From b7539ab109fc2cb9ab8ad7a2fa82f4a856e03df7 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 22 Feb 2014 16:17:28 +0000 Subject: [PATCH] ar71xx: spi-ath79: fix initial GPIO CS line setup Signed-off-by: Gabor Juhos SVN-Revision: 39695 --- ...ath79-fix-initial-GPIO-CS-line-setup.patch | 37 +++++++++++++++++++ ...-make-chipselect-logic-more-flexible.patch | 4 +- 2 files changed, 39 insertions(+), 2 deletions(-) create mode 100644 target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch diff --git a/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch b/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch new file mode 100644 index 0000000000..46657940b8 --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch @@ -0,0 +1,37 @@ +From 3a7853f0dd24e81dc920c98a5c7e8cfdde81bb45 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Thu, 16 Jan 2014 16:58:58 +0100 +Subject: [PATCH] spi-ath79: fix initial GPIO CS line setup + +The 'ath79_spi_setup_cs' function initializes the chip +select line of a given SPI device in order to make sure +that the device is inactive. + +If the SPI_CS_HIGH bit is set for a given device, it +means that the CS line of that device is active HIGH +so it must be set to LOW initially. In case of GPIO +CS lines, the 'ath79_spi_setup_cs' function does the +opposite of that due to the wrong GPIO flags. + +Fix the code to use the correct GPIO flags. + +Reported-by: Ronald Wahl +Signed-off-by: Gabor Juhos +--- + drivers/spi/spi-ath79.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -132,9 +132,9 @@ static int ath79_spi_setup_cs(struct spi + + flags = GPIOF_DIR_OUT; + if (spi->mode & SPI_CS_HIGH) +- flags |= GPIOF_INIT_HIGH; +- else + flags |= GPIOF_INIT_LOW; ++ else ++ flags |= GPIOF_INIT_HIGH; + + status = gpio_request_one(cdata->gpio, flags, + dev_name(&spi->dev)); diff --git a/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch index 93df466fdf..b57dd5d5ba 100644 --- a/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch +++ b/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch @@ -236,9 +236,9 @@ Signed-off-by: Gabor Juhos + case ATH79_SPI_CS_TYPE_GPIO: flags = GPIOF_DIR_OUT; if (spi->mode & SPI_CS_HIGH) - flags |= GPIOF_INIT_HIGH; - else flags |= GPIOF_INIT_LOW; + else + flags |= GPIOF_INIT_HIGH; - status = gpio_request_one(cdata->gpio, flags, + status = gpio_request_one(cdata->cs_line, flags, -- 2.25.1