From b818d9ab8d96471c40ccbd4541a46dfa415eda73 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 5 Feb 2014 10:24:25 -0500 Subject: [PATCH] dra7xx_evm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage Add a README to the board which lists the commands required to enable booting from the eMMC boot partitions found on the board. Cc: Lokesh Vutla Signed-off-by: Tom Rini Signed-off-by: Pantelis Antoniou --- board/ti/dra7xx/README | 25 +++++++++++++++++++++++++ include/configs/dra7xx_evm.h | 2 ++ 2 files changed, 27 insertions(+) create mode 100644 board/ti/dra7xx/README diff --git a/board/ti/dra7xx/README b/board/ti/dra7xx/README new file mode 100644 index 0000000000..2fdaeac31e --- /dev/null +++ b/board/ti/dra7xx/README @@ -0,0 +1,25 @@ +Summary +======= + +This document covers various features of the 'dra7xx_evm' build and some +related uses. + +eMMC boot partition use +======================= + +It is possible, depending on SYSBOOT configuration to boot from the eMMC +boot partitions using (name depending on documentation referenced) +Alternative Boot operation mode or Boot Sequence Option 1/2. In this +example we load MLO and u-boot.img from the build into DDR and then use +'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to +set boot0 as the boot device. +U-Boot # setenv autoload no +U-Boot # usb start +U-Boot # dhcp +U-Boot # mmc dev 1 1 +U-Boot # tftp ${loadaddr} dra7xx/MLO +U-Boot # mmc write ${loadaddr} 0 100 +U-Boot # tftp ${loadaddr} dra7xx/u-boot.img +U-Boot # mmc write ${loadaddr} 300 400 +U-Boot # mmc bootbus 1 2 0 2 +U-Boot # mmc partconf 1 1 1 0 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index f210ed8b92..3c53f0af10 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -73,6 +73,8 @@ #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SUPPORT_EMMC_BOOT + /* USB xHCI HOST */ #define CONFIG_CMD_USB #define CONFIG_USB_HOST -- 2.25.1