From b7d6e104fbfd54b7ffe9e0a00200e98dd2904a65 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Thu, 23 Apr 2020 22:30:53 +0530 Subject: [PATCH] spi: sifive: Add spi-mem exec op SiFive SPI controller is responsible to handle the slave devices like mmc spi and spi nor flash. The controller is designed such a way that it would handle the slave transactions based on the I/O protocol numbers, example if spi nor slave send quad write opcode it has to send alone with I/O protocol number of 4 and if it try to send data it has to send I/O protocol number along with 4 line data. But the current spi-xfer code from spi-mem is combining the opcode and address in a single transaction, so the SPI controller will be unable to identify the I/O protocol number of opcode vs address. So, add the spi-mem exec_op with spi-xfer of opcode, address and data as a separate transaction. This doesn't remove the .xfer of dm_spi_ops since mmc spi will make use of it. Note: This code might have moved to the spi-mem core area once we have done the dedicated tests on other controllers and have real reason to move. Cc: Vignesh R Signed-off-by: Jagan Teki Tested-by: Sagar Kadam --- drivers/spi/spi-sifive.c | 75 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 74 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c index 8f5efb51a3..5e612edcff 100644 --- a/drivers/spi/spi-sifive.c +++ b/drivers/spi/spi-sifive.c @@ -8,8 +8,9 @@ #include #include +#include #include -#include +#include #include #include #include @@ -241,6 +242,73 @@ static int sifive_spi_xfer(struct udevice *dev, unsigned int bitlen, return 0; } +static int sifive_spi_exec_op(struct spi_slave *slave, + const struct spi_mem_op *op) +{ + struct udevice *dev = slave->dev; + unsigned long flags = SPI_XFER_BEGIN; + u8 opcode = op->cmd.opcode; + unsigned int pos = 0; + const void *tx_buf = NULL; + void *rx_buf = NULL; + int op_len, i; + int ret; + + if (!op->addr.nbytes && !op->dummy.nbytes && !op->data.nbytes) + flags |= SPI_XFER_END; + + /* send the opcode */ + ret = sifive_spi_xfer(dev, 8, (void *)&opcode, NULL, flags); + if (ret < 0) { + dev_err(dev, "failed to xfer opcode\n"); + return ret; + } + + op_len = op->addr.nbytes + op->dummy.nbytes; + u8 op_buf[op_len]; + + /* send the addr + dummy */ + if (op->addr.nbytes) { + /* fill address */ + for (i = 0; i < op->addr.nbytes; i++) + op_buf[pos + i] = op->addr.val >> + (8 * (op->addr.nbytes - i - 1)); + + pos += op->addr.nbytes; + + /* fill dummy */ + if (op->dummy.nbytes) + memset(op_buf + pos, 0xff, op->dummy.nbytes); + + /* make sure to set end flag, if no data bytes */ + if (!op->data.nbytes) + flags |= SPI_XFER_END; + + ret = sifive_spi_xfer(dev, op_len * 8, op_buf, NULL, flags); + if (ret < 0) { + dev_err(dev, "failed to xfer addr + dummy\n"); + return ret; + } + } + + /* send/received the data */ + if (op->data.nbytes) { + if (op->data.dir == SPI_MEM_DATA_IN) + rx_buf = op->data.buf.in; + else + tx_buf = op->data.buf.out; + + ret = sifive_spi_xfer(dev, op->data.nbytes * 8, + tx_buf, rx_buf, SPI_XFER_END); + if (ret) { + dev_err(dev, "failed to xfer data\n"); + return ret; + } + } + + return 0; +} + static int sifive_spi_set_speed(struct udevice *bus, uint speed) { struct sifive_spi *spi = dev_get_priv(bus); @@ -348,11 +416,16 @@ static int sifive_spi_probe(struct udevice *bus) return 0; } +static const struct spi_controller_mem_ops sifive_spi_mem_ops = { + .exec_op = sifive_spi_exec_op, +}; + static const struct dm_spi_ops sifive_spi_ops = { .xfer = sifive_spi_xfer, .set_speed = sifive_spi_set_speed, .set_mode = sifive_spi_set_mode, .cs_info = sifive_spi_cs_info, + .mem_ops = &sifive_spi_mem_ops, }; static const struct udevice_id sifive_spi_ids[] = { -- 2.25.1