From b614e16cc07113dc890ecc83649b89da1bced464 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 19 Dec 2014 20:20:52 +0900 Subject: [PATCH] ARM: UniPhier: add DDR PHY training code This training code provides run-time adjustment of DDR PHY parameters for stable DDR operation. Signed-off-by: Masahiro Yamada --- arch/arm/cpu/armv7/uniphier/Makefile | 1 + arch/arm/cpu/armv7/uniphier/ddrphy_training.c | 144 +++++++++++++++ arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 2 +- .../cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c | 70 +++++++ .../arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c | 13 ++ arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 2 +- .../cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c | 70 +++++++ .../cpu/armv7/uniphier/ph1-pro4/umc_init.c | 25 +++ arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 2 +- .../cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c | 75 ++++++++ .../cpu/armv7/uniphier/ph1-sld8/umc_init.c | 13 ++ .../include/asm/arch-uniphier/ddrphy-regs.h | 172 ++++++++++++++++++ 12 files changed, 586 insertions(+), 3 deletions(-) create mode 100644 arch/arm/cpu/armv7/uniphier/ddrphy_training.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c create mode 100644 arch/arm/include/asm/arch-uniphier/ddrphy-regs.h diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile index 4a7b8a9d08..1d8469608b 100644 --- a/arch/arm/cpu/armv7/uniphier/Makefile +++ b/arch/arm/cpu/armv7/uniphier/Makefile @@ -10,6 +10,7 @@ obj-y += reset.o obj-y += cache_uniphier.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o obj-y += dram_init.o +obj-$(CONFIG_DRAM_INIT) += ddrphy_training.o obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ddrphy_training.c b/arch/arm/cpu/armv7/uniphier/ddrphy_training.c new file mode 100644 index 0000000000..cc8b8ad648 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ddrphy_training.c @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank) +{ + int dx; + u32 __iomem tmp, *p; + + for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) { + p = &phy->dx[dx].gcr; + + tmp = readl(p); + /* Specify the rank that should be write leveled */ + tmp &= ~DXGCR_WLRKEN_MASK; + tmp |= (1 << (DXGCR_WLRKEN_SHIFT + rank)) & DXGCR_WLRKEN_MASK; + writel(tmp, p); + } + + p = &phy->dtcr; + + tmp = readl(p); + /* Specify the rank used during data bit deskew and eye centering */ + tmp &= ~DTCR_DTRANK_MASK; + tmp |= (rank << DTCR_DTRANK_SHIFT) & DTCR_DTRANK_MASK; + /* Use Multi-Purpose Register for DQS gate training */ + tmp |= DTCR_DTMPR; + /* Specify the rank enabled for data-training */ + tmp &= ~DTCR_RNKEN_MASK; + tmp |= (1 << (DTCR_RNKEN_SHIFT + rank)) & DTCR_RNKEN_MASK; + writel(tmp, p); +} + +struct ddrphy_init_sequence { + char *description; + u32 init_flag; + u32 done_flag; + u32 err_flag; +}; + +static struct ddrphy_init_sequence init_sequence[] = { + { + "DRAM Initialization", + PIR_DRAMRST | PIR_DRAMINIT, + PGSR0_DIDONE, + PGSR0_DIERR + }, + { + "Write Leveling", + PIR_WL, + PGSR0_WLDONE, + PGSR0_WLERR + }, + { + "Read DQS Gate Training", + PIR_QSGATE, + PGSR0_QSGDONE, + PGSR0_QSGERR + }, + { + "Write Leveling Adjustment", + PIR_WLADJ, + PGSR0_WLADONE, + PGSR0_WLAERR + }, + { + "Read Bit Deskew", + PIR_RDDSKW, + PGSR0_RDDONE, + PGSR0_RDERR + }, + { + "Write Bit Deskew", + PIR_WRDSKW, + PGSR0_WDDONE, + PGSR0_WDERR + }, + { + "Read Eye Training", + PIR_RDEYE, + PGSR0_REDONE, + PGSR0_REERR + }, + { + "Write Eye Training", + PIR_WREYE, + PGSR0_WEDONE, + PGSR0_WEERR + } +}; + +int ddrphy_training(struct ddrphy __iomem *phy) +{ + int i; + u32 pgsr0; + u32 init_flag = PIR_INIT; + u32 done_flag = PGSR0_IDONE; + int timeout = 50000; /* 50 msec is long enough */ +#ifdef DISPLAY_ELAPSED_TIME + ulong start = get_timer(0); +#endif + + for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { + init_flag |= init_sequence[i].init_flag; + done_flag |= init_sequence[i].done_flag; + } + + writel(init_flag, &phy->pir); + + do { + if (--timeout < 0) { +#ifndef CONFIG_SPL_BUILD + printf("%s: error: timeout during DDR training\n", + __func__); +#endif + return -1; + } + udelay(1); + pgsr0 = readl(&phy->pgsr[0]); + } while ((pgsr0 & done_flag) != done_flag); + + for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { + if (pgsr0 & init_sequence[i].err_flag) { +#ifndef CONFIG_SPL_BUILD + printf("%s: error: %s failed\n", __func__, + init_sequence[i].description); +#endif + return -1; + } + } + +#ifdef DISPLAY_ELAPSED_TIME + printf("%s: info: elapsed time %ld msec\n", get_timer(start)); +#endif + + return 0; +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index 5d682d3ca3..8794629b2a 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -8,4 +8,4 @@ obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o -obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c new file mode 100644 index 0000000000..60fc5ad6ea --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8253c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a82dbc0, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + + writel(0x00000800, &phy->mr3); + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c index ebcbaabf65..87889160a7 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c @@ -7,6 +7,7 @@ #include #include #include +#include static inline void umc_start_ssif(void __iomem *ssif_base) { @@ -125,6 +126,8 @@ static inline int umc_init_sub(int freq, int size_ch0, int size_ch1) void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); umc_dram_init_start(dramcont0); umc_dram_init_start(dramcont1); @@ -133,8 +136,18 @@ static inline int umc_init_sub(int freq, int size_ch0, int size_ch1) writel(0x00000101, dramcont0 + UMC_DIOCTLA); + ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 1); + ddrphy_training(phy1_0); + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index fd1c432f4f..cee78781f6 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -7,4 +7,4 @@ obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o -obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c new file mode 100644 index 0000000000..c5d1f606cf --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8363c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a878400, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + + writel(0x00000000, &phy->mr3); + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c index 328b2f4d9a..1973ab04c2 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c @@ -7,6 +7,7 @@ #include #include #include +#include static inline void umc_start_ssif(void __iomem *ssif_base) { @@ -94,6 +95,10 @@ static inline int umc_init_sub(int freq, int size_ch0, int size_ch1) void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); + void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1); umc_dram_init_start(dramcont0); umc_dram_init_start(dramcont1); @@ -102,12 +107,32 @@ static inline int umc_init_sub(int freq, int size_ch0, int size_ch1) writel(0x00000101, dramcont0 + UMC_DIOCTLA); + ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + writel(0x00000103, dramcont0 + UMC_DIOCTLA); + ddrphy_init(phy0_1, freq, size_ch0); + + ddrphy_prepare_training(phy0_1, 1); + ddrphy_training(phy0_1); + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 0); + ddrphy_training(phy1_0); + writel(0x00000103, dramcont1 + UMC_DIOCTLA); + ddrphy_init(phy1_1, freq, size_ch1); + + ddrphy_prepare_training(phy1_1, 1); + ddrphy_training(phy1_1); + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index 5d682d3ca3..8794629b2a 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -8,4 +8,4 @@ obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o -obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c new file mode 100644 index 0000000000..a5eafef9a8 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/ddrphy_init.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8363c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a878400, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + +#ifdef CONFIG_DDR_STANDARD + writel(0x00000000, &phy->mr3); +#else + writel(0x00000800, &phy->mr3); +#endif + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c index a44f999fbf..2e0f9aeaa5 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c @@ -7,6 +7,7 @@ #include #include #include +#include static inline void umc_start_ssif(void __iomem *ssif_base) { @@ -105,6 +106,8 @@ static inline int umc_init_sub(int freq, int size_ch0, int size_ch1) void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); umc_dram_init_start(dramcont0); umc_dram_init_start(dramcont1); @@ -113,8 +116,18 @@ static inline int umc_init_sub(int freq, int size_ch0, int size_ch1) writel(0x00000101, dramcont0 + UMC_DIOCTLA); + ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 1); + ddrphy_training(phy1_0); + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); diff --git a/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h b/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h new file mode 100644 index 0000000000..484559c6cd --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h @@ -0,0 +1,172 @@ +/* + * UniPhier DDR PHY registers + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_DDRPHY_REGS_H +#define ARCH_DDRPHY_REGS_H + +#include + +#ifndef __ASSEMBLY__ + +struct ddrphy { + u32 ridr; /* Revision Identification Register */ + u32 pir; /* PHY Initialixation Register */ + u32 pgcr[2]; /* PHY General Configuration Register */ + u32 pgsr[2]; /* PHY General Status Register */ + u32 pllcr; /* PLL Control Register */ + u32 ptr[5]; /* PHY Timing Register */ + u32 acmdlr; /* AC Master Delay Line Register */ + u32 acbdlr; /* AC Bit Delay Line Register */ + u32 aciocr; /* AC I/O Configuration Register */ + u32 dxccr; /* DATX8 Common Configuration Register */ + u32 dsgcr; /* DDR System General Configuration Register */ + u32 dcr; /* DRAM Configuration Register */ + u32 dtpr[3]; /* DRAM Timing Parameters Register */ + u32 mr0; /* Mode Register 0 */ + u32 mr1; /* Mode Register 1 */ + u32 mr2; /* Mode Register 2 */ + u32 mr3; /* Mode Register 3 */ + u32 odtcr; /* ODT Configuration Register */ + u32 dtcr; /* Data Training Configuration Register */ + u32 dtar[4]; /* Data Training Address Register */ + u32 dtdr[2]; /* Data Training Data Register */ + u32 dtedr[2]; /* Data Training Eye Data Register */ + u32 rsv0[13]; /* Reserved */ + u32 dcuar; /* DCU Address Register */ + u32 dcudr; /* DCU Data Register */ + u32 dcurr; /* DCU Run Register */ + u32 dculr; /* DCU Loop Register */ + u32 dcugcr; /* DCU General Configuration Register */ + u32 dcutpr; /* DCU Timing Parameters Register */ + u32 dcusr[2]; /* DCU Status Register */ + u32 rsv1[8]; /* Reserved */ + u32 bistrr; /* BIST Run Register */ + u32 bistwcr; /* BIST Word Count Register */ + u32 bistmskr[3]; /* BIST Mask Register */ + u32 bistlsr; /* BIST LFSR Sed Register */ + u32 bistar[3]; /* BIST Address Register */ + u32 bistudpr; /* BIST User Data Pattern Register */ + u32 bistgsr; /* BIST General Status Register */ + u32 bistwer; /* BIST Word Error Register */ + u32 bistber[4]; /* BIST Bit Error Register */ + u32 bistwcsr; /* BIST Word Count Status Register */ + u32 bistfwr[3]; /* BIST Fail Word Register */ + u32 rsv2[10]; /* Reserved */ + u32 gpr[2]; /* General Purpose Register */ + struct ddrphy_zq { /* ZQ */ + u32 cr[2]; /* Impedance Control Register */ + u32 sr[2]; /* Impedance Status Register */ + } zq[4]; + struct ddrphy_datx8 { /* DATX8 */ + u32 gcr; /* General Configuration Register */ + u32 gsr[2]; /* General Status Register */ + u32 bdlr[5]; /* Bit Delay Line Register */ + u32 lcdlr[3]; /* Local Calibrated Delay Line Register */ + u32 mdlr; /* Master Delay Line Register */ + u32 gtr; /* General Timing Register */ + u32 rsv[3]; /* Reserved */ + } dx[9]; +} __packed; + +#endif /* __ASSEMBLY__ */ + +#define PIR_INIT (1 << 0) /* Initialization Trigger */ +#define PIR_ZCAL (1 << 1) /* Impedance Calibration */ +#define PIR_PLLINIT (1 << 4) /* PLL Initialization */ +#define PIR_DCAL (1 << 5) /* DDL Calibration */ +#define PIR_PHYRST (1 << 6) /* PHY Reset */ +#define PIR_DRAMRST (1 << 7) /* DRAM Reset */ +#define PIR_DRAMINIT (1 << 8) /* DRAM Initialization */ +#define PIR_WL (1 << 9) /* Write Leveling */ +#define PIR_QSGATE (1 << 10) /* Read DQS Gate Training */ +#define PIR_WLADJ (1 << 11) /* Write Leveling Adjust */ +#define PIR_RDDSKW (1 << 12) /* Read Data Bit Deskew */ +#define PIR_WRDSKW (1 << 13) /* Write Data Bit Deskew */ +#define PIR_RDEYE (1 << 14) /* Read Data Eye Training */ +#define PIR_WREYE (1 << 15) /* Write Data Eye Training */ +#define PIR_LOCKBYP (1 << 28) /* PLL Lock Bypass */ +#define PIR_DCALBYP (1 << 29) /* DDL Calibration Bypass */ +#define PIR_ZCALBYP (1 << 30) /* Impedance Calib Bypass */ +#define PIR_INITBYP (1 << 31) /* Initialization Bypass */ + +#define PGSR0_IDONE (1 << 0) /* Initialization Done */ +#define PGSR0_PLDONE (1 << 1) /* PLL Lock Done */ +#define PGSR0_DCDONE (1 << 2) /* DDL Calibration Done */ +#define PGSR0_ZCDONE (1 << 3) /* Impedance Calibration Done */ +#define PGSR0_DIDONE (1 << 4) /* DRAM Initialization Done */ +#define PGSR0_WLDONE (1 << 5) /* Write Leveling Done */ +#define PGSR0_QSGDONE (1 << 6) /* DQS Gate Training Done */ +#define PGSR0_WLADONE (1 << 7) /* Write Leveling Adjust Done */ +#define PGSR0_RDDONE (1 << 8) /* Read Bit Deskew Done */ +#define PGSR0_WDDONE (1 << 9) /* Write Bit Deskew Done */ +#define PGSR0_REDONE (1 << 10) /* Read Eye Training Done */ +#define PGSR0_WEDONE (1 << 11) /* Write Eye Training Done */ +#define PGSR0_IERR (1 << 16) /* Initialization Error */ +#define PGSR0_PLERR (1 << 17) /* PLL Lock Error */ +#define PGSR0_DCERR (1 << 18) /* DDL Calibration Error */ +#define PGSR0_ZCERR (1 << 19) /* Impedance Calib Error */ +#define PGSR0_DIERR (1 << 20) /* DRAM Initialization Error */ +#define PGSR0_WLERR (1 << 21) /* Write Leveling Error */ +#define PGSR0_QSGERR (1 << 22) /* DQS Gate Training Error */ +#define PGSR0_WLAERR (1 << 23) /* Write Leveling Adj Error */ +#define PGSR0_RDERR (1 << 24) /* Read Bit Deskew Error */ +#define PGSR0_WDERR (1 << 25) /* Write Bit Deskew Error */ +#define PGSR0_REERR (1 << 26) /* Read Eye Training Error */ +#define PGSR0_WEERR (1 << 27) /* Write Eye Training Error */ +#define PGSR0_DTERR_SHIFT 28 /* Data Training Error Status*/ +#define PGSR0_DTERR (7 << (PGSR0_DTERR_SHIFT)) +#define PGSR0_APLOCK (1 << 31) /* AC PLL Lock */ + +#define DXCCR_DQSRES_OPEN (0 << 5) +#define DXCCR_DQSRES_688_OHM (1 << 5) +#define DXCCR_DQSRES_611_OHM (2 << 5) +#define DXCCR_DQSRES_550_OHM (3 << 5) +#define DXCCR_DQSRES_500_OHM (4 << 5) +#define DXCCR_DQSRES_458_OHM (5 << 5) +#define DXCCR_DQSRES_393_OHM (6 << 5) +#define DXCCR_DQSRES_344_OHM (7 << 5) + +#define DXCCR_DQSNRES_OPEN (0 << 9) +#define DXCCR_DQSNRES_688_OHM (1 << 9) +#define DXCCR_DQSNRES_611_OHM (2 << 9) +#define DXCCR_DQSNRES_550_OHM (3 << 9) +#define DXCCR_DQSNRES_500_OHM (4 << 9) +#define DXCCR_DQSNRES_458_OHM (5 << 9) +#define DXCCR_DQSNRES_393_OHM (6 << 9) +#define DXCCR_DQSNRES_344_OHM (7 << 9) + +#define DTCR_DTRANK_SHIFT 4 /* Data Training Rank */ +#define DTCR_DTRANK_MASK (0x3 << (DTCR_DTRANK_SHIFT)) +#define DTCR_DTMPR (1 << 6) /* Data Training using MPR */ +#define DTCR_RNKEN_SHIFT 24 /* Rank Enable */ +#define DTCR_RNKEN_MASK (0xf << (DTCR_RNKEN_SHIFT)) + +#define DXGCR_WLRKEN_SHIFT 26 /* Write Level Rank Enable */ +#define DXGCR_WLRKEN_MASK (0xf << (DXGCR_WLRKEN_SHIFT)) + +/* SoC-specific parameters */ +#define NR_DATX8_PER_DDRPHY 2 + +#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#define NR_DDRPHY_PER_CH 1 +#else +#define NR_DDRPHY_PER_CH 2 +#endif + +#define NR_DDRCH 2 + +#define DDRPHY_BASE(ch, phy) (0x5bc01000 + 0x200000 * (ch) + 0x1000 * (phy)) + +#ifndef __ASSEMBLY__ +void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank); +int ddrphy_training(struct ddrphy __iomem *phy); +#endif + +#endif /* ARCH_DDRPHY_REGS_H */ -- 2.25.1