From b710d9d6c2921982a448903d3c10a14d6ee22ae3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 28 Jun 2012 14:34:32 +0200 Subject: [PATCH] microblaze: Add support for device tree driven board configuration This is minimum code required to be able to use device-tree for u-boot initialization. Currently only for device driver initialization. Linker script change ensures DTB to be aligned for both options CONFIG_OF_EMBED and CONFIG_OF_SEPARATE. Signed-off-by: Michal Simek Acked-by: Stephan Linz CC: Simon Glass --- arch/microblaze/config.mk | 2 ++ arch/microblaze/cpu/u-boot.lds | 1 + arch/microblaze/include/asm/global_data.h | 1 + arch/microblaze/lib/board.c | 24 +++++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index aca79e2619..b4935f0a56 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -31,3 +31,5 @@ CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds + +CONFIG_ARCH_DEVICE_TREE := microblaze diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index ee41145bb5..d033a2835b 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -45,6 +45,7 @@ SECTIONS .data ALIGN(0x4): { __data_start = .; + dts/libdts.o (.data) *(.data) __data_end = .; } diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h index 0dc4ce9ee5..de3b8dbe92 100644 --- a/arch/microblaze/include/asm/global_data.h +++ b/arch/microblaze/include/asm/global_data.h @@ -41,6 +41,7 @@ typedef struct global_data { unsigned long precon_buf_idx; /* Pre-Console buffer index */ #endif unsigned long env_addr; /* Address of Environment struct */ + const void *fdt_blob; /* Our device tree, NULL if none */ unsigned long env_valid; /* Checksum of Environment valid? */ unsigned long fb_base; /* base address of frame buffer */ void **jt; /* jump table */ diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index b80250a6bc..942e18c2c7 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -34,6 +34,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -63,6 +64,9 @@ typedef int (init_fnc_t) (void); init_fnc_t *init_sequence[] = { env_init, +#ifdef CONFIG_OF_CONTROL + fdtdec_check_fdt, +#endif serial_init, console_init_f, #ifdef CONFIG_SYS_GPIO_0 @@ -103,6 +107,17 @@ void board_init (void) monitor_flash_len = __end - __text_start; +#ifdef CONFIG_OF_EMBED + /* Get a pointer to the FDT */ + gd->fdt_blob = _binary_dt_dtb_start; +#elif defined CONFIG_OF_SEPARATE + /* FDT is at end of image */ + gd->fdt_blob = (void *)__end; +#endif + /* Allow the early environment to override the fdt address */ + gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, + (uintptr_t)gd->fdt_blob); + /* * The Malloc area is immediately below the monitor copy in DRAM * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off @@ -121,6 +136,15 @@ void board_init (void) } } +#ifdef CONFIG_OF_CONTROL + /* For now, put this check after the console is ready */ + if (fdtdec_prepare_fdt()) { + panic("** CONFIG_OF_CONTROL defined but no FDT - please see " + "doc/README.fdt-control"); + } else + printf("DTB: 0x%x\n", (u32)gd->fdt_blob); +#endif + puts ("SDRAM :\n"); printf ("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF"); printf ("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF"); -- 2.25.1