd_debounce_jack(struct work_struct *work) -+{ -+ struct neo1973kbd *kbd = container_of(work, struct neo1973kbd, work); -+ unsigned long flags; -+ int loop = 0; -+ -+ do { -+ /* -+ * we wait out any multiple interrupt -+ * stuttering in 100ms lumps -+ */ -+ do { -+ kbd->hp_irq_count_in_work = kbd->hp_irq_count; -+ msleep(100); -+ } while (kbd->hp_irq_count != kbd->hp_irq_count_in_work); -+ /* -+ * no new interrupts on jack for 100ms... -+ * ok we will report it -+ */ -+ input_report_switch(kbd->input, SW_HEADPHONE_INSERT, -+ gpio_get_value(irq_to_gpio(kbd->jack_irq))); -+ input_sync(kbd->input); -+ /* -+ * we go around the outer loop again if we detect that more -+ * interrupts came while we are servicing here. But we have -+ * to sequence it carefully with interrupts off -+ */ -+ local_save_flags(flags); -+ /* no interrupts during this work means we can exit the work */ -+ loop = !!(kbd->hp_irq_count != kbd->hp_irq_count_in_work); -+ if (!loop) -+ kbd->work_in_progress = 0; -+ local_irq_restore(flags); -+ /* -+ * interrupt that comes here will either queue a new work action -+ * since work_in_progress is cleared now, or be dealt with -+ * when we loop. -+ */ -+ } while (loop); -+} -+ -+ -+static irqreturn_t neo1973kbd_headphone_irq(int irq, void *dev_id) -+{ -+ struct neo1973kbd *neo1973kbd_data = dev_id; -+ -+ /* -+ * this interrupt is prone to bouncing and userspace doesn't like -+ * to have to deal with that kind of thing. So we do not accept -+ * that a jack interrupt is equal to a jack event. Instead we fire -+ * some work on the first interrupt, and it hangs about in 100ms units -+ * until no more interrupts come. Then it accepts the state it finds -+ * for jack insert and reports it once -+ */ -+ -+ neo1973kbd_data->hp_irq_count++; -+ /* -+ * the first interrupt we see for a while, we fire the work item -+ * and record the interrupt count when we did that. If more interrupts -+ * come in the meanwhile, we can tell by the difference in that -+ * stored count and hp_irq_count which increments every interrupt -+ */ -+ if (!neo1973kbd_data->work_in_progress) { -+ neo1973kbd_data->jack_irq = irq; -+ neo1973kbd_data->hp_irq_count_in_work = -+ neo1973kbd_data->hp_irq_count; -+ if (!schedule_work(&neo1973kbd_data->work)) -+ printk(KERN_ERR -+ "Unable to schedule headphone debounce\n"); -+ else -+ neo1973kbd_data->work_in_progress = 1; -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+#ifdef CONFIG_PM -+static int neo1973kbd_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ struct neo1973kbd *neo1973kbd = platform_get_drvdata(dev); -+ -+ neo1973kbd->suspended = 1; -+ -+ return 0; -+} -+ -+static int neo1973kbd_resume(struct platform_device *dev) -+{ -+ struct neo1973kbd *neo1973kbd = platform_get_drvdata(dev); -+ -+ neo1973kbd->suspended = 0; -+ -+ return 0; -+} -+#else -+#define neo1973kbd_suspend NULL -+#define neo1973kbd_resume NULL -+#endif -+ -+static int neo1973kbd_probe(struct platform_device *pdev) -+{ -+ struct neo1973kbd *neo1973kbd; -+ struct input_dev *input_dev; -+ int rc, irq_aux, irq_hold, irq_jack; -+ -+ neo1973kbd = kzalloc(sizeof(struct neo1973kbd), GFP_KERNEL); -+ input_dev = input_allocate_device(); -+ if (!neo1973kbd || !input_dev) { -+ kfree(neo1973kbd); -+ input_free_device(input_dev); -+ return -ENOMEM; -+ } -+ -+ if (pdev->resource[0].flags != 0) -+ return -EINVAL; -+ -+ irq_aux = gpio_to_irq(pdev->resource[0].start); -+ if (irq_aux < 0) -+ return -EINVAL; -+ -+ irq_hold = gpio_to_irq(pdev->resource[1].start); -+ if (irq_hold < 0) -+ return -EINVAL; -+ -+ irq_jack = gpio_to_irq(pdev->resource[2].start); -+ if (irq_jack < 0) -+ return -EINVAL; -+ -+ platform_set_drvdata(pdev, neo1973kbd); -+ -+ neo1973kbd->input = input_dev; -+ -+ INIT_WORK(&neo1973kbd->work, neo1973kbd_debounce_jack); -+ -+ input_dev->name = "Neo1973 Buttons"; -+ input_dev->phys = "neo1973kbd/input0"; -+ input_dev->id.bustype = BUS_HOST; -+ input_dev->id.vendor = 0x0001; -+ input_dev->id.product = 0x0001; -+ input_dev->id.version = 0x0100; -+ input_dev->cdev.dev = &pdev->dev; -+ input_dev->private = neo1973kbd; -+ -+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_SW); -+ set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); -+ set_bit(KEY_PHONE, input_dev->keybit); -+ set_bit(KEY_PAUSE, input_dev->keybit); -+ -+ rc = input_register_device(neo1973kbd->input); -+ if (rc) -+ goto out_register; -+ -+ if (request_irq(irq_aux, neo1973kbd_aux_irq, IRQF_DISABLED | -+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -+ "Neo1973 AUX button", neo1973kbd)) { -+ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_aux); -+ goto out_aux; -+ } -+ -+ /* -+ * GTA01 revisions before Bv4 can't be resumed by the PMU, so we use -+ * resume by AUX. -+ */ -+ if (machine_is_neo1973_gta01()) -+ enable_irq_wake(irq_aux); -+ -+ if (request_irq(irq_hold, neo1973kbd_hold_irq, IRQF_DISABLED | -+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -+ "Neo1973 HOLD button", neo1973kbd)) { -+ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_hold); -+ goto out_hold; -+ } -+ -+ if (request_irq(irq_jack, neo1973kbd_headphone_irq, IRQF_DISABLED | -+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -+ "Neo1973 Headphone Jack", neo1973kbd)) { -+ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_jack); -+ goto out_jack; -+ } -+ enable_irq_wake(irq_jack); -+ -+ return 0; -+ -+out_jack: -+ free_irq(irq_hold, neo1973kbd); -+out_hold: -+ free_irq(irq_aux, neo1973kbd); -+out_aux: -+ input_unregister_device(neo1973kbd->input); -+out_register: -+ input_free_device(neo1973kbd->input); -+ platform_set_drvdata(pdev, NULL); -+ kfree(neo1973kbd); -+ -+ return -ENODEV; -+} -+ -+static int neo1973kbd_remove(struct platform_device *pdev) -+{ -+ struct neo1973kbd *neo1973kbd = platform_get_drvdata(pdev); -+ -+ free_irq(gpio_to_irq(pdev->resource[2].start), neo1973kbd); -+ free_irq(gpio_to_irq(pdev->resource[1].start), neo1973kbd); -+ free_irq(gpio_to_irq(pdev->resource[0].start), neo1973kbd); -+ -+ input_unregister_device(neo1973kbd->input); -+ input_free_device(neo1973kbd->input); -+ platform_set_drvdata(pdev, NULL); -+ kfree(neo1973kbd); -+ -+ return 0; -+} -+ -+static struct platform_driver neo1973kbd_driver = { -+ .probe = neo1973kbd_probe, -+ .remove = neo1973kbd_remove, -+ .suspend = neo1973kbd_suspend, -+ .resume = neo1973kbd_resume, -+ .driver = { -+ .name = "neo1973-button", -+ }, -+}; -+ -+static int __devinit neo1973kbd_init(void) -+{ -+ return platform_driver_register(&neo1973kbd_driver); -+} -+ -+static void __exit neo1973kbd_exit(void) -+{ -+ platform_driver_unregister(&neo1973kbd_driver); -+} -+ -+module_init(neo1973kbd_init); -+module_exit(neo1973kbd_exit); -+ -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION("FIC Neo1973 buttons input driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/input/keyboard/qt2410kbd.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/input/keyboard/qt2410kbd.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,233 @@ -+/* -+ * Keyboard driver for Armzone QT2410 -+ * -+ * (C) 2006 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+struct gta01kbd { -+ struct input_dev *input; -+ unsigned int suspended; -+ unsigned long suspend_jiffies; -+}; -+ -+static irqreturn_t gta01kbd_interrupt(int irq, void *dev_id) -+{ -+ struct gta01kbd *gta01kbd_data = dev_id; -+ -+ /* FIXME: use GPIO from platform_dev resources */ -+ if (s3c2410_gpio_getpin(S3C2410_GPF0)) -+ input_report_key(gta01kbd_data->input, KEY_PHONE, 1); -+ else -+ input_report_key(gta01kbd_data->input, KEY_PHONE, 0); -+ -+ input_sync(gta01kbd_data->input); -+ -+ return IRQ_HANDLED; -+} -+ -+ -+#ifdef CONFIG_PM -+static int gta01kbd_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ struct gta01kbd *gta01kbd = platform_get_drvdata(dev); -+ -+ gta01kbd->suspended = 1; -+ -+ return 0; -+} -+ -+static int gta01kbd_resume(struct platform_device *dev) -+{ -+ struct gta01kbd *gta01kbd = platform_get_drvdata(dev); -+ -+ gta01kbd->suspended = 0; -+ -+ return 0; -+} -+#else -+#define gta01kbd_suspend NULL -+#define gta01kbd_resume NULL -+#endif -+ -+static int gta01kbd_probe(struct platform_device *pdev) -+{ -+ struct gta01kbd *gta01kbd; -+ struct input_dev *input_dev; -+ int irq_911; -+ int rc = 0; -+ -+ gta01kbd = kzalloc(sizeof(struct gta01kbd), GFP_KERNEL); -+ if (!gta01kbd) { -+ rc = -ENOMEM; -+ goto bail; -+ } -+ input_dev = input_allocate_device(); -+ if (!gta01kbd || !input_dev) { -+ rc = -ENOMEM; -+ goto bail_free; -+ } -+ -+ if (pdev->resource[0].flags != 0) {\ -+ rc = -EINVAL; -+ goto bail_free_dev; -+ } -+ -+ irq_911 = s3c2410_gpio_getirq(pdev->resource[0].start); -+ if (irq_911 < 0) { -+ rc = -EINVAL; -+ goto bail_free_dev; -+ } -+ -+ platform_set_drvdata(pdev, gta01kbd); -+ -+ gta01kbd->input = input_dev; -+ -+#if 0 -+ spin_lock_init(>a01kbd->lock); -+ /* Init Keyboard rescan timer */ -+ init_timer(&corgikbd->timer); -+ corgikbd->timer.function = corgikbd_timer_callback; -+ corgikbd->timer.data = (unsigned long) corgikbd; -+ -+ /* Init Hinge Timer */ -+ init_timer(&corgikbd->htimer); -+ corgikbd->htimer.function = corgikbd_hinge_timer; -+ corgikbd->htimer.data = (unsigned long) corgikbd; -+ -+ corgikbd->suspend_jiffies=jiffies; -+ -+ memcpy(corgikbd->keycode, corgikbd_keycode, sizeof(corgikbd->keycode)); -+#endif -+ -+ input_dev->name = "QT2410 Buttons"; -+ input_dev->phys = "qt2410kbd/input0"; -+ input_dev->id.bustype = BUS_HOST; -+ input_dev->id.vendor = 0x0001; -+ input_dev->id.product = 0x0001; -+ input_dev->id.version = 0x0100; -+ input_dev->cdev.dev = &pdev->dev; -+ input_dev->private = gta01kbd; -+ -+ input_dev->evbit[0] = BIT(EV_KEY); -+#if 0 -+ input_dev->keycode = gta01kbd->keycode; -+ input_dev->keycodesize = sizeof(unsigned char); -+ input_dev->keycodemax = ARRAY_SIZE(corgikbd_keycode); -+ -+ for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++) -+ set_bit(corgikbd->keycode[i], input_dev->keybit); -+ clear_bit(0, input_dev->keybit); -+ set_bit(SW_LID, input_dev->swbit); -+ set_bit(SW_TABLET_MODE, input_dev->swbit); -+ set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); -+#endif -+ -+ rc = input_register_device(gta01kbd->input); -+ if (rc) -+ goto bail_free_dev; -+ -+ s3c2410_gpio_cfgpin(S3C2410_GPF0, S3C2410_GPF0_EINT0); -+ if (request_irq(irq_911, gta01kbd_interrupt, -+ IRQF_DISABLED | IRQF_TRIGGER_RISING | -+ IRQF_TRIGGER_FALLING, "qt2410kbd_eint0", gta01kbd)) -+ printk(KERN_WARNING "gta01kbd: Can't get IRQ\n"); -+ enable_irq_wake(irq_911); -+ -+ /* FIXME: headphone insert */ -+ -+#if 0 -+ mod_timer(&corgikbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); -+ -+ /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ -+ for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) { -+ pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN); -+ if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt, -+ SA_INTERRUPT | SA_TRIGGER_RISING, -+ "corgikbd", corgikbd)) -+ printk(KERN_WARNING "corgikbd: Can't get IRQ: %d!\n", i); -+ } -+ -+ /* Set Strobe lines as outputs - set high */ -+ for (i = 0; i < CORGI_KEY_STROBE_NUM; i++) -+ pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); -+ -+ /* Setup the headphone jack as an input */ -+ pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN); -+#endif -+ -+ return 0; -+ -+bail_free_dev: -+ input_free_device(input_dev); -+bail_free: -+ kfree(gta01kbd); -+bail: -+ return rc; -+} -+ -+static int gta01kbd_remove(struct platform_device *pdev) -+{ -+ struct gta01kbd *gta01kbd = platform_get_drvdata(pdev); -+ -+ free_irq(s3c2410_gpio_getirq(pdev->resource[0].start), gta01kbd); -+#if 0 -+ int i; -+ -+ for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) -+ free_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd); -+ -+ del_timer_sync(&corgikbd->htimer); -+ del_timer_sync(&corgikbd->timer); -+#endif -+ input_unregister_device(gta01kbd->input); -+ -+ kfree(gta01kbd); -+ -+ return 0; -+} -+ -+static struct platform_driver gta01kbd_driver = { -+ .probe = gta01kbd_probe, -+ .remove = gta01kbd_remove, -+ .suspend = gta01kbd_suspend, -+ .resume = gta01kbd_resume, -+ .driver = { -+ .name = "qt2410-button", -+ }, -+}; -+ -+static int __devinit gta01kbd_init(void) -+{ -+ return platform_driver_register(>a01kbd_driver); -+} -+ -+static void __exit gta01kbd_exit(void) -+{ -+ platform_driver_unregister(>a01kbd_driver); -+} -+ -+module_init(gta01kbd_init); -+module_exit(gta01kbd_exit); -+ -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION("Armzone QT2410 Buttons Driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/input/misc/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/input/misc/Kconfig 2008-12-11 22:46:09.000000000 +0100 -+++ linux-2.6.24.7/drivers/input/misc/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -199,4 +199,13 @@ config INPUT_GPIO_BUTTONS - To compile this driver as a module, choose M here: the - module will be called gpio-buttons. - -+config INPUT_LIS302DL -+ tristate "STmicro LIS302DL 3-axis accelerometer" -+ depends on SPI_MASTER -+ help -+ SPI driver for the STmicro LIS302DL 3-axis accelerometer. -+ -+ The userspece interface is a 3-axis (X/Y/Z) relative movement -+ Linux input device, reporting REL_[XYZ] events. -+ - endif -Index: linux-2.6.24.7/drivers/input/misc/lis302dl.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/input/misc/lis302dl.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,863 @@ -+/* Linux kernel driver for the ST LIS302D 3-axis accelerometer -+ * -+ * Copyright (C) 2007-2008 by Openmoko, Inc. -+ * Author: Harald Welte -+ * converted to private bitbang by: -+ * Andy Green -+ * ability to set acceleration threshold added by: -+ * Simon Kagstrom -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ * TODO -+ * * statistics for overflow events -+ * * configuration interface (sysfs) for -+ * * enable/disable x/y/z axis data ready -+ * * enable/disable resume from freee fall / click -+ * * free fall / click parameters -+ * * high pass filter parameters -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* Utility functions */ -+ -+static u8 __reg_read(struct lis302dl_info *lis, u8 reg) -+{ -+ return (lis->pdata->lis302dl_bitbang_reg_read)(lis, reg); -+} -+ -+static void __reg_write(struct lis302dl_info *lis, u8 reg, u8 val) -+{ -+ (lis->pdata->lis302dl_bitbang_reg_write)(lis, reg, val); -+} -+ -+static void __reg_set_bit_mask(struct lis302dl_info *lis, u8 reg, u8 mask, -+ u8 val) -+{ -+ u_int8_t tmp; -+ -+ val &= mask; -+ -+ tmp = __reg_read(lis, reg); -+ tmp &= ~mask; -+ tmp |= val; -+ __reg_write(lis, reg, tmp); -+} -+ -+static int __ms_to_duration(struct lis302dl_info *lis, int ms) -+{ -+ /* If we have 400 ms sampling rate, the stepping is 2.5 ms, -+ * on 100 ms the stepping is 10ms */ -+ if (lis->flags & LIS302DL_F_DR) -+ return min((ms * 10) / 25, 637); -+ -+ return min(ms / 10, 2550); -+} -+ -+static int __duration_to_ms(struct lis302dl_info *lis, int duration) -+{ -+ if (lis->flags & LIS302DL_F_DR) -+ return (duration * 25) / 10; -+ -+ return duration * 10; -+} -+ -+static u8 __mg_to_threshold(struct lis302dl_info *lis, int mg) -+{ -+ /* If FS is set each bit is 71mg, otherwise 18mg. The THS register -+ * has 7 bits for the threshold value */ -+ if (lis->flags & LIS302DL_F_FS) -+ return min(mg / 71, 127); -+ -+ return min(mg / 18, 127); -+} -+ -+static int __threshold_to_mg(struct lis302dl_info *lis, u8 threshold) -+{ -+ if (lis->flags & LIS302DL_F_FS) -+ return threshold * 71; -+ -+ return threshold * 18; -+} -+ -+/* interrupt handling related */ -+ -+enum lis302dl_intmode { -+ LIS302DL_INTMODE_GND = 0x00, -+ LIS302DL_INTMODE_FF_WU_1 = 0x01, -+ LIS302DL_INTMODE_FF_WU_2 = 0x02, -+ LIS302DL_INTMODE_FF_WU_12 = 0x03, -+ LIS302DL_INTMODE_DATA_READY = 0x04, -+ LIS302DL_INTMODE_CLICK = 0x07, -+}; -+ -+ -+static void __lis302dl_int_mode(struct device *dev, int int_pin, -+ enum lis302dl_intmode mode) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ -+ switch (int_pin) { -+ case 1: -+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x07, mode); -+ break; -+ case 2: -+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x38, mode << 3); -+ break; -+ default: -+ BUG(); -+ } -+} -+ -+static void __enable_wakeup(struct lis302dl_info *lis) -+{ -+ /* First zero to get to a known state */ -+ __reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, -+ lis->wakeup.cfg); -+ __reg_write(lis, LIS302DL_REG_FF_WU_THS_1, -+ lis->wakeup.threshold); -+ __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, -+ lis->wakeup.duration); -+ -+ /* Route the interrupt for wakeup */ -+ __lis302dl_int_mode(lis->dev, 1, -+ LIS302DL_INTMODE_FF_WU_1); -+ -+ __reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD); -+} -+ -+static void __enable_data_collection(struct lis302dl_info *lis) -+{ -+ u_int8_t ctrl1 = LIS302DL_CTRL1_PD | LIS302DL_CTRL1_Xen | -+ LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen; -+ -+ /* make sure we're powered up and generate data ready */ -+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, ctrl1); -+ -+ /* If the threshold is zero, let the device generated an interrupt -+ * on each datum */ -+ if (lis->threshold == 0) { -+ __reg_write(lis, LIS302DL_REG_CTRL2, 0); -+ __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_DATA_READY); -+ __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_DATA_READY); -+ } else { -+ __reg_write(lis, LIS302DL_REG_CTRL2, -+ LIS302DL_CTRL2_HPFF1); -+ __reg_write(lis, LIS302DL_REG_FF_WU_THS_1, lis->threshold); -+ __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, lis->duration); -+ -+ /* Clear the HP filter "starting point" */ -+ __reg_read(lis, LIS302DL_REG_HP_FILTER_RESET); -+ __reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, -+ LIS302DL_FFWUCFG_XHIE | LIS302DL_FFWUCFG_YHIE | -+ LIS302DL_FFWUCFG_ZHIE); -+ __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_FF_WU_12); -+ __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_FF_WU_12); -+ } -+} -+ -+#if 0 -+static void _report_btn_single(struct input_dev *inp, int btn) -+{ -+ input_report_key(inp, btn, 1); -+ input_sync(inp); -+ input_report_key(inp, btn, 0); -+} -+ -+static void _report_btn_double(struct input_dev *inp, int btn) -+{ -+ input_report_key(inp, btn, 1); -+ input_sync(inp); -+ input_report_key(inp, btn, 0); -+ input_sync(inp); -+ input_report_key(inp, btn, 1); -+ input_sync(inp); -+ input_report_key(inp, btn, 0); -+} -+#endif -+ -+ -+static void lis302dl_bitbang_read_sample(struct lis302dl_info *lis) -+{ -+ u8 data = 0xc0 | LIS302DL_REG_OUT_X; /* read, autoincrement */ -+ u8 read[5]; -+ unsigned long flags; -+ int mg_per_sample; -+ -+ local_irq_save(flags); -+ mg_per_sample = __threshold_to_mg(lis, 1); -+ -+ (lis->pdata->lis302dl_bitbang)(lis, &data, 1, &read[0], 5); -+ -+ local_irq_restore(flags); -+ -+ input_report_rel(lis->input_dev, REL_X, mg_per_sample * (s8)read[0]); -+ input_report_rel(lis->input_dev, REL_Y, mg_per_sample * (s8)read[2]); -+ input_report_rel(lis->input_dev, REL_Z, mg_per_sample * (s8)read[4]); -+ -+ input_sync(lis->input_dev); -+ -+ /* Reset the HP filter */ -+ __reg_read(lis, LIS302DL_REG_HP_FILTER_RESET); -+} -+ -+static irqreturn_t lis302dl_interrupt(int irq, void *_lis) -+{ -+ struct lis302dl_info *lis = _lis; -+ -+ lis302dl_bitbang_read_sample(lis); -+ return IRQ_HANDLED; -+} -+ -+/* sysfs */ -+ -+static ssize_t show_rate(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ u8 ctrl1; -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1); -+ local_irq_restore(flags); -+ -+ return sprintf(buf, "%d\n", ctrl1 & LIS302DL_CTRL1_DR ? 400 : 100); -+} -+ -+static ssize_t set_rate(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ unsigned long flags; -+ int duration_ms = __duration_to_ms(lis, lis->duration); -+ -+ local_irq_save(flags); -+ -+ if (!strcmp(buf, "400\n")) { -+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR, -+ LIS302DL_CTRL1_DR); -+ lis->flags |= LIS302DL_F_DR; -+ } else { -+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR, -+ 0); -+ lis->flags &= ~LIS302DL_F_DR; -+ } -+ lis->duration = __ms_to_duration(lis, duration_ms); -+ local_irq_restore(flags); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(sample_rate, S_IRUGO | S_IWUSR, show_rate, set_rate); -+ -+static ssize_t show_scale(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ u_int8_t ctrl1; -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1); -+ local_irq_restore(flags); -+ -+ return sprintf(buf, "%s\n", ctrl1 & LIS302DL_CTRL1_FS ? "9.2" : "2.3"); -+} -+ -+static ssize_t set_scale(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ unsigned long flags; -+ int threshold_mg = __threshold_to_mg(lis, lis->threshold); -+ -+ local_irq_save(flags); -+ -+ if (!strcmp(buf, "9.2\n")) { -+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS, -+ LIS302DL_CTRL1_FS); -+ lis->flags |= LIS302DL_F_FS; -+ } else { -+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS, -+ 0); -+ lis->flags &= ~LIS302DL_F_FS; -+ } -+ -+ /* Adjust the threshold */ -+ lis->threshold = __mg_to_threshold(lis, threshold_mg); -+ if (lis->flags & LIS302DL_F_INPUT_OPEN) -+ __enable_data_collection(lis); -+ -+ local_irq_restore(flags); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale); -+ -+static ssize_t show_threshold(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ -+ return sprintf(buf, "%d\n", __threshold_to_mg(lis, lis->threshold)); -+} -+ -+static ssize_t set_threshold(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ u32 val; -+ -+ if (sscanf(buf, "%d\n", &val) != 1) -+ return -EINVAL; -+ /* 8g is the maximum if FS is 1 */ -+ if (val < 0 || val > 8000) -+ return -ERANGE; -+ -+ /* Set the threshold and write it out if the device is used */ -+ lis->threshold = __mg_to_threshold(lis, val); -+ -+ if (lis->flags & LIS302DL_F_INPUT_OPEN) { -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ __enable_data_collection(lis); -+ local_irq_restore(flags); -+ } -+ -+ return count; -+} -+ -+static DEVICE_ATTR(threshold, S_IRUGO | S_IWUSR, show_threshold, set_threshold); -+ -+static ssize_t show_duration(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ -+ return sprintf(buf, "%d\n", __duration_to_ms(lis, lis->duration)); -+} -+ -+static ssize_t set_duration(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ u32 val; -+ -+ if (sscanf(buf, "%d\n", &val) != 1) -+ return -EINVAL; -+ if (val < 0 || val > 2550) -+ return -ERANGE; -+ -+ lis->duration = __ms_to_duration(lis, val); -+ if (lis->flags & LIS302DL_F_INPUT_OPEN) -+ __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, lis->duration); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(duration, S_IRUGO | S_IWUSR, show_duration, set_duration); -+ -+static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ int n = 0; -+ u8 reg[0x40]; -+ char *end = buf; -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ for (n = 0; n < sizeof(reg); n++) -+ reg[n] = __reg_read(lis, n); -+ -+ local_irq_restore(flags); -+ -+ for (n = 0; n < sizeof(reg); n += 16) { -+ hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0); -+ end += strlen(end); -+ *end++ = '\n'; -+ *end++ = '\0'; -+ } -+ -+ return end - buf; -+} -+static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL); -+ -+/* Configure freefall/wakeup interrupts */ -+static ssize_t set_wakeup(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ u_int8_t x_lo, y_lo, z_lo; -+ u_int8_t x_hi, y_hi, z_hi; -+ int duration, threshold, and_events; -+ int x, y, z; -+ -+ /* Zero turns the feature off */ -+ if (strcmp(buf, "0\n") == 0) { -+ lis->wakeup.active = 0; -+ -+ if (lis->flags & LIS302DL_F_IRQ_WAKE) { -+ disable_irq_wake(lis->pdata->interrupt); -+ lis->flags &= ~LIS302DL_F_IRQ_WAKE; -+ } -+ -+ return count; -+ } -+ -+ if (sscanf(buf, "%d %d %d %d %d %d", &x, &y, &z, &threshold, &duration, -+ &and_events) != 6) -+ return -EINVAL; -+ -+ if (duration < 0 || duration > 2550 || -+ threshold < 0 || threshold > 8000) -+ return -ERANGE; -+ -+ /* Interrupt flags */ -+ x_lo = x < 0 ? LIS302DL_FFWUCFG_XLIE : 0; -+ y_lo = y < 0 ? LIS302DL_FFWUCFG_YLIE : 0; -+ z_lo = z < 0 ? LIS302DL_FFWUCFG_ZLIE : 0; -+ x_hi = x > 0 ? LIS302DL_FFWUCFG_XHIE : 0; -+ y_hi = y > 0 ? LIS302DL_FFWUCFG_YHIE : 0; -+ z_hi = z > 0 ? LIS302DL_FFWUCFG_ZHIE : 0; -+ -+ lis->wakeup.duration = __ms_to_duration(lis, duration); -+ lis->wakeup.threshold = __mg_to_threshold(lis, threshold); -+ lis->wakeup.cfg = (and_events ? LIS302DL_FFWUCFG_AOI : 0) | -+ x_lo | x_hi | y_lo | y_hi | z_lo | z_hi; -+ -+ if (!(lis->flags & LIS302DL_F_IRQ_WAKE)) { -+ enable_irq_wake(lis->pdata->interrupt); -+ lis->flags |= LIS302DL_F_IRQ_WAKE; -+ } -+ lis->wakeup.active = 1; -+ -+ return count; -+} -+ -+static ssize_t show_wakeup(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(dev); -+ u8 config; -+ -+ /* All events off? */ -+ if (!lis->wakeup.active) -+ return sprintf(buf, "off\n"); -+ -+ config = lis->wakeup.cfg; -+ -+ return sprintf(buf, -+ "%s events, duration %d, threshold %d, " -+ "enabled: %s %s %s %s %s %s\n", -+ (config & LIS302DL_FFWUCFG_AOI) == 0 ? "or" : "and", -+ __duration_to_ms(lis, lis->wakeup.duration), -+ __threshold_to_mg(lis, lis->wakeup.threshold), -+ (config & LIS302DL_FFWUCFG_XLIE) == 0 ? "---" : "xlo", -+ (config & LIS302DL_FFWUCFG_XHIE) == 0 ? "---" : "xhi", -+ (config & LIS302DL_FFWUCFG_YLIE) == 0 ? "---" : "ylo", -+ (config & LIS302DL_FFWUCFG_YHIE) == 0 ? "---" : "yhi", -+ (config & LIS302DL_FFWUCFG_ZLIE) == 0 ? "---" : "zlo", -+ (config & LIS302DL_FFWUCFG_ZHIE) == 0 ? "---" : "zhi"); -+} -+ -+static DEVICE_ATTR(wakeup, S_IRUGO | S_IWUSR, show_wakeup, set_wakeup); -+ -+static struct attribute *lis302dl_sysfs_entries[] = { -+ &dev_attr_sample_rate.attr, -+ &dev_attr_full_scale.attr, -+ &dev_attr_threshold.attr, -+ &dev_attr_duration.attr, -+ &dev_attr_dump.attr, -+ &dev_attr_wakeup.attr, -+ NULL -+}; -+ -+static struct attribute_group lis302dl_attr_group = { -+ .name = NULL, -+ .attrs = lis302dl_sysfs_entries, -+}; -+ -+/* input device handling and driver core interaction */ -+static int lis302dl_input_open(struct input_dev *inp) -+{ -+ struct lis302dl_info *lis = inp->private; -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ __enable_data_collection(lis); -+ lis->flags |= LIS302DL_F_INPUT_OPEN; -+ -+ /* kick it off -- since we are edge triggered, if we missed the edge -+ * permanent low interrupt is death for us */ -+ lis302dl_bitbang_read_sample(lis); -+ -+ local_irq_restore(flags); -+ -+ return 0; -+} -+ -+static void lis302dl_input_close(struct input_dev *inp) -+{ -+ struct lis302dl_info *lis = inp->private; -+ u_int8_t ctrl1 = LIS302DL_CTRL1_Xen | LIS302DL_CTRL1_Yen | -+ LIS302DL_CTRL1_Zen; -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ /* since the input core already serializes access and makes sure we -+ * only see close() for the close of the last user, we can safely -+ * disable the data ready events */ -+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, 0x00); -+ lis->flags &= ~LIS302DL_F_INPUT_OPEN; -+ -+ /* however, don't power down the whole device if still needed */ -+ if (!(lis->flags & LIS302DL_F_WUP_FF || -+ lis->flags & LIS302DL_F_WUP_CLICK)) { -+ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD, -+ 0x00); -+ } -+ local_irq_restore(flags); -+} -+ -+/* get the device to reload its coefficients from EEPROM and wait for it -+ * to complete -+ */ -+ -+static int __lis302dl_reset_device(struct lis302dl_info *lis) -+{ -+ int timeout = 10; -+ -+ __reg_write(lis, LIS302DL_REG_CTRL2, -+ LIS302DL_CTRL2_BOOT | LIS302DL_CTRL2_FDS); -+ -+ while ((__reg_read(lis, LIS302DL_REG_CTRL2) -+ & LIS302DL_CTRL2_BOOT) && (timeout--)) -+ mdelay(1); -+ -+ return !!(timeout < 0); -+} -+ -+static int __devinit lis302dl_probe(struct platform_device *pdev) -+{ -+ int rc; -+ struct lis302dl_info *lis; -+ u_int8_t wai; -+ unsigned long flags; -+ struct lis302dl_platform_data *pdata = pdev->dev.platform_data; -+ -+ lis = kzalloc(sizeof(*lis), GFP_KERNEL); -+ if (!lis) -+ return -ENOMEM; -+ -+ local_irq_save(flags); -+ -+ lis->dev = &pdev->dev; -+ -+ dev_set_drvdata(lis->dev, lis); -+ -+ lis->pdata = pdata; -+ -+ /* Configure our IO */ -+ (lis->pdata->lis302dl_suspend_io)(lis, 1); -+ -+ wai = __reg_read(lis, LIS302DL_REG_WHO_AM_I); -+ if (wai != LIS302DL_WHO_AM_I_MAGIC) { -+ dev_err(lis->dev, "unknown who_am_i signature 0x%02x\n", wai); -+ dev_set_drvdata(lis->dev, NULL); -+ rc = -ENODEV; -+ goto bail_free_lis; -+ } -+ -+ rc = sysfs_create_group(&lis->dev->kobj, &lis302dl_attr_group); -+ if (rc) { -+ dev_err(lis->dev, "error creating sysfs group\n"); -+ goto bail_free_lis; -+ } -+ -+ /* initialize input layer details */ -+ lis->input_dev = input_allocate_device(); -+ if (!lis->input_dev) { -+ dev_err(lis->dev, "Unable to allocate input device\n"); -+ goto bail_sysfs; -+ } -+ -+ set_bit(EV_REL, lis->input_dev->evbit); -+ set_bit(REL_X, lis->input_dev->relbit); -+ set_bit(REL_Y, lis->input_dev->relbit); -+ set_bit(REL_Z, lis->input_dev->relbit); -+/* set_bit(EV_KEY, lis->input_dev->evbit); -+ set_bit(BTN_X, lis->input_dev->keybit); -+ set_bit(BTN_Y, lis->input_dev->keybit); -+ set_bit(BTN_Z, lis->input_dev->keybit); -+*/ -+ lis->threshold = 1; -+ lis->duration = 0; -+ memset(&lis->wakeup, 0, sizeof(lis->wakeup)); -+ -+ lis->input_dev->private = lis; -+ lis->input_dev->name = pdata->name; -+ /* SPI Bus not defined as a valid bus for input subsystem*/ -+ lis->input_dev->id.bustype = BUS_I2C; /* lie about it */ -+ lis->input_dev->open = lis302dl_input_open; -+ lis->input_dev->close = lis302dl_input_close; -+ -+ rc = input_register_device(lis->input_dev); -+ if (rc) { -+ dev_err(lis->dev, "error %d registering input device\n", rc); -+ goto bail_inp_dev; -+ } -+ -+ if (__lis302dl_reset_device(lis)) -+ dev_err(lis->dev, "device BOOT reload failed\n"); -+ -+ /* force us powered */ -+ __reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD | -+ LIS302DL_CTRL1_Xen | -+ LIS302DL_CTRL1_Yen | -+ LIS302DL_CTRL1_Zen); -+ mdelay(1); -+ -+ __reg_write(lis, LIS302DL_REG_CTRL2, 0); -+ __reg_write(lis, LIS302DL_REG_CTRL3, -+ LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL); -+ __reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x0); -+ __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00); -+ __reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x0); -+ -+ /* start off in powered down mode; we power up when someone opens us */ -+ __reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen | -+ LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen); -+ -+ if (pdata->open_drain) -+ /* switch interrupt to open collector, active-low */ -+ __reg_write(lis, LIS302DL_REG_CTRL3, -+ LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL); -+ else -+ /* push-pull, active-low */ -+ __reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_IHL); -+ -+ __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_GND); -+ __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_GND); -+ -+ __reg_read(lis, LIS302DL_REG_STATUS); -+ __reg_read(lis, LIS302DL_REG_FF_WU_SRC_1); -+ __reg_read(lis, LIS302DL_REG_FF_WU_SRC_2); -+ __reg_read(lis, LIS302DL_REG_CLICK_SRC); -+ -+ dev_info(lis->dev, "Found %s\n", pdata->name); -+ -+ lis->pdata = pdata; -+ -+ rc = request_irq(pdata->interrupt, lis302dl_interrupt, -+ IRQF_TRIGGER_FALLING, "lis302dl", lis); -+ if (rc < 0) { -+ dev_err(lis->dev, "error requesting IRQ %d\n", -+ lis->pdata->interrupt); -+ goto bail_inp_reg; -+ } -+ local_irq_restore(flags); -+ return 0; -+ -+bail_inp_reg: -+ input_unregister_device(lis->input_dev); -+bail_inp_dev: -+ input_free_device(lis->input_dev); -+bail_sysfs: -+ sysfs_remove_group(&lis->dev->kobj, &lis302dl_attr_group); -+bail_free_lis: -+ kfree(lis); -+ local_irq_restore(flags); -+ return rc; -+} -+ -+static int __devexit lis302dl_remove(struct platform_device *pdev) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(&pdev->dev); -+ unsigned long flags; -+ -+ /* Reset and power down the device */ -+ local_irq_save(flags); -+ __reg_write(lis, LIS302DL_REG_CTRL3, 0x00); -+ __reg_write(lis, LIS302DL_REG_CTRL2, 0x00); -+ __reg_write(lis, LIS302DL_REG_CTRL1, 0x00); -+ local_irq_restore(flags); -+ -+ /* Cleanup resources */ -+ free_irq(lis->pdata->interrupt, lis); -+ sysfs_remove_group(&pdev->dev.kobj, &lis302dl_attr_group); -+ input_unregister_device(lis->input_dev); -+ if (lis->input_dev) -+ input_free_device(lis->input_dev); -+ dev_set_drvdata(lis->dev, NULL); -+ kfree(lis); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+ -+static u8 regs_to_save[] = { -+ LIS302DL_REG_CTRL1, -+ LIS302DL_REG_CTRL2, -+ LIS302DL_REG_CTRL3, -+ LIS302DL_REG_FF_WU_CFG_1, -+ LIS302DL_REG_FF_WU_THS_1, -+ LIS302DL_REG_FF_WU_DURATION_1, -+ LIS302DL_REG_FF_WU_CFG_2, -+ LIS302DL_REG_FF_WU_THS_2, -+ LIS302DL_REG_FF_WU_DURATION_2, -+ LIS302DL_REG_CLICK_CFG, -+ LIS302DL_REG_CLICK_THSY_X, -+ LIS302DL_REG_CLICK_THSZ, -+ LIS302DL_REG_CLICK_TIME_LIMIT, -+ LIS302DL_REG_CLICK_LATENCY, -+ LIS302DL_REG_CLICK_WINDOW, -+ -+}; -+ -+static int lis302dl_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(&pdev->dev); -+ unsigned long flags; -+ u_int8_t tmp; -+ int n; -+ -+ /* determine if we want to wake up from the accel. */ -+ if (lis->flags & LIS302DL_F_WUP_CLICK) -+ return 0; -+ -+ disable_irq(lis->pdata->interrupt); -+ local_irq_save(flags); -+ -+ /* -+ * When we share SPI over multiple sensors, there is a race here -+ * that one or more sensors will lose. In that case, the shared -+ * SPI bus GPIO will be in sleep mode and partially pulled down. So -+ * we explicitly put our IO into "wake" mode here before the final -+ * traffic to the sensor. -+ */ -+ (lis->pdata->lis302dl_suspend_io)(lis, 1); -+ -+ /* save registers */ -+ for (n = 0; n < ARRAY_SIZE(regs_to_save); n++) -+ lis->regs[regs_to_save[n]] = -+ __reg_read(lis, regs_to_save[n]); -+ -+ /* power down or enable wakeup */ -+ if (!lis->wakeup.active) { -+ tmp = __reg_read(lis, LIS302DL_REG_CTRL1); -+ tmp &= ~LIS302DL_CTRL1_PD; -+ __reg_write(lis, LIS302DL_REG_CTRL1, tmp); -+ } else -+ __enable_wakeup(lis); -+ -+ /* place our IO to the device in sleep-compatible states */ -+ (lis->pdata->lis302dl_suspend_io)(lis, 0); -+ -+ local_irq_restore(flags); -+ -+ return 0; -+} -+ -+static int lis302dl_resume(struct platform_device *pdev) -+{ -+ struct lis302dl_info *lis = dev_get_drvdata(&pdev->dev); -+ unsigned long flags; -+ int n; -+ -+ if (lis->flags & LIS302DL_F_WUP_CLICK) -+ return 0; -+ -+ local_irq_save(flags); -+ -+ /* get our IO to the device back in operational states */ -+ (lis->pdata->lis302dl_suspend_io)(lis, 1); -+ -+ /* resume from powerdown first! */ -+ __reg_write(lis, LIS302DL_REG_CTRL1, -+ LIS302DL_CTRL1_PD | -+ LIS302DL_CTRL1_Xen | -+ LIS302DL_CTRL1_Yen | -+ LIS302DL_CTRL1_Zen); -+ mdelay(1); -+ -+ if (__lis302dl_reset_device(lis)) -+ dev_err(&pdev->dev, "device BOOT reload failed\n"); -+ -+ lis->regs[LIS302DL_REG_CTRL1] |= LIS302DL_CTRL1_PD | -+ LIS302DL_CTRL1_Xen | -+ LIS302DL_CTRL1_Yen | -+ LIS302DL_CTRL1_Zen; -+ -+ /* restore registers after resume */ -+ for (n = 0; n < ARRAY_SIZE(regs_to_save); n++) -+ __reg_write(lis, regs_to_save[n], lis->regs[regs_to_save[n]]); -+ -+ local_irq_restore(flags); -+ enable_irq(lis->pdata->interrupt); -+ -+ return 0; -+} -+#else -+#define lis302dl_suspend NULL -+#define lis302dl_resume NULL -+#endif -+ -+static struct platform_driver lis302dl_driver = { -+ .driver = { -+ .name = "lis302dl", -+ .owner = THIS_MODULE, -+ }, -+ -+ .probe = lis302dl_probe, -+ .remove = __devexit_p(lis302dl_remove), -+ .suspend = lis302dl_suspend, -+ .resume = lis302dl_resume, -+}; -+ -+static int __devinit lis302dl_init(void) -+{ -+ return platform_driver_register(&lis302dl_driver); -+} -+ -+static void __exit lis302dl_exit(void) -+{ -+ platform_driver_unregister(&lis302dl_driver); -+} -+ -+MODULE_AUTHOR("Harald Welte "); -+MODULE_LICENSE("GPL"); -+ -+module_init(lis302dl_init); -+module_exit(lis302dl_exit); -Index: linux-2.6.24.7/drivers/input/misc/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/input/misc/Makefile 2008-12-11 22:46:09.000000000 +0100 -+++ linux-2.6.24.7/drivers/input/misc/Makefile 2008-12-11 22:47:43.000000000 +0100 -@@ -19,3 +19,4 @@ obj-$(CONFIG_INPUT_YEALINK) += yealink. - obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o - obj-$(CONFIG_INPUT_UINPUT) += uinput.o - obj-$(CONFIG_INPUT_GPIO_BUTTONS) += gpio_buttons.o -+obj-$(CONFIG_INPUT_LIS302DL) += lis302dl.o -Index: linux-2.6.24.7/drivers/input/mousedev.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/input/mousedev.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/input/mousedev.c 2008-12-11 22:46:49.000000000 +0100 -@@ -1009,6 +1009,7 @@ static const struct input_device_id mous - .evbit = { BIT_MASK(EV_KEY) | BIT_MASK(EV_REL) }, - .relbit = { BIT_MASK(REL_WHEEL) }, - }, /* A separate scrollwheel */ -+#if 0 - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | - INPUT_DEVICE_ID_MATCH_KEYBIT | -@@ -1018,6 +1019,7 @@ static const struct input_device_id mous - .absbit = { BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) }, - }, /* A tablet like device, at least touch detection, - two absolute axes */ -+#endif - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | - INPUT_DEVICE_ID_MATCH_KEYBIT | -Index: linux-2.6.24.7/drivers/input/touchscreen/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/input/touchscreen/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/input/touchscreen/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -67,6 +67,24 @@ config TOUCHSCREEN_FUJITSU - To compile this driver as a module, choose M here: the - module will be called fujitsu-ts. - -+config TOUCHSCREEN_S3C2410 -+ tristate "Samsung S3C2410 touchscreen input driver" -+ depends on ARCH_S3C2410 && INPUT && INPUT_TOUCHSCREEN -+ select SERIO -+ help -+ Say Y here if you have the s3c2410 touchscreen. -+ -+ If unsure, say N. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called s3c2410_ts. -+ -+config TOUCHSCREEN_S3C2410_DEBUG -+ boolean "Samsung S3C2410 touchscreen debug messages" -+ depends on TOUCHSCREEN_S3C2410 -+ help -+ Select this if you want debug messages -+ - config TOUCHSCREEN_GUNZE - tristate "Gunze AHL-51S touchscreen" - select SERIO -Index: linux-2.6.24.7/drivers/input/touchscreen/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/input/touchscreen/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/input/touchscreen/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -19,3 +19,4 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += pe - obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o - obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o - obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o -+obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o -Index: linux-2.6.24.7/drivers/input/touchscreen/s3c2410_ts.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/input/touchscreen/s3c2410_ts.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,589 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ * Copyright (c) 2004 Arnaud Patard -+ * iPAQ H1940 touchscreen support -+ * -+ * ChangeLog -+ * -+ * 2004-09-05: Herbert Pötzl -+ * - added clock (de-)allocation code -+ * -+ * 2005-03-06: Arnaud Patard -+ * - h1940_ -> s3c2410 (this driver is now also used on the n30 -+ * machines :P) -+ * - Debug messages are now enabled with the config option -+ * TOUCHSCREEN_S3C2410_DEBUG -+ * - Changed the way the value are read -+ * - Input subsystem should now work -+ * - Use ioremap and readl/writel -+ * -+ * 2005-03-23: Arnaud Patard -+ * - Make use of some undocumented features of the touchscreen -+ * controller -+ * -+ * 2007-05-23: Harald Welte -+ * - Add proper support for S32440 -+ * -+ * 2008-06-18: Andy Green -+ * - Outlier removal -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+ -+/* For ts.dev.id.version */ -+#define S3C2410TSVERSION 0x0101 -+ -+#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) -+ -+#define WAIT4INT(x) (((x)<<8) | \ -+ S3C2410_ADCTSC_YM_SEN | \ -+ S3C2410_ADCTSC_YP_SEN | \ -+ S3C2410_ADCTSC_XP_SEN | \ -+ S3C2410_ADCTSC_XY_PST(3)) -+ -+#define AUTOPST (S3C2410_ADCTSC_YM_SEN | \ -+ S3C2410_ADCTSC_YP_SEN | \ -+ S3C2410_ADCTSC_XP_SEN | \ -+ S3C2410_ADCTSC_AUTO_PST | \ -+ S3C2410_ADCTSC_XY_PST(0)) -+ -+#define DEBUG_LVL KERN_DEBUG -+ -+#define TOUCH_STANDBY_FLAG 0 -+#define TOUCH_PRESSED_FLAG 1 -+#define TOUCH_RELEASE_FLAG 2 -+ -+#define TOUCH_RELEASE_TIMEOUT (HZ >> 4) -+ -+MODULE_AUTHOR("Arnaud Patard "); -+MODULE_DESCRIPTION("s3c2410 touchscreen driver"); -+MODULE_LICENSE("GPL"); -+ -+/* -+ * Definitions & global arrays. -+ */ -+ -+ -+static char *s3c2410ts_name = "s3c2410 TouchScreen"; -+ -+/* -+ * Per-touchscreen data. -+ */ -+ -+struct s3c2410ts_sample { -+ int x; -+ int y; -+}; -+ -+struct s3c2410ts { -+ struct input_dev *dev; -+ long xp; -+ long yp; -+ int count; -+ int shift; -+ int extent; /* 1 << shift */ -+ -+ /* the raw sample fifo is a lightweight way to track a running average -+ * of all taken samples. "running average" here means that it gives -+ * correct average for each sample, not only at the end of block of -+ * samples -+ */ -+ int excursion_filter_len; -+ struct s3c2410ts_sample *raw_sample_fifo; -+ int head_raw_fifo; -+ int tail_raw_fifo; -+ struct s3c2410ts_sample raw_running_avg; -+ int reject_threshold_vs_avg; -+ int flag_previous_exceeded_threshold; -+ int flag_first_touch_sent; -+}; -+ -+static struct s3c2410ts ts; -+static void __iomem *base_addr; -+ -+static void clear_raw_fifo(void) -+{ -+ ts.head_raw_fifo = 0; -+ ts.tail_raw_fifo = 0; -+ ts.raw_running_avg.x = 0; -+ ts.raw_running_avg.y = 0; -+ ts.flag_previous_exceeded_threshold = 0; -+ ts.flag_first_touch_sent = TOUCH_STANDBY_FLAG; -+} -+ -+ -+static inline void s3c2410_ts_connect(void) -+{ -+ s3c2410_gpio_cfgpin(S3C2410_GPG12, S3C2410_GPG12_XMON); -+ s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPG13_nXPON); -+ s3c2410_gpio_cfgpin(S3C2410_GPG14, S3C2410_GPG14_YMON); -+ s3c2410_gpio_cfgpin(S3C2410_GPG15, S3C2410_GPG15_nYPON); -+} -+ -+static void touch_timer_fire(unsigned long data); -+static struct timer_list touch_timer = -+ TIMER_INITIALIZER(touch_timer_fire, 0, 0); -+ -+static void touch_timer_fire(unsigned long data) -+{ -+ unsigned long data0; -+ unsigned long data1; -+ int updown; -+ -+ data0 = readl(base_addr + S3C2410_ADCDAT0); -+ data1 = readl(base_addr + S3C2410_ADCDAT1); -+ -+ updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && -+ (!(data1 & S3C2410_ADCDAT0_UPDOWN)); -+ -+ if ( updown && ts.flag_first_touch_sent == TOUCH_RELEASE_FLAG ) { -+ ts.flag_first_touch_sent = TOUCH_PRESSED_FLAG; -+ } -+ -+ if (updown) { -+ if (ts.count != 0) { -+ ts.xp >>= ts.shift; -+ ts.yp >>= ts.shift; -+ -+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG -+ { -+ struct timeval tv; -+ -+ do_gettimeofday(&tv); -+ printk(DEBUG_LVL "T:%06d, X:%03ld, Y:%03ld\n", -+ (int)tv.tv_usec, ts.xp, ts.yp); -+ } -+#endif -+ -+ input_report_abs(ts.dev, ABS_X, ts.xp); -+ input_report_abs(ts.dev, ABS_Y, ts.yp); -+ -+ input_report_key(ts.dev, BTN_TOUCH, 1); -+ input_report_abs(ts.dev, ABS_PRESSURE, 1); -+ input_sync(ts.dev); -+ ts.flag_first_touch_sent = TOUCH_PRESSED_FLAG; -+ } -+ -+ ts.xp = 0; -+ ts.yp = 0; -+ ts.count = 0; -+ -+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, -+ base_addr+S3C2410_ADCTSC); -+ writel(readl(base_addr+S3C2410_ADCCON) | -+ S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); -+ } else { -+ ts.count = 0; -+ -+ if ( ts.flag_first_touch_sent == TOUCH_RELEASE_FLAG ) { -+ input_report_key(ts.dev, BTN_TOUCH, 0); -+ input_report_abs(ts.dev, ABS_PRESSURE, 0); -+ input_sync(ts.dev); -+ ts.flag_first_touch_sent = TOUCH_STANDBY_FLAG; -+ } if ( ts.flag_first_touch_sent == TOUCH_PRESSED_FLAG ) { -+ ts.flag_first_touch_sent = TOUCH_RELEASE_FLAG; -+ mod_timer(&touch_timer, jiffies + TOUCH_RELEASE_TIMEOUT); -+ } -+ -+ writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); -+ } -+} -+ -+static irqreturn_t stylus_updown(int irq, void *dev_id) -+{ -+ unsigned long data0; -+ unsigned long data1; -+ int updown; -+ -+ data0 = readl(base_addr+S3C2410_ADCDAT0); -+ data1 = readl(base_addr+S3C2410_ADCDAT1); -+ -+ updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && -+ (!(data1 & S3C2410_ADCDAT0_UPDOWN)); -+ -+ /* TODO we should never get an interrupt with updown set while -+ * the timer is running, but maybe we ought to verify that the -+ * timer isn't running anyways. */ -+ -+ if (updown) -+ touch_timer_fire(0); -+ -+ return IRQ_HANDLED; -+} -+ -+ -+static irqreturn_t stylus_action(int irq, void *dev_id) -+{ -+ unsigned long x; -+ unsigned long y; -+ int length = (ts.head_raw_fifo - ts.tail_raw_fifo) & (ts.extent - 1); -+ int scaled_avg_x; -+ int scaled_avg_y; -+ -+ x = readl(base_addr + S3C2410_ADCDAT0) & S3C2410_ADCDAT0_XPDATA_MASK; -+ y = readl(base_addr + S3C2410_ADCDAT1) & S3C2410_ADCDAT1_YPDATA_MASK; -+ -+ if (!length) -+ goto store_sample; -+ -+ scaled_avg_x = ts.raw_running_avg.x / length; -+ scaled_avg_y = ts.raw_running_avg.y / length; -+ -+ /* we appear to accept every sample into both the running average FIFO -+ * and the summing average. BUT, if the last sample crossed a -+ * machine-set threshold, each time we do a beauty contest -+ * on the new sample comparing if it is closer to the running -+ * average and the previous sample. If it is closer to the previous -+ * suspicious sample, we assume the change is real and accept both -+ * if the new sample has returned to being closer to the average than -+ * the previous sample, we take the previous sample as an excursion -+ * and overwrite it in both the running average and summing average. -+ */ -+ -+ if (ts.flag_previous_exceeded_threshold) -+ /* new one closer to "nonconformist" previous, or average? -+ * Pythagoras? Who? Don't need it because large excursion -+ * will be accounted for correctly this way -+ */ -+ if ((abs(x - scaled_avg_x) + abs(y - scaled_avg_y)) < -+ (abs(x - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].x) + -+ abs(y - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].y))) { -+ /* it's closer to average, reject previous as a one- -+ * shot excursion, by overwriting it -+ */ -+ ts.xp += x - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].x; -+ ts.yp += y - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].y; -+ ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].x = x; -+ ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].y = y; -+ /* no new sample: replaced previous, so we are done */ -+ goto completed; -+ } -+ /* else it was closer to nonconformist previous: it's likely -+ * a genuine consistent move then. -+ * Keep previous and add new guy. -+ */ -+ -+ if ((x >= scaled_avg_x - ts.reject_threshold_vs_avg) && -+ (x <= scaled_avg_x + ts.reject_threshold_vs_avg) && -+ (y >= scaled_avg_y - ts.reject_threshold_vs_avg) && -+ (y <= scaled_avg_y + ts.reject_threshold_vs_avg)) -+ ts.flag_previous_exceeded_threshold = 0; -+ else -+ ts.flag_previous_exceeded_threshold = 1; -+ -+store_sample: -+ ts.xp += x; -+ ts.yp += y; -+ ts.count++; -+ -+ /* remove oldest sample from avg when we have full pipeline */ -+ if (((ts.head_raw_fifo + 1) & (ts.extent - 1)) == ts.tail_raw_fifo) { -+ ts.raw_running_avg.x -= ts.raw_sample_fifo[ts.tail_raw_fifo].x; -+ ts.raw_running_avg.y -= ts.raw_sample_fifo[ts.tail_raw_fifo].y; -+ ts.tail_raw_fifo = (ts.tail_raw_fifo + 1) & (ts.extent - 1); -+ } -+ /* always add current sample to fifo and average */ -+ ts.raw_sample_fifo[ts.head_raw_fifo].x = x; -+ ts.raw_sample_fifo[ts.head_raw_fifo].y = y; -+ ts.raw_running_avg.x += x; -+ ts.raw_running_avg.y += y; -+ ts.head_raw_fifo = (ts.head_raw_fifo + 1) & (ts.extent - 1); -+ -+completed: -+ if (ts.count >= (1 << ts.shift)) { -+ mod_timer(&touch_timer, jiffies + 1); -+ writel(WAIT4INT(1), base_addr+S3C2410_ADCTSC); -+ goto bail; -+ } -+ -+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, -+ base_addr+S3C2410_ADCTSC); -+ writel(readl(base_addr+S3C2410_ADCCON) | -+ S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); -+ -+bail: -+ return IRQ_HANDLED; -+} -+ -+static struct clk *adc_clock; -+ -+/* -+ * The functions for inserting/removing us as a module. -+ */ -+ -+static int __init s3c2410ts_probe(struct platform_device *pdev) -+{ -+ int rc; -+ struct s3c2410_ts_mach_info *info; -+ struct input_dev *input_dev; -+ -+ info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data; -+ -+ if (!info) -+ { -+ dev_err(&pdev->dev, "Hm... too bad: no platform data for ts\n"); -+ return -EINVAL; -+ } -+ -+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG -+ printk(DEBUG_LVL "Entering s3c2410ts_init\n"); -+#endif -+ -+ adc_clock = clk_get(NULL, "adc"); -+ if (!adc_clock) { -+ dev_err(&pdev->dev, "failed to get adc clock source\n"); -+ return -ENOENT; -+ } -+ clk_enable(adc_clock); -+ -+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG -+ printk(DEBUG_LVL "got and enabled clock\n"); -+#endif -+ -+ base_addr = ioremap(S3C2410_PA_ADC,0x20); -+ if (base_addr == NULL) { -+ dev_err(&pdev->dev, "Failed to remap register block\n"); -+ return -ENOMEM; -+ } -+ -+ -+ /* If we acutally are a S3C2410: Configure GPIOs */ -+ if (!strcmp(pdev->name, "s3c2410-ts")) -+ s3c2410_ts_connect(); -+ -+ if ((info->presc & 0xff) > 0) -+ writel(S3C2410_ADCCON_PRSCEN | -+ S3C2410_ADCCON_PRSCVL(info->presc&0xFF), -+ base_addr + S3C2410_ADCCON); -+ else -+ writel(0, base_addr+S3C2410_ADCCON); -+ -+ -+ /* Initialise registers */ -+ if ((info->delay & 0xffff) > 0) -+ writel(info->delay & 0xffff, base_addr + S3C2410_ADCDLY); -+ -+ writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC); -+ -+ /* Initialise input stuff */ -+ memset(&ts, 0, sizeof(struct s3c2410ts)); -+ input_dev = input_allocate_device(); -+ -+ if (!input_dev) { -+ dev_err(&pdev->dev, "Unable to allocate the input device\n"); -+ return -ENOMEM; -+ } -+ -+ ts.dev = input_dev; -+ ts.dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) | -+ BIT_MASK(EV_ABS); -+ ts.dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); -+ input_set_abs_params(ts.dev, ABS_X, 0, 0x3FF, 0, 0); -+ input_set_abs_params(ts.dev, ABS_Y, 0, 0x3FF, 0, 0); -+ input_set_abs_params(ts.dev, ABS_PRESSURE, 0, 1, 0, 0); -+ -+ ts.dev->private = &ts; -+ ts.dev->name = s3c2410ts_name; -+ ts.dev->id.bustype = BUS_RS232; -+ ts.dev->id.vendor = 0xDEAD; -+ ts.dev->id.product = 0xBEEF; -+ ts.dev->id.version = S3C2410TSVERSION; -+ -+ ts.shift = info->oversampling_shift; -+ ts.extent = 1 << info->oversampling_shift; -+ ts.reject_threshold_vs_avg = info->reject_threshold_vs_avg; -+ ts.excursion_filter_len = 1 << info->excursion_filter_len_bits; -+ -+ ts.raw_sample_fifo = kmalloc(sizeof(struct s3c2410ts_sample) * -+ ts.excursion_filter_len, GFP_KERNEL); -+ clear_raw_fifo(); -+ -+ /* Get irqs */ -+ if (request_irq(IRQ_ADC, stylus_action, IRQF_SAMPLE_RANDOM, -+ "s3c2410_action", ts.dev)) { -+ dev_err(&pdev->dev, "Could not allocate ts IRQ_ADC !\n"); -+ iounmap(base_addr); -+ return -EIO; -+ } -+ if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM, -+ "s3c2410_action", ts.dev)) { -+ dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n"); -+ free_irq(IRQ_ADC, ts.dev); -+ iounmap(base_addr); -+ return -EIO; -+ } -+ -+ dev_info(&pdev->dev, "successfully loaded\n"); -+ -+ /* All went ok, so register to the input system */ -+ rc = input_register_device(ts.dev); -+ if (rc) { -+ free_irq(IRQ_TC, ts.dev); -+ free_irq(IRQ_ADC, ts.dev); -+ clk_disable(adc_clock); -+ iounmap(base_addr); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int s3c2410ts_remove(struct platform_device *pdev) -+{ -+ disable_irq(IRQ_ADC); -+ disable_irq(IRQ_TC); -+ free_irq(IRQ_TC,ts.dev); -+ free_irq(IRQ_ADC,ts.dev); -+ -+ if (adc_clock) { -+ clk_disable(adc_clock); -+ clk_put(adc_clock); -+ adc_clock = NULL; -+ } -+ -+ kfree(ts.raw_sample_fifo); -+ -+ input_unregister_device(ts.dev); -+ iounmap(base_addr); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ writel(TSC_SLEEP, base_addr+S3C2410_ADCTSC); -+ writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_STDBM, -+ base_addr+S3C2410_ADCCON); -+ -+ disable_irq(IRQ_ADC); -+ disable_irq(IRQ_TC); -+ -+ clk_disable(adc_clock); -+ -+ return 0; -+} -+ -+static int s3c2410ts_resume(struct platform_device *pdev) -+{ -+ struct s3c2410_ts_mach_info *info = -+ ( struct s3c2410_ts_mach_info *)pdev->dev.platform_data; -+ -+ clk_enable(adc_clock); -+ mdelay(1); -+ -+ clear_raw_fifo(); -+ -+ enable_irq(IRQ_ADC); -+ enable_irq(IRQ_TC); -+ -+ if ((info->presc&0xff) > 0) -+ writel(S3C2410_ADCCON_PRSCEN | -+ S3C2410_ADCCON_PRSCVL(info->presc&0xFF), -+ base_addr+S3C2410_ADCCON); -+ else -+ writel(0,base_addr+S3C2410_ADCCON); -+ -+ /* Initialise registers */ -+ if ((info->delay & 0xffff) > 0) -+ writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY); -+ -+ writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); -+ -+ return 0; -+} -+ -+#else -+#define s3c2410ts_suspend NULL -+#define s3c2410ts_resume NULL -+#endif -+ -+static struct platform_driver s3c2410ts_driver = { -+ .driver = { -+ .name = "s3c2410-ts", -+ .owner = THIS_MODULE, -+ }, -+ .probe = s3c2410ts_probe, -+ .remove = s3c2410ts_remove, -+ .suspend = s3c2410ts_suspend, -+ .resume = s3c2410ts_resume, -+ -+}; -+ -+static struct platform_driver s3c2440ts_driver = { -+ .driver = { -+ .name = "s3c2440-ts", -+ .owner = THIS_MODULE, -+ }, -+ .probe = s3c2410ts_probe, -+ .remove = s3c2410ts_remove, -+ .suspend = s3c2410ts_suspend, -+ .resume = s3c2410ts_resume, -+ -+}; -+ -+static int __init s3c2410ts_init(void) -+{ -+ int rc; -+ -+ rc = platform_driver_register(&s3c2410ts_driver); -+ if (rc < 0) -+ return rc; -+ -+ rc = platform_driver_register(&s3c2440ts_driver); -+ if (rc < 0) -+ platform_driver_unregister(&s3c2410ts_driver); -+ -+ return rc; -+} -+ -+static void __exit s3c2410ts_exit(void) -+{ -+ platform_driver_unregister(&s3c2440ts_driver); -+ platform_driver_unregister(&s3c2410ts_driver); -+} -+ -+module_init(s3c2410ts_init); -+module_exit(s3c2410ts_exit); -+ -+/* -+ Local variables: -+ compile-command: "make ARCH=arm CROSS_COMPILE=/usr/local/arm/3.3.2/bin/arm-linux- -k -C ../../.." -+ c-basic-offset: 8 -+ End: -+*/ -Index: linux-2.6.24.7/drivers/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -74,6 +74,8 @@ source "drivers/hid/Kconfig" - - source "drivers/usb/Kconfig" - -+source "drivers/sdio/Kconfig" -+ - source "drivers/mmc/Kconfig" - - source "drivers/leds/Kconfig" -Index: linux-2.6.24.7/drivers/leds/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/leds/Kconfig 2008-12-11 22:46:09.000000000 +0100 -+++ linux-2.6.24.7/drivers/leds/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -57,7 +57,7 @@ config LEDS_TOSA - - config LEDS_S3C24XX - tristate "LED Support for Samsung S3C24XX GPIO LEDs" -- depends on LEDS_CLASS && ARCH_S3C2410 -+ depends on LEDS_CLASS && ARCH_S3C2410 && S3C2410_PWM - help - This option enables support for LEDs connected to GPIO lines - on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. -@@ -120,6 +120,19 @@ config LEDS_CM_X270 - help - This option enables support for the CM-X270 LEDs. - -+config LEDS_NEO1973_VIBRATOR -+ tristate "Vibrator Support for the FIC Neo1973 GSM phone" -+ depends on LEDS_CLASS && MACH_NEO1973 -+ select S3C2440_C_FIQ -+ help -+ This option enables support for the vibrator on the FIC Neo1973. -+ -+config LEDS_NEO1973_GTA02 -+ tristate "LED Support for the FIC Neo1973 (GTA02)" -+ depends on LEDS_CLASS && MACH_NEO1973_GTA02 -+ help -+ This option enables support for the LEDs on the FIC Neo1973. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS -Index: linux-2.6.24.7/drivers/leds/leds-neo1973-gta02.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/leds/leds-neo1973-gta02.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,231 @@ -+/* -+ * LED driver for the FIC Neo1973 GTA02 GSM phone -+ * -+ * (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MAX_LEDS 3 -+#define COUNTER 256 -+ -+struct gta02_led_priv -+{ -+ spinlock_t lock; -+ struct led_classdev cdev; -+ struct s3c2410_pwm pwm; -+ unsigned int gpio; -+ unsigned int has_pwm; -+}; -+ -+struct gta02_led_bundle -+{ -+ int num_leds; -+ struct gta02_led_priv led[MAX_LEDS]; -+}; -+ -+static inline struct gta02_led_priv *to_priv(struct led_classdev *led_cdev) -+{ -+ return container_of(led_cdev, struct gta02_led_priv, cdev); -+} -+ -+static inline struct gta02_led_bundle *to_bundle(struct led_classdev *led_cdev) -+{ -+ return dev_get_drvdata(led_cdev->dev->parent); -+} -+ -+static void gta02led_set(struct led_classdev *led_cdev, -+ enum led_brightness value) -+{ -+ unsigned long flags; -+ struct gta02_led_priv *lp = to_priv(led_cdev); -+ -+ /* -+ * value == 255 -> 99% duty cycle (full power) -+ * value == 128 -> 50% duty cycle (medium power) -+ * value == 0 -> 0% duty cycle (zero power) -+ */ -+ spin_lock_irqsave(&lp->lock, flags); -+ -+ if (lp->has_pwm) { -+ s3c2410_pwm_duty_cycle(value, &lp->pwm); -+ } else { -+ neo1973_gpb_setpin(lp->gpio, value ? 1 : 0); -+ } -+ -+ spin_unlock_irqrestore(&lp->lock, flags); -+} -+ -+#ifdef CONFIG_PM -+static int gta02led_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct gta02_led_bundle *bundle = platform_get_drvdata(pdev); -+ int i; -+ -+ for (i = 0; i < bundle->num_leds; i++) -+ led_classdev_suspend(&bundle->led[i].cdev); -+ -+ return 0; -+} -+ -+static int gta02led_resume(struct platform_device *pdev) -+{ -+ struct gta02_led_bundle *bundle = platform_get_drvdata(pdev); -+ int i; -+ -+ for (i = 0; i < bundle->num_leds; i++) -+ led_classdev_resume(&bundle->led[i].cdev); -+ -+ return 0; -+} -+#endif -+ -+static int __init gta02led_probe(struct platform_device *pdev) -+{ -+ int i, rc; -+ struct gta02_led_bundle *bundle; -+ -+ if (!machine_is_neo1973_gta02()) -+ return -EIO; -+ -+ bundle = kzalloc(sizeof(struct gta02_led_bundle), GFP_KERNEL); -+ if (!bundle) -+ return -ENOMEM; -+ platform_set_drvdata(pdev, bundle); -+ -+ for (i = 0; i < pdev->num_resources; i++) { -+ struct gta02_led_priv *lp; -+ struct resource *r; -+ -+ if (i >= MAX_LEDS) -+ break; -+ -+ r = platform_get_resource(pdev, 0, i); -+ if (!r || !r->start || !r->name) -+ continue; -+ -+ lp = &bundle->led[i]; -+ -+ lp->gpio = r->start; -+ lp->cdev.name = r->name; -+ lp->cdev.brightness_set = gta02led_set; -+ -+ switch (lp->gpio) { -+ case S3C2410_GPB0: -+ lp->has_pwm = 1; -+ lp->pwm.timerid = PWM0; -+ s3c2410_gpio_cfgpin(lp->gpio, S3C2410_GPB0_TOUT0); -+ break; -+ case S3C2410_GPB1: -+ lp->has_pwm = 1; -+ lp->pwm.timerid = PWM1; -+ s3c2410_gpio_cfgpin(lp->gpio, S3C2410_GPB1_TOUT1); -+ break; -+ case S3C2410_GPB2: -+ lp->has_pwm = 1; -+ lp->pwm.timerid = PWM2; -+ s3c2410_gpio_cfgpin(lp->gpio, S3C2410_GPB2_TOUT2); -+ break; -+ case S3C2410_GPB3: -+ lp->has_pwm = 1; -+ lp->pwm.timerid = PWM3; -+ s3c2410_gpio_cfgpin(lp->gpio, S3C2410_GPB3_TOUT3); -+ break; -+ default: -+ break; -+ } -+ -+ lp->pwm.prescaler = 0; -+ lp->pwm.divider = S3C2410_TCFG1_MUX3_DIV8; -+ lp->pwm.counter = COUNTER; -+ lp->pwm.comparer = COUNTER; -+ s3c2410_pwm_enable(&lp->pwm); -+ s3c2410_pwm_start(&lp->pwm); -+ -+ switch (lp->gpio) { -+ case S3C2410_GPB0: -+ case S3C2410_GPB1: -+ case S3C2410_GPB2: -+ case S3C2410_GPB3: -+ lp->has_pwm = 0; -+ s3c2410_gpio_cfgpin(lp->gpio, S3C2410_GPIO_OUTPUT); -+ neo1973_gpb_add_shadow_gpio(lp->gpio); -+ break; -+ default: -+ break; -+ } -+ -+ spin_lock_init(&lp->lock); -+ rc = led_classdev_register(&pdev->dev, &lp->cdev); -+ } -+ -+ bundle->num_leds = i; -+ -+ return 0; -+} -+ -+static int gta02led_remove(struct platform_device *pdev) -+{ -+ struct gta02_led_bundle *bundle = platform_get_drvdata(pdev); -+ int i; -+ -+ for (i = 0; i < bundle->num_leds; i++) { -+ struct gta02_led_priv *lp = &bundle->led[i]; -+ if (lp->has_pwm) -+ s3c2410_pwm_disable(&lp->pwm); -+ else -+ gta02led_set(&lp->cdev, 0); -+ -+ led_classdev_unregister(&lp->cdev); -+ } -+ -+ platform_set_drvdata(pdev, NULL); -+ kfree(bundle); -+ -+ return 0; -+} -+ -+static struct platform_driver gta02led_driver = { -+ .probe = gta02led_probe, -+ .remove = gta02led_remove, -+#ifdef CONFIG_PM -+ .suspend = gta02led_suspend, -+ .resume = gta02led_resume, -+#endif -+ .driver = { -+ .name = "gta02-led", -+ }, -+}; -+ -+static int __init gta02led_init(void) -+{ -+ return platform_driver_register(>a02led_driver); -+} -+ -+static void __exit gta02led_exit(void) -+{ -+ platform_driver_unregister(>a02led_driver); -+} -+ -+module_init(gta02led_init); -+module_exit(gta02led_exit); -+ -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION("FIC Neo1973 GTA02 LED driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/leds/leds-neo1973-vibrator.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/leds/leds-neo1973-vibrator.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,202 @@ -+/* -+ * LED driver for the vibrator of the FIC Neo1973 GSM Phone -+ * -+ * (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Javi Roman : -+ * Implement PWM support for GTA01Bv4 and later -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define COUNTER 64 -+ -+struct neo1973_vib_priv { -+ struct led_classdev cdev; -+ unsigned int gpio; -+ struct mutex mutex; -+ unsigned int has_pwm; -+ struct s3c2410_pwm pwm; -+}; -+ -+static void neo1973_vib_vib_set(struct led_classdev *led_cdev, -+ enum led_brightness value) -+{ -+ struct neo1973_vib_priv *vp = -+ container_of(led_cdev, struct neo1973_vib_priv, cdev); -+ -+ if (machine_is_neo1973_gta02()) { /* use FIQ to control GPIO */ -+ fiq_ipc.vib_pwm = value; /* set it for FIQ */ -+ fiq_kick(); /* start up FIQs if not already going */ -+ return; -+ } -+ /* -+ * value == 255 -> 99% duty cycle (full power) -+ * value == 128 -> 50% duty cycle (medium power) -+ * value == 0 -> 0% duty cycle (zero power) -+ */ -+ mutex_lock(&vp->mutex); -+ if (vp->has_pwm) -+ s3c2410_pwm_duty_cycle(value / 4, &vp->pwm); -+ else { -+ if (value) -+ neo1973_gpb_setpin(vp->gpio, 1); -+ else -+ neo1973_gpb_setpin(vp->gpio, 0); -+ } -+ -+ mutex_unlock(&vp->mutex); -+} -+ -+static struct neo1973_vib_priv neo1973_vib_led = { -+ .cdev = { -+ .name = "neo1973:vibrator", -+ .brightness_set = neo1973_vib_vib_set, -+ }, -+}; -+ -+static int neo1973_vib_init_hw(struct neo1973_vib_priv *vp) -+{ -+ int rc; -+ -+ rc = s3c2410_pwm_init(&vp->pwm); -+ if (rc) -+ return rc; -+ -+ vp->pwm.timerid = PWM3; -+ /* use same prescaler as arch/arm/plat-s3c24xx/time.c */ -+ vp->pwm.prescaler = (6 - 1) / 2; -+ vp->pwm.divider = S3C2410_TCFG1_MUX3_DIV2; -+ vp->pwm.counter = COUNTER; -+ vp->pwm.comparer = COUNTER; -+ -+ rc = s3c2410_pwm_enable(&vp->pwm); -+ if (rc) -+ return rc; -+ -+ s3c2410_pwm_start(&vp->pwm); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int neo1973_vib_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ led_classdev_suspend(&neo1973_vib_led.cdev); -+ return 0; -+} -+ -+static int neo1973_vib_resume(struct platform_device *dev) -+{ -+ struct neo1973_vib_priv *vp = platform_get_drvdata(dev); -+ -+ if (vp->has_pwm) -+ neo1973_vib_init_hw(vp); -+ -+ led_classdev_resume(&neo1973_vib_led.cdev); -+ -+ return 0; -+} -+#endif /* CONFIG_PM */ -+ -+static int __init neo1973_vib_probe(struct platform_device *pdev) -+{ -+ struct resource *r; -+ int rc; -+ -+ if (!machine_is_neo1973_gta01() && !machine_is_neo1973_gta02()) -+ return -EIO; -+ -+ r = platform_get_resource(pdev, 0, 0); -+ if (!r || !r->start) -+ return -EIO; -+ -+ neo1973_vib_led.gpio = r->start; -+ platform_set_drvdata(pdev, &neo1973_vib_led); -+ -+ if (machine_is_neo1973_gta02()) { /* use FIQ to control GPIO */ -+ neo1973_gpb_setpin(neo1973_vib_led.gpio, 0); /* off */ -+ s3c2410_gpio_cfgpin(neo1973_vib_led.gpio, S3C2410_GPIO_OUTPUT); -+ /* safe, kmalloc'd copy needed for FIQ ISR */ -+ fiq_ipc.vib_gpio_pin = neo1973_vib_led.gpio; -+ fiq_ipc.vib_pwm = 0; /* off */ -+ goto configured; -+ } -+ -+ /* TOUT3 */ -+ if (neo1973_vib_led.gpio == S3C2410_GPB3) { -+ rc = neo1973_vib_init_hw(&neo1973_vib_led); -+ if (rc) -+ return rc; -+ -+ s3c2410_pwm_duty_cycle(0, &neo1973_vib_led.pwm); -+ s3c2410_gpio_cfgpin(neo1973_vib_led.gpio, S3C2410_GPB3_TOUT3); -+ neo1973_vib_led.has_pwm = 1; -+ } -+configured: -+ mutex_init(&neo1973_vib_led.mutex); -+ -+ return led_classdev_register(&pdev->dev, &neo1973_vib_led.cdev); -+} -+ -+static int neo1973_vib_remove(struct platform_device *pdev) -+{ -+ if (machine_is_neo1973_gta02()) /* use FIQ to control GPIO */ -+ fiq_ipc.vib_pwm = 0; /* off */ -+ /* would only need kick if already off so no kick needed */ -+ -+ if (neo1973_vib_led.has_pwm) -+ s3c2410_pwm_disable(&neo1973_vib_led.pwm); -+ -+ led_classdev_unregister(&neo1973_vib_led.cdev); -+ -+ mutex_destroy(&neo1973_vib_led.mutex); -+ -+ return 0; -+} -+ -+static struct platform_driver neo1973_vib_driver = { -+ .probe = neo1973_vib_probe, -+ .remove = neo1973_vib_remove, -+#ifdef CONFIG_PM -+ .suspend = neo1973_vib_suspend, -+ .resume = neo1973_vib_resume, -+#endif -+ .driver = { -+ .name = "neo1973-vibrator", -+ }, -+}; -+ -+static int __init neo1973_vib_init(void) -+{ -+ return platform_driver_register(&neo1973_vib_driver); -+} -+ -+static void __exit neo1973_vib_exit(void) -+{ -+ platform_driver_unregister(&neo1973_vib_driver); -+} -+ -+module_init(neo1973_vib_init); -+module_exit(neo1973_vib_exit); -+ -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION("FIC Neo1973 vibrator driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/leds/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/leds/Makefile 2008-12-11 22:46:09.000000000 +0100 -+++ linux-2.6.24.7/drivers/leds/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -20,6 +20,8 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds- - obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o - obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o - obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o -+obj-$(CONFIG_LEDS_NEO1973_VIBRATOR) += leds-neo1973-vibrator.o -+obj-$(CONFIG_LEDS_NEO1973_GTA02) += leds-neo1973-gta02.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o -Index: linux-2.6.24.7/drivers/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -77,6 +77,7 @@ obj-$(CONFIG_LGUEST_GUEST) += lguest/ - obj-$(CONFIG_CPU_FREQ) += cpufreq/ - obj-$(CONFIG_CPU_IDLE) += cpuidle/ - obj-$(CONFIG_MMC) += mmc/ -+obj-$(CONFIG_SDIO) += sdio/ - obj-$(CONFIG_NEW_LEDS) += leds/ - obj-$(CONFIG_INFINIBAND) += infiniband/ - obj-$(CONFIG_SGI_SN) += sn/ -Index: linux-2.6.24.7/drivers/mfd/glamo/glamo-core.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/glamo-core.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,1340 @@ -+/* Smedia Glamo 336x/337x driver -+ * -+ * (C) 2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#ifdef CONFIG_PM -+#include -+#endif -+ -+#include "glamo-regs.h" -+#include "glamo-core.h" -+ -+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) -+ -+#define GLAMO_MEM_REFRESH_COUNT 0x100 -+ -+static struct glamo_core *glamo_handle; -+ -+static inline void __reg_write(struct glamo_core *glamo, -+ u_int16_t reg, u_int16_t val) -+{ -+ writew(val, glamo->base + reg); -+} -+ -+static inline u_int16_t __reg_read(struct glamo_core *glamo, -+ u_int16_t reg) -+{ -+ return readw(glamo->base + reg); -+} -+ -+static void __reg_set_bit_mask(struct glamo_core *glamo, -+ u_int16_t reg, u_int16_t mask, -+ u_int16_t val) -+{ -+ u_int16_t tmp; -+ -+ val &= mask; -+ -+ tmp = __reg_read(glamo, reg); -+ tmp &= ~mask; -+ tmp |= val; -+ __reg_write(glamo, reg, tmp); -+} -+ -+static void reg_set_bit_mask(struct glamo_core *glamo, -+ u_int16_t reg, u_int16_t mask, -+ u_int16_t val) -+{ -+ spin_lock(&glamo->lock); -+ __reg_set_bit_mask(glamo, reg, mask, val); -+ spin_unlock(&glamo->lock); -+} -+ -+static inline void __reg_set_bit(struct glamo_core *glamo, -+ u_int16_t reg, u_int16_t bit) -+{ -+ __reg_set_bit_mask(glamo, reg, bit, 0xffff); -+} -+ -+static inline void __reg_clear_bit(struct glamo_core *glamo, -+ u_int16_t reg, u_int16_t bit) -+{ -+ __reg_set_bit_mask(glamo, reg, bit, 0); -+} -+ -+static inline void glamo_vmem_write(struct glamo_core *glamo, u_int32_t addr, -+ u_int16_t *src, int len) -+{ -+ if (addr & 0x0001 || (unsigned long)src & 0x0001 || len & 0x0001) { -+ dev_err(&glamo->pdev->dev, "unaligned write(0x%08x, 0x%p, " -+ "0x%x)!!\n", addr, src, len); -+ } -+ -+} -+ -+static inline void glamo_vmem_read(struct glamo_core *glamo, u_int16_t *buf, -+ u_int32_t addr, int len) -+{ -+ if (addr & 0x0001 || (unsigned long) buf & 0x0001 || len & 0x0001) { -+ dev_err(&glamo->pdev->dev, "unaligned read(0x%p, 0x08%x, " -+ "0x%x)!!\n", buf, addr, len); -+ } -+ -+ -+} -+ -+/*********************************************************************** -+ * resources of sibling devices -+ ***********************************************************************/ -+ -+#if 0 -+static struct resource glamo_core_resources[] = { -+ { -+ .start = GLAMO_REGOFS_GENERIC, -+ .end = GLAMO_REGOFS_GENERIC + 0x400, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = 0, -+ .end = 0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device glamo_core_dev = { -+ .name = "glamo-core", -+ .resource = &glamo_core_resources, -+ .num_resources = ARRAY_SIZE(glamo_core_resources), -+}; -+#endif -+ -+static struct resource glamo_jpeg_resources[] = { -+ { -+ .start = GLAMO_REGOFS_JPEG, -+ .end = GLAMO_REGOFS_MPEG - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_GLAMO_JPEG, -+ .end = IRQ_GLAMO_JPEG, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device glamo_jpeg_dev = { -+ .name = "glamo-jpeg", -+ .resource = glamo_jpeg_resources, -+ .num_resources = ARRAY_SIZE(glamo_jpeg_resources), -+}; -+ -+static struct resource glamo_mpeg_resources[] = { -+ { -+ .start = GLAMO_REGOFS_MPEG, -+ .end = GLAMO_REGOFS_LCD - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_GLAMO_MPEG, -+ .end = IRQ_GLAMO_MPEG, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device glamo_mpeg_dev = { -+ .name = "glamo-mpeg", -+ .resource = glamo_mpeg_resources, -+ .num_resources = ARRAY_SIZE(glamo_mpeg_resources), -+}; -+ -+static struct resource glamo_2d_resources[] = { -+ { -+ .start = GLAMO_REGOFS_2D, -+ .end = GLAMO_REGOFS_3D - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_GLAMO_2D, -+ .end = IRQ_GLAMO_2D, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device glamo_2d_dev = { -+ .name = "glamo-2d", -+ .resource = glamo_2d_resources, -+ .num_resources = ARRAY_SIZE(glamo_2d_resources), -+}; -+ -+static struct resource glamo_3d_resources[] = { -+ { -+ .start = GLAMO_REGOFS_3D, -+ .end = GLAMO_REGOFS_END - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static struct platform_device glamo_3d_dev = { -+ .name = "glamo-3d", -+ .resource = glamo_3d_resources, -+ .num_resources = ARRAY_SIZE(glamo_3d_resources), -+}; -+ -+static struct platform_device glamo_spigpio_dev = { -+ .name = "glamo-spi-gpio", -+}; -+ -+static struct resource glamo_fb_resources[] = { -+ /* FIXME: those need to be incremented by parent base */ -+ { -+ .name = "glamo-fb-regs", -+ .start = GLAMO_REGOFS_LCD, -+ .end = GLAMO_REGOFS_MMC - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .name = "glamo-fb-mem", -+ .start = GLAMO_OFFSET_FB, -+ .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static struct platform_device glamo_fb_dev = { -+ .name = "glamo-fb", -+ .resource = glamo_fb_resources, -+ .num_resources = ARRAY_SIZE(glamo_fb_resources), -+}; -+ -+static struct resource glamo_mmc_resources[] = { -+ { -+ /* FIXME: those need to be incremented by parent base */ -+ .start = GLAMO_REGOFS_MMC, -+ .end = GLAMO_REGOFS_MPROC0 - 1, -+ .flags = IORESOURCE_MEM -+ }, { -+ .start = IRQ_GLAMO_MMC, -+ .end = IRQ_GLAMO_MMC, -+ .flags = IORESOURCE_IRQ, -+ }, { /* our data buffer for MMC transfers */ -+ .start = GLAMO_OFFSET_FB + GLAMO_FB_SIZE, -+ .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE + -+ GLAMO_MMC_BUFFER_SIZE - 1, -+ .flags = IORESOURCE_MEM -+ }, -+}; -+ -+static struct platform_device glamo_mmc_dev = { -+ .name = "glamo-mci", -+ .resource = glamo_mmc_resources, -+ .num_resources = ARRAY_SIZE(glamo_mmc_resources), -+}; -+ -+struct glamo_mci_pdata glamo_mci_def_pdata = { -+ .gpio_detect = 0, -+ .glamo_set_mci_power = NULL, /* filled in from MFD platform data */ -+ .ocr_avail = MMC_VDD_20_21 | -+ MMC_VDD_21_22 | -+ MMC_VDD_22_23 | -+ MMC_VDD_23_24 | -+ MMC_VDD_24_25 | -+ MMC_VDD_25_26 | -+ MMC_VDD_26_27 | -+ MMC_VDD_27_28 | -+ MMC_VDD_28_29 | -+ MMC_VDD_29_30 | -+ MMC_VDD_30_31 | -+ MMC_VDD_32_33, -+ .glamo_irq_is_wired = NULL, /* filled in from MFD platform data */ -+ .mci_suspending = NULL, /* filled in from MFD platform data */ -+ .mci_all_dependencies_resumed = NULL, /* filled in from MFD plat data */ -+}; -+EXPORT_SYMBOL_GPL(glamo_mci_def_pdata); -+ -+ -+ -+static void mangle_mem_resources(struct resource *res, int num_res, -+ struct resource *parent) -+{ -+ int i; -+ -+ for (i = 0; i < num_res; i++) { -+ if (res[i].flags != IORESOURCE_MEM) -+ continue; -+ res[i].start += parent->start; -+ res[i].end += parent->start; -+ res[i].parent = parent; -+ } -+} -+ -+/*********************************************************************** -+ * IRQ demultiplexer -+ ***********************************************************************/ -+#define irq2glamo(x) (x - IRQ_GLAMO(0)) -+ -+static void glamo_ack_irq(unsigned int irq) -+{ -+ /* clear interrupt source */ -+ __reg_write(glamo_handle, GLAMO_REG_IRQ_CLEAR, -+ 1 << irq2glamo(irq)); -+} -+ -+static void glamo_mask_irq(unsigned int irq) -+{ -+ u_int16_t tmp; -+ -+ /* clear bit in enable register */ -+ tmp = __reg_read(glamo_handle, GLAMO_REG_IRQ_ENABLE); -+ tmp &= ~(1 << irq2glamo(irq)); -+ __reg_write(glamo_handle, GLAMO_REG_IRQ_ENABLE, tmp); -+} -+ -+static void glamo_unmask_irq(unsigned int irq) -+{ -+ u_int16_t tmp; -+ -+ /* set bit in enable register */ -+ tmp = __reg_read(glamo_handle, GLAMO_REG_IRQ_ENABLE); -+ tmp |= (1 << irq2glamo(irq)); -+ __reg_write(glamo_handle, GLAMO_REG_IRQ_ENABLE, tmp); -+} -+ -+static struct irq_chip glamo_irq_chip = { -+ .ack = glamo_ack_irq, -+ .mask = glamo_mask_irq, -+ .unmask = glamo_unmask_irq, -+}; -+ -+static void glamo_irq_demux_handler(unsigned int irq, struct irq_desc *desc) -+{ -+ const unsigned int cpu = smp_processor_id(); -+ -+ spin_lock(&desc->lock); -+ -+ desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); -+ -+ if (unlikely(desc->status & IRQ_INPROGRESS)) { -+ desc->status |= (IRQ_PENDING | IRQ_MASKED); -+ desc->chip->mask(irq); -+ desc->chip->ack(irq); -+ goto out_unlock; -+ } -+ -+ kstat_cpu(cpu).irqs[irq]++; -+ desc->chip->ack(irq); -+ desc->status |= IRQ_INPROGRESS; -+ -+ do { -+ u_int16_t irqstatus; -+ int i; -+ -+ if (unlikely((desc->status & -+ (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) == -+ (IRQ_PENDING | IRQ_MASKED))) { -+ /* dealing with pending IRQ, unmasking */ -+ desc->chip->unmask(irq); -+ desc->status &= ~IRQ_MASKED; -+ } -+ -+ desc->status &= ~IRQ_PENDING; -+ -+ /* read IRQ status register */ -+ irqstatus = __reg_read(glamo_handle, GLAMO_REG_IRQ_STATUS); -+ for (i = 0; i < 9; i++) -+ if (irqstatus & (1 << i)) -+ desc_handle_irq(IRQ_GLAMO(i), -+ irq_desc+IRQ_GLAMO(i)); -+ -+ } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING); -+ -+ desc->status &= ~IRQ_INPROGRESS; -+ -+out_unlock: -+ spin_unlock(&desc->lock); -+} -+ -+/*********************************************************************** -+ * 'engine' support -+ ***********************************************************************/ -+ -+int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine) -+{ -+ switch (engine) { -+ case GLAMO_ENGINE_LCD: -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD, -+ GLAMO_CLOCK_LCD_EN_M5CLK | -+ GLAMO_CLOCK_LCD_EN_DHCLK | -+ GLAMO_CLOCK_LCD_EN_DMCLK | -+ GLAMO_CLOCK_LCD_EN_DCLK | -+ GLAMO_CLOCK_LCD_DG_M5CLK | -+ GLAMO_CLOCK_LCD_DG_DMCLK, 0xffff); -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, -+ GLAMO_CLOCK_GEN51_EN_DIV_DHCLK | -+ GLAMO_CLOCK_GEN51_EN_DIV_DMCLK | -+ GLAMO_CLOCK_GEN51_EN_DIV_DCLK, 0xffff); -+ __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2), -+ GLAMO_HOSTBUS2_MMIO_EN_LCD, -+ 0xffff); -+ break; -+ case GLAMO_ENGINE_MMC: -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MMC, -+ GLAMO_CLOCK_MMC_EN_M9CLK | -+ GLAMO_CLOCK_MMC_EN_TCLK | -+ GLAMO_CLOCK_MMC_DG_M9CLK | -+ GLAMO_CLOCK_MMC_DG_TCLK, 0xffff); -+ __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2), -+ GLAMO_HOSTBUS2_MMIO_EN_MMC, -+ GLAMO_HOSTBUS2_MMIO_EN_MMC); -+ break; -+ case GLAMO_ENGINE_2D: -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D, -+ GLAMO_CLOCK_2D_EN_M7CLK | -+ GLAMO_CLOCK_2D_EN_GCLK | -+ GLAMO_CLOCK_2D_DG_M7CLK | -+ GLAMO_CLOCK_2D_DG_GCLK, 0xffff); -+ __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2), -+ GLAMO_HOSTBUS2_MMIO_EN_2D, -+ GLAMO_HOSTBUS2_MMIO_EN_2D); -+ break; -+ case GLAMO_ENGINE_CMDQ: -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D, -+ GLAMO_CLOCK_2D_EN_M6CLK, 0xffff); -+ __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2), -+ GLAMO_HOSTBUS2_MMIO_EN_CQ, -+ GLAMO_HOSTBUS2_MMIO_EN_CQ); -+ break; -+ /* FIXME: Implementation */ -+ default: -+ break; -+ } -+ -+ glamo->engine_enabled_bitfield |= 1 << engine; -+ -+ return 0; -+} -+ -+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine) -+{ -+ int ret; -+ -+ spin_lock(&glamo->lock); -+ -+ ret = __glamo_engine_enable(glamo, engine); -+ -+ spin_unlock(&glamo->lock); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(glamo_engine_enable); -+ -+int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine) -+{ -+ switch (engine) { -+ case GLAMO_ENGINE_LCD: -+ /* remove pixel clock to LCM */ -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD, -+ GLAMO_CLOCK_LCD_EN_DCLK, 0); -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD, -+ GLAMO_CLOCK_LCD_EN_DHCLK | -+ GLAMO_CLOCK_LCD_EN_DMCLK, 0); -+ /* kill memory clock */ -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_LCD, -+ GLAMO_CLOCK_LCD_EN_M5CLK, 0); -+ /* stop dividing the clocks */ -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, -+ GLAMO_CLOCK_GEN51_EN_DIV_DHCLK | -+ GLAMO_CLOCK_GEN51_EN_DIV_DMCLK | -+ GLAMO_CLOCK_GEN51_EN_DIV_DCLK, 0); -+ __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2), -+ GLAMO_HOSTBUS2_MMIO_EN_LCD, 0); -+ break; -+ -+ case GLAMO_ENGINE_MMC: -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_MMC, 0, -+ GLAMO_CLOCK_MMC_EN_M9CLK | -+ GLAMO_CLOCK_MMC_EN_TCLK | -+ GLAMO_CLOCK_MMC_DG_M9CLK | -+ GLAMO_CLOCK_MMC_DG_TCLK); -+ /* disable the TCLK divider clk input */ -+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, 0, -+ GLAMO_CLOCK_GEN51_EN_DIV_TCLK); -+ __reg_set_bit_mask(glamo, GLAMO_REG_HOSTBUS(2), 0, -+ GLAMO_HOSTBUS2_MMIO_EN_MMC); -+ /* good idea to hold the thing in reset when we power it off? */ -+/* writew(readw(glamo->base + GLAMO_REG_CLOCK_MMC) | -+ GLAMO_CLOCK_MMC_RESET, glamo->base + GLAMO_REG_CLOCK_MMC); -+*/ -+ break; -+ default: -+ break; -+ } -+ -+ glamo->engine_enabled_bitfield &= ~(1 << engine); -+ -+ return 0; -+} -+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine) -+{ -+ int ret; -+ -+ spin_lock(&glamo->lock); -+ -+ ret = __glamo_engine_disable(glamo, engine); -+ -+ spin_unlock(&glamo->lock); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(glamo_engine_disable); -+ -+static const u_int16_t engine_clock_regs[__NUM_GLAMO_ENGINES] = { -+ [GLAMO_ENGINE_LCD] = GLAMO_REG_CLOCK_LCD, -+ [GLAMO_ENGINE_MMC] = GLAMO_REG_CLOCK_MMC, -+ [GLAMO_ENGINE_ISP] = GLAMO_REG_CLOCK_ISP, -+ [GLAMO_ENGINE_JPEG] = GLAMO_REG_CLOCK_JPEG, -+ [GLAMO_ENGINE_3D] = GLAMO_REG_CLOCK_3D, -+ [GLAMO_ENGINE_2D] = GLAMO_REG_CLOCK_2D, -+ [GLAMO_ENGINE_MPEG_ENC] = GLAMO_REG_CLOCK_MPEG, -+ [GLAMO_ENGINE_MPEG_DEC] = GLAMO_REG_CLOCK_MPEG, -+}; -+ -+void glamo_engine_clkreg_set(struct glamo_core *glamo, -+ enum glamo_engine engine, -+ u_int16_t mask, u_int16_t val) -+{ -+ reg_set_bit_mask(glamo, engine_clock_regs[engine], mask, val); -+} -+EXPORT_SYMBOL_GPL(glamo_engine_clkreg_set); -+ -+u_int16_t glamo_engine_clkreg_get(struct glamo_core *glamo, -+ enum glamo_engine engine) -+{ -+ u_int16_t val; -+ -+ spin_lock(&glamo->lock); -+ val = __reg_read(glamo, engine_clock_regs[engine]); -+ spin_unlock(&glamo->lock); -+ -+ return val; -+} -+EXPORT_SYMBOL_GPL(glamo_engine_clkreg_get); -+ -+struct glamo_script reset_regs[] = { -+ [GLAMO_ENGINE_LCD] = { -+ GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET -+ }, -+#if 0 -+ [GLAMO_ENGINE_HOST] = { -+ GLAMO_REG_CLOCK_HOST, GLAMO_CLOCK_HOST_RESET -+ }, -+ [GLAMO_ENGINE_MEM] = { -+ GLAMO_REG_CLOCK_MEM, GLAMO_CLOCK_MEM_RESET -+ }, -+#endif -+ [GLAMO_ENGINE_MMC] = { -+ GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET -+ }, -+ [GLAMO_ENGINE_2D] = { -+ GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET -+ }, -+ [GLAMO_ENGINE_JPEG] = { -+ GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET -+ }, -+}; -+ -+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine) -+{ -+ struct glamo_script *rst; -+ -+ if (engine >= ARRAY_SIZE(reset_regs)) { -+ dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine); -+ return; -+ } -+ -+ rst = &reset_regs[engine]; -+ -+ spin_lock(&glamo->lock); -+ __reg_set_bit(glamo, rst->reg, rst->val); -+ spin_unlock(&glamo->lock); -+ -+ msleep(1); -+ -+ spin_lock(&glamo->lock); -+ __reg_clear_bit(glamo, rst->reg, rst->val); -+ spin_unlock(&glamo->lock); -+ -+ msleep(1); -+} -+EXPORT_SYMBOL_GPL(glamo_engine_reset); -+ -+void glamo_lcm_reset(int level) -+{ -+ if (!glamo_handle) -+ return; -+ -+ glamo_gpio_setpin(glamo_handle, GLAMO_GPIO4, level); -+ glamo_gpio_cfgpin(glamo_handle, GLAMO_GPIO4_OUTPUT); -+ -+} -+EXPORT_SYMBOL_GPL(glamo_lcm_reset); -+ -+enum glamo_pll { -+ GLAMO_PLL1, -+ GLAMO_PLL2, -+}; -+ -+static int glamo_pll_rate(struct glamo_core *glamo, -+ enum glamo_pll pll) -+{ -+ u_int16_t reg; -+ unsigned int div = 512; -+ /* FIXME: move osci into platform_data */ -+ unsigned int osci = 32768; -+ -+ if (osci == 32768) -+ div = 1; -+ -+ switch (pll) { -+ case GLAMO_PLL1: -+ reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1); -+ break; -+ case GLAMO_PLL2: -+ reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3); -+ break; -+ default: -+ return -EINVAL; -+ } -+ return (osci/div)*reg; -+} -+ -+int glamo_engine_reclock(struct glamo_core *glamo, -+ enum glamo_engine engine, -+ int ps) -+{ -+ int pll, khz; -+ u_int16_t reg, mask, val = 0; -+ -+ if (!ps) -+ return 0; -+ -+ switch (engine) { -+ case GLAMO_ENGINE_LCD: -+ pll = GLAMO_PLL1; -+ reg = GLAMO_REG_CLOCK_GEN7; -+ mask = 0xff; -+ break; -+ default: -+ dev_warn(&glamo->pdev->dev, -+ "reclock of engine 0x%x not supported\n", engine); -+ return -EINVAL; -+ break; -+ } -+ -+ pll = glamo_pll_rate(glamo, pll); -+ khz = 1000000000UL / ps; -+ -+ if (khz) -+ val = (pll / khz) / 1000; -+ -+ dev_dbg(&glamo->pdev->dev, -+ "PLL %d, kHZ %d, div %d\n", pll, khz, val); -+ -+ if (val) { -+ val--; -+ reg_set_bit_mask(glamo, reg, mask, val); -+ mdelay(5); /* wait some time to stabilize */ -+ -+ return 0; -+ } else { -+ return -EINVAL; -+ } -+} -+EXPORT_SYMBOL_GPL(glamo_engine_reclock); -+ -+/*********************************************************************** -+ * script support -+ ***********************************************************************/ -+ -+int glamo_run_script(struct glamo_core *glamo, struct glamo_script *script, -+ int len, int may_sleep) -+{ -+ int i; -+ -+ for (i = 0; i < len; i++) { -+ struct glamo_script *line = &script[i]; -+ -+ switch (line->reg) { -+ case 0xffff: -+ return 0; -+ case 0xfffe: -+ if (may_sleep) -+ msleep(line->val); -+ else -+ mdelay(line->val * 4); -+ break; -+ case 0xfffd: -+ /* spin until PLLs lock */ -+ while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3) -+ ; -+ break; -+ default: -+ __reg_write(glamo, script[i].reg, script[i].val); -+ break; -+ } -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL(glamo_run_script); -+ -+static struct glamo_script glamo_init_script[] = { -+ { GLAMO_REG_CLOCK_HOST, 0x1000 }, -+ { 0xfffe, 2 }, -+ { GLAMO_REG_CLOCK_MEMORY, 0x1000 }, -+ { GLAMO_REG_CLOCK_MEMORY, 0x2000 }, -+ { GLAMO_REG_CLOCK_LCD, 0x1000 }, -+ { GLAMO_REG_CLOCK_MMC, 0x1000 }, -+ { GLAMO_REG_CLOCK_ISP, 0x1000 }, -+ { GLAMO_REG_CLOCK_ISP, 0x3000 }, -+ { GLAMO_REG_CLOCK_JPEG, 0x1000 }, -+ { GLAMO_REG_CLOCK_3D, 0x1000 }, -+ { GLAMO_REG_CLOCK_3D, 0x3000 }, -+ { GLAMO_REG_CLOCK_2D, 0x1000 }, -+ { GLAMO_REG_CLOCK_2D, 0x3000 }, -+ { GLAMO_REG_CLOCK_RISC1, 0x1000 }, -+ { GLAMO_REG_CLOCK_MPEG, 0x3000 }, -+ { GLAMO_REG_CLOCK_MPEG, 0x3000 }, -+ { GLAMO_REG_CLOCK_MPROC, 0x1000 /*0x100f*/ }, -+ { 0xfffe, 2 }, -+ { GLAMO_REG_CLOCK_HOST, 0x0000 }, -+ { GLAMO_REG_CLOCK_MEMORY, 0x0000 }, -+ { GLAMO_REG_CLOCK_LCD, 0x0000 }, -+ { GLAMO_REG_CLOCK_MMC, 0x0000 }, -+#if 0 -+/* unused engines must be left in reset to stop MMC block read "blackouts" */ -+ { GLAMO_REG_CLOCK_ISP, 0x0000 }, -+ { GLAMO_REG_CLOCK_ISP, 0x0000 }, -+ { GLAMO_REG_CLOCK_JPEG, 0x0000 }, -+ { GLAMO_REG_CLOCK_3D, 0x0000 }, -+ { GLAMO_REG_CLOCK_3D, 0x0000 }, -+ { GLAMO_REG_CLOCK_2D, 0x0000 }, -+ { GLAMO_REG_CLOCK_2D, 0x0000 }, -+ { GLAMO_REG_CLOCK_RISC1, 0x0000 }, -+ { GLAMO_REG_CLOCK_MPEG, 0x0000 }, -+ { GLAMO_REG_CLOCK_MPEG, 0x0000 }, -+#endif -+ { GLAMO_REG_PLL_GEN1, 0x05db }, /* 48MHz */ -+ { GLAMO_REG_PLL_GEN3, 0x0aba }, /* 90MHz */ -+ { 0xfffd, 0 }, -+ /* -+ * b9 of this register MUST be zero to get any interrupts on INT# -+ * the other set bits enable all the engine interrupt sources -+ */ -+ { GLAMO_REG_IRQ_ENABLE, 0x01ff }, -+ { GLAMO_REG_CLOCK_GEN6, 0x2000 }, -+ { GLAMO_REG_CLOCK_GEN7, 0x0101 }, -+ { GLAMO_REG_CLOCK_GEN8, 0x0100 }, -+ { GLAMO_REG_CLOCK_HOST, 0x000d }, -+ { 0x200, 0x0ef0 }, -+ { 0x202, 0x07ff }, -+ { 0x212, 0x0000 }, -+ { 0x214, 0x4000 }, -+ { 0x216, 0xf00e }, -+ -+ /* S-Media recommended "set tiling mode to 512 mode for memory access -+ * more efficiency when 640x480" */ -+ { GLAMO_REG_MEM_TYPE, 0x0c74 }, /* 8MB, 16 word pg wr+rd */ -+ { GLAMO_REG_MEM_GEN, 0xafaf }, /* 63 grants min + max */ -+ /* -+ * the register below originally 0x0108 makes unreliable Glamo MMC -+ * write operations. Cranked to 0x05ad to add a wait state, the -+ * unreliability is not seen after 4GB of write / read testing -+ */ -+ { GLAMO_REG_MEM_TIMING1, 0x0108 }, -+ { GLAMO_REG_MEM_TIMING2, 0x0010 }, /* Taa = 3 MCLK */ -+ { GLAMO_REG_MEM_TIMING3, 0x0000 }, -+ { GLAMO_REG_MEM_TIMING4, 0x0000 }, /* CE1# delay fall/rise */ -+ { GLAMO_REG_MEM_TIMING5, 0x0000 }, /* UB# LB# */ -+ { GLAMO_REG_MEM_TIMING6, 0x0000 }, /* OE# */ -+ { GLAMO_REG_MEM_TIMING7, 0x0000 }, /* WE# */ -+ { GLAMO_REG_MEM_TIMING8, 0x1002 }, /* MCLK delay, was 0x1000 */ -+ { GLAMO_REG_MEM_TIMING9, 0x6006 }, -+ { GLAMO_REG_MEM_TIMING10, 0x00ff }, -+ { GLAMO_REG_MEM_TIMING11, 0x0001 }, -+ { GLAMO_REG_MEM_POWER1, 0x0020 }, -+ { GLAMO_REG_MEM_POWER2, 0x0000 }, -+ { GLAMO_REG_MEM_DRAM1, 0x0000 }, -+ { 0xfffe, 1 }, -+ { GLAMO_REG_MEM_DRAM1, 0xc100 }, -+ { 0xfffe, 1 }, -+ { GLAMO_REG_MEM_DRAM1, 0xe100 }, -+ { GLAMO_REG_MEM_DRAM2, 0x01d6 }, -+ { GLAMO_REG_CLOCK_MEMORY, 0x000b }, -+}; -+ -+ -+enum glamo_power { -+ GLAMO_POWER_ON, -+ GLAMO_POWER_SUSPEND, -+}; -+ -+static void glamo_power(struct glamo_core *glamo, -+ enum glamo_power new_state) -+{ -+ int n; -+ -+ spin_lock(&glamo->lock); -+ -+ dev_dbg(&glamo->pdev->dev, "***** glamo_power -> %d\n", new_state); -+ -+ switch (new_state) { -+ case GLAMO_POWER_ON: -+ /* power up PLL1 and PLL2 */ -+ __reg_set_bit_mask(glamo, GLAMO_REG_DFT_GEN6, 0x0001, 0xffff); -+ __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 0x2000, 0x0000); -+ -+ /* spin until PLL1 and PLL2 lock */ -+ while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3) -+ ; -+ -+ /* Get memory out of deep powerdown */ -+ -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM2, -+ (7 << 6) | /* tRC */ -+ (1 << 4) | /* tRP */ -+ (1 << 2) | /* tRCD */ -+ 2); /* CAS latency */ -+ -+ /* Stop self-refresh */ -+ -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1, -+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH | -+ GLAMO_MEM_DRAM1_EN_GATE_CKE | -+ GLAMO_MEM_REFRESH_COUNT); -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1, -+ GLAMO_MEM_DRAM1_EN_MODEREG_SET | -+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH | -+ GLAMO_MEM_DRAM1_EN_GATE_CKE | -+ GLAMO_MEM_REFRESH_COUNT); -+ -+ /* re-enable clocks to memory */ -+ -+ __reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, -+ GLAMO_CLOCK_MEM_EN_MOCACLK | -+ GLAMO_CLOCK_MEM_EN_M1CLK | -+ GLAMO_CLOCK_MEM_DG_M1CLK); -+ -+ /* restore each engine that was up before suspend */ -+ for (n = 0; n < __NUM_GLAMO_ENGINES; n++) -+ if (glamo->engine_enabled_bitfield_suspend & (1 << n)) -+ __glamo_engine_enable(glamo, n); -+ break; -+ -+ case GLAMO_POWER_SUSPEND: -+ /* stash a copy of which engines were running */ -+ glamo->engine_enabled_bitfield_suspend = -+ glamo->engine_enabled_bitfield; -+ -+ /* take down each engine before we kill mem and pll */ -+ for (n = 0; n < __NUM_GLAMO_ENGINES; n++) -+ if (glamo->engine_enabled_bitfield & (1 << n)) -+ __glamo_engine_disable(glamo, n); -+ -+ /* enable self-refresh */ -+ -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1, -+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH | -+ GLAMO_MEM_DRAM1_EN_GATE_CKE | -+ GLAMO_MEM_DRAM1_SELF_REFRESH | -+ GLAMO_MEM_REFRESH_COUNT); -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1, -+ GLAMO_MEM_DRAM1_EN_MODEREG_SET | -+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH | -+ GLAMO_MEM_DRAM1_EN_GATE_CKE | -+ GLAMO_MEM_DRAM1_SELF_REFRESH | -+ GLAMO_MEM_REFRESH_COUNT); -+ -+ /* force RAM into deep powerdown */ -+ -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM2, -+ GLAMO_MEM_DRAM2_DEEP_PWRDOWN | -+ (7 << 6) | /* tRC */ -+ (1 << 4) | /* tRP */ -+ (1 << 2) | /* tRCD */ -+ 2); /* CAS latency */ -+ -+ /* kill clocks to memory */ -+ -+ __reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, 0); -+ -+ /* power down PLL2 and then PLL1 */ -+ __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 0x2000, 0xffff); -+ __reg_set_bit_mask(glamo, GLAMO_REG_DFT_GEN5, 0x0001, 0xffff); -+ break; -+ } -+ -+ spin_unlock(&glamo->lock); -+} -+ -+#if 0 -+#define MEMDETECT_RETRY 6 -+static unsigned int detect_memsize(struct glamo_core *glamo) -+{ -+ int i; -+ -+ /*static const u_int16_t pattern[] = { -+ 0x1111, 0x8a8a, 0x2222, 0x7a7a, -+ 0x3333, 0x6a6a, 0x4444, 0x5a5a, -+ 0x5555, 0x4a4a, 0x6666, 0x3a3a, -+ 0x7777, 0x2a2a, 0x8888, 0x1a1a -+ }; */ -+ -+ for (i = 0; i < MEMDETECT_RETRY; i++) { -+ switch (glamo->type) { -+ case 3600: -+ __reg_write(glamo, GLAMO_REG_MEM_TYPE, 0x0072); -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100); -+ break; -+ case 3650: -+ switch (glamo->revision) { -+ case GLAMO_CORE_REV_A0: -+ if (i & 1) -+ __reg_write(glamo, GLAMO_REG_MEM_TYPE, -+ 0x097a); -+ else -+ __reg_write(glamo, GLAMO_REG_MEM_TYPE, -+ 0x0173); -+ -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000); -+ msleep(1); -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xc100); -+ break; -+ default: -+ if (i & 1) -+ __reg_write(glamo, GLAMO_REG_MEM_TYPE, -+ 0x0972); -+ else -+ __reg_write(glamo, GLAMO_REG_MEM_TYPE, -+ 0x0872); -+ -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0x0000); -+ msleep(1); -+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1, 0xe100); -+ break; -+ } -+ break; -+ case 3700: -+ /* FIXME */ -+ default: -+ break; -+ } -+ -+#if 0 -+ /* FIXME: finish implementation */ -+ for (j = 0; j < 8; j++) { -+ __ -+#endif -+ } -+ -+ return 0; -+} -+#endif -+ -+/* Find out if we can support this version of the Glamo chip */ -+static int glamo_supported(struct glamo_core *glamo) -+{ -+ u_int16_t dev_id, rev_id; /*, memsize; */ -+ -+ dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID); -+ rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID); -+ -+ switch (dev_id) { -+ case 0x3650: -+ switch (rev_id) { -+ case GLAMO_CORE_REV_A2: -+ break; -+ case GLAMO_CORE_REV_A0: -+ case GLAMO_CORE_REV_A1: -+ case GLAMO_CORE_REV_A3: -+ dev_warn(&glamo->pdev->dev, "untested core revision " -+ "%04x, your mileage may vary\n", rev_id); -+ break; -+ default: -+ dev_warn(&glamo->pdev->dev, "unknown glamo revision " -+ "%04x, your mileage may vary\n", rev_id); -+ /* maybe should abort ? */ -+ } -+ break; -+ case 0x3600: -+ case 0x3700: -+ default: -+ dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n", -+ dev_id); -+ return 0; -+ } -+ -+ dev_info(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x " -+ "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id, -+ glamo_pll_rate(glamo, GLAMO_PLL1), -+ glamo_pll_rate(glamo, GLAMO_PLL2)); -+ -+ return 1; -+} -+ -+static ssize_t regs_write(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ unsigned long reg = simple_strtoul(buf, NULL, 10); -+ struct glamo_core *glamo = dev_get_drvdata(dev); -+ -+ while (*buf && (*buf != ' ')) -+ buf++; -+ if (*buf != ' ') -+ return -EINVAL; -+ while (*buf && (*buf == ' ')) -+ buf++; -+ if (!*buf) -+ return -EINVAL; -+ -+ printk(KERN_INFO"reg 0x%02lX <-- 0x%04lX\n", -+ reg, simple_strtoul(buf, NULL, 10)); -+ -+ __reg_write(glamo, reg, simple_strtoul(buf, NULL, 10)); -+ -+ return count; -+} -+ -+static ssize_t regs_read(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct glamo_core *glamo = dev_get_drvdata(dev); -+ int n, n1 = 0, r; -+ char * end = buf; -+ struct reg_range { -+ int start; -+ int count; -+ char * name; -+ }; -+ struct reg_range reg_range[] = { -+ { 0x0000, 0x76, "General" }, -+ { 0x0200, 0x100, "Host Bus" }, -+ { 0x0300, 0x38, "Memory" }, -+/* { 0x0400, 0x100, "Sensor" }, -+ { 0x0500, 0x300, "ISP" }, -+ { 0x0800, 0x400, "JPEG" }, -+ { 0x0c00, 0x500, "MPEG" }, -+ { 0x1100, 0x400, "LCD" }, -+ { 0x1500, 0x080, "MPU 0" }, -+ { 0x1580, 0x080, "MPU 1" }, -+ { 0x1600, 0x080, "Command Queue" }, -+ { 0x1680, 0x080, "RISC CPU" }, -+ { 0x1700, 0x400, "2D Unit" }, -+ { 0x1b00, 0x900, "3D Unit" }, -+*/ -+ }; -+ -+ spin_lock(&glamo->lock); -+ -+ for (r = 0; r < ARRAY_SIZE(reg_range); r++) { -+ n1 = 0; -+ end += sprintf(end, "\n%s\n", reg_range[r].name); -+ for (n = reg_range[r].start; -+ n < reg_range[r].start + reg_range[r].count; n += 2) { -+ if (((n1++) & 7) == 0) -+ end += sprintf(end, "\n%04X: ", n); -+ end += sprintf(end, "%04x ", __reg_read(glamo, n)); -+ } -+ end += sprintf(end, "\n"); -+ } -+ spin_unlock(&glamo->lock); -+ -+ return end - buf; -+} -+ -+static DEVICE_ATTR(regs, 0644, regs_read, regs_write); -+static struct attribute *glamo_sysfs_entries[] = { -+ &dev_attr_regs.attr, -+ NULL -+}; -+static struct attribute_group glamo_attr_group = { -+ .name = NULL, -+ .attrs = glamo_sysfs_entries, -+}; -+ -+ -+ -+static int __init glamo_probe(struct platform_device *pdev) -+{ -+ int rc = 0, irq; -+ struct glamo_core *glamo; -+ -+ if (glamo_handle) { -+ dev_err(&pdev->dev, -+ "This driver supports only one instance\n"); -+ return -EBUSY; -+ } -+ -+ glamo = kmalloc(GFP_KERNEL, sizeof(*glamo)); -+ if (!glamo) -+ return -ENOMEM; -+ -+ spin_lock_init(&glamo->lock); -+ glamo_handle = glamo; -+ glamo->pdev = pdev; -+ glamo->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ glamo->irq = platform_get_irq(pdev, 0); -+ glamo->pdata = pdev->dev.platform_data; -+ if (!glamo->mem || !glamo->pdata) { -+ dev_err(&pdev->dev, "platform device with no MEM/PDATA ?\n"); -+ rc = -ENOENT; -+ goto out_free; -+ } -+ -+ init_resume_dependency_list(&glamo->resume_dependency); -+ -+ /* register a number of sibling devices whoise IOMEM resources -+ * are siblings of pdev's IOMEM resource */ -+#if 0 -+ glamo_core_dev.dev.parent = &pdev.dev; -+ mangle_mem_resources(glamo_core_dev.resources, -+ glamo_core_dev.num_resources, glamo->mem); -+ glamo_core_dev.resources[1].start = glamo->irq; -+ glamo_core_dev.resources[1].end = glamo->irq; -+ platform_device_register(&glamo_core_dev); -+#endif -+ /* only remap the generic, hostbus and memory controller registers */ -+ glamo->base = ioremap(glamo->mem->start, GLAMO_REGOFS_VIDCAP); -+ if (!glamo->base) { -+ dev_err(&pdev->dev, "failed to ioremap() memory region\n"); -+ goto out_free; -+ } -+ -+ /* bring MCI specific stuff over from our MFD platform data */ -+ glamo_mci_def_pdata.glamo_set_mci_power = -+ glamo->pdata->glamo_set_mci_power; -+ glamo_mci_def_pdata.glamo_mci_use_slow = -+ glamo->pdata->glamo_mci_use_slow; -+ glamo_mci_def_pdata.glamo_irq_is_wired = -+ glamo->pdata->glamo_irq_is_wired; -+ glamo_mci_def_pdata.mci_suspending = -+ glamo->pdata->mci_suspending; -+ glamo_mci_def_pdata.mci_all_dependencies_resumed = -+ glamo->pdata->mci_all_dependencies_resumed; -+ -+ glamo_2d_dev.dev.parent = &pdev->dev; -+ mangle_mem_resources(glamo_2d_dev.resource, -+ glamo_2d_dev.num_resources, glamo->mem); -+ platform_device_register(&glamo_2d_dev); -+ -+ glamo_3d_dev.dev.parent = &pdev->dev; -+ mangle_mem_resources(glamo_3d_dev.resource, -+ glamo_3d_dev.num_resources, glamo->mem); -+ platform_device_register(&glamo_3d_dev); -+ -+ glamo_jpeg_dev.dev.parent = &pdev->dev; -+ mangle_mem_resources(glamo_jpeg_dev.resource, -+ glamo_jpeg_dev.num_resources, glamo->mem); -+ platform_device_register(&glamo_jpeg_dev); -+ -+ glamo_mpeg_dev.dev.parent = &pdev->dev; -+ mangle_mem_resources(glamo_mpeg_dev.resource, -+ glamo_mpeg_dev.num_resources, glamo->mem); -+ platform_device_register(&glamo_mpeg_dev); -+ -+ glamo->pdata->glamo = glamo; -+ glamo_fb_dev.dev.parent = &pdev->dev; -+ glamo_fb_dev.dev.platform_data = glamo->pdata; -+ mangle_mem_resources(glamo_fb_dev.resource, -+ glamo_fb_dev.num_resources, glamo->mem); -+ platform_device_register(&glamo_fb_dev); -+ -+ glamo->pdata->spigpio_info->glamo = glamo; -+ glamo_spigpio_dev.dev.parent = &pdev->dev; -+ glamo_spigpio_dev.dev.platform_data = glamo->pdata->spigpio_info; -+ platform_device_register(&glamo_spigpio_dev); -+ -+ glamo_mmc_dev.dev.parent = &pdev->dev; -+ /* we need it later to give to the engine enable and disable */ -+ glamo_mci_def_pdata.pglamo = glamo; -+ mangle_mem_resources(glamo_mmc_dev.resource, -+ glamo_mmc_dev.num_resources, glamo->mem); -+ platform_device_register(&glamo_mmc_dev); -+ -+ /* only request the generic, hostbus and memory controller MMIO */ -+ glamo->mem = request_mem_region(glamo->mem->start, -+ GLAMO_REGOFS_VIDCAP, "glamo-core"); -+ if (!glamo->mem) { -+ dev_err(&pdev->dev, "failed to request memory region\n"); -+ goto out_free; -+ } -+ -+ if (!glamo_supported(glamo)) { -+ dev_err(&pdev->dev, "This Glamo is not supported\n"); -+ goto out_free; -+ } -+ -+ rc = sysfs_create_group(&pdev->dev.kobj, &glamo_attr_group); -+ if (rc < 0) { -+ dev_err(&pdev->dev, "cannot create sysfs group\n"); -+ goto out_free; -+ } -+ -+ platform_set_drvdata(pdev, glamo); -+ -+ dev_dbg(&glamo->pdev->dev, "running init script\n"); -+ glamo_run_script(glamo, glamo_init_script, -+ ARRAY_SIZE(glamo_init_script), 1); -+ -+ dev_info(&glamo->pdev->dev, "Glamo core now %uHz CPU / %uHz Memory)\n", -+ glamo_pll_rate(glamo, GLAMO_PLL1), -+ glamo_pll_rate(glamo, GLAMO_PLL2)); -+ -+ glamo_lcm_reset(1); -+ -+ for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) { -+ set_irq_chip(irq, &glamo_irq_chip); -+ set_irq_handler(irq, handle_level_irq); -+ set_irq_flags(irq, IRQF_VALID); -+ } -+ -+ if (glamo->pdata->glamo_irq_is_wired && -+ !glamo->pdata->glamo_irq_is_wired()) { -+ set_irq_chained_handler(glamo->irq, glamo_irq_demux_handler); -+ set_irq_type(glamo->irq, IRQT_FALLING); -+ glamo->irq_works = 1; -+ } else -+ glamo->irq_works = 0; -+ -+ return 0; -+ -+out_free: -+ glamo_handle = NULL; -+ kfree(glamo); -+ return rc; -+} -+ -+static int glamo_remove(struct platform_device *pdev) -+{ -+ struct glamo_core *glamo = platform_get_drvdata(pdev); -+ int irq; -+ -+ disable_irq(glamo->irq); -+ set_irq_chained_handler(glamo->irq, NULL); -+ -+ for (irq = IRQ_GLAMO(0); irq <= IRQ_GLAMO(8); irq++) { -+ set_irq_flags(irq, 0); -+ set_irq_chip(irq, NULL); -+ } -+ -+ platform_set_drvdata(pdev, NULL); -+ platform_device_unregister(&glamo_fb_dev); -+ platform_device_unregister(&glamo_mmc_dev); -+ iounmap(glamo->base); -+ release_mem_region(glamo->mem->start, GLAMO_REGOFS_VIDCAP); -+ glamo_handle = NULL; -+ kfree(glamo); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+ -+/* have to export this because struct glamo_core is opaque */ -+ -+void glamo_register_resume_dependency(struct resume_dependency * -+ resume_dependency) -+{ -+ register_resume_dependency(&glamo_handle->resume_dependency, -+ resume_dependency); -+ if (glamo_handle->is_suspended) -+ activate_all_resume_dependencies( -+ &glamo_handle->resume_dependency); -+} -+EXPORT_SYMBOL_GPL(glamo_register_resume_dependency); -+ -+ -+static int glamo_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ glamo_power(glamo_handle, GLAMO_POWER_SUSPEND); -+ glamo_handle->is_suspended = 1; -+ activate_all_resume_dependencies(&glamo_handle->resume_dependency); -+ return 0; -+} -+ -+static int glamo_resume(struct platform_device *pdev) -+{ -+ glamo_power(glamo_handle, GLAMO_POWER_ON); -+ glamo_handle->is_suspended = 0; -+ callback_all_resume_dependencies(&glamo_handle->resume_dependency); -+ -+ return 0; -+} -+#else -+#define glamo_suspend NULL -+#define glamo_resume NULL -+#endif -+ -+static struct platform_driver glamo_driver = { -+ .probe = glamo_probe, -+ .remove = glamo_remove, -+ .suspend_late = glamo_suspend, -+ .resume_early = glamo_resume, -+ .driver = { -+ .name = "glamo3362", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __devinit glamo_init(void) -+{ -+ return platform_driver_register(&glamo_driver); -+} -+ -+static void __exit glamo_cleanup(void) -+{ -+ platform_driver_unregister(&glamo_driver); -+} -+ -+module_init(glamo_init); -+module_exit(glamo_cleanup); -+ -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION("Smedia Glamo 336x/337x core/resource driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/mfd/glamo/glamo-core.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/glamo-core.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,107 @@ -+#ifndef __GLAMO_CORE_H -+#define __GLAMO_CORE_H -+ -+#include -+#include -+ -+/* for the time being, we put the on-screen framebuffer into the lowest -+ * VRAM space. This should make the code easily compatible with the various -+ * 2MB/4MB/8MB variants of the Smedia chips */ -+#define GLAMO_OFFSET_VRAM 0x800000 -+#define GLAMO_OFFSET_FB (GLAMO_OFFSET_VRAM) -+ -+/* we only allocate the minimum possible size for the framebuffer to make -+ * sure we have sufficient memory for other functions of the chip */ -+//#define GLAMO_FB_SIZE (640*480*4) /* == 0x12c000 */ -+#define GLAMO_INTERNAL_RAM_SIZE 0x800000 -+#define GLAMO_MMC_BUFFER_SIZE (64 * 1024) -+#define GLAMO_FB_SIZE (GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE) -+ -+ -+struct glamo_core { -+ int irq; -+ int irq_works; /* 0 means PCB does not support Glamo IRQ */ -+ struct resource *mem; -+ struct resource *mem_core; -+ void __iomem *base; -+ struct platform_device *pdev; -+ struct glamofb_platform_data *pdata; -+ u_int16_t type; -+ u_int16_t revision; -+ spinlock_t lock; -+ struct resume_dependency resume_dependency; -+ u32 engine_enabled_bitfield; -+ u32 engine_enabled_bitfield_suspend; -+ int is_suspended; -+}; -+ -+struct glamo_script { -+ u_int16_t reg; -+ u_int16_t val; -+}; -+ -+int glamo_run_script(struct glamo_core *glamo, -+ struct glamo_script *script, int len, int may_sleep); -+ -+enum glamo_engine { -+ GLAMO_ENGINE_CAPTURE, -+ GLAMO_ENGINE_ISP, -+ GLAMO_ENGINE_JPEG, -+ GLAMO_ENGINE_MPEG_ENC, -+ GLAMO_ENGINE_MPEG_DEC, -+ GLAMO_ENGINE_LCD, -+ GLAMO_ENGINE_CMDQ, -+ GLAMO_ENGINE_2D, -+ GLAMO_ENGINE_3D, -+ GLAMO_ENGINE_MMC, -+ GLAMO_ENGINE_MICROP0, -+ GLAMO_ENGINE_RISC, -+ GLAMO_ENGINE_MICROP1_MPEG_ENC, -+ GLAMO_ENGINE_MICROP1_MPEG_DEC, -+#if 0 -+ GLAMO_ENGINE_H264_DEC, -+ GLAMO_ENGINE_RISC1, -+ GLAMO_ENGINE_SPI, -+#endif -+ __NUM_GLAMO_ENGINES -+}; -+ -+struct glamo_mci_pdata { -+ struct glamo_core * pglamo; -+ unsigned int gpio_detect; -+ unsigned int gpio_wprotect; -+ unsigned long ocr_avail; -+ void (*glamo_set_mci_power)(unsigned char power_mode, -+ unsigned short vdd); -+ /* glamo-mci asking if it should use the slow clock to card */ -+ int (*glamo_mci_use_slow)(void); -+ int (*glamo_irq_is_wired)(void); -+ void (*mci_suspending)(struct platform_device *dev); -+ int (*mci_all_dependencies_resumed)(struct platform_device -+ *dev); -+ -+}; -+ -+ -+static inline void glamo_reg_access_delay(void) -+{ -+ int n; -+ -+ for (n = 0; n != 2; n++) -+ nop(); -+} -+ -+ -+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine); -+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine); -+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine); -+int glamo_engine_reclock(struct glamo_core *glamo, -+ enum glamo_engine engine, int ps); -+ -+void glamo_engine_clkreg_set(struct glamo_core *glamo, -+ enum glamo_engine engine, -+ u_int16_t mask, u_int16_t val); -+ -+u_int16_t glamo_engine_clkreg_get(struct glamo_core *glamo, -+ enum glamo_engine engine); -+#endif /* __GLAMO_CORE_H */ -Index: linux-2.6.24.7/drivers/mfd/glamo/glamo-fb.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/glamo-fb.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,911 @@ -+/* Smedia Glamo 336x/337x driver -+ * -+ * (C) 2007-2008 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#ifdef CONFIG_PM -+#include -+#endif -+ -+#include -+ -+#include "glamo-regs.h" -+#include "glamo-core.h" -+ -+#ifndef DEBUG -+#define GLAMO_LOG(...) -+#else -+#define GLAMO_LOG(...) \ -+do { \ -+ printk(KERN_DEBUG "in %s:%s:%d", __FILE__, __func__, __LINE__); \ -+ printk(KERN_DEBUG __VA_ARGS__); \ -+} while (0); -+#endif -+ -+ -+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) -+ -+struct glamofb_handle { -+ struct fb_info *fb; -+ struct device *dev; -+ struct resource *reg; -+ struct resource *fb_res; -+ char __iomem *base; -+ struct glamofb_platform_data *mach_info; -+ char __iomem *cursor_addr; -+ int cursor_on; -+ u_int32_t pseudo_pal[16]; -+ spinlock_t lock_cmd; -+}; -+ -+/* 'sibling' spi device for lcm init */ -+static struct platform_device glamo_spi_dev = { -+ .name = "glamo-lcm-spi", -+}; -+ -+ -+static int reg_read(struct glamofb_handle *glamo, -+ u_int16_t reg) -+{ -+ glamo_reg_access_delay(); -+ return readw(glamo->base + reg); -+} -+ -+static void reg_write(struct glamofb_handle *glamo, -+ u_int16_t reg, u_int16_t val) -+{ -+ glamo_reg_access_delay(); -+ writew(val, glamo->base + reg); -+} -+ -+static struct glamo_script glamo_regs[] = { -+ { GLAMO_REG_LCD_MODE1, 0x0020 }, -+ /* no display rotation, no hardware cursor, no dither, no gamma, -+ * no retrace flip, vsync low-active, hsync low active, -+ * no TVCLK, no partial display, hw dest color from fb, -+ * no partial display mode, LCD1, software flip, */ -+ { GLAMO_REG_LCD_MODE2, 0x1020 }, -+ /* no video flip, no ptr, no ptr, dhclk off, -+ * normal mode, no cpuif, -+ * res, serial msb first, single fb, no fr ctrl, -+ * cpu if bits all zero, no crc -+ * 0000 0000 0010 0000 */ -+ { GLAMO_REG_LCD_MODE3, 0x0b40 }, -+ /* src data rgb565, res, 18bit rgb666 -+ * 000 01 011 0100 0000 */ -+ { GLAMO_REG_LCD_POLARITY, 0x440c }, -+ /* DE high active, no cpu/lcd if, cs0 force low, a0 low active, -+ * np cpu if, 9bit serial data, sclk rising edge latch data -+ * 01 00 0 100 0 000 01 0 0 */ -+ { GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */ -+ { GLAMO_REG_LCD_A_BASE2, 0x0000 }, /* display A base address 22:16 */ -+ { GLAMO_REG_LCD_CURSOR_BASE1, 0x0000 }, /* cursor base address 15:0 */ -+ { GLAMO_REG_LCD_CURSOR_BASE2, 0x000f }, /* cursor base address 22:16 */ -+}; -+ -+static int glamofb_run_script(struct glamofb_handle *glamo, -+ struct glamo_script *script, int len) -+{ -+ int i; -+ -+ for (i = 0; i < len; i++) { -+ struct glamo_script *line = &script[i]; -+ -+ if (line->reg == 0xffff) -+ return 0; -+ else if (line->reg == 0xfffe) -+ msleep(line->val); -+ else -+ reg_write(glamo, script[i].reg, script[i].val); -+ } -+ -+ return 0; -+} -+ -+static int glamofb_check_var(struct fb_var_screeninfo *var, -+ struct fb_info *info) -+{ -+ struct glamofb_handle *glamo = info->par; -+ -+ if (var->yres > glamo->mach_info->yres.max) -+ var->yres = glamo->mach_info->yres.max; -+ else if (var->yres < glamo->mach_info->yres.min) -+ var->yres = glamo->mach_info->yres.min; -+ -+ if (var->xres > glamo->mach_info->xres.max) -+ var->xres = glamo->mach_info->xres.max; -+ else if (var->xres < glamo->mach_info->xres.min) -+ var->xres = glamo->mach_info->xres.min; -+ -+ if (var->bits_per_pixel > glamo->mach_info->bpp.max) -+ var->bits_per_pixel = glamo->mach_info->bpp.max; -+ else if (var->bits_per_pixel < glamo->mach_info->bpp.min) -+ var->bits_per_pixel = glamo->mach_info->bpp.min; -+ -+ /* FIXME: set rgb positions */ -+ switch (var->bits_per_pixel) { -+ case 16: -+ switch (reg_read(glamo, GLAMO_REG_LCD_MODE3) & 0xc000) { -+ case GLAMO_LCD_SRC_RGB565: -+ var->red.offset = 11; -+ var->green.offset = 5; -+ var->blue.offset = 0; -+ var->red.length = 5; -+ var->green.length = 6; -+ var->blue.length = 5; -+ var->transp.length = 0; -+ break; -+ case GLAMO_LCD_SRC_ARGB1555: -+ var->transp.offset = 15; -+ var->red.offset = 10; -+ var->green.offset = 5; -+ var->blue.offset = 0; -+ var->transp.length = 1; -+ var->red.length = 5; -+ var->green.length = 5; -+ var->blue.length = 5; -+ break; -+ case GLAMO_LCD_SRC_ARGB4444: -+ var->transp.offset = 12; -+ var->red.offset = 8; -+ var->green.offset = 4; -+ var->blue.offset = 0; -+ var->transp.length = 4; -+ var->red.length = 4; -+ var->green.length = 4; -+ var->blue.length = 4; -+ break; -+ } -+ break; -+ case 24: -+ case 32: -+ default: -+ /* The Smedia Glamo doesn't support anything but 16bit color */ -+ printk(KERN_ERR -+ "Smedia driver does not [yet?] support 24/32bpp\n"); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static void reg_set_bit_mask(struct glamofb_handle *glamo, -+ u_int16_t reg, u_int16_t mask, -+ u_int16_t val) -+{ -+ u_int16_t tmp; -+ -+ val &= mask; -+ -+ tmp = reg_read(glamo, reg); -+ tmp &= ~mask; -+ tmp |= val; -+ reg_write(glamo, reg, tmp); -+} -+ -+#define GLAMO_LCD_WIDTH_MASK 0x03FF -+#define GLAMO_LCD_HEIGHT_MASK 0x03FF -+#define GLAMO_LCD_PITCH_MASK 0x07FE -+#define GLAMO_LCD_HV_TOTAL_MASK 0x03FF -+#define GLAMO_LCD_HV_RETR_START_MASK 0x03FF -+#define GLAMO_LCD_HV_RETR_END_MASK 0x03FF -+#define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF -+#define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF -+ -+enum orientation { -+ ORIENTATION_PORTRAIT, -+ ORIENTATION_LANDSCAPE -+}; -+ -+ -+/* the caller has to enxure lock_cmd is held and we are in cmd mode */ -+static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation) -+{ -+ int glamo_rot; -+ -+ switch (rotation) { -+ case FB_ROTATE_UR: -+ glamo_rot = GLAMO_LCD_ROT_MODE_0; -+ break; -+ case FB_ROTATE_CW: -+ glamo_rot = GLAMO_LCD_ROT_MODE_90; -+ break; -+ case FB_ROTATE_UD: -+ glamo_rot = GLAMO_LCD_ROT_MODE_180; -+ break; -+ case FB_ROTATE_CCW: -+ glamo_rot = GLAMO_LCD_ROT_MODE_270; -+ break; -+ default: -+ glamo_rot = GLAMO_LCD_ROT_MODE_0; -+ break; -+ } -+ -+ reg_set_bit_mask(glamo, -+ GLAMO_REG_LCD_WIDTH, -+ GLAMO_LCD_ROT_MODE_MASK, -+ glamo_rot); -+ reg_set_bit_mask(glamo, -+ GLAMO_REG_LCD_MODE1, -+ GLAMO_LCD_MODE1_ROTATE_EN, -+ (glamo_rot != GLAMO_LCD_ROT_MODE_0)? -+ GLAMO_LCD_MODE1_ROTATE_EN : 0); -+} -+ -+static enum orientation get_orientation(struct fb_var_screeninfo *var) -+{ -+ if (var->xres <= var->yres) -+ return ORIENTATION_PORTRAIT; -+ -+ return ORIENTATION_LANDSCAPE; -+} -+ -+static int will_orientation_change(struct fb_var_screeninfo *var) -+{ -+ enum orientation orient = get_orientation(var); -+ -+ switch (orient) { -+ case ORIENTATION_LANDSCAPE: -+ if (var->rotate == FB_ROTATE_UR || -+ var->rotate == FB_ROTATE_UD) -+ return 1; -+ break; -+ case ORIENTATION_PORTRAIT: -+ if (var->rotate == FB_ROTATE_CW || -+ var->rotate == FB_ROTATE_CCW) -+ return 1; -+ break; -+ } -+ return 0; -+} -+ -+static void glamofb_update_lcd_controller(struct glamofb_handle *glamo, -+ struct fb_var_screeninfo *var) -+{ -+ int sync, bp, disp, fp, total, xres, yres, pitch, orientation_changing; -+ unsigned long flags; -+ -+ if (!glamo || !var) -+ return; -+ -+ spin_lock_irqsave(&glamo->lock_cmd, flags); -+ -+ if (glamofb_cmd_mode(glamo, 1)) -+ goto out_unlock; -+ -+ if (var->pixclock) -+ glamo_engine_reclock(glamo->mach_info->glamo, -+ GLAMO_ENGINE_LCD, -+ var->pixclock); -+ -+ xres = var->xres; -+ yres = var->yres; -+ -+ /* figure out if orientation is going to change */ -+ orientation_changing = will_orientation_change(var); -+ -+ /* adjust the pitch according to new orientation to come */ -+ if (orientation_changing) { -+ pitch = var->yres * var->bits_per_pixel / 8; -+ } else { -+ pitch = var->xres * var->bits_per_pixel / 8; -+ } -+ -+ /* set the awaiten LCD geometry */ -+ reg_set_bit_mask(glamo, -+ GLAMO_REG_LCD_WIDTH, -+ GLAMO_LCD_WIDTH_MASK, -+ xres); -+ reg_set_bit_mask(glamo, -+ GLAMO_REG_LCD_HEIGHT, -+ GLAMO_LCD_HEIGHT_MASK, -+ yres); -+ reg_set_bit_mask(glamo, -+ GLAMO_REG_LCD_PITCH, -+ GLAMO_LCD_PITCH_MASK, -+ pitch); -+ -+ /* honour the rotation request */ -+ __rotate_lcd(glamo, var->rotate); -+ -+ /* update the reported geometry of the framebuffer. */ -+ if (orientation_changing) { -+ var->xres_virtual = var->xres = yres; -+ var->yres_virtual = var->yres = xres; -+ } else { -+ var->xres_virtual = var->xres = xres; -+ var->yres_virtual = var->yres = yres; -+ } -+ -+ /* update scannout timings */ -+ sync = 0; -+ bp = sync + var->hsync_len; -+ disp = bp + var->left_margin; -+ fp = disp + xres; -+ total = fp + var->right_margin; -+ -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_TOTAL, -+ GLAMO_LCD_HV_TOTAL_MASK, total); -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_RETR_START, -+ GLAMO_LCD_HV_RETR_START_MASK, sync); -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_RETR_END, -+ GLAMO_LCD_HV_RETR_END_MASK, bp); -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_DISP_START, -+ GLAMO_LCD_HV_RETR_DISP_START_MASK, disp); -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_DISP_END, -+ GLAMO_LCD_HV_RETR_DISP_END_MASK, fp); -+ -+ sync = 0; -+ bp = sync + var->vsync_len; -+ disp = bp + var->upper_margin; -+ fp = disp + yres; -+ total = fp + var->lower_margin; -+ -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_TOTAL, -+ GLAMO_LCD_HV_TOTAL_MASK, total); -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_RETR_START, -+ GLAMO_LCD_HV_RETR_START_MASK, sync); -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_RETR_END, -+ GLAMO_LCD_HV_RETR_END_MASK, bp); -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_DISP_START, -+ GLAMO_LCD_HV_RETR_DISP_START_MASK, disp); -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_DISP_END, -+ GLAMO_LCD_HV_RETR_DISP_END_MASK, fp); -+ -+ glamofb_cmd_mode(glamo, 0); -+ -+out_unlock: -+ spin_unlock_irqrestore(&glamo->lock_cmd, flags); -+} -+ -+static int glamofb_set_par(struct fb_info *info) -+{ -+ struct glamofb_handle *glamo = info->par; -+ struct fb_var_screeninfo *var = &info->var; -+ -+ switch (var->bits_per_pixel) { -+ case 16: -+ info->fix.visual = FB_VISUAL_TRUECOLOR; -+ break; -+ default: -+ printk("Smedia driver doesn't support != 16bpp\n"); -+ return -EINVAL; -+ } -+ -+ info->fix.line_length = (var->xres * var->bits_per_pixel) / 8; -+ -+ glamofb_update_lcd_controller(glamo, var); -+ -+ return 0; -+} -+ -+static int glamofb_blank(int blank_mode, struct fb_info *info) -+{ -+ struct glamofb_handle *gfb = info->par; -+ struct glamo_core *gcore = gfb->mach_info->glamo; -+ -+ dev_dbg(gfb->dev, "glamofb_blank(%u)\n", blank_mode); -+ -+ switch (blank_mode) { -+ case FB_BLANK_VSYNC_SUSPEND: -+ case FB_BLANK_HSYNC_SUSPEND: -+ /* FIXME: add pdata hook/flag to indicate whether -+ * we should already switch off pixel clock here */ -+ break; -+ case FB_BLANK_POWERDOWN: -+ /* disable the pixel clock */ -+ glamo_engine_clkreg_set(gcore, GLAMO_ENGINE_LCD, -+ GLAMO_CLOCK_LCD_EN_DCLK, 0); -+ break; -+ case FB_BLANK_UNBLANK: -+ case FB_BLANK_NORMAL: -+ /* enable the pixel clock */ -+ glamo_engine_clkreg_set(gcore, GLAMO_ENGINE_LCD, -+ GLAMO_CLOCK_LCD_EN_DCLK, -+ GLAMO_CLOCK_LCD_EN_DCLK); -+ break; -+ } -+ -+ /* FIXME: once we have proper clock management in glamo-core, -+ * we can determine if other units need MCLK1 or the PLL, and -+ * disable it if not used. */ -+ return 0; -+} -+ -+static inline unsigned int chan_to_field(unsigned int chan, -+ struct fb_bitfield *bf) -+{ -+ chan &= 0xffff; -+ chan >>= 16 - bf->length; -+ return chan << bf->offset; -+} -+ -+static int glamofb_setcolreg(unsigned regno, -+ unsigned red, unsigned green, unsigned blue, -+ unsigned transp, struct fb_info *info) -+{ -+ struct glamofb_handle *glamo = info->par; -+ unsigned int val; -+ -+ switch (glamo->fb->fix.visual) { -+ case FB_VISUAL_TRUECOLOR: -+ case FB_VISUAL_DIRECTCOLOR: -+ /* true-colour, use pseuo-palette */ -+ -+ if (regno < 16) { -+ u32 *pal = glamo->fb->pseudo_palette; -+ -+ val = chan_to_field(red, &glamo->fb->var.red); -+ val |= chan_to_field(green, &glamo->fb->var.green); -+ val |= chan_to_field(blue, &glamo->fb->var.blue); -+ -+ pal[regno] = val; -+ }; -+ break; -+ default: -+ return 1; /* unknown type */ -+ } -+ -+ return 0; -+} -+ -+#ifdef CONFIG_MFD_GLAMO_HWACCEL -+static inline void glamofb_vsync_wait(struct glamofb_handle *glamo, -+ int line, int size, int range) -+{ -+ int count[2]; -+ -+ do { -+ count[0] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff; -+ count[1] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff; -+ } while (count[0] != count[1] || -+ (line < count[0] + range && -+ size > count[0] - range) || -+ count[0] < range * 2); -+} -+ -+/* -+ * Enable/disable the hardware cursor mode altogether -+ * (for blinking and such, use glamofb_cursor()). -+ */ -+static void glamofb_cursor_onoff(struct glamofb_handle *glamo, int on) -+{ -+ int y, size; -+ -+ if (glamo->cursor_on) { -+ y = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_POS); -+ size = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE); -+ -+ glamofb_vsync_wait(glamo, y, size, 30); -+ } -+ -+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1, -+ GLAMO_LCD_MODE1_CURSOR_EN, -+ on ? GLAMO_LCD_MODE1_CURSOR_EN : 0); -+ glamo->cursor_on = on; -+ -+ /* Hide the cursor by default */ -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, 0); -+} -+ -+static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor) -+{ -+ struct glamofb_handle *glamo = info->par; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&glamo->lock_cmd, flags); -+ -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, -+ cursor->enable ? cursor->image.width : 0); -+ -+ if (cursor->set & FB_CUR_SETPOS) { -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS, -+ cursor->image.dx); -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_POS, -+ cursor->image.dy); -+ } -+ -+ if (cursor->set & FB_CUR_SETCMAP) { -+ uint16_t fg = glamo->pseudo_pal[cursor->image.fg_color]; -+ uint16_t bg = glamo->pseudo_pal[cursor->image.bg_color]; -+ -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_FG_COLOR, fg); -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_BG_COLOR, bg); -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_DST_COLOR, fg); -+ } -+ -+ if (cursor->set & FB_CUR_SETHOT) -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_PRESET, -+ (cursor->hot.x << 8) | cursor->hot.y); -+ -+ if ((cursor->set & FB_CUR_SETSIZE) || -+ (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE))) { -+ int x, y, pitch, op; -+ const uint8_t *pcol = cursor->image.data; -+ const uint8_t *pmsk = cursor->mask; -+ uint8_t __iomem *dst = glamo->cursor_addr; -+ uint8_t dcol = 0; -+ uint8_t dmsk = 0; -+ uint8_t byte = 0; -+ -+ if (cursor->image.depth > 1) { -+ spin_unlock_irqrestore(&glamo->lock_cmd, flags); -+ return -EINVAL; -+ } -+ -+ pitch = ((cursor->image.width + 7) >> 2) & ~1; -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH, -+ pitch); -+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE, -+ cursor->image.height); -+ -+ for (y = 0; y < cursor->image.height; y++) { -+ byte = 0; -+ for (x = 0; x < cursor->image.width; x++) { -+ if ((x % 8) == 0) { -+ dcol = *pcol++; -+ dmsk = *pmsk++; -+ } else { -+ dcol >>= 1; -+ dmsk >>= 1; -+ } -+ -+ if (cursor->rop == ROP_COPY) -+ op = (dmsk & 1) ? -+ (dcol & 1) ? 1 : 3 : 0; -+ else -+ op = ((dmsk & 1) << 1) | -+ ((dcol & 1) << 0); -+ byte |= op << ((x & 3) << 1); -+ -+ if (x % 4 == 3) { -+ writeb(byte, dst + x / 4); -+ byte = 0; -+ } -+ } -+ if (x % 4) { -+ writeb(byte, dst + x / 4); -+ byte = 0; -+ } -+ -+ dst += pitch; -+ } -+ } -+ -+ spin_unlock_irqrestore(&glamo->lock_cmd, flags); -+ -+ return 0; -+} -+#endif -+ -+static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb) -+{ -+ /* DGCMdQempty -- 1 == command queue is empty */ -+ return reg_read(gfb, GLAMO_REG_LCD_STATUS1) & (1 << 15); -+} -+ -+/* call holding gfb->lock_cmd when locking, until you unlock */ -+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on) -+{ -+ int timeout = 200000; -+ -+ dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on); -+ if (on) { -+ dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ", -+ __FUNCTION__); -+ while ((!glamofb_cmdq_empty(gfb)) && (timeout--)) -+ yield(); -+ if (timeout < 0) { -+ printk(KERN_ERR"*************" -+ "glamofb cmd_queue never got empty" -+ "*************\n"); -+ return -EIO; -+ } -+ dev_dbg(gfb->dev, "empty!\n"); -+ -+ /* display the entire frame then switch to command */ -+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1, -+ GLAMO_LCD_CMD_TYPE_DISP | -+ GLAMO_LCD_CMD_DATA_FIRE_VSYNC); -+ -+ /* wait until LCD is idle */ -+ dev_dbg(gfb->dev, "waiting for LCD idle: "); -+ timeout = 200000; -+ while ((!reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12)) && -+ (timeout--)) -+ yield(); -+ if (timeout < 0) { -+ printk(KERN_ERR"*************" -+ "glamofb lcd never idle" -+ "*************\n"); -+ return -EIO; -+ } -+ dev_dbg(gfb->dev, "idle!\n"); -+ -+ mdelay(100); -+ } else { -+ /* RGB interface needs vsync/hsync */ -+ if (reg_read(gfb, GLAMO_REG_LCD_MODE3) & GLAMO_LCD_MODE3_RGB) -+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1, -+ GLAMO_LCD_CMD_TYPE_DISP | -+ GLAMO_LCD_CMD_DATA_DISP_SYNC); -+ -+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1, -+ GLAMO_LCD_CMD_TYPE_DISP | -+ GLAMO_LCD_CMD_DATA_DISP_FIRE); -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(glamofb_cmd_mode); -+ -+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val) -+{ -+ int timeout = 200000; -+ -+ dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n", __FUNCTION__); -+ while ((!glamofb_cmdq_empty(gfb)) && (timeout--)) -+ yield(); -+ if (timeout < 0) { -+ printk(KERN_ERR"*************" -+ "glamofb cmd_queue never got empty" -+ "*************\n"); -+ return 1; -+ } -+ dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val); -+ -+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1, val); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(glamofb_cmd_write); -+ -+static struct fb_ops glamofb_ops = { -+ .owner = THIS_MODULE, -+ .fb_check_var = glamofb_check_var, -+ .fb_set_par = glamofb_set_par, -+ .fb_blank = glamofb_blank, -+ .fb_setcolreg = glamofb_setcolreg, -+#ifdef CONFIG_MFD_GLAMO_HWACCEL -+ .fb_cursor = glamofb_cursor, -+#endif -+ .fb_fillrect = cfb_fillrect, -+ .fb_copyarea = cfb_copyarea, -+ .fb_imageblit = cfb_imageblit, -+}; -+ -+static int glamofb_init_regs(struct glamofb_handle *glamo) -+{ -+ struct fb_info *info = glamo->fb; -+ -+ glamofb_check_var(&info->var, info); -+ glamofb_run_script(glamo, glamo_regs, ARRAY_SIZE(glamo_regs)); -+ glamofb_set_par(info); -+ -+ return 0; -+} -+ -+static int __init glamofb_probe(struct platform_device *pdev) -+{ -+ int rc = -EIO; -+ struct fb_info *fbinfo; -+ struct glamofb_handle *glamofb; -+ struct glamofb_platform_data *mach_info = pdev->dev.platform_data; -+ -+ printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 " -+ "Openmoko, Inc.\n"); -+ -+ fbinfo = framebuffer_alloc(sizeof(struct glamofb_handle), &pdev->dev); -+ if (!fbinfo) -+ return -ENOMEM; -+ -+ glamofb = fbinfo->par; -+ glamofb->fb = fbinfo; -+ glamofb->dev = &pdev->dev; -+ -+ strcpy(fbinfo->fix.id, "SMedia Glamo"); -+ -+ glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "glamo-fb-regs"); -+ if (!glamofb->reg) { -+ dev_err(&pdev->dev, "platform device with no registers?\n"); -+ rc = -ENOENT; -+ goto out_free; -+ } -+ -+ glamofb->fb_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "glamo-fb-mem"); -+ if (!glamofb->fb_res) { -+ dev_err(&pdev->dev, "platform device with no memory ?\n"); -+ rc = -ENOENT; -+ goto out_free; -+ } -+ -+ glamofb->reg = request_mem_region(glamofb->reg->start, -+ RESSIZE(glamofb->reg), pdev->name); -+ if (!glamofb->reg) { -+ dev_err(&pdev->dev, "failed to request mmio region\n"); -+ goto out_free; -+ } -+ -+ glamofb->fb_res = request_mem_region(glamofb->fb_res->start, -+ mach_info->fb_mem_size, -+ pdev->name); -+ if (!glamofb->fb_res) { -+ dev_err(&pdev->dev, "failed to request vram region\n"); -+ goto out_release_reg; -+ } -+ -+ /* we want to remap only the registers required for this core -+ * driver. */ -+ glamofb->base = ioremap(glamofb->reg->start, RESSIZE(glamofb->reg)); -+ if (!glamofb->base) { -+ dev_err(&pdev->dev, "failed to ioremap() mmio memory\n"); -+ goto out_release_fb; -+ } -+ fbinfo->fix.smem_start = (unsigned long) glamofb->fb_res->start; -+ fbinfo->fix.smem_len = mach_info->fb_mem_size; -+ -+ fbinfo->screen_base = ioremap(glamofb->fb_res->start, -+ RESSIZE(glamofb->fb_res)); -+ if (!fbinfo->screen_base) { -+ dev_err(&pdev->dev, "failed to ioremap() vram memory\n"); -+ goto out_release_fb; -+ } -+ glamofb->cursor_addr = fbinfo->screen_base + 0xf0000; -+ -+ platform_set_drvdata(pdev, fbinfo); -+ -+ glamofb->mach_info = pdev->dev.platform_data; -+ -+ fbinfo->fix.visual = FB_VISUAL_TRUECOLOR; -+ fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; -+ fbinfo->fix.type_aux = 0; -+ fbinfo->fix.xpanstep = 0; -+ fbinfo->fix.ypanstep = 0; -+ fbinfo->fix.ywrapstep = 0; -+ fbinfo->fix.accel = FB_ACCEL_GLAMO; -+ -+ fbinfo->var.nonstd = 0; -+ fbinfo->var.activate = FB_ACTIVATE_NOW; -+ fbinfo->var.height = mach_info->height; -+ fbinfo->var.width = mach_info->width; -+ fbinfo->var.accel_flags = 0; /* FIXME */ -+ fbinfo->var.vmode = FB_VMODE_NONINTERLACED; -+ -+ fbinfo->fbops = &glamofb_ops; -+ fbinfo->flags = FBINFO_FLAG_DEFAULT; -+ fbinfo->pseudo_palette = &glamofb->pseudo_pal; -+ -+ fbinfo->var.xres = mach_info->xres.defval; -+ fbinfo->var.xres_virtual = mach_info->xres.defval; -+ fbinfo->var.yres = mach_info->yres.defval; -+ fbinfo->var.yres_virtual = mach_info->yres.defval; -+ fbinfo->var.bits_per_pixel = mach_info->bpp.defval; -+ -+ fbinfo->var.pixclock = mach_info->pixclock; -+ fbinfo->var.left_margin = mach_info->left_margin; -+ fbinfo->var.right_margin = mach_info->right_margin; -+ fbinfo->var.upper_margin = mach_info->upper_margin; -+ fbinfo->var.lower_margin = mach_info->lower_margin; -+ fbinfo->var.hsync_len = mach_info->hsync_len; -+ fbinfo->var.vsync_len = mach_info->vsync_len; -+ -+ memset(fbinfo->screen_base, 0, fbinfo->fix.smem_len); -+ -+ glamo_engine_enable(mach_info->glamo, GLAMO_ENGINE_LCD); -+ glamo_engine_reset(mach_info->glamo, GLAMO_ENGINE_LCD); -+ -+ spin_lock_init(&glamofb->lock_cmd); -+ glamofb_init_regs(glamofb); -+#ifdef CONFIG_MFD_GLAMO_HWACCEL -+ glamofb_cursor_onoff(glamofb, 1); -+#endif -+ -+ rc = register_framebuffer(fbinfo); -+ if (rc < 0) { -+ dev_err(&pdev->dev, "failed to register framebuffer\n"); -+ goto out_unmap_fb; -+ } -+ -+ if (mach_info->spi_info) { -+ /* register the sibling spi device */ -+ mach_info->spi_info->glamofb_handle = glamofb; -+ glamo_spi_dev.dev.parent = &pdev->dev; -+ glamo_spi_dev.dev.platform_data = mach_info->spi_info; -+ platform_device_register(&glamo_spi_dev); -+ } -+ -+ printk(KERN_INFO "fb%d: %s frame buffer device\n", -+ fbinfo->node, fbinfo->fix.id); -+ -+ return 0; -+ -+out_unmap_fb: -+ iounmap(fbinfo->screen_base); -+ iounmap(glamofb->base); -+out_release_fb: -+ release_mem_region(glamofb->fb_res->start, RESSIZE(glamofb->fb_res)); -+out_release_reg: -+ release_mem_region(glamofb->reg->start, RESSIZE(glamofb->reg)); -+out_free: -+ framebuffer_release(fbinfo); -+ return rc; -+} -+ -+static int glamofb_remove(struct platform_device *pdev) -+{ -+ struct glamofb_handle *glamofb = platform_get_drvdata(pdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ iounmap(glamofb->base); -+ release_mem_region(glamofb->reg->start, RESSIZE(glamofb->reg)); -+ kfree(glamofb); -+ -+ return 0; -+} -+ -+static struct platform_driver glamofb_driver = { -+ .probe = glamofb_probe, -+ .remove = glamofb_remove, -+ .driver = { -+ .name = "glamo-fb", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __devinit glamofb_init(void) -+{ -+ return platform_driver_register(&glamofb_driver); -+} -+ -+static void __exit glamofb_cleanup(void) -+{ -+ platform_driver_unregister(&glamofb_driver); -+} -+ -+module_init(glamofb_init); -+module_exit(glamofb_cleanup); -+ -+MODULE_AUTHOR("Harald Welte "); -+MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/mfd/glamo/glamo-gpio.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/glamo-gpio.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,62 @@ -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include "glamo-core.h" -+#include "glamo-regs.h" -+ -+void glamo_gpio_setpin(struct glamo_core *glamo, unsigned int pin, -+ unsigned int value) -+{ -+ unsigned int reg = REG_OF_GPIO(pin); -+ u_int16_t tmp; -+ -+ spin_lock(&glamo->lock); -+ tmp = readw(glamo->base + reg); -+ if (value) -+ tmp |= OUTPUT_BIT(pin); -+ else -+ tmp &= ~OUTPUT_BIT(pin); -+ writew(tmp, glamo->base + reg); -+ spin_unlock(&glamo->lock); -+} -+EXPORT_SYMBOL(glamo_gpio_setpin); -+ -+int glamo_gpio_getpin(struct glamo_core *glamo, unsigned int pin) -+{ -+ return readw(REG_OF_GPIO(pin)) & INPUT_BIT(pin) ? 1 : 0; -+} -+EXPORT_SYMBOL(glamo_gpio_getpin); -+ -+void glamo_gpio_cfgpin(struct glamo_core *glamo, unsigned int pinfunc) -+{ -+ unsigned int reg = REG_OF_GPIO(pinfunc); -+ u_int16_t tmp; -+ -+ spin_lock(&glamo->lock); -+ tmp = readw(glamo->base + reg); -+ -+ if ((pinfunc & 0x00f0) == GLAMO_GPIO_F_FUNC) { -+ /* pin is a function pin: clear gpio bit */ -+ tmp &= ~FUNC_BIT(pinfunc); -+ } else { -+ /* pin is gpio: set gpio bit */ -+ tmp |= FUNC_BIT(pinfunc); -+ -+ if (pinfunc & GLAMO_GPIO_F_IN) { -+ /* gpio input: set bit to disable output mode */ -+ tmp |= GPIO_OUT_BIT(pinfunc); -+ } else if (pinfunc & GLAMO_GPIO_F_OUT) { -+ /* gpio output: clear bit to enable output mode */ -+ tmp &= ~GPIO_OUT_BIT(pinfunc); -+ } -+ } -+ writew(tmp, glamo->base + reg); -+ spin_unlock(&glamo->lock); -+} -+EXPORT_SYMBOL(glamo_gpio_cfgpin); -+ -Index: linux-2.6.24.7/drivers/mfd/glamo/glamo-lcm-spi.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/glamo-lcm-spi.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,240 @@ -+/* -+ * Copyright (C) 2007 Openmoko, Inc. -+ * Author: Harald Welte -+ * -+ * Smedia Glamo GPIO based SPI driver -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This driver currently only implements a minimum subset of the hardware -+ * features, esp. those features that are required to drive the jbt6k74 -+ * LCM controller asic in the TD028TTEC1 LCM. -+ * -+*/ -+ -+#define DEBUG -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+#include "glamo-core.h" -+#include "glamo-regs.h" -+ -+struct glamo_spi { -+ struct spi_bitbang bitbang; -+ struct spi_master *master; -+ struct glamo_spi_info *info; -+ struct device *dev; -+}; -+ -+static inline struct glamo_spi *to_gs(struct spi_device *spi) -+{ -+ return spi->controller_data; -+} -+ -+static int glamo_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) -+{ -+ unsigned int bpw; -+ -+ bpw = t ? t->bits_per_word : spi->bits_per_word; -+ -+ if (bpw != 9 && bpw != 8) { -+ dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static void glamo_spi_chipsel(struct spi_device *spi, int value) -+{ -+#if 0 -+ struct glamo_spi *gs = to_gs(spi); -+ -+ dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n", -+ value, spi, gs, gs->info, gs->info->glamofb_handle); -+ -+ glamofb_cmd_mode(gs->info->glamofb_handle, value); -+#endif -+} -+ -+static int glamo_spi_txrx(struct spi_device *spi, struct spi_transfer *t) -+{ -+ struct glamo_spi *gs = to_gs(spi); -+ const u_int16_t *ui16 = (const u_int16_t *) t->tx_buf; -+ u_int16_t nine_bits; -+ int i; -+ -+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, bpw %d, len %d\n", -+ t->tx_buf, t->rx_buf, t->bits_per_word, t->len); -+ -+ if (spi->bits_per_word == 9) -+ nine_bits = (1 << 9); -+ else -+ nine_bits = 0; -+ -+ if (t->len > 3 * sizeof(u_int16_t)) { -+ dev_err(&spi->dev, "this driver doesn't support " -+ "%u sized xfers\n", t->len); -+ return -EINVAL; -+ } -+ -+ for (i = 0; i < t->len/sizeof(u_int16_t); i++) { -+ /* actually transfer the data */ -+#if 1 -+ glamofb_cmd_write(gs->info->glamofb_handle, -+ GLAMO_LCD_CMD_TYPE_SERIAL | nine_bits | -+ (1 << 10) | (1 << 11) | (ui16[i] & 0x1ff)); -+#endif -+ /* FIXME: fire ?!? */ -+ if (i == 0 && (ui16[i] & 0x1ff) == 0x29) { -+ dev_dbg(&spi->dev, "leaving command mode\n"); -+ glamofb_cmd_mode(gs->info->glamofb_handle, 0); -+ } -+ } -+ -+ return t->len; -+} -+ -+static int glamo_spi_setup(struct spi_device *spi) -+{ -+ int ret; -+ -+ if (!spi->bits_per_word) -+ spi->bits_per_word = 9; -+ -+ /* FIXME: hardware can do this */ -+ if (spi->mode & SPI_LSB_FIRST) -+ return -EINVAL; -+ -+ ret = glamo_spi_setupxfer(spi, NULL); -+ if (ret < 0) { -+ dev_err(&spi->dev, "setupxfer returned %d\n", ret); -+ return ret; -+ } -+ -+ dev_dbg(&spi->dev, "%s: mode %d, %u bpw\n", -+ __FUNCTION__, spi->mode, spi->bits_per_word); -+ -+ return 0; -+} -+ -+static int glamo_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct glamo_spi *sp; -+ int ret; -+ int i; -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spi)); -+ if (master == NULL) { -+ dev_err(&pdev->dev, "failed to allocate spi master\n"); -+ ret = -ENOMEM; -+ goto err; -+ } -+ -+ sp = spi_master_get_devdata(master); -+ memset(sp, 0, sizeof(struct glamo_spi)); -+ -+ sp->master = spi_master_get(master); -+ sp->info = pdev->dev.platform_data; -+ if (!sp->info) { -+ dev_err(&pdev->dev, "can't operate without platform data\n"); -+ ret = -EIO; -+ goto err_no_pdev; -+ } -+ dev_dbg(&pdev->dev, "sp->info(pdata) = %p\n", sp->info); -+ -+ sp->dev = &pdev->dev; -+ -+ platform_set_drvdata(pdev, sp); -+ -+ sp->bitbang.master = sp->master; -+ sp->bitbang.setup_transfer = glamo_spi_setupxfer; -+ sp->bitbang.chipselect = glamo_spi_chipsel; -+ sp->bitbang.txrx_bufs = glamo_spi_txrx; -+ sp->bitbang.master->setup = glamo_spi_setup; -+ -+ ret = spi_bitbang_start(&sp->bitbang); -+ if (ret) -+ goto err_no_bitbang; -+ -+ /* register the chips to go with the board */ -+ -+ glamofb_cmd_mode(sp->info->glamofb_handle, 1); -+ -+ for (i = 0; i < sp->info->board_size; i++) { -+ dev_info(&pdev->dev, "registering %p: %s\n", -+ &sp->info->board_info[i], -+ sp->info->board_info[i].modalias); -+ -+ sp->info->board_info[i].controller_data = sp; -+ spi_new_device(master, sp->info->board_info + i); -+ } -+ -+ return 0; -+ -+err_no_bitbang: -+ platform_set_drvdata(pdev, NULL); -+err_no_pdev: -+ spi_master_put(sp->bitbang.master); -+err: -+ return ret; -+ -+} -+ -+static int glamo_spi_remove(struct platform_device *pdev) -+{ -+ struct glamo_spi *sp = platform_get_drvdata(pdev); -+ -+ spi_bitbang_stop(&sp->bitbang); -+ spi_master_put(sp->bitbang.master); -+ -+ return 0; -+} -+ -+#define glamo_spi_suspend NULL -+#define glamo_spi_resume NULL -+ -+static struct platform_driver glamo_spi_drv = { -+ .probe = glamo_spi_probe, -+ .remove = glamo_spi_remove, -+ .suspend = glamo_spi_suspend, -+ .resume = glamo_spi_resume, -+ .driver = { -+ .name = "glamo-lcm-spi", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init glamo_spi_init(void) -+{ -+ return platform_driver_register(&glamo_spi_drv); -+} -+ -+static void __exit glamo_spi_exit(void) -+{ -+ platform_driver_unregister(&glamo_spi_drv); -+} -+ -+module_init(glamo_spi_init); -+module_exit(glamo_spi_exit); -+ -+MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver"); -+MODULE_AUTHOR("Harald Welte ") -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/mfd/glamo/glamo-mci.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/glamo-mci.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,1062 @@ -+/* -+ * linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver -+ * -+ * Copyright (C) 2007 Openmoko, Inc, Andy Green -+ * Based on S3C MMC driver that was: -+ * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include "glamo-mci.h" -+#include "glamo-core.h" -+#include "glamo-regs.h" -+ -+/* from glamo-core.c */ -+extern struct glamo_mci_pdata glamo_mci_def_pdata; -+ -+static spinlock_t clock_lock; -+ -+#define DRIVER_NAME "glamo-mci" -+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start) + 1) -+ -+static void glamo_mci_send_request(struct mmc_host *mmc); -+ -+/* -+ * Max SD clock rate -+ * -+ * held at /(3 + 1) due to concerns of 100R recommended series resistor -+ * allows 16MHz @ 4-bit --> 8MBytes/sec raw -+ * -+ * you can override this on kernel commandline using -+ * -+ * glamo_mci.sd_max_clk=10000000 -+ * -+ * for example -+ */ -+ -+static int sd_max_clk = 50000000 / 3; -+module_param(sd_max_clk, int, 0644); -+ -+/* -+ * Slow SD clock rate -+ * -+ * you can override this on kernel commandline using -+ * -+ * glamo_mci.sd_slow_ratio=8 -+ * -+ * for example -+ * -+ * platform callback is used to decide effective clock rate, if not -+ * defined then max is used, if defined and returns nonzero, rate is -+ * divided by this factor -+ */ -+ -+static int sd_slow_ratio = 8; -+module_param(sd_slow_ratio, int, 0644); -+ -+/* -+ * Post-power SD clock rate -+ * -+ * you can override this on kernel commandline using -+ * -+ * glamo_mci.sd_post_power_clock=1000000 -+ * -+ * for example -+ * -+ * After changing power to card, clock is held at this rate until first bulk -+ * transfer completes -+ */ -+ -+static int sd_post_power_clock = 1000000; -+module_param(sd_post_power_clock, int, 0644); -+ -+ -+/* -+ * SD Signal drive strength -+ * -+ * you can override this on kernel commandline using -+ * -+ * glamo_mci.sd_drive=0 -+ * -+ * for example -+ */ -+ -+static int sd_drive; -+module_param(sd_drive, int, 0644); -+ -+/* -+ * SD allow SD clock to run while idle -+ * -+ * you can override this on kernel commandline using -+ * -+ * glamo_mci.sd_idleclk=0 -+ * -+ * for example -+ */ -+ -+static int sd_idleclk = 0; /* disallow idle clock by default */ -+module_param(sd_idleclk, int, 0644); -+ -+/* used to stash real idleclk state in suspend: we force it to run in there */ -+static int suspend_sd_idleclk; -+ -+ -+unsigned char CRC7(u8 * pu8, int cnt) -+{ -+ u8 crc = 0; -+ -+ while (cnt--) { -+ int n; -+ u8 d = *pu8++; -+ for (n = 0; n < 8; n++) { -+ crc <<= 1; -+ if ((d & 0x80) ^ (crc & 0x80)) -+ crc ^= 0x09; -+ d <<= 1; -+ } -+ } -+ return (crc << 1) | 1; -+} -+ -+/* these _dly versions account for the dead time rules for reg access */ -+static u16 readw_dly(u16 __iomem * pu16) -+{ -+ glamo_reg_access_delay(); -+ return readw(pu16); -+} -+ -+static void writew_dly(u16 val, u16 __iomem * pu16) -+{ -+ glamo_reg_access_delay(); -+ writew(val, pu16); -+} -+ -+static int get_data_buffer(struct glamo_mci_host *host, -+ volatile u32 *words, volatile u16 **pointer) -+{ -+ struct scatterlist *sg; -+ -+ *words = 0; -+ *pointer = NULL; -+ -+ if (host->pio_active == XFER_NONE) -+ return -EINVAL; -+ -+ if ((!host->mrq) || (!host->mrq->data)) -+ return -EINVAL; -+ -+ if (host->pio_sgptr >= host->mrq->data->sg_len) { -+ dev_dbg(&host->pdev->dev, "no more buffers (%i/%i)\n", -+ host->pio_sgptr, host->mrq->data->sg_len); -+ return -EBUSY; -+ } -+ sg = &host->mrq->data->sg[host->pio_sgptr]; -+ -+ *words = sg->length >> 1; /* we are working with a 16-bit data bus */ -+ *pointer = page_address(sg_page(sg)) + sg->offset; -+ -+ BUG_ON(((long)(*pointer)) & 1); -+ -+ host->pio_sgptr++; -+ -+ /* dev_info(&host->pdev->dev, "new buffer (%i/%i)\n", -+ host->pio_sgptr, host->mrq->data->sg_len); */ -+ return 0; -+} -+ -+static void do_pio_read(struct glamo_mci_host *host) -+{ -+ int res; -+ u16 __iomem *from_ptr = host->base_data + (RESSIZE(host->mem_data) / -+ sizeof(u16) / 2); -+#ifdef DEBUG -+ u16 * block; -+#endif -+ -+ while (1) { -+ res = get_data_buffer(host, &host->pio_words, &host->pio_ptr); -+ if (res) { -+ host->pio_active = XFER_NONE; -+ host->complete_what = COMPLETION_FINALIZE; -+ -+ dev_dbg(&host->pdev->dev, "pio_read(): " -+ "complete (no more data).\n"); -+ return; -+ } -+ -+ dev_dbg(&host->pdev->dev, "pio_read(): host->pio_words: %d\n", -+ host->pio_words); -+ -+ host->pio_count += host->pio_words << 1; -+ -+#ifdef DEBUG -+ block = (u16 *)host->pio_ptr; -+ res = host->pio_words << 1; -+#endif -+ while (host->pio_words--) -+ *host->pio_ptr++ = *from_ptr++; -+#ifdef DEBUG -+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, -+ (void *)block, res, 1); -+#endif -+ } -+} -+ -+static int do_pio_write(struct glamo_mci_host *host) -+{ -+ int res = 0; -+ volatile u16 __iomem *to_ptr = host->base_data; -+ int err = 0; -+ -+ dev_dbg(&host->pdev->dev, "pio_write():\n"); -+ while (!res) { -+ res = get_data_buffer(host, &host->pio_words, &host->pio_ptr); -+ if (res) -+ continue; -+ -+ dev_dbg(&host->pdev->dev, "pio_write():new source: [%i]@[%p]\n", -+ host->pio_words, host->pio_ptr); -+ -+ host->pio_count += host->pio_words << 1; -+ while (host->pio_words--) -+ writew(*host->pio_ptr++, to_ptr++); -+ } -+ -+ dev_dbg(&host->pdev->dev, "pio_write(): complete\n"); -+ host->pio_active = XFER_NONE; -+ return err; -+} -+ -+static void __glamo_mci_fix_card_div(struct glamo_mci_host *host, int div) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&clock_lock, flags); -+ -+ if (div < 0) { -+ /* stop clock - remove clock from divider input */ -+ writew(readw(glamo_mci_def_pdata.pglamo->base + -+ GLAMO_REG_CLOCK_GEN5_1) & (~GLAMO_CLOCK_GEN51_EN_DIV_TCLK), -+ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1); -+ -+ goto done; -+ } -+ -+ if (host->force_slow_during_powerup) -+ div = host->clk_rate / sd_post_power_clock; -+ else -+ if (host->pdata->glamo_mci_use_slow) -+ if ((host->pdata->glamo_mci_use_slow)()) -+ div = div * sd_slow_ratio; -+ -+ if (div > 255) -+ div = 255; -+ -+ /* -+ * set the nearest prescaler factor -+ * -+ * register shared with SCLK divisor -- no chance of race because -+ * we don't use sensor interface -+ */ -+ writew_dly((readw(glamo_mci_def_pdata.pglamo->base + -+ GLAMO_REG_CLOCK_GEN8) & 0xff00) | div, -+ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8); -+ /* enable clock to divider input */ -+ writew_dly(readw(glamo_mci_def_pdata.pglamo->base + -+ GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK, -+ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1); -+ -+done: -+ spin_unlock_irqrestore(&clock_lock, flags); -+} -+ -+static int __glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq, -+ int *division) -+{ -+ int div = 0; -+ int real_rate = 0; -+ -+ if (freq) { -+ /* Set clock */ -+ for (div = 0; div < 256; div++) { -+ real_rate = host->clk_rate / (div + 1); -+ if (real_rate <= freq) -+ break; -+ } -+ if (div > 255) -+ div = 255; -+ -+ if (division) -+ *division = div; -+ -+ __glamo_mci_fix_card_div(host, div); -+ -+ } else { -+ /* stop clock */ -+ if (division) -+ *division = 0xff; -+ -+ if (!sd_idleclk && !host->force_slow_during_powerup) -+ /* clock off */ -+ __glamo_mci_fix_card_div(host, -1); -+ } -+ -+ return real_rate; -+} -+ -+static void glamo_mci_irq(unsigned int irq, struct irq_desc *desc) -+{ -+ struct glamo_mci_host *host = (struct glamo_mci_host *) -+ desc->handler_data; -+ u16 status; -+ struct mmc_command *cmd; -+ unsigned long iflags; -+ -+ if (!host) -+ return; -+ if (!host->mrq) -+ return; -+ cmd = host->mrq->cmd; -+ if (!cmd) -+ return; -+ -+ spin_lock_irqsave(&host->complete_lock, iflags); -+ -+ status = readw_dly(host->base + GLAMO_REG_MMC_RB_STAT1); -+ -+ /* ack this interrupt source */ -+ writew(GLAMO_IRQ_MMC, -+ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_IRQ_CLEAR); -+ -+ if (status & (GLAMO_STAT1_MMC_RTOUT | -+ GLAMO_STAT1_MMC_DTOUT)) -+ cmd->error = -ETIMEDOUT; -+ if (status & (GLAMO_STAT1_MMC_BWERR | -+ GLAMO_STAT1_MMC_BRERR)) -+ cmd->error = -EILSEQ; -+ if (cmd->error) { -+ dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status); -+ goto done; -+ } -+ -+ /* disable the initial slow start after first bulk transfer */ -+ if (host->force_slow_during_powerup) -+ host->force_slow_during_powerup--; -+ -+ if (host->pio_active == XFER_READ) -+ do_pio_read(host); -+ -+ host->mrq->data->bytes_xfered = host->pio_count; -+ dev_dbg(&host->pdev->dev, "status = 0x%04x count=%d\n", -+ status, host->pio_count); -+ -+ /* issue STOP if we have been given one to use */ -+ if (host->mrq->stop) { -+ host->cmd_is_stop = 1; -+ glamo_mci_send_request(host->mmc); -+ host->cmd_is_stop = 0; -+ } -+ -+ if (!sd_idleclk && !host->force_slow_during_powerup) -+ /* clock off */ -+ __glamo_mci_fix_card_div(host, -1); -+ -+done: -+ host->complete_what = COMPLETION_NONE; -+ host->mrq = NULL; -+ mmc_request_done(host->mmc, cmd->mrq); -+ spin_unlock_irqrestore(&host->complete_lock, iflags); -+} -+ -+static int glamo_mci_send_command(struct glamo_mci_host *host, -+ struct mmc_command *cmd) -+{ -+ u8 u8a[6]; -+ u16 fire = 0; -+ -+ /* if we can't do it, reject as busy */ -+ if (!readw_dly(host->base + GLAMO_REG_MMC_RB_STAT1) & -+ GLAMO_STAT1_MMC_IDLE) { -+ host->mrq = NULL; -+ cmd->error = -EBUSY; -+ mmc_request_done(host->mmc, host->mrq); -+ return -EBUSY; -+ } -+ -+ /* create an array in wire order for CRC computation */ -+ u8a[0] = 0x40 | (cmd->opcode & 0x3f); -+ u8a[1] = (u8)(cmd->arg >> 24); -+ u8a[2] = (u8)(cmd->arg >> 16); -+ u8a[3] = (u8)(cmd->arg >> 8); -+ u8a[4] = (u8)cmd->arg; -+ u8a[5] = CRC7(&u8a[0], 5); /* CRC7 on first 5 bytes of packet */ -+ -+ /* issue the wire-order array including CRC in register order */ -+ writew_dly((u8a[4] << 8) | u8a[5], host->base + GLAMO_REG_MMC_CMD_REG1); -+ writew_dly((u8a[2] << 8) | u8a[3], host->base + GLAMO_REG_MMC_CMD_REG2); -+ writew_dly((u8a[0] << 8) | u8a[1], host->base + GLAMO_REG_MMC_CMD_REG3); -+ -+ /* command index toggle */ -+ fire |= (host->ccnt & 1) << 12; -+ -+ /* set type of command */ -+ switch (mmc_cmd_type(cmd)) { -+ case MMC_CMD_BC: -+ fire |= GLAMO_FIRE_MMC_CMDT_BNR; -+ break; -+ case MMC_CMD_BCR: -+ fire |= GLAMO_FIRE_MMC_CMDT_BR; -+ break; -+ case MMC_CMD_AC: -+ fire |= GLAMO_FIRE_MMC_CMDT_AND; -+ break; -+ case MMC_CMD_ADTC: -+ fire |= GLAMO_FIRE_MMC_CMDT_AD; -+ break; -+ } -+ /* -+ * if it expects a response, set the type expected -+ * -+ * R1, Length : 48bit, Normal response -+ * R1b, Length : 48bit, same R1, but added card busy status -+ * R2, Length : 136bit (really 128 bits with CRC snipped) -+ * R3, Length : 48bit (OCR register value) -+ * R4, Length : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card -+ * R5, Length : 48bit, IO_RW_DIRECTION, Reverse SDIO Card -+ * R6, Length : 48bit (RCA register) -+ * R7, Length : 48bit (interface condition, VHS(voltage supplied), -+ * check pattern, CRC7) -+ */ -+ switch (mmc_resp_type(cmd)) { -+ case MMC_RSP_R6: /* same index as R7 and R1 */ -+ fire |= GLAMO_FIRE_MMC_RSPT_R1; -+ break; -+ case MMC_RSP_R1B: -+ fire |= GLAMO_FIRE_MMC_RSPT_R1b; -+ break; -+ case MMC_RSP_R2: -+ fire |= GLAMO_FIRE_MMC_RSPT_R2; -+ break; -+ case MMC_RSP_R3: -+ fire |= GLAMO_FIRE_MMC_RSPT_R3; -+ break; -+ /* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */ -+ } -+ /* -+ * From the command index, set up the command class in the host ctrllr -+ * -+ * missing guys present on chip but couldn't figure out how to use yet: -+ * 0x0 "stream read" -+ * 0x9 "cancel running command" -+ */ -+ switch (cmd->opcode) { -+ case MMC_READ_SINGLE_BLOCK: -+ fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */ -+ break; -+ case MMC_SWITCH: /* 64 byte payload */ -+ case 0x33: /* observed issued by MCI */ -+ case MMC_READ_MULTIPLE_BLOCK: -+ /* we will get an interrupt off this */ -+ if (!cmd->mrq->stop) -+ /* multiblock no stop */ -+ fire |= GLAMO_FIRE_MMC_CC_MBRNS; -+ else -+ /* multiblock with stop */ -+ fire |= GLAMO_FIRE_MMC_CC_MBRS; -+ break; -+ case MMC_WRITE_BLOCK: -+ fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */ -+ break; -+ case MMC_WRITE_MULTIPLE_BLOCK: -+ if (cmd->mrq->stop) -+ /* multiblock with stop */ -+ fire |= GLAMO_FIRE_MMC_CC_MBWS; -+ else -+ /* multiblock NO stop-- 'RESERVED'? */ -+ fire |= GLAMO_FIRE_MMC_CC_MBWNS; -+ break; -+ case MMC_STOP_TRANSMISSION: -+ fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */ -+ break; -+ default: -+ fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */ -+ break; -+ } -+ -+ /* always largest timeout */ -+ writew(0xfff, host->base + GLAMO_REG_MMC_TIMEOUT); -+ -+ /* Generate interrupt on txfer */ -+ writew_dly((readw_dly(host->base + GLAMO_REG_MMC_BASIC) & 0x3e) | -+ 0x0800 | GLAMO_BASIC_MMC_NO_CLK_RD_WAIT | -+ GLAMO_BASIC_MMC_EN_COMPL_INT | (sd_drive << 6), -+ host->base + GLAMO_REG_MMC_BASIC); -+ -+ /* send the command out on the wire */ -+ /* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */ -+ writew_dly(fire, host->base + GLAMO_REG_MMC_CMD_FIRE); -+ cmd->error = 0; -+ return 0; -+} -+ -+static int glamo_mci_prepare_pio(struct glamo_mci_host *host, -+ struct mmc_data *data) -+{ -+ /* -+ * the S-Media-internal RAM offset for our MMC buffer -+ * Read is halfway up the buffer and write is at the start -+ */ -+ if (data->flags & MMC_DATA_READ) { -+ writew_dly((u16)(GLAMO_FB_SIZE + (RESSIZE(host->mem_data) / 2)), -+ host->base + GLAMO_REG_MMC_WDATADS1); -+ writew_dly((u16)((GLAMO_FB_SIZE + -+ (RESSIZE(host->mem_data) / 2)) >> 16), -+ host->base + GLAMO_REG_MMC_WDATADS2); -+ } else { -+ writew_dly((u16)GLAMO_FB_SIZE, host->base + -+ GLAMO_REG_MMC_RDATADS1); -+ writew_dly((u16)(GLAMO_FB_SIZE >> 16), host->base + -+ GLAMO_REG_MMC_RDATADS2); -+ } -+ -+ /* set up the block info */ -+ writew_dly(data->blksz, host->base + GLAMO_REG_MMC_DATBLKLEN); -+ writew_dly(data->blocks, host->base + GLAMO_REG_MMC_DATBLKCNT); -+ dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n", -+ data->blksz, data->blocks); -+ host->pio_sgptr = 0; -+ host->pio_words = 0; -+ host->pio_count = 0; -+ host->pio_active = 0; -+ /* if write, prep the write into the shared RAM before the command */ -+ if (data->flags & MMC_DATA_WRITE) { -+ host->pio_active = XFER_WRITE; -+ return do_pio_write(host); -+ } -+ host->pio_active = XFER_READ; -+ return 0; -+} -+ -+static void glamo_mci_send_request(struct mmc_host *mmc) -+{ -+ struct glamo_mci_host *host = mmc_priv(mmc); -+ struct mmc_request *mrq = host->mrq; -+ struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; -+ u16 * pu16 = (u16 *)&cmd->resp[0]; -+ u16 * reg_resp = (u16 *)(host->base + GLAMO_REG_MMC_CMD_RSP1); -+ u16 status; -+ int n; -+ int timeout = 100000000; -+ -+ if (host->suspending) { -+ dev_err(&host->pdev->dev, "faking cmd %d " -+ "during suspend\n", cmd->opcode); -+ mmc_request_done(mmc, mrq); -+ return; -+ } -+ -+ host->ccnt++; -+ /* -+ * somehow 2.6.24 MCI manages to issue MMC_WRITE_BLOCK *without* the -+ * MMC_DATA_WRITE flag, WTF? Work around the madness. -+ */ -+ if (cmd->opcode == MMC_WRITE_BLOCK) -+ if (mrq->data) -+ mrq->data->flags |= MMC_DATA_WRITE; -+ -+ /* this guy has data to read/write? */ -+ if ((!host->cmd_is_stop) && cmd->data) { -+ int res; -+ host->dcnt++; -+ res = glamo_mci_prepare_pio(host, cmd->data); -+ if (res) { -+ cmd->error = -EIO; -+ cmd->data->error = -EIO; -+ mmc_request_done(mmc, mrq); -+ return; -+ } -+ } -+ -+ dev_dbg(&host->pdev->dev,"cmd 0x%x, " -+ "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n", -+ cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop, -+ cmd->flags); -+ -+ /* resume requested clock rate -+ * scale it down by sd_slow_ratio if platform requests it -+ */ -+ __glamo_mci_fix_card_div(host, host->clk_div); -+ -+ if (glamo_mci_send_command(host, cmd)) -+ goto bail; -+ /* -+ * we must spin until response is ready or timed out -+ * -- we don't get interrupts unless there is a bulk rx -+ */ -+ do -+ status = readw_dly(host->base + GLAMO_REG_MMC_RB_STAT1); -+ while ((((status >> 15) & 1) != (host->ccnt & 1)) || -+ (!(status & (GLAMO_STAT1_MMC_RB_RRDY | -+ GLAMO_STAT1_MMC_RTOUT | -+ GLAMO_STAT1_MMC_DTOUT | -+ GLAMO_STAT1_MMC_BWERR | -+ GLAMO_STAT1_MMC_BRERR)))); -+ -+ if (status & (GLAMO_STAT1_MMC_RTOUT | -+ GLAMO_STAT1_MMC_DTOUT)) -+ cmd->error = -ETIMEDOUT; -+ if (status & (GLAMO_STAT1_MMC_BWERR | -+ GLAMO_STAT1_MMC_BRERR)) -+ cmd->error = -EILSEQ; -+ -+ if (host->cmd_is_stop) -+ goto bail; -+ -+ if (cmd->error) { -+ dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status); -+ goto done; -+ } -+ /* -+ * mangle the response registers in two different exciting -+ * undocumented ways discovered by trial and error -+ */ -+ if (mmc_resp_type(cmd) == MMC_RSP_R2) -+ /* grab the response */ -+ for (n = 0; n < 8; n++) /* super mangle power 1 */ -+ pu16[n ^ 6] = readw_dly(®_resp[n]); -+ else -+ for (n = 0; n < 3; n++) /* super mangle power 2 */ -+ pu16[n] = (readw_dly(®_resp[n]) >> 8) | -+ (readw_dly(®_resp[n + 1]) << 8); -+ /* -+ * if we don't have bulk data to take care of, we're done -+ */ -+ if (!cmd->data) -+ goto done; -+ if (!(cmd->data->flags & (MMC_DATA_READ | MMC_DATA_WRITE))) -+ goto done; -+ -+ /* -+ * Otherwise can can use the interrupt as async completion -- -+ * if there is read data coming, or we wait for write data to complete, -+ * exit without mmc_request_done() as the payload interrupt -+ * will service it -+ */ -+ dev_dbg(&host->pdev->dev, "Waiting for payload data\n"); -+ /* -+ * if the glamo INT# line isn't wired (*cough* it can happen) -+ * I'm afraid we have to spin on the IRQ status bit and "be -+ * our own INT# line" -+ */ -+ if (!glamo_mci_def_pdata.pglamo->irq_works) { -+ /* -+ * we have faith we will get an "interrupt"... -+ * but something insane like suspend problems can mean -+ * we spin here forever, so we timeout after a LONG time -+ */ -+ while ((!(readw_dly(glamo_mci_def_pdata.pglamo->base + -+ GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) && -+ (timeout--)) -+ ; -+ -+ if (timeout < 0) { -+ if (cmd->data->error) -+ cmd->data->error = -ETIMEDOUT; -+ dev_err(&host->pdev->dev, "Payload timeout\n"); -+ goto bail; -+ } -+ -+ /* yay we are an interrupt controller! -- call the ISR -+ * it will stop clock to card -+ */ -+ glamo_mci_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), -+ irq_desc + IRQ_GLAMO(GLAMO_IRQIDX_MMC)); -+ } -+ return; -+ -+done: -+ host->complete_what = COMPLETION_NONE; -+ host->mrq = NULL; -+ mmc_request_done(host->mmc, cmd->mrq); -+bail: -+ if (!sd_idleclk && !host->force_slow_during_powerup) -+ /* stop the clock to card */ -+ __glamo_mci_fix_card_div(host, -1); -+} -+ -+static void glamo_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct glamo_mci_host *host = mmc_priv(mmc); -+ -+ host->cmd_is_stop = 0; -+ host->mrq = mrq; -+ glamo_mci_send_request(mmc); -+} -+ -+static void glamo_mci_reset(struct glamo_mci_host *host) -+{ -+ dev_dbg(&host->pdev->dev, "******* glamo_mci_reset\n"); -+ /* reset MMC controller */ -+ writew_dly(GLAMO_CLOCK_MMC_RESET | GLAMO_CLOCK_MMC_DG_TCLK | -+ GLAMO_CLOCK_MMC_EN_TCLK | GLAMO_CLOCK_MMC_DG_M9CLK | -+ GLAMO_CLOCK_MMC_EN_M9CLK, -+ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC); -+ msleep(1); -+ /* and disable reset */ -+ writew_dly(GLAMO_CLOCK_MMC_DG_TCLK | -+ GLAMO_CLOCK_MMC_EN_TCLK | GLAMO_CLOCK_MMC_DG_M9CLK | -+ GLAMO_CLOCK_MMC_EN_M9CLK, -+ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC); -+} -+ -+ -+static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -+{ -+ struct glamo_mci_host *host = mmc_priv(mmc); -+ int n = 0; -+ int div; -+ int powering = 0; -+ -+ /* Set power */ -+ switch(ios->power_mode) { -+ case MMC_POWER_ON: -+ case MMC_POWER_UP: -+ /* -+ * we should use very slow clock until first bulk -+ * transfer completes OK -+ */ -+ host->force_slow_during_powerup = 1; -+ -+ if (host->vdd_current != ios->vdd) { -+ host->pdata->glamo_set_mci_power(ios->power_mode, -+ ios->vdd); -+ host->vdd_current = ios->vdd; -+ } -+ if (host->power_mode_current == MMC_POWER_OFF) { -+ glamo_engine_enable(glamo_mci_def_pdata.pglamo, -+ GLAMO_ENGINE_MMC); -+ powering = 1; -+ } -+ break; -+ -+ case MMC_POWER_OFF: -+ default: -+ if (host->power_mode_current == MMC_POWER_OFF) -+ break; -+ /* never want clocking with dead card */ -+ __glamo_mci_fix_card_div(host, -1); -+ -+ glamo_engine_disable(glamo_mci_def_pdata.pglamo, -+ GLAMO_ENGINE_MMC); -+ host->pdata->glamo_set_mci_power(MMC_POWER_OFF, 0); -+ host->vdd_current = -1; -+ break; -+ } -+ host->power_mode_current = ios->power_mode; -+ -+ host->real_rate = __glamo_mci_set_card_clock(host, ios->clock, &div); -+ host->clk_div = div; -+ -+ /* after power-up, we are meant to give it >= 74 clocks so it can -+ * initialize itself. Doubt any modern cards need it but anyway... -+ */ -+ if (powering) -+ msleep(1); -+ -+ if (!sd_idleclk && !host->force_slow_during_powerup) -+ /* stop the clock to card, because we are idle until transfer */ -+ __glamo_mci_fix_card_div(host, -1); -+ -+ if ((ios->power_mode == MMC_POWER_ON) || -+ (ios->power_mode == MMC_POWER_UP)) { -+ dev_info(&host->pdev->dev, -+ "powered (vdd = %d) clk: %lukHz div=%d (req: %ukHz). " -+ "Bus width=%d\n",(int)ios->vdd, -+ host->real_rate / 1000, (int)host->clk_div, -+ ios->clock / 1000, (int)ios->bus_width); -+ } else -+ dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n"); -+ -+ /* set bus width */ -+ host->bus_width = ios->bus_width; -+ if (host->bus_width == MMC_BUS_WIDTH_4) -+ n = GLAMO_BASIC_MMC_EN_4BIT_DATA; -+ writew_dly((readw_dly(host->base + GLAMO_REG_MMC_BASIC) & -+ (~(GLAMO_BASIC_MMC_EN_4BIT_DATA | -+ GLAMO_BASIC_MMC_EN_DR_STR0 | -+ GLAMO_BASIC_MMC_EN_DR_STR1))) | n | -+ sd_drive << 6, host->base + GLAMO_REG_MMC_BASIC); -+} -+ -+ -+/* -+ * no physical write protect supported by us -+ */ -+static int glamo_mci_get_ro(struct mmc_host *mmc) -+{ -+ return 0; -+} -+ -+static struct mmc_host_ops glamo_mci_ops = { -+ .request = glamo_mci_request, -+ .set_ios = glamo_mci_set_ios, -+ .get_ro = glamo_mci_get_ro, -+}; -+ -+static int glamo_mci_probe(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc; -+ struct glamo_mci_host *host; -+ int ret; -+ -+ dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n"); -+ -+ mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev); -+ if (!mmc) { -+ ret = -ENOMEM; -+ goto probe_out; -+ } -+ -+ host = mmc_priv(mmc); -+ host->mmc = mmc; -+ host->pdev = pdev; -+ host->pdata = &glamo_mci_def_pdata; -+ host->power_mode_current = MMC_POWER_OFF; -+ -+ host->complete_what = COMPLETION_NONE; -+ host->pio_active = XFER_NONE; -+ -+ spin_lock_init(&host->complete_lock); -+ -+ host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!host->mem) { -+ dev_err(&pdev->dev, -+ "failed to get io memory region resouce.\n"); -+ -+ ret = -ENOENT; -+ goto probe_free_host; -+ } -+ -+ host->mem = request_mem_region(host->mem->start, -+ RESSIZE(host->mem), pdev->name); -+ -+ if (!host->mem) { -+ dev_err(&pdev->dev, "failed to request io memory region.\n"); -+ ret = -ENOENT; -+ goto probe_free_host; -+ } -+ -+ host->base = ioremap(host->mem->start, RESSIZE(host->mem)); -+ if (!host->base) { -+ dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); -+ ret = -EINVAL; -+ goto probe_free_mem_region; -+ } -+ -+ /* set the handler for our bit of the shared chip irq register */ -+ set_irq_handler(IRQ_GLAMO(GLAMO_IRQIDX_MMC), glamo_mci_irq); -+ /* stash host as our handler's private data */ -+ set_irq_data(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host); -+ -+ /* Get ahold of our data buffer we use for data in and out on MMC */ -+ host->mem_data = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ if (!host->mem_data) { -+ dev_err(&pdev->dev, -+ "failed to get io memory region resource.\n"); -+ ret = -ENOENT; -+ goto probe_iounmap; -+ } -+ -+ host->mem_data = request_mem_region(host->mem_data->start, -+ RESSIZE(host->mem_data), pdev->name); -+ -+ if (!host->mem_data) { -+ dev_err(&pdev->dev, "failed to request io memory region.\n"); -+ ret = -ENOENT; -+ goto probe_iounmap; -+ } -+ host->base_data = ioremap(host->mem_data->start, -+ RESSIZE(host->mem_data)); -+ host->data_max_size = RESSIZE(host->mem_data); -+ -+ if (host->base_data == 0) { -+ dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); -+ ret = -EINVAL; -+ goto probe_free_mem_region_data; -+ } -+ -+ host->vdd_current = 0; -+ host->clk_rate = 50000000; /* really it's 49152000 */ -+ host->clk_div = 16; -+ -+ /* explain our host controller capabilities */ -+ mmc->ops = &glamo_mci_ops; -+ mmc->ocr_avail = host->pdata->ocr_avail; -+ mmc->caps = MMC_CAP_4_BIT_DATA | -+ MMC_CAP_MULTIWRITE | -+ MMC_CAP_MMC_HIGHSPEED | -+ MMC_CAP_SD_HIGHSPEED; -+ mmc->f_min = host->clk_rate / 256; -+ mmc->f_max = sd_max_clk; -+ -+ mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */ -+ mmc->max_blk_size = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */ -+ mmc->max_req_size = RESSIZE(host->mem_data) / 2; -+ mmc->max_seg_size = mmc->max_req_size; -+ mmc->max_phys_segs = 1; /* hw doesn't talk about segs??? */ -+ mmc->max_hw_segs = 1; -+ -+ dev_info(&host->pdev->dev, "probe: mapped mci_base:%p irq:%u.\n", -+ host->base, host->irq); -+ -+ if ((ret = mmc_add_host(mmc))) { -+ dev_err(&pdev->dev, "failed to add mmc host.\n"); -+ goto probe_free_mem_region_data; -+ } -+ -+ platform_set_drvdata(pdev, mmc); -+ -+ dev_info(&pdev->dev,"initialisation done.\n"); -+ return 0; -+ -+ probe_free_mem_region_data: -+ release_mem_region(host->mem_data->start, RESSIZE(host->mem_data)); -+ -+ probe_iounmap: -+ iounmap(host->base); -+ -+ probe_free_mem_region: -+ release_mem_region(host->mem->start, RESSIZE(host->mem)); -+ -+ probe_free_host: -+ mmc_free_host(mmc); -+ probe_out: -+ return ret; -+} -+ -+static int glamo_mci_remove(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(pdev); -+ struct glamo_mci_host *host = mmc_priv(mmc); -+ -+ mmc_remove_host(mmc); -+ /* stop using our handler, revert it to default */ -+ set_irq_handler(IRQ_GLAMO(GLAMO_IRQIDX_MMC), handle_level_irq); -+ iounmap(host->base); -+ iounmap(host->base_data); -+ release_mem_region(host->mem->start, RESSIZE(host->mem)); -+ release_mem_region(host->mem_data->start, RESSIZE(host->mem_data)); -+ mmc_free_host(mmc); -+ -+ glamo_engine_disable(glamo_mci_def_pdata.pglamo, GLAMO_ENGINE_MMC); -+ return 0; -+} -+ -+ -+#ifdef CONFIG_PM -+ -+static int glamo_mci_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(dev); -+ struct glamo_mci_host *host = mmc_priv(mmc); -+ int ret; -+ -+ /* -+ * possible workaround for SD corruption during suspend - resume -+ * make sure the clock was running during suspend and consequently -+ * resume -+ */ -+ __glamo_mci_fix_card_div(host, host->clk_div); -+ -+ /* we are going to do more commands to override this in -+ * mmc_suspend_host(), so we need to change sd_idleclk for the -+ * duration as well -+ */ -+ suspend_sd_idleclk = sd_idleclk; -+ sd_idleclk = 1; -+ -+ host->suspending++; -+ if (host->pdata->mci_all_dependencies_resumed) -+ (host->pdata->mci_suspending)(dev); -+ -+ ret = mmc_suspend_host(mmc, state); -+ -+ /* so that when we resume, we use any modified max rate */ -+ mmc->f_max = sd_max_clk; -+ -+ return ret; -+} -+ -+int glamo_mci_resume(struct platform_device *dev) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(dev); -+ struct glamo_mci_host *host = mmc_priv(mmc); -+ int ret; -+ -+ if (host->pdata->mci_all_dependencies_resumed) -+ if (!(host->pdata->mci_all_dependencies_resumed)(dev)) -+ return 0; -+ -+ host->suspending--; -+ -+ ret = mmc_resume_host(mmc); -+ -+ /* put sd_idleclk back to pre-suspend state */ -+ sd_idleclk = suspend_sd_idleclk; -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(glamo_mci_resume); -+ -+#else /* CONFIG_PM */ -+#define glamo_mci_suspend NULL -+#define glamo_mci_resume NULL -+#endif /* CONFIG_PM */ -+ -+ -+static struct platform_driver glamo_mci_driver = -+{ -+ .driver.name = "glamo-mci", -+ .probe = glamo_mci_probe, -+ .remove = glamo_mci_remove, -+ .suspend = glamo_mci_suspend, -+ .resume = glamo_mci_resume, -+}; -+ -+static int __init glamo_mci_init(void) -+{ -+ spin_lock_init(&clock_lock); -+ platform_driver_register(&glamo_mci_driver); -+ return 0; -+} -+ -+static void __exit glamo_mci_exit(void) -+{ -+ platform_driver_unregister(&glamo_mci_driver); -+} -+ -+module_init(glamo_mci_init); -+module_exit(glamo_mci_exit); -+ -+MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver"); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Andy Green "); -Index: linux-2.6.24.7/drivers/mfd/glamo/glamo-mci.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/glamo-mci.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,80 @@ -+/* -+ * linux/drivers/mmc/host/glamo-mmc.h - GLAMO MCI driver -+ * -+ * Copyright (C) 2007-2008 Openmoko, Inc, Andy Green -+ * based on S3C MMC driver --> -+ * Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+ -+enum glamo_mci_waitfor { -+ COMPLETION_NONE, -+ COMPLETION_FINALIZE, -+ COMPLETION_CMDSENT, -+ COMPLETION_RSPFIN, -+ COMPLETION_XFERFINISH, -+ COMPLETION_XFERFINISH_RSPFIN, -+}; -+ -+struct glamo_mci_host { -+ struct platform_device *pdev; -+ struct glamo_mci_pdata *pdata; -+ struct mmc_host *mmc; -+ struct resource *mem; -+ struct resource *mem_data; -+ struct clk *clk; -+ void __iomem *base; -+ u16 __iomem *base_data; -+ int irq; -+ int irq_cd; -+ int dma; -+ int data_max_size; -+ -+ int suspending; -+ -+ int power_mode_current; -+ unsigned int vdd_current; -+ -+ unsigned long clk_rate; -+ unsigned long clk_div; -+ unsigned long real_rate; -+ u8 prescaler; -+ -+ int force_slow_during_powerup; -+ -+ unsigned sdiimsk; -+ int dodma; -+ -+ volatile int dmatogo; -+ -+ struct mmc_request *mrq; -+ int cmd_is_stop; -+ -+ spinlock_t complete_lock; -+ volatile enum glamo_mci_waitfor -+ complete_what; -+ -+ volatile int dma_complete; -+ -+ volatile u32 pio_sgptr; -+ volatile u32 pio_words; -+ volatile u32 pio_count; -+ volatile u16 *pio_ptr; -+#define XFER_NONE 0 -+#define XFER_READ 1 -+#define XFER_WRITE 2 -+ volatile u32 pio_active; -+ -+ int bus_width; -+ -+ char dbgmsg_cmd[301]; -+ char dbgmsg_dat[301]; -+ volatile char *status; -+ -+ unsigned int ccnt, dcnt; -+ struct tasklet_struct pio_tasklet; -+}; -Index: linux-2.6.24.7/drivers/mfd/glamo/glamo-regs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/glamo-regs.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,632 @@ -+#ifndef _GLAMO_REGS_H -+#define _GLAMO_REGS_H -+ -+/* Smedia Glamo 336x/337x driver -+ * -+ * (C) 2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+enum glamo_regster_offsets { -+ GLAMO_REGOFS_GENERIC = 0x0000, -+ GLAMO_REGOFS_HOSTBUS = 0x0200, -+ GLAMO_REGOFS_MEMORY = 0x0300, -+ GLAMO_REGOFS_VIDCAP = 0x0400, -+ GLAMO_REGOFS_ISP = 0x0500, -+ GLAMO_REGOFS_JPEG = 0x0800, -+ GLAMO_REGOFS_MPEG = 0x0c00, -+ GLAMO_REGOFS_LCD = 0x1100, -+ GLAMO_REGOFS_MMC = 0x1400, -+ GLAMO_REGOFS_MPROC0 = 0x1500, -+ GLAMO_REGOFS_MPROC1 = 0x1580, -+ GLAMO_REGOFS_CMDQUEUE = 0x1600, -+ GLAMO_REGOFS_RISC = 0x1680, -+ GLAMO_REGOFS_2D = 0x1700, -+ GLAMO_REGOFS_3D = 0x1b00, -+ GLAMO_REGOFS_END = 0x2400, -+}; -+ -+ -+enum glamo_register_generic { -+ GLAMO_REG_GCONF1 = 0x0000, -+ GLAMO_REG_GCONF2 = 0x0002, -+#define GLAMO_REG_DEVICE_ID GLAMO_REG_GCONF2 -+ GLAMO_REG_GCONF3 = 0x0004, -+#define GLAMO_REG_REVISION_ID GLAMO_REG_GCONF3 -+ GLAMO_REG_IRQ_GEN1 = 0x0006, -+#define GLAMO_REG_IRQ_ENABLE GLAMO_REG_IRQ_GEN1 -+ GLAMO_REG_IRQ_GEN2 = 0x0008, -+#define GLAMO_REG_IRQ_SET GLAMO_REG_IRQ_GEN2 -+ GLAMO_REG_IRQ_GEN3 = 0x000a, -+#define GLAMO_REG_IRQ_CLEAR GLAMO_REG_IRQ_GEN3 -+ GLAMO_REG_IRQ_GEN4 = 0x000c, -+#define GLAMO_REG_IRQ_STATUS GLAMO_REG_IRQ_GEN4 -+ GLAMO_REG_CLOCK_HOST = 0x0010, -+ GLAMO_REG_CLOCK_MEMORY = 0x0012, -+ GLAMO_REG_CLOCK_LCD = 0x0014, -+ GLAMO_REG_CLOCK_MMC = 0x0016, -+ GLAMO_REG_CLOCK_ISP = 0x0018, -+ GLAMO_REG_CLOCK_JPEG = 0x001a, -+ GLAMO_REG_CLOCK_3D = 0x001c, -+ GLAMO_REG_CLOCK_2D = 0x001e, -+ GLAMO_REG_CLOCK_RISC1 = 0x0020, /* 3365 only? */ -+ GLAMO_REG_CLOCK_RISC2 = 0x0022, /* 3365 only? */ -+ GLAMO_REG_CLOCK_MPEG = 0x0024, -+ GLAMO_REG_CLOCK_MPROC = 0x0026, -+ -+ GLAMO_REG_CLOCK_GEN5_1 = 0x0030, -+ GLAMO_REG_CLOCK_GEN5_2 = 0x0032, -+ GLAMO_REG_CLOCK_GEN6 = 0x0034, -+ GLAMO_REG_CLOCK_GEN7 = 0x0036, -+ GLAMO_REG_CLOCK_GEN8 = 0x0038, -+ GLAMO_REG_CLOCK_GEN9 = 0x003a, -+ GLAMO_REG_CLOCK_GEN10 = 0x003c, -+ GLAMO_REG_CLOCK_GEN11 = 0x003e, -+ GLAMO_REG_PLL_GEN1 = 0x0040, -+ GLAMO_REG_PLL_GEN2 = 0x0042, -+ GLAMO_REG_PLL_GEN3 = 0x0044, -+ GLAMO_REG_PLL_GEN4 = 0x0046, -+ GLAMO_REG_PLL_GEN5 = 0x0048, -+ GLAMO_REG_GPIO_GEN1 = 0x0050, -+ GLAMO_REG_GPIO_GEN2 = 0x0052, -+ GLAMO_REG_GPIO_GEN3 = 0x0054, -+ GLAMO_REG_GPIO_GEN4 = 0x0056, -+ GLAMO_REG_GPIO_GEN5 = 0x0058, -+ GLAMO_REG_GPIO_GEN6 = 0x005a, -+ GLAMO_REG_GPIO_GEN7 = 0x005c, -+ GLAMO_REG_GPIO_GEN8 = 0x005e, -+ GLAMO_REG_GPIO_GEN9 = 0x0060, -+ GLAMO_REG_GPIO_GEN10 = 0x0062, -+ GLAMO_REG_DFT_GEN1 = 0x0070, -+ GLAMO_REG_DFT_GEN2 = 0x0072, -+ GLAMO_REG_DFT_GEN3 = 0x0074, -+ GLAMO_REG_DFT_GEN4 = 0x0076, -+ -+ GLAMO_REG_DFT_GEN5 = 0x01e0, -+ GLAMO_REG_DFT_GEN6 = 0x01f0, -+}; -+ -+#define GLAMO_REG_HOSTBUS(x) (GLAMO_REGOFS_HOSTBUS-2+(x*2)) -+ -+#define REG_MEM(x) (GLAMO_REGOFS_MEMORY+(x)) -+#define GLAMO_REG_MEM_TIMING(x) (GLAMO_REG_MEM_TIMING1-2+(x*2)) -+ -+enum glamo_register_mem { -+ GLAMO_REG_MEM_TYPE = REG_MEM(0x00), -+ GLAMO_REG_MEM_GEN = REG_MEM(0x02), -+ GLAMO_REG_MEM_TIMING1 = REG_MEM(0x04), -+ GLAMO_REG_MEM_TIMING2 = REG_MEM(0x06), -+ GLAMO_REG_MEM_TIMING3 = REG_MEM(0x08), -+ GLAMO_REG_MEM_TIMING4 = REG_MEM(0x0a), -+ GLAMO_REG_MEM_TIMING5 = REG_MEM(0x0c), -+ GLAMO_REG_MEM_TIMING6 = REG_MEM(0x0e), -+ GLAMO_REG_MEM_TIMING7 = REG_MEM(0x10), -+ GLAMO_REG_MEM_TIMING8 = REG_MEM(0x12), -+ GLAMO_REG_MEM_TIMING9 = REG_MEM(0x14), -+ GLAMO_REG_MEM_TIMING10 = REG_MEM(0x16), -+ GLAMO_REG_MEM_TIMING11 = REG_MEM(0x18), -+ GLAMO_REG_MEM_POWER1 = REG_MEM(0x1a), -+ GLAMO_REG_MEM_POWER2 = REG_MEM(0x1c), -+ GLAMO_REG_MEM_LCD_BUF1 = REG_MEM(0x1e), -+ GLAMO_REG_MEM_LCD_BUF2 = REG_MEM(0x20), -+ GLAMO_REG_MEM_LCD_BUF3 = REG_MEM(0x22), -+ GLAMO_REG_MEM_LCD_BUF4 = REG_MEM(0x24), -+ GLAMO_REG_MEM_BIST1 = REG_MEM(0x26), -+ GLAMO_REG_MEM_BIST2 = REG_MEM(0x28), -+ GLAMO_REG_MEM_BIST3 = REG_MEM(0x2a), -+ GLAMO_REG_MEM_BIST4 = REG_MEM(0x2c), -+ GLAMO_REG_MEM_BIST5 = REG_MEM(0x2e), -+ GLAMO_REG_MEM_MAH1 = REG_MEM(0x30), -+ GLAMO_REG_MEM_MAH2 = REG_MEM(0x32), -+ GLAMO_REG_MEM_DRAM1 = REG_MEM(0x34), -+ GLAMO_REG_MEM_DRAM2 = REG_MEM(0x36), -+ GLAMO_REG_MEM_CRC = REG_MEM(0x38), -+}; -+ -+#define GLAMO_MEM_TYPE_MASK 0x03 -+ -+enum glamo_reg_mem_dram1 { -+ /* b0 - b10 == refresh period, 1 -> 2048 clocks */ -+ GLAMO_MEM_DRAM1_EN_GATE_CLK = (1 << 11), -+ GLAMO_MEM_DRAM1_SELF_REFRESH = (1 << 12), -+ GLAMO_MEM_DRAM1_EN_GATE_CKE = (1 << 13), -+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH = (1 << 14), -+ GLAMO_MEM_DRAM1_EN_MODEREG_SET = (1 << 15), -+}; -+ -+enum glamo_reg_mem_dram2 { -+ GLAMO_MEM_DRAM2_DEEP_PWRDOWN = (1 << 12), -+}; -+ -+enum glamo_irq_index { -+ GLAMO_IRQIDX_HOSTBUS = 0, -+ GLAMO_IRQIDX_JPEG = 1, -+ GLAMO_IRQIDX_MPEG = 2, -+ GLAMO_IRQIDX_MPROC1 = 3, -+ GLAMO_IRQIDX_MPROC0 = 4, -+ GLAMO_IRQIDX_CMDQUEUE = 5, -+ GLAMO_IRQIDX_2D = 6, -+ GLAMO_IRQIDX_MMC = 7, -+ GLAMO_IRQIDX_RISC = 8, -+}; -+ -+enum glamo_irq { -+ GLAMO_IRQ_HOSTBUS = (1 << GLAMO_IRQIDX_HOSTBUS), -+ GLAMO_IRQ_JPEG = (1 << GLAMO_IRQIDX_JPEG), -+ GLAMO_IRQ_MPEG = (1 << GLAMO_IRQIDX_MPEG), -+ GLAMO_IRQ_MPROC1 = (1 << GLAMO_IRQIDX_MPROC1), -+ GLAMO_IRQ_MPROC0 = (1 << GLAMO_IRQIDX_MPROC0), -+ GLAMO_IRQ_CMDQUEUE = (1 << GLAMO_IRQIDX_CMDQUEUE), -+ GLAMO_IRQ_2D = (1 << GLAMO_IRQIDX_2D), -+ GLAMO_IRQ_MMC = (1 << GLAMO_IRQIDX_MMC), -+ GLAMO_IRQ_RISC = (1 << GLAMO_IRQIDX_RISC), -+}; -+ -+enum glamo_reg_clock_host { -+ GLAMO_CLOCK_HOST_DG_BCLK = 0x0001, -+ GLAMO_CLOCK_HOST_DG_M0CLK = 0x0004, -+ GLAMO_CLOCK_HOST_RESET = 0x1000, -+}; -+ -+enum glamo_reg_clock_mem { -+ GLAMO_CLOCK_MEM_DG_M1CLK = 0x0001, -+ GLAMO_CLOCK_MEM_EN_M1CLK = 0x0002, -+ GLAMO_CLOCK_MEM_DG_MOCACLK = 0x0004, -+ GLAMO_CLOCK_MEM_EN_MOCACLK = 0x0008, -+ GLAMO_CLOCK_MEM_RESET = 0x1000, -+ GLAMO_CLOCK_MOCA_RESET = 0x2000, -+}; -+ -+enum glamo_reg_clock_lcd { -+ GLAMO_CLOCK_LCD_DG_DCLK = 0x0001, -+ GLAMO_CLOCK_LCD_EN_DCLK = 0x0002, -+ GLAMO_CLOCK_LCD_DG_DMCLK = 0x0004, -+ GLAMO_CLOCK_LCD_EN_DMCLK = 0x0008, -+ // -+ GLAMO_CLOCK_LCD_EN_DHCLK = 0x0020, -+ GLAMO_CLOCK_LCD_DG_M5CLK = 0x0040, -+ GLAMO_CLOCK_LCD_EN_M5CLK = 0x0080, -+ GLAMO_CLOCK_LCD_RESET = 0x1000, -+}; -+ -+enum glamo_reg_clock_mmc { -+ GLAMO_CLOCK_MMC_DG_TCLK = 0x0001, -+ GLAMO_CLOCK_MMC_EN_TCLK = 0x0002, -+ GLAMO_CLOCK_MMC_DG_M9CLK = 0x0004, -+ GLAMO_CLOCK_MMC_EN_M9CLK = 0x0008, -+ GLAMO_CLOCK_MMC_RESET = 0x1000, -+}; -+ -+enum glamo_reg_basic_mmc { -+ /* set to disable CRC error rejection */ -+ GLAMO_BASIC_MMC_DISABLE_CRC = 0x0001, -+ /* enable completion interrupt */ -+ GLAMO_BASIC_MMC_EN_COMPL_INT = 0x0002, -+ /* stop MMC clock while enforced idle waiting for data from card */ -+ GLAMO_BASIC_MMC_NO_CLK_RD_WAIT = 0x0004, -+ /* 0 = 1-bit bus to card, 1 = use 4-bit bus (has to be negotiated) */ -+ GLAMO_BASIC_MMC_EN_4BIT_DATA = 0x0008, -+ /* enable 75K pullups on D3..D0 */ -+ GLAMO_BASIC_MMC_EN_DATA_PUPS = 0x0010, -+ /* enable 75K pullup on CMD */ -+ GLAMO_BASIC_MMC_EN_CMD_PUP = 0x0020, -+ /* IO drive strength 00=weak -> 11=strongest */ -+ GLAMO_BASIC_MMC_EN_DR_STR0 = 0x0040, -+ GLAMO_BASIC_MMC_EN_DR_STR1 = 0x0080, -+ /* TCLK delay stage A, 0000 = 500ps --> 1111 = 8ns */ -+ GLAMO_BASIC_MMC_EN_TCLK_DLYA0 = 0x0100, -+ GLAMO_BASIC_MMC_EN_TCLK_DLYA1 = 0x0200, -+ GLAMO_BASIC_MMC_EN_TCLK_DLYA2 = 0x0400, -+ GLAMO_BASIC_MMC_EN_TCLK_DLYA3 = 0x0800, -+ /* TCLK delay stage B (cumulative), 0000 = 500ps --> 1111 = 8ns */ -+ GLAMO_BASIC_MMC_EN_TCLK_DLYB0 = 0x1000, -+ GLAMO_BASIC_MMC_EN_TCLK_DLYB1 = 0x2000, -+ GLAMO_BASIC_MMC_EN_TCLK_DLYB2 = 0x4000, -+ GLAMO_BASIC_MMC_EN_TCLK_DLYB3 = 0x8000, -+}; -+ -+enum glamo_reg_stat1_mmc { -+ /* command "counter" (really: toggle) */ -+ GLAMO_STAT1_MMC_CMD_CTR = 0x8000, -+ /* engine is idle */ -+ GLAMO_STAT1_MMC_IDLE = 0x4000, -+ /* readback response is ready */ -+ GLAMO_STAT1_MMC_RB_RRDY = 0x0200, -+ /* readback data is ready */ -+ GLAMO_STAT1_MMC_RB_DRDY = 0x0100, -+ /* no response timeout */ -+ GLAMO_STAT1_MMC_RTOUT = 0x0020, -+ /* no data timeout */ -+ GLAMO_STAT1_MMC_DTOUT = 0x0010, -+ /* CRC error on block write */ -+ GLAMO_STAT1_MMC_BWERR = 0x0004, -+ /* CRC error on block read */ -+ GLAMO_STAT1_MMC_BRERR = 0x0002 -+}; -+ -+enum glamo_reg_fire_mmc { -+ /* command "counter" (really: toggle) -+ * the STAT1 register reflects this so you can ensure you don't look -+ * at status for previous command -+ */ -+ GLAMO_FIRE_MMC_CMD_CTR = 0x8000, -+ /* sets kind of response expected */ -+ GLAMO_FIRE_MMC_RES_MASK = 0x0700, -+ /* sets command type */ -+ GLAMO_FIRE_MMC_TYP_MASK = 0x00C0, -+ /* sets command class */ -+ GLAMO_FIRE_MMC_CLS_MASK = 0x000F, -+}; -+ -+enum glamo_fire_mmc_response_types { -+ GLAMO_FIRE_MMC_RSPT_R1 = 0x0000, -+ GLAMO_FIRE_MMC_RSPT_R1b = 0x0100, -+ GLAMO_FIRE_MMC_RSPT_R2 = 0x0200, -+ GLAMO_FIRE_MMC_RSPT_R3 = 0x0300, -+ GLAMO_FIRE_MMC_RSPT_R4 = 0x0400, -+ GLAMO_FIRE_MMC_RSPT_R5 = 0x0500, -+}; -+ -+enum glamo_fire_mmc_command_types { -+ /* broadcast, no response */ -+ GLAMO_FIRE_MMC_CMDT_BNR = 0x0000, -+ /* broadcast, with response */ -+ GLAMO_FIRE_MMC_CMDT_BR = 0x0040, -+ /* addressed, no data */ -+ GLAMO_FIRE_MMC_CMDT_AND = 0x0080, -+ /* addressed, with data */ -+ GLAMO_FIRE_MMC_CMDT_AD = 0x00C0, -+}; -+ -+enum glamo_fire_mmc_command_class { -+ /* "Stream Read" */ -+ GLAMO_FIRE_MMC_CC_STRR = 0x0000, -+ /* Single Block Read */ -+ GLAMO_FIRE_MMC_CC_SBR = 0x0001, -+ /* Multiple Block Read With Stop */ -+ GLAMO_FIRE_MMC_CC_MBRS = 0x0002, -+ /* Multiple Block Read No Stop */ -+ GLAMO_FIRE_MMC_CC_MBRNS = 0x0003, -+ /* RESERVED for "Stream Write" */ -+ GLAMO_FIRE_MMC_CC_STRW = 0x0004, -+ /* "Stream Write" */ -+ GLAMO_FIRE_MMC_CC_SBW = 0x0005, -+ /* RESERVED for Multiple Block Write With Stop */ -+ GLAMO_FIRE_MMC_CC_MBWS = 0x0006, -+ /* Multiple Block Write No Stop */ -+ GLAMO_FIRE_MMC_CC_MBWNS = 0x0007, -+ /* STOP command */ -+ GLAMO_FIRE_MMC_CC_STOP = 0x0008, -+ /* Cancel on Running Command */ -+ GLAMO_FIRE_MMC_CC_CANCL = 0x0009, -+ /* "Basic Command" */ -+ GLAMO_FIRE_MMC_CC_BASIC = 0x000a, -+}; -+ -+/* these are offsets from the start of the MMC register region */ -+enum glamo_register_mmc { -+ /* MMC command, b15..8 = cmd arg b7..0; b7..1 = CRC; b0 = end bit */ -+ GLAMO_REG_MMC_CMD_REG1 = 0x00, -+ /* MMC command, b15..0 = cmd arg b23 .. 8 */ -+ GLAMO_REG_MMC_CMD_REG2 = 0x02, -+ /* MMC command, b15=start, b14=transmission, -+ * b13..8=cmd idx, b7..0=cmd arg b31..24 -+ */ -+ GLAMO_REG_MMC_CMD_REG3 = 0x04, -+ GLAMO_REG_MMC_CMD_FIRE = 0x06, -+ GLAMO_REG_MMC_CMD_RSP1 = 0x10, -+ GLAMO_REG_MMC_CMD_RSP2 = 0x12, -+ GLAMO_REG_MMC_CMD_RSP3 = 0x14, -+ GLAMO_REG_MMC_CMD_RSP4 = 0x16, -+ GLAMO_REG_MMC_CMD_RSP5 = 0x18, -+ GLAMO_REG_MMC_CMD_RSP6 = 0x1a, -+ GLAMO_REG_MMC_CMD_RSP7 = 0x1c, -+ GLAMO_REG_MMC_CMD_RSP8 = 0x1e, -+ GLAMO_REG_MMC_RB_STAT1 = 0x20, -+ GLAMO_REG_MMC_RB_BLKCNT = 0x22, -+ GLAMO_REG_MMC_RB_BLKLEN = 0x24, -+ GLAMO_REG_MMC_BASIC = 0x30, -+ GLAMO_REG_MMC_RDATADS1 = 0x34, -+ GLAMO_REG_MMC_RDATADS2 = 0x36, -+ GLAMO_REG_MMC_WDATADS1 = 0x38, -+ GLAMO_REG_MMC_WDATADS2 = 0x3a, -+ GLAMO_REG_MMC_DATBLKCNT = 0x3c, -+ GLAMO_REG_MMC_DATBLKLEN = 0x3e, -+ GLAMO_REG_MMC_TIMEOUT = 0x40, -+ -+}; -+ -+enum glamo_reg_clock_isp { -+ GLAMO_CLOCK_ISP_DG_I1CLK = 0x0001, -+ GLAMO_CLOCK_ISP_EN_I1CLK = 0x0002, -+ GLAMO_CLOCK_ISP_DG_CCLK = 0x0004, -+ GLAMO_CLOCK_ISP_EN_CCLK = 0x0008, -+ // -+ GLAMO_CLOCK_ISP_EN_SCLK = 0x0020, -+ GLAMO_CLOCK_ISP_DG_M2CLK = 0x0040, -+ GLAMO_CLOCK_ISP_EN_M2CLK = 0x0080, -+ GLAMO_CLOCK_ISP_DG_M15CLK = 0x0100, -+ GLAMO_CLOCK_ISP_EN_M15CLK = 0x0200, -+ GLAMO_CLOCK_ISP1_RESET = 0x1000, -+ GLAMO_CLOCK_ISP2_RESET = 0x2000, -+}; -+ -+enum glamo_reg_clock_jpeg { -+ GLAMO_CLOCK_JPEG_DG_JCLK = 0x0001, -+ GLAMO_CLOCK_JPEG_EN_JCLK = 0x0002, -+ GLAMO_CLOCK_JPEG_DG_M3CLK = 0x0004, -+ GLAMO_CLOCK_JPEG_EN_M3CLK = 0x0008, -+ GLAMO_CLOCK_JPEG_RESET = 0x1000, -+}; -+ -+enum glamo_reg_clock_2d { -+ GLAMO_CLOCK_2D_DG_GCLK = 0x0001, -+ GLAMO_CLOCK_2D_EN_GCLK = 0x0002, -+ GLAMO_CLOCK_2D_DG_M7CLK = 0x0004, -+ GLAMO_CLOCK_2D_EN_M7CLK = 0x0008, -+ GLAMO_CLOCK_2D_DG_M6CLK = 0x0010, -+ GLAMO_CLOCK_2D_EN_M6CLK = 0x0020, -+ GLAMO_CLOCK_2D_RESET = 0x1000, -+ GLAMO_CLOCK_2D_CQ_RESET = 0x2000, -+}; -+ -+enum glamo_reg_clock_3d { -+ GLAMO_CLOCK_3D_DG_ECLK = 0x0001, -+ GLAMO_CLOCK_3D_EN_ECLK = 0x0002, -+ GLAMO_CLOCK_3D_DG_RCLK = 0x0004, -+ GLAMO_CLOCK_3D_EN_RCLK = 0x0008, -+ GLAMO_CLOCK_3D_DG_M8CLK = 0x0010, -+ GLAMO_CLOCK_3D_EN_M8CLK = 0x0020, -+ GLAMO_CLOCK_3D_BACK_RESET = 0x1000, -+ GLAMO_CLOCK_3D_FRONT_RESET = 0x2000, -+}; -+ -+enum glamo_reg_clock_mpeg { -+ GLAMO_CLOCK_MPEG_DG_X0CLK = 0x0001, -+ GLAMO_CLOCK_MPEG_EN_X0CLK = 0x0002, -+ GLAMO_CLOCK_MPEG_DG_X1CLK = 0x0004, -+ GLAMO_CLOCK_MPEG_EN_X1CLK = 0x0008, -+ GLAMO_CLOCK_MPEG_DG_X2CLK = 0x0010, -+ GLAMO_CLOCK_MPEG_EN_X2CLK = 0x0020, -+ GLAMO_CLOCK_MPEG_DG_X3CLK = 0x0040, -+ GLAMO_CLOCK_MPEG_EN_X3CLK = 0x0080, -+ GLAMO_CLOCK_MPEG_DG_X4CLK = 0x0100, -+ GLAMO_CLOCK_MPEG_EN_X4CLK = 0x0200, -+ GLAMO_CLOCK_MPEG_DG_X6CLK = 0x0400, -+ GLAMO_CLOCK_MPEG_EN_X6CLK = 0x0800, -+ GLAMO_CLOCK_MPEG_ENC_RESET = 0x1000, -+ GLAMO_CLOCK_MPEG_DEC_RESET = 0x2000, -+}; -+ -+enum glamo_reg_clock51 { -+ GLAMO_CLOCK_GEN51_EN_DIV_MCLK = 0x0001, -+ GLAMO_CLOCK_GEN51_EN_DIV_SCLK = 0x0002, -+ GLAMO_CLOCK_GEN51_EN_DIV_JCLK = 0x0004, -+ GLAMO_CLOCK_GEN51_EN_DIV_DCLK = 0x0008, -+ GLAMO_CLOCK_GEN51_EN_DIV_DMCLK = 0x0010, -+ GLAMO_CLOCK_GEN51_EN_DIV_DHCLK = 0x0020, -+ GLAMO_CLOCK_GEN51_EN_DIV_GCLK = 0x0040, -+ GLAMO_CLOCK_GEN51_EN_DIV_TCLK = 0x0080, -+ /* FIXME: higher bits */ -+}; -+ -+enum glamo_reg_hostbus2 { -+ GLAMO_HOSTBUS2_MMIO_EN_ISP = 0x0001, -+ GLAMO_HOSTBUS2_MMIO_EN_JPEG = 0x0002, -+ GLAMO_HOSTBUS2_MMIO_EN_MPEG = 0x0004, -+ GLAMO_HOSTBUS2_MMIO_EN_LCD = 0x0008, -+ GLAMO_HOSTBUS2_MMIO_EN_MMC = 0x0010, -+ GLAMO_HOSTBUS2_MMIO_EN_MICROP0 = 0x0020, -+ GLAMO_HOSTBUS2_MMIO_EN_MICROP1 = 0x0040, -+ GLAMO_HOSTBUS2_MMIO_EN_CQ = 0x0080, -+ GLAMO_HOSTBUS2_MMIO_EN_RISC = 0x0100, -+ GLAMO_HOSTBUS2_MMIO_EN_2D = 0x0200, -+ GLAMO_HOSTBUS2_MMIO_EN_3D = 0x0400, -+}; -+ -+/* LCD Controller */ -+ -+#define REG_LCD(x) (x) -+enum glamo_reg_lcd { -+ GLAMO_REG_LCD_MODE1 = REG_LCD(0x00), -+ GLAMO_REG_LCD_MODE2 = REG_LCD(0x02), -+ GLAMO_REG_LCD_MODE3 = REG_LCD(0x04), -+ GLAMO_REG_LCD_WIDTH = REG_LCD(0x06), -+ GLAMO_REG_LCD_HEIGHT = REG_LCD(0x08), -+ GLAMO_REG_LCD_POLARITY = REG_LCD(0x0a), -+ GLAMO_REG_LCD_A_BASE1 = REG_LCD(0x0c), -+ GLAMO_REG_LCD_A_BASE2 = REG_LCD(0x0e), -+ GLAMO_REG_LCD_B_BASE1 = REG_LCD(0x10), -+ GLAMO_REG_LCD_B_BASE2 = REG_LCD(0x12), -+ GLAMO_REG_LCD_C_BASE1 = REG_LCD(0x14), -+ GLAMO_REG_LCD_C_BASE2 = REG_LCD(0x16), -+ GLAMO_REG_LCD_PITCH = REG_LCD(0x18), -+ /* RES */ -+ GLAMO_REG_LCD_HORIZ_TOTAL = REG_LCD(0x1c), -+ /* RES */ -+ GLAMO_REG_LCD_HORIZ_RETR_START = REG_LCD(0x20), -+ /* RES */ -+ GLAMO_REG_LCD_HORIZ_RETR_END = REG_LCD(0x24), -+ /* RES */ -+ GLAMO_REG_LCD_HORIZ_DISP_START = REG_LCD(0x28), -+ /* RES */ -+ GLAMO_REG_LCD_HORIZ_DISP_END = REG_LCD(0x2c), -+ /* RES */ -+ GLAMO_REG_LCD_VERT_TOTAL = REG_LCD(0x30), -+ /* RES */ -+ GLAMO_REG_LCD_VERT_RETR_START = REG_LCD(0x34), -+ /* RES */ -+ GLAMO_REG_LCD_VERT_RETR_END = REG_LCD(0x38), -+ /* RES */ -+ GLAMO_REG_LCD_VERT_DISP_START = REG_LCD(0x3c), -+ /* RES */ -+ GLAMO_REG_LCD_VERT_DISP_END = REG_LCD(0x40), -+ /* RES */ -+ GLAMO_REG_LCD_POL = REG_LCD(0x44), -+ GLAMO_REG_LCD_DATA_START = REG_LCD(0x46), -+ GLAMO_REG_LCD_FRATE_CONTRO = REG_LCD(0x48), -+ GLAMO_REG_LCD_DATA_CMD_HDR = REG_LCD(0x4a), -+ GLAMO_REG_LCD_SP_START = REG_LCD(0x4c), -+ GLAMO_REG_LCD_SP_END = REG_LCD(0x4e), -+ GLAMO_REG_LCD_CURSOR_BASE1 = REG_LCD(0x50), -+ GLAMO_REG_LCD_CURSOR_BASE2 = REG_LCD(0x52), -+ GLAMO_REG_LCD_CURSOR_PITCH = REG_LCD(0x54), -+ GLAMO_REG_LCD_CURSOR_X_SIZE = REG_LCD(0x56), -+ GLAMO_REG_LCD_CURSOR_Y_SIZE = REG_LCD(0x58), -+ GLAMO_REG_LCD_CURSOR_X_POS = REG_LCD(0x5a), -+ GLAMO_REG_LCD_CURSOR_Y_POS = REG_LCD(0x5c), -+ GLAMO_REG_LCD_CURSOR_PRESET = REG_LCD(0x5e), -+ GLAMO_REG_LCD_CURSOR_FG_COLOR = REG_LCD(0x60), -+ /* RES */ -+ GLAMO_REG_LCD_CURSOR_BG_COLOR = REG_LCD(0x64), -+ /* RES */ -+ GLAMO_REG_LCD_CURSOR_DST_COLOR = REG_LCD(0x68), -+ /* RES */ -+ GLAMO_REG_LCD_STATUS1 = REG_LCD(0x80), -+ GLAMO_REG_LCD_STATUS2 = REG_LCD(0x82), -+ GLAMO_REG_LCD_STATUS3 = REG_LCD(0x84), -+ GLAMO_REG_LCD_STATUS4 = REG_LCD(0x86), -+ /* RES */ -+ GLAMO_REG_LCD_COMMAND1 = REG_LCD(0xa0), -+ GLAMO_REG_LCD_COMMAND2 = REG_LCD(0xa2), -+ /* RES */ -+ GLAMO_REG_LCD_WFORM_DELAY1 = REG_LCD(0xb0), -+ GLAMO_REG_LCD_WFORM_DELAY2 = REG_LCD(0xb2), -+ /* RES */ -+ GLAMO_REG_LCD_GAMMA_CORR = REG_LCD(0x100), -+ /* RES */ -+ GLAMO_REG_LCD_GAMMA_R_ENTRY01 = REG_LCD(0x110), -+ GLAMO_REG_LCD_GAMMA_R_ENTRY23 = REG_LCD(0x112), -+ GLAMO_REG_LCD_GAMMA_R_ENTRY45 = REG_LCD(0x114), -+ GLAMO_REG_LCD_GAMMA_R_ENTRY67 = REG_LCD(0x116), -+ GLAMO_REG_LCD_GAMMA_R_ENTRY8 = REG_LCD(0x118), -+ /* RES */ -+ GLAMO_REG_LCD_GAMMA_G_ENTRY01 = REG_LCD(0x130), -+ GLAMO_REG_LCD_GAMMA_G_ENTRY23 = REG_LCD(0x132), -+ GLAMO_REG_LCD_GAMMA_G_ENTRY45 = REG_LCD(0x134), -+ GLAMO_REG_LCD_GAMMA_G_ENTRY67 = REG_LCD(0x136), -+ GLAMO_REG_LCD_GAMMA_G_ENTRY8 = REG_LCD(0x138), -+ /* RES */ -+ GLAMO_REG_LCD_GAMMA_B_ENTRY01 = REG_LCD(0x150), -+ GLAMO_REG_LCD_GAMMA_B_ENTRY23 = REG_LCD(0x152), -+ GLAMO_REG_LCD_GAMMA_B_ENTRY45 = REG_LCD(0x154), -+ GLAMO_REG_LCD_GAMMA_B_ENTRY67 = REG_LCD(0x156), -+ GLAMO_REG_LCD_GAMMA_B_ENTRY8 = REG_LCD(0x158), -+ /* RES */ -+ GLAMO_REG_LCD_SRAM_DRIVING1 = REG_LCD(0x160), -+ GLAMO_REG_LCD_SRAM_DRIVING2 = REG_LCD(0x162), -+ GLAMO_REG_LCD_SRAM_DRIVING3 = REG_LCD(0x164), -+}; -+ -+enum glamo_reg_lcd_mode1 { -+ GLAMO_LCD_MODE1_PWRSAVE = 0x0001, -+ GLAMO_LCD_MODE1_PARTIAL_PRT = 0x0002, -+ GLAMO_LCD_MODE1_HWFLIP = 0x0004, -+ GLAMO_LCD_MODE1_LCD2 = 0x0008, -+ /* RES */ -+ GLAMO_LCD_MODE1_PARTIAL_MODE = 0x0020, -+ GLAMO_LCD_MODE1_CURSOR_DSTCOLOR = 0x0040, -+ GLAMO_LCD_MODE1_PARTIAL_ENABLE = 0x0080, -+ GLAMO_LCD_MODE1_TVCLK_IN_ENABLE = 0x0100, -+ GLAMO_LCD_MODE1_HSYNC_HIGH_ACT = 0x0200, -+ GLAMO_LCD_MODE1_VSYNC_HIGH_ACT = 0x0400, -+ GLAMO_LCD_MODE1_HSYNC_FLIP = 0x0800, -+ GLAMO_LCD_MODE1_GAMMA_COR_EN = 0x1000, -+ GLAMO_LCD_MODE1_DITHER_EN = 0x2000, -+ GLAMO_LCD_MODE1_CURSOR_EN = 0x4000, -+ GLAMO_LCD_MODE1_ROTATE_EN = 0x8000, -+}; -+ -+enum glamo_reg_lcd_mode2 { -+ GLAMO_LCD_MODE2_CRC_CHECK_EN = 0x0001, -+ GLAMO_LCD_MODE2_DCMD_PER_LINE = 0x0002, -+ GLAMO_LCD_MODE2_NOUSE_BDEF = 0x0004, -+ GLAMO_LCD_MODE2_OUT_POS_MODE = 0x0008, -+ GLAMO_LCD_MODE2_FRATE_CTRL_EN = 0x0010, -+ GLAMO_LCD_MODE2_SINGLE_BUFFER = 0x0020, -+ GLAMO_LCD_MODE2_SER_LSB_TO_MSB = 0x0040, -+ /* FIXME */ -+}; -+ -+enum glamo_reg_lcd_mode3 { -+ /* LCD color source data format */ -+ GLAMO_LCD_SRC_RGB565 = 0x0000, -+ GLAMO_LCD_SRC_ARGB1555 = 0x4000, -+ GLAMO_LCD_SRC_ARGB4444 = 0x8000, -+ /* interface type */ -+ GLAMO_LCD_MODE3_LCD = 0x1000, -+ GLAMO_LCD_MODE3_RGB = 0x0800, -+ GLAMO_LCD_MODE3_CPU = 0x0000, -+ /* mode */ -+ GLAMO_LCD_MODE3_RGB332 = 0x0000, -+ GLAMO_LCD_MODE3_RGB444 = 0x0100, -+ GLAMO_LCD_MODE3_RGB565 = 0x0200, -+ GLAMO_LCD_MODE3_RGB666 = 0x0300, -+ /* depth */ -+ GLAMO_LCD_MODE3_6BITS = 0x0000, -+ GLAMO_LCD_MODE3_8BITS = 0x0010, -+ GLAMO_LCD_MODE3_9BITS = 0x0020, -+ GLAMO_LCD_MODE3_16BITS = 0x0030, -+ GLAMO_LCD_MODE3_18BITS = 0x0040, -+}; -+ -+enum glamo_lcd_rot_mode { -+ GLAMO_LCD_ROT_MODE_0 = 0x0000, -+ GLAMO_LCD_ROT_MODE_180 = 0x2000, -+ GLAMO_LCD_ROT_MODE_MIRROR = 0x4000, -+ GLAMO_LCD_ROT_MODE_FLIP = 0x6000, -+ GLAMO_LCD_ROT_MODE_90 = 0x8000, -+ GLAMO_LCD_ROT_MODE_270 = 0xa000, -+}; -+#define GLAMO_LCD_ROT_MODE_MASK 0xe000 -+ -+enum glamo_lcd_cmd_type { -+ GLAMO_LCD_CMD_TYPE_DISP = 0x0000, -+ GLAMO_LCD_CMD_TYPE_PARALLEL = 0x4000, -+ GLAMO_LCD_CMD_TYPE_SERIAL = 0x8000, -+ GLAMO_LCD_CMD_TYPE_SERIAL_DIRECT= 0xc000, -+}; -+#define GLAMO_LCD_CMD_TYPE_MASK 0xc000 -+ -+enum glamo_lcd_cmds { -+ GLAMO_LCD_CMD_DATA_DISP_FIRE = 0x00, -+ GLAMO_LCD_CMD_DATA_DISP_SYNC = 0x01, /* RGB only */ -+ /* switch to command mode, no display */ -+ GLAMO_LCD_CMD_DATA_FIRE_NO_DISP = 0x02, -+ /* display until VSYNC, switch to command */ -+ GLAMO_LCD_CMD_DATA_FIRE_VSYNC = 0x11, -+ /* display until HSYNC, switch to command */ -+ GLAMO_LCD_CMD_DATA_FIRE_HSYNC = 0x12, -+ /* display until VSYNC, 1 black frame, VSYNC, switch to command */ -+ GLAMO_LCD_CMD_DATA_FIRE_VSYNC_B = 0x13, -+ /* don't care about display and switch to command */ -+ GLAMO_LCD_CMD_DATA_FIRE_FREE = 0x14, /* RGB only */ -+ /* don't care about display, keep data display but disable data, -+ * and switch to command */ -+ GLAMO_LCD_CMD_DATA_FIRE_FREE_D = 0x15, /* RGB only */ -+}; -+ -+enum glamo_core_revisions { -+ GLAMO_CORE_REV_A0 = 0x0000, -+ GLAMO_CORE_REV_A1 = 0x0001, -+ GLAMO_CORE_REV_A2 = 0x0002, -+ GLAMO_CORE_REV_A3 = 0x0003, -+}; -+ -+#endif /* _GLAMO_REGS_H */ -Index: linux-2.6.24.7/drivers/mfd/glamo/glamo-spi-gpio.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/glamo-spi-gpio.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,288 @@ -+/* -+ * Copyright (C) 2007 Openmoko, Inc. -+ * Author: Harald Welte -+ * -+ * Smedia Glamo GPIO based SPI driver -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This driver currently only implements a minimum subset of the hardware -+ * features, esp. those features that are required to drive the jbt6k74 -+ * LCM controller asic in the TD028TTEC1 LCM. -+ * -+*/ -+ -+#define DEBUG -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+#include "glamo-core.h" -+#include "glamo-regs.h" -+ -+struct glamo_spigpio { -+ struct spi_bitbang bitbang; -+ struct spi_master *master; -+ struct glamo_spigpio_info *info; -+ struct glamo_core *glamo; -+}; -+ -+static inline struct glamo_spigpio *to_sg(struct spi_device *spi) -+{ -+ return spi->controller_data; -+} -+ -+static inline void setsck(struct spi_device *dev, int on) -+{ -+ struct glamo_spigpio *sg = to_sg(dev); -+ glamo_gpio_setpin(sg->glamo, sg->info->pin_clk, on ? 1 : 0); -+} -+ -+static inline void setmosi(struct spi_device *dev, int on) -+{ -+ struct glamo_spigpio *sg = to_sg(dev); -+ glamo_gpio_setpin(sg->glamo, sg->info->pin_mosi, on ? 1 : 0); -+} -+ -+static inline u32 getmiso(struct spi_device *dev) -+{ -+ struct glamo_spigpio *sg = to_sg(dev); -+ if (sg->info->pin_miso) -+ return glamo_gpio_getpin(sg->glamo, sg->info->pin_miso) ? 1 : 0; -+ else -+ return 0; -+} -+ -+#define spidelay(x) ndelay(x) -+ -+#define EXPAND_BITBANG_TXRX -+#include -+ -+static u32 glamo_spigpio_txrx_mode0(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); -+} -+ -+static u32 glamo_spigpio_txrx_mode1(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits); -+} -+ -+static u32 glamo_spigpio_txrx_mode2(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits); -+} -+ -+static u32 glamo_spigpio_txrx_mode3(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits); -+} -+ -+ -+#if 0 -+static int glamo_spigpio_setupxfer(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ struct glamo_spi *gs = to_sg(spi); -+ unsigned int bpw; -+ -+ bpw = t ? t->bits_per_word : spi->bits_per_word; -+ -+ if (bpw != 9 && bpw != 8) { -+ dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+#endif -+ -+static void glamo_spigpio_chipsel(struct spi_device *spi, int value) -+{ -+ struct glamo_spigpio *gs = to_sg(spi); -+#if 0 -+ dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n", -+ value, spi, gs, gs->info, gs->info->glamo); -+#endif -+ glamo_gpio_setpin(gs->glamo, gs->info->pin_cs, value ? 0 : 1); -+} -+ -+ -+static int glamo_spigpio_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct glamo_spigpio *sp; -+ int ret; -+ int i; -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spigpio)); -+ if (master == NULL) { -+ dev_err(&pdev->dev, "failed to allocate spi master\n"); -+ ret = -ENOMEM; -+ goto err; -+ } -+ -+ sp = spi_master_get_devdata(master); -+ platform_set_drvdata(pdev, sp); -+ sp->info = pdev->dev.platform_data; -+ if (!sp->info) { -+ dev_err(&pdev->dev, "can't operate without platform data\n"); -+ ret = -EIO; -+ goto err_no_pdev; -+ } -+ -+ master->num_chipselect = 1; -+ master->bus_num = 2; /* FIXME: use dynamic number */ -+ -+ sp->master = spi_master_get(master); -+ sp->glamo = sp->info->glamo; -+ -+ sp->bitbang.master = sp->master; -+ sp->bitbang.chipselect = glamo_spigpio_chipsel; -+ sp->bitbang.txrx_word[SPI_MODE_0] = glamo_spigpio_txrx_mode0; -+ sp->bitbang.txrx_word[SPI_MODE_1] = glamo_spigpio_txrx_mode1; -+ sp->bitbang.txrx_word[SPI_MODE_2] = glamo_spigpio_txrx_mode2; -+ sp->bitbang.txrx_word[SPI_MODE_3] = glamo_spigpio_txrx_mode3; -+ -+ /* set state of spi pins */ -+ glamo_gpio_setpin(sp->glamo, sp->info->pin_clk, 0); -+ glamo_gpio_setpin(sp->glamo, sp->info->pin_mosi, 0); -+ glamo_gpio_setpin(sp->glamo, sp->info->pin_cs, 1); -+ -+ glamo_gpio_cfgpin(sp->glamo, sp->info->pin_clk); -+ glamo_gpio_cfgpin(sp->glamo, sp->info->pin_mosi); -+ glamo_gpio_cfgpin(sp->glamo, sp->info->pin_cs); -+ if (sp->info->pin_miso) -+ glamo_gpio_cfgpin(sp->glamo, sp->info->pin_miso); -+ -+ /* bring the LCM panel out of reset if it isn't already */ -+ -+ glamo_gpio_setpin(sp->glamo, GLAMO_GPIO4, 1); -+ glamo_gpio_cfgpin(sp->glamo, GLAMO_GPIO4_OUTPUT); -+ msleep(90); -+ -+#if 0 -+ sp->dev = &pdev->dev; -+ -+ sp->bitbang.setup_transfer = glamo_spi_setupxfer; -+ sp->bitbang.txrx_bufs = glamo_spi_txrx; -+ sp->bitbang.master->setup = glamo_spi_setup; -+#endif -+ -+ ret = spi_bitbang_start(&sp->bitbang); -+ if (ret) -+ goto err_no_bitbang; -+ -+ /* register the chips to go with the board */ -+ -+ for (i = 0; i < sp->info->board_size; i++) { -+ dev_info(&pdev->dev, "registering %p: %s\n", -+ &sp->info->board_info[i], -+ sp->info->board_info[i].modalias); -+ -+ sp->info->board_info[i].controller_data = sp; -+ spi_new_device(master, sp->info->board_info + i); -+ } -+ -+ return 0; -+ -+err_no_bitbang: -+ platform_set_drvdata(pdev, NULL); -+err_no_pdev: -+ spi_master_put(sp->bitbang.master); -+err: -+ return ret; -+ -+} -+ -+static int glamo_spigpio_remove(struct platform_device *pdev) -+{ -+ struct glamo_spigpio *sp = platform_get_drvdata(pdev); -+ -+ spi_bitbang_stop(&sp->bitbang); -+ spi_master_put(sp->bitbang.master); -+ -+ return 0; -+} -+ -+/*#define glamo_spigpio_suspend NULL -+#define glamo_spigpio_resume NULL -+*/ -+ -+ -+#ifdef CONFIG_PM -+static int glamo_spigpio_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ return 0; -+} -+ -+static int glamo_spigpio_resume(struct platform_device *pdev) -+{ -+ struct glamo_spigpio *sp = platform_get_drvdata(pdev); -+ -+ if (!sp) -+ return 0; -+ -+ /* set state of spi pins */ -+ glamo_gpio_setpin(sp->glamo, sp->info->pin_clk, 0); -+ glamo_gpio_setpin(sp->glamo, sp->info->pin_mosi, 0); -+ glamo_gpio_setpin(sp->glamo, sp->info->pin_cs, 1); -+ -+ glamo_gpio_cfgpin(sp->glamo, sp->info->pin_clk); -+ glamo_gpio_cfgpin(sp->glamo, sp->info->pin_mosi); -+ glamo_gpio_cfgpin(sp->glamo, sp->info->pin_cs); -+ if (sp->info->pin_miso) -+ glamo_gpio_cfgpin(sp->glamo, sp->info->pin_miso); -+ -+ return 0; -+} -+#endif -+ -+static struct platform_driver glamo_spi_drv = { -+ .probe = glamo_spigpio_probe, -+ .remove = glamo_spigpio_remove, -+#ifdef CONFIG_PM -+ .suspend_late = glamo_spigpio_suspend, -+ .resume_early = glamo_spigpio_resume, -+#endif -+ .driver = { -+ .name = "glamo-spi-gpio", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init glamo_spi_init(void) -+{ -+ return platform_driver_register(&glamo_spi_drv); -+} -+ -+static void __exit glamo_spi_exit(void) -+{ -+ platform_driver_unregister(&glamo_spi_drv); -+} -+ -+module_init(glamo_spi_init); -+module_exit(glamo_spi_exit); -+ -+MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver"); -+MODULE_AUTHOR("Harald Welte ") -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/mfd/glamo/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,44 @@ -+config MFD_GLAMO -+ bool "Smedia Glamo 336x/337x support" -+ help -+ This enables the core driver for the Smedia Glamo 336x/337x -+ multi-function device. It includes irq_chip demultiplex as -+ well as clock / power management and GPIO support. -+ -+config MFD_GLAMO_FB -+ tristate "Smedia Glamo 336x/337x framebuffer support" -+ depends on FB && MFD_GLAMO -+ help -+ Frame buffer driver for the LCD controller in the Smedia Glamo -+ 336x/337x. -+ -+ This driver is also available as a module ( = code which can be -+ inserted and removed from the running kernel whenever you want). The -+ module will be called glamofb. If you want to compile it as a module, -+ say M here and read . -+ -+ If unsure, say N. -+ -+config MFD_GLAMO_SPI_GPIO -+ tristate "Glamo GPIO SPI bitbang support" -+ depends on MFD_GLAMO -+ help -+ Enable a bitbanging SPI adapter driver for the Smedia Glamo. -+ -+config MFD_GLAMO_SPI_FB -+ tristate "Glamo LCM control channel SPI support" -+ depends on MFD_GLAMO_FB -+ help -+ Enable a bitbanging SPI adapter driver for the Smedia Glamo LCM -+ control channel. This SPI interface is frequently used to -+ interconnect the LCM control interface. -+ -+config MFD_GLAMO_MCI -+ tristate "Glamo S3C SD/MMC Card Interface support" -+ depends on MFD_GLAMO && MMC -+ help -+ This selects a driver for the MCI interface found in -+ the S-Media GLAMO chip, as used in Openmoko -+ neo1973 GTA-02. -+ -+ If unsure, say N. -\ No newline at end of file -Index: linux-2.6.24.7/drivers/mfd/glamo/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mfd/glamo/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,12 @@ -+# -+# Makefile for the Smedia Glamo framebuffer driver -+# -+ -+obj-$(CONFIG_MFD_GLAMO) += glamo-core.o glamo-gpio.o -+obj-$(CONFIG_MFD_GLAMO_SPI) += glamo-spi.o -+obj-$(CONFIG_MFD_GLAMO_SPI_GPIO) += glamo-spi-gpio.o -+ -+obj-$(CONFIG_MFD_GLAMO_FB) += glamo-fb.o -+obj-$(CONFIG_MFD_GLAMO_SPI_FB) += glamo-lcm-spi.o -+obj-$(CONFIG_MFD_GLAMO_MCI) += glamo-mci.o -+ -Index: linux-2.6.24.7/drivers/mfd/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/mfd/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/mfd/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -15,6 +15,8 @@ config MFD_SM501 - interface. The device may be connected by PCI or local bus with - varying functions enabled. - -+source "drivers/mfd/glamo/Kconfig" -+ - endmenu - - menu "Multimedia Capabilities Port drivers" -Index: linux-2.6.24.7/drivers/mfd/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/mfd/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/mfd/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -3,6 +3,7 @@ - # - - obj-$(CONFIG_MFD_SM501) += sm501.o -+obj-$(CONFIG_MFD_GLAMO) += glamo/ - - obj-$(CONFIG_MCP) += mcp-core.o - obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o -Index: linux-2.6.24.7/drivers/mmc/host/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/mmc/host/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/mmc/host/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -130,3 +130,14 @@ config MMC_SPI - - If unsure, or if your system has no SPI master driver, say N. - -+config MMC_S3C -+ tristate "Samsung S3C24xx SD/MMC Card Interface support" -+ depends on ARCH_S3C2410 && MMC -+ help -+ This selects a driver for the MCI interface found in -+ Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. -+ If you have a board based on one of those and a MMC/SD -+ slot, say Y or M here. -+ -+ If unsure, say N. -+ -Index: linux-2.6.24.7/drivers/mmc/host/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/mmc/host/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/mmc/host/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -17,4 +17,4 @@ obj-$(CONFIG_MMC_OMAP) += omap.o - obj-$(CONFIG_MMC_AT91) += at91_mci.o - obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o - obj-$(CONFIG_MMC_SPI) += mmc_spi.o -- -+obj-$(CONFIG_MMC_S3C) += s3cmci.o -Index: linux-2.6.24.7/drivers/mmc/host/s3cmci.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mmc/host/s3cmci.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,1563 @@ -+/* -+ * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver -+ * -+ * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel -+ * Copyright (C) 2007 Harald Welte -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "s3cmci.h" -+ -+#define DRIVER_NAME "s3c-mci" -+ -+static spinlock_t clock_lock; -+ -+/* -+ * Max SD clock rate (in Hz) -+ * -+ * you can override this on the kernel command line using -+ * -+ * s3cmci.sd_max_clk=10000000 -+ * -+ * for example. -+ */ -+ -+static int sd_max_clk = 25000000; -+module_param(sd_max_clk, int, 0644); -+ -+/* -+ * SD allow SD clock to run while idle -+ * -+ * you can override this on kernel commandline using -+ * -+ * s3cmci.sd_idleclk=0 -+ * -+ * for example. -+ */ -+ -+static int sd_idleclk; /* disallow idle clock by default */ -+module_param(sd_idleclk, int, 0644); -+ -+/* -+ * Slow SD clock rate -+ * -+ * you can override this on kernel commandline using -+ * -+ * s3cmci.sd_slow_ratio=8 -+ * -+ * for example. -+ * -+ * A platform callback is used to decide effective clock rate. If not -+ * defined, then the max is used, if defined and the callback returns -+ * nonzero, the rate is divided by this factor. -+ */ -+ -+static int sd_slow_ratio = 8; -+module_param(sd_slow_ratio, int, 0644); -+ -+/* used to stash real idleclk state in suspend: we force it to run in there */ -+static int suspend_sd_idleclk; -+ -+enum dbg_channels { -+ dbg_err = (1 << 0), -+ dbg_debug = (1 << 1), -+ dbg_info = (1 << 2), -+ dbg_irq = (1 << 3), -+ dbg_sg = (1 << 4), -+ dbg_dma = (1 << 5), -+ dbg_pio = (1 << 6), -+ dbg_fail = (1 << 7), -+ dbg_conf = (1 << 8), -+}; -+ -+static const int dbgmap_err = dbg_err | dbg_fail; -+static const int dbgmap_info = dbg_info | dbg_conf; -+static const int dbgmap_debug = dbg_debug; -+ -+#define dbg(host, channels, args...) \ -+ do { \ -+ if (dbgmap_err & channels) \ -+ dev_err(&host->pdev->dev, args); \ -+ else if (dbgmap_info & channels) \ -+ dev_info(&host->pdev->dev, args);\ -+ else if (dbgmap_debug & channels) \ -+ dev_dbg(&host->pdev->dev, args); \ -+ } while (0) -+ -+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) -+ -+static struct s3c2410_dma_client s3cmci_dma_client = { -+ .name = "s3c-mci", -+}; -+ -+static void finalize_request(struct s3cmci_host *host); -+static void s3cmci_send_request(struct mmc_host *mmc); -+static void s3cmci_reset(struct s3cmci_host *host); -+ -+#ifdef CONFIG_MMC_DEBUG -+static inline void dbg_dumpregs(struct s3cmci_host *host, char *prefix) -+{ -+ u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize; -+ u32 datcon, datcnt, datsta, fsta, imask; -+ -+ con = readl(host->base + S3C2410_SDICON); -+ pre = readl(host->base + S3C2410_SDIPRE); -+ cmdarg = readl(host->base + S3C2410_SDICMDARG); -+ cmdcon = readl(host->base + S3C2410_SDICMDCON); -+ cmdsta = readl(host->base + S3C2410_SDICMDSTAT); -+ r0 = readl(host->base + S3C2410_SDIRSP0); -+ r1 = readl(host->base + S3C2410_SDIRSP1); -+ r2 = readl(host->base + S3C2410_SDIRSP2); -+ r3 = readl(host->base + S3C2410_SDIRSP3); -+ timer = readl(host->base + S3C2410_SDITIMER); -+ bsize = readl(host->base + S3C2410_SDIBSIZE); -+ datcon = readl(host->base + S3C2410_SDIDCON); -+ datcnt = readl(host->base + S3C2410_SDIDCNT); -+ datsta = readl(host->base + S3C2410_SDIDSTA); -+ fsta = readl(host->base + S3C2410_SDIFSTA); -+ imask = readl(host->base + host->sdiimsk); -+ -+ dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n", -+ prefix, con, pre, timer); -+ -+ dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n", -+ prefix, cmdcon, cmdarg, cmdsta); -+ -+ dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]" -+ " DSTA:[%08x] DCNT:[%08x]\n", -+ prefix, datcon, fsta, datsta, datcnt); -+ -+ dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]" -+ " R2:[%08x] R3:[%08x]\n", -+ prefix, r0, r1, r2, r3); -+} -+ -+static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, -+ int stop) -+{ -+ snprintf(host->dbgmsg_cmd, 300, -+ "#%u%s op:CMD%d arg:0x%08x flags:0x08%x retries:%u", -+ host->ccnt, (stop?" (STOP)":""), cmd->opcode, -+ cmd->arg, cmd->flags, cmd->retries); -+ -+ if (cmd->data) { -+ snprintf(host->dbgmsg_dat, 300, -+ "#%u bsize:%u blocks:%u bytes:%u", -+ host->dcnt, cmd->data->blksz, -+ cmd->data->blocks, -+ cmd->data->blocks * cmd->data->blksz); -+ } else { -+ host->dbgmsg_dat[0] = '\0'; -+ } -+} -+ -+static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd, -+ int fail) -+{ -+ unsigned int dbglvl = fail?dbg_fail:dbg_debug; -+ -+ if (!cmd) -+ return; -+ -+ if (cmd->error == 0) -+ dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n", -+ host->dbgmsg_cmd, cmd->resp[0]); -+ else -+ dbg(host, dbglvl, "CMD[FAIL(%d)] %s Status:%s\n", -+ cmd->error, host->dbgmsg_cmd, host->status); -+ -+ if (!cmd->data) -+ return; -+ -+ if (cmd->data->error == 0) -+ dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat); -+ else -+ dbg(host, dbglvl, "DAT[FAIL(%d)] %s DCNT:0x%08x\n", -+ cmd->data->error, host->dbgmsg_dat, -+ readl(host->base + S3C2410_SDIDCNT)); -+} -+#endif /* CONFIG_MMC_DEBUG */ -+ -+static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) -+{ -+ u32 newmask; -+ -+ newmask = readl(host->base + host->sdiimsk); -+ newmask |= imask; -+ -+ writel(newmask, host->base + host->sdiimsk); -+ -+ return newmask; -+} -+ -+static inline u32 disable_imask(struct s3cmci_host *host, u32 imask) -+{ -+ u32 newmask; -+ -+ newmask = readl(host->base + host->sdiimsk); -+ newmask &= ~imask; -+ -+ writel(newmask, host->base + host->sdiimsk); -+ -+ return newmask; -+} -+ -+static inline void clear_imask(struct s3cmci_host *host) -+{ -+ writel(0, host->base + host->sdiimsk); -+} -+ -+static inline int get_data_buffer(struct s3cmci_host *host, -+ u32 *bytes, u8 **pointer) -+{ -+ struct scatterlist *sg; -+ -+ if (host->pio_active == XFER_NONE) -+ return -EINVAL; -+ -+ if ((!host->mrq) || (!host->mrq->data)) -+ return -EINVAL; -+ -+ if (host->pio_sgptr >= host->mrq->data->sg_len) { -+ dbg(host, dbg_debug, "no more buffers (%i/%i)\n", -+ host->pio_sgptr, host->mrq->data->sg_len); -+ return -EBUSY; -+ } -+ sg = &host->mrq->data->sg[host->pio_sgptr]; -+ -+ *bytes = sg->length; -+ *pointer = page_address(sg_page(sg)) + sg->offset; -+ -+ host->pio_sgptr++; -+ -+ dbg(host, dbg_sg, "new buffer (%i/%i)\n", -+ host->pio_sgptr, host->mrq->data->sg_len); -+ -+ return 0; -+} -+ -+#define FIFO_FILL(host) (readl(host->base + S3C2410_SDIFSTA) & \ -+ S3C2410_SDIFSTA_COUNTMASK) -+#define FIFO_FREE(host) (63 - (readl(host->base + S3C2410_SDIFSTA) \ -+ & S3C2410_SDIFSTA_COUNTMASK)) -+ -+static inline void do_pio_read(struct s3cmci_host *host) -+{ -+ int res; -+ int fifo; -+ void __iomem *from_ptr; -+ -+ /* write real prescaler to host, it might be set slow to fix */ -+ writel(host->sdipre, host->base + S3C2410_SDIPRE); -+ -+ from_ptr = host->base + host->sdidata; -+ -+ while ((fifo = FIFO_FILL(host))) { -+ if (!host->pio_bytes) { -+ res = get_data_buffer(host, &host->pio_bytes, -+ &host->pio_ptr); -+ if (res) { -+ host->pio_active = XFER_NONE; -+ host->complete_what = COMPLETION_FINALIZE; -+ -+ dbg(host, dbg_pio, "pio_read(): " -+ "complete (no more data).\n"); -+ return; -+ } -+ -+ dbg(host, dbg_pio, "pio_read(): new target: " -+ "[%i]@[%p]\n", host->pio_bytes, host->pio_ptr); -+ } -+ -+ dbg(host, dbg_pio, "pio_read(): fifo:[%02i] " -+ "buffer:[%03i] dcnt:[%08X]\n", fifo, host->pio_bytes, -+ readl(host->base + S3C2410_SDIDCNT)); -+ -+ if (fifo > host->pio_bytes) -+ fifo = host->pio_bytes; -+ -+ host->pio_bytes -= fifo; -+ host->pio_count += fifo; -+ -+ /* we might have an unaligned start of data */ -+ while (((unsigned long)host->pio_ptr & 0x03) && fifo) { -+ *(host->pio_ptr++) = readb(host->base + host->sdidata_b); -+ fifo--; -+ } -+ -+ /* and a major chunk of data in the middle */ -+ for (; fifo >= 4; fifo -=4) { -+ *(u32 *) host->pio_ptr = readl(from_ptr); -+ host->pio_ptr+= 4; -+ } -+ -+ /* as well as some non-modulo-four trailer */ -+ while (fifo) { -+ *(host->pio_ptr++) = readb(host->base + host->sdidata_b); -+ fifo--; -+ } -+ } -+ -+ if (!host->pio_bytes) { -+ res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); -+ if (res) { -+ dbg(host, dbg_pio, "pio_read(): " -+ "complete (no more buffers).\n"); -+ host->pio_active = XFER_NONE; -+ host->complete_what = COMPLETION_FINALIZE; -+ -+ return; -+ } -+ } -+ -+ enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF -+ | S3C2410_SDIIMSK_RXFIFOLAST); -+} -+ -+static inline void do_pio_write(struct s3cmci_host *host) -+{ -+ int res; -+ int fifo; -+ -+ void __iomem *to_ptr; -+ -+ to_ptr = host->base + host->sdidata; -+ -+ while ((fifo = FIFO_FREE(host))) { -+ if (!host->pio_bytes) { -+ res = get_data_buffer(host, &host->pio_bytes, -+ &host->pio_ptr); -+ if (res) { -+ dbg(host, dbg_pio, "pio_write(): " -+ "complete (no more data).\n"); -+ host->pio_active = XFER_NONE; -+ -+ return; -+ } -+ -+ dbg(host, dbg_pio, "pio_write(): " -+ "new source: [%i]@[%p]\n", -+ host->pio_bytes, host->pio_ptr); -+ -+ } -+ -+ if (fifo > host->pio_bytes) -+ fifo = host->pio_bytes; -+ -+ host->pio_bytes -= fifo; -+ host->pio_count += fifo; -+ -+ /* we might have an unaligned start of data */ -+ while (((unsigned long)host->pio_ptr & 0x03) && fifo) { -+ writeb(*(host->pio_ptr++), host->base + host->sdidata_b); -+ fifo--; -+ } -+ -+ /* and a major chunk of data in the middle */ -+ for (; fifo >= 4; fifo -=4) { -+ writel(*(u32 *) host->pio_ptr, to_ptr); -+ host->pio_ptr += 4; -+ } -+ -+ /* as well as some non-modulo-four trailer */ -+ while (fifo) { -+ writeb(*(host->pio_ptr++), host->base + host->sdidata_b); -+ fifo--; -+ } -+ } -+ -+ enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); -+} -+ -+static void pio_tasklet(unsigned long data) -+{ -+ struct s3cmci_host *host = (struct s3cmci_host *) data; -+ -+ disable_irq(host->irq); -+ -+ if (host->pio_active == XFER_WRITE) -+ do_pio_write(host); -+ -+ if (host->pio_active == XFER_READ) -+ do_pio_read(host); -+ -+ if (host->complete_what == COMPLETION_FINALIZE) { -+ clear_imask(host); -+ if (host->pio_active != XFER_NONE) { -+ dbg(host, dbg_err, "unfinished %s " -+ "- pio_count:[%u] pio_bytes:[%u]\n", -+ (host->pio_active == XFER_READ)?"read":"write", -+ host->pio_count, host->pio_bytes); -+ -+ host->mrq->data->error = -EIO; -+ } -+ -+ finalize_request(host); -+ } else -+ enable_irq(host->irq); -+} -+ -+static void __s3cmci_enable_clock(struct s3cmci_host *host) -+{ -+ u32 mci_con; -+ unsigned long flags; -+ -+ /* enable the clock if clock rate is > 0 */ -+ if (host->real_rate) { -+ spin_lock_irqsave(&clock_lock, flags); -+ -+ mci_con = readl(host->base + S3C2410_SDICON); -+ mci_con |= S3C2410_SDICON_CLOCKTYPE; -+ writel(mci_con, host->base + S3C2410_SDICON); -+ -+ spin_unlock_irqrestore(&clock_lock, flags); -+ } -+} -+ -+static void __s3cmci_disable_clock(struct s3cmci_host *host) -+{ -+ u32 mci_con; -+ unsigned long flags; -+ -+ if (!sd_idleclk) { -+ spin_lock_irqsave(&clock_lock, flags); -+ -+ mci_con = readl(host->base + S3C2410_SDICON); -+ mci_con &= ~S3C2410_SDICON_CLOCKTYPE; -+ writel(mci_con, host->base + S3C2410_SDICON); -+ -+ spin_unlock_irqrestore(&clock_lock, flags); -+ } -+} -+ -+ -+/* -+ * ISR for SDI Interface IRQ -+ * Communication between driver and ISR works as follows: -+ * host->mrq points to current request -+ * host->complete_what tells ISR when the request is considered done -+ * COMPLETION_CMDSENT when the command was sent -+ * COMPLETION_RSPFIN when a response was received -+ * COMPLETION_XFERFINISH when the data transfer is finished -+ * COMPLETION_XFERFINISH_RSPFIN both of the above. -+ * host->complete_request is the completion-object the driver waits for -+ * -+ * 1) Driver sets up host->mrq and host->complete_what -+ * 2) Driver prepares the transfer -+ * 3) Driver enables interrupts -+ * 4) Driver starts transfer -+ * 5) Driver waits for host->complete_rquest -+ * 6) ISR checks for request status (errors and success) -+ * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error -+ * 7) ISR completes host->complete_request -+ * 8) ISR disables interrupts -+ * 9) Driver wakes up and takes care of the request -+ * -+ * Note: "->error"-fields are expected to be set to 0 before the request -+ * was issued by mmc.c - therefore they are only set, when an error -+ * contition comes up -+ */ -+ -+static irqreturn_t s3cmci_irq(int irq, void *dev_id) -+{ -+ struct s3cmci_host *host; -+ struct mmc_command *cmd; -+ u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk; -+ u32 mci_cclear, mci_dclear; -+ unsigned long iflags; -+ int cardint = 0; -+ -+ host = (struct s3cmci_host *)dev_id; -+ -+ spin_lock_irqsave(&host->complete_lock, iflags); -+ -+ mci_csta = readl(host->base + S3C2410_SDICMDSTAT); -+ mci_dsta = readl(host->base + S3C2410_SDIDSTA); -+ mci_dcnt = readl(host->base + S3C2410_SDIDCNT); -+ mci_fsta = readl(host->base + S3C2410_SDIFSTA); -+ mci_imsk = readl(host->base + host->sdiimsk); -+ mci_cclear = 0; -+ mci_dclear = 0; -+ -+ if ((host->complete_what == COMPLETION_NONE) || -+ (host->complete_what == COMPLETION_FINALIZE)) { -+ host->status = "nothing to complete"; -+ clear_imask(host); -+ goto irq_out; -+ } -+ -+ if (!host->mrq) { -+ host->status = "no active mrq"; -+ clear_imask(host); -+ goto irq_out; -+ } -+ -+ cmd = host->cmd_is_stop?host->mrq->stop:host->mrq->cmd; -+ -+ if (!cmd) { -+ host->status = "no active cmd"; -+ clear_imask(host); -+ goto irq_out; -+ } -+ -+ if (!host->dodma) { -+ if ((host->pio_active == XFER_WRITE) && -+ (mci_fsta & S3C2410_SDIFSTA_TFDET)) { -+ -+ disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); -+ tasklet_schedule(&host->pio_tasklet); -+ host->status = "pio tx"; -+ } -+ -+ if ((host->pio_active == XFER_READ) && -+ (mci_fsta & S3C2410_SDIFSTA_RFDET)) { -+ -+ disable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF | -+ S3C2410_SDIIMSK_RXFIFOLAST); -+ -+ tasklet_schedule(&host->pio_tasklet); -+ host->status = "pio rx"; -+ } -+ } -+ -+ if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { -+ cmd->error = -ETIMEDOUT; -+ host->status = "error: command timeout"; -+ goto fail_transfer; -+ } -+ -+ if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) { -+ if (host->complete_what == COMPLETION_CMDSENT) { -+ host->status = "ok: command sent"; -+ goto close_transfer; -+ } -+ -+ mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT; -+ } -+ -+ if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) { -+ if (cmd->flags & MMC_RSP_CRC) { -+ if (host->mrq->cmd->flags & MMC_RSP_136) { -+ dbg(host, dbg_irq, "fixup for chip bug: " -+ "ignore CRC fail with long rsp\n"); -+ } else { -+ cmd->error = -EILSEQ; -+ host->status = "error: bad command crc"; -+ goto fail_transfer; -+ } -+ } -+ -+ mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL; -+ } -+ -+ if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) { -+ if (host->complete_what == COMPLETION_RSPFIN) { -+ host->status = "ok: command response received"; -+ goto close_transfer; -+ } -+ -+ if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) -+ host->complete_what = COMPLETION_XFERFINISH; -+ -+ mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN; -+ } -+ -+ /* errors handled after this point are only relevant -+ when a data transfer is in progress */ -+ -+ if (!cmd->data) -+ goto clear_status_bits; -+ -+ /* Check for FIFO failure */ -+ if (host->is2440) { -+ if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { -+ host->mrq->data->error = -EIO; -+ host->status = "error: 2440 fifo failure"; -+ goto fail_transfer; -+ } -+ } else { -+ if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { -+ cmd->data->error = -EIO; -+ host->status = "error: fifo failure"; -+ goto fail_transfer; -+ } -+ } -+ -+ if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { -+ cmd->data->error = -EILSEQ; -+ host->status = "error: bad data crc (outgoing)"; -+ goto fail_transfer; -+ } -+ -+ if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { -+ cmd->data->error = -EIO; -+ host->status = "error: bad data crc (incoming)"; -+ goto fail_transfer; -+ } -+ -+ if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { -+ cmd->data->error = -ETIMEDOUT; -+ host->status = "error: data timeout"; -+ goto fail_transfer; -+ } -+ -+ if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) { -+ if (host->complete_what == COMPLETION_XFERFINISH) { -+ host->status = "ok: data transfer completed"; -+ goto close_transfer; -+ } -+ -+ if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) -+ host->complete_what = COMPLETION_RSPFIN; -+ -+ mci_dclear |= S3C2410_SDIDSTA_XFERFINISH; -+ } -+ -+ if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) { -+ cardint = 1; -+ mci_dclear |= S3C2410_SDIDSTA_SDIOIRQDETECT; -+ } -+ -+clear_status_bits: -+ writel(mci_cclear, host->base + S3C2410_SDICMDSTAT); -+ writel(mci_dclear, host->base + S3C2410_SDIDSTA); -+ -+ goto irq_out; -+ -+fail_transfer: -+ host->pio_active = XFER_NONE; -+ -+close_transfer: -+ host->complete_what = COMPLETION_FINALIZE; -+ -+ clear_imask(host); -+ tasklet_schedule(&host->pio_tasklet); -+ -+ goto irq_out; -+ -+irq_out: -+ dbg(host, dbg_irq, "csta:0x%08x dsta:0x%08x " -+ "fsta:0x%08x dcnt:0x%08x status:%s.\n", -+ mci_csta, mci_dsta, mci_fsta, -+ mci_dcnt, host->status); -+ -+ spin_unlock_irqrestore(&host->complete_lock, iflags); -+ -+ /* We have to delay this as it calls back into the driver */ -+ if (cardint) -+ mmc_signal_sdio_irq(host->mmc); -+ -+ return IRQ_HANDLED; -+ -+} -+ -+/* -+ * ISR for the CardDetect Pin -+*/ -+ -+static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) -+{ -+ struct s3cmci_host *host = (struct s3cmci_host *)dev_id; -+ -+ dbg(host, dbg_irq, "card detect\n"); -+ -+ mmc_detect_change(host->mmc, 500); -+ -+ return IRQ_HANDLED; -+} -+ -+void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id, -+ int size, enum s3c2410_dma_buffresult result) -+{ -+ unsigned long iflags; -+ u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt; -+ struct s3cmci_host *host = (struct s3cmci_host *)buf_id; -+ -+ mci_csta = readl(host->base + S3C2410_SDICMDSTAT); -+ mci_dsta = readl(host->base + S3C2410_SDIDSTA); -+ mci_fsta = readl(host->base + S3C2410_SDIFSTA); -+ mci_dcnt = readl(host->base + S3C2410_SDIDCNT); -+ -+ if ((!host->mrq) || (!host->mrq) || (!host->mrq->data)) -+ return; -+ -+ if (!host->dmatogo) -+ return; -+ -+ spin_lock_irqsave(&host->complete_lock, iflags); -+ -+ if (result != S3C2410_RES_OK) { -+ dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x " -+ "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n", -+ mci_csta, mci_dsta, mci_fsta, -+ mci_dcnt, result, host->dmatogo); -+ -+ goto fail_request; -+ } -+ -+ host->dmatogo--; -+ if (host->dmatogo) { -+ dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] " -+ "DCNT:[%08x] toGo:%u\n", -+ size, mci_dsta, mci_dcnt, host->dmatogo); -+ -+ goto out; -+ } -+ -+ dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n", -+ size, mci_dsta, mci_dcnt); -+ -+ host->complete_what = COMPLETION_FINALIZE; -+ -+out: -+ tasklet_schedule(&host->pio_tasklet); -+ spin_unlock_irqrestore(&host->complete_lock, iflags); -+ return; -+ -+ -+fail_request: -+ host->mrq->data->error = -EIO; -+ host->complete_what = COMPLETION_FINALIZE; -+ writel(0, host->base + host->sdiimsk); -+ goto out; -+ -+} -+ -+static void finalize_request(struct s3cmci_host *host) -+{ -+ struct mmc_request *mrq = host->mrq; -+ struct mmc_command *cmd = host->cmd_is_stop?mrq->stop:mrq->cmd; -+ int debug_as_failure = 0; -+ -+ if (host->complete_what != COMPLETION_FINALIZE) -+ return; -+ -+ if (!mrq) -+ return; -+ -+ if (cmd->data && (cmd->error == 0) && -+ (cmd->data->error == 0)) { -+ -+ if (host->dodma && (!host->dma_complete)) { -+ dbg(host, dbg_dma, "DMA Missing!\n"); -+ return; -+ } -+ } -+ -+ /* Read response */ -+ cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0); -+ cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1); -+ cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2); -+ cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3); -+ -+ /* reset clock speed, as it could still be set low for */ -+ writel(host->sdipre, host->base + S3C2410_SDIPRE); -+ -+ if (cmd->error) -+ debug_as_failure = 1; -+ -+ if (cmd->data && cmd->data->error) -+ debug_as_failure = 1; -+ -+#ifdef CONFIG_MMC_DEBUG -+ dbg_dumpcmd(host, cmd, debug_as_failure); -+#endif -+ /* Cleanup controller */ -+ writel(0, host->base + S3C2410_SDICMDARG); -+ writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); -+ writel(0, host->base + S3C2410_SDICMDCON); -+ writel(0, host->base + host->sdiimsk); -+ -+ if (cmd->data && cmd->error) -+ cmd->data->error = cmd->error; -+ -+ if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) { -+ host->cmd_is_stop = 1; -+ s3cmci_send_request(host->mmc); -+ return; -+ } -+ -+ /* If we have no data transfer we are finished here */ -+ if (!mrq->data) -+ goto request_done; -+ -+ /* Calulate the amout of bytes transfer, but only if there was -+ * no error */ -+ if (mrq->data->error == 0) -+ mrq->data->bytes_xfered = -+ (mrq->data->blocks * mrq->data->blksz); -+ else -+ mrq->data->bytes_xfered = 0; -+ -+ /* If we had an error while transfering data we flush the -+ * DMA channel and the fifo to clear out any garbage */ -+ if (mrq->data->error) { -+ if (host->dodma) -+ s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); -+ -+ if (host->is2440) { -+ /* Clear failure register and reset fifo */ -+ writel(S3C2440_SDIFSTA_FIFORESET | -+ S3C2440_SDIFSTA_FIFOFAIL, -+ host->base + S3C2410_SDIFSTA); -+ } else { -+ u32 mci_con; -+ -+ /* reset fifo */ -+ mci_con = readl(host->base + S3C2410_SDICON); -+ mci_con |= S3C2410_SDICON_FIFORESET; -+ -+ writel(mci_con, host->base + S3C2410_SDICON); -+ } -+ } -+ -+request_done: -+ __s3cmci_disable_clock(host); -+ host->complete_what = COMPLETION_NONE; -+ host->mrq = NULL; -+ mmc_request_done(host->mmc, mrq); -+} -+ -+ -+void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source) -+{ -+ static int setup_ok; -+ static enum s3c2410_dmasrc last_source = -1; -+ -+ if (last_source == source) -+ return; -+ -+ last_source = source; -+ -+ s3c2410_dma_devconfig(host->dma, source, 3, -+ host->mem->start + host->sdidata); -+ -+ if (!setup_ok) { -+ s3c2410_dma_config(host->dma, 4, -+ (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); -+ s3c2410_dma_set_buffdone_fn(host->dma, -+ s3cmci_dma_done_callback); -+ s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); -+ setup_ok = 1; -+ } -+} -+ -+static void s3cmci_send_command(struct s3cmci_host *host, -+ struct mmc_command *cmd) -+{ -+ u32 ccon, imsk; -+ -+ imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT | -+ S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT | -+ S3C2410_SDIIMSK_RESPONSECRC; -+ -+ enable_imask(host, imsk); -+ -+ if (cmd->data) -+ host->complete_what = COMPLETION_XFERFINISH_RSPFIN; -+ else if (cmd->flags & MMC_RSP_PRESENT) -+ host->complete_what = COMPLETION_RSPFIN; -+ else -+ host->complete_what = COMPLETION_CMDSENT; -+ -+ writel(cmd->arg, host->base + S3C2410_SDICMDARG); -+ -+ ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX; -+ ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART; -+ -+ if (cmd->flags & MMC_RSP_PRESENT) -+ ccon |= S3C2410_SDICMDCON_WAITRSP; -+ -+ if (cmd->flags & MMC_RSP_136) -+ ccon |= S3C2410_SDICMDCON_LONGRSP; -+ -+ writel(ccon, host->base + S3C2410_SDICMDCON); -+} -+ -+static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) -+{ -+ u32 dcon, imsk, stoptries = 3; -+ -+ /* write DCON register */ -+ -+ if (!data) { -+ writel(0, host->base + S3C2410_SDIDCON); -+ return 0; -+ } -+ -+ while (readl(host->base + S3C2410_SDIDSTA) & -+ (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) { -+ -+ dbg(host, dbg_err, -+ "mci_setup_data() transfer stillin progress.\n"); -+ -+ writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); -+ s3cmci_reset(host); -+ -+ if (0 == (stoptries--)) { -+#ifdef CONFIG_MMC_DEBUG -+ dbg_dumpregs(host, "DRF"); -+#endif -+ -+ return -EINVAL; -+ } -+ } -+ -+ dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; -+ -+ if (host->dodma) -+ dcon |= S3C2410_SDIDCON_DMAEN; -+ -+ if (host->bus_width == MMC_BUS_WIDTH_4) -+ dcon |= S3C2410_SDIDCON_WIDEBUS; -+ -+ if (!(data->flags & MMC_DATA_STREAM)) -+ dcon |= S3C2410_SDIDCON_BLOCKMODE; -+ -+ if (data->flags & MMC_DATA_WRITE) { -+ dcon |= S3C2410_SDIDCON_TXAFTERRESP; -+ dcon |= S3C2410_SDIDCON_XFER_TXSTART; -+ } -+ -+ if (data->flags & MMC_DATA_READ) { -+ dcon |= S3C2410_SDIDCON_RXAFTERCMD; -+ dcon |= S3C2410_SDIDCON_XFER_RXSTART; -+ } -+ -+ if (host->is2440) { -+ dcon |= S3C2440_SDIDCON_DS_WORD; -+ dcon |= S3C2440_SDIDCON_DATSTART; -+ } -+ -+ writel(dcon, host->base + S3C2410_SDIDCON); -+ -+ /* write BSIZE register */ -+ -+ writel(data->blksz, host->base + S3C2410_SDIBSIZE); -+ -+ /* add to IMASK register */ -+ imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC | -+ S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH; -+ -+ enable_imask(host, imsk); -+ -+ /* write TIMER register */ -+ -+ if (host->is2440) { -+ writel(0x007FFFFF, host->base + S3C2410_SDITIMER); -+ } else { -+ writel(0x0000FFFF, host->base + S3C2410_SDITIMER); -+ -+ /* FIX: set slow clock to prevent timeouts on read */ -+ if (data->flags & MMC_DATA_READ) -+ writel(0xFF, host->base + S3C2410_SDIPRE); -+ } -+ -+ return 0; -+} -+ -+static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) -+{ -+ int rw = (data->flags & MMC_DATA_WRITE)?1:0; -+ -+ if (rw != ((data->flags & MMC_DATA_READ)?0:1)) -+ return -EINVAL; -+ -+ host->pio_sgptr = 0; -+ host->pio_bytes = 0; -+ host->pio_count = 0; -+ host->pio_active = rw?XFER_WRITE:XFER_READ; -+ -+ if (rw) { -+ do_pio_write(host); -+ enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); -+ } else { -+ enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF -+ | S3C2410_SDIIMSK_RXFIFOLAST); -+ } -+ -+ return 0; -+} -+ -+static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) -+{ -+ int dma_len, i; -+ -+ int rw = (data->flags & MMC_DATA_WRITE)?1:0; -+ -+ if (rw != ((data->flags & MMC_DATA_READ)?0:1)) -+ return -EINVAL; -+ -+ s3cmci_dma_setup(host, rw?S3C2410_DMASRC_MEM:S3C2410_DMASRC_HW); -+ s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); -+ -+ dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, -+ (rw)?DMA_TO_DEVICE:DMA_FROM_DEVICE); -+ -+ -+ if (dma_len == 0) -+ return -ENOMEM; -+ -+ host->dma_complete = 0; -+ host->dmatogo = dma_len; -+ -+ for (i = 0; i < dma_len; i++) { -+ int res; -+ -+ dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i, -+ sg_dma_address(&data->sg[i]), -+ sg_dma_len(&data->sg[i])); -+ -+ res = s3c2410_dma_enqueue(host->dma, (void *) host, -+ sg_dma_address(&data->sg[i]), -+ sg_dma_len(&data->sg[i])); -+ -+ if (res) { -+ s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); -+ return -EBUSY; -+ } -+ } -+ -+ s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START); -+ -+ return 0; -+} -+ -+static void s3cmci_send_request(struct mmc_host *mmc) -+{ -+ struct s3cmci_host *host = mmc_priv(mmc); -+ struct mmc_request *mrq = host->mrq; -+ struct mmc_command *cmd = host->cmd_is_stop?mrq->stop:mrq->cmd; -+ int pre; -+ -+ host->ccnt++; -+#ifdef CONFIG_MMC_DEBUG -+ prepare_dbgmsg(host, cmd, host->cmd_is_stop); -+#endif -+ /* clear command, data and fifo status registers; -+ * Fifo clear only necessary on 2440, but doesn't hurt on 2410 */ -+ writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT); -+ writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA); -+ writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA); -+ -+ if (cmd->data) { -+ int res; -+ res = s3cmci_setup_data(host, cmd->data); -+ -+ host->dcnt++; -+ -+ if (res) { -+ cmd->error = -EIO; -+ cmd->data->error = -EIO; -+ -+ mmc_request_done(mmc, mrq); -+ return; -+ } -+ -+ -+ if (host->dodma) -+ res = s3cmci_prepare_dma(host, cmd->data); -+ else -+ res = s3cmci_prepare_pio(host, cmd->data); -+ -+ if (res) { -+ cmd->error = -EIO; -+ cmd->data->error = -EIO; -+ -+ mmc_request_done(mmc, mrq); -+ return; -+ } -+ -+ } -+ -+ /* establish the correct prescaler depending on the sd_slow_ratio */ -+ -+ if ((sd_slow_ratio > 1) && -+ host->pdata->use_slow && (host->pdata->use_slow)()) { -+ /* compute the slower speed */ -+ pre = host->prescaler * sd_slow_ratio; -+ if (pre > 255) -+ pre = 255; -+ } else { -+ /* use the normal speed */ -+ pre = host->prescaler; -+ } -+ -+ if (host->sdipre != pre) { -+ dbg(host, dbg_conf, "prescaler changed: %d -> %d\n", -+ (int)host->sdipre, pre); -+ host->sdipre = pre; -+ writel(host->sdipre, host->base + S3C2410_SDIPRE); -+ } -+ -+ __s3cmci_enable_clock(host); -+ s3cmci_send_command(host, cmd); -+ enable_irq(host->irq); -+} -+ -+static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct s3cmci_host *host = mmc_priv(mmc); -+ -+ host->cmd_is_stop = 0; -+ host->mrq = mrq; -+ -+ s3cmci_send_request(mmc); -+} -+ -+static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -+{ -+ struct s3cmci_host *host = mmc_priv(mmc); -+ u32 mci_psc, mci_con; -+ -+ /* Set power */ -+ mci_con = readl(host->base + S3C2410_SDICON); -+ switch (ios->power_mode) { -+ case MMC_POWER_ON: -+ case MMC_POWER_UP: -+ s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK); -+ s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD); -+ s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0); -+ s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); -+ s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); -+ s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); -+ -+ if (host->pdata->set_power) -+ host->pdata->set_power(ios->power_mode, ios->vdd); -+ -+ if (!host->is2440) -+ mci_con |= S3C2410_SDICON_FIFORESET; -+ -+ break; -+ -+ case MMC_POWER_OFF: -+ default: -+ s3c2410_gpio_setpin(S3C2410_GPE5, 0); -+ s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP); -+ -+ if (host->pdata->set_power) -+ host->pdata->set_power(ios->power_mode, ios->vdd); -+ -+ if (host->is2440) -+ mci_con |= S3C2440_SDICON_SDRESET; -+ -+ break; -+ } -+ -+ /* Set clock */ -+ for (mci_psc = 0; mci_psc < 255; mci_psc++) { -+ host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); -+ -+ if (host->real_rate <= ios->clock) -+ break; -+ } -+ -+ if (mci_psc > 255) -+ mci_psc = 255; -+ host->prescaler = mci_psc; -+ host->sdipre = mci_psc; -+ -+ writel(host->prescaler, host->base + S3C2410_SDIPRE); -+ -+ /* If requested clock is 0, real_rate will be 0, too */ -+ if (ios->clock == 0) -+ host->real_rate = 0; -+ -+ /* Set CLOCK_ENABLE */ -+ if (ios->clock) -+ mci_con |= S3C2410_SDICON_CLOCKTYPE; -+ else -+ mci_con &= ~S3C2410_SDICON_CLOCKTYPE; -+ -+ writel(mci_con, host->base + S3C2410_SDICON); -+ -+ if ((ios->power_mode == MMC_POWER_ON) -+ || (ios->power_mode == MMC_POWER_UP)) { -+ -+ dbg(host, dbg_conf, -+ "powered (vdd: %d), clk: %lukHz div=%lu (req: %ukHz)," -+ " bus width: %d\n", ios->vdd, host->real_rate / 1000, -+ host->clk_div * (host->prescaler + 1), -+ ios->clock / 1000, ios->bus_width); -+ -+ /* After power-up, we need to give the card 74 clocks to -+ * initialize, so sleep just a moment before we disable -+ * the clock again. -+ */ -+ if (ios->clock) -+ msleep(1); -+ -+ } else { -+ dbg(host, dbg_conf, "powered down.\n"); -+ } -+ -+ host->bus_width = ios->bus_width; -+ -+ /* No need to run the clock until we have data to move */ -+ if (!sd_idleclk) { -+ __s3cmci_disable_clock(host); -+ dbg(host, dbg_conf, "SD clock disabled when idle.\n"); -+ } -+} -+ -+static void s3cmci_reset(struct s3cmci_host *host) -+{ -+ u32 con = readl(host->base + S3C2410_SDICON); -+ -+ con |= S3C2440_SDICON_SDRESET; -+ -+ writel(con, host->base + S3C2410_SDICON); -+} -+ -+static int s3cmci_get_ro(struct mmc_host *mmc) -+{ -+ struct s3cmci_host *host = mmc_priv(mmc); -+ -+ if (host->pdata->gpio_wprotect == 0) -+ return 0; -+ -+ return s3c2410_gpio_getpin(host->pdata->gpio_wprotect); -+} -+ -+static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable) -+{ -+ struct s3cmci_host *host = mmc_priv(mmc); -+ -+ if (enable) -+ enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ); -+ else -+ disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ); -+} -+ -+static struct mmc_host_ops s3cmci_ops = { -+ .request = s3cmci_request, -+ .set_ios = s3cmci_set_ios, -+ .get_ro = s3cmci_get_ro, -+ .enable_sdio_irq = s3cmci_enable_sdio_irq, -+}; -+ -+static struct s3c24xx_mci_pdata s3cmci_def_pdata = { -+ .do_dma = 0, -+ .gpio_detect = 0, -+ .set_power = NULL, -+ .ocr_avail = MMC_VDD_32_33, -+}; -+ -+static int s3cmci_probe(struct platform_device *pdev, int is2440) -+{ -+ struct mmc_host *mmc; -+ struct s3cmci_host *host; -+ -+ int ret; -+ -+ mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); -+ if (!mmc) { -+ ret = -ENOMEM; -+ goto probe_out; -+ } -+ -+ host = mmc_priv(mmc); -+ host->mmc = mmc; -+ host->pdev = pdev; -+ -+ host->pdata = pdev->dev.platform_data; -+ if (!host->pdata) { -+ pdev->dev.platform_data = &s3cmci_def_pdata; -+ host->pdata = &s3cmci_def_pdata; -+ } -+ -+ spin_lock_init(&host->complete_lock); -+ tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); -+ if (is2440) { -+ host->is2440 = 1; -+ host->sdiimsk = S3C2440_SDIIMSK; -+ host->sdidata = S3C2440_SDIDATA; -+ host->sdidata_b = S3C2440_SDIDATA_BYTE; -+ host->clk_div = 1; -+ } else { -+ host->is2440 = 0; -+ host->sdiimsk = S3C2410_SDIIMSK; -+ host->sdidata = S3C2410_SDIDATA; -+ host->sdidata_b = S3C2410_SDIDATA_BYTE; -+ host->clk_div = 2; -+ } -+ host->dodma = host->pdata->do_dma; -+ host->complete_what = COMPLETION_NONE; -+ host->pio_active = XFER_NONE; -+ -+ host->dma = DMACH_SDI; -+ host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); -+ s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); -+ -+ host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!host->mem) { -+ dev_err(&pdev->dev, -+ "failed to get io memory region resouce.\n"); -+ -+ ret = -ENOENT; -+ goto probe_free_host; -+ } -+ -+ host->mem = request_mem_region(host->mem->start, -+ RESSIZE(host->mem), pdev->name); -+ -+ if (!host->mem) { -+ dev_err(&pdev->dev, "failed to request io memory region.\n"); -+ ret = -ENOENT; -+ goto probe_free_host; -+ } -+ -+ host->base = ioremap(host->mem->start, RESSIZE(host->mem)); -+ if (host->base == 0) { -+ dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); -+ ret = -EINVAL; -+ goto probe_free_mem_region; -+ } -+ -+ host->irq = platform_get_irq(pdev, 0); -+ if (host->irq == 0) { -+ dev_err(&pdev->dev, "failed to get interrupt resouce.\n"); -+ ret = -EINVAL; -+ goto probe_iounmap; -+ } -+ -+ if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) { -+ dev_err(&pdev->dev, "failed to request mci interrupt.\n"); -+ ret = -ENOENT; -+ goto probe_iounmap; -+ } -+ -+ disable_irq(host->irq); -+ -+ s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); -+ set_irq_type(host->irq_cd, IRQT_BOTHEDGE); -+ -+ if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) { -+ dev_err(&pdev->dev, -+ "failed to request card detect interrupt.\n"); -+ -+ ret = -ENOENT; -+ goto probe_free_irq; -+ } -+ -+ if (host->pdata->gpio_wprotect) -+ s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect, -+ S3C2410_GPIO_INPUT); -+ -+ if (s3c2410_dma_request(host->dma, &s3cmci_dma_client, NULL)) { -+ dev_err(&pdev->dev, "unable to get DMA channel.\n"); -+ ret = -EBUSY; -+ goto probe_free_irq_cd; -+ } -+ -+ host->clk = clk_get(&pdev->dev, "sdi"); -+ if (IS_ERR(host->clk)) { -+ dev_err(&pdev->dev, "failed to find clock source.\n"); -+ ret = PTR_ERR(host->clk); -+ host->clk = NULL; -+ goto probe_free_host; -+ } -+ -+ ret = clk_enable(host->clk); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to enable clock source.\n"); -+ goto clk_free; -+ } -+ -+ host->clk_rate = clk_get_rate(host->clk); -+ -+ mmc->ops = &s3cmci_ops; -+ mmc->ocr_avail = host->pdata->ocr_avail; -+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; -+ mmc->f_min = host->clk_rate / (host->clk_div * 256); -+ mmc->f_max = sd_max_clk; -+ -+ mmc->max_blk_count = 4095; -+ mmc->max_blk_size = 4095; -+ mmc->max_req_size = 4095 * 512; -+ mmc->max_seg_size = mmc->max_req_size; -+ -+ mmc->max_phys_segs = 128; -+ mmc->max_hw_segs = 128; -+ -+ dbg(host, dbg_debug, "probe: mode:%s mapped mci_base:%p irq:%u " -+ "irq_cd:%u dma:%u.\n", (host->is2440?"2440":""), -+ host->base, host->irq, host->irq_cd, host->dma); -+ -+ ret = mmc_add_host(mmc); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to add mmc host.\n"); -+ goto free_dmabuf; -+ } -+ -+ platform_set_drvdata(pdev, mmc); -+ -+ dev_info(&pdev->dev, "initialisation done.\n"); -+ return 0; -+ -+ free_dmabuf: -+ clk_disable(host->clk); -+ -+ clk_free: -+ clk_put(host->clk); -+ -+ probe_free_irq_cd: -+ free_irq(host->irq_cd, host); -+ -+ probe_free_irq: -+ free_irq(host->irq, host); -+ -+ probe_iounmap: -+ iounmap(host->base); -+ -+ probe_free_mem_region: -+ release_mem_region(host->mem->start, RESSIZE(host->mem)); -+ -+ probe_free_host: -+ mmc_free_host(mmc); -+ probe_out: -+ return ret; -+} -+ -+static int s3cmci_remove(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(pdev); -+ struct s3cmci_host *host = mmc_priv(mmc); -+ -+ mmc_remove_host(mmc); -+ clk_disable(host->clk); -+ clk_put(host->clk); -+ s3c2410_dma_free(host->dma, &s3cmci_dma_client); -+ free_irq(host->irq_cd, host); -+ free_irq(host->irq, host); -+ iounmap(host->base); -+ release_mem_region(host->mem->start, RESSIZE(host->mem)); -+ mmc_free_host(mmc); -+ -+ return 0; -+} -+ -+static int s3cmci_probe_2410(struct platform_device *dev) -+{ -+ return s3cmci_probe(dev, 0); -+} -+ -+static int s3cmci_probe_2412(struct platform_device *dev) -+{ -+ return s3cmci_probe(dev, 1); -+} -+ -+static int s3cmci_probe_2440(struct platform_device *dev) -+{ -+ return s3cmci_probe(dev, 1); -+} -+ -+#ifdef CONFIG_PM -+ -+static int s3cmci_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(dev); -+ struct s3cmci_host *host = mmc_priv(mmc); -+ int ret; -+ -+ /* Ensure clock is running so it will be running on resume */ -+ __s3cmci_enable_clock(host); -+ -+ /* We will do more commands, make sure the clock stays running, -+ * and save our state so that we can restore it on resume. -+ */ -+ suspend_sd_idleclk = sd_idleclk; -+ sd_idleclk = 1; -+ -+ ret = mmc_suspend_host(mmc, state); -+ -+ /* so that when we resume, we use any modified max rate */ -+ mmc->f_max = sd_max_clk; -+ -+ return ret; -+} -+ -+static int s3cmci_resume(struct platform_device *dev) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(dev); -+ -+ /* Put the sd_idleclk state back to what it was */ -+ sd_idleclk = suspend_sd_idleclk; -+ -+ return mmc_resume_host(mmc); -+} -+ -+#else /* CONFIG_PM */ -+#define s3cmci_suspend NULL -+#define s3cmci_resume NULL -+#endif /* CONFIG_PM */ -+ -+ -+static struct platform_driver s3cmci_driver_2410 = { -+ .driver.name = "s3c2410-sdi", -+ .probe = s3cmci_probe_2410, -+ .remove = s3cmci_remove, -+ .suspend = s3cmci_suspend, -+ .resume = s3cmci_resume, -+}; -+ -+static struct platform_driver s3cmci_driver_2412 = { -+ .driver.name = "s3c2412-sdi", -+ .probe = s3cmci_probe_2412, -+ .remove = s3cmci_remove, -+ .suspend = s3cmci_suspend, -+ .resume = s3cmci_resume, -+}; -+ -+static struct platform_driver s3cmci_driver_2440 = { -+ .driver.name = "s3c2440-sdi", -+ .probe = s3cmci_probe_2440, -+ .remove = s3cmci_remove, -+ .suspend = s3cmci_suspend, -+ .resume = s3cmci_resume, -+}; -+ -+ -+static int __init s3cmci_init(void) -+{ -+ spin_lock_init(&clock_lock); -+ platform_driver_register(&s3cmci_driver_2410); -+ platform_driver_register(&s3cmci_driver_2412); -+ platform_driver_register(&s3cmci_driver_2440); -+ return 0; -+} -+ -+static void __exit s3cmci_exit(void) -+{ -+ platform_driver_unregister(&s3cmci_driver_2410); -+ platform_driver_unregister(&s3cmci_driver_2412); -+ platform_driver_unregister(&s3cmci_driver_2440); -+} -+ -+module_init(s3cmci_init); -+module_exit(s3cmci_exit); -+ -+MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Thomas Kleffel "); -Index: linux-2.6.24.7/drivers/mmc/host/s3cmci.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/mmc/host/s3cmci.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,70 @@ -+/* -+ * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver -+ * -+ * Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+enum s3cmci_waitfor { -+ COMPLETION_NONE, -+ COMPLETION_FINALIZE, -+ COMPLETION_CMDSENT, -+ COMPLETION_RSPFIN, -+ COMPLETION_XFERFINISH, -+ COMPLETION_XFERFINISH_RSPFIN, -+}; -+ -+struct s3cmci_host { -+ struct platform_device *pdev; -+ struct s3c24xx_mci_pdata *pdata; -+ struct mmc_host *mmc; -+ struct resource *mem; -+ struct clk *clk; -+ void __iomem *base; -+ int irq; -+ int irq_cd; -+ int dma; -+ -+ unsigned long clk_rate; -+ unsigned long clk_div; -+ unsigned long real_rate; -+ u8 prescaler; -+ u8 sdipre; -+ -+ int is2440; -+ unsigned sdiimsk; -+ unsigned sdidata; -+ unsigned sdidata_b; -+ int dodma; -+ -+ int dmatogo; -+ -+ struct mmc_request *mrq; -+ int cmd_is_stop; -+ -+ spinlock_t complete_lock; -+ enum s3cmci_waitfor complete_what; -+ -+ int dma_complete; -+ -+ u32 pio_sgptr; -+ u32 pio_bytes; -+ u32 pio_count; -+ u8 *pio_ptr; -+#define XFER_NONE 0 -+#define XFER_READ 1 -+#define XFER_WRITE 2 -+ u32 pio_active; -+ -+ int bus_width; -+ -+ char dbgmsg_cmd[301]; -+ char dbgmsg_dat[301]; -+ char *status; -+ -+ unsigned int ccnt, dcnt; -+ struct tasklet_struct pio_tasklet; -+}; -Index: linux-2.6.24.7/drivers/mtd/nand/nand_bbt.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/nand/nand_bbt.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/mtd/nand/nand_bbt.c 2008-12-11 22:46:49.000000000 +0100 -@@ -430,8 +430,10 @@ static int create_bbt(struct mtd_info *m - - if (ret) { - this->bbt[i >> 3] |= 0x03 << (i & 0x6); -+#if 0 - printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n", - i >> 1, (unsigned int)from); -+#endif - mtd->ecc_stats.badblocks++; - } - -Index: linux-2.6.24.7/drivers/mtd/nand/s3c2410.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/nand/s3c2410.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/mtd/nand/s3c2410.c 2008-12-11 22:46:49.000000000 +0100 -@@ -158,6 +158,10 @@ static int s3c_nand_calc_rate(int wanted - { - int result; - -+ /* Tacls can be 0ns in some cases */ -+ if (wanted == 0) -+ return 0; -+ - result = (wanted * clk) / NS_IN_KHZ; - result++; - -@@ -168,9 +172,6 @@ static int s3c_nand_calc_rate(int wanted - return -1; - } - -- if (result < 1) -- result = 1; -- - return result; - } - -@@ -202,7 +203,7 @@ static int s3c2410_nand_inithw(struct s3 - twrph1 = 8; - } - -- if (tacls < 0 || twrph0 < 0 || twrph1 < 0) { -+ if (tacls < 0 || twrph0 < 1 || twrph1 < 1) { - dev_err(info->device, "cannot get suitable timings\n"); - return -EINVAL; - } -@@ -213,14 +214,14 @@ static int s3c2410_nand_inithw(struct s3 - switch (info->cpu_type) { - case TYPE_S3C2410: - cfg = S3C2410_NFCONF_EN; -- cfg |= S3C2410_NFCONF_TACLS(tacls - 1); -+ cfg |= S3C2410_NFCONF_TACLS(tacls); - cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); - cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); - break; - - case TYPE_S3C2440: - case TYPE_S3C2412: -- cfg = S3C2440_NFCONF_TACLS(tacls - 1); -+ cfg = S3C2440_NFCONF_TACLS(tacls); - cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1); - cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1); - -@@ -364,23 +365,21 @@ static int s3c2410_nand_correct_data(str - ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) { - /* calculate the bit position of the error */ - -- bit = (diff2 >> 2) & 1; -- bit |= (diff2 >> 3) & 2; -- bit |= (diff2 >> 4) & 4; -+ bit = ((diff2 >> 3) & 1) | -+ ((diff2 >> 4) & 2) | -+ ((diff2 >> 5) & 4); - - /* calculate the byte position of the error */ - -- byte = (diff1 << 1) & 0x80; -- byte |= (diff1 << 2) & 0x40; -- byte |= (diff1 << 3) & 0x20; -- byte |= (diff1 << 4) & 0x10; -- -- byte |= (diff0 >> 3) & 0x08; -- byte |= (diff0 >> 2) & 0x04; -- byte |= (diff0 >> 1) & 0x02; -- byte |= (diff0 >> 0) & 0x01; -- -- byte |= (diff2 << 8) & 0x100; -+ byte = ((diff2 << 7) & 0x100) | -+ ((diff1 << 0) & 0x80) | -+ ((diff1 << 1) & 0x40) | -+ ((diff1 << 2) & 0x20) | -+ ((diff1 << 3) & 0x10) | -+ ((diff0 >> 4) & 0x08) | -+ ((diff0 >> 3) & 0x04) | -+ ((diff0 >> 2) & 0x02) | -+ ((diff0 >> 1) & 0x01); - - dev_dbg(info->device, "correcting error bit %d, byte %d\n", - bit, byte); -@@ -399,7 +398,7 @@ static int s3c2410_nand_correct_data(str - if ((diff0 & ~(1<> 8; - ecc_code[2] = ecc >> 16; - -- pr_debug("%s: returning ecc %06lx\n", __func__, ecc); -+ pr_debug("%s: returning ecc %06lx\n", __func__, ecc & 0xffffff); - - return 0; - } -@@ -559,17 +558,31 @@ static int s3c2410_nand_remove(struct pl - } - - #ifdef CONFIG_MTD_PARTITIONS -+const char *part_probes[] = { "cmdlinepart", NULL }; - static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, - struct s3c2410_nand_mtd *mtd, - struct s3c2410_nand_set *set) - { -+ struct mtd_partition *part_info; -+ int nr_part = 0; -+ - if (set == NULL) - return add_mtd_device(&mtd->mtd); - -- if (set->nr_partitions > 0 && set->partitions != NULL) { -- return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions); -+ if (set->nr_partitions == 0) { -+ mtd->mtd.name = set->name; -+ nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, -+ &part_info, 0); -+ } else { -+ if (set->nr_partitions > 0 && set->partitions != NULL) { -+ nr_part = set->nr_partitions; -+ part_info = set->partitions; -+ } - } - -+ if (nr_part > 0 && part_info) -+ return add_mtd_partitions(&mtd->mtd, part_info, nr_part); -+ - return add_mtd_device(&mtd->mtd); - } - #else -@@ -598,9 +611,13 @@ static void s3c2410_nand_init_chip(struc - chip->select_chip = s3c2410_nand_select_chip; - chip->chip_delay = 50; - chip->priv = nmtd; -- chip->options = 0; - chip->controller = &info->controller; - -+ if (set->flags & S3C2410_NAND_BBT) -+ chip->options = NAND_USE_FLASH_BBT; -+ else -+ chip->options = 0; -+ - switch (info->cpu_type) { - case TYPE_S3C2410: - chip->IO_ADDR_W = regs + S3C2410_NFDATA; -@@ -640,13 +657,10 @@ static void s3c2410_nand_init_chip(struc - nmtd->mtd.owner = THIS_MODULE; - nmtd->set = set; - -- if (hardware_ecc) { -+ if (!info->platform->software_ecc && hardware_ecc) { - chip->ecc.calculate = s3c2410_nand_calculate_ecc; - chip->ecc.correct = s3c2410_nand_correct_data; - chip->ecc.mode = NAND_ECC_HW; -- chip->ecc.size = 512; -- chip->ecc.bytes = 3; -- chip->ecc.layout = &nand_hw_eccoob; - - switch (info->cpu_type) { - case TYPE_S3C2410: -@@ -670,6 +684,34 @@ static void s3c2410_nand_init_chip(struc - } - } - -+/* s3c2410_nand_update_chip -+ * -+ * post-probe chip update, to change any items, such as the -+ * layout for large page nand -+ */ -+ -+static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, -+ struct s3c2410_nand_mtd *nmtd) -+{ -+ struct nand_chip *chip = &nmtd->chip; -+ -+ printk("%s: chip %p: %d\n", __func__, chip, chip->page_shift); -+ -+ if (hardware_ecc) { -+ /* change the behaviour depending on wether we are using -+ * the large or small page nand device */ -+ -+ if (chip->page_shift > 10) { -+ chip->ecc.size = 256; -+ chip->ecc.bytes = 3; -+ } else { -+ chip->ecc.size = 512; -+ chip->ecc.bytes = 3; -+ chip->ecc.layout = &nand_hw_eccoob; -+ } -+ } -+} -+ - /* s3c2410_nand_probe - * - * called by device layer when it finds a device matching -@@ -776,9 +818,12 @@ static int s3c24xx_nand_probe(struct pla - - s3c2410_nand_init_chip(info, nmtd, sets); - -- nmtd->scan_res = nand_scan(&nmtd->mtd, (sets) ? sets->nr_chips : 1); -+ nmtd->scan_res = nand_scan_ident(&nmtd->mtd, -+ (sets) ? sets->nr_chips : 1); - - if (nmtd->scan_res == 0) { -+ s3c2410_nand_update_chip(info, nmtd); -+ nand_scan_tail(&nmtd->mtd); - s3c2410_nand_add_partition(info, nmtd, sets); - } - -Index: linux-2.6.24.7/drivers/net/cs89x0.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/net/cs89x0.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/net/cs89x0.c 2008-12-11 22:46:49.000000000 +0100 -@@ -194,6 +194,10 @@ static unsigned int cs8900_irq_map[] = { - #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ - static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; - static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; -+#elif defined(CONFIG_MACH_QT2410) -+#include -+static unsigned int netcard_portlist [] __initdata = { 0xe0000300, 0 }; -+static unsigned int cs8900_irq_map[] = { IRQ_EINT9, 0, 0, 0 }; - #else - static unsigned int netcard_portlist[] __initdata = - { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; -@@ -829,6 +833,14 @@ cs89x0_probe1(struct net_device *dev, in - - printk(" IRQ %d", dev->irq); - -+ dev->dev_addr[0] = 0x00; -+ dev->dev_addr[1] = 0x00; -+ dev->dev_addr[2] = 0xc0; -+ dev->dev_addr[3] = 0xff; -+ dev->dev_addr[4] = 0xee; -+ dev->dev_addr[5] = 0x08; -+ set_mac_address(dev, dev->dev_addr); -+ - #if ALLOW_DMA - if (lp->use_dma) { - get_dma_channel(dev); -@@ -1304,7 +1316,7 @@ net_open(struct net_device *dev) - else - #endif - { --#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X) -+#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X) && !defined(CONFIG_MACH_QT2410) - if (((1 << dev->irq) & lp->irq_map) == 0) { - printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", - dev->name, dev->irq, lp->irq_map); -Index: linux-2.6.24.7/drivers/net/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/net/Kconfig 2008-12-11 22:46:09.000000000 +0100 -+++ linux-2.6.24.7/drivers/net/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -1332,7 +1332,7 @@ source "drivers/net/ibm_newemac/Kconfig" - - config NET_PCI - bool "EISA, VLB, PCI and on board controllers" -- depends on ISA || EISA || PCI -+ depends on ISA || EISA || PCI || MACH_QT2410 - help - This is another class of network cards which attach directly to the - bus. If you have one of those, say Y and read the Ethernet-HOWTO, -@@ -1508,7 +1508,7 @@ config FORCEDETH_NAPI - - config CS89x0 - tristate "CS89x0 support" -- depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X) -+ depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_QT2410) - ---help--- - Support for CS89x0 chipset based Ethernet cards. If you have a - network (Ethernet) card of this type, say Y and read the -Index: linux-2.6.24.7/drivers/pnp/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/pnp/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/pnp/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -5,7 +5,7 @@ - menuconfig PNP - bool "Plug and Play support" - depends on HAS_IOMEM -- depends on ISA || ACPI -+ depends on ISA || ACPI || SDIO - ---help--- - Plug and Play (PnP) is a standard for peripherals which allows those - peripherals to be configured by software, e.g. assign IRQ's or other -Index: linux-2.6.24.7/drivers/pnp/resource.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/pnp/resource.c 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/pnp/resource.c 2008-12-11 22:46:49.000000000 +0100 -@@ -431,6 +431,7 @@ int pnp_check_dma(struct pnp_dev *dev, i - } - } - -+#if 0 - /* check if the resource is already in use, skip if the - * device is active because it itself may be in use */ - if (!dev->active) { -@@ -438,6 +439,7 @@ int pnp_check_dma(struct pnp_dev *dev, i - return 0; - free_dma(*dma); - } -+#endif - - /* check for conflicts with other pnp devices */ - pnp_for_each_dev(tdev) { -Index: linux-2.6.24.7/drivers/power/bq27000_battery.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/power/bq27000_battery.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,424 @@ -+/* -+ * Driver for batteries with bq27000 chips inside via HDQ -+ * -+ * Copyright 2008 Openmoko, Inc -+ * Andy Green -+ * -+ * based on ds2760 driver, original copyright notice for that ---> -+ * -+ * Copyright © 2007 Anton Vorontsov -+ * 2004-2007 Matt Reimer -+ * 2004 Szabolcs Gyurko -+ * -+ * Use consistent with the GNU GPL is permitted, -+ * provided that this copyright notice is -+ * preserved in its entirety in all copies and derived works. -+ * -+ * Author: Anton Vorontsov -+ * February 2007 -+ * -+ * Matt Reimer -+ * April 2004, 2005, 2007 -+ * -+ * Szabolcs Gyurko -+ * September 2004 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+enum bq27000_regs { -+ /* RAM regs */ -+ /* read-write after this */ -+ BQ27000_CTRL = 0, /* Device Control Register */ -+ BQ27000_MODE, /* Device Mode Register */ -+ BQ27000_AR_L, /* At-Rate H L */ -+ BQ27000_AR_H, -+ /* read-only after this */ -+ BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */ -+ BQ27000_ARTTE_H, -+ BQ27000_TEMP_L, /* Reported Temperature H L */ -+ BQ27000_TEMP_H, -+ BQ27000_VOLT_L, /* Reported Voltage H L */ -+ BQ27000_VOLT_H, -+ BQ27000_FLAGS, /* Status Flags */ -+ BQ27000_RSOC, /* Relative State of Charge */ -+ BQ27000_NAC_L, /* Nominal Available Capacity H L */ -+ BQ27000_NAC_H, -+ BQ27000_CACD_L, /* Discharge Compensated H L */ -+ BQ27000_CACD_H, -+ BQ27000_CACT_L, /* Temperature Compensated H L */ -+ BQ27000_CACT_H, -+ BQ27000_LMD_L, /* Last measured discharge H L */ -+ BQ27000_LMD_H, -+ BQ27000_AI_L, /* Average Current H L */ -+ BQ27000_AI_H, -+ BQ27000_TTE_L, /* Time to Empty H L */ -+ BQ27000_TTE_H, -+ BQ27000_TTF_L, /* Time to Full H L */ -+ BQ27000_TTF_H, -+ BQ27000_SI_L, /* Standby Current H L */ -+ BQ27000_SI_H, -+ BQ27000_STTE_L, /* Standby Time To Empty H L */ -+ BQ27000_STTE_H, -+ BQ27000_MLI_L, /* Max Load Current H L */ -+ BQ27000_MLI_H, -+ BQ27000_MLTTE_L, /* Max Load Time To Empty H L */ -+ BQ27000_MLTTE_H, -+ BQ27000_SAE_L, /* Available Energy H L */ -+ BQ27000_SAE_H, -+ BQ27000_AP_L, /* Available Power H L */ -+ BQ27000_AP_H, -+ BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */ -+ BQ27000_TTECP_H, -+ BQ27000_CYCL_L, /* Cycle count since learning cycle H L */ -+ BQ27000_CYCL_H, -+ BQ27000_CYCT_L, /* Cycle Count Total H L */ -+ BQ27000_CYCT_H, -+ BQ27000_CSOC, /* Compensated State Of Charge */ -+ /* EEPROM regs */ -+ /* read-write after this */ -+ BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */ -+ BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */ -+ BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */ -+ BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */ -+ BQ27000_EE_ISLC, /* Initial Standby Load Current */ -+ BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */ -+ BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */ -+ BQ27000_EE_PKCFG, /* Pack Configuration Values */ -+ BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */ -+ BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */ -+ BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */ -+}; -+ -+enum bq27000_status_flags { -+ BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */ -+ BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */ -+ BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */ -+ BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely innacurate */ -+ BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */ -+ BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */ -+ BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */ -+ BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */ -+}; -+ -+#define NANOVOLTS_UNIT 3750 -+ -+struct bq27000_device_info { -+ struct device *dev; -+ struct power_supply bat; -+ struct bq27000_platform_data *pdata; -+}; -+ -+/* -+ * reading 16 bit values over HDQ has a special hazard where the -+ * hdq device firmware can update the 16-bit register during the time we -+ * read the two halves. TI document SLUS556D recommends the algorithm here -+ * to avoid trouble -+ */ -+ -+static int hdq_read16(struct bq27000_device_info *di, int address) -+{ -+ int acc; -+ int high; -+ int retries = 3; -+ -+ while (retries--) { -+ -+ high = (di->pdata->hdq_read)(address + 1); /* high part */ -+ -+ if (high < 0) -+ return high; -+ acc = (di->pdata->hdq_read)(address); -+ if (acc < 0) -+ return acc; -+ -+ /* confirm high didn't change between reading it and low */ -+ if (high == (di->pdata->hdq_read)(address + 1)) -+ return (high << 8) | acc; -+ } -+ -+ return -ETIME; -+} -+ -+#define to_bq27000_device_info(x) container_of((x), \ -+ struct bq27000_device_info, \ -+ bat); -+ -+static void bq27000_battery_external_power_changed(struct power_supply *psy) -+{ -+ struct bq27000_device_info *di = to_bq27000_device_info(psy); -+ -+ dev_dbg(di->dev, "%s\n", __FUNCTION__); -+} -+ -+static int bq27000_battery_get_property(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ int v, n; -+ struct bq27000_device_info *di = to_bq27000_device_info(psy); -+ -+ if (!(di->pdata->hdq_initialized)()) -+ return -EINVAL; -+ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_STATUS: -+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN; -+ -+ if (!di->pdata->get_charger_online_status) -+ goto use_bat; -+ if ((di->pdata->get_charger_online_status)()) { -+ /* -+ * charger is definitively present -+ * we report our state in terms of what it says it -+ * is doing -+ */ -+ if (!di->pdata->get_charger_active_status) -+ goto use_bat; -+ -+ if ((di->pdata->get_charger_active_status)()) { -+ val->intval = POWER_SUPPLY_STATUS_CHARGING; -+ break; -+ } -+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; -+ break; -+ } -+ -+ /* -+ * platform provided definite indication of charger presence, -+ * and it is telling us it isn't there... but we are on so we -+ * must be running from battery ---> -+ */ -+ -+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING; -+ break; -+ -+use_bat: -+ /* -+ * either the charger is not connected, or the -+ * platform doesn't give info about charger, use battery state -+ * but... battery state can be out of date by 4 seconds or -+ * so... use the platform callbacks if possible. -+ */ -+ v = hdq_read16(di, BQ27000_AI_L); -+ if (v < 0) -+ return v; -+ -+ /* no real activity on the battery */ -+ if (v < 2) { -+ if (!hdq_read16(di, BQ27000_TTF_L)) -+ val->intval = POWER_SUPPLY_STATUS_FULL; -+ else -+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; -+ break; -+ } -+ /* power is actually going in or out... */ -+ v = (di->pdata->hdq_read)(BQ27000_FLAGS); -+ if (v < 0) -+ return v; -+ if (v & BQ27000_STATUS_CHGS) -+ val->intval = POWER_SUPPLY_STATUS_CHARGING; -+ else -+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING; -+ break; -+ case POWER_SUPPLY_PROP_VOLTAGE_NOW: -+ v = hdq_read16(di, BQ27000_VOLT_L); -+ if (v < 0) -+ return v; -+ /* mV -> uV */ -+ val->intval = v * 1000; -+ break; -+ case POWER_SUPPLY_PROP_CURRENT_NOW: -+ v = (di->pdata->hdq_read)(BQ27000_FLAGS); -+ if (v < 0) -+ return v; -+ if (v & BQ27000_STATUS_CHGS) -+ n = -NANOVOLTS_UNIT; -+ else -+ n = NANOVOLTS_UNIT; -+ v = hdq_read16(di, BQ27000_AI_L); -+ if (v < 0) -+ return v; -+ val->intval = (v * n) / di->pdata->rsense_mohms; -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_FULL: -+ v = hdq_read16(di, BQ27000_LMD_L); -+ if (v < 0) -+ return v; -+ val->intval = (v * 3570) / di->pdata->rsense_mohms; -+ break; -+ case POWER_SUPPLY_PROP_TEMP: -+ v = hdq_read16(di, BQ27000_TEMP_L); -+ if (v < 0) -+ return v; -+ /* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/ -+ /* 10926 = 27315 * 4 / 10 */ -+ val->intval = (((long)v * 10l) - 10926) / 4; -+ break; -+ case POWER_SUPPLY_PROP_TECHNOLOGY: -+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION; -+ break; -+ case POWER_SUPPLY_PROP_CAPACITY: -+ val->intval = (di->pdata->hdq_read)(BQ27000_RSOC); -+ if (val->intval < 0) -+ return val->intval; -+ break; -+ case POWER_SUPPLY_PROP_PRESENT: -+ v = (di->pdata->hdq_read)(BQ27000_RSOC); -+ val->intval = !(v < 0); -+ break; -+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: -+ v = hdq_read16(di, BQ27000_TTE_L); -+ if (v < 0) -+ return v; -+ val->intval = 60 * v; -+ break; -+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW: -+ v = hdq_read16(di, BQ27000_TTF_L); -+ if (v < 0) -+ return v; -+ val->intval = 60 * v; -+ break; -+ case POWER_SUPPLY_PROP_ONLINE: -+ if (di->pdata->get_charger_online_status) -+ val->intval = (di->pdata->get_charger_online_status)(); -+ else -+ return -EINVAL; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static enum power_supply_property bq27000_battery_props[] = { -+ POWER_SUPPLY_PROP_STATUS, -+ POWER_SUPPLY_PROP_VOLTAGE_NOW, -+ POWER_SUPPLY_PROP_CURRENT_NOW, -+ POWER_SUPPLY_PROP_CHARGE_FULL, -+ POWER_SUPPLY_PROP_TEMP, -+ POWER_SUPPLY_PROP_TECHNOLOGY, -+ POWER_SUPPLY_PROP_PRESENT, -+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, -+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, -+ POWER_SUPPLY_PROP_CAPACITY, -+ POWER_SUPPLY_PROP_ONLINE -+}; -+ -+static int bq27000_battery_probe(struct platform_device *pdev) -+{ -+ int retval = 0; -+ struct bq27000_device_info *di; -+ struct bq27000_platform_data *pdata; -+ -+ dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n"); -+ -+ di = kzalloc(sizeof(*di), GFP_KERNEL); -+ if (!di) { -+ retval = -ENOMEM; -+ goto di_alloc_failed; -+ } -+ -+ platform_set_drvdata(pdev, di); -+ -+ pdata = pdev->dev.platform_data; -+ di->dev = &pdev->dev; -+ /* di->w1_dev = pdev->dev.parent; */ -+ di->bat.name = pdata->name; -+ di->bat.type = POWER_SUPPLY_TYPE_BATTERY; -+ di->bat.properties = bq27000_battery_props; -+ di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props); -+ di->bat.get_property = bq27000_battery_get_property; -+ di->bat.external_power_changed = -+ bq27000_battery_external_power_changed; -+ di->bat.use_for_apm = 1; -+ di->pdata = pdata; -+ -+ retval = power_supply_register(&pdev->dev, &di->bat); -+ if (retval) { -+ dev_err(di->dev, "failed to register battery\n"); -+ goto batt_failed; -+ } -+ -+ return 0; -+ -+batt_failed: -+ kfree(di); -+di_alloc_failed: -+ return retval; -+} -+ -+static int bq27000_battery_remove(struct platform_device *pdev) -+{ -+ struct bq27000_device_info *di = platform_get_drvdata(pdev); -+ -+ power_supply_unregister(&di->bat); -+ -+ return 0; -+} -+ -+void bq27000_charging_state_change(struct platform_device *pdev) -+{ -+ struct bq27000_device_info *di = platform_get_drvdata(pdev); -+ -+ if (!di) -+ return; -+ -+ power_supply_changed(&di->bat); -+} -+EXPORT_SYMBOL_GPL(bq27000_charging_state_change); -+ -+#ifdef CONFIG_PM -+ -+static int bq27000_battery_suspend(struct platform_device *pdev, -+ pm_message_t state) -+{ -+ return 0; -+} -+ -+static int bq27000_battery_resume(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+#else -+ -+#define bq27000_battery_suspend NULL -+#define bq27000_battery_resume NULL -+ -+#endif /* CONFIG_PM */ -+ -+static struct platform_driver bq27000_battery_driver = { -+ .driver = { -+ .name = "bq27000-battery", -+ }, -+ .probe = bq27000_battery_probe, -+ .remove = bq27000_battery_remove, -+ .suspend = bq27000_battery_suspend, -+ .resume = bq27000_battery_resume, -+}; -+ -+static int __init bq27000_battery_init(void) -+{ -+ return platform_driver_register(&bq27000_battery_driver); -+} -+ -+static void __exit bq27000_battery_exit(void) -+{ -+ platform_driver_unregister(&bq27000_battery_driver); -+} -+ -+module_init(bq27000_battery_init); -+module_exit(bq27000_battery_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Andy Green "); -+MODULE_DESCRIPTION("bq27000 battery driver"); -Index: linux-2.6.24.7/drivers/power/gta01_battery.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/power/gta01_battery.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,97 @@ -+/* -+ * Battery driver for the Openmoko GTA01 device, using the pcf50606 chip. -+ * -+ * This is nothing more than a write-thru interface to the real logic, -+ * which is part of the pcf50606.c multifunction chip driver. -+ * Copyright © 2008 Mike Westerhof -+ * -+ * -+ * Portions liberally borrowed from olpc_battery.c, copyright below: -+ * Copyright © 2006 David Woodhouse -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/********************************************************************* -+ * This global is set by the pcf50606 driver to the correct callback -+ *********************************************************************/ -+ -+extern int (*pmu_bat_get_property)(struct power_supply *, -+ enum power_supply_property, -+ union power_supply_propval *); -+ -+ -+/********************************************************************* -+ * Battery properties -+ *********************************************************************/ -+static int gta01_bat_get_property(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ if (pmu_bat_get_property) -+ return (pmu_bat_get_property)(psy, psp, val); -+ else -+ return -ENODEV; -+} -+ -+static enum power_supply_property gta01_bat_props[] = { -+ POWER_SUPPLY_PROP_STATUS, -+ POWER_SUPPLY_PROP_PRESENT, -+ POWER_SUPPLY_PROP_ONLINE, -+ POWER_SUPPLY_PROP_VOLTAGE_NOW, -+ POWER_SUPPLY_PROP_CURRENT_NOW, -+ POWER_SUPPLY_PROP_TEMP, -+ POWER_SUPPLY_PROP_CAPACITY, -+}; -+ -+/********************************************************************* -+ * Initialisation -+ *********************************************************************/ -+ -+static struct platform_device *bat_pdev; -+ -+static struct power_supply gta01_bat = { -+ .properties = gta01_bat_props, -+ .num_properties = ARRAY_SIZE(gta01_bat_props), -+ .get_property = gta01_bat_get_property, -+ .use_for_apm = 0, /* pcf50606 driver has its own apm driver */ -+}; -+ -+static int __init gta01_bat_init(void) -+{ -+ int ret; -+ -+ bat_pdev = platform_device_register_simple("bat", 0, NULL, 0); -+ if (IS_ERR(bat_pdev)) -+ return PTR_ERR(bat_pdev); -+ -+ gta01_bat.name = bat_pdev->name; -+ -+ ret = power_supply_register(&bat_pdev->dev, >a01_bat); -+ if (ret) -+ platform_device_unregister(bat_pdev); -+ -+ return ret; -+} -+ -+static void __exit gta01_bat_exit(void) -+{ -+ power_supply_unregister(>a01_bat); -+ platform_device_unregister(bat_pdev); -+} -+ -+module_init(gta01_bat_init); -+module_exit(gta01_bat_exit); -+ -+MODULE_AUTHOR("Mike Westerhof "); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Battery driver for GTA01"); -Index: linux-2.6.24.7/drivers/power/gta02_hdq.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/power/gta02_hdq.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,250 @@ -+/* -+ * HDQ driver for the FIC Neo1973 GTA02 GSM phone -+ * -+ * (C) 2006-2007 by Openmoko, Inc. -+ * Author: Andy Green -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+ -+#define HDQ_READ 0 -+#define HDQ_WRITE 0x80 -+ -+ -+int gta02hdq_initialized(void) -+{ -+ return fiq_ipc.hdq_probed; -+} -+EXPORT_SYMBOL_GPL(gta02hdq_initialized); -+ -+int gta02hdq_read(int address) -+{ -+ int count_sleeps = 5; -+ int ret = -ETIME; -+ -+ mutex_lock(&fiq_ipc.hdq_lock); -+ -+ fiq_ipc.hdq_ads = address | HDQ_READ; -+ fiq_ipc.hdq_request_ctr++; -+ fiq_kick(); -+ /* -+ * FIQ takes care of it while we block our calling process -+ * But we're not spinning -- other processes run normally while -+ * we wait for the result -+ */ -+ while (count_sleeps--) { -+ msleep(10); /* valid transaction always completes in < 10ms */ -+ -+ if (fiq_ipc.hdq_request_ctr != fiq_ipc.hdq_transaction_ctr) -+ continue; -+ -+ if (fiq_ipc.hdq_error) -+ goto done; /* didn't see a response in good time */ -+ -+ ret = fiq_ipc.hdq_rx_data; -+ goto done; -+ } -+ ret = -EINVAL; -+ -+done: -+ mutex_unlock(&fiq_ipc.hdq_lock); -+ return ret; -+} -+EXPORT_SYMBOL_GPL(gta02hdq_read); -+ -+int gta02hdq_write(int address, u8 data) -+{ -+ int count_sleeps = 5; -+ int ret = -ETIME; -+ -+ mutex_lock(&fiq_ipc.hdq_lock); -+ -+ fiq_ipc.hdq_ads = address | HDQ_WRITE; -+ fiq_ipc.hdq_tx_data = data; -+ fiq_ipc.hdq_request_ctr++; -+ fiq_kick(); -+ /* -+ * FIQ takes care of it while we block our calling process -+ * But we're not spinning -- other processes run normally while -+ * we wait for the result -+ */ -+ while (count_sleeps--) { -+ msleep(10); /* valid transaction always completes in < 10ms */ -+ -+ if (fiq_ipc.hdq_request_ctr != fiq_ipc.hdq_transaction_ctr) -+ continue; /* something bad with FIQ */ -+ -+ if (fiq_ipc.hdq_error) -+ goto done; /* didn't see a response in good time */ -+ } -+ ret = -EINVAL; -+ -+done: -+ mutex_unlock(&fiq_ipc.hdq_lock); -+ return ret; -+} -+EXPORT_SYMBOL_GPL(gta02hdq_write); -+ -+/* sysfs */ -+ -+static ssize_t hdq_sysfs_dump(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ int n; -+ int v; -+ u8 u8a[128]; /* whole address space for HDQ */ -+ char *end = buf; -+ -+ /* the dump does not take care about 16 bit regs, because at this -+ * bus level we don't know about the chip details -+ */ -+ for (n = 0; n < sizeof(u8a); n++) { -+ v = gta02hdq_read(n); -+ if (v < 0) -+ goto bail; -+ u8a[n] = v; -+ } -+ -+ for (n = 0; n < sizeof(u8a); n += 16) { -+ hex_dump_to_buffer(u8a + n, sizeof(u8a), 16, 1, end, 4096, 0); -+ end += strlen(end); -+ *end++ = '\n'; -+ *end = '\0'; -+ } -+ return (end - buf); -+ -+bail: -+ return sprintf(buf, "ERROR %d\n", v); -+} -+ -+/* you write by
, eg, "34 128" */ -+ -+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0) -+ -+static ssize_t hdq_sysfs_write(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ const char *end = buf + count; -+ int address = atoi(buf); -+ -+ while ((buf != end) && (*buf != ' ')) -+ buf++; -+ if (buf >= end) -+ return 0; -+ while ((buf < end) && (*buf == ' ')) -+ buf++; -+ if (buf >= end) -+ return 0; -+ -+ gta02hdq_write(address, atoi(buf)); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(dump, 0400, hdq_sysfs_dump, NULL); -+static DEVICE_ATTR(write, 0600, NULL, hdq_sysfs_write); -+ -+static struct attribute *gta02hdq_sysfs_entries[] = { -+ &dev_attr_dump.attr, -+ &dev_attr_write.attr, -+ NULL -+}; -+ -+static struct attribute_group gta02hdq_attr_group = { -+ .name = "hdq", -+ .attrs = gta02hdq_sysfs_entries, -+}; -+ -+ -+#ifdef CONFIG_PM -+static int gta02hdq_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ /* after 18s of this, the battery monitor will also go to sleep */ -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 0); -+ s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_OUTPUT); -+ return 0; -+} -+ -+static int gta02hdq_resume(struct platform_device *pdev) -+{ -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1); -+ s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_OUTPUT); -+ return 0; -+} -+#endif -+ -+static int __init gta02hdq_probe(struct platform_device *pdev) -+{ -+ struct resource *r = platform_get_resource(pdev, 0, 0); -+ -+ if (!machine_is_neo1973_gta02()) -+ return -EIO; -+ -+ if (!r) -+ return -EINVAL; -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ mutex_init(&fiq_ipc.hdq_lock); -+ -+ /* set our HDQ comms pin from the platform data */ -+ fiq_ipc.hdq_gpio_pin = r->start; -+ -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1); -+ s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_OUTPUT); -+ -+ fiq_ipc.hdq_probed = 1; /* we are ready to do stuff now */ -+ -+ return sysfs_create_group(&pdev->dev.kobj, >a02hdq_attr_group); -+} -+ -+static int gta02hdq_remove(struct platform_device *pdev) -+{ -+ sysfs_remove_group(&pdev->dev.kobj, >a02hdq_attr_group); -+ return 0; -+} -+ -+static struct platform_driver gta02hdq_driver = { -+ .probe = gta02hdq_probe, -+ .remove = gta02hdq_remove, -+#ifdef CONFIG_PM -+ .suspend = gta02hdq_suspend, -+ .resume = gta02hdq_resume, -+#endif -+ .driver = { -+ .name = "gta02-hdq", -+ }, -+}; -+ -+static int __init gta02hdq_init(void) -+{ -+ return platform_driver_register(>a02hdq_driver); -+} -+ -+static void __exit gta02hdq_exit(void) -+{ -+ platform_driver_unregister(>a02hdq_driver); -+} -+ -+module_init(gta02hdq_init); -+module_exit(gta02hdq_exit); -+ -+MODULE_AUTHOR("Andy Green "); -+MODULE_DESCRIPTION("GTA02 HDQ driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.24.7/drivers/power/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/power/Kconfig 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/power/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -49,4 +49,24 @@ config BATTERY_OLPC - help - Say Y to enable support for the battery on the OLPC laptop. - -+config BATTERY_BQ27000_HDQ -+ tristate "BQ27000 HDQ battery monitor driver" -+ help -+ Say Y to enable support for the battery on the Neo Freerunner -+ -+config GTA02_HDQ -+ tristate "Neo Freerunner HDQ" -+ depends on MACH_NEO1973_GTA02 && FIQ && S3C2440_C_FIQ -+ help -+ Say Y to enable support for communicating with an HDQ battery -+ on the Neo Freerunner. You probably want to select -+ at least BATTERY_BQ27000_HDQ as well -+ -+config BATTERY_GTA01 -+ tristate "Neo GTA01 battery" -+ depends on MACH_NEO1973_GTA01 -+ help -+ Say Y to enable support for the battery on the Neo GTA01 -+ - endif # POWER_SUPPLY -+ -Index: linux-2.6.24.7/drivers/power/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/power/Makefile 2008-12-11 22:46:07.000000000 +0100 -+++ linux-2.6.24.7/drivers/power/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -20,3 +20,7 @@ obj-$(CONFIG_APM_POWER) += apm_power.o - obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o - obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o - obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o -+obj-$(CONFIG_BATTERY_BQ27000_HDQ) += bq27000_battery.o -+obj-$(CONFIG_BATTERY_GTA01) += gta01_battery.o -+ -+obj-$(CONFIG_GTA02_HDQ) += gta02_hdq.o -Index: linux-2.6.24.7/drivers/sdio/function/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/Kconfig 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,11 @@ -+#menu "SDIO function drivers" -+ -+config SDIO_AR6000_WLAN -+ tristate "ar6000 wireless networking over sdio" -+ depends on SDIO -+ select WIRELESS_EXT -+ default m -+ help -+ good luck. -+ -+#endmenu -\ No newline at end of file -Index: linux-2.6.24.7/drivers/sdio/function/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1 @@ -+obj-$(CONFIG_SDIO_AR6000_WLAN) += wlan/ -\ No newline at end of file -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ar6000_drv.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ar6000_drv.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,3078 @@ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+/* -+ * This driver is a pseudo ethernet driver to access the Atheros AR6000 -+ * WLAN Device -+ */ -+static const char athId[] __attribute__ ((unused)) = "$Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/ar6000_drv.c#2 $"; -+ -+#include "ar6000_drv.h" -+#include "htc.h" -+ -+MODULE_LICENSE("GPL and additional rights"); -+ -+#ifndef REORG_APTC_HEURISTICS -+#undef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+#endif /* REORG_APTC_HEURISTICS */ -+ -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+#define APTC_TRAFFIC_SAMPLING_INTERVAL 100 /* msec */ -+#define APTC_UPPER_THROUGHPUT_THRESHOLD 3000 /* Kbps */ -+#define APTC_LOWER_THROUGHPUT_THRESHOLD 2000 /* Kbps */ -+ -+typedef struct aptc_traffic_record { -+ A_BOOL timerScheduled; -+ struct timeval samplingTS; -+ unsigned long bytesReceived; -+ unsigned long bytesTransmitted; -+} APTC_TRAFFIC_RECORD; -+ -+A_TIMER aptcTimer; -+APTC_TRAFFIC_RECORD aptcTR; -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+ -+int bmienable = 0; -+unsigned int bypasswmi = 0; -+unsigned int debuglevel = 0; -+int tspecCompliance = 1; -+unsigned int busspeedlow = 0; -+unsigned int onebitmode = 0; -+unsigned int skipflash = 0; -+unsigned int wmitimeout = 2; -+unsigned int wlanNodeCaching = 1; -+unsigned int enableuartprint = 0; -+unsigned int logWmiRawMsgs = 0; -+unsigned int enabletimerwar = 0; -+unsigned int mbox_yield_limit = 99; -+int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF; -+int allow_trace_signal = 0; -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+unsigned int testmode =0; -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+module_param(bmienable, int, 0644); -+module_param(bypasswmi, int, 0644); -+module_param(debuglevel, int, 0644); -+module_param(tspecCompliance, int, 0644); -+module_param(onebitmode, int, 0644); -+module_param(busspeedlow, int, 0644); -+module_param(skipflash, int, 0644); -+module_param(wmitimeout, int, 0644); -+module_param(wlanNodeCaching, int, 0644); -+module_param(logWmiRawMsgs, int, 0644); -+module_param(enableuartprint, int, 0644); -+module_param(enabletimerwar, int, 0644); -+module_param(mbox_yield_limit, int, 0644); -+module_param(reduce_credit_dribble, int, 0644); -+module_param(allow_trace_signal, int, 0644); -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+module_param(testmode, int, 0644); -+#endif -+#else -+ -+#define __user -+/* for linux 2.4 and lower */ -+MODULE_PARM(bmienable,"i"); -+MODULE_PARM(bypasswmi,"i"); -+MODULE_PARM(debuglevel, "i"); -+MODULE_PARM(onebitmode,"i"); -+MODULE_PARM(busspeedlow, "i"); -+MODULE_PARM(skipflash, "i"); -+MODULE_PARM(wmitimeout, "i"); -+MODULE_PARM(wlanNodeCaching, "i"); -+MODULE_PARM(enableuartprint,"i"); -+MODULE_PARM(logWmiRawMsgs, "i"); -+MODULE_PARM(enabletimerwar,"i"); -+MODULE_PARM(mbox_yield_limit,"i"); -+MODULE_PARM(reduce_credit_dribble,"i"); -+MODULE_PARM(allow_trace_signal,"i"); -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+MODULE_PARM(testmode, "i"); -+#endif -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) -+/* in 2.6.10 and later this is now a pointer to a uint */ -+unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX; -+#define mboxnum &_mboxnum -+#else -+unsigned int mboxnum = HTC_MAILBOX_NUM_MAX; -+#endif -+ -+#ifdef DEBUG -+A_UINT32 g_dbg_flags = DBG_DEFAULTS; -+unsigned int debugflags = 0; -+int debugdriver = 1; -+unsigned int debughtc = 128; -+unsigned int debugbmi = 1; -+unsigned int debughif = 2; -+unsigned int resetok = 1; -+unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0}; -+unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0}; -+unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0}; -+unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0}; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+module_param(debugflags, int, 0644); -+module_param(debugdriver, int, 0644); -+module_param(debughtc, int, 0644); -+module_param(debugbmi, int, 0644); -+module_param(debughif, int, 0644); -+module_param(resetok, int, 0644); -+module_param_array(txcreditsavailable, int, mboxnum, 0644); -+module_param_array(txcreditsconsumed, int, mboxnum, 0644); -+module_param_array(txcreditintrenable, int, mboxnum, 0644); -+module_param_array(txcreditintrenableaggregate, int, mboxnum, 0644); -+#else -+/* linux 2.4 and lower */ -+MODULE_PARM(debugflags,"i"); -+MODULE_PARM(debugdriver, "i"); -+MODULE_PARM(debughtc, "i"); -+MODULE_PARM(debugbmi, "i"); -+MODULE_PARM(debughif, "i"); -+MODULE_PARM(resetok, "i"); -+MODULE_PARM(txcreditsavailable, "0-3i"); -+MODULE_PARM(txcreditsconsumed, "0-3i"); -+MODULE_PARM(txcreditintrenable, "0-3i"); -+MODULE_PARM(txcreditintrenableaggregate, "0-3i"); -+#endif -+ -+#else -+unsigned int resetok = 1; -+ -+#endif /* DEBUG */ -+ -+unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0}; -+unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0}; -+unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0}; -+unsigned int hifBusRequestNumMax = 40; -+unsigned int war23838_disabled = 0; -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+unsigned int enableAPTCHeuristics = 1; -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+module_param_array(tx_attempt, int, mboxnum, 0644); -+module_param_array(tx_post, int, mboxnum, 0644); -+module_param_array(tx_complete, int, mboxnum, 0644); -+module_param(hifBusRequestNumMax, int, 0644); -+module_param(war23838_disabled, int, 0644); -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+module_param(enableAPTCHeuristics, int, 0644); -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+#else -+MODULE_PARM(tx_attempt, "0-3i"); -+MODULE_PARM(tx_post, "0-3i"); -+MODULE_PARM(tx_complete, "0-3i"); -+MODULE_PARM(hifBusRequestNumMax, "i"); -+MODULE_PARM(war23838_disabled, "i"); -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+MODULE_PARM(enableAPTCHeuristics, "i"); -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+#endif -+ -+#ifdef BLOCK_TX_PATH_FLAG -+int blocktx = 0; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+module_param(blocktx, int, 0644); -+#else -+MODULE_PARM(blocktx, "i"); -+#endif -+#endif /* BLOCK_TX_PATH_FLAG */ -+ -+// TODO move to arsoft_c -+USER_RSSI_THOLD rssi_map[12]; -+ -+int reconnect_flag = 0; -+ -+DECLARE_WAIT_QUEUE_HEAD(ar6000_scan_queue); -+ -+/* Function declarations */ -+static int ar6000_init_module(void); -+static void ar6000_cleanup_module(void); -+ -+int ar6000_init(struct net_device *dev); -+static int ar6000_open(struct net_device *dev); -+static int ar6000_close(struct net_device *dev); -+static void ar6000_init_control_info(AR_SOFTC_T *ar); -+static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev); -+ -+static void ar6000_destroy(struct net_device *dev, unsigned int unregister); -+static void ar6000_detect_error(unsigned long ptr); -+static struct net_device_stats *ar6000_get_stats(struct net_device *dev); -+static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev); -+ -+/* -+ * HTC service connection handlers -+ */ -+static void ar6000_avail_ev(HTC_HANDLE HTCHandle); -+ -+static void ar6000_unavail_ev(void *Instance); -+ -+static void ar6000_target_failure(void *Instance, A_STATUS Status); -+ -+static void ar6000_rx(void *Context, HTC_PACKET *pPacket); -+ -+static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint); -+ -+static void ar6000_tx_complete(void *Context, HTC_PACKET *pPacket); -+ -+static void ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint); -+ -+/* -+ * Static variables -+ */ -+ -+static struct net_device *ar6000_devices[MAX_AR6000]; -+extern struct iw_handler_def ath_iw_handler_def; -+DECLARE_WAIT_QUEUE_HEAD(arEvent); -+static void ar6000_cookie_init(AR_SOFTC_T *ar); -+static void ar6000_cookie_cleanup(AR_SOFTC_T *ar); -+static void ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie); -+static struct ar_cookie *ar6000_alloc_cookie(AR_SOFTC_T *ar); -+static void ar6000_TxDataCleanup(AR_SOFTC_T *ar); -+ -+#ifdef USER_KEYS -+static A_STATUS ar6000_reinstall_keys(AR_SOFTC_T *ar,A_UINT8 key_op_ctrl); -+#endif -+ -+ -+static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM]; -+ -+#define HOST_INTEREST_ITEM_ADDRESS(ar, item) \ -+((ar->arTargetType == TARGET_TYPE_AR6001) ? \ -+ AR6001_HOST_INTEREST_ITEM_ADDRESS(item) : \ -+ AR6002_HOST_INTEREST_ITEM_ADDRESS(item)) -+ -+ -+/* Debug log support */ -+ -+/* -+ * Flag to govern whether the debug logs should be parsed in the kernel -+ * or reported to the application. -+ */ -+#ifdef DEBUG -+#define REPORT_DEBUG_LOGS_TO_APP -+#endif -+ -+A_STATUS -+ar6000_set_host_app_area(AR_SOFTC_T *ar) -+{ -+ A_UINT32 address, data; -+ struct host_app_area_s host_app_area; -+ -+ /* Fetch the address of the host_app_area_s instance in the host interest area */ -+ address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest); -+ if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != A_OK) { -+ return A_ERROR; -+ } -+ address = data; -+ host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION; -+ if (ar6000_WriteDataDiag(ar->arHifDevice, address, -+ (A_UCHAR *)&host_app_area, -+ sizeof(struct host_app_area_s)) != A_OK) -+ { -+ return A_ERROR; -+ } -+ -+ return A_OK; -+} -+ -+A_UINT32 -+dbglog_get_debug_hdr_ptr(AR_SOFTC_T *ar) -+{ -+ A_UINT32 param; -+ A_UINT32 address; -+ A_STATUS status; -+ -+ address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr); -+ if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address, -+ (A_UCHAR *)¶m, 4)) != A_OK) -+ { -+ param = 0; -+ } -+ -+ return param; -+} -+ -+/* -+ * The dbglog module has been initialized. Its ok to access the relevant -+ * data stuctures over the diagnostic window. -+ */ -+void -+ar6000_dbglog_init_done(AR_SOFTC_T *ar) -+{ -+ ar->dbglog_init_done = TRUE; -+} -+ -+A_UINT32 -+dbglog_get_debug_fragment(A_INT8 *datap, A_UINT32 len, A_UINT32 limit) -+{ -+ A_INT32 *buffer; -+ A_UINT32 count; -+ A_UINT32 numargs; -+ A_UINT32 length; -+ A_UINT32 fraglen; -+ -+ count = fraglen = 0; -+ buffer = (A_INT32 *)datap; -+ length = (limit >> 2); -+ -+ if (len <= limit) { -+ fraglen = len; -+ } else { -+ while (count < length) { -+ numargs = DBGLOG_GET_NUMARGS(buffer[count]); -+ fraglen = (count << 2); -+ count += numargs + 1; -+ } -+ } -+ -+ return fraglen; -+} -+ -+void -+dbglog_parse_debug_logs(A_INT8 *datap, A_UINT32 len) -+{ -+ A_INT32 *buffer; -+ A_UINT32 count; -+ A_UINT32 timestamp; -+ A_UINT32 debugid; -+ A_UINT32 moduleid; -+ A_UINT32 numargs; -+ A_UINT32 length; -+ -+ count = 0; -+ buffer = (A_INT32 *)datap; -+ length = (len >> 2); -+ while (count < length) { -+ debugid = DBGLOG_GET_DBGID(buffer[count]); -+ moduleid = DBGLOG_GET_MODULEID(buffer[count]); -+ numargs = DBGLOG_GET_NUMARGS(buffer[count]); -+ timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]); -+ switch (numargs) { -+ case 0: -+ AR_DEBUG_PRINTF("%d %d (%d)\n", moduleid, debugid, timestamp); -+ break; -+ -+ case 1: -+ AR_DEBUG_PRINTF("%d %d (%d): 0x%x\n", moduleid, debugid, -+ timestamp, buffer[count+1]); -+ break; -+ -+ case 2: -+ AR_DEBUG_PRINTF("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid, -+ timestamp, buffer[count+1], buffer[count+2]); -+ break; -+ -+ default: -+ AR_DEBUG_PRINTF("Invalid args: %d\n", numargs); -+ } -+ count += numargs + 1; -+ } -+} -+ -+int -+ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar) -+{ -+ struct dbglog_hdr_s debug_hdr; -+ struct dbglog_buf_s debug_buf; -+ A_UINT32 address; -+ A_UINT32 length; -+ A_UINT32 dropped; -+ A_UINT32 firstbuf; -+ A_UINT32 debug_hdr_ptr; -+ -+ if (!ar->dbglog_init_done) return A_ERROR; -+ -+ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ -+ if (ar->dbgLogFetchInProgress) { -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ return A_EBUSY; -+ } -+ -+ /* block out others */ -+ ar->dbgLogFetchInProgress = TRUE; -+ -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ -+ debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar); -+ printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr); -+ -+ /* Get the contents of the ring buffer */ -+ if (debug_hdr_ptr) { -+ address = debug_hdr_ptr; -+ length = sizeof(struct dbglog_hdr_s); -+ ar6000_ReadDataDiag(ar->arHifDevice, address, -+ (A_UCHAR *)&debug_hdr, length); -+ address = (A_UINT32)debug_hdr.dbuf; -+ firstbuf = address; -+ dropped = debug_hdr.dropped; -+ length = sizeof(struct dbglog_buf_s); -+ ar6000_ReadDataDiag(ar->arHifDevice, address, -+ (A_UCHAR *)&debug_buf, length); -+ -+ do { -+ address = (A_UINT32)debug_buf.buffer; -+ length = debug_buf.length; -+ if ((length) && (debug_buf.length <= debug_buf.bufsize)) { -+ /* Rewind the index if it is about to overrun the buffer */ -+ if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) { -+ ar->log_cnt = 0; -+ } -+ if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address, -+ (A_UCHAR *)&ar->log_buffer[ar->log_cnt], length)) -+ { -+ break; -+ } -+ ar6000_dbglog_event(ar, dropped, &ar->log_buffer[ar->log_cnt], length); -+ ar->log_cnt += length; -+ } else { -+ AR_DEBUG_PRINTF("Length: %d (Total size: %d)\n", -+ debug_buf.length, debug_buf.bufsize); -+ } -+ -+ address = (A_UINT32)debug_buf.next; -+ length = sizeof(struct dbglog_buf_s); -+ if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address, -+ (A_UCHAR *)&debug_buf, length)) -+ { -+ break; -+ } -+ -+ } while (address != firstbuf); -+ } -+ -+ ar->dbgLogFetchInProgress = FALSE; -+ -+ return A_OK; -+} -+ -+void -+ar6000_dbglog_event(AR_SOFTC_T *ar, A_UINT32 dropped, -+ A_INT8 *buffer, A_UINT32 length) -+{ -+#ifdef REPORT_DEBUG_LOGS_TO_APP -+ #define MAX_WIRELESS_EVENT_SIZE 252 -+ /* -+ * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages. -+ * There seems to be a limitation on the length of message that could be -+ * transmitted to the user app via this mechanism. -+ */ -+ A_UINT32 send, sent; -+ -+ sent = 0; -+ send = dbglog_get_debug_fragment(&buffer[sent], length - sent, -+ MAX_WIRELESS_EVENT_SIZE); -+ while (send) { -+ ar6000_send_event_to_app(ar, WMIX_DBGLOG_EVENTID, &buffer[sent], send); -+ sent += send; -+ send = dbglog_get_debug_fragment(&buffer[sent], length - sent, -+ MAX_WIRELESS_EVENT_SIZE); -+ } -+#else -+ AR_DEBUG_PRINTF("Dropped logs: 0x%x\nDebug info length: %d\n", -+ dropped, length); -+ -+ /* Interpret the debug logs */ -+ dbglog_parse_debug_logs(buffer, length); -+#endif /* REPORT_DEBUG_LOGS_TO_APP */ -+} -+ -+ -+ -+static int __init -+ar6000_init_module(void) -+{ -+ static int probed = 0; -+ A_STATUS status; -+ HTC_INIT_INFO initInfo; -+ -+ A_MEMZERO(&initInfo,sizeof(initInfo)); -+ initInfo.AddInstance = ar6000_avail_ev; -+ initInfo.DeleteInstance = ar6000_unavail_ev; -+ initInfo.TargetFailure = ar6000_target_failure; -+ -+ -+#ifdef DEBUG -+ /* Set the debug flags if specified at load time */ -+ if(debugflags != 0) -+ { -+ g_dbg_flags = debugflags; -+ } -+#endif -+ -+ if (probed) { -+ return -ENODEV; -+ } -+ probed++; -+ -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+ memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD)); -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+ -+#ifdef CONFIG_HOST_GPIO_SUPPORT -+ ar6000_gpio_init(); -+#endif /* CONFIG_HOST_GPIO_SUPPORT */ -+ -+ status = HTCInit(&initInfo); -+ if(status != A_OK) -+ return -ENODEV; -+ -+ return 0; -+} -+ -+static void __exit -+ar6000_cleanup_module(void) -+{ -+ int i = 0; -+ struct net_device *ar6000_netdev; -+ -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+ /* Delete the Adaptive Power Control timer */ -+ if (timer_pending(&aptcTimer)) { -+ del_timer_sync(&aptcTimer); -+ } -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+ -+ for (i=0; i < MAX_AR6000; i++) { -+ if (ar6000_devices[i] != NULL) { -+ ar6000_netdev = ar6000_devices[i]; -+ ar6000_devices[i] = NULL; -+ ar6000_destroy(ar6000_netdev, 1); -+ } -+ } -+ -+ /* shutting down HTC will cause the HIF layer to detach from the -+ * underlying bus driver which will cause the subsequent deletion of -+ * all HIF and HTC instances */ -+ HTCShutDown(); -+ -+ AR_DEBUG_PRINTF("ar6000_cleanup: success\n"); -+} -+ -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+void -+aptcTimerHandler(unsigned long arg) -+{ -+ A_UINT32 numbytes; -+ A_UINT32 throughput; -+ AR_SOFTC_T *ar; -+ A_STATUS status; -+ -+ ar = (AR_SOFTC_T *)arg; -+ A_ASSERT(ar != NULL); -+ A_ASSERT(!timer_pending(&aptcTimer)); -+ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ -+ /* Get the number of bytes transferred */ -+ numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived; -+ aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0; -+ -+ /* Calculate and decide based on throughput thresholds */ -+ throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */ -+ if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) { -+ /* Enable Sleep and delete the timer */ -+ A_ASSERT(ar->arWmiReady == TRUE); -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ status = wmi_powermode_cmd(ar->arWmi, REC_POWER); -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ A_ASSERT(status == A_OK); -+ aptcTR.timerScheduled = FALSE; -+ } else { -+ A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0); -+ } -+ -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+} -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+ -+ -+ -+/* set HTC block size, assume BMI is already initialized */ -+A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar) -+{ -+ A_STATUS status; -+ A_UINT32 blocksizes[HTC_MAILBOX_NUM_MAX]; -+ -+ do { -+ /* get the block sizes */ -+ status = HIFConfigureDevice(ar->arHifDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE, -+ blocksizes, sizeof(blocksizes)); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF("Failed to get block size info from HIF layer...\n"); -+ break; -+ } -+ /* note: we actually get the block size for mailbox 1, for SDIO the block -+ * size on mailbox 0 is artificially set to 1 */ -+ /* must be a power of 2 */ -+ A_ASSERT((blocksizes[1] & (blocksizes[1] - 1)) == 0); -+ -+ /* set the host interest area for the block size */ -+ status = BMIWriteMemory(ar->arHifDevice, -+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz), -+ (A_UCHAR *)&blocksizes[1], -+ 4); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF("BMIWriteMemory for IO block size failed \n"); -+ break; -+ } -+ -+ AR_DEBUG_PRINTF("Block Size Set: %d (target address:0x%X)\n", -+ blocksizes[1], HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz)); -+ -+ /* set the host interest area for the mbox ISR yield limit */ -+ status = BMIWriteMemory(ar->arHifDevice, -+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_isr_yield_limit), -+ (A_UCHAR *)&mbox_yield_limit, -+ 4); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF("BMIWriteMemory for yield limit failed \n"); -+ break; -+ } -+ -+ } while (FALSE); -+ -+ return status; -+} -+ -+/* -+ * HTC Event handlers -+ */ -+static void -+ar6000_avail_ev(HTC_HANDLE HTCHandle) -+{ -+ int i; -+ struct net_device *dev; -+ AR_SOFTC_T *ar; -+ int device_index = 0; -+ -+ AR_DEBUG_PRINTF("ar6000_available\n"); -+ -+ for (i=0; i < MAX_AR6000; i++) { -+ if (ar6000_devices[i] == NULL) { -+ break; -+ } -+ } -+ -+ if (i == MAX_AR6000) { -+ AR_DEBUG_PRINTF("ar6000_available: max devices reached\n"); -+ return; -+ } -+ -+ /* Save this. It gives a bit better readability especially since */ -+ /* we use another local "i" variable below. */ -+ device_index = i; -+ -+ A_ASSERT(HTCHandle != NULL); -+ -+ dev = alloc_etherdev(sizeof(AR_SOFTC_T)); -+ if (dev == NULL) { -+ AR_DEBUG_PRINTF("ar6000_available: can't alloc etherdev\n"); -+ return; -+ } -+ -+ ether_setup(dev); -+ -+ if (dev->priv == NULL) { -+ printk(KERN_CRIT "ar6000_available: Could not allocate memory\n"); -+ return; -+ } -+ -+ A_MEMZERO(dev->priv, sizeof(AR_SOFTC_T)); -+ -+ ar = (AR_SOFTC_T *)dev->priv; -+ ar->arNetDev = dev; -+ ar->arHtcTarget = HTCHandle; -+ ar->arHifDevice = HTCGetHifDevice(HTCHandle); -+ ar->arWlanState = WLAN_ENABLED; -+ ar->arRadioSwitch = WLAN_ENABLED; -+ ar->arDeviceIndex = device_index; -+ -+ A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev); -+ ar->arHBChallengeResp.seqNum = 0; -+ ar->arHBChallengeResp.outstanding = FALSE; -+ ar->arHBChallengeResp.missCnt = 0; -+ ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT; -+ ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT; -+ -+ ar6000_init_control_info(ar); -+ init_waitqueue_head(&arEvent); -+ sema_init(&ar->arSem, 1); -+ -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+ A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar); -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+ -+ /* -+ * If requested, perform some magic which requires no cooperation from -+ * the Target. It causes the Target to ignore flash and execute to the -+ * OS from ROM. -+ * -+ * This is intended to support recovery from a corrupted flash on Targets -+ * that support flash. -+ */ -+ if (skipflash) -+ { -+ ar6000_reset_device_skipflash(ar->arHifDevice); -+ } -+ -+ BMIInit(); -+ { -+ struct bmi_target_info targ_info; -+ -+ if (BMIGetTargetInfo(ar->arHifDevice, &targ_info) != A_OK) { -+ return; -+ } -+ -+ ar->arVersion.target_ver = targ_info.target_ver; -+ ar->arTargetType = targ_info.target_type; -+ } -+ -+ if (enableuartprint) { -+ A_UINT32 param; -+ param = 1; -+ if (BMIWriteMemory(ar->arHifDevice, -+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable), -+ (A_UCHAR *)¶m, -+ 4)!= A_OK) -+ { -+ AR_DEBUG_PRINTF("BMIWriteMemory for enableuartprint failed \n"); -+ return ; -+ } -+ AR_DEBUG_PRINTF("Serial console prints enabled\n"); -+ } -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+ if(testmode) { -+ ar->arTargetMode = AR6000_TCMD_MODE; -+ }else { -+ ar->arTargetMode = AR6000_WLAN_MODE; -+ } -+#endif -+ if (enabletimerwar) { -+ A_UINT32 param; -+ -+ if (BMIReadMemory(ar->arHifDevice, -+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), -+ (A_UCHAR *)¶m, -+ 4)!= A_OK) -+ { -+ AR_DEBUG_PRINTF("BMIReadMemory for enabletimerwar failed \n"); -+ return; -+ } -+ -+ param |= HI_OPTION_TIMER_WAR; -+ -+ if (BMIWriteMemory(ar->arHifDevice, -+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), -+ (A_UCHAR *)¶m, -+ 4) != A_OK) -+ { -+ AR_DEBUG_PRINTF("BMIWriteMemory for enabletimerwar failed \n"); -+ return; -+ } -+ AR_DEBUG_PRINTF("Timer WAR enabled\n"); -+ } -+ -+ -+ /* since BMIInit is called in the driver layer, we have to set the block -+ * size here for the target */ -+ -+ if (A_FAILED(ar6000_SetHTCBlockSize(ar))) { -+ return; -+ } -+ -+ spin_lock_init(&ar->arLock); -+ -+ /* Don't install the init function if BMI is requested */ -+ if(!bmienable) -+ { -+ dev->init = ar6000_init; -+ } else { -+ AR_DEBUG_PRINTF(" BMI enabled \n"); -+ } -+ -+ dev->open = &ar6000_open; -+ dev->stop = &ar6000_close; -+ dev->hard_start_xmit = &ar6000_data_tx; -+ dev->get_stats = &ar6000_get_stats; -+ -+ /* dev->tx_timeout = ar6000_tx_timeout; */ -+ dev->do_ioctl = &ar6000_ioctl; -+ dev->watchdog_timeo = AR6000_TX_TIMEOUT; -+ ar6000_ioctl_iwsetup(&ath_iw_handler_def); -+ dev->wireless_handlers = &ath_iw_handler_def; -+ ath_iw_handler_def.get_wireless_stats = ar6000_get_iwstats; /*Displayed via proc fs */ -+ -+ /* -+ * We need the OS to provide us with more headroom in order to -+ * perform dix to 802.3, WMI header encap, and the HTC header -+ */ -+ dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) + -+ sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN; -+ -+ /* This runs the init function */ -+ SET_NETDEV_DEV(dev, HIFGetOSDevice(ar->arHifDevice)); -+ if (register_netdev(dev)) { -+ AR_DEBUG_PRINTF("ar6000_avail: register_netdev failed\n"); -+ ar6000_destroy(dev, 0); -+ return; -+ } -+ -+ HTCSetInstance(ar->arHtcTarget, ar); -+ -+ /* We only register the device in the global list if we succeed. */ -+ /* If the device is in the global list, it will be destroyed */ -+ /* when the module is unloaded. */ -+ ar6000_devices[device_index] = dev; -+ -+ AR_DEBUG_PRINTF("ar6000_avail: name=%s htcTarget=0x%x, dev=0x%x (%d), ar=0x%x\n", -+ dev->name, (A_UINT32)HTCHandle, (A_UINT32)dev, device_index, -+ (A_UINT32)ar); -+} -+ -+static void ar6000_target_failure(void *Instance, A_STATUS Status) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance; -+ WMI_TARGET_ERROR_REPORT_EVENT errEvent; -+ static A_BOOL sip = FALSE; -+ -+ if (Status != A_OK) { -+ if (timer_pending(&ar->arHBChallengeResp.timer)) { -+ A_UNTIMEOUT(&ar->arHBChallengeResp.timer); -+ } -+ -+ /* try dumping target assertion information (if any) */ -+ ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType); -+ -+ /* -+ * Fetch the logs from the target via the diagnostic -+ * window. -+ */ -+ ar6000_dbglog_get_debug_logs(ar); -+ -+ /* Report the error only once */ -+ if (!sip) { -+ sip = TRUE; -+ errEvent.errorVal = WMI_TARGET_COM_ERR | -+ WMI_TARGET_FATAL_ERR; -+#ifdef SEND_EVENT_TO_APP -+ ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID, -+ (A_UINT8 *)&errEvent, -+ sizeof(WMI_TARGET_ERROR_REPORT_EVENT)); -+#endif -+ } -+ } -+} -+ -+static void -+ar6000_unavail_ev(void *Instance) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance; -+ /* NULL out it's entry in the global list */ -+ ar6000_devices[ar->arDeviceIndex] = NULL; -+ ar6000_destroy(ar->arNetDev, 1); -+} -+ -+/* -+ * We need to differentiate between the surprise and planned removal of the -+ * device because of the following consideration: -+ * - In case of surprise removal, the hcd already frees up the pending -+ * for the device and hence there is no need to unregister the function -+ * driver inorder to get these requests. For planned removal, the function -+ * driver has to explictly unregister itself to have the hcd return all the -+ * pending requests before the data structures for the devices are freed up. -+ * Note that as per the current implementation, the function driver will -+ * end up releasing all the devices since there is no API to selectively -+ * release a particular device. -+ * - Certain commands issued to the target can be skipped for surprise -+ * removal since they will anyway not go through. -+ */ -+static void -+ar6000_destroy(struct net_device *dev, unsigned int unregister) -+{ -+ AR_SOFTC_T *ar; -+ -+ AR_DEBUG_PRINTF("+ar6000_destroy \n"); -+ -+ if((dev == NULL) || ((ar = netdev_priv(dev)) == NULL)) -+ { -+ AR_DEBUG_PRINTF("%s(): Failed to get device structure.\n", __func__); -+ return; -+ } -+ -+ /* Stop the transmit queues */ -+ netif_stop_queue(dev); -+ -+ /* Disable the target and the interrupts associated with it */ -+ if (ar->arWmiReady == TRUE) -+ { -+ if (!bypasswmi) -+ { -+ if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) -+ { -+ AR_DEBUG_PRINTF("%s(): Disconnect\n", __func__); -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ ar6000_init_profile_info(ar); -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ wmi_disconnect_cmd(ar->arWmi); -+ } -+ -+ ar6000_dbglog_get_debug_logs(ar); -+ ar->arWmiReady = FALSE; -+ ar->arConnected = FALSE; -+ ar->arConnectPending = FALSE; -+ wmi_shutdown(ar->arWmi); -+ ar->arWmiEnabled = FALSE; -+ ar->arWmi = NULL; -+ ar->arWlanState = WLAN_ENABLED; -+#ifdef USER_KEYS -+ ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; -+ ar->user_key_ctrl = 0; -+#endif -+ } -+ -+ AR_DEBUG_PRINTF("%s(): WMI stopped\n", __func__); -+ } -+ else -+ { -+ AR_DEBUG_PRINTF("%s(): WMI not ready 0x%08x 0x%08x\n", -+ __func__, (unsigned int) ar, (unsigned int) ar->arWmi); -+ -+ /* Shut down WMI if we have started it */ -+ if(ar->arWmiEnabled == TRUE) -+ { -+ AR_DEBUG_PRINTF("%s(): Shut down WMI\n", __func__); -+ wmi_shutdown(ar->arWmi); -+ ar->arWmiEnabled = FALSE; -+ ar->arWmi = NULL; -+ } -+ } -+ -+ /* stop HTC */ -+ HTCStop(ar->arHtcTarget); -+ -+ /* set the instance to NULL so we do not get called back on remove incase we -+ * we're explicity destroyed by module unload */ -+ HTCSetInstance(ar->arHtcTarget, NULL); -+ -+ if (resetok) { -+ /* try to reset the device if we can -+ * The driver may have been configure NOT to reset the target during -+ * a debug session */ -+ AR_DEBUG_PRINTF(" Attempting to reset target on instance destroy.... \n"); -+ ar6000_reset_device(ar->arHifDevice, ar->arTargetType); -+ } else { -+ AR_DEBUG_PRINTF(" Host does not want target reset. \n"); -+ } -+ -+ /* Done with cookies */ -+ ar6000_cookie_cleanup(ar); -+ -+ /* Cleanup BMI */ -+ BMIInit(); -+ -+ /* Clear the tx counters */ -+ memset(tx_attempt, 0, sizeof(tx_attempt)); -+ memset(tx_post, 0, sizeof(tx_post)); -+ memset(tx_complete, 0, sizeof(tx_complete)); -+ -+ -+ /* Free up the device data structure */ -+ if (unregister) -+ unregister_netdev(dev); -+#ifndef free_netdev -+ kfree(dev); -+#else -+ free_netdev(dev); -+#endif -+ -+ AR_DEBUG_PRINTF("-ar6000_destroy \n"); -+} -+ -+static void ar6000_detect_error(unsigned long ptr) -+{ -+ struct net_device *dev = (struct net_device *)ptr; -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_TARGET_ERROR_REPORT_EVENT errEvent; -+ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ -+ if (ar->arHBChallengeResp.outstanding) { -+ ar->arHBChallengeResp.missCnt++; -+ } else { -+ ar->arHBChallengeResp.missCnt = 0; -+ } -+ -+ if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) { -+ /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */ -+ ar->arHBChallengeResp.missCnt = 0; -+ ar->arHBChallengeResp.seqNum = 0; -+ errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR; -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+#ifdef SEND_EVENT_TO_APP -+ ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID, -+ (A_UINT8 *)&errEvent, -+ sizeof(WMI_TARGET_ERROR_REPORT_EVENT)); -+#endif -+ return; -+ } -+ -+ /* Generate the sequence number for the next challenge */ -+ ar->arHBChallengeResp.seqNum++; -+ ar->arHBChallengeResp.outstanding = TRUE; -+ -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ -+ /* Send the challenge on the control channel */ -+ if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != A_OK) { -+ AR_DEBUG_PRINTF("Unable to send heart beat challenge\n"); -+ } -+ -+ -+ /* Reschedule the timer for the next challenge */ -+ A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0); -+} -+ -+void ar6000_init_profile_info(AR_SOFTC_T *ar) -+{ -+ ar->arSsidLen = 0; -+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); -+ ar->arNetworkType = INFRA_NETWORK; -+ ar->arDot11AuthMode = OPEN_AUTH; -+ ar->arAuthMode = NONE_AUTH; -+ ar->arPairwiseCrypto = NONE_CRYPT; -+ ar->arPairwiseCryptoLen = 0; -+ ar->arGroupCrypto = NONE_CRYPT; -+ ar->arGroupCryptoLen = 0; -+ A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList)); -+ A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); -+ A_MEMZERO(ar->arBssid, sizeof(ar->arBssid)); -+ ar->arBssChannel = 0; -+} -+ -+static void -+ar6000_init_control_info(AR_SOFTC_T *ar) -+{ -+ ar->arWmiEnabled = FALSE; -+ ar6000_init_profile_info(ar); -+ ar->arDefTxKeyIndex = 0; -+ A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList)); -+ ar->arChannelHint = 0; -+ ar->arListenInterval = MAX_LISTEN_INTERVAL; -+ ar->arVersion.host_ver = AR6K_SW_VERSION; -+ ar->arRssi = 0; -+ ar->arTxPwr = 0; -+ ar->arTxPwrSet = FALSE; -+ ar->arSkipScan = 0; -+ ar->arBeaconInterval = 0; -+ ar->arBitRate = 0; -+ ar->arMaxRetries = 0; -+ ar->arWmmEnabled = TRUE; -+} -+ -+static int -+ar6000_open(struct net_device *dev) -+{ -+ /* Wake up the queues */ -+ netif_wake_queue(dev); -+ -+ return 0; -+} -+ -+static int -+ar6000_close(struct net_device *dev) -+{ -+ netif_stop_queue(dev); -+ -+ return 0; -+} -+ -+/* connect to a service */ -+static A_STATUS ar6000_connectservice(AR_SOFTC_T *ar, -+ HTC_SERVICE_CONNECT_REQ *pConnect, -+ WMI_PRI_STREAM_ID WmiStreamID, -+ char *pDesc) -+{ -+ A_STATUS status; -+ HTC_SERVICE_CONNECT_RESP response; -+ -+ do { -+ -+ A_MEMZERO(&response,sizeof(response)); -+ -+ status = HTCConnectService(ar->arHtcTarget, -+ pConnect, -+ &response); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF(" Failed to connect to %s service status:%d \n", pDesc, status); -+ break; -+ } -+ -+ if (WmiStreamID == WMI_NOT_MAPPED) { -+ /* done */ -+ break; -+ } -+ -+ /* set endpoint mapping for the WMI stream in the driver layer */ -+ arSetWMIStream2EndpointIDMap(ar,WmiStreamID,response.Endpoint); -+ -+ } while (FALSE); -+ -+ return status; -+} -+ -+static void ar6000_TxDataCleanup(AR_SOFTC_T *ar) -+{ -+ /* flush all the data (non-control) streams -+ * we only flush packets that are tagged as data, we leave any control packets that -+ * were in the TX queues alone */ -+ HTCFlushEndpoint(ar->arHtcTarget, -+ arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI), -+ AR6K_DATA_PKT_TAG); -+ HTCFlushEndpoint(ar->arHtcTarget, -+ arWMIStream2EndpointID(ar,WMI_LOW_PRI), -+ AR6K_DATA_PKT_TAG); -+ HTCFlushEndpoint(ar->arHtcTarget, -+ arWMIStream2EndpointID(ar,WMI_HIGH_PRI), -+ AR6K_DATA_PKT_TAG); -+ HTCFlushEndpoint(ar->arHtcTarget, -+ arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI), -+ AR6K_DATA_PKT_TAG); -+} -+ -+/* This function does one time initialization for the lifetime of the device */ -+int ar6000_init(struct net_device *dev) -+{ -+ AR_SOFTC_T *ar; -+ A_STATUS status; -+ A_INT32 timeleft; -+ -+ if((ar = netdev_priv(dev)) == NULL) -+ { -+ return(-EIO); -+ } -+ -+ /* Do we need to finish the BMI phase */ -+ if(BMIDone(ar->arHifDevice) != A_OK) -+ { -+ return -EIO; -+ } -+ -+ if (!bypasswmi) -+ { -+#if 0 /* TBDXXX */ -+ if (ar->arVersion.host_ver != ar->arVersion.target_ver) { -+ A_PRINTF("WARNING: Host version 0x%x does not match Target " -+ " version 0x%x!\n", -+ ar->arVersion.host_ver, ar->arVersion.target_ver); -+ } -+#endif -+ -+ /* Indicate that WMI is enabled (although not ready yet) */ -+ ar->arWmiEnabled = TRUE; -+ if ((ar->arWmi = wmi_init((void *) ar)) == NULL) -+ { -+ AR_DEBUG_PRINTF("%s() Failed to initialize WMI.\n", __func__); -+ return(-EIO); -+ } -+ -+ AR_DEBUG_PRINTF("%s() Got WMI @ 0x%08x.\n", __func__, -+ (unsigned int) ar->arWmi); -+ } -+ -+ do { -+ HTC_SERVICE_CONNECT_REQ connect; -+ -+ /* the reason we have to wait for the target here is that the driver layer -+ * has to init BMI in order to set the host block size, -+ */ -+ status = HTCWaitTarget(ar->arHtcTarget); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ A_MEMZERO(&connect,sizeof(connect)); -+ /* meta data is unused for now */ -+ connect.pMetaData = NULL; -+ connect.MetaDataLength = 0; -+ /* these fields are the same for all service endpoints */ -+ connect.EpCallbacks.pContext = ar; -+ connect.EpCallbacks.EpTxComplete = ar6000_tx_complete; -+ connect.EpCallbacks.EpRecv = ar6000_rx; -+ connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill; -+ connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full; -+ /* set the max queue depth so that our ar6000_tx_queue_full handler gets called. -+ * Linux has the peculiarity of not providing flow control between the -+ * NIC and the network stack. There is no API to indicate that a TX packet -+ * was sent which could provide some back pressure to the network stack. -+ * Under linux you would have to wait till the network stack consumed all sk_buffs -+ * before any back-flow kicked in. Which isn't very friendly. -+ * So we have to manage this ourselves */ -+ connect.MaxSendQueueDepth = 32; -+ -+ /* connect to control service */ -+ connect.ServiceID = WMI_CONTROL_SVC; -+ status = ar6000_connectservice(ar, -+ &connect, -+ WMI_CONTROL_PRI, -+ "WMI CONTROL"); -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* for the remaining data services set the connection flag to reduce dribbling, -+ * if configured to do so */ -+ if (reduce_credit_dribble) { -+ connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE; -+ /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value -+ * of 0-3 */ -+ connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK; -+ connect.ConnectionFlags |= -+ ((A_UINT16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK; -+ } -+ /* connect to best-effort service */ -+ connect.ServiceID = WMI_DATA_BE_SVC; -+ -+ status = ar6000_connectservice(ar, -+ &connect, -+ WMI_BEST_EFFORT_PRI, -+ "WMI DATA BE"); -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* connect to back-ground -+ * map this to WMI LOW_PRI */ -+ connect.ServiceID = WMI_DATA_BK_SVC; -+ status = ar6000_connectservice(ar, -+ &connect, -+ WMI_LOW_PRI, -+ "WMI DATA BK"); -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* connect to Video service, map this to -+ * to HI PRI */ -+ connect.ServiceID = WMI_DATA_VI_SVC; -+ status = ar6000_connectservice(ar, -+ &connect, -+ WMI_HIGH_PRI, -+ "WMI DATA VI"); -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* connect to VO service, this is currently not -+ * mapped to a WMI priority stream due to historical reasons. -+ * WMI originally defined 3 priorities over 3 mailboxes -+ * We can change this when WMI is reworked so that priorities are not -+ * dependent on mailboxes */ -+ connect.ServiceID = WMI_DATA_VO_SVC; -+ status = ar6000_connectservice(ar, -+ &connect, -+ WMI_HIGHEST_PRI, -+ "WMI DATA VO"); -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_CONTROL_PRI) != 0); -+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI) != 0); -+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_LOW_PRI) != 0); -+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGH_PRI) != 0); -+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI) != 0); -+ } while (FALSE); -+ -+ if (A_FAILED(status)) { -+ return (-EIO); -+ } -+ -+ /* -+ * give our connected endpoints some buffers -+ */ -+ ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)); -+ -+ ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI)); -+ -+ /* -+ * We will post the receive buffers only for SPE testing and so we are -+ * making it conditional on the 'bypasswmi' flag. -+ */ -+ if (bypasswmi) { -+ ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_LOW_PRI)); -+ ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_HIGH_PRI)); -+ } -+ -+ /* setup credit distribution */ -+ ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo); -+ -+ /* Since cookies are used for HTC transports, they should be */ -+ /* initialized prior to enabling HTC. */ -+ ar6000_cookie_init(ar); -+ -+ /* start HTC */ -+ status = HTCStart(ar->arHtcTarget); -+ -+ if (status != A_OK) { -+ if (ar->arWmiEnabled == TRUE) { -+ wmi_shutdown(ar->arWmi); -+ ar->arWmiEnabled = FALSE; -+ ar->arWmi = NULL; -+ } -+ ar6000_cookie_cleanup(ar); -+ return -EIO; -+ } -+ -+ if (!bypasswmi) { -+ /* Wait for Wmi event to be ready */ -+ timeleft = wait_event_interruptible_timeout(arEvent, -+ (ar->arWmiReady == TRUE), wmitimeout * HZ); -+ -+ if(!timeleft || signal_pending(current)) -+ { -+ AR_DEBUG_PRINTF("WMI is not ready or wait was interrupted\n"); -+#if defined(DWSIM) /* TBDXXX */ -+ AR_DEBUG_PRINTF(".....but proceed anyway.\n"); -+#else -+ return -EIO; -+#endif -+ } -+ -+ AR_DEBUG_PRINTF("%s() WMI is ready\n", __func__); -+ -+ /* Communicate the wmi protocol verision to the target */ -+ if ((ar6000_set_host_app_area(ar)) != A_OK) { -+ AR_DEBUG_PRINTF("Unable to set the host app area\n"); -+ } -+ } -+ -+ ar->arNumDataEndPts = 1; -+ -+ return(0); -+} -+ -+ -+void -+ar6000_bitrate_rx(void *devt, A_INT32 rateKbps) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; -+ -+ ar->arBitRate = rateKbps; -+ wake_up(&arEvent); -+} -+ -+void -+ar6000_ratemask_rx(void *devt, A_UINT16 ratemask) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; -+ -+ ar->arRateMask = ratemask; -+ wake_up(&arEvent); -+} -+ -+void -+ar6000_txPwr_rx(void *devt, A_UINT8 txPwr) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; -+ -+ ar->arTxPwr = txPwr; -+ wake_up(&arEvent); -+} -+ -+ -+void -+ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; -+ -+ A_MEMCPY(ar->arChannelList, chanList, numChan * sizeof (A_UINT16)); -+ ar->arNumChannels = numChan; -+ -+ wake_up(&arEvent); -+} -+ -+A_UINT8 -+ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, A_UINT32 * mapNo) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ A_UINT8 *datap; -+ ATH_MAC_HDR *macHdr; -+ A_UINT32 i, eptMap; -+ -+ (*mapNo) = 0; -+ datap = A_NETBUF_DATA(skb); -+ macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR)); -+ if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) { -+ return ENDPOINT_2; -+ } -+ -+ eptMap = -1; -+ for (i = 0; i < ar->arNodeNum; i ++) { -+ if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) { -+ (*mapNo) = i + 1; -+ ar->arNodeMap[i].txPending ++; -+ return ar->arNodeMap[i].epId; -+ } -+ -+ if ((eptMap == -1) && !ar->arNodeMap[i].txPending) { -+ eptMap = i; -+ } -+ } -+ -+ if (eptMap == -1) { -+ eptMap = ar->arNodeNum; -+ ar->arNodeNum ++; -+ A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM); -+ } -+ -+ A_MEMCPY(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN); -+ -+ for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) { -+ if (!ar->arTxPending[i]) { -+ ar->arNodeMap[eptMap].epId = i; -+ break; -+ } -+ // No free endpoint is available, start redistribution on the inuse endpoints. -+ if (i == ENDPOINT_5) { -+ ar->arNodeMap[eptMap].epId = ar->arNexEpId; -+ ar->arNexEpId ++; -+ if (ar->arNexEpId > ENDPOINT_5) { -+ ar->arNexEpId = ENDPOINT_2; -+ } -+ } -+ } -+ -+ (*mapNo) = eptMap + 1; -+ ar->arNodeMap[eptMap].txPending ++; -+ -+ return ar->arNodeMap[eptMap].epId; -+} -+ -+#ifdef DEBUG -+static void ar6000_dump_skb(struct sk_buff *skb) -+{ -+ u_char *ch; -+ for (ch = A_NETBUF_DATA(skb); -+ (A_UINT32)ch < ((A_UINT32)A_NETBUF_DATA(skb) + -+ A_NETBUF_LEN(skb)); ch++) -+ { -+ AR_DEBUG_PRINTF("%2.2x ", *ch); -+ } -+ AR_DEBUG_PRINTF("\n"); -+} -+#endif -+ -+static int -+ar6000_data_tx(struct sk_buff *skb, struct net_device *dev) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_PRI_STREAM_ID streamID = WMI_NOT_MAPPED; -+ A_UINT32 mapNo = 0; -+ int len; -+ struct ar_cookie *cookie; -+ A_BOOL checkAdHocPsMapping = FALSE; -+ -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13) -+ skb->list = NULL; -+#endif -+ -+ AR_DEBUG2_PRINTF("ar6000_data_tx start - skb=0x%x, data=0x%x, len=0x%x\n", -+ (A_UINT32)skb, (A_UINT32)A_NETBUF_DATA(skb), -+ A_NETBUF_LEN(skb)); -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+ /* TCMD doesnt support any data, free the buf and return */ -+ if(ar->arTargetMode == AR6000_TCMD_MODE) { -+ A_NETBUF_FREE(skb); -+ return 0; -+ } -+#endif -+ do { -+ -+ if (ar->arWmiReady == FALSE && bypasswmi == 0) { -+ break; -+ } -+ -+#ifdef BLOCK_TX_PATH_FLAG -+ if (blocktx) { -+ break; -+ } -+#endif /* BLOCK_TX_PATH_FLAG */ -+ -+ if (ar->arWmiEnabled) { -+ if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len) { -+ struct sk_buff *newbuf; -+ /* -+ * We really should have gotten enough headroom but sometimes -+ * we still get packets with not enough headroom. Copy the packet. -+ */ -+ len = A_NETBUF_LEN(skb); -+ newbuf = A_NETBUF_ALLOC(len); -+ if (newbuf == NULL) { -+ break; -+ } -+ A_NETBUF_PUT(newbuf, len); -+ A_MEMCPY(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len); -+ A_NETBUF_FREE(skb); -+ skb = newbuf; -+ /* fall through and assemble header */ -+ } -+ -+ if (wmi_dix_2_dot3(ar->arWmi, skb) != A_OK) { -+ AR_DEBUG_PRINTF("ar6000_data_tx - wmi_dix_2_dot3 failed\n"); -+ break; -+ } -+ -+ if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE) != A_OK) { -+ AR_DEBUG_PRINTF("ar6000_data_tx - wmi_data_hdr_add failed\n"); -+ break; -+ } -+ -+ if ((ar->arNetworkType == ADHOC_NETWORK) && -+ ar->arIbssPsEnable && ar->arConnected) { -+ /* flag to check adhoc mapping once we take the lock below: */ -+ checkAdHocPsMapping = TRUE; -+ -+ } else { -+ /* get the stream mapping */ -+ if (ar->arWmmEnabled) { -+ streamID = wmi_get_stream_id(ar->arWmi, -+ wmi_implicit_create_pstream(ar->arWmi, skb, UPLINK_TRAFFIC, UNDEFINED_PRI)); -+ } else { -+ streamID = WMI_BEST_EFFORT_PRI; -+ } -+ } -+ -+ } else { -+ struct iphdr *ipHdr; -+ /* -+ * the endpoint is directly based on the TOS field in the IP -+ * header **** only for testing ****** -+ */ -+ ipHdr = A_NETBUF_DATA(skb) + sizeof(ATH_MAC_HDR); -+ /* here we map the TOS field to an endpoint number, this is for -+ * the endpointping test application */ -+ streamID = IP_TOS_TO_WMI_PRI(ipHdr->tos); -+ } -+ -+ } while (FALSE); -+ -+ /* did we succeed ? */ -+ if ((streamID == WMI_NOT_MAPPED) && !checkAdHocPsMapping) { -+ /* cleanup and exit */ -+ A_NETBUF_FREE(skb); -+ AR6000_STAT_INC(ar, tx_dropped); -+ AR6000_STAT_INC(ar, tx_aborted_errors); -+ return 0; -+ } -+ -+ cookie = NULL; -+ -+ /* take the lock to protect driver data */ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ -+ do { -+ -+ if (checkAdHocPsMapping) { -+ streamID = ar6000_ibss_map_epid(skb, dev, &mapNo); -+ } -+ -+ A_ASSERT(streamID != WMI_NOT_MAPPED); -+ -+ /* validate that the endpoint is connected */ -+ if (arWMIStream2EndpointID(ar,streamID) == 0) { -+ AR_DEBUG_PRINTF("Stream %d is NOT mapped!\n",streamID); -+ break; -+ } -+ /* allocate resource for this packet */ -+ cookie = ar6000_alloc_cookie(ar); -+ -+ if (cookie != NULL) { -+ /* update counts while the lock is held */ -+ ar->arTxPending[streamID]++; -+ ar->arTotalTxDataPending++; -+ } -+ -+ } while (FALSE); -+ -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ -+ if (cookie != NULL) { -+ cookie->arc_bp[0] = (A_UINT32)skb; -+ cookie->arc_bp[1] = mapNo; -+ SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, -+ cookie, -+ A_NETBUF_DATA(skb), -+ A_NETBUF_LEN(skb), -+ arWMIStream2EndpointID(ar,streamID), -+ AR6K_DATA_PKT_TAG); -+ -+#ifdef DEBUG -+ if (debugdriver >= 3) { -+ ar6000_dump_skb(skb); -+ } -+#endif -+ /* HTC interface is asynchronous, if this fails, cleanup will happen in -+ * the ar6000_tx_complete callback */ -+ HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); -+ } else { -+ /* no packet to send, cleanup */ -+ A_NETBUF_FREE(skb); -+ AR6000_STAT_INC(ar, tx_dropped); -+ AR6000_STAT_INC(ar, tx_aborted_errors); -+ } -+ -+ return 0; -+} -+ -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+static void -+tvsub(register struct timeval *out, register struct timeval *in) -+{ -+ if((out->tv_usec -= in->tv_usec) < 0) { -+ out->tv_sec--; -+ out->tv_usec += 1000000; -+ } -+ out->tv_sec -= in->tv_sec; -+} -+ -+void -+applyAPTCHeuristics(AR_SOFTC_T *ar) -+{ -+ A_UINT32 duration; -+ A_UINT32 numbytes; -+ A_UINT32 throughput; -+ struct timeval ts; -+ A_STATUS status; -+ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ -+ if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) { -+ do_gettimeofday(&ts); -+ tvsub(&ts, &aptcTR.samplingTS); -+ duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */ -+ numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived; -+ -+ if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) { -+ /* Initialize the time stamp and byte count */ -+ aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0; -+ do_gettimeofday(&aptcTR.samplingTS); -+ -+ /* Calculate and decide based on throughput thresholds */ -+ throughput = ((numbytes * 8) / duration); -+ if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) { -+ /* Disable Sleep and schedule a timer */ -+ A_ASSERT(ar->arWmiReady == TRUE); -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER); -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0); -+ aptcTR.timerScheduled = TRUE; -+ } -+ } -+ } -+ -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+} -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+ -+static void ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; -+ -+ -+ if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) { -+ if (!bypasswmi) { -+ /* under normal WMI if this is getting full, then something is running rampant -+ * the host should not be exhausting the WMI queue with too many commands -+ * the only exception to this is during testing using endpointping */ -+ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ /* set flag to handle subsequent messages */ -+ ar->arWMIControlEpFull = TRUE; -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ AR_DEBUG_PRINTF("WMI Control Endpoint is FULL!!! \n"); -+ } -+ } else { -+ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ ar->arNetQueueStopped = TRUE; -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ /* one of the data endpoints queues is getting full..need to stop network stack -+ * the queue will resume in ar6000_tx_complete() */ -+ netif_stop_queue(ar->arNetDev); -+ } -+ -+ -+} -+ -+ -+static void -+ar6000_tx_complete(void *Context, HTC_PACKET *pPacket) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; -+ void *cookie = (void *)pPacket->pPktContext; -+ struct sk_buff *skb = NULL; -+ A_UINT32 mapNo = 0; -+ A_STATUS status; -+ struct ar_cookie * ar_cookie; -+ WMI_PRI_STREAM_ID streamID; -+ A_BOOL wakeEvent = FALSE; -+ -+ status = pPacket->Status; -+ ar_cookie = (struct ar_cookie *)cookie; -+ skb = (struct sk_buff *)ar_cookie->arc_bp[0]; -+ streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint); -+ mapNo = ar_cookie->arc_bp[1]; -+ -+ A_ASSERT(skb); -+ A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(skb)); -+ -+ if (A_SUCCESS(status)) { -+ A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(skb)); -+ } -+ -+ AR_DEBUG2_PRINTF("ar6000_tx_complete skb=0x%x data=0x%x len=0x%x sid=%d ", -+ (A_UINT32)skb, (A_UINT32)pPacket->pBuffer, -+ pPacket->ActualLength, -+ streamID); -+ -+ /* lock the driver as we update internal state */ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ -+ ar->arTxPending[streamID]--; -+ -+ if ((streamID != WMI_CONTROL_PRI) || bypasswmi) { -+ ar->arTotalTxDataPending--; -+ } -+ -+ if (streamID == WMI_CONTROL_PRI) -+ { -+ if (ar->arWMIControlEpFull) { -+ /* since this packet completed, the WMI EP is no longer full */ -+ ar->arWMIControlEpFull = FALSE; -+ } -+ -+ if (ar->arTxPending[streamID] == 0) { -+ wakeEvent = TRUE; -+ } -+ } -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF("%s() -TX ERROR, status: 0x%x\n", __func__, -+ status); -+ AR6000_STAT_INC(ar, tx_errors); -+ } else { -+ AR_DEBUG2_PRINTF("OK\n"); -+ AR6000_STAT_INC(ar, tx_packets); -+ ar->arNetStats.tx_bytes += A_NETBUF_LEN(skb); -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+ aptcTR.bytesTransmitted += a_netbuf_to_len(skb); -+ applyAPTCHeuristics(ar); -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+ } -+ -+ // TODO this needs to be looked at -+ if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable -+ && (streamID != WMI_CONTROL_PRI) && mapNo) -+ { -+ mapNo --; -+ ar->arNodeMap[mapNo].txPending --; -+ -+ if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) { -+ A_UINT32 i; -+ for (i = ar->arNodeNum; i > 0; i --) { -+ if (!ar->arNodeMap[i - 1].txPending) { -+ A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping)); -+ ar->arNodeNum --; -+ } else { -+ break; -+ } -+ } -+ } -+ } -+ -+ /* Freeing a cookie should not be contingent on either of */ -+ /* these flags, just if we have a cookie or not. */ -+ /* Can we even get here without a cookie? Fix later. */ -+ if (ar->arWmiReady == TRUE || (bypasswmi)) -+ { -+ ar6000_free_cookie(ar, cookie); -+ } -+ -+ if (ar->arNetQueueStopped) { -+ ar->arNetQueueStopped = FALSE; -+ } -+ -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ -+ /* lock is released, we can freely call other kernel APIs */ -+ -+ /* this indirectly frees the HTC_PACKET */ -+ A_NETBUF_FREE(skb); -+ -+ if ((ar->arConnected == TRUE) || (bypasswmi)) { -+ if (status != A_ECANCELED) { -+ /* don't wake the queue if we are flushing, other wise it will just -+ * keep queueing packets, which will keep failing */ -+ netif_wake_queue(ar->arNetDev); -+ } -+ } -+ -+ if (wakeEvent) { -+ wake_up(&arEvent); -+ } -+ -+} -+ -+/* -+ * Receive event handler. This is called by HTC when a packet is received -+ */ -+int pktcount; -+static void -+ar6000_rx(void *Context, HTC_PACKET *pPacket) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; -+ struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext; -+ int minHdrLen; -+ A_STATUS status = pPacket->Status; -+ WMI_PRI_STREAM_ID streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint); -+ HTC_ENDPOINT_ID ept = pPacket->Endpoint; -+ -+ A_ASSERT((status != A_OK) || (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN))); -+ -+ AR_DEBUG2_PRINTF("ar6000_rx ar=0x%x sid=%d, skb=0x%x, data=0x%x, len=0x%x ", -+ (A_UINT32)ar, streamID, (A_UINT32)skb, (A_UINT32)pPacket->pBuffer, -+ pPacket->ActualLength); -+ if (status != A_OK) { -+ AR_DEBUG2_PRINTF("ERR\n"); -+ } else { -+ AR_DEBUG2_PRINTF("OK\n"); -+ } -+ -+ /* take lock to protect buffer counts -+ * and adaptive power throughput state */ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ -+ ar->arRxBuffers[streamID]--; -+ -+ if (A_SUCCESS(status)) { -+ AR6000_STAT_INC(ar, rx_packets); -+ ar->arNetStats.rx_bytes += pPacket->ActualLength; -+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -+ aptcTR.bytesReceived += a_netbuf_to_len(skb); -+ applyAPTCHeuristics(ar); -+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -+ -+ A_NETBUF_PUT(skb, pPacket->ActualLength + HTC_HEADER_LEN); -+ A_NETBUF_PULL(skb, HTC_HEADER_LEN); -+ -+#ifdef DEBUG -+ if (debugdriver >= 2) { -+ ar6000_dump_skb(skb); -+ } -+#endif /* DEBUG */ -+ } -+ -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ -+ if (status != A_OK) { -+ AR6000_STAT_INC(ar, rx_errors); -+ A_NETBUF_FREE(skb); -+ } else if (ar->arWmiEnabled == TRUE) { -+ if (streamID == WMI_CONTROL_PRI) { -+ /* -+ * this is a wmi control msg -+ */ -+ wmi_control_rx(ar->arWmi, skb); -+ } else { -+ WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb); -+ if (WMI_DATA_HDR_IS_MSG_TYPE(dhdr, CNTL_MSGTYPE)) { -+ /* -+ * this is a wmi control msg -+ */ -+ /* strip off WMI hdr */ -+ wmi_data_hdr_remove(ar->arWmi, skb); -+ wmi_control_rx(ar->arWmi, skb); -+ } else { -+ /* -+ * this is a wmi data packet -+ */ -+ minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) + -+ sizeof(ATH_LLC_SNAP_HDR); -+ -+ if ((pPacket->ActualLength < minHdrLen) || -+ (pPacket->ActualLength > AR6000_BUFFER_SIZE)) -+ { -+ /* -+ * packet is too short or too long -+ */ -+ AR_DEBUG_PRINTF("TOO SHORT or TOO LONG\n"); -+ AR6000_STAT_INC(ar, rx_errors); -+ AR6000_STAT_INC(ar, rx_length_errors); -+ A_NETBUF_FREE(skb); -+ } else { -+ if (ar->arWmmEnabled) { -+ wmi_implicit_create_pstream(ar->arWmi, skb, -+ DNLINK_TRAFFIC, UNDEFINED_PRI); -+ } -+#if 0 -+ /* Access RSSI values here */ -+ AR_DEBUG_PRINTF("RSSI %d\n", -+ ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi); -+#endif -+ wmi_data_hdr_remove(ar->arWmi, skb); -+ wmi_dot3_2_dix(ar->arWmi, skb); -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -+ /* -+ * extra push and memcpy, for eth_type_trans() of 2.4 kernel -+ * will pull out hard_header_len bytes of the skb. -+ */ -+ A_NETBUF_PUSH(skb, sizeof(WMI_DATA_HDR) + sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN); -+ A_MEMCPY(A_NETBUF_DATA(skb), A_NETBUF_DATA(skb) + sizeof(WMI_DATA_HDR) + -+ sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN, sizeof(ATH_MAC_HDR)); -+#endif -+ if ((ar->arNetDev->flags & IFF_UP) == IFF_UP) -+ { -+ skb->dev = ar->arNetDev; -+ skb->protocol = eth_type_trans(skb, ar->arNetDev); -+ netif_rx(skb); -+ } -+ else -+ { -+ A_NETBUF_FREE(skb); -+ } -+ } -+ } -+ } -+ } else { -+ if ((ar->arNetDev->flags & IFF_UP) == IFF_UP) -+ { -+ skb->dev = ar->arNetDev; -+ skb->protocol = eth_type_trans(skb, ar->arNetDev); -+ netif_rx(skb); -+ } -+ else -+ { -+ A_NETBUF_FREE(skb); -+ } -+ } -+ -+ if (status != A_ECANCELED) { -+ /* -+ * HTC provides A_ECANCELED status when it doesn't want to be refilled -+ * (probably due to a shutdown) -+ */ -+ ar6000_rx_refill(Context, ept); -+ } -+ -+ -+} -+ -+static void -+ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; -+ void *osBuf; -+ int RxBuffers; -+ int buffersToRefill; -+ HTC_PACKET *pPacket; -+ WMI_PRI_STREAM_ID streamId = arEndpoint2WMIStreamID(ar,Endpoint); -+ -+ buffersToRefill = (int)AR6000_MAX_RX_BUFFERS - -+ (int)ar->arRxBuffers[streamId]; -+ -+ if (buffersToRefill <= 0) { -+ /* fast return, nothing to fill */ -+ return; -+ } -+ -+ AR_DEBUG2_PRINTF("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n", -+ buffersToRefill, Endpoint); -+ -+ for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) { -+ osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE); -+ if (NULL == osBuf) { -+ break; -+ } -+ /* the HTC packet wrapper is at the head of the reserved area -+ * in the skb */ -+ pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf)); -+ /* set re-fill info */ -+ SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint); -+ /* add this packet */ -+ HTCAddReceivePkt(ar->arHtcTarget, pPacket); -+ } -+ -+ /* update count */ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ ar->arRxBuffers[streamId] += RxBuffers; -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+} -+ -+static struct net_device_stats * -+ar6000_get_stats(struct net_device *dev) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ return &ar->arNetStats; -+} -+ -+static struct iw_statistics * -+ar6000_get_iwstats(struct net_device * dev) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ TARGET_STATS *pStats = &ar->arTargetStats; -+ struct iw_statistics * pIwStats = &ar->arIwStats; -+ -+ if ((ar->arWmiReady == FALSE) -+ /* -+ * The in_atomic function is used to determine if the scheduling is -+ * allowed in the current context or not. This was introduced in 2.6 -+ * From what I have read on the differences between 2.4 and 2.6, the -+ * 2.4 kernel did not support preemption and so this check might not -+ * be required for 2.4 kernels. -+ */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ || (in_atomic()) -+#endif -+ ) -+ { -+ pIwStats->status = 0; -+ pIwStats->qual.qual = 0; -+ pIwStats->qual.level =0; -+ pIwStats->qual.noise = 0; -+ pIwStats->discard.code =0; -+ pIwStats->discard.retries=0; -+ pIwStats->miss.beacon =0; -+ return pIwStats; -+ } -+ if (down_interruptible(&ar->arSem)) { -+ pIwStats->status = 0; -+ return pIwStats; -+ } -+ -+ -+ ar->statsUpdatePending = TRUE; -+ -+ if(wmi_get_stats_cmd(ar->arWmi) != A_OK) { -+ up(&ar->arSem); -+ pIwStats->status = 0; -+ return pIwStats; -+ } -+ -+ wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ); -+ -+ if (signal_pending(current)) { -+ AR_DEBUG_PRINTF("ar6000 : WMI get stats timeout \n"); -+ up(&ar->arSem); -+ pIwStats->status = 0; -+ return pIwStats; -+ } -+ pIwStats->status = 1 ; -+ pIwStats->qual.qual = pStats->cs_aveBeacon_rssi; -+ pIwStats->qual.level =pStats->cs_aveBeacon_rssi + 161; /* noise is -95 dBm */ -+ pIwStats->qual.noise = pStats->noise_floor_calibation; -+ pIwStats->discard.code = pStats->rx_decrypt_err; -+ pIwStats->discard.retries = pStats->tx_retry_cnt; -+ pIwStats->miss.beacon = pStats->cs_bmiss_cnt; -+ up(&ar->arSem); -+ return pIwStats; -+} -+ -+void -+ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; -+ struct net_device *dev = ar->arNetDev; -+ -+ ar->arWmiReady = TRUE; -+ wake_up(&arEvent); -+ A_MEMCPY(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN); -+ AR_DEBUG_PRINTF("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", -+ dev->dev_addr[0], dev->dev_addr[1], -+ dev->dev_addr[2], dev->dev_addr[3], -+ dev->dev_addr[4], dev->dev_addr[5]); -+ -+ ar->arPhyCapability = phyCap; -+} -+ -+A_UINT8 -+ar6000_iptos_to_userPriority(A_UINT8 *pkt) -+{ -+ struct iphdr *ipHdr = (struct iphdr *)pkt; -+ A_UINT8 userPriority; -+ -+ /* -+ * IP Tos format : -+ * (Refer Pg 57 WMM-test-plan-v1.2) -+ * IP-TOS - 8bits -+ * : DSCP(6-bits) ECN(2-bits) -+ * : DSCP - P2 P1 P0 X X X -+ * where (P2 P1 P0) form 802.1D -+ */ -+ userPriority = ipHdr->tos >> 5; -+ return (userPriority & 0x7); -+} -+ -+void -+ar6000_connect_event(AR_SOFTC_T *ar, A_UINT16 channel, A_UINT8 *bssid, -+ A_UINT16 listenInterval, A_UINT16 beaconInterval, -+ NETWORK_TYPE networkType, A_UINT8 beaconIeLen, -+ A_UINT8 assocReqLen, A_UINT8 assocRespLen, -+ A_UINT8 *assocInfo) -+{ -+ union iwreq_data wrqu; -+ int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos; -+ static const char *tag1 = "ASSOCINFO(ReqIEs="; -+ static const char *tag2 = "ASSOCRESPIE="; -+ static const char *beaconIetag = "BEACONIE="; -+ char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + sizeof(tag1)]; -+ char *pos; -+ A_UINT8 key_op_ctrl; -+ -+ A_MEMCPY(ar->arBssid, bssid, sizeof(ar->arBssid)); -+ ar->arBssChannel = channel; -+ -+ A_PRINTF("AR6000 connected event on freq %d ", channel); -+ A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x " -+ " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d" -+ " assocRespLen =%d\n", -+ bssid[0], bssid[1], bssid[2], -+ bssid[3], bssid[4], bssid[5], -+ listenInterval, beaconInterval, -+ beaconIeLen, assocReqLen, assocRespLen); -+ if (networkType & ADHOC_NETWORK) { -+ if (networkType & ADHOC_CREATOR) { -+ A_PRINTF("Network: Adhoc (Creator)\n"); -+ } else { -+ A_PRINTF("Network: Adhoc (Joiner)\n"); -+ } -+ } else { -+ A_PRINTF("Network: Infrastructure\n"); -+ } -+ -+ if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) { -+ AR_DEBUG_PRINTF("\nBeaconIEs= "); -+ -+ beacon_ie_pos = 0; -+ A_MEMZERO(buf, sizeof(buf)); -+ sprintf(buf, "%s", beaconIetag); -+ pos = buf + 9; -+ for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) { -+ AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]); -+ sprintf(pos, "%2.2x", assocInfo[i]); -+ pos += 2; -+ } -+ AR_DEBUG_PRINTF("\n"); -+ -+ A_MEMZERO(&wrqu, sizeof(wrqu)); -+ wrqu.data.length = strlen(buf); -+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -+ } -+ -+ if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2)))) -+ { -+ assoc_resp_ie_pos = beaconIeLen + assocReqLen + -+ sizeof(A_UINT16) + /* capinfo*/ -+ sizeof(A_UINT16) + /* status Code */ -+ sizeof(A_UINT16) ; /* associd */ -+ A_MEMZERO(buf, sizeof(buf)); -+ sprintf(buf, "%s", tag2); -+ pos = buf + 12; -+ AR_DEBUG_PRINTF("\nAssocRespIEs= "); -+ /* -+ * The Association Response Frame w.o. the WLAN header is delivered to -+ * the host, so skip over to the IEs -+ */ -+ for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++) -+ { -+ AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]); -+ sprintf(pos, "%2.2x", assocInfo[i]); -+ pos += 2; -+ } -+ AR_DEBUG_PRINTF("\n"); -+ -+ A_MEMZERO(&wrqu, sizeof(wrqu)); -+ wrqu.data.length = strlen(buf); -+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -+ } -+ -+ if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) { -+ /* -+ * assoc Request includes capability and listen interval. Skip these. -+ */ -+ assoc_req_ie_pos = beaconIeLen + -+ sizeof(A_UINT16) + /* capinfo*/ -+ sizeof(A_UINT16); /* listen interval */ -+ -+ A_MEMZERO(buf, sizeof(buf)); -+ sprintf(buf, "%s", tag1); -+ pos = buf + 17; -+ AR_DEBUG_PRINTF("AssocReqIEs= "); -+ for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) { -+ AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]); -+ sprintf(pos, "%2.2x", assocInfo[i]); -+ pos += 2;; -+ } -+ AR_DEBUG_PRINTF("\n"); -+ -+ A_MEMZERO(&wrqu, sizeof(wrqu)); -+ wrqu.data.length = strlen(buf); -+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -+ } -+ -+#ifdef USER_KEYS -+ if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN && -+ ar->user_saved_keys.keyOk == TRUE) -+ { -+ -+ key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC; -+ if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) { -+ key_op_ctrl &= ~KEY_OP_INIT_RSC; -+ } else { -+ key_op_ctrl |= KEY_OP_INIT_RSC; -+ } -+ ar6000_reinstall_keys(ar, key_op_ctrl); -+ } -+#endif /* USER_KEYS */ -+ -+ /* flush data queues */ -+ ar6000_TxDataCleanup(ar); -+ -+ netif_wake_queue(ar->arNetDev); -+ -+ if ((OPEN_AUTH == ar->arDot11AuthMode) && -+ (NONE_AUTH == ar->arAuthMode) && -+ (WEP_CRYPT == ar->arPairwiseCrypto)) -+ { -+ if (!ar->arConnected) { -+ ar6000_install_static_wep_keys(ar); -+ } -+ } -+ -+ ar->arConnected = TRUE; -+ ar->arConnectPending = FALSE; -+ -+ reconnect_flag = 0; -+ -+ A_MEMZERO(&wrqu, sizeof(wrqu)); -+ A_MEMCPY(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN); -+ wrqu.addr.sa_family = ARPHRD_ETHER; -+ wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL); -+ if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) { -+ A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap)); -+ ar->arNodeNum = 0; -+ ar->arNexEpId = ENDPOINT_2; -+ } -+ -+} -+ -+void ar6000_set_numdataendpts(AR_SOFTC_T *ar, A_UINT32 num) -+{ -+ A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1)); -+ ar->arNumDataEndPts = num; -+} -+ -+void -+ar6000_disconnect_event(AR_SOFTC_T *ar, A_UINT8 reason, A_UINT8 *bssid, -+ A_UINT8 assocRespLen, A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus) -+{ -+ A_UINT8 i; -+ -+ A_PRINTF("AR6000 disconnected"); -+ if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) { -+ A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", -+ bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]); -+ } -+ A_PRINTF("\n"); -+ -+ AR_DEBUG_PRINTF("\nDisconnect Reason is %d", reason); -+ AR_DEBUG_PRINTF("\nProtocol Reason/Status Code is %d", protocolReasonStatus); -+ AR_DEBUG_PRINTF("\nAssocResp Frame = %s", -+ assocRespLen ? " " : "NULL"); -+ for (i = 0; i < assocRespLen; i++) { -+ if (!(i % 0x10)) { -+ AR_DEBUG_PRINTF("\n"); -+ } -+ AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]); -+ } -+ AR_DEBUG_PRINTF("\n"); -+ /* -+ * If the event is due to disconnect cmd from the host, only they the target -+ * would stop trying to connect. Under any other condition, target would -+ * keep trying to connect. -+ * -+ */ -+ if( reason == DISCONNECT_CMD) -+ { -+ ar->arConnectPending = FALSE; -+ } else { -+ ar->arConnectPending = TRUE; -+ if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) || -+ ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) { -+ ar->arConnected = TRUE; -+ return; -+ } -+ } -+ ar->arConnected = FALSE; -+ -+ if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) { -+ reconnect_flag = 0; -+ } -+ -+#ifdef USER_KEYS -+ if (reason != CSERV_DISCONNECT) -+ { -+ ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; -+ ar->user_key_ctrl = 0; -+ } -+#endif /* USER_KEYS */ -+ -+ netif_stop_queue(ar->arNetDev); -+ A_MEMZERO(ar->arBssid, sizeof(ar->arBssid)); -+ ar->arBssChannel = 0; -+ ar->arBeaconInterval = 0; -+ -+ ar6000_TxDataCleanup(ar); -+} -+ -+void -+ar6000_regDomain_event(AR_SOFTC_T *ar, A_UINT32 regCode) -+{ -+ A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode); -+ ar->arRegCode = regCode; -+} -+ -+void -+ar6000_neighborReport_event(AR_SOFTC_T *ar, int numAps, WMI_NEIGHBOR_INFO *info) -+{ -+ static const char *tag = "PRE-AUTH"; -+ char buf[128]; -+ union iwreq_data wrqu; -+ int i; -+ -+ AR_DEBUG_PRINTF("AR6000 Neighbor Report Event\n"); -+ for (i=0; i < numAps; info++, i++) { -+ AR_DEBUG_PRINTF("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", -+ info->bssid[0], info->bssid[1], info->bssid[2], -+ info->bssid[3], info->bssid[4], info->bssid[5]); -+ if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) { -+ AR_DEBUG_PRINTF("preauth-cap"); -+ } -+ if (info->bssFlags & WMI_PMKID_VALID_BSS) { -+ AR_DEBUG_PRINTF(" pmkid-valid\n"); -+ continue; /* we skip bss if the pmkid is already valid */ -+ } -+ AR_DEBUG_PRINTF("\n"); -+ snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x", -+ tag, -+ info->bssid[0], info->bssid[1], info->bssid[2], -+ info->bssid[3], info->bssid[4], info->bssid[5], -+ i, info->bssFlags); -+ A_MEMZERO(&wrqu, sizeof(wrqu)); -+ wrqu.data.length = strlen(buf); -+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -+ } -+} -+ -+void -+ar6000_tkip_micerr_event(AR_SOFTC_T *ar, A_UINT8 keyid, A_BOOL ismcast) -+{ -+ static const char *tag = "MLME-MICHAELMICFAILURE.indication"; -+ char buf[128]; -+ union iwreq_data wrqu; -+ -+ A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n", -+ keyid, ismcast ? "multi": "uni"); -+ snprintf(buf, sizeof(buf), "%s(keyid=%d %scat)", tag, keyid, -+ ismcast ? "multi" : "uni"); -+ memset(&wrqu, 0, sizeof(wrqu)); -+ wrqu.data.length = strlen(buf); -+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -+} -+ -+void -+ar6000_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status) -+{ -+ AR_DEBUG_PRINTF("AR6000 scan complete: %d\n", status); -+ -+ ar->scan_complete = 1; -+ wake_up_interruptible(&ar6000_scan_queue); -+} -+ -+void -+ar6000_targetStats_event(AR_SOFTC_T *ar, WMI_TARGET_STATS *pTarget) -+{ -+ TARGET_STATS *pStats = &ar->arTargetStats; -+ A_UINT8 ac; -+ -+ /*A_PRINTF("AR6000 updating target stats\n");*/ -+ pStats->tx_packets += pTarget->txrxStats.tx_stats.tx_packets; -+ pStats->tx_bytes += pTarget->txrxStats.tx_stats.tx_bytes; -+ pStats->tx_unicast_pkts += pTarget->txrxStats.tx_stats.tx_unicast_pkts; -+ pStats->tx_unicast_bytes += pTarget->txrxStats.tx_stats.tx_unicast_bytes; -+ pStats->tx_multicast_pkts += pTarget->txrxStats.tx_stats.tx_multicast_pkts; -+ pStats->tx_multicast_bytes += pTarget->txrxStats.tx_stats.tx_multicast_bytes; -+ pStats->tx_broadcast_pkts += pTarget->txrxStats.tx_stats.tx_broadcast_pkts; -+ pStats->tx_broadcast_bytes += pTarget->txrxStats.tx_stats.tx_broadcast_bytes; -+ pStats->tx_rts_success_cnt += pTarget->txrxStats.tx_stats.tx_rts_success_cnt; -+ for(ac = 0; ac < WMM_NUM_AC; ac++) -+ pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac]; -+ pStats->tx_errors += pTarget->txrxStats.tx_stats.tx_errors; -+ pStats->tx_failed_cnt += pTarget->txrxStats.tx_stats.tx_failed_cnt; -+ pStats->tx_retry_cnt += pTarget->txrxStats.tx_stats.tx_retry_cnt; -+ pStats->tx_rts_fail_cnt += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt; -+ pStats->tx_unicast_rate = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate); -+ -+ pStats->rx_packets += pTarget->txrxStats.rx_stats.rx_packets; -+ pStats->rx_bytes += pTarget->txrxStats.rx_stats.rx_bytes; -+ pStats->rx_unicast_pkts += pTarget->txrxStats.rx_stats.rx_unicast_pkts; -+ pStats->rx_unicast_bytes += pTarget->txrxStats.rx_stats.rx_unicast_bytes; -+ pStats->rx_multicast_pkts += pTarget->txrxStats.rx_stats.rx_multicast_pkts; -+ pStats->rx_multicast_bytes += pTarget->txrxStats.rx_stats.rx_multicast_bytes; -+ pStats->rx_broadcast_pkts += pTarget->txrxStats.rx_stats.rx_broadcast_pkts; -+ pStats->rx_broadcast_bytes += pTarget->txrxStats.rx_stats.rx_broadcast_bytes; -+ pStats->rx_fragment_pkt += pTarget->txrxStats.rx_stats.rx_fragment_pkt; -+ pStats->rx_errors += pTarget->txrxStats.rx_stats.rx_errors; -+ pStats->rx_crcerr += pTarget->txrxStats.rx_stats.rx_crcerr; -+ pStats->rx_key_cache_miss += pTarget->txrxStats.rx_stats.rx_key_cache_miss; -+ pStats->rx_decrypt_err += pTarget->txrxStats.rx_stats.rx_decrypt_err; -+ pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames; -+ pStats->rx_unicast_rate = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate); -+ -+ -+ pStats->tkip_local_mic_failure -+ += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure; -+ pStats->tkip_counter_measures_invoked -+ += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked; -+ pStats->tkip_replays += pTarget->txrxStats.tkipCcmpStats.tkip_replays; -+ pStats->tkip_format_errors += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors; -+ pStats->ccmp_format_errors += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors; -+ pStats->ccmp_replays += pTarget->txrxStats.tkipCcmpStats.ccmp_replays; -+ -+ -+ pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt; -+ pStats->noise_floor_calibation = pTarget->noise_floor_calibation; -+ -+ pStats->cs_bmiss_cnt += pTarget->cservStats.cs_bmiss_cnt; -+ pStats->cs_lowRssi_cnt += pTarget->cservStats.cs_lowRssi_cnt; -+ pStats->cs_connect_cnt += pTarget->cservStats.cs_connect_cnt; -+ pStats->cs_disconnect_cnt += pTarget->cservStats.cs_disconnect_cnt; -+ pStats->cs_aveBeacon_snr = pTarget->cservStats.cs_aveBeacon_snr; -+ pStats->cs_aveBeacon_rssi = pTarget->cservStats.cs_aveBeacon_rssi; -+ pStats->cs_lastRoam_msec = pTarget->cservStats.cs_lastRoam_msec; -+ pStats->cs_snr = pTarget->cservStats.cs_snr; -+ pStats->cs_rssi = pTarget->cservStats.cs_rssi; -+ -+ pStats->lq_val = pTarget->lqVal; -+ -+ pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped; -+ pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups; -+ pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups; -+ pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded; -+ -+ ar->statsUpdatePending = FALSE; -+ wake_up(&arEvent); -+} -+ -+void -+ar6000_rssiThreshold_event(AR_SOFTC_T *ar, WMI_RSSI_THRESHOLD_VAL newThreshold, A_INT16 rssi) -+{ -+ USER_RSSI_THOLD userRssiThold; -+ -+ userRssiThold.tag = rssi_map[newThreshold].tag; -+ userRssiThold.rssi = rssi; -+ AR_DEBUG2_PRINTF("rssi Threshold range = %d tag = %d rssi = %d\n", newThreshold, userRssiThold.tag, rssi); -+#ifdef SEND_EVENT_TO_APP -+ ar6000_send_event_to_app(ar, WMI_RSSI_THRESHOLD_EVENTID,(A_UINT8 *)&userRssiThold, sizeof(USER_RSSI_THOLD)); -+#endif -+} -+ -+ -+void -+ar6000_hbChallengeResp_event(AR_SOFTC_T *ar, A_UINT32 cookie, A_UINT32 source) -+{ -+ if (source == APP_HB_CHALLENGE) { -+ /* Report it to the app in case it wants a positive acknowledgement */ -+#ifdef SEND_EVENT_TO_APP -+ ar6000_send_event_to_app(ar, WMIX_HB_CHALLENGE_RESP_EVENTID, -+ (A_UINT8 *)&cookie, sizeof(cookie)); -+#endif -+ } else { -+ /* This would ignore the replys that come in after their due time */ -+ if (cookie == ar->arHBChallengeResp.seqNum) { -+ ar->arHBChallengeResp.outstanding = FALSE; -+ } -+ } -+} -+ -+ -+void -+ar6000_reportError_event(AR_SOFTC_T *ar, WMI_TARGET_ERROR_VAL errorVal) -+{ -+ char *errString[] = { -+ [WMI_TARGET_PM_ERR_FAIL] "WMI_TARGET_PM_ERR_FAIL", -+ [WMI_TARGET_KEY_NOT_FOUND] "WMI_TARGET_KEY_NOT_FOUND", -+ [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR", -+ [WMI_TARGET_BMISS] "WMI_TARGET_BMISS", -+ [WMI_PSDISABLE_NODE_JOIN] "WMI_PSDISABLE_NODE_JOIN" -+ }; -+ -+ A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal); -+ -+ /* One error is reported at a time, and errorval is a bitmask */ -+ if(errorVal & (errorVal - 1)) -+ return; -+ -+ A_PRINTF("AR6000 Error type = "); -+ switch(errorVal) -+ { -+ case WMI_TARGET_PM_ERR_FAIL: -+ case WMI_TARGET_KEY_NOT_FOUND: -+ case WMI_TARGET_DECRYPTION_ERR: -+ case WMI_TARGET_BMISS: -+ case WMI_PSDISABLE_NODE_JOIN: -+ A_PRINTF("%s\n", errString[errorVal]); -+ break; -+ default: -+ A_PRINTF("INVALID\n"); -+ break; -+ } -+ -+} -+ -+ -+void -+ar6000_cac_event(AR_SOFTC_T *ar, A_UINT8 ac, A_UINT8 cacIndication, -+ A_UINT8 statusCode, A_UINT8 *tspecSuggestion) -+{ -+ WMM_TSPEC_IE *tspecIe; -+ -+ /* -+ * This is the TSPEC IE suggestion from AP. -+ * Suggestion provided by AP under some error -+ * cases, could be helpful for the host app. -+ * Check documentation. -+ */ -+ tspecIe = (WMM_TSPEC_IE *)tspecSuggestion; -+ -+ /* -+ * What do we do, if we get TSPEC rejection? One thought -+ * that comes to mind is implictly delete the pstream... -+ */ -+ A_PRINTF("AR6000 CAC notification. " -+ "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n", -+ ac, cacIndication, statusCode); -+} -+ -+#define AR6000_PRINT_BSSID(_pBss) do { \ -+ A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\ -+ (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\ -+ (_pBss)[4],(_pBss)[5]); \ -+} while(0) -+ -+void -+ar6000_roam_tbl_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_TBL *pTbl) -+{ -+ A_UINT8 i; -+ -+ A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n", -+ pTbl->numEntries, pTbl->roamMode); -+ for (i= 0; i < pTbl->numEntries; i++) { -+ A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i, -+ pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1], -+ pTbl->bssRoamInfo[i].bssid[2], -+ pTbl->bssRoamInfo[i].bssid[3], -+ pTbl->bssRoamInfo[i].bssid[4], -+ pTbl->bssRoamInfo[i].bssid[5]); -+ A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d" -+ " BIAS %d\n", -+ pTbl->bssRoamInfo[i].rssi, -+ pTbl->bssRoamInfo[i].rssidt, -+ pTbl->bssRoamInfo[i].last_rssi, -+ pTbl->bssRoamInfo[i].util, -+ pTbl->bssRoamInfo[i].roam_util, -+ pTbl->bssRoamInfo[i].bias); -+ } -+} -+ -+void -+ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply) -+{ -+ A_UINT8 i,j; -+ -+ /*Each event now contains exactly one filter, see bug 26613*/ -+ A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num, wow_reply->num_filters); -+ A_PRINTF("wow mode = %s host mode = %s\n", -+ (wow_reply->wow_mode == 0? "disabled":"enabled"), -+ (wow_reply->host_mode == 1 ? "awake":"asleep")); -+ -+ -+ /*If there are no patterns, the reply will only contain generic -+ WoW information. Pattern information will exist only if there are -+ patterns present. Bug 26716*/ -+ -+ /* If this event contains pattern information, display it*/ -+ if (wow_reply->this_filter_num) { -+ i=0; -+ A_PRINTF("id=%d size=%d offset=%d\n", -+ wow_reply->wow_filters[i].wow_filter_id, -+ wow_reply->wow_filters[i].wow_filter_size, -+ wow_reply->wow_filters[i].wow_filter_offset); -+ A_PRINTF("wow pattern = "); -+ for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) { -+ A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]); -+ } -+ -+ A_PRINTF("\nwow mask = "); -+ for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) { -+ A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]); -+ } -+ A_PRINTF("\n"); -+ } -+} -+ -+/* -+ * Report the Roaming related data collected on the target -+ */ -+void -+ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p) -+{ -+ A_PRINTF("Disconnect Data : BSSID: "); -+ AR6000_PRINT_BSSID(p->disassoc_bssid); -+ A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n", -+ p->disassoc_bss_rssi,p->disassoc_time, -+ p->no_txrx_time); -+ A_PRINTF("Connect Data: BSSID: "); -+ AR6000_PRINT_BSSID(p->assoc_bssid); -+ A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n", -+ p->assoc_bss_rssi,p->assoc_time, -+ p->allow_txrx_time); -+ A_PRINTF("Last Data Tx Time (b4 Disassoc) %d "\ -+ "First Data Tx Time (after Assoc) %d\n", -+ p->last_data_txrx_time, p->first_data_txrx_time); -+} -+ -+void -+ar6000_roam_data_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_DATA *p) -+{ -+ switch (p->roamDataType) { -+ case ROAM_DATA_TIME: -+ ar6000_display_roam_time(&p->u.roamTime); -+ break; -+ default: -+ break; -+ } -+} -+ -+void -+ar6000_bssInfo_event_rx(AR_SOFTC_T *ar, A_UINT8 *datap, int len) -+{ -+ struct sk_buff *skb; -+ WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap; -+ -+ -+ if (!ar->arMgmtFilter) { -+ return; -+ } -+ if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) && -+ (bih->frameType != BEACON_FTYPE)) || -+ ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) && -+ (bih->frameType != PROBERESP_FTYPE))) -+ { -+ return; -+ } -+ -+ if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) { -+ -+ A_NETBUF_PUT(skb, len); -+ A_MEMCPY(A_NETBUF_DATA(skb), datap, len); -+ skb->dev = ar->arNetDev; -+ printk("MAC RAW...\n"); -+// skb->mac.raw = A_NETBUF_DATA(skb); -+ skb->ip_summed = CHECKSUM_NONE; -+ skb->pkt_type = PACKET_OTHERHOST; -+ skb->protocol = __constant_htons(0x0019); -+ netif_rx(skb); -+ } -+} -+ -+A_UINT32 wmiSendCmdNum; -+ -+A_STATUS -+ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; -+ A_STATUS status = A_OK; -+ struct ar_cookie *cookie = NULL; -+ int i; -+ -+ /* take lock to protect ar6000_alloc_cookie() */ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ -+ do { -+ -+ AR_DEBUG2_PRINTF("ar_contrstatus = ol_tx: skb=0x%x, len=0x%x, sid=%d\n", -+ (A_UINT32)osbuf, A_NETBUF_LEN(osbuf), streamID); -+ -+ if ((streamID == WMI_CONTROL_PRI) && (ar->arWMIControlEpFull)) { -+ /* control endpoint is full, don't allocate resources, we -+ * are just going to drop this packet */ -+ cookie = NULL; -+ AR_DEBUG_PRINTF(" WMI Control EP full, dropping packet : 0x%X, len:%d \n", -+ (A_UINT32)osbuf, A_NETBUF_LEN(osbuf)); -+ } else { -+ cookie = ar6000_alloc_cookie(ar); -+ } -+ -+ if (cookie == NULL) { -+ status = A_NO_MEMORY; -+ break; -+ } -+ -+ if(logWmiRawMsgs) { -+ A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum); -+ for(i = 0; i < a_netbuf_to_len(osbuf); i++) -+ A_PRINTF("%x ", ((A_UINT8 *)a_netbuf_to_data(osbuf))[i]); -+ A_PRINTF("\n"); -+ } -+ -+ wmiSendCmdNum++; -+ -+ } while (FALSE); -+ -+ if (cookie != NULL) { -+ /* got a structure to send it out on */ -+ ar->arTxPending[streamID]++; -+ -+ if (streamID != WMI_CONTROL_PRI) { -+ ar->arTotalTxDataPending++; -+ } -+ } -+ -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ -+ if (cookie != NULL) { -+ cookie->arc_bp[0] = (A_UINT32)osbuf; -+ cookie->arc_bp[1] = 0; -+ SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, -+ cookie, -+ A_NETBUF_DATA(osbuf), -+ A_NETBUF_LEN(osbuf), -+ arWMIStream2EndpointID(ar,streamID), -+ AR6K_CONTROL_PKT_TAG); -+ /* this interface is asynchronous, if there is an error, cleanup will happen in the -+ * TX completion callback */ -+ HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); -+ status = A_OK; -+ } -+ -+ return status; -+} -+ -+/* indicate tx activity or inactivity on a WMI stream */ -+void ar6000_indicate_tx_activity(void *devt, A_UINT8 TrafficClass, A_BOOL Active) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; -+ WMI_PRI_STREAM_ID streamid; -+ -+ if (ar->arWmiEnabled) { -+ streamid = wmi_get_stream_id(ar->arWmi, TrafficClass); -+ } else { -+ /* for mbox ping testing, the traffic class is mapped directly as a stream ID, -+ * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c */ -+ streamid = (WMI_PRI_STREAM_ID)TrafficClass; -+ } -+ -+ /* notify HTC, this may cause credit distribution changes */ -+ -+ HTCIndicateActivityChange(ar->arHtcTarget, -+ arWMIStream2EndpointID(ar,streamid), -+ Active); -+ -+} -+ -+module_init(ar6000_init_module); -+module_exit(ar6000_cleanup_module); -+ -+/* Init cookie queue */ -+static void -+ar6000_cookie_init(AR_SOFTC_T *ar) -+{ -+ A_UINT32 i; -+ -+ ar->arCookieList = NULL; -+ A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem)); -+ -+ for (i = 0; i < MAX_COOKIE_NUM; i++) { -+ ar6000_free_cookie(ar, &s_ar_cookie_mem[i]); -+ } -+} -+ -+/* cleanup cookie queue */ -+static void -+ar6000_cookie_cleanup(AR_SOFTC_T *ar) -+{ -+ /* It is gone .... */ -+ ar->arCookieList = NULL; -+} -+ -+/* Init cookie queue */ -+static void -+ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie) -+{ -+ /* Insert first */ -+ A_ASSERT(ar != NULL); -+ A_ASSERT(cookie != NULL); -+ cookie->arc_list_next = ar->arCookieList; -+ ar->arCookieList = cookie; -+} -+ -+/* cleanup cookie queue */ -+static struct ar_cookie * -+ar6000_alloc_cookie(AR_SOFTC_T *ar) -+{ -+ struct ar_cookie *cookie; -+ -+ cookie = ar->arCookieList; -+ if(cookie != NULL) -+ { -+ ar->arCookieList = cookie->arc_list_next; -+ } -+ -+ return cookie; -+} -+ -+#ifdef SEND_EVENT_TO_APP -+/* -+ * This function is used to send event which come from taget to -+ * the application. The buf which send to application is include -+ * the event ID and event content. -+ */ -+#define EVENT_ID_LEN 2 -+void ar6000_send_event_to_app(AR_SOFTC_T *ar, A_UINT16 eventId, -+ A_UINT8 *datap, int len) -+{ -+ -+#if (WIRELESS_EXT >= 15) -+ -+/* note: IWEVCUSTOM only exists in wireless extensions after version 15 */ -+ -+ char *buf; -+ A_UINT16 size; -+ union iwreq_data wrqu; -+ -+ size = len + EVENT_ID_LEN; -+ -+ if (size > IW_CUSTOM_MAX) { -+ AR_DEBUG_PRINTF("WMI event ID : 0x%4.4X, len = %d too big for IWEVCUSTOM (max=%d) \n", -+ eventId, size, IW_CUSTOM_MAX); -+ return; -+ } -+ -+ buf = A_MALLOC_NOWAIT(size); -+ A_MEMZERO(buf, size); -+ A_MEMCPY(buf, &eventId, EVENT_ID_LEN); -+ A_MEMCPY(buf+EVENT_ID_LEN, datap, len); -+ -+ //AR_DEBUG_PRINTF("event ID = %d,len = %d\n",*(A_UINT16*)buf, size); -+ A_MEMZERO(&wrqu, sizeof(wrqu)); -+ wrqu.data.length = size; -+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -+ -+ A_FREE(buf); -+#endif -+ -+ -+} -+#endif -+ -+ -+void -+ar6000_tx_retry_err_event(void *devt) -+{ -+ AR_DEBUG2_PRINTF("Tx retries reach maximum!\n"); -+} -+ -+void -+ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, A_UINT8 snr) -+{ -+ AR_DEBUG2_PRINTF("snr threshold range %d, snr %d\n", newThreshold, snr); -+} -+ -+void -+ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, A_UINT8 lq) -+{ -+ AR_DEBUG2_PRINTF("lq threshold range %d, lq %d\n", newThreshold, lq); -+} -+ -+ -+ -+A_UINT32 -+a_copy_to_user(void *to, const void *from, A_UINT32 n) -+{ -+ return(copy_to_user(to, from, n)); -+} -+ -+A_UINT32 -+a_copy_from_user(void *to, const void *from, A_UINT32 n) -+{ -+ return(copy_from_user(to, from, n)); -+} -+ -+ -+A_STATUS -+ar6000_get_driver_cfg(struct net_device *dev, -+ A_UINT16 cfgParam, -+ void *result) -+{ -+ -+ A_STATUS ret = 0; -+ -+ switch(cfgParam) -+ { -+ case AR6000_DRIVER_CFG_GET_WLANNODECACHING: -+ *((A_UINT32 *)result) = wlanNodeCaching; -+ break; -+ case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS: -+ *((A_UINT32 *)result) = logWmiRawMsgs; -+ break; -+ default: -+ ret = EINVAL; -+ break; -+ } -+ -+ return ret; -+} -+ -+void -+ar6000_keepalive_rx(void *devt, A_UINT8 configured) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; -+ -+ ar->arKeepaliveConfigured = configured; -+ wake_up(&arEvent); -+} -+ -+void -+ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, WMI_PMKID *pmkidList) -+{ -+ A_UINT8 i, j; -+ -+ A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID); -+ -+ for (i = 0; i < numPMKID; i++) { -+ A_PRINTF("\nPMKID %d ", i); -+ for (j = 0; j < WMI_PMKID_LEN; j++) { -+ A_PRINTF("%2.2x", pmkidList->pmkid[j]); -+ } -+ pmkidList++; -+ } -+} -+ -+#ifdef USER_KEYS -+static A_STATUS -+ -+ar6000_reinstall_keys(AR_SOFTC_T *ar, A_UINT8 key_op_ctrl) -+{ -+ A_STATUS status = A_OK; -+ struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik; -+ struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik; -+ CRYPTO_TYPE keyType = ar->user_saved_keys.keyType; -+ -+ if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) { -+ if (NONE_CRYPT == keyType) { -+ goto _reinstall_keys_out; -+ } -+ -+ if (uik->ik_keylen) { -+ status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix, -+ ar->user_saved_keys.keyType, PAIRWISE_USAGE, -+ uik->ik_keylen, (A_UINT8 *)&uik->ik_keyrsc, -+ uik->ik_keydata, key_op_ctrl, SYNC_BEFORE_WMIFLAG); -+ } -+ -+ } else { -+ status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata); -+ } -+ -+ if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) { -+ if (NONE_CRYPT == keyType) { -+ goto _reinstall_keys_out; -+ } -+ -+ if (bik->ik_keylen) { -+ status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix, -+ ar->user_saved_keys.keyType, GROUP_USAGE, -+ bik->ik_keylen, (A_UINT8 *)&bik->ik_keyrsc, -+ bik->ik_keydata, key_op_ctrl, NO_SYNC_WMIFLAG); -+ } -+ } else { -+ status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata); -+ } -+ -+_reinstall_keys_out: -+ ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; -+ ar->user_key_ctrl = 0; -+ -+ return status; -+} -+#endif /* USER_KEYS */ -+ -+ -+void -+ar6000_dset_open_req( -+ void *context, -+ A_UINT32 id, -+ A_UINT32 targHandle, -+ A_UINT32 targReplyFn, -+ A_UINT32 targReplyArg) -+{ -+} -+ -+void -+ar6000_dset_close( -+ void *context, -+ A_UINT32 access_cookie) -+{ -+ return; -+} -+ -+void -+ar6000_dset_data_req( -+ void *context, -+ A_UINT32 accessCookie, -+ A_UINT32 offset, -+ A_UINT32 length, -+ A_UINT32 targBuf, -+ A_UINT32 targReplyFn, -+ A_UINT32 targReplyArg) -+{ -+} -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ar6000_drv.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ar6000_drv.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,361 @@ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef _AR6000_H_ -+#define _AR6000_H_ -+ -+#include -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "a_types.h" -+#include "a_osapi.h" -+#include "htc_api.h" -+#include "wmi.h" -+#include "a_drv.h" -+#include "bmi.h" -+#include -+#include -+#include -+#include -+#include "gpio_api.h" -+#include "gpio.h" -+#include -+#include -+#include -+#include -+#include "AR6Khwreg.h" -+#include "ar6000_api.h" -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+#include -+#endif -+ -+#include "targaddrs.h" -+#include "dbglog_api.h" -+#include "ar6000_diag.h" -+#include "common_drv.h" -+ -+#ifndef __dev_put -+#define __dev_put(dev) dev_put(dev) -+#endif -+ -+#ifdef USER_KEYS -+ -+#define USER_SAVEDKEYS_STAT_INIT 0 -+#define USER_SAVEDKEYS_STAT_RUN 1 -+ -+// TODO this needs to move into the AR_SOFTC struct -+struct USER_SAVEDKEYS { -+ struct ieee80211req_key ucast_ik; -+ struct ieee80211req_key bcast_ik; -+ CRYPTO_TYPE keyType; -+ A_BOOL keyOk; -+}; -+#endif -+ -+#define DBG_INFO 0x00000001 -+#define DBG_ERROR 0x00000002 -+#define DBG_WARNING 0x00000004 -+#define DBG_SDIO 0x00000008 -+#define DBG_HIF 0x00000010 -+#define DBG_HTC 0x00000020 -+#define DBG_WMI 0x00000040 -+#define DBG_WMI2 0x00000080 -+#define DBG_DRIVER 0x00000100 -+ -+#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING) -+ -+ -+#ifdef DEBUG -+#define AR_DEBUG_PRINTF(args...) if (debugdriver) A_PRINTF(args); -+#define AR_DEBUG2_PRINTF(args...) if (debugdriver >= 2) A_PRINTF(args); -+extern int debugdriver; -+#else -+#define AR_DEBUG_PRINTF(args...) -+#define AR_DEBUG2_PRINTF(args...) -+#endif -+ -+A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); -+A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#define MAX_AR6000 1 -+#define AR6000_MAX_RX_BUFFERS 16 -+#define AR6000_BUFFER_SIZE 1664 -+#define AR6000_TX_TIMEOUT 10 -+#define AR6000_ETH_ADDR_LEN 6 -+#define AR6000_MAX_ENDPOINTS 4 -+#define MAX_NODE_NUM 15 -+#define MAX_COOKIE_NUM 150 -+#define AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT 1 -+#define AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT 1 -+ -+enum { -+ DRV_HB_CHALLENGE = 0, -+ APP_HB_CHALLENGE -+}; -+ -+/* HTC RAW streams */ -+typedef enum _HTC_RAW_STREAM_ID { -+ HTC_RAW_STREAM_NOT_MAPPED = -1, -+ HTC_RAW_STREAM_0 = 0, -+ HTC_RAW_STREAM_1 = 1, -+ HTC_RAW_STREAM_2 = 2, -+ HTC_RAW_STREAM_3 = 3, -+ HTC_RAW_STREAM_NUM_MAX -+} HTC_RAW_STREAM_ID; -+ -+#define RAW_HTC_READ_BUFFERS_NUM 4 -+#define RAW_HTC_WRITE_BUFFERS_NUM 4 -+ -+typedef struct { -+ int currPtr; -+ int length; -+ unsigned char data[AR6000_BUFFER_SIZE]; -+ HTC_PACKET HTCPacket; -+} raw_htc_buffer; -+ -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+/* -+ * add TCMD_MODE besides wmi and bypasswmi -+ * in TCMD_MODE, only few TCMD releated wmi commands -+ * counld be hanlder -+ */ -+enum { -+ AR6000_WMI_MODE = 0, -+ AR6000_BYPASS_MODE, -+ AR6000_TCMD_MODE, -+ AR6000_WLAN_MODE -+}; -+#endif /* CONFIG_HOST_TCMD_SUPPORT */ -+ -+struct ar_wep_key { -+ A_UINT8 arKeyIndex; -+ A_UINT8 arKeyLen; -+ A_UINT8 arKey[64]; -+} ; -+ -+struct ar_node_mapping { -+ A_UINT8 macAddress[6]; -+ A_UINT8 epId; -+ A_UINT8 txPending; -+}; -+ -+struct ar_cookie { -+ A_UINT32 arc_bp[2]; /* Must be first field */ -+ HTC_PACKET HtcPkt; /* HTC packet wrapper */ -+ struct ar_cookie *arc_list_next; -+}; -+ -+struct ar_hb_chlng_resp { -+ A_TIMER timer; -+ A_UINT32 frequency; -+ A_UINT32 seqNum; -+ A_BOOL outstanding; -+ A_UINT8 missCnt; -+ A_UINT8 missThres; -+}; -+ -+typedef struct ar6_softc { -+ struct net_device *arNetDev; /* net_device pointer */ -+ void *arWmi; -+ int arTxPending[WMI_PRI_MAX_COUNT]; -+ int arTotalTxDataPending; -+ A_UINT8 arNumDataEndPts; -+ A_BOOL arWmiEnabled; -+ A_BOOL arWmiReady; -+ A_BOOL arConnected; -+ A_BOOL arRadioSwitch; -+ HTC_HANDLE arHtcTarget; -+ void *arHifDevice; -+ spinlock_t arLock; -+ struct semaphore arSem; -+ int arRxBuffers[WMI_PRI_MAX_COUNT]; -+ int arSsidLen; -+ u_char arSsid[32]; -+ A_UINT8 arNetworkType; -+ A_UINT8 arDot11AuthMode; -+ A_UINT8 arAuthMode; -+ A_UINT8 arPairwiseCrypto; -+ A_UINT8 arPairwiseCryptoLen; -+ A_UINT8 arGroupCrypto; -+ A_UINT8 arGroupCryptoLen; -+ A_UINT8 arDefTxKeyIndex; -+ struct ar_wep_key arWepKeyList[WMI_MAX_KEY_INDEX + 1]; -+ A_UINT8 arBssid[6]; -+ A_UINT8 arReqBssid[6]; -+ A_UINT16 arChannelHint; -+ A_UINT16 arBssChannel; -+ A_UINT16 arListenInterval; -+ struct ar6000_version arVersion; -+ A_UINT32 arTargetType; -+ A_INT8 arRssi; -+ A_UINT8 arTxPwr; -+ A_BOOL arTxPwrSet; -+ A_INT32 arBitRate; -+ struct net_device_stats arNetStats; -+ struct iw_statistics arIwStats; -+ A_INT8 arNumChannels; -+ A_UINT16 arChannelList[32]; -+ A_UINT32 arRegCode; -+ A_BOOL statsUpdatePending; -+ TARGET_STATS arTargetStats; -+ A_INT8 arMaxRetries; -+ A_UINT8 arPhyCapability; -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+ A_UINT8 tcmdRxReport; -+ A_UINT32 tcmdRxTotalPkt; -+ A_INT32 tcmdRxRssi; -+ A_UINT32 tcmdPm; -+ A_UINT32 arTargetMode; -+#endif -+ AR6000_WLAN_STATE arWlanState; -+ struct ar_node_mapping arNodeMap[MAX_NODE_NUM]; -+ A_UINT8 arIbssPsEnable; -+ A_UINT8 arNodeNum; -+ A_UINT8 arNexEpId; -+ struct ar_cookie *arCookieList; -+ A_UINT16 arRateMask; -+ A_UINT8 arSkipScan; -+ A_UINT16 arBeaconInterval; -+ A_BOOL arConnectPending; -+ A_BOOL arWmmEnabled; -+ struct ar_hb_chlng_resp arHBChallengeResp; -+ A_UINT8 arKeepaliveConfigured; -+ A_UINT32 arMgmtFilter; -+ HTC_ENDPOINT_ID arWmi2EpMapping[WMI_PRI_MAX_COUNT]; -+ WMI_PRI_STREAM_ID arEp2WmiMapping[ENDPOINT_MAX]; -+#ifdef HTC_RAW_INTERFACE -+ HTC_ENDPOINT_ID arRaw2EpMapping[HTC_RAW_STREAM_NUM_MAX]; -+ HTC_RAW_STREAM_ID arEp2RawMapping[ENDPOINT_MAX]; -+ struct semaphore raw_htc_read_sem[HTC_RAW_STREAM_NUM_MAX]; -+ struct semaphore raw_htc_write_sem[HTC_RAW_STREAM_NUM_MAX]; -+ wait_queue_head_t raw_htc_read_queue[HTC_RAW_STREAM_NUM_MAX]; -+ wait_queue_head_t raw_htc_write_queue[HTC_RAW_STREAM_NUM_MAX]; -+ raw_htc_buffer raw_htc_read_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_READ_BUFFERS_NUM]; -+ raw_htc_buffer raw_htc_write_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_WRITE_BUFFERS_NUM]; -+ A_BOOL write_buffer_available[HTC_RAW_STREAM_NUM_MAX]; -+ A_BOOL read_buffer_available[HTC_RAW_STREAM_NUM_MAX]; -+#endif -+ A_BOOL arNetQueueStopped; -+ A_BOOL arRawIfInit; -+ int arDeviceIndex; -+ COMMON_CREDIT_STATE_INFO arCreditStateInfo; -+ A_BOOL arWMIControlEpFull; -+ A_BOOL dbgLogFetchInProgress; -+ A_UCHAR log_buffer[DBGLOG_HOST_LOG_BUFFER_SIZE]; -+ A_UINT32 log_cnt; -+ A_UINT32 dbglog_init_done; -+ A_UINT32 arConnectCtrlFlags; -+ A_UINT32 scan_complete; -+#ifdef USER_KEYS -+ A_INT32 user_savedkeys_stat; -+ A_UINT32 user_key_ctrl; -+ struct USER_SAVEDKEYS user_saved_keys; -+#endif -+} AR_SOFTC_T; -+ -+ -+#define arWMIStream2EndpointID(ar,wmi) (ar)->arWmi2EpMapping[(wmi)] -+#define arSetWMIStream2EndpointIDMap(ar,wmi,ep) \ -+{ (ar)->arWmi2EpMapping[(wmi)] = (ep); \ -+ (ar)->arEp2WmiMapping[(ep)] = (wmi); } -+#define arEndpoint2WMIStreamID(ar,ep) (ar)->arEp2WmiMapping[(ep)] -+ -+#define arRawIfEnabled(ar) (ar)->arRawIfInit -+#define arRawStream2EndpointID(ar,raw) (ar)->arRaw2EpMapping[(raw)] -+#define arSetRawStream2EndpointIDMap(ar,raw,ep) \ -+{ (ar)->arRaw2EpMapping[(raw)] = (ep); \ -+ (ar)->arEp2RawMapping[(ep)] = (raw); } -+#define arEndpoint2RawStreamID(ar,ep) (ar)->arEp2RawMapping[(ep)] -+ -+struct ar_giwscan_param { -+ char *current_ev; -+ char *end_buf; -+ A_BOOL firstPass; -+}; -+ -+#define AR6000_STAT_INC(ar, stat) (ar->arNetStats.stat++) -+ -+#define AR6000_SPIN_LOCK(lock, param) do { \ -+ if (irqs_disabled()) { \ -+ AR_DEBUG_PRINTF("IRQs disabled:AR6000_LOCK\n"); \ -+ } \ -+ spin_lock_bh(lock); \ -+} while (0) -+ -+#define AR6000_SPIN_UNLOCK(lock, param) do { \ -+ if (irqs_disabled()) { \ -+ AR_DEBUG_PRINTF("IRQs disabled: AR6000_UNLOCK\n"); \ -+ } \ -+ spin_unlock_bh(lock); \ -+} while (0) -+ -+int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -+int ar6000_ioctl_dispatcher(struct net_device *dev, struct ifreq *rq, int cmd); -+void ar6000_ioctl_iwsetup(struct iw_handler_def *def); -+void ar6000_gpio_init(void); -+void ar6000_init_profile_info(AR_SOFTC_T *ar); -+void ar6000_install_static_wep_keys(AR_SOFTC_T *ar); -+int ar6000_init(struct net_device *dev); -+int ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar); -+A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar); -+ -+#ifdef HTC_RAW_INTERFACE -+ -+#ifndef __user -+#define __user -+#endif -+ -+int ar6000_htc_raw_open(AR_SOFTC_T *ar); -+int ar6000_htc_raw_close(AR_SOFTC_T *ar); -+ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar, -+ HTC_RAW_STREAM_ID StreamID, -+ char __user *buffer, size_t count); -+ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar, -+ HTC_RAW_STREAM_ID StreamID, -+ char __user *buffer, size_t count); -+ -+#endif /* HTC_RAW_INTERFACE */ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _AR6000_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ar6000_raw_if.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ar6000_raw_if.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,439 @@ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "ar6000_drv.h" -+ -+#ifdef HTC_RAW_INTERFACE -+ -+static void -+ar6000_htc_raw_read_cb(void *Context, HTC_PACKET *pPacket) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; -+ raw_htc_buffer *busy; -+ HTC_RAW_STREAM_ID streamID; -+ -+ busy = (raw_htc_buffer *)pPacket->pPktContext; -+ A_ASSERT(busy != NULL); -+ -+ if (pPacket->Status == A_ECANCELED) { -+ /* -+ * HTC provides A_ECANCELED status when it doesn't want to be refilled -+ * (probably due to a shutdown) -+ */ -+ return; -+ } -+ -+ streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint); -+ A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED); -+ -+#ifdef CF -+ if (down_trylock(&ar->raw_htc_read_sem[streamID])) { -+#else -+ if (down_interruptible(&ar->raw_htc_read_sem[streamID])) { -+#endif /* CF */ -+ AR_DEBUG2_PRINTF("Unable to down the semaphore\n"); -+ } -+ -+ A_ASSERT((pPacket->Status != A_OK) || -+ (pPacket->pBuffer == (busy->data + HTC_HEADER_LEN))); -+ -+ busy->length = pPacket->ActualLength + HTC_HEADER_LEN; -+ busy->currPtr = HTC_HEADER_LEN; -+ ar->read_buffer_available[streamID] = TRUE; -+ //AR_DEBUG_PRINTF("raw read cb: 0x%X 0x%X \n", busy->currPtr,busy->length); -+ up(&ar->raw_htc_read_sem[streamID]); -+ -+ /* Signal the waiting process */ -+ AR_DEBUG2_PRINTF("Waking up the StreamID(%d) read process\n", streamID); -+ wake_up_interruptible(&ar->raw_htc_read_queue[streamID]); -+} -+ -+static void -+ar6000_htc_raw_write_cb(void *Context, HTC_PACKET *pPacket) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; -+ raw_htc_buffer *free; -+ HTC_RAW_STREAM_ID streamID; -+ -+ free = (raw_htc_buffer *)pPacket->pPktContext; -+ A_ASSERT(free != NULL); -+ -+ if (pPacket->Status == A_ECANCELED) { -+ /* -+ * HTC provides A_ECANCELED status when it doesn't want to be refilled -+ * (probably due to a shutdown) -+ */ -+ return; -+ } -+ -+ streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint); -+ A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED); -+ -+#ifdef CF -+ if (down_trylock(&ar->raw_htc_write_sem[streamID])) { -+#else -+ if (down_interruptible(&ar->raw_htc_write_sem[streamID])) { -+#endif -+ AR_DEBUG2_PRINTF("Unable to down the semaphore\n"); -+ } -+ -+ A_ASSERT(pPacket->pBuffer == (free->data + HTC_HEADER_LEN)); -+ -+ free->length = 0; -+ ar->write_buffer_available[streamID] = TRUE; -+ up(&ar->raw_htc_write_sem[streamID]); -+ -+ /* Signal the waiting process */ -+ AR_DEBUG2_PRINTF("Waking up the StreamID(%d) write process\n", streamID); -+ wake_up_interruptible(&ar->raw_htc_write_queue[streamID]); -+} -+ -+/* connect to a service */ -+static A_STATUS ar6000_connect_raw_service(AR_SOFTC_T *ar, -+ HTC_RAW_STREAM_ID StreamID) -+{ -+ A_STATUS status; -+ HTC_SERVICE_CONNECT_RESP response; -+ A_UINT8 streamNo; -+ HTC_SERVICE_CONNECT_REQ connect; -+ -+ do { -+ -+ A_MEMZERO(&connect,sizeof(connect)); -+ /* pass the stream ID as meta data to the RAW streams service */ -+ streamNo = (A_UINT8)StreamID; -+ connect.pMetaData = &streamNo; -+ connect.MetaDataLength = sizeof(A_UINT8); -+ /* these fields are the same for all endpoints */ -+ connect.EpCallbacks.pContext = ar; -+ connect.EpCallbacks.EpTxComplete = ar6000_htc_raw_write_cb; -+ connect.EpCallbacks.EpRecv = ar6000_htc_raw_read_cb; -+ /* simple interface, we don't need these optional callbacks */ -+ connect.EpCallbacks.EpRecvRefill = NULL; -+ connect.EpCallbacks.EpSendFull = NULL; -+ connect.MaxSendQueueDepth = RAW_HTC_WRITE_BUFFERS_NUM; -+ -+ /* connect to the raw streams service, we may be able to get 1 or more -+ * connections, depending on WHAT is running on the target */ -+ connect.ServiceID = HTC_RAW_STREAMS_SVC; -+ -+ A_MEMZERO(&response,sizeof(response)); -+ -+ /* try to connect to the raw stream, it is okay if this fails with -+ * status HTC_SERVICE_NO_MORE_EP */ -+ status = HTCConnectService(ar->arHtcTarget, -+ &connect, -+ &response); -+ -+ if (A_FAILED(status)) { -+ if (response.ConnectRespCode == HTC_SERVICE_NO_MORE_EP) { -+ AR_DEBUG_PRINTF("HTC RAW , No more streams allowed \n"); -+ status = A_OK; -+ } -+ break; -+ } -+ -+ /* set endpoint mapping for the RAW HTC streams */ -+ arSetRawStream2EndpointIDMap(ar,StreamID,response.Endpoint); -+ -+ AR_DEBUG_PRINTF("HTC RAW : stream ID: %d, endpoint: %d\n", -+ StreamID, arRawStream2EndpointID(ar,StreamID)); -+ -+ } while (FALSE); -+ -+ return status; -+} -+ -+int ar6000_htc_raw_open(AR_SOFTC_T *ar) -+{ -+ A_STATUS status; -+ int streamID, endPt, count2; -+ raw_htc_buffer *buffer; -+ HTC_SERVICE_ID servicepriority; -+ -+ A_ASSERT(ar->arHtcTarget != NULL); -+ -+ /* wait for target */ -+ status = HTCWaitTarget(ar->arHtcTarget); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF("HTCWaitTarget failed (%d)\n", status); -+ return -ENODEV; -+ } -+ -+ for (endPt = 0; endPt < ENDPOINT_MAX; endPt++) { -+ ar->arEp2RawMapping[endPt] = HTC_RAW_STREAM_NOT_MAPPED; -+ } -+ -+ for (streamID = HTC_RAW_STREAM_0; streamID < HTC_RAW_STREAM_NUM_MAX; streamID++) { -+ /* Initialize the data structures */ -+ init_MUTEX(&ar->raw_htc_read_sem[streamID]); -+ init_MUTEX(&ar->raw_htc_write_sem[streamID]); -+ init_waitqueue_head(&ar->raw_htc_read_queue[streamID]); -+ init_waitqueue_head(&ar->raw_htc_write_queue[streamID]); -+ -+ /* try to connect to the raw service */ -+ status = ar6000_connect_raw_service(ar,streamID); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ if (arRawStream2EndpointID(ar,streamID) == 0) { -+ break; -+ } -+ -+ for (count2 = 0; count2 < RAW_HTC_READ_BUFFERS_NUM; count2 ++) { -+ /* Initialize the receive buffers */ -+ buffer = &ar->raw_htc_write_buffer[streamID][count2]; -+ memset(buffer, 0, sizeof(raw_htc_buffer)); -+ buffer = &ar->raw_htc_read_buffer[streamID][count2]; -+ memset(buffer, 0, sizeof(raw_htc_buffer)); -+ -+ SET_HTC_PACKET_INFO_RX_REFILL(&buffer->HTCPacket, -+ buffer, -+ buffer->data, -+ AR6000_BUFFER_SIZE, -+ arRawStream2EndpointID(ar,streamID)); -+ -+ /* Queue buffers to HTC for receive */ -+ if ((status = HTCAddReceivePkt(ar->arHtcTarget, &buffer->HTCPacket)) != A_OK) -+ { -+ BMIInit(); -+ return -EIO; -+ } -+ } -+ -+ for (count2 = 0; count2 < RAW_HTC_WRITE_BUFFERS_NUM; count2 ++) { -+ /* Initialize the receive buffers */ -+ buffer = &ar->raw_htc_write_buffer[streamID][count2]; -+ memset(buffer, 0, sizeof(raw_htc_buffer)); -+ } -+ -+ ar->read_buffer_available[streamID] = FALSE; -+ ar->write_buffer_available[streamID] = TRUE; -+ } -+ -+ if (A_FAILED(status)) { -+ return -EIO; -+ } -+ -+ AR_DEBUG_PRINTF("HTC RAW, number of streams the target supports: %d \n", streamID); -+ -+ servicepriority = HTC_RAW_STREAMS_SVC; /* only 1 */ -+ -+ /* set callbacks and priority list */ -+ HTCSetCreditDistribution(ar->arHtcTarget, -+ ar, -+ NULL, /* use default */ -+ NULL, /* use default */ -+ &servicepriority, -+ 1); -+ -+ /* Start the HTC component */ -+ if ((status = HTCStart(ar->arHtcTarget)) != A_OK) { -+ BMIInit(); -+ return -EIO; -+ } -+ -+ (ar)->arRawIfInit = TRUE; -+ -+ return 0; -+} -+ -+int ar6000_htc_raw_close(AR_SOFTC_T *ar) -+{ -+ A_PRINTF("ar6000_htc_raw_close called \n"); -+ HTCStop(ar->arHtcTarget); -+ -+ /* reset the device */ -+ ar6000_reset_device(ar->arHifDevice, ar->arTargetType); -+ /* Initialize the BMI component */ -+ BMIInit(); -+ -+ return 0; -+} -+ -+raw_htc_buffer * -+get_filled_buffer(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID) -+{ -+ int count; -+ raw_htc_buffer *busy; -+ -+ /* Check for data */ -+ for (count = 0; count < RAW_HTC_READ_BUFFERS_NUM; count ++) { -+ busy = &ar->raw_htc_read_buffer[StreamID][count]; -+ if (busy->length) { -+ break; -+ } -+ } -+ if (busy->length) { -+ ar->read_buffer_available[StreamID] = TRUE; -+ } else { -+ ar->read_buffer_available[StreamID] = FALSE; -+ } -+ -+ return busy; -+} -+ -+ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID, -+ char __user *buffer, size_t length) -+{ -+ int readPtr; -+ raw_htc_buffer *busy; -+ -+ if (arRawStream2EndpointID(ar,StreamID) == 0) { -+ AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID); -+ return -EFAULT; -+ } -+ -+ if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) { -+ return -ERESTARTSYS; -+ } -+ -+ busy = get_filled_buffer(ar,StreamID); -+ while (!ar->read_buffer_available[StreamID]) { -+ up(&ar->raw_htc_read_sem[StreamID]); -+ -+ /* Wait for the data */ -+ AR_DEBUG2_PRINTF("Sleeping StreamID(%d) read process\n", StreamID); -+ if (wait_event_interruptible(ar->raw_htc_read_queue[StreamID], -+ ar->read_buffer_available[StreamID])) -+ { -+ return -EINTR; -+ } -+ if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) { -+ return -ERESTARTSYS; -+ } -+ busy = get_filled_buffer(ar,StreamID); -+ } -+ -+ /* Read the data */ -+ readPtr = busy->currPtr; -+ if (length > busy->length - HTC_HEADER_LEN) { -+ length = busy->length - HTC_HEADER_LEN; -+ } -+ if (copy_to_user(buffer, &busy->data[readPtr], length)) { -+ up(&ar->raw_htc_read_sem[StreamID]); -+ return -EFAULT; -+ } -+ -+ busy->currPtr += length; -+ -+ //AR_DEBUG_PRINTF("raw read ioctl: currPTR : 0x%X 0x%X \n", busy->currPtr,busy->length); -+ -+ if (busy->currPtr == busy->length) -+ { -+ busy->currPtr = 0; -+ busy->length = 0; -+ HTC_PACKET_RESET_RX(&busy->HTCPacket); -+ //AR_DEBUG_PRINTF("raw read ioctl: ep for packet:%d \n", busy->HTCPacket.Endpoint); -+ HTCAddReceivePkt(ar->arHtcTarget, &busy->HTCPacket); -+ } -+ ar->read_buffer_available[StreamID] = FALSE; -+ up(&ar->raw_htc_read_sem[StreamID]); -+ -+ return length; -+} -+ -+static raw_htc_buffer * -+get_free_buffer(AR_SOFTC_T *ar, HTC_ENDPOINT_ID StreamID) -+{ -+ int count; -+ raw_htc_buffer *free; -+ -+ free = NULL; -+ for (count = 0; count < RAW_HTC_WRITE_BUFFERS_NUM; count ++) { -+ free = &ar->raw_htc_write_buffer[StreamID][count]; -+ if (free->length == 0) { -+ break; -+ } -+ } -+ if (!free->length) { -+ ar->write_buffer_available[StreamID] = TRUE; -+ } else { -+ ar->write_buffer_available[StreamID] = FALSE; -+ } -+ -+ return free; -+} -+ -+ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID, -+ char __user *buffer, size_t length) -+{ -+ int writePtr; -+ raw_htc_buffer *free; -+ -+ if (arRawStream2EndpointID(ar,StreamID) == 0) { -+ AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID); -+ return -EFAULT; -+ } -+ -+ if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) { -+ return -ERESTARTSYS; -+ } -+ -+ /* Search for a free buffer */ -+ free = get_free_buffer(ar,StreamID); -+ -+ /* Check if there is space to write else wait */ -+ while (!ar->write_buffer_available[StreamID]) { -+ up(&ar->raw_htc_write_sem[StreamID]); -+ -+ /* Wait for buffer to become free */ -+ AR_DEBUG2_PRINTF("Sleeping StreamID(%d) write process\n", StreamID); -+ if (wait_event_interruptible(ar->raw_htc_write_queue[StreamID], -+ ar->write_buffer_available[StreamID])) -+ { -+ return -EINTR; -+ } -+ if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) { -+ return -ERESTARTSYS; -+ } -+ free = get_free_buffer(ar,StreamID); -+ } -+ -+ /* Send the data */ -+ writePtr = HTC_HEADER_LEN; -+ if (length > (AR6000_BUFFER_SIZE - HTC_HEADER_LEN)) { -+ length = AR6000_BUFFER_SIZE - HTC_HEADER_LEN; -+ } -+ -+ if (copy_from_user(&free->data[writePtr], buffer, length)) { -+ up(&ar->raw_htc_read_sem[StreamID]); -+ return -EFAULT; -+ } -+ -+ free->length = length; -+ -+ SET_HTC_PACKET_INFO_TX(&free->HTCPacket, -+ free, -+ &free->data[writePtr], -+ length, -+ arRawStream2EndpointID(ar,StreamID), -+ AR6K_DATA_PKT_TAG); -+ -+ HTCSendPkt(ar->arHtcTarget,&free->HTCPacket); -+ -+ ar->write_buffer_available[StreamID] = FALSE; -+ up(&ar->raw_htc_write_sem[StreamID]); -+ -+ return length; -+} -+#endif /* HTC_RAW_INTERFACE */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ar6xapi_linux.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ar6xapi_linux.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,128 @@ -+#ifndef _AR6XAPI_LINUX_H -+#define _AR6XAPI_LINUX_H -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+struct ar6_softc; -+ -+void ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap); -+A_UINT8 ar6000_iptos_to_userPriority(A_UINT8 *pkt); -+A_STATUS ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID); -+void ar6000_connect_event(struct ar6_softc *ar, A_UINT16 channel, -+ A_UINT8 *bssid, A_UINT16 listenInterval, -+ A_UINT16 beaconInterval, NETWORK_TYPE networkType, -+ A_UINT8 beaconIeLen, A_UINT8 assocReqLen, -+ A_UINT8 assocRespLen,A_UINT8 *assocInfo); -+void ar6000_disconnect_event(struct ar6_softc *ar, A_UINT8 reason, -+ A_UINT8 *bssid, A_UINT8 assocRespLen, -+ A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus); -+void ar6000_tkip_micerr_event(struct ar6_softc *ar, A_UINT8 keyid, -+ A_BOOL ismcast); -+void ar6000_bitrate_rx(void *devt, A_INT32 rateKbps); -+void ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList); -+void ar6000_regDomain_event(struct ar6_softc *ar, A_UINT32 regCode); -+void ar6000_txPwr_rx(void *devt, A_UINT8 txPwr); -+void ar6000_keepalive_rx(void *devt, A_UINT8 configured); -+void ar6000_neighborReport_event(struct ar6_softc *ar, int numAps, -+ WMI_NEIGHBOR_INFO *info); -+void ar6000_set_numdataendpts(struct ar6_softc *ar, A_UINT32 num); -+void ar6000_scanComplete_event(struct ar6_softc *ar, A_STATUS status); -+void ar6000_targetStats_event(struct ar6_softc *ar, WMI_TARGET_STATS *pStats); -+void ar6000_rssiThreshold_event(struct ar6_softc *ar, -+ WMI_RSSI_THRESHOLD_VAL newThreshold, -+ A_INT16 rssi); -+void ar6000_reportError_event(struct ar6_softc *, WMI_TARGET_ERROR_VAL errorVal); -+void ar6000_cac_event(struct ar6_softc *ar, A_UINT8 ac, A_UINT8 cac_indication, -+ A_UINT8 statusCode, A_UINT8 *tspecSuggestion); -+void ar6000_hbChallengeResp_event(struct ar6_softc *, A_UINT32 cookie, A_UINT32 source); -+void -+ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl); -+ -+void -+ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p); -+ -+void -+ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, -+ WMI_GET_WOW_LIST_REPLY *wow_reply); -+ -+void ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, -+ WMI_PMKID *pmkidList); -+ -+void ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values); -+void ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value); -+void ar6000_gpio_ack_rx(void); -+ -+void ar6000_dbglog_init_done(struct ar6_softc *ar); -+ -+#ifdef SEND_EVENT_TO_APP -+void ar6000_send_event_to_app(struct ar6_softc *ar, A_UINT16 eventId, A_UINT8 *datap, int len); -+#endif -+ -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+void ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len); -+#endif -+ -+void ar6000_tx_retry_err_event(void *devt); -+ -+void ar6000_snrThresholdEvent_rx(void *devt, -+ WMI_SNR_THRESHOLD_VAL newThreshold, -+ A_UINT8 snr); -+ -+void ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL range, A_UINT8 lqVal); -+ -+ -+void ar6000_ratemask_rx(void *devt, A_UINT16 ratemask); -+ -+A_STATUS ar6000_get_driver_cfg(struct net_device *dev, -+ A_UINT16 cfgParam, -+ void *result); -+void ar6000_bssInfo_event_rx(struct ar6_softc *ar, A_UINT8 *data, int len); -+ -+void ar6000_dbglog_event(struct ar6_softc *ar, A_UINT32 dropped, -+ A_INT8 *buffer, A_UINT32 length); -+ -+int ar6000_dbglog_get_debug_logs(struct ar6_softc *ar); -+ -+void ar6000_indicate_tx_activity(void *devt, A_UINT8 trafficClass, A_BOOL Active); -+ -+void ar6000_dset_open_req(void *devt, -+ A_UINT32 id, -+ A_UINT32 targ_handle, -+ A_UINT32 targ_reply_fn, -+ A_UINT32 targ_reply_arg); -+void ar6000_dset_close(void *devt, A_UINT32 access_cookie); -+void ar6000_dset_data_req(void *devt, -+ A_UINT32 access_cookie, -+ A_UINT32 offset, -+ A_UINT32 length, -+ A_UINT32 targ_buf, -+ A_UINT32 targ_reply_fn, -+ A_UINT32 targ_reply_arg); -+ -+ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/athdrv_linux.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/athdrv_linux.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,993 @@ -+/* -+ * Copyright (c) 2004-2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef _ATHDRV_LINUX_H -+#define _ATHDRV_LINUX_H -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+ -+/* -+ * There are two types of ioctl's here: Standard ioctls and -+ * eXtended ioctls. All extended ioctls (XIOCTL) are multiplexed -+ * off of the single ioctl command, AR6000_IOCTL_EXTENDED. The -+ * arguments for every XIOCTL starts with a 32-bit command word -+ * that is used to select which extended ioctl is in use. After -+ * the command word are command-specific arguments. -+ */ -+ -+/* Linux standard Wireless Extensions, private ioctl interfaces */ -+#define IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0) -+#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1) -+#define IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+2) -+#define IEEE80211_IOCTL_SETWMMPARAMS (SIOCIWFIRSTPRIV+3) -+#define IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+4) -+#define IEEE80211_IOCTL_GETWMMPARAMS (SIOCIWFIRSTPRIV+5) -+#define IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+6) -+#define IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+7) -+//#define IEEE80211_IOCTL_GETOPTIE (SIOCIWFIRSTPRIV+7) -+#define IEEE80211_IOCTL_ADDPMKID (SIOCIWFIRSTPRIV+8) -+//#define IEEE80211_IOCTL_SETAUTHALG (SIOCIWFIRSTPRIV+10) -+#define IEEE80211_IOCTL_LASTONE (SIOCIWFIRSTPRIV+9) -+ -+ -+ -+/* ====WMI Ioctls==== */ -+/* -+ * -+ * Many ioctls simply provide WMI services to application code: -+ * an application makes such an ioctl call with a set of arguments -+ * that are packaged into the corresponding WMI message, and sent -+ * to the Target. -+ */ -+ -+#define AR6000_IOCTL_WMI_GETREV (SIOCIWFIRSTPRIV+10) -+/* -+ * arguments: -+ * ar6000_version *revision -+ */ -+ -+#define AR6000_IOCTL_WMI_SETPWR (SIOCIWFIRSTPRIV+11) -+/* -+ * arguments: -+ * WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h) -+ * uses: WMI_SET_POWER_MODE_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SETSCAN (SIOCIWFIRSTPRIV+12) -+/* -+ * arguments: -+ * WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h) -+ * uses: WMI_SET_SCAN_PARAMS_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SETLISTENINT (SIOCIWFIRSTPRIV+13) -+/* -+ * arguments: -+ * UINT32 listenInterval -+ * uses: WMI_SET_LISTEN_INT_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SETBSSFILTER (SIOCIWFIRSTPRIV+14) -+/* -+ * arguments: -+ * WMI_BSS_FILTER filter (see include/wmi.h) -+ * uses: WMI_SET_BSS_FILTER_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS (SIOCIWFIRSTPRIV+16) -+/* -+ * arguments: -+ * WMI_CHANNEL_PARAMS_CMD chParams -+ * uses: WMI_SET_CHANNEL_PARAMS_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_PROBEDSSID (SIOCIWFIRSTPRIV+17) -+/* -+ * arguments: -+ * WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h) -+ * uses: WMI_SETPROBED_SSID_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_PMPARAMS (SIOCIWFIRSTPRIV+18) -+/* -+ * arguments: -+ * WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h) -+ * uses: WMI_SET_POWER_PARAMS_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_BADAP (SIOCIWFIRSTPRIV+19) -+/* -+ * arguments: -+ * WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h) -+ * uses: WMI_ADD_BAD_AP_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_GET_QOS_QUEUE (SIOCIWFIRSTPRIV+20) -+/* -+ * arguments: -+ * ar6000_queuereq queueRequest (see below) -+ */ -+ -+#define AR6000_IOCTL_WMI_CREATE_QOS (SIOCIWFIRSTPRIV+21) -+/* -+ * arguments: -+ * WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h) -+ * uses: WMI_CREATE_PSTREAM_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_DELETE_QOS (SIOCIWFIRSTPRIV+22) -+/* -+ * arguments: -+ * WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h) -+ * uses: WMI_DELETE_PSTREAM_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD (SIOCIWFIRSTPRIV+23) -+/* -+ * arguments: -+ * WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) -+ * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24) -+/* -+ * arguments: -+ * WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h) -+ * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_GET_TARGET_STATS (SIOCIWFIRSTPRIV+25) -+/* -+ * arguments: -+ * TARGET_STATS *targetStats (see below) -+ * uses: WMI_GET_STATISTICS_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_ASSOC_INFO (SIOCIWFIRSTPRIV+26) -+/* -+ * arguments: -+ * WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd -+ * uses: WMI_SET_ASSOC_INFO_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS (SIOCIWFIRSTPRIV+27) -+/* -+ * arguments: -+ * WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h) -+ * uses: WMI_SET_ACCESS_PARAMS_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_BMISS_TIME (SIOCIWFIRSTPRIV+28) -+/* -+ * arguments: -+ * UINT32 beaconMissTime -+ * uses: WMI_SET_BMISS_TIME_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT (SIOCIWFIRSTPRIV+29) -+/* -+ * arguments: -+ * WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h) -+ * uses: WMI_SET_DISC_TIMEOUT_CMDID -+ */ -+ -+#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS (SIOCIWFIRSTPRIV+30) -+/* -+ * arguments: -+ * WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd -+ * uses: WMI_SET_IBSS_PM_CAPS_CMDID -+ */ -+ -+/* -+ * There is a very small space available for driver-private -+ * wireless ioctls. In order to circumvent this limitation, -+ * we multiplex a bunch of ioctls (XIOCTLs) on top of a -+ * single AR6000_IOCTL_EXTENDED ioctl. -+ */ -+#define AR6000_IOCTL_EXTENDED (SIOCIWFIRSTPRIV+31) -+ -+ -+/* ====BMI Extended Ioctls==== */ -+ -+#define AR6000_XIOCTL_BMI_DONE 1 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_BMI_DONE) -+ * uses: BMI_DONE -+ */ -+ -+#define AR6000_XIOCTL_BMI_READ_MEMORY 2 -+/* -+ * arguments: -+ * union { -+ * struct { -+ * UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY) -+ * UINT32 address -+ * UINT32 length -+ * } -+ * char results[length] -+ * } -+ * uses: BMI_READ_MEMORY -+ */ -+ -+#define AR6000_XIOCTL_BMI_WRITE_MEMORY 3 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY) -+ * UINT32 address -+ * UINT32 length -+ * char data[length] -+ * uses: BMI_WRITE_MEMORY -+ */ -+ -+#define AR6000_XIOCTL_BMI_EXECUTE 4 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE) -+ * UINT32 TargetAddress -+ * UINT32 parameter -+ * uses: BMI_EXECUTE -+ */ -+ -+#define AR6000_XIOCTL_BMI_SET_APP_START 5 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START) -+ * UINT32 TargetAddress -+ * uses: BMI_SET_APP_START -+ */ -+ -+#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER 6 -+/* -+ * arguments: -+ * union { -+ * struct { -+ * UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER) -+ * UINT32 TargetAddress, 32-bit aligned -+ * } -+ * UINT32 result -+ * } -+ * uses: BMI_READ_SOC_REGISTER -+ */ -+ -+#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER 7 -+/* -+ * arguments: -+ * struct { -+ * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER) -+ * UINT32 TargetAddress, 32-bit aligned -+ * UINT32 newValue -+ * } -+ * uses: BMI_WRITE_SOC_REGISTER -+ */ -+ -+#define AR6000_XIOCTL_BMI_TEST 8 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_BMI_TEST) -+ * UINT32 address -+ * UINT32 length -+ * UINT32 count -+ */ -+ -+ -+ -+/* Historical Host-side DataSet support */ -+#define AR6000_XIOCTL_UNUSED9 9 -+#define AR6000_XIOCTL_UNUSED10 10 -+#define AR6000_XIOCTL_UNUSED11 11 -+ -+/* ====Misc Extended Ioctls==== */ -+ -+#define AR6000_XIOCTL_FORCE_TARGET_RESET 12 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET) -+ */ -+ -+ -+#ifdef HTC_RAW_INTERFACE -+/* HTC Raw Interface Ioctls */ -+#define AR6000_XIOCTL_HTC_RAW_OPEN 13 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN) -+ */ -+ -+#define AR6000_XIOCTL_HTC_RAW_CLOSE 14 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE) -+ */ -+ -+#define AR6000_XIOCTL_HTC_RAW_READ 15 -+/* -+ * arguments: -+ * union { -+ * struct { -+ * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ) -+ * UINT32 mailboxID -+ * UINT32 length -+ * } -+ * results[length] -+ * } -+ */ -+ -+#define AR6000_XIOCTL_HTC_RAW_WRITE 16 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE) -+ * UINT32 mailboxID -+ * UINT32 length -+ * char buffer[length] -+ */ -+#endif /* HTC_RAW_INTERFACE */ -+ -+#define AR6000_XIOCTL_CHECK_TARGET_READY 17 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY) -+ */ -+ -+ -+ -+/* ====GPIO (General Purpose I/O) Extended Ioctls==== */ -+ -+#define AR6000_XIOCTL_GPIO_OUTPUT_SET 18 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET) -+ * ar6000_gpio_output_set_cmd_s (see below) -+ * uses: WMIX_GPIO_OUTPUT_SET_CMDID -+ */ -+ -+#define AR6000_XIOCTL_GPIO_INPUT_GET 19 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET) -+ * uses: WMIX_GPIO_INPUT_GET_CMDID -+ */ -+ -+#define AR6000_XIOCTL_GPIO_REGISTER_SET 20 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET) -+ * ar6000_gpio_register_cmd_s (see below) -+ * uses: WMIX_GPIO_REGISTER_SET_CMDID -+ */ -+ -+#define AR6000_XIOCTL_GPIO_REGISTER_GET 21 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET) -+ * ar6000_gpio_register_cmd_s (see below) -+ * uses: WMIX_GPIO_REGISTER_GET_CMDID -+ */ -+ -+#define AR6000_XIOCTL_GPIO_INTR_ACK 22 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK) -+ * ar6000_cpio_intr_ack_cmd_s (see below) -+ * uses: WMIX_GPIO_INTR_ACK_CMDID -+ */ -+ -+#define AR6000_XIOCTL_GPIO_INTR_WAIT 23 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT) -+ */ -+ -+ -+ -+/* ====more wireless commands==== */ -+ -+#define AR6000_XIOCTL_SET_ADHOC_BSSID 24 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID) -+ * WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h) -+ */ -+ -+#define AR6000_XIOCTL_SET_OPT_MODE 25 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE) -+ * WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h) -+ * uses: WMI_SET_OPT_MODE_CMDID -+ */ -+ -+#define AR6000_XIOCTL_OPT_SEND_FRAME 26 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME) -+ * WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h) -+ * uses: WMI_OPT_TX_FRAME_CMDID -+ */ -+ -+#define AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL 27 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL) -+ * WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h) -+ * uses: WMI_SET_BEACON_INT_CMDID -+ */ -+ -+ -+#define IEEE80211_IOCTL_SETAUTHALG 28 -+ -+ -+#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE 29 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE) -+ * WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h) -+ * uses: WMI_SET_VOICE_PKT_SIZE_CMDID -+ */ -+ -+ -+#define AR6000_XIOCTL_SET_MAX_SP 30 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP) -+ * WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h) -+ * uses: WMI_SET_MAX_SP_LEN_CMDID -+ */ -+ -+#define AR6000_XIOCTL_WMI_GET_ROAM_TBL 31 -+ -+#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL 32 -+ -+#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS 33 -+ -+ -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS) -+ * WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h) -+ * WMI_SET_POWERSAVE_TIMERS_CMDID -+ */ -+ -+#define AR6000_XIOCTRL_WMI_GET_POWER_MODE 34 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE) -+ */ -+ -+#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE 35 -+typedef enum { -+ WLAN_DISABLED, -+ WLAN_ENABLED -+} AR6000_WLAN_STATE; -+/* -+ * arguments: -+ * enable/disable -+ */ -+ -+#define AR6000_XIOCTL_WMI_GET_ROAM_DATA 36 -+ -+#define AR6000_XIOCTL_WMI_SETRETRYLIMITS 37 -+/* -+ * arguments: -+ * WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd -+ * uses: WMI_SET_RETRY_LIMITS_CMDID -+ */ -+ -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+/* ====extended commands for radio test ==== */ -+ -+#define AR6000_XIOCTL_TCMD_CONT_TX 38 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX) -+ * WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h) -+ * uses: WMI_TCMD_CONT_TX_CMDID -+ */ -+ -+#define AR6000_XIOCTL_TCMD_CONT_RX 39 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX) -+ * WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h) -+ * uses: WMI_TCMD_CONT_RX_CMDID -+ */ -+ -+#define AR6000_XIOCTL_TCMD_PM 40 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_TCMD_PM) -+ * WMI_TCMD_PM_CMD pmCmd (see include/wmi.h) -+ * uses: WMI_TCMD_PM_CMDID -+ */ -+ -+#endif /* CONFIG_HOST_TCMD_SUPPORT */ -+ -+#define AR6000_XIOCTL_WMI_STARTSCAN 41 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN) -+ * UINT8 scanType -+ * UINT8 scanConnected -+ * A_BOOL forceFgScan -+ * uses: WMI_START_SCAN_CMDID -+ */ -+ -+#define AR6000_XIOCTL_WMI_SETFIXRATES 42 -+ -+#define AR6000_XIOCTL_WMI_GETFIXRATES 43 -+ -+ -+#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD 44 -+/* -+ * arguments: -+ * WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) -+ * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID -+ */ -+ -+#define AR6000_XIOCTL_WMI_CLR_RSSISNR 45 -+/* -+ * arguments: -+ * WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h) -+ * uses: WMI_CLR_RSSISNR_CMDID -+ */ -+ -+#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD 46 -+/* -+ * arguments: -+ * WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) -+ * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID -+ */ -+ -+#define AR6000_XIOCTL_WMI_SET_RTS 47 -+/* -+ * arguments: -+ * WMI_SET_RTS_MODE_CMD (see include/wmi.h) -+ * uses: WMI_SET_RTS_MODE_CMDID -+ */ -+ -+#define AR6000_XIOCTL_WMI_SET_LPREAMBLE 48 -+ -+#define AR6000_XIOCTL_WMI_SET_AUTHMODE 49 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE) -+ * UINT8 mode -+ * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID -+ */ -+ -+#define AR6000_XIOCTL_WMI_SET_REASSOCMODE 50 -+ -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM) -+ * UINT8 mode -+ * uses: WMI_SET_WMM_CMDID -+ */ -+#define AR6000_XIOCTL_WMI_SET_WMM 51 -+ -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS) -+ * UINT32 frequency -+ * UINT8 threshold -+ */ -+#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS 52 -+ -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP) -+ * UINT32 cookie -+ */ -+#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP 53 -+ -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD) -+ * UINT32 regDomain -+ */ -+#define AR6000_XIOCTL_WMI_GET_RD 54 -+ -+#define AR6000_XIOCTL_DIAG_READ 55 -+ -+#define AR6000_XIOCTL_DIAG_WRITE 56 -+ -+/* -+ * arguments cmd (AR6000_XIOCTL_SET_TXOP) -+ * WMI_TXOP_CFG txopEnable -+ */ -+#define AR6000_XIOCTL_WMI_SET_TXOP 57 -+ -+#ifdef USER_KEYS -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS) -+ * UINT32 keyOpCtrl -+ * uses AR6000_USER_SETKEYS_INFO -+ */ -+#define AR6000_XIOCTL_USER_SETKEYS 58 -+#endif /* USER_KEYS */ -+ -+#define AR6000_XIOCTL_WMI_SET_KEEPALIVE 59 -+/* -+ * arguments: -+ * UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE) -+ * UINT8 keepaliveInterval -+ * uses: WMI_SET_KEEPALIVE_CMDID -+ */ -+ -+#define AR6000_XIOCTL_WMI_GET_KEEPALIVE 60 -+/* -+ * arguments: -+ * UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE) -+ * UINT8 keepaliveInterval -+ * A_BOOL configured -+ * uses: WMI_GET_KEEPALIVE_CMDID -+ */ -+ -+/* ====ROM Patching Extended Ioctls==== */ -+ -+#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL 61 -+/* -+ * arguments: -+ * union { -+ * struct { -+ * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL) -+ * UINT32 ROM Address -+ * UINT32 RAM Address -+ * UINT32 number of bytes -+ * UINT32 activate? (0 or 1) -+ * } -+ * A_UINT32 resulting rompatch ID -+ * } -+ * uses: BMI_ROMPATCH_INSTALL -+ */ -+ -+#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL 62 -+/* -+ * arguments: -+ * struct { -+ * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL) -+ * UINT32 rompatch ID -+ * } -+ * uses: BMI_ROMPATCH_UNINSTALL -+ */ -+ -+#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE 63 -+/* -+ * arguments: -+ * struct { -+ * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) -+ * UINT32 rompatch count -+ * UINT32 rompatch IDs[rompatch count] -+ * } -+ * uses: BMI_ROMPATCH_ACTIVATE -+ */ -+ -+#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE 64 -+/* -+ * arguments: -+ * struct { -+ * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE) -+ * UINT32 rompatch count -+ * UINT32 rompatch IDs[rompatch count] -+ * } -+ * uses: BMI_ROMPATCH_DEACTIVATE -+ */ -+ -+#define AR6000_XIOCTL_WMI_SET_APPIE 65 -+/* -+ * arguments: -+ * struct { -+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE) -+ * UINT32 app_frmtype; -+ * UINT32 app_buflen; -+ * UINT8 app_buf[]; -+ * } -+ */ -+#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER 66 -+/* -+ * arguments: -+ * A_UINT32 filter_type; -+ */ -+ -+#define AR6000_XIOCTL_DBGLOG_CFG_MODULE 67 -+ -+#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS 68 -+ -+#define AR6000_XIOCTL_WMI_SET_WSC_STATUS 70 -+/* -+ * arguments: -+ * A_UINT32 wsc_status; -+ * (WSC_REG_INACTIVE or WSC_REG_ACTIVE) -+ */ -+ -+/* -+ * arguments: -+ * struct { -+ * A_UINT8 streamType; -+ * A_UINT8 status; -+ * } -+ * uses: WMI_SET_BT_STATUS_CMDID -+ */ -+#define AR6000_XIOCTL_WMI_SET_BT_STATUS 71 -+ -+/* -+ * arguments: -+ * struct { -+ * A_UINT8 paramType; -+ * union { -+ * A_UINT8 noSCOPkts; -+ * BT_PARAMS_A2DP a2dpParams; -+ * BT_COEX_REGS regs; -+ * }; -+ * } -+ * uses: WMI_SET_BT_PARAM_CMDID -+ */ -+#define AR6000_XIOCTL_WMI_SET_BT_PARAMS 72 -+ -+#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE 73 -+#define AR6000_XIOCTL_WMI_SET_WOW_MODE 74 -+#define AR6000_XIOCTL_WMI_GET_WOW_LIST 75 -+#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN 76 -+#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN 77 -+ -+ -+ -+#define AR6000_XIOCTL_TARGET_INFO 78 -+/* -+ * arguments: -+ * UINT32 cmd (AR6000_XIOCTL_TARGET_INFO) -+ * A_UINT32 TargetVersion (returned) -+ * A_UINT32 TargetType (returned) -+ * (See also bmi_msg.h target_ver and target_type) -+ */ -+ -+#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE 79 -+/* -+ * arguments: -+ * none -+ */ -+ -+#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE 80 -+/* -+ * This ioctl is used to emulate traffic activity -+ * timeouts. Activity/inactivity will trigger the driver -+ * to re-balance credits. -+ * -+ * arguments: -+ * ar6000_traffic_activity_change -+ */ -+ -+#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS 81 -+/* -+ * This ioctl is used to set the connect control flags -+ * -+ * arguments: -+ * A_UINT32 connectCtrlFlags -+ */ -+ -+#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS 82 -+/* -+ * This IOCTL sets any Authentication,Key Management and Protection -+ * related parameters. This is used along with the information set in -+ * Connect Command. -+ * Currently this enables Multiple PMKIDs to an AP. -+ * -+ * arguments: -+ * struct { -+ * A_UINT32 akmpInfo; -+ * } -+ * uses: WMI_SET_AKMP_PARAMS_CMD -+ */ -+ -+#define AR6000_XIOCTL_WMI_GET_PMKID_LIST 83 -+ -+#define AR6000_XIOCTL_WMI_SET_PMKID_LIST 84 -+/* -+ * This IOCTL is used to set a list of PMKIDs. This list of -+ * PMKIDs is used in the [Re]AssocReq Frame. This list is used -+ * only if the MultiPMKID option is enabled via the -+ * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS IOCTL. -+ * -+ * arguments: -+ * struct { -+ * A_UINT32 numPMKID; -+ * WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE]; -+ * } -+ * uses: WMI_SET_PMKIDLIST_CMD -+ */ -+ -+/* Historical DSETPATCH support for INI patches */ -+#define AR6000_XIOCTL_UNUSED90 90 -+ -+ -+ -+/* used by AR6000_IOCTL_WMI_GETREV */ -+struct ar6000_version { -+ A_UINT32 host_ver; -+ A_UINT32 target_ver; -+}; -+ -+/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */ -+struct ar6000_queuereq { -+ A_UINT8 trafficClass; -+ A_UINT16 activeTsids; -+}; -+ -+/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */ -+typedef struct targetStats_t { -+ A_UINT64 tx_packets; -+ A_UINT64 tx_bytes; -+ A_UINT64 tx_unicast_pkts; -+ A_UINT64 tx_unicast_bytes; -+ A_UINT64 tx_multicast_pkts; -+ A_UINT64 tx_multicast_bytes; -+ A_UINT64 tx_broadcast_pkts; -+ A_UINT64 tx_broadcast_bytes; -+ A_UINT64 tx_rts_success_cnt; -+ A_UINT64 tx_packet_per_ac[4]; -+ -+ A_UINT64 tx_errors; -+ A_UINT64 tx_failed_cnt; -+ A_UINT64 tx_retry_cnt; -+ A_UINT64 tx_rts_fail_cnt; -+ A_INT32 tx_unicast_rate; -+ A_UINT64 rx_packets; -+ A_UINT64 rx_bytes; -+ A_UINT64 rx_unicast_pkts; -+ A_UINT64 rx_unicast_bytes; -+ A_UINT64 rx_multicast_pkts; -+ A_UINT64 rx_multicast_bytes; -+ A_UINT64 rx_broadcast_pkts; -+ A_UINT64 rx_broadcast_bytes; -+ A_UINT64 rx_fragment_pkt; -+ -+ A_UINT64 rx_errors; -+ A_UINT64 rx_crcerr; -+ A_UINT64 rx_key_cache_miss; -+ A_UINT64 rx_decrypt_err; -+ A_UINT64 rx_duplicate_frames; -+ A_INT32 rx_unicast_rate; -+ -+ A_UINT64 tkip_local_mic_failure; -+ A_UINT64 tkip_counter_measures_invoked; -+ A_UINT64 tkip_replays; -+ A_UINT64 tkip_format_errors; -+ A_UINT64 ccmp_format_errors; -+ A_UINT64 ccmp_replays; -+ -+ A_UINT64 power_save_failure_cnt; -+ A_INT16 noise_floor_calibation; -+ -+ A_UINT64 cs_bmiss_cnt; -+ A_UINT64 cs_lowRssi_cnt; -+ A_UINT64 cs_connect_cnt; -+ A_UINT64 cs_disconnect_cnt; -+ A_UINT8 cs_aveBeacon_snr; -+ A_INT16 cs_aveBeacon_rssi; -+ A_UINT8 cs_lastRoam_msec; -+ A_UINT8 cs_snr; -+ A_INT16 cs_rssi; -+ -+ A_UINT32 lq_val; -+ -+ A_UINT32 wow_num_pkts_dropped; -+ A_UINT8 wow_num_host_pkt_wakeups; -+ A_UINT8 wow_num_host_event_wakeups; -+ A_UINT16 wow_num_events_discarded; -+ -+}TARGET_STATS; -+ -+typedef struct targetStats_cmd_t { -+ TARGET_STATS targetStats; -+ int clearStats; -+} TARGET_STATS_CMD; -+ -+/* used by AR6000_XIOCTL_USER_SETKEYS */ -+ -+/* -+ * Setting this bit to 1 doesnot initialize the RSC on the firmware -+ */ -+#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL 1 -+#define AR6000_USER_SETKEYS_RSC_UNCHANGED 0x00000002 -+ -+typedef struct { -+ A_UINT32 keyOpCtrl; /* Bit Map of Key Mgmt Ctrl Flags */ -+} AR6000_USER_SETKEYS_INFO; -+ -+ -+/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */ -+struct ar6000_gpio_output_set_cmd_s { -+ A_UINT32 set_mask; -+ A_UINT32 clear_mask; -+ A_UINT32 enable_mask; -+ A_UINT32 disable_mask; -+}; -+ -+/* -+ * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET -+ */ -+struct ar6000_gpio_register_cmd_s { -+ A_UINT32 gpioreg_id; -+ A_UINT32 value; -+}; -+ -+/* used by AR6000_XIOCTL_GPIO_INTR_ACK */ -+struct ar6000_gpio_intr_ack_cmd_s { -+ A_UINT32 ack_mask; -+}; -+ -+/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */ -+struct ar6000_gpio_intr_wait_cmd_s { -+ A_UINT32 intr_mask; -+ A_UINT32 input_values; -+}; -+ -+/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */ -+typedef struct ar6000_dbglog_module_config_s { -+ A_UINT32 valid; -+ A_UINT16 mmask; -+ A_UINT16 tsr; -+ A_BOOL rep; -+ A_UINT16 size; -+} DBGLOG_MODULE_CONFIG; -+ -+typedef struct user_rssi_thold_t { -+ A_INT16 tag; -+ A_INT16 rssi; -+} USER_RSSI_THOLD; -+ -+typedef struct user_rssi_params_t { -+ A_UINT8 weight; -+ A_UINT32 pollTime; -+ USER_RSSI_THOLD tholds[12]; -+} USER_RSSI_PARAMS; -+ -+/* -+ * Host driver may have some config parameters. Typically, these -+ * config params are one time config parameters. These could -+ * correspond to any of the underlying modules. Host driver exposes -+ * an api for the underlying modules to get this config. -+ */ -+#define AR6000_DRIVER_CFG_BASE 0x8000 -+ -+/* Should driver perform wlan node caching? */ -+#define AR6000_DRIVER_CFG_GET_WLANNODECACHING 0x8001 -+/*Should we log raw WMI msgs */ -+#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS 0x8002 -+ -+/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */ -+struct ar6000_diag_window_cmd_s { -+ unsigned int addr; -+ unsigned int value; -+}; -+ -+ -+struct ar6000_traffic_activity_change { -+ A_UINT32 StreamID; /* stream ID to indicate activity change */ -+ A_UINT32 Active; /* active (1) or inactive (0) */ -+}; -+ -+#ifdef __cplusplus -+} -+#endif -+#endif -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/athtypes_linux.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/athtypes_linux.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,47 @@ -+/* -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/athtypes_linux.h#1 $ -+ * -+ * This file contains the definitions of the basic atheros data types. -+ * It is used to map the data types in atheros files to a platform specific -+ * type. -+ * -+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef _ATHTYPES_LINUX_H_ -+#define _ATHTYPES_LINUX_H_ -+ -+#ifdef __KERNEL__ -+#include -+#endif -+ -+typedef int8_t A_INT8; -+typedef int16_t A_INT16; -+typedef int32_t A_INT32; -+typedef int64_t A_INT64; -+ -+typedef u_int8_t A_UINT8; -+typedef u_int16_t A_UINT16; -+typedef u_int32_t A_UINT32; -+typedef u_int64_t A_UINT64; -+ -+typedef int A_BOOL; -+typedef char A_CHAR; -+typedef unsigned char A_UCHAR; -+typedef unsigned long A_ATH_TIMER; -+ -+ -+#endif /* _ATHTYPES_LINUX_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/config_linux.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/config_linux.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,44 @@ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef _CONFIG_LINUX_H_ -+#define _CONFIG_LINUX_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* -+ * Host-side GPIO support is optional. -+ * If run-time access to GPIO pins is not required, then -+ * this should be changed to #undef. -+ */ -+#define CONFIG_HOST_GPIO_SUPPORT -+ -+/* -+ * Host side Test Command support -+ */ -+#define CONFIG_HOST_TCMD_SUPPORT -+ -+#define USE_4BYTE_REGISTER_ACCESS -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/debug_linux.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/debug_linux.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,86 @@ -+/* -+ * Copyright (c) 2004-2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef _DEBUG_LINUX_H_ -+#define _DEBUG_LINUX_H_ -+ -+#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING) -+ -+extern A_UINT32 g_dbg_flags; -+ -+#define DBGFMT "%s() : " -+#define DBGARG __func__ -+#define DBGFN A_PRINTF -+ -+/* ------- Debug related stuff ------- */ -+enum { -+ ATH_DEBUG_SEND = 0x0001, -+ ATH_DEBUG_RECV = 0x0002, -+ ATH_DEBUG_SYNC = 0x0004, -+ ATH_DEBUG_DUMP = 0x0008, -+ ATH_DEBUG_IRQ = 0x0010, -+ ATH_DEBUG_TRC = 0x0020, -+ ATH_DEBUG_WARN = 0x0040, -+ ATH_DEBUG_ERR = 0x0080, -+ ATH_LOG_INF = 0x0100, -+ ATH_DEBUG_BMI = 0x0110, -+ ATH_DEBUG_WMI = 0x0120, -+ ATH_DEBUG_HIF = 0x0140, -+ ATH_DEBUG_HTC = 0x0180, -+ ATH_DEBUG_WLAN = 0x1000, -+ ATH_LOG_ERR = 0x1010, -+ ATH_DEBUG_ANY = 0xFFFF, -+}; -+ -+#ifdef DEBUG -+ -+#define A_DPRINTF(f, a) \ -+ if(g_dbg_flags & (f)) \ -+ { \ -+ DBGFN a ; \ -+ } -+ -+ -+// TODO FIX usage of A_PRINTF! -+#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl)) -+#define AR_DEBUG_PRINTBUF(buffer, length, desc) do { \ -+ if (debughtc & ATH_DEBUG_DUMP) { \ -+ DebugDumpBytes(buffer, length,desc); \ -+ } \ -+} while(0) -+#define PRINTX_ARG(arg...) arg -+#define AR_DEBUG_PRINTF(flags, args) do { \ -+ if (debughtc & (flags)) { \ -+ A_PRINTF(KERN_ALERT PRINTX_ARG args); \ -+ } \ -+} while (0) -+#define AR_DEBUG_ASSERT(test) do { \ -+ if (!(test)) { \ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test)); \ -+ } \ -+} while(0) -+extern int debughtc; -+#else -+#define AR_DEBUG_PRINTF(flags, args) -+#define AR_DEBUG_PRINTBUF(buffer, length, desc) -+#define AR_DEBUG_ASSERT(test) -+#define AR_DEBUG_LVL_CHECK(lvl) 0 -+#define A_DPRINTF(f, a) -+#endif -+ -+#endif /* _DEBUG_LINUX_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ioctl.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/ioctl.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,2540 @@ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "ar6000_drv.h" -+ -+static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; -+static A_UINT8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; -+extern USER_RSSI_THOLD rssi_map[12]; -+extern unsigned int wmitimeout; -+extern A_WAITQUEUE_HEAD arEvent; -+extern int tspecCompliance; -+extern int bmienable; -+extern int bypasswmi; -+ -+static int -+ar6000_ioctl_get_roam_tbl(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if(wmi_get_roam_tbl_cmd(ar->arWmi) != A_OK) { -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int -+ar6000_ioctl_get_roam_data(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ -+ /* currently assume only roam times are required */ -+ if(wmi_get_roam_data_cmd(ar->arWmi, ROAM_DATA_TIME) != A_OK) { -+ return -EIO; -+ } -+ -+ -+ return 0; -+} -+ -+static int -+ar6000_ioctl_set_roam_ctrl(struct net_device *dev, char *userdata) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_SET_ROAM_CTRL_CMD cmd; -+ A_UINT8 size = sizeof(cmd); -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ -+ if (copy_from_user(&cmd, userdata, size)) { -+ return -EFAULT; -+ } -+ -+ if (cmd.roamCtrlType == WMI_SET_HOST_BIAS) { -+ if (cmd.info.bssBiasInfo.numBss > 1) { -+ size += (cmd.info.bssBiasInfo.numBss - 1) * sizeof(WMI_BSS_BIAS); -+ } -+ } -+ -+ if (copy_from_user(&cmd, userdata, size)) { -+ return -EFAULT; -+ } -+ -+ if(wmi_set_roam_ctrl_cmd(ar->arWmi, &cmd, size) != A_OK) { -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int -+ar6000_ioctl_set_powersave_timers(struct net_device *dev, char *userdata) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_POWERSAVE_TIMERS_POLICY_CMD cmd; -+ A_UINT8 size = sizeof(cmd); -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, userdata, size)) { -+ return -EFAULT; -+ } -+ -+ if (copy_from_user(&cmd, userdata, size)) { -+ return -EFAULT; -+ } -+ -+ if(wmi_set_powersave_timers_cmd(ar->arWmi, &cmd, size) != A_OK) { -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int -+ar6000_ioctl_set_wmm(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_SET_WMM_CMD cmd; -+ A_STATUS ret; -+ -+ if ((dev->flags & IFF_UP) != IFF_UP) { -+ return -EIO; -+ } -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1), -+ sizeof(cmd))) -+ { -+ return -EFAULT; -+ } -+ -+ if (cmd.status == WMI_WMM_ENABLED) { -+ ar->arWmmEnabled = TRUE; -+ } else { -+ ar->arWmmEnabled = FALSE; -+ } -+ -+ ret = wmi_set_wmm_cmd(ar->arWmi, cmd.status); -+ -+ switch (ret) { -+ case A_OK: -+ return 0; -+ case A_EBUSY : -+ return -EBUSY; -+ case A_NO_MEMORY: -+ return -ENOMEM; -+ case A_EINVAL: -+ default: -+ return -EFAULT; -+ } -+} -+ -+static int -+ar6000_ioctl_set_txop(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_SET_WMM_TXOP_CMD cmd; -+ A_STATUS ret; -+ -+ if ((dev->flags & IFF_UP) != IFF_UP) { -+ return -EIO; -+ } -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1), -+ sizeof(cmd))) -+ { -+ return -EFAULT; -+ } -+ -+ ret = wmi_set_wmm_txop(ar->arWmi, cmd.txopEnable); -+ -+ switch (ret) { -+ case A_OK: -+ return 0; -+ case A_EBUSY : -+ return -EBUSY; -+ case A_NO_MEMORY: -+ return -ENOMEM; -+ case A_EINVAL: -+ default: -+ return -EFAULT; -+ } -+} -+ -+static int -+ar6000_ioctl_get_rd(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ A_STATUS ret = 0; -+ -+ if ((dev->flags & IFF_UP) != IFF_UP || ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if(copy_to_user((char *)((unsigned int*)rq->ifr_data + 1), -+ &ar->arRegCode, sizeof(ar->arRegCode))) -+ ret = -EFAULT; -+ -+ return ret; -+} -+ -+ -+/* Get power mode command */ -+static int -+ar6000_ioctl_get_power_mode(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_POWER_MODE_CMD power_mode; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ power_mode.powerMode = wmi_get_power_mode_cmd(ar->arWmi); -+ if (copy_to_user(rq->ifr_data, &power_mode, sizeof(WMI_POWER_MODE_CMD))) { -+ ret = -EFAULT; -+ } -+ -+ return ret; -+} -+ -+ -+static int -+ar6000_ioctl_set_channelParams(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_CHANNEL_PARAMS_CMD cmd, *cmdp; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if (cmd.numChannels > 1) { -+ cmdp = A_MALLOC(130); -+ if (copy_from_user(cmdp, rq->ifr_data, -+ sizeof (*cmdp) + -+ ((cmd.numChannels - 1) * sizeof(A_UINT16)))) -+ { -+ kfree(cmdp); -+ return -EFAULT; -+ } -+ } else { -+ cmdp = &cmd; -+ } -+ -+ if ((ar->arPhyCapability == WMI_11G_CAPABILITY) && -+ ((cmdp->phyMode == WMI_11A_MODE) || (cmdp->phyMode == WMI_11AG_MODE))) -+ { -+ ret = -EINVAL; -+ } -+ -+ if (!ret && -+ (wmi_set_channelParams_cmd(ar->arWmi, cmdp->scanParam, cmdp->phyMode, -+ cmdp->numChannels, cmdp->channelList) -+ != A_OK)) -+ { -+ ret = -EIO; -+ } -+ -+ if (cmd.numChannels > 1) { -+ kfree(cmdp); -+ } -+ -+ return ret; -+} -+ -+static int -+ar6000_ioctl_set_snr_threshold(struct net_device *dev, struct ifreq *rq) -+{ -+ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_SNR_THRESHOLD_PARAMS_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if( wmi_set_snr_threshold_params(ar->arWmi, &cmd) != A_OK ) { -+ ret = -EIO; -+ } -+ -+ return ret; -+} -+ -+static int -+ar6000_ioctl_set_rssi_threshold(struct net_device *dev, struct ifreq *rq) -+{ -+#define SWAP_THOLD(thold1, thold2) do { \ -+ USER_RSSI_THOLD tmpThold; \ -+ tmpThold.tag = thold1.tag; \ -+ tmpThold.rssi = thold1.rssi; \ -+ thold1.tag = thold2.tag; \ -+ thold1.rssi = thold2.rssi; \ -+ thold2.tag = tmpThold.tag; \ -+ thold2.rssi = tmpThold.rssi; \ -+} while (0) -+ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_RSSI_THRESHOLD_PARAMS_CMD cmd; -+ USER_RSSI_PARAMS rssiParams; -+ A_INT32 i, j; -+ -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user((char *)&rssiParams, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(USER_RSSI_PARAMS))) { -+ return -EFAULT; -+ } -+ cmd.weight = rssiParams.weight; -+ cmd.pollTime = rssiParams.pollTime; -+ -+ A_MEMCPY(rssi_map, &rssiParams.tholds, sizeof(rssi_map)); -+ /* -+ * only 6 elements, so use bubble sorting, in ascending order -+ */ -+ for (i = 5; i > 0; i--) { -+ for (j = 0; j < i; j++) { /* above tholds */ -+ if (rssi_map[j+1].rssi < rssi_map[j].rssi) { -+ SWAP_THOLD(rssi_map[j+1], rssi_map[j]); -+ } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) { -+ return EFAULT; -+ } -+ } -+ } -+ for (i = 11; i > 6; i--) { -+ for (j = 6; j < i; j++) { /* below tholds */ -+ if (rssi_map[j+1].rssi < rssi_map[j].rssi) { -+ SWAP_THOLD(rssi_map[j+1], rssi_map[j]); -+ } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) { -+ return EFAULT; -+ } -+ } -+ } -+ -+#ifdef DEBUG -+ for (i = 0; i < 12; i++) { -+ AR_DEBUG2_PRINTF("thold[%d].tag: %d, thold[%d].rssi: %d \n", -+ i, rssi_map[i].tag, i, rssi_map[i].rssi); -+ } -+#endif -+ cmd.thresholdAbove1_Val = rssi_map[0].rssi; -+ cmd.thresholdAbove2_Val = rssi_map[1].rssi; -+ cmd.thresholdAbove3_Val = rssi_map[2].rssi; -+ cmd.thresholdAbove4_Val = rssi_map[3].rssi; -+ cmd.thresholdAbove5_Val = rssi_map[4].rssi; -+ cmd.thresholdAbove6_Val = rssi_map[5].rssi; -+ cmd.thresholdBelow1_Val = rssi_map[6].rssi; -+ cmd.thresholdBelow2_Val = rssi_map[7].rssi; -+ cmd.thresholdBelow3_Val = rssi_map[8].rssi; -+ cmd.thresholdBelow4_Val = rssi_map[9].rssi; -+ cmd.thresholdBelow5_Val = rssi_map[10].rssi; -+ cmd.thresholdBelow6_Val = rssi_map[11].rssi; -+ -+ if( wmi_set_rssi_threshold_params(ar->arWmi, &cmd) != A_OK ) { -+ ret = -EIO; -+ } -+ -+ return ret; -+} -+ -+static int -+ar6000_ioctl_set_lq_threshold(struct net_device *dev, struct ifreq *rq) -+{ -+ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_LQ_THRESHOLD_PARAMS_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if( wmi_set_lq_threshold_params(ar->arWmi, &cmd) != A_OK ) { -+ ret = -EIO; -+ } -+ -+ return ret; -+} -+ -+ -+static int -+ar6000_ioctl_set_probedSsid(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_PROBED_SSID_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if (wmi_probedSsid_cmd(ar->arWmi, cmd.entryIndex, cmd.flag, cmd.ssidLength, -+ cmd.ssid) != A_OK) -+ { -+ ret = -EIO; -+ } -+ -+ return ret; -+} -+ -+static int -+ar6000_ioctl_set_badAp(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_ADD_BAD_AP_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if (cmd.badApIndex > WMI_MAX_BAD_AP_INDEX) { -+ return -EIO; -+ } -+ -+ if (A_MEMCMP(cmd.bssid, null_mac, AR6000_ETH_ADDR_LEN) == 0) { -+ /* -+ * This is a delete badAP. -+ */ -+ if (wmi_deleteBadAp_cmd(ar->arWmi, cmd.badApIndex) != A_OK) { -+ ret = -EIO; -+ } -+ } else { -+ if (wmi_addBadAp_cmd(ar->arWmi, cmd.badApIndex, cmd.bssid) != A_OK) { -+ ret = -EIO; -+ } -+ } -+ -+ return ret; -+} -+ -+static int -+ar6000_ioctl_create_qos(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_CREATE_PSTREAM_CMD cmd; -+ A_STATUS ret; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ ret = wmi_verify_tspec_params(&cmd, tspecCompliance); -+ if (ret == A_OK) -+ ret = wmi_create_pstream_cmd(ar->arWmi, &cmd); -+ -+ switch (ret) { -+ case A_OK: -+ return 0; -+ case A_EBUSY : -+ return -EBUSY; -+ case A_NO_MEMORY: -+ return -ENOMEM; -+ case A_EINVAL: -+ default: -+ return -EFAULT; -+ } -+} -+ -+static int -+ar6000_ioctl_delete_qos(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_DELETE_PSTREAM_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ ret = wmi_delete_pstream_cmd(ar->arWmi, cmd.trafficClass, cmd.tsid); -+ -+ switch (ret) { -+ case A_OK: -+ return 0; -+ case A_EBUSY : -+ return -EBUSY; -+ case A_NO_MEMORY: -+ return -ENOMEM; -+ case A_EINVAL: -+ default: -+ return -EFAULT; -+ } -+} -+ -+static int -+ar6000_ioctl_get_qos_queue(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ struct ar6000_queuereq qreq; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if( copy_from_user(&qreq, rq->ifr_data, -+ sizeof(struct ar6000_queuereq))) -+ return -EFAULT; -+ -+ qreq.activeTsids = wmi_get_mapped_qos_queue(ar->arWmi, qreq.trafficClass); -+ -+ if (copy_to_user(rq->ifr_data, &qreq, -+ sizeof(struct ar6000_queuereq))) -+ { -+ ret = -EFAULT; -+ } -+ -+ return ret; -+} -+ -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+static A_STATUS -+ar6000_ioctl_tcmd_get_rx_report(struct net_device *dev, -+ struct ifreq *rq, A_UINT8 *data, A_UINT32 len) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ A_UINT32 buf[2]; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ ar->tcmdRxReport = 0; -+ if (wmi_test_cmd(ar->arWmi, data, len) != A_OK) { -+ up(&ar->arSem); -+ return -EIO; -+ } -+ -+ wait_event_interruptible_timeout(arEvent, ar->tcmdRxReport != 0, wmitimeout * HZ); -+ -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } -+ -+ buf[0] = ar->tcmdRxTotalPkt; -+ buf[1] = ar->tcmdRxRssi; -+ if (!ret && copy_to_user(rq->ifr_data, buf, sizeof(buf))) { -+ ret = -EFAULT; -+ } -+ -+ up(&ar->arSem); -+ -+ return ret; -+} -+ -+void -+ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; -+ TCMD_CONT_RX * rx_rep = (TCMD_CONT_RX *)results; -+ -+ ar->tcmdRxTotalPkt = rx_rep->u.report.totalPkt; -+ ar->tcmdRxRssi = rx_rep->u.report.rssiInDBm; -+ ar->tcmdRxReport = 1; -+ -+ wake_up(&arEvent); -+} -+#endif /* CONFIG_HOST_TCMD_SUPPORT*/ -+ -+static int -+ar6000_ioctl_set_error_report_bitmask(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_TARGET_ERROR_REPORT_BITMASK cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ ret = wmi_set_error_report_bitmask(ar->arWmi, cmd.bitmask); -+ -+ return (ret==0 ? ret : -EINVAL); -+} -+ -+static int -+ar6000_clear_target_stats(struct net_device *dev) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ TARGET_STATS *pStats = &ar->arTargetStats; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ A_MEMZERO(pStats, sizeof(TARGET_STATS)); -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ return ret; -+} -+ -+static int -+ar6000_ioctl_get_target_stats(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ TARGET_STATS_CMD cmd; -+ TARGET_STATS *pStats = &ar->arTargetStats; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ -+ ar->statsUpdatePending = TRUE; -+ -+ if(wmi_get_stats_cmd(ar->arWmi) != A_OK) { -+ up(&ar->arSem); -+ return -EIO; -+ } -+ -+ wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ); -+ -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } -+ -+ if (!ret && copy_to_user(rq->ifr_data, pStats, sizeof(*pStats))) { -+ ret = -EFAULT; -+ } -+ -+ if (cmd.clearStats == 1) { -+ ret = ar6000_clear_target_stats(dev); -+ } -+ -+ up(&ar->arSem); -+ -+ return ret; -+} -+ -+static int -+ar6000_ioctl_set_access_params(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_SET_ACCESS_PARAMS_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if (wmi_set_access_params_cmd(ar->arWmi, cmd.txop, cmd.eCWmin, cmd.eCWmax, -+ cmd.aifsn) == A_OK) -+ { -+ ret = 0; -+ } else { -+ ret = -EINVAL; -+ } -+ -+ return (ret); -+} -+ -+static int -+ar6000_ioctl_set_disconnect_timeout(struct net_device *dev, struct ifreq *rq) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_DISC_TIMEOUT_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if (wmi_disctimeout_cmd(ar->arWmi, cmd.disconnectTimeout) == A_OK) -+ { -+ ret = 0; -+ } else { -+ ret = -EINVAL; -+ } -+ -+ return (ret); -+} -+ -+static int -+ar6000_xioctl_set_voice_pkt_size(struct net_device *dev, char * userdata) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_SET_VOICE_PKT_SIZE_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, userdata, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if (wmi_set_voice_pkt_size_cmd(ar->arWmi, cmd.voicePktSize) == A_OK) -+ { -+ ret = 0; -+ } else { -+ ret = -EINVAL; -+ } -+ -+ -+ return (ret); -+} -+ -+static int -+ar6000_xioctl_set_max_sp_len(struct net_device *dev, char * userdata) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_SET_MAX_SP_LEN_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, userdata, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if (wmi_set_max_sp_len_cmd(ar->arWmi, cmd.maxSPLen) == A_OK) -+ { -+ ret = 0; -+ } else { -+ ret = -EINVAL; -+ } -+ -+ return (ret); -+} -+ -+ -+static int -+ar6000_xioctl_set_bt_status_cmd(struct net_device *dev, char * userdata) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_SET_BT_STATUS_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, userdata, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if (wmi_set_bt_status_cmd(ar->arWmi, cmd.streamType, cmd.status) == A_OK) -+ { -+ ret = 0; -+ } else { -+ ret = -EINVAL; -+ } -+ -+ return (ret); -+} -+ -+static int -+ar6000_xioctl_set_bt_params_cmd(struct net_device *dev, char * userdata) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_SET_BT_PARAMS_CMD cmd; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (copy_from_user(&cmd, userdata, sizeof(cmd))) { -+ return -EFAULT; -+ } -+ -+ if (wmi_set_bt_params_cmd(ar->arWmi, &cmd) == A_OK) -+ { -+ ret = 0; -+ } else { -+ ret = -EINVAL; -+ } -+ -+ return (ret); -+} -+ -+#ifdef CONFIG_HOST_GPIO_SUPPORT -+struct ar6000_gpio_intr_wait_cmd_s gpio_intr_results; -+/* gpio_reg_results and gpio_data_available are protected by arSem */ -+static struct ar6000_gpio_register_cmd_s gpio_reg_results; -+static A_BOOL gpio_data_available; /* Requested GPIO data available */ -+static A_BOOL gpio_intr_available; /* GPIO interrupt info available */ -+static A_BOOL gpio_ack_received; /* GPIO ack was received */ -+ -+/* Host-side initialization for General Purpose I/O support */ -+void ar6000_gpio_init(void) -+{ -+ gpio_intr_available = FALSE; -+ gpio_data_available = FALSE; -+ gpio_ack_received = FALSE; -+} -+ -+/* -+ * Called when a GPIO interrupt is received from the Target. -+ * intr_values shows which GPIO pins have interrupted. -+ * input_values shows a recent value of GPIO pins. -+ */ -+void -+ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values) -+{ -+ gpio_intr_results.intr_mask = intr_mask; -+ gpio_intr_results.input_values = input_values; -+ *((volatile A_BOOL *)&gpio_intr_available) = TRUE; -+ wake_up(&arEvent); -+} -+ -+/* -+ * This is called when a response is received from the Target -+ * for a previous or ar6000_gpio_input_get or ar6000_gpio_register_get -+ * call. -+ */ -+void -+ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value) -+{ -+ gpio_reg_results.gpioreg_id = reg_id; -+ gpio_reg_results.value = value; -+ *((volatile A_BOOL *)&gpio_data_available) = TRUE; -+ wake_up(&arEvent); -+} -+ -+/* -+ * This is called when an acknowledgement is received from the Target -+ * for a previous or ar6000_gpio_output_set or ar6000_gpio_register_set -+ * call. -+ */ -+void -+ar6000_gpio_ack_rx(void) -+{ -+ gpio_ack_received = TRUE; -+ wake_up(&arEvent); -+} -+ -+A_STATUS -+ar6000_gpio_output_set(struct net_device *dev, -+ A_UINT32 set_mask, -+ A_UINT32 clear_mask, -+ A_UINT32 enable_mask, -+ A_UINT32 disable_mask) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ gpio_ack_received = FALSE; -+ return wmi_gpio_output_set(ar->arWmi, -+ set_mask, clear_mask, enable_mask, disable_mask); -+} -+ -+static A_STATUS -+ar6000_gpio_input_get(struct net_device *dev) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ *((volatile A_BOOL *)&gpio_data_available) = FALSE; -+ return wmi_gpio_input_get(ar->arWmi); -+} -+ -+static A_STATUS -+ar6000_gpio_register_set(struct net_device *dev, -+ A_UINT32 gpioreg_id, -+ A_UINT32 value) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ gpio_ack_received = FALSE; -+ return wmi_gpio_register_set(ar->arWmi, gpioreg_id, value); -+} -+ -+static A_STATUS -+ar6000_gpio_register_get(struct net_device *dev, -+ A_UINT32 gpioreg_id) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ *((volatile A_BOOL *)&gpio_data_available) = FALSE; -+ return wmi_gpio_register_get(ar->arWmi, gpioreg_id); -+} -+ -+static A_STATUS -+ar6000_gpio_intr_ack(struct net_device *dev, -+ A_UINT32 ack_mask) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ gpio_intr_available = FALSE; -+ return wmi_gpio_intr_ack(ar->arWmi, ack_mask); -+} -+#endif /* CONFIG_HOST_GPIO_SUPPORT */ -+ -+int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ HIF_DEVICE *hifDevice = ar->arHifDevice; -+ int ret, param, param2; -+ unsigned int address = 0; -+ unsigned int length = 0; -+ unsigned char *buffer; -+ char *userdata; -+ A_UINT32 connectCtrlFlags; -+ -+ -+ static WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0, -+ WMI_SHORTSCANRATIO_DEFAULT, -+ DEFAULT_SCAN_CTRL_FLAGS, -+ 0}; -+ WMI_SET_AKMP_PARAMS_CMD akmpParams; -+ WMI_SET_PMKID_LIST_CMD pmkidInfo; -+ -+ if (cmd == AR6000_IOCTL_EXTENDED) -+ { -+ /* -+ * This allows for many more wireless ioctls than would otherwise -+ * be available. Applications embed the actual ioctl command in -+ * the first word of the parameter block, and use the command -+ * AR6000_IOCTL_EXTENDED_CMD on the ioctl call. -+ */ -+ get_user(cmd, (int *)rq->ifr_data); -+ userdata = (char *)(((unsigned int *)rq->ifr_data)+1); -+ } -+ else -+ { -+ userdata = (char *)rq->ifr_data; -+ } -+ -+ if ((ar->arWlanState == WLAN_DISABLED) && -+ ((cmd != AR6000_XIOCTRL_WMI_SET_WLAN_STATE) && -+ (cmd != AR6000_XIOCTL_DIAG_READ) && -+ (cmd != AR6000_XIOCTL_DIAG_WRITE))) -+ { -+ return -EIO; -+ } -+ -+ ret = 0; -+ switch(cmd) -+ { -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+ case AR6000_XIOCTL_TCMD_CONT_TX: -+ { -+ TCMD_CONT_TX txCmd; -+ -+ if (ar->tcmdPm == TCMD_PM_SLEEP) { -+ A_PRINTF("Can NOT send tx tcmd when target is asleep! \n"); -+ return -EFAULT; -+ } -+ -+ if(copy_from_user(&txCmd, userdata, sizeof(TCMD_CONT_TX))) -+ return -EFAULT; -+ wmi_test_cmd(ar->arWmi,(A_UINT8 *)&txCmd, sizeof(TCMD_CONT_TX)); -+ } -+ break; -+ case AR6000_XIOCTL_TCMD_CONT_RX: -+ { -+ TCMD_CONT_RX rxCmd; -+ -+ if (ar->tcmdPm == TCMD_PM_SLEEP) { -+ A_PRINTF("Can NOT send rx tcmd when target is asleep! \n"); -+ return -EFAULT; -+ } -+ if(copy_from_user(&rxCmd, userdata, sizeof(TCMD_CONT_RX))) -+ return -EFAULT; -+ switch(rxCmd.act) -+ { -+ case TCMD_CONT_RX_PROMIS: -+ case TCMD_CONT_RX_FILTER: -+ case TCMD_CONT_RX_SETMAC: -+ wmi_test_cmd(ar->arWmi,(A_UINT8 *)&rxCmd, -+ sizeof(TCMD_CONT_RX)); -+ break; -+ case TCMD_CONT_RX_REPORT: -+ ar6000_ioctl_tcmd_get_rx_report(dev, rq, -+ (A_UINT8 *)&rxCmd, sizeof(TCMD_CONT_RX)); -+ break; -+ default: -+ A_PRINTF("Unknown Cont Rx mode: %d\n",rxCmd.act); -+ return -EINVAL; -+ } -+ } -+ break; -+ case AR6000_XIOCTL_TCMD_PM: -+ { -+ TCMD_PM pmCmd; -+ -+ if(copy_from_user(&pmCmd, userdata, sizeof(TCMD_PM))) -+ return -EFAULT; -+ ar->tcmdPm = pmCmd.mode; -+ wmi_test_cmd(ar->arWmi, (A_UINT8*)&pmCmd, sizeof(TCMD_PM)); -+ } -+ break; -+#endif /* CONFIG_HOST_TCMD_SUPPORT */ -+ -+ case AR6000_XIOCTL_BMI_DONE: -+ if(bmienable) -+ { -+ ret = ar6000_init(dev); -+ } -+ else -+ { -+ ret = BMIDone(hifDevice); -+ } -+ break; -+ -+ case AR6000_XIOCTL_BMI_READ_MEMORY: -+ get_user(address, (unsigned int *)userdata); -+ get_user(length, (unsigned int *)userdata + 1); -+ AR_DEBUG_PRINTF("Read Memory (address: 0x%x, length: %d)\n", -+ address, length); -+ if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) { -+ A_MEMZERO(buffer, length); -+ ret = BMIReadMemory(hifDevice, address, buffer, length); -+ if (copy_to_user(rq->ifr_data, buffer, length)) { -+ ret = -EFAULT; -+ } -+ A_FREE(buffer); -+ } else { -+ ret = -ENOMEM; -+ } -+ break; -+ -+ case AR6000_XIOCTL_BMI_WRITE_MEMORY: -+ get_user(address, (unsigned int *)userdata); -+ get_user(length, (unsigned int *)userdata + 1); -+ AR_DEBUG_PRINTF("Write Memory (address: 0x%x, length: %d)\n", -+ address, length); -+ if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) { -+ A_MEMZERO(buffer, length); -+ if (copy_from_user(buffer, &userdata[sizeof(address) + -+ sizeof(length)], length)) -+ { -+ ret = -EFAULT; -+ } else { -+ ret = BMIWriteMemory(hifDevice, address, buffer, length); -+ } -+ A_FREE(buffer); -+ } else { -+ ret = -ENOMEM; -+ } -+ break; -+ -+ case AR6000_XIOCTL_BMI_TEST: -+ AR_DEBUG_PRINTF("No longer supported\n"); -+ ret = -EOPNOTSUPP; -+ break; -+ -+ case AR6000_XIOCTL_BMI_EXECUTE: -+ get_user(address, (unsigned int *)userdata); -+ get_user(param, (unsigned int *)userdata + 1); -+ AR_DEBUG_PRINTF("Execute (address: 0x%x, param: %d)\n", -+ address, param); -+ ret = BMIExecute(hifDevice, address, ¶m); -+ put_user(param, (unsigned int *)rq->ifr_data); /* return value */ -+ break; -+ -+ case AR6000_XIOCTL_BMI_SET_APP_START: -+ get_user(address, (unsigned int *)userdata); -+ AR_DEBUG_PRINTF("Set App Start (address: 0x%x)\n", address); -+ ret = BMISetAppStart(hifDevice, address); -+ break; -+ -+ case AR6000_XIOCTL_BMI_READ_SOC_REGISTER: -+ get_user(address, (unsigned int *)userdata); -+ ret = BMIReadSOCRegister(hifDevice, address, ¶m); -+ put_user(param, (unsigned int *)rq->ifr_data); /* return value */ -+ break; -+ -+ case AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER: -+ get_user(address, (unsigned int *)userdata); -+ get_user(param, (unsigned int *)userdata + 1); -+ ret = BMIWriteSOCRegister(hifDevice, address, param); -+ break; -+ -+#ifdef HTC_RAW_INTERFACE -+ case AR6000_XIOCTL_HTC_RAW_OPEN: -+ ret = A_OK; -+ if (!arRawIfEnabled(ar)) { -+ /* make sure block size is set in case the target was reset since last -+ * BMI phase (i.e. flashup downloads) */ -+ ret = ar6000_SetHTCBlockSize(ar); -+ if (A_FAILED(ret)) { -+ break; -+ } -+ /* Terminate the BMI phase */ -+ ret = BMIDone(hifDevice); -+ if (ret == A_OK) { -+ ret = ar6000_htc_raw_open(ar); -+ } -+ } -+ break; -+ -+ case AR6000_XIOCTL_HTC_RAW_CLOSE: -+ if (arRawIfEnabled(ar)) { -+ ret = ar6000_htc_raw_close(ar); -+ arRawIfEnabled(ar) = FALSE; -+ } else { -+ ret = A_ERROR; -+ } -+ break; -+ -+ case AR6000_XIOCTL_HTC_RAW_READ: -+ if (arRawIfEnabled(ar)) { -+ unsigned int streamID; -+ get_user(streamID, (unsigned int *)userdata); -+ get_user(length, (unsigned int *)userdata + 1); -+ buffer = rq->ifr_data + sizeof(length); -+ ret = ar6000_htc_raw_read(ar, (HTC_RAW_STREAM_ID)streamID, -+ buffer, length); -+ put_user(ret, (unsigned int *)rq->ifr_data); -+ } else { -+ ret = A_ERROR; -+ } -+ break; -+ -+ case AR6000_XIOCTL_HTC_RAW_WRITE: -+ if (arRawIfEnabled(ar)) { -+ unsigned int streamID; -+ get_user(streamID, (unsigned int *)userdata); -+ get_user(length, (unsigned int *)userdata + 1); -+ buffer = userdata + sizeof(streamID) + sizeof(length); -+ ret = ar6000_htc_raw_write(ar, (HTC_RAW_STREAM_ID)streamID, -+ buffer, length); -+ put_user(ret, (unsigned int *)rq->ifr_data); -+ } else { -+ ret = A_ERROR; -+ } -+ break; -+#endif /* HTC_RAW_INTERFACE */ -+ -+ case AR6000_IOCTL_WMI_GETREV: -+ { -+ if (copy_to_user(rq->ifr_data, &ar->arVersion, -+ sizeof(ar->arVersion))) -+ { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ case AR6000_IOCTL_WMI_SETPWR: -+ { -+ WMI_POWER_MODE_CMD pwrModeCmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&pwrModeCmd, userdata, -+ sizeof(pwrModeCmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_powermode_cmd(ar->arWmi, pwrModeCmd.powerMode) -+ != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS: -+ { -+ WMI_IBSS_PM_CAPS_CMD ibssPmCaps; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&ibssPmCaps, userdata, -+ sizeof(ibssPmCaps))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_ibsspmcaps_cmd(ar->arWmi, ibssPmCaps.power_saving, ibssPmCaps.ttl, -+ ibssPmCaps.atim_windows, ibssPmCaps.timeout_value) != A_OK) -+ { -+ ret = -EIO; -+ } -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ ar->arIbssPsEnable = ibssPmCaps.power_saving; -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ } -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_PMPARAMS: -+ { -+ WMI_POWER_PARAMS_CMD pmParams; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&pmParams, userdata, -+ sizeof(pmParams))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_pmparams_cmd(ar->arWmi, pmParams.idle_period, -+ pmParams.pspoll_number, -+ pmParams.dtim_policy) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_IOCTL_WMI_SETSCAN: -+ { -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&scParams, userdata, -+ sizeof(scParams))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (CAN_SCAN_IN_CONNECT(scParams.scanCtrlFlags)) { -+ ar->arSkipScan = FALSE; -+ } else { -+ ar->arSkipScan = TRUE; -+ } -+ -+ if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period, -+ scParams.fg_end_period, -+ scParams.bg_period, -+ scParams.minact_chdwell_time, -+ scParams.maxact_chdwell_time, -+ scParams.pas_chdwell_time, -+ scParams.shortScanRatio, -+ scParams.scanCtrlFlags, -+ scParams.max_dfsch_act_time) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_IOCTL_WMI_SETLISTENINT: -+ { -+ WMI_LISTEN_INT_CMD listenCmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&listenCmd, userdata, -+ sizeof(listenCmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_listeninterval_cmd(ar->arWmi, listenCmd.listenInterval, listenCmd.numBeacons) != A_OK) { -+ ret = -EIO; -+ } else { -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ ar->arListenInterval = param; -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ } -+ -+ } -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_BMISS_TIME: -+ { -+ WMI_BMISS_TIME_CMD bmissCmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&bmissCmd, userdata, -+ sizeof(bmissCmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_bmisstime_cmd(ar->arWmi, bmissCmd.bmissTime, bmissCmd.numBeacons) != A_OK) { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_IOCTL_WMI_SETBSSFILTER: -+ { -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else { -+ -+ get_user(param, (unsigned char *)userdata); -+ get_user(param2, (unsigned int *)(userdata + 1)); -+ printk("SETBSSFILTER: filter 0x%x, mask: 0x%x\n", param, param2); -+ if (wmi_bssfilter_cmd(ar->arWmi, param, param2) != A_OK) { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_SNRTHRESHOLD: -+ { -+ ret = ar6000_ioctl_set_snr_threshold(dev, rq); -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD: -+ { -+ ret = ar6000_ioctl_set_rssi_threshold(dev, rq); -+ break; -+ } -+ case AR6000_XIOCTL_WMI_CLR_RSSISNR: -+ { -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } -+ ret = wmi_clr_rssi_snr(ar->arWmi); -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_LQTHRESHOLD: -+ { -+ ret = ar6000_ioctl_set_lq_threshold(dev, rq); -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_LPREAMBLE: -+ { -+ WMI_SET_LPREAMBLE_CMD setLpreambleCmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&setLpreambleCmd, userdata, -+ sizeof(setLpreambleCmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_lpreamble_cmd(ar->arWmi, setLpreambleCmd.status) -+ != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_RTS: -+ { -+ WMI_SET_RTS_CMD rtsCmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&rtsCmd, userdata, -+ sizeof(rtsCmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_rts_cmd(ar->arWmi, rtsCmd.threshold) -+ != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_WMM: -+ { -+ ret = ar6000_ioctl_set_wmm(dev, rq); -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_TXOP: -+ { -+ ret = ar6000_ioctl_set_txop(dev, rq); -+ break; -+ } -+ case AR6000_XIOCTL_WMI_GET_RD: -+ { -+ ret = ar6000_ioctl_get_rd(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_CHANNELPARAMS: -+ { -+ ret = ar6000_ioctl_set_channelParams(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_PROBEDSSID: -+ { -+ ret = ar6000_ioctl_set_probedSsid(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_BADAP: -+ { -+ ret = ar6000_ioctl_set_badAp(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_CREATE_QOS: -+ { -+ ret = ar6000_ioctl_create_qos(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_DELETE_QOS: -+ { -+ ret = ar6000_ioctl_delete_qos(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_GET_QOS_QUEUE: -+ { -+ ret = ar6000_ioctl_get_qos_queue(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_GET_TARGET_STATS: -+ { -+ ret = ar6000_ioctl_get_target_stats(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK: -+ { -+ ret = ar6000_ioctl_set_error_report_bitmask(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_ASSOC_INFO: -+ { -+ WMI_SET_ASSOC_INFO_CMD cmd; -+ A_UINT8 assocInfo[WMI_MAX_ASSOC_INFO_LEN]; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else { -+ get_user(cmd.ieType, userdata); -+ if (cmd.ieType >= WMI_MAX_ASSOC_INFO_TYPE) { -+ ret = -EIO; -+ } else { -+ get_user(cmd.bufferSize, userdata + 1); -+ if (cmd.bufferSize > WMI_MAX_ASSOC_INFO_LEN) { -+ ret = -EFAULT; -+ break; -+ } -+ if (copy_from_user(assocInfo, userdata + 2, -+ cmd.bufferSize)) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_associnfo_cmd(ar->arWmi, cmd.ieType, -+ cmd.bufferSize, -+ assocInfo) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ } -+ } -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_ACCESS_PARAMS: -+ { -+ ret = ar6000_ioctl_set_access_params(dev, rq); -+ break; -+ } -+ case AR6000_IOCTL_WMI_SET_DISC_TIMEOUT: -+ { -+ ret = ar6000_ioctl_set_disconnect_timeout(dev, rq); -+ break; -+ } -+ case AR6000_XIOCTL_FORCE_TARGET_RESET: -+ { -+ if (ar->arHtcTarget) -+ { -+// HTCForceReset(htcTarget); -+ } -+ else -+ { -+ AR_DEBUG_PRINTF("ar6000_ioctl cannot attempt reset.\n"); -+ } -+ break; -+ } -+ case AR6000_XIOCTL_TARGET_INFO: -+ case AR6000_XIOCTL_CHECK_TARGET_READY: /* backwards compatibility */ -+ { -+ /* If we made it to here, then the Target exists and is ready. */ -+ -+ if (cmd == AR6000_XIOCTL_TARGET_INFO) { -+ if (copy_to_user((A_UINT32 *)rq->ifr_data, &ar->arVersion.target_ver, -+ sizeof(ar->arVersion.target_ver))) -+ { -+ ret = -EFAULT; -+ } -+ if (copy_to_user(((A_UINT32 *)rq->ifr_data)+1, &ar->arTargetType, -+ sizeof(ar->arTargetType))) -+ { -+ ret = -EFAULT; -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS: -+ { -+ WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD hbparam; -+ -+ if (copy_from_user(&hbparam, userdata, sizeof(hbparam))) -+ { -+ ret = -EFAULT; -+ } else { -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ /* Start a cyclic timer with the parameters provided. */ -+ if (hbparam.frequency) { -+ ar->arHBChallengeResp.frequency = hbparam.frequency; -+ } -+ if (hbparam.threshold) { -+ ar->arHBChallengeResp.missThres = hbparam.threshold; -+ } -+ -+ /* Delete the pending timer and start a new one */ -+ if (timer_pending(&ar->arHBChallengeResp.timer)) { -+ A_UNTIMEOUT(&ar->arHBChallengeResp.timer); -+ } -+ A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0); -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP: -+ { -+ A_UINT32 cookie; -+ -+ if (copy_from_user(&cookie, userdata, sizeof(cookie))) { -+ return -EFAULT; -+ } -+ -+ /* Send the challenge on the control channel */ -+ if (wmi_get_challenge_resp_cmd(ar->arWmi, cookie, APP_HB_CHALLENGE) != A_OK) { -+ return -EIO; -+ } -+ break; -+ } -+#ifdef USER_KEYS -+ case AR6000_XIOCTL_USER_SETKEYS: -+ { -+ -+ ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_RUN; -+ -+ if (copy_from_user(&ar->user_key_ctrl, userdata, -+ sizeof(ar->user_key_ctrl))) -+ { -+ return -EFAULT; -+ } -+ -+ A_PRINTF("ar6000 USER set key %x\n", ar->user_key_ctrl); -+ break; -+ } -+#endif /* USER_KEYS */ -+ -+#ifdef CONFIG_HOST_GPIO_SUPPORT -+ case AR6000_XIOCTL_GPIO_OUTPUT_SET: -+ { -+ struct ar6000_gpio_output_set_cmd_s gpio_output_set_cmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ -+ if (copy_from_user(&gpio_output_set_cmd, userdata, -+ sizeof(gpio_output_set_cmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ ret = ar6000_gpio_output_set(dev, -+ gpio_output_set_cmd.set_mask, -+ gpio_output_set_cmd.clear_mask, -+ gpio_output_set_cmd.enable_mask, -+ gpio_output_set_cmd.disable_mask); -+ if (ret != A_OK) { -+ ret = EIO; -+ } -+ } -+ up(&ar->arSem); -+ break; -+ } -+ case AR6000_XIOCTL_GPIO_INPUT_GET: -+ { -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ -+ ret = ar6000_gpio_input_get(dev); -+ if (ret != A_OK) { -+ up(&ar->arSem); -+ return -EIO; -+ } -+ -+ /* Wait for Target to respond. */ -+ wait_event_interruptible(arEvent, gpio_data_available); -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } else { -+ A_ASSERT(gpio_reg_results.gpioreg_id == GPIO_ID_NONE); -+ -+ if (copy_to_user(userdata, &gpio_reg_results.value, -+ sizeof(gpio_reg_results.value))) -+ { -+ ret = -EFAULT; -+ } -+ } -+ up(&ar->arSem); -+ break; -+ } -+ case AR6000_XIOCTL_GPIO_REGISTER_SET: -+ { -+ struct ar6000_gpio_register_cmd_s gpio_register_cmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ -+ if (copy_from_user(&gpio_register_cmd, userdata, -+ sizeof(gpio_register_cmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ ret = ar6000_gpio_register_set(dev, -+ gpio_register_cmd.gpioreg_id, -+ gpio_register_cmd.value); -+ if (ret != A_OK) { -+ ret = EIO; -+ } -+ -+ /* Wait for acknowledgement from Target */ -+ wait_event_interruptible(arEvent, gpio_ack_received); -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } -+ } -+ up(&ar->arSem); -+ break; -+ } -+ case AR6000_XIOCTL_GPIO_REGISTER_GET: -+ { -+ struct ar6000_gpio_register_cmd_s gpio_register_cmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ -+ if (copy_from_user(&gpio_register_cmd, userdata, -+ sizeof(gpio_register_cmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ ret = ar6000_gpio_register_get(dev, gpio_register_cmd.gpioreg_id); -+ if (ret != A_OK) { -+ up(&ar->arSem); -+ return -EIO; -+ } -+ -+ /* Wait for Target to respond. */ -+ wait_event_interruptible(arEvent, gpio_data_available); -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } else { -+ A_ASSERT(gpio_register_cmd.gpioreg_id == gpio_reg_results.gpioreg_id); -+ if (copy_to_user(userdata, &gpio_reg_results, -+ sizeof(gpio_reg_results))) -+ { -+ ret = -EFAULT; -+ } -+ } -+ } -+ up(&ar->arSem); -+ break; -+ } -+ case AR6000_XIOCTL_GPIO_INTR_ACK: -+ { -+ struct ar6000_gpio_intr_ack_cmd_s gpio_intr_ack_cmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ -+ if (copy_from_user(&gpio_intr_ack_cmd, userdata, -+ sizeof(gpio_intr_ack_cmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ ret = ar6000_gpio_intr_ack(dev, gpio_intr_ack_cmd.ack_mask); -+ if (ret != A_OK) { -+ ret = EIO; -+ } -+ } -+ up(&ar->arSem); -+ break; -+ } -+ case AR6000_XIOCTL_GPIO_INTR_WAIT: -+ { -+ /* Wait for Target to report an interrupt. */ -+ dev_hold(dev); -+ rtnl_unlock(); -+ wait_event_interruptible(arEvent, gpio_intr_available); -+ rtnl_lock(); -+ __dev_put(dev); -+ -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } else { -+ if (copy_to_user(userdata, &gpio_intr_results, -+ sizeof(gpio_intr_results))) -+ { -+ ret = -EFAULT; -+ } -+ } -+ break; -+ } -+#endif /* CONFIG_HOST_GPIO_SUPPORT */ -+ -+ case AR6000_XIOCTL_DBGLOG_CFG_MODULE: -+ { -+ struct ar6000_dbglog_module_config_s config; -+ -+ if (copy_from_user(&config, userdata, sizeof(config))) { -+ return -EFAULT; -+ } -+ -+ /* Send the challenge on the control channel */ -+ if (wmi_config_debug_module_cmd(ar->arWmi, config.mmask, -+ config.tsr, config.rep, -+ config.size, config.valid) != A_OK) -+ { -+ return -EIO; -+ } -+ break; -+ } -+ -+ case AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS: -+ { -+ /* Send the challenge on the control channel */ -+ if (ar6000_dbglog_get_debug_logs(ar) != A_OK) -+ { -+ return -EIO; -+ } -+ break; -+ } -+ -+ case AR6000_XIOCTL_SET_ADHOC_BSSID: -+ { -+ WMI_SET_ADHOC_BSSID_CMD adhocBssid; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&adhocBssid, userdata, -+ sizeof(adhocBssid))) -+ { -+ ret = -EFAULT; -+ } else if (A_MEMCMP(adhocBssid.bssid, bcast_mac, -+ AR6000_ETH_ADDR_LEN) == 0) -+ { -+ ret = -EFAULT; -+ } else { -+ -+ A_MEMCPY(ar->arReqBssid, adhocBssid.bssid, sizeof(ar->arReqBssid)); -+ } -+ break; -+ } -+ -+ case AR6000_XIOCTL_SET_OPT_MODE: -+ { -+ WMI_SET_OPT_MODE_CMD optModeCmd; -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&optModeCmd, userdata, -+ sizeof(optModeCmd))) -+ { -+ ret = -EFAULT; -+ } else if (ar->arConnected && optModeCmd.optMode == SPECIAL_ON) { -+ ret = -EFAULT; -+ -+ } else if (wmi_set_opt_mode_cmd(ar->arWmi, optModeCmd.optMode) -+ != A_OK) -+ { -+ ret = -EIO; -+ } -+ break; -+ } -+ -+ case AR6000_XIOCTL_OPT_SEND_FRAME: -+ { -+ WMI_OPT_TX_FRAME_CMD optTxFrmCmd; -+ A_UINT8 data[MAX_OPT_DATA_LEN]; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&optTxFrmCmd, userdata, -+ sizeof(optTxFrmCmd))) -+ { -+ ret = -EFAULT; -+ } else if (copy_from_user(data, -+ userdata+sizeof(WMI_OPT_TX_FRAME_CMD)-1, -+ optTxFrmCmd.optIEDataLen)) -+ { -+ ret = -EFAULT; -+ } else { -+ ret = wmi_opt_tx_frame_cmd(ar->arWmi, -+ optTxFrmCmd.frmType, -+ optTxFrmCmd.dstAddr, -+ optTxFrmCmd.bssid, -+ optTxFrmCmd.optIEDataLen, -+ data); -+ } -+ -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SETRETRYLIMITS: -+ { -+ WMI_SET_RETRY_LIMITS_CMD setRetryParams; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&setRetryParams, userdata, -+ sizeof(setRetryParams))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_retry_limits_cmd(ar->arWmi, setRetryParams.frameType, -+ setRetryParams.trafficClass, -+ setRetryParams.maxRetries, -+ setRetryParams.enableNotify) != A_OK) -+ { -+ ret = -EIO; -+ } -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ ar->arMaxRetries = setRetryParams.maxRetries; -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ } -+ break; -+ } -+ -+ case AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL: -+ { -+ WMI_BEACON_INT_CMD bIntvlCmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&bIntvlCmd, userdata, -+ sizeof(bIntvlCmd))) -+ { -+ ret = -EFAULT; -+ } else if (wmi_set_adhoc_bconIntvl_cmd(ar->arWmi, bIntvlCmd.beaconInterval) -+ != A_OK) -+ { -+ ret = -EIO; -+ } -+ break; -+ } -+ case IEEE80211_IOCTL_SETAUTHALG: -+ { -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ struct ieee80211req_authalg req; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&req, userdata, -+ sizeof(struct ieee80211req_authalg))) -+ { -+ ret = -EFAULT; -+ } else if (req.auth_alg == AUTH_ALG_OPEN_SYSTEM) { -+ ar->arDot11AuthMode = OPEN_AUTH; -+ ar->arPairwiseCrypto = NONE_CRYPT; -+ ar->arGroupCrypto = NONE_CRYPT; -+ } else if (req.auth_alg == AUTH_ALG_LEAP) { -+ ar->arDot11AuthMode = LEAP_AUTH; -+ } else { -+ ret = -EIO; -+ } -+ break; -+ } -+ -+ case AR6000_XIOCTL_SET_VOICE_PKT_SIZE: -+ ret = ar6000_xioctl_set_voice_pkt_size(dev, userdata); -+ break; -+ -+ case AR6000_XIOCTL_SET_MAX_SP: -+ ret = ar6000_xioctl_set_max_sp_len(dev, userdata); -+ break; -+ -+ case AR6000_XIOCTL_WMI_GET_ROAM_TBL: -+ ret = ar6000_ioctl_get_roam_tbl(dev, rq); -+ break; -+ case AR6000_XIOCTL_WMI_SET_ROAM_CTRL: -+ ret = ar6000_ioctl_set_roam_ctrl(dev, userdata); -+ break; -+ case AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS: -+ ret = ar6000_ioctl_set_powersave_timers(dev, userdata); -+ break; -+ case AR6000_XIOCTRL_WMI_GET_POWER_MODE: -+ ret = ar6000_ioctl_get_power_mode(dev, rq); -+ break; -+ case AR6000_XIOCTRL_WMI_SET_WLAN_STATE: -+ get_user(ar->arWlanState, (unsigned int *)userdata); -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ break; -+ } -+ -+ if (ar->arWlanState == WLAN_ENABLED) { -+ /* Enable foreground scanning */ -+ if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period, -+ scParams.fg_end_period, -+ scParams.bg_period, -+ scParams.minact_chdwell_time, -+ scParams.maxact_chdwell_time, -+ scParams.pas_chdwell_time, -+ scParams.shortScanRatio, -+ scParams.scanCtrlFlags, -+ scParams.max_dfsch_act_time) != A_OK) -+ { -+ ret = -EIO; -+ } -+ if (ar->arSsidLen) { -+ ar->arConnectPending = TRUE; -+ if (wmi_connect_cmd(ar->arWmi, ar->arNetworkType, -+ ar->arDot11AuthMode, ar->arAuthMode, -+ ar->arPairwiseCrypto, -+ ar->arPairwiseCryptoLen, -+ ar->arGroupCrypto, ar->arGroupCryptoLen, -+ ar->arSsidLen, ar->arSsid, -+ ar->arReqBssid, ar->arChannelHint, -+ ar->arConnectCtrlFlags) != A_OK) -+ { -+ ret = -EIO; -+ ar->arConnectPending = FALSE; -+ } -+ } -+ } else { -+ /* Disconnect from the AP and disable foreground scanning */ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) { -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ wmi_disconnect_cmd(ar->arWmi); -+ } else { -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ } -+ -+ if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0xFF, 0) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ case AR6000_XIOCTL_WMI_GET_ROAM_DATA: -+ ret = ar6000_ioctl_get_roam_data(dev, rq); -+ break; -+ case AR6000_XIOCTL_WMI_SET_BT_STATUS: -+ ret = ar6000_xioctl_set_bt_status_cmd(dev, userdata); -+ break; -+ case AR6000_XIOCTL_WMI_SET_BT_PARAMS: -+ ret = ar6000_xioctl_set_bt_params_cmd(dev, userdata); -+ break; -+ case AR6000_XIOCTL_WMI_STARTSCAN: -+ { -+ WMI_START_SCAN_CMD setStartScanCmd; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&setStartScanCmd, userdata, -+ sizeof(setStartScanCmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_startscan_cmd(ar->arWmi, setStartScanCmd.scanType, -+ setStartScanCmd.forceFgScan, -+ setStartScanCmd.isLegacy, -+ setStartScanCmd.homeDwellTime, -+ setStartScanCmd.forceScanInterval) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SETFIXRATES: -+ { -+ WMI_FIX_RATES_CMD setFixRatesCmd; -+ A_STATUS returnStatus; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&setFixRatesCmd, userdata, -+ sizeof(setFixRatesCmd))) -+ { -+ ret = -EFAULT; -+ } else { -+ returnStatus = wmi_set_fixrates_cmd(ar->arWmi, setFixRatesCmd.fixRateMask); -+ if (returnStatus == A_EINVAL) -+ { -+ ret = -EINVAL; -+ } -+ else if(returnStatus != A_OK) { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ -+ case AR6000_XIOCTL_WMI_GETFIXRATES: -+ { -+ WMI_FIX_RATES_CMD getFixRatesCmd; -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ /* Used copy_from_user/copy_to_user to access user space data */ -+ if (copy_from_user(&getFixRatesCmd, userdata, sizeof(getFixRatesCmd))) { -+ ret = -EFAULT; -+ } else { -+ ar->arRateMask = 0xFFFF; -+ -+ if (wmi_get_ratemask_cmd(ar->arWmi) != A_OK) { -+ up(&ar->arSem); -+ return -EIO; -+ } -+ -+ wait_event_interruptible_timeout(arEvent, ar->arRateMask != 0xFFFF, wmitimeout * HZ); -+ -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } -+ -+ if (!ret) { -+ getFixRatesCmd.fixRateMask = ar->arRateMask; -+ } -+ -+ if(copy_to_user(userdata, &getFixRatesCmd, sizeof(getFixRatesCmd))) { -+ ret = -EFAULT; -+ } -+ -+ up(&ar->arSem); -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_AUTHMODE: -+ { -+ WMI_SET_AUTH_MODE_CMD setAuthMode; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&setAuthMode, userdata, -+ sizeof(setAuthMode))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_authmode_cmd(ar->arWmi, setAuthMode.mode) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_REASSOCMODE: -+ { -+ WMI_SET_REASSOC_MODE_CMD setReassocMode; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&setReassocMode, userdata, -+ sizeof(setReassocMode))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_reassocmode_cmd(ar->arWmi, setReassocMode.mode) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_DIAG_READ: -+ { -+ A_UINT32 addr, data; -+ get_user(addr, (unsigned int *)userdata); -+ if (ar6000_ReadRegDiag(ar->arHifDevice, &addr, &data) != A_OK) { -+ ret = -EIO; -+ } -+ put_user(data, (unsigned int *)userdata + 1); -+ break; -+ } -+ case AR6000_XIOCTL_DIAG_WRITE: -+ { -+ A_UINT32 addr, data; -+ get_user(addr, (unsigned int *)userdata); -+ get_user(data, (unsigned int *)userdata + 1); -+ if (ar6000_WriteRegDiag(ar->arHifDevice, &addr, &data) != A_OK) { -+ ret = -EIO; -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_KEEPALIVE: -+ { -+ WMI_SET_KEEPALIVE_CMD setKeepAlive; -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } else if (copy_from_user(&setKeepAlive, userdata, -+ sizeof(setKeepAlive))){ -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_keepalive_cmd(ar->arWmi, setKeepAlive.keepaliveInterval) != A_OK) { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_GET_KEEPALIVE: -+ { -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ WMI_GET_KEEPALIVE_CMD getKeepAlive; -+ int ret = 0; -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ if (copy_from_user(&getKeepAlive, userdata,sizeof(getKeepAlive))) { -+ ret = -EFAULT; -+ } else { -+ getKeepAlive.keepaliveInterval = wmi_get_keepalive_cmd(ar->arWmi); -+ ar->arKeepaliveConfigured = 0xFF; -+ if (wmi_get_keepalive_configured(ar->arWmi) != A_OK){ -+ up(&ar->arSem); -+ return -EIO; -+ } -+ wait_event_interruptible_timeout(arEvent, ar->arKeepaliveConfigured != 0xFF, wmitimeout * HZ); -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } -+ -+ if (!ret) { -+ getKeepAlive.configured = ar->arKeepaliveConfigured; -+ } -+ if (copy_to_user(userdata, &getKeepAlive, sizeof(getKeepAlive))) { -+ ret = -EFAULT; -+ } -+ up(&ar->arSem); -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_APPIE: -+ { -+ WMI_SET_APPIE_CMD appIEcmd; -+ A_UINT8 appIeInfo[IEEE80211_APPIE_FRAME_MAX_LEN]; -+ A_UINT32 fType,ieLen; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ get_user(fType, (A_UINT32 *)userdata); -+ appIEcmd.mgmtFrmType = fType; -+ if (appIEcmd.mgmtFrmType >= IEEE80211_APPIE_NUM_OF_FRAME) { -+ ret = -EIO; -+ } else { -+ get_user(ieLen, (A_UINT32 *)(userdata + 4)); -+ appIEcmd.ieLen = ieLen; -+ if (appIEcmd.ieLen > IEEE80211_APPIE_FRAME_MAX_LEN) { -+ ret = -EIO; -+ break; -+ } -+ if (copy_from_user(appIeInfo, userdata + 8, appIEcmd.ieLen)) { -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_appie_cmd(ar->arWmi, appIEcmd.mgmtFrmType, -+ appIEcmd.ieLen, appIeInfo) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER: -+ { -+ WMI_BSS_FILTER_CMD cmd; -+ A_UINT32 filterType; -+ -+ if (copy_from_user(&filterType, userdata, sizeof(A_UINT32))) -+ { -+ return -EFAULT; -+ } -+ if (filterType & (IEEE80211_FILTER_TYPE_BEACON | -+ IEEE80211_FILTER_TYPE_PROBE_RESP)) -+ { -+ cmd.bssFilter = ALL_BSS_FILTER; -+ } else { -+ cmd.bssFilter = NONE_BSS_FILTER; -+ } -+ if (wmi_bssfilter_cmd(ar->arWmi, cmd.bssFilter, 0) != A_OK) { -+ ret = -EIO; -+ } -+ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ ar->arMgmtFilter = filterType; -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_WSC_STATUS: -+ { -+ A_UINT32 wsc_status; -+ -+ if (copy_from_user(&wsc_status, userdata, sizeof(A_UINT32))) -+ { -+ return -EFAULT; -+ } -+ if (wmi_set_wsc_status_cmd(ar->arWmi, wsc_status) != A_OK) { -+ ret = -EIO; -+ } -+ break; -+ } -+ case AR6000_XIOCTL_BMI_ROMPATCH_INSTALL: -+ { -+ A_UINT32 ROM_addr; -+ A_UINT32 RAM_addr; -+ A_UINT32 nbytes; -+ A_UINT32 do_activate; -+ A_UINT32 rompatch_id; -+ -+ get_user(ROM_addr, (A_UINT32 *)userdata); -+ get_user(RAM_addr, (A_UINT32 *)userdata + 1); -+ get_user(nbytes, (A_UINT32 *)userdata + 2); -+ get_user(do_activate, (A_UINT32 *)userdata + 3); -+ AR_DEBUG_PRINTF("Install rompatch from ROM: 0x%x to RAM: 0x%x length: %d\n", -+ ROM_addr, RAM_addr, nbytes); -+ ret = BMIrompatchInstall(hifDevice, ROM_addr, RAM_addr, -+ nbytes, do_activate, &rompatch_id); -+ if (ret == A_OK) { -+ put_user(rompatch_id, (unsigned int *)rq->ifr_data); /* return value */ -+ } -+ break; -+ } -+ -+ case AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL: -+ { -+ A_UINT32 rompatch_id; -+ -+ get_user(rompatch_id, (A_UINT32 *)userdata); -+ AR_DEBUG_PRINTF("UNinstall rompatch_id %d\n", rompatch_id); -+ ret = BMIrompatchUninstall(hifDevice, rompatch_id); -+ break; -+ } -+ -+ case AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE: -+ case AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE: -+ { -+ A_UINT32 rompatch_count; -+ -+ get_user(rompatch_count, (A_UINT32 *)userdata); -+ AR_DEBUG_PRINTF("Change rompatch activation count=%d\n", rompatch_count); -+ length = sizeof(A_UINT32) * rompatch_count; -+ if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) { -+ A_MEMZERO(buffer, length); -+ if (copy_from_user(buffer, &userdata[sizeof(rompatch_count)], length)) -+ { -+ ret = -EFAULT; -+ } else { -+ if (cmd == AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) { -+ ret = BMIrompatchActivate(hifDevice, rompatch_count, (A_UINT32 *)buffer); -+ } else { -+ ret = BMIrompatchDeactivate(hifDevice, rompatch_count, (A_UINT32 *)buffer); -+ } -+ } -+ A_FREE(buffer); -+ } else { -+ ret = -ENOMEM; -+ } -+ -+ break; -+ } -+ -+ case AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE: -+ { -+ WMI_SET_HOST_SLEEP_MODE_CMD setHostSleepMode; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&setHostSleepMode, userdata, -+ sizeof(setHostSleepMode))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_host_sleep_mode_cmd(ar->arWmi, -+ &setHostSleepMode) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_SET_WOW_MODE: -+ { -+ WMI_SET_WOW_MODE_CMD setWowMode; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&setWowMode, userdata, -+ sizeof(setWowMode))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_wow_mode_cmd(ar->arWmi, -+ &setWowMode) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_GET_WOW_LIST: -+ { -+ WMI_GET_WOW_LIST_CMD getWowList; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&getWowList, userdata, -+ sizeof(getWowList))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_get_wow_list_cmd(ar->arWmi, -+ &getWowList) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_WMI_ADD_WOW_PATTERN: -+ { -+#define WOW_PATTERN_SIZE 64 -+#define WOW_MASK_SIZE 64 -+ -+ WMI_ADD_WOW_PATTERN_CMD cmd; -+ A_UINT8 mask_data[WOW_PATTERN_SIZE]={0}; -+ A_UINT8 pattern_data[WOW_PATTERN_SIZE]={0}; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else { -+ -+ if(copy_from_user(&cmd, userdata, -+ sizeof(WMI_ADD_WOW_PATTERN_CMD))) -+ return -EFAULT; -+ if (copy_from_user(pattern_data, -+ userdata + 3, -+ cmd.filter_size)){ -+ ret = -EFAULT; -+ break; -+ } -+ if (copy_from_user(mask_data, -+ (userdata + 3 + cmd.filter_size), -+ cmd.filter_size)){ -+ ret = -EFAULT; -+ break; -+ } else { -+ if (wmi_add_wow_pattern_cmd(ar->arWmi, -+ &cmd, pattern_data, mask_data, cmd.filter_size) != A_OK){ -+ ret = -EIO; -+ } -+ } -+ } -+#undef WOW_PATTERN_SIZE -+#undef WOW_MASK_SIZE -+ break; -+ } -+ case AR6000_XIOCTL_WMI_DEL_WOW_PATTERN: -+ { -+ WMI_DEL_WOW_PATTERN_CMD delWowPattern; -+ -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&delWowPattern, userdata, -+ sizeof(delWowPattern))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_del_wow_pattern_cmd(ar->arWmi, -+ &delWowPattern) != A_OK) -+ { -+ ret = -EIO; -+ } -+ } -+ break; -+ } -+ case AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE: -+ if (ar->arHtcTarget != NULL) { -+ HTCDumpCreditStates(ar->arHtcTarget); -+ } -+ break; -+ case AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE: -+ if (ar->arHtcTarget != NULL) { -+ struct ar6000_traffic_activity_change data; -+ -+ if (copy_from_user(&data, userdata, sizeof(data))) -+ { -+ return -EFAULT; -+ } -+ /* note, this is used for testing (mbox ping testing), indicate activity -+ * change using the stream ID as the traffic class */ -+ ar6000_indicate_tx_activity(ar, -+ (A_UINT8)data.StreamID, -+ data.Active ? TRUE : FALSE); -+ } -+ break; -+ case AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS: -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&connectCtrlFlags, userdata, -+ sizeof(connectCtrlFlags))) -+ { -+ ret = -EFAULT; -+ } else { -+ ar->arConnectCtrlFlags = connectCtrlFlags; -+ } -+ break; -+ case AR6000_XIOCTL_WMI_SET_AKMP_PARAMS: -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else if (copy_from_user(&akmpParams, userdata, -+ sizeof(WMI_SET_AKMP_PARAMS_CMD))) -+ { -+ ret = -EFAULT; -+ } else { -+ if (wmi_set_akmp_params_cmd(ar->arWmi, &akmpParams) != A_OK) { -+ ret = -EIO; -+ } -+ } -+ break; -+ case AR6000_XIOCTL_WMI_SET_PMKID_LIST: -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else { -+ if (copy_from_user(&pmkidInfo.numPMKID, userdata, -+ sizeof(pmkidInfo.numPMKID))) -+ { -+ ret = -EFAULT; -+ break; -+ } -+ if (copy_from_user(&pmkidInfo.pmkidList, -+ userdata + sizeof(pmkidInfo.numPMKID), -+ pmkidInfo.numPMKID * sizeof(WMI_PMKID))) -+ { -+ ret = -EFAULT; -+ break; -+ } -+ if (wmi_set_pmkid_list_cmd(ar->arWmi, &pmkidInfo) != A_OK) { -+ ret = -EIO; -+ } -+ } -+ break; -+ case AR6000_XIOCTL_WMI_GET_PMKID_LIST: -+ if (ar->arWmiReady == FALSE) { -+ ret = -EIO; -+ } else { -+ if (wmi_get_pmkid_list_cmd(ar->arWmi) != A_OK) { -+ ret = -EIO; -+ } -+ } -+ break; -+ default: -+ ret = -EOPNOTSUPP; -+ } -+ return ret; -+} -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/netbuf.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/netbuf.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,225 @@ -+ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+#include -+#include -+#include -+#include "athdefs.h" -+#include "a_types.h" -+#include "a_osapi.h" -+#include "htc_packet.h" -+ -+#define AR6000_DATA_OFFSET 64 -+ -+void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt) -+{ -+ skb_queue_tail((struct sk_buff_head *) q, (struct sk_buff *) pkt); -+} -+ -+void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt) -+{ -+ skb_queue_head((struct sk_buff_head *) q, (struct sk_buff *) pkt); -+} -+ -+void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q) -+{ -+ return((void *) skb_dequeue((struct sk_buff_head *) q)); -+} -+ -+int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q) -+{ -+ return(skb_queue_len((struct sk_buff_head *) q)); -+} -+ -+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q) -+{ -+ return(skb_queue_empty((struct sk_buff_head *) q)); -+} -+ -+void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q) -+{ -+ skb_queue_head_init((struct sk_buff_head *) q); -+} -+ -+void * -+a_netbuf_alloc(int size) -+{ -+ struct sk_buff *skb; -+ skb = dev_alloc_skb(AR6000_DATA_OFFSET + sizeof(HTC_PACKET) + size); -+ skb_reserve(skb, AR6000_DATA_OFFSET + sizeof(HTC_PACKET)); -+ return ((void *)skb); -+} -+ -+/* -+ * Allocate an SKB w.o. any encapsulation requirement. -+ */ -+void * -+a_netbuf_alloc_raw(int size) -+{ -+ struct sk_buff *skb; -+ -+ skb = dev_alloc_skb(size); -+ -+ return ((void *)skb); -+} -+ -+void -+a_netbuf_free(void *bufPtr) -+{ -+ struct sk_buff *skb = (struct sk_buff *)bufPtr; -+ -+ dev_kfree_skb(skb); -+} -+ -+A_UINT32 -+a_netbuf_to_len(void *bufPtr) -+{ -+ return (((struct sk_buff *)bufPtr)->len); -+} -+ -+void * -+a_netbuf_to_data(void *bufPtr) -+{ -+ return (((struct sk_buff *)bufPtr)->data); -+} -+ -+/* -+ * Add len # of bytes to the beginning of the network buffer -+ * pointed to by bufPtr -+ */ -+A_STATUS -+a_netbuf_push(void *bufPtr, A_INT32 len) -+{ -+ skb_push((struct sk_buff *)bufPtr, len); -+ -+ return A_OK; -+} -+ -+/* -+ * Add len # of bytes to the beginning of the network buffer -+ * pointed to by bufPtr and also fill with data -+ */ -+A_STATUS -+a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len) -+{ -+ skb_push((struct sk_buff *) bufPtr, len); -+ A_MEMCPY(((struct sk_buff *)bufPtr)->data, srcPtr, len); -+ -+ return A_OK; -+} -+ -+/* -+ * Add len # of bytes to the end of the network buffer -+ * pointed to by bufPtr -+ */ -+A_STATUS -+a_netbuf_put(void *bufPtr, A_INT32 len) -+{ -+ skb_put((struct sk_buff *)bufPtr, len); -+ -+ return A_OK; -+} -+ -+/* -+ * Add len # of bytes to the end of the network buffer -+ * pointed to by bufPtr and also fill with data -+ */ -+A_STATUS -+a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len) -+{ -+ char *start = ((struct sk_buff *)bufPtr)->data + -+ ((struct sk_buff *)bufPtr)->len; -+ skb_put((struct sk_buff *)bufPtr, len); -+ A_MEMCPY(start, srcPtr, len); -+ -+ return A_OK; -+} -+ -+ -+/* -+ * Trim the network buffer pointed to by bufPtr to len # of bytes -+ */ -+A_STATUS -+a_netbuf_setlen(void *bufPtr, A_INT32 len) -+{ -+ skb_trim((struct sk_buff *)bufPtr, len); -+ -+ return A_OK; -+} -+ -+/* -+ * Chop of len # of bytes from the end of the buffer. -+ */ -+A_STATUS -+a_netbuf_trim(void *bufPtr, A_INT32 len) -+{ -+ skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len); -+ -+ return A_OK; -+} -+ -+/* -+ * Chop of len # of bytes from the end of the buffer and return the data. -+ */ -+A_STATUS -+a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len) -+{ -+ char *start = ((struct sk_buff *)bufPtr)->data + -+ (((struct sk_buff *)bufPtr)->len - len); -+ -+ A_MEMCPY(dstPtr, start, len); -+ skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len); -+ -+ return A_OK; -+} -+ -+ -+/* -+ * Returns the number of bytes available to a a_netbuf_push() -+ */ -+A_INT32 -+a_netbuf_headroom(void *bufPtr) -+{ -+ return (skb_headroom((struct sk_buff *)bufPtr)); -+} -+ -+/* -+ * Removes specified number of bytes from the beginning of the buffer -+ */ -+A_STATUS -+a_netbuf_pull(void *bufPtr, A_INT32 len) -+{ -+ skb_pull((struct sk_buff *)bufPtr, len); -+ -+ return A_OK; -+} -+ -+/* -+ * Removes specified number of bytes from the beginning of the buffer -+ * and return the data -+ */ -+A_STATUS -+a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len) -+{ -+ A_MEMCPY(dstPtr, ((struct sk_buff *)bufPtr)->data, len); -+ skb_pull((struct sk_buff *)bufPtr, len); -+ -+ return A_OK; -+} -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/osapi_linux.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/osapi_linux.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,319 @@ -+/* -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/osapi_linux.h#1 $ -+ * -+ * This file contains the definitions of the basic atheros data types. -+ * It is used to map the data types in atheros files to a platform specific -+ * type. -+ * -+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef _OSAPI_LINUX_H_ -+#define _OSAPI_LINUX_H_ -+ -+#ifdef __KERNEL__ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+#include -+#endif -+#include -+#include -+#include -+#ifdef KERNEL_2_4 -+#include -+#include -+#endif -+ -+#ifdef __GNUC__ -+#define __ATTRIB_PACK __attribute__ ((packed)) -+#define __ATTRIB_PRINTF __attribute__ ((format (printf, 1, 2))) -+#define __ATTRIB_NORETURN __attribute__ ((noreturn)) -+#ifndef INLINE -+#define INLINE __inline__ -+#endif -+#else /* Not GCC */ -+#define __ATTRIB_PACK -+#define __ATTRIB_PRINTF -+#define __ATTRIB_NORETURN -+#ifndef INLINE -+#define INLINE __inline -+#endif -+#endif /* End __GNUC__ */ -+ -+#define PREPACK -+#define POSTPACK __ATTRIB_PACK -+ -+/* -+ * Endianes macros -+ */ -+#define A_BE2CPU8(x) ntohb(x) -+#define A_BE2CPU16(x) ntohs(x) -+#define A_BE2CPU32(x) ntohl(x) -+ -+#define A_LE2CPU8(x) (x) -+#define A_LE2CPU16(x) (x) -+#define A_LE2CPU32(x) (x) -+ -+#define A_CPU2BE8(x) htonb(x) -+#define A_CPU2BE16(x) htons(x) -+#define A_CPU2BE32(x) htonl(x) -+ -+#define A_MEMCPY(dst, src, len) memcpy((A_UINT8 *)(dst), (src), (len)) -+#define A_MEMZERO(addr, len) memset(addr, 0, len) -+#define A_MEMCMP(addr1, addr2, len) memcmp((addr1), (addr2), (len)) -+#define A_MALLOC(size) kmalloc((size), GFP_KERNEL) -+#define A_MALLOC_NOWAIT(size) kmalloc((size), GFP_ATOMIC) -+#define A_FREE(addr) kfree(addr) -+#define A_PRINTF(args...) printk(args) -+ -+/* Mutual Exclusion */ -+typedef spinlock_t A_MUTEX_T; -+#define A_MUTEX_INIT(mutex) spin_lock_init(mutex) -+#define A_MUTEX_LOCK(mutex) spin_lock_bh(mutex) -+#define A_MUTEX_UNLOCK(mutex) spin_unlock_bh(mutex) -+#define A_IS_MUTEX_VALID(mutex) TRUE /* okay to return true, since A_MUTEX_DELETE does nothing */ -+#define A_MUTEX_DELETE(mutex) /* spin locks are not kernel resources so nothing to free.. */ -+ -+/* Get current time in ms adding a constant offset (in ms) */ -+#define A_GET_MS(offset) \ -+ (jiffies + ((offset) / 1000) * HZ) -+ -+/* -+ * Timer Functions -+ */ -+#define A_MDELAY(msecs) mdelay(msecs) -+typedef struct timer_list A_TIMER; -+ -+#define A_INIT_TIMER(pTimer, pFunction, pArg) do { \ -+ init_timer(pTimer); \ -+ (pTimer)->function = (pFunction); \ -+ (pTimer)->data = (unsigned long)(pArg); \ -+} while (0) -+ -+/* -+ * Start a Timer that elapses after 'periodMSec' milli-seconds -+ * Support is provided for a one-shot timer. The 'repeatFlag' is -+ * ignored. -+ */ -+#define A_TIMEOUT_MS(pTimer, periodMSec, repeatFlag) do { \ -+ if (repeatFlag) { \ -+ printk("\n" __FILE__ ":%d: Timer Repeat requested\n",__LINE__); \ -+ panic("Timer Repeat"); \ -+ } \ -+ mod_timer((pTimer), jiffies + HZ * (periodMSec) / 1000); \ -+} while (0) -+ -+/* -+ * Cancel the Timer. -+ */ -+#define A_UNTIMEOUT(pTimer) do { \ -+ del_timer((pTimer)); \ -+} while (0) -+ -+#define A_DELETE_TIMER(pTimer) do { \ -+} while (0) -+ -+/* -+ * Wait Queue related functions -+ */ -+typedef wait_queue_head_t A_WAITQUEUE_HEAD; -+#define A_INIT_WAITQUEUE_HEAD(head) init_waitqueue_head(head) -+#ifndef wait_event_interruptible_timeout -+#define __wait_event_interruptible_timeout(wq, condition, ret) \ -+do { \ -+ wait_queue_t __wait; \ -+ init_waitqueue_entry(&__wait, current); \ -+ \ -+ add_wait_queue(&wq, &__wait); \ -+ for (;;) { \ -+ set_current_state(TASK_INTERRUPTIBLE); \ -+ if (condition) \ -+ break; \ -+ if (!signal_pending(current)) { \ -+ ret = schedule_timeout(ret); \ -+ if (!ret) \ -+ break; \ -+ continue; \ -+ } \ -+ ret = -ERESTARTSYS; \ -+ break; \ -+ } \ -+ current->state = TASK_RUNNING; \ -+ remove_wait_queue(&wq, &__wait); \ -+} while (0) -+ -+#define wait_event_interruptible_timeout(wq, condition, timeout) \ -+({ \ -+ long __ret = timeout; \ -+ if (!(condition)) \ -+ __wait_event_interruptible_timeout(wq, condition, __ret); \ -+ __ret; \ -+}) -+#endif /* wait_event_interruptible_timeout */ -+ -+#define A_WAIT_EVENT_INTERRUPTIBLE_TIMEOUT(head, condition, timeout) do { \ -+ wait_event_interruptible_timeout(head, condition, timeout); \ -+} while (0) -+ -+#define A_WAKE_UP(head) wake_up(head) -+ -+#ifdef DEBUG -+#define A_ASSERT(expr) \ -+ if (!(expr)) { \ -+ printk(KERN_ALERT "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \ -+ panic(#expr); \ -+ } -+ -+#else -+#define A_ASSERT(expr) -+#endif /* DEBUG */ -+ -+/* -+ * Initialization of the network buffer subsystem -+ */ -+#define A_NETBUF_INIT() -+ -+/* -+ * Network buffer queue support -+ */ -+typedef struct sk_buff_head A_NETBUF_QUEUE_T; -+ -+#define A_NETBUF_QUEUE_INIT(q) \ -+ a_netbuf_queue_init(q) -+ -+#define A_NETBUF_ENQUEUE(q, pkt) \ -+ a_netbuf_enqueue((q), (pkt)) -+#define A_NETBUF_PREQUEUE(q, pkt) \ -+ a_netbuf_prequeue((q), (pkt)) -+#define A_NETBUF_DEQUEUE(q) \ -+ (a_netbuf_dequeue(q)) -+#define A_NETBUF_QUEUE_SIZE(q) \ -+ a_netbuf_queue_size(q) -+#define A_NETBUF_QUEUE_EMPTY(q) \ -+ a_netbuf_queue_empty(q) -+ -+/* -+ * Network buffer support -+ */ -+#define A_NETBUF_ALLOC(size) \ -+ a_netbuf_alloc(size) -+#define A_NETBUF_ALLOC_RAW(size) \ -+ a_netbuf_alloc_raw(size) -+#define A_NETBUF_FREE(bufPtr) \ -+ a_netbuf_free(bufPtr) -+#define A_NETBUF_DATA(bufPtr) \ -+ a_netbuf_to_data(bufPtr) -+#define A_NETBUF_LEN(bufPtr) \ -+ a_netbuf_to_len(bufPtr) -+#define A_NETBUF_PUSH(bufPtr, len) \ -+ a_netbuf_push(bufPtr, len) -+#define A_NETBUF_PUT(bufPtr, len) \ -+ a_netbuf_put(bufPtr, len) -+#define A_NETBUF_TRIM(bufPtr,len) \ -+ a_netbuf_trim(bufPtr, len) -+#define A_NETBUF_PULL(bufPtr, len) \ -+ a_netbuf_pull(bufPtr, len) -+#define A_NETBUF_HEADROOM(bufPtr)\ -+ a_netbuf_headroom(bufPtr) -+#define A_NETBUF_SETLEN(bufPtr,len) \ -+ a_netbuf_setlen(bufPtr, len) -+ -+/* Add data to end of a buffer */ -+#define A_NETBUF_PUT_DATA(bufPtr, srcPtr, len) \ -+ a_netbuf_put_data(bufPtr, srcPtr, len) -+ -+/* Add data to start of the buffer */ -+#define A_NETBUF_PUSH_DATA(bufPtr, srcPtr, len) \ -+ a_netbuf_push_data(bufPtr, srcPtr, len) -+ -+/* Remove data at start of the buffer */ -+#define A_NETBUF_PULL_DATA(bufPtr, dstPtr, len) \ -+ a_netbuf_pull_data(bufPtr, dstPtr, len) -+ -+/* Remove data from the end of the buffer */ -+#define A_NETBUF_TRIM_DATA(bufPtr, dstPtr, len) \ -+ a_netbuf_trim_data(bufPtr, dstPtr, len) -+ -+/* View data as "size" contiguous bytes of type "t" */ -+#define A_NETBUF_VIEW_DATA(bufPtr, t, size) \ -+ (t )( ((struct skbuf *)(bufPtr))->data) -+ -+/* return the beginning of the headroom for the buffer */ -+#define A_NETBUF_HEAD(bufPtr) \ -+ ((((struct sk_buff *)(bufPtr))->head)) -+ -+/* -+ * OS specific network buffer access routines -+ */ -+void *a_netbuf_alloc(int size); -+void *a_netbuf_alloc_raw(int size); -+void a_netbuf_free(void *bufPtr); -+void *a_netbuf_to_data(void *bufPtr); -+A_UINT32 a_netbuf_to_len(void *bufPtr); -+A_STATUS a_netbuf_push(void *bufPtr, A_INT32 len); -+A_STATUS a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len); -+A_STATUS a_netbuf_put(void *bufPtr, A_INT32 len); -+A_STATUS a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len); -+A_STATUS a_netbuf_pull(void *bufPtr, A_INT32 len); -+A_STATUS a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len); -+A_STATUS a_netbuf_trim(void *bufPtr, A_INT32 len); -+A_STATUS a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len); -+A_STATUS a_netbuf_setlen(void *bufPtr, A_INT32 len); -+A_INT32 a_netbuf_headroom(void *bufPtr); -+void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt); -+void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt); -+void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q); -+int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q); -+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q); -+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q); -+void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q); -+ -+/* -+ * Kernel v.s User space functions -+ */ -+A_UINT32 a_copy_to_user(void *to, const void *from, A_UINT32 n); -+A_UINT32 a_copy_from_user(void *to, const void *from, A_UINT32 n); -+ -+#else /* __KERNEL__ */ -+ -+#ifdef __GNUC__ -+#define __ATTRIB_PACK __attribute__ ((packed)) -+#define __ATTRIB_PRINTF __attribute__ ((format (printf, 1, 2))) -+#define __ATTRIB_NORETURN __attribute__ ((noreturn)) -+#ifndef INLINE -+#define INLINE __inline__ -+#endif -+#else /* Not GCC */ -+#define __ATTRIB_PACK -+#define __ATTRIB_PRINTF -+#define __ATTRIB_NORETURN -+#ifndef INLINE -+#define INLINE __inline -+#endif -+#endif /* End __GNUC__ */ -+ -+#define PREPACK -+#define POSTPACK __ATTRIB_PACK -+ -+#endif /* __KERNEL__ */ -+ -+#endif /* _OSAPI_LINUX_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/wireless_ext.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/ar6000/wireless_ext.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,1952 @@ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "ar6000_drv.h" -+ -+static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; -+static void ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi); -+extern unsigned int wmitimeout; -+extern A_WAITQUEUE_HEAD arEvent; -+extern wait_queue_head_t ar6000_scan_queue; -+ -+/* -+ * Encode a WPA or RSN information element as a custom -+ * element using the hostap format. -+ */ -+static u_int -+encode_ie(void *buf, size_t bufsize, -+ const u_int8_t *ie, size_t ielen, -+ const char *leader, size_t leader_len) -+{ -+ u_int8_t *p; -+ int i; -+ -+ if (bufsize < leader_len) -+ return 0; -+ p = buf; -+ memcpy(p, leader, leader_len); -+ bufsize -= leader_len; -+ p += leader_len; -+ for (i = 0; i < ielen && bufsize > 2; i++) -+ p += sprintf(p, "%02x", ie[i]); -+ return (i == ielen ? p - (u_int8_t *)buf : 0); -+} -+ -+void -+ar6000_scan_node(void *arg, bss_t *ni) -+{ -+ struct iw_event iwe; -+#if WIRELESS_EXT > 14 -+ char buf[64*2 + 30]; -+#endif -+ struct ar_giwscan_param *param; -+ A_CHAR *current_ev; -+ A_CHAR *end_buf; -+ struct ieee80211_common_ie *cie; -+ -+ param = (struct ar_giwscan_param *)arg; -+ -+ if (param->current_ev >= param->end_buf) { -+ return; -+ } -+ if ((param->firstPass == TRUE) && -+ ((ni->ni_cie.ie_wpa == NULL) && (ni->ni_cie.ie_rsn == NULL))) { -+ /* -+ * Only forward wpa bss's in first pass -+ */ -+ return; -+ } -+ -+ if ((param->firstPass == FALSE) && -+ ((ni->ni_cie.ie_wpa != NULL) || (ni->ni_cie.ie_rsn != NULL))) { -+ /* -+ * Only forward non-wpa bss's in 2nd pass -+ */ -+ return; -+ } -+ -+ current_ev = param->current_ev; -+ end_buf = param->end_buf; -+ -+ cie = &ni->ni_cie; -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = SIOCGIWAP; -+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER; -+ A_MEMCPY(iwe.u.ap_addr.sa_data, ni->ni_macaddr, 6); -+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, -+ IW_EV_ADDR_LEN); -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = SIOCGIWESSID; -+ iwe.u.data.flags = 1; -+ iwe.u.data.length = cie->ie_ssid[1]; -+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, -+ &cie->ie_ssid[2]); -+ -+ if (cie->ie_capInfo & (IEEE80211_CAPINFO_ESS|IEEE80211_CAPINFO_IBSS)) { -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = SIOCGIWMODE; -+ iwe.u.mode = cie->ie_capInfo & IEEE80211_CAPINFO_ESS ? -+ IW_MODE_MASTER : IW_MODE_ADHOC; -+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, -+ IW_EV_UINT_LEN); -+ } -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = SIOCGIWFREQ; -+ iwe.u.freq.m = cie->ie_chan * 100000; -+ iwe.u.freq.e = 1; -+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, -+ IW_EV_FREQ_LEN); -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = IWEVQUAL; -+ ar6000_set_quality(&iwe.u.qual, ni->ni_snr); -+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, -+ IW_EV_QUAL_LEN); -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = SIOCGIWENCODE; -+ if (cie->ie_capInfo & IEEE80211_CAPINFO_PRIVACY) { -+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; -+ } else { -+ iwe.u.data.flags = IW_ENCODE_DISABLED; -+ } -+ iwe.u.data.length = 0; -+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ""); -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = IWEVCUSTOM; -+ snprintf(buf, sizeof(buf), "bcn_int=%d", cie->ie_beaconInt); -+ iwe.u.data.length = strlen(buf); -+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf); -+ -+ if (cie->ie_wpa != NULL) { -+ static const char wpa_leader[] = "wpa_ie="; -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = IWEVCUSTOM; -+ iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wpa, -+ cie->ie_wpa[1]+2, -+ wpa_leader, sizeof(wpa_leader)-1); -+ -+ if (iwe.u.data.length != 0) { -+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf); -+ } -+ } -+ -+ if (cie->ie_rsn != NULL && cie->ie_rsn[0] == IEEE80211_ELEMID_RSN) { -+ static const char rsn_leader[] = "rsn_ie="; -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = IWEVCUSTOM; -+ iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_rsn, -+ cie->ie_rsn[1]+2, -+ rsn_leader, sizeof(rsn_leader)-1); -+ -+ if (iwe.u.data.length != 0) { -+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf); -+ } -+ } -+ -+ if (cie->ie_wmm != NULL) { -+ static const char wmm_leader[] = "wmm_ie="; -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = IWEVCUSTOM; -+ iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wmm, -+ cie->ie_wmm[1]+2, -+ wmm_leader, sizeof(wmm_leader)-1); -+ if (iwe.u.data.length != 0) { -+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf); -+ } -+ } -+ -+ if (cie->ie_ath != NULL) { -+ static const char ath_leader[] = "ath_ie="; -+ -+ A_MEMZERO(&iwe, sizeof(iwe)); -+ iwe.cmd = IWEVCUSTOM; -+ iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_ath, -+ cie->ie_ath[1]+2, -+ ath_leader, sizeof(ath_leader)-1); -+ if (iwe.u.data.length != 0) { -+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf); -+ } -+ } -+ -+ param->current_ev = current_ev; -+} -+ -+int -+ar6000_ioctl_giwscan(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *data, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ struct ar_giwscan_param param; -+ int i; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ param.current_ev = extra; -+ param.end_buf = extra + IW_SCAN_MAX_DATA; -+ param.firstPass = TRUE; -+ -+ /* -+ * Do two passes to insure WPA scan candidates -+ * are sorted to the front. This is a hack to deal with -+ * the wireless extensions capping scan results at -+ * IW_SCAN_MAX_DATA bytes. In densely populated environments -+ * it's easy to overflow this buffer (especially with WPA/RSN -+ * information elements). Note this sorting hack does not -+ * guarantee we won't overflow anyway. -+ */ -+ for (i = 0; i < 2; i++) { -+ /* -+ * Translate data to WE format. -+ */ -+ wmi_iterate_nodes(ar->arWmi, ar6000_scan_node, ¶m); -+ param.firstPass = FALSE; -+ if (param.current_ev >= param.end_buf) { -+ data->length = param.current_ev - extra; -+ return -E2BIG; -+ } -+ } -+ -+ if(!(data->length = param.current_ev - extra)) { -+ printk("%s(): data length %d\n", __FUNCTION__, data->length); -+ return -EAGAIN; -+ } -+ return 0; -+} -+ -+extern int reconnect_flag; -+/* SIOCSIWESSID */ -+static int -+ar6000_ioctl_siwessid(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *data, char *ssid) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ A_STATUS status; -+ A_UINT8 arNetworkType; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ /* -+ * iwconfig passes a string with length excluding any trailing NUL. -+ * FIXME: we should be able to set an ESSID of 32 bytes, yet things fall -+ * over badly if we do. So we limit the ESSID to 31 bytes. -+ */ -+ if (data->flags && (!data->length || data->length >= sizeof(ar->arSsid))) { -+ /* -+ * ssid is invalid -+ */ -+ return -EINVAL; -+ } -+ /* Added for bug 25178, return an IOCTL error instead of target returning -+ Illegal parameter error when either the BSSID or channel is missing -+ and we cannot scan during connect. -+ */ -+ if (data->flags) { -+ if (ar->arSkipScan == TRUE && -+ (ar->arChannelHint == 0 || -+ (!ar->arReqBssid[0] && !ar->arReqBssid[1] && !ar->arReqBssid[2] && -+ !ar->arReqBssid[3] && !ar->arReqBssid[4] && !ar->arReqBssid[5]))) -+ { -+ return -EINVAL; -+ } -+ } -+ -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ -+ if (ar->arTxPending[WMI_CONTROL_PRI]) { -+ /* -+ * sleep until the command queue drains -+ */ -+ wait_event_interruptible_timeout(arEvent, -+ ar->arTxPending[WMI_CONTROL_PRI] == 0, wmitimeout * HZ); -+ if (signal_pending(current)) { -+ return -EINTR; -+ } -+ } -+ -+ if (!data->flags) { -+ arNetworkType = ar->arNetworkType; -+ ar6000_init_profile_info(ar); -+ ar->arNetworkType = arNetworkType; -+ } -+ -+ if ((ar->arSsidLen) || (!data->flags)) -+ { -+ if ((!data->flags) || -+ (A_MEMCMP(ar->arSsid, ssid, ar->arSsidLen) != 0) || -+ (ar->arSsidLen != (data->length))) -+ { -+ /* -+ * SSID set previously or essid off has been issued. -+ * -+ * Disconnect Command is issued in two cases after wmi is ready -+ * (1) ssid is different from the previous setting -+ * (2) essid off has been issued -+ * -+ */ -+ if (ar->arWmiReady == TRUE) { -+ reconnect_flag = 0; -+ status = wmi_disconnect_cmd(ar->arWmi); -+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); -+ ar->arSsidLen = 0; -+ if (ar->arSkipScan == FALSE) { -+ A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); -+ } -+ if (!data->flags) { -+ up(&ar->arSem); -+ return 0; -+ } -+ } else { -+ up(&ar->arSem); -+ } -+ } -+ else -+ { -+ /* -+ * SSID is same, so we assume profile hasn't changed. -+ * If the interface is up and wmi is ready, we issue -+ * a reconnect cmd. Issue a reconnect only we are already -+ * connected. -+ */ -+ if((ar->arConnected == TRUE) && (ar->arWmiReady == TRUE)) -+ { -+ reconnect_flag = TRUE; -+ status = wmi_reconnect_cmd(ar->arWmi,ar->arReqBssid, -+ ar->arChannelHint); -+ up(&ar->arSem); -+ if (status != A_OK) { -+ return -EIO; -+ } -+ return 0; -+ } -+ else{ -+ /* -+ * Dont return if connect is pending. -+ */ -+ if(!(ar->arConnectPending)) { -+ up(&ar->arSem); -+ return 0; -+ } -+ } -+ } -+ } -+ -+ ar->arSsidLen = data->length; -+ A_MEMCPY(ar->arSsid, ssid, ar->arSsidLen); -+ -+ /* The ssid length check prevents second "essid off" from the user, -+ to be treated as a connect cmd. The second "essid off" is ignored. -+ */ -+ if((ar->arWmiReady == TRUE) && (ar->arSsidLen > 0) ) -+ { -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ if (SHARED_AUTH == ar->arDot11AuthMode) { -+ ar6000_install_static_wep_keys(ar); -+ } -+ AR_DEBUG_PRINTF("Connect called with authmode %d dot11 auth %d"\ -+ " PW crypto %d PW crypto Len %d GRP crypto %d"\ -+ " GRP crypto Len %d\n", -+ ar->arAuthMode, ar->arDot11AuthMode, -+ ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, -+ ar->arGroupCrypto, ar->arGroupCryptoLen); -+ reconnect_flag = 0; -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType, -+ ar->arDot11AuthMode, ar->arAuthMode, -+ ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, -+ ar->arGroupCrypto,ar->arGroupCryptoLen, -+ ar->arSsidLen, ar->arSsid, -+ ar->arReqBssid, ar->arChannelHint, -+ ar->arConnectCtrlFlags); -+ -+ -+ up(&ar->arSem); -+ -+ if (status != A_OK) { -+ return -EIO; -+ } -+ ar->arConnectPending = TRUE; -+ }else{ -+ up(&ar->arSem); -+ } -+ return 0; -+} -+ -+/* SIOCGIWESSID */ -+static int -+ar6000_ioctl_giwessid(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *data, char *essid) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ data->flags = 1; -+ data->length = ar->arSsidLen; -+ A_MEMCPY(essid, ar->arSsid, ar->arSsidLen); -+ -+ return 0; -+} -+ -+ -+void ar6000_install_static_wep_keys(AR_SOFTC_T *ar) -+{ -+ A_UINT8 index; -+ A_UINT8 keyUsage; -+ -+ for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) { -+ if (ar->arWepKeyList[index].arKeyLen) { -+ keyUsage = GROUP_USAGE; -+ if (index == ar->arDefTxKeyIndex) { -+ keyUsage |= TX_USAGE; -+ } -+ wmi_addKey_cmd(ar->arWmi, -+ index, -+ WEP_CRYPT, -+ keyUsage, -+ ar->arWepKeyList[index].arKeyLen, -+ NULL, -+ ar->arWepKeyList[index].arKey, KEY_OP_INIT_VAL, -+ NO_SYNC_WMIFLAG); -+ } -+ } -+} -+ -+int -+ar6000_ioctl_delkey(struct net_device *dev, struct iw_request_info *info, -+ void *w, char *extra) -+{ -+ return 0; -+} -+ -+int -+ar6000_ioctl_setmlme(struct net_device *dev, struct iw_request_info *info, -+ void *w, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ struct ieee80211req_mlme *mlme = (struct ieee80211req_mlme *)extra; -+ -+ if ((ar->arWmiReady == FALSE) || (ar->arConnected != TRUE)) -+ return -EIO; -+ -+ switch (mlme->im_op) { -+ case IEEE80211_MLME_DISASSOC: -+ case IEEE80211_MLME_DEAUTH: -+ /* Not Supported */ -+ break; -+ default: -+ break; -+ } -+ return 0; -+} -+ -+ -+int -+ar6000_ioctl_setwmmparams(struct net_device *dev, struct iw_request_info *info, -+ void *w, char *extra) -+{ -+ return -EIO; /* for now */ -+} -+ -+int -+ar6000_ioctl_getwmmparams(struct net_device *dev, struct iw_request_info *info, -+ void *w, char *extra) -+{ -+ return -EIO; /* for now */ -+} -+ -+int ar6000_ioctl_setoptie(struct net_device *dev, struct iw_request_info *info, -+ struct iw_point *data, char *extra) -+{ -+ /* The target generates the WPA/RSN IE */ -+ return 0; -+} -+ -+int -+ar6000_ioctl_setauthalg(struct net_device *dev, struct iw_request_info *info, -+ void *w, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ struct ieee80211req_authalg *req = (struct ieee80211req_authalg *)extra; -+ int ret = 0; -+ -+ -+ AR6000_SPIN_LOCK(&ar->arLock, 0); -+ -+ if (req->auth_alg == AUTH_ALG_OPEN_SYSTEM) { -+ ar->arDot11AuthMode = OPEN_AUTH; -+ } else if (req->auth_alg == AUTH_ALG_LEAP) { -+ ar->arDot11AuthMode = LEAP_AUTH; -+ ar->arPairwiseCrypto = WEP_CRYPT; -+ ar->arGroupCrypto = WEP_CRYPT; -+ } else { -+ ret = -EIO; -+ } -+ -+ AR6000_SPIN_UNLOCK(&ar->arLock, 0); -+ -+ return ret; -+} -+static int -+ar6000_ioctl_addpmkid(struct net_device *dev, struct iw_request_info *info, -+ void *w, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ struct ieee80211req_addpmkid *req = (struct ieee80211req_addpmkid *)extra; -+ A_STATUS status; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ AR_DEBUG_PRINTF("Add pmkid for %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x en=%d\n", -+ req->pi_bssid[0], req->pi_bssid[1], req->pi_bssid[2], -+ req->pi_bssid[3], req->pi_bssid[4], req->pi_bssid[5], -+ req->pi_enable); -+ -+ status = wmi_setPmkid_cmd(ar->arWmi, req->pi_bssid, req->pi_pmkid, -+ req->pi_enable); -+ -+ if (status != A_OK) { -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+/* -+ * SIOCSIWRATE -+ */ -+int -+ar6000_ioctl_siwrate(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *rrq, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ A_UINT32 kbps; -+ -+ if (rrq->fixed) { -+ kbps = rrq->value / 1000; /* rrq->value is in bps */ -+ } else { -+ kbps = -1; /* -1 indicates auto rate */ -+ } -+ if(kbps != -1 && wmi_validate_bitrate(ar->arWmi, kbps) == A_EINVAL) -+ { -+ AR_DEBUG_PRINTF("BitRate is not Valid %d\n", kbps); -+ return -EINVAL; -+ } -+ ar->arBitRate = kbps; -+ if(ar->arWmiReady == TRUE) -+ { -+ if (wmi_set_bitrate_cmd(ar->arWmi, kbps) != A_OK) { -+ return -EINVAL; -+ } -+ } -+ return 0; -+} -+ -+/* -+ * SIOCGIWRATE -+ */ -+int -+ar6000_ioctl_giwrate(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *rrq, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ int ret = 0; -+ -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ if(ar->arWmiReady == TRUE) -+ { -+ ar->arBitRate = 0xFFFF; -+ if (wmi_get_bitrate_cmd(ar->arWmi) != A_OK) { -+ up(&ar->arSem); -+ return -EIO; -+ } -+ wait_event_interruptible_timeout(arEvent, ar->arBitRate != 0xFFFF, wmitimeout * HZ); -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } -+ } -+ /* If the interface is down or wmi is not ready or the target is not -+ connected - return the value stored in the device structure */ -+ if (!ret) { -+ if (ar->arBitRate == -1) { -+ rrq->fixed = TRUE; -+ rrq->value = 0; -+ } else { -+ rrq->value = ar->arBitRate * 1000; -+ } -+ } -+ -+ up(&ar->arSem); -+ -+ return ret; -+} -+ -+/* -+ * SIOCSIWTXPOW -+ */ -+static int -+ar6000_ioctl_siwtxpow(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *rrq, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ A_UINT8 dbM; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (ar->arRadioSwitch == WLAN_ENABLED -+ && rrq->disabled) { -+ if (wmi_switch_radio(ar->arWmi, WLAN_DISABLED) < 0) -+ return -EIO; -+ ar->arRadioSwitch = WLAN_DISABLED; -+ } else if (ar->arRadioSwitch == WLAN_DISABLED -+ && !rrq->disabled) { -+ if (wmi_switch_radio(ar->arWmi, WLAN_ENABLED) < 0) -+ return -EIO; -+ ar->arRadioSwitch = WLAN_ENABLED; -+ } -+ -+ if (rrq->fixed) { -+ if (rrq->flags != IW_TXPOW_DBM) { -+ return -EOPNOTSUPP; -+ } -+ ar->arTxPwr= dbM = rrq->value; -+ ar->arTxPwrSet = TRUE; -+ } else { -+ ar->arTxPwr = dbM = 0; -+ ar->arTxPwrSet = FALSE; -+ } -+ if(ar->arWmiReady == TRUE) -+ { -+ AR_DEBUG_PRINTF("Set tx pwr cmd %d dbM\n", dbM); -+ wmi_set_txPwr_cmd(ar->arWmi, dbM); -+ } -+ return 0; -+} -+ -+/* -+ * SIOCGIWTXPOW -+ */ -+int -+ar6000_ioctl_giwtxpow(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *rrq, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ int ret = 0; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (ar->arRadioSwitch == WLAN_DISABLED) { -+ rrq->disabled = 1; -+ return 0; -+ } -+ -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ if((ar->arWmiReady == TRUE) && (ar->arConnected == TRUE)) -+ { -+ ar->arTxPwr = 0; -+ -+ if (wmi_get_txPwr_cmd(ar->arWmi) != A_OK) { -+ up(&ar->arSem); -+ return -EIO; -+ } -+ -+ wait_event_interruptible_timeout(arEvent, ar->arTxPwr != 0, wmitimeout * HZ); -+ -+ if (signal_pending(current)) { -+ ret = -EINTR; -+ } -+ } -+ /* If the interace is down or wmi is not ready or target is not connected -+ then return value stored in the device structure */ -+ -+ if (!ret) { -+ if (ar->arTxPwrSet == TRUE) { -+ rrq->fixed = TRUE; -+ } -+ rrq->value = ar->arTxPwr; -+ rrq->flags = IW_TXPOW_DBM; -+ } -+ -+ up(&ar->arSem); -+ -+ return ret; -+} -+ -+/* -+ * SIOCSIWRETRY -+ * since iwconfig only provides us with one max retry value, we use it -+ * to apply to data frames of the BE traffic class. -+ */ -+static int -+ar6000_ioctl_siwretry(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *rrq, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (rrq->disabled) { -+ return -EOPNOTSUPP; -+ } -+ -+ if ((rrq->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT) { -+ return -EOPNOTSUPP; -+ } -+ -+ if ( !(rrq->value >= WMI_MIN_RETRIES) || !(rrq->value <= WMI_MAX_RETRIES)) { -+ return - EINVAL; -+ } -+ if(ar->arWmiReady == TRUE) -+ { -+ if (wmi_set_retry_limits_cmd(ar->arWmi, DATA_FRAMETYPE, WMM_AC_BE, -+ rrq->value, 0) != A_OK){ -+ return -EINVAL; -+ } -+ } -+ ar->arMaxRetries = rrq->value; -+ return 0; -+} -+ -+/* -+ * SIOCGIWRETRY -+ */ -+static int -+ar6000_ioctl_giwretry(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *rrq, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ rrq->disabled = 0; -+ switch (rrq->flags & IW_RETRY_TYPE) { -+ case IW_RETRY_LIFETIME: -+ return -EOPNOTSUPP; -+ break; -+ case IW_RETRY_LIMIT: -+ rrq->flags = IW_RETRY_LIMIT; -+ switch (rrq->flags & IW_RETRY_MODIFIER) { -+ case IW_RETRY_MIN: -+ rrq->flags |= IW_RETRY_MIN; -+ rrq->value = WMI_MIN_RETRIES; -+ break; -+ case IW_RETRY_MAX: -+ rrq->flags |= IW_RETRY_MAX; -+ rrq->value = ar->arMaxRetries; -+ break; -+ } -+ break; -+ } -+ return 0; -+} -+ -+/* -+ * SIOCSIWENCODE -+ */ -+static int -+ar6000_ioctl_siwencode(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *erq, char *keybuf) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ int index; -+ A_INT32 auth = ar->arDot11AuthMode; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ index = erq->flags & IW_ENCODE_INDEX; -+ -+ if (index && (((index - 1) < WMI_MIN_KEY_INDEX) || -+ ((index - 1) > WMI_MAX_KEY_INDEX))) -+ { -+ return -EIO; -+ } -+ -+ if (erq->flags & IW_ENCODE_DISABLED) { -+ /* -+ * Encryption disabled -+ */ -+ if (index) { -+ /* -+ * If key index was specified then clear the specified key -+ */ -+ index--; -+ A_MEMZERO(ar->arWepKeyList[index].arKey, -+ sizeof(ar->arWepKeyList[index].arKey)); -+ ar->arWepKeyList[index].arKeyLen = 0; -+ } -+ ar->arDot11AuthMode = OPEN_AUTH; -+ ar->arPairwiseCrypto = NONE_CRYPT; -+ ar->arGroupCrypto = NONE_CRYPT; -+ ar->arAuthMode = NONE_AUTH; -+ } else { -+ /* -+ * Enabling WEP encryption -+ */ -+ if (index) { -+ index--; /* keyindex is off base 1 in iwconfig */ -+ } -+ -+ if (erq->flags & IW_ENCODE_OPEN) { -+ auth = OPEN_AUTH; -+ } else if (erq->flags & IW_ENCODE_RESTRICTED) { -+ auth = SHARED_AUTH; -+ } -+ -+ if (erq->length) { -+ if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(erq->length)) { -+ return -EIO; -+ } -+ -+ A_MEMZERO(ar->arWepKeyList[index].arKey, -+ sizeof(ar->arWepKeyList[index].arKey)); -+ A_MEMCPY(ar->arWepKeyList[index].arKey, keybuf, erq->length); -+ ar->arWepKeyList[index].arKeyLen = erq->length; -+ } else { -+ if (ar->arWepKeyList[index].arKeyLen == 0) { -+ return -EIO; -+ } -+ ar->arDefTxKeyIndex = index; -+ } -+ -+ ar->arPairwiseCrypto = WEP_CRYPT; -+ ar->arGroupCrypto = WEP_CRYPT; -+ ar->arDot11AuthMode = auth; -+ ar->arAuthMode = NONE_AUTH; -+ } -+ -+ /* -+ * profile has changed. Erase ssid to signal change -+ */ -+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); -+ ar->arSsidLen = 0; -+ -+ return 0; -+} -+ -+static int -+ar6000_ioctl_giwencode(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *erq, char *key) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); -+ A_UINT8 keyIndex; -+ struct ar_wep_key *wk; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (ar->arPairwiseCrypto == NONE_CRYPT) { -+ erq->length = 0; -+ erq->flags = IW_ENCODE_DISABLED; -+ } else { -+ /* get the keyIndex */ -+ keyIndex = erq->flags & IW_ENCODE_INDEX; -+ if (0 == keyIndex) { -+ keyIndex = ar->arDefTxKeyIndex; -+ } else if ((keyIndex - 1 < WMI_MIN_KEY_INDEX) || -+ (keyIndex - 1 > WMI_MAX_KEY_INDEX)) -+ { -+ keyIndex = WMI_MIN_KEY_INDEX; -+ } else { -+ keyIndex--; -+ } -+ erq->flags = keyIndex + 1; -+ erq->flags |= IW_ENCODE_ENABLED; -+ wk = &ar->arWepKeyList[keyIndex]; -+ if (erq->length > wk->arKeyLen) { -+ erq->length = wk->arKeyLen; -+ } -+ if (wk->arKeyLen) { -+ A_MEMCPY(key, wk->arKey, erq->length); -+ } -+ if (ar->arDot11AuthMode == OPEN_AUTH) { -+ erq->flags |= IW_ENCODE_OPEN; -+ } else if (ar->arDot11AuthMode == SHARED_AUTH) { -+ erq->flags |= IW_ENCODE_RESTRICTED; -+ } -+ } -+ -+ return 0; -+} -+ -+static int ar6000_ioctl_siwpower(struct net_device *dev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); -+ WMI_POWER_MODE power_mode; -+ -+ if (wrqu->power.disabled) -+ power_mode = MAX_PERF_POWER; -+ else -+ power_mode = REC_POWER; -+ -+ if (wmi_powermode_cmd(ar->arWmi, power_mode) < 0) -+ return -EIO; -+ -+ return 0; -+} -+ -+static int ar6000_ioctl_giwpower(struct net_device *dev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); -+ -+ return wmi_get_power_mode_cmd(ar->arWmi); -+} -+ -+static int ar6000_ioctl_siwgenie(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *dwrq, -+ char *extra) -+{ -+ /* The target does that for us */ -+ return 0; -+} -+ -+static int ar6000_ioctl_giwgenie(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *dwrq, -+ char *extra) -+{ -+ return 0; -+} -+ -+static int ar6000_ioctl_siwauth(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *param, -+ char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); -+ int reset = 0; -+ -+ switch (param->flags & IW_AUTH_INDEX) { -+ case IW_AUTH_WPA_VERSION: -+ if (param->value & IW_AUTH_WPA_VERSION_DISABLED) { -+ ar->arAuthMode = NONE_AUTH; -+ } -+ if (param->value & IW_AUTH_WPA_VERSION_WPA) { -+ ar->arAuthMode = WPA_AUTH; -+ } -+ if (param->value & IW_AUTH_WPA_VERSION_WPA2) { -+ ar->arAuthMode = WPA2_AUTH; -+ } -+ -+ reset = 1; -+ break; -+ case IW_AUTH_CIPHER_PAIRWISE: -+ if (param->value & IW_AUTH_CIPHER_NONE) { -+ ar->arPairwiseCrypto = NONE_CRYPT; -+ } -+ if (param->value & IW_AUTH_CIPHER_WEP40) { -+ ar->arPairwiseCrypto = WEP_CRYPT; -+ } -+ if (param->value & IW_AUTH_CIPHER_TKIP) { -+ ar->arPairwiseCrypto = TKIP_CRYPT; -+ } -+ if (param->value & IW_AUTH_CIPHER_CCMP) { -+ ar->arPairwiseCrypto = AES_CRYPT; -+ } -+ -+ reset = 1; -+ break; -+ case IW_AUTH_CIPHER_GROUP: -+ if (param->value & IW_AUTH_CIPHER_NONE) { -+ ar->arGroupCrypto = NONE_CRYPT; -+ } -+ if (param->value & IW_AUTH_CIPHER_WEP40) { -+ ar->arGroupCrypto = WEP_CRYPT; -+ } -+ if (param->value & IW_AUTH_CIPHER_TKIP) { -+ ar->arGroupCrypto = TKIP_CRYPT; -+ } -+ if (param->value & IW_AUTH_CIPHER_CCMP) { -+ ar->arGroupCrypto = AES_CRYPT; -+ } -+ -+ reset = 1; -+ break; -+ case IW_AUTH_KEY_MGMT: -+ if (param->value & IW_AUTH_KEY_MGMT_PSK) { -+ if (ar->arAuthMode == WPA_AUTH) { -+ ar->arAuthMode = WPA_PSK_AUTH; -+ } else if (ar->arAuthMode == WPA2_AUTH) { -+ ar->arAuthMode = WPA2_PSK_AUTH; -+ } -+ -+ reset = 1; -+ } -+ break; -+ -+ case IW_AUTH_TKIP_COUNTERMEASURES: -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ wmi_set_tkip_countermeasures_cmd(ar->arWmi, param->value); -+ break; -+ -+ case IW_AUTH_DROP_UNENCRYPTED: -+ break; -+ -+ case IW_AUTH_80211_AUTH_ALG: -+ if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) { -+ ar->arDot11AuthMode = OPEN_AUTH; -+ } -+ if (param->value & IW_AUTH_ALG_SHARED_KEY) { -+ ar->arDot11AuthMode = SHARED_AUTH; -+ } -+ if (param->value & IW_AUTH_ALG_LEAP) { -+ ar->arDot11AuthMode = LEAP_AUTH; -+ ar->arPairwiseCrypto = WEP_CRYPT; -+ ar->arGroupCrypto = WEP_CRYPT; -+ } -+ -+ reset = 1; -+ break; -+ -+ case IW_AUTH_WPA_ENABLED: -+ reset = 1; -+ break; -+ -+ case IW_AUTH_RX_UNENCRYPTED_EAPOL: -+ break; -+ -+ case IW_AUTH_PRIVACY_INVOKED: -+ break; -+ -+ default: -+ printk("%s(): Unknown flag 0x%x\n", __FUNCTION__, param->flags); -+ return -EOPNOTSUPP; -+ } -+ -+ if (reset) { -+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); -+ ar->arSsidLen = 0; -+ } -+ -+ return 0; -+} -+ -+static int ar6000_ioctl_giwauth(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *dwrq, -+ char *extra) -+{ -+ return 0; -+} -+ -+static int ar6000_ioctl_siwencodeext(struct net_device *dev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); -+ struct iw_point *encoding = &wrqu->encoding; -+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; -+ int alg = ext->alg, idx; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ /* Determine and validate the key index */ -+ idx = (encoding->flags & IW_ENCODE_INDEX) - 1; -+ if (idx) { -+ if (idx < 0 || idx > 3) -+ return -EINVAL; -+ } -+ -+ if ((alg == IW_ENCODE_ALG_TKIP) || (alg == IW_ENCODE_ALG_CCMP)) { -+ struct ieee80211req_key ik; -+ KEY_USAGE key_usage; -+ CRYPTO_TYPE key_type = NONE_CRYPT; -+ int status; -+ -+ ar->user_saved_keys.keyOk = FALSE; -+ -+ if (alg == IW_ENCODE_ALG_TKIP) { -+ key_type = TKIP_CRYPT; -+ ik.ik_type = IEEE80211_CIPHER_TKIP; -+ } else { -+ key_type = AES_CRYPT; -+ ik.ik_type = IEEE80211_CIPHER_AES_CCM; -+ } -+ -+ ik.ik_keyix = idx; -+ ik.ik_keylen = ext->key_len; -+ ik.ik_flags = IEEE80211_KEY_RECV; -+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { -+ ik.ik_flags |= IEEE80211_KEY_XMIT -+ | IEEE80211_KEY_DEFAULT; -+ } -+ -+ if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) { -+ memcpy(&ik.ik_keyrsc, ext->rx_seq, 8); -+ } -+ -+ memcpy(ik.ik_keydata, ext->key, ext->key_len); -+ -+ ar->user_saved_keys.keyType = key_type; -+ if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) { -+ key_usage = GROUP_USAGE; -+ memset(ik.ik_macaddr, 0, ETH_ALEN); -+ memcpy(&ar->user_saved_keys.bcast_ik, &ik, -+ sizeof(struct ieee80211req_key)); -+ } else { -+ key_usage = PAIRWISE_USAGE; -+ memcpy(ik.ik_macaddr, ext->addr.sa_data, ETH_ALEN); -+ memcpy(&ar->user_saved_keys.ucast_ik, &ik, -+ sizeof(struct ieee80211req_key)); -+ } -+ -+ status = wmi_addKey_cmd(ar->arWmi, ik.ik_keyix, key_type, -+ key_usage, ik.ik_keylen, -+ (A_UINT8 *)&ik.ik_keyrsc, -+ ik.ik_keydata, -+ KEY_OP_INIT_VAL, SYNC_BEFORE_WMIFLAG); -+ -+ if (status < 0) -+ return -EIO; -+ -+ ar->user_saved_keys.keyOk = TRUE; -+ -+ return 0; -+ -+ } else { -+ /* WEP falls back to SIWENCODE */ -+ return -EOPNOTSUPP; -+ } -+ -+ return 0; -+} -+ -+ -+static int ar6000_ioctl_giwencodeext(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *dwrq, -+ char *extra) -+{ -+ return 0; -+} -+ -+ -+static int -+ar6000_ioctl_setparam(struct net_device *dev, -+ struct iw_request_info *info, -+ void *erq, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ int *i = (int *)extra; -+ int param = i[0]; -+ int value = i[1]; -+ int ret = 0; -+ A_BOOL profChanged = FALSE; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ switch (param) { -+ case IEEE80211_PARAM_WPA: -+ switch (value) { -+ case WPA_MODE_WPA1: -+ ar->arAuthMode = WPA_AUTH; -+ profChanged = TRUE; -+ break; -+ case WPA_MODE_WPA2: -+ ar->arAuthMode = WPA2_AUTH; -+ profChanged = TRUE; -+ break; -+ case WPA_MODE_NONE: -+ ar->arAuthMode = NONE_AUTH; -+ profChanged = TRUE; -+ break; -+ default: -+ printk("IEEE80211_PARAM_WPA: Unknown value %d\n", value); -+ } -+ break; -+ case IEEE80211_PARAM_AUTHMODE: -+ switch(value) { -+ case IEEE80211_AUTH_WPA_PSK: -+ if (WPA_AUTH == ar->arAuthMode) { -+ ar->arAuthMode = WPA_PSK_AUTH; -+ profChanged = TRUE; -+ } else if (WPA2_AUTH == ar->arAuthMode) { -+ ar->arAuthMode = WPA2_PSK_AUTH; -+ profChanged = TRUE; -+ } else { -+ AR_DEBUG_PRINTF("Error - Setting PSK mode when WPA "\ -+ "param was set to %d\n", -+ ar->arAuthMode); -+ ret = -1; -+ } -+ break; -+ case IEEE80211_AUTH_WPA_CCKM: -+ if (WPA2_AUTH == ar->arAuthMode) { -+ ar->arAuthMode = WPA2_AUTH_CCKM; -+ } else { -+ ar->arAuthMode = WPA_AUTH_CCKM; -+ } -+ break; -+ default: -+ break; -+ } -+ break; -+ case IEEE80211_PARAM_UCASTCIPHER: -+ switch (value) { -+ case IEEE80211_CIPHER_AES_CCM: -+ ar->arPairwiseCrypto = AES_CRYPT; -+ profChanged = TRUE; -+ break; -+ case IEEE80211_CIPHER_TKIP: -+ ar->arPairwiseCrypto = TKIP_CRYPT; -+ profChanged = TRUE; -+ break; -+ case IEEE80211_CIPHER_WEP: -+ ar->arPairwiseCrypto = WEP_CRYPT; -+ profChanged = TRUE; -+ break; -+ case IEEE80211_CIPHER_NONE: -+ ar->arPairwiseCrypto = NONE_CRYPT; -+ profChanged = TRUE; -+ break; -+ } -+ break; -+ case IEEE80211_PARAM_UCASTKEYLEN: -+ if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) { -+ ret = -EIO; -+ } else { -+ ar->arPairwiseCryptoLen = value; -+ } -+ break; -+ case IEEE80211_PARAM_MCASTCIPHER: -+ switch (value) { -+ case IEEE80211_CIPHER_AES_CCM: -+ ar->arGroupCrypto = AES_CRYPT; -+ profChanged = TRUE; -+ break; -+ case IEEE80211_CIPHER_TKIP: -+ ar->arGroupCrypto = TKIP_CRYPT; -+ profChanged = TRUE; -+ break; -+ case IEEE80211_CIPHER_WEP: -+ ar->arGroupCrypto = WEP_CRYPT; -+ profChanged = TRUE; -+ break; -+ case IEEE80211_CIPHER_NONE: -+ ar->arGroupCrypto = NONE_CRYPT; -+ profChanged = TRUE; -+ break; -+ } -+ break; -+ case IEEE80211_PARAM_MCASTKEYLEN: -+ if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) { -+ ret = -EIO; -+ } else { -+ ar->arGroupCryptoLen = value; -+ } -+ break; -+ case IEEE80211_PARAM_COUNTERMEASURES: -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ wmi_set_tkip_countermeasures_cmd(ar->arWmi, value); -+ break; -+ default: -+ break; -+ } -+ -+ if (profChanged == TRUE) { -+ /* -+ * profile has changed. Erase ssid to signal change -+ */ -+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); -+ ar->arSsidLen = 0; -+ } -+ -+ return ret; -+} -+ -+int -+ar6000_ioctl_getparam(struct net_device *dev, struct iw_request_info *info, -+ void *w, char *extra) -+{ -+ return -EIO; /* for now */ -+} -+ -+int -+ar6000_ioctl_setkey(struct net_device *dev, struct iw_request_info *info, -+ void *w, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ struct ieee80211req_key *ik = (struct ieee80211req_key *)extra; -+ KEY_USAGE keyUsage; -+ A_STATUS status; -+ CRYPTO_TYPE keyType = NONE_CRYPT; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ ar->user_saved_keys.keyOk = FALSE; -+ -+ if ( 0 == memcmp(ik->ik_macaddr, "\x00\x00\x00\x00\x00\x00", -+ IEEE80211_ADDR_LEN)) { -+ keyUsage = GROUP_USAGE; -+ A_MEMCPY(&ar->user_saved_keys.bcast_ik, ik, -+ sizeof(struct ieee80211req_key)); -+ } else { -+ keyUsage = PAIRWISE_USAGE; -+ A_MEMCPY(&ar->user_saved_keys.ucast_ik, ik, -+ sizeof(struct ieee80211req_key)); -+ } -+ -+ switch (ik->ik_type) { -+ case IEEE80211_CIPHER_WEP: -+ keyType = WEP_CRYPT; -+ break; -+ case IEEE80211_CIPHER_TKIP: -+ keyType = TKIP_CRYPT; -+ break; -+ case IEEE80211_CIPHER_AES_CCM: -+ keyType = AES_CRYPT; -+ break; -+ default: -+ break; -+ } -+ ar->user_saved_keys.keyType = keyType; -+ -+ if (IEEE80211_CIPHER_CCKM_KRK != ik->ik_type) { -+ if (NONE_CRYPT == keyType) { -+ return -EIO; -+ } -+ -+ status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, keyUsage, -+ ik->ik_keylen, (A_UINT8 *)&ik->ik_keyrsc, -+ ik->ik_keydata, KEY_OP_INIT_VAL, -+ SYNC_BEFORE_WMIFLAG); -+ -+ if (status != A_OK) { -+ return -EIO; -+ } -+ } else { -+ status = wmi_add_krk_cmd(ar->arWmi, ik->ik_keydata); -+ } -+ -+ ar->user_saved_keys.keyOk = TRUE; -+ -+ return 0; -+} -+ -+ -+/* -+ * SIOCGIWNAME -+ */ -+int -+ar6000_ioctl_giwname(struct net_device *dev, -+ struct iw_request_info *info, -+ char *name, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ switch (ar->arPhyCapability) { -+ case (WMI_11A_CAPABILITY): -+ strncpy(name, "AR6000 802.11a", IFNAMSIZ); -+ break; -+ case (WMI_11G_CAPABILITY): -+ strncpy(name, "AR6000 802.11g", IFNAMSIZ); -+ break; -+ case (WMI_11AG_CAPABILITY): -+ strncpy(name, "AR6000 802.11ag", IFNAMSIZ); -+ break; -+ default: -+ strncpy(name, "AR6000 802.11", IFNAMSIZ); -+ break; -+ } -+ -+ return 0; -+} -+ -+/* -+ * SIOCSIWFREQ -+ */ -+int -+ar6000_ioctl_siwfreq(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_freq *freq, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ /* -+ * We support limiting the channels via wmiconfig. -+ * -+ * We use this command to configure the channel hint for the connect cmd -+ * so it is possible the target will end up connecting to a different -+ * channel. -+ */ -+ if (freq->e > 1) { -+ return -EINVAL; -+ } else if (freq->e == 1) { -+ ar->arChannelHint = freq->m / 100000; -+ } else { -+ ar->arChannelHint = wlan_ieee2freq(freq->m); -+ } -+ -+ A_PRINTF("channel hint set to %d\n", ar->arChannelHint); -+ return 0; -+} -+ -+/* -+ * SIOCGIWFREQ -+ */ -+int -+ar6000_ioctl_giwfreq(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_freq *freq, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (ar->arConnected != TRUE) { -+ return -EINVAL; -+ } -+ -+ freq->m = ar->arBssChannel * 100000; -+ freq->e = 1; -+ -+ return 0; -+} -+ -+/* -+ * SIOCSIWMODE -+ */ -+int -+ar6000_ioctl_siwmode(struct net_device *dev, -+ struct iw_request_info *info, -+ __u32 *mode, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ switch (*mode) { -+ case IW_MODE_INFRA: -+ ar->arNetworkType = INFRA_NETWORK; -+ break; -+ case IW_MODE_ADHOC: -+ ar->arNetworkType = ADHOC_NETWORK; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/* -+ * SIOCGIWMODE -+ */ -+int -+ar6000_ioctl_giwmode(struct net_device *dev, -+ struct iw_request_info *info, -+ __u32 *mode, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ switch (ar->arNetworkType) { -+ case INFRA_NETWORK: -+ *mode = IW_MODE_INFRA; -+ break; -+ case ADHOC_NETWORK: -+ *mode = IW_MODE_ADHOC; -+ break; -+ default: -+ return -EIO; -+ } -+ return 0; -+} -+ -+/* -+ * SIOCSIWSENS -+ */ -+int -+ar6000_ioctl_siwsens(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *sens, char *extra) -+{ -+ return 0; -+} -+ -+/* -+ * SIOCGIWSENS -+ */ -+int -+ar6000_ioctl_giwsens(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_param *sens, char *extra) -+{ -+ sens->value = 0; -+ sens->fixed = 1; -+ -+ return 0; -+} -+ -+/* -+ * SIOCGIWRANGE -+ */ -+int -+ar6000_ioctl_giwrange(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *data, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ struct iw_range *range = (struct iw_range *) extra; -+ int i, ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (down_interruptible(&ar->arSem)) { -+ return -ERESTARTSYS; -+ } -+ ar->arNumChannels = -1; -+ A_MEMZERO(ar->arChannelList, sizeof (ar->arChannelList)); -+ -+ if (wmi_get_channelList_cmd(ar->arWmi) != A_OK) { -+ up(&ar->arSem); -+ return -EIO; -+ } -+ -+ wait_event_interruptible_timeout(arEvent, ar->arNumChannels != -1, wmitimeout * HZ); -+ -+ if (signal_pending(current)) { -+ up(&ar->arSem); -+ return -EINTR; -+ } -+ -+ data->length = sizeof(struct iw_range); -+ A_MEMZERO(range, sizeof(struct iw_range)); -+ -+ range->txpower_capa = IW_TXPOW_DBM; -+ -+ range->min_pmp = 1 * 1024; -+ range->max_pmp = 65535 * 1024; -+ range->min_pmt = 1 * 1024; -+ range->max_pmt = 1000 * 1024; -+ range->pmp_flags = IW_POWER_PERIOD; -+ range->pmt_flags = IW_POWER_TIMEOUT; -+ range->pm_capa = 0; -+ -+ range->we_version_compiled = WIRELESS_EXT; -+ range->we_version_source = 13; -+ -+ range->retry_capa = IW_RETRY_LIMIT; -+ range->retry_flags = IW_RETRY_LIMIT; -+ range->min_retry = 0; -+ range->max_retry = 255; -+ -+ range->num_frequency = range->num_channels = ar->arNumChannels; -+ for (i = 0; i < ar->arNumChannels; i++) { -+ range->freq[i].i = wlan_freq2ieee(ar->arChannelList[i]); -+ range->freq[i].m = ar->arChannelList[i] * 100000; -+ range->freq[i].e = 1; -+ /* -+ * Linux supports max of 32 channels, bail out once you -+ * reach the max. -+ */ -+ if (i == IW_MAX_FREQUENCIES) { -+ break; -+ } -+ } -+ -+ /* Max quality is max field value minus noise floor */ -+ range->max_qual.qual = 0xff - 161; -+ -+ /* -+ * In order to use dBm measurements, 'level' must be lower -+ * than any possible measurement (see iw_print_stats() in -+ * wireless tools). It's unclear how this is meant to be -+ * done, but setting zero in these values forces dBm and -+ * the actual numbers are not used. -+ */ -+ range->max_qual.level = 0; -+ range->max_qual.noise = 0; -+ -+ range->sensitivity = 3; -+ -+ range->max_encoding_tokens = 4; -+ /* XXX query driver to find out supported key sizes */ -+ range->num_encoding_sizes = 3; -+ range->encoding_size[0] = 5; /* 40-bit */ -+ range->encoding_size[1] = 13; /* 104-bit */ -+ range->encoding_size[2] = 16; /* 128-bit */ -+ -+ range->num_bitrates = 0; -+ -+ /* estimated maximum TCP throughput values (bps) */ -+ range->throughput = 22000000; -+ -+ range->min_rts = 0; -+ range->max_rts = 2347; -+ range->min_frag = 256; -+ range->max_frag = 2346; -+ -+ up(&ar->arSem); -+ -+ return ret; -+} -+ -+ -+/* -+ * SIOCSIWAP -+ * This ioctl is used to set the desired bssid for the connect command. -+ */ -+int -+ar6000_ioctl_siwap(struct net_device *dev, -+ struct iw_request_info *info, -+ struct sockaddr *ap_addr, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (ap_addr->sa_family != ARPHRD_ETHER) { -+ return -EIO; -+ } -+ -+ if (A_MEMCMP(&ap_addr->sa_data, bcast_mac, AR6000_ETH_ADDR_LEN) == 0) { -+ A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); -+ } else { -+ A_MEMCPY(ar->arReqBssid, &ap_addr->sa_data, sizeof(ar->arReqBssid)); -+ } -+ -+ return 0; -+} -+ -+/* -+ * SIOCGIWAP -+ */ -+int -+ar6000_ioctl_giwap(struct net_device *dev, -+ struct iw_request_info *info, -+ struct sockaddr *ap_addr, char *extra) -+{ -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ if (ar->arConnected != TRUE) { -+ return -EINVAL; -+ } -+ -+ A_MEMCPY(&ap_addr->sa_data, ar->arBssid, sizeof(ar->arBssid)); -+ ap_addr->sa_family = ARPHRD_ETHER; -+ -+ return 0; -+} -+ -+/* -+ * SIOCGIWAPLIST -+ */ -+int -+ar6000_ioctl_iwaplist(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *data, char *extra) -+{ -+ return -EIO; /* for now */ -+} -+ -+/* -+ * SIOCSIWSCAN -+ */ -+int -+ar6000_ioctl_siwscan(struct net_device *dev, -+ struct iw_request_info *info, -+ struct iw_point *data, char *extra) -+{ -+#define ACT_DWELLTIME_DEFAULT 105 -+#define HOME_TXDRAIN_TIME 100 -+#define SCAN_INT HOME_TXDRAIN_TIME + ACT_DWELLTIME_DEFAULT -+ AR_SOFTC_T *ar = (AR_SOFTC_T *)dev->priv; -+ int ret = 0; -+ -+ if (ar->arWmiReady == FALSE) { -+ return -EIO; -+ } -+ -+ if (ar->arWlanState == WLAN_DISABLED) { -+ return -EIO; -+ } -+ -+ /* We ask for everything from the target */ -+ if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != A_OK) { -+ printk("Couldn't set filtering\n"); -+ ret = -EIO; -+ } -+ -+ if (wmi_startscan_cmd(ar->arWmi, WMI_LONG_SCAN, FALSE, FALSE, \ -+ HOME_TXDRAIN_TIME, SCAN_INT) != A_OK) { -+ ret = -EIO; -+ } -+ -+ ar->scan_complete = 0; -+ wait_event_interruptible_timeout(ar6000_scan_queue, ar->scan_complete, -+ 5 * HZ); -+ -+ if (wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0) != A_OK) { -+ printk("Couldn't set filtering\n"); -+ ret = -EIO; -+ } -+ -+ return ret; -+#undef ACT_DWELLTIME_DEFAULT -+#undef HOME_TXDRAIN_TIME -+#undef SCAN_INT -+} -+ -+ -+/* -+ * Units are in db above the noise floor. That means the -+ * rssi values reported in the tx/rx descriptors in the -+ * driver are the SNR expressed in db. -+ * -+ * If you assume that the noise floor is -95, which is an -+ * excellent assumption 99.5 % of the time, then you can -+ * derive the absolute signal level (i.e. -95 + rssi). -+ * There are some other slight factors to take into account -+ * depending on whether the rssi measurement is from 11b, -+ * 11g, or 11a. These differences are at most 2db and -+ * can be documented. -+ * -+ * NB: various calculations are based on the orinoco/wavelan -+ * drivers for compatibility -+ */ -+static void -+ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi) -+{ -+ if (rssi < 0) { -+ iq->qual = 0; -+ } else { -+ iq->qual = rssi; -+ } -+ -+ /* NB: max is 94 because noise is hardcoded to 161 */ -+ if (iq->qual > 94) -+ iq->qual = 94; -+ -+ iq->noise = 161; /* -95dBm */ -+ iq->level = iq->noise + iq->qual; -+ iq->updated = 7; -+} -+ -+ -+/* Structures to export the Wireless Handlers */ -+static const iw_handler ath_handlers[] = { -+ (iw_handler) NULL, /* SIOCSIWCOMMIT */ -+ (iw_handler) ar6000_ioctl_giwname, /* SIOCGIWNAME */ -+ (iw_handler) NULL, /* SIOCSIWNWID */ -+ (iw_handler) NULL, /* SIOCGIWNWID */ -+ (iw_handler) ar6000_ioctl_siwfreq, /* SIOCSIWFREQ */ -+ (iw_handler) ar6000_ioctl_giwfreq, /* SIOCGIWFREQ */ -+ (iw_handler) ar6000_ioctl_siwmode, /* SIOCSIWMODE */ -+ (iw_handler) ar6000_ioctl_giwmode, /* SIOCGIWMODE */ -+ (iw_handler) ar6000_ioctl_siwsens, /* SIOCSIWSENS */ -+ (iw_handler) ar6000_ioctl_giwsens, /* SIOCGIWSENS */ -+ (iw_handler) NULL /* not _used */, /* SIOCSIWRANGE */ -+ (iw_handler) ar6000_ioctl_giwrange, /* SIOCGIWRANGE */ -+ (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */ -+ (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */ -+ (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */ -+ (iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */ -+ (iw_handler) NULL, /* SIOCSIWSPY */ -+ (iw_handler) NULL, /* SIOCGIWSPY */ -+ (iw_handler) NULL, /* SIOCSIWTHRSPY */ -+ (iw_handler) NULL, /* SIOCGIWTHRSPY */ -+ (iw_handler) ar6000_ioctl_siwap, /* SIOCSIWAP */ -+ (iw_handler) ar6000_ioctl_giwap, /* SIOCGIWAP */ -+ (iw_handler) NULL, /* -- hole -- */ -+ (iw_handler) ar6000_ioctl_iwaplist, /* SIOCGIWAPLIST */ -+ (iw_handler) ar6000_ioctl_siwscan, /* SIOCSIWSCAN */ -+ (iw_handler) ar6000_ioctl_giwscan, /* SIOCGIWSCAN */ -+ (iw_handler) ar6000_ioctl_siwessid, /* SIOCSIWESSID */ -+ (iw_handler) ar6000_ioctl_giwessid, /* SIOCGIWESSID */ -+ (iw_handler) NULL, /* SIOCSIWNICKN */ -+ (iw_handler) NULL, /* SIOCGIWNICKN */ -+ (iw_handler) NULL, /* -- hole -- */ -+ (iw_handler) NULL, /* -- hole -- */ -+ (iw_handler) ar6000_ioctl_siwrate, /* SIOCSIWRATE */ -+ (iw_handler) ar6000_ioctl_giwrate, /* SIOCGIWRATE */ -+ (iw_handler) NULL, /* SIOCSIWRTS */ -+ (iw_handler) NULL, /* SIOCGIWRTS */ -+ (iw_handler) NULL, /* SIOCSIWFRAG */ -+ (iw_handler) NULL, /* SIOCGIWFRAG */ -+ (iw_handler) ar6000_ioctl_siwtxpow, /* SIOCSIWTXPOW */ -+ (iw_handler) ar6000_ioctl_giwtxpow, /* SIOCGIWTXPOW */ -+ (iw_handler) ar6000_ioctl_siwretry, /* SIOCSIWRETRY */ -+ (iw_handler) ar6000_ioctl_giwretry, /* SIOCGIWRETRY */ -+ (iw_handler) ar6000_ioctl_siwencode, /* SIOCSIWENCODE */ -+ (iw_handler) ar6000_ioctl_giwencode, /* SIOCGIWENCODE */ -+ (iw_handler) ar6000_ioctl_siwpower, /* SIOCSIWPOWER */ -+ (iw_handler) ar6000_ioctl_giwpower, /* SIOCGIWPOWER */ -+ (iw_handler) NULL, /* -- hole -- */ -+ (iw_handler) NULL, /* -- hole -- */ -+ (iw_handler) ar6000_ioctl_siwgenie, /* SIOCSIWGENIE */ -+ (iw_handler) ar6000_ioctl_giwgenie, /* SIOCGIWGENIE */ -+ (iw_handler) ar6000_ioctl_siwauth, /* SIOCSIWAUTH */ -+ (iw_handler) ar6000_ioctl_giwauth, /* SIOCGIWAUTH */ -+ (iw_handler) ar6000_ioctl_siwencodeext,/* SIOCSIWENCODEEXT */ -+ (iw_handler) ar6000_ioctl_giwencodeext,/* SIOCGIWENCODEEXT */ -+ (iw_handler) NULL, /* SIOCSIWPMKSA */ -+}; -+ -+static const iw_handler ath_priv_handlers[] = { -+ (iw_handler) ar6000_ioctl_setparam, /* SIOCWFIRSTPRIV+0 */ -+ (iw_handler) ar6000_ioctl_getparam, /* SIOCWFIRSTPRIV+1 */ -+ (iw_handler) ar6000_ioctl_setkey, /* SIOCWFIRSTPRIV+2 */ -+ (iw_handler) ar6000_ioctl_setwmmparams, /* SIOCWFIRSTPRIV+3 */ -+ (iw_handler) ar6000_ioctl_delkey, /* SIOCWFIRSTPRIV+4 */ -+ (iw_handler) ar6000_ioctl_getwmmparams, /* SIOCWFIRSTPRIV+5 */ -+ (iw_handler) ar6000_ioctl_setoptie, /* SIOCWFIRSTPRIV+6 */ -+ (iw_handler) ar6000_ioctl_setmlme, /* SIOCWFIRSTPRIV+7 */ -+ (iw_handler) ar6000_ioctl_addpmkid, /* SIOCWFIRSTPRIV+8 */ -+}; -+ -+#define IW_PRIV_TYPE_KEY \ -+ (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_key)) -+#define IW_PRIV_TYPE_DELKEY \ -+ (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_del_key)) -+#define IW_PRIV_TYPE_MLME \ -+ (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_mlme)) -+#define IW_PRIV_TYPE_ADDPMKID \ -+ (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_addpmkid)) -+ -+static const struct iw_priv_args ar6000_priv_args[] = { -+ { IEEE80211_IOCTL_SETKEY, -+ IW_PRIV_TYPE_KEY | IW_PRIV_SIZE_FIXED, 0, "setkey"}, -+ { IEEE80211_IOCTL_DELKEY, -+ IW_PRIV_TYPE_DELKEY | IW_PRIV_SIZE_FIXED, 0, "delkey"}, -+ { IEEE80211_IOCTL_SETPARAM, -+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "setparam"}, -+ { IEEE80211_IOCTL_GETPARAM, -+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, -+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getparam"}, -+ { IEEE80211_IOCTL_SETWMMPARAMS, -+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, 0, "setwmmparams"}, -+ { IEEE80211_IOCTL_GETWMMPARAMS, -+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3, -+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwmmparams"}, -+ { IEEE80211_IOCTL_SETOPTIE, -+ IW_PRIV_TYPE_BYTE, 0, "setie"}, -+ { IEEE80211_IOCTL_SETMLME, -+ IW_PRIV_TYPE_MLME, 0, "setmlme"}, -+ { IEEE80211_IOCTL_ADDPMKID, -+ IW_PRIV_TYPE_ADDPMKID | IW_PRIV_SIZE_FIXED, 0, "addpmkid"}, -+}; -+ -+void ar6000_ioctl_iwsetup(struct iw_handler_def *def) -+{ -+ def->private_args = (struct iw_priv_args *)ar6000_priv_args; -+ def->num_private_args = ARRAY_SIZE(ar6000_priv_args); -+} -+ -+struct iw_handler_def ath_iw_handler_def = { -+ .standard = (iw_handler *)ath_handlers, -+ .num_standard = ARRAY_SIZE(ath_handlers), -+ .private = (iw_handler *)ath_priv_handlers, -+ .num_private = ARRAY_SIZE(ath_priv_handlers), -+}; -+ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/bmi/bmi.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/bmi/bmi.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,657 @@ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "hif.h" -+#include "bmi.h" -+#include "htc_api.h" -+#include "bmi_internal.h" -+ -+/* -+Although we had envisioned BMI to run on top of HTC, this is not what the -+final implementation boiled down to on dragon. Its a part of BSP and does -+not use the HTC protocol either. On the host side, however, we were still -+living with the original idea. I think the time has come to accept the truth -+and separate it from HTC which has been carrying BMI's burden all this while. -+It shall make HTC state machine relatively simpler -+*/ -+ -+/* APIs visible to the driver */ -+void -+BMIInit(void) -+{ -+ bmiDone = FALSE; -+} -+ -+A_STATUS -+BMIDone(HIF_DEVICE *device) -+{ -+ A_STATUS status; -+ A_UINT32 cid; -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n")); -+ return A_OK; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Enter (device: 0x%p)\n", device)); -+ bmiDone = TRUE; -+ cid = BMI_DONE; -+ -+ status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid)); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Exit\n")); -+ -+ return A_OK; -+} -+ -+A_STATUS -+BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info) -+{ -+ A_STATUS status; -+ A_UINT32 cid; -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device)); -+ cid = BMI_GET_TARGET_INFO; -+ -+ status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid)); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ -+ status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver, -+ sizeof(targ_info->target_ver)); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n")); -+ return A_ERROR; -+ } -+ -+ if (targ_info->target_ver == TARGET_VERSION_SENTINAL) { -+ /* Determine how many bytes are in the Target's targ_info */ -+ status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count, -+ sizeof(targ_info->target_info_byte_count)); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n")); -+ return A_ERROR; -+ } -+ -+ /* -+ * The Target's targ_info doesn't match the Host's targ_info. -+ * We need to do some backwards compatibility work to make this OK. -+ */ -+ A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info)); -+ -+ /* Read the remainder of the targ_info */ -+ status = bmiBufferReceive(device, -+ ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count), -+ sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count)); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n", -+ targ_info->target_info_byte_count)); -+ return A_ERROR; -+ } -+ } else { -+ /* -+ * Target must be an AR6001 whose firmware does not -+ * support BMI_GET_TARGET_INFO. Construct the data -+ * that it would have sent. -+ */ -+ targ_info->target_info_byte_count = sizeof(targ_info); -+ targ_info->target_type = TARGET_TYPE_AR6001; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n", -+ targ_info->target_ver, targ_info->target_type)); -+ printk("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n", -+ targ_info->target_ver, targ_info->target_type); -+ -+ return A_OK; -+} -+ -+A_STATUS -+BMIReadMemory(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UCHAR *buffer, -+ A_UINT32 length) -+{ -+ A_UINT32 cid; -+ A_STATUS status; -+ A_UINT32 offset; -+ A_UINT32 remaining, rxlen; -+ static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)]; -+ memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)); -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, -+ ("BMI Read Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n", -+ device, address, length)); -+ -+ cid = BMI_READ_MEMORY; -+ -+ remaining = length; -+ -+ while (remaining) -+ { -+ rxlen = (remaining < BMI_DATASZ_MAX) ? remaining : BMI_DATASZ_MAX; -+ offset = 0; -+ A_MEMCPY(&data[offset], &cid, sizeof(cid)); -+ offset += sizeof(cid); -+ A_MEMCPY(&data[offset], &address, sizeof(address)); -+ offset += sizeof(address); -+ A_MEMCPY(&data[offset], &rxlen, sizeof(rxlen)); -+ offset += sizeof(length); -+ -+ status = bmiBufferSend(device, data, offset); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ status = bmiBufferReceive(device, data, rxlen); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); -+ return A_ERROR; -+ } -+ A_MEMCPY(&buffer[length - remaining], data, rxlen); -+ remaining -= rxlen; address += rxlen; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read Memory: Exit\n")); -+ return A_OK; -+} -+ -+A_STATUS -+BMIWriteMemory(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UCHAR *buffer, -+ A_UINT32 length) -+{ -+ A_UINT32 cid; -+ A_STATUS status; -+ A_UINT32 offset; -+ A_UINT32 remaining, txlen; -+ const A_UINT32 header = sizeof(cid) + sizeof(address) + sizeof(length); -+ static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)]; -+ memset (&data, 0, header); -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, -+ ("BMI Write Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n", -+ device, address, length)); -+ -+ cid = BMI_WRITE_MEMORY; -+ -+ remaining = length; -+ while (remaining) -+ { -+ txlen = (remaining < (BMI_DATASZ_MAX - header)) ? -+ remaining : (BMI_DATASZ_MAX - header); -+ offset = 0; -+ A_MEMCPY(&data[offset], &cid, sizeof(cid)); -+ offset += sizeof(cid); -+ A_MEMCPY(&data[offset], &address, sizeof(address)); -+ offset += sizeof(address); -+ A_MEMCPY(&data[offset], &txlen, sizeof(txlen)); -+ offset += sizeof(txlen); -+ A_MEMCPY(&data[offset], &buffer[length - remaining], txlen); -+ offset += txlen; -+ status = bmiBufferSend(device, data, offset); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ remaining -= txlen; address += txlen; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Write Memory: Exit\n")); -+ -+ return A_OK; -+} -+ -+A_STATUS -+BMIExecute(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UINT32 *param) -+{ -+ A_UINT32 cid; -+ A_STATUS status; -+ A_UINT32 offset; -+ static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(*param)]; -+ memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(*param)); -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, -+ ("BMI Execute: Enter (device: 0x%p, address: 0x%x, param: %d)\n", -+ device, address, *param)); -+ -+ cid = BMI_EXECUTE; -+ -+ offset = 0; -+ A_MEMCPY(&data[offset], &cid, sizeof(cid)); -+ offset += sizeof(cid); -+ A_MEMCPY(&data[offset], &address, sizeof(address)); -+ offset += sizeof(address); -+ A_MEMCPY(&data[offset], param, sizeof(*param)); -+ offset += sizeof(*param); -+ status = bmiBufferSend(device, data, offset); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ -+ status = bmiBufferReceive(device, data, sizeof(*param)); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); -+ return A_ERROR; -+ } -+ -+ A_MEMCPY(param, data, sizeof(*param)); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Execute: Exit (param: %d)\n", *param)); -+ return A_OK; -+} -+ -+A_STATUS -+BMISetAppStart(HIF_DEVICE *device, -+ A_UINT32 address) -+{ -+ A_UINT32 cid; -+ A_STATUS status; -+ A_UINT32 offset; -+ static A_UCHAR data[sizeof(cid) + sizeof(address)]; -+ memset (&data, 0, sizeof(cid) + sizeof(address)); -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, -+ ("BMI Set App Start: Enter (device: 0x%p, address: 0x%x)\n", -+ device, address)); -+ -+ cid = BMI_SET_APP_START; -+ -+ offset = 0; -+ A_MEMCPY(&data[offset], &cid, sizeof(cid)); -+ offset += sizeof(cid); -+ A_MEMCPY(&data[offset], &address, sizeof(address)); -+ offset += sizeof(address); -+ status = bmiBufferSend(device, data, offset); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Set App Start: Exit\n")); -+ return A_OK; -+} -+ -+A_STATUS -+BMIReadSOCRegister(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UINT32 *param) -+{ -+ A_UINT32 cid; -+ A_STATUS status; -+ A_UINT32 offset; -+ static A_UCHAR data[sizeof(cid) + sizeof(address)]; -+ memset (&data, 0, sizeof(cid) + sizeof(address)); -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, -+ ("BMI Read SOC Register: Enter (device: 0x%p, address: 0x%x)\n", -+ device, address)); -+ -+ cid = BMI_READ_SOC_REGISTER; -+ -+ offset = 0; -+ A_MEMCPY(&data[offset], &cid, sizeof(cid)); -+ offset += sizeof(cid); -+ A_MEMCPY(&data[offset], &address, sizeof(address)); -+ offset += sizeof(address); -+ -+ status = bmiBufferSend(device, data, offset); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ -+ status = bmiBufferReceive(device, data, sizeof(*param)); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); -+ return A_ERROR; -+ } -+ A_MEMCPY(param, data, sizeof(*param)); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit (value: %d)\n", *param)); -+ return A_OK; -+} -+ -+A_STATUS -+BMIWriteSOCRegister(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UINT32 param) -+{ -+ A_UINT32 cid; -+ A_STATUS status; -+ A_UINT32 offset; -+ static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(param)]; -+ -+ memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(param)); -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, -+ ("BMI Write SOC Register: Enter (device: 0x%p, address: 0x%x, param: %d)\n", -+ device, address, param)); -+ -+ cid = BMI_WRITE_SOC_REGISTER; -+ -+ offset = 0; -+ A_MEMCPY(&data[offset], &cid, sizeof(cid)); -+ offset += sizeof(cid); -+ A_MEMCPY(&data[offset], &address, sizeof(address)); -+ offset += sizeof(address); -+ A_MEMCPY(&data[offset], ¶m, sizeof(param)); -+ offset += sizeof(param); -+ status = bmiBufferSend(device, data, offset); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit\n")); -+ return A_OK; -+} -+ -+A_STATUS -+BMIrompatchInstall(HIF_DEVICE *device, -+ A_UINT32 ROM_addr, -+ A_UINT32 RAM_addr, -+ A_UINT32 nbytes, -+ A_UINT32 do_activate, -+ A_UINT32 *rompatch_id) -+{ -+ A_UINT32 cid; -+ A_STATUS status; -+ A_UINT32 offset; -+ static A_UCHAR data[sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) + -+ sizeof(nbytes) + sizeof(do_activate)]; -+ -+ memset (&data, 0, sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) + -+ sizeof(nbytes) + sizeof(do_activate)); -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, -+ ("BMI rompatch Install: Enter (device: 0x%p, ROMaddr: 0x%x, RAMaddr: 0x%x length: %d activate: %d)\n", -+ device, ROM_addr, RAM_addr, nbytes, do_activate)); -+ -+ cid = BMI_ROMPATCH_INSTALL; -+ -+ offset = 0; -+ A_MEMCPY(&data[offset], &cid, sizeof(cid)); -+ offset += sizeof(cid); -+ A_MEMCPY(&data[offset], &ROM_addr, sizeof(ROM_addr)); -+ offset += sizeof(ROM_addr); -+ A_MEMCPY(&data[offset], &RAM_addr, sizeof(RAM_addr)); -+ offset += sizeof(RAM_addr); -+ A_MEMCPY(&data[offset], &nbytes, sizeof(nbytes)); -+ offset += sizeof(nbytes); -+ A_MEMCPY(&data[offset], &do_activate, sizeof(do_activate)); -+ offset += sizeof(do_activate); -+ status = bmiBufferSend(device, data, offset); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ -+ status = bmiBufferReceive(device, (A_UCHAR *)rompatch_id, sizeof(*rompatch_id)); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch Install: (rompatch_id=%d)\n", *rompatch_id)); -+ return A_OK; -+} -+ -+A_STATUS -+BMIrompatchUninstall(HIF_DEVICE *device, -+ A_UINT32 rompatch_id) -+{ -+ A_UINT32 cid; -+ A_STATUS status; -+ A_UINT32 offset; -+ static A_UCHAR data[sizeof(cid) + sizeof(rompatch_id)]; -+ memset (&data, 0, sizeof(cid) + sizeof(rompatch_id)); -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, -+ ("BMI rompatch Uninstall: Enter (device: 0x%p, rompatch_id: %d)\n", -+ device, rompatch_id)); -+ -+ cid = BMI_ROMPATCH_UNINSTALL; -+ -+ offset = 0; -+ A_MEMCPY(&data[offset], &cid, sizeof(cid)); -+ offset += sizeof(cid); -+ A_MEMCPY(&data[offset], &rompatch_id, sizeof(rompatch_id)); -+ offset += sizeof(rompatch_id); -+ status = bmiBufferSend(device, data, offset); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch UNinstall: (rompatch_id=0x%x)\n", rompatch_id)); -+ return A_OK; -+} -+ -+static A_STATUS -+_BMIrompatchChangeActivation(HIF_DEVICE *device, -+ A_UINT32 rompatch_count, -+ A_UINT32 *rompatch_list, -+ A_UINT32 do_activate) -+{ -+ A_UINT32 cid; -+ A_STATUS status; -+ A_UINT32 offset; -+ static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)]; -+ A_UINT32 length; -+ -+ memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)); -+ -+ if (bmiDone) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, -+ ("BMI Change rompatch Activation: Enter (device: 0x%p, count: %d)\n", -+ device, rompatch_count)); -+ -+ cid = do_activate ? BMI_ROMPATCH_ACTIVATE : BMI_ROMPATCH_DEACTIVATE; -+ -+ offset = 0; -+ A_MEMCPY(&data[offset], &cid, sizeof(cid)); -+ offset += sizeof(cid); -+ A_MEMCPY(&data[offset], &rompatch_count, sizeof(rompatch_count)); -+ offset += sizeof(rompatch_count); -+ length = rompatch_count * sizeof(*rompatch_list); -+ A_MEMCPY(&data[offset], rompatch_list, length); -+ offset += length; -+ status = bmiBufferSend(device, data, offset); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); -+ return A_ERROR; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Change rompatch Activation: Exit\n")); -+ -+ return A_OK; -+} -+ -+A_STATUS -+BMIrompatchActivate(HIF_DEVICE *device, -+ A_UINT32 rompatch_count, -+ A_UINT32 *rompatch_list) -+{ -+ return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 1); -+} -+ -+A_STATUS -+BMIrompatchDeactivate(HIF_DEVICE *device, -+ A_UINT32 rompatch_count, -+ A_UINT32 *rompatch_list) -+{ -+ return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 0); -+} -+ -+/* BMI Access routines */ -+A_STATUS -+bmiBufferSend(HIF_DEVICE *device, -+ A_UCHAR *buffer, -+ A_UINT32 length) -+{ -+ A_STATUS status; -+ A_UINT32 timeout; -+ A_UINT32 address; -+ static A_UINT32 cmdCredits; -+ A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX]; -+ -+ HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, -+ &mboxAddress, sizeof(mboxAddress)); -+ -+ cmdCredits = 0; -+ timeout = BMI_COMMUNICATION_TIMEOUT; -+ -+ while(timeout-- && !cmdCredits) { -+ /* Read the counter register to get the command credits */ -+ address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4; -+ /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause -+ * a decrement, while the remaining 3 bytes has no effect. The rationale behind this is to -+ * make all HIF accesses 4-byte aligned */ -+ status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, 4, -+ HIF_RD_SYNC_BYTE_INC, NULL); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n")); -+ return A_ERROR; -+ } -+ /* the counter is only 8=bits, ignore anything in the upper 3 bytes */ -+ cmdCredits &= 0xFF; -+ } -+ -+ if (cmdCredits) { -+ address = mboxAddress[ENDPOINT1]; -+ status = HIFReadWrite(device, address, buffer, length, -+ HIF_WR_SYNC_BYTE_INC, NULL); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n")); -+ return A_ERROR; -+ } -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout\n")); -+ return A_ERROR; -+ } -+ -+ return status; -+} -+ -+A_STATUS -+bmiBufferReceive(HIF_DEVICE *device, -+ A_UCHAR *buffer, -+ A_UINT32 length) -+{ -+ A_STATUS status; -+ A_UINT32 address; -+ A_UINT32 timeout; -+ static A_UINT32 cmdCredits; -+ A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX]; -+ -+ HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, -+ &mboxAddress, sizeof(mboxAddress)); -+ -+ cmdCredits = 0; -+ timeout = BMI_COMMUNICATION_TIMEOUT; -+ while(timeout-- && !cmdCredits) { -+ /* Read the counter register to get the command credits */ -+ address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1; -+ /* read the counter using a 4-byte read. Since the counter is NOT auto-decrementing, -+ * we can read this counter multiple times using a non-incrementing address mode. -+ * The rationale here is to make all HIF accesses a multiple of 4 bytes */ -+ status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, sizeof(cmdCredits), -+ HIF_RD_SYNC_BYTE_FIX, NULL); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n")); -+ return A_ERROR; -+ } -+ /* we did a 4-byte read to the same count register so mask off upper bytes */ -+ cmdCredits &= 0xFF; -+ status = A_ERROR; -+ } -+ -+ if (cmdCredits) { -+ address = mboxAddress[ENDPOINT1]; -+ status = HIFReadWrite(device, address, buffer, length, -+ HIF_RD_SYNC_BYTE_INC, NULL); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n")); -+ return A_ERROR; -+ } -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Communication timeout\n")); -+ return A_ERROR; -+ } -+ -+ return status; -+} -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/bmi/bmi_internal.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/bmi/bmi_internal.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,45 @@ -+#ifndef BMI_INTERNAL_H -+#define BMI_INTERNAL_H -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "a_osapi.h" -+#include "a_debug.h" -+#include "AR6Khwreg.h" -+#include "bmi_msg.h" -+ -+#define BMI_COMMUNICATION_TIMEOUT 100000 -+ -+/* ------ Global Variable Declarations ------- */ -+A_BOOL bmiDone; -+ -+A_STATUS -+bmiBufferSend(HIF_DEVICE *device, -+ A_UCHAR *buffer, -+ A_UINT32 length); -+ -+A_STATUS -+bmiBufferReceive(HIF_DEVICE *device, -+ A_UCHAR *buffer, -+ A_UINT32 length); -+ -+#endif -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/hif/hif.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/hif/hif.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,824 @@ -+/* -+ * @file: hif.c -+ * -+ * @abstract: HIF layer reference implementation for Atheros SDIO stack -+ * -+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "hif_internal.h" -+ -+/* ------ Static Variables ------ */ -+ -+/* ------ Global Variable Declarations ------- */ -+SD_PNP_INFO Ids[] = { -+ { -+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xB, -+ .SDIO_ManufacturerCode = MANUFACTURER_CODE, -+ .SDIO_FunctionClass = FUNCTION_CLASS, -+ .SDIO_FunctionNo = 1 -+ }, -+ { -+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xA, -+ .SDIO_ManufacturerCode = MANUFACTURER_CODE, -+ .SDIO_FunctionClass = FUNCTION_CLASS, -+ .SDIO_FunctionNo = 1 -+ }, -+ { -+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x9, -+ .SDIO_ManufacturerCode = MANUFACTURER_CODE, -+ .SDIO_FunctionClass = FUNCTION_CLASS, -+ .SDIO_FunctionNo = 1 -+ }, -+ { -+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x8, -+ .SDIO_ManufacturerCode = MANUFACTURER_CODE, -+ .SDIO_FunctionClass = FUNCTION_CLASS, -+ .SDIO_FunctionNo = 1 -+ }, -+ { -+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x0, -+ .SDIO_ManufacturerCode = MANUFACTURER_CODE, -+ .SDIO_FunctionClass = FUNCTION_CLASS, -+ .SDIO_FunctionNo = 1 -+ }, -+ { -+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x1, -+ .SDIO_ManufacturerCode = MANUFACTURER_CODE, -+ .SDIO_FunctionClass = FUNCTION_CLASS, -+ .SDIO_FunctionNo = 1 -+ }, -+ { -+ } //list is null termintaed -+}; -+ -+TARGET_FUNCTION_CONTEXT FunctionContext = { -+ .function.Version = CT_SDIO_STACK_VERSION_CODE, -+ .function.pName = "sdio_wlan", -+ .function.MaxDevices = 1, -+ .function.NumDevices = 0, -+ .function.pIds = Ids, -+ .function.pProbe = hifDeviceInserted, -+ .function.pRemove = hifDeviceRemoved, -+ .function.pSuspend = NULL, -+ .function.pResume = NULL, -+ .function.pWake = NULL, -+ .function.pContext = &FunctionContext, -+}; -+ -+HIF_DEVICE hifDevice[HIF_MAX_DEVICES]; -+HTC_CALLBACKS htcCallbacks; -+BUS_REQUEST busRequest[BUS_REQUEST_MAX_NUM]; -+static BUS_REQUEST *s_busRequestFreeQueue = NULL; -+OS_CRITICALSECTION lock; -+extern A_UINT32 onebitmode; -+extern A_UINT32 busspeedlow; -+ -+#ifdef DEBUG -+extern A_UINT32 debughif; -+#define ATH_DEBUG_ERROR 1 -+#define ATH_DEBUG_WARN 2 -+#define ATH_DEBUG_TRACE 3 -+#define _AR_DEBUG_PRINTX_ARG(arg...) arg -+#define AR_DEBUG_PRINTF(lvl, args)\ -+ {if (lvl <= debughif)\ -+ A_PRINTF(KERN_ALERT _AR_DEBUG_PRINTX_ARG args);\ -+ } -+#else -+#define AR_DEBUG_PRINTF(lvl, args) -+#endif -+ -+static BUS_REQUEST *hifAllocateBusRequest(void); -+static void hifFreeBusRequest(BUS_REQUEST *busrequest); -+static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper); -+static void ResetAllCards(void); -+ -+/* ------ Functions ------ */ -+int HIFInit(HTC_CALLBACKS *callbacks) -+{ -+ SDIO_STATUS status; -+ DBG_ASSERT(callbacks != NULL); -+ -+ /* Store the callback and event handlers */ -+ htcCallbacks.deviceInsertedHandler = callbacks->deviceInsertedHandler; -+ htcCallbacks.deviceRemovedHandler = callbacks->deviceRemovedHandler; -+ htcCallbacks.deviceSuspendHandler = callbacks->deviceSuspendHandler; -+ htcCallbacks.deviceResumeHandler = callbacks->deviceResumeHandler; -+ htcCallbacks.deviceWakeupHandler = callbacks->deviceWakeupHandler; -+ htcCallbacks.rwCompletionHandler = callbacks->rwCompletionHandler; -+ htcCallbacks.dsrHandler = callbacks->dsrHandler; -+ -+ CriticalSectionInit(&lock); -+ -+ /* Register with bus driver core */ -+ status = SDIO_RegisterFunction(&FunctionContext.function); -+ DBG_ASSERT(SDIO_SUCCESS(status)); -+ -+ return(0); -+} -+ -+A_STATUS -+HIFReadWrite(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UCHAR *buffer, -+ A_UINT32 length, -+ A_UINT32 request, -+ void *context) -+{ -+ A_UINT8 rw; -+ A_UINT8 mode; -+ A_UINT8 funcNo; -+ A_UINT8 opcode; -+ A_UINT16 count; -+ SDREQUEST *sdrequest; -+ SDIO_STATUS sdiostatus; -+ BUS_REQUEST *busrequest; -+ A_STATUS status = A_OK; -+ -+ DBG_ASSERT(device != NULL); -+ DBG_ASSERT(device->handle != NULL); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device)); -+ -+ do { -+ busrequest = hifAllocateBusRequest(); -+ if (busrequest == NULL) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("HIF Unable to allocate bus request\n")); -+ status = A_NO_RESOURCE; -+ break; -+ } -+ -+ sdrequest = busrequest->request; -+ busrequest->context = context; -+ -+ sdrequest->pDataBuffer = buffer; -+ if (request & HIF_SYNCHRONOUS) { -+ sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS; -+ sdrequest->pCompleteContext = NULL; -+ sdrequest->pCompletion = NULL; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Synchronous\n")); -+ } else if (request & HIF_ASYNCHRONOUS) { -+ sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS | -+ SDREQ_FLAGS_TRANS_ASYNC; -+ sdrequest->pCompleteContext = busrequest; -+ sdrequest->pCompletion = hifRWCompletionHandler; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Asynchronous\n")); -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Invalid execution mode: 0x%08x\n", request)); -+ status = A_EINVAL; -+ break; -+ } -+ -+ if (request & HIF_EXTENDED_IO) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Command type: CMD53\n")); -+ sdrequest->Command = CMD53; -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Invalid command type: 0x%08x\n", request)); -+ status = A_EINVAL; -+ break; -+ } -+ -+ if (request & HIF_BLOCK_BASIS) { -+ mode = CMD53_BLOCK_BASIS; -+ sdrequest->BlockLen = HIF_MBOX_BLOCK_SIZE; -+ sdrequest->BlockCount = length / HIF_MBOX_BLOCK_SIZE; -+ count = sdrequest->BlockCount; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, -+ ("Block mode (BlockLen: %d, BlockCount: %d)\n", -+ sdrequest->BlockLen, sdrequest->BlockCount)); -+ } else if (request & HIF_BYTE_BASIS) { -+ mode = CMD53_BYTE_BASIS; -+ sdrequest->BlockLen = length; -+ sdrequest->BlockCount = 1; -+ count = sdrequest->BlockLen; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, -+ ("Byte mode (BlockLen: %d, BlockCount: %d)\n", -+ sdrequest->BlockLen, sdrequest->BlockCount)); -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Invalid data mode: 0x%08x\n", request)); -+ status = A_EINVAL; -+ break; -+ } -+ -+#if 0 -+ /* useful for checking register accesses */ -+ if (length & 0x3) { -+ A_PRINTF(KERN_ALERT"HIF (%s) is not a multiple of 4 bytes, addr:0x%X, len:%d\n", -+ request & HIF_WRITE ? "write":"read", address, length); -+ } -+#endif -+ -+ if ((address >= HIF_MBOX_START_ADDR(0)) && -+ (address <= HIF_MBOX_END_ADDR(3))) -+ { -+ -+ DBG_ASSERT(length <= HIF_MBOX_WIDTH); -+ -+ /* -+ * Mailbox write. Adjust the address so that the last byte -+ * falls on the EOM address. -+ */ -+ address += (HIF_MBOX_WIDTH - length); -+ } -+ -+ -+ -+ if (request & HIF_WRITE) { -+ rw = CMD53_WRITE; -+ sdrequest->Flags |= SDREQ_FLAGS_DATA_WRITE; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Write\n")); -+ } else if (request & HIF_READ) { -+ rw = CMD53_READ; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Read\n")); -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Invalid direction: 0x%08x\n", request)); -+ status = A_EINVAL; -+ break; -+ } -+ -+ if (request & HIF_FIXED_ADDRESS) { -+ opcode = CMD53_FIXED_ADDRESS; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Fixed\n")); -+ } else if (request & HIF_INCREMENTAL_ADDRESS) { -+ opcode = CMD53_INCR_ADDRESS; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Incremental\n")); -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Invalid address mode: 0x%08x\n", request)); -+ status = A_EINVAL; -+ break; -+ } -+ -+ funcNo = SDDEVICE_GET_SDIO_FUNCNO(device->handle); -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Function number: %d\n", funcNo)); -+ SDIO_SET_CMD53_ARG(sdrequest->Argument, rw, funcNo, -+ mode, opcode, address, count); -+ -+ /* Send the command out */ -+ sdiostatus = SDDEVICE_CALL_REQUEST_FUNC(device->handle, sdrequest); -+ -+ if (!SDIO_SUCCESS(sdiostatus)) { -+ status = A_ERROR; -+ } -+ -+ } while (FALSE); -+ -+ if (A_FAILED(status) || (request & HIF_SYNCHRONOUS)) { -+ if (busrequest != NULL) { -+ hifFreeBusRequest(busrequest); -+ } -+ } -+ -+ if (A_FAILED(status) && (request & HIF_ASYNCHRONOUS)) { -+ /* call back async handler on failure */ -+ htcCallbacks.rwCompletionHandler(context, status); -+ } -+ -+ return status; -+} -+ -+A_STATUS -+HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode, -+ void *config, A_UINT32 configLen) -+{ -+ A_UINT32 count; -+ -+ switch(opcode) { -+ case HIF_DEVICE_GET_MBOX_BLOCK_SIZE: -+ ((A_UINT32 *)config)[0] = HIF_MBOX0_BLOCK_SIZE; -+ ((A_UINT32 *)config)[1] = HIF_MBOX1_BLOCK_SIZE; -+ ((A_UINT32 *)config)[2] = HIF_MBOX2_BLOCK_SIZE; -+ ((A_UINT32 *)config)[3] = HIF_MBOX3_BLOCK_SIZE; -+ break; -+ -+ case HIF_DEVICE_GET_MBOX_ADDR: -+ for (count = 0; count < 4; count ++) { -+ ((A_UINT32 *)config)[count] = HIF_MBOX_START_ADDR(count); -+ } -+ break; -+ case HIF_DEVICE_GET_IRQ_PROC_MODE: -+ /* the SDIO stack allows the interrupts to be processed either way, ASYNC or SYNC */ -+ *((HIF_DEVICE_IRQ_PROCESSING_MODE *)config) = HIF_DEVICE_IRQ_ASYNC_SYNC; -+ break; -+ default: -+ AR_DEBUG_PRINTF(ATH_DEBUG_WARN, -+ ("Unsupported configuration opcode: %d\n", opcode)); -+ return A_ERROR; -+ } -+ -+ return A_OK; -+} -+ -+void -+HIFShutDownDevice(HIF_DEVICE *device) -+{ -+ A_UINT8 data; -+ A_UINT32 count; -+ SDIO_STATUS status; -+ SDCONFIG_BUS_MODE_DATA busSettings; -+ SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData; -+ -+ if (device != NULL) { -+ DBG_ASSERT(device->handle != NULL); -+ -+ /* Remove the allocated current if any */ -+ status = SDLIB_IssueConfig(device->handle, -+ SDCONFIG_FUNC_FREE_SLOT_CURRENT, NULL, 0); -+ DBG_ASSERT(SDIO_SUCCESS(status)); -+ -+ /* Disable the card */ -+ fData.EnableFlags = SDCONFIG_DISABLE_FUNC; -+ fData.TimeOut = 1; -+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ENABLE_DISABLE, -+ &fData, sizeof(fData)); -+ DBG_ASSERT(SDIO_SUCCESS(status)); -+ -+ /* Perform a soft I/O reset */ -+ data = SDIO_IO_RESET; -+ status = SDLIB_IssueCMD52(device->handle, 0, SDIO_IO_ABORT_REG, -+ &data, 1, 1); -+ DBG_ASSERT(SDIO_SUCCESS(status)); -+ -+ /* -+ * WAR - Codetelligence driver does not seem to shutdown correctly in 1 -+ * bit mode. By default it configures the HC in the 4 bit. Its later in -+ * our driver that we switch to 1 bit mode. If we try to shutdown, the -+ * driver hangs so we revert to 4 bit mode, to be transparent to the -+ * underlying bus driver. -+ */ -+ if (onebitmode) { -+ ZERO_OBJECT(busSettings); -+ busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(device->handle); -+ SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags, -+ SDCONFIG_BUS_WIDTH_4_BIT); -+ -+ /* Issue config request to change the bus width to 4 bit */ -+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_BUS_MODE_CTRL, -+ &busSettings, -+ sizeof(SDCONFIG_BUS_MODE_DATA)); -+ DBG_ASSERT(SDIO_SUCCESS(status)); -+ } -+ -+ /* Free the bus requests */ -+ for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) { -+ SDDeviceFreeRequest(device->handle, busRequest[count].request); -+ } -+ /* Clean up the queue */ -+ s_busRequestFreeQueue = NULL; -+ } else { -+ /* since we are unloading the driver anyways, reset all cards in case the SDIO card -+ * is externally powered and we are unloading the SDIO stack. This avoids the problem when -+ * the SDIO stack is reloaded and attempts are made to re-enumerate a card that is already -+ * enumerated */ -+ ResetAllCards(); -+ /* Unregister with bus driver core */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, -+ ("Unregistering with the bus driver\n")); -+ status = SDIO_UnregisterFunction(&FunctionContext.function); -+ DBG_ASSERT(SDIO_SUCCESS(status)); -+ } -+} -+ -+void -+hifRWCompletionHandler(SDREQUEST *request) -+{ -+ A_STATUS status; -+ void *context; -+ BUS_REQUEST *busrequest; -+ -+ if (SDIO_SUCCESS(request->Status)) { -+ status = A_OK; -+ } else { -+ status = A_ERROR; -+ } -+ -+ DBG_ASSERT(status == A_OK); -+ busrequest = (BUS_REQUEST *) request->pCompleteContext; -+ context = (void *) busrequest->context; -+ /* free the request before calling the callback, in case the -+ * callback submits another request, this guarantees that -+ * there is at least 1 free request available everytime the callback -+ * is invoked */ -+ hifFreeBusRequest(busrequest); -+ htcCallbacks.rwCompletionHandler(context, status); -+} -+ -+void -+hifIRQHandler(void *context) -+{ -+ A_STATUS status; -+ HIF_DEVICE *device; -+ -+ device = (HIF_DEVICE *)context; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device)); -+ status = htcCallbacks.dsrHandler(device->htc_handle); -+ DBG_ASSERT(status == A_OK); -+} -+ -+BOOL -+hifDeviceInserted(SDFUNCTION *function, SDDEVICE *handle) -+{ -+ BOOL enabled; -+ A_UINT8 data; -+ A_UINT32 count; -+ HIF_DEVICE *device; -+ SDIO_STATUS status; -+ A_UINT16 maxBlocks; -+ A_UINT16 maxBlockSize; -+ SDCONFIG_BUS_MODE_DATA busSettings; -+ SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData; -+ TARGET_FUNCTION_CONTEXT *functionContext; -+ SDCONFIG_FUNC_SLOT_CURRENT_DATA slotCurrent; -+ SD_BUSCLOCK_RATE currentBusClock; -+ -+ DBG_ASSERT(function != NULL); -+ DBG_ASSERT(handle != NULL); -+ -+ device = addHifDevice(handle); -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device)); -+ functionContext = (TARGET_FUNCTION_CONTEXT *)function->pContext; -+ -+ /* -+ * Issue commands to get the manufacturer ID and stuff and compare it -+ * against the rev Id derived from the ID registered during the -+ * initialization process. Report the device only in the case there -+ * is a match. In the case od SDIO, the bus driver has already queried -+ * these details so we just need to use their data structures to get the -+ * relevant values. Infact, the driver has already matched it against -+ * the Ids that we registered with it so we dont need to the step here. -+ */ -+ -+ /* Configure the SDIO Bus Width */ -+ if (onebitmode) { -+ data = SDIO_BUS_WIDTH_1_BIT; -+ status = SDLIB_IssueCMD52(handle, 0, SDIO_BUS_IF_REG, &data, 1, 1); -+ if (!SDIO_SUCCESS(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Unable to set the bus width to 1 bit\n")); -+ return FALSE; -+ } -+ } -+ -+ /* Get current bus flags */ -+ ZERO_OBJECT(busSettings); -+ -+ busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(handle); -+ if (onebitmode) { -+ SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags, -+ SDCONFIG_BUS_WIDTH_1_BIT); -+ } -+ -+ /* get the current operating clock, the bus driver sets us up based -+ * on what our CIS reports and what the host controller can handle -+ * we can use this to determine whether we want to drop our clock rate -+ * down */ -+ currentBusClock = SDDEVICE_GET_OPER_CLOCK(handle); -+ busSettings.ClockRate = currentBusClock; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, -+ ("HIF currently running at: %d \n",currentBusClock)); -+ -+ /* see if HIF wants to run at a lower clock speed, we may already be -+ * at that lower clock speed */ -+ if (currentBusClock > (SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow)) { -+ busSettings.ClockRate = SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow; -+ AR_DEBUG_PRINTF(ATH_DEBUG_WARN, -+ ("HIF overriding clock to %d \n",busSettings.ClockRate)); -+ } -+ -+ /* Issue config request to override clock rate */ -+ status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_CHANGE_BUS_MODE, &busSettings, -+ sizeof(SDCONFIG_BUS_MODE_DATA)); -+ if (!SDIO_SUCCESS(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Unable to configure the host clock\n")); -+ return FALSE; -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, -+ ("Configured clock: %d, Maximum clock: %d\n", -+ busSettings.ActualClockRate, -+ SDDEVICE_GET_MAX_CLOCK(handle))); -+ } -+ -+ /* -+ * Check if the target supports block mode. This result of this check -+ * can be used to implement the HIFReadWrite API. -+ */ -+ if (SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle)) { -+ /* Limit block size to operational block limit or card function -+ capability */ -+ maxBlockSize = min(SDDEVICE_GET_OPER_BLOCK_LEN(handle), -+ SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle)); -+ -+ /* check if the card support multi-block transfers */ -+ if (!(SDDEVICE_GET_SDIOCARD_CAPS(handle) & SDIO_CAPS_MULTI_BLOCK)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Byte basis only\n")); -+ -+ /* Limit block size to max byte basis */ -+ maxBlockSize = min(maxBlockSize, -+ (A_UINT16)SDIO_MAX_LENGTH_BYTE_BASIS); -+ maxBlocks = 1; -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Multi-block capable\n")); -+ maxBlocks = SDDEVICE_GET_OPER_BLOCKS(handle); -+ status = SDLIB_SetFunctionBlockSize(handle, HIF_MBOX_BLOCK_SIZE); -+ if (!SDIO_SUCCESS(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Failed to set block size. Err:%d\n", status)); -+ return FALSE; -+ } -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, -+ ("Bytes Per Block: %d bytes, Block Count:%d \n", -+ maxBlockSize, maxBlocks)); -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Function does not support Block Mode!\n")); -+ return FALSE; -+ } -+ -+ /* Allocate the slot current */ -+ status = SDLIB_GetDefaultOpCurrent(handle, &slotCurrent.SlotCurrent); -+ if (SDIO_SUCCESS(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Allocating Slot current: %d mA\n", -+ slotCurrent.SlotCurrent)); -+ status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ALLOC_SLOT_CURRENT, -+ &slotCurrent, sizeof(slotCurrent)); -+ if (!SDIO_SUCCESS(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Failed to allocate slot current %d\n", status)); -+ return FALSE; -+ } -+ } -+ -+ /* Enable the dragon function */ -+ count = 0; -+ enabled = FALSE; -+ fData.TimeOut = 1; -+ fData.EnableFlags = SDCONFIG_ENABLE_FUNC; -+ while ((count++ < SDWLAN_ENABLE_DISABLE_TIMEOUT) && !enabled) -+ { -+ /* Enable dragon */ -+ status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ENABLE_DISABLE, -+ &fData, sizeof(fData)); -+ if (!SDIO_SUCCESS(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, -+ ("Attempting to enable the card again\n")); -+ continue; -+ } -+ -+ /* Mark the status as enabled */ -+ enabled = TRUE; -+ } -+ -+ /* Check if we were succesful in enabling the target */ -+ if (!enabled) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, -+ ("Failed to communicate with the target\n")); -+ return FALSE; -+ } -+ -+ /* Allocate the bus requests to be used later */ -+ A_MEMZERO(busRequest, sizeof(busRequest)); -+ for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) { -+ if ((busRequest[count].request = SDDeviceAllocRequest(handle)) == NULL){ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("Unable to allocate memory\n")); -+ /* TODO: Free the memory that has already been allocated */ -+ return FALSE; -+ } -+ hifFreeBusRequest(&busRequest[count]); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, -+ ("0x%08x = busRequest[%d].request = 0x%08x\n", -+ (unsigned int) &busRequest[count], count, -+ (unsigned int) busRequest[count].request)); -+ } -+ -+ /* Schedule a worker to handle device inserted, this is a temporary workaround -+ * to fix a deadlock if the device fails to intialize in the insertion handler -+ * The failure causes the instance to shutdown the HIF layer and unregister the -+ * function driver within the busdriver probe context which can deadlock -+ * -+ * NOTE: we cannot use the default work queue because that would block -+ * SD bus request processing for all synchronous I/O. We must use a kernel -+ * thread that is creating using the helper library. -+ * */ -+ -+ if (SDIO_SUCCESS(SDLIB_OSCreateHelper(&device->insert_helper, -+ insert_helper_func, -+ device))) { -+ device->helper_started = TRUE; -+ } -+ -+ return TRUE; -+} -+ -+static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper) -+{ -+ -+ /* -+ * Adding a wait of around a second before we issue the very first -+ * command to dragon. During the process of loading/unloading the -+ * driver repeatedly it was observed that we get a data timeout -+ * while accessing function 1 registers in the chip. The theory at -+ * this point is that some initialization delay in dragon is -+ * causing the SDIO state in dragon core to be not ready even after -+ * the ready bit indicates that function 1 is ready. Accomodating -+ * for this behavior by adding some delay in the driver before it -+ * issues the first command after switching on dragon. Need to -+ * investigate this a bit more - TODO -+ */ -+ -+ A_MDELAY(1000); -+ /* Inform HTC */ -+ if ((htcCallbacks.deviceInsertedHandler(SD_GET_OS_HELPER_CONTEXT(pHelper))) != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device rejected\n")); -+ } -+ -+ return 0; -+} -+ -+void -+HIFAckInterrupt(HIF_DEVICE *device) -+{ -+ SDIO_STATUS status; -+ DBG_ASSERT(device != NULL); -+ DBG_ASSERT(device->handle != NULL); -+ -+ /* Acknowledge our function IRQ */ -+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ACK_IRQ, -+ NULL, 0); -+ DBG_ASSERT(SDIO_SUCCESS(status)); -+} -+ -+void -+HIFUnMaskInterrupt(HIF_DEVICE *device) -+{ -+ SDIO_STATUS status; -+ -+ DBG_ASSERT(device != NULL); -+ DBG_ASSERT(device->handle != NULL); -+ -+ /* Register the IRQ Handler */ -+ SDDEVICE_SET_IRQ_HANDLER(device->handle, hifIRQHandler, device); -+ -+ /* Unmask our function IRQ */ -+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_UNMASK_IRQ, -+ NULL, 0); -+ DBG_ASSERT(SDIO_SUCCESS(status)); -+} -+ -+void HIFMaskInterrupt(HIF_DEVICE *device) -+{ -+ SDIO_STATUS status; -+ DBG_ASSERT(device != NULL); -+ DBG_ASSERT(device->handle != NULL); -+ -+ /* Mask our function IRQ */ -+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_MASK_IRQ, -+ NULL, 0); -+ DBG_ASSERT(SDIO_SUCCESS(status)); -+ -+ /* Unregister the IRQ Handler */ -+ SDDEVICE_SET_IRQ_HANDLER(device->handle, NULL, NULL); -+} -+ -+static BUS_REQUEST *hifAllocateBusRequest(void) -+{ -+ BUS_REQUEST *busrequest; -+ -+ /* Acquire lock */ -+ CriticalSectionAcquire(&lock); -+ -+ /* Remove first in list */ -+ if((busrequest = s_busRequestFreeQueue) != NULL) -+ { -+ s_busRequestFreeQueue = busrequest->next; -+ } -+ -+ /* Release lock */ -+ CriticalSectionRelease(&lock); -+ -+ return busrequest; -+} -+ -+static void -+hifFreeBusRequest(BUS_REQUEST *busrequest) -+{ -+ DBG_ASSERT(busrequest != NULL); -+ -+ /* Acquire lock */ -+ CriticalSectionAcquire(&lock); -+ -+ /* Insert first in list */ -+ busrequest->next = s_busRequestFreeQueue; -+ s_busRequestFreeQueue = busrequest; -+ -+ /* Release lock */ -+ CriticalSectionRelease(&lock); -+} -+ -+void -+hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *handle) -+{ -+ A_STATUS status; -+ HIF_DEVICE *device; -+ DBG_ASSERT(function != NULL); -+ DBG_ASSERT(handle != NULL); -+ -+ device = getHifDevice(handle); -+ status = htcCallbacks.deviceRemovedHandler(device->htc_handle, A_OK); -+ -+ /* cleanup the helper thread */ -+ if (device->helper_started) { -+ SDLIB_OSDeleteHelper(&device->insert_helper); -+ device->helper_started = FALSE; -+ } -+ -+ delHifDevice(handle); -+ DBG_ASSERT(status == A_OK); -+} -+ -+HIF_DEVICE * -+addHifDevice(SDDEVICE *handle) -+{ -+ DBG_ASSERT(handle != NULL); -+ hifDevice[0].handle = handle; -+ return &hifDevice[0]; -+} -+ -+HIF_DEVICE * -+getHifDevice(SDDEVICE *handle) -+{ -+ DBG_ASSERT(handle != NULL); -+ return &hifDevice[0]; -+} -+ -+void -+delHifDevice(SDDEVICE *handle) -+{ -+ DBG_ASSERT(handle != NULL); -+ hifDevice[0].handle = NULL; -+} -+ -+struct device* -+HIFGetOSDevice(HIF_DEVICE *device) -+{ -+ return &device->handle->Device.dev; -+} -+ -+static void ResetAllCards(void) -+{ -+ UINT8 data; -+ SDIO_STATUS status; -+ int i; -+ -+ data = SDIO_IO_RESET; -+ -+ /* set the I/O CARD reset bit: -+ * NOTE: we are exploiting a "feature" of the SDIO core that resets the core when you -+ * set the RES bit in the SDIO_IO_ABORT register. This bit however "normally" resets the -+ * I/O functions leaving the SDIO core in the same state (as per SDIO spec). -+ * In this design, this reset can be used to reset the SDIO core itself */ -+ for (i = 0; i < HIF_MAX_DEVICES; i++) { -+ if (hifDevice[i].handle != NULL) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, -+ ("Issuing I/O Card reset for instance: %d \n",i)); -+ /* set the I/O Card reset bit */ -+ status = SDLIB_IssueCMD52(hifDevice[i].handle, -+ 0, /* function 0 space */ -+ SDIO_IO_ABORT_REG, -+ &data, -+ 1, /* 1 byte */ -+ TRUE); /* write */ -+ } -+ } -+ -+} -+ -+void HIFSetHandle(void *hif_handle, void *handle) -+{ -+ HIF_DEVICE *device = (HIF_DEVICE *) hif_handle; -+ -+ device->htc_handle = handle; -+ -+ return; -+} -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/hif/hif_internal.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/hif/hif_internal.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,102 @@ -+/* -+ * @file: hif_internal.h -+ * -+ * @abstract: internal header file for hif layer -+ * -+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "a_osapi.h" -+#include "hif.h" -+ -+#define MANUFACTURER_ID_AR6001_BASE 0x100 -+#define MANUFACTURER_ID_AR6002_BASE 0x200 -+#define FUNCTION_CLASS 0x0 -+#define MANUFACTURER_CODE 0x271 -+ -+#define BUS_REQUEST_MAX_NUM 64 -+ -+#define SDIO_CLOCK_FREQUENCY_DEFAULT 25000000 -+#define SDWLAN_ENABLE_DISABLE_TIMEOUT 20 -+#define FLAGS_CARD_ENAB 0x02 -+#define FLAGS_CARD_IRQ_UNMSK 0x04 -+ -+#define HIF_MBOX_BLOCK_SIZE 128 -+#define HIF_MBOX_BASE_ADDR 0x800 -+#define HIF_MBOX_WIDTH 0x800 -+#define HIF_MBOX0_BLOCK_SIZE 1 -+#define HIF_MBOX1_BLOCK_SIZE HIF_MBOX_BLOCK_SIZE -+#define HIF_MBOX2_BLOCK_SIZE HIF_MBOX_BLOCK_SIZE -+#define HIF_MBOX3_BLOCK_SIZE HIF_MBOX_BLOCK_SIZE -+ -+#define HIF_MBOX_START_ADDR(mbox) \ -+ HIF_MBOX_BASE_ADDR + mbox * HIF_MBOX_WIDTH -+ -+#define HIF_MBOX_END_ADDR(mbox) \ -+ HIF_MBOX_START_ADDR(mbox) + HIF_MBOX_WIDTH - 1 -+ -+struct hif_device { -+ SDDEVICE *handle; -+ void *htc_handle; -+ OSKERNEL_HELPER insert_helper; -+ BOOL helper_started; -+}; -+ -+typedef struct target_function_context { -+ SDFUNCTION function; /* function description of the bus driver */ -+ OS_SEMAPHORE instanceSem; /* instance lock. Unused */ -+ SDLIST instanceList; /* list of instances. Unused */ -+} TARGET_FUNCTION_CONTEXT; -+ -+typedef struct bus_request { -+ struct bus_request *next; -+ SDREQUEST *request; -+ void *context; -+} BUS_REQUEST; -+ -+BOOL -+hifDeviceInserted(SDFUNCTION *function, SDDEVICE *device); -+ -+void -+hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *device); -+ -+SDREQUEST * -+hifAllocateDeviceRequest(SDDEVICE *device); -+ -+void -+hifFreeDeviceRequest(SDREQUEST *request); -+ -+void -+hifRWCompletionHandler(SDREQUEST *request); -+ -+void -+hifIRQHandler(void *context); -+ -+HIF_DEVICE * -+addHifDevice(SDDEVICE *handle); -+ -+HIF_DEVICE * -+getHifDevice(SDDEVICE *handle); -+ -+void -+delHifDevice(SDDEVICE *handle); -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/ar6k.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/ar6k.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,991 @@ -+/* -+ * AR6K device layer that handles register level I/O -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "AR6Khwreg.h" -+#include "a_osapi.h" -+#include "a_debug.h" -+#include "hif.h" -+#include "htc_packet.h" -+#include "ar6k.h" -+ -+#define MAILBOX_FOR_BLOCK_SIZE 1 -+ -+extern A_UINT32 resetok; -+ -+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev); -+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev); -+ -+#define LOCK_AR6K(p) A_MUTEX_LOCK(&(p)->Lock); -+#define UNLOCK_AR6K(p) A_MUTEX_UNLOCK(&(p)->Lock); -+ -+void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket) -+{ -+ LOCK_AR6K(pDev); -+ HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket); -+ UNLOCK_AR6K(pDev); -+} -+ -+HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev) -+{ -+ HTC_PACKET *pPacket; -+ -+ LOCK_AR6K(pDev); -+ pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList); -+ UNLOCK_AR6K(pDev); -+ -+ return pPacket; -+} -+ -+A_STATUS DevSetup(AR6K_DEVICE *pDev) -+{ -+ A_UINT32 mailboxaddrs[AR6K_MAILBOXES]; -+ A_UINT32 blocksizes[AR6K_MAILBOXES]; -+ A_STATUS status = A_OK; -+ int i; -+ -+ AR_DEBUG_ASSERT(AR6K_IRQ_PROC_REGS_SIZE == 16); -+ AR_DEBUG_ASSERT(AR6K_IRQ_ENABLE_REGS_SIZE == 4); -+ -+ do { -+ /* give a handle to HIF for this target */ -+ HIFSetHandle(pDev->HIFDevice, (void *)pDev); -+ /* initialize our free list of IO packets */ -+ INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList); -+ A_MUTEX_INIT(&pDev->Lock); -+ -+ /* get the addresses for all 4 mailboxes */ -+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR, -+ mailboxaddrs, sizeof(mailboxaddrs)); -+ -+ if (status != A_OK) { -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ /* carve up register I/O packets (these are for ASYNC register I/O ) */ -+ for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) { -+ HTC_PACKET *pIOPacket; -+ pIOPacket = &pDev->RegIOBuffers[i].HtcPacket; -+ SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket, -+ pDev, -+ pDev->RegIOBuffers[i].Buffer, -+ AR6K_REG_IO_BUFFER_SIZE, -+ 0); /* don't care */ -+ AR6KFreeIOPacket(pDev,pIOPacket); -+ } -+ -+ /* get the address of the mailbox we are using */ -+ pDev->MailboxAddress = mailboxaddrs[HTC_MAILBOX]; -+ -+ /* get the block sizes */ -+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE, -+ blocksizes, sizeof(blocksizes)); -+ -+ if (status != A_OK) { -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ /* note: we actually get the block size of a mailbox other than 0, for SDIO the block -+ * size on mailbox 0 is artificially set to 1. So we use the block size that is set -+ * for the other 3 mailboxes */ -+ pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE]; -+ /* must be a power of 2 */ -+ AR_DEBUG_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0); -+ -+ /* assemble mask, used for padding to a block */ -+ pDev->BlockMask = pDev->BlockSize - 1; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n", -+ pDev->BlockSize, pDev->MailboxAddress)); -+ -+ pDev->GetPendingEventsFunc = NULL; -+ /* see if the HIF layer implements the get pending events function */ -+ HIFConfigureDevice(pDev->HIFDevice, -+ HIF_DEVICE_GET_PENDING_EVENTS_FUNC, -+ &pDev->GetPendingEventsFunc, -+ sizeof(pDev->GetPendingEventsFunc)); -+ -+ /* assume we can process HIF interrupt events asynchronously */ -+ pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC; -+ -+ /* see if the HIF layer overrides this assumption */ -+ HIFConfigureDevice(pDev->HIFDevice, -+ HIF_DEVICE_GET_IRQ_PROC_MODE, -+ &pDev->HifIRQProcessingMode, -+ sizeof(pDev->HifIRQProcessingMode)); -+ -+ switch (pDev->HifIRQProcessingMode) { -+ case HIF_DEVICE_IRQ_SYNC_ONLY: -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is SYNC ONLY\n")); -+ break; -+ case HIF_DEVICE_IRQ_ASYNC_SYNC: -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n")); -+ break; -+ default: -+ AR_DEBUG_ASSERT(FALSE); -+ } -+ -+ pDev->HifMaskUmaskRecvEvent = NULL; -+ -+ /* see if the HIF layer implements the mask/unmask recv events function */ -+ HIFConfigureDevice(pDev->HIFDevice, -+ HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC, -+ &pDev->HifMaskUmaskRecvEvent, -+ sizeof(pDev->HifMaskUmaskRecvEvent)); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%X , 0x%X\n", -+ (A_UINT32)pDev->GetPendingEventsFunc, (A_UINT32)pDev->HifMaskUmaskRecvEvent)); -+ -+ status = DevDisableInterrupts(pDev); -+ -+ } while (FALSE); -+ -+ if (A_FAILED(status)) { -+ /* make sure handle is cleared */ -+ HIFSetHandle(pDev->HIFDevice, NULL); -+ } -+ -+ return status; -+ -+} -+ -+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev) -+{ -+ A_STATUS status; -+ AR6K_IRQ_ENABLE_REGISTERS regs; -+ -+ LOCK_AR6K(pDev); -+ -+ /* Enable all the interrupts except for the dragon interrupt */ -+ pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) | -+ INT_STATUS_ENABLE_CPU_SET(0x01) | -+ INT_STATUS_ENABLE_COUNTER_SET(0x01); -+ -+ if (NULL == pDev->GetPendingEventsFunc) { -+ pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); -+ } else { -+ /* The HIF layer provided us with a pending events function which means that -+ * the detection of pending mbox messages is handled in the HIF layer. -+ * This is the case for the SPI2 interface. -+ * In the normal case we enable MBOX interrupts, for the case -+ * with HIFs that offer this mechanism, we keep these interrupts -+ * masked */ -+ pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); -+ } -+ -+ -+ /* Set up the CPU Interrupt Status Register */ -+ pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00); -+ -+ /* Set up the Error Interrupt Status Register */ -+ pDev->IrqEnableRegisters.error_status_enable = -+ ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) | -+ ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01); -+ -+ /* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */ -+ pDev->IrqEnableRegisters.counter_int_status_enable = -+ COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK); -+ -+ /* copy into our temp area */ -+ A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); -+ -+ UNLOCK_AR6K(pDev); -+ -+ /* always synchronous */ -+ status = HIFReadWrite(pDev->HIFDevice, -+ INT_STATUS_ENABLE_ADDRESS, -+ ®s.int_status_enable, -+ AR6K_IRQ_ENABLE_REGS_SIZE, -+ HIF_WR_SYNC_BYTE_INC, -+ NULL); -+ -+ if (status != A_OK) { -+ /* Can't write it for some reason */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("Failed to update interrupt control registers err: %d\n", status)); -+ -+ } -+ -+ return status; -+} -+ -+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev) -+{ -+ AR6K_IRQ_ENABLE_REGISTERS regs; -+ -+ LOCK_AR6K(pDev); -+ /* Disable all interrupts */ -+ pDev->IrqEnableRegisters.int_status_enable = 0; -+ pDev->IrqEnableRegisters.cpu_int_status_enable = 0; -+ pDev->IrqEnableRegisters.error_status_enable = 0; -+ pDev->IrqEnableRegisters.counter_int_status_enable = 0; -+ /* copy into our temp area */ -+ A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); -+ -+ UNLOCK_AR6K(pDev); -+ -+ /* always synchronous */ -+ return HIFReadWrite(pDev->HIFDevice, -+ INT_STATUS_ENABLE_ADDRESS, -+ ®s.int_status_enable, -+ AR6K_IRQ_ENABLE_REGS_SIZE, -+ HIF_WR_SYNC_BYTE_INC, -+ NULL); -+} -+ -+/* enable device interrupts */ -+A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev) -+{ -+ /* Unmask the host controller interrupts */ -+ HIFUnMaskInterrupt(pDev->HIFDevice); -+ -+ return DevEnableInterrupts(pDev); -+} -+ -+/* disable all device interrupts */ -+A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev) -+{ -+ A_STATUS status; -+ -+ status = DevDisableInterrupts(pDev); -+ -+ if (A_SUCCESS(status)) { -+ /* Disable the interrupt at the HIF layer */ -+ HIFMaskInterrupt(pDev->HIFDevice); -+ } -+ -+ return status; -+} -+ -+/* callback when our fetch to enable/disable completes */ -+static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket) -+{ -+ AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev)); -+ -+ if (A_FAILED(pPacket->Status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ (" Failed to disable receiver, status:%d \n", pPacket->Status)); -+ } -+ /* free this IO packet */ -+ AR6KFreeIOPacket(pDev,pPacket); -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n")); -+} -+ -+/* disable packet reception (used in case the host runs out of buffers) -+ * this is the "override" method when the HIF reports another methods to -+ * disable recv events */ -+static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode) -+{ -+ A_STATUS status = A_OK; -+ HTC_PACKET *pIOPacket = NULL; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n", -+ EnableRecv,AsyncMode)); -+ -+ do { -+ -+ if (AsyncMode) { -+ -+ pIOPacket = AR6KAllocIOPacket(pDev); -+ -+ if (NULL == pIOPacket) { -+ status = A_NO_MEMORY; -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ /* stick in our completion routine when the I/O operation completes */ -+ pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler; -+ pIOPacket->pContext = pDev; -+ -+ /* call the HIF layer override and do this asynchronously */ -+ status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice, -+ EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV, -+ pIOPacket); -+ break; -+ } -+ -+ /* if we get here we are doing it synchronously */ -+ status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice, -+ EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV, -+ NULL); -+ -+ } while (FALSE); -+ -+ if (A_FAILED(status) && (pIOPacket != NULL)) { -+ AR6KFreeIOPacket(pDev,pIOPacket); -+ } -+ -+ return status; -+} -+ -+/* disable packet reception (used in case the host runs out of buffers) -+ * this is the "normal" method using the interrupt enable registers through -+ * the host I/F */ -+static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode) -+{ -+ A_STATUS status = A_OK; -+ HTC_PACKET *pIOPacket = NULL; -+ AR6K_IRQ_ENABLE_REGISTERS regs; -+ -+ /* take the lock to protect interrupt enable shadows */ -+ LOCK_AR6K(pDev); -+ -+ if (EnableRecv) { -+ pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); -+ } else { -+ pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); -+ } -+ -+ /* copy into our temp area */ -+ A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); -+ UNLOCK_AR6K(pDev); -+ -+ do { -+ -+ if (AsyncMode) { -+ -+ pIOPacket = AR6KAllocIOPacket(pDev); -+ -+ if (NULL == pIOPacket) { -+ status = A_NO_MEMORY; -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ /* copy values to write to our async I/O buffer */ -+ A_MEMCPY(pIOPacket->pBuffer,®s,AR6K_IRQ_ENABLE_REGS_SIZE); -+ -+ /* stick in our completion routine when the I/O operation completes */ -+ pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler; -+ pIOPacket->pContext = pDev; -+ -+ /* write it out asynchronously */ -+ HIFReadWrite(pDev->HIFDevice, -+ INT_STATUS_ENABLE_ADDRESS, -+ pIOPacket->pBuffer, -+ AR6K_IRQ_ENABLE_REGS_SIZE, -+ HIF_WR_ASYNC_BYTE_INC, -+ pIOPacket); -+ break; -+ } -+ -+ /* if we get here we are doing it synchronously */ -+ -+ status = HIFReadWrite(pDev->HIFDevice, -+ INT_STATUS_ENABLE_ADDRESS, -+ ®s.int_status_enable, -+ AR6K_IRQ_ENABLE_REGS_SIZE, -+ HIF_WR_SYNC_BYTE_INC, -+ NULL); -+ -+ } while (FALSE); -+ -+ if (A_FAILED(status) && (pIOPacket != NULL)) { -+ AR6KFreeIOPacket(pDev,pIOPacket); -+ } -+ -+ return status; -+} -+ -+ -+A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode) -+{ -+ if (NULL == pDev->HifMaskUmaskRecvEvent) { -+ return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode); -+ } else { -+ return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode); -+ } -+} -+ -+A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode) -+{ -+ if (NULL == pDev->HifMaskUmaskRecvEvent) { -+ return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode); -+ } else { -+ return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode); -+ } -+} -+ -+void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS *pIrqProcRegs, -+ AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs) -+{ -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("\n<------- Register Table -------->\n")); -+ -+ if (pIrqProcRegs != NULL) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("Int Status: 0x%x\n",pIrqProcRegs->host_int_status)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("CPU Int Status: 0x%x\n",pIrqProcRegs->cpu_int_status)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("Error Int Status: 0x%x\n",pIrqProcRegs->error_int_status)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("Counter Int Status: 0x%x\n",pIrqProcRegs->counter_int_status)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("Mbox Frame: 0x%x\n",pIrqProcRegs->mbox_frame)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("Rx Lookahead Valid: 0x%x\n",pIrqProcRegs->rx_lookahead_valid)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("Rx Lookahead 0: 0x%x\n",pIrqProcRegs->rx_lookahead[0])); -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("Rx Lookahead 1: 0x%x\n",pIrqProcRegs->rx_lookahead[1])); -+ } -+ -+ if (pIrqEnableRegs != NULL) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("Int Status Enable: 0x%x\n",pIrqEnableRegs->int_status_enable)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, -+ ("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("<------------------------------->\n")); -+ } -+} -+ -+ -+#ifdef MBOXHW_UNIT_TEST -+ -+ -+/* This is a mailbox hardware unit test that must be called in a schedulable context -+ * This test is very simple, it will send a list of buffers with a counting pattern -+ * and the target will invert the data and send the message back -+ * -+ * the unit test has the following constraints: -+ * -+ * The target has at least 8 buffers of 256 bytes each. The host will send -+ * the following pattern of buffers in rapid succession : -+ * -+ * 1 buffer - 128 bytes -+ * 1 buffer - 256 bytes -+ * 1 buffer - 512 bytes -+ * 1 buffer - 1024 bytes -+ * -+ * The host will send the buffers to one mailbox and wait for buffers to be reflected -+ * back from the same mailbox. The target sends the buffers FIFO order. -+ * Once the final buffer has been received for a mailbox, the next mailbox is tested. -+ * -+ * -+ * Note: To simplifythe test , we assume that the chosen buffer sizes -+ * will fall on a nice block pad -+ * -+ * It is expected that higher-order tests will be written to stress the mailboxes using -+ * a message-based protocol (with some performance timming) that can create more -+ * randomness in the packets sent over mailboxes. -+ * -+ * */ -+ -+#define A_ROUND_UP_PWR2(x, align) (((int) (x) + ((align)-1)) & ~((align)-1)) -+ -+#define BUFFER_BLOCK_PAD 128 -+ -+#if 0 -+#define BUFFER1 128 -+#define BUFFER2 256 -+#define BUFFER3 512 -+#define BUFFER4 1024 -+#endif -+ -+#if 1 -+#define BUFFER1 80 -+#define BUFFER2 200 -+#define BUFFER3 444 -+#define BUFFER4 800 -+#endif -+ -+#define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \ -+ A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \ -+ A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \ -+ A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) ) -+ -+#define TEST_BYTES (BUFFER1 + BUFFER2 + BUFFER3 + BUFFER4) -+ -+#define TEST_CREDITS_RECV_TIMEOUT 100 -+ -+static A_UINT8 g_Buffer[TOTAL_BYTES]; -+static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES]; -+static A_UINT32 g_BlockSizes[AR6K_MAILBOXES]; -+ -+#define BUFFER_PROC_LIST_DEPTH 4 -+ -+typedef struct _BUFFER_PROC_LIST{ -+ A_UINT8 *pBuffer; -+ A_UINT32 length; -+}BUFFER_PROC_LIST; -+ -+ -+#define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \ -+{ \ -+ (pList)->pBuffer = (pCurrpos); \ -+ (pList)->length = (len); \ -+ (pCurrpos) += (len); \ -+ (pList)++; \ -+} -+ -+/* a simple and crude way to send different "message" sizes */ -+static void AssembleBufferList(BUFFER_PROC_LIST *pList) -+{ -+ A_UINT8 *pBuffer = g_Buffer; -+ -+#if BUFFER_PROC_LIST_DEPTH < 4 -+#error "Buffer processing list depth is not deep enough!!" -+#endif -+ -+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer); -+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer); -+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer); -+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer); -+ -+} -+ -+#define FILL_ZERO TRUE -+#define FILL_COUNTING FALSE -+static void InitBuffers(A_BOOL Zero) -+{ -+ A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer; -+ int i; -+ -+ /* fill buffer with 16 bit counting pattern or zeros */ -+ for (i = 0; i < (TOTAL_BYTES / 2) ; i++) { -+ if (!Zero) { -+ pBuffer16[i] = (A_UINT16)i; -+ } else { -+ pBuffer16[i] = 0; -+ } -+ } -+} -+ -+ -+static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length) -+{ -+ int i; -+ A_UINT16 startCount; -+ A_BOOL success = TRUE; -+ -+ /* get the starting count */ -+ startCount = pBuffer16[0]; -+ /* invert it, this is the expected value */ -+ startCount = ~startCount; -+ /* scan the buffer and verify */ -+ for (i = 0; i < (Length / 2) ; i++,startCount++) { -+ /* target will invert all the data */ -+ if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) { -+ success = FALSE; -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n", -+ pBuffer16[i], ((A_UINT16)~startCount), i, Length)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n", -+ pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3])); -+ break; -+ } -+ } -+ -+ return success; -+} -+ -+static A_BOOL CheckBuffers(void) -+{ -+ int i; -+ A_BOOL success = TRUE; -+ BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH]; -+ -+ /* assemble the list */ -+ AssembleBufferList(checkList); -+ -+ /* scan the buffers and verify */ -+ for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) { -+ success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length); -+ if (!success) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n", -+ (A_UINT32)checkList[i].pBuffer, checkList[i].length)); -+ break; -+ } -+ } -+ -+ return success; -+} -+ -+ /* find the end marker for the last buffer we will be sending */ -+static A_UINT16 GetEndMarker(void) -+{ -+ A_UINT8 *pBuffer; -+ BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH]; -+ -+ /* fill up buffers with the normal counting pattern */ -+ InitBuffers(FILL_COUNTING); -+ -+ /* assemble the list we will be sending down */ -+ AssembleBufferList(checkList); -+ /* point to the last 2 bytes of the last buffer */ -+ pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]); -+ -+ /* the last count in the last buffer is the marker */ -+ return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8); -+} -+ -+#define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR -+ -+/* send the ordered buffers to the target */ -+static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox) -+{ -+ A_STATUS status = A_OK; -+ A_UINT32 request = HIF_WR_SYNC_BLOCK_INC; -+ BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH]; -+ int i; -+ int totalBytes = 0; -+ int paddedLength; -+ int totalwPadding = 0; -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox)); -+ -+ /* fill buffer with counting pattern */ -+ InitBuffers(FILL_COUNTING); -+ -+ /* assemble the order in which we send */ -+ AssembleBufferList(sendList); -+ -+ for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) { -+ -+ /* we are doing block transfers, so we need to pad everything to a block size */ -+ paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) & -+ (~(g_BlockSizes[mbox] - 1)); -+ -+ /* send each buffer synchronously */ -+ status = HIFReadWrite(pDev->HIFDevice, -+ g_MailboxAddrs[mbox], -+ sendList[i].pBuffer, -+ paddedLength, -+ request, -+ NULL); -+ if (status != A_OK) { -+ break; -+ } -+ totalBytes += sendList[i].length; -+ totalwPadding += paddedLength; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox)); -+ -+ return status; -+} -+ -+/* poll the mailbox credit counter until we get a credit or timeout */ -+static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits) -+{ -+ A_STATUS status = A_OK; -+ int timeout = TEST_CREDITS_RECV_TIMEOUT; -+ A_UINT8 credits = 0; -+ A_UINT32 address; -+ -+ while (TRUE) { -+ -+ /* Read the counter register to get credits, this auto-decrements */ -+ address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4; -+ status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits), -+ HIF_RD_SYNC_BYTE_FIX, NULL); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("Unable to decrement the command credit count register (mbox=%d)\n",mbox)); -+ status = A_ERROR; -+ break; -+ } -+ -+ if (credits) { -+ break; -+ } -+ -+ timeout--; -+ -+ if (timeout <= 0) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ (" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address)); -+ status = A_ERROR; -+ break; -+ } -+ -+ /* delay a little, target may not be ready */ -+ A_MDELAY(1000); -+ -+ } -+ -+ if (status == A_OK) { -+ *pCredits = credits; -+ } -+ -+ return status; -+} -+ -+ -+/* wait for the buffers to come back */ -+static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox) -+{ -+ A_STATUS status = A_OK; -+ A_UINT32 request = HIF_RD_SYNC_BLOCK_INC; -+ BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH]; -+ int curBuffer; -+ int credits; -+ int i; -+ int totalBytes = 0; -+ int paddedLength; -+ int totalwPadding = 0; -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox)); -+ -+ /* zero the buffers */ -+ InitBuffers(FILL_ZERO); -+ -+ /* assemble the order in which we should receive */ -+ AssembleBufferList(recvList); -+ -+ curBuffer = 0; -+ -+ while (curBuffer < BUFFER_PROC_LIST_DEPTH) { -+ -+ /* get number of buffers that have been completed, this blocks -+ * until we get at least 1 credit or it times out */ -+ status = GetCredits(pDev, mbox, &credits); -+ -+ if (status != A_OK) { -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox)); -+ -+ /* get all the buffers that are sitting on the queue */ -+ for (i = 0; i < credits; i++) { -+ AR_DEBUG_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH); -+ /* recv the current buffer synchronously, the buffers should come back in -+ * order... with padding applied by the target */ -+ paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) & -+ (~(g_BlockSizes[mbox] - 1)); -+ -+ status = HIFReadWrite(pDev->HIFDevice, -+ g_MailboxAddrs[mbox], -+ recvList[curBuffer].pBuffer, -+ paddedLength, -+ request, -+ NULL); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n", -+ recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox])); -+ break; -+ } -+ -+ totalwPadding += paddedLength; -+ totalBytes += recvList[curBuffer].length; -+ curBuffer++; -+ } -+ -+ if (status != A_OK) { -+ break; -+ } -+ /* go back and get some more */ -+ credits = 0; -+ } -+ -+ if (totalBytes != TEST_BYTES) { -+ AR_DEBUG_ASSERT(FALSE); -+ } else { -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n", -+ mbox, totalBytes, totalwPadding)); -+ } -+ -+ return status; -+ -+ -+} -+ -+static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox) -+{ -+ A_STATUS status; -+ -+ do { -+ /* send out buffers */ -+ status = SendBuffers(pDev,mbox); -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox)); -+ break; -+ } -+ -+ /* go get them, this will block */ -+ status = RecvBuffers(pDev, mbox); -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox)); -+ break; -+ } -+ -+ /* check the returned data patterns */ -+ if (!CheckBuffers()) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox)); -+ status = A_ERROR; -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox)); -+ -+ } while (FALSE); -+ -+ return status; -+} -+ -+/* here is where the test starts */ -+A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev) -+{ -+ int i; -+ A_STATUS status; -+ int credits = 0; -+ A_UINT8 params[4]; -+ int numBufs; -+ int bufferSize; -+ A_UINT16 temp; -+ -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START - \n")); -+ -+ do { -+ /* get the addresses for all 4 mailboxes */ -+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR, -+ g_MailboxAddrs, sizeof(g_MailboxAddrs)); -+ -+ if (status != A_OK) { -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ /* get the block sizes */ -+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE, -+ g_BlockSizes, sizeof(g_BlockSizes)); -+ -+ if (status != A_OK) { -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ /* note, the HIF layer usually reports mbox 0 to have a block size of -+ * 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes -+ * the same. */ -+ g_BlockSizes[0] = g_BlockSizes[1]; -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0])); -+ -+ if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) { -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n", -+ g_BlockSizes[1], BUFFER_BLOCK_PAD)); -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n")); -+ -+ /* the target lets us know it is ready by giving us 1 credit on -+ * mailbox 0 */ -+ status = GetCredits(pDev, 0, &credits); -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n")); -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n")); -+ -+ /* read the first 4 scratch registers */ -+ status = HIFReadWrite(pDev->HIFDevice, -+ SCRATCH_ADDRESS, -+ params, -+ 4, -+ HIF_RD_SYNC_BYTE_INC, -+ NULL); -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n")); -+ break; -+ } -+ -+ numBufs = params[0]; -+ bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]); -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, -+ ("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n", -+ numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES)); -+ -+ if ((numBufs * bufferSize) < TOTAL_BYTES) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n", -+ TOTAL_BYTES, (numBufs*bufferSize))); -+ status = A_ERROR; -+ break; -+ } -+ -+ temp = GetEndMarker(); -+ -+ status = HIFReadWrite(pDev->HIFDevice, -+ SCRATCH_ADDRESS + 4, -+ (A_UINT8 *)&temp, -+ 2, -+ HIF_WR_SYNC_BYTE_INC, -+ NULL); -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n")); -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp)); -+ -+ temp = (A_UINT16)g_BlockSizes[1]; -+ /* convert to a mask */ -+ temp = temp - 1; -+ status = HIFReadWrite(pDev->HIFDevice, -+ SCRATCH_ADDRESS + 6, -+ (A_UINT8 *)&temp, -+ 2, -+ HIF_WR_SYNC_BYTE_INC, -+ NULL); -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n")); -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp)); -+ -+ /* execute the test on each mailbox */ -+ for (i = 0; i < AR6K_MAILBOXES; i++) { -+ status = DoOneMboxHWTest(pDev, i); -+ if (status != A_OK) { -+ break; -+ } -+ } -+ -+ } while (FALSE); -+ -+ if (status == A_OK) { -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! - \n")); -+ } else { -+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! - \n")); -+ } -+ /* don't let HTC_Start continue, the target is actually not running any HTC code */ -+ return A_ERROR; -+} -+#endif -+ -+ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/ar6k_events.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/ar6k_events.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,638 @@ -+/* -+ * AR6K Driver layer event handling (i.e. interrupts, message polling) -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "AR6Khwreg.h" -+#include "a_osapi.h" -+#include "a_debug.h" -+#include "hif.h" -+#include "htc_packet.h" -+#include "ar6k.h" -+ -+extern void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket); -+extern HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev); -+ -+static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev); -+ -+#define DELAY_PER_INTERVAL_MS 10 /* 10 MS delay per polling interval */ -+ -+/* completion routine for ALL HIF layer async I/O */ -+A_STATUS DevRWCompletionHandler(void *context, A_STATUS status) -+{ -+ HTC_PACKET *pPacket = (HTC_PACKET *)context; -+ -+ COMPLETE_HTC_PACKET(pPacket,status); -+ -+ return A_OK; -+} -+ -+/* mailbox recv message polling */ -+A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev, -+ A_UINT32 *pLookAhead, -+ int TimeoutMS) -+{ -+ A_STATUS status = A_OK; -+ int timeout = TimeoutMS/DELAY_PER_INTERVAL_MS; -+ -+ AR_DEBUG_ASSERT(timeout > 0); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+DevPollMboxMsgRecv \n")); -+ -+ while (TRUE) { -+ -+ if (pDev->GetPendingEventsFunc != NULL) -+ { -+ -+ HIF_PENDING_EVENTS_INFO events; -+ -+ /* the HIF layer uses a special mechanism to get events, do this -+ * synchronously */ -+ status = pDev->GetPendingEventsFunc(pDev->HIFDevice, -+ &events, -+ NULL); -+ if (A_FAILED(status)) -+ { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to get pending events \n")); -+ break; -+ } -+ -+ if (events.Events & HIF_RECV_MSG_AVAIL) -+ { -+ /* there is a message available, the lookahead should be valid now */ -+ *pLookAhead = events.LookAhead; -+ -+ break; -+ } -+ } -+ else -+ { -+ -+ /* this is the standard HIF way.... */ -+ /* load the register table */ -+ status = HIFReadWrite(pDev->HIFDevice, -+ HOST_INT_STATUS_ADDRESS, -+ (A_UINT8 *)&pDev->IrqProcRegisters, -+ AR6K_IRQ_PROC_REGS_SIZE, -+ HIF_RD_SYNC_BYTE_INC, -+ NULL); -+ -+ if (A_FAILED(status)) -+ { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to read register table \n")); -+ break; -+ } -+ -+ /* check for MBOX data and valid lookahead */ -+ if (pDev->IrqProcRegisters.host_int_status & (1 << HTC_MAILBOX)) -+ { -+ if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) -+ { -+ /* mailbox has a message and the look ahead is valid */ -+ *pLookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX]; -+ break; -+ } -+ } -+ -+ } -+ -+ timeout--; -+ -+ if (timeout <= 0) -+ { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Timeout waiting for recv message \n")); -+ status = A_ERROR; -+ -+ /* check if the target asserted */ -+ if ( pDev->IrqProcRegisters.counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) { -+ /* target signaled an assert, process this pending interrupt -+ * this will call the target failure handler */ -+ DevServiceDebugInterrupt(pDev); -+ } -+ -+ break; -+ } -+ -+ /* delay a little */ -+ A_MDELAY(DELAY_PER_INTERVAL_MS); -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" Retry Mbox Poll : %d \n",timeout)); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-DevPollMboxMsgRecv \n")); -+ -+ return status; -+} -+ -+static A_STATUS DevServiceCPUInterrupt(AR6K_DEVICE *pDev) -+{ -+ A_STATUS status; -+ A_UINT8 cpu_int_status; -+ A_UINT8 regBuffer[4]; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("CPU Interrupt\n")); -+ cpu_int_status = pDev->IrqProcRegisters.cpu_int_status & -+ pDev->IrqEnableRegisters.cpu_int_status_enable; -+ AR_DEBUG_ASSERT(cpu_int_status); -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, -+ ("Valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n", -+ cpu_int_status)); -+ -+ /* Clear the interrupt */ -+ pDev->IrqProcRegisters.cpu_int_status &= ~cpu_int_status; /* W1C */ -+ -+ /* set up the register transfer buffer to hit the register 4 times , this is done -+ * to make the access 4-byte aligned to mitigate issues with host bus interconnects that -+ * restrict bus transfer lengths to be a multiple of 4-bytes */ -+ -+ /* set W1C value to clear the interrupt, this hits the register first */ -+ regBuffer[0] = cpu_int_status; -+ /* the remaining 4 values are set to zero which have no-effect */ -+ regBuffer[1] = 0; -+ regBuffer[2] = 0; -+ regBuffer[3] = 0; -+ -+ status = HIFReadWrite(pDev->HIFDevice, -+ CPU_INT_STATUS_ADDRESS, -+ regBuffer, -+ 4, -+ HIF_WR_SYNC_BYTE_FIX, -+ NULL); -+ -+ AR_DEBUG_ASSERT(status == A_OK); -+ return status; -+} -+ -+ -+static A_STATUS DevServiceErrorInterrupt(AR6K_DEVICE *pDev) -+{ -+ A_STATUS status; -+ A_UINT8 error_int_status; -+ A_UINT8 regBuffer[4]; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error Interrupt\n")); -+ error_int_status = pDev->IrqProcRegisters.error_int_status & 0x0F; -+ AR_DEBUG_ASSERT(error_int_status); -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, -+ ("Valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n", -+ error_int_status)); -+ -+ if (ERROR_INT_STATUS_WAKEUP_GET(error_int_status)) { -+ /* Wakeup */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error : Wakeup\n")); -+ } -+ -+ if (ERROR_INT_STATUS_RX_UNDERFLOW_GET(error_int_status)) { -+ /* Rx Underflow */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Rx Underflow\n")); -+ } -+ -+ if (ERROR_INT_STATUS_TX_OVERFLOW_GET(error_int_status)) { -+ /* Tx Overflow */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Tx Overflow\n")); -+ } -+ -+ /* Clear the interrupt */ -+ pDev->IrqProcRegisters.error_int_status &= ~error_int_status; /* W1C */ -+ -+ /* set up the register transfer buffer to hit the register 4 times , this is done -+ * to make the access 4-byte aligned to mitigate issues with host bus interconnects that -+ * restrict bus transfer lengths to be a multiple of 4-bytes */ -+ -+ /* set W1C value to clear the interrupt, this hits the register first */ -+ regBuffer[0] = error_int_status; -+ /* the remaining 4 values are set to zero which have no-effect */ -+ regBuffer[1] = 0; -+ regBuffer[2] = 0; -+ regBuffer[3] = 0; -+ -+ status = HIFReadWrite(pDev->HIFDevice, -+ ERROR_INT_STATUS_ADDRESS, -+ regBuffer, -+ 4, -+ HIF_WR_SYNC_BYTE_FIX, -+ NULL); -+ -+ AR_DEBUG_ASSERT(status == A_OK); -+ return status; -+} -+ -+static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev) -+{ -+ A_UINT32 dummy; -+ A_STATUS status; -+ -+ /* Send a target failure event to the application */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Target debug interrupt\n")); -+ -+ if (pDev->TargetFailureCallback != NULL) { -+ pDev->TargetFailureCallback(pDev->HTCContext); -+ } -+ -+ /* clear the interrupt , the debug error interrupt is -+ * counter 0 */ -+ /* read counter to clear interrupt */ -+ status = HIFReadWrite(pDev->HIFDevice, -+ COUNT_DEC_ADDRESS, -+ (A_UINT8 *)&dummy, -+ 4, -+ HIF_RD_SYNC_BYTE_INC, -+ NULL); -+ -+ AR_DEBUG_ASSERT(status == A_OK); -+ return status; -+} -+ -+static A_STATUS DevServiceCounterInterrupt(AR6K_DEVICE *pDev) -+{ -+ A_UINT8 counter_int_status; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Counter Interrupt\n")); -+ -+ counter_int_status = pDev->IrqProcRegisters.counter_int_status & -+ pDev->IrqEnableRegisters.counter_int_status_enable; -+ -+ AR_DEBUG_ASSERT(counter_int_status); -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, -+ ("Valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n", -+ counter_int_status)); -+ -+ /* Check if the debug interrupt is pending */ -+ if (counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) { -+ return DevServiceDebugInterrupt(pDev); -+ } -+ -+ return A_OK; -+} -+ -+/* callback when our fetch to get interrupt status registers completes */ -+static void DevGetEventAsyncHandler(void *Context, HTC_PACKET *pPacket) -+{ -+ AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; -+ A_UINT32 lookAhead = 0; -+ A_BOOL otherInts = FALSE; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevGetEventAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev)); -+ -+ do { -+ -+ if (A_FAILED(pPacket->Status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ (" GetEvents I/O request failed, status:%d \n", pPacket->Status)); -+ /* bail out, don't unmask HIF interrupt */ -+ break; -+ } -+ -+ if (pDev->GetPendingEventsFunc != NULL) { -+ /* the HIF layer collected the information for us */ -+ HIF_PENDING_EVENTS_INFO *pEvents = (HIF_PENDING_EVENTS_INFO *)pPacket->pBuffer; -+ if (pEvents->Events & HIF_RECV_MSG_AVAIL) { -+ lookAhead = pEvents->LookAhead; -+ if (0 == lookAhead) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler1, lookAhead is zero! \n")); -+ } -+ } -+ if (pEvents->Events & HIF_OTHER_EVENTS) { -+ otherInts = TRUE; -+ } -+ } else { -+ /* standard interrupt table handling.... */ -+ AR6K_IRQ_PROC_REGISTERS *pReg = (AR6K_IRQ_PROC_REGISTERS *)pPacket->pBuffer; -+ A_UINT8 host_int_status; -+ -+ host_int_status = pReg->host_int_status & pDev->IrqEnableRegisters.int_status_enable; -+ -+ if (host_int_status & (1 << HTC_MAILBOX)) { -+ host_int_status &= ~(1 << HTC_MAILBOX); -+ if (pReg->rx_lookahead_valid & (1 << HTC_MAILBOX)) { -+ /* mailbox has a message and the look ahead is valid */ -+ lookAhead = pReg->rx_lookahead[HTC_MAILBOX]; -+ if (0 == lookAhead) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler2, lookAhead is zero! \n")); -+ } -+ } -+ } -+ -+ if (host_int_status) { -+ /* there are other interrupts to handle */ -+ otherInts = TRUE; -+ } -+ } -+ -+ if (otherInts || (lookAhead == 0)) { -+ /* if there are other interrupts to process, we cannot do this in the async handler so -+ * ack the interrupt which will cause our sync handler to run again -+ * if however there are no more messages, we can now ack the interrupt */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, -+ (" Acking interrupt from DevGetEventAsyncHandler (otherints:%d, lookahead:0x%X)\n", -+ otherInts, lookAhead)); -+ HIFAckInterrupt(pDev->HIFDevice); -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, -+ (" DevGetEventAsyncHandler : detected another message, lookahead :0x%X \n", -+ lookAhead)); -+ /* lookahead is non-zero and there are no other interrupts to service, -+ * go get the next message */ -+ pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, NULL); -+ } -+ -+ } while (FALSE); -+ -+ /* free this IO packet */ -+ AR6KFreeIOPacket(pDev,pPacket); -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevGetEventAsyncHandler \n")); -+} -+ -+/* called by the HTC layer when it wants us to check if the device has any more pending -+ * recv messages, this starts off a series of async requests to read interrupt registers */ -+A_STATUS DevCheckPendingRecvMsgsAsync(void *context) -+{ -+ AR6K_DEVICE *pDev = (AR6K_DEVICE *)context; -+ A_STATUS status = A_OK; -+ HTC_PACKET *pIOPacket; -+ -+ /* this is called in an ASYNC only context, we may NOT block, sleep or call any apis that can -+ * cause us to switch contexts */ -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevCheckPendingRecvMsgsAsync: (dev: 0x%X)\n", (A_UINT32)pDev)); -+ -+ do { -+ -+ if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) { -+ /* break the async processing chain right here, no need to continue. -+ * The DevDsrHandler() will handle things in a loop when things are driven -+ * synchronously */ -+ break; -+ } -+ /* first allocate one of our HTC packets we created for async I/O -+ * we reuse HTC packet definitions so that we can use the completion mechanism -+ * in DevRWCompletionHandler() */ -+ pIOPacket = AR6KAllocIOPacket(pDev); -+ -+ if (NULL == pIOPacket) { -+ /* there should be only 1 asynchronous request out at a time to read these registers -+ * so this should actually never happen */ -+ status = A_NO_MEMORY; -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ /* stick in our completion routine when the I/O operation completes */ -+ pIOPacket->Completion = DevGetEventAsyncHandler; -+ pIOPacket->pContext = pDev; -+ -+ if (pDev->GetPendingEventsFunc) { -+ /* HIF layer has it's own mechanism, pass the IO to it.. */ -+ status = pDev->GetPendingEventsFunc(pDev->HIFDevice, -+ (HIF_PENDING_EVENTS_INFO *)pIOPacket->pBuffer, -+ pIOPacket); -+ -+ } else { -+ /* standard way, read the interrupt register table asynchronously again */ -+ status = HIFReadWrite(pDev->HIFDevice, -+ HOST_INT_STATUS_ADDRESS, -+ pIOPacket->pBuffer, -+ AR6K_IRQ_PROC_REGS_SIZE, -+ HIF_RD_ASYNC_BYTE_INC, -+ pIOPacket); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Async IO issued to get interrupt status...\n")); -+ } while (FALSE); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevCheckPendingRecvMsgsAsync \n")); -+ -+ return status; -+} -+ -+/* process pending interrupts synchronously */ -+static A_STATUS ProcessPendingIRQs(AR6K_DEVICE *pDev, A_BOOL *pDone, A_BOOL *pASyncProcessing) -+{ -+ A_STATUS status = A_OK; -+ A_UINT8 host_int_status = 0; -+ A_UINT32 lookAhead = 0; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+ProcessPendingIRQs: (dev: 0x%X)\n", (A_UINT32)pDev)); -+ -+ /*** NOTE: the HIF implementation guarantees that the context of this call allows -+ * us to perform SYNCHRONOUS I/O, that is we can block, sleep or call any API that -+ * can block or switch thread/task ontexts. -+ * This is a fully schedulable context. -+ * */ -+ do { -+ -+ if (pDev->GetPendingEventsFunc != NULL) { -+ HIF_PENDING_EVENTS_INFO events; -+ -+ /* the HIF layer uses a special mechanism to get events -+ * get this synchronously */ -+ status = pDev->GetPendingEventsFunc(pDev->HIFDevice, -+ &events, -+ NULL); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ if (events.Events & HIF_RECV_MSG_AVAIL) { -+ lookAhead = events.LookAhead; -+ if (0 == lookAhead) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs1 lookAhead is zero! \n")); -+ } -+ } -+ -+ if (!(events.Events & HIF_OTHER_EVENTS) || -+ !(pDev->IrqEnableRegisters.int_status_enable & OTHER_INTS_ENABLED)) { -+ /* no need to read the register table, no other interesting interrupts. -+ * Some interfaces (like SPI) can shadow interrupt sources without -+ * requiring the host to do a full table read */ -+ break; -+ } -+ -+ /* otherwise fall through and read the register table */ -+ } -+ -+ /* -+ * Read the first 28 bytes of the HTC register table. This will yield us -+ * the value of different int status registers and the lookahead -+ * registers. -+ * length = sizeof(int_status) + sizeof(cpu_int_status) + -+ * sizeof(error_int_status) + sizeof(counter_int_status) + -+ * sizeof(mbox_frame) + sizeof(rx_lookahead_valid) + -+ * sizeof(hole) + sizeof(rx_lookahead) + -+ * sizeof(int_status_enable) + sizeof(cpu_int_status_enable) + -+ * sizeof(error_status_enable) + -+ * sizeof(counter_int_status_enable); -+ * -+ */ -+ status = HIFReadWrite(pDev->HIFDevice, -+ HOST_INT_STATUS_ADDRESS, -+ (A_UINT8 *)&pDev->IrqProcRegisters, -+ AR6K_IRQ_PROC_REGS_SIZE, -+ HIF_RD_SYNC_BYTE_INC, -+ NULL); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_IRQ)) { -+ DevDumpRegisters(&pDev->IrqProcRegisters, -+ &pDev->IrqEnableRegisters); -+ } -+ -+ /* Update only those registers that are enabled */ -+ host_int_status = pDev->IrqProcRegisters.host_int_status & -+ pDev->IrqEnableRegisters.int_status_enable; -+ -+ if (NULL == pDev->GetPendingEventsFunc) { -+ /* only look at mailbox status if the HIF layer did not provide this function, -+ * on some HIF interfaces reading the RX lookahead is not valid to do */ -+ if (host_int_status & (1 << HTC_MAILBOX)) { -+ /* mask out pending mailbox value, we use "lookAhead" as the real flag for -+ * mailbox processing below */ -+ host_int_status &= ~(1 << HTC_MAILBOX); -+ if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) { -+ /* mailbox has a message and the look ahead is valid */ -+ lookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX]; -+ if (0 == lookAhead) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs2, lookAhead is zero! \n")); -+ } -+ } -+ } -+ } else { -+ /* not valid to check if the HIF has another mechanism for reading mailbox pending status*/ -+ host_int_status &= ~(1 << HTC_MAILBOX); -+ } -+ -+ } while (FALSE); -+ -+ -+ do { -+ -+ /* did the interrupt status fetches succeed? */ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ if ((0 == host_int_status) && (0 == lookAhead)) { -+ /* nothing to process, the caller can use this to break out of a loop */ -+ *pDone = TRUE; -+ break; -+ } -+ -+ if (lookAhead != 0) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Pending mailbox message, LookAhead: 0x%X\n",lookAhead)); -+ /* Mailbox Interrupt, the HTC layer may issue async requests to empty the -+ * mailbox... -+ * When emptying the recv mailbox we use the async handler above called from the -+ * completion routine of the callers read request. This can improve performance -+ * by reducing context switching when we rapidly pull packets */ -+ status = pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, pASyncProcessing); -+ if (A_FAILED(status)) { -+ break; -+ } -+ } -+ -+ /* now handle the rest of them */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, -+ (" Valid interrupt source(s) for OTHER interrupts: 0x%x\n", -+ host_int_status)); -+ -+ if (HOST_INT_STATUS_CPU_GET(host_int_status)) { -+ /* CPU Interrupt */ -+ status = DevServiceCPUInterrupt(pDev); -+ if (A_FAILED(status)){ -+ break; -+ } -+ } -+ -+ if (HOST_INT_STATUS_ERROR_GET(host_int_status)) { -+ /* Error Interrupt */ -+ status = DevServiceErrorInterrupt(pDev); -+ if (A_FAILED(status)){ -+ break; -+ } -+ } -+ -+ if (HOST_INT_STATUS_COUNTER_GET(host_int_status)) { -+ /* Counter Interrupt */ -+ status = DevServiceCounterInterrupt(pDev); -+ if (A_FAILED(status)){ -+ break; -+ } -+ } -+ -+ } while (FALSE); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-ProcessPendingIRQs: (done:%d, async:%d) status=%d \n", -+ *pDone, *pASyncProcessing, status)); -+ -+ return status; -+} -+ -+ -+/* Synchronousinterrupt handler, this handler kicks off all interrupt processing.*/ -+A_STATUS DevDsrHandler(void *context) -+{ -+ AR6K_DEVICE *pDev = (AR6K_DEVICE *)context; -+ A_STATUS status = A_OK; -+ A_BOOL done = FALSE; -+ A_BOOL asyncProc = FALSE; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDsrHandler: (dev: 0x%X)\n", (A_UINT32)pDev)); -+ -+ -+ while (!done) { -+ status = ProcessPendingIRQs(pDev, &done, &asyncProc); -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) { -+ /* the HIF layer does not allow async IRQ processing, override the asyncProc flag */ -+ asyncProc = FALSE; -+ /* this will cause us to re-enter ProcessPendingIRQ() and re-read interrupt status registers. -+ * this has a nice side effect of blocking us until all async read requests are completed. -+ * This behavior is required on some HIF implementations that do not allow ASYNC -+ * processing in interrupt handlers (like Windows CE) */ -+ } -+ -+ if (asyncProc) { -+ /* the function performed some async I/O for performance, we -+ need to exit the ISR immediately, the check below will prevent the interrupt from being -+ Ack'd while we handle it asynchronously */ -+ break; -+ } -+ -+ } -+ -+ if (A_SUCCESS(status) && !asyncProc) { -+ /* Ack the interrupt only if : -+ * 1. we did not get any errors in processing interrupts -+ * 2. there are no outstanding async processing requests */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Acking interrupt from DevDsrHandler \n")); -+ HIFAckInterrupt(pDev->HIFDevice); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDsrHandler \n")); -+ return A_OK; -+} -+ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/ar6k.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/ar6k.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,191 @@ -+/* -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef AR6K_H_ -+#define AR6K_H_ -+ -+#define AR6K_MAILBOXES 4 -+ -+/* HTC runs over mailbox 0 */ -+#define HTC_MAILBOX 0 -+ -+#define AR6K_TARGET_DEBUG_INTR_MASK 0x01 -+ -+#define OTHER_INTS_ENABLED (INT_STATUS_ENABLE_ERROR_MASK | \ -+ INT_STATUS_ENABLE_CPU_MASK | \ -+ INT_STATUS_ENABLE_COUNTER_MASK) -+ -+//#define MBOXHW_UNIT_TEST 1 -+ -+#include "athstartpack.h" -+typedef PREPACK struct _AR6K_IRQ_PROC_REGISTERS { -+ A_UINT8 host_int_status; -+ A_UINT8 cpu_int_status; -+ A_UINT8 error_int_status; -+ A_UINT8 counter_int_status; -+ A_UINT8 mbox_frame; -+ A_UINT8 rx_lookahead_valid; -+ A_UINT8 hole[2]; -+ A_UINT32 rx_lookahead[2]; -+} POSTPACK AR6K_IRQ_PROC_REGISTERS; -+ -+#define AR6K_IRQ_PROC_REGS_SIZE sizeof(AR6K_IRQ_PROC_REGISTERS) -+ -+ -+ -+typedef PREPACK struct _AR6K_IRQ_ENABLE_REGISTERS { -+ A_UINT8 int_status_enable; -+ A_UINT8 cpu_int_status_enable; -+ A_UINT8 error_status_enable; -+ A_UINT8 counter_int_status_enable; -+} POSTPACK AR6K_IRQ_ENABLE_REGISTERS; -+ -+#include "athendpack.h" -+ -+#define AR6K_IRQ_ENABLE_REGS_SIZE sizeof(AR6K_IRQ_ENABLE_REGISTERS) -+ -+#define AR6K_REG_IO_BUFFER_SIZE 32 -+#define AR6K_MAX_REG_IO_BUFFERS 8 -+ -+/* buffers for ASYNC I/O */ -+typedef struct AR6K_ASYNC_REG_IO_BUFFER { -+ HTC_PACKET HtcPacket; /* we use an HTC packet as a wrapper for our async register-based I/O */ -+ A_UINT8 Buffer[AR6K_REG_IO_BUFFER_SIZE]; -+} AR6K_ASYNC_REG_IO_BUFFER; -+ -+typedef struct _AR6K_DEVICE { -+ A_MUTEX_T Lock; -+ AR6K_IRQ_PROC_REGISTERS IrqProcRegisters; -+ AR6K_IRQ_ENABLE_REGISTERS IrqEnableRegisters; -+ void *HIFDevice; -+ A_UINT32 BlockSize; -+ A_UINT32 BlockMask; -+ A_UINT32 MailboxAddress; -+ HIF_PENDING_EVENTS_FUNC GetPendingEventsFunc; -+ void *HTCContext; -+ HTC_PACKET_QUEUE RegisterIOList; -+ AR6K_ASYNC_REG_IO_BUFFER RegIOBuffers[AR6K_MAX_REG_IO_BUFFERS]; -+ void (*TargetFailureCallback)(void *Context); -+ A_STATUS (*MessagePendingCallback)(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc); -+ HIF_DEVICE_IRQ_PROCESSING_MODE HifIRQProcessingMode; -+ HIF_MASK_UNMASK_RECV_EVENT HifMaskUmaskRecvEvent; -+} AR6K_DEVICE; -+ -+#define IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(pDev) ((pDev)->HifIRQProcessingMode != HIF_DEVICE_IRQ_SYNC_ONLY) -+ -+A_STATUS DevSetup(AR6K_DEVICE *pDev); -+A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev); -+A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev); -+A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev, -+ A_UINT32 *pLookAhead, -+ int TimeoutMS); -+A_STATUS DevRWCompletionHandler(void *context, A_STATUS status); -+A_STATUS DevDsrHandler(void *context); -+A_STATUS DevCheckPendingRecvMsgsAsync(void *context); -+void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS *pIrqProcRegs, -+ AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs); -+ -+#define DEV_STOP_RECV_ASYNC TRUE -+#define DEV_STOP_RECV_SYNC FALSE -+#define DEV_ENABLE_RECV_ASYNC TRUE -+#define DEV_ENABLE_RECV_SYNC FALSE -+A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode); -+A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode); -+ -+static INLINE A_STATUS DevSendPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 SendLength) { -+ A_UINT32 paddedLength; -+ A_BOOL sync = (pPacket->Completion == NULL) ? TRUE : FALSE; -+ A_STATUS status; -+ -+ /* adjust the length to be a multiple of block size if appropriate */ -+ paddedLength = (SendLength + (pDev->BlockMask)) & -+ (~(pDev->BlockMask)); -+#if 0 // BufferLength may not be set in , fix this... -+ if (paddedLength > pPacket->BufferLength) { -+ AR_DEBUG_ASSERT(FALSE); -+ if (pPacket->Completion != NULL) { -+ COMPLETE_HTC_PACKET(pPacket,A_EINVAL); -+ } -+ return A_EINVAL; -+ } -+#endif -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, -+ ("DevSendPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n", -+ paddedLength, -+ pDev->MailboxAddress, -+ sync ? "SYNC" : "ASYNC")); -+ -+ status = HIFReadWrite(pDev->HIFDevice, -+ pDev->MailboxAddress, -+ pPacket->pBuffer, -+ paddedLength, /* the padded length */ -+ sync ? HIF_WR_SYNC_BLOCK_INC : HIF_WR_ASYNC_BLOCK_INC, -+ sync ? NULL : pPacket); /* pass the packet as the context to the HIF request */ -+ -+ if (sync) { -+ pPacket->Status = status; -+ } -+ -+ return status; -+} -+ -+static INLINE A_STATUS DevRecvPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 RecvLength) { -+ A_UINT32 paddedLength; -+ A_STATUS status; -+ A_BOOL sync = (pPacket->Completion == NULL) ? TRUE : FALSE; -+ -+ /* adjust the length to be a multiple of block size if appropriate */ -+ paddedLength = (RecvLength + (pDev->BlockMask)) & -+ (~(pDev->BlockMask)); -+ if (paddedLength > pPacket->BufferLength) { -+ AR_DEBUG_ASSERT(FALSE); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("DevRecvPacket, Not enough space for padlen:%d recvlen:%d bufferlen:%d \n", -+ paddedLength,RecvLength,pPacket->BufferLength)); -+ if (pPacket->Completion != NULL) { -+ COMPLETE_HTC_PACKET(pPacket,A_EINVAL); -+ } -+ return A_EINVAL; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, -+ ("DevRecvPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n", -+ paddedLength, -+ pDev->MailboxAddress, -+ sync ? "SYNC" : "ASYNC")); -+ -+ status = HIFReadWrite(pDev->HIFDevice, -+ pDev->MailboxAddress, -+ pPacket->pBuffer, -+ paddedLength, -+ sync ? HIF_RD_SYNC_BLOCK_INC : HIF_RD_ASYNC_BLOCK_INC, -+ sync ? NULL : pPacket); /* pass the packet as the context to the HIF request */ -+ -+ if (sync) { -+ pPacket->Status = status; -+ } -+ -+ return status; -+} -+ -+#ifdef MBOXHW_UNIT_TEST -+A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev); -+#endif -+ -+#endif /*AR6K_H_*/ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,507 @@ -+/* -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "htc_internal.h" -+ -+ -+static HTC_INIT_INFO HTCInitInfo = {NULL,NULL,NULL}; -+static A_BOOL HTCInitialized = FALSE; -+ -+static A_STATUS HTCTargetInsertedHandler(void *hif_handle); -+static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status); -+static void HTCReportFailure(void *Context); -+ -+/* Initializes the HTC layer */ -+A_STATUS HTCInit(HTC_INIT_INFO *pInitInfo) -+{ -+ HTC_CALLBACKS htcCallbacks; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Enter\n")); -+ if (HTCInitialized) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n")); -+ return A_OK; -+ } -+ -+ A_MEMCPY(&HTCInitInfo,pInitInfo,sizeof(HTC_INIT_INFO)); -+ -+ A_MEMZERO(&htcCallbacks, sizeof(HTC_CALLBACKS)); -+ -+ /* setup HIF layer callbacks */ -+ htcCallbacks.deviceInsertedHandler = HTCTargetInsertedHandler; -+ htcCallbacks.deviceRemovedHandler = HTCTargetRemovedHandler; -+ /* the device layer handles these */ -+ htcCallbacks.rwCompletionHandler = DevRWCompletionHandler; -+ htcCallbacks.dsrHandler = DevDsrHandler; -+ HIFInit(&htcCallbacks); -+ HTCInitialized = TRUE; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n")); -+ return A_OK; -+} -+ -+void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList) -+{ -+ LOCK_HTC(target); -+ HTC_PACKET_ENQUEUE(pList,pPacket); -+ UNLOCK_HTC(target); -+} -+ -+HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList) -+{ -+ HTC_PACKET *pPacket; -+ -+ LOCK_HTC(target); -+ pPacket = HTC_PACKET_DEQUEUE(pList); -+ UNLOCK_HTC(target); -+ -+ return pPacket; -+} -+ -+/* cleanup the HTC instance */ -+static void HTCCleanup(HTC_TARGET *target) -+{ -+ if (A_IS_MUTEX_VALID(&target->HTCLock)) { -+ A_MUTEX_DELETE(&target->HTCLock); -+ } -+ -+ if (A_IS_MUTEX_VALID(&target->HTCRxLock)) { -+ A_MUTEX_DELETE(&target->HTCRxLock); -+ } -+ -+ if (A_IS_MUTEX_VALID(&target->HTCTxLock)) { -+ A_MUTEX_DELETE(&target->HTCTxLock); -+ } -+ /* free our instance */ -+ A_FREE(target); -+} -+ -+/* registered target arrival callback from the HIF layer */ -+static A_STATUS HTCTargetInsertedHandler(void *hif_handle) -+{ -+ HTC_TARGET *target = NULL; -+ A_STATUS status; -+ int i; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Enter\n")); -+ -+ do { -+ -+ /* allocate target memory */ -+ if ((target = (HTC_TARGET *)A_MALLOC(sizeof(HTC_TARGET))) == NULL) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to allocate memory\n")); -+ status = A_ERROR; -+ break; -+ } -+ -+ A_MEMZERO(target, sizeof(HTC_TARGET)); -+ A_MUTEX_INIT(&target->HTCLock); -+ A_MUTEX_INIT(&target->HTCRxLock); -+ A_MUTEX_INIT(&target->HTCTxLock); -+ INIT_HTC_PACKET_QUEUE(&target->ControlBufferTXFreeList); -+ INIT_HTC_PACKET_QUEUE(&target->ControlBufferRXFreeList); -+ -+ /* give device layer the hif device handle */ -+ target->Device.HIFDevice = hif_handle; -+ /* give the device layer our context (for event processing) -+ * the device layer will register it's own context with HIF -+ * so we need to set this so we can fetch it in the target remove handler */ -+ target->Device.HTCContext = target; -+ /* set device layer target failure callback */ -+ target->Device.TargetFailureCallback = HTCReportFailure; -+ /* set device layer recv message pending callback */ -+ target->Device.MessagePendingCallback = HTCRecvMessagePendingHandler; -+ target->EpWaitingForBuffers = ENDPOINT_MAX; -+ -+ /* setup device layer */ -+ status = DevSetup(&target->Device); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* carve up buffers/packets for control messages */ -+ for (i = 0; i < NUM_CONTROL_RX_BUFFERS; i++) { -+ HTC_PACKET *pControlPacket; -+ pControlPacket = &target->HTCControlBuffers[i].HtcPacket; -+ SET_HTC_PACKET_INFO_RX_REFILL(pControlPacket, -+ target, -+ target->HTCControlBuffers[i].Buffer, -+ HTC_CONTROL_BUFFER_SIZE, -+ ENDPOINT_0); -+ HTC_FREE_CONTROL_RX(target,pControlPacket); -+ } -+ -+ for (;i < NUM_CONTROL_BUFFERS;i++) { -+ HTC_PACKET *pControlPacket; -+ pControlPacket = &target->HTCControlBuffers[i].HtcPacket; -+ INIT_HTC_PACKET_INFO(pControlPacket, -+ target->HTCControlBuffers[i].Buffer, -+ HTC_CONTROL_BUFFER_SIZE); -+ HTC_FREE_CONTROL_TX(target,pControlPacket); -+ } -+ -+ } while (FALSE); -+ -+ if (A_SUCCESS(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" calling AddInstance callback \n")); -+ /* announce ourselves */ -+ HTCInitInfo.AddInstance((HTC_HANDLE)target); -+ } else { -+ if (target != NULL) { -+ HTCCleanup(target); -+ } -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Exit\n")); -+ -+ return status; -+} -+ -+/* registered removal callback from the HIF layer */ -+static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status) -+{ -+ HTC_TARGET *target; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCTargetRemovedHandler handle:0x%X \n",(A_UINT32)handle)); -+ -+ if (NULL == handle) { -+ /* this could be NULL in the event that target initialization failed */ -+ return A_OK; -+ } -+ -+ target = ((AR6K_DEVICE *)handle)->HTCContext; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" removing target:0x%X instance:0x%X ... \n", -+ (A_UINT32)target, (A_UINT32)target->pInstanceContext)); -+ -+ if (target->pInstanceContext != NULL) { -+ /* let upper layer know, it needs to call HTCStop() */ -+ HTCInitInfo.DeleteInstance(target->pInstanceContext); -+ } -+ -+ HIFShutDownDevice(target->Device.HIFDevice); -+ -+ HTCCleanup(target); -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCTargetRemovedHandler \n")); -+ return A_OK; -+} -+ -+/* get the low level HIF device for the caller , the caller may wish to do low level -+ * HIF requests */ -+void *HTCGetHifDevice(HTC_HANDLE HTCHandle) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ return target->Device.HIFDevice; -+} -+ -+/* set the instance block for this HTC handle, so that on removal, the blob can be -+ * returned to the caller */ -+void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ -+ target->pInstanceContext = Instance; -+} -+ -+/* wait for the target to arrive (sends HTC Ready message) -+ * this operation is fully synchronous and the message is polled for */ -+A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ A_STATUS status; -+ HTC_PACKET *pPacket = NULL; -+ HTC_READY_MSG *pRdyMsg; -+ HTC_SERVICE_CONNECT_REQ connect; -+ HTC_SERVICE_CONNECT_RESP resp; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Enter (target:0x%X) \n", (A_UINT32)target)); -+ -+ do { -+ -+#ifdef MBOXHW_UNIT_TEST -+ -+ status = DoMboxHWTest(&target->Device); -+ -+ if (status != A_OK) { -+ break; -+ } -+ -+#endif -+ -+ /* we should be getting 1 control message that the target is ready */ -+ status = HTCWaitforControlMessage(target, &pPacket); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Target Not Available!!\n")); -+ break; -+ } -+ -+ /* we controlled the buffer creation so it has to be properly aligned */ -+ pRdyMsg = (HTC_READY_MSG *)pPacket->pBuffer; -+ -+ if ((pRdyMsg->MessageID != HTC_MSG_READY_ID) || -+ (pPacket->ActualLength < sizeof(HTC_READY_MSG))) { -+ /* this message is not valid */ -+ AR_DEBUG_ASSERT(FALSE); -+ status = A_EPROTO; -+ break; -+ } -+ -+ if (pRdyMsg->CreditCount == 0 || pRdyMsg->CreditSize == 0) { -+ /* this message is not valid */ -+ AR_DEBUG_ASSERT(FALSE); -+ status = A_EPROTO; -+ break; -+ } -+ -+ target->TargetCredits = pRdyMsg->CreditCount; -+ target->TargetCreditSize = pRdyMsg->CreditSize; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Target Ready: credits: %d credit size: %d\n", -+ target->TargetCredits, target->TargetCreditSize)); -+ -+ /* setup our pseudo HTC control endpoint connection */ -+ A_MEMZERO(&connect,sizeof(connect)); -+ A_MEMZERO(&resp,sizeof(resp)); -+ connect.EpCallbacks.pContext = target; -+ connect.EpCallbacks.EpTxComplete = HTCControlTxComplete; -+ connect.EpCallbacks.EpRecv = HTCControlRecv; -+ connect.EpCallbacks.EpRecvRefill = NULL; /* not needed */ -+ connect.EpCallbacks.EpSendFull = NULL; /* not nedded */ -+ connect.MaxSendQueueDepth = NUM_CONTROL_BUFFERS; -+ connect.ServiceID = HTC_CTRL_RSVD_SVC; -+ -+ /* connect fake service */ -+ status = HTCConnectService((HTC_HANDLE)target, -+ &connect, -+ &resp); -+ -+ if (!A_FAILED(status)) { -+ break; -+ } -+ -+ } while (FALSE); -+ -+ if (pPacket != NULL) { -+ HTC_FREE_CONTROL_RX(target,pPacket); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Exit\n")); -+ -+ return status; -+} -+ -+ -+ -+/* Start HTC, enable interrupts and let the target know host has finished setup */ -+A_STATUS HTCStart(HTC_HANDLE HTCHandle) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ HTC_PACKET *pPacket; -+ A_STATUS status; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Enter\n")); -+ -+ /* now that we are starting, push control receive buffers into the -+ * HTC control endpoint */ -+ -+ while (1) { -+ pPacket = HTC_ALLOC_CONTROL_RX(target); -+ if (NULL == pPacket) { -+ break; -+ } -+ HTCAddReceivePkt((HTC_HANDLE)target,pPacket); -+ } -+ -+ do { -+ -+ AR_DEBUG_ASSERT(target->InitCredits != NULL); -+ AR_DEBUG_ASSERT(target->EpCreditDistributionListHead != NULL); -+ AR_DEBUG_ASSERT(target->EpCreditDistributionListHead->pNext != NULL); -+ -+ /* call init credits callback to do the distribution , -+ * NOTE: the first entry in the distribution list is ENDPOINT_0, so -+ * we pass the start of the list after this one. */ -+ target->InitCredits(target->pCredDistContext, -+ target->EpCreditDistributionListHead->pNext, -+ target->TargetCredits); -+ -+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_TRC)) { -+ DumpCreditDistStates(target); -+ } -+ -+ /* the caller is done connecting to services, so we can indicate to the -+ * target that the setup phase is complete */ -+ status = HTCSendSetupComplete(target); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* unmask interrupts */ -+ status = DevUnmaskInterrupts(&target->Device); -+ -+ if (A_FAILED(status)) { -+ HTCStop(target); -+ } -+ -+ } while (FALSE); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Exit\n")); -+ return status; -+} -+ -+ -+/* stop HTC communications, i.e. stop interrupt reception, and flush all queued buffers */ -+void HTCStop(HTC_HANDLE HTCHandle) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCStop \n")); -+ -+ /* mark that we are shutting down .. */ -+ target->HTCStateFlags |= HTC_STATE_STOPPING; -+ -+ /* Masking interrupts is a synchronous operation, when this function returns -+ * all pending HIF I/O has completed, we can safely flush the queues */ -+ DevMaskInterrupts(&target->Device); -+ -+ /* flush all send packets */ -+ HTCFlushSendPkts(target); -+ /* flush all recv buffers */ -+ HTCFlushRecvBuffers(target); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCStop \n")); -+} -+ -+/* undo what was done in HTCInit() */ -+void HTCShutDown(void) -+{ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCShutDown: \n")); -+ HTCInitialized = FALSE; -+ /* undo HTCInit */ -+ HIFShutDownDevice(NULL); -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCShutDown: \n")); -+} -+ -+void HTCDumpCreditStates(HTC_HANDLE HTCHandle) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ -+ LOCK_HTC_TX(target); -+ -+ DumpCreditDistStates(target); -+ -+ UNLOCK_HTC_TX(target); -+} -+ -+/* report a target failure from the device, this is a callback from the device layer -+ * which uses a mechanism to report errors from the target (i.e. special interrupts) */ -+static void HTCReportFailure(void *Context) -+{ -+ HTC_TARGET *target = (HTC_TARGET *)Context; -+ -+ target->TargetFailure = TRUE; -+ -+ if ((target->pInstanceContext != NULL) && (HTCInitInfo.TargetFailure != NULL)) { -+ /* let upper layer know, it needs to call HTCStop() */ -+ HTCInitInfo.TargetFailure(target->pInstanceContext, A_ERROR); -+ } -+} -+ -+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription) -+{ -+ A_CHAR stream[60]; -+ A_UINT32 i; -+ A_UINT16 offset, count; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<---------Dumping %d Bytes : %s ------>\n", length, pDescription)); -+ -+ count = 0; -+ offset = 0; -+ for(i = 0; i < length; i++) { -+ sprintf(stream + offset, "%2.2X ", buffer[i]); -+ count ++; -+ offset += 3; -+ -+ if(count == 16) { -+ count = 0; -+ offset = 0; -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream)); -+ A_MEMZERO(stream, 60); -+ } -+ } -+ -+ if(offset != 0) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream)); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<------------------------------------------------->\n")); -+} -+ -+A_BOOL HTCGetEndpointStatistics(HTC_HANDLE HTCHandle, -+ HTC_ENDPOINT_ID Endpoint, -+ HTC_ENDPOINT_STAT_ACTION Action, -+ HTC_ENDPOINT_STATS *pStats) -+{ -+ -+#ifdef HTC_EP_STAT_PROFILING -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ A_BOOL clearStats = FALSE; -+ A_BOOL sample = FALSE; -+ -+ switch (Action) { -+ case HTC_EP_STAT_SAMPLE : -+ sample = TRUE; -+ break; -+ case HTC_EP_STAT_SAMPLE_AND_CLEAR : -+ sample = TRUE; -+ clearStats = TRUE; -+ break; -+ case HTC_EP_STAT_CLEAR : -+ clearStats = TRUE; -+ break; -+ default: -+ break; -+ } -+ -+ A_ASSERT(Endpoint < ENDPOINT_MAX); -+ -+ /* lock out TX and RX while we sample and/or clear */ -+ LOCK_HTC_TX(target); -+ LOCK_HTC_RX(target); -+ -+ if (sample) { -+ A_ASSERT(pStats != NULL); -+ /* return the stats to the caller */ -+ A_MEMCPY(pStats, &target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS)); -+ } -+ -+ if (clearStats) { -+ /* reset stats */ -+ A_MEMZERO(&target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS)); -+ } -+ -+ UNLOCK_HTC_RX(target); -+ UNLOCK_HTC_TX(target); -+ -+ return TRUE; -+#else -+ return FALSE; -+#endif -+} -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_debug.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_debug.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,65 @@ -+#ifndef HTC_DEBUG_H_ -+#define HTC_DEBUG_H_ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+/* ------- Debug related stuff ------- */ -+enum { -+ ATH_DEBUG_SEND = 0x0001, -+ ATH_DEBUG_RECV = 0x0002, -+ ATH_DEBUG_SYNC = 0x0004, -+ ATH_DEBUG_DUMP = 0x0008, -+ ATH_DEBUG_IRQ = 0x0010, -+ ATH_DEBUG_TRC = 0x0020, -+ ATH_DEBUG_WARN = 0x0040, -+ ATH_DEBUG_ERR = 0x0080, -+ ATH_DEBUG_ANY = 0xFFFF, -+}; -+ -+#ifdef DEBUG -+ -+// TODO FIX usage of A_PRINTF! -+#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl)) -+#define AR_DEBUG_PRINTBUF(buffer, length, desc) do { \ -+ if (debughtc & ATH_DEBUG_DUMP) { \ -+ DebugDumpBytes(buffer, length,desc); \ -+ } \ -+} while(0) -+#define PRINTX_ARG(arg...) arg -+#define AR_DEBUG_PRINTF(flags, args) do { \ -+ if (debughtc & (flags)) { \ -+ A_PRINTF(KERN_ALERT PRINTX_ARG args); \ -+ } \ -+} while (0) -+#define AR_DEBUG_ASSERT(test) do { \ -+ if (!(test)) { \ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test)); \ -+ } \ -+} while(0) -+extern int debughtc; -+#else -+#define AR_DEBUG_PRINTF(flags, args) -+#define AR_DEBUG_PRINTBUF(buffer, length, desc) -+#define AR_DEBUG_ASSERT(test) -+#define AR_DEBUG_LVL_CHECK(lvl) 0 -+#endif -+ -+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription); -+ -+#endif /*HTC_DEBUG_H_*/ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_internal.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_internal.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,168 @@ -+/* -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef _HTC_INTERNAL_H_ -+#define _HTC_INTERNAL_H_ -+ -+/* for debugging, uncomment this to capture the last frame header, on frame header -+ * processing errors, the last frame header is dump for comparison */ -+//#define HTC_CAPTURE_LAST_FRAME -+ -+//#define HTC_EP_STAT_PROFILING -+ -+#ifdef __cplusplus -+extern "C" { -+#endif /* __cplusplus */ -+ -+/* Header files */ -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "a_osapi.h" -+#include "a_debug.h" -+#include "htc.h" -+#include "htc_api.h" -+#include "bmi_msg.h" -+#include "hif.h" -+#include "ar6k.h" -+ -+/* HTC operational parameters */ -+#define HTC_TARGET_RESPONSE_TIMEOUT 2000 /* in ms */ -+#define HTC_TARGET_DEBUG_INTR_MASK 0x01 -+#define HTC_TARGET_CREDIT_INTR_MASK 0xF0 -+ -+typedef struct _HTC_ENDPOINT { -+ HTC_SERVICE_ID ServiceID; /* service ID this endpoint is bound to -+ non-zero value means this endpoint is in use */ -+ HTC_PACKET_QUEUE TxQueue; /* HTC frame buffer TX queue */ -+ HTC_PACKET_QUEUE RxBuffers; /* HTC frame buffer RX list */ -+ HTC_ENDPOINT_CREDIT_DIST CreditDist; /* credit distribution structure (exposed to driver layer) */ -+ HTC_EP_CALLBACKS EpCallBacks; /* callbacks associated with this endpoint */ -+ int MaxTxQueueDepth; /* max depth of the TX queue before we need to -+ call driver's full handler */ -+ int CurrentTxQueueDepth; /* current TX queue depth */ -+ int MaxMsgLength; /* max length of endpoint message */ -+#ifdef HTC_EP_STAT_PROFILING -+ HTC_ENDPOINT_STATS EndPointStats; /* endpoint statistics */ -+#endif -+} HTC_ENDPOINT; -+ -+#ifdef HTC_EP_STAT_PROFILING -+#define INC_HTC_EP_STAT(p,stat,count) (p)->EndPointStats.stat += (count); -+#else -+#define INC_HTC_EP_STAT(p,stat,count) -+#endif -+ -+#define HTC_SERVICE_TX_PACKET_TAG HTC_TX_PACKET_TAG_INTERNAL -+ -+#define NUM_CONTROL_BUFFERS 8 -+#define NUM_CONTROL_TX_BUFFERS 2 -+#define NUM_CONTROL_RX_BUFFERS (NUM_CONTROL_BUFFERS - NUM_CONTROL_TX_BUFFERS) -+ -+#define HTC_CONTROL_BUFFER_SIZE (HTC_MAX_CONTROL_MESSAGE_LENGTH + HTC_HDR_LENGTH) -+ -+typedef struct HTC_CONTROL_BUFFER { -+ HTC_PACKET HtcPacket; -+ A_UINT8 Buffer[HTC_CONTROL_BUFFER_SIZE]; -+} HTC_CONTROL_BUFFER; -+ -+/* our HTC target state */ -+typedef struct _HTC_TARGET { -+ HTC_ENDPOINT EndPoint[ENDPOINT_MAX]; -+ HTC_CONTROL_BUFFER HTCControlBuffers[NUM_CONTROL_BUFFERS]; -+ HTC_ENDPOINT_CREDIT_DIST *EpCreditDistributionListHead; -+ HTC_PACKET_QUEUE ControlBufferTXFreeList; -+ HTC_PACKET_QUEUE ControlBufferRXFreeList; -+ HTC_CREDIT_DIST_CALLBACK DistributeCredits; -+ HTC_CREDIT_INIT_CALLBACK InitCredits; -+ void *pCredDistContext; -+ int TargetCredits; -+ int TargetCreditSize; -+ A_MUTEX_T HTCLock; -+ A_MUTEX_T HTCRxLock; -+ A_MUTEX_T HTCTxLock; -+ AR6K_DEVICE Device; /* AR6K - specific state */ -+ A_UINT32 HTCStateFlags; -+ HTC_ENDPOINT_ID EpWaitingForBuffers; -+ A_BOOL TargetFailure; -+ void *pInstanceContext; -+#define HTC_STATE_WAIT_BUFFERS (1 << 0) -+#define HTC_STATE_STOPPING (1 << 1) -+#ifdef HTC_CAPTURE_LAST_FRAME -+ HTC_FRAME_HDR LastFrameHdr; /* useful for debugging */ -+ A_UINT8 LastTrailer[256]; -+ A_UINT8 LastTrailerLength; -+#endif -+} HTC_TARGET; -+ -+#define HTC_STOPPING(t) ((t)->HTCStateFlags & HTC_STATE_STOPPING) -+#define LOCK_HTC(t) A_MUTEX_LOCK(&(t)->HTCLock); -+#define UNLOCK_HTC(t) A_MUTEX_UNLOCK(&(t)->HTCLock); -+#define LOCK_HTC_RX(t) A_MUTEX_LOCK(&(t)->HTCRxLock); -+#define UNLOCK_HTC_RX(t) A_MUTEX_UNLOCK(&(t)->HTCRxLock); -+#define LOCK_HTC_TX(t) A_MUTEX_LOCK(&(t)->HTCTxLock); -+#define UNLOCK_HTC_TX(t) A_MUTEX_UNLOCK(&(t)->HTCTxLock); -+ -+#define GET_HTC_TARGET_FROM_HANDLE(hnd) ((HTC_TARGET *)(hnd)) -+#define HTC_RECYCLE_RX_PKT(target,p) \ -+{ \ -+ HTC_PACKET_RESET_RX(pPacket); \ -+ HTCAddReceivePkt((HTC_HANDLE)(target),(p)); \ -+} -+ -+/* internal HTC functions */ -+void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket); -+void HTCControlRecv(void *Context, HTC_PACKET *pPacket); -+A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket); -+HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList); -+void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList); -+A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 Flags); -+A_STATUS HTCIssueRecv(HTC_TARGET *target, HTC_PACKET *pPacket); -+void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket); -+A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc); -+void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint); -+A_STATUS HTCSendSetupComplete(HTC_TARGET *target); -+void HTCFlushRecvBuffers(HTC_TARGET *target); -+void HTCFlushSendPkts(HTC_TARGET *target); -+void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist); -+void DumpCreditDistStates(HTC_TARGET *target); -+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription); -+ -+static INLINE HTC_PACKET *HTC_ALLOC_CONTROL_TX(HTC_TARGET *target) { -+ HTC_PACKET *pPacket = HTCAllocControlBuffer(target,&target->ControlBufferTXFreeList); -+ if (pPacket != NULL) { -+ /* set payload pointer area with some headroom */ -+ pPacket->pBuffer = pPacket->pBufferStart + HTC_HDR_LENGTH; -+ } -+ return pPacket; -+} -+ -+#define HTC_FREE_CONTROL_TX(t,p) HTCFreeControlBuffer((t),(p),&(t)->ControlBufferTXFreeList) -+#define HTC_ALLOC_CONTROL_RX(t) HTCAllocControlBuffer((t),&(t)->ControlBufferRXFreeList) -+#define HTC_FREE_CONTROL_RX(t,p) \ -+{ \ -+ HTC_PACKET_RESET_RX(p); \ -+ HTCFreeControlBuffer((t),(p),&(t)->ControlBufferRXFreeList); \ -+} -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _HTC_INTERNAL_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_recv.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_recv.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,703 @@ -+/* -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "htc_internal.h" -+ -+#define HTCIssueRecv(t, p) \ -+ DevRecvPacket(&(t)->Device, \ -+ (p), \ -+ (p)->ActualLength) -+ -+#define DO_RCV_COMPLETION(t,p,e) \ -+{ \ -+ if ((p)->ActualLength > 0) { \ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" completing packet 0x%X (%d bytes) on ep : %d \n", \ -+ (A_UINT32)(p), (p)->ActualLength, (p)->Endpoint)); \ -+ (e)->EpCallBacks.EpRecv((e)->EpCallBacks.pContext, \ -+ (p)); \ -+ } else { \ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" recycling empty packet \n")); \ -+ HTC_RECYCLE_RX_PKT((t), (p)); \ -+ } \ -+} -+ -+#ifdef HTC_EP_STAT_PROFILING -+#define HTC_RX_STAT_PROFILE(t,ep,lookAhead) \ -+{ \ -+ LOCK_HTC_RX((t)); \ -+ INC_HTC_EP_STAT((ep), RxReceived, 1); \ -+ if ((lookAhead) != 0) { \ -+ INC_HTC_EP_STAT((ep), RxLookAheads, 1); \ -+ } \ -+ UNLOCK_HTC_RX((t)); \ -+} -+#else -+#define HTC_RX_STAT_PROFILE(t,ep,lookAhead) -+#endif -+ -+static INLINE A_STATUS HTCProcessTrailer(HTC_TARGET *target, -+ A_UINT8 *pBuffer, -+ int Length, -+ A_UINT32 *pNextLookAhead, -+ HTC_ENDPOINT_ID FromEndpoint) -+{ -+ HTC_RECORD_HDR *pRecord; -+ A_UINT8 *pRecordBuf; -+ HTC_LOOKAHEAD_REPORT *pLookAhead; -+ A_UINT8 *pOrigBuffer; -+ int origLength; -+ A_STATUS status; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessTrailer (length:%d) \n", Length)); -+ -+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) { -+ AR_DEBUG_PRINTBUF(pBuffer,Length,"Recv Trailer"); -+ } -+ -+ pOrigBuffer = pBuffer; -+ origLength = Length; -+ status = A_OK; -+ -+ while (Length > 0) { -+ -+ if (Length < sizeof(HTC_RECORD_HDR)) { -+ status = A_EPROTO; -+ break; -+ } -+ /* these are byte aligned structs */ -+ pRecord = (HTC_RECORD_HDR *)pBuffer; -+ Length -= sizeof(HTC_RECORD_HDR); -+ pBuffer += sizeof(HTC_RECORD_HDR); -+ -+ if (pRecord->Length > Length) { -+ /* no room left in buffer for record */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ (" invalid record length: %d (id:%d) buffer has: %d bytes left \n", -+ pRecord->Length, pRecord->RecordID, Length)); -+ status = A_EPROTO; -+ break; -+ } -+ /* start of record follows the header */ -+ pRecordBuf = pBuffer; -+ -+ switch (pRecord->RecordID) { -+ case HTC_RECORD_CREDITS: -+ AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_CREDIT_REPORT)); -+ HTCProcessCreditRpt(target, -+ (HTC_CREDIT_REPORT *)pRecordBuf, -+ pRecord->Length / (sizeof(HTC_CREDIT_REPORT)), -+ FromEndpoint); -+ break; -+ case HTC_RECORD_LOOKAHEAD: -+ AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_LOOKAHEAD_REPORT)); -+ pLookAhead = (HTC_LOOKAHEAD_REPORT *)pRecordBuf; -+ if ((pLookAhead->PreValid == ((~pLookAhead->PostValid) & 0xFF)) && -+ (pNextLookAhead != NULL)) { -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, -+ (" LookAhead Report Found (pre valid:0x%X, post valid:0x%X) \n", -+ pLookAhead->PreValid, -+ pLookAhead->PostValid)); -+ -+ /* look ahead bytes are valid, copy them over */ -+ ((A_UINT8 *)pNextLookAhead)[0] = pLookAhead->LookAhead[0]; -+ ((A_UINT8 *)pNextLookAhead)[1] = pLookAhead->LookAhead[1]; -+ ((A_UINT8 *)pNextLookAhead)[2] = pLookAhead->LookAhead[2]; -+ ((A_UINT8 *)pNextLookAhead)[3] = pLookAhead->LookAhead[3]; -+ -+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) { -+ DebugDumpBytes((A_UINT8 *)pNextLookAhead,4,"Next Look Ahead"); -+ } -+ } -+ break; -+ default: -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" unhandled record: id:%d length:%d \n", -+ pRecord->RecordID, pRecord->Length)); -+ break; -+ } -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* advance buffer past this record for next time around */ -+ pBuffer += pRecord->Length; -+ Length -= pRecord->Length; -+ } -+ -+ if (A_FAILED(status)) { -+ DebugDumpBytes(pOrigBuffer,origLength,"BAD Recv Trailer"); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessTrailer \n")); -+ return status; -+ -+} -+ -+/* process a received message (i.e. strip off header, process any trailer data) -+ * note : locks must be released when this function is called */ -+static A_STATUS HTCProcessRecvHeader(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT32 *pNextLookAhead) -+{ -+ A_UINT8 temp; -+ A_UINT8 *pBuf; -+ A_STATUS status = A_OK; -+ A_UINT16 payloadLen; -+ A_UINT32 lookAhead; -+ -+ pBuf = pPacket->pBuffer; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessRecvHeader \n")); -+ -+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) { -+ AR_DEBUG_PRINTBUF(pBuf,pPacket->ActualLength,"HTC Recv PKT"); -+ } -+ -+ do { -+ /* note, we cannot assume the alignment of pBuffer, so we use the safe macros to -+ * retrieve 16 bit fields */ -+ payloadLen = A_GET_UINT16_FIELD(pBuf, HTC_FRAME_HDR, PayloadLen); -+ -+ ((A_UINT8 *)&lookAhead)[0] = pBuf[0]; -+ ((A_UINT8 *)&lookAhead)[1] = pBuf[1]; -+ ((A_UINT8 *)&lookAhead)[2] = pBuf[2]; -+ ((A_UINT8 *)&lookAhead)[3] = pBuf[3]; -+ -+ if (lookAhead != pPacket->HTCReserved) { -+ /* somehow the lookahead that gave us the full read length did not -+ * reflect the actual header in the pending message */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("HTCProcessRecvHeader, lookahead mismatch! \n")); -+ DebugDumpBytes((A_UINT8 *)&pPacket->HTCReserved,4,"Expected Message LookAhead"); -+ DebugDumpBytes(pBuf,sizeof(HTC_FRAME_HDR),"Current Frame Header"); -+#ifdef HTC_CAPTURE_LAST_FRAME -+ DebugDumpBytes((A_UINT8 *)&target->LastFrameHdr,sizeof(HTC_FRAME_HDR),"Last Frame Header"); -+ if (target->LastTrailerLength != 0) { -+ DebugDumpBytes(target->LastTrailer, -+ target->LastTrailerLength, -+ "Last trailer"); -+ } -+#endif -+ status = A_EPROTO; -+ break; -+ } -+ -+ /* get flags */ -+ temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, Flags); -+ -+ if (temp & HTC_FLAGS_RECV_TRAILER) { -+ /* this packet has a trailer */ -+ -+ /* extract the trailer length in control byte 0 */ -+ temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, ControlBytes[0]); -+ -+ if ((temp < sizeof(HTC_RECORD_HDR)) || (temp > payloadLen)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("HTCProcessRecvHeader, invalid header (payloadlength should be :%d, CB[0] is:%d) \n", -+ payloadLen, temp)); -+ status = A_EPROTO; -+ break; -+ } -+ -+ /* process trailer data that follows HDR + application payload */ -+ status = HTCProcessTrailer(target, -+ (pBuf + HTC_HDR_LENGTH + payloadLen - temp), -+ temp, -+ pNextLookAhead, -+ pPacket->Endpoint); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+#ifdef HTC_CAPTURE_LAST_FRAME -+ A_MEMCPY(target->LastTrailer, (pBuf + HTC_HDR_LENGTH + payloadLen - temp), temp); -+ target->LastTrailerLength = temp; -+#endif -+ /* trim length by trailer bytes */ -+ pPacket->ActualLength -= temp; -+ } -+#ifdef HTC_CAPTURE_LAST_FRAME -+ else { -+ target->LastTrailerLength = 0; -+ } -+#endif -+ -+ /* if we get to this point, the packet is good */ -+ /* remove header and adjust length */ -+ pPacket->pBuffer += HTC_HDR_LENGTH; -+ pPacket->ActualLength -= HTC_HDR_LENGTH; -+ -+ } while (FALSE); -+ -+ if (A_FAILED(status)) { -+ /* dump the whole packet */ -+ DebugDumpBytes(pBuf,pPacket->ActualLength,"BAD HTC Recv PKT"); -+ } else { -+#ifdef HTC_CAPTURE_LAST_FRAME -+ A_MEMCPY(&target->LastFrameHdr,pBuf,sizeof(HTC_FRAME_HDR)); -+#endif -+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) { -+ if (pPacket->ActualLength > 0) { -+ AR_DEBUG_PRINTBUF(pPacket->pBuffer,pPacket->ActualLength,"HTC - Application Msg"); -+ } -+ } -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessRecvHeader \n")); -+ return status; -+} -+ -+/* asynchronous completion handler for recv packet fetching, when the device layer -+ * completes a read request, it will call this completion handler */ -+void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket) -+{ -+ HTC_TARGET *target = (HTC_TARGET *)Context; -+ HTC_ENDPOINT *pEndpoint; -+ A_UINT32 nextLookAhead = 0; -+ A_STATUS status; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCRecvCompleteHandler (status:%d, ep:%d) \n", -+ pPacket->Status, pPacket->Endpoint)); -+ -+ AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX); -+ pEndpoint = &target->EndPoint[pPacket->Endpoint]; -+ pPacket->Completion = NULL; -+ -+ /* get completion status */ -+ status = pPacket->Status; -+ -+ do { -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HTCRecvCompleteHandler: request failed (status:%d, ep:%d) \n", -+ pPacket->Status, pPacket->Endpoint)); -+ break; -+ } -+ /* process the header for any trailer data */ -+ status = HTCProcessRecvHeader(target,pPacket,&nextLookAhead); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ /* was there a lookahead for the next packet? */ -+ if (nextLookAhead != 0) { -+ A_STATUS nextStatus; -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, -+ ("HTCRecvCompleteHandler - next look ahead was non-zero : 0x%X \n", -+ nextLookAhead)); -+ /* we have another packet, get the next packet fetch started (pipelined) before -+ * we call into the endpoint's callback, this will start another async request */ -+ nextStatus = HTCRecvMessagePendingHandler(target,nextLookAhead,NULL); -+ if (A_EPROTO == nextStatus) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("Next look ahead from recv header was INVALID\n")); -+ DebugDumpBytes((A_UINT8 *)&nextLookAhead, -+ 4, -+ "BAD lookahead from lookahead report"); -+ } -+ } else { -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, -+ ("HTCRecvCompleteHandler - rechecking for more messages...\n")); -+ /* if we did not get anything on the look-ahead, -+ * call device layer to asynchronously re-check for messages. If we can keep the async -+ * processing going we get better performance. If there is a pending message we will keep processing -+ * messages asynchronously which should pipeline things nicely */ -+ DevCheckPendingRecvMsgsAsync(&target->Device); -+ } -+ -+ HTC_RX_STAT_PROFILE(target,pEndpoint,nextLookAhead); -+ DO_RCV_COMPLETION(target,pPacket,pEndpoint); -+ -+ } while (FALSE); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("HTCRecvCompleteHandler , message fetch failed (status = %d) \n", -+ status)); -+ /* recyle this packet */ -+ HTC_RECYCLE_RX_PKT(target, pPacket); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCRecvCompleteHandler\n")); -+} -+ -+/* synchronously wait for a control message from the target, -+ * This function is used at initialization time ONLY. At init messages -+ * on ENDPOINT 0 are expected. */ -+A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket) -+{ -+ A_STATUS status; -+ A_UINT32 lookAhead; -+ HTC_PACKET *pPacket = NULL; -+ HTC_FRAME_HDR *pHdr; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCWaitforControlMessage \n")); -+ -+ do { -+ -+ *ppControlPacket = NULL; -+ -+ /* call the polling function to see if we have a message */ -+ status = DevPollMboxMsgRecv(&target->Device, -+ &lookAhead, -+ HTC_TARGET_RESPONSE_TIMEOUT); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, -+ ("HTCWaitforControlMessage : lookAhead : 0x%X \n", lookAhead)); -+ -+ /* check the lookahead */ -+ pHdr = (HTC_FRAME_HDR *)&lookAhead; -+ -+ if (pHdr->EndpointID != ENDPOINT_0) { -+ /* unexpected endpoint number, should be zero */ -+ AR_DEBUG_ASSERT(FALSE); -+ status = A_EPROTO; -+ break; -+ } -+ -+ if (A_FAILED(status)) { -+ /* bad message */ -+ AR_DEBUG_ASSERT(FALSE); -+ status = A_EPROTO; -+ break; -+ } -+ -+ pPacket = HTC_ALLOC_CONTROL_RX(target); -+ -+ if (pPacket == NULL) { -+ AR_DEBUG_ASSERT(FALSE); -+ status = A_NO_MEMORY; -+ break; -+ } -+ -+ pPacket->HTCReserved = lookAhead; -+ pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH; -+ -+ if (pPacket->ActualLength > pPacket->BufferLength) { -+ AR_DEBUG_ASSERT(FALSE); -+ status = A_EPROTO; -+ break; -+ } -+ -+ /* we want synchronous operation */ -+ pPacket->Completion = NULL; -+ -+ /* get the message from the device, this will block */ -+ status = HTCIssueRecv(target, pPacket); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* process receive header */ -+ status = HTCProcessRecvHeader(target,pPacket,NULL); -+ -+ pPacket->Status = status; -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("HTCWaitforControlMessage, HTCProcessRecvHeader failed (status = %d) \n", -+ status)); -+ break; -+ } -+ -+ /* give the caller this control message packet, they are responsible to free */ -+ *ppControlPacket = pPacket; -+ -+ } while (FALSE); -+ -+ if (A_FAILED(status)) { -+ if (pPacket != NULL) { -+ /* cleanup buffer on error */ -+ HTC_FREE_CONTROL_RX(target,pPacket); -+ } -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCWaitforControlMessage \n")); -+ -+ return status; -+} -+ -+/* callback when device layer or lookahead report parsing detects a pending message */ -+A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc) -+{ -+ HTC_TARGET *target = (HTC_TARGET *)Context; -+ A_STATUS status = A_OK; -+ HTC_PACKET *pPacket = NULL; -+ HTC_FRAME_HDR *pHdr; -+ HTC_ENDPOINT *pEndpoint; -+ A_BOOL asyncProc = FALSE; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCRecvMessagePendingHandler LookAhead:0x%X \n",LookAhead)); -+ -+ if (IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(&target->Device)) { -+ /* We use async mode to get the packets if the device layer supports it. -+ * The device layer interfaces with HIF in which HIF may have restrictions on -+ * how interrupts are processed */ -+ asyncProc = TRUE; -+ } -+ -+ if (pAsyncProc != NULL) { -+ /* indicate to caller how we decided to process this */ -+ *pAsyncProc = asyncProc; -+ } -+ -+ while (TRUE) { -+ -+ pHdr = (HTC_FRAME_HDR *)&LookAhead; -+ -+ if (pHdr->EndpointID >= ENDPOINT_MAX) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid Endpoint in look-ahead: %d \n",pHdr->EndpointID)); -+ /* invalid endpoint */ -+ status = A_EPROTO; -+ break; -+ } -+ -+ if (pHdr->PayloadLen > HTC_MAX_PAYLOAD_LENGTH) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Payload length %d exceeds max HTC : %d !\n", -+ pHdr->PayloadLen, HTC_MAX_PAYLOAD_LENGTH)); -+ status = A_EPROTO; -+ break; -+ } -+ -+ pEndpoint = &target->EndPoint[pHdr->EndpointID]; -+ -+ if (0 == pEndpoint->ServiceID) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Endpoint %d is not connected !\n",pHdr->EndpointID)); -+ /* endpoint isn't even connected */ -+ status = A_EPROTO; -+ break; -+ } -+ -+ /* lock RX to get a buffer */ -+ LOCK_HTC_RX(target); -+ -+ /* get a packet from the endpoint recv queue */ -+ pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers); -+ -+ if (NULL == pPacket) { -+ /* check for refill handler */ -+ if (pEndpoint->EpCallBacks.EpRecvRefill != NULL) { -+ UNLOCK_HTC_RX(target); -+ /* call the re-fill handler */ -+ pEndpoint->EpCallBacks.EpRecvRefill(pEndpoint->EpCallBacks.pContext, -+ pHdr->EndpointID); -+ LOCK_HTC_RX(target); -+ /* check if we have more buffers */ -+ pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers); -+ /* fall through */ -+ } -+ } -+ -+ if (NULL == pPacket) { -+ /* this is not an error, we simply need to mark that we are waiting for buffers.*/ -+ target->HTCStateFlags |= HTC_STATE_WAIT_BUFFERS; -+ target->EpWaitingForBuffers = pHdr->EndpointID; -+ status = A_NO_MEMORY; -+ } -+ -+ UNLOCK_HTC_RX(target); -+ -+ if (A_FAILED(status)) { -+ /* no buffers */ -+ break; -+ } -+ -+ AR_DEBUG_ASSERT(pPacket->Endpoint == pHdr->EndpointID); -+ -+ /* make sure this message can fit in the endpoint buffer */ -+ if ((pHdr->PayloadLen + HTC_HDR_LENGTH) > pPacket->BufferLength) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("Payload Length Error : header reports payload of: %d, endpoint buffer size: %d \n", -+ pHdr->PayloadLen, pPacket->BufferLength)); -+ status = A_EPROTO; -+ break; -+ } -+ -+ pPacket->HTCReserved = LookAhead; /* set expected look ahead */ -+ /* set the amount of data to fetch */ -+ pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH; -+ -+ if (asyncProc) { -+ /* we use async mode to get the packet if the device layer supports it -+ * set our callback and context */ -+ pPacket->Completion = HTCRecvCompleteHandler; -+ pPacket->pContext = target; -+ } else { -+ /* fully synchronous */ -+ pPacket->Completion = NULL; -+ } -+ -+ /* go fetch the packet */ -+ status = HTCIssueRecv(target, pPacket); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ if (asyncProc) { -+ /* we did this asynchronously so we can get out of the loop, the asynch processing -+ * creates a chain of requests to continue processing pending messages in the -+ * context of callbacks */ -+ break; -+ } -+ -+ /* in the sync case, we process the packet, check lookaheads and then repeat */ -+ -+ LookAhead = 0; -+ status = HTCProcessRecvHeader(target,pPacket,&LookAhead); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ HTC_RX_STAT_PROFILE(target,pEndpoint,LookAhead); -+ DO_RCV_COMPLETION(target,pPacket,pEndpoint); -+ -+ pPacket = NULL; -+ -+ if (0 == LookAhead) { -+ break; -+ } -+ -+ } -+ -+ if (A_NO_MEMORY == status) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ (" Endpoint :%d has no buffers, blocking receiver to prevent overrun.. \n", -+ pHdr->EndpointID)); -+ /* try to stop receive at the device layer */ -+ DevStopRecv(&target->Device, asyncProc ? DEV_STOP_RECV_ASYNC : DEV_STOP_RECV_SYNC); -+ status = A_OK; -+ } else if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("Failed to get pending message : LookAhead Value: 0x%X (status = %d) \n", -+ LookAhead, status)); -+ if (pPacket != NULL) { -+ /* clean up packet on error */ -+ HTC_RECYCLE_RX_PKT(target, pPacket); -+ } -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCRecvMessagePendingHandler \n")); -+ -+ return status; -+} -+ -+/* Makes a buffer available to the HTC module */ -+A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ HTC_ENDPOINT *pEndpoint; -+ A_BOOL unblockRecv = FALSE; -+ A_STATUS status = A_OK; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, -+ ("+- HTCAddReceivePkt: endPointId: %d, buffer: 0x%X, length: %d\n", -+ pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->BufferLength)); -+ -+ do { -+ -+ if (HTC_STOPPING(target)) { -+ status = A_ECANCELED; -+ break; -+ } -+ -+ AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX); -+ -+ pEndpoint = &target->EndPoint[pPacket->Endpoint]; -+ -+ LOCK_HTC_RX(target); -+ -+ /* store receive packet */ -+ HTC_PACKET_ENQUEUE(&pEndpoint->RxBuffers, pPacket); -+ -+ /* check if we are blocked waiting for a new buffer */ -+ if (target->HTCStateFlags & HTC_STATE_WAIT_BUFFERS) { -+ if (target->EpWaitingForBuffers == pPacket->Endpoint) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" receiver was blocked on ep:%d, unblocking.. \n", -+ target->EpWaitingForBuffers)); -+ target->HTCStateFlags &= ~HTC_STATE_WAIT_BUFFERS; -+ target->EpWaitingForBuffers = ENDPOINT_MAX; -+ unblockRecv = TRUE; -+ } -+ } -+ -+ UNLOCK_HTC_RX(target); -+ -+ if (unblockRecv && !HTC_STOPPING(target)) { -+ /* TODO : implement a buffer threshold count? */ -+ DevEnableRecv(&target->Device,DEV_ENABLE_RECV_SYNC); -+ } -+ -+ } while (FALSE); -+ -+ return status; -+} -+ -+static void HTCFlushEndpointRX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint) -+{ -+ HTC_PACKET *pPacket; -+ -+ LOCK_HTC_RX(target); -+ -+ while (1) { -+ pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers); -+ if (NULL == pPacket) { -+ break; -+ } -+ UNLOCK_HTC_RX(target); -+ pPacket->Status = A_ECANCELED; -+ pPacket->ActualLength = 0; -+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" Flushing RX packet:0x%X, length:%d, ep:%d \n", -+ (A_UINT32)pPacket, pPacket->BufferLength, pPacket->Endpoint)); -+ /* give the packet back */ -+ pEndpoint->EpCallBacks.EpRecv(pEndpoint->EpCallBacks.pContext, -+ pPacket); -+ LOCK_HTC_RX(target); -+ } -+ -+ UNLOCK_HTC_RX(target); -+ -+ -+} -+ -+void HTCFlushRecvBuffers(HTC_TARGET *target) -+{ -+ HTC_ENDPOINT *pEndpoint; -+ int i; -+ -+ /* NOTE: no need to flush endpoint 0, these buffers were -+ * allocated as part of the HTC struct */ -+ for (i = ENDPOINT_1; i < ENDPOINT_MAX; i++) { -+ pEndpoint = &target->EndPoint[i]; -+ if (pEndpoint->ServiceID == 0) { -+ /* not in use.. */ -+ continue; -+ } -+ HTCFlushEndpointRX(target,pEndpoint); -+ } -+ -+ -+} -+ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_send.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_send.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,543 @@ -+/* -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "htc_internal.h" -+ -+#define DO_EP_TX_COMPLETION(ep,p) \ -+{ \ -+ (p)->Completion = NULL; \ -+ (ep)->EpCallBacks.EpTxComplete((ep)->EpCallBacks.pContext,(p)); \ -+} -+ -+ -+/* call the distribute credits callback with the distribution */ -+#define DO_DISTRIBUTION(t,reason,description,pList) \ -+{ \ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, \ -+ (" calling distribute function (%s) (dfn:0x%X, ctxt:0x%X, dist:0x%X) \n", \ -+ (description), \ -+ (A_UINT32)(t)->DistributeCredits, \ -+ (A_UINT32)(t)->pCredDistContext, \ -+ (A_UINT32)pList)); \ -+ (t)->DistributeCredits((t)->pCredDistContext, \ -+ (pList), \ -+ (reason)); \ -+} -+ -+/* our internal send packet completion handler when packets are submited to the AR6K device -+ * layer */ -+static void HTCSendPktCompletionHandler(void *Context, HTC_PACKET *pPacket) -+{ -+ HTC_TARGET *target = (HTC_TARGET *)Context; -+ HTC_ENDPOINT *pEndpoint = &target->EndPoint[pPacket->Endpoint]; -+ -+ -+ if (A_FAILED(pPacket->Status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("HTCSendPktCompletionHandler: request failed (status:%d, ep:%d) \n", -+ pPacket->Status, pPacket->Endpoint)); -+ } -+ /* first, fixup the head room we allocated */ -+ pPacket->pBuffer += HTC_HDR_LENGTH; -+ /* do completion */ -+ DO_EP_TX_COMPLETION(pEndpoint,pPacket); -+} -+ -+A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 SendFlags) -+{ -+ A_STATUS status; -+ A_UINT8 *pHdrBuf; -+ A_BOOL sync = FALSE; -+ -+ /* caller always provides headrooom */ -+ pPacket->pBuffer -= HTC_HDR_LENGTH; -+ pHdrBuf = pPacket->pBuffer; -+ /* setup frame header */ -+ A_SET_UINT16_FIELD(pHdrBuf,HTC_FRAME_HDR,PayloadLen,(A_UINT16)pPacket->ActualLength); -+ A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,Flags,SendFlags); -+ A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,EndpointID, (A_UINT8)pPacket->Endpoint); -+ -+ if (pPacket->Completion == NULL) { -+ /* mark that this request was synchronously issued */ -+ sync = TRUE; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, -+ ("+-HTCIssueSend: transmit length : %d (%s) \n", -+ pPacket->ActualLength + HTC_HDR_LENGTH, -+ sync ? "SYNC" : "ASYNC" )); -+ -+ /* send message to device */ -+ status = DevSendPacket(&target->Device, -+ pPacket, -+ pPacket->ActualLength + HTC_HDR_LENGTH); -+ -+ if (sync) { -+ /* use local sync variable. If this was issued asynchronously, pPacket is no longer -+ * safe to access. */ -+ pPacket->pBuffer += HTC_HDR_LENGTH; -+ } -+ -+ /* if this request was asynchronous, the packet completion routine will be invoked by -+ * the device layer when the HIF layer completes the request */ -+ -+ return status; -+} -+ -+/* try to send the current packet or a packet at the head of the TX queue, -+ * if there are no credits, the packet remains in the queue. -+ * this function always succeeds and returns a flag if the TX queue for -+ * the endpoint has hit the set limit */ -+static A_BOOL HTCTrySend(HTC_TARGET *target, -+ HTC_ENDPOINT *pEndpoint, -+ HTC_PACKET *pPacketToSend) -+{ -+ HTC_PACKET *pPacket; -+ int creditsRequired; -+ int remainder; -+ A_UINT8 sendFlags; -+ A_BOOL epFull = FALSE; -+ -+ LOCK_HTC_TX(target); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("+HTCTrySend (pPkt:0x%X)\n",(A_UINT32)pPacketToSend)); -+ -+ if (pPacketToSend != NULL) { -+ /* caller supplied us a packet to queue to the tail of the HTC TX queue before -+ * we check the tx queue */ -+ HTC_PACKET_ENQUEUE(&pEndpoint->TxQueue,pPacketToSend); -+ pEndpoint->CurrentTxQueueDepth++; -+ } -+ -+ /* now drain the TX queue for transmission as long as we have enough -+ * credits */ -+ -+ while (1) { -+ -+ if (HTC_QUEUE_EMPTY(&pEndpoint->TxQueue)) { -+ /* nothing in the queue */ -+ break; -+ } -+ -+ sendFlags = 0; -+ -+ /* get packet at head, but don't remove it */ -+ pPacket = HTC_GET_PKT_AT_HEAD(&pEndpoint->TxQueue); -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Got head packet:0x%X , Queue Depth: %d\n", -+ (A_UINT32)pPacket, pEndpoint->CurrentTxQueueDepth)); -+ -+ /* figure out how many credits this message requires */ -+ creditsRequired = (pPacket->ActualLength + HTC_HDR_LENGTH) / target->TargetCreditSize; -+ remainder = (pPacket->ActualLength + HTC_HDR_LENGTH) % target->TargetCreditSize; -+ -+ if (remainder) { -+ creditsRequired++; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Creds Required:%d Got:%d\n", -+ creditsRequired, pEndpoint->CreditDist.TxCredits)); -+ -+ if (pEndpoint->CreditDist.TxCredits < creditsRequired) { -+ -+ /* not enough credits */ -+ -+ if (pPacket->Endpoint == ENDPOINT_0) { -+ /* leave it in the queue */ -+ break; -+ } -+ /* invoke the registered distribution function only if this is not -+ * endpoint 0, we let the driver layer provide more credits if it can. -+ * We pass the credit distribution list starting at the endpoint in question -+ * */ -+ -+ /* set how many credits we need */ -+ pEndpoint->CreditDist.TxCreditsSeek = -+ creditsRequired - pEndpoint->CreditDist.TxCredits; -+ DO_DISTRIBUTION(target, -+ HTC_CREDIT_DIST_SEEK_CREDITS, -+ "Seek Credits", -+ &pEndpoint->CreditDist); -+ -+ pEndpoint->CreditDist.TxCreditsSeek = 0; -+ -+ if (pEndpoint->CreditDist.TxCredits < creditsRequired) { -+ /* still not enough credits to send, leave packet in the queue */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, -+ (" Not enough credits for ep %d leaving packet in queue..\n", -+ pPacket->Endpoint)); -+ break; -+ } -+ -+ } -+ -+ pEndpoint->CreditDist.TxCredits -= creditsRequired; -+ INC_HTC_EP_STAT(pEndpoint, TxCreditsConsummed, creditsRequired); -+ -+ /* check if we need credits */ -+ if (pEndpoint->CreditDist.TxCredits < pEndpoint->CreditDist.TxCreditsPerMaxMsg) { -+ sendFlags |= HTC_FLAGS_NEED_CREDIT_UPDATE; -+ INC_HTC_EP_STAT(pEndpoint, TxCreditLowIndications, 1); -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Host Needs Credits \n")); -+ } -+ -+ /* now we can fully dequeue */ -+ pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->TxQueue); -+ pEndpoint->CurrentTxQueueDepth--; -+ -+ INC_HTC_EP_STAT(pEndpoint, TxIssued, 1); -+ -+ UNLOCK_HTC_TX(target); -+ -+ HTCIssueSend(target, pPacket, sendFlags); -+ -+ LOCK_HTC_TX(target); -+ -+ /* go back and check for more messages */ -+ } -+ -+ if (pEndpoint->CurrentTxQueueDepth >= pEndpoint->MaxTxQueueDepth) { -+ /* let caller know that this endpoint has reached the maximum depth */ -+ epFull = TRUE; -+ } -+ -+ UNLOCK_HTC_TX(target); -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("-HTCTrySend: \n")); -+ return epFull; -+} -+ -+/* HTC API - HTCSendPkt */ -+A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ HTC_ENDPOINT *pEndpoint; -+ HTC_ENDPOINT_ID ep; -+ A_STATUS status = A_OK; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, -+ ("+HTCSendPkt: Enter endPointId: %d, buffer: 0x%X, length: %d \n", -+ pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->ActualLength)); -+ -+ ep = pPacket->Endpoint; -+ AR_DEBUG_ASSERT(ep < ENDPOINT_MAX); -+ pEndpoint = &target->EndPoint[ep]; -+ -+ do { -+ -+ if (HTC_STOPPING(target)) { -+ status = A_ECANCELED; -+ pPacket->Status = status; -+ DO_EP_TX_COMPLETION(pEndpoint,pPacket); -+ break; -+ } -+ /* everything sent through this interface is asynchronous */ -+ /* fill in HTC completion routines */ -+ pPacket->Completion = HTCSendPktCompletionHandler; -+ pPacket->pContext = target; -+ -+ if (HTCTrySend(target, pEndpoint, pPacket)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d, TX queue is full, Depth:%d, Max:%d \n", -+ ep, pEndpoint->CurrentTxQueueDepth, pEndpoint->MaxTxQueueDepth)); -+ /* queue is now full, let caller know */ -+ if (pEndpoint->EpCallBacks.EpSendFull != NULL) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Calling driver's send full callback.... \n")); -+ pEndpoint->EpCallBacks.EpSendFull(pEndpoint->EpCallBacks.pContext, -+ ep); -+ } -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCSendPkt \n")); -+ } while (FALSE); -+ -+ return status; -+} -+ -+ -+/* check TX queues to drain because of credit distribution update */ -+static INLINE void HTCCheckEndpointTxQueues(HTC_TARGET *target) -+{ -+ HTC_ENDPOINT *pEndpoint; -+ HTC_ENDPOINT_CREDIT_DIST *pDistItem; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCCheckEndpointTxQueues \n")); -+ pDistItem = target->EpCreditDistributionListHead; -+ -+ /* run through the credit distribution list to see -+ * if there are packets queued -+ * NOTE: no locks need to be taken since the distribution list -+ * is not dynamic (cannot be re-ordered) and we are not modifying any state */ -+ while (pDistItem != NULL) { -+ pEndpoint = (HTC_ENDPOINT *)pDistItem->pHTCReserved; -+ -+ if (pEndpoint->CurrentTxQueueDepth > 0) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Ep %d has %d credits and %d Packets in TX Queue \n", -+ pDistItem->Endpoint, pEndpoint->CreditDist.TxCredits, pEndpoint->CurrentTxQueueDepth)); -+ /* try to start the stalled queue, this list is ordered by priority. -+ * Highest priority queue get's processed first, if there are credits available the -+ * highest priority queue will get a chance to reclaim credits from lower priority -+ * ones */ -+ HTCTrySend(target, pEndpoint, NULL); -+ } -+ -+ pDistItem = pDistItem->pNext; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCCheckEndpointTxQueues \n")); -+} -+ -+/* process credit reports and call distribution function */ -+void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint) -+{ -+ int i; -+ HTC_ENDPOINT *pEndpoint; -+ int totalCredits = 0; -+ A_BOOL doDist = FALSE; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCProcessCreditRpt, Credit Report Entries:%d \n", NumEntries)); -+ -+ /* lock out TX while we update credits */ -+ LOCK_HTC_TX(target); -+ -+ for (i = 0; i < NumEntries; i++, pRpt++) { -+ if (pRpt->EndpointID >= ENDPOINT_MAX) { -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ pEndpoint = &target->EndPoint[pRpt->EndpointID]; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d got %d credits \n", -+ pRpt->EndpointID, pRpt->Credits)); -+ -+ -+#ifdef HTC_EP_STAT_PROFILING -+ -+ INC_HTC_EP_STAT(pEndpoint, TxCreditRpts, 1); -+ INC_HTC_EP_STAT(pEndpoint, TxCreditsReturned, pRpt->Credits); -+ -+ if (FromEndpoint == pRpt->EndpointID) { -+ /* this credit report arrived on the same endpoint indicating it arrived in an RX -+ * packet */ -+ INC_HTC_EP_STAT(pEndpoint, TxCreditsFromRx, pRpt->Credits); -+ INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromRx, 1); -+ } else if (FromEndpoint == ENDPOINT_0) { -+ /* this credit arrived on endpoint 0 as a NULL message */ -+ INC_HTC_EP_STAT(pEndpoint, TxCreditsFromEp0, pRpt->Credits); -+ INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromEp0, 1); -+ } else { -+ /* arrived on another endpoint */ -+ INC_HTC_EP_STAT(pEndpoint, TxCreditsFromOther, pRpt->Credits); -+ INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromOther, 1); -+ } -+ -+#endif -+ -+ if (ENDPOINT_0 == pRpt->EndpointID) { -+ /* always give endpoint 0 credits back */ -+ pEndpoint->CreditDist.TxCredits += pRpt->Credits; -+ } else { -+ /* for all other endpoints, update credits to distribute, the distribution function -+ * will handle giving out credits back to the endpoints */ -+ pEndpoint->CreditDist.TxCreditsToDist += pRpt->Credits; -+ /* flag that we have to do the distribution */ -+ doDist = TRUE; -+ } -+ -+ totalCredits += pRpt->Credits; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Report indicated %d credits to distribute \n", totalCredits)); -+ -+ if (doDist) { -+ /* this was a credit return based on a completed send operations -+ * note, this is done with the lock held */ -+ DO_DISTRIBUTION(target, -+ HTC_CREDIT_DIST_SEND_COMPLETE, -+ "Send Complete", -+ target->EpCreditDistributionListHead->pNext); -+ } -+ -+ UNLOCK_HTC_TX(target); -+ -+ if (totalCredits) { -+ HTCCheckEndpointTxQueues(target); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCProcessCreditRpt \n")); -+} -+ -+/* flush endpoint TX queue */ -+static void HTCFlushEndpointTX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint, HTC_TX_TAG Tag) -+{ -+ HTC_PACKET *pPacket; -+ HTC_PACKET_QUEUE discardQueue; -+ -+ /* initialize the discard queue */ -+ INIT_HTC_PACKET_QUEUE(&discardQueue); -+ -+ LOCK_HTC_TX(target); -+ -+ /* interate from the front of the TX queue and flush out packets */ -+ ITERATE_OVER_LIST_ALLOW_REMOVE(&pEndpoint->TxQueue, pPacket, HTC_PACKET, ListLink) { -+ -+ /* check for removal */ -+ if ((HTC_TX_PACKET_TAG_ALL == Tag) || (Tag == pPacket->PktInfo.AsTx.Tag)) { -+ /* remove from queue */ -+ HTC_PACKET_REMOVE(pPacket); -+ /* add it to the discard pile */ -+ HTC_PACKET_ENQUEUE(&discardQueue, pPacket); -+ pEndpoint->CurrentTxQueueDepth--; -+ } -+ -+ } ITERATE_END; -+ -+ UNLOCK_HTC_TX(target); -+ -+ /* empty the discard queue */ -+ while (1) { -+ pPacket = HTC_PACKET_DEQUEUE(&discardQueue); -+ if (NULL == pPacket) { -+ break; -+ } -+ pPacket->Status = A_ECANCELED; -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Flushing TX packet:0x%X, length:%d, ep:%d tag:0x%X \n", -+ (A_UINT32)pPacket, pPacket->ActualLength, pPacket->Endpoint, pPacket->PktInfo.AsTx.Tag)); -+ DO_EP_TX_COMPLETION(pEndpoint,pPacket); -+ } -+ -+} -+ -+void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist) -+{ -+#ifdef DEBUG -+ HTC_ENDPOINT *pEndpoint = (HTC_ENDPOINT *)pEPDist->pHTCReserved; -+#endif -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("--- EP : %d ServiceID: 0x%X --------------\n", -+ pEPDist->Endpoint, pEPDist->ServiceID)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" this:0x%X next:0x%X prev:0x%X\n", -+ (A_UINT32)pEPDist, (A_UINT32)pEPDist->pNext, (A_UINT32)pEPDist->pPrev)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" DistFlags : 0x%X \n", pEPDist->DistFlags)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsNorm : %d \n", pEPDist->TxCreditsNorm)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsMin : %d \n", pEPDist->TxCreditsMin)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCredits : %d \n", pEPDist->TxCredits)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsAssigned : %d \n", pEPDist->TxCreditsAssigned)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsSeek : %d \n", pEPDist->TxCreditsSeek)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditSize : %d \n", pEPDist->TxCreditSize)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsPerMaxMsg : %d \n", pEPDist->TxCreditsPerMaxMsg)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsToDist : %d \n", pEPDist->TxCreditsToDist)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxQueueDepth : %d \n", pEndpoint->CurrentTxQueueDepth)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("----------------------------------------------------\n")); -+} -+ -+void DumpCreditDistStates(HTC_TARGET *target) -+{ -+ HTC_ENDPOINT_CREDIT_DIST *pEPList = target->EpCreditDistributionListHead; -+ -+ while (pEPList != NULL) { -+ DumpCreditDist(pEPList); -+ pEPList = pEPList->pNext; -+ } -+ -+ if (target->DistributeCredits != NULL) { -+ DO_DISTRIBUTION(target, -+ HTC_DUMP_CREDIT_STATE, -+ "Dump State", -+ NULL); -+ } -+} -+ -+/* flush all send packets from all endpoint queues */ -+void HTCFlushSendPkts(HTC_TARGET *target) -+{ -+ HTC_ENDPOINT *pEndpoint; -+ int i; -+ -+ DumpCreditDistStates(target); -+ -+ for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) { -+ pEndpoint = &target->EndPoint[i]; -+ if (pEndpoint->ServiceID == 0) { -+ /* not in use.. */ -+ continue; -+ } -+ HTCFlushEndpointTX(target,pEndpoint,HTC_TX_PACKET_TAG_ALL); -+ } -+ -+ -+} -+ -+/* HTC API to flush an endpoint's TX queue*/ -+void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ HTC_ENDPOINT *pEndpoint = &target->EndPoint[Endpoint]; -+ -+ if (pEndpoint->ServiceID == 0) { -+ AR_DEBUG_ASSERT(FALSE); -+ /* not in use.. */ -+ return; -+ } -+ -+ HTCFlushEndpointTX(target, pEndpoint, Tag); -+} -+ -+/* HTC API to indicate activity to the credit distribution function */ -+void HTCIndicateActivityChange(HTC_HANDLE HTCHandle, -+ HTC_ENDPOINT_ID Endpoint, -+ A_BOOL Active) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ HTC_ENDPOINT *pEndpoint = &target->EndPoint[Endpoint]; -+ A_BOOL doDist = FALSE; -+ -+ if (pEndpoint->ServiceID == 0) { -+ AR_DEBUG_ASSERT(FALSE); -+ /* not in use.. */ -+ return; -+ } -+ -+ LOCK_HTC_TX(target); -+ -+ if (Active) { -+ if (!(pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE)) { -+ /* mark active now */ -+ pEndpoint->CreditDist.DistFlags |= HTC_EP_ACTIVE; -+ doDist = TRUE; -+ } -+ } else { -+ if (pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE) { -+ /* mark inactive now */ -+ pEndpoint->CreditDist.DistFlags &= ~HTC_EP_ACTIVE; -+ doDist = TRUE; -+ } -+ } -+ -+ if (doDist) { -+ /* do distribution again based on activity change -+ * note, this is done with the lock held */ -+ DO_DISTRIBUTION(target, -+ HTC_CREDIT_DIST_ACTIVITY_CHANGE, -+ "Activity Change", -+ target->EpCreditDistributionListHead->pNext); -+ } -+ -+ UNLOCK_HTC_TX(target); -+ -+} -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_services.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/htc/htc_services.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,403 @@ -+/* -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "htc_internal.h" -+ -+void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket) -+{ -+ /* not implemented -+ * we do not send control TX frames during normal runtime, only during setup */ -+ AR_DEBUG_ASSERT(FALSE); -+} -+ -+ /* callback when a control message arrives on this endpoint */ -+void HTCControlRecv(void *Context, HTC_PACKET *pPacket) -+{ -+ AR_DEBUG_ASSERT(pPacket->Endpoint == ENDPOINT_0); -+ -+ /* the only control messages we are expecting are NULL messages (credit resports), which should -+ * never get here */ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ ("HTCControlRecv, got message with length:%d \n", -+ pPacket->ActualLength + HTC_HDR_LENGTH)); -+ -+ /* dump header and message */ -+ DebugDumpBytes(pPacket->pBuffer - HTC_HDR_LENGTH, -+ pPacket->ActualLength + HTC_HDR_LENGTH, -+ "Unexpected ENDPOINT 0 Message"); -+ -+ HTC_RECYCLE_RX_PKT((HTC_TARGET*)Context,pPacket); -+} -+ -+A_STATUS HTCSendSetupComplete(HTC_TARGET *target) -+{ -+ HTC_PACKET *pSendPacket = NULL; -+ A_STATUS status; -+ HTC_SETUP_COMPLETE_MSG *pSetupComplete; -+ -+ do { -+ /* allocate a packet to send to the target */ -+ pSendPacket = HTC_ALLOC_CONTROL_TX(target); -+ -+ if (NULL == pSendPacket) { -+ status = A_NO_MEMORY; -+ break; -+ } -+ -+ /* assemble setup complete message */ -+ pSetupComplete = (HTC_SETUP_COMPLETE_MSG *)pSendPacket->pBuffer; -+ A_MEMZERO(pSetupComplete,sizeof(HTC_SETUP_COMPLETE_MSG)); -+ pSetupComplete->MessageID = HTC_MSG_SETUP_COMPLETE_ID; -+ -+ SET_HTC_PACKET_INFO_TX(pSendPacket, -+ NULL, -+ (A_UINT8 *)pSetupComplete, -+ sizeof(HTC_SETUP_COMPLETE_MSG), -+ ENDPOINT_0, -+ HTC_SERVICE_TX_PACKET_TAG); -+ -+ /* we want synchronous operation */ -+ pSendPacket->Completion = NULL; -+ /* send the message */ -+ status = HTCIssueSend(target,pSendPacket,0); -+ -+ } while (FALSE); -+ -+ if (pSendPacket != NULL) { -+ HTC_FREE_CONTROL_TX(target,pSendPacket); -+ } -+ -+ return status; -+} -+ -+ -+A_STATUS HTCConnectService(HTC_HANDLE HTCHandle, -+ HTC_SERVICE_CONNECT_REQ *pConnectReq, -+ HTC_SERVICE_CONNECT_RESP *pConnectResp) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ A_STATUS status = A_OK; -+ HTC_PACKET *pRecvPacket = NULL; -+ HTC_PACKET *pSendPacket = NULL; -+ HTC_CONNECT_SERVICE_RESPONSE_MSG *pResponseMsg; -+ HTC_CONNECT_SERVICE_MSG *pConnectMsg; -+ HTC_ENDPOINT_ID assignedEndpoint = ENDPOINT_MAX; -+ HTC_ENDPOINT *pEndpoint; -+ int maxMsgSize = 0; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCConnectService, target:0x%X SvcID:0x%X \n", -+ (A_UINT32)target, pConnectReq->ServiceID)); -+ -+ do { -+ -+ AR_DEBUG_ASSERT(pConnectReq->ServiceID != 0); -+ -+ if (HTC_CTRL_RSVD_SVC == pConnectReq->ServiceID) { -+ /* special case for pseudo control service */ -+ assignedEndpoint = ENDPOINT_0; -+ maxMsgSize = HTC_MAX_CONTROL_MESSAGE_LENGTH; -+ } else { -+ /* allocate a packet to send to the target */ -+ pSendPacket = HTC_ALLOC_CONTROL_TX(target); -+ -+ if (NULL == pSendPacket) { -+ AR_DEBUG_ASSERT(FALSE); -+ status = A_NO_MEMORY; -+ break; -+ } -+ /* assemble connect service message */ -+ pConnectMsg = (HTC_CONNECT_SERVICE_MSG *)pSendPacket->pBuffer; -+ AR_DEBUG_ASSERT(pConnectMsg != NULL); -+ A_MEMZERO(pConnectMsg,sizeof(HTC_CONNECT_SERVICE_MSG)); -+ pConnectMsg->MessageID = HTC_MSG_CONNECT_SERVICE_ID; -+ pConnectMsg->ServiceID = pConnectReq->ServiceID; -+ pConnectMsg->ConnectionFlags = pConnectReq->ConnectionFlags; -+ /* check caller if it wants to transfer meta data */ -+ if ((pConnectReq->pMetaData != NULL) && -+ (pConnectReq->MetaDataLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) { -+ /* copy meta data into message buffer (after header ) */ -+ A_MEMCPY((A_UINT8 *)pConnectMsg + sizeof(HTC_CONNECT_SERVICE_MSG), -+ pConnectReq->pMetaData, -+ pConnectReq->MetaDataLength); -+ pConnectMsg->ServiceMetaLength = pConnectReq->MetaDataLength; -+ } -+ -+ SET_HTC_PACKET_INFO_TX(pSendPacket, -+ NULL, -+ (A_UINT8 *)pConnectMsg, -+ sizeof(HTC_CONNECT_SERVICE_MSG) + pConnectMsg->ServiceMetaLength, -+ ENDPOINT_0, -+ HTC_SERVICE_TX_PACKET_TAG); -+ -+ /* we want synchronous operation */ -+ pSendPacket->Completion = NULL; -+ -+ status = HTCIssueSend(target,pSendPacket,0); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* wait for response */ -+ status = HTCWaitforControlMessage(target, &pRecvPacket); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ /* we controlled the buffer creation so it has to be properly aligned */ -+ pResponseMsg = (HTC_CONNECT_SERVICE_RESPONSE_MSG *)pRecvPacket->pBuffer; -+ -+ if ((pResponseMsg->MessageID != HTC_MSG_CONNECT_SERVICE_RESPONSE_ID) || -+ (pRecvPacket->ActualLength < sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG))) { -+ /* this message is not valid */ -+ AR_DEBUG_ASSERT(FALSE); -+ status = A_EPROTO; -+ break; -+ } -+ -+ pConnectResp->ConnectRespCode = pResponseMsg->Status; -+ /* check response status */ -+ if (pResponseMsg->Status != HTC_SERVICE_SUCCESS) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, -+ (" Target failed service 0x%X connect request (status:%d)\n", -+ pResponseMsg->ServiceID, pResponseMsg->Status)); -+ status = A_EPROTO; -+ break; -+ } -+ -+ assignedEndpoint = pResponseMsg->EndpointID; -+ maxMsgSize = pResponseMsg->MaxMsgSize; -+ -+ if ((pConnectResp->pMetaData != NULL) && -+ (pResponseMsg->ServiceMetaLength > 0) && -+ (pResponseMsg->ServiceMetaLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) { -+ /* caller supplied a buffer and the target responded with data */ -+ int copyLength = min((int)pConnectResp->BufferLength, (int)pResponseMsg->ServiceMetaLength); -+ /* copy the meta data */ -+ A_MEMCPY(pConnectResp->pMetaData, -+ ((A_UINT8 *)pResponseMsg) + sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG), -+ copyLength); -+ pConnectResp->ActualLength = copyLength; -+ } -+ -+ } -+ -+ /* the rest of these are parameter checks so set the error status */ -+ status = A_EPROTO; -+ -+ if (assignedEndpoint >= ENDPOINT_MAX) { -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ if (0 == maxMsgSize) { -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ pEndpoint = &target->EndPoint[assignedEndpoint]; -+ -+ if (pEndpoint->ServiceID != 0) { -+ /* endpoint already in use! */ -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ -+ /* return assigned endpoint to caller */ -+ pConnectResp->Endpoint = assignedEndpoint; -+ pConnectResp->MaxMsgLength = maxMsgSize; -+ -+ /* setup the endpoint */ -+ pEndpoint->ServiceID = pConnectReq->ServiceID; /* this marks the endpoint in use */ -+ pEndpoint->MaxTxQueueDepth = pConnectReq->MaxSendQueueDepth; -+ pEndpoint->MaxMsgLength = maxMsgSize; -+ /* copy all the callbacks */ -+ pEndpoint->EpCallBacks = pConnectReq->EpCallbacks; -+ INIT_HTC_PACKET_QUEUE(&pEndpoint->RxBuffers); -+ INIT_HTC_PACKET_QUEUE(&pEndpoint->TxQueue); -+ /* set the credit distribution info for this endpoint, this information is -+ * passed back to the credit distribution callback function */ -+ pEndpoint->CreditDist.ServiceID = pConnectReq->ServiceID; -+ pEndpoint->CreditDist.pHTCReserved = pEndpoint; -+ pEndpoint->CreditDist.Endpoint = assignedEndpoint; -+ pEndpoint->CreditDist.TxCreditSize = target->TargetCreditSize; -+ pEndpoint->CreditDist.TxCreditsPerMaxMsg = maxMsgSize / target->TargetCreditSize; -+ -+ if (0 == pEndpoint->CreditDist.TxCreditsPerMaxMsg) { -+ pEndpoint->CreditDist.TxCreditsPerMaxMsg = 1; -+ } -+ -+ status = A_OK; -+ -+ } while (FALSE); -+ -+ if (pSendPacket != NULL) { -+ HTC_FREE_CONTROL_TX(target,pSendPacket); -+ } -+ -+ if (pRecvPacket != NULL) { -+ HTC_FREE_CONTROL_RX(target,pRecvPacket); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCConnectService \n")); -+ -+ return status; -+} -+ -+static void AddToEndpointDistList(HTC_TARGET *target, HTC_ENDPOINT_CREDIT_DIST *pEpDist) -+{ -+ HTC_ENDPOINT_CREDIT_DIST *pCurEntry,*pLastEntry; -+ -+ if (NULL == target->EpCreditDistributionListHead) { -+ target->EpCreditDistributionListHead = pEpDist; -+ pEpDist->pNext = NULL; -+ pEpDist->pPrev = NULL; -+ return; -+ } -+ -+ /* queue to the end of the list, this does not have to be very -+ * fast since this list is built at startup time */ -+ pCurEntry = target->EpCreditDistributionListHead; -+ -+ while (pCurEntry) { -+ pLastEntry = pCurEntry; -+ pCurEntry = pCurEntry->pNext; -+ } -+ -+ pLastEntry->pNext = pEpDist; -+ pEpDist->pPrev = pLastEntry; -+ pEpDist->pNext = NULL; -+} -+ -+ -+ -+/* default credit init callback */ -+static void HTCDefaultCreditInit(void *Context, -+ HTC_ENDPOINT_CREDIT_DIST *pEPList, -+ int TotalCredits) -+{ -+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; -+ int totalEps = 0; -+ int creditsPerEndpoint; -+ -+ pCurEpDist = pEPList; -+ /* first run through the list and figure out how many endpoints we are dealing with */ -+ while (pCurEpDist != NULL) { -+ pCurEpDist = pCurEpDist->pNext; -+ totalEps++; -+ } -+ -+ /* even distribution */ -+ creditsPerEndpoint = TotalCredits/totalEps; -+ -+ pCurEpDist = pEPList; -+ /* run through the list and set minimum and normal credits and -+ * provide the endpoint with some credits to start */ -+ while (pCurEpDist != NULL) { -+ -+ if (creditsPerEndpoint < pCurEpDist->TxCreditsPerMaxMsg) { -+ /* too many endpoints and not enough credits */ -+ AR_DEBUG_ASSERT(FALSE); -+ break; -+ } -+ /* our minimum is set for at least 1 max message */ -+ pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg; -+ /* this value is ignored by our credit alg, since we do -+ * not dynamically adjust credits, this is the policy of -+ * the "default" credit distribution, something simple and easy */ -+ pCurEpDist->TxCreditsNorm = 0xFFFF; -+ /* give the endpoint minimum credits */ -+ pCurEpDist->TxCredits = creditsPerEndpoint; -+ pCurEpDist->TxCreditsAssigned = creditsPerEndpoint; -+ pCurEpDist = pCurEpDist->pNext; -+ } -+ -+} -+ -+/* default credit distribution callback, NOTE, this callback holds the TX lock */ -+void HTCDefaultCreditDist(void *Context, -+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList, -+ HTC_CREDIT_DIST_REASON Reason) -+{ -+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; -+ -+ if (Reason == HTC_CREDIT_DIST_SEND_COMPLETE) { -+ pCurEpDist = pEPDistList; -+ /* simple distribution */ -+ while (pCurEpDist != NULL) { -+ if (pCurEpDist->TxCreditsToDist > 0) { -+ /* just give the endpoint back the credits */ -+ pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist; -+ pCurEpDist->TxCreditsToDist = 0; -+ } -+ pCurEpDist = pCurEpDist->pNext; -+ } -+ } -+ -+ /* note we do not need to handle the other reason codes as this is a very -+ * simple distribution scheme, no need to seek for more credits or handle inactivity */ -+} -+ -+void HTCSetCreditDistribution(HTC_HANDLE HTCHandle, -+ void *pCreditDistContext, -+ HTC_CREDIT_DIST_CALLBACK CreditDistFunc, -+ HTC_CREDIT_INIT_CALLBACK CreditInitFunc, -+ HTC_SERVICE_ID ServicePriorityOrder[], -+ int ListLength) -+{ -+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); -+ int i; -+ int ep; -+ -+ if (CreditInitFunc != NULL) { -+ /* caller has supplied their own distribution functions */ -+ target->InitCredits = CreditInitFunc; -+ AR_DEBUG_ASSERT(CreditDistFunc != NULL); -+ target->DistributeCredits = CreditDistFunc; -+ target->pCredDistContext = pCreditDistContext; -+ } else { -+ /* caller wants HTC to do distribution */ -+ /* if caller wants service to handle distributions then -+ * it must set both of these to NULL! */ -+ AR_DEBUG_ASSERT(CreditDistFunc == NULL); -+ target->InitCredits = HTCDefaultCreditInit; -+ target->DistributeCredits = HTCDefaultCreditDist; -+ target->pCredDistContext = target; -+ } -+ -+ /* always add HTC control endpoint first, we only expose the list after the -+ * first one, this is added for TX queue checking */ -+ AddToEndpointDistList(target, &target->EndPoint[ENDPOINT_0].CreditDist); -+ -+ /* build the list of credit distribution structures in priority order -+ * supplied by the caller, these will follow endpoint 0 */ -+ for (i = 0; i < ListLength; i++) { -+ /* match services with endpoints and add the endpoints to the distribution list -+ * in FIFO order */ -+ for (ep = ENDPOINT_1; ep < ENDPOINT_MAX; ep++) { -+ if (target->EndPoint[ep].ServiceID == ServicePriorityOrder[i]) { -+ /* queue this one to the list */ -+ AddToEndpointDistList(target, &target->EndPoint[ep].CreditDist); -+ break; -+ } -+ } -+ AR_DEBUG_ASSERT(ep < ENDPOINT_MAX); -+ } -+ -+} -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_config.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_config.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,27 @@ -+#ifndef _A_CONFIG_H_ -+#define _A_CONFIG_H_ -+/* -+ * Copyright (c) 2004-2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+/* -+ * This file contains software configuration options that enables -+ * specific software "features" -+ */ -+#include "../ar6000/config_linux.h" -+ -+#endif -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_debug.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_debug.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,41 @@ -+#ifndef _A_DEBUG_H_ -+#define _A_DEBUG_H_ -+/* -+ * Copyright (c) 2004-2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include -+#include -+ -+#define DBG_INFO 0x00000001 -+#define DBG_ERROR 0x00000002 -+#define DBG_WARNING 0x00000004 -+#define DBG_SDIO 0x00000008 -+#define DBG_HIF 0x00000010 -+#define DBG_HTC 0x00000020 -+#define DBG_WMI 0x00000040 -+#define DBG_WMI2 0x00000080 -+#define DBG_DRIVER 0x00000100 -+ -+#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING) -+ -+#include "../ar6000/debug_linux.h" -+ -+#endif -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_drv_api.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_drv_api.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,185 @@ -+#ifndef _A_DRV_API_H_ -+#define _A_DRV_API_H_ -+/* -+ * Copyright (c) 2004-2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/****************************************************************************/ -+/****************************************************************************/ -+/** **/ -+/** WMI related hooks **/ -+/** **/ -+/****************************************************************************/ -+/****************************************************************************/ -+ -+#include -+ -+#define A_WMI_CHANNELLIST_RX(devt, numChan, chanList) \ -+ ar6000_channelList_rx((devt), (numChan), (chanList)) -+ -+#define A_WMI_SET_NUMDATAENDPTS(devt, num) \ -+ ar6000_set_numdataendpts((devt), (num)) -+ -+#define A_WMI_CONTROL_TX(devt, osbuf, streamID) \ -+ ar6000_control_tx((devt), (osbuf), (streamID)) -+ -+#define A_WMI_TARGETSTATS_EVENT(devt, pStats) \ -+ ar6000_targetStats_event((devt), (pStats)) -+ -+#define A_WMI_SCANCOMPLETE_EVENT(devt, status) \ -+ ar6000_scanComplete_event((devt), (status)) -+ -+#ifdef CONFIG_HOST_DSET_SUPPORT -+ -+#define A_WMI_DSET_DATA_REQ(devt, access_cookie, offset, length, targ_buf, targ_reply_fn, targ_reply_arg) \ -+ ar6000_dset_data_req((devt), (access_cookie), (offset), (length), (targ_buf), (targ_reply_fn), (targ_reply_arg)) -+ -+#define A_WMI_DSET_CLOSE(devt, access_cookie) \ -+ ar6000_dset_close((devt), (access_cookie)) -+ -+#endif -+ -+#define A_WMI_DSET_OPEN_REQ(devt, id, targ_handle, targ_reply_fn, targ_reply_arg) \ -+ ar6000_dset_open_req((devt), (id), (targ_handle), (targ_reply_fn), (targ_reply_arg)) -+ -+#define A_WMI_CONNECT_EVENT(devt, channel, bssid, listenInterval, beaconInterval, networkType, beaconIeLen, assocReqLen, assocRespLen, assocInfo) \ -+ ar6000_connect_event((devt), (channel), (bssid), (listenInterval), (beaconInterval), (networkType), (beaconIeLen), (assocReqLen), (assocRespLen), (assocInfo)) -+ -+#define A_WMI_REGDOMAIN_EVENT(devt, regCode) \ -+ ar6000_regDomain_event((devt), (regCode)) -+ -+#define A_WMI_NEIGHBORREPORT_EVENT(devt, numAps, info) \ -+ ar6000_neighborReport_event((devt), (numAps), (info)) -+ -+#define A_WMI_DISCONNECT_EVENT(devt, reason, bssid, assocRespLen, assocInfo, protocolReasonStatus) \ -+ ar6000_disconnect_event((devt), (reason), (bssid), (assocRespLen), (assocInfo), (protocolReasonStatus)) -+ -+#define A_WMI_TKIP_MICERR_EVENT(devt, keyid, ismcast) \ -+ ar6000_tkip_micerr_event((devt), (keyid), (ismcast)) -+ -+#define A_WMI_BITRATE_RX(devt, rateKbps) \ -+ ar6000_bitrate_rx((devt), (rateKbps)) -+ -+#define A_WMI_TXPWR_RX(devt, txPwr) \ -+ ar6000_txPwr_rx((devt), (txPwr)) -+ -+#define A_WMI_READY_EVENT(devt, datap, phyCap) \ -+ ar6000_ready_event((devt), (datap), (phyCap)) -+ -+#define A_WMI_DBGLOG_INIT_DONE(ar) \ -+ ar6000_dbglog_init_done(ar); -+ -+#define A_WMI_RSSI_THRESHOLD_EVENT(devt, newThreshold, rssi) \ -+ ar6000_rssiThreshold_event((devt), (newThreshold), (rssi)) -+ -+#define A_WMI_REPORT_ERROR_EVENT(devt, errorVal) \ -+ ar6000_reportError_event((devt), (errorVal)) -+ -+#define A_WMI_ROAM_TABLE_EVENT(devt, pTbl) \ -+ ar6000_roam_tbl_event((devt), (pTbl)) -+ -+#define A_WMI_ROAM_DATA_EVENT(devt, p) \ -+ ar6000_roam_data_event((devt), (p)) -+ -+#define A_WMI_WOW_LIST_EVENT(devt, num_filters, wow_filters) \ -+ ar6000_wow_list_event((devt), (num_filters), (wow_filters)) -+ -+#define A_WMI_CAC_EVENT(devt, ac, cac_indication, statusCode, tspecSuggestion) \ -+ ar6000_cac_event((devt), (ac), (cac_indication), (statusCode), (tspecSuggestion)) -+ -+#define A_WMI_IPTOS_TO_USERPRIORITY(pkt) \ -+ ar6000_iptos_to_userPriority((pkt)) -+ -+#define A_WMI_PMKID_LIST_EVENT(devt, num_pmkid, pmkid_list) \ -+ ar6000_pmkid_list_event((devt), (num_pmkid), (pmkid_list)) -+ -+#ifdef CONFIG_HOST_GPIO_SUPPORT -+ -+#define A_WMI_GPIO_INTR_RX(intr_mask, input_values) \ -+ ar6000_gpio_intr_rx((intr_mask), (input_values)) -+ -+#define A_WMI_GPIO_DATA_RX(reg_id, value) \ -+ ar6000_gpio_data_rx((reg_id), (value)) -+ -+#define A_WMI_GPIO_ACK_RX() \ -+ ar6000_gpio_ack_rx() -+ -+#endif -+ -+#ifdef SEND_EVENT_TO_APP -+ -+#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len) \ -+ ar6000_send_event_to_app((ar), (eventId), (datap), (len)) -+ -+#else -+ -+#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len) -+ -+#endif -+ -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+#define A_WMI_TCMD_RX_REPORT_EVENT(devt, results, len) \ -+ ar6000_tcmd_rx_report_event((devt), (results), (len)) -+#endif -+ -+#define A_WMI_HBCHALLENGERESP_EVENT(devt, cookie, source) \ -+ ar6000_hbChallengeResp_event((devt), (cookie), (source)) -+ -+#define A_WMI_TX_RETRY_ERR_EVENT(devt) \ -+ ar6000_tx_retry_err_event((devt)) -+ -+#define A_WMI_SNR_THRESHOLD_EVENT_RX(devt, newThreshold, snr) \ -+ ar6000_snrThresholdEvent_rx((devt), (newThreshold), (snr)) -+ -+#define A_WMI_LQ_THRESHOLD_EVENT_RX(devt, range, lqVal) \ -+ ar6000_lqThresholdEvent_rx((devt), (range), (lqVal)) -+ -+#define A_WMI_RATEMASK_RX(devt, ratemask) \ -+ ar6000_ratemask_rx((devt), (ratemask)) -+ -+#define A_WMI_KEEPALIVE_RX(devt, configured) \ -+ ar6000_keepalive_rx((devt), (configured)) -+ -+#define A_WMI_BSSINFO_EVENT_RX(ar, datp, len) \ -+ ar6000_bssInfo_event_rx((ar), (datap), (len)) -+ -+#define A_WMI_DBGLOG_EVENT(ar, dropped, buffer, length) \ -+ ar6000_dbglog_event((ar), (dropped), (buffer), (length)); -+ -+#define A_WMI_STREAM_TX_ACTIVE(devt,trafficClass) \ -+ ar6000_indicate_tx_activity((devt),(trafficClass), TRUE) -+ -+#define A_WMI_STREAM_TX_INACTIVE(devt,trafficClass) \ -+ ar6000_indicate_tx_activity((devt),(trafficClass), FALSE) -+ -+/****************************************************************************/ -+/****************************************************************************/ -+/** **/ -+/** HTC related hooks **/ -+/** **/ -+/****************************************************************************/ -+/****************************************************************************/ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_drv.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_drv.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,28 @@ -+#ifndef _A_DRV_H_ -+#define _A_DRV_H_ -+/* -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_drv.h#1 $ -+ * -+ * This file contains the definitions of the basic atheros data types. -+ * It is used to map the data types in atheros files to a platform specific -+ * type. -+ * -+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "../ar6000/athdrv_linux.h" -+ -+#endif /* _ADRV_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_osapi.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_osapi.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,28 @@ -+#ifndef _A_OSAPI_H_ -+#define _A_OSAPI_H_ -+/* -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_osapi.h#1 $ -+ * -+ * This file contains the definitions of the basic atheros data types. -+ * It is used to map the data types in atheros files to a platform specific -+ * type. -+ * -+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "../ar6000/osapi_linux.h" -+ -+#endif /* _OSAPI_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ar6000_api.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ar6000_api.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,29 @@ -+#ifndef _AR6000_API_H_ -+#define _AR6000_API_H_ -+/* -+ * Copyright (c) 2004-2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * This file contains the API to access the OS dependent atheros host driver -+ * by the WMI or WLAN generic modules. -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/ar6000_api.h#1 $ -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "../ar6000/ar6xapi_linux.h" -+ -+#endif /* _AR6000_API_H */ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ar6000_diag.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ar6000_diag.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,38 @@ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef AR6000_DIAG_H_ -+#define AR6000_DIAG_H_ -+ -+ -+A_STATUS -+ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); -+ -+A_STATUS -+ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); -+ -+A_STATUS -+ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, -+ A_UCHAR *data, A_UINT32 length); -+ -+A_STATUS -+ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, -+ A_UCHAR *data, A_UINT32 length); -+ -+#endif /*AR6000_DIAG_H_*/ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/AR6001_regdump.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/AR6001_regdump.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,100 @@ -+/* -+ * Copyright (c) 2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+ -+#ifndef __AR6000_REGDUMP_H__ -+#define __AR6000_REGDUMP_H__ -+ -+#if !defined(__ASSEMBLER__) -+/* -+ * Target CPU state at the time of failure is reflected -+ * in a register dump, which the Host can fetch through -+ * the diagnostic window. -+ */ -+ -+struct MIPS_exception_frame_s { -+ A_UINT32 pc; /* Program Counter */ -+ A_UINT32 at; /* MIPS General Purpose registers */ -+ A_UINT32 v0; -+ A_UINT32 v1; -+ A_UINT32 a0; -+ A_UINT32 a1; -+ A_UINT32 a2; -+ A_UINT32 a3; -+ A_UINT32 t0; -+ A_UINT32 t1; -+ A_UINT32 t2; -+ A_UINT32 t3; -+ A_UINT32 t4; -+ A_UINT32 t5; -+ A_UINT32 t6; -+ A_UINT32 t7; -+ A_UINT32 s0; -+ A_UINT32 s1; -+ A_UINT32 s2; -+ A_UINT32 s3; -+ A_UINT32 s4; -+ A_UINT32 s5; -+ A_UINT32 s6; -+ A_UINT32 s7; -+ A_UINT32 t8; -+ A_UINT32 t9; -+ A_UINT32 k0; -+ A_UINT32 k1; -+ A_UINT32 gp; -+ A_UINT32 sp; -+ A_UINT32 s8; -+ A_UINT32 ra; -+ A_UINT32 cause; /* Selected coprocessor regs */ -+ A_UINT32 status; -+}; -+typedef struct MIPS_exception_frame_s CPU_exception_frame_t; -+ -+#endif -+ -+/* -+ * Offsets into MIPS_exception_frame structure, for use in assembler code -+ * MUST MATCH C STRUCTURE ABOVE -+ */ -+#define RD_pc 0 -+#define RD_at 1 -+#define RD_v0 2 -+#define RD_v1 3 -+#define RD_a0 4 -+#define RD_a1 5 -+#define RD_a2 6 -+#define RD_a3 7 -+#define RD_t0 8 -+#define RD_t1 9 -+#define RD_t2 10 -+#define RD_t3 11 -+#define RD_t4 12 -+#define RD_t5 13 -+#define RD_t6 14 -+#define RD_t7 15 -+#define RD_s0 16 -+#define RD_s1 17 -+#define RD_s2 18 -+#define RD_s3 19 -+#define RD_s4 20 -+#define RD_s5 21 -+#define RD_s6 22 -+#define RD_s7 23 -+#define RD_t8 24 -+#define RD_t9 25 -+#define RD_k0 26 -+#define RD_k1 27 -+#define RD_gp 28 -+#define RD_sp 29 -+#define RD_s8 30 -+#define RD_ra 31 -+#define RD_cause 32 -+#define RD_status 33 -+ -+#define RD_SIZE (34*4) /* Space for this number of words */ -+ -+#endif /* __AR6000_REGDUMP_H__ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/AR6Khwreg.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/AR6Khwreg.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,147 @@ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ * This file contains the definitions for AR6001 registers -+ * that may be directly manipulated by Host software. -+ */ -+ -+#ifndef __AR6KHWREG_H__ -+#define __AR6KHWREG_H__ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* Host registers */ -+#define HOST_INT_STATUS_ADDRESS 0x00000400 -+#define CPU_INT_STATUS_ADDRESS 0x00000401 -+#define ERROR_INT_STATUS_ADDRESS 0x00000402 -+#define INT_STATUS_ENABLE_ADDRESS 0x00000418 -+#define CPU_INT_STATUS_ENABLE_ADDRESS 0x00000419 -+#define COUNT_ADDRESS 0x00000420 -+#define COUNT_DEC_ADDRESS 0x00000440 -+#define WINDOW_DATA_ADDRESS 0x00000474 -+#define WINDOW_WRITE_ADDR_ADDRESS 0x00000478 -+#define WINDOW_READ_ADDR_ADDRESS 0x0000047c -+ -+/* Target addresses */ -+#define RESET_CONTROL_ADDRESS 0x0c000000 -+#define MC_REMAP_VALID_ADDRESS 0x0c004080 -+#define MC_REMAP_SIZE_ADDRESS 0x0c004100 -+#define MC_REMAP_COMPARE_ADDRESS 0x0c004180 -+#define MC_REMAP_TARGET_ADDRESS 0x0c004200 -+#define LOCAL_COUNT_ADDRESS 0x0c014080 -+#define LOCAL_SCRATCH_ADDRESS 0x0c0140c0 -+ -+ -+#define INT_STATUS_ENABLE_ERROR_MSB 7 -+#define INT_STATUS_ENABLE_ERROR_LSB 7 -+#define INT_STATUS_ENABLE_ERROR_MASK 0x00000080 -+#define INT_STATUS_ENABLE_ERROR_GET(x) (((x) & INT_STATUS_ENABLE_ERROR_MASK) >> INT_STATUS_ENABLE_ERROR_LSB) -+#define INT_STATUS_ENABLE_ERROR_SET(x) (((x) << INT_STATUS_ENABLE_ERROR_LSB) & INT_STATUS_ENABLE_ERROR_MASK) -+ -+#define INT_STATUS_ENABLE_CPU_MSB 6 -+#define INT_STATUS_ENABLE_CPU_LSB 6 -+#define INT_STATUS_ENABLE_CPU_MASK 0x00000040 -+#define INT_STATUS_ENABLE_CPU_GET(x) (((x) & INT_STATUS_ENABLE_CPU_MASK) >> INT_STATUS_ENABLE_CPU_LSB) -+#define INT_STATUS_ENABLE_CPU_SET(x) (((x) << INT_STATUS_ENABLE_CPU_LSB) & INT_STATUS_ENABLE_CPU_MASK) -+ -+#define INT_STATUS_ENABLE_COUNTER_MSB 4 -+#define INT_STATUS_ENABLE_COUNTER_LSB 4 -+#define INT_STATUS_ENABLE_COUNTER_MASK 0x00000010 -+#define INT_STATUS_ENABLE_COUNTER_GET(x) (((x) & INT_STATUS_ENABLE_COUNTER_MASK) >> INT_STATUS_ENABLE_COUNTER_LSB) -+#define INT_STATUS_ENABLE_COUNTER_SET(x) (((x) << INT_STATUS_ENABLE_COUNTER_LSB) & INT_STATUS_ENABLE_COUNTER_MASK) -+ -+#define INT_STATUS_ENABLE_MBOX_DATA_MSB 3 -+#define INT_STATUS_ENABLE_MBOX_DATA_LSB 0 -+#define INT_STATUS_ENABLE_MBOX_DATA_MASK 0x0000000f -+#define INT_STATUS_ENABLE_MBOX_DATA_GET(x) (((x) & INT_STATUS_ENABLE_MBOX_DATA_MASK) >> INT_STATUS_ENABLE_MBOX_DATA_LSB) -+#define INT_STATUS_ENABLE_MBOX_DATA_SET(x) (((x) << INT_STATUS_ENABLE_MBOX_DATA_LSB) & INT_STATUS_ENABLE_MBOX_DATA_MASK) -+ -+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MSB 1 -+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB 1 -+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK 0x00000002 -+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_GET(x) (((x) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK) >> ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB) -+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(x) (((x) << ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK) -+ -+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MSB 0 -+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB 0 -+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK 0x00000001 -+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_GET(x) (((x) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK) >> ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB) -+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(x) (((x) << ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK) -+ -+ -+#define CPU_INT_STATUS_ENABLE_BIT_MSB 7 -+#define CPU_INT_STATUS_ENABLE_BIT_LSB 0 -+#define CPU_INT_STATUS_ENABLE_BIT_MASK 0x000000ff -+#define CPU_INT_STATUS_ENABLE_BIT_GET(x) (((x) & CPU_INT_STATUS_ENABLE_BIT_MASK) >> CPU_INT_STATUS_ENABLE_BIT_LSB) -+#define CPU_INT_STATUS_ENABLE_BIT_SET(x) (((x) << CPU_INT_STATUS_ENABLE_BIT_LSB) & CPU_INT_STATUS_ENABLE_BIT_MASK) -+ -+#define COUNTER_INT_STATUS_ENABLE_BIT_MSB 7 -+#define COUNTER_INT_STATUS_ENABLE_BIT_LSB 0 -+#define COUNTER_INT_STATUS_ENABLE_BIT_MASK 0x000000ff -+#define COUNTER_INT_STATUS_ENABLE_BIT_GET(x) (((x) & COUNTER_INT_STATUS_ENABLE_BIT_MASK) >> COUNTER_INT_STATUS_ENABLE_BIT_LSB) -+#define COUNTER_INT_STATUS_ENABLE_BIT_SET(x) (((x) << COUNTER_INT_STATUS_ENABLE_BIT_LSB) & COUNTER_INT_STATUS_ENABLE_BIT_MASK) -+ -+#define ERROR_INT_STATUS_WAKEUP_MSB 2 -+#define ERROR_INT_STATUS_WAKEUP_LSB 2 -+#define ERROR_INT_STATUS_WAKEUP_MASK 0x00000004 -+#define ERROR_INT_STATUS_WAKEUP_GET(x) (((x) & ERROR_INT_STATUS_WAKEUP_MASK) >> ERROR_INT_STATUS_WAKEUP_LSB) -+#define ERROR_INT_STATUS_WAKEUP_SET(x) (((x) << ERROR_INT_STATUS_WAKEUP_LSB) & ERROR_INT_STATUS_WAKEUP_MASK) -+ -+#define ERROR_INT_STATUS_RX_UNDERFLOW_MSB 1 -+#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB 1 -+#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK 0x00000002 -+#define ERROR_INT_STATUS_RX_UNDERFLOW_GET(x) (((x) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK) >> ERROR_INT_STATUS_RX_UNDERFLOW_LSB) -+#define ERROR_INT_STATUS_RX_UNDERFLOW_SET(x) (((x) << ERROR_INT_STATUS_RX_UNDERFLOW_LSB) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK) -+ -+#define ERROR_INT_STATUS_TX_OVERFLOW_MSB 0 -+#define ERROR_INT_STATUS_TX_OVERFLOW_LSB 0 -+#define ERROR_INT_STATUS_TX_OVERFLOW_MASK 0x00000001 -+#define ERROR_INT_STATUS_TX_OVERFLOW_GET(x) (((x) & ERROR_INT_STATUS_TX_OVERFLOW_MASK) >> ERROR_INT_STATUS_TX_OVERFLOW_LSB) -+#define ERROR_INT_STATUS_TX_OVERFLOW_SET(x) (((x) << ERROR_INT_STATUS_TX_OVERFLOW_LSB) & ERROR_INT_STATUS_TX_OVERFLOW_MASK) -+ -+#define HOST_INT_STATUS_ERROR_MSB 7 -+#define HOST_INT_STATUS_ERROR_LSB 7 -+#define HOST_INT_STATUS_ERROR_MASK 0x00000080 -+#define HOST_INT_STATUS_ERROR_GET(x) (((x) & HOST_INT_STATUS_ERROR_MASK) >> HOST_INT_STATUS_ERROR_LSB) -+#define HOST_INT_STATUS_ERROR_SET(x) (((x) << HOST_INT_STATUS_ERROR_LSB) & HOST_INT_STATUS_ERROR_MASK) -+ -+#define HOST_INT_STATUS_CPU_MSB 6 -+#define HOST_INT_STATUS_CPU_LSB 6 -+#define HOST_INT_STATUS_CPU_MASK 0x00000040 -+#define HOST_INT_STATUS_CPU_GET(x) (((x) & HOST_INT_STATUS_CPU_MASK) >> HOST_INT_STATUS_CPU_LSB) -+#define HOST_INT_STATUS_CPU_SET(x) (((x) << HOST_INT_STATUS_CPU_LSB) & HOST_INT_STATUS_CPU_MASK) -+ -+#define HOST_INT_STATUS_COUNTER_MSB 4 -+#define HOST_INT_STATUS_COUNTER_LSB 4 -+#define HOST_INT_STATUS_COUNTER_MASK 0x00000010 -+#define HOST_INT_STATUS_COUNTER_GET(x) (((x) & HOST_INT_STATUS_COUNTER_MASK) >> HOST_INT_STATUS_COUNTER_LSB) -+#define HOST_INT_STATUS_COUNTER_SET(x) (((x) << HOST_INT_STATUS_COUNTER_LSB) & HOST_INT_STATUS_COUNTER_MASK) -+ -+#define RESET_CONTROL_WARM_RST_MSB 7 -+#define RESET_CONTROL_WARM_RST_LSB 7 -+#define RESET_CONTROL_WARM_RST_MASK 0x00000080 -+#define RESET_CONTROL_WARM_RST_GET(x) (((x) & RESET_CONTROL_WARM_RST_MASK) >> RESET_CONTROL_WARM_RST_LSB) -+#define RESET_CONTROL_WARM_RST_SET(x) (((x) << RESET_CONTROL_WARM_RST_LSB) & RESET_CONTROL_WARM_RST_MASK) -+ -+#define RESET_CONTROL_COLD_RST_MSB 8 -+#define RESET_CONTROL_COLD_RST_LSB 8 -+#define RESET_CONTROL_COLD_RST_MASK 0x00000100 -+#define RESET_CONTROL_COLD_RST_GET(x) (((x) & RESET_CONTROL_COLD_RST_MASK) >> RESET_CONTROL_COLD_RST_LSB) -+#define RESET_CONTROL_COLD_RST_SET(x) (((x) << RESET_CONTROL_COLD_RST_LSB) & RESET_CONTROL_COLD_RST_MASK) -+ -+#define RESET_CAUSE_LAST_MSB 2 -+#define RESET_CAUSE_LAST_LSB 0 -+#define RESET_CAUSE_LAST_MASK 0x00000007 -+#define RESET_CAUSE_LAST_GET(x) (((x) & RESET_CAUSE_LAST_MASK) >> RESET_CAUSE_LAST_LSB) -+#define RESET_CAUSE_LAST_SET(x) (((x) << RESET_CAUSE_LAST_LSB) & RESET_CAUSE_LAST_MASK) -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* __AR6KHWREG_H__ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/AR6K_version.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/AR6K_version.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,36 @@ -+#define __VER_MAJOR_ 2 -+#define __VER_MINOR_ 0 -+#define __VER_PATCH_ 0 -+ -+ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ * The makear6ksdk script (used for release builds) modifies the following line. -+ */ -+#define __BUILD_NUMBER_ 18 -+ -+ -+/* Format of the version number. */ -+#define VER_MAJOR_BIT_OFFSET 28 -+#define VER_MINOR_BIT_OFFSET 24 -+#define VER_PATCH_BIT_OFFSET 16 -+#define VER_BUILD_NUM_BIT_OFFSET 0 -+ -+ -+/* -+ * The version has the following format: -+ * Bits 28-31: Major version -+ * Bits 24-27: Minor version -+ * Bits 16-23: Patch version -+ * Bits 0-15: Build number (automatically generated during build process ) -+ * E.g. Build 1.1.3.7 would be represented as 0x11030007. -+ * -+ * DO NOT split the following macro into multiple lines as this may confuse the build scripts. -+ */ -+#define AR6K_SW_VERSION ( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) ) -+ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/AR6K_version.h.NEW -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/AR6K_version.h.NEW 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,36 @@ -+#define __VER_MAJOR_ 2 -+#define __VER_MINOR_ 0 -+#define __VER_PATCH_ 0 -+ -+ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ * The makear6ksdk script (used for release builds) modifies the following line. -+ */ -+#define __BUILD_NUMBER_ 18 -+ -+ -+/* Format of the version number. */ -+#define VER_MAJOR_BIT_OFFSET 28 -+#define VER_MINOR_BIT_OFFSET 24 -+#define VER_PATCH_BIT_OFFSET 16 -+#define VER_BUILD_NUM_BIT_OFFSET 0 -+ -+ -+/* -+ * The version has the following format: -+ * Bits 28-31: Major version -+ * Bits 24-27: Minor version -+ * Bits 16-23: Patch version -+ * Bits 0-15: Build number (automatically generated during build process ) -+ * E.g. Build 1.1.3.7 would be represented as 0x11030007. -+ * -+ * DO NOT split the following macro into multiple lines as this may confuse the build scripts. -+ */ -+#define AR6K_SW_VERSION ( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) ) -+ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/athdefs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/athdefs.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,85 @@ -+#ifndef __ATHDEFS_H__ -+#define __ATHDEFS_H__ -+ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ * This file contains definitions that may be used across both -+ * Host and Target software. Nothing here is module-dependent -+ * or platform-dependent. -+ */ -+ -+/* -+ * Generic error codes that can be used by hw, sta, ap, sim, dk -+ * and any other environments. Since these are enums, feel free to -+ * add any more codes that you need. -+ */ -+ -+typedef enum { -+ A_ERROR = -1, /* Generic error return */ -+ A_OK = 0, /* success */ -+ /* Following values start at 1 */ -+ A_DEVICE_NOT_FOUND, /* not able to find PCI device */ -+ A_NO_MEMORY, /* not able to allocate memory, not available */ -+ A_MEMORY_NOT_AVAIL, /* memory region is not free for mapping */ -+ A_NO_FREE_DESC, /* no free descriptors available */ -+ A_BAD_ADDRESS, /* address does not match descriptor */ -+ A_WIN_DRIVER_ERROR, /* used in NT_HW version, if problem at init */ -+ A_REGS_NOT_MAPPED, /* registers not correctly mapped */ -+ A_EPERM, /* Not superuser */ -+ A_EACCES, /* Access denied */ -+ A_ENOENT, /* No such entry, search failed, etc. */ -+ A_EEXIST, /* The object already exists (can't create) */ -+ A_EFAULT, /* Bad address fault */ -+ A_EBUSY, /* Object is busy */ -+ A_EINVAL, /* Invalid parameter */ -+ A_EMSGSIZE, /* Inappropriate message buffer length */ -+ A_ECANCELED, /* Operation canceled */ -+ A_ENOTSUP, /* Operation not supported */ -+ A_ECOMM, /* Communication error on send */ -+ A_EPROTO, /* Protocol error */ -+ A_ENODEV, /* No such device */ -+ A_EDEVNOTUP, /* device is not UP */ -+ A_NO_RESOURCE, /* No resources for requested operation */ -+ A_HARDWARE, /* Hardware failure */ -+ A_PENDING, /* Asynchronous routine; will send up results la -+ter (typically in callback) */ -+ A_EBADCHANNEL, /* The channel cannot be used */ -+ A_DECRYPT_ERROR, /* Decryption error */ -+ A_PHY_ERROR, /* RX PHY error */ -+ A_CONSUMED /* Object was consumed */ -+} A_STATUS; -+ -+#define A_SUCCESS(x) (x == A_OK) -+#define A_FAILED(x) (!A_SUCCESS(x)) -+ -+#ifndef TRUE -+#define TRUE 1 -+#endif -+ -+#ifndef FALSE -+#define FALSE 0 -+#endif -+ -+/* -+ * The following definition is WLAN specific definition -+ */ -+typedef enum { -+ MODE_11A = 0, /* 11a Mode */ -+ MODE_11G = 1, /* 11g + 11b Mode */ -+ MODE_11B = 2, /* 11b Mode */ -+ MODE_11GONLY = 3, /* 11g only Mode */ -+ MODE_UNKNOWN = 4, -+ MODE_MAX = 4 -+} WLAN_PHY_MODE; -+ -+typedef enum { -+ WLAN_11A_CAPABILITY = 1, -+ WLAN_11G_CAPABILITY = 2, -+ WLAN_11AG_CAPABILITY = 3, -+}WLAN_CAPABILITY; -+ -+#endif /* __ATHDEFS_H__ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/athdrv.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/athdrv.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,32 @@ -+/* -+ * Copyright (c) 2004-2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef _ATHDRV_H_ -+#define _ATHDRV_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _ATHDRV_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/athendpack.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/athendpack.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,41 @@ -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ * @file: athendpack.h -+ * -+ * @abstract: end compiler-specific structure packing -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+#ifdef VXWORKS -+#endif /* VXWORKS */ -+ -+#ifdef LINUX -+#endif /* LINUX */ -+ -+#ifdef QNX -+#endif /* QNX */ -+ -+#ifdef INTEGRITY -+#include "integrity/athendpack_integrity.h" -+#endif /* INTEGRITY */ -+ -+#ifdef NUCLEUS -+#endif /* NUCLEUS */ -+ -+#ifdef UNDER_CE -+#include "../os/wince/include/athendpack_wince.h" -+#endif /* WINCE */ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/athstartpack.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/athstartpack.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,42 @@ -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ * @file: athstartpack.h -+ * -+ * @abstract: start compiler-specific structure packing -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifdef VXWORKS -+#endif /* VXWORKS */ -+ -+#ifdef LINUX -+#endif /* LINUX */ -+ -+#ifdef QNX -+#endif /* QNX */ -+ -+#ifdef INTEGRITY -+#include "integrity/athstartpack_integrity.h" -+#endif /* INTEGRITY */ -+ -+#ifdef NUCLEUS -+#endif /* NUCLEUS */ -+ -+#ifdef UNDER_CE -+#include "../os/wince/include/athstartpack_wince.h" -+#endif /* WINCE */ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_types.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/a_types.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,28 @@ -+#ifndef _A_TYPES_H_ -+#define _A_TYPES_H_ -+/* -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_types.h#1 $ -+ * -+ * This file contains the definitions of the basic atheros data types. -+ * It is used to map the data types in atheros files to a platform specific -+ * type. -+ * -+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "../ar6000/athtypes_linux.h" -+ -+#endif /* _ATHTYPES_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/bmi.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/bmi.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,100 @@ -+#ifndef _BMI_H_ -+#define _BMI_H_ -+/* -+ * Copyright (c) 2004-2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ * BMI declarations and prototypes -+ */ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif /* __cplusplus */ -+ -+/* Header files */ -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "hif.h" -+#include "a_osapi.h" -+#include "bmi_msg.h" -+ -+void -+BMIInit(void); -+ -+A_STATUS -+BMIDone(HIF_DEVICE *device); -+ -+A_STATUS -+BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info); -+ -+A_STATUS -+BMIReadMemory(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UCHAR *buffer, -+ A_UINT32 length); -+ -+A_STATUS -+BMIWriteMemory(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UCHAR *buffer, -+ A_UINT32 length); -+ -+A_STATUS -+BMIExecute(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UINT32 *param); -+ -+A_STATUS -+BMISetAppStart(HIF_DEVICE *device, -+ A_UINT32 address); -+ -+A_STATUS -+BMIReadSOCRegister(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UINT32 *param); -+ -+A_STATUS -+BMIWriteSOCRegister(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UINT32 param); -+ -+A_STATUS -+BMIrompatchInstall(HIF_DEVICE *device, -+ A_UINT32 ROM_addr, -+ A_UINT32 RAM_addr, -+ A_UINT32 nbytes, -+ A_UINT32 do_activate, -+ A_UINT32 *patch_id); -+ -+A_STATUS -+BMIrompatchUninstall(HIF_DEVICE *device, -+ A_UINT32 rompatch_id); -+ -+A_STATUS -+BMIrompatchActivate(HIF_DEVICE *device, -+ A_UINT32 rompatch_count, -+ A_UINT32 *rompatch_list); -+ -+A_STATUS -+BMIrompatchDeactivate(HIF_DEVICE *device, -+ A_UINT32 rompatch_count, -+ A_UINT32 *rompatch_list); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _BMI_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/bmi_msg.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/bmi_msg.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,199 @@ -+#ifndef __BMI_MSG_H__ -+#define __BMI_MSG_H__ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+/* -+ * Bootloader Messaging Interface (BMI) -+ * -+ * BMI is a very simple messaging interface used during initialization -+ * to read memory, write memory, execute code, and to define an -+ * application entry PC. -+ * -+ * It is used to download an application to AR6K, to provide -+ * patches to code that is already resident on AR6K, and generally -+ * to examine and modify state. The Host has an opportunity to use -+ * BMI only once during bootup. Once the Host issues a BMI_DONE -+ * command, this opportunity ends. -+ * -+ * The Host writes BMI requests to mailbox0, and reads BMI responses -+ * from mailbox0. BMI requests all begin with a command -+ * (see below for specific commands), and are followed by -+ * command-specific data. -+ * -+ * Flow control: -+ * The Host can only issue a command once the Target gives it a -+ * "BMI Command Credit", using AR6K Counter #4. As soon as the -+ * Target has completed a command, it issues another BMI Command -+ * Credit (so the Host can issue the next command). -+ * -+ * BMI handles all required Target-side cache flushing. -+ */ -+ -+ -+/* Maximum data size used for BMI transfers */ -+#define BMI_DATASZ_MAX 32 -+ -+/* BMI Commands */ -+ -+#define BMI_NO_COMMAND 0 -+ -+#define BMI_DONE 1 -+ /* -+ * Semantics: Host is done using BMI -+ * Request format: -+ * A_UINT32 command (BMI_DONE) -+ * Response format: none -+ */ -+ -+#define BMI_READ_MEMORY 2 -+ /* -+ * Semantics: Host reads AR6K memory -+ * Request format: -+ * A_UINT32 command (BMI_READ_MEMORY) -+ * A_UINT32 address -+ * A_UINT32 length, at most BMI_DATASZ_MAX -+ * Response format: -+ * A_UINT8 data[length] -+ */ -+ -+#define BMI_WRITE_MEMORY 3 -+ /* -+ * Semantics: Host writes AR6K memory -+ * Request format: -+ * A_UINT32 command (BMI_WRITE_MEMORY) -+ * A_UINT32 address -+ * A_UINT32 length, at most BMI_DATASZ_MAX -+ * A_UINT8 data[length] -+ * Response format: none -+ */ -+ -+#define BMI_EXECUTE 4 -+ /* -+ * Semantics: Causes AR6K to execute code -+ * Request format: -+ * A_UINT32 command (BMI_EXECUTE) -+ * A_UINT32 address -+ * A_UINT32 parameter -+ * Response format: -+ * A_UINT32 return value -+ */ -+ -+#define BMI_SET_APP_START 5 -+ /* -+ * Semantics: Set Target application starting address -+ * Request format: -+ * A_UINT32 command (BMI_SET_APP_START) -+ * A_UINT32 address -+ * Response format: none -+ */ -+ -+#define BMI_READ_SOC_REGISTER 6 -+ /* -+ * Semantics: Read a 32-bit Target SOC register. -+ * Request format: -+ * A_UINT32 command (BMI_READ_REGISTER) -+ * A_UINT32 address -+ * Response format: -+ * A_UINT32 value -+ */ -+ -+#define BMI_WRITE_SOC_REGISTER 7 -+ /* -+ * Semantics: Write a 32-bit Target SOC register. -+ * Request format: -+ * A_UINT32 command (BMI_WRITE_REGISTER) -+ * A_UINT32 address -+ * A_UINT32 value -+ * -+ * Response format: none -+ */ -+ -+#define BMI_GET_TARGET_ID 8 -+#define BMI_GET_TARGET_INFO 8 -+ /* -+ * Semantics: Fetch the 4-byte Target information -+ * Request format: -+ * A_UINT32 command (BMI_GET_TARGET_ID/INFO) -+ * Response format1 (old firmware): -+ * A_UINT32 TargetVersionID -+ * Response format2 (newer firmware): -+ * A_UINT32 TARGET_VERSION_SENTINAL -+ * struct bmi_target_info; -+ */ -+ -+struct bmi_target_info { -+ A_UINT32 target_info_byte_count; /* size of this structure */ -+ A_UINT32 target_ver; /* Target Version ID */ -+ A_UINT32 target_type; /* Target type */ -+}; -+#define TARGET_VERSION_SENTINAL 0xffffffff -+#define TARGET_TYPE_AR6001 1 -+#define TARGET_TYPE_AR6002 2 -+ -+ -+#define BMI_ROMPATCH_INSTALL 9 -+ /* -+ * Semantics: Install a ROM Patch. -+ * Request format: -+ * A_UINT32 command (BMI_ROMPATCH_INSTALL) -+ * A_UINT32 Target ROM Address -+ * A_UINT32 Target RAM Address -+ * A_UINT32 Size, in bytes -+ * A_UINT32 Activate? 1-->activate; -+ * 0-->install but do not activate -+ * Response format: -+ * A_UINT32 PatchID -+ */ -+ -+#define BMI_ROMPATCH_UNINSTALL 10 -+ /* -+ * Semantics: Uninstall a previously-installed ROM Patch, -+ * automatically deactivating, if necessary. -+ * Request format: -+ * A_UINT32 command (BMI_ROMPATCH_UNINSTALL) -+ * A_UINT32 PatchID -+ * -+ * Response format: none -+ */ -+ -+#define BMI_ROMPATCH_ACTIVATE 11 -+ /* -+ * Semantics: Activate a list of previously-installed ROM Patches. -+ * Request format: -+ * A_UINT32 command (BMI_ROMPATCH_ACTIVATE) -+ * A_UINT32 rompatch_count -+ * A_UINT32 PatchID[rompatch_count] -+ * -+ * Response format: none -+ */ -+ -+#define BMI_ROMPATCH_DEACTIVATE 12 -+ /* -+ * Semantics: Deactivate a list of active ROM Patches. -+ * Request format: -+ * A_UINT32 command (BMI_ROMPATCH_DEACTIVATE) -+ * A_UINT32 rompatch_count -+ * A_UINT32 PatchID[rompatch_count] -+ * -+ * Response format: none -+ */ -+ -+ -+#endif /* __BMI_MSG_H__ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/common_drv.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/common_drv.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,61 @@ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+ -+#ifndef COMMON_DRV_H_ -+#define COMMON_DRV_H_ -+ -+#include "hif.h" -+#include "htc_packet.h" -+ -+ -+ -+/* structure that is the state information for the default credit distribution callback -+ * drivers should instantiate (zero-init as well) this structure in their driver instance -+ * and pass it as a context to the HTC credit distribution functions */ -+typedef struct _COMMON_CREDIT_STATE_INFO { -+ int TotalAvailableCredits; /* total credits in the system at startup */ -+ int CurrentFreeCredits; /* credits available in the pool that have not been -+ given out to endpoints */ -+ HTC_ENDPOINT_CREDIT_DIST *pLowestPriEpDist; /* pointer to the lowest priority endpoint dist struct */ -+} COMMON_CREDIT_STATE_INFO; -+ -+ -+/* HTC TX packet tagging definitions */ -+#define AR6K_CONTROL_PKT_TAG HTC_TX_PACKET_TAG_USER_DEFINED -+#define AR6K_DATA_PKT_TAG (AR6K_CONTROL_PKT_TAG + 1) -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* OS-independent APIs */ -+A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo); -+A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); -+A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); -+A_STATUS ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, A_UCHAR *data, A_UINT32 length); -+A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType); -+void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType); -+A_STATUS ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /*COMMON_DRV_H_*/ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dbglog_api.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dbglog_api.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,46 @@ -+#ifndef _DBGLOG_API_H_ -+#define _DBGLOG_API_H_ -+/* -+ * Copyright (c) 2004-2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ * This file contains host side debug primitives. -+ */ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#include "dbglog.h" -+ -+#define DBGLOG_HOST_LOG_BUFFER_SIZE DBGLOG_LOG_BUFFER_SIZE -+ -+#define DBGLOG_GET_DBGID(arg) \ -+ ((arg & DBGLOG_DBGID_MASK) >> DBGLOG_DBGID_OFFSET) -+ -+#define DBGLOG_GET_MODULEID(arg) \ -+ ((arg & DBGLOG_MODULEID_MASK) >> DBGLOG_MODULEID_OFFSET) -+ -+#define DBGLOG_GET_NUMARGS(arg) \ -+ ((arg & DBGLOG_NUM_ARGS_MASK) >> DBGLOG_NUM_ARGS_OFFSET) -+ -+#define DBGLOG_GET_TIMESTAMP(arg) \ -+ ((arg & DBGLOG_TIMESTAMP_MASK) >> DBGLOG_TIMESTAMP_OFFSET) -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DBGLOG_API_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dbglog.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dbglog.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,107 @@ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ * This file contains the definitions and data structures associated with -+ * the log based debug mechanism. -+ * -+ */ -+ -+#ifndef _DBGLOG_H_ -+#define _DBGLOG_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#define DBGLOG_TIMESTAMP_OFFSET 0 -+#define DBGLOG_TIMESTAMP_MASK 0x0000FFFF /* Bit 0-15. Contains bit -+ 8-23 of the LF0 timer */ -+#define DBGLOG_DBGID_OFFSET 16 -+#define DBGLOG_DBGID_MASK 0x03FF0000 /* Bit 16-25 */ -+#define DBGLOG_DBGID_NUM_MAX 256 /* Upper limit is width of mask */ -+ -+#define DBGLOG_MODULEID_OFFSET 26 -+#define DBGLOG_MODULEID_MASK 0x3C000000 /* Bit 26-29 */ -+#define DBGLOG_MODULEID_NUM_MAX 16 /* Upper limit is width of mask */ -+ -+/* -+ * Please ensure that the definition of any new module intrduced is captured -+ * between the DBGLOG_MODULEID_START and DBGLOG_MODULEID_END defines. The -+ * structure is required for the parser to correctly pick up the values for -+ * different modules. -+ */ -+#define DBGLOG_MODULEID_START -+#define DBGLOG_MODULEID_INF 0 -+#define DBGLOG_MODULEID_WMI 1 -+#define DBGLOG_MODULEID_CSERV 2 -+#define DBGLOG_MODULEID_PM 3 -+#define DBGLOG_MODULEID_TXRX_MGMTBUF 4 -+#define DBGLOG_MODULEID_TXRX_TXBUF 5 -+#define DBGLOG_MODULEID_TXRX_RXBUF 6 -+#define DBGLOG_MODULEID_WOW 7 -+#define DBGLOG_MODULEID_WHAL 8 -+#define DBGLOG_MODULEID_END -+ -+#define DBGLOG_NUM_ARGS_OFFSET 30 -+#define DBGLOG_NUM_ARGS_MASK 0xC0000000 /* Bit 30-31 */ -+#define DBGLOG_NUM_ARGS_MAX 2 /* Upper limit is width of mask */ -+ -+#define DBGLOG_MODULE_LOG_ENABLE_OFFSET 0 -+#define DBGLOG_MODULE_LOG_ENABLE_MASK 0x0000FFFF -+ -+#define DBGLOG_REPORTING_ENABLED_OFFSET 16 -+#define DBGLOG_REPORTING_ENABLED_MASK 0x00010000 -+ -+#define DBGLOG_TIMESTAMP_RESOLUTION_OFFSET 17 -+#define DBGLOG_TIMESTAMP_RESOLUTION_MASK 0x000E0000 -+ -+#define DBGLOG_REPORT_SIZE_OFFSET 20 -+#define DBGLOG_REPORT_SIZE_MASK 0x3FF00000 -+ -+#define DBGLOG_LOG_BUFFER_SIZE 1500 -+#define DBGLOG_DBGID_DEFINITION_LEN_MAX 64 -+ -+struct dbglog_buf_s { -+ struct dbglog_buf_s *next; -+ A_INT8 *buffer; -+ A_UINT32 bufsize; -+ A_UINT32 length; -+ A_UINT32 count; -+ A_UINT32 free; -+}; -+ -+struct dbglog_hdr_s { -+ struct dbglog_buf_s *dbuf; -+ A_UINT32 dropped; -+}; -+ -+struct dbglog_config_s { -+ A_UINT32 cfgvalid; /* Mask with valid config bits */ -+ union { -+ /* TODO: Take care of endianness */ -+ struct { -+ A_UINT32 mmask:16; /* Mask of modules with logging on */ -+ A_UINT32 rep:1; /* Reporting enabled or not */ -+ A_UINT32 tsr:3; /* Time stamp resolution. Def: 1 ms */ -+ A_UINT32 size:10; /* Report size in number of messages */ -+ A_UINT32 reserved:2; -+ } dbglog_config; -+ -+ A_UINT32 value; -+ } u; -+}; -+ -+#define cfgmmask u.dbglog_config.mmask -+#define cfgrep u.dbglog_config.rep -+#define cfgtsr u.dbglog_config.tsr -+#define cfgsize u.dbglog_config.size -+#define cfgvalue u.value -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DBGLOG_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dbglog_id.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dbglog_id.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,307 @@ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ * This file contains the definitions of the debug identifiers for different -+ * modules. -+ * -+ */ -+ -+#ifndef _DBGLOG_ID_H_ -+#define _DBGLOG_ID_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* -+ * The nomenclature for the debug identifiers is MODULE_DESCRIPTION. -+ * Please ensure that the definition of any new debugid introduced is captured -+ * between the _DBGID_DEFINITION_START and -+ * _DBGID_DEFINITION_END defines. The structure is required for the -+ * parser to correctly pick up the values for different debug identifiers. -+ */ -+ -+/* INF debug identifier definitions */ -+#define INF_DBGID_DEFINITION_START -+#define INF_ASSERTION_FAILED 1 -+#define INF_TARGET_ID 2 -+#define INF_DBGID_DEFINITION_END -+ -+/* WMI debug identifier definitions */ -+#define WMI_DBGID_DEFINITION_START -+#define WMI_CMD_RX_XTND_PKT_TOO_SHORT 1 -+#define WMI_EXTENDED_CMD_NOT_HANDLED 2 -+#define WMI_CMD_RX_PKT_TOO_SHORT 3 -+#define WMI_CALLING_WMI_EXTENSION_FN 4 -+#define WMI_CMD_NOT_HANDLED 5 -+#define WMI_IN_SYNC 6 -+#define WMI_TARGET_WMI_SYNC_CMD 7 -+#define WMI_SET_SNR_THRESHOLD_PARAMS 8 -+#define WMI_SET_RSSI_THRESHOLD_PARAMS 9 -+#define WMI_SET_LQ_TRESHOLD_PARAMS 10 -+#define WMI_TARGET_CREATE_PSTREAM_CMD 11 -+#define WMI_WI_DTM_INUSE 12 -+#define WMI_TARGET_DELETE_PSTREAM_CMD 13 -+#define WMI_TARGET_IMPLICIT_DELETE_PSTREAM_CMD 14 -+#define WMI_TARGET_GET_BIT_RATE_CMD 15 -+#define WMI_GET_RATE_MASK_CMD_FIX_RATE_MASK_IS 16 -+#define WMI_TARGET_GET_AVAILABLE_CHANNELS_CMD 17 -+#define WMI_TARGET_GET_TX_PWR_CMD 18 -+#define WMI_FREE_EVBUF_WMIBUF 19 -+#define WMI_FREE_EVBUF_DATABUF 20 -+#define WMI_FREE_EVBUF_BADFLAG 21 -+#define WMI_HTC_RX_ERROR_DATA_PACKET 22 -+#define WMI_HTC_RX_SYNC_PAUSING_FOR_MBOX 23 -+#define WMI_INCORRECT_WMI_DATA_HDR_DROPPING_PKT 24 -+#define WMI_SENDING_READY_EVENT 25 -+#define WMI_SETPOWER_MDOE_TO_MAXPERF 26 -+#define WMI_SETPOWER_MDOE_TO_REC 27 -+#define WMI_BSSINFO_EVENT_FROM 28 -+#define WMI_TARGET_GET_STATS_CMD 29 -+#define WMI_SENDING_SCAN_COMPLETE_EVENT 30 -+#define WMI_SENDING_RSSI_INDB_THRESHOLD_EVENT 31 -+#define WMI_SENDING_RSSI_INDBM_THRESHOLD_EVENT 32 -+#define WMI_SENDING_LINK_QUALITY_THRESHOLD_EVENT 33 -+#define WMI_SENDING_ERROR_REPORT_EVENT 34 -+#define WMI_SENDING_CAC_EVENT 35 -+#define WMI_TARGET_GET_ROAM_TABLE_CMD 36 -+#define WMI_TARGET_GET_ROAM_DATA_CMD 37 -+#define WMI_SENDING_GPIO_INTR_EVENT 38 -+#define WMI_SENDING_GPIO_ACK_EVENT 39 -+#define WMI_SENDING_GPIO_DATA_EVENT 40 -+#define WMI_CMD_RX 41 -+#define WMI_CMD_RX_XTND 42 -+#define WMI_EVENT_SEND 43 -+#define WMI_EVENT_SEND_XTND 44 -+#define WMI_DBGID_DEFINITION_END -+ -+/* CSERV debug identifier definitions */ -+#define CSERV_DBGID_DEFINITION_START -+#define CSERV_BEGIN_SCAN1 1 -+#define CSERV_BEGIN_SCAN2 2 -+#define CSERV_END_SCAN1 3 -+#define CSERV_END_SCAN2 4 -+#define CSERV_CHAN_SCAN_START 5 -+#define CSERV_CHAN_SCAN_STOP 6 -+#define CSERV_CHANNEL_OPPPORTUNITY 7 -+#define CSERV_NC_TIMEOUT 8 -+#define CSERV_BACK_HOME 10 -+#define CSERV_CHMGR_CH_CALLBACK1 11 -+#define CSERV_CHMGR_CH_CALLBACK2 12 -+#define CSERV_CHMGR_CH_CALLBACK3 13 -+#define CSERV_SET_SCAN_PARAMS1 14 -+#define CSERV_SET_SCAN_PARAMS2 15 -+#define CSERV_SET_SCAN_PARAMS3 16 -+#define CSERV_SET_SCAN_PARAMS4 17 -+#define CSERV_ABORT_SCAN 18 -+#define CSERV_NEWSTATE 19 -+#define CSERV_MINCHMGR_OP_END 20 -+#define CSERV_CHMGR_OP_END 21 -+#define CSERV_DISCONNECT_TIMEOUT 22 -+#define CSERV_ROAM_TIMEOUT 23 -+#define CSERV_FORCE_SCAN1 24 -+#define CSERV_FORCE_SCAN2 25 -+#define CSERV_FORCE_SCAN3 26 -+#define CSERV_UTIL_TIMEOUT 27 -+#define CSERV_RSSIPOLLER 28 -+#define CSERV_RETRY_CONNECT_TIMEOUT 29 -+#define CSERV_RSSIINDBMPOLLER 30 -+#define CSERV_BGSCAN_ENABLE 31 -+#define CSERV_BGSCAN_DISABLE 32 -+#define CSERV_WLAN_START_SCAN_CMD1 33 -+#define CSERV_WLAN_START_SCAN_CMD2 34 -+#define CSERV_WLAN_START_SCAN_CMD3 35 -+#define CSERV_START_SCAN_CMD 36 -+#define CSERV_START_FORCE_SCAN 37 -+#define CSERV_NEXT_CHAN 38 -+#define CSERV_SET_REGCODE 39 -+#define CSERV_START_ADHOC 40 -+#define CSERV_ADHOC_AT_HOME 41 -+#define CSERV_OPT_AT_HOME 42 -+#define CSERV_WLAN_CONNECT_CMD 43 -+#define CSERV_WLAN_RECONNECT_CMD 44 -+#define CSERV_WLAN_DISCONNECT_CMD 45 -+#define CSERV_BSS_CHANGE_CHANNEL 46 -+#define CSERV_BEACON_RX 47 -+#define CSERV_KEEPALIVE_CHECK 48 -+#define CSERV_RC_BEGIN_SCAN 49 -+#define CSERV_RC_SCAN_START 50 -+#define CSERV_RC_SCAN_STOP 51 -+#define CSERV_RC_NEXT 52 -+#define CSERV_RC_SCAN_END 53 -+#define CSERV_PROBE_CALLBACK 54 -+#define CSERV_ROAM1 55 -+#define CSERV_ROAM2 56 -+#define CSERV_ROAM3 57 -+#define CSERV_CONNECT_EVENT 58 -+#define CSERV_DISCONNECT_EVENT 59 -+#define CSERV_BMISS_HANDLER1 60 -+#define CSERV_BMISS_HANDLER2 61 -+#define CSERV_BMISS_HANDLER3 62 -+#define CSERV_LOWRSSI_HANDLER 63 -+#define CSERV_WLAN_SET_PMKID_CMD 64 -+#define CSERV_RECONNECT_REQUEST 65 -+#define CSERV_KEYSPLUMBED_EVENT 66 -+#define CSERV_NEW_REG 67 -+#define CSERV_SET_RSSI_THOLD 68 -+#define CSERV_RSSITHRESHOLDCHECK 69 -+#define CSERV_RSSIINDBMTHRESHOLDCHECK 70 -+#define CSERV_WLAN_SET_OPT_CMD1 71 -+#define CSERV_WLAN_SET_OPT_CMD2 72 -+#define CSERV_WLAN_SET_OPT_CMD3 73 -+#define CSERV_WLAN_SET_OPT_CMD4 74 -+#define CSERV_SCAN_CONNECT_STOP 75 -+#define CSERV_BMISS_HANDLER4 76 -+#define CSERV_INITIALIZE_TIMER 77 -+#define CSERV_ARM_TIMER 78 -+#define CSERV_DISARM_TIMER 79 -+#define CSERV_UNINITIALIZE_TIMER 80 -+#define CSERV_DISCONNECT_EVENT2 81 -+#define CSERV_SCAN_CONNECT_START 82 -+#define CSERV_BSSINFO_MEMORY_ALLOC_FAILED 83 -+#define CSERV_SET_SCAN_PARAMS5 84 -+#define CSERV_DBGID_DEFINITION_END -+ -+/* TXRX debug identifier definitions */ -+#define TXRX_TXBUF_DBGID_DEFINITION_START -+#define TXRX_TXBUF_ALLOCATE_BUF 1 -+#define TXRX_TXBUF_QUEUE_BUF_TO_MBOX 2 -+#define TXRX_TXBUF_QUEUE_BUF_TO_TXQ 3 -+#define TXRX_TXBUF_TXQ_DEPTH 4 -+#define TXRX_TXBUF_IBSS_QUEUE_TO_SFQ 5 -+#define TXRX_TXBUF_IBSS_QUEUE_TO_TXQ_FRM_SFQ 6 -+#define TXRX_TXBUF_INITIALIZE_TIMER 7 -+#define TXRX_TXBUF_ARM_TIMER 8 -+#define TXRX_TXBUF_DISARM_TIMER 9 -+#define TXRX_TXBUF_UNINITIALIZE_TIMER 10 -+#define TXRX_TXBUF_DBGID_DEFINITION_END -+ -+#define TXRX_RXBUF_DBGID_DEFINITION_START -+#define TXRX_RXBUF_ALLOCATE_BUF 1 -+#define TXRX_RXBUF_QUEUE_TO_HOST 2 -+#define TXRX_RXBUF_QUEUE_TO_WLAN 3 -+#define TXRX_RXBUF_ZERO_LEN_BUF 4 -+#define TXRX_RXBUF_QUEUE_TO_HOST_LASTBUF_IN_RXCHAIN 5 -+#define TXRX_RXBUF_LASTBUF_IN_RXCHAIN_ZEROBUF 6 -+#define TXRX_RXBUF_QUEUE_EMPTY_QUEUE_TO_WLAN 7 -+#define TXRX_RXBUF_SEND_TO_RECV_MGMT 8 -+#define TXRX_RXBUF_SEND_TO_IEEE_LAYER 9 -+#define TXRX_RXBUF_DBGID_DEFINITION_END -+ -+#define TXRX_MGMTBUF_DBGID_DEFINITION_START -+#define TXRX_MGMTBUF_ALLOCATE_BUF 1 -+#define TXRX_MGMTBUF_ALLOCATE_SM_BUF 2 -+#define TXRX_MGMTBUF_ALLOCATE_RMBUF 3 -+#define TXRX_MGMTBUF_GET_BUF 4 -+#define TXRX_MGMTBUF_GET_SM_BUF 5 -+#define TXRX_MGMTBUF_QUEUE_BUF_TO_TXQ 6 -+#define TXRX_MGMTBUF_REAPED_BUF 7 -+#define TXRX_MGMTBUF_REAPED_SM_BUF 8 -+#define TXRX_MGMTBUF_WAIT_FOR_TXQ_DRAIN 9 -+#define TXRX_MGMTBUF_WAIT_FOR_TXQ_SFQ_DRAIN 10 -+#define TXRX_MGMTBUF_ENQUEUE_INTO_SFQ 11 -+#define TXRX_MGMTBUF_DEQUEUE_FROM_SFQ 12 -+#define TXRX_MGMTBUF_PAUSE_TXQ 13 -+#define TXRX_MGMTBUF_RESUME_TXQ 14 -+#define TXRX_MGMTBUF_WAIT_FORTXQ_DRAIN_TIMEOUT 15 -+#define TXRX_MGMTBUF_DRAINQ 16 -+#define TXRX_MGMTBUF_INDICATE_Q_DRAINED 17 -+#define TXRX_MGMTBUF_DBGID_DEFINITION_END -+ -+/* PM (Power Module) debug identifier definitions */ -+#define PM_DBGID_DEFINITION_START -+#define PM_INIT 1 -+#define PM_ENABLE 2 -+#define PM_SET_STATE 3 -+#define PM_SET_POWERMODE 4 -+#define PM_CONN_NOTIFY 5 -+#define PM_REF_COUNT_NEGATIVE 6 -+#define PM_APSD_ENABLE 7 -+#define PM_UPDATE_APSD_STATE 8 -+#define PM_CHAN_OP_REQ 9 -+#define PM_SET_MY_BEACON_POLICY 10 -+#define PM_SET_ALL_BEACON_POLICY 11 -+#define PM_SET_PM_PARAMS1 12 -+#define PM_SET_PM_PARAMS2 13 -+#define PM_ADHOC_SET_PM_CAPS_FAIL 14 -+#define PM_ADHOC_UNKNOWN_IBSS_ATTRIB_ID 15 -+#define PM_DBGID_DEFINITION_END -+ -+/* Wake on Wireless debug identifier definitions */ -+#define WOW_DBGID_DEFINITION_START -+#define WOW_INIT 1 -+#define WOW_GET_CONFIG_DSET 2 -+#define WOW_NO_CONFIG_DSET 3 -+#define WOW_INVALID_CONFIG_DSET 4 -+#define WOW_USE_DEFAULT_CONFIG 5 -+#define WOW_SETUP_GPIO 6 -+#define WOW_INIT_DONE 7 -+#define WOW_SET_GPIO_PIN 8 -+#define WOW_CLEAR_GPIO_PIN 9 -+#define WOW_SET_WOW_MODE_CMD 10 -+#define WOW_SET_HOST_MODE_CMD 11 -+#define WOW_ADD_WOW_PATTERN_CMD 12 -+#define WOW_NEW_WOW_PATTERN_AT_INDEX 13 -+#define WOW_DEL_WOW_PATTERN_CMD 14 -+#define WOW_LIST_CONTAINS_PATTERNS 15 -+#define WOW_GET_WOW_LIST_CMD 16 -+#define WOW_INVALID_FILTER_ID 17 -+#define WOW_INVALID_FILTER_LISTID 18 -+#define WOW_NO_VALID_FILTER_AT_ID 19 -+#define WOW_NO_VALID_LIST_AT_ID 20 -+#define WOW_NUM_PATTERNS_EXCEEDED 21 -+#define WOW_NUM_LISTS_EXCEEDED 22 -+#define WOW_GET_WOW_STATS 23 -+#define WOW_CLEAR_WOW_STATS 24 -+#define WOW_WAKEUP_HOST 25 -+#define WOW_EVENT_WAKEUP_HOST 26 -+#define WOW_EVENT_DISCARD 27 -+#define WOW_PATTERN_MATCH 28 -+#define WOW_PATTERN_NOT_MATCH 29 -+#define WOW_PATTERN_NOT_MATCH_OFFSET 30 -+#define WOW_DISABLED_HOST_ASLEEP 31 -+#define WOW_ENABLED_HOST_ASLEEP_NO_PATTERNS 32 -+#define WOW_ENABLED_HOST_ASLEEP_NO_MATCH_FOUND 33 -+#define WOW_DBGID_DEFINITION_END -+ -+/* WHAL debug identifier definitions */ -+#define WHAL_DBGID_DEFINITION_START -+#define WHAL_ERROR_ANI_CONTROL 1 -+#define WHAL_ERROR_CHIP_TEST1 2 -+#define WHAL_ERROR_CHIP_TEST2 3 -+#define WHAL_ERROR_EEPROM_CHECKSUM 4 -+#define WHAL_ERROR_EEPROM_MACADDR 5 -+#define WHAL_ERROR_INTERRUPT_HIU 6 -+#define WHAL_ERROR_KEYCACHE_RESET 7 -+#define WHAL_ERROR_KEYCACHE_SET 8 -+#define WHAL_ERROR_KEYCACHE_TYPE 9 -+#define WHAL_ERROR_KEYCACHE_TKIPENTRY 10 -+#define WHAL_ERROR_KEYCACHE_WEPLENGTH 11 -+#define WHAL_ERROR_PHY_INVALID_CHANNEL 12 -+#define WHAL_ERROR_POWER_AWAKE 13 -+#define WHAL_ERROR_POWER_SET 14 -+#define WHAL_ERROR_RECV_STOPDMA 15 -+#define WHAL_ERROR_RECV_STOPPCU 16 -+#define WHAL_ERROR_RESET_CHANNF1 17 -+#define WHAL_ERROR_RESET_CHANNF2 18 -+#define WHAL_ERROR_RESET_PM 19 -+#define WHAL_ERROR_RESET_OFFSETCAL 20 -+#define WHAL_ERROR_RESET_RFGRANT 21 -+#define WHAL_ERROR_RESET_RXFRAME 22 -+#define WHAL_ERROR_RESET_STOPDMA 23 -+#define WHAL_ERROR_RESET_RECOVER 24 -+#define WHAL_ERROR_XMIT_COMPUTE 25 -+#define WHAL_ERROR_XMIT_NOQUEUE 26 -+#define WHAL_ERROR_XMIT_ACTIVEQUEUE 27 -+#define WHAL_ERROR_XMIT_BADTYPE 28 -+#define WHAL_DBGID_DEFINITION_END -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DBGLOG_ID_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dl_list.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dl_list.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,114 @@ -+/* -+ * -+ * Double-link list definitions (adapted from Atheros SDIO stack) -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+#ifndef __DL_LIST_H___ -+#define __DL_LIST_H___ -+ -+#define A_CONTAINING_STRUCT(address, struct_type, field_name)\ -+ ((struct_type *)((A_UINT32)(address) - (A_UINT32)(&((struct_type *)0)->field_name))) -+ -+/* list functions */ -+/* pointers for the list */ -+typedef struct _DL_LIST { -+ struct _DL_LIST *pPrev; -+ struct _DL_LIST *pNext; -+}DL_LIST, *PDL_LIST; -+/* -+ * DL_LIST_INIT , initialize doubly linked list -+*/ -+#define DL_LIST_INIT(pList)\ -+ {(pList)->pPrev = pList; (pList)->pNext = pList;} -+ -+#define DL_LIST_IS_EMPTY(pList) (((pList)->pPrev == (pList)) && ((pList)->pNext == (pList))) -+#define DL_LIST_GET_ITEM_AT_HEAD(pList) (pList)->pNext -+#define DL_LIST_GET_ITEM_AT_TAIL(pList) (pList)->pPrev -+/* -+ * ITERATE_OVER_LIST pStart is the list, pTemp is a temp list member -+ * NOT: do not use this function if the items in the list are deleted inside the -+ * iteration loop -+*/ -+#define ITERATE_OVER_LIST(pStart, pTemp) \ -+ for((pTemp) =(pStart)->pNext; pTemp != (pStart); (pTemp) = (pTemp)->pNext) -+ -+ -+/* safe iterate macro that allows the item to be removed from the list -+ * the iteration continues to the next item in the list -+ */ -+#define ITERATE_OVER_LIST_ALLOW_REMOVE(pStart,pItem,st,offset) \ -+{ \ -+ PDL_LIST pTemp; \ -+ pTemp = (pStart)->pNext; \ -+ while (pTemp != (pStart)) { \ -+ (pItem) = A_CONTAINING_STRUCT(pTemp,st,offset); \ -+ pTemp = pTemp->pNext; \ -+ -+#define ITERATE_END }} -+ -+/* -+ * DL_ListInsertTail - insert pAdd to the end of the list -+*/ -+static INLINE PDL_LIST DL_ListInsertTail(PDL_LIST pList, PDL_LIST pAdd) { -+ /* insert at tail */ -+ pAdd->pPrev = pList->pPrev; -+ pAdd->pNext = pList; -+ pList->pPrev->pNext = pAdd; -+ pList->pPrev = pAdd; -+ return pAdd; -+} -+ -+/* -+ * DL_ListInsertHead - insert pAdd into the head of the list -+*/ -+static INLINE PDL_LIST DL_ListInsertHead(PDL_LIST pList, PDL_LIST pAdd) { -+ /* insert at head */ -+ pAdd->pPrev = pList; -+ pAdd->pNext = pList->pNext; -+ pList->pNext->pPrev = pAdd; -+ pList->pNext = pAdd; -+ return pAdd; -+} -+ -+#define DL_ListAdd(pList,pItem) DL_ListInsertHead((pList),(pItem)) -+/* -+ * DL_ListRemove - remove pDel from list -+*/ -+static INLINE PDL_LIST DL_ListRemove(PDL_LIST pDel) { -+ pDel->pNext->pPrev = pDel->pPrev; -+ pDel->pPrev->pNext = pDel->pNext; -+ /* point back to itself just to be safe, incase remove is called again */ -+ pDel->pNext = pDel; -+ pDel->pPrev = pDel; -+ return pDel; -+} -+ -+/* -+ * DL_ListRemoveItemFromHead - get a list item from the head -+*/ -+static INLINE PDL_LIST DL_ListRemoveItemFromHead(PDL_LIST pList) { -+ PDL_LIST pItem = NULL; -+ if (pList->pNext != pList) { -+ pItem = pList->pNext; -+ /* remove the first item from head */ -+ DL_ListRemove(pItem); -+ } -+ return pItem; -+} -+ -+#endif /* __DL_LIST_H___ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dset_api.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dset_api.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,63 @@ -+/* -+ * Copyright (c) 2004-2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/dset_api.h#1 $ -+ * -+ * Host-side DataSet API. -+ * -+ */ -+ -+#ifndef _DSET_API_H_ -+#define _DSET_API_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif /* __cplusplus */ -+ -+/* -+ * Host-side DataSet support is optional, and is not -+ * currently required for correct operation. To disable -+ * Host-side DataSet support, set this to 0. -+ */ -+#ifndef CONFIG_HOST_DSET_SUPPORT -+#define CONFIG_HOST_DSET_SUPPORT 1 -+#endif -+ -+/* Called to send a DataSet Open Reply back to the Target. */ -+A_STATUS wmi_dset_open_reply(struct wmi_t *wmip, -+ A_UINT32 status, -+ A_UINT32 access_cookie, -+ A_UINT32 size, -+ A_UINT32 version, -+ A_UINT32 targ_handle, -+ A_UINT32 targ_reply_fn, -+ A_UINT32 targ_reply_arg); -+ -+/* Called to send a DataSet Data Reply back to the Target. */ -+A_STATUS wmi_dset_data_reply(struct wmi_t *wmip, -+ A_UINT32 status, -+ A_UINT8 *host_buf, -+ A_UINT32 length, -+ A_UINT32 targ_buf, -+ A_UINT32 targ_reply_fn, -+ A_UINT32 targ_reply_arg); -+ -+#ifdef __cplusplus -+} -+#endif /* __cplusplus */ -+ -+ -+#endif /* _DSET_API_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dsetid.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dsetid.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,110 @@ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+ -+#ifndef __DSETID_H__ -+#define __DSETID_H__ -+ -+/* Well-known DataSet IDs */ -+#define DSETID_UNUSED 0x00000000 -+#define DSETID_BOARD_DATA 0x00000001 /* Cal and board data */ -+#define DSETID_REGDB 0x00000002 /* Regulatory Database */ -+#define DSETID_POWER_CONTROL 0x00000003 /* TX Pwr Lim & Ant Gain */ -+#define DSETID_USER_CONFIG 0x00000004 /* User Configuration */ -+ -+#define DSETID_ANALOG_CONTROL_DATA_START 0x00000005 -+#define DSETID_ANALOG_CONTROL_DATA_END 0x00000025 -+/* -+ * Get DSETID for various reference clock speeds. -+ * For each speed there are three DataSets that correspond -+ * to the three columns of bank6 data (addr, 11a, 11b/g). -+ * This macro returns the dsetid of the first of those -+ * three DataSets. -+ */ -+#define ANALOG_CONTROL_DATA_DSETID(refclk) \ -+ (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk) -+ -+/* -+ * There are TWO STARTUP_PATCH DataSets. -+ * DSETID_STARTUP_PATCH is historical, and was applied before BMI on -+ * earlier systems. On AR6002, it is applied after BMI, just like -+ * DSETID_STARTUP_PATCH2. -+ */ -+#define DSETID_STARTUP_PATCH 0x00000026 -+#define DSETID_GPIO_CONFIG_PATCH 0x00000027 -+#define DSETID_WLANREGS 0x00000028 /* override wlan regs */ -+#define DSETID_STARTUP_PATCH2 0x00000029 -+ -+#define DSETID_WOW_CONFIG 0x00000090 /* WoW Configuration */ -+ -+/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */ -+#define DSETID_INI_DATA 0x00000100 -+/* Reserved for WHAL INI Tables: 0x100..0x11f */ -+#define DSETID_INI_DATA_END 0x0000011f -+ -+#define DSETID_VENDOR_START 0x00010000 /* Vendor-defined DataSets */ -+ -+#define DSETID_INDEX_END 0xfffffffe /* Reserved to indicate the -+ end of a memory-based -+ DataSet Index */ -+#define DSETID_INDEX_FREE 0xffffffff /* An unused index entry */ -+ -+/* -+ * PATCH DataSet format: -+ * A list of patches, terminated by a patch with -+ * address=PATCH_END. -+ * -+ * This allows for patches to be stored in flash. -+ */ -+struct patch_s { -+ A_UINT32 *address; -+ A_UINT32 data; -+}; -+ -+/* -+ * Skip some patches. Can be used to erase a single patch in a -+ * patch DataSet without having to re-write the DataSet. May -+ * also be used to embed information for use by subsequent -+ * patch code. The "data" in a PATCH_SKIP tells how many -+ * bytes of length "patch_s" to skip. -+ */ -+#define PATCH_SKIP ((A_UINT32 *)0x00000000) -+ -+/* -+ * Execute code at the address specified by "data". -+ * The address of the patch structure is passed as -+ * the one parameter. -+ */ -+#define PATCH_CODE_ABS ((A_UINT32 *)0x00000001) -+ -+/* -+ * Same as PATCH_CODE_ABS, but treat "data" as an -+ * offset from the start of the patch word. -+ */ -+#define PATCH_CODE_REL ((A_UINT32 *)0x00000002) -+ -+/* Mark the end of this patch DataSet. */ -+#define PATCH_END ((A_UINT32 *)0xffffffff) -+ -+/* -+ * A DataSet which contains a Binary Patch to some other DataSet -+ * uses the original dsetid with the DSETID_BPATCH_FLAG bit set. -+ * Such a BPatch DataSet consists of BPatch metadata followed by -+ * the bdiff bytes. BPatch metadata consists of a single 32-bit -+ * word that contains the size of the BPatched final image. -+ * -+ * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff -+ * to create "diffs": -+ * bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs -+ * Then add BPatch metadata to the start of "diffs". -+ * -+ * NB: There are some implementation-induced restrictions -+ * on which DataSets can be BPatched. -+ */ -+#define DSETID_BPATCH_FLAG 0x80000000 -+ -+#endif /* __DSETID_H__ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dset_internal.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/dset_internal.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,39 @@ -+/* -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+ -+#ifndef __DSET_INTERNAL_H__ -+#define __DSET_INTERNAL_H__ -+ -+/* -+ * Internal dset definitions, common for DataSet layer. -+ */ -+ -+#define DSET_TYPE_STANDARD 0 -+#define DSET_TYPE_BPATCHED 1 -+#define DSET_TYPE_COMPRESSED 2 -+ -+/* Dataset descriptor */ -+ -+typedef struct dset_descriptor_s { -+ struct dset_descriptor_s *next; /* List link. NULL only at the last -+ descriptor */ -+ A_UINT16 id; /* Dset ID */ -+ A_UINT16 size; /* Dset size. */ -+ void *DataPtr; /* Pointer to raw data for standard -+ DataSet or pointer to original -+ dset_descriptor for patched -+ DataSet */ -+ A_UINT32 data_type; /* DSET_TYPE_*, above */ -+ -+ void *AuxPtr; /* Additional data that might -+ needed for data_type. For -+ example, pointer to patch -+ Dataset descriptor for BPatch. */ -+} dset_descriptor_t; -+ -+#endif /* __DSET_INTERNAL_H__ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/gpio_api.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/gpio_api.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,57 @@ -+#ifndef _GPIO_API_H_ -+#define _GPIO_API_H_ -+/* -+ * Copyright 2005 Atheros Communications, Inc., All Rights Reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+/* -+ * Host-side General Purpose I/O API. -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/gpio_api.h#1 $ -+ */ -+ -+/* -+ * Send a command to the Target in order to change output on GPIO pins. -+ */ -+A_STATUS wmi_gpio_output_set(struct wmi_t *wmip, -+ A_UINT32 set_mask, -+ A_UINT32 clear_mask, -+ A_UINT32 enable_mask, -+ A_UINT32 disable_mask); -+ -+/* -+ * Send a command to the Target requesting input state of GPIO pins. -+ */ -+A_STATUS wmi_gpio_input_get(struct wmi_t *wmip); -+ -+/* -+ * Send a command to the Target to change the value of a GPIO register. -+ */ -+A_STATUS wmi_gpio_register_set(struct wmi_t *wmip, -+ A_UINT32 gpioreg_id, -+ A_UINT32 value); -+ -+/* -+ * Send a command to the Target to fetch the value of a GPIO register. -+ */ -+A_STATUS wmi_gpio_register_get(struct wmi_t *wmip, A_UINT32 gpioreg_id); -+ -+/* -+ * Send a command to the Target, acknowledging some GPIO interrupts. -+ */ -+A_STATUS wmi_gpio_intr_ack(struct wmi_t *wmip, A_UINT32 ack_mask); -+ -+#endif /* _GPIO_API_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/gpio.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/gpio.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,34 @@ -+/* -+ * Copyright (c) 2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+ -+#if defined(AR6001) -+#define GPIO_PIN_COUNT 18 -+#else -+#define GPIO_PIN_COUNT 18 -+#endif -+ -+/* -+ * Possible values for WMIX_GPIO_SET_REGISTER_CMDID. -+ * NB: These match hardware order, so that addresses can -+ * easily be computed. -+ */ -+#define GPIO_ID_OUT 0x00000000 -+#define GPIO_ID_OUT_W1TS 0x00000001 -+#define GPIO_ID_OUT_W1TC 0x00000002 -+#define GPIO_ID_ENABLE 0x00000003 -+#define GPIO_ID_ENABLE_W1TS 0x00000004 -+#define GPIO_ID_ENABLE_W1TC 0x00000005 -+#define GPIO_ID_IN 0x00000006 -+#define GPIO_ID_STATUS 0x00000007 -+#define GPIO_ID_STATUS_W1TS 0x00000008 -+#define GPIO_ID_STATUS_W1TC 0x00000009 -+#define GPIO_ID_PIN0 0x0000000a -+#define GPIO_ID_PIN(n) (GPIO_ID_PIN0+(n)) -+ -+#define GPIO_LAST_REGISTER_ID GPIO_ID_PIN(17) -+#define GPIO_ID_NONE 0xffffffff -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/hif.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/hif.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,296 @@ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ * HIF specific declarations and prototypes -+ */ -+ -+#ifndef _HIF_H_ -+#define _HIF_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif /* __cplusplus */ -+ -+/* Header files */ -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "a_osapi.h" -+ -+typedef struct htc_callbacks HTC_CALLBACKS; -+typedef struct hif_device HIF_DEVICE; -+ -+/* -+ * direction - Direction of transfer (HIF_READ/HIF_WRITE). -+ */ -+#define HIF_READ 0x00000001 -+#define HIF_WRITE 0x00000002 -+#define HIF_DIR_MASK (HIF_READ | HIF_WRITE) -+ -+/* -+ * type - An interface may support different kind of read/write commands. -+ * The command type is divided into a basic and an extended command -+ * and can be specified using HIF_BASIC_IO/HIF_EXTENDED_IO. -+ */ -+#define HIF_BASIC_IO 0x00000004 -+#define HIF_EXTENDED_IO 0x00000008 -+#define HIF_TYPE_MASK (HIF_BASIC_IO | HIF_EXTENDED_IO) -+ -+/* -+ * emode - This indicates the whether the command is to be executed in a -+ * blocking or non-blocking fashion (HIF_SYNCHRONOUS/ -+ * HIF_ASYNCHRONOUS). The read/write data paths in HTC have been -+ * implemented using the asynchronous mode allowing the the bus -+ * driver to indicate the completion of operation through the -+ * registered callback routine. The requirement primarily comes -+ * from the contexts these operations get called from (a driver's -+ * transmit context or the ISR context in case of receive). -+ * Support for both of these modes is essential. -+ */ -+#define HIF_SYNCHRONOUS 0x00000010 -+#define HIF_ASYNCHRONOUS 0x00000020 -+#define HIF_EMODE_MASK (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS) -+ -+/* -+ * dmode - An interface may support different kinds of commands based on -+ * the tradeoff between the amount of data it can carry and the -+ * setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/ -+ * HIF_BLOCK_BASIS). In case of latter, the data is rounded off -+ * to the nearest block size by padding. The size of the block is -+ * configurable at compile time using the HIF_BLOCK_SIZE and is -+ * negotiated with the target during initialization after the -+ * dragon interrupts are enabled. -+ */ -+#define HIF_BYTE_BASIS 0x00000040 -+#define HIF_BLOCK_BASIS 0x00000080 -+#define HIF_DMODE_MASK (HIF_BYTE_BASIS | HIF_BLOCK_BASIS) -+ -+/* -+ * amode - This indicates if the address has to be incremented on dragon -+ * after every read/write operation (HIF?FIXED_ADDRESS/ -+ * HIF_INCREMENTAL_ADDRESS). -+ */ -+#define HIF_FIXED_ADDRESS 0x00000100 -+#define HIF_INCREMENTAL_ADDRESS 0x00000200 -+#define HIF_AMODE_MASK (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS) -+ -+#define HIF_WR_ASYNC_BYTE_FIX \ -+ (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) -+#define HIF_WR_ASYNC_BYTE_INC \ -+ (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) -+#define HIF_WR_ASYNC_BLOCK_INC \ -+ (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) -+#define HIF_WR_SYNC_BYTE_FIX \ -+ (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) -+#define HIF_WR_SYNC_BYTE_INC \ -+ (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) -+#define HIF_WR_SYNC_BLOCK_INC \ -+ (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) -+#define HIF_RD_SYNC_BYTE_INC \ -+ (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) -+#define HIF_RD_SYNC_BYTE_FIX \ -+ (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) -+#define HIF_RD_ASYNC_BYTE_FIX \ -+ (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) -+#define HIF_RD_ASYNC_BLOCK_FIX \ -+ (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS) -+#define HIF_RD_ASYNC_BYTE_INC \ -+ (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) -+#define HIF_RD_ASYNC_BLOCK_INC \ -+ (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) -+#define HIF_RD_SYNC_BLOCK_INC \ -+ (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) -+ -+ -+typedef enum { -+ HIF_DEVICE_POWER_STATE = 0, -+ HIF_DEVICE_GET_MBOX_BLOCK_SIZE, -+ HIF_DEVICE_GET_MBOX_ADDR, -+ HIF_DEVICE_GET_PENDING_EVENTS_FUNC, -+ HIF_DEVICE_GET_IRQ_PROC_MODE, -+ HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC, -+} HIF_DEVICE_CONFIG_OPCODE; -+ -+/* -+ * HIF CONFIGURE definitions: -+ * -+ * HIF_DEVICE_GET_MBOX_BLOCK_SIZE -+ * input : none -+ * output : array of 4 A_UINT32s -+ * notes: block size is returned for each mailbox (4) -+ * -+ * HIF_DEVICE_GET_MBOX_ADDR -+ * input : none -+ * output : array of 4 A_UINT32 -+ * notes: address is returned for each mailbox (4) in the array -+ * -+ * HIF_DEVICE_GET_PENDING_EVENTS_FUNC -+ * input : none -+ * output: HIF_PENDING_EVENTS_FUNC function pointer -+ * notes: this is optional for the HIF layer, if the request is -+ * not handled then it indicates that the upper layer can use -+ * the standard device methods to get pending events (IRQs, mailbox messages etc..) -+ * otherwise it can call the function pointer to check pending events. -+ * -+ * HIF_DEVICE_GET_IRQ_PROC_MODE -+ * input : none -+ * output : HIF_DEVICE_IRQ_PROCESSING_MODE (interrupt processing mode) -+ * note: the hif layer interfaces with the underlying OS-specific bus driver. The HIF -+ * layer can report whether IRQ processing is requires synchronous behavior or -+ * can be processed using asynchronous bus requests (typically faster). -+ * -+ * HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC -+ * input : -+ * output : HIF_MASK_UNMASK_RECV_EVENT function pointer -+ * notes: this is optional for the HIF layer. The HIF layer may require a special mechanism -+ * to mask receive message events. The upper layer can call this pointer when it needs -+ * to mask/unmask receive events (in case it runs out of buffers). -+ * -+ * -+ */ -+ -+typedef enum { -+ HIF_DEVICE_IRQ_SYNC_ONLY, /* for HIF implementations that require the DSR to process all -+ interrupts before returning */ -+ HIF_DEVICE_IRQ_ASYNC_SYNC, /* for HIF implementations that allow DSR to process interrupts -+ using ASYNC I/O (that is HIFAckInterrupt can be called at a -+ later time */ -+} HIF_DEVICE_IRQ_PROCESSING_MODE; -+ -+#define HIF_MAX_DEVICES 1 -+ -+struct htc_callbacks { -+ A_UCHAR *name; -+ A_UINT32 id; -+ A_STATUS (* deviceInsertedHandler)(void *hif_handle); -+ A_STATUS (* deviceRemovedHandler)(void *htc_handle, A_STATUS status); -+ A_STATUS (* deviceSuspendHandler)(void *htc_handle); -+ A_STATUS (* deviceResumeHandler)(void *htc_handle); -+ A_STATUS (* deviceWakeupHandler)(void *htc_handle); -+ A_STATUS (* rwCompletionHandler)(void *context, A_STATUS status); -+ A_STATUS (* dsrHandler)(void *htc_handle); -+}; -+ -+ -+#define HIF_OTHER_EVENTS (1 << 0) /* other interrupts (non-Recv) are pending, host -+ needs to read the register table to figure out what */ -+#define HIF_RECV_MSG_AVAIL (1 << 1) /* pending recv packet */ -+ -+typedef struct _HIF_PENDING_EVENTS_INFO { -+ A_UINT32 Events; -+ A_UINT32 LookAhead; -+} HIF_PENDING_EVENTS_INFO; -+ -+ /* function to get pending events , some HIF modules use special mechanisms -+ * to detect packet available and other interrupts */ -+typedef A_STATUS ( *HIF_PENDING_EVENTS_FUNC)(HIF_DEVICE *device, -+ HIF_PENDING_EVENTS_INFO *pEvents, -+ void *AsyncContext); -+ -+#define HIF_MASK_RECV TRUE -+#define HIF_UNMASK_RECV FALSE -+ /* function to mask recv events */ -+typedef A_STATUS ( *HIF_MASK_UNMASK_RECV_EVENT)(HIF_DEVICE *device, -+ A_BOOL Mask, -+ void *AsyncContext); -+ -+ -+/* -+ * This API is used by the HTC layer to initialize the HIF layer and to -+ * register different callback routines. Support for following events has -+ * been captured - DSR, Read/Write completion, Device insertion/removal, -+ * Device suspension/resumption/wakeup. In addition to this, the API is -+ * also used to register the name and the revision of the chip. The latter -+ * can be used to verify the revision of the chip read from the device -+ * before reporting it to HTC. -+ */ -+int HIFInit(HTC_CALLBACKS *callbacks); -+ -+/* -+ * This API is used to provide the read/write interface over the specific bus -+ * interface. -+ * address - Starting address in the dragon's address space. For mailbox -+ * writes, it refers to the start of the mbox boundary. It should -+ * be ensured that the last byte falls on the mailbox's EOM. For -+ * mailbox reads, it refers to the end of the mbox boundary. -+ * buffer - Pointer to the buffer containg the data to be transmitted or -+ * received. -+ * length - Amount of data to be transmitted or received. -+ * request - Characterizes the attributes of the command. -+ */ -+A_STATUS -+HIFReadWrite(HIF_DEVICE *device, -+ A_UINT32 address, -+ A_UCHAR *buffer, -+ A_UINT32 length, -+ A_UINT32 request, -+ void *context); -+ -+/* -+ * This can be initiated from the unload driver context ie when the HTCShutdown -+ * routine is called. -+ */ -+void HIFShutDownDevice(HIF_DEVICE *device); -+ -+/* -+ * This should translate to an acknowledgment to the bus driver indicating that -+ * the previous interrupt request has been serviced and the all the relevant -+ * sources have been cleared. HTC is ready to process more interrupts. -+ * This should prevent the bus driver from raising an interrupt unless the -+ * previous one has been serviced and acknowledged using the previous API. -+ */ -+void HIFAckInterrupt(HIF_DEVICE *device); -+ -+void HIFMaskInterrupt(HIF_DEVICE *device); -+ -+void HIFUnMaskInterrupt(HIF_DEVICE *device); -+ -+/* -+ * This set of functions are to be used by the bus driver to notify -+ * the HIF module about various events. -+ * These are not implemented if the bus driver provides an alternative -+ * way for this notification though callbacks for instance. -+ */ -+int HIFInsertEventNotify(void); -+ -+int HIFRemoveEventNotify(void); -+ -+int HIFIRQEventNotify(void); -+ -+int HIFRWCompleteEventNotify(void); -+ -+/* -+ * This function associates a opaque handle with the HIF layer -+ * to be used in communication with upper layer i.e. HTC. -+ * This would normaly be a pointer to htc_target data structure. -+ */ -+void HIFSetHandle(void *hif_handle, void *handle); -+ -+A_STATUS -+HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode, -+ void *config, A_UINT32 configLen); -+ -+ -+struct device; -+struct device* -+HIFGetOSDevice(HIF_DEVICE *device); -+ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _HIF_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/host_version.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/host_version.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,49 @@ -+#ifndef _HOST_VERSION_H_ -+#define _HOST_VERSION_H_ -+/* -+ * Copyright (c) 2004-2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * This file contains version information for the sample host driver for the -+ * AR6000 chip -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/host_version.h#2 $ -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#include -+ -+/* -+ * The version number is made up of major, minor, patch and build -+ * numbers. These are 16 bit numbers. The build and release script will -+ * set the build number using a Perforce counter. Here the build number is -+ * set to 9999 so that builds done without the build-release script are easily -+ * identifiable. -+ */ -+ -+#define ATH_SW_VER_MAJOR __VER_MAJOR_ -+#define ATH_SW_VER_MINOR __VER_MINOR_ -+#define ATH_SW_VER_PATCH __VER_PATCH_ -+#define ATH_SW_VER_BUILD 9999 -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _HOST_VERSION_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/htc_api.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/htc_api.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,436 @@ -+/* -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef _HTC_API_H_ -+#define _HTC_API_H_ -+ -+#include -+#include -+#include "htc_packet.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif /* __cplusplus */ -+ -+/* TODO.. for BMI */ -+#define ENDPOINT1 0 -+// TODO -remove me, but we have to fix BMI first -+#define HTC_MAILBOX_NUM_MAX 4 -+ -+ -+/* ------ Endpoint IDS ------ */ -+typedef enum -+{ -+ ENDPOINT_UNUSED = -1, -+ ENDPOINT_0 = 0, -+ ENDPOINT_1 = 1, -+ ENDPOINT_2 = 2, -+ ENDPOINT_3, -+ ENDPOINT_4, -+ ENDPOINT_5, -+ ENDPOINT_6, -+ ENDPOINT_7, -+ ENDPOINT_8, -+ ENDPOINT_MAX, -+} HTC_ENDPOINT_ID; -+ -+/* this is the amount of header room required by users of HTC */ -+#define HTC_HEADER_LEN HTC_HDR_LENGTH -+ -+typedef void *HTC_HANDLE; -+ -+typedef A_UINT16 HTC_SERVICE_ID; -+ -+typedef struct _HTC_INIT_INFO { -+ void (*AddInstance)(HTC_HANDLE); -+ void (*DeleteInstance)(void *Instance); -+ void (*TargetFailure)(void *Instance, A_STATUS Status); -+} HTC_INIT_INFO; -+ -+/* per service connection send completion */ -+typedef void (*HTC_EP_SEND_PKT_COMPLETE)(void *,HTC_PACKET *); -+/* per service connection pkt received */ -+typedef void (*HTC_EP_RECV_PKT)(void *,HTC_PACKET *); -+ -+/* Optional per service connection receive buffer re-fill callback, -+ * On some OSes (like Linux) packets are allocated from a global pool and indicated up -+ * to the network stack. The driver never gets the packets back from the OS. For these OSes -+ * a refill callback can be used to allocate and re-queue buffers into HTC. -+ * -+ * On other OSes, the network stack can call into the driver's OS-specifc "return_packet" handler and -+ * the driver can re-queue these buffers into HTC. In this regard a refill callback is -+ * unnecessary */ -+typedef void (*HTC_EP_RECV_REFILL)(void *, HTC_ENDPOINT_ID Endpoint); -+ -+/* Optional per service connection callback when a send queue is full. This can occur if the -+ * host continues queueing up TX packets faster than credits can arrive -+ * To prevent the host (on some Oses like Linux) from continuously queueing packets -+ * and consuming resources, this callback is provided so that that the host -+ * can disable TX in the subsystem (i.e. network stack) -+ * Other OSes require a "per-packet" indication_RAW_STREAM_NUM_MAX for each completed TX packet, this -+ * closed loop mechanism will prevent the network stack from overunning the NIC */ -+typedef void (*HTC_EP_SEND_QUEUE_FULL)(void *, HTC_ENDPOINT_ID Endpoint); -+ -+typedef struct _HTC_EP_CALLBACKS { -+ void *pContext; /* context for each callback */ -+ HTC_EP_SEND_PKT_COMPLETE EpTxComplete; /* tx completion callback for connected endpoint */ -+ HTC_EP_RECV_PKT EpRecv; /* receive callback for connected endpoint */ -+ HTC_EP_RECV_REFILL EpRecvRefill; /* OPTIONAL receive re-fill callback for connected endpoint */ -+ HTC_EP_SEND_QUEUE_FULL EpSendFull; /* OPTIONAL send full callback */ -+} HTC_EP_CALLBACKS; -+ -+/* service connection information */ -+typedef struct _HTC_SERVICE_CONNECT_REQ { -+ HTC_SERVICE_ID ServiceID; /* service ID to connect to */ -+ A_UINT16 ConnectionFlags; /* connection flags, see htc protocol definition */ -+ A_UINT8 *pMetaData; /* ptr to optional service-specific meta-data */ -+ A_UINT8 MetaDataLength; /* optional meta data length */ -+ HTC_EP_CALLBACKS EpCallbacks; /* endpoint callbacks */ -+ int MaxSendQueueDepth; /* maximum depth of any send queue */ -+} HTC_SERVICE_CONNECT_REQ; -+ -+/* service connection response information */ -+typedef struct _HTC_SERVICE_CONNECT_RESP { -+ A_UINT8 *pMetaData; /* caller supplied buffer to optional meta-data */ -+ A_UINT8 BufferLength; /* length of caller supplied buffer */ -+ A_UINT8 ActualLength; /* actual length of meta data */ -+ HTC_ENDPOINT_ID Endpoint; /* endpoint to communicate over */ -+ int MaxMsgLength; /* max length of all messages over this endpoint */ -+ A_UINT8 ConnectRespCode; /* connect response code from target */ -+} HTC_SERVICE_CONNECT_RESP; -+ -+/* endpoint distribution structure */ -+typedef struct _HTC_ENDPOINT_CREDIT_DIST { -+ struct _HTC_ENDPOINT_CREDIT_DIST *pNext; -+ struct _HTC_ENDPOINT_CREDIT_DIST *pPrev; -+ HTC_SERVICE_ID ServiceID; /* Service ID (set by HTC) */ -+ HTC_ENDPOINT_ID Endpoint; /* endpoint for this distribution struct (set by HTC) */ -+ A_UINT32 DistFlags; /* distribution flags, distribution function can -+ set default activity using SET_EP_ACTIVE() macro */ -+ int TxCreditsNorm; /* credits for normal operation, anything above this -+ indicates the endpoint is over-subscribed, this field -+ is only relevant to the credit distribution function */ -+ int TxCreditsMin; /* floor for credit distribution, this field is -+ only relevant to the credit distribution function */ -+ int TxCreditsAssigned; /* number of credits assigned to this EP, this field -+ is only relevant to the credit dist function */ -+ int TxCredits; /* current credits available, this field is used by -+ HTC to determine whether a message can be sent or -+ must be queued */ -+ int TxCreditsToDist; /* pending credits to distribute on this endpoint, this -+ is set by HTC when credit reports arrive. -+ The credit distribution functions sets this to zero -+ when it distributes the credits */ -+ int TxCreditsSeek; /* this is the number of credits that the current pending TX -+ packet needs to transmit. This is set by HTC when -+ and endpoint needs credits in order to transmit */ -+ int TxCreditSize; /* size in bytes of each credit (set by HTC) */ -+ int TxCreditsPerMaxMsg; /* credits required for a maximum sized messages (set by HTC) */ -+ void *pHTCReserved; /* reserved for HTC use */ -+} HTC_ENDPOINT_CREDIT_DIST; -+ -+#define HTC_EP_ACTIVE (1 << 31) -+ -+/* macro to check if an endpoint has gone active, useful for credit -+ * distributions */ -+#define IS_EP_ACTIVE(epDist) ((epDist)->DistFlags & HTC_EP_ACTIVE) -+#define SET_EP_ACTIVE(epDist) (epDist)->DistFlags |= HTC_EP_ACTIVE -+ -+ /* credit distibution code that is passed into the distrbution function, -+ * there are mandatory and optional codes that must be handled */ -+typedef enum _HTC_CREDIT_DIST_REASON { -+ HTC_CREDIT_DIST_SEND_COMPLETE = 0, /* credits available as a result of completed -+ send operations (MANDATORY) resulting in credit reports */ -+ HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1, /* a change in endpoint activity occured (OPTIONAL) */ -+ HTC_CREDIT_DIST_SEEK_CREDITS, /* an endpoint needs to "seek" credits (OPTIONAL) */ -+ HTC_DUMP_CREDIT_STATE /* for debugging, dump any state information that is kept by -+ the distribution function */ -+} HTC_CREDIT_DIST_REASON; -+ -+typedef void (*HTC_CREDIT_DIST_CALLBACK)(void *Context, -+ HTC_ENDPOINT_CREDIT_DIST *pEPList, -+ HTC_CREDIT_DIST_REASON Reason); -+ -+typedef void (*HTC_CREDIT_INIT_CALLBACK)(void *Context, -+ HTC_ENDPOINT_CREDIT_DIST *pEPList, -+ int TotalCredits); -+ -+ /* endpoint statistics action */ -+typedef enum _HTC_ENDPOINT_STAT_ACTION { -+ HTC_EP_STAT_SAMPLE = 0, /* only read statistics */ -+ HTC_EP_STAT_SAMPLE_AND_CLEAR = 1, /* sample and immediately clear statistics */ -+ HTC_EP_STAT_CLEAR /* clear only */ -+} HTC_ENDPOINT_STAT_ACTION; -+ -+ /* endpoint statistics */ -+typedef struct _HTC_ENDPOINT_STATS { -+ A_UINT32 TxCreditLowIndications; /* number of times the host set the credit-low flag in a send message on -+ this endpoint */ -+ A_UINT32 TxIssued; /* running count of TX packets issued */ -+ A_UINT32 TxCreditRpts; /* running count of total credit reports received for this endpoint */ -+ A_UINT32 TxCreditRptsFromRx; -+ A_UINT32 TxCreditRptsFromOther; -+ A_UINT32 TxCreditRptsFromEp0; -+ A_UINT32 TxCreditsFromRx; /* count of credits received via Rx packets on this endpoint */ -+ A_UINT32 TxCreditsFromOther; /* count of credits received via another endpoint */ -+ A_UINT32 TxCreditsFromEp0; /* count of credits received via another endpoint */ -+ A_UINT32 TxCreditsConsummed; /* count of consummed credits */ -+ A_UINT32 TxCreditsReturned; /* count of credits returned */ -+ A_UINT32 RxReceived; /* count of RX packets received */ -+ A_UINT32 RxLookAheads; /* count of lookahead records -+ found in messages received on this endpoint */ -+} HTC_ENDPOINT_STATS; -+ -+/* ------ Function Prototypes ------ */ -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Initialize HTC -+ @function name: HTCInit -+ @input: pInfo - initialization information -+ @output: -+ @return: A_OK on success -+ @notes: The caller initializes global HTC state and registers various instance -+ notification callbacks (see HTC_INIT_INFO). -+ -+ @example: -+ @see also: HTCShutdown -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+A_STATUS HTCInit(HTC_INIT_INFO *pInfo); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Get the underlying HIF device handle -+ @function name: HTCGetHifDevice -+ @input: HTCHandle - handle passed into the AddInstance callback -+ @output: -+ @return: opaque HIF device handle usable in HIF API calls. -+ @notes: -+ @example: -+ @see also: -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+void *HTCGetHifDevice(HTC_HANDLE HTCHandle); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Set the associated instance for the HTC handle -+ @function name: HTCSetInstance -+ @input: HTCHandle - handle passed into the AddInstance callback -+ Instance - caller supplied instance object -+ @output: -+ @return: -+ @notes: Caller must set the instance information for the HTC handle in order to receive -+ notifications for instance deletion (DeleteInstance callback is called) and for target -+ failure notification. -+ @example: -+ @see also: -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Set credit distribution parameters -+ @function name: HTCSetCreditDistribution -+ @input: HTCHandle - HTC handle -+ pCreditDistCont - caller supplied context to pass into distribution functions -+ CreditDistFunc - Distribution function callback -+ CreditDistInit - Credit Distribution initialization callback -+ ServicePriorityOrder - Array containing list of service IDs, lowest index is highest -+ priority -+ ListLength - number of elements in ServicePriorityOrder -+ @output: -+ @return: -+ @notes: The user can set a custom credit distribution function to handle special requirements -+ for each endpoint. A default credit distribution routine can be used by setting -+ CreditInitFunc to NULL. The default credit distribution is only provided for simple -+ "fair" credit distribution without regard to any prioritization. -+ -+ @example: -+ @see also: -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+void HTCSetCreditDistribution(HTC_HANDLE HTCHandle, -+ void *pCreditDistContext, -+ HTC_CREDIT_DIST_CALLBACK CreditDistFunc, -+ HTC_CREDIT_INIT_CALLBACK CreditInitFunc, -+ HTC_SERVICE_ID ServicePriorityOrder[], -+ int ListLength); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Wait for the target to indicate the HTC layer is ready -+ @function name: HTCWaitTarget -+ @input: HTCHandle - HTC handle -+ @output: -+ @return: -+ @notes: This API blocks until the target responds with an HTC ready message. -+ The caller should not connect services until the target has indicated it is -+ ready. -+ @example: -+ @see also: HTCConnectService -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Start target service communications -+ @function name: HTCStart -+ @input: HTCHandle - HTC handle -+ @output: -+ @return: -+ @notes: This API indicates to the target that the service connection phase is complete -+ and the target can freely start all connected services. This API should only be -+ called AFTER all service connections have been made. TCStart will issue a -+ SETUP_COMPLETE message to the target to indicate that all service connections -+ have been made and the target can start communicating over the endpoints. -+ @example: -+ @see also: HTCConnectService -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+A_STATUS HTCStart(HTC_HANDLE HTCHandle); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Add receive packet to HTC -+ @function name: HTCAddReceivePkt -+ @input: HTCHandle - HTC handle -+ pPacket - HTC receive packet to add -+ @output: -+ @return: A_OK on success -+ @notes: user must supply HTC packets for capturing incomming HTC frames. The caller -+ must initialize each HTC packet using the SET_HTC_PACKET_INFO_RX_REFILL() -+ macro. -+ @example: -+ @see also: -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Connect to an HTC service -+ @function name: HTCConnectService -+ @input: HTCHandle - HTC handle -+ pReq - connection details -+ @output: pResp - connection response -+ @return: -+ @notes: Service connections must be performed before HTCStart. User provides callback handlers -+ for various endpoint events. -+ @example: -+ @see also: HTCStart -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+A_STATUS HTCConnectService(HTC_HANDLE HTCHandle, -+ HTC_SERVICE_CONNECT_REQ *pReq, -+ HTC_SERVICE_CONNECT_RESP *pResp); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Send an HTC packet -+ @function name: HTCSendPkt -+ @input: HTCHandle - HTC handle -+ pPacket - packet to send -+ @output: -+ @return: A_OK -+ @notes: Caller must initialize packet using SET_HTC_PACKET_INFO_TX() macro. -+ This interface is fully asynchronous. On error, HTC SendPkt will -+ call the registered Endpoint callback to cleanup the packet. -+ @example: -+ @see also: HTCFlushEndpoint -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Stop HTC service communications -+ @function name: HTCStop -+ @input: HTCHandle - HTC handle -+ @output: -+ @return: -+ @notes: HTC communications is halted. All receive and pending TX packets will -+ be flushed. -+ @example: -+ @see also: -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+void HTCStop(HTC_HANDLE HTCHandle); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Shutdown HTC -+ @function name: HTCShutdown -+ @input: -+ @output: -+ @return: -+ @notes: This cleans up all resources allocated by HTCInit(). -+ @example: -+ @see also: HTCInit -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+void HTCShutDown(void); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Flush pending TX packets -+ @function name: HTCFlushEndpoint -+ @input: HTCHandle - HTC handle -+ Endpoint - Endpoint to flush -+ Tag - flush tag -+ @output: -+ @return: -+ @notes: The Tag parameter is used to selectively flush packets with matching tags. -+ The value of 0 forces all packets to be flush regardless of tag. -+ @example: -+ @see also: HTCSendPkt -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Dump credit distribution state -+ @function name: HTCDumpCreditStates -+ @input: HTCHandle - HTC handle -+ @output: -+ @return: -+ @notes: This dumps all credit distribution information to the debugger -+ @example: -+ @see also: -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+void HTCDumpCreditStates(HTC_HANDLE HTCHandle); -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Indicate a traffic activity change on an endpoint -+ @function name: HTCIndicateActivityChange -+ @input: HTCHandle - HTC handle -+ Endpoint - endpoint in which activity has changed -+ Active - TRUE if active, FALSE if it has become inactive -+ @output: -+ @return: -+ @notes: This triggers the registered credit distribution function to -+ re-adjust credits for active/inactive endpoints. -+ @example: -+ @see also: -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+void HTCIndicateActivityChange(HTC_HANDLE HTCHandle, -+ HTC_ENDPOINT_ID Endpoint, -+ A_BOOL Active); -+ -+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -+ @desc: Get endpoint statistics -+ @function name: HTCGetEndpointStatistics -+ @input: HTCHandle - HTC handle -+ Endpoint - Endpoint identifier -+ Action - action to take with statistics -+ @output: -+ pStats - statistics that were sampled (can be NULL if Action is HTC_EP_STAT_CLEAR) -+ -+ @return: TRUE if statistics profiling is enabled, otherwise FALSE. -+ -+ @notes: Statistics is a compile-time option and this function may return FALSE -+ if HTC is not compiled with profiling. -+ -+ The caller can specify the statistic "action" to take when sampling -+ the statistics. This includes: -+ -+ HTC_EP_STAT_SAMPLE: The pStats structure is filled with the current values. -+ HTC_EP_STAT_SAMPLE_AND_CLEAR: The structure is filled and the current statistics -+ are cleared. -+ HTC_EP_STAT_CLEA : the statistics are cleared, the called can pass a NULL value for -+ pStats -+ -+ @example: -+ @see also: -++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ -+A_BOOL HTCGetEndpointStatistics(HTC_HANDLE HTCHandle, -+ HTC_ENDPOINT_ID Endpoint, -+ HTC_ENDPOINT_STAT_ACTION Action, -+ HTC_ENDPOINT_STATS *pStats); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _HTC_API_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/htc.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/htc.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,190 @@ -+/* -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+ -+ -+#ifndef __HTC_H__ -+#define __HTC_H__ -+ -+#ifndef ATH_TARGET -+#include "athstartpack.h" -+#endif -+ -+#define A_OFFSETOF(type,field) (int)(&(((type *)NULL)->field)) -+ -+#define ASSEMBLE_UNALIGNED_UINT16(p,highbyte,lowbyte) \ -+ (((A_UINT16)(((A_UINT8 *)(p))[(highbyte)])) << 8 | (A_UINT16)(((A_UINT8 *)(p))[(lowbyte)])) -+ -+/* alignment independent macros (little-endian) to fetch UINT16s or UINT8s from a -+ * structure using only the type and field name. -+ * Use these macros if there is the potential for unaligned buffer accesses. */ -+#define A_GET_UINT16_FIELD(p,type,field) \ -+ ASSEMBLE_UNALIGNED_UINT16(p,\ -+ A_OFFSETOF(type,field) + 1, \ -+ A_OFFSETOF(type,field)) -+ -+#define A_SET_UINT16_FIELD(p,type,field,value) \ -+{ \ -+ ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (A_UINT8)(value); \ -+ ((A_UINT8 *)(p))[A_OFFSETOF(type,field) + 1] = (A_UINT8)((value) >> 8); \ -+} -+ -+#define A_GET_UINT8_FIELD(p,type,field) \ -+ ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] -+ -+#define A_SET_UINT8_FIELD(p,type,field,value) \ -+ ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (value) -+ -+/****** DANGER DANGER *************** -+ * -+ * The frame header length and message formats defined herein were -+ * selected to accommodate optimal alignment for target processing. This reduces code -+ * size and improves performance. -+ * -+ * Any changes to the header length may alter the alignment and cause exceptions -+ * on the target. When adding to the message structures insure that fields are -+ * properly aligned. -+ * -+ */ -+ -+/* HTC frame header */ -+typedef PREPACK struct _HTC_FRAME_HDR{ -+ /* do not remove or re-arrange these fields, these are minimally required -+ * to take advantage of 4-byte lookaheads in some hardware implementations */ -+ A_UINT8 EndpointID; -+ A_UINT8 Flags; -+ A_UINT16 PayloadLen; /* length of data (including trailer) that follows the header */ -+ -+ /***** end of 4-byte lookahead ****/ -+ -+ A_UINT8 ControlBytes[2]; -+ -+ /* message payload starts after the header */ -+ -+} POSTPACK HTC_FRAME_HDR; -+ -+/* frame header flags */ -+#define HTC_FLAGS_NEED_CREDIT_UPDATE (1 << 0) -+#define HTC_FLAGS_RECV_TRAILER (1 << 1) -+ -+ -+#define HTC_HDR_LENGTH (sizeof(HTC_FRAME_HDR)) -+#define HTC_MAX_TRAILER_LENGTH 255 -+#define HTC_MAX_PAYLOAD_LENGTH (2048 - sizeof(HTC_FRAME_HDR)) -+ -+/* HTC control message IDs */ -+typedef enum { -+ HTC_MSG_READY_ID = 1, -+ HTC_MSG_CONNECT_SERVICE_ID = 2, -+ HTC_MSG_CONNECT_SERVICE_RESPONSE_ID = 3, -+ HTC_MSG_SETUP_COMPLETE_ID = 4, -+} HTC_MSG_IDS; -+ -+#define HTC_MAX_CONTROL_MESSAGE_LENGTH 256 -+ -+/* base message ID header */ -+typedef PREPACK struct { -+ A_UINT16 MessageID; -+} POSTPACK HTC_UNKNOWN_MSG; -+ -+/* HTC ready message -+ * direction : target-to-host */ -+typedef PREPACK struct { -+ A_UINT16 MessageID; /* ID */ -+ A_UINT16 CreditCount; /* number of credits the target can offer */ -+ A_UINT16 CreditSize; /* size of each credit */ -+ A_UINT8 MaxEndpoints; /* maximum number of endpoints the target has resources for */ -+ A_UINT8 _Pad1; -+} POSTPACK HTC_READY_MSG; -+ -+#define HTC_SERVICE_META_DATA_MAX_LENGTH 128 -+ -+/* connect service -+ * direction : host-to-target */ -+typedef PREPACK struct { -+ A_UINT16 MessageID; -+ A_UINT16 ServiceID; /* service ID of the service to connect to */ -+ A_UINT16 ConnectionFlags; /* connection flags */ -+ -+#define HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE (1 << 2) /* reduce credit dribbling when -+ the host needs credits */ -+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK (0x3) -+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_FOURTH 0x0 -+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF 0x1 -+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_THREE_FOURTHS 0x2 -+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_UNITY 0x3 -+ -+ A_UINT8 ServiceMetaLength; /* length of meta data that follows */ -+ A_UINT8 _Pad1; -+ -+ /* service-specific meta data starts after the header */ -+ -+} POSTPACK HTC_CONNECT_SERVICE_MSG; -+ -+/* connect response -+ * direction : target-to-host */ -+typedef PREPACK struct { -+ A_UINT16 MessageID; -+ A_UINT16 ServiceID; /* service ID that the connection request was made */ -+ A_UINT8 Status; /* service connection status */ -+ A_UINT8 EndpointID; /* assigned endpoint ID */ -+ A_UINT16 MaxMsgSize; /* maximum expected message size on this endpoint */ -+ A_UINT8 ServiceMetaLength; /* length of meta data that follows */ -+ A_UINT8 _Pad1; -+ -+ /* service-specific meta data starts after the header */ -+ -+} POSTPACK HTC_CONNECT_SERVICE_RESPONSE_MSG; -+ -+typedef PREPACK struct { -+ A_UINT16 MessageID; -+ /* currently, no other fields */ -+} POSTPACK HTC_SETUP_COMPLETE_MSG; -+ -+ -+/* connect response status codes */ -+#define HTC_SERVICE_SUCCESS 0 /* success */ -+#define HTC_SERVICE_NOT_FOUND 1 /* service could not be found */ -+#define HTC_SERVICE_FAILED 2 /* specific service failed the connect */ -+#define HTC_SERVICE_NO_RESOURCES 3 /* no resources (i.e. no more endpoints) */ -+#define HTC_SERVICE_NO_MORE_EP 4 /* specific service is not allowing any more -+ endpoints */ -+ -+/* report record IDs */ -+typedef enum { -+ HTC_RECORD_NULL = 0, -+ HTC_RECORD_CREDITS = 1, -+ HTC_RECORD_LOOKAHEAD = 2, -+} HTC_RPT_IDS; -+ -+typedef PREPACK struct { -+ A_UINT8 RecordID; /* Record ID */ -+ A_UINT8 Length; /* Length of record */ -+} POSTPACK HTC_RECORD_HDR; -+ -+typedef PREPACK struct { -+ A_UINT8 EndpointID; /* Endpoint that owns these credits */ -+ A_UINT8 Credits; /* credits to report since last report */ -+} POSTPACK HTC_CREDIT_REPORT; -+ -+typedef PREPACK struct { -+ A_UINT8 PreValid; /* pre valid guard */ -+ A_UINT8 LookAhead[4]; /* 4 byte lookahead */ -+ A_UINT8 PostValid; /* post valid guard */ -+ -+ /* NOTE: the LookAhead array is guarded by a PreValid and Post Valid guard bytes. -+ * The PreValid bytes must equal the inverse of the PostValid byte */ -+ -+} POSTPACK HTC_LOOKAHEAD_REPORT; -+ -+#ifndef ATH_TARGET -+#include "athendpack.h" -+#endif -+ -+ -+#endif /* __HTC_H__ */ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/htc_packet.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/htc_packet.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,138 @@ -+/* -+ * -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifndef HTC_PACKET_H_ -+#define HTC_PACKET_H_ -+ -+ -+#include "dl_list.h" -+ -+struct _HTC_PACKET; -+ -+typedef void (* HTC_PACKET_COMPLETION)(void *,struct _HTC_PACKET *); -+ -+typedef A_UINT16 HTC_TX_TAG; -+ -+typedef struct _HTC_TX_PACKET_INFO { -+ HTC_TX_TAG Tag; /* tag used to selective flush packets */ -+} HTC_TX_PACKET_INFO; -+ -+#define HTC_TX_PACKET_TAG_ALL 0 /* a tag of zero is reserved and used to flush ALL packets */ -+#define HTC_TX_PACKET_TAG_INTERNAL 1 /* internal tags start here */ -+#define HTC_TX_PACKET_TAG_USER_DEFINED (HTC_TX_PACKET_TAG_INTERNAL + 9) /* user-defined tags start here */ -+ -+typedef struct _HTC_RX_PACKET_INFO { -+ A_UINT32 Unused; /* for future use and to make compilers happy */ -+} HTC_RX_PACKET_INFO; -+ -+/* wrapper around endpoint-specific packets */ -+typedef struct _HTC_PACKET { -+ DL_LIST ListLink; /* double link */ -+ void *pPktContext; /* caller's per packet specific context */ -+ -+ A_UINT8 *pBufferStart; /* the true buffer start , the caller can -+ store the real buffer start here. In -+ receive callbacks, the HTC layer sets pBuffer -+ to the start of the payload past the header. This -+ field allows the caller to reset pBuffer when it -+ recycles receive packets back to HTC */ -+ /* -+ * Pointer to the start of the buffer. In the transmit -+ * direction this points to the start of the payload. In the -+ * receive direction, however, the buffer when queued up -+ * points to the start of the HTC header but when returned -+ * to the caller points to the start of the payload -+ */ -+ A_UINT8 *pBuffer; /* payload start (RX/TX) */ -+ A_UINT32 BufferLength; /* length of buffer */ -+ A_UINT32 ActualLength; /* actual length of payload */ -+ int Endpoint; /* endpoint that this packet was sent/recv'd from */ -+ A_STATUS Status; /* completion status */ -+ union { -+ HTC_TX_PACKET_INFO AsTx; /* Tx Packet specific info */ -+ HTC_RX_PACKET_INFO AsRx; /* Rx Packet specific info */ -+ } PktInfo; -+ -+ /* the following fields are for internal HTC use */ -+ HTC_PACKET_COMPLETION Completion; /* completion */ -+ void *pContext; /* HTC private completion context */ -+ A_UINT32 HTCReserved; /* reserved */ -+} HTC_PACKET; -+ -+ -+ -+#define COMPLETE_HTC_PACKET(p,status) \ -+{ \ -+ (p)->Status = (status); \ -+ (p)->Completion((p)->pContext,(p)); \ -+} -+ -+#define INIT_HTC_PACKET_INFO(p,b,len) \ -+{ \ -+ (p)->pBufferStart = (b); \ -+ (p)->BufferLength = (len); \ -+} -+ -+/* macro to set an initial RX packet for refilling HTC */ -+#define SET_HTC_PACKET_INFO_RX_REFILL(p,c,b,len,ep) \ -+{ \ -+ (p)->pPktContext = (c); \ -+ (p)->pBuffer = (b); \ -+ (p)->pBufferStart = (b); \ -+ (p)->BufferLength = (len); \ -+ (p)->Endpoint = (ep); \ -+} -+ -+/* fast macro to recycle an RX packet that will be re-queued to HTC */ -+#define HTC_PACKET_RESET_RX(p) \ -+ (p)->pBuffer = (p)->pBufferStart -+ -+/* macro to set packet parameters for TX */ -+#define SET_HTC_PACKET_INFO_TX(p,c,b,len,ep,tag) \ -+{ \ -+ (p)->pPktContext = (c); \ -+ (p)->pBuffer = (b); \ -+ (p)->ActualLength = (len); \ -+ (p)->Endpoint = (ep); \ -+ (p)->PktInfo.AsTx.Tag = (tag); \ -+} -+ -+/* HTC Packet Queueing Macros */ -+typedef DL_LIST HTC_PACKET_QUEUE; -+/* initialize queue */ -+#define INIT_HTC_PACKET_QUEUE(pQ) DL_LIST_INIT((pQ)) -+/* enqueue HTC packet to the tail of the queue */ -+#define HTC_PACKET_ENQUEUE(pQ,p) DL_ListInsertTail((pQ),&(p)->ListLink) -+/* test if a queue is empty */ -+#define HTC_QUEUE_EMPTY(pQ) DL_LIST_IS_EMPTY((pQ)) -+/* get packet at head without removing it */ -+#define HTC_GET_PKT_AT_HEAD(pQ) A_CONTAINING_STRUCT((DL_LIST_GET_ITEM_AT_HEAD(pQ)),HTC_PACKET,ListLink); -+/* remove a packet from the current list it is linked to */ -+#define HTC_PACKET_REMOVE(p) DL_ListRemove(&(p)->ListLink) -+ -+/* dequeue an HTC packet from the head of the queue */ -+static INLINE HTC_PACKET *HTC_PACKET_DEQUEUE(HTC_PACKET_QUEUE *queue) { -+ DL_LIST *pItem = DL_ListRemoveItemFromHead(queue); -+ if (pItem != NULL) { -+ return A_CONTAINING_STRUCT(pItem, HTC_PACKET, ListLink); -+ } -+ return NULL; -+} -+ -+#endif /*HTC_PACKET_H_*/ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/htc_services.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/htc_services.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,37 @@ -+/* -+ * Copyright (c) 2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+ -+#ifndef __HTC_SERVICES_H__ -+#define __HTC_SERVICES_H__ -+ -+/* Current service IDs */ -+ -+typedef enum { -+ RSVD_SERVICE_GROUP = 0, -+ WMI_SERVICE_GROUP = 1, -+ -+ HTC_TEST_GROUP = 254, -+ HTC_SERVICE_GROUP_LAST = 255 -+}HTC_SERVICE_GROUP_IDS; -+ -+#define MAKE_SERVICE_ID(group,index) \ -+ (int)(((int)group << 8) | (int)(index)) -+ -+/* NOTE: service ID of 0x0000 is reserved and should never be used */ -+#define HTC_CTRL_RSVD_SVC MAKE_SERVICE_ID(RSVD_SERVICE_GROUP,1) -+#define WMI_CONTROL_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,0) -+#define WMI_DATA_BE_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,1) -+#define WMI_DATA_BK_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,2) -+#define WMI_DATA_VI_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,3) -+#define WMI_DATA_VO_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,4) -+#define WMI_MAX_SERVICES 5 -+ -+/* raw stream service (i.e. flash, tcmd, calibration apps) */ -+#define HTC_RAW_STREAMS_SVC MAKE_SERVICE_ID(HTC_TEST_GROUP,0) -+ -+#endif /*HTC_SERVICES_H_*/ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ieee80211.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ieee80211.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,342 @@ -+/*- -+ * Copyright (c) 2001 Atsushi Onoe -+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting -+ * Copyright (c) 2006 Atheros Communications, Inc. -+ * -+ * Wireless Network driver for Atheros AR6001 -+ * All rights reserved. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ */ -+#ifndef _NET80211_IEEE80211_H_ -+#define _NET80211_IEEE80211_H_ -+ -+#include "athstartpack.h" -+ -+/* -+ * 802.11 protocol definitions. -+ */ -+ -+#define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */ -+/* is 802.11 address multicast/broadcast? */ -+#define IEEE80211_IS_MULTICAST(_a) (*(_a) & 0x01) -+#define IEEE80211_ADDR_EQ(addr1, addr2) \ -+ (A_MEMCMP(addr1, addr2, IEEE80211_ADDR_LEN) == 0) -+ -+#define IEEE80211_KEYBUF_SIZE 16 -+#define IEEE80211_MICBUF_SIZE (8+8) /* space for both tx and rx */ -+ -+/* -+ * NB: these values are ordered carefully; there are lots of -+ * of implications in any reordering. In particular beware -+ * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY. -+ */ -+#define IEEE80211_CIPHER_WEP 0 -+#define IEEE80211_CIPHER_TKIP 1 -+#define IEEE80211_CIPHER_AES_OCB 2 -+#define IEEE80211_CIPHER_AES_CCM 3 -+#define IEEE80211_CIPHER_CKIP 5 -+#define IEEE80211_CIPHER_CCKM_KRK 6 -+#define IEEE80211_CIPHER_NONE 7 /* pseudo value */ -+ -+#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE+1) -+ -+#define IEEE80211_IS_VALID_WEP_CIPHER_LEN(len) \ -+ (((len) == 5) || ((len) == 13) || ((len) == 16)) -+ -+ -+ -+/* -+ * generic definitions for IEEE 802.11 frames -+ */ -+PREPACK struct ieee80211_frame { -+ A_UINT8 i_fc[2]; -+ A_UINT8 i_dur[2]; -+ A_UINT8 i_addr1[IEEE80211_ADDR_LEN]; -+ A_UINT8 i_addr2[IEEE80211_ADDR_LEN]; -+ A_UINT8 i_addr3[IEEE80211_ADDR_LEN]; -+ A_UINT8 i_seq[2]; -+ /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ -+ /* see below */ -+} POSTPACK; -+ -+#define IEEE80211_FC0_VERSION_MASK 0x03 -+#define IEEE80211_FC0_VERSION_SHIFT 0 -+#define IEEE80211_FC0_VERSION_0 0x00 -+#define IEEE80211_FC0_TYPE_MASK 0x0c -+#define IEEE80211_FC0_TYPE_SHIFT 2 -+#define IEEE80211_FC0_TYPE_MGT 0x00 -+#define IEEE80211_FC0_TYPE_CTL 0x04 -+#define IEEE80211_FC0_TYPE_DATA 0x08 -+ -+#define IEEE80211_FC0_SUBTYPE_MASK 0xf0 -+#define IEEE80211_FC0_SUBTYPE_SHIFT 4 -+/* for TYPE_MGT */ -+#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ 0x00 -+#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP 0x10 -+#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ 0x20 -+#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP 0x30 -+#define IEEE80211_FC0_SUBTYPE_PROBE_REQ 0x40 -+#define IEEE80211_FC0_SUBTYPE_PROBE_RESP 0x50 -+#define IEEE80211_FC0_SUBTYPE_BEACON 0x80 -+#define IEEE80211_FC0_SUBTYPE_ATIM 0x90 -+#define IEEE80211_FC0_SUBTYPE_DISASSOC 0xa0 -+#define IEEE80211_FC0_SUBTYPE_AUTH 0xb0 -+#define IEEE80211_FC0_SUBTYPE_DEAUTH 0xc0 -+/* for TYPE_CTL */ -+#define IEEE80211_FC0_SUBTYPE_PS_POLL 0xa0 -+#define IEEE80211_FC0_SUBTYPE_RTS 0xb0 -+#define IEEE80211_FC0_SUBTYPE_CTS 0xc0 -+#define IEEE80211_FC0_SUBTYPE_ACK 0xd0 -+#define IEEE80211_FC0_SUBTYPE_CF_END 0xe0 -+#define IEEE80211_FC0_SUBTYPE_CF_END_ACK 0xf0 -+/* for TYPE_DATA (bit combination) */ -+#define IEEE80211_FC0_SUBTYPE_DATA 0x00 -+#define IEEE80211_FC0_SUBTYPE_CF_ACK 0x10 -+#define IEEE80211_FC0_SUBTYPE_CF_POLL 0x20 -+#define IEEE80211_FC0_SUBTYPE_CF_ACPL 0x30 -+#define IEEE80211_FC0_SUBTYPE_NODATA 0x40 -+#define IEEE80211_FC0_SUBTYPE_CFACK 0x50 -+#define IEEE80211_FC0_SUBTYPE_CFPOLL 0x60 -+#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70 -+#define IEEE80211_FC0_SUBTYPE_QOS 0x80 -+#define IEEE80211_FC0_SUBTYPE_QOS_NULL 0xc0 -+ -+#define IEEE80211_FC1_DIR_MASK 0x03 -+#define IEEE80211_FC1_DIR_NODS 0x00 /* STA->STA */ -+#define IEEE80211_FC1_DIR_TODS 0x01 /* STA->AP */ -+#define IEEE80211_FC1_DIR_FROMDS 0x02 /* AP ->STA */ -+#define IEEE80211_FC1_DIR_DSTODS 0x03 /* AP ->AP */ -+ -+#define IEEE80211_FC1_MORE_FRAG 0x04 -+#define IEEE80211_FC1_RETRY 0x08 -+#define IEEE80211_FC1_PWR_MGT 0x10 -+#define IEEE80211_FC1_MORE_DATA 0x20 -+#define IEEE80211_FC1_WEP 0x40 -+#define IEEE80211_FC1_ORDER 0x80 -+ -+#define IEEE80211_SEQ_FRAG_MASK 0x000f -+#define IEEE80211_SEQ_FRAG_SHIFT 0 -+#define IEEE80211_SEQ_SEQ_MASK 0xfff0 -+#define IEEE80211_SEQ_SEQ_SHIFT 4 -+ -+#define IEEE80211_NWID_LEN 32 -+ -+/* -+ * 802.11 rate set. -+ */ -+#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */ -+#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */ -+ -+#define WMM_NUM_AC 4 /* 4 AC categories */ -+ -+#define WMM_PARAM_ACI_M 0x60 /* Mask for ACI field */ -+#define WMM_PARAM_ACI_S 5 /* Shift for ACI field */ -+#define WMM_PARAM_ACM_M 0x10 /* Mask for ACM bit */ -+#define WMM_PARAM_ACM_S 4 /* Shift for ACM bit */ -+#define WMM_PARAM_AIFSN_M 0x0f /* Mask for aifsn field */ -+#define WMM_PARAM_LOGCWMIN_M 0x0f /* Mask for CwMin field (in log) */ -+#define WMM_PARAM_LOGCWMAX_M 0xf0 /* Mask for CwMax field (in log) */ -+#define WMM_PARAM_LOGCWMAX_S 4 /* Shift for CwMax field */ -+ -+#define WMM_AC_TO_TID(_ac) ( \ -+ ((_ac) == WMM_AC_VO) ? 6 : \ -+ ((_ac) == WMM_AC_VI) ? 5 : \ -+ ((_ac) == WMM_AC_BK) ? 1 : \ -+ 0) -+ -+#define TID_TO_WMM_AC(_tid) ( \ -+ ((_tid) < 1) ? WMM_AC_BE : \ -+ ((_tid) < 3) ? WMM_AC_BK : \ -+ ((_tid) < 6) ? WMM_AC_VI : \ -+ WMM_AC_VO) -+/* -+ * Management information element payloads. -+ */ -+ -+enum { -+ IEEE80211_ELEMID_SSID = 0, -+ IEEE80211_ELEMID_RATES = 1, -+ IEEE80211_ELEMID_FHPARMS = 2, -+ IEEE80211_ELEMID_DSPARMS = 3, -+ IEEE80211_ELEMID_CFPARMS = 4, -+ IEEE80211_ELEMID_TIM = 5, -+ IEEE80211_ELEMID_IBSSPARMS = 6, -+ IEEE80211_ELEMID_COUNTRY = 7, -+ IEEE80211_ELEMID_CHALLENGE = 16, -+ /* 17-31 reserved for challenge text extension */ -+ IEEE80211_ELEMID_PWRCNSTR = 32, -+ IEEE80211_ELEMID_PWRCAP = 33, -+ IEEE80211_ELEMID_TPCREQ = 34, -+ IEEE80211_ELEMID_TPCREP = 35, -+ IEEE80211_ELEMID_SUPPCHAN = 36, -+ IEEE80211_ELEMID_CHANSWITCH = 37, -+ IEEE80211_ELEMID_MEASREQ = 38, -+ IEEE80211_ELEMID_MEASREP = 39, -+ IEEE80211_ELEMID_QUIET = 40, -+ IEEE80211_ELEMID_IBSSDFS = 41, -+ IEEE80211_ELEMID_ERP = 42, -+ IEEE80211_ELEMID_RSN = 48, -+ IEEE80211_ELEMID_XRATES = 50, -+ IEEE80211_ELEMID_TPC = 150, -+ IEEE80211_ELEMID_CCKM = 156, -+ IEEE80211_ELEMID_VENDOR = 221, /* vendor private */ -+}; -+ -+#define ATH_OUI 0x7f0300 /* Atheros OUI */ -+#define ATH_OUI_TYPE 0x01 -+#define ATH_OUI_SUBTYPE 0x01 -+#define ATH_OUI_VERSION 0x00 -+ -+#define WPA_OUI 0xf25000 -+#define WPA_OUI_TYPE 0x01 -+#define WPA_VERSION 1 /* current supported version */ -+ -+#define WPA_CSE_NULL 0x00 -+#define WPA_CSE_WEP40 0x01 -+#define WPA_CSE_TKIP 0x02 -+#define WPA_CSE_CCMP 0x04 -+#define WPA_CSE_WEP104 0x05 -+ -+#define WPA_ASE_NONE 0x00 -+#define WPA_ASE_8021X_UNSPEC 0x01 -+#define WPA_ASE_8021X_PSK 0x02 -+ -+#define RSN_OUI 0xac0f00 -+#define RSN_VERSION 1 /* current supported version */ -+ -+#define RSN_CSE_NULL 0x00 -+#define RSN_CSE_WEP40 0x01 -+#define RSN_CSE_TKIP 0x02 -+#define RSN_CSE_WRAP 0x03 -+#define RSN_CSE_CCMP 0x04 -+#define RSN_CSE_WEP104 0x05 -+ -+#define RSN_ASE_NONE 0x00 -+#define RSN_ASE_8021X_UNSPEC 0x01 -+#define RSN_ASE_8021X_PSK 0x02 -+ -+#define RSN_CAP_PREAUTH 0x01 -+ -+#define WMM_OUI 0xf25000 -+#define WMM_OUI_TYPE 0x02 -+#define WMM_INFO_OUI_SUBTYPE 0x00 -+#define WMM_PARAM_OUI_SUBTYPE 0x01 -+#define WMM_VERSION 1 -+ -+/* WMM stream classes */ -+#define WMM_NUM_AC 4 -+#define WMM_AC_BE 0 /* best effort */ -+#define WMM_AC_BK 1 /* background */ -+#define WMM_AC_VI 2 /* video */ -+#define WMM_AC_VO 3 /* voice */ -+ -+/* TSPEC related */ -+#define ACTION_CATEGORY_CODE_TSPEC 17 -+#define ACTION_CODE_TSPEC_ADDTS 0 -+#define ACTION_CODE_TSPEC_ADDTS_RESP 1 -+#define ACTION_CODE_TSPEC_DELTS 2 -+ -+typedef enum { -+ TSPEC_STATUS_CODE_ADMISSION_ACCEPTED = 0, -+ TSPEC_STATUS_CODE_ADDTS_INVALID_PARAMS = 0x1, -+ TSPEC_STATUS_CODE_ADDTS_REQUEST_REFUSED = 0x3, -+ TSPEC_STATUS_CODE_UNSPECIFIED_QOS_RELATED_FAILURE = 0xC8, -+ TSPEC_STATUS_CODE_REQUESTED_REFUSED_POLICY_CONFIGURATION = 0xC9, -+ TSPEC_STATUS_CODE_INSUFFCIENT_BANDWIDTH = 0xCA, -+ TSPEC_STATUS_CODE_INVALID_PARAMS = 0xCB, -+ TSPEC_STATUS_CODE_DELTS_SENT = 0x30, -+ TSPEC_STATUS_CODE_DELTS_RECV = 0x31, -+} TSPEC_STATUS_CODE; -+ -+/* -+ * WMM/802.11e Tspec Element -+ */ -+typedef PREPACK struct wmm_tspec_ie_t { -+ A_UINT8 elementId; -+ A_UINT8 len; -+ A_UINT8 oui[3]; -+ A_UINT8 ouiType; -+ A_UINT8 ouiSubType; -+ A_UINT8 version; -+ A_UINT16 tsInfo_info; -+ A_UINT8 tsInfo_reserved; -+ A_UINT16 nominalMSDU; -+ A_UINT16 maxMSDU; -+ A_UINT32 minServiceInt; -+ A_UINT32 maxServiceInt; -+ A_UINT32 inactivityInt; -+ A_UINT32 suspensionInt; -+ A_UINT32 serviceStartTime; -+ A_UINT32 minDataRate; -+ A_UINT32 meanDataRate; -+ A_UINT32 peakDataRate; -+ A_UINT32 maxBurstSize; -+ A_UINT32 delayBound; -+ A_UINT32 minPhyRate; -+ A_UINT16 sba; -+ A_UINT16 mediumTime; -+} POSTPACK WMM_TSPEC_IE; -+ -+ -+/* -+ * BEACON management packets -+ * -+ * octet timestamp[8] -+ * octet beacon interval[2] -+ * octet capability information[2] -+ * information element -+ * octet elemid -+ * octet length -+ * octet information[length] -+ */ -+ -+#define IEEE80211_BEACON_INTERVAL(beacon) \ -+ ((beacon)[8] | ((beacon)[9] << 8)) -+#define IEEE80211_BEACON_CAPABILITY(beacon) \ -+ ((beacon)[10] | ((beacon)[11] << 8)) -+ -+#define IEEE80211_CAPINFO_ESS 0x0001 -+#define IEEE80211_CAPINFO_IBSS 0x0002 -+#define IEEE80211_CAPINFO_CF_POLLABLE 0x0004 -+#define IEEE80211_CAPINFO_CF_POLLREQ 0x0008 -+#define IEEE80211_CAPINFO_PRIVACY 0x0010 -+#define IEEE80211_CAPINFO_SHORT_PREAMBLE 0x0020 -+#define IEEE80211_CAPINFO_PBCC 0x0040 -+#define IEEE80211_CAPINFO_CHNL_AGILITY 0x0080 -+/* bits 8-9 are reserved */ -+#define IEEE80211_CAPINFO_SHORT_SLOTTIME 0x0400 -+#define IEEE80211_CAPINFO_APSD 0x0800 -+/* bit 12 is reserved */ -+#define IEEE80211_CAPINFO_DSSSOFDM 0x2000 -+/* bits 14-15 are reserved */ -+ -+/* -+ * Authentication Modes -+ */ -+ -+enum ieee80211_authmode { -+ IEEE80211_AUTH_NONE = 0, -+ IEEE80211_AUTH_OPEN = 1, -+ IEEE80211_AUTH_SHARED = 2, -+ IEEE80211_AUTH_8021X = 3, -+ IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ -+ /* NB: these are used only for ioctls */ -+ IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x */ -+ IEEE80211_AUTH_WPA_PSK = 6, /* WPA/RSN w/ PSK */ -+ IEEE80211_AUTH_WPA_CCKM = 7, /* WPA/RSN IE w/ CCKM */ -+}; -+ -+#include "athendpack.h" -+ -+#endif /* _NET80211_IEEE80211_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ieee80211_ioctl.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ieee80211_ioctl.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,163 @@ -+/* -+ * Copyright (c) 2004-2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/ieee80211_ioctl.h#1 $ -+ */ -+ -+#ifndef _IEEE80211_IOCTL_H_ -+#define _IEEE80211_IOCTL_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* -+ * Extracted from the MADWIFI net80211/ieee80211_ioctl.h -+ */ -+ -+/* -+ * WPA/RSN get/set key request. Specify the key/cipher -+ * type and whether the key is to be used for sending and/or -+ * receiving. The key index should be set only when working -+ * with global keys (use IEEE80211_KEYIX_NONE for ``no index''). -+ * Otherwise a unicast/pairwise key is specified by the bssid -+ * (on a station) or mac address (on an ap). They key length -+ * must include any MIC key data; otherwise it should be no -+ more than IEEE80211_KEYBUF_SIZE. -+ */ -+struct ieee80211req_key { -+ u_int8_t ik_type; /* key/cipher type */ -+ u_int8_t ik_pad; -+ u_int16_t ik_keyix; /* key index */ -+ u_int8_t ik_keylen; /* key length in bytes */ -+ u_int8_t ik_flags; -+#define IEEE80211_KEY_XMIT 0x01 -+#define IEEE80211_KEY_RECV 0x02 -+#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */ -+ u_int8_t ik_macaddr[IEEE80211_ADDR_LEN]; -+ u_int64_t ik_keyrsc; /* key receive sequence counter */ -+ u_int64_t ik_keytsc; /* key transmit sequence counter */ -+ u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; -+}; -+/* -+ * Delete a key either by index or address. Set the index -+ * to IEEE80211_KEYIX_NONE when deleting a unicast key. -+ */ -+struct ieee80211req_del_key { -+ u_int8_t idk_keyix; /* key index */ -+ u_int8_t idk_macaddr[IEEE80211_ADDR_LEN]; -+}; -+/* -+ * MLME state manipulation request. IEEE80211_MLME_ASSOC -+ * only makes sense when operating as a station. The other -+ * requests can be used when operating as a station or an -+ * ap (to effect a station). -+ */ -+struct ieee80211req_mlme { -+ u_int8_t im_op; /* operation to perform */ -+#define IEEE80211_MLME_ASSOC 1 /* associate station */ -+#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */ -+#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */ -+#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */ -+#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */ -+ u_int16_t im_reason; /* 802.11 reason code */ -+ u_int8_t im_macaddr[IEEE80211_ADDR_LEN]; -+}; -+ -+struct ieee80211req_addpmkid { -+ u_int8_t pi_bssid[IEEE80211_ADDR_LEN]; -+ u_int8_t pi_enable; -+ u_int8_t pi_pmkid[16]; -+}; -+ -+#define AUTH_ALG_OPEN_SYSTEM 0x01 -+#define AUTH_ALG_SHARED_KEY 0x02 -+#define AUTH_ALG_LEAP 0x04 -+ -+struct ieee80211req_authalg { -+ u_int8_t auth_alg; -+}; -+ -+/* -+ * Request to add an IE to a Management Frame -+ */ -+enum{ -+ IEEE80211_APPIE_FRAME_BEACON = 0, -+ IEEE80211_APPIE_FRAME_PROBE_REQ = 1, -+ IEEE80211_APPIE_FRAME_PROBE_RESP = 2, -+ IEEE80211_APPIE_FRAME_ASSOC_REQ = 3, -+ IEEE80211_APPIE_FRAME_ASSOC_RESP = 4, -+ IEEE80211_APPIE_NUM_OF_FRAME = 5 -+}; -+ -+/* -+ * The Maximum length of the IE that can be added to a Management frame -+ */ -+#define IEEE80211_APPIE_FRAME_MAX_LEN 78 -+ -+struct ieee80211req_getset_appiebuf { -+ u_int32_t app_frmtype; /* management frame type for which buffer is added */ -+ u_int32_t app_buflen; /*application supplied buffer length */ -+ u_int8_t app_buf[]; -+}; -+ -+/* -+ * The following definitions are used by an application to set filter -+ * for receiving management frames -+ */ -+enum { -+ IEEE80211_FILTER_TYPE_BEACON = 0x1, -+ IEEE80211_FILTER_TYPE_PROBE_REQ = 0x2, -+ IEEE80211_FILTER_TYPE_PROBE_RESP = 0x4, -+ IEEE80211_FILTER_TYPE_ASSOC_REQ = 0x8, -+ IEEE80211_FILTER_TYPE_ASSOC_RESP = 0x10, -+ IEEE80211_FILTER_TYPE_AUTH = 0x20, -+ IEEE80211_FILTER_TYPE_DEAUTH = 0x40, -+ IEEE80211_FILTER_TYPE_DISASSOC = 0x80, -+ IEEE80211_FILTER_TYPE_ALL = 0xFF /* used to check the valid filter bits */ -+}; -+ -+struct ieee80211req_set_filter { -+ u_int32_t app_filterype; /* management frame filter type */ -+}; -+ -+enum { -+ IEEE80211_PARAM_AUTHMODE = 3, /* Authentication Mode */ -+ IEEE80211_PARAM_MCASTCIPHER = 5, -+ IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */ -+ IEEE80211_PARAM_UCASTCIPHER = 8, -+ IEEE80211_PARAM_UCASTKEYLEN = 9, /* unicast key length */ -+ IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */ -+ IEEE80211_PARAM_ROAMING = 12, /* roaming mode */ -+ IEEE80211_PARAM_PRIVACY = 13, /* privacy invoked */ -+ IEEE80211_PARAM_COUNTERMEASURES = 14, /* WPA/TKIP countermeasures */ -+ IEEE80211_PARAM_DROPUNENCRYPTED = 15, /* discard unencrypted frames */ -+}; -+ -+/* -+ * Values for IEEE80211_PARAM_WPA -+ */ -+#define WPA_MODE_WPA1 1 -+#define WPA_MODE_WPA2 2 -+#define WPA_MODE_AUTO 3 -+#define WPA_MODE_NONE 4 -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _IEEE80211_IOCTL_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ieee80211_node.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ieee80211_node.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,77 @@ -+/*- -+ * Copyright (c) 2001 Atsushi Onoe -+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting -+ * Copyright (c) 2006 Atheros Communications, Inc. -+ * -+ * Wireless Network driver for Atheros AR6001 -+ * All rights reserved. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ */ -+#ifndef _IEEE80211_NODE_H_ -+#define _IEEE80211_NODE_H_ -+ -+/* -+ * Node locking definitions. -+ */ -+#define IEEE80211_NODE_LOCK_INIT(_nt) A_MUTEX_INIT(&(_nt)->nt_nodelock) -+#define IEEE80211_NODE_LOCK_DESTROY(_nt) -+#define IEEE80211_NODE_LOCK(_nt) A_MUTEX_LOCK(&(_nt)->nt_nodelock) -+#define IEEE80211_NODE_UNLOCK(_nt) A_MUTEX_UNLOCK(&(_nt)->nt_nodelock) -+#define IEEE80211_NODE_LOCK_BH(_nt) A_MUTEX_LOCK(&(_nt)->nt_nodelock) -+#define IEEE80211_NODE_UNLOCK_BH(_nt) A_MUTEX_UNLOCK(&(_nt)->nt_nodelock) -+#define IEEE80211_NODE_LOCK_ASSERT(_nt) -+ -+/* -+ * Node reference counting definitions. -+ * -+ * ieee80211_node_initref initialize the reference count to 1 -+ * ieee80211_node_incref add a reference -+ * ieee80211_node_decref remove a reference -+ * ieee80211_node_dectestref remove a reference and return 1 if this -+ * is the last reference, otherwise 0 -+ * ieee80211_node_refcnt reference count for printing (only) -+ */ -+#define ieee80211_node_initref(_ni) ((_ni)->ni_refcnt = 1) -+#define ieee80211_node_incref(_ni) ((_ni)->ni_refcnt++) -+#define ieee80211_node_decref(_ni) ((_ni)->ni_refcnt--) -+#define ieee80211_node_dectestref(_ni) (((_ni)->ni_refcnt--) == 0) -+#define ieee80211_node_refcnt(_ni) ((_ni)->ni_refcnt) -+ -+#define IEEE80211_NODE_HASHSIZE 32 -+/* simple hash is enough for variation of macaddr */ -+#define IEEE80211_NODE_HASH(addr) \ -+ (((const A_UINT8 *)(addr))[IEEE80211_ADDR_LEN - 1] % \ -+ IEEE80211_NODE_HASHSIZE) -+ -+/* -+ * Table of ieee80211_node instances. Each ieee80211com -+ * has at least one for holding the scan candidates. -+ * When operating as an access point or in ibss mode there -+ * is a second table for associated stations or neighbors. -+ */ -+struct ieee80211_node_table { -+ void *nt_wmip; /* back reference */ -+ A_MUTEX_T nt_nodelock; /* on node table */ -+ struct bss *nt_node_first; /* information of all nodes */ -+ struct bss *nt_node_last; /* information of all nodes */ -+ struct bss *nt_hash[IEEE80211_NODE_HASHSIZE]; -+ const char *nt_name; /* for debugging */ -+ A_UINT32 nt_scangen; /* gen# for timeout scan */ -+ A_TIMER nt_inact_timer; -+ A_UINT8 isTimerArmed; /* is the node timer armed */ -+}; -+ -+#define WLAN_NODE_INACT_TIMEOUT_MSEC 10000 -+ -+#endif /* _IEEE80211_NODE_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ini_dset.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/ini_dset.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,40 @@ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+#ifndef _INI_DSET_H_ -+#define _INI_DSET_H_ -+ -+/* -+ * Each of these represents a WHAL INI table, which consists -+ * of an "address column" followed by 1 or more "value columns". -+ * -+ * Software uses the base WHAL_INI_DATA_ID+column to access a -+ * DataSet that holds a particular column of data. -+ */ -+typedef enum { -+ WHAL_INI_DATA_ID_NULL =0, -+ WHAL_INI_DATA_ID_MODE_SPECIFIC =1, /* 2,3 */ -+ WHAL_INI_DATA_ID_COMMON =4, /* 5 */ -+ WHAL_INI_DATA_ID_BB_RFGAIN =6, /* 7,8 */ -+ WHAL_INI_DATA_ID_ANALOG_BANK1 =9, /* 10 */ -+ WHAL_INI_DATA_ID_ANALOG_BANK2 =11, /* 12 */ -+ WHAL_INI_DATA_ID_ANALOG_BANK3 =13, /* 14, 15 */ -+ WHAL_INI_DATA_ID_ANALOG_BANK6 =16, /* 17, 18 */ -+ WHAL_INI_DATA_ID_ANALOG_BANK7 =19, /* 20 */ -+ WHAL_INI_DATA_ID_MODE_OVERRIDES =21, /* 22,23 */ -+ WHAL_INI_DATA_ID_COMMON_OVERRIDES =24, /* 25 */ -+ -+ WHAL_INI_DATA_ID_MAX =25 -+} WHAL_INI_DATA_ID; -+ -+typedef PREPACK struct { -+ A_UINT16 freqIndex; // 1 - A mode 2 - B or G mode 0 - common -+ A_UINT16 offset; -+ A_UINT32 newValue; -+} POSTPACK INI_DSET_REG_OVERRIDE; -+ -+#endif -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/regDb.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/regDb.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,19 @@ -+/* -+ * Copyright (c) 2005 Atheros Communications, Inc. -+ * All rights reserved. -+ * -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ * This module contains the header files for regulatory module, -+ * which include the DB schema and DB values. -+ * $Id: -+ */ -+ -+#ifndef __REG_DB_H__ -+#define __REG_DB_H__ -+ -+#include "./regulatory/reg_dbschema.h" -+#include "./regulatory/reg_dbvalues.h" -+ -+#endif /* __REG_DB_H__ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/regdump.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/regdump.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,33 @@ -+#ifndef __REGDUMP_H__ -+#define __REGDUMP_H__ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+#if defined(AR6001) -+#include "AR6001/AR6001_regdump.h" -+#endif -+#if defined(AR6002) -+#include "AR6002/AR6002_regdump.h" -+#endif -+ -+#if !defined(__ASSEMBLER__) -+/* -+ * Target CPU state at the time of failure is reflected -+ * in a register dump, which the Host can fetch through -+ * the diagnostic window. -+ */ -+struct register_dump_s { -+ A_UINT32 target_id; /* Target ID */ -+ A_UINT32 assline; /* Line number (if assertion failure) */ -+ A_UINT32 pc; /* Program Counter at time of exception */ -+ A_UINT32 badvaddr; /* Virtual address causing exception */ -+ CPU_exception_frame_t exc_frame; /* CPU-specific exception info */ -+ -+ /* Could copy top of stack here, too.... */ -+}; -+#endif /* __ASSEMBLER__ */ -+#endif /* __REGDUMP_H__ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/targaddrs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/targaddrs.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,158 @@ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+ -+#ifndef __TARGADDRS_H__ -+#define __TARGADDRS_H__ -+#if defined(AR6001) -+#include "AR6001/addrs.h" -+#endif -+#if defined(AR6002) -+#include "AR6002/addrs.h" -+#endif -+ -+/* -+ * AR6K option bits, to enable/disable various features. -+ * By default, all option bits are 0. -+ * These bits can be set in LOCAL_SCRATCH register 0. -+ */ -+#define AR6K_OPTION_BMI_DISABLE 0x01 /* Disable BMI comm with Host */ -+#define AR6K_OPTION_SERIAL_ENABLE 0x02 /* Enable serial port msgs */ -+#define AR6K_OPTION_WDT_DISABLE 0x04 /* WatchDog Timer override */ -+#define AR6K_OPTION_SLEEP_DISABLE 0x08 /* Disable system sleep */ -+#define AR6K_OPTION_STOP_BOOT 0x10 /* Stop boot processes (for ATE) */ -+#define AR6K_OPTION_ENABLE_NOANI 0x20 /* Operate without ANI */ -+#define AR6K_OPTION_DSET_DISABLE 0x40 /* Ignore DataSets */ -+#define AR6K_OPTION_IGNORE_FLASH 0x80 /* Ignore flash during bootup */ -+ -+/* -+ * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the -+ * host_interest structure. It must match the address of the _host_interest -+ * symbol (see linker script). -+ * -+ * Host Interest is shared between Host and Target in order to coordinate -+ * between the two, and is intended to remain constant (with additions only -+ * at the end) across software releases. -+ */ -+#define AR6001_HOST_INTEREST_ADDRESS 0x80000600 -+#define AR6002_HOST_INTEREST_ADDRESS 0x00500400 -+ -+#define HOST_INTEREST_MAX_SIZE 0x100 -+ -+#if !defined(__ASSEMBLER__) -+struct register_dump_s; -+struct dbglog_hdr_s; -+ -+/* -+ * These are items that the Host may need to access -+ * via BMI or via the Diagnostic Window. The position -+ * of items in this structure must remain constant -+ * across firmware revisions! -+ * -+ * Types for each item must be fixed size across -+ * target and host platforms. -+ * -+ * More items may be added at the end. -+ */ -+struct host_interest_s { -+ /* -+ * Pointer to application-defined area, if any. -+ * Set by Target application during startup. -+ */ -+ A_UINT32 hi_app_host_interest; /* 0x00 */ -+ -+ /* Pointer to register dump area, valid after Target crash. */ -+ A_UINT32 hi_failure_state; /* 0x04 */ -+ -+ /* Pointer to debug logging header */ -+ A_UINT32 hi_dbglog_hdr; /* 0x08 */ -+ -+ /* Indicates whether or not flash is present on Target. -+ * NB: flash_is_present indicator is here not just -+ * because it might be of interest to the Host; but -+ * also because it's set early on by Target's startup -+ * asm code and we need it to have a special RAM address -+ * so that it doesn't get reinitialized with the rest -+ * of data. -+ */ -+ A_UINT32 hi_flash_is_present; /* 0x0c */ -+ -+ /* -+ * General-purpose flag bits, similar to AR6000_OPTION_* flags. -+ * Can be used by application rather than by OS. -+ */ -+ A_UINT32 hi_option_flag; /* 0x10 */ -+ -+ /* -+ * Boolean that determines whether or not to -+ * display messages on the serial port. -+ */ -+ A_UINT32 hi_serial_enable; /* 0x14 */ -+ -+ /* Start address of Flash DataSet index, if any */ -+ A_UINT32 hi_dset_list_head; /* 0x18 */ -+ -+ /* Override Target application start address */ -+ A_UINT32 hi_app_start; /* 0x1c */ -+ -+ /* Clock and voltage tuning */ -+ A_UINT32 hi_skip_clock_init; /* 0x20 */ -+ A_UINT32 hi_core_clock_setting; /* 0x24 */ -+ A_UINT32 hi_cpu_clock_setting; /* 0x28 */ -+ A_UINT32 hi_system_sleep_setting; /* 0x2c */ -+ A_UINT32 hi_xtal_control_setting; /* 0x30 */ -+ A_UINT32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ -+ A_UINT32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ -+ A_UINT32 hi_ref_voltage_trim_setting; /* 0x3c */ -+ A_UINT32 hi_clock_info; /* 0x40 */ -+ -+ /* -+ * Flash configuration overrides, used only -+ * when firmware is not executing from flash. -+ * (When using flash, modify the global variables -+ * with equivalent names.) -+ */ -+ A_UINT32 hi_bank0_addr_value; /* 0x44 */ -+ A_UINT32 hi_bank0_read_value; /* 0x48 */ -+ A_UINT32 hi_bank0_write_value; /* 0x4c */ -+ A_UINT32 hi_bank0_config_value; /* 0x50 */ -+ -+ /* Pointer to Board Data */ -+ A_UINT32 hi_board_data; /* 0x54 */ -+ A_UINT32 hi_board_data_initialized; /* 0x58 */ -+ -+ A_UINT32 hi_dset_RAM_index_table; /* 0x5c */ -+ -+ A_UINT32 hi_desired_baud_rate; /* 0x60 */ -+ A_UINT32 hi_dbglog_config; /* 0x64 */ -+ A_UINT32 hi_end_RAM_reserve_sz; /* 0x68 */ -+ A_UINT32 hi_mbox_io_block_sz; /* 0x6c */ -+ -+ A_UINT32 hi_num_bpatch_streams; /* 0x70 */ -+ A_UINT32 hi_mbox_isr_yield_limit; /* 0x74 */ -+ -+ A_UINT32 hi_refclk_hz; /* 0x78 */ -+}; -+ -+/* Bits defined in hi_option_flag */ -+#define HI_OPTION_TIMER_WAR 1 /* not really used */ -+ -+/* -+ * Intended for use by Host software, this macro returns the Target RAM -+ * address of any item in the host_interest structure. -+ * Example: target_addr = AR6001_HOST_INTEREST_ITEM_ADDRESS(hi_board_data); -+ */ -+#define AR6001_HOST_INTEREST_ITEM_ADDRESS(item) \ -+ ((A_UINT32)&((((struct host_interest_s *)(AR6001_HOST_INTEREST_ADDRESS))->item))) -+ -+#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \ -+ ((A_UINT32)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item))) -+ -+ -+#endif /* !__ASSEMBLER__ */ -+ -+#endif /* __TARGADDRS_H__ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/testcmd.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/testcmd.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,144 @@ -+/* -+ * Copyright (c) 2004-2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+ -+#ifndef TESTCMD_H_ -+#define TESTCMD_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+typedef enum { -+ ZEROES_PATTERN = 0, -+ ONES_PATTERN, -+ REPEATING_10, -+ PN7_PATTERN, -+ PN9_PATTERN, -+ PN15_PATTERN -+}TX_DATA_PATTERN; -+ -+/* Continous tx -+ mode : TCMD_CONT_TX_OFF - Disabling continous tx -+ TCMD_CONT_TX_SINE - Enable continuous unmodulated tx -+ TCMD_CONT_TX_FRAME- Enable continuous modulated tx -+ freq : Channel freq in Mhz. (e.g 2412 for channel 1 in 11 g) -+dataRate: 0 - 1 Mbps -+ 1 - 2 Mbps -+ 2 - 5.5 Mbps -+ 3 - 11 Mbps -+ 4 - 6 Mbps -+ 5 - 9 Mbps -+ 6 - 12 Mbps -+ 7 - 18 Mbps -+ 8 - 24 Mbps -+ 9 - 36 Mbps -+ 10 - 28 Mbps -+ 11 - 54 Mbps -+ txPwr: Tx power in dBm[5 -11] for unmod Tx, [5-14] for mod Tx -+antenna: 1 - one antenna -+ 2 - two antenna -+Note : Enable/disable continuous tx test cmd works only when target is awake. -+*/ -+ -+typedef enum { -+ TCMD_CONT_TX_OFF = 0, -+ TCMD_CONT_TX_SINE, -+ TCMD_CONT_TX_FRAME, -+ TCMD_CONT_TX_TX99, -+ TCMD_CONT_TX_TX100 -+} TCMD_CONT_TX_MODE; -+ -+typedef PREPACK struct { -+ A_UINT32 testCmdId; -+ A_UINT32 mode; -+ A_UINT32 freq; -+ A_UINT32 dataRate; -+ A_INT32 txPwr; -+ A_UINT32 antenna; -+ A_UINT32 enANI; -+ A_UINT32 scramblerOff; -+ A_UINT32 aifsn; -+ A_UINT16 pktSz; -+ A_UINT16 txPattern; -+} POSTPACK TCMD_CONT_TX; -+ -+#define TCMD_TXPATTERN_ZERONE 0x1 -+#define TCMD_TXPATTERN_ZERONE_DIS_SCRAMBLE 0x2 -+ -+/* Continuous Rx -+ act: TCMD_CONT_RX_PROMIS - promiscuous mode (accept all incoming frames) -+ TCMD_CONT_RX_FILTER - filter mode (accept only frames with dest -+ address equal specified -+ mac address (set via act =3) -+ TCMD_CONT_RX_REPORT off mode (disable cont rx mode and get the -+ report from the last cont -+ Rx test) -+ -+ TCMD_CONT_RX_SETMAC - set MacAddr mode (sets the MAC address for the -+ target. This Overrides -+ the default MAC address.) -+ -+*/ -+typedef enum { -+ TCMD_CONT_RX_PROMIS =0, -+ TCMD_CONT_RX_FILTER, -+ TCMD_CONT_RX_REPORT, -+ TCMD_CONT_RX_SETMAC -+} TCMD_CONT_RX_ACT; -+ -+typedef PREPACK struct { -+ A_UINT32 testCmdId; -+ A_UINT32 act; -+ A_UINT32 enANI; -+ PREPACK union { -+ struct PREPACK TCMD_CONT_RX_PARA { -+ A_UINT32 freq; -+ A_UINT32 antenna; -+ } POSTPACK para; -+ struct PREPACK TCMD_CONT_RX_REPORT { -+ A_UINT32 totalPkt; -+ A_INT32 rssiInDBm; -+ } POSTPACK report; -+ struct PREPACK TCMD_CONT_RX_MAC { -+ A_UCHAR addr[ATH_MAC_LEN]; -+ } POSTPACK mac; -+ } POSTPACK u; -+} POSTPACK TCMD_CONT_RX; -+ -+/* Force sleep/wake test cmd -+ mode: TCMD_PM_WAKEUP - Wakeup the target -+ TCMD_PM_SLEEP - Force the target to sleep. -+ */ -+typedef enum { -+ TCMD_PM_WAKEUP = 1, /* be consistent with target */ -+ TCMD_PM_SLEEP -+} TCMD_PM_MODE; -+ -+typedef PREPACK struct { -+ A_UINT32 testCmdId; -+ A_UINT32 mode; -+} POSTPACK TCMD_PM; -+ -+typedef enum{ -+ TCMD_CONT_TX_ID, -+ TCMD_CONT_RX_ID, -+ TCMD_PM_ID -+ } TCMD_ID; -+ -+typedef PREPACK union { -+ TCMD_CONT_TX contTx; -+ TCMD_CONT_RX contRx; -+ TCMD_PM pm ; -+} POSTPACK TEST_CMD; -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* TESTCMD_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wlan_api.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wlan_api.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,101 @@ -+#ifndef _HOST_WLAN_API_H_ -+#define _HOST_WLAN_API_H_ -+/* -+ * Copyright (c) 2004-2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * This file contains the API for the host wlan module -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wlan_api.h#1 $ -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+struct ieee80211_node_table; -+struct ieee80211_frame; -+ -+struct ieee80211_common_ie { -+ A_UINT16 ie_chan; -+ A_UINT8 *ie_tstamp; -+ A_UINT8 *ie_ssid; -+ A_UINT8 *ie_rates; -+ A_UINT8 *ie_xrates; -+ A_UINT8 *ie_country; -+ A_UINT8 *ie_wpa; -+ A_UINT8 *ie_rsn; -+ A_UINT8 *ie_wmm; -+ A_UINT8 *ie_ath; -+ A_UINT16 ie_capInfo; -+ A_UINT16 ie_beaconInt; -+ A_UINT8 *ie_tim; -+ A_UINT8 *ie_chswitch; -+ A_UINT8 ie_erp; -+ A_UINT8 *ie_wsc; -+}; -+ -+typedef struct bss { -+ A_UINT8 ni_macaddr[6]; -+ A_UINT8 ni_snr; -+ A_INT16 ni_rssi; -+ struct bss *ni_list_next; -+ struct bss *ni_list_prev; -+ struct bss *ni_hash_next; -+ struct bss *ni_hash_prev; -+ struct ieee80211_common_ie ni_cie; -+ A_UINT8 *ni_buf; -+ struct ieee80211_node_table *ni_table; -+ A_UINT32 ni_refcnt; -+ int ni_scangen; -+ A_UINT32 ni_tstamp; -+} bss_t; -+ -+typedef void wlan_node_iter_func(void *arg, bss_t *); -+ -+bss_t *wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size); -+void wlan_node_free(bss_t *ni); -+void wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni, -+ const A_UINT8 *macaddr); -+bss_t *wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr); -+void wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni); -+void wlan_free_allnodes(struct ieee80211_node_table *nt); -+void wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f, -+ void *arg); -+ -+void wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt); -+void wlan_node_table_reset(struct ieee80211_node_table *nt); -+void wlan_node_table_cleanup(struct ieee80211_node_table *nt); -+ -+A_STATUS wlan_parse_beacon(A_UINT8 *buf, int framelen, -+ struct ieee80211_common_ie *cie); -+ -+A_UINT16 wlan_ieee2freq(int chan); -+A_UINT32 wlan_freq2ieee(A_UINT16 freq); -+ -+ -+bss_t * -+wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid, -+ A_UINT32 ssidLength, A_BOOL bIsWPA2); -+ -+void -+wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _HOST_WLAN_API_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wlan_dset.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wlan_dset.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,20 @@ -+/* -+ * Copyright (c) 2007 Atheros Communications, Inc. -+ * All rights reserved. -+ * -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ */ -+ -+#ifndef __WLAN_DSET_H__ -+#define __WKAN_DSET_H__ -+ -+typedef PREPACK struct wow_config_dset { -+ -+ A_UINT8 valid_dset; -+ A_UINT8 gpio_enable; -+ A_UINT16 gpio_pin; -+} POSTPACK WOW_CONFIG_DSET; -+ -+#endif -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wmi_api.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wmi_api.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,260 @@ -+#ifndef _WMI_API_H_ -+#define _WMI_API_H_ -+/* -+ * Copyright (c) 2004-2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * This file contains the definitions for the Wireless Module Interface (WMI). -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wmi_api.h#2 $ -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* -+ * IP QoS Field definitions according to 802.1p -+ */ -+#define BEST_EFFORT_PRI 0 -+#define BACKGROUND_PRI 1 -+#define EXCELLENT_EFFORT_PRI 3 -+#define CONTROLLED_LOAD_PRI 4 -+#define VIDEO_PRI 5 -+#define VOICE_PRI 6 -+#define NETWORK_CONTROL_PRI 7 -+#define MAX_NUM_PRI 8 -+ -+#define UNDEFINED_PRI (0xff) -+ -+/* simple mapping of IP TOS field to a WMI priority stream -+ * this mapping was taken from the original linux driver implementation -+ * The operation maps the following -+ * -+ * */ -+#define IP_TOS_TO_WMI_PRI(tos) \ -+ ((WMI_PRI_STREAM_ID)(((tos) >> 1) & 0x03)) -+ -+#define WMI_IMPLICIT_PSTREAM_INACTIVITY_INT 5000 /* 5 seconds */ -+ -+ -+struct wmi_t; -+ -+void *wmi_init(void *devt); -+ -+void wmi_qos_state_init(struct wmi_t *wmip); -+void wmi_shutdown(struct wmi_t *wmip); -+A_UINT16 wmi_get_mapped_qos_queue(struct wmi_t *, A_UINT8); -+A_STATUS wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf); -+A_STATUS wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType); -+A_STATUS wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf); -+A_STATUS wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf); -+A_STATUS wmi_syncpoint(struct wmi_t *wmip); -+A_STATUS wmi_syncpoint_reset(struct wmi_t *wmip); -+WMI_PRI_STREAM_ID wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass); -+A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up); -+ -+A_STATUS wmi_control_rx(struct wmi_t *wmip, void *osbuf); -+void wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg); -+void wmi_free_allnodes(struct wmi_t *wmip); -+bss_t *wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr); -+ -+ -+typedef enum { -+ NO_SYNC_WMIFLAG = 0, -+ SYNC_BEFORE_WMIFLAG, /* transmit all queued data before cmd */ -+ SYNC_AFTER_WMIFLAG, /* any new data waits until cmd execs */ -+ SYNC_BOTH_WMIFLAG, -+ END_WMIFLAG /* end marker */ -+} WMI_SYNC_FLAG; -+ -+A_STATUS wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId, -+ WMI_SYNC_FLAG flag); -+A_STATUS wmi_connect_cmd(struct wmi_t *wmip, -+ NETWORK_TYPE netType, -+ DOT11_AUTH_MODE dot11AuthMode, -+ AUTH_MODE authMode, -+ CRYPTO_TYPE pairwiseCrypto, -+ A_UINT8 pairwiseCryptoLen, -+ CRYPTO_TYPE groupCrypto, -+ A_UINT8 groupCryptoLen, -+ int ssidLength, -+ A_UCHAR *ssid, -+ A_UINT8 *bssid, -+ A_UINT16 channel, -+ A_UINT32 ctrl_flags); -+A_STATUS wmi_reconnect_cmd(struct wmi_t *wmip, -+ A_UINT8 *bssid, -+ A_UINT16 channel); -+A_STATUS wmi_disconnect_cmd(struct wmi_t *wmip); -+A_STATUS wmi_getrev_cmd(struct wmi_t *wmip); -+A_STATUS wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType, -+ A_BOOL forceFgScan, A_BOOL isLegacy, -+ A_UINT32 homeDwellTime, A_UINT32 forceScanInterval); -+A_STATUS wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec, -+ A_UINT16 fg_end_sec, A_UINT16 bg_sec, -+ A_UINT16 minact_chdw_msec, -+ A_UINT16 maxact_chdw_msec, A_UINT16 pas_chdw_msec, -+ A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags, -+ A_UINT32 max_dfsch_act_time); -+A_STATUS wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask); -+A_STATUS wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag, -+ A_UINT8 ssidLength, A_UCHAR *ssid); -+A_STATUS wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons); -+A_STATUS wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmisstime, A_UINT16 bmissbeacons); -+A_STATUS wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType, -+ A_UINT8 ieLen, A_UINT8 *ieInfo); -+A_STATUS wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode); -+A_STATUS wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl, -+ A_UINT16 atim_windows, A_UINT16 timeout_value); -+A_STATUS wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod, -+ A_UINT16 psPollNum, A_UINT16 dtimPolicy); -+A_STATUS wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout); -+A_STATUS wmi_sync_cmd(struct wmi_t *wmip, A_UINT8 syncNumber); -+A_STATUS wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *pstream); -+A_STATUS wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 streamID); -+A_STATUS wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate); -+A_STATUS wmi_get_bitrate_cmd(struct wmi_t *wmip); -+A_INT8 wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate); -+A_STATUS wmi_get_regDomain_cmd(struct wmi_t *wmip); -+A_STATUS wmi_get_channelList_cmd(struct wmi_t *wmip); -+A_STATUS wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam, -+ WMI_PHY_MODE mode, A_INT8 numChan, -+ A_UINT16 *channelList); -+ -+A_STATUS wmi_set_snr_threshold_params(struct wmi_t *wmip, -+ WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd); -+A_STATUS wmi_set_rssi_threshold_params(struct wmi_t *wmip, -+ WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd); -+A_STATUS wmi_clr_rssi_snr(struct wmi_t *wmip); -+A_STATUS wmi_set_lq_threshold_params(struct wmi_t *wmip, -+ WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd); -+A_STATUS wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold); -+A_STATUS wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status); -+ -+A_STATUS wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 bitmask); -+ -+A_STATUS wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie, -+ A_UINT32 source); -+A_STATUS wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask, -+ A_UINT16 tsr, A_BOOL rep, A_UINT16 size, -+ A_UINT32 valid); -+A_STATUS wmi_get_stats_cmd(struct wmi_t *wmip); -+A_STATUS wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex, -+ CRYPTO_TYPE keyType, A_UINT8 keyUsage, -+ A_UINT8 keyLength,A_UINT8 *keyRSC, -+ A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl, -+ WMI_SYNC_FLAG sync_flag); -+A_STATUS wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk); -+A_STATUS wmi_delete_krk_cmd(struct wmi_t *wmip); -+A_STATUS wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex); -+A_STATUS wmi_set_akmp_params_cmd(struct wmi_t *wmip, -+ WMI_SET_AKMP_PARAMS_CMD *akmpParams); -+A_STATUS wmi_get_pmkid_list_cmd(struct wmi_t *wmip); -+A_STATUS wmi_set_pmkid_list_cmd(struct wmi_t *wmip, -+ WMI_SET_PMKID_LIST_CMD *pmkInfo); -+A_STATUS wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM); -+A_STATUS wmi_get_txPwr_cmd(struct wmi_t *wmip); -+A_STATUS wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on); -+A_STATUS wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid); -+A_STATUS wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex); -+A_STATUS wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en); -+A_STATUS wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId, -+ A_BOOL set); -+A_STATUS wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop, -+ A_UINT8 eCWmin, A_UINT8 eCWmax, -+ A_UINT8 aifsn); -+A_STATUS wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType, -+ A_UINT8 trafficClass, A_UINT8 maxRetries, -+ A_UINT8 enableNotify); -+ -+void wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid); -+ -+A_STATUS wmi_get_roam_tbl_cmd(struct wmi_t *wmip); -+A_STATUS wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType); -+A_STATUS wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p, -+ A_UINT8 size); -+A_STATUS wmi_set_powersave_timers_cmd(struct wmi_t *wmip, -+ WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd, -+ A_UINT8 size); -+ -+A_STATUS wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode); -+A_STATUS wmi_opt_tx_frame_cmd(struct wmi_t *wmip, -+ A_UINT8 frmType, -+ A_UINT8 *dstMacAddr, -+ A_UINT8 *bssid, -+ A_UINT16 optIEDataLen, -+ A_UINT8 *optIEData); -+ -+A_STATUS wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl); -+A_STATUS wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize); -+A_STATUS wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSpLen); -+A_UINT8 convert_userPriority_to_trafficClass(A_UINT8 userPriority); -+A_UINT8 wmi_get_power_mode_cmd(struct wmi_t *wmip); -+A_STATUS wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance); -+ -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+A_STATUS wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32 len); -+#endif -+ -+A_STATUS wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status); -+A_STATUS wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd); -+ -+ -+/* -+ * This function is used to configure the fix rates mask to the target. -+ */ -+A_STATUS wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask); -+A_STATUS wmi_get_ratemask_cmd(struct wmi_t *wmip); -+ -+A_STATUS wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode); -+ -+A_STATUS wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode); -+ -+A_STATUS wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status); -+A_STATUS wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG txEnable); -+ -+A_STATUS wmi_get_keepalive_configured(struct wmi_t *wmip); -+A_UINT8 wmi_get_keepalive_cmd(struct wmi_t *wmip); -+A_STATUS wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval); -+ -+A_STATUS wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType, -+ A_UINT8 ieLen,A_UINT8 *ieInfo); -+ -+A_STATUS wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen); -+A_INT32 wmi_get_rate(A_INT8 rateindex); -+ -+/*Wake on Wireless WMI commands*/ -+A_STATUS wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip, WMI_SET_HOST_SLEEP_MODE_CMD *cmd); -+A_STATUS wmi_set_wow_mode_cmd(struct wmi_t *wmip, WMI_SET_WOW_MODE_CMD *cmd); -+A_STATUS wmi_get_wow_list_cmd(struct wmi_t *wmip, WMI_GET_WOW_LIST_CMD *cmd); -+A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip, -+ WMI_ADD_WOW_PATTERN_CMD *cmd, A_UINT8* pattern, A_UINT8* mask, A_UINT8 pattern_size); -+A_STATUS wmi_del_wow_pattern_cmd(struct wmi_t *wmip, -+ WMI_DEL_WOW_PATTERN_CMD *cmd); -+A_STATUS wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status); -+ -+bss_t * -+wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid, -+ A_UINT32 ssidLength, A_BOOL bIsWPA2); -+ -+void -+wmi_node_return (struct wmi_t *wmip, bss_t *bss); -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _WMI_API_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wmi.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wmi.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,1743 @@ -+/* -+ * Copyright (c) 2004-2006 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ * This file contains the definitions of the WMI protocol specified in the -+ * Wireless Module Interface (WMI). It includes definitions of all the -+ * commands and events. Commands are messages from the host to the WM. -+ * Events and Replies are messages from the WM to the host. -+ * -+ * Ownership of correctness in regards to WMI commands -+ * belongs to the host driver and the WM is not required to validate -+ * parameters for value, proper range, or any other checking. -+ * -+ */ -+ -+#ifndef _WMI_H_ -+#define _WMI_H_ -+ -+#ifndef ATH_TARGET -+#include "athstartpack.h" -+#endif -+ -+#include "wmix.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#define WMI_PROTOCOL_VERSION 0x0002 -+#define WMI_PROTOCOL_REVISION 0x0000 -+ -+#define ATH_MAC_LEN 6 /* length of mac in bytes */ -+#define WMI_CMD_MAX_LEN 100 -+#define WMI_CONTROL_MSG_MAX_LEN 256 -+#define WMI_OPT_CONTROL_MSG_MAX_LEN 1536 -+#define IS_ETHERTYPE(_typeOrLen) ((_typeOrLen) >= 0x0600) -+#define RFC1042OUI {0x00, 0x00, 0x00} -+ -+#define IP_ETHERTYPE 0x0800 -+ -+#define WMI_IMPLICIT_PSTREAM 0xFF -+#define WMI_MAX_THINSTREAM 15 -+ -+struct host_app_area_s { -+ A_UINT32 wmi_protocol_ver; -+}; -+ -+/* -+ * Data Path -+ */ -+typedef PREPACK struct { -+ A_UINT8 dstMac[ATH_MAC_LEN]; -+ A_UINT8 srcMac[ATH_MAC_LEN]; -+ A_UINT16 typeOrLen; -+} POSTPACK ATH_MAC_HDR; -+ -+typedef PREPACK struct { -+ A_UINT8 dsap; -+ A_UINT8 ssap; -+ A_UINT8 cntl; -+ A_UINT8 orgCode[3]; -+ A_UINT16 etherType; -+} POSTPACK ATH_LLC_SNAP_HDR; -+ -+typedef enum { -+ DATA_MSGTYPE = 0x0, -+ CNTL_MSGTYPE, -+ SYNC_MSGTYPE -+} WMI_MSG_TYPE; -+ -+ -+typedef PREPACK struct { -+ A_INT8 rssi; -+ A_UINT8 info; /* WMI_MSG_TYPE in lower 2 bits - b1b0 */ -+ /* UP in next 3 bits - b4b3b2 */ -+#define WMI_DATA_HDR_MSG_TYPE_MASK 0x03 -+#define WMI_DATA_HDR_MSG_TYPE_SHIFT 0 -+#define WMI_DATA_HDR_UP_MASK 0x07 -+#define WMI_DATA_HDR_UP_SHIFT 2 -+#define WMI_DATA_HDR_IS_MSG_TYPE(h, t) (((h)->info & (WMI_DATA_HDR_MSG_TYPE_MASK)) == (t)) -+} POSTPACK WMI_DATA_HDR; -+ -+ -+#define WMI_DATA_HDR_SET_MSG_TYPE(h, t) (h)->info = (((h)->info & ~(WMI_DATA_HDR_MSG_TYPE_MASK << WMI_DATA_HDR_MSG_TYPE_SHIFT)) | (t << WMI_DATA_HDR_MSG_TYPE_SHIFT)) -+#define WMI_DATA_HDR_SET_UP(h, p) (h)->info = (((h)->info & ~(WMI_DATA_HDR_UP_MASK << WMI_DATA_HDR_UP_SHIFT)) | (p << WMI_DATA_HDR_UP_SHIFT)) -+ -+/* -+ * Control Path -+ */ -+typedef PREPACK struct { -+ A_UINT16 commandId; -+} POSTPACK WMI_CMD_HDR; /* used for commands and events */ -+ -+/* -+ * List of Commnands -+ */ -+typedef enum { -+ WMI_CONNECT_CMDID = 0x0001, -+ WMI_RECONNECT_CMDID, -+ WMI_DISCONNECT_CMDID, -+ WMI_SYNCHRONIZE_CMDID, -+ WMI_CREATE_PSTREAM_CMDID, -+ WMI_DELETE_PSTREAM_CMDID, -+ WMI_START_SCAN_CMDID, -+ WMI_SET_SCAN_PARAMS_CMDID, -+ WMI_SET_BSS_FILTER_CMDID, -+ WMI_SET_PROBED_SSID_CMDID, -+ WMI_SET_LISTEN_INT_CMDID, -+ WMI_SET_BMISS_TIME_CMDID, -+ WMI_SET_DISC_TIMEOUT_CMDID, -+ WMI_GET_CHANNEL_LIST_CMDID, -+ WMI_SET_BEACON_INT_CMDID, -+ WMI_GET_STATISTICS_CMDID, -+ WMI_SET_CHANNEL_PARAMS_CMDID, -+ WMI_SET_POWER_MODE_CMDID, -+ WMI_SET_IBSS_PM_CAPS_CMDID, -+ WMI_SET_POWER_PARAMS_CMDID, -+ WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID, -+ WMI_ADD_CIPHER_KEY_CMDID, -+ WMI_DELETE_CIPHER_KEY_CMDID, -+ WMI_ADD_KRK_CMDID, -+ WMI_DELETE_KRK_CMDID, -+ WMI_SET_PMKID_CMDID, -+ WMI_SET_TX_PWR_CMDID, -+ WMI_GET_TX_PWR_CMDID, -+ WMI_SET_ASSOC_INFO_CMDID, -+ WMI_ADD_BAD_AP_CMDID, -+ WMI_DELETE_BAD_AP_CMDID, -+ WMI_SET_TKIP_COUNTERMEASURES_CMDID, -+ WMI_RSSI_THRESHOLD_PARAMS_CMDID, -+ WMI_TARGET_ERROR_REPORT_BITMASK_CMDID, -+ WMI_SET_ACCESS_PARAMS_CMDID, -+ WMI_SET_RETRY_LIMITS_CMDID, -+ WMI_SET_OPT_MODE_CMDID, -+ WMI_OPT_TX_FRAME_CMDID, -+ WMI_SET_VOICE_PKT_SIZE_CMDID, -+ WMI_SET_MAX_SP_LEN_CMDID, -+ WMI_SET_ROAM_CTRL_CMDID, -+ WMI_GET_ROAM_TBL_CMDID, -+ WMI_GET_ROAM_DATA_CMDID, -+ WMI_ENABLE_RM_CMDID, -+ WMI_SET_MAX_OFFHOME_DURATION_CMDID, -+ WMI_EXTENSION_CMDID, /* Non-wireless extensions */ -+ WMI_SNR_THRESHOLD_PARAMS_CMDID, -+ WMI_LQ_THRESHOLD_PARAMS_CMDID, -+ WMI_SET_LPREAMBLE_CMDID, -+ WMI_SET_RTS_CMDID, -+ WMI_CLR_RSSI_SNR_CMDID, -+ WMI_SET_FIXRATES_CMDID, -+ WMI_GET_FIXRATES_CMDID, -+ WMI_SET_AUTH_MODE_CMDID, -+ WMI_SET_REASSOC_MODE_CMDID, -+ WMI_SET_WMM_CMDID, -+ WMI_SET_WMM_TXOP_CMDID, -+ WMI_TEST_CMDID, -+ WMI_SET_BT_STATUS_CMDID, -+ WMI_SET_BT_PARAMS_CMDID, -+ -+ WMI_SET_KEEPALIVE_CMDID, -+ WMI_GET_KEEPALIVE_CMDID, -+ WMI_SET_APPIE_CMDID, -+ WMI_GET_APPIE_CMDID, -+ WMI_SET_WSC_STATUS_CMDID, -+ -+ /* Wake on Wireless */ -+ WMI_SET_HOST_SLEEP_MODE_CMDID, -+ WMI_SET_WOW_MODE_CMDID, -+ WMI_GET_WOW_LIST_CMDID, -+ WMI_ADD_WOW_PATTERN_CMDID, -+ WMI_DEL_WOW_PATTERN_CMDID, -+ WMI_SET_MAC_ADDRESS_CMDID, -+ WMI_SET_AKMP_PARAMS_CMDID, -+ WMI_SET_PMKID_LIST_CMDID, -+ WMI_GET_PMKID_LIST_CMDID, -+ -+ /* -+ * Developer commands starts at 0xF000 -+ */ -+ WMI_SET_BITRATE_CMDID = 0xF000, -+ WMI_GET_BITRATE_CMDID, -+ WMI_SET_WHALPARAM_CMDID, -+ -+} WMI_COMMAND_ID; -+ -+/* -+ * Frame Types -+ */ -+typedef enum { -+ WMI_FRAME_BEACON = 0, -+ WMI_FRAME_PROBE_REQ, -+ WMI_FRAME_PROBE_RESP, -+ WMI_FRAME_ASSOC_REQ, -+ WMI_FRAME_ASSOC_RESP, -+ WMI_NUM_MGMT_FRAME -+} WMI_MGMT_FRAME_TYPE; -+ -+/* -+ * Connect Command -+ */ -+typedef enum { -+ INFRA_NETWORK = 0x01, -+ ADHOC_NETWORK = 0x02, -+ ADHOC_CREATOR = 0x04, -+} NETWORK_TYPE; -+ -+typedef enum { -+ OPEN_AUTH = 0x01, -+ SHARED_AUTH = 0x02, -+ LEAP_AUTH = 0x04, /* different from IEEE_AUTH_MODE definitions */ -+} DOT11_AUTH_MODE; -+ -+typedef enum { -+ NONE_AUTH = 0x01, -+ WPA_AUTH = 0x02, -+ WPA_PSK_AUTH = 0x03, -+ WPA2_AUTH = 0x04, -+ WPA2_PSK_AUTH = 0x05, -+ WPA_AUTH_CCKM = 0x06, -+ WPA2_AUTH_CCKM = 0x07, -+} AUTH_MODE; -+ -+typedef enum { -+ NONE_CRYPT = 0x01, -+ WEP_CRYPT = 0x02, -+ TKIP_CRYPT = 0x03, -+ AES_CRYPT = 0x04, -+} CRYPTO_TYPE; -+ -+#define WMI_MIN_CRYPTO_TYPE NONE_CRYPT -+#define WMI_MAX_CRYPTO_TYPE (AES_CRYPT + 1) -+ -+#define WMI_MIN_KEY_INDEX 0 -+#define WMI_MAX_KEY_INDEX 3 -+ -+#define WMI_MAX_KEY_LEN 32 -+ -+#define WMI_MAX_SSID_LEN 32 -+ -+typedef enum { -+ CONNECT_ASSOC_POLICY_USER = 0x0001, -+ CONNECT_SEND_REASSOC = 0x0002, -+ CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004, -+ CONNECT_PROFILE_MATCH_DONE = 0x0008, -+ CONNECT_IGNORE_AAC_BEACON = 0x0010, -+ CONNECT_CSA_FOLLOW_BSS = 0x0020, -+} WMI_CONNECT_CTRL_FLAGS_BITS; -+ -+#define DEFAULT_CONNECT_CTRL_FLAGS (CONNECT_CSA_FOLLOW_BSS) -+ -+typedef PREPACK struct { -+ A_UINT8 networkType; -+ A_UINT8 dot11AuthMode; -+ A_UINT8 authMode; -+ A_UINT8 pairwiseCryptoType; -+ A_UINT8 pairwiseCryptoLen; -+ A_UINT8 groupCryptoType; -+ A_UINT8 groupCryptoLen; -+ A_UINT8 ssidLength; -+ A_UCHAR ssid[WMI_MAX_SSID_LEN]; -+ A_UINT16 channel; -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_UINT32 ctrl_flags; -+} POSTPACK WMI_CONNECT_CMD; -+ -+/* -+ * WMI_RECONNECT_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT16 channel; /* hint */ -+ A_UINT8 bssid[ATH_MAC_LEN]; /* mandatory if set */ -+} POSTPACK WMI_RECONNECT_CMD; -+ -+/* -+ * WMI_ADD_CIPHER_KEY_CMDID -+ */ -+typedef enum { -+ PAIRWISE_USAGE = 0x00, -+ GROUP_USAGE = 0x01, -+ TX_USAGE = 0x02, /* default Tx Key - Static WEP only */ -+} KEY_USAGE; -+ -+/* -+ * Bit Flag -+ * Bit 0 - Initialise TSC - default is Initialize -+ */ -+#define KEY_OP_INIT_TSC 0x01 -+#define KEY_OP_INIT_RSC 0x02 -+ -+#define KEY_OP_INIT_VAL 0x03 /* Default Initialise the TSC & RSC */ -+#define KEY_OP_VALID_MASK 0x03 -+ -+typedef PREPACK struct { -+ A_UINT8 keyIndex; -+ A_UINT8 keyType; -+ A_UINT8 keyUsage; /* KEY_USAGE */ -+ A_UINT8 keyLength; -+ A_UINT8 keyRSC[8]; /* key replay sequence counter */ -+ A_UINT8 key[WMI_MAX_KEY_LEN]; -+ A_UINT8 key_op_ctrl; /* Additional Key Control information */ -+} POSTPACK WMI_ADD_CIPHER_KEY_CMD; -+ -+/* -+ * WMI_DELETE_CIPHER_KEY_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT8 keyIndex; -+} POSTPACK WMI_DELETE_CIPHER_KEY_CMD; -+ -+#define WMI_KRK_LEN 16 -+/* -+ * WMI_ADD_KRK_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT8 krk[WMI_KRK_LEN]; -+} POSTPACK WMI_ADD_KRK_CMD; -+ -+/* -+ * WMI_SET_TKIP_COUNTERMEASURES_CMDID -+ */ -+typedef enum { -+ WMI_TKIP_CM_DISABLE = 0x0, -+ WMI_TKIP_CM_ENABLE = 0x1, -+} WMI_TKIP_CM_CONTROL; -+ -+typedef PREPACK struct { -+ A_UINT8 cm_en; /* WMI_TKIP_CM_CONTROL */ -+} POSTPACK WMI_SET_TKIP_COUNTERMEASURES_CMD; -+ -+/* -+ * WMI_SET_PMKID_CMDID -+ */ -+ -+#define WMI_PMKID_LEN 16 -+ -+typedef enum { -+ PMKID_DISABLE = 0, -+ PMKID_ENABLE = 1, -+} PMKID_ENABLE_FLG; -+ -+typedef PREPACK struct { -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_UINT8 enable; /* PMKID_ENABLE_FLG */ -+ A_UINT8 pmkid[WMI_PMKID_LEN]; -+} POSTPACK WMI_SET_PMKID_CMD; -+ -+/* -+ * WMI_START_SCAN_CMD -+ */ -+typedef enum { -+ WMI_LONG_SCAN = 0, -+ WMI_SHORT_SCAN = 1, -+} WMI_SCAN_TYPE; -+ -+typedef PREPACK struct { -+ A_BOOL forceFgScan; -+ A_BOOL isLegacy; /* For Legacy Cisco AP compatibility */ -+ A_UINT32 homeDwellTime; /* Maximum duration in the home channel(milliseconds) */ -+ A_UINT32 forceScanInterval; /* Time interval between scans (milliseconds)*/ -+ A_UINT8 scanType; /* WMI_SCAN_TYPE */ -+} POSTPACK WMI_START_SCAN_CMD; -+ -+/* -+ * WMI_SET_SCAN_PARAMS_CMDID -+ */ -+#define WMI_SHORTSCANRATIO_DEFAULT 3 -+typedef enum { -+ CONNECT_SCAN_CTRL_FLAGS = 0x01, /* set if can scan in the Connect cmd */ -+ SCAN_CONNECTED_CTRL_FLAGS = 0x02, /* set if scan for the SSID it is */ -+ /* already connected to */ -+ ACTIVE_SCAN_CTRL_FLAGS = 0x04, /* set if enable active scan */ -+ ROAM_SCAN_CTRL_FLAGS = 0x08, /* set if enable roam scan when bmiss and lowrssi */ -+ REPORT_BSSINFO_CTRL_FLAGS = 0x10, /* set if follows customer BSSINFO reporting rule */ -+ ENABLE_AUTO_CTRL_FLAGS = 0x20, /* if disabled, target doesn't -+ scan after a disconnect event */ -+ ENABLE_SCAN_ABORT_EVENT = 0x40 /* Scan complete event with canceled status will be generated when a scan is prempted before it gets completed */ -+ -+} WMI_SCAN_CTRL_FLAGS_BITS; -+ -+#define CAN_SCAN_IN_CONNECT(flags) (flags & CONNECT_SCAN_CTRL_FLAGS) -+#define CAN_SCAN_CONNECTED(flags) (flags & SCAN_CONNECTED_CTRL_FLAGS) -+#define ENABLE_ACTIVE_SCAN(flags) (flags & ACTIVE_SCAN_CTRL_FLAGS) -+#define ENABLE_ROAM_SCAN(flags) (flags & ROAM_SCAN_CTRL_FLAGS) -+#define CONFIG_REPORT_BSSINFO(flags) (flags & REPORT_BSSINFO_CTRL_FLAGS) -+#define IS_AUTO_SCAN_ENABLED(flags) (flags & ENABLE_AUTO_CTRL_FLAGS) -+#define SCAN_ABORT_EVENT_ENABLED(flags) (flags & ENABLE_SCAN_ABORT_EVENT) -+ -+#define DEFAULT_SCAN_CTRL_FLAGS (CONNECT_SCAN_CTRL_FLAGS| SCAN_CONNECTED_CTRL_FLAGS| ACTIVE_SCAN_CTRL_FLAGS| ROAM_SCAN_CTRL_FLAGS | ENABLE_AUTO_CTRL_FLAGS) -+ -+ -+typedef PREPACK struct { -+ A_UINT16 fg_start_period; /* seconds */ -+ A_UINT16 fg_end_period; /* seconds */ -+ A_UINT16 bg_period; /* seconds */ -+ A_UINT16 maxact_chdwell_time; /* msec */ -+ A_UINT16 pas_chdwell_time; /* msec */ -+ A_UINT8 shortScanRatio; /* how many shorts scan for one long */ -+ A_UINT8 scanCtrlFlags; -+ A_UINT16 minact_chdwell_time; /* msec */ -+ A_UINT32 max_dfsch_act_time; /* msecs */ -+} POSTPACK WMI_SCAN_PARAMS_CMD; -+ -+/* -+ * WMI_SET_BSS_FILTER_CMDID -+ */ -+typedef enum { -+ NONE_BSS_FILTER = 0x0, /* no beacons forwarded */ -+ ALL_BSS_FILTER, /* all beacons forwarded */ -+ PROFILE_FILTER, /* only beacons matching profile */ -+ ALL_BUT_PROFILE_FILTER, /* all but beacons matching profile */ -+ CURRENT_BSS_FILTER, /* only beacons matching current BSS */ -+ ALL_BUT_BSS_FILTER, /* all but beacons matching BSS */ -+ PROBED_SSID_FILTER, /* beacons matching probed ssid */ -+ LAST_BSS_FILTER, /* marker only */ -+} WMI_BSS_FILTER; -+ -+typedef PREPACK struct { -+ A_UINT8 bssFilter; /* see WMI_BSS_FILTER */ -+ A_UINT32 ieMask; -+} POSTPACK WMI_BSS_FILTER_CMD; -+ -+/* -+ * WMI_SET_PROBED_SSID_CMDID -+ */ -+#define MAX_PROBED_SSID_INDEX 5 -+ -+typedef enum { -+ DISABLE_SSID_FLAG = 0, /* disables entry */ -+ SPECIFIC_SSID_FLAG = 0x01, /* probes specified ssid */ -+ ANY_SSID_FLAG = 0x02, /* probes for any ssid */ -+} WMI_SSID_FLAG; -+ -+typedef PREPACK struct { -+ A_UINT8 entryIndex; /* 0 to MAX_PROBED_SSID_INDEX */ -+ A_UINT8 flag; /* WMI_SSID_FLG */ -+ A_UINT8 ssidLength; -+ A_UINT8 ssid[32]; -+} POSTPACK WMI_PROBED_SSID_CMD; -+ -+/* -+ * WMI_SET_LISTEN_INT_CMDID -+ * The Listen interval is between 15 and 3000 TUs -+ */ -+#define MIN_LISTEN_INTERVAL 15 -+#define MAX_LISTEN_INTERVAL 5000 -+#define MIN_LISTEN_BEACONS 1 -+#define MAX_LISTEN_BEACONS 50 -+ -+typedef PREPACK struct { -+ A_UINT16 listenInterval; -+ A_UINT16 numBeacons; -+} POSTPACK WMI_LISTEN_INT_CMD; -+ -+/* -+ * WMI_SET_BEACON_INT_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT16 beaconInterval; -+} POSTPACK WMI_BEACON_INT_CMD; -+ -+/* -+ * WMI_SET_BMISS_TIME_CMDID -+ * valid values are between 1000 and 5000 TUs -+ */ -+ -+#define MIN_BMISS_TIME 1000 -+#define MAX_BMISS_TIME 5000 -+#define MIN_BMISS_BEACONS 1 -+#define MAX_BMISS_BEACONS 50 -+ -+typedef PREPACK struct { -+ A_UINT16 bmissTime; -+ A_UINT16 numBeacons; -+} POSTPACK WMI_BMISS_TIME_CMD; -+ -+/* -+ * WMI_SET_POWER_MODE_CMDID -+ */ -+typedef enum { -+ REC_POWER = 0x01, -+ MAX_PERF_POWER, -+} WMI_POWER_MODE; -+ -+typedef PREPACK struct { -+ A_UINT8 powerMode; /* WMI_POWER_MODE */ -+} POSTPACK WMI_POWER_MODE_CMD; -+ -+/* -+ * WMI_SET_POWER_PARAMS_CMDID -+ */ -+typedef enum { -+ IGNORE_DTIM = 0x01, -+ NORMAL_DTIM = 0x02, -+ STICK_DTIM = 0x03, -+} WMI_DTIM_POLICY; -+ -+typedef PREPACK struct { -+ A_UINT16 idle_period; /* msec */ -+ A_UINT16 pspoll_number; -+ A_UINT16 dtim_policy; -+} POSTPACK WMI_POWER_PARAMS_CMD; -+ -+typedef PREPACK struct { -+ A_UINT8 power_saving; -+ A_UINT8 ttl; /* number of beacon periods */ -+ A_UINT16 atim_windows; /* msec */ -+ A_UINT16 timeout_value; /* msec */ -+} POSTPACK WMI_IBSS_PM_CAPS_CMD; -+ -+/* -+ * WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID -+ */ -+typedef enum { -+ IGNORE_TIM_ALL_QUEUES_APSD = 0, -+ PROCESS_TIM_ALL_QUEUES_APSD = 1, -+ IGNORE_TIM_SIMULATED_APSD = 2, -+ PROCESS_TIM_SIMULATED_APSD = 3, -+} APSD_TIM_POLICY; -+ -+typedef PREPACK struct { -+ A_UINT16 psPollTimeout; /* msec */ -+ A_UINT16 triggerTimeout; /* msec */ -+ A_UINT32 apsdTimPolicy; /* TIM behavior with ques APSD enabled. Default is IGNORE_TIM_ALL_QUEUES_APSD */ -+ A_UINT32 simulatedAPSDTimPolicy; /* TIM behavior with simulated APSD enabled. Default is PROCESS_TIM_SIMULATED_APSD */ -+} POSTPACK WMI_POWERSAVE_TIMERS_POLICY_CMD; -+ -+/* -+ * WMI_SET_VOICE_PKT_SIZE_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT16 voicePktSize; -+} POSTPACK WMI_SET_VOICE_PKT_SIZE_CMD; -+ -+/* -+ * WMI_SET_MAX_SP_LEN_CMDID -+ */ -+typedef enum { -+ DELIVER_ALL_PKT = 0x0, -+ DELIVER_2_PKT = 0x1, -+ DELIVER_4_PKT = 0x2, -+ DELIVER_6_PKT = 0x3, -+} APSD_SP_LEN_TYPE; -+ -+typedef PREPACK struct { -+ A_UINT8 maxSPLen; -+} POSTPACK WMI_SET_MAX_SP_LEN_CMD; -+ -+/* -+ * WMI_SET_DISC_TIMEOUT_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT8 disconnectTimeout; /* seconds */ -+} POSTPACK WMI_DISC_TIMEOUT_CMD; -+ -+typedef enum { -+ UPLINK_TRAFFIC = 0, -+ DNLINK_TRAFFIC = 1, -+ BIDIR_TRAFFIC = 2, -+} DIR_TYPE; -+ -+typedef enum { -+ DISABLE_FOR_THIS_AC = 0, -+ ENABLE_FOR_THIS_AC = 1, -+ ENABLE_FOR_ALL_AC = 2, -+} VOICEPS_CAP_TYPE; -+ -+typedef enum { -+ TRAFFIC_TYPE_APERIODIC = 0, -+ TRAFFIC_TYPE_PERIODIC = 1, -+}TRAFFIC_TYPE; -+ -+/* -+ * WMI_CREATE_PSTREAM_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT32 minServiceInt; /* in milli-sec */ -+ A_UINT32 maxServiceInt; /* in milli-sec */ -+ A_UINT32 inactivityInt; /* in milli-sec */ -+ A_UINT32 suspensionInt; /* in milli-sec */ -+ A_UINT32 serviceStartTime; -+ A_UINT32 minDataRate; /* in bps */ -+ A_UINT32 meanDataRate; /* in bps */ -+ A_UINT32 peakDataRate; /* in bps */ -+ A_UINT32 maxBurstSize; -+ A_UINT32 delayBound; -+ A_UINT32 minPhyRate; /* in bps */ -+ A_UINT32 sba; -+ A_UINT32 mediumTime; -+ A_UINT16 nominalMSDU; /* in octects */ -+ A_UINT16 maxMSDU; /* in octects */ -+ A_UINT8 trafficClass; -+ A_UINT8 trafficType; /* TRAFFIC_TYPE */ -+ A_UINT8 trafficDirection; /* TRAFFIC_DIR */ -+ A_UINT8 voicePSCapability; /* VOICEPS_CAP_TYPE */ -+ A_UINT8 tsid; -+ A_UINT8 userPriority; /* 802.1D user priority */ -+} POSTPACK WMI_CREATE_PSTREAM_CMD; -+ -+/* -+ * WMI_DELETE_PSTREAM_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT8 trafficClass; -+ A_UINT8 tsid; -+} POSTPACK WMI_DELETE_PSTREAM_CMD; -+ -+/* -+ * WMI_SET_CHANNEL_PARAMS_CMDID -+ */ -+typedef enum { -+ WMI_11A_MODE = 0x1, -+ WMI_11G_MODE = 0x2, -+ WMI_11AG_MODE = 0x3, -+ WMI_11B_MODE = 0x4, -+ WMI_11GONLY_MODE = 0x5, -+} WMI_PHY_MODE; -+ -+#define WMI_MAX_CHANNELS 32 -+ -+typedef PREPACK struct { -+ A_UINT8 reserved1; -+ A_UINT8 scanParam; /* set if enable scan */ -+ A_UINT8 phyMode; /* see WMI_PHY_MODE */ -+ A_UINT8 numChannels; /* how many channels follow */ -+ A_UINT16 channelList[1]; /* channels in Mhz */ -+} POSTPACK WMI_CHANNEL_PARAMS_CMD; -+ -+ -+/* -+ * WMI_RSSI_THRESHOLD_PARAMS_CMDID -+ * Setting the polltime to 0 would disable polling. -+ * Threshold values are in the ascending order, and should agree to: -+ * (lowThreshold_lowerVal < lowThreshold_upperVal < highThreshold_lowerVal -+ * < highThreshold_upperVal) -+ */ -+ -+typedef PREPACK struct WMI_RSSI_THRESHOLD_PARAMS{ -+ A_UINT32 pollTime; /* Polling time as a factor of LI */ -+ A_INT16 thresholdAbove1_Val; /* lowest of upper */ -+ A_INT16 thresholdAbove2_Val; -+ A_INT16 thresholdAbove3_Val; -+ A_INT16 thresholdAbove4_Val; -+ A_INT16 thresholdAbove5_Val; -+ A_INT16 thresholdAbove6_Val; /* highest of upper */ -+ A_INT16 thresholdBelow1_Val; /* lowest of bellow */ -+ A_INT16 thresholdBelow2_Val; -+ A_INT16 thresholdBelow3_Val; -+ A_INT16 thresholdBelow4_Val; -+ A_INT16 thresholdBelow5_Val; -+ A_INT16 thresholdBelow6_Val; /* highest of bellow */ -+ A_UINT8 weight; /* "alpha" */ -+ A_UINT8 reserved[3]; -+} POSTPACK WMI_RSSI_THRESHOLD_PARAMS_CMD; -+ -+/* -+ * WMI_SNR_THRESHOLD_PARAMS_CMDID -+ * Setting the polltime to 0 would disable polling. -+ */ -+ -+typedef PREPACK struct WMI_SNR_THRESHOLD_PARAMS{ -+ A_UINT32 pollTime; /* Polling time as a factor of LI */ -+ A_UINT8 weight; /* "alpha" */ -+ A_UINT8 thresholdAbove1_Val; /* lowest of uppper*/ -+ A_UINT8 thresholdAbove2_Val; -+ A_UINT8 thresholdAbove3_Val; -+ A_UINT8 thresholdAbove4_Val; /* highest of upper */ -+ A_UINT8 thresholdBelow1_Val; /* lowest of bellow */ -+ A_UINT8 thresholdBelow2_Val; -+ A_UINT8 thresholdBelow3_Val; -+ A_UINT8 thresholdBelow4_Val; /* highest of bellow */ -+ A_UINT8 reserved[3]; -+} POSTPACK WMI_SNR_THRESHOLD_PARAMS_CMD; -+ -+/* -+ * WMI_LQ_THRESHOLD_PARAMS_CMDID -+ */ -+typedef PREPACK struct WMI_LQ_THRESHOLD_PARAMS { -+ A_UINT8 enable; -+ A_UINT8 thresholdAbove1_Val; -+ A_UINT8 thresholdAbove2_Val; -+ A_UINT8 thresholdAbove3_Val; -+ A_UINT8 thresholdAbove4_Val; -+ A_UINT8 thresholdBelow1_Val; -+ A_UINT8 thresholdBelow2_Val; -+ A_UINT8 thresholdBelow3_Val; -+ A_UINT8 thresholdBelow4_Val; -+ A_UINT8 reserved[3]; -+} POSTPACK WMI_LQ_THRESHOLD_PARAMS_CMD; -+ -+typedef enum { -+ WMI_LPREAMBLE_DISABLED = 0, -+ WMI_LPREAMBLE_ENABLED -+} WMI_LPREAMBLE_STATUS; -+ -+typedef PREPACK struct { -+ A_UINT8 status; -+}POSTPACK WMI_SET_LPREAMBLE_CMD; -+ -+typedef PREPACK struct { -+ A_UINT16 threshold; -+}POSTPACK WMI_SET_RTS_CMD; -+ -+/* -+ * WMI_TARGET_ERROR_REPORT_BITMASK_CMDID -+ * Sets the error reporting event bitmask in target. Target clears it -+ * upon an error. Subsequent errors are counted, but not reported -+ * via event, unless the bitmask is set again. -+ */ -+typedef PREPACK struct { -+ A_UINT32 bitmask; -+} POSTPACK WMI_TARGET_ERROR_REPORT_BITMASK; -+ -+/* -+ * WMI_SET_TX_PWR_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT8 dbM; /* in dbM units */ -+} POSTPACK WMI_SET_TX_PWR_CMD, WMI_TX_PWR_REPLY; -+ -+/* -+ * WMI_SET_ASSOC_INFO_CMDID -+ * -+ * A maximum of 2 private IEs can be sent in the [Re]Assoc request. -+ * A 3rd one, the CCX version IE can also be set from the host. -+ */ -+#define WMI_MAX_ASSOC_INFO_TYPE 2 -+#define WMI_CCX_VER_IE 2 /* ieType to set CCX Version IE */ -+ -+#define WMI_MAX_ASSOC_INFO_LEN 240 -+ -+typedef PREPACK struct { -+ A_UINT8 ieType; -+ A_UINT8 bufferSize; -+ A_UINT8 assocInfo[1]; /* up to WMI_MAX_ASSOC_INFO_LEN */ -+} POSTPACK WMI_SET_ASSOC_INFO_CMD; -+ -+ -+/* -+ * WMI_GET_TX_PWR_CMDID does not take any parameters -+ */ -+ -+/* -+ * WMI_ADD_BAD_AP_CMDID -+ */ -+#define WMI_MAX_BAD_AP_INDEX 1 -+ -+typedef PREPACK struct { -+ A_UINT8 badApIndex; /* 0 to WMI_MAX_BAD_AP_INDEX */ -+ A_UINT8 bssid[ATH_MAC_LEN]; -+} POSTPACK WMI_ADD_BAD_AP_CMD; -+ -+/* -+ * WMI_DELETE_BAD_AP_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT8 badApIndex; /* 0 to WMI_MAX_BAD_AP_INDEX */ -+} POSTPACK WMI_DELETE_BAD_AP_CMD; -+ -+/* -+ * WMI_SET_ACCESS_PARAMS_CMDID -+ */ -+#define WMI_DEFAULT_TXOP_ACPARAM 0 /* implies one MSDU */ -+#define WMI_DEFAULT_ECWMIN_ACPARAM 4 /* corresponds to CWmin of 15 */ -+#define WMI_DEFAULT_ECWMAX_ACPARAM 10 /* corresponds to CWmax of 1023 */ -+#define WMI_MAX_CW_ACPARAM 15 /* maximum eCWmin or eCWmax */ -+#define WMI_DEFAULT_AIFSN_ACPARAM 2 -+#define WMI_MAX_AIFSN_ACPARAM 15 -+typedef PREPACK struct { -+ A_UINT16 txop; /* in units of 32 usec */ -+ A_UINT8 eCWmin; -+ A_UINT8 eCWmax; -+ A_UINT8 aifsn; -+} POSTPACK WMI_SET_ACCESS_PARAMS_CMD; -+ -+ -+/* -+ * WMI_SET_RETRY_LIMITS_CMDID -+ * -+ * This command is used to customize the number of retries the -+ * wlan device will perform on a given frame. -+ */ -+#define WMI_MIN_RETRIES 2 -+#define WMI_MAX_RETRIES 13 -+typedef enum { -+ MGMT_FRAMETYPE = 0, -+ CONTROL_FRAMETYPE = 1, -+ DATA_FRAMETYPE = 2 -+} WMI_FRAMETYPE; -+ -+typedef PREPACK struct { -+ A_UINT8 frameType; /* WMI_FRAMETYPE */ -+ A_UINT8 trafficClass; /* applies only to DATA_FRAMETYPE */ -+ A_UINT8 maxRetries; -+ A_UINT8 enableNotify; -+} POSTPACK WMI_SET_RETRY_LIMITS_CMD; -+ -+/* -+ * WMI_SET_ROAM_CTRL_CMDID -+ * -+ * This command is used to influence the Roaming behaviour -+ * Set the host biases of the BSSs before setting the roam mode as bias -+ * based. -+ */ -+ -+/* -+ * Different types of Roam Control -+ */ -+ -+typedef enum { -+ WMI_FORCE_ROAM = 1, /* Roam to the specified BSSID */ -+ WMI_SET_ROAM_MODE = 2, /* default ,progd bias, no roam */ -+ WMI_SET_HOST_BIAS = 3, /* Set the Host Bias */ -+ WMI_SET_LOWRSSI_SCAN_PARAMS = 4, /* Set lowrssi Scan parameters */ -+} WMI_ROAM_CTRL_TYPE; -+ -+#define WMI_MIN_ROAM_CTRL_TYPE WMI_FORCE_ROAM -+#define WMI_MAX_ROAM_CTRL_TYPE WMI_SET_LOWRSSI_SCAN_PARAMS -+ -+/* -+ * ROAM MODES -+ */ -+ -+typedef enum { -+ WMI_DEFAULT_ROAM_MODE = 1, /* RSSI based ROAM */ -+ WMI_HOST_BIAS_ROAM_MODE = 2, /* HOST BIAS based ROAM */ -+ WMI_LOCK_BSS_MODE = 3 /* Lock to the Current BSS - no Roam */ -+} WMI_ROAM_MODE; -+ -+/* -+ * BSS HOST BIAS INFO -+ */ -+ -+typedef PREPACK struct { -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_INT8 bias; -+} POSTPACK WMI_BSS_BIAS; -+ -+typedef PREPACK struct { -+ A_UINT8 numBss; -+ WMI_BSS_BIAS bssBias[1]; -+} POSTPACK WMI_BSS_BIAS_INFO; -+ -+typedef PREPACK struct WMI_LOWRSSI_SCAN_PARAMS { -+ A_UINT16 lowrssi_scan_period; -+ A_INT16 lowrssi_scan_threshold; -+ A_INT16 lowrssi_roam_threshold; -+ A_UINT8 roam_rssi_floor; -+ A_UINT8 reserved[1]; /* For alignment */ -+} POSTPACK WMI_LOWRSSI_SCAN_PARAMS; -+ -+typedef PREPACK struct { -+ PREPACK union { -+ A_UINT8 bssid[ATH_MAC_LEN]; /* WMI_FORCE_ROAM */ -+ A_UINT8 roamMode; /* WMI_SET_ROAM_MODE */ -+ WMI_BSS_BIAS_INFO bssBiasInfo; /* WMI_SET_HOST_BIAS */ -+ WMI_LOWRSSI_SCAN_PARAMS lrScanParams; -+ } POSTPACK info; -+ A_UINT8 roamCtrlType ; -+} POSTPACK WMI_SET_ROAM_CTRL_CMD; -+ -+/* -+ * WMI_ENABLE_RM_CMDID -+ */ -+typedef PREPACK struct { -+ A_BOOL enable_radio_measurements; -+} POSTPACK WMI_ENABLE_RM_CMD; -+ -+/* -+ * WMI_SET_MAX_OFFHOME_DURATION_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT8 max_offhome_duration; -+} POSTPACK WMI_SET_MAX_OFFHOME_DURATION_CMD; -+ -+typedef PREPACK struct { -+ A_UINT32 frequency; -+ A_UINT8 threshold; -+} POSTPACK WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD; -+ -+typedef enum { -+ BT_STREAM_UNDEF = 0, -+ BT_STREAM_SCO, /* SCO stream */ -+ BT_STREAM_A2DP, /* A2DP stream */ -+ BT_STREAM_MAX -+} BT_STREAM_TYPE; -+ -+typedef enum { -+ BT_PARAM_SCO = 1, /* SCO stream parameters */ -+ BT_PARAM_A2DP, /* A2DP stream parameters */ -+ BT_PARAM_MISC, /* miscellaneous parameters */ -+ BT_PARAM_REGS, /* co-existence register parameters */ -+ BT_PARAM_MAX -+} BT_PARAM_TYPE; -+ -+typedef enum { -+ BT_STATUS_UNDEF = 0, -+ BT_STATUS_START, -+ BT_STATUS_STOP, -+ BT_STATUS_RESUME, -+ BT_STATUS_SUSPEND, -+ BT_STATUS_MAX -+} BT_STREAM_STATUS; -+ -+typedef PREPACK struct { -+ A_UINT8 streamType; -+ A_UINT8 status; -+} POSTPACK WMI_SET_BT_STATUS_CMD; -+ -+typedef PREPACK struct { -+ A_UINT8 noSCOPkts; -+ A_UINT8 pspollTimeout; -+ A_UINT8 stompbt; -+} POSTPACK BT_PARAMS_SCO; -+ -+typedef PREPACK struct { -+ A_UINT32 period; -+ A_UINT32 dutycycle; -+ A_UINT8 stompbt; -+} POSTPACK BT_PARAMS_A2DP; -+ -+typedef PREPACK struct { -+ A_UINT32 mode; -+ A_UINT32 scoWghts; -+ A_UINT32 a2dpWghts; -+ A_UINT32 genWghts; -+ A_UINT32 mode2; -+ A_UINT8 setVal; -+} POSTPACK BT_COEX_REGS; -+ -+typedef enum { -+ WLAN_PROTECT_POLICY = 1, -+ WLAN_COEX_CTRL_FLAGS -+} BT_PARAMS_MISC_TYPE; -+ -+typedef enum { -+ WLAN_PROTECT_PER_STREAM = 0x01, /* default */ -+ WLAN_PROTECT_ANY_TX = 0x02 -+} WLAN_PROTECT_FLAGS; -+ -+ -+#define WLAN_DISABLE_COEX_IN_DISCONNECT 0x01 /* default */ -+#define WLAN_KEEP_COEX_IN_DISCONNECT 0x02 -+#define WLAN_STOMPBT_IN_DISCONNECT 0x04 -+ -+#define WLAN_DISABLE_COEX_IN_ROAM 0x10 /* default */ -+#define WLAN_KEEP_COEX_IN_ROAM 0x20 -+#define WLAN_STOMPBT_IN_ROAM 0x40 -+ -+#define WLAN_DISABLE_COEX_IN_SCAN 0x100 /* default */ -+#define WLAN_KEEP_COEX_IN_SCAN 0x200 -+#define WLAN_STOMPBT_IN_SCAN 0x400 -+ -+#define WLAN_DISABLE_COEX_BT_OFF 0x1000 /* default */ -+#define WLAN_KEEP_COEX_BT_OFF 0x2000 -+#define WLAN_STOMPBT_BT_OFF 0x4000 -+ -+typedef PREPACK struct { -+ A_UINT32 period; -+ A_UINT32 dutycycle; -+ A_UINT8 stompbt; -+ A_UINT8 policy; -+} POSTPACK WLAN_PROTECT_POLICY_TYPE; -+ -+typedef PREPACK struct { -+ PREPACK union { -+ WLAN_PROTECT_POLICY_TYPE protectParams; -+ A_UINT16 wlanCtrlFlags; -+ } POSTPACK info; -+ A_UINT8 paramType; -+} POSTPACK BT_PARAMS_MISC; -+ -+typedef PREPACK struct { -+ PREPACK union { -+ BT_PARAMS_SCO scoParams; -+ BT_PARAMS_A2DP a2dpParams; -+ BT_PARAMS_MISC miscParams; -+ BT_COEX_REGS regs; -+ } POSTPACK info; -+ A_UINT8 paramType; -+} POSTPACK WMI_SET_BT_PARAMS_CMD; -+ -+/* -+ * Command Replies -+ */ -+ -+/* -+ * WMI_GET_CHANNEL_LIST_CMDID reply -+ */ -+typedef PREPACK struct { -+ A_UINT8 reserved1; -+ A_UINT8 numChannels; /* number of channels in reply */ -+ A_UINT16 channelList[1]; /* channel in Mhz */ -+} POSTPACK WMI_CHANNEL_LIST_REPLY; -+ -+typedef enum { -+ A_SUCCEEDED = A_OK, -+ A_FAILED_DELETE_STREAM_DOESNOT_EXIST=250, -+ A_SUCCEEDED_MODIFY_STREAM=251, -+ A_FAILED_INVALID_STREAM = 252, -+ A_FAILED_MAX_THINSTREAMS = 253, -+ A_FAILED_CREATE_REMOVE_PSTREAM_FIRST = 254, -+} PSTREAM_REPLY_STATUS; -+ -+/* -+ * List of Events (target to host) -+ */ -+typedef enum { -+ WMI_READY_EVENTID = 0x1001, -+ WMI_CONNECT_EVENTID, -+ WMI_DISCONNECT_EVENTID, -+ WMI_BSSINFO_EVENTID, -+ WMI_CMDERROR_EVENTID, -+ WMI_REGDOMAIN_EVENTID, -+ WMI_PSTREAM_TIMEOUT_EVENTID, -+ WMI_NEIGHBOR_REPORT_EVENTID, -+ WMI_TKIP_MICERR_EVENTID, -+ WMI_SCAN_COMPLETE_EVENTID, -+ WMI_REPORT_STATISTICS_EVENTID, -+ WMI_RSSI_THRESHOLD_EVENTID, -+ WMI_ERROR_REPORT_EVENTID, -+ WMI_OPT_RX_FRAME_EVENTID, -+ WMI_REPORT_ROAM_TBL_EVENTID, -+ WMI_EXTENSION_EVENTID, -+ WMI_CAC_EVENTID, -+ WMI_SNR_THRESHOLD_EVENTID, -+ WMI_LQ_THRESHOLD_EVENTID, -+ WMI_TX_RETRY_ERR_EVENTID, -+ WMI_REPORT_ROAM_DATA_EVENTID, -+ WMI_TEST_EVENTID, -+ WMI_APLIST_EVENTID, -+ WMI_GET_WOW_LIST_EVENTID, -+ WMI_GET_PMKID_LIST_EVENTID -+} WMI_EVENT_ID; -+ -+typedef enum { -+ WMI_11A_CAPABILITY = 1, -+ WMI_11G_CAPABILITY = 2, -+ WMI_11AG_CAPABILITY = 3, -+} WMI_PHY_CAPABILITY; -+ -+typedef PREPACK struct { -+ A_UINT8 macaddr[ATH_MAC_LEN]; -+ A_UINT8 phyCapability; /* WMI_PHY_CAPABILITY */ -+} POSTPACK WMI_READY_EVENT; -+ -+/* -+ * Connect Event -+ */ -+typedef PREPACK struct { -+ A_UINT16 channel; -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_UINT16 listenInterval; -+ A_UINT16 beaconInterval; -+ A_UINT32 networkType; -+ A_UINT8 beaconIeLen; -+ A_UINT8 assocReqLen; -+ A_UINT8 assocRespLen; -+ A_UINT8 assocInfo[1]; -+} POSTPACK WMI_CONNECT_EVENT; -+ -+/* -+ * Disconnect Event -+ */ -+typedef enum { -+ NO_NETWORK_AVAIL = 0x01, -+ LOST_LINK = 0x02, /* bmiss */ -+ DISCONNECT_CMD = 0x03, -+ BSS_DISCONNECTED = 0x04, -+ AUTH_FAILED = 0x05, -+ ASSOC_FAILED = 0x06, -+ NO_RESOURCES_AVAIL = 0x07, -+ CSERV_DISCONNECT = 0x08, -+ INVALID_PROFILE = 0x0a, -+ DOT11H_CHANNEL_SWITCH = 0x0b, -+} WMI_DISCONNECT_REASON; -+ -+typedef PREPACK struct { -+ A_UINT16 protocolReasonStatus; /* reason code, see 802.11 spec. */ -+ A_UINT8 bssid[ATH_MAC_LEN]; /* set if known */ -+ A_UINT8 disconnectReason ; /* see WMI_DISCONNECT_REASON */ -+ A_UINT8 assocRespLen; -+ A_UINT8 assocInfo[1]; -+} POSTPACK WMI_DISCONNECT_EVENT; -+ -+/* -+ * BSS Info Event. -+ * Mechanism used to inform host of the presence and characteristic of -+ * wireless networks present. Consists of bss info header followed by -+ * the beacon or probe-response frame body. The 802.11 header is not included. -+ */ -+typedef enum { -+ BEACON_FTYPE = 0x1, -+ PROBERESP_FTYPE, -+ ACTION_MGMT_FTYPE, -+} WMI_BI_FTYPE; -+ -+enum { -+ BSS_ELEMID_CHANSWITCH = 0x01, -+ BSS_ELEMID_ATHEROS = 0x02, -+}; -+ -+typedef PREPACK struct { -+ A_UINT16 channel; -+ A_UINT8 frameType; /* see WMI_BI_FTYPE */ -+ A_UINT8 snr; -+ A_INT16 rssi; -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_UINT32 ieMask; -+} POSTPACK WMI_BSS_INFO_HDR; -+ -+/* -+ * Command Error Event -+ */ -+typedef enum { -+ INVALID_PARAM = 0x01, -+ ILLEGAL_STATE = 0x02, -+ INTERNAL_ERROR = 0x03, -+} WMI_ERROR_CODE; -+ -+typedef PREPACK struct { -+ A_UINT16 commandId; -+ A_UINT8 errorCode; -+} POSTPACK WMI_CMD_ERROR_EVENT; -+ -+/* -+ * New Regulatory Domain Event -+ */ -+typedef PREPACK struct { -+ A_UINT32 regDomain; -+} POSTPACK WMI_REG_DOMAIN_EVENT; -+ -+typedef PREPACK struct { -+ A_UINT8 trafficClass; -+} POSTPACK WMI_PSTREAM_TIMEOUT_EVENT; -+ -+/* -+ * The WMI_NEIGHBOR_REPORT Event is generated by the target to inform -+ * the host of BSS's it has found that matches the current profile. -+ * It can be used by the host to cache PMKs and/to initiate pre-authentication -+ * if the BSS supports it. The first bssid is always the current associated -+ * BSS. -+ * The bssid and bssFlags information repeats according to the number -+ * or APs reported. -+ */ -+typedef enum { -+ WMI_DEFAULT_BSS_FLAGS = 0x00, -+ WMI_PREAUTH_CAPABLE_BSS = 0x01, -+ WMI_PMKID_VALID_BSS = 0x02, -+} WMI_BSS_FLAGS; -+ -+typedef PREPACK struct { -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_UINT8 bssFlags; /* see WMI_BSS_FLAGS */ -+} POSTPACK WMI_NEIGHBOR_INFO; -+ -+typedef PREPACK struct { -+ A_INT8 numberOfAps; -+ WMI_NEIGHBOR_INFO neighbor[1]; -+} POSTPACK WMI_NEIGHBOR_REPORT_EVENT; -+ -+/* -+ * TKIP MIC Error Event -+ */ -+typedef PREPACK struct { -+ A_UINT8 keyid; -+ A_UINT8 ismcast; -+} POSTPACK WMI_TKIP_MICERR_EVENT; -+ -+/* -+ * WMI_SCAN_COMPLETE_EVENTID - no parameters (old), staus parameter (new) -+ */ -+typedef PREPACK struct { -+ A_STATUS status; -+} POSTPACK WMI_SCAN_COMPLETE_EVENT; -+ -+#define MAX_OPT_DATA_LEN 1400 -+ -+/* -+ * WMI_SET_ADHOC_BSSID_CMDID -+ */ -+typedef PREPACK struct { -+ A_UINT8 bssid[ATH_MAC_LEN]; -+} POSTPACK WMI_SET_ADHOC_BSSID_CMD; -+ -+/* -+ * WMI_SET_OPT_MODE_CMDID -+ */ -+typedef enum { -+ SPECIAL_OFF, -+ SPECIAL_ON, -+} OPT_MODE_TYPE; -+ -+typedef PREPACK struct { -+ A_UINT8 optMode; -+} POSTPACK WMI_SET_OPT_MODE_CMD; -+ -+/* -+ * WMI_TX_OPT_FRAME_CMDID -+ */ -+typedef enum { -+ OPT_PROBE_REQ = 0x01, -+ OPT_PROBE_RESP = 0x02, -+ OPT_CPPP_START = 0x03, -+ OPT_CPPP_STOP = 0x04, -+} WMI_OPT_FTYPE; -+ -+typedef PREPACK struct { -+ A_UINT16 optIEDataLen; -+ A_UINT8 frmType; -+ A_UINT8 dstAddr[ATH_MAC_LEN]; -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_UINT8 reserved; /* For alignment */ -+ A_UINT8 optIEData[1]; -+} POSTPACK WMI_OPT_TX_FRAME_CMD; -+ -+/* -+ * Special frame receive Event. -+ * Mechanism used to inform host of the receiption of the special frames. -+ * Consists of special frame info header followed by special frame body. -+ * The 802.11 header is not included. -+ */ -+typedef PREPACK struct { -+ A_UINT16 channel; -+ A_UINT8 frameType; /* see WMI_OPT_FTYPE */ -+ A_INT8 snr; -+ A_UINT8 srcAddr[ATH_MAC_LEN]; -+ A_UINT8 bssid[ATH_MAC_LEN]; -+} POSTPACK WMI_OPT_RX_INFO_HDR; -+ -+/* -+ * Reporting statistics. -+ */ -+typedef PREPACK struct { -+ A_UINT32 tx_packets; -+ A_UINT32 tx_bytes; -+ A_UINT32 tx_unicast_pkts; -+ A_UINT32 tx_unicast_bytes; -+ A_UINT32 tx_multicast_pkts; -+ A_UINT32 tx_multicast_bytes; -+ A_UINT32 tx_broadcast_pkts; -+ A_UINT32 tx_broadcast_bytes; -+ A_UINT32 tx_rts_success_cnt; -+ A_UINT32 tx_packet_per_ac[4]; -+ A_UINT32 tx_errors_per_ac[4]; -+ -+ A_UINT32 tx_errors; -+ A_UINT32 tx_failed_cnt; -+ A_UINT32 tx_retry_cnt; -+ A_UINT32 tx_rts_fail_cnt; -+ A_INT32 tx_unicast_rate; -+}POSTPACK tx_stats_t; -+ -+typedef PREPACK struct { -+ A_UINT32 rx_packets; -+ A_UINT32 rx_bytes; -+ A_UINT32 rx_unicast_pkts; -+ A_UINT32 rx_unicast_bytes; -+ A_UINT32 rx_multicast_pkts; -+ A_UINT32 rx_multicast_bytes; -+ A_UINT32 rx_broadcast_pkts; -+ A_UINT32 rx_broadcast_bytes; -+ A_UINT32 rx_fragment_pkt; -+ -+ A_UINT32 rx_errors; -+ A_UINT32 rx_crcerr; -+ A_UINT32 rx_key_cache_miss; -+ A_UINT32 rx_decrypt_err; -+ A_UINT32 rx_duplicate_frames; -+ A_INT32 rx_unicast_rate; -+}POSTPACK rx_stats_t; -+ -+typedef PREPACK struct { -+ A_UINT32 tkip_local_mic_failure; -+ A_UINT32 tkip_counter_measures_invoked; -+ A_UINT32 tkip_replays; -+ A_UINT32 tkip_format_errors; -+ A_UINT32 ccmp_format_errors; -+ A_UINT32 ccmp_replays; -+}POSTPACK tkip_ccmp_stats_t; -+ -+typedef PREPACK struct { -+ A_UINT32 power_save_failure_cnt; -+}POSTPACK pm_stats_t; -+ -+typedef PREPACK struct { -+ A_UINT32 cs_bmiss_cnt; -+ A_UINT32 cs_lowRssi_cnt; -+ A_UINT16 cs_connect_cnt; -+ A_UINT16 cs_disconnect_cnt; -+ A_INT16 cs_aveBeacon_rssi; -+ A_UINT16 cs_roam_count; -+ A_UINT16 cs_rssi; -+ A_UINT8 cs_snr; -+ A_UINT8 cs_aveBeacon_snr; -+ A_UINT8 cs_lastRoam_msec; -+} POSTPACK cserv_stats_t; -+ -+typedef PREPACK struct { -+ tx_stats_t tx_stats; -+ rx_stats_t rx_stats; -+ tkip_ccmp_stats_t tkipCcmpStats; -+}POSTPACK wlan_net_stats_t; -+ -+typedef PREPACK struct { -+ A_UINT32 wow_num_pkts_dropped; -+ A_UINT16 wow_num_events_discarded; -+ A_UINT8 wow_num_host_pkt_wakeups; -+ A_UINT8 wow_num_host_event_wakeups; -+} POSTPACK wlan_wow_stats_t; -+ -+typedef PREPACK struct { -+ A_UINT32 lqVal; -+ A_INT32 noise_floor_calibation; -+ pm_stats_t pmStats; -+ wlan_net_stats_t txrxStats; -+ wlan_wow_stats_t wowStats; -+ cserv_stats_t cservStats; -+} POSTPACK WMI_TARGET_STATS; -+ -+/* -+ * WMI_RSSI_THRESHOLD_EVENTID. -+ * Indicate the RSSI events to host. Events are indicated when we breach a -+ * thresold value. -+ */ -+typedef enum{ -+ WMI_RSSI_THRESHOLD1_ABOVE = 0, -+ WMI_RSSI_THRESHOLD2_ABOVE, -+ WMI_RSSI_THRESHOLD3_ABOVE, -+ WMI_RSSI_THRESHOLD4_ABOVE, -+ WMI_RSSI_THRESHOLD5_ABOVE, -+ WMI_RSSI_THRESHOLD6_ABOVE, -+ WMI_RSSI_THRESHOLD1_BELOW, -+ WMI_RSSI_THRESHOLD2_BELOW, -+ WMI_RSSI_THRESHOLD3_BELOW, -+ WMI_RSSI_THRESHOLD4_BELOW, -+ WMI_RSSI_THRESHOLD5_BELOW, -+ WMI_RSSI_THRESHOLD6_BELOW -+}WMI_RSSI_THRESHOLD_VAL; -+ -+typedef PREPACK struct { -+ A_INT16 rssi; -+ A_UINT8 range; -+}POSTPACK WMI_RSSI_THRESHOLD_EVENT; -+ -+/* -+ * WMI_ERROR_REPORT_EVENTID -+ */ -+typedef enum{ -+ WMI_TARGET_PM_ERR_FAIL = 0x00000001, -+ WMI_TARGET_KEY_NOT_FOUND = 0x00000002, -+ WMI_TARGET_DECRYPTION_ERR = 0x00000004, -+ WMI_TARGET_BMISS = 0x00000008, -+ WMI_PSDISABLE_NODE_JOIN = 0x00000010, -+ WMI_TARGET_COM_ERR = 0x00000020, -+ WMI_TARGET_FATAL_ERR = 0x00000040 -+} WMI_TARGET_ERROR_VAL; -+ -+typedef PREPACK struct { -+ A_UINT32 errorVal; -+}POSTPACK WMI_TARGET_ERROR_REPORT_EVENT; -+ -+typedef PREPACK struct { -+ A_UINT8 retrys; -+}POSTPACK WMI_TX_RETRY_ERR_EVENT; -+ -+typedef enum{ -+ WMI_SNR_THRESHOLD1_ABOVE = 1, -+ WMI_SNR_THRESHOLD1_BELOW, -+ WMI_SNR_THRESHOLD2_ABOVE, -+ WMI_SNR_THRESHOLD2_BELOW, -+ WMI_SNR_THRESHOLD3_ABOVE, -+ WMI_SNR_THRESHOLD3_BELOW, -+ WMI_SNR_THRESHOLD4_ABOVE, -+ WMI_SNR_THRESHOLD4_BELOW -+} WMI_SNR_THRESHOLD_VAL; -+ -+typedef PREPACK struct { -+ A_UINT8 range; /* WMI_SNR_THRESHOLD_VAL */ -+ A_UINT8 snr; -+}POSTPACK WMI_SNR_THRESHOLD_EVENT; -+ -+typedef enum{ -+ WMI_LQ_THRESHOLD1_ABOVE = 1, -+ WMI_LQ_THRESHOLD1_BELOW, -+ WMI_LQ_THRESHOLD2_ABOVE, -+ WMI_LQ_THRESHOLD2_BELOW, -+ WMI_LQ_THRESHOLD3_ABOVE, -+ WMI_LQ_THRESHOLD3_BELOW, -+ WMI_LQ_THRESHOLD4_ABOVE, -+ WMI_LQ_THRESHOLD4_BELOW -+} WMI_LQ_THRESHOLD_VAL; -+ -+typedef PREPACK struct { -+ A_INT32 lq; -+ A_UINT8 range; /* WMI_LQ_THRESHOLD_VAL */ -+}POSTPACK WMI_LQ_THRESHOLD_EVENT; -+/* -+ * WMI_REPORT_ROAM_TBL_EVENTID -+ */ -+#define MAX_ROAM_TBL_CAND 5 -+ -+typedef PREPACK struct { -+ A_INT32 roam_util; -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_INT8 rssi; -+ A_INT8 rssidt; -+ A_INT8 last_rssi; -+ A_INT8 util; -+ A_INT8 bias; -+ A_UINT8 reserved; /* For alignment */ -+} POSTPACK WMI_BSS_ROAM_INFO; -+ -+ -+typedef PREPACK struct { -+ A_UINT16 roamMode; -+ A_UINT16 numEntries; -+ WMI_BSS_ROAM_INFO bssRoamInfo[1]; -+} POSTPACK WMI_TARGET_ROAM_TBL; -+ -+/* -+ * WMI_CAC_EVENTID -+ */ -+typedef enum { -+ CAC_INDICATION_ADMISSION = 0x00, -+ CAC_INDICATION_ADMISSION_RESP = 0x01, -+ CAC_INDICATION_DELETE = 0x02, -+ CAC_INDICATION_NO_RESP = 0x03, -+}CAC_INDICATION; -+ -+#define WMM_TSPEC_IE_LEN 63 -+ -+typedef PREPACK struct { -+ A_UINT8 ac; -+ A_UINT8 cac_indication; -+ A_UINT8 statusCode; -+ A_UINT8 tspecSuggestion[WMM_TSPEC_IE_LEN]; -+}POSTPACK WMI_CAC_EVENT; -+ -+/* -+ * WMI_APLIST_EVENTID -+ */ -+ -+typedef enum { -+ APLIST_VER1 = 1, -+} APLIST_VER; -+ -+typedef PREPACK struct { -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_UINT16 channel; -+} POSTPACK WMI_AP_INFO_V1; -+ -+typedef PREPACK union { -+ WMI_AP_INFO_V1 apInfoV1; -+} POSTPACK WMI_AP_INFO; -+ -+typedef PREPACK struct { -+ A_UINT8 apListVer; -+ A_UINT8 numAP; -+ WMI_AP_INFO apList[1]; -+} POSTPACK WMI_APLIST_EVENT; -+ -+/* -+ * developer commands -+ */ -+ -+/* -+ * WMI_SET_BITRATE_CMDID -+ * -+ * Get bit rate cmd uses same definition as set bit rate cmd -+ */ -+typedef enum { -+ RATE_AUTO = -1, -+ RATE_1Mb = 0, -+ RATE_2Mb = 1, -+ RATE_5_5Mb = 2, -+ RATE_11Mb = 3, -+ RATE_6Mb = 4, -+ RATE_9Mb = 5, -+ RATE_12Mb = 6, -+ RATE_18Mb = 7, -+ RATE_24Mb = 8, -+ RATE_36Mb = 9, -+ RATE_48Mb = 10, -+ RATE_54Mb = 11, -+} WMI_BIT_RATE; -+ -+typedef PREPACK struct { -+ A_INT8 rateIndex; /* see WMI_BIT_RATE */ -+} POSTPACK WMI_BIT_RATE_CMD, WMI_BIT_RATE_REPLY; -+ -+/* -+ * WMI_SET_FIXRATES_CMDID -+ * -+ * Get fix rates cmd uses same definition as set fix rates cmd -+ */ -+typedef enum { -+ FIX_RATE_1Mb = 0x1, -+ FIX_RATE_2Mb = 0x2, -+ FIX_RATE_5_5Mb = 0x4, -+ FIX_RATE_11Mb = 0x8, -+ FIX_RATE_6Mb = 0x10, -+ FIX_RATE_9Mb = 0x20, -+ FIX_RATE_12Mb = 0x40, -+ FIX_RATE_18Mb = 0x80, -+ FIX_RATE_24Mb = 0x100, -+ FIX_RATE_36Mb = 0x200, -+ FIX_RATE_48Mb = 0x400, -+ FIX_RATE_54Mb = 0x800, -+} WMI_FIX_RATES_MASK; -+ -+typedef PREPACK struct { -+ A_UINT16 fixRateMask; /* see WMI_BIT_RATE */ -+} POSTPACK WMI_FIX_RATES_CMD, WMI_FIX_RATES_REPLY; -+ -+/* -+ * WMI_SET_RECONNECT_AUTH_MODE_CMDID -+ * -+ * Set authentication mode -+ */ -+typedef enum { -+ RECONN_DO_AUTH = 0x00, -+ RECONN_NOT_AUTH = 0x01 -+} WMI_AUTH_MODE; -+ -+typedef PREPACK struct { -+ A_UINT8 mode; -+} POSTPACK WMI_SET_AUTH_MODE_CMD; -+ -+/* -+ * WMI_SET_REASSOC_MODE_CMDID -+ * -+ * Set authentication mode -+ */ -+typedef enum { -+ REASSOC_DO_DISASSOC = 0x00, -+ REASSOC_DONOT_DISASSOC = 0x01 -+} WMI_REASSOC_MODE; -+ -+typedef PREPACK struct { -+ A_UINT8 mode; -+}POSTPACK WMI_SET_REASSOC_MODE_CMD; -+ -+typedef enum { -+ ROAM_DATA_TIME = 1, /* Get The Roam Time Data */ -+} ROAM_DATA_TYPE; -+ -+typedef PREPACK struct { -+ A_UINT32 disassoc_time; -+ A_UINT32 no_txrx_time; -+ A_UINT32 assoc_time; -+ A_UINT32 allow_txrx_time; -+ A_UINT32 last_data_txrx_time; -+ A_UINT32 first_data_txrx_time; -+ A_UINT8 disassoc_bssid[ATH_MAC_LEN]; -+ A_INT8 disassoc_bss_rssi; -+ A_UINT8 assoc_bssid[ATH_MAC_LEN]; -+ A_INT8 assoc_bss_rssi; -+} POSTPACK WMI_TARGET_ROAM_TIME; -+ -+typedef PREPACK struct { -+ PREPACK union { -+ WMI_TARGET_ROAM_TIME roamTime; -+ } POSTPACK u; -+ A_UINT8 roamDataType ; -+} POSTPACK WMI_TARGET_ROAM_DATA; -+ -+typedef enum { -+ WMI_WMM_DISABLED = 0, -+ WMI_WMM_ENABLED -+} WMI_WMM_STATUS; -+ -+typedef PREPACK struct { -+ A_UINT8 status; -+}POSTPACK WMI_SET_WMM_CMD; -+ -+typedef enum { -+ WMI_TXOP_DISABLED = 0, -+ WMI_TXOP_ENABLED -+} WMI_TXOP_CFG; -+ -+typedef PREPACK struct { -+ A_UINT8 txopEnable; -+}POSTPACK WMI_SET_WMM_TXOP_CMD; -+ -+typedef PREPACK struct { -+ A_UINT8 keepaliveInterval; -+} POSTPACK WMI_SET_KEEPALIVE_CMD; -+ -+typedef PREPACK struct { -+ A_BOOL configured; -+ A_UINT8 keepaliveInterval; -+} POSTPACK WMI_GET_KEEPALIVE_CMD; -+ -+/* -+ * Add Application specified IE to a management frame -+ */ -+#define WMI_MAX_IE_LEN 78 -+ -+typedef PREPACK struct { -+ A_UINT8 mgmtFrmType; /* one of WMI_MGMT_FRAME_TYPE */ -+ A_UINT8 ieLen; /* Length of the IE that should be added to the MGMT frame */ -+ A_UINT8 ieInfo[1]; -+} POSTPACK WMI_SET_APPIE_CMD; -+ -+/* -+ * Notify the WSC registration status to the target -+ */ -+#define WSC_REG_ACTIVE 1 -+#define WSC_REG_INACTIVE 0 -+/* Generic Hal Interface for setting hal paramters. */ -+/* Add new Set HAL Param cmdIds here for newer params */ -+typedef enum { -+ WHAL_SETCABTO_CMDID = 1, -+}WHAL_CMDID; -+ -+typedef PREPACK struct { -+ A_UINT8 cabTimeOut; -+} POSTPACK WHAL_SETCABTO_PARAM; -+ -+typedef PREPACK struct { -+ A_UINT8 whalCmdId; -+ A_UINT8 data[1]; -+} POSTPACK WHAL_PARAMCMD; -+ -+ -+#define WOW_MAX_FILTER_LISTS 1 /*4*/ -+#define WOW_MAX_FILTERS_PER_LIST 4 -+#define WOW_PATTERN_SIZE 64 -+#define WOW_MASK_SIZE 64 -+ -+typedef PREPACK struct { -+ A_UINT8 wow_valid_filter; -+ A_UINT8 wow_filter_id; -+ A_UINT8 wow_filter_size; -+ A_UINT8 wow_filter_offset; -+ A_UINT8 wow_filter_mask[WOW_MASK_SIZE]; -+ A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE]; -+} POSTPACK WOW_FILTER; -+ -+ -+typedef PREPACK struct { -+ A_UINT8 wow_valid_list; -+ A_UINT8 wow_list_id; -+ A_UINT8 wow_num_filters; -+ A_UINT8 wow_total_list_size; -+ WOW_FILTER list[WOW_MAX_FILTERS_PER_LIST]; -+} POSTPACK WOW_FILTER_LIST; -+ -+typedef PREPACK struct { -+ A_BOOL awake; -+ A_BOOL asleep; -+} POSTPACK WMI_SET_HOST_SLEEP_MODE_CMD; -+ -+typedef PREPACK struct { -+ A_BOOL enable_wow; -+} POSTPACK WMI_SET_WOW_MODE_CMD; -+ -+typedef PREPACK struct { -+ A_UINT8 filter_list_id; -+} POSTPACK WMI_GET_WOW_LIST_CMD; -+ -+/* -+ * WMI_GET_WOW_LIST_CMD reply -+ */ -+typedef PREPACK struct { -+ A_UINT8 num_filters; /* number of patterns in reply */ -+ A_UINT8 this_filter_num; /* this is filter # x of total num_filters */ -+ A_UINT8 wow_mode; -+ A_UINT8 host_mode; -+ WOW_FILTER wow_filters[1]; -+} POSTPACK WMI_GET_WOW_LIST_REPLY; -+ -+typedef PREPACK struct { -+ A_UINT8 filter_list_id; -+ A_UINT8 filter_size; -+ A_UINT8 filter_offset; -+ A_UINT8 filter[1]; -+} POSTPACK WMI_ADD_WOW_PATTERN_CMD; -+ -+typedef PREPACK struct { -+ A_UINT16 filter_list_id; -+ A_UINT16 filter_id; -+} POSTPACK WMI_DEL_WOW_PATTERN_CMD; -+ -+typedef PREPACK struct { -+ A_UINT8 macaddr[ATH_MAC_LEN]; -+} POSTPACK WMI_SET_MAC_ADDRESS_CMD; -+ -+/* -+ * WMI_SET_AKMP_PARAMS_CMD -+ */ -+ -+#define WMI_AKMP_MULTI_PMKID_EN 0x000001 -+ -+typedef PREPACK struct { -+ A_UINT32 akmpInfo; -+} POSTPACK WMI_SET_AKMP_PARAMS_CMD; -+ -+typedef PREPACK struct { -+ A_UINT8 pmkid[WMI_PMKID_LEN]; -+} POSTPACK WMI_PMKID; -+ -+/* -+ * WMI_SET_PMKID_LIST_CMD -+ */ -+#define WMI_MAX_PMKID_CACHE 8 -+ -+typedef PREPACK struct { -+ A_UINT32 numPMKID; -+ WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE]; -+} POSTPACK WMI_SET_PMKID_LIST_CMD; -+ -+/* -+ * WMI_GET_PMKID_LIST_CMD Reply -+ * Following the Number of PMKIDs is the list of PMKIDs -+ */ -+typedef PREPACK struct { -+ A_UINT32 numPMKID; -+ WMI_PMKID pmkidList[1]; -+} POSTPACK WMI_PMKID_LIST_REPLY; -+ -+/* index used for priority streams */ -+typedef enum { -+ WMI_NOT_MAPPED = -1, -+ WMI_CONTROL_PRI = 0, -+ WMI_BEST_EFFORT_PRI = 1, -+ WMI_LOW_PRI = 2, -+ WMI_HIGH_PRI = 3, -+ WMI_HIGHEST_PRI, -+ WMI_PRI_MAX_COUNT -+} WMI_PRI_STREAM_ID; -+ -+#ifndef ATH_TARGET -+#include "athendpack.h" -+#endif -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _WMI_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wmix.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/include/wmix.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,233 @@ -+/* -+ * Copyright (c) 2004-2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * $ATH_LICENSE_HOSTSDK0_C$ -+ * -+ * This file contains extensions of the WMI protocol specified in the -+ * Wireless Module Interface (WMI). It includes definitions of all -+ * extended commands and events. Extensions include useful commands -+ * that are not directly related to wireless activities. They may -+ * be hardware-specific, and they might not be supported on all -+ * implementations. -+ * -+ * Extended WMIX commands are encapsulated in a WMI message with -+ * cmd=WMI_EXTENSION_CMD. -+ * -+ */ -+ -+#ifndef _WMIX_H_ -+#define _WMIX_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#ifndef ATH_TARGET -+#include "athstartpack.h" -+#endif -+ -+#include "dbglog.h" -+ -+/* -+ * Extended WMI commands are those that are needed during wireless -+ * operation, but which are not really wireless commands. This allows, -+ * for instance, platform-specific commands. Extended WMI commands are -+ * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID. -+ * Extended WMI events are similarly embedded in a WMI event message with -+ * WMI_EVENT_ID=WMI_EXTENSION_EVENTID. -+ */ -+typedef PREPACK struct { -+ A_UINT32 commandId; -+} POSTPACK WMIX_CMD_HDR; -+ -+typedef enum { -+ WMIX_DSETOPEN_REPLY_CMDID = 0x2001, -+ WMIX_DSETDATA_REPLY_CMDID, -+ WMIX_GPIO_OUTPUT_SET_CMDID, -+ WMIX_GPIO_INPUT_GET_CMDID, -+ WMIX_GPIO_REGISTER_SET_CMDID, -+ WMIX_GPIO_REGISTER_GET_CMDID, -+ WMIX_GPIO_INTR_ACK_CMDID, -+ WMIX_HB_CHALLENGE_RESP_CMDID, -+ WMIX_DBGLOG_CFG_MODULE_CMDID, -+} WMIX_COMMAND_ID; -+ -+typedef enum { -+ WMIX_DSETOPENREQ_EVENTID = 0x3001, -+ WMIX_DSETCLOSE_EVENTID, -+ WMIX_DSETDATAREQ_EVENTID, -+ WMIX_GPIO_INTR_EVENTID, -+ WMIX_GPIO_DATA_EVENTID, -+ WMIX_GPIO_ACK_EVENTID, -+ WMIX_HB_CHALLENGE_RESP_EVENTID, -+ WMIX_DBGLOG_EVENTID, -+} WMIX_EVENT_ID; -+ -+/* -+ * =============DataSet support================= -+ */ -+ -+/* -+ * WMIX_DSETOPENREQ_EVENTID -+ * DataSet Open Request Event -+ */ -+typedef PREPACK struct { -+ A_UINT32 dset_id; -+ A_UINT32 targ_dset_handle; /* echo'ed, not used by Host, */ -+ A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */ -+ A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */ -+} POSTPACK WMIX_DSETOPENREQ_EVENT; -+ -+/* -+ * WMIX_DSETCLOSE_EVENTID -+ * DataSet Close Event -+ */ -+typedef PREPACK struct { -+ A_UINT32 access_cookie; -+} POSTPACK WMIX_DSETCLOSE_EVENT; -+ -+/* -+ * WMIX_DSETDATAREQ_EVENTID -+ * DataSet Data Request Event -+ */ -+typedef PREPACK struct { -+ A_UINT32 access_cookie; -+ A_UINT32 offset; -+ A_UINT32 length; -+ A_UINT32 targ_buf; /* echo'ed, not used by Host, */ -+ A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */ -+ A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */ -+} POSTPACK WMIX_DSETDATAREQ_EVENT; -+ -+typedef PREPACK struct { -+ A_UINT32 status; -+ A_UINT32 targ_dset_handle; -+ A_UINT32 targ_reply_fn; -+ A_UINT32 targ_reply_arg; -+ A_UINT32 access_cookie; -+ A_UINT32 size; -+ A_UINT32 version; -+} POSTPACK WMIX_DSETOPEN_REPLY_CMD; -+ -+typedef PREPACK struct { -+ A_UINT32 status; -+ A_UINT32 targ_buf; -+ A_UINT32 targ_reply_fn; -+ A_UINT32 targ_reply_arg; -+ A_UINT32 length; -+ A_UINT8 buf[1]; -+} POSTPACK WMIX_DSETDATA_REPLY_CMD; -+ -+ -+/* -+ * =============GPIO support================= -+ * All masks are 18-bit masks with bit N operating on GPIO pin N. -+ */ -+ -+#include "gpio.h" -+ -+/* -+ * Set GPIO pin output state. -+ * In order for output to be driven, a pin must be enabled for output. -+ * This can be done during initialization through the GPIO Configuration -+ * DataSet, or during operation with the enable_mask. -+ * -+ * If a request is made to simultaneously set/clear or set/disable or -+ * clear/disable or disable/enable, results are undefined. -+ */ -+typedef PREPACK struct { -+ A_UINT32 set_mask; /* pins to set */ -+ A_UINT32 clear_mask; /* pins to clear */ -+ A_UINT32 enable_mask; /* pins to enable for output */ -+ A_UINT32 disable_mask; /* pins to disable/tristate */ -+} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD; -+ -+/* -+ * Set a GPIO register. For debug/exceptional cases. -+ * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a -+ * platform-dependent header. -+ */ -+typedef PREPACK struct { -+ A_UINT32 gpioreg_id; /* GPIO register ID */ -+ A_UINT32 value; /* value to write */ -+} POSTPACK WMIX_GPIO_REGISTER_SET_CMD; -+ -+/* Get a GPIO register. For debug/exceptional cases. */ -+typedef PREPACK struct { -+ A_UINT32 gpioreg_id; /* GPIO register to read */ -+} POSTPACK WMIX_GPIO_REGISTER_GET_CMD; -+ -+/* -+ * Host acknowledges and re-arms GPIO interrupts. A single -+ * message should be used to acknowledge all interrupts that -+ * were delivered in an earlier WMIX_GPIO_INTR_EVENT message. -+ */ -+typedef PREPACK struct { -+ A_UINT32 ack_mask; /* interrupts to acknowledge */ -+} POSTPACK WMIX_GPIO_INTR_ACK_CMD; -+ -+/* -+ * Target informs Host of GPIO interrupts that have ocurred since the -+ * last WMIX_GIPO_INTR_ACK_CMD was received. Additional information -- -+ * the current GPIO input values is provided -- in order to support -+ * use of a GPIO interrupt as a Data Valid signal for other GPIO pins. -+ */ -+typedef PREPACK struct { -+ A_UINT32 intr_mask; /* pending GPIO interrupts */ -+ A_UINT32 input_values; /* recent GPIO input values */ -+} POSTPACK WMIX_GPIO_INTR_EVENT; -+ -+/* -+ * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request -+ * using a GPIO_DATA_EVENT with -+ * value set to the mask of GPIO pin inputs and -+ * reg_id set to GPIO_ID_NONE -+ * -+ * -+ * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request -+ * using a GPIO_DATA_EVENT with -+ * value set to the value of the requested register and -+ * reg_id identifying the register (reflects the original request) -+ * NB: reg_id supports the future possibility of unsolicited -+ * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may -+ * simplify Host GPIO support. -+ */ -+typedef PREPACK struct { -+ A_UINT32 value; -+ A_UINT32 reg_id; -+} POSTPACK WMIX_GPIO_DATA_EVENT; -+ -+/* -+ * =============Error Detection support================= -+ */ -+ -+/* -+ * WMIX_HB_CHALLENGE_RESP_CMDID -+ * Heartbeat Challenge Response command -+ */ -+typedef PREPACK struct { -+ A_UINT32 cookie; -+ A_UINT32 source; -+} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD; -+ -+/* -+ * WMIX_HB_CHALLENGE_RESP_EVENTID -+ * Heartbeat Challenge Response Event -+ */ -+#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD -+ -+typedef PREPACK struct { -+ struct dbglog_config_s config; -+} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD; -+ -+#ifndef ATH_TARGET -+#include "athendpack.h" -+#endif -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _WMIX_H_ */ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/Makefile 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,38 @@ -+REV ?= 2 -+ -+PWD := $(shell pwd) -+ -+EXTRA_CFLAGS += -I$(src)/include -+ -+EXTRA_CFLAGS += -DLINUX -D__KERNEL__ -DHTC_RAW_INTERFACE\ -+ -DTCMD -DUSER_KEYS \ -+ -DNO_SYNC_FLUSH #\ -+ -DMULTIPLE_FRAMES_PER_INTERRUPT -DAR6000REV$(REV) \ -+ -DBLOCK_TX_PATH_FLAG \ -+ -DSDIO \ -+ -+EXTRA_CFLAGS += -DKERNEL_2_6 -+ -+obj-$(CONFIG_SDIO_AR6000_WLAN) += ar6000.o -+ -+ar6000-objs += htc/ar6k.o \ -+ htc/ar6k_events.o \ -+ htc/htc_send.o \ -+ htc/htc_recv.o \ -+ htc/htc_services.o \ -+ htc/htc.o \ -+ hif/hif.o \ -+ bmi/bmi.o \ -+ ar6000/ar6000_drv.o \ -+ ar6000/ar6000_raw_if.o \ -+ ar6000/netbuf.o \ -+ ar6000/wireless_ext.o \ -+ ar6000/ioctl.o \ -+ miscdrv/common_drv.o \ -+ miscdrv/credit_dist.o \ -+ wmi/wmi.o \ -+ wlan/wlan_node.o \ -+ wlan/wlan_recv_beacon.o \ -+ wlan/wlan_utils.o -+ -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/miscdrv/common_drv.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/miscdrv/common_drv.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,467 @@ -+ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "AR6Khwreg.h" -+#include "targaddrs.h" -+#include "a_osapi.h" -+#include "hif.h" -+#include "htc_api.h" -+#include "bmi.h" -+#include "bmi_msg.h" -+#include "common_drv.h" -+#include "a_debug.h" -+#include "targaddrs.h" -+ -+#define HOST_INTEREST_ITEM_ADDRESS(target, item) \ -+(((TargetType) == TARGET_TYPE_AR6001) ? \ -+ AR6001_HOST_INTEREST_ITEM_ADDRESS(item) : \ -+ AR6002_HOST_INTEREST_ITEM_ADDRESS(item)) -+ -+ -+/* Compile the 4BYTE version of the window register setup routine, -+ * This mitigates host interconnect issues with non-4byte aligned bus requests, some -+ * interconnects use bus adapters that impose strict limitations. -+ * Since diag window access is not intended for performance critical operations, the 4byte mode should -+ * be satisfactory even though it generates 4X the bus activity. */ -+ -+#ifdef USE_4BYTE_REGISTER_ACCESS -+ -+ /* set the window address register (using 4-byte register access ). */ -+A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address) -+{ -+ A_STATUS status; -+ A_UINT8 addrValue[4]; -+ int i; -+ -+ /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written -+ * last to initiate the access cycle */ -+ -+ for (i = 1; i <= 3; i++) { -+ /* fill the buffer with the address byte value we want to hit 4 times*/ -+ addrValue[0] = ((A_UINT8 *)&Address)[i]; -+ addrValue[1] = addrValue[0]; -+ addrValue[2] = addrValue[0]; -+ addrValue[3] = addrValue[0]; -+ -+ /* hit each byte of the register address with a 4-byte write operation to the same address, -+ * this is a harmless operation */ -+ status = HIFReadWrite(hifDevice, -+ RegisterAddr+i, -+ addrValue, -+ 4, -+ HIF_WR_SYNC_BYTE_FIX, -+ NULL); -+ if (status != A_OK) { -+ break; -+ } -+ } -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n", -+ RegisterAddr, Address)); -+ return status; -+ } -+ -+ /* write the address register again, this time write the whole 4-byte value. -+ * The effect here is that the LSB write causes the cycle to start, the extra -+ * 3 byte write to bytes 1,2,3 has no effect since we are writing the same values again */ -+ status = HIFReadWrite(hifDevice, -+ RegisterAddr, -+ (A_UCHAR *)(&Address), -+ 4, -+ HIF_WR_SYNC_BYTE_INC, -+ NULL); -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n", -+ RegisterAddr, Address)); -+ return status; -+ } -+ -+ return A_OK; -+ -+ -+ -+} -+ -+ -+#else -+ -+ /* set the window address register */ -+A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address) -+{ -+ A_STATUS status; -+ -+ /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written -+ * last to initiate the access cycle */ -+ status = HIFReadWrite(hifDevice, -+ RegisterAddr+1, /* write upper 3 bytes */ -+ ((A_UCHAR *)(&Address))+1, -+ sizeof(A_UINT32)-1, -+ HIF_WR_SYNC_BYTE_INC, -+ NULL); -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n", -+ RegisterAddr, Address)); -+ return status; -+ } -+ -+ /* write the LSB of the register, this initiates the operation */ -+ status = HIFReadWrite(hifDevice, -+ RegisterAddr, -+ (A_UCHAR *)(&Address), -+ sizeof(A_UINT8), -+ HIF_WR_SYNC_BYTE_INC, -+ NULL); -+ -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n", -+ RegisterAddr, Address)); -+ return status; -+ } -+ -+ return A_OK; -+} -+ -+#endif -+ -+/* -+ * Read from the AR6000 through its diagnostic window. -+ * No cooperation from the Target is required for this. -+ */ -+A_STATUS -+ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data) -+{ -+ A_STATUS status; -+ -+ /* set window register to start read cycle */ -+ status = ar6000_SetAddressWindowRegister(hifDevice, -+ WINDOW_READ_ADDR_ADDRESS, -+ *address); -+ -+ if (status != A_OK) { -+ return status; -+ } -+ -+ /* read the data */ -+ status = HIFReadWrite(hifDevice, -+ WINDOW_DATA_ADDRESS, -+ (A_UCHAR *)data, -+ sizeof(A_UINT32), -+ HIF_RD_SYNC_BYTE_INC, -+ NULL); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot read from WINDOW_DATA_ADDRESS\n")); -+ return status; -+ } -+ -+ return status; -+} -+ -+ -+/* -+ * Write to the AR6000 through its diagnostic window. -+ * No cooperation from the Target is required for this. -+ */ -+A_STATUS -+ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data) -+{ -+ A_STATUS status; -+ -+ /* set write data */ -+ status = HIFReadWrite(hifDevice, -+ WINDOW_DATA_ADDRESS, -+ (A_UCHAR *)data, -+ sizeof(A_UINT32), -+ HIF_WR_SYNC_BYTE_INC, -+ NULL); -+ if (status != A_OK) { -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to WINDOW_DATA_ADDRESS\n", *data)); -+ return status; -+ } -+ -+ /* set window register, which starts the write cycle */ -+ return ar6000_SetAddressWindowRegister(hifDevice, -+ WINDOW_WRITE_ADDR_ADDRESS, -+ *address); -+} -+ -+A_STATUS -+ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, -+ A_UCHAR *data, A_UINT32 length) -+{ -+ A_UINT32 count; -+ A_STATUS status = A_OK; -+ -+ for (count = 0; count < length; count += 4, address += 4) { -+ if ((status = ar6000_ReadRegDiag(hifDevice, &address, -+ (A_UINT32 *)&data[count])) != A_OK) -+ { -+ break; -+ } -+ } -+ -+ return status; -+} -+ -+A_STATUS -+ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, -+ A_UCHAR *data, A_UINT32 length) -+{ -+ A_UINT32 count; -+ A_STATUS status = A_OK; -+ -+ for (count = 0; count < length; count += 4, address += 4) { -+ if ((status = ar6000_WriteRegDiag(hifDevice, &address, -+ (A_UINT32 *)&data[count])) != A_OK) -+ { -+ break; -+ } -+ } -+ -+ return status; -+} -+ -+A_STATUS -+ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice) -+{ -+ int i; -+ struct forceROM_s { -+ A_UINT32 addr; -+ A_UINT32 data; -+ }; -+ struct forceROM_s *ForceROM; -+ int szForceROM; -+ A_UINT32 instruction; -+ -+ static struct forceROM_s ForceROM_REV2[] = { -+ /* NB: This works for old REV2 ROM (old). */ -+ {0x00001ff0, 0x175b0027}, /* jump instruction at 0xa0001ff0 */ -+ {0x00001ff4, 0x00000000}, /* nop instruction at 0xa0001ff4 */ -+ -+ {MC_REMAP_TARGET_ADDRESS, 0x00001ff0}, /* remap to 0xa0001ff0 */ -+ {MC_REMAP_COMPARE_ADDRESS, 0x01000040},/* ...from 0xbfc00040 */ -+ {MC_REMAP_SIZE_ADDRESS, 0x00000000}, /* ...1 cache line */ -+ {MC_REMAP_VALID_ADDRESS, 0x00000001}, /* ...remap is valid */ -+ -+ {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */ -+ -+ {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK}, -+ }; -+ -+ static struct forceROM_s ForceROM_NEW[] = { -+ /* NB: This works for AR6000 ROM REV3 and beyond. */ -+ {LOCAL_SCRATCH_ADDRESS, AR6K_OPTION_IGNORE_FLASH}, -+ {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */ -+ {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK}, -+ }; -+ -+ /* -+ * Examine a semi-arbitrary instruction that's different -+ * in REV2 and other revisions. -+ * NB: If a Host port does not require simultaneous support -+ * for multiple revisions of Target ROM, this code can be elided. -+ */ -+ (void)ar6000_ReadDataDiag(hifDevice, 0x01000040, -+ (A_UCHAR *)&instruction, 4); -+ -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("instruction=0x%x\n", instruction)); -+ -+ if (instruction == 0x3c1aa200) { -+ /* It's an old ROM */ -+ ForceROM = ForceROM_REV2; -+ szForceROM = sizeof(ForceROM_REV2)/sizeof(*ForceROM); -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using OLD method\n")); -+ } else { -+ ForceROM = ForceROM_NEW; -+ szForceROM = sizeof(ForceROM_NEW)/sizeof(*ForceROM); -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using NEW method\n")); -+ } -+ -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Force Target to execute from ROM....\n")); -+ for (i = 0; i < szForceROM; i++) -+ { -+ if (ar6000_WriteRegDiag(hifDevice, -+ &ForceROM[i].addr, -+ &ForceROM[i].data) != A_OK) -+ { -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot force Target to execute ROM!\n")); -+ return A_ERROR; -+ } -+ } -+ -+ A_MDELAY(50); /* delay to allow dragon to come to BMI phase */ -+ return A_OK; -+} -+ -+/* reset device */ -+A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType) -+{ -+ -+#if !defined(DWSIM) -+ A_STATUS status = A_OK; -+ A_UINT32 address; -+ A_UINT32 data; -+ -+ do { -+ -+ // address = RESET_CONTROL_ADDRESS; -+ data = RESET_CONTROL_COLD_RST_MASK; -+ -+ /* Hardcode the address of RESET_CONTROL_ADDRESS based on the target type */ -+ if (TargetType == TARGET_TYPE_AR6001) { -+ address = 0x0C000000; -+ } else { -+ if (TargetType == TARGET_TYPE_AR6002) { -+ address = 0x00004000; -+ } else { -+ A_ASSERT(0); -+ } -+ } -+ -+ status = ar6000_WriteRegDiag(hifDevice, &address, &data); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ /* -+ * Read back the RESET CAUSE register to ensure that the cold reset -+ * went through. -+ */ -+ A_MDELAY(2000); /* 2 second delay to allow things to settle down */ -+ -+ -+ // address = RESET_CAUSE_ADDRESS; -+ /* Hardcode the address of RESET_CAUSE_ADDRESS based on the target type */ -+ if (TargetType == TARGET_TYPE_AR6001) { -+ address = 0x0C0000CC; -+ } else { -+ if (TargetType == TARGET_TYPE_AR6002) { -+ address = 0x000040C0; -+ } else { -+ A_ASSERT(0); -+ } -+ } -+ -+ data = 0; -+ status = ar6000_ReadRegDiag(hifDevice, &address, &data); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Reset Cause readback: 0x%X \n",data)); -+ data &= RESET_CAUSE_LAST_MASK; -+ if (data != 2) { -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Unable to cold reset the target \n")); -+ } -+ -+ } while (FALSE); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Failed to reset target \n")); -+ } -+#endif -+ return A_OK; -+} -+ -+#define REG_DUMP_COUNT_AR6001 38 /* WORDs, derived from AR6001_regdump.h */ -+#define REG_DUMP_COUNT_AR6002 32 /* WORDs, derived from AR6002_regdump.h */ -+ -+ -+#if REG_DUMP_COUNT_AR6001 <= REG_DUMP_COUNT_AR6002 -+#define REGISTER_DUMP_LEN_MAX REG_DUMP_COUNT_AR6002 -+#else -+#define REGISTER_DUMP_LEN_MAX REG_DUMP_COUNT_AR6001 -+#endif -+ -+void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType) -+{ -+ A_UINT32 address; -+ A_UINT32 regDumpArea = 0; -+ A_STATUS status; -+ A_UINT32 regDumpValues[REGISTER_DUMP_LEN_MAX]; -+ A_UINT32 regDumpCount = 0; -+ A_UINT32 i; -+ -+ do { -+ -+ /* the reg dump pointer is copied to the host interest area */ -+ address = HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_failure_state); -+ -+ if (TargetType == TARGET_TYPE_AR6001) { -+ /* for AR6001, this is a fixed location because the ptr is actually stuck in cache, -+ * this may be fixed in later firmware versions */ -+ address = 0x18a0; -+ regDumpCount = REG_DUMP_COUNT_AR6001; -+ -+ } else if (TargetType == TARGET_TYPE_AR6002) { -+ -+ regDumpCount = REG_DUMP_COUNT_AR6002; -+ -+ } else { -+ A_ASSERT(0); -+ } -+ -+ /* read RAM location through diagnostic window */ -+ status = ar6000_ReadRegDiag(hifDevice, &address, ®DumpArea); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get ptr to register dump area \n")); -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Location of register dump data: 0x%X \n",regDumpArea)); -+ -+ if (regDumpArea == 0) { -+ /* no reg dump */ -+ break; -+ } -+ -+ if (TargetType == TARGET_TYPE_AR6001) { -+ regDumpArea &= 0x0FFFFFFF; /* convert to physical address in target memory */ -+ } -+ -+ /* fetch register dump data */ -+ status = ar6000_ReadDataDiag(hifDevice, -+ regDumpArea, -+ (A_UCHAR *)®DumpValues[0], -+ regDumpCount * (sizeof(A_UINT32))); -+ -+ if (A_FAILED(status)) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get register dump \n")); -+ break; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Register Dump: \n")); -+ -+ for (i = 0; i < regDumpCount; i++) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" %d : 0x%8.8X \n",i, regDumpValues[i])); -+ } -+ -+ } while (FALSE); -+ -+} -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/miscdrv/credit_dist.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/miscdrv/credit_dist.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,346 @@ -+ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "a_osapi.h" -+#include "a_debug.h" -+#include "htc_api.h" -+#include "common_drv.h" -+ -+/********* CREDIT DISTRIBUTION FUNCTIONS ******************************************/ -+ -+#define NO_VO_SERVICE 1 /* currently WMI only uses 3 data streams, so we leave VO service inactive */ -+ -+#ifdef NO_VO_SERVICE -+#define DATA_SVCS_USED 3 -+#else -+#define DATA_SVCS_USED 4 -+#endif -+ -+static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, -+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList); -+ -+static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, -+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList); -+ -+/* reduce an ep's credits back to a set limit */ -+static INLINE void ReduceCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, -+ HTC_ENDPOINT_CREDIT_DIST *pEpDist, -+ int Limit) -+{ -+ int credits; -+ -+ /* set the new limit */ -+ pEpDist->TxCreditsAssigned = Limit; -+ -+ if (pEpDist->TxCredits <= Limit) { -+ return; -+ } -+ -+ /* figure out how much to take away */ -+ credits = pEpDist->TxCredits - Limit; -+ /* take them away */ -+ pEpDist->TxCredits -= credits; -+ pCredInfo->CurrentFreeCredits += credits; -+} -+ -+/* give an endpoint some credits from the free credit pool */ -+#define GiveCredits(pCredInfo,pEpDist,credits) \ -+{ \ -+ (pEpDist)->TxCredits += (credits); \ -+ (pEpDist)->TxCreditsAssigned += (credits); \ -+ (pCredInfo)->CurrentFreeCredits -= (credits); \ -+} -+ -+ -+/* default credit init callback. -+ * This function is called in the context of HTCStart() to setup initial (application-specific) -+ * credit distributions */ -+static void ar6000_credit_init(void *Context, -+ HTC_ENDPOINT_CREDIT_DIST *pEPList, -+ int TotalCredits) -+{ -+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; -+ int count; -+ COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context; -+ -+ pCredInfo->CurrentFreeCredits = TotalCredits; -+ pCredInfo->TotalAvailableCredits = TotalCredits; -+ -+ pCurEpDist = pEPList; -+ -+ /* run through the list and initialize */ -+ while (pCurEpDist != NULL) { -+ -+ /* set minimums for each endpoint */ -+ pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg; -+ -+ if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) { -+ /* give control service some credits */ -+ GiveCredits(pCredInfo,pCurEpDist,pCurEpDist->TxCreditsMin); -+ /* control service is always marked active, it never goes inactive EVER */ -+ SET_EP_ACTIVE(pCurEpDist); -+ } else if (pCurEpDist->ServiceID == WMI_DATA_BK_SVC) { -+ /* this is the lowest priority data endpoint, save this off for easy access */ -+ pCredInfo->pLowestPriEpDist = pCurEpDist; -+ } -+ -+ /* Streams have to be created (explicit | implicit)for all kinds -+ * of traffic. BE endpoints are also inactive in the beginning. -+ * When BE traffic starts it creates implicit streams that -+ * redistributes credits. -+ */ -+ -+ /* note, all other endpoints have minimums set but are initially given NO credits. -+ * Credits will be distributed as traffic activity demands */ -+ pCurEpDist = pCurEpDist->pNext; -+ } -+ -+ if (pCredInfo->CurrentFreeCredits <= 0) { -+ AR_DEBUG_PRINTF(ATH_LOG_INF, ("Not enough credits (%d) to do credit distributions \n", TotalCredits)); -+ A_ASSERT(FALSE); -+ return; -+ } -+ -+ /* reset list */ -+ pCurEpDist = pEPList; -+ /* now run through the list and set max operating credit limits for everyone */ -+ while (pCurEpDist != NULL) { -+ if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) { -+ /* control service max is just 1 max message */ -+ pCurEpDist->TxCreditsNorm = pCurEpDist->TxCreditsPerMaxMsg; -+ } else { -+ /* for the remaining data endpoints, we assume that each TxCreditsPerMaxMsg are -+ * the same. -+ * We use a simple calculation here, we take the remaining credits and -+ * determine how many max messages this can cover and then set each endpoint's -+ * normal value equal to half this amount. -+ * */ -+ count = (pCredInfo->CurrentFreeCredits/pCurEpDist->TxCreditsPerMaxMsg) * pCurEpDist->TxCreditsPerMaxMsg; -+ count = count >> 1; -+ count = max(count,pCurEpDist->TxCreditsPerMaxMsg); -+ /* set normal */ -+ pCurEpDist->TxCreditsNorm = count; -+ -+ } -+ pCurEpDist = pCurEpDist->pNext; -+ } -+ -+} -+ -+ -+/* default credit distribution callback -+ * This callback is invoked whenever endpoints require credit distributions. -+ * A lock is held while this function is invoked, this function shall NOT block. -+ * The pEPDistList is a list of distribution structures in prioritized order as -+ * defined by the call to the HTCSetCreditDistribution() api. -+ * -+ */ -+static void ar6000_credit_distribute(void *Context, -+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList, -+ HTC_CREDIT_DIST_REASON Reason) -+{ -+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; -+ COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context; -+ -+ switch (Reason) { -+ case HTC_CREDIT_DIST_SEND_COMPLETE : -+ pCurEpDist = pEPDistList; -+ /* we are given the start of the endpoint distribution list. -+ * There may be one or more endpoints to service. -+ * Run through the list and distribute credits */ -+ while (pCurEpDist != NULL) { -+ -+ if (pCurEpDist->TxCreditsToDist > 0) { -+ /* return the credits back to the endpoint */ -+ pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist; -+ /* always zero out when we are done */ -+ pCurEpDist->TxCreditsToDist = 0; -+ -+ if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsAssigned) { -+ /* reduce to the assigned limit, previous credit reductions -+ * could have caused the limit to change */ -+ ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsAssigned); -+ } -+ -+ if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsNorm) { -+ /* oversubscribed endpoints need to reduce back to normal */ -+ ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsNorm); -+ } -+ } -+ -+ pCurEpDist = pCurEpDist->pNext; -+ } -+ -+ A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits); -+ -+ break; -+ -+ case HTC_CREDIT_DIST_ACTIVITY_CHANGE : -+ RedistributeCredits(pCredInfo,pEPDistList); -+ break; -+ case HTC_CREDIT_DIST_SEEK_CREDITS : -+ SeekCredits(pCredInfo,pEPDistList); -+ break; -+ case HTC_DUMP_CREDIT_STATE : -+ AR_DEBUG_PRINTF(ATH_LOG_INF, ("Credit Distribution, total : %d, free : %d\n", -+ pCredInfo->TotalAvailableCredits, pCredInfo->CurrentFreeCredits)); -+ break; -+ default: -+ break; -+ -+ } -+ -+} -+ -+/* redistribute credits based on activity change */ -+static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, -+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList) -+{ -+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist = pEPDistList; -+ -+ /* walk through the list and remove credits from inactive endpoints */ -+ while (pCurEpDist != NULL) { -+ -+ if (pCurEpDist->ServiceID != WMI_CONTROL_SVC) { -+ if (!IS_EP_ACTIVE(pCurEpDist)) { -+ /* EP is inactive, reduce credits back to zero */ -+ ReduceCredits(pCredInfo, pCurEpDist, 0); -+ } -+ } -+ -+ /* NOTE in the active case, we do not need to do anything further, -+ * when an EP goes active and needs credits, HTC will call into -+ * our distribution function using a reason code of HTC_CREDIT_DIST_SEEK_CREDITS */ -+ -+ pCurEpDist = pCurEpDist->pNext; -+ } -+ -+ A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits); -+ -+} -+ -+/* HTC has an endpoint that needs credits, pEPDist is the endpoint in question */ -+static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, -+ HTC_ENDPOINT_CREDIT_DIST *pEPDist) -+{ -+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; -+ int credits = 0; -+ int need; -+ -+ do { -+ -+ if (pEPDist->ServiceID == WMI_CONTROL_SVC) { -+ /* we never oversubscribe on the control service, this is not -+ * a high performance path and the target never holds onto control -+ * credits for too long */ -+ break; -+ } -+ -+ /* for all other services, we follow a simple algorithm of -+ * 1. checking the free pool for credits -+ * 2. checking lower priority endpoints for credits to take */ -+ -+ if (pCredInfo->CurrentFreeCredits >= 2 * pEPDist->TxCreditsSeek) { -+ /* try to give more credits than it needs */ -+ credits = 2 * pEPDist->TxCreditsSeek; -+ } else { -+ /* give what we can */ -+ credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek); -+ } -+ -+ if (credits >= pEPDist->TxCreditsSeek) { -+ /* we found some to fullfill the seek request */ -+ break; -+ } -+ -+ /* we don't have enough in the free pool, try taking away from lower priority services -+ * -+ * The rule for taking away credits: -+ * 1. Only take from lower priority endpoints -+ * 2. Only take what is allocated above the minimum (never starve an endpoint completely) -+ * 3. Only take what you need. -+ * -+ * */ -+ -+ /* starting at the lowest priority */ -+ pCurEpDist = pCredInfo->pLowestPriEpDist; -+ -+ /* work backwards until we hit the endpoint again */ -+ while (pCurEpDist != pEPDist) { -+ /* calculate how many we need so far */ -+ need = pEPDist->TxCreditsSeek - pCredInfo->CurrentFreeCredits; -+ -+ if ((pCurEpDist->TxCreditsAssigned - need) > pCurEpDist->TxCreditsMin) { -+ /* the current one has been allocated more than it's minimum and it -+ * has enough credits assigned above it's minimum to fullfill our need -+ * try to take away just enough to fullfill our need */ -+ ReduceCredits(pCredInfo, -+ pCurEpDist, -+ pCurEpDist->TxCreditsAssigned - need); -+ -+ if (pCredInfo->CurrentFreeCredits >= pEPDist->TxCreditsSeek) { -+ /* we have enough */ -+ break; -+ } -+ } -+ -+ pCurEpDist = pCurEpDist->pPrev; -+ } -+ -+ /* return what we can get */ -+ credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek); -+ -+ } while (FALSE); -+ -+ /* did we find some credits? */ -+ if (credits) { -+ /* give what we can */ -+ GiveCredits(pCredInfo, pEPDist, credits); -+ } -+ -+} -+ -+/* initialize and setup credit distribution */ -+A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo) -+{ -+ HTC_SERVICE_ID servicepriority[5]; -+ -+ A_MEMZERO(pCredInfo,sizeof(COMMON_CREDIT_STATE_INFO)); -+ -+ servicepriority[0] = WMI_CONTROL_SVC; /* highest */ -+ servicepriority[1] = WMI_DATA_VO_SVC; -+ servicepriority[2] = WMI_DATA_VI_SVC; -+ servicepriority[3] = WMI_DATA_BE_SVC; -+ servicepriority[4] = WMI_DATA_BK_SVC; /* lowest */ -+ -+ /* set callbacks and priority list */ -+ HTCSetCreditDistribution(HTCHandle, -+ pCredInfo, -+ ar6000_credit_distribute, -+ ar6000_credit_init, -+ servicepriority, -+ 5); -+ -+ return A_OK; -+} -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wlan/wlan_node.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wlan/wlan_node.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,371 @@ -+/*- -+ * Copyright (c) 2001 Atsushi Onoe -+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting -+ * Copyright (c) 2004-2005 Atheros Communications -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * Alternatively, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2 as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_node.c#1 $ -+ */ -+/* -+ * IEEE 802.11 node handling support. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static void wlan_node_timeout(A_ATH_TIMER arg); -+static bss_t * _ieee80211_find_node(struct ieee80211_node_table *nt, -+ const A_UINT8 *macaddr); -+ -+bss_t * -+wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size) -+{ -+ bss_t *ni; -+ -+ ni = A_MALLOC_NOWAIT(sizeof(bss_t)); -+ -+ if (ni != NULL) { -+ ni->ni_buf = A_MALLOC_NOWAIT(wh_size); -+ if (ni->ni_buf == NULL) { -+ A_FREE(ni); -+ ni = NULL; -+ return ni; -+ } -+ } else { -+ return ni; -+ } -+ -+ /* Make sure our lists are clean */ -+ ni->ni_list_next = NULL; -+ ni->ni_list_prev = NULL; -+ ni->ni_hash_next = NULL; -+ ni->ni_hash_prev = NULL; -+ -+ // -+ // ni_scangen never initialized before and during suspend/resume of winmobile, customer (LG/SEMCO) identified -+ // that some junk has been stored in this, due to this scan list didn't properly updated -+ // -+ ni->ni_scangen = 0; -+ -+ return ni; -+} -+ -+void -+wlan_node_free(bss_t *ni) -+{ -+ if (ni->ni_buf != NULL) { -+ A_FREE(ni->ni_buf); -+ } -+ A_FREE(ni); -+} -+ -+void -+wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni, -+ const A_UINT8 *macaddr) -+{ -+ int hash; -+ -+ A_MEMCPY(ni->ni_macaddr, macaddr, IEEE80211_ADDR_LEN); -+ hash = IEEE80211_NODE_HASH(macaddr); -+ ieee80211_node_initref(ni); /* mark referenced */ -+ -+ ni->ni_tstamp = A_GET_MS(WLAN_NODE_INACT_TIMEOUT_MSEC); -+ IEEE80211_NODE_LOCK_BH(nt); -+ -+ /* Insert at the end of the node list */ -+ ni->ni_list_next = NULL; -+ ni->ni_list_prev = nt->nt_node_last; -+ if(nt->nt_node_last != NULL) -+ { -+ nt->nt_node_last->ni_list_next = ni; -+ } -+ nt->nt_node_last = ni; -+ if(nt->nt_node_first == NULL) -+ { -+ nt->nt_node_first = ni; -+ } -+ -+ /* Insert into the hash list i.e. the bucket */ -+ if((ni->ni_hash_next = nt->nt_hash[hash]) != NULL) -+ { -+ nt->nt_hash[hash]->ni_hash_prev = ni; -+ } -+ ni->ni_hash_prev = NULL; -+ nt->nt_hash[hash] = ni; -+ -+ if (!nt->isTimerArmed) { -+ A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0); -+ nt->isTimerArmed = TRUE; -+ } -+ -+ IEEE80211_NODE_UNLOCK_BH(nt); -+} -+ -+static bss_t * -+_ieee80211_find_node(struct ieee80211_node_table *nt, -+ const A_UINT8 *macaddr) -+{ -+ bss_t *ni; -+ int hash; -+ -+ IEEE80211_NODE_LOCK_ASSERT(nt); -+ -+ hash = IEEE80211_NODE_HASH(macaddr); -+ for(ni = nt->nt_hash[hash]; ni; ni = ni->ni_hash_next) { -+ if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { -+ ieee80211_node_incref(ni); /* mark referenced */ -+ return ni; -+ } -+ } -+ return NULL; -+} -+ -+bss_t * -+wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr) -+{ -+ bss_t *ni; -+ -+ IEEE80211_NODE_LOCK(nt); -+ ni = _ieee80211_find_node(nt, macaddr); -+ IEEE80211_NODE_UNLOCK(nt); -+ return ni; -+} -+ -+/* -+ * Reclaim a node. If this is the last reference count then -+ * do the normal free work. Otherwise remove it from the node -+ * table and mark it gone by clearing the back-reference. -+ */ -+void -+wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni) -+{ -+ IEEE80211_NODE_LOCK(nt); -+ -+ if(ni->ni_list_prev == NULL) -+ { -+ /* First in list so fix the list head */ -+ nt->nt_node_first = ni->ni_list_next; -+ } -+ else -+ { -+ ni->ni_list_prev->ni_list_next = ni->ni_list_next; -+ } -+ -+ if(ni->ni_list_next == NULL) -+ { -+ /* Last in list so fix list tail */ -+ nt->nt_node_last = ni->ni_list_prev; -+ } -+ else -+ { -+ ni->ni_list_next->ni_list_prev = ni->ni_list_prev; -+ } -+ -+ if(ni->ni_hash_prev == NULL) -+ { -+ /* First in list so fix the list head */ -+ int hash; -+ hash = IEEE80211_NODE_HASH(ni->ni_macaddr); -+ nt->nt_hash[hash] = ni->ni_hash_next; -+ } -+ else -+ { -+ ni->ni_hash_prev->ni_hash_next = ni->ni_hash_next; -+ } -+ -+ if(ni->ni_hash_next != NULL) -+ { -+ ni->ni_hash_next->ni_hash_prev = ni->ni_hash_prev; -+ } -+ wlan_node_free(ni); -+ -+ IEEE80211_NODE_UNLOCK(nt); -+} -+ -+static void -+wlan_node_dec_free(bss_t *ni) -+{ -+ if (ieee80211_node_dectestref(ni)) { -+ wlan_node_free(ni); -+ } -+} -+ -+void -+wlan_free_allnodes(struct ieee80211_node_table *nt) -+{ -+ bss_t *ni; -+ -+ while ((ni = nt->nt_node_first) != NULL) { -+ wlan_node_reclaim(nt, ni); -+ } -+} -+ -+void -+wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f, -+ void *arg) -+{ -+ bss_t *ni; -+ A_UINT32 gen; -+ -+ gen = ++nt->nt_scangen; -+ -+ IEEE80211_NODE_LOCK(nt); -+ for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) { -+ if (ni->ni_scangen != gen) { -+ ni->ni_scangen = gen; -+ (void) ieee80211_node_incref(ni); -+ (*f)(arg, ni); -+ wlan_node_dec_free(ni); -+ } -+ } -+ IEEE80211_NODE_UNLOCK(nt); -+} -+ -+/* -+ * Node table support. -+ */ -+void -+wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt) -+{ -+ int i; -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_WLAN, ("node table = 0x%x\n", (A_UINT32)nt)); -+ IEEE80211_NODE_LOCK_INIT(nt); -+ -+ nt->nt_node_first = nt->nt_node_last = NULL; -+ for(i = 0; i < IEEE80211_NODE_HASHSIZE; i++) -+ { -+ nt->nt_hash[i] = NULL; -+ } -+ A_INIT_TIMER(&nt->nt_inact_timer, wlan_node_timeout, nt); -+ nt->isTimerArmed = FALSE; -+ nt->nt_wmip = wmip; -+} -+ -+static void -+wlan_node_timeout(A_ATH_TIMER arg) -+{ -+ struct ieee80211_node_table *nt = (struct ieee80211_node_table *)arg; -+ bss_t *bss, *nextBss; -+ A_UINT8 myBssid[IEEE80211_ADDR_LEN], reArmTimer = FALSE; -+ -+ wmi_get_current_bssid(nt->nt_wmip, myBssid); -+ -+ bss = nt->nt_node_first; -+ while (bss != NULL) -+ { -+ nextBss = bss->ni_list_next; -+ if (A_MEMCMP(myBssid, bss->ni_macaddr, sizeof(myBssid)) != 0) -+ { -+ -+ if (bss->ni_tstamp <= A_GET_MS(0)) -+ { -+ /* -+ * free up all but the current bss - if set -+ */ -+ wlan_node_reclaim(nt, bss); -+ } -+ else -+ { -+ /* -+ * Re-arm timer, only when we have a bss other than -+ * current bss AND it is not aged-out. -+ */ -+ reArmTimer = TRUE; -+ } -+ } -+ bss = nextBss; -+ } -+ -+ if(reArmTimer) -+ A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0); -+ -+ nt->isTimerArmed = reArmTimer; -+} -+ -+void -+wlan_node_table_cleanup(struct ieee80211_node_table *nt) -+{ -+ A_UNTIMEOUT(&nt->nt_inact_timer); -+ A_DELETE_TIMER(&nt->nt_inact_timer); -+ wlan_free_allnodes(nt); -+ IEEE80211_NODE_LOCK_DESTROY(nt); -+} -+ -+bss_t * -+wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid, -+ A_UINT32 ssidLength, A_BOOL bIsWPA2) -+{ -+ bss_t *ni = NULL; -+ A_UCHAR *pIESsid = NULL; -+ -+ IEEE80211_NODE_LOCK (nt); -+ -+ for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) { -+ pIESsid = ni->ni_cie.ie_ssid; -+ if (pIESsid[1] <= 32) { -+ -+ // Step 1 : Check SSID -+ if (0x00 == memcmp (pSsid, &pIESsid[2], ssidLength)) { -+ -+ // Step 2 : if SSID matches, check WPA or WPA2 -+ if (TRUE == bIsWPA2 && NULL != ni->ni_cie.ie_rsn) { -+ ieee80211_node_incref (ni); /* mark referenced */ -+ IEEE80211_NODE_UNLOCK (nt); -+ return ni; -+ } -+ if (FALSE == bIsWPA2 && NULL != ni->ni_cie.ie_wpa) { -+ ieee80211_node_incref(ni); /* mark referenced */ -+ IEEE80211_NODE_UNLOCK (nt); -+ return ni; -+ } -+ } -+ } -+ } -+ -+ IEEE80211_NODE_UNLOCK (nt); -+ -+ return NULL; -+} -+ -+void -+wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni) -+{ -+ IEEE80211_NODE_LOCK (nt); -+ wlan_node_dec_free (ni); -+ IEEE80211_NODE_UNLOCK (nt); -+} -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wlan/wlan_recv_beacon.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wlan/wlan_recv_beacon.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,192 @@ -+/*- -+ * Copyright (c) 2001 Atsushi Onoe -+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The name of the author may not be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * Alternatively, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2 as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+/* -+ * IEEE 802.11 input handling. -+ */ -+ -+#include "a_config.h" -+#include "athdefs.h" -+#include "a_types.h" -+#include "a_osapi.h" -+#include -+#include -+#include -+ -+#define IEEE80211_VERIFY_LENGTH(_len, _minlen) do { \ -+ if ((_len) < (_minlen)) { \ -+ return A_EINVAL; \ -+ } \ -+} while (0) -+ -+#define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen) do { \ -+ if ((__elem) == NULL) { \ -+ return A_EINVAL; \ -+ } \ -+ if ((__elem)[1] > (__maxlen)) { \ -+ return A_EINVAL; \ -+ } \ -+} while (0) -+ -+ -+/* unaligned little endian access */ -+#define LE_READ_2(p) \ -+ ((A_UINT16) \ -+ ((((A_UINT8 *)(p))[0] ) | (((A_UINT8 *)(p))[1] << 8))) -+ -+#define LE_READ_4(p) \ -+ ((A_UINT32) \ -+ ((((A_UINT8 *)(p))[0] ) | (((A_UINT8 *)(p))[1] << 8) | \ -+ (((A_UINT8 *)(p))[2] << 16) | (((A_UINT8 *)(p))[3] << 24))) -+ -+ -+static int __inline -+iswpaoui(const A_UINT8 *frm) -+{ -+ return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI); -+} -+ -+static int __inline -+iswmmoui(const A_UINT8 *frm) -+{ -+ return frm[1] > 3 && LE_READ_4(frm+2) == ((WMM_OUI_TYPE<<24)|WMM_OUI); -+} -+ -+static int __inline -+iswmmparam(const A_UINT8 *frm) -+{ -+ return frm[1] > 5 && frm[6] == WMM_PARAM_OUI_SUBTYPE; -+} -+ -+static int __inline -+iswmminfo(const A_UINT8 *frm) -+{ -+ return frm[1] > 5 && frm[6] == WMM_INFO_OUI_SUBTYPE; -+} -+ -+static int __inline -+isatherosoui(const A_UINT8 *frm) -+{ -+ return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI); -+} -+ -+static int __inline -+iswscoui(const A_UINT8 *frm) -+{ -+ return frm[1] > 3 && LE_READ_4(frm+2) == ((0x04<<24)|WPA_OUI); -+} -+ -+A_STATUS -+wlan_parse_beacon(A_UINT8 *buf, int framelen, struct ieee80211_common_ie *cie) -+{ -+ A_UINT8 *frm, *efrm; -+ -+ frm = buf; -+ efrm = (A_UINT8 *) (frm + framelen); -+ -+ /* -+ * beacon/probe response frame format -+ * [8] time stamp -+ * [2] beacon interval -+ * [2] capability information -+ * [tlv] ssid -+ * [tlv] supported rates -+ * [tlv] country information -+ * [tlv] parameter set (FH/DS) -+ * [tlv] erp information -+ * [tlv] extended supported rates -+ * [tlv] WMM -+ * [tlv] WPA or RSN -+ * [tlv] Atheros Advanced Capabilities -+ */ -+ IEEE80211_VERIFY_LENGTH(efrm - frm, 12); -+ A_MEMZERO(cie, sizeof(*cie)); -+ -+ cie->ie_tstamp = frm; frm += 8; -+ cie->ie_beaconInt = A_LE2CPU16(*(A_UINT16 *)frm); frm += 2; -+ cie->ie_capInfo = A_LE2CPU16(*(A_UINT16 *)frm); frm += 2; -+ cie->ie_chan = 0; -+ -+ while (frm < efrm) { -+ switch (*frm) { -+ case IEEE80211_ELEMID_SSID: -+ cie->ie_ssid = frm; -+ break; -+ case IEEE80211_ELEMID_RATES: -+ cie->ie_rates = frm; -+ break; -+ case IEEE80211_ELEMID_COUNTRY: -+ cie->ie_country = frm; -+ break; -+ case IEEE80211_ELEMID_FHPARMS: -+ break; -+ case IEEE80211_ELEMID_DSPARMS: -+ cie->ie_chan = frm[2]; -+ break; -+ case IEEE80211_ELEMID_TIM: -+ cie->ie_tim = frm; -+ break; -+ case IEEE80211_ELEMID_IBSSPARMS: -+ break; -+ case IEEE80211_ELEMID_XRATES: -+ cie->ie_xrates = frm; -+ break; -+ case IEEE80211_ELEMID_ERP: -+ if (frm[1] != 1) { -+ //A_PRINTF("Discarding ERP Element - Bad Len\n"); -+ return A_EINVAL; -+ } -+ cie->ie_erp = frm[2]; -+ break; -+ case IEEE80211_ELEMID_RSN: -+ cie->ie_rsn = frm; -+ break; -+ case IEEE80211_ELEMID_VENDOR: -+ if (iswpaoui(frm)) { -+ cie->ie_wpa = frm; -+ } else if (iswmmoui(frm)) { -+ cie->ie_wmm = frm; -+ } else if (isatherosoui(frm)) { -+ cie->ie_ath = frm; -+ } else if(iswscoui(frm)) { -+ cie->ie_wsc = frm; -+ } -+ break; -+ default: -+ break; -+ } -+ frm += frm[1] + 2; -+ } -+ IEEE80211_VERIFY_ELEMENT(cie->ie_rates, IEEE80211_RATE_MAXSIZE); -+ IEEE80211_VERIFY_ELEMENT(cie->ie_ssid, IEEE80211_NWID_LEN); -+ -+ return A_OK; -+} -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wlan/wlan_utils.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wlan/wlan_utils.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,59 @@ -+/* -+ * Copyright (c) 2004-2005 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * This module implements frequently used wlan utilies -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_utils.c#1 $ -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+/* -+ * converts ieee channel number to frequency -+ */ -+A_UINT16 -+wlan_ieee2freq(int chan) -+{ -+ if (chan == 14) { -+ return 2484; -+ } -+ if (chan < 14) { /* 0-13 */ -+ return (2407 + (chan*5)); -+ } -+ if (chan < 27) { /* 15-26 */ -+ return (2512 + ((chan-15)*20)); -+ } -+ return (5000 + (chan*5)); -+} -+ -+/* -+ * Converts MHz frequency to IEEE channel number. -+ */ -+A_UINT32 -+wlan_freq2ieee(A_UINT16 freq) -+{ -+ if (freq == 2484) -+ return 14; -+ if (freq < 2484) -+ return (freq - 2407) / 5; -+ if (freq < 5000) -+ return 15 + ((freq - 2512) / 20); -+ return (freq - 5000) / 5; -+} -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wmi/wmi.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wmi/wmi.c 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,3954 @@ -+/* -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * This module implements the hardware independent layer of the -+ * Wireless Module Interface (WMI) protocol. -+ * -+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi.c#3 $ -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include "htc.h" -+#include "htc_api.h" -+#include "wmi.h" -+#include -+#include -+#include -+#include -+#include "dset_api.h" -+#include "gpio_api.h" -+#include "wmi_host.h" -+#include "a_drv.h" -+#include "a_drv_api.h" -+#include "a_debug.h" -+#include "dbglog_api.h" -+ -+static A_STATUS wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+ -+static A_STATUS wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_sync_point(struct wmi_t *wmip); -+ -+static A_STATUS wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+ -+static A_STATUS wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+#ifdef CONFIG_HOST_DSET_SUPPORT -+static A_STATUS wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+#endif /* CONFIG_HOST_DSET_SUPPORT */ -+ -+ -+static A_STATUS wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, -+ int len); -+static A_STATUS -+wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len); -+ -+#ifdef CONFIG_HOST_GPIO_SUPPORT -+static A_STATUS wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+static A_STATUS wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+#endif /* CONFIG_HOST_GPIO_SUPPORT */ -+ -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+static A_STATUS -+wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+#endif -+ -+static A_STATUS -+wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+ -+static A_STATUS -+wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+ -+static A_STATUS -+wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+ -+static A_BOOL -+wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex); -+ -+static A_STATUS -+wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+ -+static A_STATUS -+wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+ -+static A_STATUS wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); -+ -+int wps_enable; -+static const A_INT32 wmi_rateTable[] = { -+ 1000, -+ 2000, -+ 5500, -+ 11000, -+ 6000, -+ 9000, -+ 12000, -+ 18000, -+ 24000, -+ 36000, -+ 48000, -+ 54000, -+ 0}; -+ -+#define MODE_A_SUPPORT_RATE_START 4 -+#define MODE_A_SUPPORT_RATE_STOP 11 -+ -+#define MODE_GONLY_SUPPORT_RATE_START MODE_A_SUPPORT_RATE_START -+#define MODE_GONLY_SUPPORT_RATE_STOP MODE_A_SUPPORT_RATE_STOP -+ -+#define MODE_B_SUPPORT_RATE_START 0 -+#define MODE_B_SUPPORT_RATE_STOP 3 -+ -+#define MODE_G_SUPPORT_RATE_START 0 -+#define MODE_G_SUPPORT_RATE_STOP 11 -+ -+#define MAX_NUMBER_OF_SUPPORT_RATES (MODE_G_SUPPORT_RATE_STOP + 1) -+ -+/* 802.1d to AC mapping. Refer pg 57 of WMM-test-plan-v1.2 */ -+const A_UINT8 up_to_ac[]= { -+ WMM_AC_BE, -+ WMM_AC_BK, -+ WMM_AC_BK, -+ WMM_AC_BE, -+ WMM_AC_VI, -+ WMM_AC_VI, -+ WMM_AC_VO, -+ WMM_AC_VO, -+ }; -+ -+void * -+wmi_init(void *devt) -+{ -+ struct wmi_t *wmip; -+ -+ wmip = A_MALLOC(sizeof(struct wmi_t)); -+ if (wmip == NULL) { -+ return (NULL); -+ } -+ A_MEMZERO(wmip, sizeof(*wmip)); -+ A_MUTEX_INIT(&wmip->wmi_lock); -+ wmip->wmi_devt = devt; -+ wlan_node_table_init(wmip, &wmip->wmi_scan_table); -+ wmi_qos_state_init(wmip); -+ wmip->wmi_powerMode = REC_POWER; -+ wmip->wmi_phyMode = WMI_11G_MODE; -+ -+ return (wmip); -+} -+ -+void -+wmi_qos_state_init(struct wmi_t *wmip) -+{ -+ A_UINT8 i; -+ -+ if (wmip == NULL) { -+ return; -+ } -+ LOCK_WMI(wmip); -+ -+ /* Initialize QoS States */ -+ wmip->wmi_numQoSStream = 0; -+ -+ wmip->wmi_fatPipeExists = 0; -+ -+ for (i=0; i < WMM_NUM_AC; i++) { -+ wmip->wmi_streamExistsForAC[i]=0; -+ } -+ -+ /* Initialize the static Wmi stream Pri to WMM AC mappings Arrays */ -+ WMI_INIT_WMISTREAM_AC_MAP(wmip); -+ -+ UNLOCK_WMI(wmip); -+ -+ A_WMI_SET_NUMDATAENDPTS(wmip->wmi_devt, 1); -+} -+ -+void -+wmi_shutdown(struct wmi_t *wmip) -+{ -+ if (wmip != NULL) { -+ wlan_node_table_cleanup(&wmip->wmi_scan_table); -+ if (A_IS_MUTEX_VALID(&wmip->wmi_lock)) { -+ A_MUTEX_DELETE(&wmip->wmi_lock); -+ } -+ A_FREE(wmip); -+ } -+} -+ -+/* -+ * performs DIX to 802.3 encapsulation for transmit packets. -+ * uses passed in buffer. Returns buffer or NULL if failed. -+ * Assumes the entire DIX header is contigous and that there is -+ * enough room in the buffer for a 802.3 mac header and LLC+SNAP headers. -+ */ -+A_STATUS -+wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf) -+{ -+ A_UINT8 *datap; -+ A_UINT16 typeorlen; -+ ATH_MAC_HDR macHdr; -+ ATH_LLC_SNAP_HDR *llcHdr; -+ -+ A_ASSERT(osbuf != NULL); -+ -+ if (A_NETBUF_HEADROOM(osbuf) < -+ (sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR))) -+ { -+ return A_NO_MEMORY; -+ } -+ -+ datap = A_NETBUF_DATA(osbuf); -+ -+ typeorlen = *(A_UINT16 *)(datap + ATH_MAC_LEN + ATH_MAC_LEN); -+ -+ if (!IS_ETHERTYPE(A_BE2CPU16(typeorlen))) { -+ /* -+ * packet is already in 802.3 format - return success -+ */ -+ A_DPRINTF(DBG_WMI, (DBGFMT "packet already 802.3\n", DBGARG)); -+ return (A_OK); -+ } -+ -+ /* -+ * Save mac fields and length to be inserted later -+ */ -+ A_MEMCPY(macHdr.dstMac, datap, ATH_MAC_LEN); -+ A_MEMCPY(macHdr.srcMac, datap + ATH_MAC_LEN, ATH_MAC_LEN); -+ macHdr.typeOrLen = A_CPU2BE16(A_NETBUF_LEN(osbuf) - sizeof(ATH_MAC_HDR) + -+ sizeof(ATH_LLC_SNAP_HDR)); -+ -+ /* -+ * Make room for LLC+SNAP headers -+ */ -+ if (A_NETBUF_PUSH(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) { -+ return A_NO_MEMORY; -+ } -+ -+ datap = A_NETBUF_DATA(osbuf); -+ -+ A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR)); -+ -+ llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR)); -+ llcHdr->dsap = 0xAA; -+ llcHdr->ssap = 0xAA; -+ llcHdr->cntl = 0x03; -+ llcHdr->orgCode[0] = 0x0; -+ llcHdr->orgCode[1] = 0x0; -+ llcHdr->orgCode[2] = 0x0; -+ llcHdr->etherType = typeorlen; -+ -+ return (A_OK); -+} -+ -+/* -+ * Adds a WMI data header -+ * Assumes there is enough room in the buffer to add header. -+ */ -+A_STATUS -+wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType) -+{ -+ WMI_DATA_HDR *dtHdr; -+ -+ A_ASSERT(osbuf != NULL); -+ -+ if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) { -+ return A_NO_MEMORY; -+ } -+ -+ dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf); -+ dtHdr->info = msgType; -+ dtHdr->rssi = 0; -+ -+ return (A_OK); -+} -+ -+A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up) -+{ -+ A_UINT8 *datap; -+ A_UINT8 trafficClass = WMM_AC_BE, userPriority = up; -+ ATH_LLC_SNAP_HDR *llcHdr; -+ A_UINT16 ipType = IP_ETHERTYPE; -+ WMI_DATA_HDR *dtHdr; -+ WMI_CREATE_PSTREAM_CMD cmd; -+ A_BOOL streamExists = FALSE; -+ -+ A_ASSERT(osbuf != NULL); -+ -+ datap = A_NETBUF_DATA(osbuf); -+ -+ if (up == UNDEFINED_PRI) { -+ llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(WMI_DATA_HDR) + -+ sizeof(ATH_MAC_HDR)); -+ -+ if (llcHdr->etherType == A_CPU2BE16(ipType)) { -+ /* Extract the endpoint info from the TOS field in the IP header */ -+ userPriority = A_WMI_IPTOS_TO_USERPRIORITY(((A_UINT8 *)llcHdr) + sizeof(ATH_LLC_SNAP_HDR)); -+ } -+ } -+ -+ if (userPriority < MAX_NUM_PRI) { -+ trafficClass = convert_userPriority_to_trafficClass(userPriority); -+ } -+ -+ dtHdr = (WMI_DATA_HDR *)datap; -+ if(dir==UPLINK_TRAFFIC) -+ dtHdr->info |= (userPriority & WMI_DATA_HDR_UP_MASK) << WMI_DATA_HDR_UP_SHIFT; /* lower 3-bits are 802.1d priority */ -+ -+ LOCK_WMI(wmip); -+ streamExists = wmip->wmi_fatPipeExists; -+ UNLOCK_WMI(wmip); -+ -+ if (!(streamExists & (1 << trafficClass))) { -+ -+ A_MEMZERO(&cmd, sizeof(cmd)); -+ cmd.trafficClass = trafficClass; -+ cmd.userPriority = userPriority; -+ cmd.inactivityInt = WMI_IMPLICIT_PSTREAM_INACTIVITY_INT; -+ /* Implicit streams are created with TSID 0xFF */ -+ cmd.tsid = WMI_IMPLICIT_PSTREAM; -+ wmi_create_pstream_cmd(wmip, &cmd); -+ } -+ -+ return trafficClass; -+} -+ -+WMI_PRI_STREAM_ID -+wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass) -+{ -+ return WMI_ACCESSCATEGORY_WMISTREAM(wmip, trafficClass); -+} -+ -+/* -+ * performs 802.3 to DIX encapsulation for received packets. -+ * Assumes the entire 802.3 header is contigous. -+ */ -+A_STATUS -+wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf) -+{ -+ A_UINT8 *datap; -+ ATH_MAC_HDR macHdr; -+ ATH_LLC_SNAP_HDR *llcHdr; -+ -+ A_ASSERT(osbuf != NULL); -+ datap = A_NETBUF_DATA(osbuf); -+ -+ A_MEMCPY(&macHdr, datap, sizeof(ATH_MAC_HDR)); -+ llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR)); -+ macHdr.typeOrLen = llcHdr->etherType; -+ -+ if (A_NETBUF_PULL(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) { -+ return A_NO_MEMORY; -+ } -+ -+ datap = A_NETBUF_DATA(osbuf); -+ -+ A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR)); -+ -+ return (A_OK); -+} -+ -+/* -+ * Removes a WMI data header -+ */ -+A_STATUS -+wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf) -+{ -+ A_ASSERT(osbuf != NULL); -+ -+ return (A_NETBUF_PULL(osbuf, sizeof(WMI_DATA_HDR))); -+} -+ -+void -+wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg) -+{ -+ wlan_iterate_nodes(&wmip->wmi_scan_table, f, arg); -+} -+ -+/* -+ * WMI Extended Event received from Target. -+ */ -+A_STATUS -+wmi_control_rx_xtnd(struct wmi_t *wmip, void *osbuf) -+{ -+ WMIX_CMD_HDR *cmd; -+ A_UINT16 id; -+ A_UINT8 *datap; -+ A_UINT32 len; -+ A_STATUS status = A_OK; -+ -+ if (A_NETBUF_LEN(osbuf) < sizeof(WMIX_CMD_HDR)) { -+ A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG)); -+ wmip->wmi_stats.cmd_len_err++; -+ A_NETBUF_FREE(osbuf); -+ return A_ERROR; -+ } -+ -+ cmd = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf); -+ id = cmd->commandId; -+ -+ if (A_NETBUF_PULL(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) { -+ A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG)); -+ wmip->wmi_stats.cmd_len_err++; -+ A_NETBUF_FREE(osbuf); -+ return A_ERROR; -+ } -+ -+ datap = A_NETBUF_DATA(osbuf); -+ len = A_NETBUF_LEN(osbuf); -+ -+ switch (id) { -+ case (WMIX_DSETOPENREQ_EVENTID): -+ status = wmi_dset_open_req_rx(wmip, datap, len); -+ break; -+#ifdef CONFIG_HOST_DSET_SUPPORT -+ case (WMIX_DSETCLOSE_EVENTID): -+ status = wmi_dset_close_rx(wmip, datap, len); -+ break; -+ case (WMIX_DSETDATAREQ_EVENTID): -+ status = wmi_dset_data_req_rx(wmip, datap, len); -+ break; -+#endif /* CONFIG_HOST_DSET_SUPPORT */ -+#ifdef CONFIG_HOST_GPIO_SUPPORT -+ case (WMIX_GPIO_INTR_EVENTID): -+ wmi_gpio_intr_rx(wmip, datap, len); -+ break; -+ case (WMIX_GPIO_DATA_EVENTID): -+ wmi_gpio_data_rx(wmip, datap, len); -+ break; -+ case (WMIX_GPIO_ACK_EVENTID): -+ wmi_gpio_ack_rx(wmip, datap, len); -+ break; -+#endif /* CONFIG_HOST_GPIO_SUPPORT */ -+ case (WMIX_HB_CHALLENGE_RESP_EVENTID): -+ wmi_hbChallengeResp_rx(wmip, datap, len); -+ break; -+ case (WMIX_DBGLOG_EVENTID): -+ wmi_dbglog_event_rx(wmip, datap, len); -+ break; -+ default: -+ A_DPRINTF(DBG_WMI|DBG_ERROR, -+ (DBGFMT "Unknown id 0x%x\n", DBGARG, id)); -+ wmip->wmi_stats.cmd_id_err++; -+ status = A_ERROR; -+ break; -+ } -+ -+ return status; -+} -+ -+/* -+ * Control Path -+ */ -+A_UINT32 cmdRecvNum; -+ -+A_STATUS -+wmi_control_rx(struct wmi_t *wmip, void *osbuf) -+{ -+ WMI_CMD_HDR *cmd; -+ A_UINT16 id; -+ A_UINT8 *datap; -+ A_UINT32 len, i, loggingReq; -+ A_STATUS status = A_OK; -+ -+ A_ASSERT(osbuf != NULL); -+ if (A_NETBUF_LEN(osbuf) < sizeof(WMI_CMD_HDR)) { -+ A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG)); -+ wmip->wmi_stats.cmd_len_err++; -+ A_NETBUF_FREE(osbuf); -+ return A_ERROR; -+ } -+ -+ cmd = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf); -+ id = cmd->commandId; -+ -+ if (A_NETBUF_PULL(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) { -+ A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG)); -+ wmip->wmi_stats.cmd_len_err++; -+ A_NETBUF_FREE(osbuf); -+ return A_ERROR; -+ } -+ -+ datap = A_NETBUF_DATA(osbuf); -+ len = A_NETBUF_LEN(osbuf); -+ -+ ar6000_get_driver_cfg(wmip->wmi_devt, -+ AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS, -+ &loggingReq); -+ -+ if(loggingReq) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI %d \n",id)); -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI recv, MsgNo %d : ", cmdRecvNum)); -+ for(i = 0; i < len; i++) -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("%x ", datap[i])); -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("\n")); -+ } -+ -+ LOCK_WMI(wmip); -+ cmdRecvNum++; -+ UNLOCK_WMI(wmip); -+ -+ switch (id) { -+ case (WMI_GET_BITRATE_CMDID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_BITRATE_CMDID\n", DBGARG)); -+ status = wmi_bitrate_reply_rx(wmip, datap, len); -+ break; -+ case (WMI_GET_CHANNEL_LIST_CMDID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_CHANNEL_LIST_CMDID\n", DBGARG)); -+ status = wmi_channelList_reply_rx(wmip, datap, len); -+ break; -+ case (WMI_GET_TX_PWR_CMDID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_TX_PWR_CMDID\n", DBGARG)); -+ status = wmi_txPwr_reply_rx(wmip, datap, len); -+ break; -+ case (WMI_READY_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_READY_EVENTID\n", DBGARG)); -+ status = wmi_ready_event_rx(wmip, datap, len); -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ A_WMI_DBGLOG_INIT_DONE(wmip->wmi_devt); -+ break; -+ case (WMI_CONNECT_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CONNECT_EVENTID\n", DBGARG)); -+ status = wmi_connect_event_rx(wmip, datap, len); -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ break; -+ case (WMI_DISCONNECT_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_DISCONNECT_EVENTID\n", DBGARG)); -+ status = wmi_disconnect_event_rx(wmip, datap, len); -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ break; -+ case (WMI_TKIP_MICERR_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TKIP_MICERR_EVENTID\n", DBGARG)); -+ status = wmi_tkip_micerr_event_rx(wmip, datap, len); -+ break; -+ case (WMI_BSSINFO_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_BSSINFO_EVENTID\n", DBGARG)); -+ status = wmi_bssInfo_event_rx(wmip, datap, len); -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ break; -+ case (WMI_REGDOMAIN_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REGDOMAIN_EVENTID\n", DBGARG)); -+ status = wmi_regDomain_event_rx(wmip, datap, len); -+ break; -+ case (WMI_PSTREAM_TIMEOUT_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_PSTREAM_TIMEOUT_EVENTID\n", DBGARG)); -+ status = wmi_pstream_timeout_event_rx(wmip, datap, len); -+ /* pstreams are fatpipe abstractions that get implicitly created. -+ * User apps only deal with thinstreams. creation of a thinstream -+ * by the user or data traffic flow in an AC triggers implicit -+ * pstream creation. Do we need to send this event to App..? -+ * no harm in sending it. -+ */ -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ break; -+ case (WMI_NEIGHBOR_REPORT_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_NEIGHBOR_REPORT_EVENTID\n", DBGARG)); -+ status = wmi_neighborReport_event_rx(wmip, datap, len); -+ break; -+ case (WMI_SCAN_COMPLETE_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SCAN_COMPLETE_EVENTID\n", DBGARG)); -+ status = wmi_scanComplete_rx(wmip, datap, len); -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ break; -+ case (WMI_CMDERROR_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CMDERROR_EVENTID\n", DBGARG)); -+ status = wmi_errorEvent_rx(wmip, datap, len); -+ break; -+ case (WMI_REPORT_STATISTICS_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_STATISTICS_EVENTID\n", DBGARG)); -+ status = wmi_statsEvent_rx(wmip, datap, len); -+ break; -+ case (WMI_RSSI_THRESHOLD_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_RSSI_THRESHOLD_EVENTID\n", DBGARG)); -+ status = wmi_rssiThresholdEvent_rx(wmip, datap, len); -+ break; -+ case (WMI_ERROR_REPORT_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_ERROR_REPORT_EVENTID\n", DBGARG)); -+ status = wmi_reportErrorEvent_rx(wmip, datap, len); -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ break; -+ case (WMI_OPT_RX_FRAME_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_OPT_RX_FRAME_EVENTID\n", DBGARG)); -+ status = wmi_opt_frame_event_rx(wmip, datap, len); -+ break; -+ case (WMI_REPORT_ROAM_TBL_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_TBL_EVENTID\n", DBGARG)); -+ status = wmi_roam_tbl_event_rx(wmip, datap, len); -+ break; -+ case (WMI_EXTENSION_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_EXTENSION_EVENTID\n", DBGARG)); -+ status = wmi_control_rx_xtnd(wmip, osbuf); -+ break; -+ case (WMI_CAC_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CAC_EVENTID\n", DBGARG)); -+ status = wmi_cac_event_rx(wmip, datap, len); -+ break; -+ case (WMI_REPORT_ROAM_DATA_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_DATA_EVENTID\n", DBGARG)); -+ status = wmi_roam_data_event_rx(wmip, datap, len); -+ break; -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+ case (WMI_TEST_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TEST_EVENTID\n", DBGARG)); -+ status = wmi_tcmd_test_report_rx(wmip, datap, len); -+ break; -+#endif -+ case (WMI_GET_FIXRATES_CMDID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_FIXRATES_CMDID\n", DBGARG)); -+ status = wmi_ratemask_reply_rx(wmip, datap, len); -+ break; -+ case (WMI_TX_RETRY_ERR_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TX_RETRY_ERR_EVENTID\n", DBGARG)); -+ status = wmi_txRetryErrEvent_rx(wmip, datap, len); -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ break; -+ case (WMI_SNR_THRESHOLD_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SNR_THRESHOLD_EVENTID\n", DBGARG)); -+ status = wmi_snrThresholdEvent_rx(wmip, datap, len); -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ break; -+ case (WMI_LQ_THRESHOLD_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_LQ_THRESHOLD_EVENTID\n", DBGARG)); -+ status = wmi_lqThresholdEvent_rx(wmip, datap, len); -+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); -+ break; -+ case (WMI_APLIST_EVENTID): -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Received APLIST Event\n")); -+ status = wmi_aplistEvent_rx(wmip, datap, len); -+ break; -+ case (WMI_GET_KEEPALIVE_CMDID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_KEEPALIVE_CMDID\n", DBGARG)); -+ status = wmi_keepalive_reply_rx(wmip, datap, len); -+ break; -+ case (WMI_GET_WOW_LIST_EVENTID): -+ status = wmi_get_wow_list_event_rx(wmip, datap, len); -+ break; -+ case (WMI_GET_PMKID_LIST_EVENTID): -+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_PMKID_LIST Event\n", DBGARG)); -+ status = wmi_get_pmkid_list_event_rx(wmip, datap, len); -+ break; -+ default: -+ A_DPRINTF(DBG_WMI|DBG_ERROR, -+ (DBGFMT "Unknown id 0x%x\n", DBGARG, id)); -+ wmip->wmi_stats.cmd_id_err++; -+ status = A_ERROR; -+ break; -+ } -+ -+ A_NETBUF_FREE(osbuf); -+ -+ return status; -+} -+ -+static A_STATUS -+wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_READY_EVENT *ev = (WMI_READY_EVENT *)datap; -+ -+ if (len < sizeof(WMI_READY_EVENT)) { -+ return A_EINVAL; -+ } -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ wmip->wmi_ready = TRUE; -+ A_WMI_READY_EVENT(wmip->wmi_devt, ev->macaddr, ev->phyCapability); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_CONNECT_EVENT *ev; -+ -+ if (len < sizeof(WMI_CONNECT_EVENT)) { -+ return A_EINVAL; -+ } -+ ev = (WMI_CONNECT_EVENT *)datap; -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "freq %d bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", -+ DBGARG, ev->channel, -+ ev->bssid[0], ev->bssid[1], ev->bssid[2], -+ ev->bssid[3], ev->bssid[4], ev->bssid[5])); -+ -+ A_MEMCPY(wmip->wmi_bssid, ev->bssid, ATH_MAC_LEN); -+ -+ A_WMI_CONNECT_EVENT(wmip->wmi_devt, ev->channel, ev->bssid, -+ ev->listenInterval, ev->beaconInterval, -+ ev->networkType, ev->beaconIeLen, -+ ev->assocReqLen, ev->assocRespLen, -+ ev->assocInfo); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_REG_DOMAIN_EVENT *ev; -+ -+ if (len < sizeof(*ev)) { -+ return A_EINVAL; -+ } -+ ev = (WMI_REG_DOMAIN_EVENT *)datap; -+ -+ A_WMI_REGDOMAIN_EVENT(wmip->wmi_devt, ev->regDomain); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_NEIGHBOR_REPORT_EVENT *ev; -+ int numAps; -+ -+ if (len < sizeof(*ev)) { -+ return A_EINVAL; -+ } -+ ev = (WMI_NEIGHBOR_REPORT_EVENT *)datap; -+ numAps = ev->numberOfAps; -+ -+ if (len < (int)(sizeof(*ev) + ((numAps - 1) * sizeof(WMI_NEIGHBOR_INFO)))) { -+ return A_EINVAL; -+ } -+ -+ A_WMI_NEIGHBORREPORT_EVENT(wmip->wmi_devt, numAps, ev->neighbor); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_DISCONNECT_EVENT *ev; -+ -+ if (len < sizeof(WMI_DISCONNECT_EVENT)) { -+ return A_EINVAL; -+ } -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ ev = (WMI_DISCONNECT_EVENT *)datap; -+ -+ A_MEMZERO(wmip->wmi_bssid, sizeof(wmip->wmi_bssid)); -+ -+ A_WMI_DISCONNECT_EVENT(wmip->wmi_devt, ev->disconnectReason, ev->bssid, -+ ev->assocRespLen, ev->assocInfo, ev->protocolReasonStatus); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_TKIP_MICERR_EVENT *ev; -+ -+ if (len < sizeof(*ev)) { -+ return A_EINVAL; -+ } -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ ev = (WMI_TKIP_MICERR_EVENT *)datap; -+ A_WMI_TKIP_MICERR_EVENT(wmip->wmi_devt, ev->keyid, ev->ismcast); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ bss_t *bss; -+ WMI_BSS_INFO_HDR *bih; -+ A_UINT8 *buf; -+ A_UINT32 nodeCachingAllowed; -+ -+ if (len <= sizeof(WMI_BSS_INFO_HDR)) { -+ return A_EINVAL; -+ } -+ -+ A_WMI_BSSINFO_EVENT_RX(wmip->wmi_devt, datap, len); -+ /* What is driver config for wlan node caching? */ -+ if(ar6000_get_driver_cfg(wmip->wmi_devt, -+ AR6000_DRIVER_CFG_GET_WLANNODECACHING, -+ &nodeCachingAllowed) != A_OK) { -+ return A_EINVAL; -+ } -+ -+ if(!nodeCachingAllowed) { -+ return A_OK; -+ } -+ -+ -+ bih = (WMI_BSS_INFO_HDR *)datap; -+ buf = datap + sizeof(WMI_BSS_INFO_HDR); -+ len -= sizeof(WMI_BSS_INFO_HDR); -+ -+ A_DPRINTF(DBG_WMI2, (DBGFMT "bssInfo event - ch %u, rssi %02x, " -+ "bssid \"%02x:%02x:%02x:%02x:%02x:%02x\"\n", DBGARG, -+ bih->channel, (unsigned char) bih->rssi, bih->bssid[0], -+ bih->bssid[1], bih->bssid[2], bih->bssid[3], bih->bssid[4], -+ bih->bssid[5])); -+ -+ if(wps_enable && (bih->frameType == PROBERESP_FTYPE) ) { -+ printk("%s() A_OK 2\n", __FUNCTION__); -+ return A_OK; -+ } -+ -+ bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid); -+ if (bss != NULL) { -+ /* -+ * Free up the node. Not the most efficient process given -+ * we are about to allocate a new node but it is simple and should be -+ * adequate. -+ */ -+ wlan_node_reclaim(&wmip->wmi_scan_table, bss); -+ } -+ -+ bss = wlan_node_alloc(&wmip->wmi_scan_table, len); -+ if (bss == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ bss->ni_snr = bih->snr; -+ bss->ni_rssi = bih->rssi; -+ A_ASSERT(bss->ni_buf != NULL); -+ A_MEMCPY(bss->ni_buf, buf, len); -+ -+ if (wlan_parse_beacon(bss->ni_buf, len, &bss->ni_cie) != A_OK) { -+ wlan_node_free(bss); -+ return A_EINVAL; -+ } -+ -+ /* -+ * Update the frequency in ie_chan, overwriting of channel number -+ * which is done in wlan_parse_beacon -+ */ -+ bss->ni_cie.ie_chan = bih->channel; -+ wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ bss_t *bss; -+ WMI_OPT_RX_INFO_HDR *bih; -+ A_UINT8 *buf; -+ -+ if (len <= sizeof(WMI_OPT_RX_INFO_HDR)) { -+ return A_EINVAL; -+ } -+ -+ bih = (WMI_OPT_RX_INFO_HDR *)datap; -+ buf = datap + sizeof(WMI_OPT_RX_INFO_HDR); -+ len -= sizeof(WMI_OPT_RX_INFO_HDR); -+ -+ A_DPRINTF(DBG_WMI2, (DBGFMT "opt frame event %2.2x:%2.2x\n", DBGARG, -+ bih->bssid[4], bih->bssid[5])); -+ -+ bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid); -+ if (bss != NULL) { -+ /* -+ * Free up the node. Not the most efficient process given -+ * we are about to allocate a new node but it is simple and should be -+ * adequate. -+ */ -+ wlan_node_reclaim(&wmip->wmi_scan_table, bss); -+ } -+ -+ bss = wlan_node_alloc(&wmip->wmi_scan_table, len); -+ if (bss == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ bss->ni_snr = bih->snr; -+ bss->ni_cie.ie_chan = bih->channel; -+ A_ASSERT(bss->ni_buf != NULL); -+ A_MEMCPY(bss->ni_buf, buf, len); -+ wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid); -+ -+ return A_OK; -+} -+ -+ /* This event indicates inactivity timeout of a fatpipe(pstream) -+ * at the target -+ */ -+static A_STATUS -+wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_PSTREAM_TIMEOUT_EVENT *ev; -+ -+ if (len < sizeof(WMI_PSTREAM_TIMEOUT_EVENT)) { -+ return A_EINVAL; -+ } -+ -+ A_DPRINTF(DBG_WMI, (DBGFMT "wmi_pstream_timeout_event_rx\n", DBGARG)); -+ -+ ev = (WMI_PSTREAM_TIMEOUT_EVENT *)datap; -+ -+ /* When the pstream (fat pipe == AC) timesout, it means there were no -+ * thinStreams within this pstream & it got implicitly created due to -+ * data flow on this AC. We start the inactivity timer only for -+ * implicitly created pstream. Just reset the host state. -+ */ -+ /* Set the activeTsids for this AC to 0 */ -+ LOCK_WMI(wmip); -+ wmip->wmi_streamExistsForAC[ev->trafficClass]=0; -+ wmip->wmi_fatPipeExists &= ~(1 << ev->trafficClass); -+ UNLOCK_WMI(wmip); -+ -+ /*Indicate inactivity to driver layer for this fatpipe (pstream)*/ -+ A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, ev->trafficClass); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_BIT_RATE_CMD *reply; -+ A_INT32 rate; -+ -+ if (len < sizeof(WMI_BIT_RATE_CMD)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_BIT_RATE_CMD *)datap; -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "Enter - rateindex %d\n", DBGARG, reply->rateIndex)); -+ -+ if (reply->rateIndex == RATE_AUTO) { -+ rate = RATE_AUTO; -+ } else { -+ rate = wmi_rateTable[(A_UINT32) reply->rateIndex]; -+ } -+ -+ A_WMI_BITRATE_RX(wmip->wmi_devt, rate); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_FIX_RATES_CMD *reply; -+ -+ if (len < sizeof(WMI_BIT_RATE_CMD)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_FIX_RATES_CMD *)datap; -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "Enter - fixed rate mask %x\n", DBGARG, reply->fixRateMask)); -+ -+ A_WMI_RATEMASK_RX(wmip->wmi_devt, reply->fixRateMask); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_CHANNEL_LIST_REPLY *reply; -+ -+ if (len < sizeof(WMI_CHANNEL_LIST_REPLY)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_CHANNEL_LIST_REPLY *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_CHANNELLIST_RX(wmip->wmi_devt, reply->numChannels, -+ reply->channelList); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_TX_PWR_REPLY *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_TX_PWR_REPLY *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_TXPWR_RX(wmip->wmi_devt, reply->dbM); -+ -+ return A_OK; -+} -+static A_STATUS -+wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_GET_KEEPALIVE_CMD *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_GET_KEEPALIVE_CMD *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_KEEPALIVE_RX(wmip->wmi_devt, reply->configured); -+ -+ return A_OK; -+} -+ -+ -+static A_STATUS -+wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMIX_DSETOPENREQ_EVENT *dsetopenreq; -+ -+ if (len < sizeof(WMIX_DSETOPENREQ_EVENT)) { -+ return A_EINVAL; -+ } -+ dsetopenreq = (WMIX_DSETOPENREQ_EVENT *)datap; -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "Enter - dset_id=0x%x\n", DBGARG, dsetopenreq->dset_id)); -+ A_WMI_DSET_OPEN_REQ(wmip->wmi_devt, -+ dsetopenreq->dset_id, -+ dsetopenreq->targ_dset_handle, -+ dsetopenreq->targ_reply_fn, -+ dsetopenreq->targ_reply_arg); -+ -+ return A_OK; -+} -+ -+#ifdef CONFIG_HOST_DSET_SUPPORT -+static A_STATUS -+wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMIX_DSETCLOSE_EVENT *dsetclose; -+ -+ if (len < sizeof(WMIX_DSETCLOSE_EVENT)) { -+ return A_EINVAL; -+ } -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ dsetclose = (WMIX_DSETCLOSE_EVENT *)datap; -+ A_WMI_DSET_CLOSE(wmip->wmi_devt, dsetclose->access_cookie); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMIX_DSETDATAREQ_EVENT *dsetdatareq; -+ -+ if (len < sizeof(WMIX_DSETDATAREQ_EVENT)) { -+ return A_EINVAL; -+ } -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ dsetdatareq = (WMIX_DSETDATAREQ_EVENT *)datap; -+ A_WMI_DSET_DATA_REQ(wmip->wmi_devt, -+ dsetdatareq->access_cookie, -+ dsetdatareq->offset, -+ dsetdatareq->length, -+ dsetdatareq->targ_buf, -+ dsetdatareq->targ_reply_fn, -+ dsetdatareq->targ_reply_arg); -+ -+ return A_OK; -+} -+#endif /* CONFIG_HOST_DSET_SUPPORT */ -+ -+static A_STATUS -+wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_SCAN_COMPLETE_EVENT *ev; -+ -+ ev = (WMI_SCAN_COMPLETE_EVENT *)datap; -+ A_WMI_SCANCOMPLETE_EVENT(wmip->wmi_devt, ev->status); -+ -+ return A_OK; -+} -+ -+/* -+ * Target is reporting a programming error. This is for -+ * developer aid only. Target only checks a few common violations -+ * and it is responsibility of host to do all error checking. -+ * Behavior of target after wmi error event is undefined. -+ * A reset is recommended. -+ */ -+static A_STATUS -+wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_CMD_ERROR_EVENT *ev; -+ -+ ev = (WMI_CMD_ERROR_EVENT *)datap; -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Programming Error: cmd=%d ", ev->commandId)); -+ switch (ev->errorCode) { -+ case (INVALID_PARAM): -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal Parameter\n")); -+ break; -+ case (ILLEGAL_STATE): -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal State\n")); -+ break; -+ case (INTERNAL_ERROR): -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Internal Error\n")); -+ break; -+ } -+ -+ return A_OK; -+} -+ -+ -+static A_STATUS -+wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_TARGET_STATS *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_TARGET_STATS *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_TARGETSTATS_EVENT(wmip->wmi_devt, reply); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_RSSI_THRESHOLD_EVENT *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_RSSI_THRESHOLD_EVENT *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_RSSI_THRESHOLD_EVENT(wmip->wmi_devt, reply->range, reply->rssi); -+ -+ return A_OK; -+} -+ -+ -+static A_STATUS -+wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_TARGET_ERROR_REPORT_EVENT *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_TARGET_ERROR_REPORT_EVENT *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_REPORT_ERROR_EVENT(wmip->wmi_devt, reply->errorVal); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_CAC_EVENT *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_CAC_EVENT *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_CAC_EVENT(wmip->wmi_devt, reply->ac, -+ reply->cac_indication, reply->statusCode, -+ reply->tspecSuggestion); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMIX_HB_CHALLENGE_RESP_EVENT *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMIX_HB_CHALLENGE_RESP_EVENT *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "wmi: challenge response event\n", DBGARG)); -+ -+ A_WMI_HBCHALLENGERESP_EVENT(wmip->wmi_devt, reply->cookie, reply->source); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_TARGET_ROAM_TBL *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_TARGET_ROAM_TBL *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_ROAM_TABLE_EVENT(wmip->wmi_devt, reply); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_TARGET_ROAM_DATA *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_TARGET_ROAM_DATA *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_ROAM_DATA_EVENT(wmip->wmi_devt, reply); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_TX_RETRY_ERR_EVENT *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_TX_RETRY_ERR_EVENT *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_TX_RETRY_ERR_EVENT(wmip->wmi_devt); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_SNR_THRESHOLD_EVENT *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_SNR_THRESHOLD_EVENT *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_SNR_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->snr); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_LQ_THRESHOLD_EVENT *reply; -+ -+ if (len < sizeof(*reply)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_LQ_THRESHOLD_EVENT *)datap; -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_LQ_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->lq); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ A_UINT16 ap_info_entry_size; -+ WMI_APLIST_EVENT *ev = (WMI_APLIST_EVENT *)datap; -+ WMI_AP_INFO_V1 *ap_info_v1; -+ A_UINT8 i; -+ -+ if (len < sizeof(WMI_APLIST_EVENT)) { -+ return A_EINVAL; -+ } -+ -+ if (ev->apListVer == APLIST_VER1) { -+ ap_info_entry_size = sizeof(WMI_AP_INFO_V1); -+ ap_info_v1 = (WMI_AP_INFO_V1 *)ev->apList; -+ } else { -+ return A_EINVAL; -+ } -+ -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Number of APs in APLIST Event is %d\n", ev->numAP)); -+ if (len < (int)(sizeof(WMI_APLIST_EVENT) + -+ (ev->numAP - 1) * ap_info_entry_size)) -+ { -+ return A_EINVAL; -+ } -+ -+ /* -+ * AP List Ver1 Contents -+ */ -+ for (i = 0; i < ev->numAP; i++) { -+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("AP#%d BSSID %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x "\ -+ "Channel %d\n", i, -+ ap_info_v1->bssid[0], ap_info_v1->bssid[1], -+ ap_info_v1->bssid[2], ap_info_v1->bssid[3], -+ ap_info_v1->bssid[4], ap_info_v1->bssid[5], -+ ap_info_v1->channel)); -+ ap_info_v1++; -+ } -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ A_UINT32 dropped; -+ -+ dropped = *((A_UINT32 *)datap); -+ datap += sizeof(dropped); -+ len -= sizeof(dropped); -+ A_WMI_DBGLOG_EVENT(wmip->wmi_devt, dropped, datap, len); -+ return A_OK; -+} -+ -+#ifdef CONFIG_HOST_GPIO_SUPPORT -+static A_STATUS -+wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMIX_GPIO_INTR_EVENT *gpio_intr = (WMIX_GPIO_INTR_EVENT *)datap; -+ -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "Enter - intrmask=0x%x input=0x%x.\n", DBGARG, -+ gpio_intr->intr_mask, gpio_intr->input_values)); -+ -+ A_WMI_GPIO_INTR_RX(gpio_intr->intr_mask, gpio_intr->input_values); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMIX_GPIO_DATA_EVENT *gpio_data = (WMIX_GPIO_DATA_EVENT *)datap; -+ -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG, -+ gpio_data->reg_id, gpio_data->value)); -+ -+ A_WMI_GPIO_DATA_RX(gpio_data->reg_id, gpio_data->value); -+ -+ return A_OK; -+} -+ -+static A_STATUS -+wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_GPIO_ACK_RX(); -+ -+ return A_OK; -+} -+#endif /* CONFIG_HOST_GPIO_SUPPORT */ -+ -+/* -+ * Called to send a wmi command. Command specific data is already built -+ * on osbuf and current osbuf->data points to it. -+ */ -+A_STATUS -+wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId, -+ WMI_SYNC_FLAG syncflag) -+{ -+#define IS_LONG_CMD(cmdId) ((cmdId == WMI_OPT_TX_FRAME_CMDID) || (cmdId == WMI_ADD_WOW_PATTERN_CMDID)) -+ WMI_CMD_HDR *cHdr; -+ WMI_PRI_STREAM_ID streamID = WMI_CONTROL_PRI; -+ -+ A_ASSERT(osbuf != NULL); -+ -+ if (syncflag >= END_WMIFLAG) { -+ return A_EINVAL; -+ } -+ -+ if ((syncflag == SYNC_BEFORE_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) { -+ /* -+ * We want to make sure all data currently queued is transmitted before -+ * the cmd execution. Establish a new sync point. -+ */ -+ wmi_sync_point(wmip); -+ } -+ -+ if (A_NETBUF_PUSH(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) { -+ return A_NO_MEMORY; -+ } -+ -+ cHdr = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf); -+ cHdr->commandId = cmdId; -+ -+ /* -+ * Send cmd, some via control pipe, others via data pipe -+ */ -+ if (IS_LONG_CMD(cmdId)) { -+ wmi_data_hdr_add(wmip, osbuf, CNTL_MSGTYPE); -+ // TODO ... these can now go through the control endpoint via HTC 2.0 -+ streamID = WMI_BEST_EFFORT_PRI; -+ } -+ A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID); -+ -+ if ((syncflag == SYNC_AFTER_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) { -+ /* -+ * We want to make sure all new data queued waits for the command to -+ * execute. Establish a new sync point. -+ */ -+ wmi_sync_point(wmip); -+ } -+ return (A_OK); -+#undef IS_LONG_CMD -+} -+ -+A_STATUS -+wmi_cmd_send_xtnd(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId, -+ WMI_SYNC_FLAG syncflag) -+{ -+ WMIX_CMD_HDR *cHdr; -+ -+ if (A_NETBUF_PUSH(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) { -+ return A_NO_MEMORY; -+ } -+ -+ cHdr = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf); -+ cHdr->commandId = cmdId; -+ -+ return wmi_cmd_send(wmip, osbuf, WMI_EXTENSION_CMDID, syncflag); -+} -+ -+A_STATUS -+wmi_connect_cmd(struct wmi_t *wmip, NETWORK_TYPE netType, -+ DOT11_AUTH_MODE dot11AuthMode, AUTH_MODE authMode, -+ CRYPTO_TYPE pairwiseCrypto, A_UINT8 pairwiseCryptoLen, -+ CRYPTO_TYPE groupCrypto,A_UINT8 groupCryptoLen, -+ int ssidLength, A_UCHAR *ssid, -+ A_UINT8 *bssid, A_UINT16 channel, A_UINT32 ctrl_flags) -+{ -+ void *osbuf; -+ WMI_CONNECT_CMD *cc; -+ -+ if ((pairwiseCrypto == NONE_CRYPT) && (groupCrypto != NONE_CRYPT)) { -+ return A_EINVAL; -+ } -+ if ((pairwiseCrypto != NONE_CRYPT) && (groupCrypto == NONE_CRYPT)) { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(WMI_CONNECT_CMD)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(WMI_CONNECT_CMD)); -+ -+ cc = (WMI_CONNECT_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cc, sizeof(*cc)); -+ -+ A_MEMCPY(cc->ssid, ssid, ssidLength); -+ cc->ssidLength = ssidLength; -+ cc->networkType = netType; -+ cc->dot11AuthMode = dot11AuthMode; -+ cc->authMode = authMode; -+ cc->pairwiseCryptoType = pairwiseCrypto; -+ cc->pairwiseCryptoLen = pairwiseCryptoLen; -+ cc->groupCryptoType = groupCrypto; -+ cc->groupCryptoLen = groupCryptoLen; -+ cc->channel = channel; -+ cc->ctrl_flags = ctrl_flags; -+ -+ if (bssid != NULL) { -+ A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN); -+ } -+ if (wmi_set_keepalive_cmd(wmip, wmip->wmi_keepaliveInterval) != A_OK) { -+ return(A_ERROR); -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_CONNECT_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_reconnect_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT16 channel) -+{ -+ void *osbuf; -+ WMI_RECONNECT_CMD *cc; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(WMI_RECONNECT_CMD)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(WMI_RECONNECT_CMD)); -+ -+ cc = (WMI_RECONNECT_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cc, sizeof(*cc)); -+ -+ cc->channel = channel; -+ -+ if (bssid != NULL) { -+ A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN); -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_RECONNECT_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_disconnect_cmd(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ A_STATUS status; -+ -+ osbuf = A_NETBUF_ALLOC(0); /* no payload */ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ /* Bug fix for 24817(elevator bug) - the disconnect command does not -+ need to do a SYNC before.*/ -+ status = (wmi_cmd_send(wmip, osbuf, WMI_DISCONNECT_CMDID, -+ NO_SYNC_WMIFLAG)); -+ -+ return status; -+} -+ -+A_STATUS -+wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType, -+ A_BOOL forceFgScan, A_BOOL isLegacy, -+ A_UINT32 homeDwellTime, A_UINT32 forceScanInterval) -+{ -+ void *osbuf; -+ WMI_START_SCAN_CMD *sc; -+ -+ if ((scanType != WMI_LONG_SCAN) && (scanType != WMI_SHORT_SCAN)) { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*sc)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*sc)); -+ -+ sc = (WMI_START_SCAN_CMD *)(A_NETBUF_DATA(osbuf)); -+ sc->scanType = scanType; -+ sc->forceFgScan = forceFgScan; -+ sc->isLegacy = isLegacy; -+ sc->homeDwellTime = homeDwellTime; -+ sc->forceScanInterval = forceScanInterval; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_START_SCAN_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec, -+ A_UINT16 fg_end_sec, A_UINT16 bg_sec, -+ A_UINT16 minact_chdw_msec, A_UINT16 maxact_chdw_msec, -+ A_UINT16 pas_chdw_msec, -+ A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags, -+ A_UINT32 max_dfsch_act_time) -+{ -+ void *osbuf; -+ WMI_SCAN_PARAMS_CMD *sc; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*sc)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*sc)); -+ -+ sc = (WMI_SCAN_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(sc, sizeof(*sc)); -+ sc->fg_start_period = fg_start_sec; -+ sc->fg_end_period = fg_end_sec; -+ sc->bg_period = bg_sec; -+ sc->minact_chdwell_time = minact_chdw_msec; -+ sc->maxact_chdwell_time = maxact_chdw_msec; -+ sc->pas_chdwell_time = pas_chdw_msec; -+ sc->shortScanRatio = shScanRatio; -+ sc->scanCtrlFlags = scanCtrlFlags; -+ sc->max_dfsch_act_time = max_dfsch_act_time; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_SCAN_PARAMS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask) -+{ -+ void *osbuf; -+ WMI_BSS_FILTER_CMD *cmd; -+ -+ if (filter >= LAST_BSS_FILTER) { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_BSS_FILTER_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->bssFilter = filter; -+ cmd->ieMask = ieMask; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BSS_FILTER_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag, -+ A_UINT8 ssidLength, A_UCHAR *ssid) -+{ -+ void *osbuf; -+ WMI_PROBED_SSID_CMD *cmd; -+ -+ if (index > MAX_PROBED_SSID_INDEX) { -+ return A_EINVAL; -+ } -+ if (ssidLength > sizeof(cmd->ssid)) { -+ return A_EINVAL; -+ } -+ if ((flag & (DISABLE_SSID_FLAG | ANY_SSID_FLAG)) && (ssidLength > 0)) { -+ return A_EINVAL; -+ } -+ if ((flag & SPECIFIC_SSID_FLAG) && !ssidLength) { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_PROBED_SSID_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->entryIndex = index; -+ cmd->flag = flag; -+ cmd->ssidLength = ssidLength; -+ A_MEMCPY(cmd->ssid, ssid, ssidLength); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_PROBED_SSID_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons) -+{ -+ void *osbuf; -+ WMI_LISTEN_INT_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_LISTEN_INT_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->listenInterval = listenInterval; -+ cmd->numBeacons = listenBeacons; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_LISTEN_INT_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmissTime, A_UINT16 bmissBeacons) -+{ -+ void *osbuf; -+ WMI_BMISS_TIME_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_BMISS_TIME_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->bmissTime = bmissTime; -+ cmd->numBeacons = bmissBeacons; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BMISS_TIME_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType, -+ A_UINT8 ieLen, A_UINT8 *ieInfo) -+{ -+ void *osbuf; -+ WMI_SET_ASSOC_INFO_CMD *cmd; -+ A_UINT16 cmdLen; -+ -+ cmdLen = sizeof(*cmd) + ieLen - 1; -+ osbuf = A_NETBUF_ALLOC(cmdLen); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, cmdLen); -+ -+ cmd = (WMI_SET_ASSOC_INFO_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, cmdLen); -+ cmd->ieType = ieType; -+ cmd->bufferSize = ieLen; -+ A_MEMCPY(cmd->assocInfo, ieInfo, ieLen); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_ASSOC_INFO_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode) -+{ -+ void *osbuf; -+ WMI_POWER_MODE_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_POWER_MODE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->powerMode = powerMode; -+ wmip->wmi_powerMode = powerMode; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_MODE_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl, -+ A_UINT16 atim_windows, A_UINT16 timeout_value) -+{ -+ void *osbuf; -+ WMI_IBSS_PM_CAPS_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_IBSS_PM_CAPS_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->power_saving = pmEnable; -+ cmd->ttl = ttl; -+ cmd->atim_windows = atim_windows; -+ cmd->timeout_value = timeout_value; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_IBSS_PM_CAPS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod, -+ A_UINT16 psPollNum, A_UINT16 dtimPolicy) -+{ -+ void *osbuf; -+ WMI_POWER_PARAMS_CMD *pm; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*pm)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*pm)); -+ -+ pm = (WMI_POWER_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(pm, sizeof(*pm)); -+ pm->idle_period = idlePeriod; -+ pm->pspoll_number = psPollNum; -+ pm->dtim_policy = dtimPolicy; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_PARAMS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout) -+{ -+ void *osbuf; -+ WMI_DISC_TIMEOUT_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_DISC_TIMEOUT_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->disconnectTimeout = timeout; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_DISC_TIMEOUT_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex, CRYPTO_TYPE keyType, -+ A_UINT8 keyUsage, A_UINT8 keyLength, A_UINT8 *keyRSC, -+ A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl, -+ WMI_SYNC_FLAG sync_flag) -+{ -+ void *osbuf; -+ WMI_ADD_CIPHER_KEY_CMD *cmd; -+ -+ if ((keyIndex > WMI_MAX_KEY_INDEX) || (keyLength > WMI_MAX_KEY_LEN) || -+ (keyMaterial == NULL)) -+ { -+ return A_EINVAL; -+ } -+ -+ if ((WEP_CRYPT != keyType) && (NULL == keyRSC)) { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_ADD_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->keyIndex = keyIndex; -+ cmd->keyType = keyType; -+ cmd->keyUsage = keyUsage; -+ cmd->keyLength = keyLength; -+ A_MEMCPY(cmd->key, keyMaterial, keyLength); -+ if (NULL != keyRSC) { -+ A_MEMCPY(cmd->keyRSC, keyRSC, sizeof(cmd->keyRSC)); -+ } -+ cmd->key_op_ctrl = key_op_ctrl; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_ADD_CIPHER_KEY_CMDID, sync_flag)); -+} -+ -+A_STATUS -+wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk) -+{ -+ void *osbuf; -+ WMI_ADD_KRK_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_ADD_KRK_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ A_MEMCPY(cmd->krk, krk, WMI_KRK_LEN); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_ADD_KRK_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_delete_krk_cmd(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ osbuf = A_NETBUF_ALLOC(0); -+ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_KRK_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex) -+{ -+ void *osbuf; -+ WMI_DELETE_CIPHER_KEY_CMD *cmd; -+ -+ if (keyIndex > WMI_MAX_KEY_INDEX) { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_DELETE_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->keyIndex = keyIndex; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_CIPHER_KEY_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId, -+ A_BOOL set) -+{ -+ void *osbuf; -+ WMI_SET_PMKID_CMD *cmd; -+ -+ if (bssid == NULL) { -+ return A_EINVAL; -+ } -+ -+ if ((set == TRUE) && (pmkId == NULL)) { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_PMKID_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid)); -+ if (set == TRUE) { -+ A_MEMCPY(cmd->pmkid, pmkId, sizeof(cmd->pmkid)); -+ cmd->enable = PMKID_ENABLE; -+ } else { -+ A_MEMZERO(cmd->pmkid, sizeof(cmd->pmkid)); -+ cmd->enable = PMKID_DISABLE; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en) -+{ -+ void *osbuf; -+ WMI_SET_TKIP_COUNTERMEASURES_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_TKIP_COUNTERMEASURES_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->cm_en = (en == TRUE)? WMI_TKIP_CM_ENABLE : WMI_TKIP_CM_DISABLE; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_TKIP_COUNTERMEASURES_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_akmp_params_cmd(struct wmi_t *wmip, -+ WMI_SET_AKMP_PARAMS_CMD *akmpParams) -+{ -+ void *osbuf; -+ WMI_SET_AKMP_PARAMS_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ cmd = (WMI_SET_AKMP_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->akmpInfo = akmpParams->akmpInfo; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_AKMP_PARAMS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_pmkid_list_cmd(struct wmi_t *wmip, -+ WMI_SET_PMKID_LIST_CMD *pmkInfo) -+{ -+ void *osbuf; -+ WMI_SET_PMKID_LIST_CMD *cmd; -+ A_UINT16 cmdLen; -+ A_UINT8 i; -+ -+ cmdLen = sizeof(pmkInfo->numPMKID) + -+ pmkInfo->numPMKID * sizeof(WMI_PMKID); -+ -+ osbuf = A_NETBUF_ALLOC(cmdLen); -+ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, cmdLen); -+ cmd = (WMI_SET_PMKID_LIST_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->numPMKID = pmkInfo->numPMKID; -+ -+ for (i = 0; i < cmd->numPMKID; i++) { -+ A_MEMCPY(&cmd->pmkidList[i], &pmkInfo->pmkidList[i], -+ WMI_PMKID_LEN); -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_LIST_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_get_pmkid_list_cmd(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ osbuf = A_NETBUF_ALLOC(0); /* no payload */ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_PMKID_LIST_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_dataSync_send(struct wmi_t *wmip, void *osbuf, WMI_PRI_STREAM_ID streamID) -+{ -+ WMI_DATA_HDR *dtHdr; -+ -+ A_ASSERT(streamID != WMI_CONTROL_PRI); -+ A_ASSERT(osbuf != NULL); -+ -+ if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) { -+ return A_NO_MEMORY; -+ } -+ -+ dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf); -+ dtHdr->info = -+ (SYNC_MSGTYPE & WMI_DATA_HDR_MSG_TYPE_MASK) << WMI_DATA_HDR_MSG_TYPE_SHIFT; -+ -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter - streamID %d\n", DBGARG, streamID)); -+ -+ return (A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID)); -+} -+ -+typedef struct _WMI_DATA_SYNC_BUFS { -+ A_UINT8 trafficClass; -+ void *osbuf; -+}WMI_DATA_SYNC_BUFS; -+ -+static A_STATUS -+wmi_sync_point(struct wmi_t *wmip) -+{ -+ void *cmd_osbuf; -+ WMI_DATA_SYNC_BUFS dataSyncBufs[WMM_NUM_AC]; -+ A_UINT8 i,numPriStreams=0; -+ A_STATUS status; -+ -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ memset(dataSyncBufs,0,sizeof(dataSyncBufs)); -+ -+ /* lock out while we walk through the priority list and assemble our local array */ -+ LOCK_WMI(wmip); -+ -+ for (i=0; i < WMM_NUM_AC ; i++) { -+ if (wmip->wmi_fatPipeExists & (1 << i)) { -+ numPriStreams++; -+ dataSyncBufs[numPriStreams-1].trafficClass = i; -+ } -+ } -+ -+ UNLOCK_WMI(wmip); -+ -+ /* dataSyncBufs is now filled with entries (starting at index 0) containing valid streamIDs */ -+ -+ do { -+ /* -+ * We allocate all network buffers needed so we will be able to -+ * send all required frames. -+ */ -+ cmd_osbuf = A_NETBUF_ALLOC(0); /* no payload */ -+ if (cmd_osbuf == NULL) { -+ status = A_NO_MEMORY; -+ break; -+ } -+ -+ for (i=0; i < numPriStreams ; i++) { -+ dataSyncBufs[i].osbuf = A_NETBUF_ALLOC(0); -+ if (dataSyncBufs[i].osbuf == NULL) { -+ status = A_NO_MEMORY; -+ break; -+ } -+ } //end for -+ -+ /* -+ * Send sync cmd followed by sync data messages on all endpoints being -+ * used -+ */ -+ status = wmi_cmd_send(wmip, cmd_osbuf, WMI_SYNCHRONIZE_CMDID, -+ NO_SYNC_WMIFLAG); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ /* cmd buffer sent, we no longer own it */ -+ cmd_osbuf = NULL; -+ -+ for(i=0; i < numPriStreams; i++) { -+ A_ASSERT(dataSyncBufs[i].osbuf != NULL); -+ -+ status = wmi_dataSync_send(wmip, dataSyncBufs[i].osbuf, -+ WMI_ACCESSCATEGORY_WMISTREAM(wmip,dataSyncBufs[i].trafficClass)); -+ -+ if (A_FAILED(status)) { -+ break; -+ } -+ /* we don't own this buffer anymore, NULL it out of the array so it -+ * won't get cleaned up */ -+ dataSyncBufs[i].osbuf = NULL; -+ } //end for -+ -+ } while(FALSE); -+ -+ /* free up any resources left over (possibly due to an error) */ -+ -+ if (cmd_osbuf != NULL) { -+ A_NETBUF_FREE(cmd_osbuf); -+ } -+ -+ for (i = 0; i < numPriStreams; i++) { -+ if (dataSyncBufs[i].osbuf != NULL) { -+ A_NETBUF_FREE(dataSyncBufs[i].osbuf); -+ } -+ } -+ -+ return (status); -+} -+ -+A_STATUS -+wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *params) -+{ -+ void *osbuf; -+ WMI_CREATE_PSTREAM_CMD *cmd; -+ A_UINT16 activeTsids=0; -+ A_UINT8 fatPipeExistsForAC=0; -+ -+ /* Validate all the parameters. */ -+ if( !((params->userPriority < 8) && -+ (params->userPriority <= 0x7) && -+ (convert_userPriority_to_trafficClass(params->userPriority) == params->trafficClass) && -+ (params->trafficDirection == UPLINK_TRAFFIC || -+ params->trafficDirection == DNLINK_TRAFFIC || -+ params->trafficDirection == BIDIR_TRAFFIC) && -+ (params->trafficType == TRAFFIC_TYPE_APERIODIC || -+ params->trafficType == TRAFFIC_TYPE_PERIODIC ) && -+ (params->voicePSCapability == DISABLE_FOR_THIS_AC || -+ params->voicePSCapability == ENABLE_FOR_THIS_AC || -+ params->voicePSCapability == ENABLE_FOR_ALL_AC) && -+ (params->tsid == WMI_IMPLICIT_PSTREAM || params->tsid <= WMI_MAX_THINSTREAM)) ) -+ { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "Sending create_pstream_cmd: ac=%d tsid:%d\n", DBGARG, -+ params->trafficClass, params->tsid)); -+ -+ cmd = (WMI_CREATE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ A_MEMCPY(cmd, params, sizeof(*cmd)); -+ -+ /* this is an implicitly created Fat pipe */ -+ if (params->tsid == WMI_IMPLICIT_PSTREAM) { -+ LOCK_WMI(wmip); -+ fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass)); -+ wmip->wmi_fatPipeExists |= (1<trafficClass); -+ UNLOCK_WMI(wmip); -+ } else { -+ /* this is an explicitly created thin stream within a fat pipe */ -+ LOCK_WMI(wmip); -+ fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass)); -+ activeTsids = wmip->wmi_streamExistsForAC[params->trafficClass]; -+ wmip->wmi_streamExistsForAC[params->trafficClass] |= (1<tsid); -+ /* if a thinstream becomes active, the fat pipe automatically -+ * becomes active -+ */ -+ wmip->wmi_fatPipeExists |= (1<trafficClass); -+ UNLOCK_WMI(wmip); -+ } -+ -+ /* Indicate activty change to driver layer only if this is the -+ * first TSID to get created in this AC explicitly or an implicit -+ * fat pipe is getting created. -+ */ -+ if (!fatPipeExistsForAC) { -+ A_WMI_STREAM_TX_ACTIVE(wmip->wmi_devt, params->trafficClass); -+ } -+ -+ /* mike: should be SYNC_BEFORE_WMIFLAG */ -+ return (wmi_cmd_send(wmip, osbuf, WMI_CREATE_PSTREAM_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 tsid) -+{ -+ void *osbuf; -+ WMI_DELETE_PSTREAM_CMD *cmd; -+ A_STATUS status; -+ A_UINT16 activeTsids=0; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_DELETE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ -+ cmd->trafficClass = trafficClass; -+ cmd->tsid = tsid; -+ -+ LOCK_WMI(wmip); -+ activeTsids = wmip->wmi_streamExistsForAC[trafficClass]; -+ UNLOCK_WMI(wmip); -+ -+ /* Check if the tsid was created & exists */ -+ if (!(activeTsids & (1<wmi_streamExistsForAC[trafficClass] &= ~(1<wmi_streamExistsForAC[trafficClass]; -+ UNLOCK_WMI(wmip); -+ -+ -+ /* Indicate stream inactivity to driver layer only if all tsids -+ * within this AC are deleted. -+ */ -+ if(!activeTsids) { -+ A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, trafficClass); -+ wmip->wmi_fatPipeExists &= ~(1<rateIndex = index; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BITRATE_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_get_bitrate_cmd(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ osbuf = A_NETBUF_ALLOC(0); /* no payload */ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_BITRATE_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+/* -+ * Returns TRUE iff the given rate index is legal in the current PHY mode. -+ */ -+A_BOOL -+wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex) -+{ -+ WMI_PHY_MODE phyMode = wmip->wmi_phyMode; -+ A_BOOL isValid = TRUE; -+ switch(phyMode) { -+ case WMI_11A_MODE: -+ if ((rateIndex < MODE_A_SUPPORT_RATE_START) || (rateIndex > MODE_A_SUPPORT_RATE_STOP)) { -+ isValid = FALSE; -+ } -+ break; -+ -+ case WMI_11B_MODE: -+ if ((rateIndex < MODE_B_SUPPORT_RATE_START) || (rateIndex > MODE_B_SUPPORT_RATE_STOP)) { -+ isValid = FALSE; -+ } -+ break; -+ -+ case WMI_11GONLY_MODE: -+ if ((rateIndex < MODE_GONLY_SUPPORT_RATE_START) || (rateIndex > MODE_GONLY_SUPPORT_RATE_STOP)) { -+ isValid = FALSE; -+ } -+ break; -+ -+ case WMI_11G_MODE: -+ case WMI_11AG_MODE: -+ if ((rateIndex < MODE_G_SUPPORT_RATE_START) || (rateIndex > MODE_G_SUPPORT_RATE_STOP)) { -+ isValid = FALSE; -+ } -+ break; -+ -+ default: -+ A_ASSERT(FALSE); -+ break; -+ } -+ -+ return isValid; -+} -+ -+A_INT8 -+wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate) -+{ -+ A_INT8 i; -+ if (rate != -1) -+ { -+ for (i=0;;i++) -+ { -+ if (wmi_rateTable[(A_UINT32) i] == 0) { -+ return A_EINVAL; -+ } -+ if (wmi_rateTable[(A_UINT32) i] == rate) { -+ break; -+ } -+ } -+ } -+ else{ -+ i = -1; -+ } -+ -+ if(wmi_is_bitrate_index_valid(wmip, i) != TRUE) { -+ return A_EINVAL; -+ } -+ -+ return i; -+} -+ -+A_STATUS -+wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask) -+{ -+ void *osbuf; -+ WMI_FIX_RATES_CMD *cmd; -+ A_UINT32 rateIndex; -+ -+ /* Make sure all rates in the mask are valid in the current PHY mode */ -+ for(rateIndex = 0; rateIndex < MAX_NUMBER_OF_SUPPORT_RATES; rateIndex++) { -+ if((1 << rateIndex) & (A_UINT32)fixRatesMask) { -+ if(wmi_is_bitrate_index_valid(wmip, rateIndex) != TRUE) { -+ A_DPRINTF(DBG_WMI, (DBGFMT "Set Fix Rates command failed: Given rate is illegal in current PHY mode\n", DBGARG)); -+ return A_EINVAL; -+ } -+ } -+ } -+ -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_FIX_RATES_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ -+ cmd->fixRateMask = fixRatesMask; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_FIXRATES_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_get_ratemask_cmd(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ osbuf = A_NETBUF_ALLOC(0); /* no payload */ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_FIXRATES_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_get_channelList_cmd(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ osbuf = A_NETBUF_ALLOC(0); /* no payload */ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_CHANNEL_LIST_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+/* -+ * used to generate a wmi sey channel Parameters cmd. -+ * mode should always be specified and corresponds to the phy mode of the -+ * wlan. -+ * numChan should alway sbe specified. If zero indicates that all available -+ * channels should be used. -+ * channelList is an array of channel frequencies (in Mhz) which the radio -+ * should limit its operation to. It should be NULL if numChan == 0. Size of -+ * array should correspond to numChan entries. -+ */ -+A_STATUS -+wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam, -+ WMI_PHY_MODE mode, A_INT8 numChan, -+ A_UINT16 *channelList) -+{ -+ void *osbuf; -+ WMI_CHANNEL_PARAMS_CMD *cmd; -+ A_INT8 size; -+ -+ size = sizeof (*cmd); -+ -+ if (numChan) { -+ if (numChan > WMI_MAX_CHANNELS) { -+ return A_EINVAL; -+ } -+ size += sizeof(A_UINT16) * (numChan - 1); -+ } -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_CHANNEL_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ -+ wmip->wmi_phyMode = mode; -+ cmd->scanParam = scanParam; -+ cmd->phyMode = mode; -+ cmd->numChannels = numChan; -+ A_MEMCPY(cmd->channelList, channelList, numChan * sizeof(A_UINT16)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_CHANNEL_PARAMS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_rssi_threshold_params(struct wmi_t *wmip, -+ WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd) -+{ -+ void *osbuf; -+ A_INT8 size; -+ WMI_RSSI_THRESHOLD_PARAMS_CMD *cmd; -+ /* These values are in ascending order */ -+ if( rssiCmd->thresholdAbove6_Val <= rssiCmd->thresholdAbove5_Val || -+ rssiCmd->thresholdAbove5_Val <= rssiCmd->thresholdAbove4_Val || -+ rssiCmd->thresholdAbove4_Val <= rssiCmd->thresholdAbove3_Val || -+ rssiCmd->thresholdAbove3_Val <= rssiCmd->thresholdAbove2_Val || -+ rssiCmd->thresholdAbove2_Val <= rssiCmd->thresholdAbove1_Val || -+ rssiCmd->thresholdBelow6_Val <= rssiCmd->thresholdBelow5_Val || -+ rssiCmd->thresholdBelow5_Val <= rssiCmd->thresholdBelow4_Val || -+ rssiCmd->thresholdBelow4_Val <= rssiCmd->thresholdBelow3_Val || -+ rssiCmd->thresholdBelow3_Val <= rssiCmd->thresholdBelow2_Val || -+ rssiCmd->thresholdBelow2_Val <= rssiCmd->thresholdBelow1_Val) { -+ -+ return A_EINVAL; -+ } -+ -+ size = sizeof (*cmd); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_RSSI_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ A_MEMCPY(cmd, rssiCmd, sizeof(WMI_RSSI_THRESHOLD_PARAMS_CMD)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_RSSI_THRESHOLD_PARAMS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip, -+ WMI_SET_HOST_SLEEP_MODE_CMD *hostModeCmd) -+{ -+ void *osbuf; -+ A_INT8 size; -+ WMI_SET_HOST_SLEEP_MODE_CMD *cmd; -+ -+ if( hostModeCmd->awake == hostModeCmd->asleep) { -+ return A_EINVAL; -+ } -+ -+ size = sizeof (*cmd); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_SET_HOST_SLEEP_MODE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ A_MEMCPY(cmd, hostModeCmd, sizeof(WMI_SET_HOST_SLEEP_MODE_CMD)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_HOST_SLEEP_MODE_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_wow_mode_cmd(struct wmi_t *wmip, -+ WMI_SET_WOW_MODE_CMD *wowModeCmd) -+{ -+ void *osbuf; -+ A_INT8 size; -+ WMI_SET_WOW_MODE_CMD *cmd; -+ -+ size = sizeof (*cmd); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_SET_WOW_MODE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ A_MEMCPY(cmd, wowModeCmd, sizeof(WMI_SET_WOW_MODE_CMD)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WOW_MODE_CMDID, -+ NO_SYNC_WMIFLAG)); -+ -+} -+ -+A_STATUS -+wmi_get_wow_list_cmd(struct wmi_t *wmip, -+ WMI_GET_WOW_LIST_CMD *wowListCmd) -+{ -+ void *osbuf; -+ A_INT8 size; -+ WMI_GET_WOW_LIST_CMD *cmd; -+ -+ size = sizeof (*cmd); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_GET_WOW_LIST_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ A_MEMCPY(cmd, wowListCmd, sizeof(WMI_GET_WOW_LIST_CMD)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_WOW_LIST_CMDID, -+ NO_SYNC_WMIFLAG)); -+ -+} -+ -+static A_STATUS -+wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ WMI_GET_WOW_LIST_REPLY *reply; -+ -+ if (len < sizeof(WMI_GET_WOW_LIST_REPLY)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_GET_WOW_LIST_REPLY *)datap; -+ -+ A_WMI_WOW_LIST_EVENT(wmip->wmi_devt, reply->num_filters, -+ reply); -+ -+ return A_OK; -+} -+ -+A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip, -+ WMI_ADD_WOW_PATTERN_CMD *addWowCmd, -+ A_UINT8* pattern, A_UINT8* mask, -+ A_UINT8 pattern_size) -+{ -+ void *osbuf; -+ A_INT8 size; -+ WMI_ADD_WOW_PATTERN_CMD *cmd; -+ A_UINT8 *filter_mask = NULL; -+ -+ size = sizeof (*cmd); -+ -+ size += ((2 * addWowCmd->filter_size)* sizeof(A_UINT8)); -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_ADD_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->filter_list_id = addWowCmd->filter_list_id; -+ cmd->filter_offset = addWowCmd->filter_offset; -+ cmd->filter_size = addWowCmd->filter_size; -+ -+ A_MEMCPY(cmd->filter, pattern, addWowCmd->filter_size); -+ -+ filter_mask = (A_UINT8*)(cmd->filter + cmd->filter_size); -+ A_MEMCPY(filter_mask, mask, addWowCmd->filter_size); -+ -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_ADD_WOW_PATTERN_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_del_wow_pattern_cmd(struct wmi_t *wmip, -+ WMI_DEL_WOW_PATTERN_CMD *delWowCmd) -+{ -+ void *osbuf; -+ A_INT8 size; -+ WMI_DEL_WOW_PATTERN_CMD *cmd; -+ -+ size = sizeof (*cmd); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_DEL_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ A_MEMCPY(cmd, delWowCmd, sizeof(WMI_DEL_WOW_PATTERN_CMD)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_DEL_WOW_PATTERN_CMDID, -+ NO_SYNC_WMIFLAG)); -+ -+} -+ -+A_STATUS -+wmi_set_snr_threshold_params(struct wmi_t *wmip, -+ WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd) -+{ -+ void *osbuf; -+ A_INT8 size; -+ WMI_SNR_THRESHOLD_PARAMS_CMD *cmd; -+ /* These values are in ascending order */ -+ if( snrCmd->thresholdAbove4_Val <= snrCmd->thresholdAbove3_Val || -+ snrCmd->thresholdAbove3_Val <= snrCmd->thresholdAbove2_Val || -+ snrCmd->thresholdAbove2_Val <= snrCmd->thresholdAbove1_Val || -+ snrCmd->thresholdBelow4_Val <= snrCmd->thresholdBelow3_Val || -+ snrCmd->thresholdBelow3_Val <= snrCmd->thresholdBelow2_Val || -+ snrCmd->thresholdBelow2_Val <= snrCmd->thresholdBelow1_Val) { -+ -+ return A_EINVAL; -+ } -+ -+ size = sizeof (*cmd); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_SNR_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ A_MEMCPY(cmd, snrCmd, sizeof(WMI_SNR_THRESHOLD_PARAMS_CMD)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SNR_THRESHOLD_PARAMS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_clr_rssi_snr(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(int)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_CLR_RSSI_SNR_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_lq_threshold_params(struct wmi_t *wmip, -+ WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd) -+{ -+ void *osbuf; -+ A_INT8 size; -+ WMI_LQ_THRESHOLD_PARAMS_CMD *cmd; -+ /* These values are in ascending order */ -+ if( lqCmd->thresholdAbove4_Val <= lqCmd->thresholdAbove3_Val || -+ lqCmd->thresholdAbove3_Val <= lqCmd->thresholdAbove2_Val || -+ lqCmd->thresholdAbove2_Val <= lqCmd->thresholdAbove1_Val || -+ lqCmd->thresholdBelow4_Val <= lqCmd->thresholdBelow3_Val || -+ lqCmd->thresholdBelow3_Val <= lqCmd->thresholdBelow2_Val || -+ lqCmd->thresholdBelow2_Val <= lqCmd->thresholdBelow1_Val ) { -+ -+ return A_EINVAL; -+ } -+ -+ size = sizeof (*cmd); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_LQ_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ A_MEMCPY(cmd, lqCmd, sizeof(WMI_LQ_THRESHOLD_PARAMS_CMD)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_LQ_THRESHOLD_PARAMS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 mask) -+{ -+ void *osbuf; -+ A_INT8 size; -+ WMI_TARGET_ERROR_REPORT_BITMASK *cmd; -+ -+ size = sizeof (*cmd); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_TARGET_ERROR_REPORT_BITMASK *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ -+ cmd->bitmask = mask; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_TARGET_ERROR_REPORT_BITMASK_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie, A_UINT32 source) -+{ -+ void *osbuf; -+ WMIX_HB_CHALLENGE_RESP_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMIX_HB_CHALLENGE_RESP_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->cookie = cookie; -+ cmd->source = source; -+ -+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_HB_CHALLENGE_RESP_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask, -+ A_UINT16 tsr, A_BOOL rep, A_UINT16 size, -+ A_UINT32 valid) -+{ -+ void *osbuf; -+ WMIX_DBGLOG_CFG_MODULE_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMIX_DBGLOG_CFG_MODULE_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->config.cfgmmask = mmask; -+ cmd->config.cfgtsr = tsr; -+ cmd->config.cfgrep = rep; -+ cmd->config.cfgsize = size; -+ cmd->config.cfgvalid = valid; -+ -+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DBGLOG_CFG_MODULE_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_get_stats_cmd(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ osbuf = A_NETBUF_ALLOC(0); /* no payload */ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_STATISTICS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid) -+{ -+ void *osbuf; -+ WMI_ADD_BAD_AP_CMD *cmd; -+ -+ if ((bssid == NULL) || (apIndex > WMI_MAX_BAD_AP_INDEX)) { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_ADD_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->badApIndex = apIndex; -+ A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_ADD_BAD_AP_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex) -+{ -+ void *osbuf; -+ WMI_DELETE_BAD_AP_CMD *cmd; -+ -+ if (apIndex > WMI_MAX_BAD_AP_INDEX) { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_DELETE_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->badApIndex = apIndex; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_BAD_AP_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM) -+{ -+ void *osbuf; -+ WMI_SET_TX_PWR_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_TX_PWR_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->dbM = dbM; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_TX_PWR_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_get_txPwr_cmd(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ osbuf = A_NETBUF_ALLOC(0); /* no payload */ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_TX_PWR_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on) -+{ -+ WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0, -+ WMI_SHORTSCANRATIO_DEFAULT, -+ DEFAULT_SCAN_CTRL_FLAGS, -+ 0}; -+ -+ if (on) { -+ /* Enable foreground scanning */ -+ if (wmi_scanparams_cmd(wmip, scParams.fg_start_period, -+ scParams.fg_end_period, -+ scParams.bg_period, -+ scParams.minact_chdwell_time, -+ scParams.maxact_chdwell_time, -+ scParams.pas_chdwell_time, -+ scParams.shortScanRatio, -+ scParams.scanCtrlFlags, -+ scParams.max_dfsch_act_time) != A_OK) { -+ return -EIO; -+ } -+ } else { -+ wmi_disconnect_cmd(wmip); -+ if (wmi_scanparams_cmd(wmip, 0xFFFF, 0, 0, 0, -+ 0, 0, 0, 0xFF, 0) != A_OK) { -+ return -EIO; -+ } -+ } -+ -+ return A_OK; -+} -+ -+ -+A_UINT16 -+wmi_get_mapped_qos_queue(struct wmi_t *wmip, A_UINT8 trafficClass) -+{ -+ A_UINT16 activeTsids=0; -+ -+ LOCK_WMI(wmip); -+ activeTsids = wmip->wmi_streamExistsForAC[trafficClass]; -+ UNLOCK_WMI(wmip); -+ -+ return activeTsids; -+} -+ -+A_STATUS -+wmi_get_roam_tbl_cmd(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ osbuf = A_NETBUF_ALLOC(0); /* no payload */ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_TBL_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType) -+{ -+ void *osbuf; -+ A_UINT32 size = sizeof(A_UINT8); -+ WMI_TARGET_ROAM_DATA *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(size); /* no payload */ -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_TARGET_ROAM_DATA *)(A_NETBUF_DATA(osbuf)); -+ cmd->roamDataType = roamDataType; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_DATA_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p, -+ A_UINT8 size) -+{ -+ void *osbuf; -+ WMI_SET_ROAM_CTRL_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_SET_ROAM_CTRL_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ -+ A_MEMCPY(cmd, p, size); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_ROAM_CTRL_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_powersave_timers_cmd(struct wmi_t *wmip, -+ WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd, -+ A_UINT8 size) -+{ -+ void *osbuf; -+ WMI_POWERSAVE_TIMERS_POLICY_CMD *cmd; -+ -+ /* These timers can't be zero */ -+ if(!pCmd->psPollTimeout || !pCmd->triggerTimeout || -+ !(pCmd->apsdTimPolicy == IGNORE_TIM_ALL_QUEUES_APSD || -+ pCmd->apsdTimPolicy == PROCESS_TIM_ALL_QUEUES_APSD) || -+ !(pCmd->simulatedAPSDTimPolicy == IGNORE_TIM_SIMULATED_APSD || -+ pCmd->simulatedAPSDTimPolicy == PROCESS_TIM_SIMULATED_APSD)) -+ return A_EINVAL; -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, size); -+ -+ cmd = (WMI_POWERSAVE_TIMERS_POLICY_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, size); -+ -+ A_MEMCPY(cmd, pCmd, size); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+#ifdef CONFIG_HOST_GPIO_SUPPORT -+/* Send a command to Target to change GPIO output pins. */ -+A_STATUS -+wmi_gpio_output_set(struct wmi_t *wmip, -+ A_UINT32 set_mask, -+ A_UINT32 clear_mask, -+ A_UINT32 enable_mask, -+ A_UINT32 disable_mask) -+{ -+ void *osbuf; -+ WMIX_GPIO_OUTPUT_SET_CMD *output_set; -+ int size; -+ -+ size = sizeof(*output_set); -+ -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "Enter - set=0x%x clear=0x%x enb=0x%x dis=0x%x\n", DBGARG, -+ set_mask, clear_mask, enable_mask, disable_mask)); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ A_NETBUF_PUT(osbuf, size); -+ output_set = (WMIX_GPIO_OUTPUT_SET_CMD *)(A_NETBUF_DATA(osbuf)); -+ -+ output_set->set_mask = set_mask; -+ output_set->clear_mask = clear_mask; -+ output_set->enable_mask = enable_mask; -+ output_set->disable_mask = disable_mask; -+ -+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_OUTPUT_SET_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+/* Send a command to the Target requesting state of the GPIO input pins */ -+A_STATUS -+wmi_gpio_input_get(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ osbuf = A_NETBUF_ALLOC(0); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INPUT_GET_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+/* Send a command to the Target that changes the value of a GPIO register. */ -+A_STATUS -+wmi_gpio_register_set(struct wmi_t *wmip, -+ A_UINT32 gpioreg_id, -+ A_UINT32 value) -+{ -+ void *osbuf; -+ WMIX_GPIO_REGISTER_SET_CMD *register_set; -+ int size; -+ -+ size = sizeof(*register_set); -+ -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG, gpioreg_id, value)); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ A_NETBUF_PUT(osbuf, size); -+ register_set = (WMIX_GPIO_REGISTER_SET_CMD *)(A_NETBUF_DATA(osbuf)); -+ -+ register_set->gpioreg_id = gpioreg_id; -+ register_set->value = value; -+ -+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_SET_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+/* Send a command to the Target to fetch the value of a GPIO register. */ -+A_STATUS -+wmi_gpio_register_get(struct wmi_t *wmip, -+ A_UINT32 gpioreg_id) -+{ -+ void *osbuf; -+ WMIX_GPIO_REGISTER_GET_CMD *register_get; -+ int size; -+ -+ size = sizeof(*register_get); -+ -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter - reg=%d\n", DBGARG, gpioreg_id)); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ A_NETBUF_PUT(osbuf, size); -+ register_get = (WMIX_GPIO_REGISTER_GET_CMD *)(A_NETBUF_DATA(osbuf)); -+ -+ register_get->gpioreg_id = gpioreg_id; -+ -+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_GET_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+/* Send a command to the Target acknowledging some GPIO interrupts. */ -+A_STATUS -+wmi_gpio_intr_ack(struct wmi_t *wmip, -+ A_UINT32 ack_mask) -+{ -+ void *osbuf; -+ WMIX_GPIO_INTR_ACK_CMD *intr_ack; -+ int size; -+ -+ size = sizeof(*intr_ack); -+ -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter ack_mask=0x%x\n", DBGARG, ack_mask)); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ A_NETBUF_PUT(osbuf, size); -+ intr_ack = (WMIX_GPIO_INTR_ACK_CMD *)(A_NETBUF_DATA(osbuf)); -+ -+ intr_ack->ack_mask = ack_mask; -+ -+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INTR_ACK_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+#endif /* CONFIG_HOST_GPIO_SUPPORT */ -+ -+A_STATUS -+wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop, A_UINT8 eCWmin, -+ A_UINT8 eCWmax, A_UINT8 aifsn) -+{ -+ void *osbuf; -+ WMI_SET_ACCESS_PARAMS_CMD *cmd; -+ -+ if ((eCWmin > WMI_MAX_CW_ACPARAM) || (eCWmax > WMI_MAX_CW_ACPARAM) || -+ (aifsn > WMI_MAX_AIFSN_ACPARAM)) -+ { -+ return A_EINVAL; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_ACCESS_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->txop = txop; -+ cmd->eCWmin = eCWmin; -+ cmd->eCWmax = eCWmax; -+ cmd->aifsn = aifsn; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_ACCESS_PARAMS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType, -+ A_UINT8 trafficClass, A_UINT8 maxRetries, -+ A_UINT8 enableNotify) -+{ -+ void *osbuf; -+ WMI_SET_RETRY_LIMITS_CMD *cmd; -+ -+ if ((frameType != MGMT_FRAMETYPE) && (frameType != CONTROL_FRAMETYPE) && -+ (frameType != DATA_FRAMETYPE)) -+ { -+ return A_EINVAL; -+ } -+ -+ if (maxRetries > WMI_MAX_RETRIES) { -+ return A_EINVAL; -+ } -+ -+ if (frameType != DATA_FRAMETYPE) { -+ trafficClass = 0; -+ } -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_RETRY_LIMITS_CMD *)(A_NETBUF_DATA(osbuf)); -+ cmd->frameType = frameType; -+ cmd->trafficClass = trafficClass; -+ cmd->maxRetries = maxRetries; -+ cmd->enableNotify = enableNotify; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_RETRY_LIMITS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+void -+wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid) -+{ -+ if (bssid != NULL) { -+ A_MEMCPY(bssid, wmip->wmi_bssid, ATH_MAC_LEN); -+ } -+} -+ -+A_STATUS -+wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode) -+{ -+ void *osbuf; -+ WMI_SET_OPT_MODE_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_OPT_MODE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->optMode = optMode; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_OPT_MODE_CMDID, -+ SYNC_BOTH_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_opt_tx_frame_cmd(struct wmi_t *wmip, -+ A_UINT8 frmType, -+ A_UINT8 *dstMacAddr, -+ A_UINT8 *bssid, -+ A_UINT16 optIEDataLen, -+ A_UINT8 *optIEData) -+{ -+ void *osbuf; -+ WMI_OPT_TX_FRAME_CMD *cmd; -+ osbuf = A_NETBUF_ALLOC(optIEDataLen + sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, (optIEDataLen + sizeof(*cmd))); -+ -+ cmd = (WMI_OPT_TX_FRAME_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, (optIEDataLen + sizeof(*cmd)-1)); -+ -+ cmd->frmType = frmType; -+ cmd->optIEDataLen = optIEDataLen; -+ //cmd->optIEData = (A_UINT8 *)((int)cmd + sizeof(*cmd)); -+ A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid)); -+ A_MEMCPY(cmd->dstAddr, dstMacAddr, sizeof(cmd->dstAddr)); -+ A_MEMCPY(&cmd->optIEData[0], optIEData, optIEDataLen); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_OPT_TX_FRAME_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl) -+{ -+ void *osbuf; -+ WMI_BEACON_INT_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_BEACON_INT_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->beaconInterval = intvl; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BEACON_INT_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+ -+A_STATUS -+wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize) -+{ -+ void *osbuf; -+ WMI_SET_VOICE_PKT_SIZE_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_VOICE_PKT_SIZE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->voicePktSize = voicePktSize; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_VOICE_PKT_SIZE_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+ -+A_STATUS -+wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSPLen) -+{ -+ void *osbuf; -+ WMI_SET_MAX_SP_LEN_CMD *cmd; -+ -+ /* maxSPLen is a two-bit value. If user trys to set anything -+ * other than this, then its invalid -+ */ -+ if(maxSPLen & ~0x03) -+ return A_EINVAL; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_MAX_SP_LEN_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->maxSPLen = maxSPLen; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_MAX_SP_LEN_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_UINT8 -+convert_userPriority_to_trafficClass(A_UINT8 userPriority) -+{ -+ return (up_to_ac[userPriority & 0x7]); -+} -+ -+A_UINT8 -+wmi_get_power_mode_cmd(struct wmi_t *wmip) -+{ -+ return wmip->wmi_powerMode; -+} -+ -+A_STATUS -+wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance) -+{ -+ return A_OK; -+} -+ -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+static A_STATUS -+wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) -+{ -+ -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ A_WMI_TCMD_RX_REPORT_EVENT(wmip->wmi_devt, datap, len); -+ -+ return A_OK; -+} -+ -+#endif /* CONFIG_HOST_TCMD_SUPPORT*/ -+ -+A_STATUS -+wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode) -+{ -+ void *osbuf; -+ WMI_SET_AUTH_MODE_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_AUTH_MODE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->mode = mode; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_AUTH_MODE_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode) -+{ -+ void *osbuf; -+ WMI_SET_REASSOC_MODE_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_REASSOC_MODE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->mode = mode; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_REASSOC_MODE_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status) -+{ -+ void *osbuf; -+ WMI_SET_LPREAMBLE_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_LPREAMBLE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->status = status; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_LPREAMBLE_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold) -+{ -+ void *osbuf; -+ WMI_SET_RTS_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_RTS_CMD*)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->threshold = threshold; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_RTS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status) -+{ -+ void *osbuf; -+ WMI_SET_WMM_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_WMM_CMD*)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->status = status; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_CMDID, -+ NO_SYNC_WMIFLAG)); -+ -+} -+ -+A_STATUS -+wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG cfg) -+{ -+ void *osbuf; -+ WMI_SET_WMM_TXOP_CMD *cmd; -+ -+ if( !((cfg == WMI_TXOP_DISABLED) || (cfg == WMI_TXOP_ENABLED)) ) -+ return A_EINVAL; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_WMM_TXOP_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->txopEnable = cfg; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_TXOP_CMDID, -+ NO_SYNC_WMIFLAG)); -+ -+} -+ -+#ifdef CONFIG_HOST_TCMD_SUPPORT -+/* WMI layer doesn't need to know the data type of the test cmd. -+ This would be beneficial for customers like Qualcomm, who might -+ have different test command requirements from differnt manufacturers -+ */ -+A_STATUS -+wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32 len) -+{ -+ void *osbuf; -+ char *data; -+ -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); -+ -+ osbuf= A_NETBUF_ALLOC(len); -+ if(osbuf == NULL) -+ { -+ return A_NO_MEMORY; -+ } -+ A_NETBUF_PUT(osbuf, len); -+ data = A_NETBUF_DATA(osbuf); -+ A_MEMCPY(data, buf, len); -+ -+ return(wmi_cmd_send(wmip, osbuf, WMI_TEST_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+#endif -+ -+A_STATUS -+wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status) -+{ -+ void *osbuf; -+ WMI_SET_BT_STATUS_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_BT_STATUS_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->streamType = streamType; -+ cmd->status = status; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_STATUS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd) -+{ -+ void *osbuf; -+ WMI_SET_BT_PARAMS_CMD* alloc_cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ alloc_cmd = (WMI_SET_BT_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(alloc_cmd, sizeof(*cmd)); -+ A_MEMCPY(alloc_cmd, cmd, sizeof(*cmd)); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_PARAMS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_get_keepalive_configured(struct wmi_t *wmip) -+{ -+ void *osbuf; -+ WMI_GET_KEEPALIVE_CMD *cmd; -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ cmd = (WMI_GET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_KEEPALIVE_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_UINT8 -+wmi_get_keepalive_cmd(struct wmi_t *wmip) -+{ -+ return wmip->wmi_keepaliveInterval; -+} -+ -+A_STATUS -+wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval) -+{ -+ void *osbuf; -+ WMI_SET_KEEPALIVE_CMD *cmd; -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*cmd)); -+ -+ cmd = (WMI_SET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd->keepaliveInterval = keepaliveInterval; -+ wmip->wmi_keepaliveInterval = keepaliveInterval; -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_KEEPALIVE_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType, A_UINT8 ieLen, -+ A_UINT8 *ieInfo) -+{ -+ void *osbuf; -+ WMI_SET_APPIE_CMD *cmd; -+ A_UINT16 cmdLen; -+ -+ if (ieLen > WMI_MAX_IE_LEN) { -+ return A_ERROR; -+ } -+ cmdLen = sizeof(*cmd) + ieLen - 1; -+ osbuf = A_NETBUF_ALLOC(cmdLen); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, cmdLen); -+ -+ cmd = (WMI_SET_APPIE_CMD *)(A_NETBUF_DATA(osbuf)); -+ A_MEMZERO(cmd, cmdLen); -+ -+ cmd->mgmtFrmType = mgmtFrmType; -+ cmd->ieLen = ieLen; -+ A_MEMCPY(cmd->ieInfo, ieInfo, ieLen); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_APPIE_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_STATUS -+wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen) -+{ -+ void *osbuf; -+ A_UINT8 *data; -+ -+ osbuf = A_NETBUF_ALLOC(dataLen); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, dataLen); -+ -+ data = A_NETBUF_DATA(osbuf); -+ -+ A_MEMCPY(data, cmd, dataLen); -+ -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WHALPARAM_CMDID, NO_SYNC_WMIFLAG)); -+} -+ -+A_INT32 -+wmi_get_rate(A_INT8 rateindex) -+{ -+ if (rateindex == RATE_AUTO) { -+ return 0; -+ } else { -+ return(wmi_rateTable[(A_UINT32) rateindex]); -+ } -+} -+ -+void -+wmi_node_return (struct wmi_t *wmip, bss_t *bss) -+{ -+ if (NULL != bss) -+ { -+ wlan_node_return (&wmip->wmi_scan_table, bss); -+ } -+} -+ -+bss_t * -+wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid, -+ A_UINT32 ssidLength, A_BOOL bIsWPA2) -+{ -+ bss_t *node = NULL; -+ node = wlan_find_Ssidnode (&wmip->wmi_scan_table, pSsid, -+ ssidLength, bIsWPA2); -+ return node; -+} -+ -+void -+wmi_free_allnodes(struct wmi_t *wmip) -+{ -+ wlan_free_allnodes(&wmip->wmi_scan_table); -+} -+ -+bss_t * -+wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr) -+{ -+ bss_t *ni=NULL; -+ ni=wlan_find_node(&wmip->wmi_scan_table,macaddr); -+ return ni; -+} -+ -+A_STATUS -+wmi_dset_open_reply(struct wmi_t *wmip, -+ A_UINT32 status, -+ A_UINT32 access_cookie, -+ A_UINT32 dset_size, -+ A_UINT32 dset_version, -+ A_UINT32 targ_handle, -+ A_UINT32 targ_reply_fn, -+ A_UINT32 targ_reply_arg) -+{ -+ void *osbuf; -+ WMIX_DSETOPEN_REPLY_CMD *open_reply; -+ -+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter - wmip=0x%x\n", DBGARG, (int)wmip)); -+ -+ osbuf = A_NETBUF_ALLOC(sizeof(*open_reply)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ A_NETBUF_PUT(osbuf, sizeof(*open_reply)); -+ open_reply = (WMIX_DSETOPEN_REPLY_CMD *)(A_NETBUF_DATA(osbuf)); -+ -+ open_reply->status = status; -+ open_reply->targ_dset_handle = targ_handle; -+ open_reply->targ_reply_fn = targ_reply_fn; -+ open_reply->targ_reply_arg = targ_reply_arg; -+ open_reply->access_cookie = access_cookie; -+ open_reply->size = dset_size; -+ open_reply->version = dset_version; -+ -+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETOPEN_REPLY_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -+static A_STATUS -+wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len) -+{ -+ WMI_PMKID_LIST_REPLY *reply; -+ A_UINT32 expected_len; -+ -+ if (len < sizeof(WMI_PMKID_LIST_REPLY)) { -+ return A_EINVAL; -+ } -+ reply = (WMI_PMKID_LIST_REPLY *)datap; -+ expected_len = sizeof(reply->numPMKID) + reply->numPMKID * WMI_PMKID_LEN; -+ -+ if (len < expected_len) { -+ return A_EINVAL; -+ } -+ -+ A_WMI_PMKID_LIST_EVENT(wmip->wmi_devt, reply->numPMKID, -+ reply->pmkidList); -+ -+ return A_OK; -+} -+ -+#ifdef CONFIG_HOST_DSET_SUPPORT -+A_STATUS -+wmi_dset_data_reply(struct wmi_t *wmip, -+ A_UINT32 status, -+ A_UINT8 *user_buf, -+ A_UINT32 length, -+ A_UINT32 targ_buf, -+ A_UINT32 targ_reply_fn, -+ A_UINT32 targ_reply_arg) -+{ -+ void *osbuf; -+ WMIX_DSETDATA_REPLY_CMD *data_reply; -+ int size; -+ -+ size = sizeof(*data_reply) + length; -+ -+ A_DPRINTF(DBG_WMI, -+ (DBGFMT "Enter - length=%d status=%d\n", DBGARG, length, status)); -+ -+ osbuf = A_NETBUF_ALLOC(size); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ A_NETBUF_PUT(osbuf, size); -+ data_reply = (WMIX_DSETDATA_REPLY_CMD *)(A_NETBUF_DATA(osbuf)); -+ -+ data_reply->status = status; -+ data_reply->targ_buf = targ_buf; -+ data_reply->targ_reply_fn = targ_reply_fn; -+ data_reply->targ_reply_arg = targ_reply_arg; -+ data_reply->length = length; -+ -+ if (status == A_OK) { -+ if (a_copy_from_user(data_reply->buf, user_buf, length)) { -+ return A_ERROR; -+ } -+ } -+ -+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETDATA_REPLY_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+#endif /* CONFIG_HOST_DSET_SUPPORT */ -+ -+A_STATUS -+wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status) -+{ -+ void *osbuf; -+ char *cmd; -+ -+ wps_enable = status; -+ -+ osbuf = a_netbuf_alloc(sizeof(1)); -+ if (osbuf == NULL) { -+ return A_NO_MEMORY; -+ } -+ -+ a_netbuf_put(osbuf, sizeof(1)); -+ -+ cmd = (char *)(a_netbuf_to_data(osbuf)); -+ -+ A_MEMZERO(cmd, sizeof(*cmd)); -+ cmd[0] = (status?1:0); -+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WSC_STATUS_CMDID, -+ NO_SYNC_WMIFLAG)); -+} -+ -Index: linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wmi/wmi_doc.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.24.7/drivers/sdio/function/wlan/ar6000/wmi/wmi_doc.h 2008-12-11 22:46:49.000000000 +0100 -@@ -0,0 +1,4421 @@ -+/* -+ * -+ * Copyright (c) 2004-2007 Atheros Communications Inc. -+ * All rights reserved. -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation; -+ * -+ * Software distributed under the License is distributed on an "AS -+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+ * implied. See the License for the specific language governing -+ * rights and limitations under the License. -+ * -+ * -+ * -+ */ -+ -+ -+#if 0 -+Wireless Module Interface (WMI) Documentaion -+ -+ This section describes the format and the usage model for WMI control and -+ data messages between the host and the AR6000-based targets. The header -+ file include/wmi.h contains all command and event manifest constants as -+ well as structure typedefs for each set of command and reply parameters. -+ -+Data Frames -+ -+ The data payload transmitted and received by the target follows RFC-1042 -+ encapsulation and thus starts with an 802.2-style LLC-SNAP header. The -+ WLAN module completes 802.11 encapsulation of the payload, including the -+ MAC header, FCS, and WLAN security related fields. At the interface to the -+ message transport (HTC), a data frame is encapsulated in a WMI message. -+ -+WMI Message Structure -+ -+ The WMI protocol leverages an 802.3-style Ethernet header in communicating -+ the source and destination information between the host and the AR6000 -+ modules using a 14-byte 802.3 header ahead of the 802.2-style payload. In -+ addition, the WMI protocol adds a header to all data messages: -+ -+ { -+ INT8 rssi -+ The RSSI of the received packet and its units are shown in db above the -+ noise floor, and the noise floor is shown in dbm. -+ UINT8 info -+ Contains information on message type and user priority. Message type -+ differentiates between a data packet and a synchronization message. -+ } WMI_DATA_HDR -+ -+ User priority contains the 802.1d user priority info from host to target. Host -+ software translates the host Ethernet format to 802.3 format prior to Tx and -+ 802.3 format to host format in the Rx direction. The host does not transmit the -+ FCS that follows the data. MsgType differentiates between a regular data -+ packet (msgType=0) and a synchronization message (msgType=1). -+ -+Data Endpoints -+ -+ The AR6000 chipset provides several data endpoints to support quality of -+ service (QoS) and maintains separate queues and separate DMA engines for -+ each data endpoint. A data endpoint can be bi-directional. -+ -+ Best effort (BE) class traffic uses the default data endpoint (2). The host can -+ establish up to two additional data endpoints for other traffic classes. Once -+ such a data endpoint is established, it sends and receives corresponding QoS -+ traffic in a manner similar to the default data endpoint. -+ -+ If QoS is desired over the interconnect, host software must classify each data -+ packet and place it on the appropriate data endpoint. The information -+ required to classify data is generally available in-band as an 802.1p/q style -+ tag or as the ToS field in the IP header. The information may also be available -+ out-of-band depending on the host DDI. -+ -+Connection States -+ -+ Table B-1 describes the AR6000 WLAN connection states: -+ -+ Table B-1. AR6000 Connection States -+ -+Connection State -+ Description -+ -+ DISCONNECTED -+ In this state, the AR6000 device is not connected to a wireless -+ network. The device is in this state after reset when it sends the -+ WIRELESS MODULE “READY” EVENT, after it processes a -+ DISCONNECT command, and when it loses its link with the -+ access point (AP) that it was connected to. The device signals a -+ transition to the DISCONNECTED state with a “DISCONNECT” -+ event. -+ -+CONNECTED -+ In this state, the AR6000 device is connected to wireless networks. -+ The device enters this state after successfully processing a -+ CONNECT, which establishes a connection with a wireless -+ network. The device signals a transition to the CONNECTED state -+ with a “CONNECT” event. -+ -+ -+Message Types -+ -+ WMI uses commands, replies, and events for the control and configuration of -+ the AR6000 device. The control protocol is asynchronous. Table B-2 describes -+ AR6000 message types: -+ -+Table B-2. AR6000 Message Types -+ -+Message Type -+ Description -+ -+Commands -+ Control messages that flow from the host to the device -+ -+Replies/Events -+ Control messages that flow from the device to the host. -+ -+ The device issues a reply to some WMI commands, but not to others. -+ The payload in a reply is command-specific, and some commands do -+ not trigger a reply message at all. Events are control messages issued -+ by the device to signal the occurrence of an asynchronous event. -+ -+ -+WMI Message Format -+ -+ All WMI control commands, replies and events use the header format: -+ -+ WMI_CMD_HDR Header Format -+ { -+ UINT16 id -+ This 16-bit constant identifies which WMI command the host is issuing, -+ which command the target is replying to, or which event has occurred. -+ WMI_CMD_HDR -+ } -+ -+ -+ A variable-size command-, reply-, or event-specific payload follows the -+ header. Over the interconnect, all fields in control messages (including -+ WMI_CMD_HDR and the command specific payload) use 32-bit little Endian -+ byte ordering and fields are packed. The AR6000 device always executes -+ commands in order, and the host may send multiple commands without -+ waiting for previous commands to complete. A majority of commands are -+ processed to completion once received. Other commands trigger a longer -+ duration activity whose completion is signaled to the host through an event. -+ -+Command Restrictions -+ -+ Some commands may only be issued when the AR6000 device is in a certain -+ state. The host is required to wait for an event signaling a state transition -+ before such a command can be issued. For example, if a command requires -+ the device to be in the CONNECTED state, then the host is required to wait -+ for a “CONNECT” event before it issues that command. -+ -+ The device ignores any commands inappropriate for its current state. If the -+ command triggers a reply, the device generates an error reply. Otherwise, the -+ device silently ignores the inappropriate command. -+ -+Command and Data Synchronization -+ -+ WMI provides a mechanism for a host to advise the device of necessary -+ synchronization between commands and data. The device implements -+ synchronization; no implicit synchronization exists between endpoints. -+ -+ The host controls synchronization using the “SYNCHRONIZE” command -+ over the control channel and synchronization messages over data channels. -+ The device stops each data channel upon receiving a synchronization message -+ on that channel, processing all data packets received prior to that message. -+ After the device receives synchronization messages for each data endpoint -+ and the “SYNCHRONIZE” command, it resumes all channels. -+ -+ When the host must guarantee a command executes before processing new -+ data packets, it first issues the command, then issues the “SYNCHRONIZE” -+ command and sends synchronization messages on data channels. When the -+ host must guarantee the device has processed all old data packets before a -+ processing a new command, it issues a “SYNCHRONIZE” command and -+ synchronization messages on all data channels, then issues the desired -+ command. -+ -+ -+ -+WMI Commands -+ -+ ADD_BAD_AP -+ Cause the AR6000 device to avoid a particular AP -+ ADD_CIPHER_KEY -+ Add or replace any of the four AR6000 encryption keys -+ ADD_WOW_PATTERN -+ Used to add a pattern to the WoW pattern list -+ CLR_RSSI_SNR -+ Clear the current calculated RSSI and SNR value -+ CONNECT_CMD -+ Request that the AR6000 device establish a wireless connection -+ with the specified SSID -+ CREATE_PSTREAM -+ Create prioritized data endpoint between the host and device -+ DELETE_BAD_AP -+ Clear an entry in the bad AP table -+ DELETE_CIPHER_KEY -+ Delete a previously added cipher key -+ DELETE_PSTREAM -+ Delete a prioritized data endpoint -+ DELETE_WOW_PATTERN -+ Remove a pre-specified pattern from the WoW pattern list -+ EXTENSION -+ WMI message interface command -+ GET_BIT_RATE -+ Retrieve rate most recently used by the AR6000 -+ GET_CHANNEL_LIST -+ Retrieve list of channels used by the AR6000 -+ GET_FIXRATES -+ Retrieves the rate-mask set via the SET_FIXRATES command. -+ GET_PMKID_LIST_CMD -+ Retrieve the firmware list of PMKIDs -+ GET_ROAM_DATA -+ Internal use for data collection; available in special build only -+ GET_ROAM_TBL -+ Retrieve the roaming table maintained on the target -+ GET_TARGET_STATS -+ Request that the target send the statistics it maintains -+ GET_TX_PWR -+ Retrieve the current AR6000 device Tx power levels -+ GET_WOW_LIST -+ Retrieve the current list of WoW patterns -+ LQ_THRESHOLD_PARAMS -+ Set the link quality thresholds -+ OPT_TX_FRAME -+ Send a special frame (special feature) -+ RECONNECT -+ Request a reconnection to a BSS -+ RSSI_THRESHOLD_PARAMS -+ Configure how the AR6000 device monitors and reports signal -+ strength (RSSI) of the connected BSS -+ SCAN_PARAMS -+ Determine dwell time and changes scanned channels -+ SET_ACCESS_PARAMS -+ Set access parameters for the wireless network -+ SET_ADHOC_BSSID -+ Set the BSSID for an ad hoc network -+ SET_AKMP_PARAMS -+ Set multiPMKID mode -+ SET_APPIE -+ Add application-specified IE to a management frame -+ SET_ASSOC_INFO -+ Specify the IEs the device should add to association or -+ reassociation requests -+ SET_AUTH_MODE -+ Set 802.11 authentication mode of reconnection -+ SET_BEACON_INT -+ Set the beacon interval for an ad hoc network -+ SET_BIT_RATE -+ Set the AR6000 to a specific fixed bit rate -+ SET_BMISS_TIME -+ Set the beacon miss time -+ SET_BSS_FILTER -+ Inform the AR6000 of network types about which it wants to -+ receive information using a “BSSINFO” event -+ SET_BT_PARAMS -+ Set the status of a Bluetooth stream (SCO or A2DP) or set -+ Bluetooth coexistence register parameters -+ SET_BT_STATUS -+ Set the status of a Bluetooth stream (SCO or A2DP) -+ SET_CHANNEL_PARAMETERS -+ Configure WLAN channel parameters -+ SET_DISC_TIMEOUT -+ Set the amount of time the AR6000 spends attempting to -+ reestablish a connection -+ SET_FIXRATES -+ Set the device to a specific fixed PHY rate (supported subset) -+ SET_HALPARAM -+ Internal AR6000 command to set certain hardware parameters -+ SET_HOST_SLEEP_MODE -+ Set the host mode to asleep or awake -+ SET_IBSS_PM_CAPS -+ Support a non-standard power management scheme for an -+ ad hoc network -+ SET_LISTEN_INT -+ Request a listen interval -+ SET_LPREAMBLE -+ Override the short preamble capability of the AR6000 device -+ SET_MAX_SP_LEN -+ Set the maximum service period -+ SET_OPT_MODE -+ Set the special mode on/off (special feature) -+ SET_PMKID -+ Set the pairwise master key ID (PMKID) -+ SET_PMKID_LIST_CMD -+ Configure the firmware list of PMKIDs -+ SET_POWER_MODE -+ Set guidelines on trade-off between power utilization -+ SET_POWER_PARAMS -+ Configure power parameters -+ SET_POWERSAVE_PARAMS -+ Set the two AR6000 power save timers -+ SET_PROBED_SSID -+ Provide list of SSIDs the device should seek -+ SET_REASSOC_MODE -+ Specify whether the disassociated frame should be sent upon -+ reassociation -+ SET_RETRY_LIMITS -+ Limit how many times the device tries to send a frame -+ SET_ROAM_CTRL -+ Control roaming behavior -+ SET_RTS -+ Determine when RTS should be sent -+ SET_SCAN_PARAMS -+ Set the AR6000 scan parameters -+ SET_TKIP_COUNTERMEASURES -+ Enable/disable reports of TKIP MIC errors -+ SET_TX_PWR -+ Specify the AR6000 device Tx power levels -+ SET_VOICE_PKT_SIZE -+ Set voice packet size -+ SET_WMM -+ Override the AR6000 WMM capability -+ SET_WMM_TXOP -+ Configure TxOP bursting when sending traffic to a WMM- -+ capable AP -+ SET_WOW_MODE -+ Enable/disable WoW mode -+ SET_WSC_STATUS -+ Enable/disable profile check in cserv when the WPS protocol -+ is in progress -+ SNR_THRESHOLD_PARAMS -+ Configure how the device monitors and reports SNR of BSS -+ START_SCAN -+ Start a long or short channel scan -+ SYNCHRONIZE -+ Force a synchronization point between command and data -+ paths -+ TARGET_REPORT_ERROR_BITMASK -+ Control “ERROR_REPORT” events from the AR6000 -+ -+ -+ -+ -+Name -+ ADD_BAD_AP -+ -+Synopsis -+ The host uses this command to cause the AR6000 to avoid a particular AP. The -+ AR6000 maintain a table with up to two APs to avoid. An ADD_BAD_AP command -+ adds or replaces the specified entry in this bad AP table. -+ -+ If the AR6000 are currently connected to the AP specified in this command, they -+ disassociate. -+ -+Command -+ wmiconfig eth1 --badap -+ -+Command Parameters -+ UINT8 badApIndex Index [0...1] that identifies which entry in the -+ bad AP table to use -+ -+ -+ UINT8 bssid[6] MAC address of the AP to avoid -+ -+Command Values -+ badApIndex = 0, 1 Entry in the bad AP table to use -+ -+Reset Value -+ The bad AP table is cleared -+ -+Restrictions -+ None -+ -+See Also -+ “DELETE_BAD_AP” on page B-13 -+ -+===================================================================== -+Name -+ ADD_CIPHER_KEY -+ -+Synopsis -+ The host uses this command to add/replace any of four encryption keys on the -+ AR6000. The ADD_CIPHER_KEY command is issued after the CONNECT event -+ has been received by the host for all dot11Auth modes except for SHARED_AUTH. -+ When the dot11AuthMode is SHARED_AUTH, then the ADD_CIPHER_KEY -+ command should be issued before the “CONNECT” command. -+ -+Command -+ wmiconfig eth1 --cipherkey -+ -+ -+Command Parameters -+ UINT8 keyIndex Index (0...3) of the key to add/replace; -+ uniquely identifies the key -+ UINT8 keyType CRYPTO_TYPE -+ UINT8 keyUsage Specifies usage parameters of the key when -+ keyType = WEP_CRYPT -+ UINT8 keyLength Length of the key in bytes -+ UINT8 keyOpCtrl bit[0] = Initialize TSC (default), -+ bit[1] = Initialize RSC -+ UINT8 keyRSC[8] Key replay sequence counter (RSC) initial -+ value the device should use -+ UINT8 key[32] Key material used for this connection -+ Command Values -+ { -+ NONE_CRYPT = 1 -+ WEP_CRYPT = 2 -+ TKIP_CRYPT = 3 -+ AES_CRYPT = 4 -+ KEY_OP_INIT_TSC 0x01 -+ KEY_OP_INIT_RSC 0x02 -+ KEY_OP_INIT_VAL 0x03 -+ Default is to Initialize the TSC -+ KEY_OP_VALID_MASK 0x04 -+ Two operations defined -+ } CRYPTO_TYPE -+ -+ { -+ PAIRWISE_USAGE = 0 Set if the key is used for unicast traffic only -+ GROUP_USAGE = 1 Set if the key is used to receive multicast -+ traffic (also set for static WEP keys) -+ TX_USAGE = 2 Set for the GROUP key used to transmit frames -+ All others are reserved -+ } KEY_USAGE -+ -+Reset Value -+ The four available keys are disabled. -+ -+Restrictions -+ The cipher should correspond to the encryption mode specified in the “CONNECT” -+ command. -+ -+See Also -+ “DELETE_CIPHER_KEY” -+ -+===================================================================== -+ -+ -+Name -+ ADD_WOW_PATTERN -+ -+Synopsis -+ The host uses this command to add a pattern to the WoW pattern list; used for -+ pattern-matching for host wakeups by the WoW module. If the host mode is asleep -+ and WoW is enabled, all packets are matched against the existing WoW patterns. If a -+ packet matches any of the patterns specified, the target will wake up the host. All -+ non-matching packets are discarded by the target without being sent up to the host. -+ -+Command -+ wmiconfig –addwowpattern -+ -+ -+Command Parameters -+ A_UINT8 filter_list_id ID of the list that is to include the new pattern -+ A_UINT8 filter_size Size of the new pattern -+ A_UINT8 filter_offset Offset at which the pattern matching for this -+ new pattern should begin at -+ A_UINT8 filter[1] Byte stream that contains both the pattern and -+ the mask of the new WoW wake-up pattern -+ -+Reply Parameters -+ None -+ -+Reset Value -+ None defined (default host mode is awake) -+ -+Restrictions -+ None -+ -+See Also -+ “DELETE_WOW_PATTERN” -+ -+===================================================================== -+ -+ -+Name -+ CLR_RSSI_SNR -+ -+Synopsis -+ Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by -+ running-average value. This command will clear the history and have a fresh start -+ for the running-average mechanism. -+ -+Command -+ wmiconfig eth1 --cleanRssiSnr -+ -+Command Parameters -+ None -+ -+Reply Parameters -+ None -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+Name -+ CONNECT_CMD -+ -+Synopsis -+ New connect control information (connectCtrl) is added, with 32 possible modifiers. -+ -+ CONNECT_SEND_REASSOC -+ Valid only for a host-controlled connection to a -+ particular AP. If this bit is set, a reassociation frame is -+ sent. If this bit is clear, an association request frame is -+ sent to the AP. -+ -+ CONNECT_IGNORE_WPAx_GROUP_CIPHER -+ No group key is issued in the CONNECT command, -+ so use the group key advertised by the AP. In a target- -+ initiated roaming situation this allows a STA to roam -+ between APs that support different multicast ciphers. -+ -+ CONNECT_PROFILE_MATCH_DONE -+ In a host-controlled connection case, it is possible that -+ during connect, firmware may not have the -+ information for a profile match (e.g, when the AP -+ supports hidden SSIDs and the device may not -+ transmit probe requests during connect). By setting -+ this bit in the connection control information, the -+ firmware waits for a beacon from the AP with the -+ BSSID supplied in the CONNECT command. No -+ additional profile checks are done. -+ -+ CONNECT_IGNORE_AAC_BEACON -+ Ignore the Admission Capacity information in the -+ beacon of the AP -+ -+ CONNECT_ASSOC_POLICY_USER -+ When set, the CONNECT_SEND_REASSOC setting -+ determines if an Assoc or Reassoc is sent to an AP -+ -+Command -+ wmiconfig --setconnectctrl -+ -+Command Parameters -+ typedef struct{ -+ A_UINT8 networktype; -+ A_UINT8 dot11authmode; -+ A_UINT8 authmode; -+ A_UINT8 pairwiseCryptoType; /*CRYPTO_TYPE*/ -+ A_UINT8 pairwiseCryptoLen; -+ A_UINT8 groupCryptoType; /*CRYPTO_TYPE*/ -+ A_UINT8 groupCryptoLen; -+ A_UINT8 ssidLength; -+ A_UCHAR ssid[WMI_MAX_SSID_LEN]; -+ A_UINT16 channel; -+ A_UINT8 bssid[AUTH_MAC_LEN]; -+ A_UINT8 ctrl_flags; /*WMI_CONNECT_CTRL_FLAGS_BITS*/ -+ } WMI_CONNECT_CMD; -+ -+ ctrl flags bitmask -+ = 0x0001 CONNECT_ASSOC_POLICY_USER -+ Assoc frames are sent using the policy specified by -+ the flag -+ = 0x0002 CONNECT_SEND_REASSOC -+ Send Reassoc frame while connecting, otherwise send -+ assoc frames -+ = 0x0004 CONNECT_IGNORE_WPAx_GROUP_CIPHER -+ Ignore WPAx group cipher for WPA/WPA2 -+ = 0x0008 CONNECT_PROFILE_MATCH_DONE -+ Ignore any profile check -+ = 0x0010 CONNECT_IGNORE_AAC_BEACON -+ Ignore the admission control information in the -+ beacon -+ ... CONNECT_CMD, continued -+ Command Values -+ typedef enum { -+ INFRA_NETWORK = 0x01, -+ ADHOC_NETWORK = 0x02, -+ ADHOC_CREATOR = 0x04, -+ } NETWORK_TYPE; -+ -+ typedef enum { -+ OPEN_AUTH = 0x01, -+ SHARED_AUTH = 0x02, -+ LEAP_AUTH = 0x04, -+ } DOT11_AUTH_MODE; -+ typedef enum { -+ NONE_AUTH = 0x01, -+ WPA_AUTH = 0x02, -+ WPA_PSK_AUTH = 0x03, -+ WPA2_AUTH = 0x04, -+ WPA2_PSK_AUTH = 0x05, -+ WPA_AUTH_CCKM = 0x06, -+ WPA2_AUTH_CCKM = 0x07, -+ } AUTH_MODE; -+ typedef enum { -+ NONE_CRYPT = 0x01, -+ WEP_CRYPT = 0x02, -+ TKIP_CRYPT = 0x03, -+ AES_CRYPT = 0x04, -+ } CRYPTO_TYPE; -+ typedef enum { -+ CONNECT_ASSOC_POLICY_USER = 0x0001, -+ CONNECT_SEND_REASSOC = 0x0002, -+ CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004, -+ CONNECT_PROFILE_MATCH_DONE = 0x0008, -+ CONNECT_IGNORE_AAC_BEACON = 0x0010, -+ } WMI_CONNECT_CTRL_FLAGS_BITS; -+ -+ pairwiseCryptoLen and groupCryptoLen are valid when the respective -+ CryptoTypesis WEP_CRYPT, otherwise this value should be 0. This is the length in -+ bytes. -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+ -+Name -+ CREATE_PSTREAM -+ -+Synopsis -+ The host uses this command to create a new prioritized data endpoint between the -+ host and the AR6000 device that carries a prioritized stream of data. If the AP that the -+ device connects to requires TSPEC stream establishment, the device requests the -+ corresponding TSPEC with the AP. The maximum and minimum service interval -+ ranges from 0 – 0x7FFFFFFF (ms), where 0 = disabled. The device does not send a -+ reply event for this command, as it is always assumed the command has succeeded. -+ An AP admission control response comes to the host via a WMI_CAC_INDICATION -+ event, once the response for the ADDTS frame comes. -+ -+ Examples of cases where reassociation is generated (when WMM) and cases where -+ ADDTS is generated (when WMM and enabling ACM) are when: -+ Changing UAPSD flags in WMM mode, reassociation is generated -+ Changing the interval of sending auto QoS Null frame in WMM mode; -+ reassociation is not generated -+ Issuing a command with same previous parameters in WMM mode and enabling -+ ACM, an ADDTS request is generated -+ Changing the interval of a QoS null frame sending in WMM mode and enabling -+ ACM, an ADDTS request is generated -+ Issuing the command in disconnected state, reassociation or ADDTS is not -+ generated but the parameters are available after (re)association -+ -+Command -+ --createqos -+ -+ where: -+ -+ -+ 802.1D user priority range (0–7) -+ -+ = 0 Tx (uplink) traffic -+ = 1 Rx (downlink) traffic -+ = 2 Bi-directional traffic -+ -+ = 1 BK -+ = 2 VI -+ = 3 VO -+ -+ = 0 Aperiodic -+ = 1 Periodic -+ -+ Specifies whether the voice power save mechanism -+ (APSD if AP supports it or legacy/simulated APSD -+ [using PS-Poll]) should be used -+ = 0 Disable voice power save for traffic class -+ = 1 Enable APSD voice power save for traffic class -+ = 2 Enable voice power save for all traffic classes -+ -+ (In ms) -+ -+ Inactivity interval (in ms) (0 = Infinite) -+ -+ (In ms) -+ -+ Service start time -+ -+ TSID range (0–15) -+ -+ Nominal MAC SDU size -+ -+ Maximum MAC SDU size -+ -+ Minimum data rate (in bps) -+ -+ Mean data rate (in bps) -+ -+ Peak data rate (in bps) -+ -+ Maximum burst size (in bps) -+ -+ Delay bound -+ -+ Minimum PHY rate (in bps) -+ -+ Surplus bandwidth allowance -+ -+ Medium time in TU of 32-ms periods per sec -+ ... CREATE_PSTREAM (continued) -+ -+Command Parameters -+ UINT8 trafficClass TRAFFIC_CLASS value -+ UINT8 traffic -+ Direction -+ DIR_TYPE value -+ UINT8 rxQueueNum -+ AR6000 device mailbox index (2 or 3) -+ corresponding to the endpoint the host -+ wishes to use to receive packets for the -+ prioritized stream -+ UINT8 trafficType TRAFFIC_TYPE value -+ UINT8 voicePS -+Capability -+ VOICEPS_CAP_TYPE value -+ UINT8 tsid Traffic stream ID -+ UINT8 userPriority 802.1D user priority -+ UINT16 nominalMSDU Nominal MSDU in octets -+ UINT16 maxMSDU Maximum MSDU in octets -+ UINT32 minServiceInt Minimum service interval: the min. -+ period of traffic specified (in ms) -+ UINT32 maxServiceInt Maximum service interval: the max. -+ period of traffic specified (in ms) -+ UINT32 inactivityInt Indicates how many ms an established -+ stream is inactive before the prioritized -+ data endpoint is taken down and the -+ corresponding T-SPEC deleted -+ UINT32 suspensionInt Suspension interval (in ms) -+ UINT32 service StartTime Service start time -+ UINT32 minDataRate Minimum data rate (in bps) -+ UINT32 meanDataRate Mean data rate (in bps) -+ UINT32 peakDataRate Peak data rate (in bps) -+ UINT32 maxBurstSize -+ UINT32 delayBound -+ UINT32 minPhyRate Minimum PHY rate for TSPEC (in bps) -+ UINT32 sba Surplus bandwidth allowance -+ UINT32 mediumTime Medium TSPEC time (in units of 32 ms) -+Command Values -+ { -+ WMM_AC_BE = 0 Best Effort -+ WMM_AC_BK = 1 Background -+ WMM_AC_VI = 2 Video -+ WMM_AC_VO = 3 Voice -+ All other values reserved -+ } TRAFFIC_CLASS -+ { -+ UPLINK_TRAFFIC = 0 From the AR6000 device to the AP -+ DOWNLINK_TRAFFIC = 1 From the AP to the AR6000 device -+ BIDIR_TRAFFIC = 2 Bi-directional traffic -+ All other values reserved -+ } DIR_TYPE -+ { -+ DISABLE_FOR_THIS_AC = 0 -+ ENABLE_FOR_THIS_AC = 1 -+ ENABLE_FOR_ALL_AC = 2 -+ All other values reserved -+ } VOICEPS_CAP_TYPE -+ -+ ... CREATE_PSTREAM (continued) -+ -+ -+ VI BE BK Supported, Y/N? -+ 0 0 0 0 Y -+ 0 0 0 1 Y -+ 0 0 1 0 N -+ 0 0 1 1 N -+ 0 1 0 0 Y -+ 0 1 0 1 Y -+ 0 1 1 0 N -+ 0 1 1 1 N -+ 1 0 0 0 Y -+ 1 0 0 1 Y -+ 1 0 1 0 N -+ 1 1 0 0 N -+ 1 1 0 1 Y -+ 1 1 0 0 N -+ 1 1 1 0 N -+ 1 1 1 1 Y -+ -+Reset Value -+ No pstream is present after reset; each of the BE, BK, VI,VO pstreams must be created -+ (either implicitly by data flow or explicitly by user) -+ -+Restrictions -+ This command can only be issued when the device is in the CONNECTED state. If -+ the device receives the command while in DISCONNECTED state, it replies with a -+ failure indication. At most four prioritized data endpoints can be created, one for -+ each AC. -+ -+See Also -+ “DELETE_PSTREAM” -+===================================================================== -+ -+Name -+ DELETE_BAD_AP -+ -+Synopsis -+ The host uses this command to clear a particular entry in the bad AP table -+ -+Command -+ wmiconfig eth1 --rmAP [--num=] // used to clear a badAP -+ entry. num is index from 0-3 -+ -+Command Parameters -+ UINT8 badApIndex Index [0...n] that identifies the entry in the bad -+ AP table to delete -+ -+Command Values -+ badApIndex = 0, 1, 2, 3 -+ Entry in the bad AP table -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+See Also -+ “ADD_BAD_AP” -+ -+===================================================================== -+ -+ -+Name -+ DELETE_CIPHER_KEY -+ -+Synopsis -+ The host uses this command to delete a key that was previously added with the -+ “ADD_CIPHER_KEY” command. -+ -+Command -+ TBD -+ -+Command Parameters -+ UINT8 keyIndex Index (0...3) of the key to be deleted -+ -+Command Values -+ keyIndex = 0, 1,2, 3 Key to delete -+ -+Reset Value -+ None -+ -+Restrictions -+ The host should not delete a key that is currently in use by the AR6000. -+ -+See Also -+ “ADD_CIPHER_KEY” -+ -+===================================================================== -+ -+Name -+ DELETE_PSTREAM -+ -+Synopsis -+ The host uses this command to delete a prioritized data endpoint created by a -+ previous “CREATE_PSTREAM” command -+ -+Command -+ --deleteqos , where: -+ -+ -+ = 0 BE -+ = 1 BK -+ = 2 VI -+ = 3 VO -+ -+ The TSpec ID; use the -qosqueue option -+ to get the active TSpec IDs for each traffic class -+ -+Command Parameters -+ A_UINT8 trafficClass Indicate the traffic class of the stream -+ being deleted -+ -+Command Values -+ { -+ WMM_AC_BE = 0 Best effort -+ WMM_AC_BK = 1 Background -+ WMM_AC_VI = 2 Video -+ WMM_AC_VO = 3 Voice -+ } TRAFFIC CLASS -+ -+ 0-15 for TSID -+ -+Reply Values -+ N/A -+ -+Restrictions -+ This command should only be issued after a “CREATE_PSTREAM” command has -+ successfully created a prioritized stream -+ -+See Also -+ “CREATE_PSTREAM” -+ -+===================================================================== -+ -+ -+Name -+ DELETE_WOW_PATTERN -+ -+Synopsis -+ The host uses this command to remove a pre-specified pattern from the -+ WoW pattern list. -+ -+Command -+ wmiconfig –delwowpattern -+ -+Command Parameters -+ A_UINT8 filter_list_id ID of the list that contains the WoW filter -+ pattern to delete -+ A_UINT8 filter_id ID of the WoW filter pattern to delete -+ -+Reply Parameters -+ None -+ -+ -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+See Also -+ “ADD_WOW_PATTERN” -+ -+===================================================================== -+ -+ -+Name -+ EXTENSION -+ -+Synopsis -+ The WMI message interface is used mostly for wireless control messages to a wireless -+ module applicable to wireless module management regardless of the target platform -+ implementation. However, some commands only peripherally related to wireless -+ management are desired during operation. These wireless extension commands may -+ be platform-specific or implementation-dependent. -+ -+Command -+ N/A -+ -+Command Parameters -+ Command-specific -+ -+Command Values -+ Command-specific -+ -+Reply Parameters -+ Command-specific -+ -+Reset Values -+ None defined -+ -+Restrictions -+ None defined -+ -+===================================================================== -+ -+ -+Name -+ GET_BIT_RATE -+ -+Synopsis -+ Used by the host to obtain the rate most recently used by the AR6000 device -+ -+Command -+ wmiconfig eth1 --getfixrates -+ -+Command Parameters -+ None -+ -+ -+ -+Reply Parameters -+ INT8 -+ rateIndex -+ See the “SET_BIT_RATE” command -+ -+Reset Values -+ None -+ -+Restrictions -+ This command should only be used during development/debug; it is not intended -+for use in production. It is only valid when the device is in the CONNECTED state -+ -+See Also -+ “SET_BIT_RATE” -+ -+===================================================================== -+ -+ -+Name -+ GET_CHANNEL_LIST -+ -+Synopsis -+ Used by the host uses to retrieve the list of channels that can be used by the device -+ while in the current wireless mode and in the current regulatory domain. -+ -+Command -+ TBD -+ -+Command Parameters -+ None -+ -+Reply Parameters -+ UINT8 reserved Reserved -+ UINT8 numberOfChannels Number of channels the reply contains -+ UINT16 channelList[numberOfChannels] Array of channel frequencies (in MHz) -+ -+Reset Values -+ None defined -+ -+Restrictions -+ The maximum number of channels that can be reported are 32 -+ -+===================================================================== -+ -+ -+Name -+ GET_FIXRATES -+ -+Synopsis -+ Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by -+ running-average value. This command will clear the history and have a fresh start for -+ the running-average mechanism. -+ -+Synopsis -+ This returns rate-mask set via WMI_SET_FIXRATES to retrieve the current fixed rate -+ that the AR6001 or AR6001 is using. See “SET_FIXRATES”. -+ -+Command -+ wmiconfig eth1 --getfixrates -+ -+Command Parameters -+ A_UINT16 fixRateMask; Note: if this command is used prior to -+ using WMI_SET_FIXRATES, AR6000 -+ returns 0xffff as fixRateMask, indicating -+ all the rates are enabled -+ -+Reply Parameters -+ None -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+See Also -+ “SET_FIXRATES” -+ -+===================================================================== -+ -+ -+ -+Name -+ GET_PMKID_LIST_CMD -+ -+Synopsis -+ Retrieves the list of PMKIDs on the firmware. The -+ WMI_GET_PMKID_LIST_EVENT is generated by the firmware. -+ -+Command -+ TBD -+ -+Command Parameters -+ -+Reset Values -+ None -+ -+Restrictions -+ None -+ -+See Also -+ SET_PMKID_LIST_CMD GET_PMKID_LIST_EVENT -+ -+===================================================================== -+ -+ -+Name -+ GET_ROAM_TBL -+ -+Synopsis -+ Retrieve the roaming table maintained on the target. The response is reported -+ asynchronously through the ROAM_TBL_EVENT. -+ -+Command -+ wmiconfig --getroamtable -+ -+Command Parameters -+ A_UINT8 roamCtrlType; -+ A_UINT16 roamMode -+ A_UINT16 numEntries -+ WMI_BSS_ROAM_INFO bssRoamInfo[1] -+ -+Reply Value -+ Reported asynchronously through the ROAM_TBL_EVENT -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+See Also -+ SET_KEEPALIVE -+ -+===================================================================== -+ -+ -+Name -+ GET_TARGET_STATS -+ -+Synopsis -+ The host uses this command to request that the target send the statistics that it -+ maintains. The statistics obtained from the target are accrued in the host every time -+ the GET_TARGET_STATS command is issued. The --clearStats option is added to -+ clear the target statistics maintained in the host. -+ -+Command -+ wmiconfig --getTargetStats --clearStats -+ -+Command Parameters -+ TARGET_STATS targetStats -+ WMI_TARGET_STATS -+ UINT8 clearStats -+ -+ -+Reply Value -+ RSSI return value (0–100) -+ -+Reset Values -+ All statistics are cleared (zeroed) -+ -+Restrictions -+ The --getTargetStats option must be used; the --clearStats option is also available also -+ -+ -+===================================================================== -+ -+Name -+ GET_TX_PWR -+ -+Synopsis -+ The host uses this command to retrieve the current Tx power level -+ -+Command -+ wmiconfig -i eth1 --getpower -+ -+Command Parameters -+ None -+ -+Reply Parameters -+ UINT16 dbM The current Tx power level specified in dbM -+ -+Reset Values -+ The maximum permitted by the regulatory domain -+ -+Restrictions -+ None -+ -+See Also -+ “SET_TX_PWR” -+ -+===================================================================== -+ -+ -+Name -+ GET_WOW_LIST -+ -+Synopsis -+ The host uses this command to retrieve the current list of WoW patterns. -+ -+Command -+ wmiconfig –getwowlist -+ -+Command Parameters -+ A_UINT8 filter_list_id ID of the list of WoW patterns to retrieve -+ -+Reply Value(s) -+ A_UINT16 num_filters Number of WoW patterns contained in the list -+ A_UINT8 wow_mode Current mode of WoW (enabled or disabled) -+ A_UINT8 host_mode Current host mode (asleep or awake) -+ WOW_FILTER wow_filters[1] -+ Contents of the WoW filter pattern list -+ (contains mask, pattern, offset and size -+ information for each of the patterns) -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+See Also -+ “SET_WSC_STATUS” -+ -+===================================================================== -+ -+ -+Name -+ LQ_THRESHOLD_PARAMS -+ -+Synopsis -+ Sets Link Quality thresholds, the sampling will happen at every unicast data frame -+ Tx if a certain threshold is met, and the corresponding event will be sent to the host. -+ -+Command -+ --lqThreshold ... -+ ... -+ -+Command Parameters -+ = 0 Disable link quality sampling -+ = 1 Enable link quality sampling -+ Above thresholds (value in [0,100]), in -+ ascending order -+ Below thresholds (value in [0,100]), in -+ ascending order -+ -+Command Values -+ See command parameters -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+ -+Name -+ OPT_TX_FRAME -+ -+Synopsis -+ Special feature, sends a special frame. -+ -+Command -+ wmiconfig --sendframe -+ -+ -+Command Parameters -+ { -+ A_UINT16 optIEDataLen; -+ A_UINT8 frmType; -+ A_UINT8 dstAddr[ATH_MAC_LEN]; -+ A_UINT8 bssid[ATH_MAC_LEN]; -+ A_UINT8 optIEData[1]; -+ } WMI_OPT_TX_FRAME_CMD; -+ -+Command Values -+ = 1 Probe request frame -+ = 2 Probe response frame -+ = 3 CPPP start -+ = 4 CPPP stop -+ -+Reset Value -+ None defined -+ -+Restrictions -+ Send a special frame only when special mode is on. -+ -+===================================================================== -+ -+ -+Name -+ RECONNECT -+ -+Synopsis -+ This command requests a reconnection to a BSS to which the AR6000 device was -+ formerly connected -+ -+Command -+ TBD -+ -+Command Parameters -+ UINT16 channel Provides a hint as to which channel was -+ used for a previous connection -+ UINT8 bssid[6] If set, indicates which BSSID to connect to -+ -+Command Values -+ None -+ -+Reset Values -+ None -+ -+Restrictions -+ None -+ -+See Also -+ “CONNECT_CMD” -+ -+===================================================================== -+ -+ -+Name -+ RSSI_THRESHOLD_PARAMS -+ -+Synopsis -+ Configures how the AR6000 device monitors and reports signal strength (RSSI) of the -+ connected BSS, which is used as a link quality metric. The four RSSI threshold sets (in -+ dbM) of the host specification divide the signal strength range into six segments. -+ When signal strength increases or decreases across one of the boundaries, an -+ RSSI_THRESHOLD event is signaled to the host. The host may then choose to take -+ action (such as influencing roaming). -+ -+Command -+ wmiconfig eth1 --rssiThreshold -+ ... -+ -+ ... -+ -+ -+Command Parameters -+ UINT8 weight Range in [1, 16] used to calculate average RSSI -+ UINT32 pollTime RSSI (signal strength) sampling frequency in -+ seconds (if pollTime = 0, single strength -+ sampling is disabled) -+ USER_RSS__THOLD tholds[12] Thresholds (6 x 2) -+ -+Command Values -+ None defined -+ -+Reset Values -+ pollTime is 0, and sampling is disabled -+ -+Restrictions -+ Can only be issued if the AR6000 device is connected -+ -+ -+===================================================================== -+ -+Name -+ SCAN_PARAMS -+ -+Synopsis -+ The minact parameter determines the minimum active channel dwell time, within -+ which if the STA receives any beacon, it remains on that channel until the maxact -+ channel dwell time. If the STA does not receive a beacon within the minact dwell -+ time, it switches to scan the next channel. -+ -+Command -+ wmiconfig -scan -minact= --maxact= -+ -+Command Parameters -+ UINT16 maxact Channel dwell time (in ms), default = 0 -+ UINT16 minact Channel dwell time (in ms), default = 105 -+ -+Command Values -+ See channel parameters -+ -+Reset Values -+ None defined -+ -+Restrictions -+ The minact value should be greater than 0; maxact should be between 5–65535 ms -+ and greater than minact -+ -+===================================================================== -+ -+ -+Name -+ SET_ACCESS_PARAMS -+ -+Synopsis -+ Allows the host to set access parameters for the wireless network. A thorough -+ understanding of IEEE 802.11 is required to properly manipulate these parameters. -+ -+Command -+ wmiconfig eth1 --acparams --txop --cwmin <0-15> -+ --cwmax <0-15> --aifsn<0-15> -+ -+Command Parameters -+ UINT16 txop The maximum time (expressed in units of -+ 32 ms) the device can spend transmitting -+ after acquiring the right to transmit -+ UINT8 eCWmin Minimum contention window -+ UINT8 eCWmax Maximum contention window -+ UINT8 aifsn The arbitration inter-frame space number -+ -+Command Values -+ None -+ -+Reset Values -+ Reasonable defaults that vary, between endpoints (prioritized streams) -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+ -+Name -+ SET_ADHOC_BSSID -+ -+Synopsis -+ Allows the host to set the BSSID for an ad hoc network. If a network with this BSSID -+ is not found, the target creates an ad hoc network with this BSSID after the connect -+ WMI command is triggered (e.g., by the SIOCSIWESSID IOCTL). -+ -+Command -+ wmiconfig eth1 --adhocbssid -+ -+Command Parameters -+ A_UINT8 bssid[ATH_MAC_LEN] BSSID is specified in xx:xx:xx:xx:xx:xx format -+ -+Command Values -+ None -+ -+Reset Values -+ None -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+ -+Name -+ SET_AKMP_PARAMS -+ -+Synopsis -+ Enables or disables multi PMKID mode. -+ -+Command -+ wmiconfig eth1 --setakmp --multipmkid= -+ -+Command Parameters -+ typedef struct { -+ A_UINT32 akmpInfo; -+ } WMI_SET_AKMP_PARAMS_CMD; -+ -+Command Values -+ akmpInfo; -+ bit[0] = 0 -+ MultiPMKID mode is disabled and PMKIDs that -+ were set using the WMI_SET_PMKID_CMD are -+ used in the [Re]AssocRequest frame. -+ bit[0] = 1 -+ MultiPMKID mode is enabled and PMKIDs issued -+ by the WMI_SET_PMKID_LIST_CMD are used in -+ the next [Re]AssocRequest sent to the AP. -+ -+Reset Values -+ MultiPMKID mode is disabled -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+ -+Name -+ SET_APPIE -+ -+Synopsis -+ Add an application-specified IE to a management frame. The maximum length is -+ 76 bytes. Including the length and the element ID, this translates to 78 bytes. -+ -+Command -+ wmiconfig --setappie , where: -+ -+ frame -+ One of beacon, probe, respon, assoc -+ -+ IE -+ A hex string beginning with DD (if = 0, no -+ IE is sent in the management frame) -+ -+Command Parameters -+ mgmtFrmType; -+ A WMI_MGMT_FRAME_TYPE -+ -+ ieLen; -+ Length of the IE to add to the GMT frame -+ -+Command Values -+ None -+ -+Reset Value -+ None defined -+ -+Restrictions -+ Supported only for the probe request and association request management frame -+types. Also, only one IE can be added per management frame type. -+ -+===================================================================== -+ -+ -+Name -+ SET_ASSOC_INFO -+ -+Synopsis -+ The host uses this command to specify any information elements (IEs) it wishes the -+ AR6000 device to add to all future association and reassociation requests. IEs must be -+ correct and are used as is by the device. IEs specified through this command are -+ cleared with a DISCONNECT. -+ -+Command -+ wmiconfig eth1 --setAssocIe -+ -+Command Parameters -+ UINT8 ieType Used directly in 802.11 frames -+ UINT8 bufferSize Size of assocInfo (in bytes) ranging from -+ 0–240. If = 0, previously set IEs are cleared. -+ UINT8 assocInfo[bufferSize] Used directly in 802.11 frames -+ -+Command Values -+ None -+ -+Reset Values -+ IEs are cleared -+ -+Restrictions -+ This command can only be issued in the DISCONNECTED state -+ -+===================================================================== -+ -+ -+Name -+ SET_AUTHMODE -+ -+Synopsis -+ Sets the 802.11 authentication mode of reconnection -+ -+Command -+ wmiconfig eth1 --setauthmode -+ -+Command Parameters -+ UINT8 mode -+ -+Command Values -+ mode = 0x00 Proceed with authentication during reconnect -+ = 0x01 Do not proceed with authentication during reconnect -+ -+Reset Values -+ Authentication -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+ -+Name -+ SET_BEACON_INT -+ -+Synopsis -+ Sets the beacon interval for an ad hoc network. Beacon interval selection may have an -+ impact on power savings. To some degree, a longer interval reduces power -+ consumption but also decreases throughput. A thorough understanding of IEEE -+ 802.11 ad hoc networks is required to use this command effectively. -+ -+Command -+ wmiconfig eth1 --ibssconintv -+ -+Command Parameters -+ UINT16 beaconInterval Specifies the beacon interval in TU units (1024 ms) -+ -+Command Values -+ None -+ -+Reset Values -+ The default beacon interval is 100 TUs (102.4 ms) -+ -+Restrictions -+ This command can only be issued before the AR6000 device starts an ad hoc network -+ -+See Also -+ “SET_IBSS_PM_CAPS” -+ -+===================================================================== -+ -+ -+Name -+ SET_BIT_RATE -+ -+Synopsis -+ The host uses this command to set the AR6000 device to a specific fixed rate. -+ -+Command -+ wmiconfig eth1 --setfixrates ... -+ -+Command Parameters -+ INT8 rateIndex -+ A WMI_BIT_RATE value -+ { -+ RATE_AUTO = -1 -+ RATE_1Mb = 0 -+ RATE_2Mb = 1 -+ RATE_5_5M = 2 -+ RATE_11Mb = 3 -+ RATE_6Mb = 4 -+ RATE_9Mb = 5 -+ RATE_12Mb = 6 -+ RATE_18Mb = 7 -+ RATE_24Mb = 8 -+ RATE_36Mb = 9 -+ RATE_48Mb = 10 -+ RATE_54Mb = 11 -+ } WMI_BIT_RATE -+ -+ -+Command Values -+ See command parameters -+ -+Reset Values -+ The dynamic rate is determined by the AR6000 device -+ -+Restrictions -+ This command is intended for use only during development/debug; it is not -+intended for use in production -+ -+See Also -+ “GET_BIT_RATE” -+ -+===================================================================== -+ -+ -+Name -+ SET_BMISS_TIME -+ -+Synopsis -+ This command sets the beacon miss (BMISS) time, which the AR6000 hardware use -+ to recognize missed beacons. When an excessive number (15) of consecutive beacons -+ are missed, the AR6000 consider switching to a different BSS. The time can be -+ specified in number of beacons or in TUs. -+ -+Command(s) -+ wmiconfig eth1 --setbmissbeacons= -+ wmiconfig eth1 --setbmisstime= -+ -+Command Parameters -+ UINT16 bmissTime Specifies the beacon miss time -+ [1000...5000] in TUs (1024 ms) -+ UINT16 bmissbeacons Specifies the number of beacons [5...50] -+ -+Command Values -+ None -+ -+Reset Values -+ bmissTime is 1500 TUs (1536 ms) -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+ -+Name -+ SET_BSS_FILTER -+ -+Synopsis -+ The host uses this to inform the AR6000 device of the types of networks about which -+ it wants to receive information from the “BSSINFO” event. As the device performs -+ either foreground or background scans, it applies the filter and sends “BSSINFO” -+ events only for the networks that pass the filter. If any of the bssFilter or the ieMask -+ filter matches, a BSS Info is sent to the host. The ieMask currently is used as a match -+ for the IEs in the beacons, probe reponses and channel switch action management -+ frame. See also “Scan and Roam” on page C-1. -+ -+ The BSS filter command has been enhanced to support IE based filtering. The IEs can -+ be specified as a bitmask through this command using this enum. -+ -+Command -+ wmiconfig eth1 –filter = --ieMask 0x -+ -+Command Parameters -+ UINT8 BssFilter -+ -+ Command Values -+ typedef struct { -+ A_UINT8 bssFilter; See WMI_BSS_FILTER -+ A_UINT32 ieMask; -+ } __ATTRIB_PACK WMI_BSS_FILTER_CMD; -+ -+ The ieMask can take this combination of values: -+ -+ enum { -+ BSS_ELEMID_CHANSWITCH = 0x01 -+ BSS_ELEMID_ATHEROS = 0x02, -+ } -+ -+Reply Value -+ None -+ -+Reset Value -+ BssFilter = NONE_BSS_FILTER (0) -+ -+Restrictions -+ None -+ -+See Also -+ “CONNECT_CMD” -+ -+===================================================================== -+ -+ -+Name -+ SET_BT_PARAMS -+ -+Synopsis -+ This command is used to set the status of a Bluetooth stream or set Bluetooth -+ coexistence register parameters. The stream may be an SCO or an A2DP stream and -+ its status can be started/stopped/suspended/resumed. -+ -+Command -+ wmiconfig –setBTparams -+ -+Command Parameters -+ struct { -+ union { -+ BT_PARAMS_SCO scoParams; -+ BT_PARAMS_A2DP a2dpParams; -+ BT_PARAMS_MISC miscParams; -+ BT_COEX_REGS regs; -+ } info; -+ A_UINT8 paramType; -+ struct { -+ A_UINT8 noSCOPkts; Number of SCO packets between consecutive PS-POLLs -+ A_UINT8 pspollTimeout; -+ A_UINT8 stompbt; -+ } BT_PARAMS_SCO; -+ struct { -+ A2DP BT stream parameters -+ A_UINT32 period; -+ A_UINT32 dutycycle; -+ A_UINT8 stompbt; -+ } BT_PARAMS_A2DP; -+ struct { -+ union { -+ WLAN_PROTECT_POLICY_TYPE protectParams; -+ A_UINT16 wlanCtrlFlags; -+ }info; -+ A_UINT8 paramType; -+ } BT_PARAMS_MISC; -+ struct { -+ BT coexistence registers values -+ A_UINT32 mode; Coexistence mode -+ A_UINT32 scoWghts; WLAN and BT weights -+ A_UINT32 a2dpWghts; -+ A_UINT32 genWghts; -+ A_UINT32 mode2; Coexistence mode2 -+ A_UINT8 setVal; -+ } BT_COEX_REGS; -+ -+Command Values -+ None defined -+ -+Reset Value -+ None -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+ -+Name -+ SET_BT_STATUS -+ -+Synopsis -+ Sets the status of a Bluetooth stream. The stream may be a SCO or an A2DP stream -+ and its status can be started/stopped/suspended/resumed. -+ -+Command -+ wmiconfig –setBTstatus -+ -+Command Parameters -+ { -+ A_UINT8 streamType; Stream type -+ A_UINT8 status; Stream status -+ }WMI_SET_BT_STATUS_CMD; -+ -+Command Values -+ { -+ BT_STREAM_UNDEF = 0 -+ BT_STREAM_SCO -+ SCO stream -+ BT_STREAM_A2DP -+ A2DP stream -+ BT_STREAM_MAX -+ } BT_STREAM_TYPE; -+ -+ { -+ BT_STATUS_UNDEF = 0 -+ BT_STATUS_START -+ BT_STATUS_STOP -+ BT_STATUS_RESUME -+ BT_STATUS_SUSPEND -+ BT_STATUS_MAX -+ } BT_STREAM_STATUS; -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+===================================================================== -+ -+ -+Name -+ SET_CHANNEL_PARAMETERS -+ -+Synopsis -+ Configures various WLAN parameters related to channels, sets the wireless mode, -+ and can restrict the AR6000 device to a subset of available channels. The list of -+ available channels varies depending on the wireless mode and the regulatory -+ domain. The device never operates on a channel outside of its regulatory domain. The -+ device starts to scan the list of channels right after this command. -+ -+Command -+ wmiconfig eth1 --wmode -+ -+Command Parameters -+ UINT8 phyMode See Values below. -+ UINT8 numberOfChannels -+ Number of channels in the channel array that -+ follows. If = 0, then the device uses all of the -+ channels permitted by the regulatory domain -+ and by the specified phyMode. -+ UINT16 channel[numberOfChannels] -+ Array listing the subset of channels (expressed -+ as frequencies in MHz) the host wants the -+ device to use. Any channel not permitted by -+ the specified phyMode or by the specified -+ regulatory domain is ignored by the device. -+ -+Command Values -+ phyMode = { -+ Wireless mode -+ 11a = 0x01 -+ 11g = 0x02 -+ 11ag = 0x03 -+ 11b = 0x04 -+ 11g only = 0x05 -+ } -+ -+Reset Values -+ phyMode -+ 11ag -+ 802.11a/g modules -+ 11g -+ 802.11g module -+ channels -+ Defaults to all channels permitted by the -+ current regulatory domain. -+ -+Restrictions -+ This command, if issued, should be issued soon after reset and prior to the first -+ connection. This command should only be issued in the DISCONNECTED state. -+ -+===================================================================== -+ -+ -+Name -+ SET_DISC_TIMEOUT -+ -+Synopsis -+ The host uses this command to configure the amount of time that the AR6000 should -+ spend when it attempts to reestablish a connection after losing link with its current -+ BSS. If this time limit is exceeded, the AR6000 send a “DISCONNECT” event. After -+ sending the “DISCONNECT” event the AR6000 continues to attempt to reestablish a -+ connection, but they do so at the interval corresponding to a foreground scan as -+ established by the “SET_SCAN_PARAMS” command. -+ -+ A timeout value of 0 indicates that the AR6000 will disable all autonomous roaming, -+ so that the AR6000 will not perform any scans after sending a “DISCONNECT” -+ event to the host. The state is maintained until a shutdown or host sets different -+ timeout value from 0. -+ -+Command -+ wmiconfig eth1 --disc= -+ -+Command Parameters -+ UINT8 disconnectTimeout -+ Specifies the time limit (in seconds) after -+ which a failure to reestablish a connection -+ results in a “DISCONNECT” event -+ -+Command Values -+ None -+ -+Reset Values -+ disconnectTimeout is 10 seconds -+ -+Restrictions -+ This command can only be issued while in a DISCONNECTED state -+ -+===================================================================== -+ -+ -+Name -+ SET_FIXRATES -+ -+Synopsis -+ By default, the AR6000 device uses all PHY rates based on mode of operation. If the -+ host application requires the device to use subset of supported rates, it can set those -+ rates with this command. In 802.11g mode, the AR6000 device takes the entire -+ 802.11g basic rate set and the rates specified with this command and uses it as the -+ supported rate set. -+ -+ This rate set is advertised in the probe request and the assoc/re-assoc request as -+ supported rates. Upon successful association, the device modifies the rate set pool -+ using the: intersection of AP-supported rates with the union of the 802.11g basic rate -+ set and rates set using this command. The device picks transmission rates from this -+ pool based on a rate control algorithm. -+ -+Command -+ TBD -+ -+Command Parameters -+ A_UINT16 fixRateMask; -+ The individual bit is an index for rate table, -+ and setting the that index to 1 would set that -+ corresponding rate. E.g., fixRateMask = 9 -+ (1001) sets 1 Mbps and 11 Mbps. -+ -+Command Values -+ None -+ -+Reset Value -+ None defined -+ -+Restrictions -+ None -+ -+See Also -+ “GET_FIXRATES” -+ -+===================================================================== -+ -+ -+Name -+ SET_WHAL_PARAM -+ -+Synopsis -+ An internal AR6000 command that is used to set certain hardware parameters. The -+ description of this command is in $WORKAREA/include/halapi.h. -+ -+Command -+ TBD -+ -+Command Parameters -+ ATH_HAL_SETCABTO_CMDID -+ Sets the timeout waiting for the multicast -+ traffic after a DTIM beacon (in TUs). -+ -+Command Values -+ None -+ -+Reset Value -+ Default = 10 TUs -+ -+Restrictions -+ This command should be executed before issuing a connect command. -+ -+===================================================================== -+ -+ -+Name -+ SET_HOST_SLEEP_MODE -+ -+Synopsis -+ The host uses this command to set the host mode to asleep or awake. All packets are -+ delivered to the host when the host mode is awake. When host mode is asleep, only if -+ WoW is enabled and the incoming packet matches one of the specified WoW -+ patterns, will the packet be delivered to the host. The host will also be woken up by -+ the target for pattern-matching packets and important events. -+ -+Command -+ wmiconfig –sethostmode= -+ -+Command Parameters -+ A_BOOL awake Set the host mode to awake -+ A_BOOL asleep Set the host mode to asleep -+ -+Command Values -+ 1 = awake, 0 = asleep -+ -+Reset Value -+ None defined (default host mode is awake) -+ -+Restrictions -+ None -+ -+ -+===================================================================== -+ -+Name -+ SET_IBSS_PM_CAPS -+ -+Synopsis -+ Used to support a non-standard power management scheme for an ad hoc wireless -+ network consisting of up to eight stations (STAs) that support this form of power -+ saving (e.g., Atheros-based STAs). A thorough understanding of IEEE 802.11 ad hoc -+ networks is required to use this command effectively. -+ -+Command -+ wmiconfig eth1 --ibsspmcaps --ps= -+ --aw= -+ --ttl=