From b9d59d08a6c7362a9558dd5f67cdf85cc3a1b7c8 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sun, 5 Aug 2018 00:40:10 +0530 Subject: [PATCH] ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3 Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5 Author: Stefan Mavrodiev Date: Wed May 16 14:38:08 2018 +0300 ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board Note: - Update sun7i-a20-primo73.dts as per Linux, since this dts is U-Boot specific. - Drop sun7i-a20-olimex-som-evb-emmc.dts since no board added for this. Signed-off-by: Jagan Teki --- arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts | 32 +- arch/arm/dts/sun7i-a20-bananapi.dts | 106 +- arch/arm/dts/sun7i-a20-bananapro.dts | 73 +- arch/arm/dts/sun7i-a20-cubieboard2.dts | 56 +- arch/arm/dts/sun7i-a20-cubietruck.dts | 84 +- arch/arm/dts/sun7i-a20-hummingbird.dts | 30 +- arch/arm/dts/sun7i-a20-i12-tvbox.dts | 34 +- arch/arm/dts/sun7i-a20-icnova-swac.dts | 6 +- arch/arm/dts/sun7i-a20-itead-ibox.dts | 12 +- arch/arm/dts/sun7i-a20-lamobo-r1.dts | 73 +- arch/arm/dts/sun7i-a20-m3.dts | 12 +- arch/arm/dts/sun7i-a20-mk808c.dts | 43 +- arch/arm/dts/sun7i-a20-olimex-som-evb.dts | 108 +- arch/arm/dts/sun7i-a20-olimex-som204-evb.dts | 42 +- arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 58 +- .../dts/sun7i-a20-olinuxino-lime2-emmc.dts | 6 +- arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 154 +- arch/arm/dts/sun7i-a20-olinuxino-micro.dts | 116 +- arch/arm/dts/sun7i-a20-orangepi-mini.dts | 77 +- arch/arm/dts/sun7i-a20-orangepi.dts | 42 +- arch/arm/dts/sun7i-a20-pcduino3-nano.dts | 55 +- arch/arm/dts/sun7i-a20-pcduino3.dts | 26 +- arch/arm/dts/sun7i-a20-primo73.dts | 58 +- arch/arm/dts/sun7i-a20-wexler-tab7200.dts | 30 +- arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts | 20 +- arch/arm/dts/sun7i-a20.dtsi | 1505 +++++++---------- include/dt-bindings/clock/sun7i-a20-ccu.h | 53 + 27 files changed, 1500 insertions(+), 1411 deletions(-) create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts index 4c03cc3fd7..763cb03033 100644 --- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -109,6 +120,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -130,6 +145,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -144,6 +169,10 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + &ir0 { pinctrl-names = "default"; pinctrl-0 = <&ir0_rx_pins_a>; @@ -155,8 +184,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts index 67c8a7644b..70dfc4ac0b 100644 --- a/arch/arm/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/dts/sun7i-a20-bananapi.dts @@ -48,7 +48,6 @@ #include #include -#include / { model = "LeMaker Banana Pi"; @@ -64,6 +63,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -110,6 +120,10 @@ >; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -131,6 +145,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -160,8 +184,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; @@ -178,32 +201,77 @@ }; &pio { + gpio-line-names = + /* PA */ + "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", + "ETXD2", "ETXD1", "ETXD0", + "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO", + "ETXEN", "ETXCK", "ECRS", + "ECOL", "ETXERR", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PB */ + "PMU-SCK", "PMU-SDA", "", "", "", "", "", "", + "", "USB0-DRV", "", "", "", "", "", "", + "", "", "", "", "SCL", "SDA", "", "", + "", "", "", "", "", "", "", "", + /* PC */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PD */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PE */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PF */ + "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3", + "SD0-D2", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PG */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PH */ + "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "", + "", "", "SD0-DET", "", "", "", "", "", + "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN", + "LED1", "", "", "", "", "", "", "", + /* PI */ + "", "", "", "IO-GCLK", "", "", "", "", + "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI", + "SPI-MISO", "SPI-CE1", "", + "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", + "", "", "", "", "", "", "", ""; + usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; gmac_power_pin_bananapi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bananapi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH24"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts index 18fcc87f46..0898eb6162 100644 --- a/arch/arm/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/dts/sun7i-a20-bananapro.dts @@ -76,6 +76,13 @@ }; }; + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_bananapro>; + reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; + }; + reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -87,23 +94,16 @@ enable-active-high; gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; }; - - reg_vmmc3: vmmc3 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_bananapro>; - regulator-name = "vmmc3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; - }; }; &ahci { status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -158,18 +158,26 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; }; &ohci0 { @@ -182,45 +190,34 @@ &pio { gmac_power_pin_bananapro: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bananapro: led_pins@0 { - allwinner,pins = "PH24", "PG2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH24", "PG2"; + function = "gpio_out"; }; mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH0"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH0"; + function = "gpio_out"; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH1"; + function = "gpio_out"; }; vmmc3_pin_bananapro: vmmc3_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH22"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts index 1fa832d7b4..942ac9dfd4 100644 --- a/arch/arm/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts @@ -48,7 +48,6 @@ #include #include -#include / { model = "Cubietech Cubieboard2"; @@ -62,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -92,6 +102,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -112,6 +126,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -138,11 +162,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -160,17 +183,14 @@ &pio { led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH20", "PH21"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -178,13 +198,12 @@ status = "okay"; }; -&usb_otg { - dr_mode = "otg"; +#include "axp209.dtsi" + +&ac_power_supply { status = "okay"; }; -#include "axp209.dtsi" - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -224,6 +243,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts index 83f39b0362..5649161de1 100644 --- a/arch/arm/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/dts/sun7i-a20-cubietruck.dts @@ -48,7 +48,6 @@ #include #include -#include / { model = "Cubietech Cubietruck"; @@ -62,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -127,6 +137,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -147,6 +161,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -179,11 +203,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -196,7 +219,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; @@ -207,7 +230,7 @@ &mmc3_pins_a { /* AP6210 requires pull-up */ - allwinner,pull = ; + bias-pull-up; }; &ohci0 { @@ -224,45 +247,33 @@ &pio { ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH12"; + function = "gpio_out"; }; led_pins_cubietruck: led_pins@0 { - allwinner,pins = "PH7", "PH11", "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH7", "PH11", "PH20", "PH21"; + function = "gpio_out"; }; mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH9"; + function = "gpio_out"; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH17"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH19"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH22"; + function = "gpio_in"; }; }; @@ -280,6 +291,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -336,11 +355,16 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts index 37f4a54974..1f0e5ecbf0 100644 --- a/arch/arm/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/dts/sun7i-a20-hummingbird.dts @@ -48,7 +48,6 @@ #include #include -#include / { model = "Merrii A20 Hummingbird"; @@ -161,11 +160,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -188,31 +186,23 @@ &pio { ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH15"; + function = "gpio_out"; }; usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH2"; + function = "gpio_out"; }; mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH9"; + function = "gpio_out"; }; gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - allwinner,pins = "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH16"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts index 1e6bd360da..2e3f2f29d1 100644 --- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "I12 / Q5 / QT840A A20 tvbox"; @@ -158,11 +157,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -174,7 +172,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; @@ -185,7 +183,7 @@ &mmc3_pins_a { /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = ; + bias-pull-up; }; &ohci0 { @@ -198,31 +196,23 @@ &pio { vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH2"; + function = "gpio_out"; }; vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH12"; + function = "gpio_out"; }; gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - allwinner,pins = "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH21"; + function = "gpio_out"; }; led_pins_i12_tvbox: led_pins@0 { - allwinner,pins = "PH9", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH9", "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts index f5b5325a70..926fa194eb 100644 --- a/arch/arm/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "ICnova-A20 SWAC"; @@ -105,11 +104,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */ - cd-inverted; + cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */ status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts index 10d48cbf81..1b05ba466e 100644 --- a/arch/arm/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts @@ -121,20 +121,18 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; &pio { led_pins_itead_core: led_pins@0 { - allwinner,pins = "PH20","PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH20","PH21"; + function = "gpio_out"; + drive-strength = <20>; }; }; diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts index 73c05dab0a..b1ab7c1c33 100644 --- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "Lamobo R1"; @@ -62,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -86,10 +96,6 @@ }; }; -&ahci_pwr_pin_a { - allwinner,pins = "PB3"; -}; - &ahci { target-supply = <®_ahci_5v>; status = "okay"; @@ -103,6 +109,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -167,7 +177,7 @@ reg = <8>; label = "cpu"; ethernet = <&gmac>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; fixed-link { speed = <1000>; full-duplex; @@ -178,6 +188,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -207,8 +227,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; @@ -222,36 +241,38 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; gmac_power_pin_lamobo_r1: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH23"; + function = "gpio_out"; }; led_pins_lamobo_r1: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH24"; + function = "gpio_out"; }; }; #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_ahci_5v { gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ status = "okay"; @@ -326,10 +347,6 @@ status = "okay"; }; -&usb2_vbus_pin_a { - allwinner,pins = "PH12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts index 8d9ea48dd9..e91a209850 100644 --- a/arch/arm/dts/sun7i-a20-m3.dts +++ b/arch/arm/dts/sun7i-a20-m3.dts @@ -48,7 +48,6 @@ #include #include -#include / { model = "Mele M3"; @@ -118,11 +117,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -145,10 +143,8 @@ &pio { led_pins_m3: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun7i-a20-mk808c.dts b/arch/arm/dts/sun7i-a20-mk808c.dts index 90ff4a2670..6109f794a9 100644 --- a/arch/arm/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/dts/sun7i-a20-mk808c.dts @@ -53,7 +53,6 @@ #include #include -#include / { model = "mk808c"; @@ -67,12 +66,27 @@ chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; }; &codec { status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -81,6 +95,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -110,11 +134,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -132,17 +155,13 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH5"; + function = "gpio_in"; }; }; diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts index 23aacce4d6..f080f82b58 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts @@ -48,7 +48,6 @@ #include #include #include -#include / { model = "Olimex A20-Olimex-SOM-EVB"; @@ -62,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -80,6 +90,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -88,6 +102,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &codec { status = "okay"; }; @@ -104,6 +122,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -116,6 +144,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + &lradc { vref-supply = <®_vcc3v0>; status = "okay"; @@ -172,11 +212,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -185,8 +224,7 @@ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ - cd-inverted; + cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */ status = "okay"; }; @@ -204,38 +242,30 @@ &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olimex_som_evb: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 { - allwinner,pins = "PH0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH0"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH5"; + function = "gpio_in"; }; }; @@ -284,12 +314,38 @@ status = "okay"; }; +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>, + <&spi1_cs0_pins_a>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts index c183920cef..3d7b5c848f 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts @@ -32,6 +32,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -65,6 +76,12 @@ status = "okay"; }; +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; +}; + &codec { status = "okay"; }; @@ -73,6 +90,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -98,6 +119,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -141,8 +172,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -181,6 +211,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_ahci_5v { gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts index 35ad7006c5..d20fd03596 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts @@ -49,7 +49,6 @@ #include #include -#include / { model = "Olimex A20-OLinuXino-LIME"; @@ -63,6 +62,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -81,6 +91,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -101,6 +115,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -131,11 +155,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -153,31 +176,26 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 10d307408f..81f376f2a4 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -57,10 +57,8 @@ &pio { mmc2_pins_nrst: mmc2-rst-pin { - allwinner,pins = "PC16"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC16"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts index d5c796c8d1..b828677f33 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "Olimex A20-OLinuXino-LIME2"; @@ -60,6 +59,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -86,6 +96,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -106,63 +120,25 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - - acin-supply = <®_axp_ipsout>; - vin2-supply = <®_axp_ipsout>; - vin3-supply = <®_axp_ipsout>; - ldo24in-supply = <®_axp_ipsout>; - ldo3in-supply = <®_axp_ipsout>; - - regulators { - vdd_rtc: ldo1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - }; - - avcc: ldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcc_csi0: ldo3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - vcc_csi1: ldo4 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_cpu: dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <2275000>; - regulator-always-on; - }; - - vdd_int: dcdc3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - }; }; }; @@ -180,11 +156,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -202,38 +177,31 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; usb0_vbus_pin_lime2: usb0_vbus_pin@0 { - allwinner,pins = "PC17"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC17"; + function = "gpio_out"; }; }; @@ -243,6 +211,48 @@ status = "okay"; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi0"; +}; + +®_ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi1"; +}; + ®_usb0_vbus { pinctrl-0 = <&usb0_vbus_pin_lime2>; gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts index 7e3006f6a7..866d230593 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts @@ -49,7 +49,6 @@ #include #include #include -#include / { model = "Olimex A20-Olinuxino Micro"; @@ -67,6 +66,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -85,6 +95,18 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -95,7 +117,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -105,19 +127,25 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -195,11 +223,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -208,8 +235,7 @@ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - cd-inverted; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ status = "okay"; }; @@ -226,35 +252,67 @@ }; &pio { + gmac_txerr: gmac_txerr@0 { + pins = "PA17"; + function = "gmac"; + }; + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH11"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_ahci_5v { status = "okay"; }; @@ -308,6 +366,10 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts index 2be04c438b..f5c7178eb0 100644 --- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts @@ -48,7 +48,6 @@ #include #include -#include / { model = "Orange Pi Mini"; @@ -62,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -99,6 +109,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -120,6 +134,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -145,8 +169,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; @@ -155,8 +178,7 @@ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - cd-inverted; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ status = "okay"; }; @@ -166,52 +188,41 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH11"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH22"; + function = "gpio_out"; }; gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH23"; + function = "gpio_out"; }; led_pins_orangepi: led_pins@0 { - allwinner,pins = "PH24", "PH25"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH24", "PH25"; + function = "gpio_out"; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH26"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH26"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts index 71125bf645..7a4244e575 100644 --- a/arch/arm/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/dts/sun7i-a20-orangepi.dts @@ -48,7 +48,6 @@ #include #include -#include / { model = "Orange Pi"; @@ -136,8 +135,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; @@ -147,45 +145,35 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH22"; + function = "gpio_out"; }; gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH23"; + function = "gpio_out"; }; led_pins_orangepi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH24"; + function = "gpio_out"; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH26"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH26"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts index ddac7328b8..bfca960b03 100644 --- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -90,6 +101,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -110,6 +125,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -130,11 +155,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -152,31 +176,24 @@ &pio { ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH2"; + function = "gpio_out"; }; led_pins_pcduino3_nano: led_pins@0 { - allwinner,pins = "PH16", "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH16", "PH15"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - allwinner,pins = "PD2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PD2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts index 7f449b6a28..c576f101fb 100644 --- a/arch/arm/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/dts/sun7i-a20-pcduino3.dts @@ -48,7 +48,6 @@ #include #include #include -#include / { model = "LinkSprite pcDuino3"; @@ -107,10 +106,6 @@ status = "okay"; }; -&ahci_pwr_pin_a { - allwinner,pins = "PH2"; -}; - &codec { status = "okay"; }; @@ -161,7 +156,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -182,24 +177,19 @@ &pio { led_pins_pcduino3: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH15", "PH16"; + function = "gpio_out"; }; key_pins_pcduino3: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH17", "PH18", "PH19"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/dts/sun7i-a20-primo73.dts b/arch/arm/dts/sun7i-a20-primo73.dts index 0658f82675..b7294e0348 100644 --- a/arch/arm/dts/sun7i-a20-primo73.dts +++ b/arch/arm/dts/sun7i-a20-primo73.dts @@ -60,43 +60,33 @@ chosen { stdout-path = "serial0:115200n8"; }; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - /* rtl8188etv wifi is connected here */ - status = "okay"; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ + status = "okay"; +}; - pinctrl@01c20800 { - usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - }; - }; +®_usb2_vbus { + gpio = <&pio 7 12 0>; /* PH12 */ + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - gpio = <&pio 7 12 0>; /* PH12 */ - status = "okay"; - }; +&usbphy { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts index 2f6b21addd..8202c87ca6 100644 --- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts @@ -151,11 +151,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -173,31 +172,24 @@ &pio { bl_enable_pin: bl_enable_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH15"; + function = "gpio_out"; }; ts_reset_pin: ts_reset_pin@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts index dc31d476ef..ff5c108658 100644 --- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -120,11 +120,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -137,7 +136,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; @@ -160,17 +159,14 @@ &pio { vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH9"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi index 4394711e5a..e529e4ff21 100644 --- a/arch/arm/dts/sun7i-a20.dtsi +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -46,10 +46,9 @@ #include #include - -#include #include -#include +#include +#include / { interrupt-parent = <&gic>; @@ -67,9 +66,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&de_be0_clk>, - <&tcon0_ch1_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>, + <&ccu CLK_HDMI>; status = "disabled"; }; @@ -77,9 +77,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&ahb_gates 36>, <&ahb_gates 44>, - <&de_be0_clk>, <&tcon0_ch0_clk>, - <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>, + <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; @@ -87,10 +87,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, - <&de_be0_clk>, <&tcon0_ch1_clk>, - <&dram_gates 5>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, + <&ccu CLK_AHB_DE_BE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>, + <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; }; @@ -103,7 +103,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ @@ -116,8 +116,6 @@ 144000 1000000 >; #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <6>; }; cpu@1 { @@ -182,23 +180,13 @@ #size-cells = <1>; ranges; - osc24M: clk@01c20050 { + osc24M: clk@1c20050 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; + compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc3M: osc3M_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -206,528 +194,6 @@ clock-output-names = "osc32k"; }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&pll3>; - clock-div = <1>; - clock-mult = <2>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-pll4-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6", - "pll6_div_4"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&pll7>; - clock-div = <1>; - clock-mult = <2>; - clock-output-names = "pll7-2x"; - }; - - pll8: clk@01c20040 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-pll4-clk"; - reg = <0x01c20040 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll8"; - }; - - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&pll6 3>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 3>; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <5>, <6>, <7>, <8>, - <9>, <10>, <11>, <12>, - <13>, <14>, <16>, - <17>, <18>, <20>, <21>, - <22>, <23>, <25>, - <28>, <32>, <33>, <34>, - <35>, <36>, <37>, <40>, - <41>, <42>, <43>, - <44>, <45>, <46>, - <47>, <49>, <50>, - <52>; - clock-output-names = "ahb_usb0", "ahb_ehci0", - "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", - "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", - "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms", - "ahb_nand", "ahb_sdram", "ahb_ace", - "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", - "ahb_spi2", "ahb_spi3", "ahb_sata", - "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0", - "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0", - "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0", - "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", - "ahb_de_fe1", "ahb_gmac", "ahb_mp", - "ahb_mali"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <5>, <6>, <7>, - <8>, <10>; - clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_i2s0", "apb0_i2s1", - "apb0_pio", "apb0_ir0", "apb0_ir1", - "apb0_i2s2", "apb0_keypad"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <5>, <6>, <7>, - <15>, <16>, <17>, - <18>, <19>, <20>, - <21>, <22>, <23>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_i2c3", "apb1_can", - "apb1_scr", "apb1_ps20", "apb1_ps21", - "apb1_i2c4", "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3", "apb1_uart4", - "apb1_uart5", "apb1_uart6", "apb1_uart7"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@01c20094 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20094 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc3", - "mmc3_output", - "mmc3_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - pata_clk: clk@01c200ac { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200ac 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "pata"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - ir1_clk: clk@01c200b4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir1"; - }; - - i2s0_clk: clk@01c200b8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200b8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s0"; - }; - - ac97_clk: clk@01c200bc { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200bc 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "ac97"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - keypad_clk: clk@01c200c4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200c4 0x4>; - clocks = <&osc24M>; - clock-output-names = "keypad"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", - "usb_phy"; - }; - - spi3_clk: clk@01c200d4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200d4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi3"; - }; - - i2s1_clk: clk@01c200d8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200d8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s1"; - }; - - i2s2_clk: clk@01c200dc { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200dc 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s2"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-dram-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, <2>, - <3>, - <4>, - <5>, <6>, - <15>, - <24>, <25>, - <26>, <27>, - <28>, <29>; - clock-output-names = "dram_ve", - "dram_csi0", "dram_csi1", - "dram_ts", - "dram_tvd", - "dram_tve0", "dram_tve1", - "dram_output", - "dram_de_fe1", "dram_de_fe0", - "dram_de_be0", "dram_de_be1", - "dram_de_mp", "dram_ace"; - }; - - de_be0_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be0"; - }; - - de_be1_clk: clk@01c20108 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20108 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be1"; - }; - - de_fe0_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe0"; - }; - - de_fe1_clk: clk@01c20110 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20110 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe1"; - }; - - tcon0_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch0-sclk"; - - }; - - tcon1_ch0_clk: clk@01c2011c { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2011c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch0-sclk"; - - }; - - tcon0_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch1-sclk"; - - }; - - tcon1_ch1_clk: clk@01c20130 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c20130 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch1-sclk"; - - }; - - ve_clk: clk@01c2013c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-ve-clk"; - reg = <0x01c2013c 0x4>; - clocks = <&pll4>; - clock-output-names = "ve"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; - clock-output-names = "mbus"; - }; - /* * The following two are dummy clocks, placeholders * used in the gmac_tx clock. The gmac driver will @@ -737,71 +203,50 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: clk@2 { + mii_phy_tx_clk: clk@1 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: clk@3 { + gmac_int_tx_clk: clk@2 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; clock-output-names = "gmac_int_tx"; }; - gmac_tx_clk: clk@01c20164 { + gmac_tx_clk: clk@1c20164 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c20164 0x4>; clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; clock-output-names = "gmac_tx"; }; + }; - /* - * Dummy clock used by output clocks - */ - osc24M_32k: clk@1 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <750>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc24M_32k"; - }; - - clk_out_a: clk@01c201f0 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-out-clk"; - reg = <0x01c201f0 0x4>; - clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; - clock-output-names = "clk_out_a"; - }; - clk_out_b: clk@01c201f4 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-out-clk"; - reg = <0x01c201f4 0x4>; - clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; - clock-output-names = "clk_out_b"; - }; + de: display-engine { + compatible = "allwinner,sun7i-a20-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@01c00000 { + sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; @@ -815,14 +260,14 @@ }; }; - sram_d: sram@00010000 { + sram_d: sram@10000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00010000 0x1000>; - otg_sram: sram-section@0000 { + otg_sram: sram-section@0 { compatible = "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; @@ -830,7 +275,7 @@ }; }; - nmi_intc: interrupt-controller@01c00030 { + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; #interrupt-cells = <2>; @@ -838,19 +283,19 @@ interrupts = ; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = ; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; - nfc: nand@01c03000 { + nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = ; - clocks = <&ahb_gates 13>, <&nand_clk>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 3>; dma-names = "rxtx"; @@ -859,11 +304,11 @@ #size-cells = <0>; }; - spi0: spi@01c05000 { + spi0: spi@1c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = ; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -871,13 +316,14 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <4>; }; - spi1: spi@01c06000 { + spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = ; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; @@ -885,18 +331,19 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; - emac: ethernet@01c0b000 { + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = ; - clocks = <&ahb_gates 17>; + clocks = <&ccu CLK_AHB_EMAC>; allwinner,sram = <&emac_sram 1>; status = "disabled"; }; - mdio: mdio@01c0b080 { + mdio: mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -904,14 +351,111 @@ #size-cells = <0>; }; - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun7i-a20-mmc", - "allwinner,sun5i-a13-mmc"; + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun7i-a20-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = ; + resets = <&ccu RST_TCON0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD0>, + <&ccu CLK_TCON0_CH0>, + <&ccu CLK_TCON0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + + tcon0_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun7i-a20-tcon"; + reg = <0x01c0d000 0x1000>; + interrupts = ; + resets = <&ccu RST_TCON1>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD1>, + <&ccu CLK_TCON1_CH0>, + <&ccu CLK_TCON1_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon1-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon1>; + }; + + tcon1_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_AHB_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -922,14 +466,13 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { - compatible = "allwinner,sun7i-a20-mmc", - "allwinner,sun5i-a13-mmc"; + mmc1: mmc@1c10000 { + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_AHB_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -940,14 +483,13 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { - compatible = "allwinner,sun7i-a20-mmc", - "allwinner,sun5i-a13-mmc"; + mmc2: mmc@1c11000 { + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_AHB_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -958,14 +500,13 @@ #size-cells = <0>; }; - mmc3: mmc@01c12000 { - compatible = "allwinner,sun7i-a20-mmc", - "allwinner,sun5i-a13-mmc"; + mmc3: mmc@1c12000 { + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb_gates 11>, - <&mmc3_clk 0>, - <&mmc3_clk 1>, - <&mmc3_clk 2>; + clocks = <&ccu CLK_AHB_MMC3>, + <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -976,10 +517,10 @@ #size-cells = <0>; }; - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = ; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -989,51 +530,97 @@ status = "disabled"; }; - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = ; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = ; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - crypto: crypto-engine@01c15000 { - compatible = "allwinner,sun4i-a10-crypto"; + crypto: crypto-engine@1c15000 { + compatible = "allwinner,sun7i-a20-crypto", + "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; - clocks = <&ahb_gates 5>, <&ss_clk>; + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; clock-names = "ahb", "mod"; }; - spi2: spi@01c17000 { + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun7i-a20-hdmi", + "allwinner,sun5i-a10s-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = ; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -1041,41 +628,42 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; - ahci: sata@01c18000 { + ahci: sata@1c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = ; - clocks = <&pll6 0>, <&ahb_gates 25>; + clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>; status = "disabled"; }; - ehci1: usb@01c1c000 { + ehci1: usb@1c1c000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = ; - clocks = <&ahb_gates 3>; + clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - ohci1: usb@01c1c400 { + ohci1: usb@1c1c400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = ; - clocks = <&usb_clk 7>, <&ahb_gates 4>; + clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - spi3: spi@01c1f000 { + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; interrupts = ; - clocks = <&ahb_gates 23>, <&spi3_clk>; + clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 31>, <&dma SUN4I_DMA_DEDICATED 30>; @@ -1083,319 +671,258 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; - pio: pinctrl@01c20800 { + ccu: clock@1c20000 { + compatible = "allwinner,sun7i-a20-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; interrupts = ; - clocks = <&apb0_gates 5>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; + can0_pins_a: can0@0 { + pins = "PH20", "PH21"; + function = "can"; + }; + clk_out_a_pins_a: clk_out_a@0 { - allwinner,pins = "PI12"; - allwinner,function = "clk_out_a"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI12"; + function = "clk_out_a"; }; clk_out_b_pins_a: clk_out_b@0 { - allwinner,pins = "PI13"; - allwinner,function = "clk_out_b"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI13"; + function = "clk_out_b"; }; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "emac"; }; gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "gmac"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "gmac"; }; gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA10", - "PA11", "PA12", "PA13", - "PA15", "PA16"; - allwinner,function = "gmac"; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = ; - allwinner,pull = ; + drive-strength = <40>; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB18", "PB19"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB20", "PB21"; + function = "i2c2"; }; i2c3_pins_a: i2c3@0 { - allwinner,pins = "PI0", "PI1"; - allwinner,function = "i2c3"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI0", "PI1"; + function = "i2c3"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB4"; + function = "ir0"; }; ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB3"; + function = "ir0"; }; ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB23"; + function = "ir1"; }; ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB22"; + function = "ir1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", - "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4", "PI5", "PI6", - "PI7", "PI8", "PI9"; - allwinner,function = "mmc3"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + function = "mmc3"; + drive-strength = <30>; + bias-pull-up; }; ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI20", "PI21"; + function = "ps2"; }; ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH12", "PH13"; + function = "ps2"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB2"; + function = "pwm"; }; pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI3"; + function = "pwm"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB13"; + function = "spdif"; + bias-pull-up; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI11", "PI12", "PI13"; - allwinner,function = "spi0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI11", "PI12", "PI13"; + function = "spi0"; }; spi0_cs0_pins_a: spi0_cs0@0 { - allwinner,pins = "PI10"; - allwinner,function = "spi0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI10"; + function = "spi0"; }; spi0_cs1_pins_a: spi0_cs1@0 { - allwinner,pins = "PI14"; - allwinner,function = "spi0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI14"; + function = "spi0"; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI17", "PI18", "PI19"; - allwinner,function = "spi1"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI17", "PI18", "PI19"; + function = "spi1"; }; spi1_cs0_pins_a: spi1_cs0@0 { - allwinner,pins = "PI16"; - allwinner,function = "spi1"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI16"; + function = "spi1"; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC20", "PC21", "PC22"; - allwinner,function = "spi2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC20", "PC21", "PC22"; + function = "spi2"; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB15", "PB16", "PB17"; - allwinner,function = "spi2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB15", "PB16", "PB17"; + function = "spi2"; }; spi2_cs0_pins_a: spi2_cs0@0 { - allwinner,pins = "PC19"; - allwinner,function = "spi2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC19"; + function = "spi2"; }; spi2_cs0_pins_b: spi2_cs0@1 { - allwinner,pins = "PB14"; - allwinner,function = "spi2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB14"; + function = "spi2"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB22", "PB23"; + function = "uart0"; }; uart2_pins_a: uart2@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; - allwinner,function = "uart2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI16", "PI17", "PI18", "PI19"; + function = "uart2"; }; uart3_pins_a: uart3@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG6", "PG7", "PG8", "PG9"; + function = "uart3"; }; uart3_pins_b: uart3@1 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH0", "PH1"; + function = "uart3"; }; uart4_pins_a: uart4@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "uart4"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG10", "PG11"; + function = "uart4"; }; uart4_pins_b: uart4@1 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "uart4"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH4", "PH5"; + function = "uart4"; }; uart5_pins_a: uart5@0 { - allwinner,pins = "PI10", "PI11"; - allwinner,function = "uart5"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI10", "PI11"; + function = "uart5"; }; uart6_pins_a: uart6@0 { - allwinner,pins = "PI12", "PI13"; - allwinner,function = "uart6"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI12", "PI13"; + function = "uart6"; }; uart7_pins_a: uart7@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "uart7"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PI20", "PI21"; + function = "uart7"; }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = , @@ -1407,18 +934,18 @@ clocks = <&osc24M>; }; - wdt: watchdog@01c20c90 { + wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; - rtc: rtc@01c20d00 { + rtc: rtc@1c20d00 { compatible = "allwinner,sun7i-a20-rtc"; reg = <0x01c20d00 0x20>; interrupts = ; }; - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; @@ -1426,12 +953,12 @@ status = "disabled"; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; interrupts = ; - clocks = <&apb0_gates 1>, <&spdif_clk>; + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma SUN4I_DMA_NORMAL 2>, <&dma SUN4I_DMA_NORMAL 2>; @@ -1439,30 +966,30 @@ status = "disabled"; }; - ir0: ir@01c21800 { + ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; + clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; clock-names = "apb", "ir"; interrupts = ; reg = <0x01c21800 0x40>; status = "disabled"; }; - ir1: ir@01c21c00 { + ir1: ir@1c21c00 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 7>, <&ir1_clk>; + clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; clock-names = "apb", "ir"; interrupts = ; reg = <0x01c21c00 0x40>; status = "disabled"; }; - i2s1: i2s@01c22000 { + i2s1: i2s@1c22000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22000 0x400>; interrupts = ; - clocks = <&apb0_gates 4>, <&i2s1_clk>; + clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 4>, <&dma SUN4I_DMA_NORMAL 4>; @@ -1470,12 +997,12 @@ status = "disabled"; }; - i2s0: i2s@01c22400 { + i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; interrupts = ; - clocks = <&apb0_gates 3>, <&i2s0_clk>; + clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 3>, <&dma SUN4I_DMA_NORMAL 3>; @@ -1483,19 +1010,19 @@ status = "disabled"; }; - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = ; status = "disabled"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun7i-a20-codec"; reg = <0x01c22c00 0x40>; interrupts = ; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -1503,17 +1030,17 @@ status = "disabled"; }; - sid: eeprom@01c23800 { + sid: eeprom@1c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; }; - i2s2: i2s@01c24400 { + i2s2: i2s@1c24400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c24400 0x400>; interrupts = ; - clocks = <&apb0_gates 8>, <&i2s2_clk>; + clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 6>, <&dma SUN4I_DMA_NORMAL 6>; @@ -1521,154 +1048,204 @@ status = "disabled"; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = ; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; + clocks = <&ccu CLK_APB1_UART0>; status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; + clocks = <&ccu CLK_APB1_UART4>; status = "disabled"; }; - uart5: serial@01c29400 { + uart5: serial@1c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; + clocks = <&ccu CLK_APB1_UART5>; status = "disabled"; }; - uart6: serial@01c29800 { + uart6: serial@1c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 22>; + clocks = <&ccu CLK_APB1_UART6>; status = "disabled"; }; - uart7: serial@01c29c00 { + uart7: serial@1c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 23>; + clocks = <&ccu CLK_APB1_UART7>; status = "disabled"; }; - i2c0: i2c@01c2ac00 { + ps20: ps2@1c2a000 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a000 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_PS20>; + status = "disabled"; + }; + + ps21: ps2@1c2a400 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a400 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_PS21>; + status = "disabled"; + }; + + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c3: i2c@01c2b800 { + i2c3: i2c@1c2b800 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; interrupts = ; - clocks = <&apb1_gates 3>; + clocks = <&ccu CLK_APB1_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c4: i2c@01c2c000 { + can0: can@1c2bc00 { + compatible = "allwinner,sun7i-a20-can", + "allwinner,sun4i-a10-can"; + reg = <0x01c2bc00 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_CAN>; + status = "disabled"; + }; + + i2c4: i2c@1c2c000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; interrupts = ; - clocks = <&apb1_gates 15>; + clocks = <&ccu CLK_APB1_I2C4>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - gmac: ethernet@01c50000 { + mali: gpu@1c40000 { + compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + + gmac: ethernet@1c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>; interrupts = ; interrupt-names = "macirq"; - clocks = <&ahb_gates 49>, <&gmac_tx_clk>; + clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>; clock-names = "stmmaceth", "allwinner_gmac_tx"; snps,pbl = <2>; snps,fixed-burst; @@ -1678,20 +1255,20 @@ #size-cells = <0>; }; - hstimer@01c60000 { + hstimer@1c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = , , , ; - clocks = <&ahb_gates 28>; + clocks = <&ccu CLK_AHB_HSTIMER>; }; - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -1699,20 +1276,164 @@ interrupts = ; }; - ps20: ps2@01c2a000 { - compatible = "allwinner,sun4i-a10-ps2"; - reg = <0x01c2a000 0x400>; - interrupts = ; - clocks = <&apb1_gates 6>; - status = "disabled"; + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun7i-a20-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_DRAM_DE_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; }; - ps21: ps2@01c2a400 { - compatible = "allwinner,sun4i-a10-ps2"; - reg = <0x01c2a400 0x400>; - interrupts = ; - clocks = <&apb1_gates 7>; - status = "disabled"; + fe1: display-frontend@1e20000 { + compatible = "allwinner,sun7i-a20-display-frontend"; + reg = <0x01e20000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>, + <&ccu CLK_DRAM_DE_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe1>; + }; + + fe1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe1>; + }; + }; + }; + }; + + be1: display-backend@1e40000 { + compatible = "allwinner,sun7i-a20-display-backend"; + reg = <0x01e40000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>, + <&ccu CLK_DRAM_DE_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be1>; + }; + + be1_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be1>; + }; + + be1_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be1>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + compatible = "allwinner,sun7i-a20-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_DRAM_DE_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + be0_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + + be0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be0>; + }; + }; + }; }; }; }; diff --git a/include/dt-bindings/clock/sun7i-a20-ccu.h b/include/dt-bindings/clock/sun7i-a20-ccu.h new file mode 100644 index 0000000000..045a5178da --- /dev/null +++ b/include/dt-bindings/clock/sun7i-a20-ccu.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2017 Priit Laes + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUN7I_A20_H_ +#define _DT_BINDINGS_CLK_SUN7I_A20_H_ + +#include + +#define CLK_MBUS 166 +#define CLK_HDMI1_SLOW 167 +#define CLK_HDMI1 168 +#define CLK_OUT_A 169 +#define CLK_OUT_B 170 + +#endif /* _DT_BINDINGS_CLK_SUN7I_A20_H_ */ -- 2.25.1